LED Solutions 2017 | Helvar LED components catalogue by Helvar

LED Solutions 2017

ABOUT HELVAR Helvar are independent specialists in intelligent and energy efficient lighting solutions. Our extensive range of products, including lighting controls and luminaire components, can be used as single components or combined into lighting systems to achieve smart solutions. These solutions allow our customers to deliver not only vastly improved energy efficiency but enhanced human comfort, mood and productivity with lighting.

LED DRIVERS Helvar LED driver offering is designed for energy efficient, long lasting, high quality, professional lighting applications. Including a wide range of switchable and dimmable LED drivers, they can be used as part of a simple standalone lighting system or bigger building management systems.

LED MODULES Helvar LED modules help luminaire manufacturers achieve a successful transition across to smart energy efficient LED lighting solutions. Helvar offers a comprehensive range of LED modules supporting linear, downlight, square and rectangular luminaire applications. Combined with Helvarâ&#x20AC;&#x2122;s LED drivers and Lighting Controls they provide maximum energy efficiency, high-quality lighting and user comfort.

TUNABLE WHITE LINEAR LED DRIVERS DIMMABLE DALI & 1-10 V

4 8-23 8

SELV60 SELV120 NON-ISOLATED NON-DIMMABLE CONSTANT CURRENT

SELV60 NON-ISOLATED BASIC ISOLATED

COMPACT LED DRIVERS DIMMABLE DALI & 1-10 V

23-37 23

SELV60 SELV120 NON-DIMMABLE CONSTANT CURRENT

SELV60 SELV120

OUTDOOR & COATED DRIVERS CONSTANT VOLTAGE DRIVERS CLICK-ON STRAIN RELIEFS LED MODULES SMART LUMINAIRE SOLUTIONS TOOLS & SOFTWARE LED GLOSSARY & SWITCH-CONTROL USER GUIDE DRIVER COMPARISON TABLES

38 42 47 48 50 54 55 58

TUNABLE WHITE

HELVAR INTELLIGENT COLOUR SERIES TUNABLE WHITE Helvar’s iC range introduces easy colour control enabled by DALI Type 8 commands. WHY DO WE NEED TUNABLE WHITE? Tunable White products help you mix warm and cool white light and light intensity so that you can mimic outdoor lighting conditions (where morning light has different colour and intensity than midday light). This promotes feelings of well-being and productivity for people who spend big part of their day indoors in artificial light, e.g. office workers, school students, hospital patients, etc.

WHAT BENEFITS DOES DALI COLOUR CONTROL BRING? DALI’s new Colour control standard enables you to pick a scene of colour and intensity in one easy step, vastly decreasing programming time. This new standard only needs one DALI address, which greatly reduces the cost of a DALI lighting system. The DALI Device type 8 (Dt8) commands enable us to control two or more output channels by one common address.

HELVAR’S iC DALI DRIVERS The new Helvar iC DALI Drivers have been developed specifically for dimming and tuning the white colour. The drivers are among the first ones available in the market responding to Dt8 commands. The two driver output channels are connected to two modules with different colour temperatures, warm white and cold white which are then controlled by using only one address.

The total power of the drivers can be divided between the two output channels in any proportion. The current output can be set between 350 mA and 700 mA, with a current setting resistor.

HELVAR'S iC LED MODULE Our linear L-iC LED modules have two individual LED channels that provide a dynamic colour temperature range from 2 700 to 6 500 K when operated with a Tunable White LED driver. The range has been designed to match Zhaga 24 mm dimensions with two available lengths: 260 cm and 560 cm.

ILLUSTRIS - STYLISH, FEATURE RICH USER INTERFACE ILLUSTRIS® is a contemporary user interface with advanced lighting control features. Its sleek design incorporates touch sensitive technology to provide an intuitive and familiar user experience. Integrated Bluetooth® connectivity expands the control possibilities to smartphones and tablets via the SceneSet® app for iOS and Android.

www.helvar.com/tunablewhite

Helvar | Data is subject to change without notice. More information at: www.helvar.com

TUNABLE WHITE Rogers Stirk Harbour + Partners / James Newton Phtographs

60/2 W DALI DIMMABLE LED DRIVER LL60/2-E-DA-iC • 1% - 100 % stepless dimming range per channel • Two independent SELV rated output channels • DALI device type 8 software for Tunable White • Switch-Control for intensity and colour control • Protected up to 4 kV power network fast transients • Suitable for emergency use • Helvar Driver Configurator support

Control

DALI, Tunable White

Max. output power

60 W

Output

Adjustable Current

Output current

350 mA (default) – 700 mA

Output protection

SELV120

Luminaire class

I, II, III

Driver type

Indoor, Linear

Lifetime up to

100000 h

Helvar | Data is subject to change without notice. More information at: www.helvar.com

TUNABLE WHITE

35/2 W DALI DIMMABLE LED DRIVER LC35/2-DA-iC • 0.2 % - 100 % stepless dimming range per channel • Two independent SELV rated output channels • DALI device type 8 software for Tunable White • Hybrid dimming technique for high quality light • Switch-Control for intensity and colour control • Protected up to 4 kV power network fast transients • Suitable for emergency use • Helvar Driver Configurator support • Optional strain relief for independent use (LC1x70-SR)

Control

DALI, Tunable White

Max. output power

35 W

Output

Adjustable Current

Output current

350 mA (default) – 700 mA

Output protection

SELV60

Luminaire class

I, II, III

Driver type

Indoor, Compact

Lifetime up to

100000 h

35/2 W DALI DIMMABLE LED DRIVER LL35/2-E-DA-iC • 1% - 100 % stepless dimming range per channel • Two independent SELV rated output channels • DALI device type 8 software for Tunable White • Switch-Control for intensity and colour control • Protected up to 4 kV power network fast transients • Suitable for emergency use • Helvar Driver Configurator support

Control

DALI, Tunable White

Max. output power

35 W

Output

Adjustable Current

Output current

350 mA (default) – 700 mA

Output protection

SELV120

Luminaire class

I, II, III

Driver type

Indoor, Linear

Lifetime up to

100000 h

Helvar | Data is subject to change without notice. More information at: www.helvar.com

TUNABLE WHITE

ILLUSTRIS® USER INTERFACE FOR TUNABLE WHITE 19x / 29x • Works standalone or part of a Networked system • Minimal setup / out-of-box operation • Capable of creating, storing and recalling 4 lighting scenes • Intuitive touch sensitive control with haptic feedback • DALI Type 6 and Type 8 (colour) compatible • Two part construction • Available in a variety of front fascias for different controls • Glass and plastic front fascia finishes • Integrated Bluetooth® connectivity • App control via SceneSet mobile app (iOS and Android) • Designed to fit UK, DIN and similar back boxes • See more at www.helvar.com/illustris

L-IC SERIES TUNABLE WHITE LED MODULES L-iC-262 & L-iC-562 • Tunable White module, adjustable colour temperature 2700 K to 6500 K • High efficacy, up to 160 lm/W • Accurate colour matching (SDCM), 4-step MacAdam • High colour rendering index CRI > 80 • Easy connection with push-in connectors • Easy installation • Zhaga compliant dimensions • Perfect fit for Helvar iC LED Drivers • Compatible holder and optics solutions available Module

L-iC-282

L-iC-562

Dimensions

280 x 24 x 6,2 mm

560 x 24 x 6,2 mm

Nominal Current

450 mA

Forward voltage

14.9 V

30 V

Luminous flux

1025 lm

2050 lm

Efficacy up to

155 lm/W

Colour variants

Tunable White (2700-6500 K)

Helvar | Data is subject to change without notice. More information at: www.helvar.com

50 W INTELLIGENT ACTIVE+ LED DRIVER LL1x50 Active+

SELV60

LINEAR DRIVERS

• Fully automatic standalone setup with smart learning functionality • Optimised presence detection, daylight harvesting and Constant Light Output (CLO) operation • Inbuilt power supply for sensor use • Protected up to 4 kV power network fast transients • Overwriting option for sensor parameters • Hybrid dimming technique for high quality light • No programming, configuration, external control wires

Control

Active+

Max. output power

50,4 W

Output

Adjustable Current

Output current

1050 mA (default) - 1400 mA

Output protection

SELV60

Luminaire class

I, II, III

Driver type

Indoor, Linear

Lifetime up to

100000 h

50 W DALI DIMMABLE LED DRIVER LL1x50-E-DA • DALI control input 1% - 100% dimming range • Hybrid dimming technique for high quality light • Protected up to 4 kV power network fast transients • Switch-Control for easy-to-use intensity control • Suitable for emergency use • DALI features: Current setting by software, Constant Light Output (CLO), Data memory bank • Helvar Driver Configurator support

Control

DALI

Max. output power

50,4 W

Output

Adjustable Current

Output current

1050 mA (default) - 1400 mA

Output protection

SELV60

Luminaire class

I, II, III

Driver type

Indoor, Linear

Lifetime up to

100000 h

Helvar | Data is subject to change without notice. More information at: www.helvar.com

2 x 35 W DALI DIMMABLE LED DRIVER LL2x35-E-DA

DALI

Max. output power

60 W

Output

Adjustable Current

Output current

350 mA (default) - 700 mA

Output protection

SELV120

Luminaire class

I, II

Driver type

Indoor, Linear

Lifetime up to

100000 h

SELV120

Control

LINEAR DRIVERS

• DALI control input 1% - 100% dimming range • Two independent SELV rated output channels • Protected up to 4 kV power network fast transients • Suitable for use in emergency lighting applications

NON-ISOLATED 10-42 W INTELLIGENT ACTIVE+ LED DRIVER LL1x10-42 Active+ • Fully automatic standalone setup with smart learning functionality • No programming, configuration, external control wires • Optimised presence detection, daylight harvesting and Constant Light Output (CLO) operation • Inbuilt power supply for sensor use • Protected up to 4 kV power network fast transients • High efficiency up to 0.93 • Overwriting option for sensor parameters • Hybrid dimming technique for high quality light • Active+ Stairway Function option available

Control

Active+

Max. output power

42 W

Output

Adjustable Current

Output current

120 mA (default) - 350 mA

Output protection

Non-isolated

Luminaire class

I, II

Driver type

Indoor, Linear

Lifetime up to

100000 h

Helvar | Data is subject to change without notice. More information at: www.helvar.com

10-42 W DALI DIMMABLE LED DRIVER LL1x10-42-E-DA

NON-ISOLATED

LINEAR DRIVERS

• DALI control input 1% - 100% dimming range • Hybrid dimming technique for high quality light • High efficiency up to 0.93 • Suitable for emergency use • Switch-Control for easy-to-use intensity control • DALI features: Current setting by software, Constant Light Output (CLO), Data memory bank • Protected up to 4 kV power network fast transients • Helvar Driver Configurator support

