2018 SHOEI Catalog from Helmet House by Helmet House Inc.

FULL-FACE HELMETS

SOLIDS/MATTE BLACK, WHITE, MATTE BLACK Page 12

GRAPHICS BRADLEY3 TC-1 BRINK TC-1, TC-2, TC-5, TC-10 MARQUEZ MOTEGI 2 TC-1 MARQUEZ4 TC-1, TC-6 LAVERTY TC-4 KAGAYAMA5 TC-2, TC-5 LAWSON TC-1 Limited Edition RAINEY TC-1 Limited Edition Pages 13-15 ®

SOLIDS/MATTE/METALLICS BLACK, WHITE, ANTHRACITE, SILVER, MATTE BLACK, BRILLIANT YELLOW, SHINE RED Page 18

GRAPHICS DECADE TC-1 DAUNTLESS TC-1, TC-10, TC-11 EXPANSE TC-1, TC-4, TC-6, TC-10 PENDULUM TC-1, TC-3, TC-5, TC-6, TC-10 SWAYER TC-1, TC-2, TC-3, TC-5 Pages 19-21 ®

SOLIDS/MATTES/METALLICS BLACK, WHITE, MATTE BLACK, LIGHT SILVER, WINE RED, BLACK METALLIC, SHINE RED, ANTHRACITE METALLIC, BRILLIANT YELLOW, MATTE DEEP GREY Pages 24-25

GRAPHICS FLAGGER TC-1, TC-2, TC-3, TC-4, TC-5, TC-6 INCISION TC-1, TC-5, TC-6 MARQUEZ POWER UP! TC-1 INTENSE TC-7 PARAMETER TC-1, TC-2, TC-3, TC-5, TC-8 RECOUNTER TC-5, TC-10 RUTS TC-5, TC-6 TROOPER TC-1, TC-10 Pages 26-28

SOLID/MATTE BLACK, MATTE BLACK 3XL SIZE ONLY

SOLID/MATTE BLACK, WHITE, TANGERINE, MATTE BLUE, MATTE DEEP GREY, MATTE BLACK, BASALT GREY,

Page 29

Page 32-33

SOLIDS/MATTES/ METALLICS/GRAPHIC BLACK, WHITE, WINE RED, ANTHRACITE METALLIC, LIGHT SILVER, MATTE BLACK, MATTE BLUE METALLIC, MATTE DEEP GREY EXCURSION TC-3, TC-5, TC-6

SRL (SHOEI RIDER LINK) COMMUNICATION SYSTEM for NEOTEC II Page 39

Pages 36-38

toll free / 1-800-421-7247 online / www.helmethouse.com

OPEN-FACE and OFF-ROAD HELMETS ®

SOLIDS/MATTES/METALLICS/ GRAPHIC BLACK, WHITE, ANTHRACITE, MATTE BLACK, WINE RED, BRILLIANT YELLOW, MATTE DEEP GREY REBORN TC-1, TC-5

CJ-2SP SHIELD V-440 VISOR Page 43

Page 42

SOLIDS/MATTES/METALLICS BLACK, WHITE, ANTHRACITE METALLIC, LIGHT SILVER, MATTE BLACK, WINE RED, MATTE DEEP GREY, PEARL GREY, CRYSTAL WHITE Pages 44-45

SOLIDS/MATTES/ METALLIC BLACK, WHITE, SILVER, MATTE BLACK, MATTE DEEP GREY GRAPHICS NAVIGATE TC-2, TC-3, TC-5, TC-8 Pages 48-49

SOLIDS/MATTE/ METALLICS BLACK, WHITE, MATTE BLACK Page 52

GRAPHICS BLAZON TC-1, TC-5, TC-6 GLAIVE TC-1, TC-2, TC-5, TC-8 GRANT 3 TC-1, TC-2, TC-3 ZINGER TC-1, TC-2, TC-10 Pages 53-54

PHOTOCHROMIC SHIELD with PINLOCK® PINS CWR-1 Pages 56-57

FOG RESISTANT SHIELD & LENS for SHOEI FULL-FACE HELMETS CLEAR, DARK SMOKE, LIGHT SMOKE, AMBER, YELLOW Page 58

ADVANCED TECHNOLOGY

SAFETY, DESIGN and PASSION SHOEI helmets take their form from state-of-the-art technology combined with nearly 60 years of helmet building experience, using the most advanced materials available. With safety, comfort, and passion in mind, SHOEI product development always takes customer feedback, demands of the market, and new trends into consideration. Although safety and functionality always play the dominant role, the design aspect is never neglected. This special combination of perfect functionality, unique design, and unsurpassed quality standards are testimony to the passion that SHOEI has for motorcycle riders worldwide.

PRODUCTION and QUALITY ASSURANCE For all the energy and passion invested into the development of a product, the same level of care and due diligence must be achieved during the production process. A number of unique, state-of-the-art processes combine to yield the unrivaled quality that only SHOEI helmets are known for, and each helmet must pass several rigorous inspections throughout the production process before being awarded the famous SHOEI hexagon. The actual production of a single SHOEI helmet takes up to five days.

AIM+ (Advanced Integrated Matrix Plus Multi-Fiber), a high performance combination of new and advanced shell materials, produces a lightweight shell with increased elasticity and rigidity. This reduces both inertia and impact energy in an accident, and makes for a strong, lightweight shell. ROBOTIC LASER CUTTING gives each helmet its final shape. All protrusions created in manufacturing are cut off, and the openings for the shield and ventilation systems are cut into the helmet shell with robotically-controlled lasers. Once this process is complete, all helmets are thoroughly inspected to ensure that they have the correct material thickness and weight. SHOEIâ&#x20AC;&#x2122;S PAINTING AND GRAPHIC APPLICATION processes are second to none. Though some of our production steps have been automated today, it is absolutely critical that many processes are still completed by hand. Combining meticulous handwork and automation in production ensures optimal quality, and each SHOEI helmet still boasts a premium-painted finish with hand-applied decals before being sealed with additional layers of clearcoat. SHOEI applies up to five layers of paint to each helmet.

FINAL ASSEMBLY of each helmet is done with care and precision, including the installation of ventilation sliders, shield seals, impact absorbing EPS liners, and comfort interiors. Each helmet passes a detailed final inspection before being passed on to the consumer. This strict compliance with the production processes and associated quality control standards guarantee the consistently high quality of a SHOEI helmet. ÂŠ2018 Helmet House, Inc

AERODYNAMICS

Motorcyclists live in a stream of moving air, which is precisely why every SHOEI model undergoes extensive aerodynamic testing in SHOEI’s very own wind tunnel. In addition to the shell, the aerodynamic efficiency of spoilers and vents are also analyzed in SHOEI’s wind tunnel for optimal performance. As a result, every SHOEI helmet boasts an aerodynamic design that increases air flow and reduces noise, buffeting, and lift, ultimately increasing performance and overall rider comfort.

VENTILATION

An integral part of the development process, SHOEI’s ventilation systems direct cooling, moisture-drying air into the helmet, and utilize areas of negative air pressure to the rear of the helmet to draw warm, damp air through the outlets and into the outside environment. Perfect shape and placement of vent inlets and outlets, along with air channels buried within SHOEI’s Dual-Layer EPS Liners, are the basis for optimum ventilation, and are a significant part of what separates SHOEI from the competition.

QR-E BASE PLATE SYSTEM SHOEI’s QR-E Base Plate System is one of the most advanced shield attachment mechanisms in the world. The simple shield release makes it easy to change your shield as conditions dictate. Also, widely appreciated is the convenience of SHOEI’s shield fine tuning adjustment dial. Each time the shield is lowered, the spring-loaded base plates pull the shield back to contact the window beading evenly, ensuring a wind and waterproof seal.

SpringLoaded Base Plates Fine-Tuning Adjustment Dial

CWR-F, CWR-1, CW-1, CWF-1, AND CNS-3 SHIELDS CWF-1

CW-1

CWR-1

CWR-F

The CWR-F shield, featured on SHOEI’s X-Fourteen helmet, sets a new standard in shield aerodynamics; like the Qwest helmet’s CW-1 shield, it is both taller and wider than the CX-1V it replaces. Both shields protect riders from 99% of the sun’s damaging UVA and UVB rays, and the CW-1’s three dimensional injection-molding process ensures distortion-free vision. All four shields work in conjunction with SHOEI’s optional Pinlock® system to deliver fog-free vision in even the most challenging conditions. The RF-1200’s and RF-SR’s CWR-1 shield offers all these features, plus innovative ribs on the top and bottom edges of the shield that improve rigidity and eliminate bending occuring from wind pressure, as well as opening and closing. The Pinlock®-ready CWR-F and CWF-1 shields provide a flat surface to accommodate tear-off sheets, while still ensuring a tight seal between the shield and the helmet’s window beading. Tear-off posts on the flat shields allow for tear-off tension to be adjusted without tools, making it easier and quicker to adjust racing tear-offs. The CNS-3, included with the NEOTEC II modular helmet, comes equipped with the Pinlock® EVO fog-resistant system, protects from 99% of the sun’s damaging UV rays, and provides improved air/water sealing and noise reduction.

CNS-3

10 ®

FULL-FACE ROAD RACE HELMET A E R O D Y N A M I C S • A D J U S TA B I L I T Y • V E N T I L AT I O N The flagship model of SHOEI’s premium helmet lineup, the X-Series, has earned the respect and praise of many of the world’s top road racers over the years, and the X-Fourteen is the next generation of this high-performance pedigree. Developed using rider input from the world’s top road racing athletes like Marc Marquez and Bradley Smith, careful consideration was given to every detail of the X-Fourteen. Technology continues to progress every aspect of a racer’s equipment, and the X-Fourteen’s next-level features set the new standard for performance, adjustability, and safety that today’s world-class athletes can trust all the way to the podium.

STAT E- O F - TH E- A RT AE R OD Y NA MICS

REPLACEABLE REAR FLAPS

Ask any engineer in the racing paddock, and they’ll tell you that one of the most important considerations in motorcycle design - the difference between winning and losing - is aerodynamics. The state-of-the-art wind tunnel facility at SHOEI’s Ibariki factory is an integral part of the helmet development process, and it was here that the aerodynamic performance of the X-Fourteen was born. Placing an emphasis on aerodynamic optimization in racing’s numerous riding positions, SHOEI engineers achieved the most aerodynamic and stable X-Series helmet yet. The X-Fourteen showcases an advanced shell shape, along with a completely redesigned Rear Stabilizer. The Patent-Pending Rear Stabilizer system features a standard set of Rear Flaps that can be replaced with an optional, narrower set of flaps to help fine-tune resistance and aerodynamic performance depending on rider preference and track demands. In addition, strategically placed ridges along the top of the shell and chin bar allow wind to stream off the helmet with minimal resistance, ultimately reducing drag and improving stability. Add to the mix a removable Lower Air Spoiler that can be affixed to the chin bar to further improve aerodynamic stabilization, and you’re left with the new standard for high-speed performance.

REMOVABLE LOWER AIR SPOILER

V E N T ILATION - A N E W S TA ND A R D

CHEEK PAD COOLING SYSTEM

Next-level ventilation performance was a top priority when SHOEI engineers conceptualized the X-Fourteen. Boasting six air intakes and six exhaust outlets - all strategically shaped and located to maximize airflow and negative air pressure suction to the rear of the helmet - the X-Fourteen’s ventilating prowess is second to none. The X-Fourteen’s high performance cheek pad cooling system delivers refreshing air to the rider’s cheek area, thanks to channels cut through the EPS liner and corresponding air holes located in the cheek pad foam. Combined with the newly positioned side air outlets (moved rearward to optimized hot air expulsion), the X-Fourteen’s ventilation system cools and clears warm, humid air from the rider’s face with great efficiency. Further enhancing the X-Fourteen’s advanced racing characteristics, the entire ventilation system has been optimized in SHOEI’s wind tunnel to excel when in the tucked racing position, even behind windscreens. ©2018 Helmet House, Inc

C WR - F S H IE L D / Q R - E B A S E P L ATE

SHIELD TAB and LOCK

The X-Fourteen’s CWR-F race shield provides a vast field of vision that today’s top racers demand. Innovative ribs on the top and bottom edge of the shield improve rigidity and eliminate the bending effect that may occur from wind pressure during high-speed riding, and the all-new double shield locking mechanism prevents potential unwanted shield openings in the event of an accident. VORTEX GENERATORS The CWR-F race shield also features SHOEI’s exclusive patent-pending Vortex Generators, which effectively reduce air friction and improve airflow around the helmet’s surface. CWR-F race shields provide a flat surface to accommodate racing tearoffs, and the newly designed tearoff posts allow for tension to be adjusted without tools for a quick and easy installation. Coupled with the CWR-F race shield, the X-Fourteen’s innovative QR-E base EASY-ADJUSTMENT plate system facilitates quicker shield changes than ever before. TEAR-OFF POSTS

EXPANDED X-FOURTEEN VISION RANGE X-TWELVE VISION RANGE

4º

HIGHLY ADJ USTABLE INTER IO R The X-Fourteen is equipped with a fully removable, washable, replaceable, and adjustable 3D Max-Dry Custom Interior System. SHOEI’s exclusive Max-Dry liner material absorbs and dissipates sweat and moisture twice as fast as traditional nylon interiors, and in combination with the X-Fourteen’s superior ventilation system, keeps racers and aggressive riders alike cool and dry during intense riding sessions. The 3D center pad components are three-dimensionally shaped to match the contours of a rider’s head, allowing for an extremely comfortable fit while maintaining the firm hold necessary for distraction-free, highspeed racing. Additionally, the X-Fourteen’s 3D Max-Dry Custom Interior System allows riders the opportunity to replace each section of the center pad with optional thicknesses for a completely customizable fit. The star of the X-Fourteen’s 3D Max-Dry Custom Interior System is the all-new, patent pending rotating liner components, which allow riders to adjust the position/angle of the helmet by up to four degrees (see image above) to increase the upper field of vision while tucked in extreme racing positions. The SHOEI X-Fourteen also includes ear pads, a removable breath guard, and chin curtain to complete the comfort package.

DUA L-LAY E R /M ULT I - D EN S ITY E P S L IN ER The X-Fourteen’s Dual-Layer, Multi-Density EPS liner provides enhanced impact absorption by utilizing varying densities of foam in key areas around the rider’s head; it is also designed to allow cooling air to travel unrestricted through tunnels created in the EPS, further enhancing the X-Fourteen’s superior ventilation characteristics. In addition to enhanced impact absorption and ventilation, the precise placement of multi-density EPS liner material yields a more compact, lightweight design.

HELMET SIZE

XS-XXL

2XL

LINER

MASK LINER

SHELL

HELMET SIZE

SHELL SIZES

SM S

2XL

CENTER PAD

S13

XL9

XL5

CHEEK Standard PADS Optional

39mm

35mm

31mm

43/35/31

39/31

39/35

WHEN MILLISECONDS COUNT

FU L L - F A CE H ELMET FEATURES Aerodynamic Shell Design • Aerodynamic properties are maximized through extensive wind tunnel testing and professional riders’ feedback • Dual-Layer Multi-Density EPS liner enhances impact absorption and ventilation • Four shell and five EPS liner sizes present increased fit options that help to comfortably fit most head sizes • Impact absorbing EPS liner throughout the entire chin bar with Cheek Pad Cooling System • Standard Rear Flaps can be replaced with optional, narrower flaps to customize aerodynamics, depending on rider preference and track demands • Removable Lower Air Spoiler can be affixed to the chin bar to improve aerodynamic stablization Ventilation System • Upper air intake vent is positioned to maximize air volume into the helmet interior • Top outlet vent is separate from the Rear Stabilizer, allowing it to be positioned for optimum flow-through ventilation • Cheek Pad Cooling System features channels cut through the EPS liner and corresponding air holes in the cheek pad foam, cooling and clearing warm, humid air away from the rider’s face • Breath guard and chin curtain included Lightweight, Advanced Integrated Matrix Plus (AIM+) • High performance fiber materials are combined with extremely elastic organic fibers into shell construction for a structure that is ultra lightweight, rigid, and resilient 3D Max-Dry Custom Interior System • The entire interior lining (cheek pads, upper liner, and chin strap covers) can be removed for cleaning, center and cheek pads can be replaced with optional thicknesses for a customizable fit • Cheek pads and center pad can be manipulated to allow riders to adjust the position/angle of the helmet by up to four degrees, increasing the upper field of vision while tucked in extreme racing positions • Comfortable, 3D Max-Dry helmet liner material absorbs and dissipates sweat and moisture twice as fast as traditional nylon interiors, keeping aggressive riders cool and dry • E.Q.R.S. (Emergency Quick Release System) allows emergency medical personnel to easily remove the cheek pads from an injured rider’s helmet, enabling the helmet to be more easily removed from the head • Extra comfort provided by, removable ear pads, breath guard, and chin curtain Standard Chin-Strap Snap • Neatly secures chin strap CWR-F Shield and QR-E System • QR-E base plate system allows for tool-less shield removal and installation • Exclusive patent pending Vortex Generators on shield reduce air friction • Scratch-resistant coating and Pinlock® EVO Fog Resistant System • 99% protection from harmful UV A & B rays • All-new double shield locking mechanism prevents unwanted shield openings Available Only to Authorized Shoei Elite Dealers TECHNICAL INFORMATION Standards: Snell 2015 and DOT-218 Approved Construction: AIM+ (Advanced Integrated Matrix Plus Multi Fiber) Weight: 3.6 lbs/1634 grams (approx, based on Size Medium Solid Color) Packaging: Individually wrapped, bagged and boxed, six per master carton Please Note: Replacement parts for these helmets may be found on pages 64-70.

WHITE

SOLIDS MSRP

$731.99

MATTE MSRP

$742.99

Includes Fog Resistant System REAR VIEW

SOLIDS & MATTE Sizes XS S M L XL 2XL

Black

White

Matte Black

0104-0105-03 0104-0109-03 0104-0135-03 0104-0105-04 0104-0109-04 0104-0135-04 0104-0105-05 0104-0109-05 0104-0135-05 0104-0105-06 0104-0109-06 0104-0135-06 0104-0105-07 0104-0109-07 0104-0135-07 0104-0105-08 0104-0109-08 0104-0135-08 SHOEI SHELF TALKER X-FOURTEEN Part# 02-850

BLACK

MATTE BLACK

REPLACEMENT SHIELDS & LENSES CWR-F Pinlock® EVO Lens Clear 0209-9300-00 CWR-F Shield Clear w/Tearoff Posts 0209-9500-00 CWR-F Shield Hi Viz Yellow w/Tearoff Posts 0209-9503-00 CWR-F Shield Dk Smoke w/Tearoff Posts 0209-9505-00

REPLACEABLE REAR FLAPS Standard Narrow

0204-2907-00 0204-2807-00

WHEN MILLISECONDS COUNT

BRINK TC-2

BRINK TC-1

BRINK TC-5

BRINK TC-10

BRINK

MSRP

$859.99

REAR VIEW

TOP VIEW

Sizes

TC-1

TC-2

TC-5

TC-10

XS S M L XL 2XL

0104-1901-03 0104-1901-04 0104-1901-05 0104-1901-06 0104-1901-07 0104-1901-08

0104-1902-03 0104-1902-04 0104-1902-05 0104-1902-06 0104-1902-07 0104-1902-08

0104-1905-03 0104-1905-04 0104-1905-05 0104-1905-06 0104-1905-07 0104-1905-08

0104-1910-03 0104-1910-04 0104-1910-05 0104-1910-06 0104-1910-07 0104-1910-08

Includes Pinlock® Shield & Lens Fog Resistant System

REAR VIEW

MARQUEZ MOTEGI 2

MARQUEZ MOTEGI 2 TC-1

MSRP

$889.99 TOP VIEW

Sizes

TC-1

XS S M L XL 2XL

0104-1801-03 0104-1801-04 0104-1801-05 0104-1801-06 0104-1801-07 0104-1801-08

WHEN MILLISECONDS COUNT

REAR VIEW

LAWSON Sizes

TOP VIEW

S M L XL

LAWSON TC-1

TC-1 0104-1501-04 0104-1501-05 0104-1501-06 0104-1501-07

MSRP

$849.99

REAR VIEW

RAINEY Sizes

TOP VIEW

L XL

RAINEY TC-1

TC-1 0104-1401-06 0104-1401-07

MSRP

$849.99

KAGAYAMA5 TC-5 (Matte)

REAR VIEW

KAGAYAMA5

KAGAYAMA5 TC-2 MSRP

$889.99

toll free / 1-800-421-7247 online / www.helmethouse.com

TOP VIEW

Sizes

TC-2

TC-5

XS S M L XL 2XL

0104-1702-03 0104-1702-04 0104-1702-05 0104-1702-06 0104-1702-07 0104-1702-08

0104-1705-03 0104-1705-04 0104-1705-05 0104-1705-06 0104-1705-07 0104-1705-08

Please Note: Replacement parts for these helmets may be found on pages 64-70.