Control

DALI

Max. output power

42 W

Output

Adjustable Current

Output current

120 mA (default) - 350 mA

Output protection

Non-isolated

Luminaire class

I, II

Driver type

Indoor, Linear

Lifetime up to

100000 h

70 W DALI DIMMABLE LED DRIVER LL1x70-E-DA • DALI control input 1% - 100% dimming range • High efficiency up to 0.91 • Switch-Control for easy-to-use intensity control • Protected up to 4 kV power network fast transients • Suitable for emergency use

Control

DALI

Max. output power

70 W

Output

Adjustable Current

Output current

350 mA (default) - 700 mA

Output protection

Non-isolated

Luminaire class

I, II

Driver type

Indoor, Linear

Lifetime up to

100000 h

Helvar | Data is subject to change without notice. More information at: www.helvar.com

23-80 W INTELLIGENT ACTIVE+ LED DRIVER LL1x23-80-Active+

Active+

Max. output power

80 W

Output

Adjustable Current

Output current

150 mA (default) - 350 mA

Output protection

Non-isolated

Luminaire class

I, II

Driver type

Indoor, Linear

Lifetime up to

100000 h

NON-ISOLATED

Control

LINEAR DRIVERS

• Fully automatic standalone setup with smart learning functionality • No programming, configuration, external control wires • Optimised presence detection, daylight harvesting and Constant Light Output (CLO) operation • Suitable for use in emergency lighting applications • Protected up to 4 kV power network fast transients • Inbuilt power supply for sensor use • Very high efficiency up to 0.95 • Overwriting option for sensor parameters • Active+ Stairway Function

23-80 W DALI DIMMABLE LED DRIVER LL1x23-80-DA • DALI control input 1% - 100% dimming range • Very high efficiency up to 0.95 • Protected up to 4 kV power network fast transients • Switch-Control for easy-to-use intensity control • Suitable for use in emergency lighting applications • Helvar Driver Configurator support • DALI features: Current setting by software, Constant Light Output (CLO), Data memory bank

Control

DALI

Max. output power

80 W

Output

Adjustable Current

Output current

150 mA (default) - 350 mA

Output protection

Non-isolated

Luminaire class

I, II

Driver type

Indoor, Linear

Lifetime up to

100000 h

Helvar | Data is subject to change without notice. More information at: www.helvar.com

80 W INTELLIGENT ACTIVE+ LED DRIVER LL1x80-350-700 Active+

NON-ISOLATED

LINEAR DRIVERS

• Fully automatic standalone setup with smart learning functionality • Optimised presence detection, daylight harvesting and Constant Light Output (CLO) operation • Inbuilt power supply for sensor use • Protected up to 4 kV power network fast transients • Very high efficiency up to 0.94 • Suitable for use in emergency lighting applications • Overwriting option for sensor parameters • No programming, configuration, external control wires • Active+ Stairway Function

Control

Active+

Max. output power

80 W

Output

Adjustable Current

Output current

350 mA (default) - 700 mA

Output protection

Non-isolated

Luminaire class

I, II

Driver type

Indoor, Linear

Lifetime up to

100000 h

80 W DALI DIMMABLE LED DRIVER LL1x80-DA-350-700 • Hybrid dimming technique for high quality light • DALI features: Current setting by software, Constant Light Output (CLO), Data memory bank • Switch-Control for easy-to-use intensity control • Very high efficiency up to 0.94 • Protected up to 4 kV power network fast transients • Suitable for use in emergency lighting applications • Helvar Driver Configurator support

Control

DALI

Max. output power

80 W

Output

Adjustable Current

Output current

350 mA (default) - 700 mA

Output protection

Non-isolated

Luminaire class

I, II

Driver type

Indoor, Linear

Lifetime up to

100000 h

Helvar | Data is subject to change without notice. More information at: www.helvar.com

80 W DALI DIMMABLE LED DRIVER LL1x80-CR-DA

DALI

Max. output power

80 W

Output

Adjustable Current

Output current

350 mA (default) - 700 mA

Output protection

Non-isolated

Luminaire class

I, II

Driver type

Indoor, Linear

Lifetime up to

100000 h

NON-ISOLATED

Control

LINEAR DRIVERS

• DALI control input 1% - 100% dimming range • Filtered hybrid dimming for high-quality light in every application • Very high efficiency up to 0.94 • Switch-Control for easy-to-use intensity control • Protected up to 4 kV power network fast transients • Suitable for use in emergency lighting applications • DALI features: Current setting by software, Constant Light Output (CLO), Data memory bank • Helvar Driver Configurator support

110 W INTELLIGENT ACTIVE+ LED DRIVER LL1x110 Active+ • Fully automatic standalone setup with smart learning functionality • Optimised presence detection, daylight harvesting and Constant Light Output (CLO) operation • Very high efficiency up to 0.95 • Inbuilt power supply for sensor use • Overwriting option for sensor parameters • Hybrid dimming technique for high quality light • Protected up to 4 kV power network fast transients • No programming, configuration, external control wires • Active+ Stairway Function

Control

Active+

Max. output power

110 W

Output

Adjustable Current

Output current

350 mA (default) - 700 mA

Output protection

Non-isolated

Luminaire class

I, II

Driver type

Indoor, Linear

Lifetime up to

100000 h

Helvar | Data is subject to change without notice. More information at: www.helvar.com

110 W DALI DIMMABLE LED DRIVER LL1x110-E-DA

NON-ISOLATED

LINEAR DRIVERS

• DALI control input 1% - 100% dimming range • Hybrid dimming technique for high quality light • Protected up to 4 kV power network fast transients • Switch-Control for easy-to-use intensity control • Very high efficiency up to 0.95 • Suitable for emergency use • DALI features: Current setting by software, Constant Light Output (CLO), Data memory bank • Helvar Driver Configurator support

Control

DALI

Max. output power

110 W

Output

Adjustable Current

Output current

350 mA (default) - 700 mA

Output protection

Non-isolated

Luminaire class

I, II

Driver type

Indoor, Linear

Lifetime up to

100000 h

150 W DALI DIMMABLE LED DRIVER LL1x150-CR-DA • DALI control input 1% - 100% dimming range • Filtered hybrid dimming for high-quality light in every application • Switch-Control for easy-to-use intensity control • High efficiency up to 0.93 • Protected up to 4 kV power network fast transients • Suitable for use in emergency lighting applications • DALI features: Current setting by software, Constant Light Output (CLO), Data memory bank • Helvar Driver Configurator support

Control

DALI

Max. output power

150 W

Output

Adjustable Current

Output current

350 mA (default) - 700 mA

Output protection

Non-isolated

Luminaire class

I, II

Driver type

Indoor, Linear

Lifetime up to

100000 h

Helvar | Data is subject to change without notice. More information at: www.helvar.com

NON-DIMMABLE, SELV60 50 W CONSTANT CURRENT LED DRIVER LL1x50-E-CC

ON/OFF

Max. output power

50,4 W

Output

Adjustable Current

Output current

1050 mA (default) - 1400 mA

Output protection

SELV60

Luminaire class

I, II, III

Driver type

Indoor, Linear

Lifetime up to

100000 h

SELV60

Control

LINEAR DRIVERS

• Dual SELV output terminals for parallel LED connection • Protected up to 4 kV power network fast transients • Suitable for emergency use

50 W CONSTANT CURRENT LED DRIVER LL1x50-E-CC-700-1050 • Dual SELV output terminals for parallel LED connection • Protected up to 4 kV power network fast transients • Suitable for emergency use

Control

ON/OFF

Max. output power

50,4 W

Output

Adjustable Current

Output current

700 mA (default) - 1050 mA

Output protection

SELV60

Luminaire class

I, II, III

Driver type

Indoor, Linear

Lifetime up to

100000 h

Helvar | Data is subject to change without notice. More information at: www.helvar.com

80 W CONSTANT CURRENT LED DRIVER LL1x80-CC-1400-2100

SELV60

LINEAR DRIVERS

• High drive current capability, up to 2100 mA • Dual SELV output terminals for parallel LED connection • Protected up to 4 kV power network fast transients • Suitable for use in emergency lighting applications

Control

ON/OFF

Max. output power

80 W

Output

Adjustable Current

Output current

1400 mA (default) - 2100 mA

Output protection

SELV60

Luminaire class

I, II, III

Driver type

Indoor, Linear

Lifetime up to

100000 h

2 x 25 W CONSTANT CURRENT LED DRIVER LL2x25-E-CC • Two SELV rated output channels • Protected up to 4 kV network fast transients • Suitable for emergency use

Control

ON/OFF

Max. output power

50,4 W

Output

Adjustable Current

Output current

350 mA (default) - 700 mA

Output protection

SELV60

Luminaire class

I, II, III

Driver type

Indoor, Linear

Lifetime up to

100000 h

Helvar | Data is subject to change without notice. More information at: www.helvar.com

NON-ISOLATED 10-42 W CONSTANT CURRENT LED DRIVER LL1x10-42-E-CC

ON/OFF

Max. output power

42 W

Output

Multiple / Adjustable Currents

Output current

120 mA (default) - 350 mA

Output protection

Non-isolated

Luminaire class

I, II

Driver type

Indoor, Linear

Lifetime up to

100000 h

NON-ISOLATED

Control

LINEAR DRIVERS

• Very high efficiency up to 0.94 • Protected up to 4 kV network fast transients • Suitable for emergency use

10-42 W CONSTANT CURRENT LED DRIVER LL1x10-42-CC-350-700 • High efficiency up to 0.91 • Protected up to 4 kV network fast transients • Suitable for emergency use

Control

ON/OFF

Max. output power

42 W

Output

Adjustable Current

Output current

350 mA (default) - 700 mA

Output protection

Non-isolated

Luminaire class

I, II

Driver type

Indoor, Linear

Lifetime up to

100000 h

Helvar | Data is subject to change without notice. More information at: www.helvar.com

23-80 W CONSTANT CURRENT LED DRIVER LL1x23-80-E-CC

NON-ISOLATED

LINEAR DRIVERS

• Very high efficiency up to 0.95 • Protected up to 4 kV network fast transients • Suitable for emergency use

Control

ON/OFF

Max. output power

80 W

Output

Multiple / Adjustable Currents

Output current

150 mA (default) - 350 mA

Output protection

Non-isolated

Luminaire class

I, II

Driver type

Indoor, Linear

Lifetime up to

100000 h

70 W CONSTANT CURRENT LED DRIVER LL1x70-E-CC • High efficiency > 0.91 • Protected up to 4 kV network fast transients • Suitable for emergency use

Control

ON/OFF

Max. output power

70 W

Output

Adjustable Current

Output current

350 mA (default) - 700 mA

Output protection

Non-isolated

Luminaire class

I, II

Driver type

Indoor, Linear

Lifetime up to

100000 h

Helvar | Data is subject to change without notice. More information at: www.helvar.com

80 W CONSTANT CURRENT LED DRIVER LL1x80-E-CC-350-700

ON/OFF

Max. output power

80 W

Output

Adjustable Current

Output current

350 mA (default) - 700 mA

Output protection

Non-isolated

Luminaire class

I, II

Driver type

Indoor, Linear

Lifetime up to

100000 h

NON-ISOLATED

Control

LINEAR DRIVERS

• Very high efficiency up to 0.94 • Protected up to 4 kV network fast transients • Suitable for emergency use

110 W CONSTANT CURRENT LED DRIVER LL1x110-E-CC-200-350 • Very high efficiency up to 0.95 • Protected up to 4 kV network fast transients • Suitable for emergency use

Control

ON/OFF

Max. output power

110 W

Output

Adjustable Current

Output current

200 mA (default)- 350 mA

Output protection

Non-isolated

Luminaire class

I, II

Driver type

Indoor, Linear

Lifetime up to

100000 h

Helvar | Data is subject to change without notice. More information at: www.helvar.com

110 W CONSTANT CURRENT LED DRIVER LL1x110-E-CC-350-700

NON-ISOLATED

LINEAR DRIVERS

• Open and short circuit protection • Very high efficiency up to 0.95 • Protected up to 4 kV network fast transients • Suitable for emergency use

Control

ON/OFF

Max. output power

110 W

Output

Adjustable Current

Output current

350 mA (default) - 700 mA

Output protection

Non-isolated

Luminaire class

I, II

Driver type

Indoor, Linear

Lifetime up to

100000 h

150 W CONSTANT CURRENT LED DRIVER LL1x150-E-CC • Open and short circuit protection • Very high efficiency up to 0.96 • Protected up to 4 kV network fast transients • Suitable for emergency use

Control

ON/OFF

Max. output power

150 W

Output

Adjustable Current

Output current

350 mA (default) - 700 mA

Output protection

Non-isolated

Luminaire class

I, II

Driver type

Indoor, Linear

Lifetime up to

100000 h

Helvar | Data is subject to change without notice. More information at: www.helvar.com

BASIC ISOLATED 21 W CONSTANT CURRENT LED DRIVER LL1x21-CC

ON/OFF

Max. output power

21 W

Output

Multiple Currents

Output current

300 mA or 350 mA (default)

Output protection

Basic isolated

Luminaire class

I, II

Driver type

Indoor, Linear

Lifetime up to

100000 h

BASIC ISOLATED

Control

LINEAR DRIVERS

• Protected up to 4 kV network fast transients • Suitable for emergency use

26 W CONSTANT CURRENT LED DRIVER LL1x26-CC • Protected up to 4 kV network fast transients • Suitable for emergency use

Control

ON/OFF

Max. output power

26 W

Output

Multiple Currents

Output current

300 mA (default) or 350 mA

Output protection

Basic isolated

Luminaire class

I, II

Driver type

Indoor, Linear

Lifetime up to

100000 h

Helvar | Data is subject to change without notice. More information at: www.helvar.com

38 W CONSTANT CURRENT LED DRIVER LL1x38-CC

BASIC ISOLATED

LINEAR DRIVERS

• Protected up to 4 kV network fast transients • Suitable for emergency use

Control

ON/OFF

Max. output power

38 W

Output

Multiple Currents

Output current

300 mA (default) or 350 mA

Output protection

Basic isolated

Luminaire class

I, II

Driver type

Indoor, Linear

Lifetime up to

100000 h

38 W CONSTANT CURRENT LED DRIVER LL1x38-CC-350 • Protected up to 4 kV network fast transients • Suitable for emergency use

Control

ON/OFF

Max. output power

38 W

Output

Fixed Current

Output current

350 mA

Output protection

Basic isolated

Luminaire class

I, II

Driver type

Indoor, Linear

Lifetime up to

100000 h

Helvar | Data is subject to change without notice. More information at: www.helvar.com

54 W CONSTANT CURRENT LED DRIVER LL1x54-CC-350

Control

ON/OFF

Max. output power

54 W

Output

Fixed Current

Output current

350 mA

Output protection

Basic isolated

Luminaire class

I, II

Driver type

Indoor, Linear

Lifetime up to

100000 h

COMPACT DRIVERS

• Protected up to 4 kV network fast transients • Suitable for emergency use

COMPACT DRIVERS | DIMMABLE, SELV60 25 W INTELLIGENT ACTIVE+ LED DRIVER LC1x25 Active+

Control

Active+

Max. output power

25,2 W

Output

Adjustable Current

Output current

350 mA (default) - 700 mA

Output protection

SELV60

Luminaire class

I, II, III

Driver type

Indoor, Compact

Lifetime up to

100000 h

Helvar | Data is subject to change without notice. More information at: www.helvar.com

SELV60

• Fully automatic standalone setup with smart learning functionality • Inbuilt power supply for sensor use • Protected up to 4 kV network fast transients • Overwriting option for sensor parameters • Hybrid dimming technique for high quality light • No programming, configuration, external control wires • Active+ Stairway Function • Optimised presence detection, daylight harvesting and Constant Light Output (CLO) operation • Optional strain relief for independent use (LC1x30-SR)

25 W DALI DIMMABLE LED DRIVER LC1x25-DA

COMPACT DRIVERS

• DALI control input 1% - 100% dimming range • Hybrid dimming technique for high quality light • Adjustable constant current output, with LEDset resistor values • Switch-Control for easy-to-use intensity control • Internal adaptive thermal protection • Protected up to 4 kV network fast transients • Suitable for use in emergency lighting applications • DALI features: Current setting by software, Constant Light Output (CLO), Data memory bank • Optional strain relief for independent use (LC1x30-SR) • Helvar Driver Configurator support

Control

DALI

Max. output power

25,2 W

Output

Adjustable Current

Output current

350 mA (default) - 700 mA

Output protection

SELV60

Luminaire class

I, II, III

Driver type

Indoor, Compact

Lifetime up to

100000 h

35 W INTELLIGENT ACTIVE+ LED DRIVER LC1x35 Active+

SELV60

• Fully automatic standalone setup with smart learning functionality • Optimised presence detection, daylight harvesting and Constant Light Output (CLO) operation • Inbuilt power supply for sensor use • Protected up to 4 kV network fast transients • Overwriting option for sensor parameters • No programming, configuration, external control wires • Active+ Stairway Function • Optional strain relief for independent use (LC1x30-SR)

Control

Active+

Max. output power

35,7 W

Output

Adjustable Current

Output current

700 mA (default) - 1050 mA

Output protection

SELV60

Luminaire class

I, II, III

Driver type

Indoor, Compact

Lifetime up to

100000 h

Helvar | Data is subject to change without notice. More information at: www.helvar.com

35 W DALI DIMMABLE LED DRIVER LC1x35-DA

Control

DALI

Max. output power

35,7 W

Output

Adjustable Current

Output current

700 mA (default) - 1050 mA

Output protection

SELV60

Luminaire class

I, II, III

Driver type

Indoor, Compact

Lifetime up to

100000 h

COMPACT DRIVERS

• DALI control input 1% - 100% dimming range • Hybrid dimming technique for high quality light • Adjustable constant current output, with LEDset resistor values • Switch-Control for easy-to-use intensity control • Protected up to 4 kV network fast transients • Internal adaptive thermal protection • Suitable for use in emergency lighting applications • DALI features: Current setting by software, Constant Light Output (CLO), Data memory bank • Optional strain relief for independent use (LC1x30-SR) • Helvar Driver Configurator support

50 W INTELLIGENT ACTIVE+ LED DRIVER LC1x50 Active+

Control

Active+

Max. output power

50 W

Output

Adjustable Current

Output current

1050 mA (default) - 1400 mA

Output protection

SELV60

Luminaire class

I, II, III

Driver type

Indoor, Compact

Lifetime up to

100000 h

Helvar | Data is subject to change without notice. More information at: www.helvar.com

SELV60

• Fully automatic standalone setup with smart learning functionality • Optimised presence detection, daylight harvesting and Constant Light Output (CLO) operation • Protected up to 4 kV network fast transients • Inbuilt power supply for sensor use • Overwriting option for sensor parameters • Hybrid dimming technique for high quality light • No programming, configuration, external control wires • Optional strain relief for independent use (LC1x70-SR)

50 W DALI DIMMABLE LED DRIVER LC1x50-E-DA

COMPACT DRIVERS

• DALI control input 1% - 100% dimming range • Hybrid dimming technique for high quality light • Adjustable constant current output, with LEDset resistor values • Switch-Control for easy-to-use intensity control • Available with protective coating • Protected up to 4 kV network fast transients • Suitable for emergency use • Optional strain relief for independent use (LC1x70-SR) • DALI features: Current setting by software, Constant Light Output (CLO), Data memory bank • Helvar Driver Configurator support

Control

DALI

Max. output power

50,4 W

Output

Adjustable Current

Output current

1050 mA (default) - 1400 mA

Output protection

SELV60

Luminaire class

I, II, III

Driver type

Indoor, Compact (Option: Coated)

Lifetime up to

100000 h

28 W 1-10 V DIMMABLE LED DRIVER LC1x28-AN

SELV60

• Smooth 1-10 V dimming 1% - 100% • Protected up to 4 kV power network fast transients • Optional strain relief for independent use (LC1x30-SR)

Control

1-10 V

Max. output power

28 W

Output

Multiple Currents

Output current

350 mA, 500 mA or 700 mA

Output protection

SELV60

Luminaire class

I, II, III

Driver type

Indoor, Compact

Lifetime up to

100000 h

Helvar | Data is subject to change without notice. More information at: www.helvar.com

SELV120 30 W DALI DIMMABLE LED DRIVER LC1x30-E-DA

Control

DALI

Max. output power

30 W

Output

Multiple Currents

Output current

350 mA, 500 mA or 700 mA

Output protection

SELV120

Luminaire class

I, II, III

Driver type

Indoor, Compact (Option: Coated)

Lifetime up to

100000 h

COMPACT DRIVERS

• DALI control input 1% - 100% dimming range • Protected up to 4 kV network fast transients • Switch-Control for easy-to-use intensity control • Available with protective coating • Optional strain relief for independent use (LC1x30-SR)

40 W DALI DIMMABLE LED DRIVER LL1x40-E-DA-350-700

Control

DALI

Max. output power

40 W

Output

Adjustable Current

Output current

350 mA (default) - 700 mA

Output protection

SELV120

Luminaire class

I, II, III

Driver type

Indoor, Linear/Compact

Lifetime up to

100000 h

Helvar | Data is subject to change without notice. More information at: www.helvar.com

SELV120

• DALI control input 1% - 100% dimming range • Low stand-by power consumption 0.3 W • Switch-Control for easy-to-use intensity control • Protected up to 4 kV power network fast transients • Optional strain relief for independent use (LL1x40-SR)