WHEN MILLISECONDS COUNT

MARQUEZ4 TC-6

REAR VIEW

MARQUEZ4

MARQUEZ4 TC-1 MSRP

$889.99

Sizes

TC-1

TC-6

XS S M L XL 2XL

0104-1201-03 0104-1201-04 0104-1201-05 0104-1201-06 0104-1201-07 0104-1201-08

0104-1206-03 0104-1206-04 0104-1206-05 0104-1206-06 0104-1206-07 0104-1206-08

TOP VIEW

REAR VIEW

BRADLEY3

TOP VIEW

BRADLEY3 TC-1 MSRP

Sizes

TC-1

S M L XL 2XL

0104-1301-04 0104-1301-05 0104-1301-06 0104-1301-07 0104-1301-08

$889.99

REAR VIEW

LAVERTY TOP VIEW

LAVERTY TC-4 MSRP

$889.99

Sizes

TC-4

XS S M L XL 2XL

0104-1604-03 0104-1604-04 0104-1604-05 0104-1604-06 0104-1604-07 0104-1604-08

toll free / 1-800-421-7247 online / www.helmethouse.com

Form & Function Redefined In the pursuit of excellence in motorcycle helmet creation, SHOEI continues to strive to develop the most stylish, versatile, and technicallyadvanced protective head gear that riders have come to expect. Taking into account that comfort and convenience are key to a quality riding experience, SHOEI presents the GT-Air, a lightweight full-face helmet with improved ventilation, a fully removable noise-reducing interior, a built-in internal sun shield, and a distinctively stylish shell that is as good looking as it is integral to its performance while on the road.

SHELL DESIGN Incorporating a built-in, retractable sun shield presents the challenge of retaining a compact size to the helmet. In the case of the GT-Air, the visor’s compartment actually contributes to the aggressively sporty look by shaping contours around it that extend into a rear spoiler. These work together to stabilize the helmet at high speeds.

CNS-1 SHIELD & QSV-1 SUN SHIELD CNS-1 Shield

SHOEI’s CNS-1 shield is the result of years of injection-molded face shield development, the aim being to improve vision by diminishing distortion, as well as reduce constant wind noise. The QR-N shield base helps keep the shield tightly sealed to the helmet’s Dual Ridge Window Bead, as well as allowing for easy removal and replacement.

QR-N Shield Base

The GT-Air includes a built-in sun shield, the QSV-1. The sun shield tucks neatly away beneath a non-intrusive shell built into the helmet’s liner and can be lowered with the easy control of a sliding switch. QSV-1 Internal Sun Shield ©2018 Helmet House, Inc

PINLOCK® FOG RESISTANT SYSTEM The CNS-1 shield includes built-in pins for a Pinlock® EVO fog resistant lens; which transforms a single shield into a dual shield that resists fog buildup. The lens has been designed to cover a larger area on the shield, increasing peripheral vision in the event of fog buildup.

Lens Included

SHELL AND INTERIOR FIT The interior of the GT-Air has been designed for fine adjustment and easy maintenance. The top center pad is removable, in turn making it easier to remove all other interior parts. A variety of fabrics in the 3D Max-Dry interior are utilized to maximize comfort and perspiration absorption. A firm, even fit is accomplished with the help of polyurethane foam layers of varying density. Fit is further optimized through a choice of three shell sizes. Improved design in the shape of cheek pads allows for better fit around the earpieces of eyeglasses, while reducing gaps in order to reduce invasive exterior noise and improve fit. AIM (Advanced Integrated Matrix) is SHOEI’s own lightweight, rigid, and elastic shell structure, combining layers of strong fiberglass with organic fibers. A balanced combination of both rigid and pliant layers provides superior safety performance and fulfills strict standards expected of protective motorcycle headwear.

SHELL SIZES

HELMET SIZE

SHELL

XS-XXL

LINER

2XL

HELMET SIZE

2XL

CHEEK Standard PADS Optional

39mm

35mm

31mm

43/35/31

39/31

39/35

NOTE: Optional 43mm cheek pad available

Borrowing technology developed for SHOEI’s racing helmets, the GT-Air is equipped with the exclusive EQRS (Emergency Quick Release System) that allows emergency medical personnel to easily remove the cheek pads from an injured rider’s helmet. With the cheek pads removed, the helmet may be safely and easily lifted from the rider’s head by emergency personnel. ©2018 Helmet House, Inc

FORM AND FUNCTION REDEFINED

FU L L -FA CE H ELMET FEATURES Aerodynamic Shell Design • Aerodynamic properties are maximized through extensive wind tunnel testing and professional riders’ feedback • Multi-Piece EPS liner enhances impact absorption and ventilation • Three shell and four EPS liner sizes provide increased fit options that help to comfortably fit most head sizes • Molded air spoiler reduces drag and lift, as well as diminishes pressure on the rider’s neck while riding at high speed Sun Shield System • Built-in QSV-1 sun shield gives riders instant relief from sun glare in one quick motion • Sun shield meets ANSI Z80.3-2010 standard for non-prescription eyeglasses SILVER • Large and easy to reach switch activates the 3D injection-molded inner sun shield • Distortion-free shield blocks 99% of harmful UV rays • Forehead area of the outer shell is raised slightly to accommodate the internal sun shield, helping allow SOLIDS MSRP SOLIDS for the integrity of the helmet’s inner EPS liner $549.99 to remain intact Sizes Black White REAR Ventilation System MATTE & VIEW XS 0118-0105-03 0118-0109-03 METALLICS MSRP • Upper Air Intake Vent is positioned to maximize air S 0118-0105-04 0118-0109-04 volume into the helmet interior $579.99 M 0118-0105-05 0118-0109-05 • Large upper intake vent positioned to maximize performance behind wind screens L 0118-0105-06 0118-0109-06 • Easy to operate large lower intake vent XL 0118-0105-07 0118-0109-07 • Lower air intake/defroster vent reduces shield 2XL 0118-0105-08 0118-0109-08 fogging and increases ventilation • The rear/neck vents allow for effective air exhaust METALLICS & MATTE • Breath guard and chin curtain included Sizes Silver Anthracite Brilliant Yellow Shine Red Matte Black Advanced Integrated Matrix (AIM) • High performance fiberglass and organic fibers are XS 0118-0107-03 0118-0117-03 0118-0123-03 0118-0131-03 0118-0135-03 combined to create a shell structure that is S 0118-0107-04 0118-0117-04 0118-0123-04 0118-0131-04 0118-0135-04 ultra-lightweight, rigid, and resilient M 0118-0107-05 0118-0117-05 0118-0123-05 0118-0131-05 0118-0135-05 Interior System L 0118-0107-06 0118-0117-06 0118-0123-06 0118-0131-06 0118-0135-06 • 3-D Max-Dry center pad and multi-layered, polyurethane XL 0118-0107-07 0118-0117-07 0118-0123-07 0118-0131-07 0118-0135-07 foam cheek pads 2XL 0118-0107-08 0118-0117-08 0118-0123-08 0118-0131-08 0118-0135-08 • Chin curtain prevents wind entry and reduces noise • Cheek pads are replaceable or removable Includes Pinlock® for maintenance SHOEI SHELF TALKER Shield & Lens • Eyeglass compatible interior GT-AIR Part# 02-845 • E.Q.R.S. (Emergency Quick-Release System) allows emergency medical personnel to easily remove the cheek pads from the helmet of a rider involved in an accident, in turn making the helmet more easily removable Standard Chin Strap Snap • Neatly secures chin strap CNS-1 Shield System • The CNS-1, three-dimensionally curved shield is both wider and taller than the CX-1V it replaces • Includes new redesigned Pinlock® EVO Fog BLACK WHITE MATTE ANTHRACITE BRILLIANT SHINE Resistant Lens for more coverage of the BLACK YELLOW CNS-1 shield RED • Dual-Ridge window bead increases contact with the shield to reduce wind noise REPLACEMENT SHIELDS & LENSES • Scratch resistant shield coating QSV-1 Sun Visor Smoke 0217-9005-00 • 99.9% protection from harmful UV A&B rays CNS-1 Shield Clear w/Pinlock® Pins 0217-9100-00 CWR-1, CW-1, CNS-1 Pinlock EVO® Lens Clear 0209-9800-00 TECHNICAL INFORMATION Standards: Construction: Weight: Packaging:

DOT-218 AIM (Advanced Integrated Matrix) Shell 3.62 lbs /1640 grams (approx, based on Size Medium Solid Color) Individually wrapped, bagged and boxed, 6 per master carton

toll free / 1-800-421-7247 online / www.helmethouse.com

FORM AND FUNCTION REDEFINED

SWAYER TC-1 (Matte)

SWAYER TC-3 (Matte)

SWAYER TC-5 (Matte)

Sizes XS S M L XL 2XL

SWAYER TC-2 MSRP

$670.99

TC-1 0118-2101-03 0118-2101-04 0118-2101-05 0118-2101-06 0118-2101-07 0118-2101-08

SWAYER

TC-2 0118-2102-03 0118-2102-04 0118-2102-05 0118-2102-06 0118-2102-07 0118-2102-08

TC-3 0118-2103-03 0118-2103-04 0118-2103-05 0118-2103-06 0118-2103-07 0118-2103-08

TC-5 0118-2105-03 0118-2105-04 0118-2105-05 0118-2105-06 0118-2105-07 0118-2105-08

Includes Pinlock® Shield & Lens REAR VIEW

TOP VIEW

Fog Resistant System

REAR VIEW ®

DECADE

Sizes XS S M L XL 2XL

DECADE TC-1 MSRP

TC-1 0118-1901-03 0118-1901-04 0118-1901-05 0118-1901-06 0118-1901-07 0118-1901-08

TOP VIEW

$670.99

FORM AND FUNCTION REDEFINED

DAUNTLESS TC-10

DAUNTLESS TC-11

Sizes XS S M L XL 2XL

DAUNTLESS TC-1

MSRP

$670.99

DAUNTLESS

TC-1 0118-1801-03 0118-1801-04 0118-1801-05 0118-1801-06 0118-1801-07 0118-1801-08

TC-10 0118-1810-03 0118-1810-04 0118-1810-05 0118-1810-06 0118-1810-07 0118-1810-08

TC-11 0118-1811-03 0118-1811-04 0118-1811-05 0118-1811-06 0118-1811-07 0118-1811-08

REAR VIEW

Includes Pinlock® Shield & Lens

EXPANSE TC-1

EXPANSE TC-4

EXPANSE TC-6

Sizes XS S M L XL 2XL

EXPANSE TC-10 MSRP

$670.99

REAR VIEW

TC-1 — 0118-1701-04 0118-1701-05 0118-1701-06 0118-1701-07 0118-1701-08

EXPANSE

TC-4 0118-1704-03 0118-1704-04 0118-1704-05 0118-1704-06 0118-1704-07 0118-1704-08

TC-6 0118-1706-03 0118-1706-04 0118-1706-05 0118-1706-06 0118-1706-07 0118-1706-08

TC-10 0118-1710-03 0118-1710-04 0118-1710-05 0118-1710-06 0118-1710-07 0118-1710-08

toll free / 1-800-421-7247 online / www.helmethouse.com

FORM AND FUNCTION REDEFINED

TOP VIEW PENDULUM TC-1 (Matte) MSRP

$670.99

REAR VIEW

PENDULUM TC-3 (Matte)

PENDULUM TC-5 (Matte)

PENDULUM TC-6

PENDULUM TC-10 (Matte)

Sizes XS S M L XL 2XL

Includes Pinlock® Shield & Lens Fog Resistant System

TC-1 0118-2001-03 0118-2001-04 0118-2001-05 0118-2001-06 0118-2001-07 0118-2001-08

PENDULUM

TC-3 0118-2003-03 0118-2003-04 0118-2003-05 0118-2003-06 0118-2003-07 0118-2003-08

TC-5 0118-2005-03 0118-2005-04 0118-2005-05 0118-2005-06 0118-2005-07 0118-2005-08

TC-6 0118-2006-03 0118-2006-04 0118-2006-05 0118-2006-06 0118-2006-07 0118-2006-08

TC-10 0118-2010-03 0118-2010-04 0118-2010-05 0118-2010-06 0118-2010-07 0118-2010-08

toll free / 1-800-421-7247 online / www.helmethouse.com

The Ev ol u t i on o f Per fecti o n Since its introduction with the RF-102, SHOEI’s RF series has evolved through significant changes as a leading sport model helmet. Years of development, wind tunnel testing, and on-track rider feedback have contributed greatly to this model’s growth. It is with great pride and confidence that we present the SHOEI RF-1200®.

Slim & Light One of the most important features of a quality helmet is that you hardly know it’s there protecting your head. SHOEI has reduced the weight of the RF-1200® by using a slimmer design and building a distinct line into the side of the helmet that also serves as an accent. As a result, the SHOEI RF-1200® is lighter than any other Snell certified helmet in the current SHOEI lineup.

Shell Construction The slim design of the SHOEI RF-1200®, with its distinct accent cut line, widens the bottom of the helmet to help ease the process of putting the helmet on or off. Further advancing the comfort of the AIM+ shell is the industry leading four shell sizes that the SHOEI RF-1200® comes in. Extensive wind tunnel testing helps SHOEI realize a practical aerodynamic shape that limits the lift and shake that high speeds commonly create while riding. The slim, aerodynamic design developed through wind tunnel testing lessens the load on the rider’s neck and creates a more comfortable riding experience.

HELMET SIZE

SHELL

XS SM

XL XL

XXL

LINER

The impact-absorbing Dual-Layer/Multi-Density EPS liner consists of two layers incorporating different densities, providing enhanced impact absorption while allowing cooling air to travel unrestricted through tunnels in the EPS. ©2018 Helmet House, Inc

FULL-FACE HELMET Quietness The SHOEI RF-1200® has achieved a new level in the reduction of wind noise. Through advancements in the aerodynamic shape, improved interior liners, and an improved shield system, the rider will enjoy a very quiet and comfortable riding experience. The 3D-shaped interior of the RF-1200® has achieved a balance of a comfortably soft fit and a firm, stable hold. The removable cheek pads utilize soft polyurethane foam, covering six layers of hard polyurethane to reduce shaking. The bottom of the cheek pads feature a high volume design, filling in the distinct and aggressive accent line of the shell of the helmet, comfortably forming to the riders neck and blocking wind from entering the helmet. The multi-layer cheek pads also improve the range of motion in the neck, thus helping the rider to check traffic behind him or her.

SHELL SIZES XS-XXL

HELMET SIZE

XXL

CHEEK Standard PAD Optional

39mm

35mm

31mm

ALL CHEEK PAD SIZES INTERCHANGEABLE IN ALL HELMET SIZES

NOTE: Optional 43mm cheek pad available

Shield System The RF-1200® features a shield system that continues to offer the rider the best in optical performance. The CWR-1 Pinlock® shield features ribs on the top and bottom of the shield to improve rigidity and eliminate bending of the shield caused by wind pressure or the opening and closing of the shield. Independent beading on the top and sides of the helmet help to keep the seal of the shield tight and eliminate any excess air. In addition to the CWR-1 shield, SHOEI has developed an updated base plate for the RF-1200®. The QR-E base plate is spring-loaded and pulls the shield back onto the helmet’s window beading, sealing it tightly with strengthened springs to guard against wind and rain. The addition of a new fivestage rotating dial allows for fine tuning of the base plate for easy shield sealing adjustments.

Ventilation Rigorous wind tunnel testing and development has resulted in the improved ventilation of the RF-1200®. A large lower three position vent, three upper air intake vents, and four uniquely positioned upper exhaust outlet vents combine with the Dual-Layer/Multi-Density EPS liner to allow cooling air to travel unrestricted through tunnels created in the EPS liner, while also allowing for a more compact, lightweight design. ©2018 Helmet House, Inc

THE EVOLUTION OF PERFECTION

FU L L -FACE H ELMET

FEATURES Light Weight Multi-Ply Matrix AIM+ Shell Construction • Smaller, lighter yet stronger shell design; compact and aerodynamic, with attention towards wind noise reduction without blocking road noises • Four shell sizes ensure a custom fit • Dual density EPS liner accommodates a more compact design without compromising ventilation flow Ventilation System • Superior ventilation as a result of rigorous wind tunnel testing • Large three-position lower vent, three upper vent intakes, and four uniquely positioned upper exhaust outlet vents 3D Max-Dry System II Interior • Center pad components are three-dimensionally shaped to match contours of the rider’s head, allowing comfortable fit while maintaining a firm hold for high-speed riding • 3D shaped cheek pads available in multiple thicknesses for a custom fit • Max-Dry System II liner material quickly absorbs and dissipates sweat and moisture • E.Q.R.S. (Emergency Quick-Release System) allows emergency medical personnel to easily remove cheek pads from an injured rider’s helmet • Chin curtain and breath guard included

TECHNICAL INFORMATION Standards: Snell M2015 and DOT-218 Approved Construction: AIM+ (Advanced Integrated Matrix Plus Multi-Ply) Weight: 3.46 lbs / 1570 grams (approx, based on size Medium Solid Color) Packaging: Individually wrapped, bagged and boxed, six per master carton

SOLIDS MSRP

$485.99 MATTES & METALLICS MSRP

LIGHT SILVER

$498.99

CWR-1 Shield System • Shield features ribs along the top and bottom to improve rigidity and eliminate bending from wind pressure during opening and closing • Improved window beading features dual-layered dual lip construction that ensures a windproof and waterproof seal with every closure • Locking mechanism easily engages the shield lock when fully closed • Pinlock® pins and EVO fog resistant lens insert included QR-E Base Plate System • Facilitates quick and smooth shield changes • SHOEI’s patented spring-loaded technology ensures a wind and waterproof seal • Strengthened springs for more precise functionality • All-new five-stage rotating dial for shield/base plate fine-tuning Standard Chin Strap Snap • Neatly secures chin strap

Includes Pinlock® Shield & Lens

toll free / 1-800-421-7247 online / www.helmethouse.com

THE EVOLUTION OF PERFECTION

BLACK

WINE RED

WHITE

BLACK METALLIC

ANTHRACITE METALLIC

SHINE RED

BRILLIANT YELLOW

MATTE BLACK

MATTE DEEP GREY

F UL L -FACE HEL MET SOLIDS

MATTES & METALLICS

Sizes

Black

White

Light Silver

XS S M L XL 2XL

0109-0105-03 0109-0105-04 0109-0105-05 0109-0105-06 0109-0105-07 0109-0105-08

0109-0109-03 0109-0109-04 0109-0109-05 0109-0109-06 0109-0109-07 0109-0109-08

0109-0107-03 0109-0107-04 0109-0107-05 0109-0107-06 0109-0107-07 0109-0107-08

Wine Red

Black Metallic

Anthracite Metallic

Brilliant Yellow

Shine Red

Matte Black

Matte Deep Grey

0109-0111-03 0109-0111-04 0109-0111-05 0109-0111-06 0109-0111-07 0109-0111-08

0109-0115-03 0109-0115-04 0109-0115-05 0109-0115-06 0109-0115-07 0109-0115-08

0109-0117-03 0109-0117-04 0109-0117-05 0109-0117-06 0109-0117-07 0109-0117-08

0109-0123-03 0109-0123-04 0109-0123-05 0109-0123-06 0109-0123-07 0109-0123-08

0109-0131-03 0109-0131-04 0109-0131-05 0109-0131-06 0109-0131-07 0109-0131-08

0109-0135-03 0109-0135-04 0109-0135-05 0109-0135-06 0109-0135-07 0109-0135-08

0109-0137-03 0109-0137-04 0109-0137-05 0109-0137-06 0109-0137-07 0109-0137-08

REPLACEMENT SHIELDS & LENSES CWR-1 Shield Clear w/Pinlock® Pins CWR-1 Shield Hi-Def Yellow w/Pinlock® Pins CWR-1 Shield Dk. Smoke w/Pinlock® Pins CWR-1 Shield Hi-Def Orange w/Pinlock® Pins CWR-1 Shield Lt. Smoke w/Pinlock® Pins CWR-1 Shield Mellow Smoke w/Pinlock® Pins CWR-1, CW-1, CNS-1 Pinlock EVO® Lens Clear CWR-1 Spectra Blue w/Pinlock® Pins CWR-1 Spectra Chrome w/Pinlock® Pins CWR-1 Spectra Gold w/Pinlock® Pins CWR-1 Shield Photochromic

0209-9400-00 0209-9403-00 0209-9405-00 0209-9406-00 0209-9415-00 0209-9425-00 0209-9800-00 0209-9402-00 0209-9407-00 0209-9413-00 0209-9755-00

SHOEI SHELF TALKER RF-1200® Part# 02-852

toll free / 1-800-421-7247 online / www.helmethouse.com

THE EVOLUTION OF PERFECTION

FLAGGER TC-2 (Matte)

FLAGGER TC-3 (Matte)

FLAGGER TC-4 (Matte)

FLAGGER TC-5 (Matte)

FLAGGER TC-1 (Matte)

FLAGGER TC-6

TOP VIEW

MSRP

FLAGGER

$589.99

Includes Pinlock® Shield & Lens REAR VIEW

Sizes

TC-1

TC-2

TC-3

TC-4

TC-5

TC-6

XS S M L XL 2XL

0109-3101-03 0109-3101-04 0109-3101-05 0109-3101-06 0109-3101-07 0109-3101-08

0109-3102-03 0109-3102-04 0109-3102-05 0109-3102-06 0109-3102-07 0109-3102-08

0109-3103-03 0109-3103-04 0109-3103-05 0109-3103-06 0109-3103-07 0109-3103-08

0109-3104-03 0109-3104-04 0109-3104-05 0109-3104-06 0109-3104-07 0109-3104-08

0109-3105-03 0109-3105-04 0109-3105-05 0109-3105-06 0109-3105-07 0109-3105-08

0109-3106-03 0109-3106-04 0109-3106-05 0109-3106-06 0109-3106-07 0109-3106-08

PARAMETER TC-1 (Matte)

PARAMETER TC-3

PARAMETER TC-5 (Matte)

PARAMETER TC-8

PARAMETER TC-2 TOP VIEW MSRP

$589.99

REAR VIEW

PARAMETER

Sizes

TC-1

TC-2

TC-3

TC-5

TC-8

XS S M L XL 2XL

0109-3001-03 0109-3001-04 0109-3001-05 0109-3001-06 0109-3001-07 0109-3001-08

0109-3002-03 0109-3002-04 0109-3002-05 0109-3002-06 0109-3002-07 0109-3002-08

0109-3003-03 0109-3003-04 0109-3003-05 0109-3003-06 0109-3003-07 0109-3003-08

0109-3005-03 0109-3005-04 0109-3005-05 0109-3005-06 0109-3005-07 0109-3005-08

0109-3008-03 0109-3008-04 0109-3008-05 0109-3008-06 0109-3008-07 0109-3008-08

toll free / 1-800-421-7247 online / www.helmethouse.com

Please Note: Replacement parts for these helmets may be found on pages 64-70.

THE EVOLUTION OF PERFECTION

RUTS TC-5 (Matte) Left Side

REAR VIEW

RUTS TC-5 (Matte) Right Side

RUTS RUTS TC-6 (Matte) MSRP

$589.99

Sizes

TC-5

TC-6

XS S M L XL 2XL

0109-2805-03 0109-2805-04 0109-2805-05 0109-2805-06 0109-2805-07 0109-2805-08

0109-2806-03 0109-2806-04 0109-2806-05 0109-2806-06 0109-2806-07 0109-2806-08

TOP VIEW

INTENSE

REAR VIEW

INTENSE TC-7

Sizes

TC-7

XS S M L XL 2XL

0109-2907-03 0109-2907-04 0109-2907-05 0109-2907-06 0109-2907-07 0109-2907-08

TOP VIEW

MSRP

$589.99

RIGHT SIDE

REAR VIEW

MSRP

$626.99

LEFT SIDE

MARQUEZ POWER UP! TC-1

MARQUEZ POWER UP!

Includes Pinlock® Shield & Lens

toll free / 1-800-421-7247 online / www.helmethouse.com

TOP VIEW

Please Note: Replacement parts for these helmets may be found on pages 64-70.

Sizes

TC-1

XS S M L XL 2XL

0109-3201-03 0109-3201-04 0109-3201-05 0109-3201-06 0109-3201-07 0109-3201-08

THE EVOLUTION OF PERFECTION

INCISION TC-5 TOP VIEW

MSRP

$589.99

INCISION TC-1

REAR VIEW

INCISION TC-6

INCISION Sizes

TC-1

TC-5

TC-6

XS S M L XL 2XL

0109-3401-03 0109-3401-04 0109-3401-05 0109-3401-06 0109-3401-07 0109-3401-08

0109-3405-03 0109-3405-04 0109-3405-05 0109-3405-06 0109-3405-07 0109-3405-08

0109-3406-03 0109-3406-04 0109-3406-05 0109-3406-06 0109-3406-07 0109-3406-08

TROOPER TC-1 (Matte)

TOP VIEW

Includes Pinlock® Shield & Lens TROOPER TC-10 REAR VIEW

MSRP

TROOPER Sizes

TC-1

TC-10

XS S M L XL 2XL

0109-3501-03 0109-3501-04 0109-3501-05 0109-3501-06 0109-3501-07 0109-3501-08

0109-3510-03 0109-3510-04 0109-3510-05 0109-3510-06 0109-3510-07 0109-3510-08

$589.99

RECOUNTER TC-5 (Matte) TOP VIEW

RECOUNTER

RECOUNTER TC-10 MSRP

REAR VIEW

toll free / 1-800-421-7247 online / www.helmethouse.com

Sizes

TC-5

TC-10

XS S M L XL 2XL

0109-3305-03 0109-3305-04 0109-3305-05 0109-3305-06 0109-3305-07 0109-3305-08

0109-3310-03 0109-3310-04 0109-3310-05 0109-3310-06 0109-3310-07 0109-3310-08

Please Note: Replacement parts for these helmets may be found on pages 64-70.

THE LEGACY OF PERFECTION

FULL-FACE HELMET Aerodynamic Shell Design • Aerodynamic properties are maximized through extensive wind tunnel and professional riders’ feedback • Dual-Layer EPS liner enhances impact absorption and ventilation • A third generation Tail Fin, integrated into the bottom rear beading in combination with the Shell-Integrated Spoiler, allows smooth airflow that reduces drag and lift Variable Ventilation System • Upper air intake vent is positioned to maximize air volume into the helmet’s interior • Top outlet vent is separate from the ShellIntegrated Spoiler, allowing it to be positioned for optimum flow-through ventilation • Four rear outlet vents allow for adjustment of airflow based on riding position • Enlarged lower air intake/defroster vent reduces MATTE shield fogging and increases ventilation BLACK • The rear/neck outlets allow for effective air exhaust Lightweight Advanced Integrated Matrix Plus (AIM+) • High performance fiber materials are combined with extremely elastic organic fibers to create a shell structure that is ultra lightweight, rigid, and resilient Interior System • The entire interior lining (cheek pads, crown liner, and chin strap covers) is easily removed to allow cleaning • Each component of the inner liner is ergonomically designed to offer the ultimate in safety, fit, and comfort • Eyeglass compatible interior MATTE BLACK • Breath guard and chin curtain included MSRP • Optional ear pads and optional cheek pad sizes available $501.99 Standard Chin Strap Snap BLACK • Neatly secures chin strap MSRP CW-1 Shield and Q.R.S.A. System $477.99 • Q.R.S.A. base plate allows for tool-less shield removal and installation. The spring-loaded base plate (U.S. patent pending 11/799935) pulls the shield back to contact the window beading evenly and ensures Compatible with a proper seal • The CW-1, three-dimensionally curved Fog Resistant System shield is both wider and taller than the CX-1V it replaces BLACK • Optional, Pinlock®-ready CWF-1 two-dimensional racing shields with tear-off posts are available • Scratch-resistant coating ® • 99.9% protection from harmful UV A & B rays Sizes: Black Matte Black • Optional, CW-1 Pinlock® prepared shields are available to accommodate Pinlock EVO® 3XL 0113-0105-09 0113-0135-09 Fog Free Inserts • Optional tinted shields available REPLACEMENT SHIELDS & LENSES • A pre-set lever can easily lock the shield in place to prevent the shield from opening CW-1 Shield Hi-Def Yellow 0213-9103-00 unexpectedly, as well as prop the shield CW-1 Shield Hi-Def Orange 0213-9106-00 open to increase airflow CW-1 Shield Lt. Smoke 0213-9115-00 CW-1 Shield Mellow Smoke 0213-9125-00 TECHNICAL INFORMATION CW-1 Shield Half-Tint 0213-9150-00 Standards: Snell M2015, DOT-218 CW-1 Clear Shield w/Pinlock® Pins 0213-9400-00 Construction: AIM+ (Advanced Integrated CW-1 Shield Hi Def Yellow w/Pinlock® Pins 0213-9403-00 Matrix Plus Multi Fiber) CW-1 Shield Dk. Smoke w/Pinlock® Pins 0213-9405-00 Weight: 3.9 lbs / 1770 grams (approx) CW-1 Shield Lt. Smoke w/Pinlock® Pins 0213-9415-00 Packaging: Individually wrapped, bagged and CWF-1 Pinlock® Shield w/Tearoff Posts Clear 0213-9500-00 boxed, six per master carton CWF-1 Pinlock® Shield w/Tearoff Posts Hi Def Yellow 0213-9503-00 CWF-1 Pinlock® Shield w/Tearoff Posts Dk Smoke 0213-9505-00 CWR-1, CW-1, CNS-1 Pinlock EVO® Lens Clear 0209-9800-00

AVAILABLE IN 3XL SIZE ONLY

toll free / 1-800-421-7247

online / www.helmethouse.com Please Note: Replacement parts for these helmets may be found on pages 67 & 70.

STREAMLINED FUNCTION

TECHNOLOGY 1 DESIGN CONCEPT • Advanced, short-distance street performance and long-distance touring comfort • Compact, aerodynamic shell design with sharp and aggressive styling • Optimal shell aerodynamics and liner components reduce unwanted road noise • Matte black ventilation components enhance aggressive styling • Streamlined function and affordability

2 VENTILATION PERFORMANCE • Large lower vent shutter for ease of use with riding gloves • Two upper air vents for optimal air intake • Two uniquely positioned upper exhaust vents for improved negative pressure suction • Wind-tunnel optimized to balance enhanced airflow and silence

3 CWR-1 SHIELD

• Protects from 99% of the sun’s damaging UV rays • 3D injection molding ensures distortion-free view throughout the entire field of vision • Innovative ribs on top and bottom edge improve rigidity and eliminate bending • Advanced shield locking mechanism • Comes equipped with Pinlock® EVO fog-resistant system

4 QR-E BASE PLATE SYSTEM • Facilitates quick and smooth shield changes • SHOEI’s patented spring-loaded technology ensures a wind and waterproof shield • Strengthened springs for more precise functionality • Innovative five-stage rotating dial for shield/base plate fine-tuning

FULL-FACE HELMET

MULTI-PLY MATRIX AIM+ SHELL

EMERGENCY QUICK RELEASE SYSTEM (E.Q.R.S.)+

• Proprietary technology integrates a multi-ply matrix • Hand-laid interwoven layers of fiberglass with organic fibers and resin • SHOEI’s strongest, lightest and most elastic shell

• Allows emergency medical personnel to safely remove the cheek pads from an injured rider’s helmet • Helmet can be gently removed from an injured rider’s head with minimal load placed on his/her neck

DUAL-LAYER / MULTIDENSITY EPS LINER

INTERIOR COMFORT SYSTEM

• Provides enhanced impact absorption by utilizing varying densities of foam • Allows cooling air to travel unrestricted through tunnels created in the EPS • Precise placement of multi-density EPS material yields a more compact, lightweight design HELMET SIZE XS

XL XXL

SHELL

EPS LINER

MASK LINER

SM MD

XL LG

• Fully removable, washable, replaceable and adjustable • Three-dimensionally shaped to match the contours of a rider’s head • Multi-layer cheek pads available in multiple sizes for improved comfort and helmet stabilization

SHELL SIZES XS-XXL

HELMET SIZE

OPT

XXL

CENTER PAD

S17

S13

XL9

XL5

CHEEK PAD

43mm

39mm

35mm

31mm

STREAMLINED FUNCTION

FU L L -FA C E H ELMET

FEATURES Aerodynamic Shell Design • Aerodynamic properties are maximized through extensive wind tunnel testing and professional riders’ feedback • Dual-Layer Multi-Density EPS liner enhances impact absorption and ventilation WHITE • Four shell and EPS liner sizes present increased fit options that help to comfortably fit most MSRP head sizes $399.00 Ventilation System • Two upper air intake vents are positioned to REAR maximize air volume into the helmet interior; VIEW hot air is exhausted through top outlet for a more comfortable ride Includes • Lower intake vent absorbs air exhaled from the mouth to help eliminate shield fogging • Breath guard and chin curtain included Fog Resistant System Lightweight, Advanced Multi-Ply Matrix Plus (AIM+) CWR-1 Shield and QR-E System • High performance fiber materials are combined • CWR-1 shield features ribs along the top and bottom with extremely elastic organic fibers into shell to improve rigidity and eliminate bending from wind construction for a structure that is ultra lightweight, pressure during opening and closing rigid, and resilient • Improved window beading features dual-layered dual lip 3D Custom Interior System construction that ensures a windproof and waterproof • The entire interior lining (cheek pads, upper liner, seal with every closure and chin strap covers) can be removed for cleaning, • Locking mechanism easily engages the shield lock center and cheek pads can be replaced with optional when fully closed thicknesses for a customizable fit • Pinlock® pins and EVO fog resistant lens insert included • E.Q.R.S. (Emergency Quick Release System) allows • Spring-loaded base plates offer quick shield changes emergency medical personnel to easily remove the cheek pads from an injured rider’s helmet, enabling the • Five-stage rotating dial allows fine tuning of the base helmet to be more easily removed from the head plate for easy shield adjustments • Extra comfort provided by removable ear pads, breath • QR-E closure system allows for tool-less shield guard, and chin curtain removal and installation, and provides an air-tight seal intended to significantly minimize wind noise Standard Chin-Strap Snap • Neatly secures chin strap Available Only to Authorized Shoei Elite Dealers

TECHNICAL INFORMATION Standards: Snell 2015 and DOT-218 Approved Construction: AIM+ (Advanced Integrated Matrix Plus Multi Fiber) Weight: 3.49 lbs / 1593 grams (approx. for Size Medium Solid Color) Packaging: Individually wrapped, bagged and boxed, six per master carton

toll free / 1-800-421-7247 online / www.helmethouse.com

Please Note: Replacement parts for these helmets may be found on pages 64-70.

0209-9400-00 0209-9403-00 0209-9405-00 0209-9406-00 0209-9415-00 0209-9425-00 0209-9800-00 0209-9402-00 0209-9407-00 0209-9413-00 0209-9755-00

STREAMLINED FUNCTION

BLACK

TANGERINE ORANGE

MATTE BLUE METALLIC

MATTE BLACK

BASALT GREY

MATTE DEEP GREY

SOLIDS Sizes XS S M L XL 2XL

Sizes XS S M L XL 2XL

Tangerine Orange 0107-0116-03 0107-0116-04 0107-0116-05 0107-0116-06 0107-0116-07 0107-0116-08

Black 0107-0105-03 0107-0105-04 0107-0105-05 0107-0105-06 0107-0105-07 0107-0105-08

White 0107-0109-03 0107-0109-04 0107-0109-05 0107-0109-06 0107-0109-07 0107-0109-08

METALLICS & MATTES

Matte Blue Metallic 0107-0132-03 0107-0132-04 0107-0132-05 0107-0132-06 0107-0132-07 0107-0132-08

Matte Deep Grey 0107-0137-03 0107-0137-04 0107-0137-05 0107-0137-06 0107-0137-07 0107-0137-08

Matte Black 0107-0135-03 0107-0135-04 0107-0135-05 0107-0135-06 0107-0135-07 0107-0135-08

Basalt Grey 0107-0147-03 0107-0147-04 0107-0147-05 0107-0147-06 0107-0147-07 0107-0147-08

SHOEI SHELF TALKER RF-SR Part# 02-856

toll free / 1-800-421-7247 online / www.helmethouse.com Please Note: Replacement parts for these helmets may be found on pages 64-70.

Experience The Versatility

Design Concept When SHOEI first introduced the NEOTEC in 2011, riders worldwide realized not all modular helmets were created equal. With its lightweight, highly aerodynamic shell, advanced noise reduction, and optimal vision protection, all combined with an ease of use (critical to a modular helmet), SHOEI had indeed achieved new heights in head gear design. But that was just the beginning. Now, with the NEOTEC II, SHOEI has not only improved on already outstanding features, but also introduced design advances to bring their premiere modular design into a whole new era.

Ventilation Performance The NEOTEC II’s improved ventilation system has been wind-tunnel tested for cool air intake and hot air expulsion. Large upper and lower vent shutters offer greater ease of use with gloves. The expanded three-position upper air intake helps increase ventilation performance and adjustability. All-new exhaust outlets flank the upper air intake vents for improved hot air clearance.

Aerodynamics Helmet aerodynamics have been wind tunnel-tested, and optimized to accommodate varying riding positions. The NEOTEC II’s shell-integrated spoiler is now reshaped and repositioned to further reduce lift and drag. The helmet’s top air outlet also serves as a spoiler when riding in the upright position. Chin bar aerodynamics are improved by the newlydesigned “Aero Deflector”.

Micro Ratchet Chin Strap The Micro Ratchet Chin Strap is a 100% stainless steel interlocking mechanism which offers quick and smooth closure and opening, comfort, and is easily adjustable.

Noise Reduction The NEOTEC II’s enhanced shell shape has been designed to improve noise control. A new airtight window bead, along with the face cover’s “Vortex Generator” lip, help reduce noise and manage overall airflow. SHOEI also developed new “Noise Isolator” cheekpads that deflect wind, as well as reduce unwanted noise.

CNS-3 Shield System The newly-designed CNS-3 shield comes equipped with the Pinlock® EVO fog-resistant system, protects from 99% of the sun’s damaging UV rays, and provides improved air/water sealing and noise reduction. 3D injection molding ensures a distortion-free view throughout the entire field of vision. The incorporated base plate system facilitates smooth and easy shield changes. Includes Pinlock® Shield & Lens

Flip-Up Face Cover The NEOTEC II’s Flip-Up Face Cover is designed to convert instantly from a full-face to an open-face configuration with the simple push of a large lock release button located at the chin. The Face Cover holds firmly in the open position with the help of the all-new 360º Pivot Locking System, which assures a safe, secure closure when the cover is in the down, locked position. Lightweight Face Cover/face shield rotate with smooth precision on a variable eccentric axis, yielding the seamless versatility of a two-in-one design. 360º Pivot Locking System

QSV-1 Internal Sun Shield SHOEI’s NEOTEC II includes a built-in QSV-1 sun shield that offers instant relief from sun glare with the use of a large, easily located switch. The distortion-free view blocks 99% of the sun’s damaging UV rays, and exceeds ANSI Z80.3-2010 standards for non-prescription eyewear. The helmet’s outer shell forehead area is raised slightly to accommodate the internal sun shield. This allows the integrity of the helmet’s inner EPS liner to remain intact.

Multi-Piece EPS Liner The NEOTEC II’s EPS liner provides enhanced impact absorption by utilizing varying densities of foam. Cooling air is allowed to travel unrestricted through tunnels in the EPS. Precise placement of multi-density EPS material yields a more compact, lightweight design.

Interior Comfort System The removable interiors of the NEOTEC II are three-dimensionally shaped to match the contours of a rider’s head, with multi-layer cheek pads for improved comfort and helmet stabilization. All interiors are adjustable, washable, and replaceable. The “Noise Isolator” cheek pads have been developed to help deflect wind and reduce noise.