40 W DALI DIMMABLE LED DRIVER LL1x40-E-DA-700-1050

COMPACT DRIVERS

Control

DALI

Max. output power

40 W

Output

Adjustable Current

Output current

700 mA (default) - 1050 mA

Output protection

SELV120

Luminaire class

I, II, III

Driver type

Indoor, Linear/Compact

Lifetime up to

100000 h

70 W DALI DIMMABLE LED DRIVER LC1x70-E-DA SELV120

• DALI control input 1% - 100% dimming range • Auxiliary 12 V output for cooling fan • Overload, open and short circuit protection • Protected up to 4 kV network fast transients • Optional strain relief for independent use (LC1x70-SR)

Control

DALI

Max. output power

70 W

Output

Adjustable Current

Output current

700 mA (default) - 1400 mA

Output protection

SELV120

Luminaire class

I, II

Driver type

Indoor, Compact

Lifetime up to

100000 h

Helvar | Data is subject to change without notice. More information at: www.helvar.com

30 W 1-10 V DIMMABLE LED DRIVER LC1x30-E-AN

Control

1-10 V

Max. output power

30 W

Output

Multiple Currents

Output current

350 mA, 500 mA or 700 mA

Output protection

SELV120

Luminaire class

I, II, III

Driver type

Indoor, Compact (Option: Coated)

Lifetime up to

100000 h

COMPACT DRIVERS

• Smooth 1-10 V dimming 1% - 100% • Protected up to 4 kV network fast transients • Available with protective coating • Optional strain relief for independent use (LC1x30-SR)

NON-DIMMABLE, SELV60 12 W CONSTANT CURRENT LED DRIVER LL1x12-E-CC-350

Control

ON/OFF

Max. output power

12 W

Output

Fixed Current

Output current

350 mA

Output protection

SELV60

Luminaire class

I, II, III

Driver type

Indoor, Linear/Compact

Lifetime up to

30000 h

Helvar | Data is subject to change without notice. More information at: www.helvar.com

SELV60

• Suitable for independent use • Linear enclosure with an integrated strain relief

14 W CONSTANT CURRENT LED DRIVER LC1x14-CC-350

COMPACT DRIVERS

• Suitable for independent use • Linear enclosure with an integrated strain relief

Control

ON/OFF

Max. output power

14,7 W

Output

Fixed Current

Output current

350 mA

Output protection

SELV60

Luminaire class

I, II, III

Driver type

Indoor, Compact

Lifetime up to

50000 h

15 W CONSTANT CURRENT LED DRIVER LL1x15-E-CC-500

SELV60

• Suitable for independent use • Linear enclosure with an integrated strain relief

Control

ON/OFF

Max. output power

15 W

Output

Fixed Current

Output current

500 mA

Output protection

SELV60

Luminaire class

I, II, III

Driver type

Indoor, Linear/Compact

Lifetime up to

30000 h

Helvar | Data is subject to change without notice. More information at: www.helvar.com

20 W CONSTANT CURRENT LED DRIVER LL1x20-E-CC-350

Control

ON/OFF

Max. output power

20 W

Output

Fixed Current

Output current

350 mA

Output protection

SELV60

Luminaire class

I, II, III

Driver type

Indoor, Linear/Compact

Lifetime up to

30000 h

COMPACT DRIVERS

• Suitable for independent use • Linear enclosure with an integrated strain relief

20 W CONSTANT CURRENT LED DRIVER LC1x20-CC-500

Control

ON/OFF

Max. output power

21 W

Output

Fixed Current

Output current

500 mA

Output protection

SELV60

Luminaire class

I, II, III

Driver type

Indoor, Compact

Lifetime up to

50000 h

Helvar | Data is subject to change without notice. More information at: www.helvar.com

SELV60

• Suitable for independent use • Linear enclosure with an integrated strain relief

20 W CONSTANT CURRENT LED DRIVER LL1x20-E-CC-500

COMPACT DRIVERS

• Suitable for independent use • Linear enclosure with an integrated strain relief

Control

ON/OFF

Max. output power

20 W

Output

Fixed Current

Output current

500 mA

Output protection

SELV60

Luminaire class

I, II, III

Driver type

Indoor, Linear/Compact

Lifetime up to

30000 h

20 W CONSTANT CURRENT LED DRIVER LL1x20-E-CC-700

SELV60

• Suitable for independent use • Linear enclosure with an integrated strain relief

Control

ON/OFF

Max. output power

20 W

Output

Fixed Current

Output current

700 mA

Output protection

SELV60

Luminaire class

I, II, III

Driver type

Indoor, Linear/Compact

Lifetime up to

30000 h

Helvar | Data is subject to change without notice. More information at: www.helvar.com

25 W CONSTANT CURRENT LED DRIVER LC1x25-CC

Control

ON/OFF

Max. output power

25,2 W

Output

Adjustable Current

Output current

350 mA (default) - 700 mA

Output protection

SELV60

Luminaire class

I, II, III

Driver type

Indoor, Compact

Lifetime up to

100000 h

COMPACT DRIVERS

• Adjustable constant current output, with LEDset resistor values • Duplicated mains connection terminal • Protected up to 4 kV network fast transients • Suitable for use in emergency lighting applications • Optional strain relief for independent use (LC1x30-SR)

30 W CONSTANT CURRENT LED DRIVER LC1x30-CC-700

Control

ON/OFF

Max. output power

30,1 W

Output

Fixed Current

Output current

700 mA

Output protection

SELV60

Luminaire class

I, II, III

Driver type

Indoor, Compact

Lifetime up to

50000 h

Helvar | Data is subject to change without notice. More information at: www.helvar.com

SELV60

• Suitable for independent use • Linear enclosure with an integrated strain relief

35 W CONSTANT CURRENT LED DRIVER LC1x35-CC

COMPACT DRIVERS

Control

ON/OFF

Max. output power

35,7 W

Output

Adjustable Current

Output current

700 mA (default) - 1050 mA

Output protection

SELV60

Luminaire class

I, II, III

Driver type

Indoor, Compact

Lifetime up to

100000 h

40 W CONSTANT CURRENT LED DRIVER LC1x40-CC-1050

SELV60

• Suitable for independent use • Linear enclosure with an integrated strain relief

Control

ON/OFF

Max. output power

40 W

Output

Fixed Current

Output current

1050 mA

Output protection

SELV60

Luminaire class

I, II, III

Driver type

Indoor, Compact

Lifetime up to

50000 h

Helvar | Data is subject to change without notice. More information at: www.helvar.com

50 W CONSTANT CURRENT LED DRIVER LC1x50-E-CC

Control

ON/OFF

Max. output power

50,4 W

Output

Adjustable Current

Output current

1050 mA (default) - 1400 mA

Output protection

SELV60

Luminaire class

I, II, III

Driver type

Indoor, Compact

Lifetime up to

100000 h

COMPACT DRIVERS

• Dual output terminals for parallel LED connection • Protected up to 4 kV power network fast transients • Suitable for emergency use • Optional strain relief for independent use (LC1x70-SR)

SELV120 20 W CONSTANT CURRENT LED DRIVER LL1x20-E-CC

Control

ON/OFF

Max. output power

20 W

Output

Multiple Currents

Output current

350 mA, 500 mA or 700 mA

Output protection

SELV120

Luminaire class

I, II, III

Driver type

Indoor, Linear/Compact (Option: Coated)

Lifetime up to

30000 h

Helvar | Data is subject to change without notice. More information at: www.helvar.com

SELV120

• Protected up to 4 kV power network fast transients • Available with protective coating • Linear enclosure with an integrated strain relief

30 W CONSTANT CURRENT LED DRIVER LC1x30-E-CC

COMPACT DRIVERS

• Protected up to 4 kV power network fast transients • Available with protective coating • Optional strain relief for independent use (LC1x30-SR)

Control

ON/OFF

Max. output power

30 W

Output

Multiple Currents

Output current

350 mA, 500 mA or 700 mA

Output protection

SELV120

Luminaire class

I, II, III

Driver type

Indoor, Compact (Option: Coated)

Lifetime up to

100000 h

40 W CONSTANT CURRENT LED DRIVER LL1x40-E-CC

SEL120

• Protected up to 4 kV power network fast transients • Optional strain relief for independent use (LL1x40-SR)

Control

ON/OFF

Max. output power

40 W

Output

Adjustable Current

Output current

350 mA (default) - 1050 mA

Output protection

SELV120

Luminaire class

I, II, III

Driver type

Indoor, Linear/Compact

Lifetime up to

100000 h

Helvar | Data is subject to change without notice. More information at: www.helvar.com

70 W CONSTANT CURRENT LED DRIVER LC1x70-E-CC

ON/OFF

Max. output power

70 W

Output

Adjustable Current

Output current

700 mA (default) - 1400 mA

Output protection

SELV120

Luminaire class

I, II

Driver type

Indoor, Compact

Lifetime up to

100000 h

SELV120

Control

COMPACT DRIVERS

• Protected up to 4 kV power network fast transients • Auxiliary 12 V output for cooling fan • Optional strain relief for independent use (LC1x70-SR)

Helvar | Data is subject to change without notice. More information at: www.helvar.com

OUTDOOR & COATED DRIVERS

OUTDOOR

OUTDOOR DRIVERS Helvarâ&#x20AC;&#x2122;s range of IP65 and IP67 rated drivers offer flexibility for outdoor luminaire design. Our drivers have maximum power from 50 W to 110 W and lifetime up to 50.000 hours. There's a wide range of output current to be selected to be suited for different luminaire designs. The output current can be selected between 350 mA (60 W), 700 mA (60 W and 100 W), 1050 mA (100 & 50 W), 1400 mA (50 W, 60 W and 100 W), and 2100 mA (100 W).

COATED LED DRIVERS FOR OUTDOOR LUMINAIRES Helvar's popular LED drivers are available also with added coating which protect LED driver electronics against humidity and dirt in challenging conditions. Coated IP 20 rated LED drivers ensure extra protection for industrial or outdoor luminaires.