4DOT

SHELL SIZES S-XL

HELMET SIZE

SHELL

SM SM

EPS LINER

SIDE LINER

2XL XL XL

APPROVED

HELMET SIZE

2XL

CHEEK PAD SIZE

35mm

31mm

CTR PAD SIZE

XS9

XL9

XL5

Intercom-Ready Design The NEOTEC II has been designed to integrate seamlessly with the SENA® SRL Communication System, which in turn has been developed specifically for use with this helmet, and is sold exclusively by SENA. The system also allows riders to use their smart phones, for communication, navigation, and music listening while riding.

online / www.helmethouse.com

EXPERIENCE THE VERSATILITY

36 ®

M O D U LA R H ELMET

FEATURES Aerodynamic Shell Design • Aerodynamic properties are maximized through extensive wind tunnel testing • Multi-piece EPS liner enhances impact absorption and ventilation • Four shell sizes and five EPS liners present increased fit options that help to comfortably fit most head sizes from XS through XXL • SHOEI’s exclusive, state-of-the-art shell forming technology incorporates the aerodynamic advantages of a spoiler right into the shell of the NEOTEC® II Flip-Up Face Cover and Face Shield • SHOEI’s proven 360º Pivot Locking System, made of high quality stainlees steel components, ensures a safe and secure closure • Enlarged single-button release for chin bar and shield allows ease of use with riding gloves • Opening the face cover up will automatically close the face shield Sun Shield Visor System • Built-in QSV-1 sun shield gives riders instant relief from sun glare in one quick motion • Visor meets ANSI Z80.3-2010 standard for non-prescription eyeglasses • Large and easy to reach slide switch activates the 3D injection-molded inner sun shield • Distortion-free shield blocks 99% of harmful UV rays • Forehead area of the outer shell is raised slightly to accommodate the internal sun shield. This allows the integrity of the helmet’s inner EPS liner to remain intact Ventilation System • SHOEI’s wind tunnels helped to reveal the optimal balance between airflow and silence • Large lower vent shutter for ease of use with riding gloves optimizes air flow while in the riding position • All-new exhaust outlets flank adjustable upper air intake for improved hot-air expulsion Micro Ratchet Chin Strap • Patent-pending 100% stainless steel interlocking mechanism • Quick and smooth closure and release • Comfortable and easily adjustable Noise Reduction • All-new “Noise Isolator” cheek pads deflect wind and reduce unwanted noise • New airtight window bead and the face cover’s “Vortex Generator” lip reduce noise and manage airflow around the helmet • Enhanced shell shape improves noise control and aerodynamics SHOEI REPLACEMENT SHIELD CNS-3 Pinlock Shield Clear Part# 0216-9100-00

WHITE

AVAILABLE SPRING 2018

MSRP

$699.00

REAR VIEW 3D Interior Liner System • The entire interior liner (cheek pads, center pads, and chin strap covers) is easily removed for cleaning or replacement • Each component of the inner liner is ergonomically designed to offer the ultimate in safety, fit, and comfort • Comfortable, 3D helmet liner material quickly dissipates moisture • Eyeglass compatible interior is optimized for many different sizes of eyeglasses, while still minimizing gaps that can cause excess interior noise CNS-3 Shield and Base Plate System • All-new design provides approved air/water sealing and noise reduction • Protects from 99% of the sun’s damaging UV rays • 3D injection-molding ensures distortion-free view throughout the entire field of vision • CNS-3 base plate system facilitates smooth and easy shield changes and a wind and waterproof seal • New airtight window beading drains and prevents water from entering the helmet • Comes equipped with a Pinlock® EVO fog-resistant system • New shell design improves noise control and aerodynamics Standards: Construction: Weight: Packaging:

TECHNICAL INFORMATION DOT-218 AIM (Advanced Integrated Matrix) materials 3.92 lbs / 1780 grams (approx. for Size Medium Solid Color) Individually wrapped, bagged and boxed, six per master carton

Includes Pinlock® Shield & Lens

SHOEI SHELF TALKER NEOTEC II Part# 02-847 Please Note: Replacement parts for these helmets may be found on pages 64-70.

EXPERIENCE THE VERSATILITY

LIGHT SILVER

BLACK

ANTHRACITE METALLIC

WINE RED

MATTE BLUE METALLIC

MATTE DEEP GREY

MATTE BLACK ®

SOLIDS Sizes XS S M L XL 2XL

Black 0116-0105-03 0116-0105-04 0116-0105-05 0116-0105-06 0116-0105-07 0116-0105-08

White 0116-0109-03 0116-0109-04 0116-0109-05 0116-0109-06 0116-0109-07 0116-0109-08

METALLICS & MATTES Sizes XS S M L XL 2XL

Light Silver 0116-0107-03 0116-0107-04 0116-0107-05 0116-0107-06 0116-0107-07 0116-0107-08

Wine Red 0116-0111-03 0116-0111-04 0116-0111-05 0116-0111-06 0116-0111-07 0116-0111-08

Anthracite Metallic 0116-0117-03 0116-0117-04 0116-0117-05 0116-0117-06 0116-0117-07 0116-0117-08

Matte Blue Metallic 0116-0132-03 0116-0132-04 0116-0132-05 0116-0132-06 0116-0132-07 0116-0132-08

Matte Black 0116-0135-03 0116-0135-04 0116-0135-05 0116-0135-06 0116-0135-07 0116-0135-08

EXCURSION TC-3

Matte Deep Grey 0116-0137-03 0116-0137-04 0116-0137-05 0116-0137-06 0116-0137-07 0116-0137-08

EXCURSION TC-5 (MATTE)

EXCURSION TC-6

MSRP

$799.00

AVAILABLE SPRING 2018

Sizes XS S M L XL 2XL

EXCURSION

TC-3 0116-1003-03 0116-1003-04 0116-1003-05 0116-1003-06 0116-1003-07 0116-1003-08

TC-5 0116-1005-03 0116-1005-04 0116-1005-05 0116-1005-06 0116-1005-07 0116-1005-08

TC-6 0116-1006-03 0116-1006-04 0116-1006-05 0116-1006-06 0116-1006-07 0116-1006-08

REAR VIEW

toll free / 1-800-421-7247 EXCURSION TC-6 RIGHT SIDE

Includes Pinlock Shield & Lens

Please Note: Replacement parts for these helmets may be found on pages 64-70.

SRL (SHOEI RIDER LINK) COMMUNICATION SYSTEM

AMP UP YOUR RIDE WITH CUSTOM COMMUNICATION RECOMMENDED BY SHOEI EXCLUSIVELY FOR THE NEOTEC II CREATED EXCLUSIVELY TO INTEGRATE WITH THE SHOEI NEOTEC II Optimal Integration Designed jointly by Sena and SHOEI, the SHOEI Rider Link (SRL) is a sleek and low profile communication system tailored specifically to the SHOEI NEOTEC II, the upgraded version of the wildly popular NEOTEC modular helmet. The SRL is virtually undetectable from the outside of the helmet, and functions with a simple 3-button control, or via a Sena smartphone app.

COMMUNICATION IS OUR GAME Connectivity Simplified A dual Bluetooth chip allows for up to 8 intercom connections as well as simultaneously listen to music and talking to other riders via Intercom using Audio Multitasking. When audio comes through the Intercom, music will automatically decrease in volume, and return to a normal volume when riders stop talking over the Intercom. Simply pair the SRL with your smartphone to stream music, listen to GPS directions, and take and make phone calls. THE SRL DOES IT ALL A Feature Set to Keep You Moving In the Right Direction Take your ride up a notch with the stellar feature set of the SRL. In addition to the Universal and Group Intercom features, the SRL offers music sharing and Sena’s Advanced Noise Control technology. Smart volume regulates the volume of your music when the environment outside of your helmet changes due to wind noise or increased speed. Built in FM radio lets riders easily scan through and save up to ten radio stations. VERSATILE CONNECTIVITY MAKES FOR VERSATILE CAPABILITIES Stay Connected and In Control With the Sena Smartphone App Linking the SRL with the Sena Smartphone App (for iPhone and Android) allows you to configure device settings and access our quick guide at the click of a button. The SRL can also easily connect to the Sena Ride Connected App to intercom with a virtually limitless amount of riders over an infinite range, so long as you are connected to a mobile network. GENERAL FEATURES Talk time: 10 hours Operating temperature: 14ºF - 131ºF (-10ºC - 55ºC) Speaker: driver unit 31.9 mm thickness 4.4 mm Boom microphone: length 55 mm Wire between speakers: length 85 mm Weight: Module: 100 g (3.53 oz)

BLUETOOTH Headset Profile (HSP) Hands-Free Profile (HFP) Advanced Audio Distribution Profile (A2DP) Audio Video Remote Control Profile (AVRCP) Bluetooth 4.1 Technology

BATTERY Charging time: 2.5 hours Type: Lithium polymer

AUDIO Advanced Noise Control™ Built-in SBC Codec Wide volume control Sample rate: max. 48 kHz (DAC)

CERTIFICATES CE, FCC, IC

INTERCOM Working distance: up to 1.6 kilometers (1.0 mile) in open terrain

AVAILABLE SPRING 2018

MSRP

$299.99

SENA SRL (SHOEI RIDER LINK) COMMUNICATION SYSTEM Part# 0501-0000-01 FM RADIO Built-in FM radio with RDS AF (Radio Data System Alternate Frequencies) Radio region: Worldwide Radio frequency specifications: 64 - 108MHz 10 preset station memory with automatic scan function

COMMUNICATION ACCESSORIES

HANDLEBAR REMOTE

WRISTBAND REMOTE

The SENA Handlebar Remote gives you control over your SENA BlueTooth® communication gear, while reducing the risks of taking your hands off of the handlebars while riding. Uses lithium polymer battery.

The SENA Wristband Remote gives you full control over your SENA BlueTooth® communication gear, and features glove-friendly buttons, a joystick, and longlasting battery life. Uses lithium polymer battery.

Part # 0520-2001-00

MSRP

$99.00

MSRP

$99.00

Part # 0520-2101-00

RC4 4-BUTTON REMOTE

RC3 3-BUTTON REMOTE

The RC4 is a sleek device, which mounts to the handlebars of your bike and offers complete control of your SENA BlueTooth® Headset. Ride safely with the convenient 4-button control at your fingertips. Uses CR2016 lithium coin battery.

Have full control over your SENA BlueTooth® communication gear at your fingertips with the versatile RC3. Uses CR2016 lithium coin battery.

MSRP

$99.00

Part # 0520-2301-00

MSRP

$99.00

MICROPHONE SPONGES

USB POWER/ DATA CABLE MSRP

$3.95

Part # 0530-1001-00

Part # 0520-2201-00

Helps cut excess wind noise while communicating on the road. Pack of 5.

MSRP

$5.95

Part # 0530-6001-00

WORLDWIDE WALL CHARGERS

MSRP

5-Piece Set Part # 0530-2001-00

$14.95

online / www.helmethouse.com

ONE WITH THE ROAD SHOEI presents the J-Cruise, our premium open-face helmet. The J-Cruise offers the open feeling and easy handling you’d expect from an open face touring helmet, along with a higher level of stability and function to satisfy the needs of today’s performance rider.

The result: state-of-the-art, high tech protection combined with the open-air freedom to experience the exhilaration of the ride at its fullest.

CJ-2 SHIELD QSV-1 SUN SHIELD The J-Cruise comes equipped with a CJ-2 shield, featuring a slight contour or “air dam” along the bottom to reduce wind entry. When down, the shield is kept firmly in place with an improved, easy to use shield lock mechanism. The CJ-2 shield includes built-in pins for a Pinlock EVO® fog resistant system (sold separately).The shield base has also been improved; a simple “down & press” action seals the shield into a secure dual-ridge window bead, further reducing wind and rain entry. The J-Cruise also features SHOEI’s exclusive QSV-1 retractable, built-in sun shield. Built to the standard of high-grade sunglasses, the QSV-1 not only reduces glaring sunlight, but also eliminates visual distortion, ensuring an optimal view while riding.

COMPACT, STYLISH SHAPE SHOEI has modified the shape of the J-Cruise to accommodate the addition of a built-in sun shield, resulting in a modern, stylish look. The shape is further streamlined with the inclusion of a rear air spoiler that helps increase stability and safety at high speeds. ©2018 Helmet House, Inc

OPEN-FACE HELMET Channel for Eyeglass Earpieces

3D MAX-DRY INTERIOR

3D Center Pad

The J-Cruise’s fully removable and washable interior, consisting of a 3D center pad, cheek pads, and chinstrap cover, is designed to correspond to most head shapes. A multi-layer polyurethane foam construction is utilized in the cheek pads, ranging from the softest padding against the rider’s cheek to the firmest against the helmet shell. A channel has been included at the top of each cheek pad to accommodate eyeglass earpieces. Multi-Layer Cheek Pads

FOUR SHELL SIZES • FOUR LINER SIZES HELMET SIZE

SHELL

EPS LINER

35mm

CHEEK PAD (Standard)

EPS Liner

CHEEK PAD (Optional)

39mm

35mm

2XL

31mm

All sizes of cheek pads are interchangeable in all helmet sizes

NOTE: Optional 43mm cheek pad available

VENTILATION Rider comfort helps improve concentration. The ventilation system of the J-Cruise is engineered to help maintain comfort during long rides. Fresh air is brought into the helmet through the forehead vent, which is regulated by a sliding shutter. Hot air is simultaneously exhausted through two top rear vents, as well as through the sun shield’s housing and out a lower rear outlet, helping to avoid heat buildup when the shield is down. Includes Pinlock® Prepared Shield Fog Resistant System

LIGHT WEIGHT, FLEXIBLE SHELL Multi-Ply Matrix AIM (Advanced Integrated Matrix) — A high performance combination of advanced shell materials adds up to a lightweight shell with increased rigidity and elasticity.

ONE WITH THE ROAD

42 ®

O P E N -FA CE H ELMET SHOEI’s J-Cruise is the premium open-face helmet for today’s rider. State-of-the-art, high tech protection combines with open-air freedom for a safe and exhilarating riding experience. • Lightweight, Multi-Ply Matrix AIM (Advanced Integrated Matrix) shell • Adjustable top and rear exhaust vents • A multi-piece EPS liner allows for smooth passage of air, improving cooling performance • Easily removable shield secured by the shield stopper to prevent unexpected opening at speed • Five layer construction in cheek pads • 3D Max-Dry removable, washable interior liner • Padded chin strap Internal Sun Shield System • Built in QSV-1 sun shield gives riders instant relief from sun glare in one quick motion • Shield meets ANSI Z80.3-2010 standard for REBORN non-prescription eyeglasses MSRP TC-1 • Large and easy to reach switch activates the 3D $599.99 REBORN injection-molded inner sun shield • Distortion-free shield blocks 99% of harmful UV rays Sizes TC-1 TC-5 • Forehead area of the outer shell is raised slightly to S 0130-1001-04 0130-1005-04 accommodate the internal sun shield, helping allow for the integrity of the helmet’s inner EPS liner M 0130-1001-05 0130-1005-05 to remain intact L 0130-1001-06 0130-1005-06 CJ-2 Face Shield System XL 0130-1001-07 0130-1005-07 • QR-N base plates allow tool-less shield removal and 2XL 0130-1001-08 0130-1005-08 eliminate side covers for a flush, quiet fit • Wide, three dimensionally curved shield offers increased peripheral vision and optical clarity • Contoured air dam along the bottom edge helps prevent wind from blowing up under the shield • Scratch-resistant coating • 99% protection from harmful UV A & B rays • One-piece injection-molded for consistent fit • 10mm longer than the CJ-1 it replaces • Pinlock®-ready face shield Includes Pinlock® Prepared Shield SOLIDS BLACK WHITE Sizes Black White Fog Resistant System XS 0130-0105-03 0130-0109-03 See page 48 S 0130-0105-04 0130-0109-04 SOLIDS MSRP M 0130-0105-05 0130-0109-05 $499.99 L 0130-0105-06 0130-0109-06 MATTES & XL 0130-0105-07 0130-0109-07 METALLICS MSRP 2XL 0130-0105-08 0130-0109-08 $530.99 REAR VIEW

METALLICS & MATTES Sizes

Wine Red

XS S M L XL 2XL

0130-0111-03 0130-0111-04 0130-0111-05 0130-0111-06 0130-0111-07 0130-0111-08

Anthracite

Brilliant Yellow

Matte Black

0130-0117-03 0130-0123-03 0130-0135-03 0130-0117-04 0130-0123-04 0130-0135-04 0130-0117-05 0130-0123-05 0130-0135-05 0130-0117-06 0130-0123-06 0130-0135-06 0130-0117-07 0130-0123-07 0130-0135-07 0130-0117-08 0130-0123-08 0130-0135-08 SHOEI SHELF TALKER J-CRUISE Part# 02-846

Packaging:

DOT-218 AIM (Advanced Integrated Matrix) Shell 3.36 lbs / 1528 grams (approx, based on Size Medium Solid Color) Individually wrapped, bagged and boxed, 8 per master carton

WINE RED

BRILLIANT YELLOW

0130-0137-03 0130-0137-04 0130-0137-05 0130-0137-06 0130-0137-07 0130-0137-08

TECHNICAL INFORMATION Standards: Construction: Weight:

ANTHRACITE

Matte Deep Grey

REBORN TC-5

MATTE BLACK

MATTE DEEP GREY

Please Note: Replacement shields and parts for these helmets may be found on pages 64-70.

toll free / 1-800-421-7247 online / www.helmethouse.com

ONE WITH THE ROAD

CJ-2SP SHIELD and

V - 44 0 VI S O R This new shield and visor from SHOEI is specifically designed for the J-Cruise helmet. It is a new shield, differing from the standard CJ-2 shield in that it accommodates the new V-440 visor. • CJ-2SP shield and V-440 visor have to be used together as an integrated set • Shield and visor are sold separately • Shield and visor need to be assembled prior to installing on the J-Cruise helmet • Visor available in black or white CJ-2SP Face Shield System • QR-N base plates allow tool-less shield removal and eliminate side covers for a flush, quiet fit • Wide, three dimensionally curved shield offers increased peripheral vision and optical clarity • Contoured air dam along the bottom edge helps prevent wind from blowing up under the shield • Scratch-resistant coating • 99% protection from harmful UV A & B rays • One-piece injection-molded for consistent fit • 10mm longer than the CJ-1 it replaces • Pinlock®-ready face shield

SHIELD MSRP

Shown with CJ-2SP shield and V-440 visor

Fog Resistant System

VISOR MSRP

$69.99

J-CRUISE CJ-2SP SHIELD Part # 0230-9400-00

J-CRUISE CJ-2/CJ-2SP PINLOCK LENS Clear Part # 0230-9800-00

$31.20

J-CRUISE V-440 VISOR Black Part #0230-6001-05 White Part # 0230-6001-09

THE WORLD’S PREMIER OPEN-FACE HELMET

O P EN - F A C E H ELMET

The RJ Platinum-R establishes a higher standard for what an open-face helmet should be, with a fully removable, washable, adjustable interior, enhanced ventilation performance, and a remarkably quiet riding experience. • Lightweight, Multi-Ply Matrix AIM+ (Advanced Integrated Matrix Plus) shell • Adjustable top intake and rear exhaust vents • A dual layer EPS liner allows for smooth passage of air, improving cooling performance • SHOEI’s distinctive GT visor • Soft and comfortable 3D liner • Cheek pad channels for eyeglasses • Removable, washable interior • Padded chin strap

WINE RED MATTES & METALLICS MSRP XS-2XL

SOLIDS MSRP XS-2XL

$328.99

$349.99

3XL

$364.99

$373.99

Adjustable Air Intake

Adjustable Exhaust Vent

TECHNICAL INFORMATION Standards: Snell 2015 and DOT-218 Approved Construction: AIM+ (Advanced Integrated Matrix Plus Multi Fiber) Shell Weight: 2.86 lbs / 1300 grams (approx, based on Size Medium Solid Color) Packaging: Individually wrapped, bagged and boxed, 6 per master carton

toll free / 1-800-421-7247 online / www.helmethouse.com

RJ PLATINUM-R SHOEI VENTILATION SYSTEM

Cheek Pads

Fits Sizes

Sizes:

01-218 01-219 01-220 01-221 01-222 01-223

3XL OPTIONAL XS/XL/2XL OPTIONAL 2XS/SM/MD/LG OPTIONAL

31mm 33mm 35mm 37mm 39mm 41mm

Please see page 80 for center pad info.

THE WORLD’S PREMIER OPEN-FACE HELMET

BLACK

WHITE

LIGHT SILVER

ANTHRACITE METALLIC

MATTE BLACK

CRYSTAL WHITE

MATTE GREY

PEARL GREY

O PEN-FACE HEL MET

Sizes XS S M L XL 2XL 3XL

SOLIDS

MATTES & METALLICS

Black

White

Sizes

Light Silver

02-601 02-602 02-603 02-604 02-605 02-606 02-691

02-607 02-608 02-609 02-610 02-611 02-612 02-692

XS S M L XL 2XL 3XL

02-619 02-620 02-621 02-622 02-623 02-624 02-693

Anthracite Metallic

Matte Black

Wine Red

Crystal White

Matte Grey

Pearl Grey

02-625 02-626 02-627 02-628 02-629 02-630 —

02-631 02-632 02-633 02-634 02-635 02-636 02-695

02-637 02-638 02-639 02-640 02-641 02-642 —

02-661 02-662 02-663 02-664 02-665 02-666 —

02-649 02-650 02-651 02-652 02-653 02-654 —

02-655 02-656 02-657 02-658 02-659 02-660 —

SHOEI SHELF TALKER RJ Platinum-R Part# 02-843

REPLACEMENT VISOR RJ Platinum-R Part# 01-349

toll free / 1-800-421-7247 online / www.helmethouse.com

FOR EVERY Road

Adventure riding essentially knows no bounds. SHOEI’s Hornet X2 offers serious adventure touring and dual-sport enthusiasts the optimal balance between on- and off-road form and function. Designed to maintain peak performance without compromising the core values of long distance touring, the Hornet X2 is a true all-road, all-weather helmet.

DESIGN CONCEPT SHOEI’s Hornet X2 is a hybrid of a premium road and off-road helmet. The shape of the mouthpiece and chin bar area is designed to improve air intake and ventilation performance, while giving the rider additional air space needed to accommodate heavy breathing during off-road riding. Improving on the traditional off-road mouthpiece, the Hornet X2 provides additional protection in the event of adverse weather. A multi-stage lower vent shutter allows riders to fine tune airflow for most riding conditions.

FOUR SHELL SIZES The Hornet X2 features SHOEI’s exclusive Multi-Ply Matrix AIM+ shell construction. The shell is incredibly strong, extremely lightweight, and comes in four shell sizes to ensure a custom fit for heads between sizes XS-2XL.

EMERGENCY QUICK RELEASE SYSTEM +

Using technology from SHOEI’s racing helmets, the Hornet X2 is equipped with the Emergency Quick Release System (E.Q.R.S.)+ that allows emergency medical personnel to easily remove the cheek pads from an injured rider’s helmet, thus allowing the helmet to be safely lifted from the head without creating unnecessary neck strain.

V-460 VISOR

Emergency Quick Release System Pull Tabs

The Hornet X2 has spent hours of development, both on the road and in SHOEI’s wind tunnel, to achieve the proper balance between aerodynamics and traditional visor functionality. Strategically placed vent louvers work with an innovative wedge shape to allow wind to pass through unobstructed, reducing drag and lift at high speed. Air is pushed into the helmet’s upper air intake for optimal cooling. Quarter-turn screws allow for quick and easy tool-less removal and installation. ©2018 Helmet House, Inc

3D MAX-DRY SYSTEM II INTERIOR The Hornet X2 is equipped with a fully removable, washable, and replaceable 3D Max-Dry System II interior. SHOEI’s exclusive Max-Dry System II liner material absorbs and dissipates sweat and moisture REMOVABLE EAR PADS twice as fast as traditional nylon interiors, making it ideal for long riding days. The 3D center pad components are threedimensionally shaped to match the contours of the head, providing a firm yet comfortable fit. 3D-shaped multi-layer cheek pads are also available in multiple thicknesses for a fully customizable fit.

VENTILATION PERFORMANCE In designing the Hornet X2, SHOEI utilized its state-of-the-art wind tunnel facility to help develop the optimal balance between airflow, silence and functionality. A large, multi-position lower air intake/defroster optimized for fresh air intake and improved vision. Two shutter-controlled upper air vents offer optimal air intake and head cooling. Four uniquely-positioned rear exhaust outlets to take better advantage of negative pressure suction, and three neck outlet vents work together to yield unrivaled cool air intake and hot air exhaust.

CNS-2 SHIELD and QR-N BASE PLATE

SHOEI’s CNS-2 shield offers 99% protection against the sun’s damaging UV rays and a distortion-free view, thanks to the 3D injection-molding process. An innovative rib along the top edge improves rigidity and eliminates bending. The Hornet X2’s QR-N base plate system facilitates quick and efficient shield changes when on the road. Strengthened spring-loaded technology pulls the shield back against the window beading to protect against dust, wind, and rain with every closure.

THICKER, MORE DURABLE WINDOW BEADING

QUICKRELEASE BASE PLATE

DUAL-LAYER/MULTI-DENSITY EPS LINER The Hornet X2’s Dual-Layer, Multi-Density EPS liner utilizes varying densities of foam in key areas around the head, providing enhanced impact absorption. Air tunnels created in the EPS liner provide superior ventilation by allowing unrestricted flow of cooling air through and out of the liner. Precise placement of multi-density EPS liner material yields a more compact, lightweight design. HELMET SIZE

2XL

SHELL

EPS LINER

Standard Standard Optional

XXL

S13

XL9

XL5

39mm

35mm

31mm

ALL CHEEK PAD SIZES INTERCHANGEABLE IN ALL HELMET SIZES

NOTE: Optional 43mm cheek pads available

FOR EVERY ROAD

The all-new design of the SHOEI Hornet X2 helmet is ideal for the dual-sport/adventure market that strikes the optimal balance between on and off road form and function. The Hornet X2 is a true all-road, any-condition helmet.

FEATURES

Multi-Ply Matrix AIM+ Shell Construction • Smaller, lighter yet stronger shell design; compact and aerodynamic • Four shell sizes ensure a custom fit • Dual layer multi-density EPS liner accommodates a more compact design without compromising ventilation CNS-2 Shield System • All-new CNS-2 3D injection-molded shield offers a distortion-free view • Innovative ribs on the top edge of the shield improve rigidity when opening and closing • QR-N base plate system offers quick and efficient shield removal without having to remove the visor • Improved shield locking system • Pinlock® EVO shield and lens included 3D Max-Dry System II Interior • Center pad components are three-dimensionally shaped to match contours of the rider’s head, allowing a comfortable fit while maintaining a firm hold for high speed riding • 3D-shaped cheek pads available in multiple thicknesses for a custom fit • Max-Dry System II liner material quickly absorbs and dissipates sweat and moisture • E.Q.R.S. (Emergency Quick-Release System) allows emergency personnel to easily remove cheek pads from an injured rider’s helmet • Removable ear pads • Breath guard and chin curtain included V-460 Visor • All-new V-460 visor is the result of many hours in SHOEI’s wind tunnel, featuring an innovative wedge shape with strategically placed vent louvers which allow wind to pass through unobstructed at high speed Ventilation • A large, multi-position lower air intake/defroster • Two shutter-controlled upper air vents • Four uniquely-positioned rear exhaust outlets • Three neck outlet vents

WHITE

SOLIDS MSRP

$594.99 MATTES & METALLIC MSRP

$603.99

REAR VIEW

SHIELD UP WITH GOGGLES

TECHNICAL INFORMATION Standards: Construction: Weight: Packaging:

Snell M2015 and DOT-218 Approved AIM+ (Advanced Integrated Matrix Plus Multi Fiber) 3.99 lbs / 1813 grams (approx. for Size Medium Solid Color) Individually wrapped, bagged and boxed, 6 per master carton

Includes Shield and Lens Fog Resistant System

CNS-2 PINLOCK® SHIELD CLEAR CNS-2 PINLOCK® SHIELD DARK SMOKE CNS-2 SPECTRA SHIELD SILVER PINLOCK® EVO LENS EAR PAD CHIN CURTAIN

0224-9400-00 0224-9405-00 0224-9407-00 0224-9300-00 0209-4705-00 0212-3705-00

SHIELD REMOVED

toll free / 1-800-421-7247 online / www.helmethouse.com

FOR EVERY ROAD

BLACK

SILVER

MATTE BLACK

MATTE DEEP GREY

A D V ENTUR E HEL MET METALLIC & MATTES

SOLIDS Sizes

Black

White

Sizes

Silver

Matte Black

Matte Deep Grey

XS S M L XL 2XL

0124-0105-03 0124-0105-04 0124-0105-05 0124-0105-06 0124-0105-07 0124-0105-08

0124-0109-03 0124-0109-04 0124-0109-05 0124-0109-06 0124-0109-07 0124-0109-08

XS S M L XL 2XL

0124-0107-03 0124-0107-04 0124-0107-05 0124-0107-06 0124-0107-07 0124-0107-08

0124-0135-03 0124-0135-04 0124-0135-05 0124-0135-06 0124-0135-07 0124-0135-08

0124-0137-03 0124-0137-04 0124-0137-05 0124-0137-06 0124-0137-07 0124-0137-08

SHOEI SHELF TALKER HORNET X2 Part# 02-858

NAVIGATE TC-2

NAVIGATE TC-3 (Matte)

NAVIGATE TC-5 (Matte)

NAVIGATE TC-8 MSRP

$715.99 REAR VIEW

toll free / 1-800-421-7247 online / www.helmethouse.com

Sizes XS S M L XL 2XL

TC-2 0124-1202-03 0124-1202-04 0124-1202-05 0124-1202-06 0124-1202-07 0124-1202-08

NAVIGATE

TC-3 0124-1203-03 0124-1203-04 0124-1203-05 0124-1203-06 0124-1203-07 0124-1203-08

TC-5 0124-1205-03 0124-1205-04 0124-1205-05 0124-1205-06 0124-1205-07 0124-1205-08

TC-8 0124-1208-03 0124-1208-04 0124-1208-05 0124-1208-06 0124-1208-07 0124-1208-08

Please Note: Replacement visors, shields and parts for these helmets may be found on pages 61 and 65.

T H E F U T U R E O F S A F ET Y H A S AR R I VE D DESIGN CONCEPT The world’s most evolved motocross helmet has evolved. Long overdue? Perhaps. But world-class engineering and quality take time. Fully loaded with next-level performance, safety, style, and progression, the all-new VFX-EVO proudly boasts the SHOEI-exclusive Motion Energy Distribution System (M.E.D.S.) — strategically engineered to reduce rotational acceleration energy to the head in the event of an accident. Completely reimagined and re-engineered without sacrificing an ounce of the quality and performance that have given SHOEI motocross and off-road riders championship-worthy confidence for nearly a decade, the all-new VFX-EVO has finally arrived. Worth the wait? We thought you’d agree.

MOTION ENERGY DISTRIBUTION SYSTEM The proprietary, SHOEI-exclusive Motion Energy Distribution System (M.E.D.S.) features a dual-layer, multi-density EPS liner that, in addition to preserving the lightweight, impact-absorbing characteristics of SHOEI’s traditional EPS systems, has been specially engineered to reduce rotational acceleration energy to the head in the event of an accident. Anchored by a larger center column, the inner layer of the dual-layer system swings during impact, allowing its three strategically-designed perimeter columns to absorb the energy. The end result is a significant reduction of rotational forces to the rider’s head without sacrificing an ounce of quality or performance.

DUAL-LAYER / MULTI-DENSITY EPS LINER In addition to absorbing and reducing rotational energy thanks to the all-new M.E.D.S. technology, the VFX-EVO’s dual-layer, multi-density EPS liner provides enhanced impact absorption by utilizing varying densities of foam in key area around the rider’s head. Channels between the EPS layers allow cooling air to travel unrestricted through the helmet, further enhancing the VFX-EVO’s superior ventilation characteristics. In addition to enhanced impact absorption and ventilation, the precise placement of multidensity EPS liner material yields a more compact, lightweight design.

MULTI-PLY MATRIX AIM+ SHELL Few characteristics of a motorcycle helmet are as critical as its first layer of defense, which is precisely why the all-new VFX-EVO features the SHOEI-exclusive Multi-Ply Matrix AIM+ shell construction. Combining fiberglass with lightweight organic and high-performance fibers, the VFX-EVO’s proprietary AIM+ shell provides optimal impact-absorption, strenth, and elasticity, and is available in four shell sizes to ensure a custom fit for heads between the sizes of XS-XXL.

Proprietary technology integrates a multi-ply matrix. Hand laid interwoven layers of fiberglass with organic fibers and resin. SHOEI’s strongest, lightest, most elastic shell.

SHELL DESIGN Through a new state-of-the-art shell forming technology exclusive to SHOEI, the VFX-EVO incorporates the aerodynamic advantages of a spoiler into its shell, and consistent shell thickness guarantees the proper strength and weight of each and every helmet. The larger eyeport allows for a greater peripheral field of vision and facilitates oversized goggles. Additionally, the shellintegrated goggle channel has been optimized to form a perfect goggle channel retention system.

VENTILATION PERFORMANCE Racing environments can be extremely hot and fatiguing, which is precisely why next-level ventilation performance was a top priority when SHOEI engineers conceptualized the VFX-EVO. Boasting sixteen intake and exhaust vents in total (one more additional intake and two additional exhaust vents more than the VFX-W) — all strategically shaped and located to maximize airflow and negative air pressure suction to the rear of the helmet — the VFX-EVO’s ventilating prowess is second to none. Along with optimized shell aerodynamics, cooling air channels in the VFX-EVO’s dual-layer EPS liner further enhance its world-class ventilation performance. ©2018 Helmet House, Inc

V-470 VISOR The all-new V-470 visor has been specially designed to flow with the styling and funtionality of the VFX-EVO’s aggressive new shell shape. With a massive field of vision and optimal roost protection still top priorities, the V-470 has been engineered to utilize the highest point of adjustability as its standard “home” position. Though aligning seamlessly with the shape of the shell when at the highest point, the V-470 also features a new flange mechanism to easily find the home position (even while wearing the helmet), and also helps to prevent unexpected movement during aggressive off-road riding. Made of a high-grade polycarbonate, the V-470 screws are extremely durable, yet capable of sheering off in the event of an impact to help prevent unnecessary forces to the rider’s head.

MOUTH PIECE AND CHIN BAR Wind-tunnel refined and featuring larger openings to optimize the ability to pull cooling air in through the chin bar of the helmet, the VFX-EVO’s mouthpiece is equal parts style, functionality, and safety. Reinforced by a strategically-placed strip of AIM+ shell material, the mouthpiece also features an aluminum mesh screen and a removable, washable foam filter to help prevent roost, rocks, mud, and dust from entering the helmet. The entire chin bar of the VFX-EVO features highquality EPS liner material for enhanced impact absorption.

3D MAX DRY INTERIOR SYSTEM The VFX-EVO is equipped with a fully removable, washable, replaceable, and adjustable 3D Max-Dry Interior System. SHOEI’s exclusive Max-Dry liner material absorbs and dissipates sweat and moisture twice as fast as traditional nylon interiors, and in combination with the VFX-EVO’s superior ventilation system, keeps racers and aggressive riders alike cool and dry during intense riding sessions. In addition to the Max-Dry material utilized on the forehead and cheek area, a soft yet durable fabric is applied to the lower part of the cheek pads for a plusher overall fit and feel. The VFX-EVO’s 3D center pad components are three-dimensionally shaped to match the contours of a rider’s head, allowing for an extremely comfortable fit while maintaining the firm hold necessary for distraction-free, aggressive riding and racing. Additionally, the VFX-EVO’s 3D center pads and multi-layer cheek pads are available in different thicknesses for a customizable fit.

EMERGENCY QUICK-RELEASE SYSTEM (E.Q.R.S.) Borrowing technology originally developed for SHOEI’s groundbreaking VFX-W and X-Twelve racing models, SHOEI equipped the all-new VFX-EVO with its exclusive Emergency QuickRelease System that allows emergency medical personnel to easily remove the cheek pads from an injured rider’s helmet. With the cheek pads removed, the helmet can be safely lifted from a rider’s head without creating unnecessary strain in the neck area.

MUD GUARD

SHOEI has developed a new mud guard which is specially shaped so as not to interfere with the wearing of goggles. Dedicated plastic tabs help hold the mud guard firmly in place during serious off-road riding conditions.

toll free / 1-800-421-7247 online / www.helmethouse.com

HELMET SIZE

XXL

SHELL

LINER

HELMET SIZE CENTER PAD Standard CHEEK PAD

Standard Optional

XS S13 39mm

XL9

35mm 35mm 35mm 35mm All sizes of cheek pads are interchangeable in all helmet sizes

XXL XL5 31mm

THE FUTURE HAS ARRIVED

52 ®

O FF-R O A D H ELMET FEATURES

Multi-Ply Advanced Integrated Matrix Plus (AIM+) Shell • Proprietary technology integrates a six-ply matrix • Hand-laid interwoven layers of fiberglass and lightweight organic and high-performance fibers • SHOEI’s strongest, lightest, most elastic shell provides optimal impact absorption Ventilation Performance • Boasting sixteen intake and exhaust vents in total • Wind tunnel-tested for optimal vent port shapes, sizes, and locations • Improved negative air pressure suction for enhanced cool-air intake and hot-air expulsion • Cooling air channels in the dual-layer EPS liner further enhance airflow • Optimized to excel in the demanding confines of WHITE off-road and motocross environments 3D Max-Dry Interior System • Fully removable, washable, replaceable, and adjustable • Max-Dry liner material absorbs and dissipates sweat two times faster than traditional nylon interiors SOLIDS MSRP • Soft yet durable lower cheek pad fabric for a plush fit and feel $539.00 • Multi-layer cheek pads for maximum comfort and MATTE & superior helmet stabilization METALLICS MSRP • Three-dimensionally shaped to match the contours $559.00 of a rider’s head Motion Energy Distribution System (M.E.D.S.) • Proprietary, SHOEI-exclusive rotational energy REAR VIEW absorption technology • Anchored by larger center column, inner layer that swings during impact • Strategically-designed perimeter columns absorb rotational energy • Significant reduction of rotational forces to the rider’s head Emergency Quick Release System • Preserves the lightweight, impact-absorbing character(E.Q.R.S.): Pull straps enable the SHOEI SHELF TALKER istics of SHOEI’s traditional EPS liner systems removal of cheek pads for easy VFX-EVO Part# 02-857 removal of helmet by emergency Dual-Layer / Multi-Density EPS Liner personnel in event of an accident • Provides enhanced impact absorption by utilizing varying densities of foam • Allows cooling air to travel unrestricted through tunnels created by the EPS • Precise placement of multi-density EPS material yields a more compact layer design • M.E.D.S. technology helps absorb and reduce rotational energy • High-quality EPS liner material throughout the entire chin bar for enhanced impact absorption V-470 Visor • Specially designed for a seamless connection MATTE BLACK with the shell BLACK • New flange mechanism easily finds home position SOLIDS & MATTE and prevents unexpected movement • High-grade polycarbonate screws are capable of Sizes Black White Matte Black shearing off on impact to help prevent forces to XS 0146-0105-03 0146-0109-03 0146-0135-03 the rider’s head S 0146-0105-04 0146-0109-04 0146-0135-04 Emergency Quick Release System (E.Q.R.S.) M 0146-0105-05 0146-0109-05 0146-0135-05 • Allows emergency medical personnel to easily and safely L 0146-0105-06 0146-0109-06 0146-0135-06 remove the cheek pads from an injured rider’s helmet XL 0146-0105-07 0146-0109-07 0146-0135-07 • Helmet can be gently removed from the rider’s head with minimal load placed on his/her neck 2XL 0146-0105-08 0146-0109-08 0146-0135-08 TECHNICAL INFORMATION Standards: Snell M2015 and DOT-218 Approved Construction: AIM+ (Advanced Integrated Matrix Plus Multi Fiber) shell Weight: 3.36 lbs / 1522 grams (approx, based on size medium solid color) Packaging: Individually wrapped, bagged and boxed, 6 per master carton

Please Note: Replacement visors and parts for these helmets may be found on page 64.

THE FUTURE HAS ARRIVED

GLAIVE TC-1

GLAIVE TC-5

GLAIVE TC-8 GLAIVE TC-2 MSRP

$719.00 REAR VIEW

Sizes XS S M L XL 2XL

TC-1 0146-1001-03 0146-1001-04 0146-1001-05 0146-1001-06 0146-1001-07 0146-1001-08

GLAIVE

TC-2 0146-1002-03 0146-1002-04 0146-1002-05 0146-1002-06 0146-1002-07 0146-1002-08

TC-5 0146-1005-03 0146-1005-04 0146-1005-05 0146-1005-06 0146-1005-07 0146-1005-08

TC-8 0146-1008-03 0146-1008-04 0146-1008-05 0146-1008-06 0146-1008-07 0146-1008-08

ZINGER TC-1

Sizes XS S M L XL 2XL

ZINGER TC-10 (Matte)

MSRP

$719.00

ZINGER TC-2 (Matte)

ZINGER

TC-1 0146-1101-03 0146-1101-04 0146-1101-05 0146-1101-06 0146-1101-07 0146-1101-08

TC-2 0146-1102-03 0146-1102-04 0146-1102-05 0146-1102-06 0146-1102-07 0146-1102-08

TC-10 0146-1110-03 0146-1110-04 0146-1110-05 0146-1110-06 0146-1110-07 0146-1110-08

REAR VIEW

toll free / 1-800-421-7247 online / www.helmethouse.com

THE FUTURE HAS ARRIVED

BLAZON TC-1

Sizes XS S M L XL 2XL

BLAZON TC-6 MSRP

$719.00

BLAZON TC-5

BLAZON

TC-1 0146-1201-03 0146-1201-04 0146-1201-05 0146-1201-06 0146-1201-07 0146-1201-08

TC-5 0146-1205-03 0146-1205-04 0146-1205-05 0146-1205-06 0146-1205-07 0146-1205-08

TC-6 0146-1206-03 0146-1206-04 0146-1206-05 0146-1206-06 0146-1206-07 0146-1206-08

GRANT 3 TC-1

GRANT 3 TC-3 MSRP

$739.00 REAR VIEW

Sizes XS S M L XL 2XL

GRANT 3 TC-2

GRANT 3

TC-1 0146-1301-03 0146-1301-04 0146-1301-05 0146-1301-06 0146-1301-07 0146-1301-08

TC-2 0146-1302-03 0146-1302-04 0146-1302-05 0146-1302-06 0146-1302-07 0146-1302-08

TC-3 0146-1303-03 0146-1303-04 0146-1303-05 0146-1303-06 0146-1303-07 0146-1303-08

Please Note: Replacement visors and parts for these helmets may be found on page 64.