A very thin layer of lacquer coated onto the circuit board provides added protection against humidity, in case accidental condensation appears in the luminaire. These coated drivers are suitable for extremely cold environments due to the extended temperature range starting from -40 Â°C. Performance and other features as with respective non-coated drivers. Product

Max Power

Control

Page

LL1x20-E-CC Coated

20 W

ON/OFF

LC1x30-E-DA Coated

30 W

DALI

LC1x30-E-CC Coated

30 W

ON/OFF

LC1x30-E-AN Coated

30 W

1-10 V

LC1x50-E-DA Coated

50.4 W

DALI

Helvar | Data is subject to change without notice. More information at: www.helvar.com

50 W OUTDOOR LED DRIVER OL1x50-E-CC-1050 • Suitable for outdoor IP67 and independent usage • Protected up to 4 kV power network fast transients • Suitable for emergency use

Control

ON/OFF

Max. output power

50,4 W

Output

Fixed Current

Output current

1050 mA

Output protection

SELV60

Luminaire class

I, II, III

Driver type

Outdoor, Linear

Lifetime up to

50000 h

50 W OUTDOOR LED DRIVER OL1x50-E-CC-1400

Control

ON/OFF

Max. output power

50,4 W

Output

Fixed Current

Output current

1400 mA

Output protection

SELV60

Luminaire class

I, II, III

Driver type

Outdoor, Linear

Lifetime up to

50000 h

Helvar | Data is subject to change without notice. More information at: www.helvar.com

OUTDOOR

• Suitable for outdoor IP67 and independent usage • Protected up to 4 kV power network fast transients • Suitable for emergency use

60 W CONSTANT CURRENT OUTDOOR LED DRIVER OL1x60-E-CC • Suitable for outdoor IP67 and independent usage • Protected up to 4 kV power network fast transients

Control

ON/OFF

Max. output power

63 W

Output

Multiple Currents

Output current

350, 700 or 1400 mA

Output protection

SELV120

Luminaire class

I, II, III

Driver type

Outdoor, Linear

Lifetime up to

50000 h

100 W CONSTANT CURRENT LED DRIVER OL1x100-E-CC1 OUTDOOR

• Suitable for outdoor IP67 and independent usage • Protected up to 4 kV power network fast transients

Control

ON/OFF

Max. output power

105 W

Output

Multiple Currents

Output current

700 or 1050 mA

Output protection

Non-Isolated

Luminaire class

I, II

Driver type

Outdoor, Linear

Lifetime up to

50000 h

Helvar | Data is subject to change without notice. More information at: www.helvar.com

100 W CONSTANT CURRENT LED DRIVER OL1x100-E-CC2 • Suitable for outdoor IP67 and independent usage • Protected up to 4 kV power network fast transients

ON/OFF

Max. output power

105 W

Output

Multiple Currents

Output current

1400 or 2100 mA

Output protection

SELV120

Luminaire class

I, II, III

Driver type

Outdoor, Linear

Lifetime up to

50000 h

OUTDOOR

Control

Helvar | Data is subject to change without notice. More information at: www.helvar.com

DIMMABLE CONSTANT VOLTAGE SOLUTION FOR DECORATIVE LIGHTING

As part of the DALI product portfolio, Helvar offers Constant Voltage Dimming Solution for indirect and/or decorative lighting. The solution can be used with constant voltage LED strips, which brings flexibility to lighting design. The LED strips can be folded, and the length of the strip can be chosen suitable for the environment. Several LED strips can be installed in the solution in parallel with up to the maximum current of 5000 mA. The products are a small linear design enabling easy installation. The extremely wide DALI dimming range (0.1% – 100%) combined with higher PWM frequency (1 kHz) to reduce flickering light, offer superior dimming quality of the solution. The products in this solution have system standby power amongst the lowest on the market, as well as the high voltage (24 V) power supply that helps greatly to reduce power loss over the LED strips, making the solution very energy efficient.

CONSTANT VOLTAGE

The solution has added safety, as the DALI input of LL1-CV-DA products are mains rated and double isolated from the power input and load. The solution is suitable for class I, II and SELV < 60 V rated luminaires.

The products you need for the solution: • Constant Voltage power supply • DALI Extension Unit for dimming the Constant Voltage, such as LL1-CV-DA • One or several constant voltage LED strips

Helvar | Data is subject to change without notice. More information at: www.helvar.com

DIMMABLE CONSTANT VOLTAGE DALI LED DRIVER EXTENSION LL1-CV-DA • DALI extension unit for constant voltage LED driver • DALI control input, 0.1% - 100% dimming range • Stand-by power < 0.1 W • Duplicate terminals for parallel connection • Linear enclosure with an integrated strain relief

Control

DALI

Max. output power

120 W

Output

Constant Voltage

Output current

Max. 5 A

Output protection

Depends on CV power supply

Luminaire class

Depends on CV power supply

Driver type

Indoor, Linear

30 W CONSTANT VOLTAGE LED DRIVER LL1x30-CV12

Control

ON/OFF

Max. output power

30 W

Output

Constant Voltage

Output current

Max. 2.5 A

Output protection

SELV60

Luminaire class

I, II, III

Driver type

Outdoor, Linear

Lifetime up to

30000 h

Helvar | Data is subject to change without notice. More information at: www.helvar.com

CONSTANT VOLTAGE

• 12 V constant voltage output • Suitable for independent use • Linear enclosure with an integrated strain relief

75 W CONSTANT VOLTAGE LED DRIVER LL1x75-CV12 • 12 V constant voltage output • Suitable for independent use • Linear enclosure with an integrated strain relief

Control

ON/OFF

Max. output power

75 W

Output

Constant Voltage

Output current

Max. 6.25 A

Output protection

SELV60

Luminaire class

I, II, III

Driver type

Outdoor, Linear

Lifetime up to

30000 h

30 W CONSTANT VOLTAGE LED DRIVER LL1x30-E-CV24 CONSTANT VOLTAGE

• 24 V constant voltage output • Suitable for independent use • Linear enclosure with an integrated strain relief

Control

ON/OFF

Max. output power

30 W

Output

Constant Voltage

Output current

Max. 1.25 A

Output protection

SELV60

Luminaire class

I, II, III

Driver type

Indoor, Linear

Lifetime up to

30000 h

Helvar | Data is subject to change without notice. More information at: www.helvar.com

30 W CONSTANT VOLTAGE LED DRIVER OL1x30-E-CV24 • 24 V constant voltage output • Suitable for independent use • Suitable for outdoor use IP67 • Double insulated enclosure

Control

ON/OFF

Max. output power

30 W

Output

Constant Voltage

Output current

Max. 1.25 A

Output protection

SELV60

Luminaire class

I, II, III

Driver type

Indoor, Linear

Lifetime up to

30000 h

75 W CONSTANT VOLTAGE LED DRIVER LL1x75-E-CV24

Control

ON/OFF

Max. output power

75 W

Output

Constant Voltage

Output current

Max. 3.125 A

Output protection

SELV60

Luminaire class

I, II, III

Driver type

Indoor, Linear

Lifetime up to

30000 h

Helvar | Data is subject to change without notice. More information at: www.helvar.com

CONSTANT VOLTAGE

• 24 V constant voltage output • Suitable for independent use • Linear enclosure with an integrated strain relief

75 W CONSTANT VOLTAGE LED DRIVER OL1x75-E-CV24 • 24 V constant voltage output • Suitable for independent use • Suitable for outdoor use IP67 • Double insulated enclosure

Control

ON/OFF

Max. output power

75 W

Output

Constant Voltage

Output current

Max. 3.125 A

Output protection

SELV60

Luminaire class

I, II, III

Driver type

Indoor, Linear

Lifetime up to

30000 h

120 W CONSTANT VOLTAGE LED DRIVER LL1x120-CV24 CONSTANT VOLTAGE

• 24 V constant voltage output • Suitable for independent use • Double insulated enclosure • Linear enclosure with an integrated strain relief

Control

ON/OFF

Max. output power

120 W

Output

Constant Voltage

Output current

Max. 5 A

Output protection

SELV60

Luminaire class

I, II, III

Driver type

Indoor, Linear

Lifetime up to

30000 h

Helvar | Data is subject to change without notice. More information at: www.helvar.com

CLICK-ON STRAIN RELIEFS These easy to assemble click-on strain relief can be used together with a LED driver when the driver needs to be safely installed outside of a luminaire (independent use).

LL1x2130-SR • For 30mm wide metal case Helvar LED drivers • Easy installation • Sturdy structure, compatible with cables of different thickness • Each pack includes 2 x strain reliefs

LL1x2135-SR • For 35mm wide metal case Helvar LED drivers • Easy installation • Sturdy structure, compatible with cables of different thickness • Each pack includes 2 x strain reliefs

LC1x30-SR ACCESSORIES

• The LC1x30-SR strain relief is compatible with the LC1x30 range • Fully adjustable cable tightening • Robust and easy construction

LC1x70-SR • Easy to assemble click-on strain relief for the LC1x50 and LC1x70 series • Allows independent driver usage • Screws for internal cable clamps included • Cable clamps allowing different cable thicknesses

LL1x40-SR • Easy to assemble click-on strain relief for LL1x40 series • Allows independent driver usage • Screws for internal cable clamps included • Cable clamps allowing different cable thicknesses • Each pack includes 2 x strain reliefs Helvar | Data is subject to change without notice. More information at: www.helvar.com

LED MODULES LS SERIES • High efficacy up to 163 lm/W • Homogenous light distribution, 11.5 mm pitch between LEDs • Accurate colour matching (SDCM), 3-step MacAdam • High colour rendering index CRI > 80 • Zhaga compliant dimensions • Easy connection with push-in connectors • Modular product platform for design flexibility • Easy installation • Compatible holder and optics solutions available

Module

LS-142A

LS-282A

LS-562A

Dimensions

140 x 24 x 6 mm

280 x 24 x 6 mm

560 x 24 x 6 mm

Nominal Current

350 mA

Forward voltage

11.8 V

23.6 V

47.2 V

Luminous flux

645 lm

1290 lm

2580 lm

Efficacy up to

163 lm/W

Colour variants

3000 K (830) 4000 K (840)

LED MODULES

LP SERIES • High value linear module • High efficacy up to 165 lm/W • Homogenous light distribution, pitch 15,6 mm between LEDs • Accurate colour matching (SDCM), 3-step MacAdam • Modular product platform for design flexibility • Designed for easy installation and series connection • Zhaga compliant dimensions • Compatible holder and optics solutions available

Module

LP-142

LP-282

LP-562

Dimensions

140 x 24 x 6,2 mm

280 x 24 x 6,2 mm

560 x 24 x 6,2 mm

Nominal Current

350 mA

Forward voltage

17.5 V

34.9 V

Luminous flux

445 lm

890 lm

1780 lm

Efficacy up to

165 lm/W

Colour variants

3000 K (830) 4000 K (840) 5000 K (850)

Helvar | Data is subject to change without notice. More information at: www.helvar.com

L-IC SERIES TUNABLE WHITE LED MODULES • Tunable White module, adjustable colour temperature 2700 K to 6500 K • High efficacy, up to 160 lm/W • Accurate colour matching (SDCM), 4-step MacAdam • High colour rendering index CRI > 80 • Easy connection with push-in connectors • Easy installation • Zhaga compliant dimensions • Compatible holder and optics solutions available • Modular product platform for design flexibility • See page 4 for Helvar Tunable White iC solution Module

L-iC-282

L-iC-562

Dimensions

280 x 24 x 6,2 mm

560 x 24 x 6,2 mm

Nominal Current

450 mA

Forward voltage

14.9 V

30 V

Luminous flux

1025 lm

2050 lm

Efficacy up to

155 lm/W

Colour variants

Tunable White (2700-6500 K)

CHIP ON BOARD MODULES

COB 26 W series

COB 40 W series

LED MODULES

• 3-Step MacAdam binning for colour consistency • High luminous efficacy for maximum energy efficiency • Range of power versions and colour temperatures from 3000 K to 5000 K CCT for design freedom • Compatible Helvar LED drivers (CC and DALI) • Compatible holder and optics solutions available

LMC LED MODULE COVERS Helvar's module covers provide protection from electrical parts of the module in luminaire installations as well as diffusion to achieve more uniform light. The mounting parts offer a sturdy and simple way to install modules into luminaires. Clear and opal versions available, the optical diffusion in the opal versions improve the glare reduction and even light distribution of the modules and luminaires. Perfect fit for iC, LS and LP modules with three available lenghts, custom lengths possible on demand.