SHOEI BREATH GUARD and CHIN CURTAIN The breath guard fits in the chin bar and deflects your breath, to help prevent shield fogging. The chin curtain deflects unwanted wind from hitting your chin and other parts of your face, installs snugly at the bottom of most SHOEI full-face helmets. CHIN CURTAIN Fits: X-Twelve/Qwest/RF-1100, RF-1200 X-Fourteen RF-SR NEOTEC GT-Air Hornet X2 NEOTEC II Multitec BREATH GUARD Fits: X-Twelve X-Fourteen RF-SR/NEOTEC II RF-1100/Qwest/Neotec/GT-Air, RF-1200 Hornet X2

0212-3705-00 0212-3705-00 0212-3705-00 0217-3705-00 0218-3705-00 0212-3705-00 0216-3905-00 01-253 0212-3505-00 0204-3505-00 0213-3505-00 0213-3505-00 0224-3505-00

CHIN CURTAIN

BREATH GUARDS

toll free / 1-800-421-7247 online / www.helmethouse.com CWF-1/CWR-F SHIELD TEAR-OFFS 2.5 mills 5-Pack part #0213-9900-00

SUPERTHINS

TEAR-OFFS

High-quality tear-offs for all your racing or riding needs. NOTE: #1018 is the best fit for SHOEI CF-1, CX-1V, HJC HJ-20, HJ-07, HJ-09, and HJ-26 with tear-off posts. #1035 is the best fit for SHOEI CWF-1 and CWR-F. CWF-1 #1035 - 5mills / 10pk Clear Standard Cut #1001 - 2mills / 15pk Clear Full Cut #1018 - 3mills / 15pk Clear Full Cut #1018 - 5mills / 10pk Clear

30-066 30-067 30-068 30-069

HELMET SACK

AIR MASK Fits over nose and chin to prevent exhaled air from fogging shields.

01-339 0290-0405-00 0290-0505-00

The SHOEI Helmet Sack is made of a soft, stretchable, velvety fabric to help protect your helmet. A drawstring pulls it closed. SHOEI HELMET SACK 01-901

FLEECE LINED HELMET BAG Part #0291-0105-00

HELMET BAG X

Replacement for the X-Fourteen helmet cover Part #0291-0005-00

WANT TO ENHANCE YOUR MOTORCYCLE RIDE? SHOEI® TRANSITIONS® ADAPTIVE MOTORCYCLE SHIELDS SEAMLESSLY SELF-ADJUST FROM CLEAR TO DARK AND BACK AGAIN WITH CHANGING LIGHT CONDITIONS FOR ENHANCED VISUAL PERFORMANCE THROUGHOUT YOUR RIDE.

SUPERIOR RIDING PERFORMANCE

SHOEI® Transitions® adaptive shields solve this problem, Whether dominating the race track or out for a pleasure ride, motorcyclists know how important clear, crisp vision is. and even enhance vision, by seamlessly adjusting to Traditionally, riders dealt with changing light conditions by optimized darkness levels with the changing light. carrying two shields (one clear, one tinted) with them at all times.

TRANSITIONS OPTICAL - LEADERS IN PHOTOCHROMIC TECHNOLOGY Transitions Optical has been an industry leader in photochromic technology for 20 years and is known worldwide for its photochromic prescription eyeglasses: Transitions® lenses. The company’s continued commitment to innovation has helped Transitions® lenses to become the leading photochromic ophthalmic lens product and the number one eyecare professional-recommended photochromic lenses worldwide.

Transitions® adaptive sunwear is the company’s sunwear brand, which includes both prescription and non-prescription sunglass lenses, and motorcycle shields, that automatically darken and lighten in outdoor light. For the first time, with Transitions® adaptive shields, the company is expanding its product offering to non-ophthalmic products, bringing Transition’s® state-of-the-art technology to a broader audience.

Driven by innovation, the company has continually improved its core clear-to-dark product (Transitions® lenses), and has expanded in other areas with additional products that meet consumers’ visual needs, including sunwear and everyday products with varying features (lightly tinted to very dark and variable polarization).

Transitions® sunwear products are designed to enhance visual performance outdoors, optimizing the amount of darkness and color for specific outdoot activities like motorcycling, golf, driving, cycling, running, hunting/ target shooting, and water sports.

HOW PHOTOCHROMICS WORK

Photochromic technology allows visors to automatically and seamlessly change from clear to dark in sunlight. The process works when photochromic dyes embedded into the lens or shield react to UV light, changing levels of darkness with the sun. When UV light is removed, a chemical reaction driven by ambient heat reconverts the activated photochromic molecules to their original, clear form and the lens fades.

The amount darkening is a function of the competition between the activating and fading chemical reactions, the equilibrium condition established between them, and the specific photochromic molecules and the lens substrate. The more activated photochromic molecules that are present, the darker a lens becomes. The degree of darkness depends on the level of available UV radiation driving the activation reaction and the temperature of the lens, which drives the fade reaction. ©2018 Helmet House, Inc

PRODUCT DETAILS AND UV PROTECTION Transitions® adaptive sunwear products have a range of light transmission levels, all optimized for the specific activity the product is designed for. Specifically, the SHOEI® Transitions® adaptive shield: • Non-activated — virtually clear • Activated — darkens to a 15% light transmission level at 72º Fahrenheit and 23º Celsius • Full activation in two minutes • Fades to 50% transmission in two minutes • Like all Transitions® products, the shield blocks 100% of UV rays

TEMPERATURE

Like all photochromic products, temperature can cause fluctuation in performance. UV rays activate the photochromic molecules through a photochemical process — this makes the shield darken. The fade back reaction is actually driven by heat — so in extremely hot temperatures, the photochromic molecules are actually fading back while they are activating — this prevents the shield from fully darkening. Transitions® lens technology is the most advanced in the industry, and is the least temperature sensitive, but there will be some performance variables depending on the temperature.

SPECTRAL CURVE DATA 100

90 80 70

% TRANSMISSION

60 50 40 30 20 10 0 380

430

480

530

580

630

680

730

780

WAVELENGTH (NANOMETERS) UNACTIVATED

ACTIVATED

STANDARDS

SHOEI® Transitions® adaptive shields are designed to meet International Standards of Performance for driving. • Category as per ISO 8980-3 o Non-Activated — Category 0 o Activated — Category 3 • Traffic Signal recognition as per ISO 14889 • 100% protection from UVA and UVB as per ISO 8980-3 • 100% protection from UVA and UVB as per ANSI Z80.3 • Impact resistant as per US FDA Impact Resistant Regulation 21 CFR 801.410 • Impact resistant as per ANSI Z87.1 • Impact resistant as per ISO 14889 Section 5.2

SHOEI® TRANSITIONS® PHOTOCHROMIC SHIELD with PINLOCK® PINS CWR-1

0209-9755-00

Fits: RF-1200 & X-Fourteen

MSRP

$169.99 Fog Resistant System

NOTE: To prolong product life, do not store in sunlight.

TESTIMONIALS

Transitions® adaptive visors have been well-received in the motorcycle industry. A recent review by Roadracing World magazine said the visor was “Most excellent”, “Worth the price of admission”, and made an “amazing difference” in the reviewer’s ride.1

PROOFS AND SUBSTANTIATION • Transitions® lenses reduce squinting, eye fatigue and help prevent against eye strain.2 • Outside, Transitions® lenses reduce glare and enable riders to distinguish contrast more easily.3 1 Roadracing World magazine product review October 2010 2 Senson S. Light, Sight and Photochromics 2002:42., Scherick K. Enhancements to Quality of Vision With Photochromic Lenses and Antireflective Coating, 2004:5. 3 Senson S. Light, Sight and Photochromics 2002:42.

58 54

FOR FULL-FACE AND MODULAR HELMETS

F O G - R E S I S TA N T S Y S T E M S PINLOCK® FOG-RESISTANT LENS INSTALLED ON A CW-1 CLEAR SHIELD WITH PINLOCK® PINS.

PINLOCK EVO® FOG-RESISTANT LENS (Sold separately)

Specially designed to install on shields with built-in pins, the PINLOCK® Fog-Resistant Lens transforms your single shield into a dual lens shield that will resist any amount of fog buildup. • • • •

With ProSeal® Airtight chamber Interchangeable Easily cleaned

CWF-1 PINLOCK® SHIELDS WITH TEAR-OFF POSTS CLEAR

CLEAR

DARK SMOKE

CX-1V Clear Shield w/Pinlock® Pins CX-1 Clear Shield w/Pinlock® Pins

01-510 01-511

CX-1V Pinlock EVO® Lens Clear CX-1V Pinlock® Lens Dk. Smoke CX-1V Pinlock® Lens Lt. Smoke

01-520 01-513 01-514

Transitions® CWR-1 Photochromic Shield w/Pinlock® Pins

0209-9755-00

CWF-1 Shield w/Pinlock Pins & Tear-off Posts - Clear CWF-1 Shield w/Pinlock® Pins & Tear-off Posts - HD Yellow CWF-1 Shield w/Pinlock® Pins & Tear-off Posts - Dk Smoke

0213-9500-00 0213-9503-00 0213-9505-00

CWF-1 Pinlock® Lens Clear CWF-1 Shield Tear-offs - Pack of 5

0213-9600-00 0213-9900-00

NOTE: The CNS-1, CNS-3, NEOTEC®, NEOTEC II®, and GT-Air® shield should only accommodate the clear Pinlock® lens. Tinted Pinlock® lenses are not to be used on the Neotec® or GT-Air® CNS-1 shields. In addition, do not combine a Pinlock® tinted lens with a Pinlock® prepared tinted shield. Only use a Pinlock® clear lens with a Pinlock® prepared tinted shield.

toll free / 1-800-421-7247 online / www.helmethouse.com

LIGHT SMOKE

YELLOW

AMBER

DARK SMOKE

YELLOW

CW-1 Clear Shield w/Pinlock® Pins C-49 Clear Shield w/Pinlock® Pins CNS-1 Clear Shield w/Pinlock® Pins CNS-2 Clear Shield w/Pinlock® Pins CNS-2 Shield Dk. Smoke w/Pinlock® Pins CNS-2 Spectra Chrome w/Pinlock® Pins CWR-F Clear Shield w/Tear-Off Posts CWR-F Yellow Shield w/Tear-Off Posts CWR-F Smoke Shield w/Tear-Off Posts CWR-1 Shield Clear w/Pinlock® Pins CWR-1 Shield Hi-Def Yellow w/Pinlock® Pins CWR-1 Shield Dk. Smoke w/Pinlock® Pins CWR-1 Shield Hi-Def Orange w/Pinlock® Pins CWR-1 Shield Lt. Smoke w/Pinlock® Pins CWR-1 Shield Mellow Smoke w/Pinlock® Pins CWR-1 Spectra Blue w/Pinlock® Pins CWR-1 Spectra Chrome w/Pinlock® Pins CWR-1 Spectra Gold w/Pinlock® Pins CW-1 Shield Hi Def Yellow w/Pinlock® Pins CW-1 Shield Dk. Smoke w/Pinlock® Pins CW-1 Shield Lt. Smoke w/Pinlock® Pins CNS-3 Clear Shield w/Pinlock® Pins CJ-2 Shield Clear w/Pinlock® Pins CJ-2SP Pinlock® Shield Clear CWR-F Pinlock EVO Lens CWR-1, CW-1, CNS-1, CNS-3 Pinlock® Lens Clear C-49 Pinlock® Lens Clear CNS-2 Pinlock® EVO Lens CJ-2/CJ-2SP Pinlock® Lens Clear

0213-9400-00 0214-9400-00 0217-9100-00 0224-9400-00 0224-9405-00 0224-9407-00 0209-9500-00 0209-9503-00 0209-9505-00 0209-9400-00 0209-9403-00 0209-9405-00 0209-9406-00 0209-9415-00 0209-9425-00 0209-9402-00 0209-9407-00 0209-9413-00 0213-9403-00 0213-9405-00 0213-9415-00 0216-9100-00 0230-9100-00 0230-9400-00 0209-9300-00 0209-9800-00 0214-9300-00 0224-9300-00 0230-9800-00

SPECTRA CHROME

SPECTRA BLUE

SPECTRA GOLD

SPECTRA SHIELD An exciting shield for SHOEI helmets. Coated in a highvacuum chamber with metallic compounds, the Spectra shield by SHOEI gives a rainbow appearance while the coating improves eye protection by deflecting the sun’s harmful rays. • 99% protection from harmful UV A & B rays • Superb bright light eye protection • Space age technology • Impact resistant • Great looking

HALF-TINT SHIELDS

SPECTRA SHIELDS CX-1V Fits:

CNS-2 Fits: CW-1 CW-1 CW-1 CW-1 Fits:

CWR-1 CWR-1 CWR-1 Fits:

The SHOEI CX-1V and CW-1 half-tint shields provide riders with a versatile half-tint / half-clear shield option for changing light conditions.

CX-1V Half-Tint 01-422 SHOEI X-Eleven, RF-1000, TZ-R and Multitec series helmets CNS-2 Spectra Chrome SHOEI Hornet X2

0224-9407-00

CW-1 Blue 0213-9402-00 Chrome 0213-9407-00 Gold 0213-9413-00 Half-Tint 0213-9150-00 SHOEI X-Twelve, RF-1100, Qwest Spectra Spectra Spectra

CWR-1 with Pinlock® pins Spectra Blue 0209-9402-00 Spectra Chrome 0209-9407-00 Spectra Gold 0209-9413-00 SHOEI RF-1200, X-Fourteen, RF-SR

STANDARD & SPECTRA SHIELDS TINT & COLOR SAMPLES

Standard Clear

Spectra Chrome

Mellow Smoke

Light Smoke

Dark Smoke

Half-Tint

Spectra Blue

Spectra Gold

Hi-Def Orange

Hi-Def Yellow

Spectra Fire Orange

toll free / 1-800-421-7247 online / www.helmethouse.com

SHOEI HELMET DISPLAYS an d d isp lay c omp o n en t s Configurable for holding 20 or 40 helmets, display kits include one Single Frame Display Unit, along with the following replaceable accessories:

PLASTIC DISPLAY SHELF (20 or 40 each) 30-311

DOUBLE SHELF BRACKET

SIDE DOUBLE SHELF BRACKET*

(10 each) 30-472

(10 each) 30-473

*Side brackets are only included with the 40-shelf helmet display

SINGLE FRAME DISPLAY UNIT (No Grid) 30-471

20-SHELF HELMET DISPLAY KIT part #30-484

Maximize stock visibility, emphasize sales items, and easily update and consolidate store inventory with a sturdy, four-wheeled helmet display. These displays can be purchased as kits which include all the accessories needed to hold either 20 or 40 helmets. Additional accessories can be purchased separately (see facing page) to expand function: • SHOEI Display Signs • Sign Holders • Shelf Talkers • Shield Displayers

40-SHELF HELMET DISPLAY KIT part #30-481

SHOEI HELMET DISPLAY OPTIONAL ACCESSORIES

48” STREET HELMET HEADER SIGN

48” DIRT HELMET HEADER SIGN

SHOEI DISPLAY HEADER & SLATWALL SIGNS

24” LOGO HEADER

24” 48” 24” 48” 48”

Slatwall Header Unit Slatwall Header Unit Logo Header Street Helmet Header Sign Dirt Helmet Header Sign

3124-0000-24 3148-0000-48 3124-0101-24 3148-0105-48 3148-0106-48

and Header Units

SHELF TALKERS Attractive, informative card strips especially designed for use with the Shoei plastic display shelf. SHOEI SHELF TALKERS SHOEI SHOEI SHOEI SHOEI SHOEI SHOEI SHOEI SHOEI SHOEI SHOEI SHOEI

RJ PLATINUM-R GT-AIR J-CRUISE NEOTEC II X-FOURTEEN X-TWELVE RF-1200 QWEST RF-SR VFX-EVO HORNET X2

Part# 02-843 02-845 02-846 02-847 02-850 02-851 02-852 02-854 02-856 02-857 02-858

CLEAR ACRYLIC SIGN HOLDER 11” x 8.5” 11” x 17.5”

Sign Holder Sign Holder

8.5” x 11”

2018 SHOEI SLAT WALL POINT-OF-PURCHASE SIGNAGE

30-302 30-981

PRODUCT X-Fourteen Sign RF-1200 Sign GT-Air Sign NEOTEC II Sign Hornet X2 Sign VFX-W Sign RF-SR Sign VFX-EVO Sign

11” x 17”

11”x17” 02-820 02-822 02-824 02-826 02-828 02-830 02-832 02-834

8.5”x11” 02-821 02-823 02-825 02-827 02-829 02-831 02-833 02-835

MISCELLANEOUS SHOEI DISPLAY ITEMS

SHOEI HORIZONTAL BANNER Large 8’ x 4’ Small 4’ x 2’

SHOEI WINDOW CLING 12” x 8” part #01-996

01-994 01-995

FOAM-CORE SIGN 24” Wall Sign Black Blue

SHOEI SINGLE-SIDED DISPLAY SIGN

SHOEI TWO-SIDED DISPLAY SIGN

24” W x 13” H

24” W x 11” H part #30-477 NOTE: For use with Center Sign Holder part #30-438

Black Blue

01-986 30-561

NOTE: For use with Single-Side Sign Holder (pair) part #30-437

SHOEI VERTICAL BANNER With 12” Slatwall Hook 60”h x 11”w part #01-980

01-985 01-993

DUAL SHIELD DISPLAYER (Includes nuts & bolts) part #30-501 NOTE: Requires SHOEI CW-1 Base Plate part #0213-0605-00 and/or HJC HJ-09 Base Plate part #19-025

SHOEI GLASS CUBE DISPLAY CLING 11” Wide part #01-989

SHOEI MIRROR 11” W x 14” H part #01-977

toll free / 1-800-421-7247 online / www.helmethouse.com

OFF-ROAD HELMET ACCESSORIES HELMET MODEL

VFX-EVO

HELMET MODEL

VFX-W

OFF-ROAD VISORS 0246-6001-05 Black 0246-6001-09 White 0246-6001-35 Matte Black BLAZON 0246-6012-01 TC-1 0246-6012-05 TC-5 0246-6012-06 TC-6 GLAIVE 0246-6010-01 TC-1 0246-6010-02 TC-2 0246-6010-05 TC-5 0246-6010-08 TC-8 GRANT 3 0246-6013-01 TC-1 0246-6013-02 TC-2 0246-6013-03 TC-3 ZINGER 0246-6011-01 TC-1 0246-6011-02 TC-2 0246-6011-10 TC-10

MISCELLANEOUS PARTS CHIN STRAP COVER SET CHEEK PAD 0246-3805-00 0246-4005-31 (SET) 31mm MOUTHPIECE 0246-4005-35 (SET) 35mm 0246-2101-05 Black 0246-4005-39 (SET) 39mm 0246-2101-07 Lt Silver 0246-4005-43 (SET) 43mm 0246-2101-09 White CENTER PAD 0246-2101-13 LS Yellow 0246-4204-05 SM 5mm 0246-2101-31 Mt Shine Red 0246-4204-09 SM 9mm 0246-2101-35 Mt Black 0246-4204-13 SM 13mm 0246-2101-37 Deep Grey 0246-4204-17 SM 17mm 0246-2101-42 Mt Nt Blue 0246-4205-05 MD 5mm 0246-2101-52 Nt Blue 0246-4205-09 MD 9mm NECK OUTLET 0246-4205-13 MD 13mm 0246-2205-00 0246-4206-05 LG 5mm MOUTHPIECE FILTER 0246-4206-09 LG 9mm 0246-2805-00 0246-4206-13 LG 13mm MUD GUARD 0246-4207-05 XL 5mm 0246-1905-00 Black 0246-4207-09 XL 9mm 0246-1909-00 White 0246-4207-13 XL 13mm

OFF-ROAD VISORS 0245-6001-00 Paintable KDUB 2 0245-6001-05 Black 0245-6076-01 TC-1 0245-6001-06 Pure Orange 0245-6076-02 TC-2 0245-6001-07 Chrome 0245-6076-06 TC-6 0245-6001-09 White KDUB 3 0245-6001-23 Brilliant Yellow 0245-6081-01 TC-1 0245-6001-35 Matte Black 0245-6081-02 TC-2 0245-6001-77 Light Silver 0245-6081-10 TC-10 BARCIA KRACK 0245-6084-01 TC-1 0245-6080-02 TC-2 0245-6084-03 TC-3 0245-6080-11 TC-11 BLOCK PASS MAELSTROM 0245-6087-01 TC-1 0245-6085-01 TC-1 0245-6087-02 TC-2 0245-6085-04 TC-4 0245-6087-05 TC-5 0245-6085-08 TC-8 CAPACITOR MALICE 0245-6090-02 TC-2 0245-6074-01 TC-1 0245-6090-03 TC-3 0245-6074-02 TC-2 CROSSHAIR 0245-6074-05 TC-5 0245-6075-01 TC-1 0245-6074-08 TC-8 0245-6075-02 TC-2 0245-6074-09 TC-9 DASH REPUTATION 0245-6070-02 TC-2 0245-6082-01 TC-1 0245-6070-05 TC-5 0245-6082-02 TC-2 0245-6070-06 TC-6 0245-6082-03 TC-3 DISSENT SEAR 0245-6077-01 TC-1 0245-6083-01 TC-1 0245-6077-02 TC-2 0245-6083-02 TC-2 0245-6077-06 TC-6 0245-6083-10 TC-10 0245-6077-07 TC-7 0245-6083-11 TC-11 FCR-3 SABRE 0245-6068-01 TC-1 0245-6066-01 TC-1 0245-6068-02 TC-2 0245-6066-02 TC-2 0245-6068-05 TC-5 0245-6066-05 TC-5 0245-6068-06 TC-6 0245-6066-08 TC-8 GRANT 0245-6066-09 TC-9 0245-6073-01 TC-1 SALUTE 0245-6073-02 TC-2 0245-6078-02 TC-2 0245-6073-04 TC-4 SCIMITAR 0245-6073-05 TC-5 0245-6067-05 TC-5 GRANT 2 0245-6067-06 TC-6 0245-6088-01 TC-1 TAKA 0245-6088-03 TC-3 0245-6091-01 TC-1 HECTIC 0245-6091-04 TC-4 0245-6092-01 TC-1 TURMOIL 0245-6092-02 TC-2 0245-6089-01 TC-1 0245-6092-04 TC-4 0245-6089-02 TC-2 0245-6092-05 TC-5 0245-6089-08 TC-8 ILLUSION WERX 0245-6071-01 TC-1 0245-6079-01 TC-1 0245-6071-02 TC-2 0245-6079-02 TC-2 0245-6071-06 TC-6 0245-6079-04 TC-4 KDUB 0245-6079-05 TC-5 0245-6069-01 TC-1 0245-6079-08 TC-8 0245-6069-06 TC-6 0245-6069-09 TC-9

MISCELLANEOUS PARTS CHIN STRAP COVER SET CHEEK PAD 0245-3805-00 0245-4005-31 (SET) XXL MOUTHPIECE 0245-4005-35 (SET) XS-XL 0245-2101-01 Red 0245-4005-39 (SET) Optional 39mm 0245-2101-02 Blue CENTER PAD 0245-2101-05 Black 0245-4205-03 XS 0245-2101-06 Pure Orange 0245-4205-04 SML 0245-2101-07 Lt Silver 0245-4205-05 MED 0245-2101-09 White 0245-4205-06 LRG 0245-2101-13 Lumi Yellow 0245-4205-07 XLG 0245-2101-23 Br Yellow 0245-4205-08 XXL 0245-2101-35 Mt Black 0245-4305-03 (XS13) OPT 0245-2170-01 Chrome Red 0245-4305-04 (S13) OPT 0245-2170-02 Chrome Blue 0245-4305-05 (M13) OPT 0245-2101-04 Chrome Green 0245-4305-06 (L13) OPT 0245-2170-05 Chrome Black 0245-4305-07 (XL13) OPT 0245-2170-06 Chrome Orange TAIL FIN 0245-2170-13 Chrome Gold 0245-1805-00 Black MOUTHPIECE FILTER MUD GUARD 03-745 0245-1901-00 Red VISOR STICKER 0245-1902-00 Blue 0245-6305-00 0245-1905-00 Black CROSS VISOR SCREWS 0245-1909-00 White 0245-1015-00 Smoke 03-715 White 03-716 Black 03-717 Clear

toll free / 1-800-421-7247 online / www.helmethouse.com

DUAL SPORT & LEGACY OFF-ROAD HELMET ACCESSORIES HELMET MODEL

Hornet X2

HELMET MODEL

Hornet X2

VISORS & VISOR PARTS 0224-6001-05 Black 0224-6001-07 Lt Silver 0224-6001-09 White 0224-6001-35 Mt Black 0224-6001-37 Mt Deep Grey NAVIGATE 0224-6012-03 TC-3 0224-6012-05 TC-5 0224-6012-08 TC-8 SEEKER 0224-6011-01 TC-1 0224-6011-06 TC-6 0224-6011-08 TC-8 VISOR COVER 0224-6501-05 Black 0224-6501-07 Lt Silver 0224-6501-09 White 0224-6501-35 Mt Black 0224-6501-37 Mt Deep Grey VISOR TOP BASE 0224-6601-05 Black 0224-6601-07 Lt Silver 0224-6601-09 White 0224-6601-35 Mt Black 0224-6601-37 Mt Deep Grey VISOR SIDE BASE 0224-6801-05 Black VISOR VENT 0224-6401-05 Black VISOR SCREW 0224-0705-00 Set of 2

SHIELD COLOR SPECTRA SHIELD 0224-9407-00 Silver

Hornet DS

HELMET MODEL

Hornet DS

AERO VENTS FRONT INTAKE 0224-2005-00 Black 0224-2007-00 Silver 0224-2009-00 White 0224-2035-00 Mt Black 0224-2037-00 Mt Deep Grey LOWER INTAKE 0224-2105-00 Black 0224-2107-00 Silver 0224-2109-00 White 0224-2135-00 Mt Black 0224-2137-00 Mt Deep Grey TOP AIR OUTLET 0224-2305-00 Black 0224-2307-00 Silver 0224-2309-00 White 0224-2335-00 Mt Black 0224-2337-00 Mt Deep Grey

MISCELLANEOUS PARTS SHIELD LOCK 0224-1505-00 BREATH GUARD 0224-3505-00 CHIN STRAP COVER 0224-3805-00 EAR PAD 0209-4705-00 CHIN CURTAIN 0212-3705-00 QRSA SCREW 0213-0705-00 Set of 4 CNS-1 BASE PLATE 0218-0505-00 Set 0218-0605-00

PINLOCK SHIELDS & LENSES CNS-2 0224-9400-00 Clear 0224-9405-00 Dk Smoke EVO LENS 0224-9300-00

CENTER PAD 0224-4305-03 S5 XS, SM 0224-4305-05 M13 MD 0224-4305-06 L13 LG 0224-4305-07 XL13 XL-2XL 0224-4405-05 M5 MD 0224-4405-06 L5 LG

CHEEK PAD 0224-4005-31 31MM 0224-4005-35 35MM 0224-4005-39 39MM 0224-4005-43 43MM

C-49 0214-9400-00 Shield w/Pins Clear 0214-9300-00 Lens Insert Clear

03-760 2XS 03-761 XS 03-762 SM 03-763 MD 03-764 LG 03-765 XL 03-766 2XL

0214-4005-31 (31MM) 2XL 0214-4005-35 (35MM) XS,M,L,XL 0214-4005-39 (39MM) XXS 0214-4005-43 (43MM) OPT

DUAL SPORT VISORS 0214-6001-05 Blk 0214-6001-07 Lt Sil 0214-6001-29 Cr Wht 0214-6001-35 Mt Black 0214-6001-37 Mt Deep Gray

INTAKE/EXHAUST VENTS EXTRACTOR VENTS 03-776 Black 03-778 White FOREHEAD/INTAKE VENTS 03-735 White 03-736 Black

MISCELLANEOUS PARTS SHELL SIDE COVER (C-49) SMOKE PLUG 0214-0615-00 Smk 0214-0815-00 NOSE FILTER V-410 SCREW SET 0214-2805-00 0214-1100-00 Clr NOSE COVER QRSA SCREWS 0214-2105-00 Blk 0213-0705-00 CHIN CURTAIN BASE SET 0214-3505-00 0214-0505-00 DEFROSTER 0214-0905-00

SHOEI LEGACY OFF-ROAD HELMET PARTS HELMET MODEL

V-MT

VISORS 03-703 Chrome

MISCELLANEOUS PARTS CROSS MOUTHPIECE CHEEK PAD 03-713 Black 03-722 37MM OPT 03-714 Chrome 03-723 35MM XS/MD/LG/XL 03-743 Blk Chrome MUD GUARD 03-744 Red Chrome 0245-1905-00 MOUTHPIECE FILTER FOREHEAD/INTAKE VENT 03-745 03-735 White 03-736 Black

HELMET MODEL

VFX-DT

VFX-R AIR

MISCELLANEOUS PARTS EXTRACTOR VENTS CENTER PAD 03-776 Black 03-760 13MM XXS 03-778 White 03-761 9MM XS FOREHEAD VENTS 03-762 13MM S 03-767 Black 03-763 9MM M 03-768 White 03-764 9MM L 03-765 9MM XL 03-766 5MM XXL CHEEK PAD 03-771 39MM XXS/S NOSE COVERS 02-861 Chrome

toll free / 1-800-421-7247 online / www.helmethouse.com

FULL-FACE HELMET ACCESSORIES

HELMET MODEL

SHIELD COLOR CWR-F w/TEAR-OFF POSTS 0209-9500-00 Clear 0209-9503-00 Yellow 0209-9505-00 Dk Smoke DEFROSTER 0204-1705-00

PINLOCK® SHIELDS & LENSES CWR-F PINLOCK EVO LENS 0209-9300-00 Clear CWR-1 HARDCOAT with Pinlock® Pins 0209-9400-00 Clear 0209-9403-00 Hi-Def Yellow 0209-9405-00 Dark Smoke 0209-9406-00 Hi-Def Orange 0209-9415-00 Light Smoke 0209-9425-00 Mellow Smoke CWR-1 PINLOCK EVO LENS 0209-9800-00 Clear CWR-1 PHOTOCHROMIC 0209-9755-00

SPECTRA SHIELD CWR-1 SPECTRA with Pinlock® Pins 0209-9402-00 Blue 0209-9407-00 Chrome 0209-9413-00 Gold 0209-9416-00 Fire Orange

CENTER PAD 0204-4205-04 SM 0204-4205-05 MD 0204-4205-06 LG 0204-4205-07 XL 0204-4205-08 2XL TOP 0204-4305-09 S9 0204-4305-13 S13 0204-4306-09 L9 0204-4306-13 L13 FRONT 0204-4404-05 S5 0204-4404-09 S9 0204-4404-13 S13 0204-4406-05 L5 0204-4406-09 L9 0204-4406-13 L13 REAR 0204-4504-05 S5 0204-4504-09 S9 0204-4504-13 S13 0204-4506-05 L5 0204-4506-09 L9 0204-4506-13 L13 SIDE 0204-4604-05 S5 0204-4604-09 S9 0204-4604-13 S13 0204-4606-05 L5 0204-4606-09 L9 0204-4606-13 L13

CHEEK/NECK/EAR PADS 0204-4005-31 (31MM) 0204-4005-35 (35MM) 0204-4005-39 (39MM) 0204-4005-43 (43MM) NECK PAD 0204-4904-09 S9 0204-4904-13 S13 0204-4905-09 M9 0204-4905-13 M13 0204-4906-09 L9 0204-4906-13 L13 0204-4907-09 XL9 0204-4907-13 XL13

X-Twelve

CW-1 HARDCOAT 0213-9103-00 Hi Def Yellow 0213-9106-00 Hi Def Orange 0213-9115-00 Lt Smoke 0213-9150-00 Half-Tint PINLOCK SHIELDS CWF-1 w/TEAR-OFF POSTS 0213-9500-00 Clear 0213-9503-00 Hi Def Yellow 0213-9505-00 Dk Smoke CWF-1 SHIELD TEAR-OFF 0213-9900-00 (5 Pack)

CW-1 PINLOCK EVO LENS 0209-9800-00 Clear CW-1 PINLOCK SHIELD 0213-9400-00 Clear 0213-9403-00 Hi Def Yellow 0213-9405-00 Dk Smoke 0213-9415-00 Lt Smoke

CW-1 SPECTRA 0213-9402-00 Blue 0213-9407-00 Chrome 0213-9413-00 Gold 0213-9416-00 Fire Orange

0212-4205-03 XS 0212-4205-04 SM 0212-4205-05 MD 0212-4205-06 LG 0212-4205-07 XL 0212-4205-08 2XL

0212-4005-31 (31MM) OPT 0212-4005-35 (35MM) XS 0212-4005-35 (35MM) SM 0212-4005-35 (35MM) MD 0212-4005-35 (35MM) LG 0212-4005-35 (35MM) XL 0212-4005-35 (35MM) 2XL 0212-4005-39 (39MM) OPT 0212-4005-43 (43MM) OPT

X-Eleven

CX-1V HARDCOAT 01-422 Half Tone Smoke CF-1V w/TEAR-OFF POSTS 01-415 Clear

CX-1V 01-513 Lens Insert Dk Smoke 01-514 Lens Insert Lt Smoke 01-520 EVO Lens Insert Clear

QSV-1 SUN VISOR 0217-9003-00 Hi-Def Yellow 0217-9005-00 Smoke

CNS-1 PINLOCK SHIELD 0217-9100-00 Clear Only (w/Pins) CNS-1 PINLOCK EVO LENS 0209-9800-00 Clear Only

0218-4205-03 XS 0218-4205-04 SM 0218-4205-05 MD 0218-4205-06 LG 0218-4205-07 XL 0218-4205-08 2XL 0218-4305-05 (M13) OPT 0218-4305-06 (L13) OPT 0218-4305-07 (XL13) OPT 0218-4405-04 (S5) OPT 0218-4405-05 (M5) OPT 0218-4405-06 (L5) OPT

0218-4005-31 (31MM) 0218-4005-35 (35MM) 0218-4005-39 (39MM) 0218-4005-43 (43MM)

X-Fourteen

GT-Air

EAR PADS 0217-4705-00 Set

toll free / 1-800-421-7247 online / www.helmethouse.com

STREET AND DUAL SPORT HELMET ACCESSORIES HELMET MODEL

RF-1200

RF-1100 Qwest

SHIELD COLOR

RF-SR

NEOTEC

NEOTEC II

PINLOCK SHIELDS & LENSES CWR-1 HARDCOAT with Pinlock® Pins 0209-9400-00 Clear 0209-9403-00 Hi-Def Yellow 0209-9405-00 Dark Smoke 0209-9406-00 Hi-Def Orange 0209-9415-00 Light Smoke 0209-9425-00 Mellow Smoke CWR-1 PINLOCK EVO LENS 0209-9800-00 Clear CWR-1 PHOTOCHROMIC 0209-9755-00 CW-1 PINLOCK EVO LENS 0209-9800-00 Clear CWF-1 PINLOCK EVO LENS 0213-9300-00 Clear CW-1 PINLOCK SHIELD 0213-9400-00 Clear 0213-9403-00 Hi Def Yellow 0213-9405-00 Dk Smoke 0213-9415-00 Lt Smoke

CWR-1 HARDCOAT with Pinlock® Pins 0209-9400-00 Clear 0209-9403-00 Hi-Def Yellow 0209-9405-00 Dark Smoke 0209-9406-00 Hi-Def Orange 0209-9415-00 Light Smoke 0209-9425-00 Mellow Smoke CWR-1 PINLOCK EVO LENS 0209-9800-00 Clear

QSV-1 SUN VISOR 0217-9003-00 Hi-Def Yellow 0217-9005-00 Smoke

CNS-1 0217-9100-00 CNS-1 Shield w/Pins (Clear Only) 0209-9800-00 Lens Insert (Clear Only)

CNS-3 PINLOCK SHIELD 0216-9100-00 Clear 0209-9800-00 Lens Insert (Clear Only)

SPECTRA SHIELD CWR-1 SPECTRA with Pinlock® Pins 0209-9402-00 Blue 0209-9407-00 Chrome 0209-9413-00 Gold 0209-9416-00 Fire Orng

CENTER PAD 0209-4205-03 (S13) XS 0209-4205-04 (S9) SM 0209-4205-05 (M9) MD 0209-4205-06 (L9) LG 0209-4205-07 (XL9) XL 0209-4205-08 (XL5) 2XL 0209-4305-02 (S17 OPT) 2XS 0209-4305-04 (S5 OPT) SM 0209-4305-05 (M13 OPT) MD 0209-4305-06 (L13 OPT) LG 0209-4305-07 (XL13 OPT) XL 0209-4405-05 (M5 OPT II) MD 0209-4405-06 (L5 OPT II) LG 0213-9402-00 Blue 0213-4205-02 2XS 0213-9407-00 Chrome 0213-4205-03 XS 0213-9413-00 Gold 0213-4205-04 SM 0213-9416-00 Fire Orng 0213-4205-05 MD 0213-4205-06 LG 0213-4205-07 XL 0213-4205-08 2XL 0213-4205-09 3XL 0213-4305-04 (S13) 0213-4305-05 (M13) 0213-4305-06 (L13) 0213-4305-07 (XL13) 0213-4305-08 (2XL13) CWR-1 SPECTRA 0207-4204-05 (S5) with Pinlock® Pins 0207-4204-09 (S9) 0209-9402-00 Blue 0207-4204-13 (S13) 0209-9407-00 Chrome 0207-4204-17 (S17) 0209-9413-00 Gold 0207-4205-05 (M5) 0209-9416-00 Fire Orng 0207-4205-09 (M9) 0207-4205-13 (M13) 0207-4206-05 (L5) 0207-4206-09 (L9) 0207-4206-13 (L13) 0207-4207-05 (XL5) 0207-4207-09 (XL9) 0207-4207-13 (XL13)

CHEEK PADS & MISC 0209-4005-31 (31mm) 2XL 0209-4005-35 (35mm) S-XL 0209-4005-39 (39mm) XS 0209-4005-43 (43mm) (OPT) EAR PADS 0209-4705-00 Set QR-E BASE PLATE 0209-0505-00 Full Set QR-E BASE PLATES 0209-0605-00 Right & Left CHIN STRAP COVER 0209-3805-05 Set 0213-4005-31 (31MM) 2XL 0213-4005-33 (33MM) OPT 0213-4005-35 (35MM) XS-XL 0213-4005-37 (37MM) OPT 0213-4005-39 (39MM) 2XS 0213-4005-41 (41MM) OPT

0207-4005-31 (31MM) 0207-4005-35 (35MM) 0207-4005-39 (39MM) 0207-4005-43 (43MM) QR-E BASE PLATE 0209-0505-00 Full Set 0209-0605-00 Right & Left 0213-0705-00 Screw Set (4) EAR PADS 0217-4705-00 DEFROSTER 0207-0905-00

CHIN STRAP COVER 0207-3805-00 0217-4205-03 XS 0217-4005-31 (31mm) (OPT) 2XL 0217-4205-04 SM 0217-4005-35 (35mm) XS-XL 0217-4205-05 MD 0217-4005-39 (39mm) (OPT) 0217-4205-06 LG 0217-4205-07 XL-2XL EAR PADS 0217-4705-00 0217-4305-03 (OPT) 13mm XS 0217-4305-04 (OPT) 13mm SM 0217-4305-05 (OPT) 13mm MD 0217-4305-06 (OPT) 13mm LG 0217-4305-07 (OPT) 13mm XL-2XL 0217-4405-03 (XS5) OPT 0217-4405-04 (S5) OPT 0217-4405-05 (M5) OPT 0217-4405-06 (L5) OPT 0217-4405-07 (XL5) OPT 0216-4205-03 (XS9) WITHOUT NOISE ISOLATOR 0216-4205-04 (S9) 0216-4006-31 (31mm) 0216-4205-05 (M9) 0216-4006-35 (35mm) 0216-4205-06 (L9) 0216-4006-39 (39mm) 0216-4205-07 (XL9) WITH NOISE ISOLATOR 0216-4205-08 (XL5) 0216-4005-31 (31mm) 0216-4305-03 (XS5) 0216-4005-35 (35mm) 0216-4305-04 (S5) 0216-4005-39 (39mm) 0216-4305-05 (M5) 0216-4305-06 (L5) CHIN CURTAIN 0216-4405-03 (XS13) 0216-3705-00 (I - Mesh) 0216-4405-04 (S13) 0216-3905-00 (H - Leather) 0216-4405-05 (M13) 0216-4405-06 (L13) CHIN STRAP COVER 0216-4405-07 (XL13) 0216-3805-00 BATTERY SPACE CVR 0216-5105-00 INTERCOM BASE CVR 0216-5205-00 ©2018 Helmet House, Inc