Helvar | Data is subject to change without notice. More information at: www.helvar.com

iDim

ACTIVE+

SELF-LEARNING LIGHTING Helvar’s Active+ is an out-of-the-box standalone solution consisting of an LED driver and “our smallest sensor” yet built into the luminaire. www.helvar.com/activeplus SIMPLE INSTALLATION: Luminaire fitted with Active+ is as easy to install as a simple switched luminaire. No control wiring, programming or configuration is needed.

DAYLIGHT HARVESTING

SELF-LEARNING: Active+ uses 60-100 hours to learn about its environment external daylight conditions, and other luminaires around it.

PRESENCE DETECTION

ACTIVE+ LED DRIVER SMART LUMINAIRE SOLUTIONS

The Active+ LED drivers have an inbuilt smart learning functionality. With no need for programming, configuration or external control wiring, the LED driver is optimised for presence detection and daylight harvesting. The driver has an inbuilt power supply that provides power for the Active+ Sense.

ACTIVE+ SENSOR The Active+ Sense combines motion and light sensing all packaged up in a very compact unit. The device is mounted inside the luminaire and is connected directly to the Active+ LED driver with no need for an additional power supply unit.

SMART ENERGY SAVINGS: Compared to a simple switched luminaire, Active+ brings added features - presence detection, daylight harvesting and seamless and comfortable dimming.

fitted with Active+ solution are ideal for refurbishment projects, as well as for new offices, corridors, open plan areas and storage areas.

OPTIONAL ACTIVE+ MOBILE APP With an optional Active+ Mobile app, the end user can easily change the light levels of individual luminaires if the automatic setup needs fine-tuning.

Active+

FITTING IN A LUMINAIRE The Active+ driver and sensor are designed to fit flexibly into a luminaire, which then can be installed as easily as a basic switching luminaire, having no physical or electrical connection to any other external lighting components such as control panels, dimmers or common sensors. Luminaires

Helvar | Data is subject to change without notice. More information at: www.helvar.com

DIMMABLE LED DRIVERS WITH ACTIVE+ FUNCTIONALITY • Fully automatic standalone setup with smart learning functionality • Optimised presence detection, daylight harvesting and Constant Light Output (CLO) operation • Inbuilt power supply for sensor use • Overwriting option for sensor parameters • No programming, configuration, external control wires • Adjustable output current • For Indoor use only • Lifetime up to 100 000 h Active+ LED driver

Max output Output power Current

Output protection

Luminaire Type class

LC1x25 Active+

25 W

350 mA - 700 mA

SELV60

I, II, III

Compact 23

LC1x35 Active+

35 W

700 mA - 1050 mA

SELV60

I, II, III

Compact 24

LL1x10-42 Active+

42 W

120 mA - 350 mA

Non-isolated I, II

LC1x50 Active+

50 W

1050 mA - 1400 mA SELV60

I, II, III

Compact 25

LL1x50 Active+

50 W

1050 mA - 1400 mA SELV60

I, II, III

Linear

LL1x23-80 Active+

80 W

150 mA - 350 mA

Non-isolated I, II

Linear

LL1x80-350-700 Active+ 80 W

350 mA - 700 mA

Non-isolated I, II

Linear

LL1x110 Active+

350 mA - 700 mA

Non-isolated I, II

Linear

SMART LUMINAIRE SOLUTIONS

110 W

Linear

Page

Motion detection area

ACTIVE+ SENSE T3020 • • • • • • •

Directly fitted into the luminaire No need for additional wiring to luminaire Powered by Active+ driver Plugs directly into the Active+ driver Flexibility for luminaire installation Combines motion and light sensing Compact unit (32.4 mm x 15.5 mm x 9.4 mm)

80° 3m

Constant light reception area

60°

3.5 m

Helvar | Data is subject to change without notice. More information at: www.helvar.com

LIGHTING CONTROL SOLUTIONS

ROOM

easySwitch Simple Switching Solutions

ROOM

iDim Smart standalone solutions

FLOOR

SMART LUMINAIRE SOLUTIONS

Programmable Solutions

BUILDING Lighting management solutions

Helvar | Data is subject to change without notice. More information at: www.helvar.com

easySwitch

• Simple on/off • Standalone • Mains switching • Easy to install and set-up • Low cost with fast payback

Helvar offers solutions from simple switching solutions and standalone solutions to building/several buildings wide networks. Helvar components can be used on all levels. For larger lighting control solutions, please refer

www.helvar.com/solutions

iDim

• Various smart and simple control solutions • Either ceiling or luminaire mounted • Easy installation with minimal or no configuration on site • High level of automation and energy saving • Smart solutions for refurbishment

DIGIDIM

SMART LUMINAIRE SOLUTIONS

• Smart programmable area control • Scalable from small to large rooms or areas • Provides energy efficiency whilst maximising user wellbeing • Freedom for user to control via a wide range of user control panels • Integration to audiovisual system

Imagine

• Maximal freedom in lighting design • Flexible and scalable, from single room to large buildings or multi building campus • Live energy monitoring and lighting control via various user interface options • Possibility to create lighting scenes and transitions for automated control • Simple but unique colour / colour temperature control • Integration to other types of building automation systems

Helvar | Data is subject to change without notice. More information at: www.helvar.com

LEDesign calculation tool LEDesign from Helvar has been designed to help lighting specialists select the compatible control gear for any given LED light source and compare the energy efficiency of the LED solutions. Using LED module’s main input data, the LEDesign tool automates the selection process for compatible LED modules and LED drivers from Helvar’s wide range. LEDesign shows the key electrical and photometrical parameters for the selected combination and indicates whether the LEDs are under or overdriven. What’s more, the tool can also be programmed to display an efficiency graph of the selected LED load, showing how well it will perform. Additionally, the tool allows for very simple energy comparison against traditional light sources. The regularly updated mobile application for Android and iOS users is easy to use online or offline. LEDesign is also available as a browser version at ledesign.helvar.com and for Windows® PC as a desktop version.

ledesign.helvar.com

Helvar Driver Configurator APPS & SOFTWARE

Helvar Driver Configurator is a tool for advanced parameter setting of Helvar DALI LED Drivers and Helvar Tunable White iC LED Drivers. One great feature is an automatic programming mode, which can be used in luminaire manufacturing phase, or programming driver parameters automatically in installation. Also the possibility to program drivers with command prompt commands, broadcast to all or address by address, and an option to use external software to command programming of drivers makes the Helvar LED Driver configuration process more efficient. Helvar Driver Configurator allows you to set LED module parameters for Helvar iC LED drivers to ensure proper operation during color temperature and light intensity control. The tool can also be used to configure other LED driver parameters, like output current, depending on the Helvar DALI LED driver model.

Helvar | Data is subject to change without notice. More information at: www.helvar.com

LED DRIVER GLOSSARY Mains input markings (L): Live wire, (N): Neutral wire, (~): Alternating current, AC Functional Earth Driver with functional earth has a double or re-inforced insulation between live parts and accessible conductive parts. Protective Earth Driver with protective earth has a basic insulation from live parts. Switch-Control Protocol for controlling the light with a mains rated retrievable switch.

[Iset]

I-Set setting of driver output current by external resistor. LEDSet Harmonization of resistors for equal module currents from different producers. Reduces the risk of interchanging resistors and improves the availability of prefabricated resistors. More: http://www.zhagastandard.org/ NTC Negative Temperature Coefficient, an external resistor component having a negative thermal coefficient of the resistance. The NTC-resistor is used as a temperature sensor in luminaires. Driver load LED load showing orientation on Anode (+) and Cathode (-). Cable requirements Strip length and cross section requirement for the cables. DALI Digital Addressable Lighting Interface, a digital protocol for lighting control. A DALI system can be made up of control gears, control devices and bus power supplies. The system allows for individual addressing and bidirectional communication between any components in the network. DALI-2 certification brings the promise of significantly improved interoperability and additional functionality compared with current DALI (version 1) systems in the market. iC Intelligent Colour – Products designed for controlling colour or tunable white, Helvar only marking. ENEC European Norms Electrical Certification, shows that product has been certified by one of the national certification institutes in Europe ensuring that it complies with the relevant European safety standards. The number expresses which approval body has issued the certificate: 16 – SGS Fimko, 14 – SEMKO,10 - VDE Germany, 18 – TÜV Rheinland Hungary.

Helvar | Data is subject to change without notice. More information at: www.helvar.com

ELV – Protect against electrical shock where electrical voltage is not higher than voltage, which does not exceed 50Vac or 120V ripple free DC between conductors or between any conductor and earth. SELV – ELV in a circuit which is isolated from the mains supply by insulation not less than that between the primary and secondary circuits of a safety isolating transformer (according to IEC61158-2-6). Double insulation A double insulated control gear for inbuilt usage, that does not require a safety connection to electrical earth (ground). This is usually achieved by having two layers of insulating material surrounding live parts. Independent Symbol for independent control gear Double insulation A general symbol for double insulated electrical appliances. NOTE: Equipped with strain relief and can therefore be used as an independent device. Short-circuit proof, safety isolating lamp control gear (SELV control gear). CE - Conformité Européenne, meaning European Conformity, is a mandatory conformity marking for certain products sold within the European Economic Area (EEA). The CE marking is the manufacturer's declaration that the product meets the requirements of the applicable EC directives. NOTE: It is not a certification from a third party approval body.

LED GLOSSARY

L N ~

EAC – Eurasian Conformity mark, certification on the territory of Customs Union, in Russia, Kazakhstan, Republic of Belarus and Ukraine of conformance to technical regulations. CCC – China Compulsory Certificate, a compulsory safety mark for drivers imported, sold or used in the Chinese market. PF – Power factor, the ratio of the real power flowing to the load versus the apparent power in the circuit. tc – Case temperature, maximum allowed temperature for the product measured at the marked tc point. ta – Maximum allowed ambient operating temperature range for driver. NOTE: not the same as the room temperature.

User Guide

SWITCH-CONTROL

FOR LED DRIVERS

Switch-Control is a protocol for controlling the light with a mains rated retrievable switch.

CONNECTION OF SWITCH-CONTROL Switch-Control operates by connecting the mains voltage to the DALI input terminals. Therefore please ensure that all the components connected in this line are mains rated and protected according to all applicable safety requirements. The support of DALI operation is disabled for the time of Switch-Control operation and re-enabled with a mains reset. The maximum number of drivers per switch is 20. Ensure all drivers and other loads are connected to the same mains phase.

SWITCH-CONTROL USER GUIDE

The maximum wire length from the switch to the driver is 25 m. The wire length can be extended to 200 m by connecting a capacitor (1 ÎźF, 275 V) across the Switch-Control input.

SWITCH-CONTROL FOR DIMMING THE LIGHT INTENSITY Switch-Control active less than 50 ms

No operation. This is a protection against short interruptions and disturbances in the control cables.

Switch-Control active 100-350 ms

Short press (ON/OFF function); toggle operation between ON and OFF, At switch ON the light returns to the previous level before OFF;

Switch-Control active for onger than 450 ms

Press and hold (Fade UP/DOWN); after switch ON the first dimming direction is always to dim down; if you press and hold from OFF the light goes to min level and starts fading up; the dimming direction is always changed when Switch-Control is released.

The Switch-Control fade is using DALI commands UP and DOWN with a fixed fade rate of 5 sec from min level to max level.

Helvar | Data is subject to change without notice. More information at: www.helvar.com

Due to differences in the cable-inductances of individual luminaires the intensity of the various drivers might occasionally go out of sequence with time. In this case press and hold the Switch-Control until all lights are ON. Then Switch all lights OFF with a short press. This will bring all lights back into synchronisation again. You can as an alternative synchronisation procedure carry out a power reset. Switching the mains OFF and ON will perform a total reset of the drivers, that go into the default factory setting providing “power on to last level “ is not activated.

SETTING POWER ON TO LAST LEVEL WITH SWITCH-CONTROL Following sequence will either activate or deactivate “Power on to last level” functionality: • 1 x long switch (20- 25 sec.) • 3 x short switch (100-350 ms) • 1 x long switch (20- 25 sec.) Approximately a 2 seconds delay is allowed between the switches. When activating the light must be switched ON. When deactivating the light must be switched OFF. Note: Power On to last level cannot be set by Switch-Control in the iC drivers, this must be done with a DALI command.

THE SIMPLEST CONTROL OF TUNABLE WHITE IN A SINGLE LUMINAIRE The traditional “retrievable switch” solutions provides features such as switching the light ON/OFF or dimming the light intensity UP/DOWN. Helvar’s iC drivers are on top of this capable of tuning the colour temperature with one single Switch-Control unit, such as a simple rocker switch

SWITCH-CONTROL FOR THE CONTROL OF COLOUR TEMPERATURE AND INTENSITY Dimming the intensity • Short press ON / OFF < 1 s → Switch the lights ON/OFF, ON level is always with last level setting of intensity and colour temperature • Changing the intensity • Long press > 1s → Lights dims always first down, next long press lights dim up Changing the colour temperature • Long press > 1s dimming direction have to be up • Hold the button → the light goes to full intensity • Hold the button for addional 6 sec→ colour temperatures jumps to coldest colour temperature • Still hold the button→ colour temperature changes from cold to warm • Releasing the button sets the new colour temperature. or • Press and hold button > 1s → The lights dims slowely from min. to max. Hold the button for addional 6 second the colour temperature change starts

SWITCH-CONTROL USER GUIDE

RESET OF SWITCH-CONTROL

RESET OF SWITCH-CONTROL IN IC DRIVERS The intensity and/or CCT values of the various drivers might go out of sequence with time due to differences in the cableinductances of individual luminaires. In this case press and hold the Switch-Control until all lights are ON. Then perform a normal colour temperature setting as described above. This will bring all lights back into synchronisation again. You can as an alternative synchronisation carry out a power reset. Switching the mains OFF and ON will perform a reset of both light intensity and colour temperature to the default factory setting providing “power on to last level “ is deactivated.

Note 1: Switch-Control in LL60/2-E-DA-iC, LL35/2-E-DA-iC and LC35/2-E-DA-iC drivers is only allowed to be used in Class I luminaires.

Helvar | Data is subject to change without notice. More information at: www.helvar.com

NON-DIMMABLE CONSTAN CURRENT

LINEAR LED DRIVERS

DIMMABLE DALI / DT8

TUNABLE WHITE

TUNABLE WHITE & LINEAR LED DRIVERS Model

Output protection

Control

IP rating

Max. output power [W]

Output type

Output Current (mA)

LC35/2-DA-iC

SELV < 60 V

DALI + DT8

IP20

Adjustable

350–700

LL35/2-E-DA-iC

SELV < 120 V

DALI + DT8

IP20

Adjustable

350–700

LL60/2-E-DA-iC

SELV < 120 V

DALI + DT8

IP20

Adjustable

350–700

LL1x50-E-DA

SELV < 60 V

DALI

IP20

50.4

Adjustable

1050–1400

LL1x40-E-DA-350-700

SELV < 120 V

DALI

IP20

Adjustable

350-700

LL1x40-E-DA-700-1050

SELV < 120 V

DALI

IP20

Adjustable

700–1050

LL2x35-E-DA

SELV < 120 V

DALI

IP20

2x35

Adjustable

350–700

LL1x10-42-E-DA

Non-Isolated

DALI

IP20

Adjustable

120–350

LL1x23-80-DA

Non-Isolated

DALI

IP20

Adjustable

150–350

LL1x70-E-DA

Non-Isolated

DALI

IP20

Adjustable

350–700

LL1x80-DA-350-700

Non-Isolated

DALI

IP20

Adjustable

350-700

LL1x80-CR-DA

Non-Isolated

DALI

IP20

Adjustable

350-700

LL1x110-E-DA

Non-Isolated

DALI

IP20

110

Adjustable

350-700

LL1x150-CR-DA

Non-Isolated

DALI

IP20

150

Adjustable

350-700

LL1x50-E-CC

SELV < 60 V

ON/OFF

IP20

50.4

Adjustable

1050-1400

LL1x50-E-CC-700-1050

SELV < 60 V

ON/OFF

IP20

50.4

Adjustable

700-1050

LL1x80-CC-1400-2100

SELV < 60 V

ON/OFF

IP20

Adjustable

1400-2100

LL2x25-E-CC

SELV < 60 V

ON/OFF

IP20

50.4

Adjustable

350-700

LL1x10-42-E-CC

Non-Isolated

ON/OFF

IP20

Adjustable

120–350

LL1x10-42-CC-350-700

Non-Isolated

ON/OFF

IP20

Adjustable

350-700

LL1x23-80-E-CC

Non-Isolated

ON/OFF

IP20

Adjustable

150–350

LL1x70-E-CC

Non-Isolated

ON/OFF

IP20

Adjustable

350-700

LL1x80-E-CC-350-700

Non-Isolated

ON/OFF

IP20

Adjustable

350-700

LL1x110-E-CC-200-350

Non-Isolated

ON/OFF

IP20

110

Adjustable

200–350

LL1x110-E-CC-350-700

Non-Isolated

ON/OFF

IP20

110

Adjustable

350–700

LL1x150-E-CC

Non-Isolated

ON/OFF

IP20

150

Adjustable

350–700

LL1x21-CC

Basic Isolated

ON/OFF

IP20

Selectable

300/350

LL1x26-CC

Basic Isolated

ON/OFF

IP20

Multiple

300/350

LL1x38-CC

Basic Isolated

ON/OFF

IP20

38.5

Multiple

300/350

LL1x38-CC-350

Basic Isolated

ON/OFF

IP20

350

LL1x54-CC-350

Basic Isolated

ON/OFF

IP20

Fixed Current Fixed Current

Helvar | Data is subject to change without notice. More information at: www.helvar.com

350

Output Voltage [V]

Luminaire Class

Power factor at max. load

Efficiency at max load

Dimensions L x W x H [mm]

Lifetime up to (h)

12-50 (350 mA), 12-50 (700mA)

I, II, III

0.96

0.88

122.9 x 79 x 30

100000

25-100 (350 mA), 25-50 (700 mA)

I, II

0.96

0.88

360 x 30 x 21

100000

20-100 (350 mA), 25-85 (700 mA)

I, II

0.98

0.90

360 x 30 x 21

100000

20-48 (1050 mA), 20-36 (1400 mA)

I, II

0.98

0.88

360 x 30 x 21

100000

20-80 (350 mA), 20-57 (700 mA)

I, II, III

0.96

0.89

184 x 46.5 x 28

100000

20–57 (700 mA), 20–44 (900 mA), 20–38 (1050 mA)

I, II, III

0.96

0.89

184 x 46.5 x 28

100000

25–100 (350 mA), 25–50 (700 mA)

I, II

0.98

0.90

380 x 35 x 21

100000

80–350 (120 mA), 50–120 (350 mA)

I, II

0.96

0.93

280 x 30 x 21

100000

150–350 (150 mA), 64-228 (350 mA)

I, II

0.98

0.95

280 x 30 x 21

100000

50–200 (350 mA), 50–100 (700 mA)

I, II

0.98

0.91

280 x 30 x 21

100000

70-228 (350 mA), 35-114 (750 mA)

I, II

0.98

0.94

280 x 30 x 21

100000

50-220 (350 mA), 35-114 (750 mA)

I, II

0.98

0.94

280 x 30 x 21

100000

120-314 (350 mA), 50-157 (750 mA)

I, II

0.98

0.94

280 x 30 x 21

100000

257-350 (350 mA), 128-214 (700 mA)

I, II

0.98

0.96

360 x 30 x 21

100000

20-48 (1050 mA), 20-36 (1400 mA)

I, II

0.97

0.88

280 x 30 x 21

100000

30-48 (700 mA), 20-48 (1050 mA)

I, II

0.96

0.90

280 x 30 x 21

100000

25-54 (1400 mA), 25-38 (2100 mA)

I, II

0.98

0.91

360 x 30 x 21

100000

20-50 (350 mA), 20-36 (700 mA)

I, II

0.96

0.87

360 x 30 x 21

100000

80–350 (120 mA), 80–300 (140 mA), 30–120 (350 mA)

I, II

0.98

0.94

190 x 30 x 21

100000

28-120 (350 mA), 20-60 (700 mA)

I, II

0.98

0.91

230 x 30 x 21

100000

150–350 (150 mA), 120–350 (200 mA), 120–228 (350 mA)

I, II

0.98

0.95

230 x 30 x 21

100000

50-200 (350 mA), 50-100 (700 mA)