HELMET REPLACEMENT PARTS AND ACCESSORIES

HELMET MODEL

RF-1000 TZ-R

Multitec RF-800 Syncrotec X-SP II, TZ-1 RF-900, Z-II J-Wing J-Cruise

SHIELD COLOR CX-1V HARDCOAT 01-422 Half Tone Smoke CF-1V w/TEAR-OFF POSTS 01-415 Clear CX-1V HARDCOAT 01-422 Half Tone Smoke CF-1V w/TEAR-OFF POSTS 01-415 Clear

PINLOCK SHIELDS & LENSES CX-1V 01-513 Lens Insert Dk Smoke 01-514 Lens Insert Lt Smoke 01-520 Lens Insert Clear CX-1V 01-513 Lens Insert Dk Smoke 01-514 Lens Insert Lt Smoke 01-520 Lens Insert Clear

CX-1 HARDCOAT 01-335 Mellow Smoke

CX-1 01-511 CX-1 Shield w/Pins Clear 01-513 Lens Insert Dk Smoke 01-514 Lens Insert Lt Smoke 01-520 Lens Insert Clear

CJ-1 HARDCOAT 01-201 Clear 01-202 Lt Smoke 01-204 Dk Smoke

CENTER PAD

01-218 (31mm) 2XL 01-219 (33mm) OPT 01-220 (35mm) XS/SM/MD/LG 01-221 (37mm) OPT 01-222 (39mm) 2XS/SM 01-223 (41mm) OPT

01-211 XS13 01-215 L9 01-212 XS9 01-216 XL9 01-213 M13 01-217 XL5 01-214 M9

QSV-1 SUN VISOR 0217-9003-00 Hi-Def Yellow 0217-9005-00 Smoke CJ-2SP SHIELD 0230-9400-00 Clear

CJ-2 0230-9100-00 CJ-2 Shield w/Pins (Clear Only) 0230-9800-00 Lens Insert (Clear Only) CJ-2/CJ-2SP PINLOCK LENS 0230-9800-00 Clear

CHEEK PADS & MISC

0230-4205-03 XS 0230-4205-04 SM 0230-4205-05 MD 0230-4205-06 LG 0230-4205-07 XL 0230-4205-08 2XL 0230-4305-05 (M13) OPT 0230-4305-06 (L13) OPT 0230-4305-07 (XL13) OPT 0230-4405-04 (S5) OPT 0230-4405-05 (M5) OPT 0230-4405-06 (L5) OPT

01-218 (31MM) 2XL/3XL 01-219 (33MM) OPT 01-220 (35MM) XS/MD/LG/XL 01-221 (37MM) OPT 01-222 (39MM) 2XS/SM 01-223 (41MM) OPT 0230-4005-31 (31MM) 0230-4005-35 (35MM) 0230-4005-39 (39MM) 0230-4005-43 (43MM) EAR PADS 0217-4705-00 V-440 VISOR 0230-6001-05 Black 0230-6001-09 White

HALF- and OPEN-FACE HELMET REPLACEMENT PARTS HELMET MODEL

RJ-Air RJ-Air Platinum RJ Platinum-R

ST-Cruz ST-LE

VISOR 01-350 Black (Open Road)

TOP VENT FOREHEAD VENTS 03-735 White 03-736 Black

01-349

FOREHEAD VENTS 03-767 Black 03-768 White

01-350 Black (Open Road) 03-898 Black Patent Leather

EAR COVER

MISC

Chin Strap Cover 02-928

Up to 9/06 01-346 XS-MD 01-348 LG-2XL From 10/06 On 01-356 XS-MD 01-357 LG-2XL

CENTER PAD

01-208 LG 01-209 XL 01-210 2XL* 01-211 XS13 01-212 XS9 01-213 M13 01-214 M9 01-215 L9 01-216 XL9 01-217 XL5 *Snell 2010 Sizing

CHEEK PAD

01-218 (31MM) 3XL 01-219 (33MM) OPT 01-220 (35MM) XS/XL/2XL 01-221 (37MM) OPT 01-222 (39MM) SM/MD/LG 01-223 (41MM) OPT

toll free / 1-800-421-7247 online / www.helmethouse.com

STREET AND DUAL-SPORT HELMET ACCESSORIES SHOEI HELMET MODEL

X-Fourteen

BASE PLATE

CHIN STRAP COVER AIR INTAKE 0209-0605-00 0209-0505-00 0204-3805-00 UPPER 0204-2005-00 Black 0204-2009-00 White 0204-2035-00 Mt Black 0204-2011-01 Assail TC-1 0204-2011-02 Assail TC-2 0204-2011-10 Assail TC-10 0204-2012-01 Marquez4 TC-1 0204-2013-01 Bradley3 TC-1 0204-2018-01 Marq. Motegi2 TC-1 LOWER 0204-2105-00 Black 0204-2109-00 White 0204-2135-00 Mt Black 0204-2149-00 L. White FRONT 0204-2405-00 Black 0204-2409-00 White 0204-2435-00 Mt Black 0204-2441-00 L. Red FULL SET

0213-0505-00 X-Twelve 0213-0605-00 0213-0705-00 Screws

RF-SR GT-Air

J-Cruise

0212-3805-00 AIR SCOOP 3 0212-2005-00 Black 0212-2008-02 Streamliner TC-2 0212-2010-03 Elias 2 TC-3 0212-2011-08 B-Boz TC-8 0212-2013-02 Kiyonari TC-2 0212-2013-05 Kiyonari TC-5 0212-2012-05 Kagayama TC-5 0212-2018-01 Bautista TC-1 0212-2018-02 Bautista TC-2 0212-2019-02 Reverb TC-2 0212-2020-02 Laseca TC-2 0212-2020-04 Laseca TC-4 0212-2023-01 Daijiro TC-1 0212-2023-03 Daijiro TC-3 0212-2023-06 Daijiro TC-6 0212-2024-02 Montmelo TC-2 0212-2025-02 Kagayama4 TC-2 0212-2025-05 Kagayama4 TC-5 0212-2026-01 Motegi Marquez TC-1 0212-2027-01 Trajectory TC-1 0212-2027-02 Trajectory TC-2 0212-2027-05 Trajectory TC-5 FRONT 0212-2105-00 Black

UPPER 0207-2005-00 Black LOWER 0207-2105-00 Black 0218-0605-00 0218-0505-00 0218-3805-05 UPPER 0213-0705-00 0218-2005-00 Black 0218-2007-00 Lt Silver QRSA Screws 0218-2009-00 White 0218-2017-00 Anthracite 0218-2023-00 Bril. Yellow 0218-2031-00 Shine Red 0218-2035-00 Mt Black 0218-2041-00 Red 0218-2042-00 Blue 0218-2047-00 Gray 0218-2095-00 White/Smoke 0230-0605-00 0230-0505-00 0230-3805-00 UPPER QRSA Set 0230-2005-00 Black 0230-2009-00 White 0213-0705-00 0230-2011-00 Wine QRSA Screws 0230-2017-00 Anthracite 0230-2023-00 Br Yel 0230-2035-00 Mt Black 0230-2037-00 M/D Gry

AERO VENTS SIDE AIR OUTLET 0204-2207-00 (1 each) TOP AIR OUTLET 0204-2307-00 (1 each) LOWER AIR SPOILER 0204-3905-00 REAR STABILIZER 0204-2605-00 Black 0204-2609-00 White 0204-2635-00 Mt Black 0204-2611-01 Assail TC-1 0204-2611-02 Assail TC-2 0204-2611-10 Assail TC-10 0204-2612-01 Marquez4 TC-1 0204-2613-01 Bradley3 TC-1 0204-2618-01 Marq. Motegi2 TC-1 REAR FLAP 0204-2807-00 Narrow 0204-2907-00 Wide

BREATH GUARD/ CHIN CURTAIN 0204-3505-00 Breath 0204-4705-00 EarPad 0212-3705-00 Chin Ctn

SIDE AIR OUTLET 0212-2205-00 Black 0212-2215-00 Smoke TOP AIR OUTLET 0212-2305-00 Black 0212-2308-02 Streamliner TC-2 0212-2310-03 Elias 2 TC-3 0212-2318-01 Bautista TC-1 0212-2318-02 Bautista TC-2 0212-2319-02 Reverb TC-2 0212-2320-02 Laseca TC-2 0212-2320-04 Laseca TC-4 0212-2323-01 Daijiro TC-1 0212-2323-03 Daijiro TC-3 0212-2323-06 Daijiro TC-6 0212-2324-02 Montmelo TC-2 0212-2325-02 Kagayama4 TC-2 0212-2325-05 Kagayama4 TC-5 0212-2326-01 Motegi Marquez TC-1 0212-2327-01 Trajectory TC-1 0212-2327-02 Trajectory TC-2 0212-2327-05 Trajectory TC-5 AERO EDGE SPOILER 2 0212-2405-00 Black 0212-2408-02 Streamliner TC-2 0212-2410-03 Elias 2 TC-3 0212-2411-08 B-Boz TC-8 0212-2413-02 Kiyonari TC-2 0212-2418-01 Bautista TC-1 0212-2418-02 Bautista TC-2 0212-2419-02 Reverb TC-2 0212-2420-02 Laseca TC-2 0212-2420-04 Laseca TC-4 0212-2423-01 Daijiro TC-1 0212-2423-03 Daijiro TC-3 0212-2423-06 Daijiro TC-6 0212-2424-02 Montmelo TC-2 0212-2425-02 Kagayama4 TC-2 0212-2425-05 Kagayama4 TC-5 0212-2426-01 Motegi Marquez TC-1 0212-2427-01 Trajectory TC-1 0212-2427-02 Trajectory TC-2 0212-2427-05 Trajectory TC-5 TOP AIR OUTLET 0207-2205-00 Black

0212-3505-00 Breath 0212-3705-00 Chin Ctn

TOP AIR OUTLET 0218-2305-00 Black 0218-2307-00 Lt Silver 0218-2309-00 White 0218-2317-00 Anthracite 0218-2323-00 Bril. Yellow 0218-2331-00 Shine Red 0218-2335-00 Mt Black 0218-2355-00 Black/Black 0218-2359-00 White/Black 0218-2395-00 White/Smoke

0213-3505-00 Breath 0218-3705-00 Chin Ctn

0213-3505-00 Breath 0212-3705-00 Chin Ctn

TOP AIR OUTLET 0230-2305-00 Black 0230-2309-00 White 0230-2311-00 Wine 0230-2317-00 Anth 0230-2323-00 Br Yel 0230-2335-00 Mt Black 0230-2337-00 M/D Gry

HELMET REPLACEMENT PARTS AND ACCESSORIES

SHOEI HELMET MODEL

Multitec

BASE PLATE

FULL SET 01-250

X-Eleven Neotec

CHIN STRAP COVER 02-928

0217-3805-00

Qwest 0213-0605-00 0213-0705-00

0213-0505-00

0215-3805-00

RF-1200 0209-0605-00 0213-0705-00

0209-0505-00

0209-3805-05

RF-1100 0213-0605-00 0213-0705-00 Screws

0213-0505-00

0213-3805-05

QRSA Screws

RF-1000

TZ-R Base Set J-Wing 01-300 01-301 Screws XSP II

AIR INTAKE UPPER 01-260 Black

AIR SCOOP 2 01-436 Black UPPER 0217-2005-00 Black 0217-2007-00 Lt Sil 0217-2009-00 White 0217-2011-00 Wine 0217-2017-00 Anth 0217-2023-00 Br Yel 0217-2035-00 MtBlack 0217-2037-00 M/D Gry LOWER 0217-2105-00 Black 0217-2107-00 Lt Sil 0217-2109-00 White 0217-2111-00 Wine 0217-2117-00 Anth 0217-2123-00 Br Yel 0217-2135-00 MtBlack 0217-2137-00 M/D Gry DEFROSTER 0217-0905-00 UPPER 0215-2005-00 Black 0215-2007-00 Lt Silver 0215-2009-00 White 0215-2017-00 Anth 0215-2023-00 Br Yel 0215-2035-00 Mt Black 0215-2037-00 M/D Gry LOWER 0215-2105-00 Black 0215-2107-00 Lt Silver 0215-2109-00 White 0215-2117-00 Anth 0215-2123-00 Br Yel 0215-2135-00 Mt Black 0215-2137-00 M/D Gry LOWER 0209-2105-00 Black 0209-2135-00 Mt Black UPPER 0209-2005-00 Black 0209-2035-00 Mt Black FRONT 0209-2405-00 Black 0209-2435-00 Mt Black UPPER 0213-2005-00 Black 0213-2015-00 Smoke 0213-2035-00 Mt Black LOWER 0213-2105-00 Black 0213-2135-00 Mt Black

AERO BREATH GUARD/ VENTS CHIN CURTAIN FACE COVER PARTS 01-253 Chin 01-254 Face Cover Base Set 01-255 Face Cover Screw 01-256 Screw Cover 01-432 Defroster TOP AIR OUTLET 0217-2305-00 Black 0217-2307-00 Lt Silver 0217-2309-00 White 0217-2311-00 Wine 0217-2317-00 Anthracite 0217-2323-00 Br Yellow 0217-2335-00 Mt Black 0217-2337-00 M/D Gry

0213-3505-00 Breath 0217-3605-00 Chin Curtain Base 0217-3705-00 Chin Curtain

TOP VENT 0215-2205-00 Black 0215-2209-00 White

0213-3505-00 Breath 0212-3705-00 Chin

TOP AIR OUTLET 0209-2205-00 Black 0209-2215-00 Smoke 0209-2235-00 Mt Black

0213-3505-00 Breath 0212-3705-00 Chin

TOP AIR OUTLET 0213-2205-00 Black 0213-2215-00 Smoke 0213-2235-00 Mt Black

0213-3505-00 Breath 0212-3705-00 Chin

02-928

02-928 01-303 02-928

toll free / 1-800-421-7247 online / www.helmethouse.com

HELMET SIZING GUIDE FULL-FACE HELMET SIZING GUIDE SIZE SHELL LINER CENTER PAD MASK LINER Standard CHEEK PADS Optional

XS S13

X-FOURTEEN S

S S

S9 S 35mm 39/31

39mm 43/35/31

NOTE: Optional 43mm cheek pad available

SIZE SHELL EPS LINER CHEEK PAD CENTER PAD

XS 39 S13

CHEEK PAD OPTIONS SIZE SHELL EPS LINER CHEEK PAD CENTER PAD CHEEK PAD OPTIONS SIZE SHELL EPS LINER CHEEK PAD CENTER PAD

S M

M M M M9

L L L L9

35mm 39/31

GT-AIR

XL XL9 L 35mm 39/31

XL XL

2XL XL5 31mm 39/35

L XL L XL S M L XL 35 35 35 35 S9 M9 L9 XL9 31mm, 39mm, 43mm/ALL SIZES OF CHEEK PADS INTERCHANGEABLE IN ALL HELMET SIZES

2XL 31 XL5

RF-1200

M L XL 2XL M L XL M L XL 39 35 35 35 35 31 S13 S9 M9 L9 XL9 XL5 31mm, 35mm, 39mm, 43mm/ALL SIZES OF CHEEK PADS INTERCHANGEABLE IN ALL HELMET SIZES XS 39 S13

S S

RF-SR

M L XL M L XL M L XL 35 35 35 35 S9 M9 L9 XL9 31mm, 35mm, 39mm, 43mm/ALL SIZES OF CHEEK PADS INTERCHANGEABLE IN ALL HELMET SIZES

S S

CHEEK PAD OPTIONS

RF-1100

SIZE SHELL EPS LINER CHEEK PAD CENTER PAD

2XL 31 XL5

XS XS XS 35mm XS9

NEOTEC II

S S 35mm S9

M M M

L L L

35mm M9

35mm L9

XL L

35mm XL9

XL XL

2XL

31mm XL5

Continued on Following Page

HELMET SIZING GUIDE

OPEN-FACE and HALF-HELMET SIZING GUIDE SIZE SHELL EPS LINER CHEEK PAD CENTER PAD

XS 39mm S13

CHEEK PAD OPTIONS

SIZE SHELL EPS LINER CHEEK PAD CENTER PAD

J-CRUISE

M L XL 2XL S M L XL S M L XL 35mm 35mm 35mm 35mm 31mm S9 M9 L9 XL9 XL5 31mm, 39mm/ALL SIZES OF CHEEK PADS INTERCHANGEABLE IN ALL HELMET SIZES

RJ PLATINUM-R

M L XL 2XL 3XL L XL 3XL M L XL 2XL 39mm 39mm 39mm 35mm 35mm 31mm M13 M9 / L13* L9 / XL13* XL5 / XL9* 2XL9 2XL5 33mm, 37mm, 41mm/ALL SIZES OF CHEEK PADS INTERCHANGEABLE IN ALL HELMET SIZES (*2010 Snell Sizing)

XS 35mm XS9

CHEEK PAD OPTIONS

DUAL SPORT HELMET SIZING GUIDE SIZE SHELL EPS LINER CHEEK MASK LINER CENTER PAD CHEEK PAD (Standard) CHEEK PAD (Optional)

HORNET X2 S S

M M M

L L L

XL XL

2XL

M L S13 S9 M9 L9 XL9 XL5 39mm 35mm 35mm 35mm 35mm 31mm 31mm, 35mm, 39mm, 43mm/ALL SIZES OF CHEEK PADS INTERCHANGEABLE IN ALL HELMET SIZES

OFF-ROAD HELMET SIZING GUIDE SIZE SHELL EPS LINER CENTER PAD (Standard) CHEEK PAD (Standard

S13 39mm

VFX-EVO

S S

CHEEK PAD OPTIONS

M L XL 2XL M L XL M L XL S9 M9 L9 XL9 XL5 35mm 35mm 35mm 35mm 31mm ALL SIZES OF CHEEK PADS INTERCHANGEABLE IN ALL HELMET SIZES

toll free / 1-800-421-7247 online / www.helmethouse.com

SHOEI CASUAL WEAR SHOEI LOGO HOODY BLUE MSRP

$59.99

Sizes

Blue

Black

M L XL 2XL 3XL

0411-2302-05 0411-2302-06 0411-2302-07 0411-2302-08 0411-2302-09

— 0411-2305-06 0411-2305-07 0411-2305-08 0411-2305-09

SHOEI LOGO TEE MSRP

$21.99

BLACK

Sizes

Blue

Black

M L XL 2XL 3XL

0411-0102-05 0411-0102-06 0411-0102-07 0411-0102-08 0411-0102-09

— 0411-0105-06 0411-0105-07 0411-0105-08 0411-0105-09

SHOEI SPEED

SHOEI CHECKER TEE SHIRT

MSRP

$23.99

Sizes

Black

White

M L XL 2XL 3XL

0411-0705-05 0411-0705-06 0411-0705-07 0411-0705-08 0411-0705-09

0411-0709-05 0411-0709-06 0411-0709-07 0411-0709-08 0411-0709-09

LONG SLEEVE TEE SHIRT Sizes MSRP

$26.99

MSRP

$29.99

Black

S/M M/L L/XL

0411-5805-04 0411-5805-05 0411-5805-06

MSRP

BEANIE CAP BLACK

One size fits most 0411-5205-00

0411-0509-06 0411-0509-07

BLACK

$7.99

SHOEI LOGO

L XL

White

SHOEI FULL HEAD LINER

NEW ERA PINSTRIPE HAT Sizes

BLUE

part# 0411-5405-00

toll free / 1-800-421-7247 online / www.helmethouse.com

MSRP

ACCESSORIES

SHOEI BACKPACK 2.0 • Interior laptop compartment fits most 17” laptops/tablets • Padded panels keep your electronics safe from impact • The main compartment fits your favorite SHOEI hat, extra layers, and swag from the races • Removable shield holder fits most SHOEI helmet shields • Adjustable, padded shoulder straps keep the wearer comfortable on and off the motorcycle • Hidden three-point buckle and flap system can cradle your SHOEI helmet while walking around • Padded back panels keep the wearer comf ortable on and off the motorcycle • Side pockets with stretch netting can store your beverage • An organizational bellows pocket can expand to hold all of your essentials like keys, pens, an iPod, etc. • Soft, lined media pockets inside the main compartment and a media port at the top make listening to your media player easy • An adjustable waist strap and chest strap helps to keep the bag fitting snug • Reflective piping on the backside and shoulder straps help keep you visible at night

MSRP

$99.99

BACKPACK 2.0 Part# 0412-0105-00

Side Pockets With Stretch Netting

Adjustable Padded Shoulder Straps

Padded Inner Panels Keep Contents Safe

Three-Point Buckle and Flap System Cradles Your Helmet When It’s Off

toll free / 1-800-421-7247 Top Loading Main Compartment

Helmet Shield Case Included