I, II

0.98

0.91

280 x 30 x 21

100000

120-228 (350 mA), 50-114 (700 mA)

I, II

0.98

0.94

280 x 30 x 21

100000

120–350 (200 mA), 120–314 (350 mA)

I, II

0.98

0.95

230 x 30 x 21

100000

120–314 (350 mA), 50–157 (700 mA)

I, II

0.98

0.95

280 x 30 x 21

100000

257–350 (350 mA), 128–214 (700 mA)

I, II

0.98

0.96

280 x 30 x 21

100000

45-65 (300 mA), 40-60 (350 mA)

I, II

0.97

0.86

230 x 30 x 21

100000

20-75

I, II

0.97

0.90

230 x 30 x 21

100000

70–110 (300 mA), 70–110 (350 mA)

I, II, III

0.98

0.89

230 x 30 x 21

100000

80-110

I, II

0.97

0.88

230 x 30 x 21

100000

105-155

I, II

0.96

0.89

230 x 30 x 21

100000

Helvar | Data is subject to change without notice. More information at: www.helvar.com

NON-DIMMABLE CONSTAN CURRENT

COMPACT LED DRIVERS

DIMMABLE DALI / 1-10 V

COMPACT LED DRIVERS Model

Output protection

Control

IP rating

Max. output power [W]

Output type

Output Current (mA)

LC1x25-DA

SELV < 60 V

DALI

IP20

Adjustable

350–700

LC1x35-DA

SELV < 60 V

DALI

IP20

Adjustable

700–1050

LC1x50-E-DA

SELV < 60 V

DALI

IP20 *

50.4

Adjustable

1050–1400

LC1x30-E-DA

SELV < 120 V

DALI

IP20 *

Selectable

350 / 500 / 700

LC1x70-E-DA

SELV < 120 V

DALI

IP20

Adjustable

700–1400

LC1x28-AN

SELV < 60 V

1-10 V

IP20

Multiple

350 / 500 / 700

LC1x30-E-AN

SELV < 120 V

1-10 V

IP20 *

Multiple

350 / 500 / 700

LC1x14-CC-350

SELV < 60 V

ON/OFF

IP20

14.7

350

LC1x20-CC-500

SELV < 60 V

ON/OFF

IP20

Fixed Current Fixed Current

LC1x25-CC

SELV < 60 V

ON/OFF

IP20

25.2

Adjustable

350–700

LC1x30-CC-700

SELV < 60 V

ON/OFF

IP20

30.1

Fixed Current

700

LC1x35-CC

SELV < 60 V

ON/OFF

IP20

35.7

Adjustable

700–1050

LC1x40-CC-1050

SELV < 60 V

ON/OFF

IP20

Fixed Current

1050

LC1x50-E-CC

SELV < 60 V

ON/OFF

IP20

50.4

Adjustable

1050–1400

LL1x12-E-CC-350

SELV < 60 V

ON/OFF

IP20

Single

350

LL1x15-E-CC-500

SELV < 60 V

ON/OFF

IP20

Single

500

LL1x20-E-CC-350

SELV < 60 V

ON/OFF

IP20

Single

350

LL1x20-E-CC-500

SELV < 60 V

ON/OFF

IP20

Single

500

LL1x20-E-CC-700

SELV < 60 V

ON/OFF

IP20

Single

700

LL1x20-E-CC

SELV < 120 V

ON/OFF

IP20 *

Selectable

350 / 500 / 700

LC1x30-E-CC

SELV < 120 V

ON/OFF

IP20 *

Selectable

350 / 500 / 700

LL1x40-E-CC

SELV < 120 V

ON/OFF

IP20

Adjustable

350–1050

LC1x70-E-CC

SELV < 120 V

ON/OFF

IP20

Adjustable

700–1400

*) Coated for challenging climate conditions, see more on page 38

Helvar | Data is subject to change without notice. More information at: www.helvar.com

500

Output Voltage [V]

Luminaire Class

Power factor at max. load

Efficiency at max load

Dimensions L x W x H [mm]

Lifetime up to (h)

9–48 (350 mA), 9–36 (700 mA)

I, II, III

0.97

0.89

106 x 67 x 28

100000

20–48 (700 mA), 20–34 (1050 mA)

I, II, III

0.97

0.89

106 x 67 x 28

100000

20–48 (1050 mA), 20–36 (1400 mA)

I, II, III

0.98

0.88

125 x 81 x 30

100000

10–60 (350 mA), 10–60 (500 mA) ,10–43 (700 mA)

I, II, III

0.96

0.87

106 x 67 x 28

100000

30–100 (700 mA), 30–50 (1400 mA)

I, II, III

0.98

0.91

143.6 x 71.3 x 30

100000

10-50 (350 mA), 10-50 (500 mA), 10-40 (700 mA)

I, II, III

0.96

0.86

106 x 67 x 28

100000

10-60 (350 mA), 10-60 (500 mA), 10-43 (700 mA)

I, II, III

0.96

0.87

106 x 67 x 28

100000

31-42

I, II, III

0.95

0.89

115 x 45 x 29

50000

31-42

I, II, III

0.95

0.89

115 x 45 x 29

50000

20–45 (350 mA), 20–36 (700 mA)

I, II, III

0.97

0.89

106 x 67 x 28

100000

24-43

I, II, III

0.95

0.89

115 x 45 x 29

50000

20–48 (700 mA), 20–34 (1050 mA)

I, II, III

0.97

0.90

106 x 67 x 28

100000

24-38

I, II, III

0.95

0.89

115 x 45 x 29

50000

20–48 (1050 mA), 20–36 (1400 mA)

I, II, III

0.98

0.90

125 x 81 x 30

100000

8.4–36

I, II, III

0.50c

0.83

123 x 45 x 19

30000

8–30

I, II, III

0.50c

0.85

123 x 45 x 19

30000

16–57

I, II, III

0.50c

0.85

123 x 45 x 19

30000

14–40

I, II, III

0.50c

0.88

123 x 45 x 19

30000

8–29

I, II, III

0.50c

0.87

123 x 45 x 19

30000

10–57 (350 mA), 10–40 (500 mA), 10–28 (700 mA)

I, II, III

0.90c

0.89

184 x 40 x 25.2

30000

10–60 (350 mA), 10–60 (500 mA), 10–43 (700 mA)

I, II, III

0.96

0.88

106 x 67 x 28

100000

20–80 (350 mA), 20–57 (700 mA), 20–38 (1050 mA)

I, II, III

0.95

0.90

184 x 46.5 x 28

100000

30–100 (700 mA), 30–50 (1400 mA)

I, II, III

0.98

0.91

143.6 x 71.3 x 30

100000

Helvar | Data is subject to change without notice. More information at: www.helvar.com

OUTDOOR, CONSTANT VOLTAGE & ACTIVE+ DRIVERS Output protection

Control

IP rating

Max. output power [W]

Output type

Output Current (mA)

OL1x50-E-CC-1050

Isolated

ON/OFF

IP67

50.4

1050

OL1x50-E-CC-1400

Isolated

ON/OFF

IP67

50.4

Fixed Current Fixed Current

SELV < 60 V

ON/OFF

IP65

Multiple

350 / 700 / 1400

OL1x100-E-CC1

Isolated

ON/OFF

IP65

105

Multiple

700 / 1050

OL1x100-E-CC2

Isolated

ON/OFF

IP65

105

Multiple

1400 / 2100

LL1x30-CV12

SELV < 60 V

ON/OFF (DALI*)

IP20

0-2500

LL1x75-CV12

SELV < 60 V

ON/OFF (DALI*)

IP20

LL1x30-E-CV24

SELV < 60 V

ON/OFF (DALI*)

IP20

OL1x30-E-CV24

SELV < 60 V

ON/OFF (DALI*)

IP67

LL1x75-E-CV24

SELV < 60 V

ON/OFF (DALI*)

IP20

OL1x75-E-CV24

SELV < 60 V

ON/OFF (DALI*)

IP67

LL1x120-CV24

SELV < 60 V

ON/OFF (DALI*)

IP20

120

Constant Voltage Constant Voltage Constant Voltage Constant Voltage Constant Voltage Constant Voltage Constant Voltage

LC1x25 Active+

SELV60

Active+

IP20

25.2

Adjustable

350-700

LC1x35 Active+

SELV60

Active+

IP20

35.7

Adjustable

700-1050

Non-isolated

Active+

IP20

Adjustable

120-350

LC1x50 Active+

SELV60

Active+

IP20

Adjustable

1050-1400

LL1x50 Active+

SELV60

Active+

IP20

50.4

Adjustable

1050-1400

LL1x23-80 Active+

Non-isolated

Active+

IP20

Adjustable

150-350

LL1x80-350-700 Active+

Non-isolated

Active+

IP20

Adjustable

350-700

LL1x110 Active+

Non-isolated

Active+

IP20

110

Adjustable

350-700

SMART LUMINAIRE SOLUTIONS ACTIVE+

CONSTANT VOLTAGE LED DRIVERS

OUTDOOR LED DRIVERS

Model

OL1x60-E-CC

LL1x10-42 Active+

*) DALI with LL1-CV-DA DALI LED driver extension

Helvar | Data is subject to change without notice. More information at: www.helvar.com

1400

0-6250 0-1250 0-1250 0-3125 0-3125 0-5000

Output Voltage [V]

Luminaire Class

Power factor at max. load

Efficiency at max load

Dimensions L x W x H [mm]

Lifetime up to (h)

20-48

I, II

0.98

0.89

300 x 40 x 23

50000

20-36

I, II

0.98

0.88

300 x 40 x 23

50000

60-90 (350 mA), 35-90 (700 mA), 35-40 (1400 mA)

I, II

0.98

0.90

149 x 53 x 35

50000

70-120 (700 mA), 70-100 (1050 mA)

I, II

0.98

0.91

234 x 53 x 35

50000

30-72 (1400 mA), 30-48 (2100 mA)

I, II

0.98

0.90

234 x 53 x 35

50000

I, II, III

0.95

0.83

153 x 41 x 32

30 000

I, II, III

0.95

0.84

180 x 52 x 30

30000

I, II, III

0.95

0.86

131 x 34 x 42

30000

I, II, III

0.95

0.87

131 x 34 x 42

30000

I, II, III

0.95

0.88

180 x 52 x 30

30000

I, II, III

0.95

0.88

155 x 50 x 32

30000

I, II, III

0.95

0.88

300 x 40 x 30

30000

9–48 (350 mA), 9–36 (700 mA)

I, II, III

0.95

0.87

106 x 28 x 67

100000

9–48 (700 mA), 9–34 (1050 mA)

I, II, III

0.96

0.88

106 x 28 x 67

100000

80–350 (120 mA), 50–120 (350 mA)

I, II

0.96

0.93

280 x 30 x 21

100000

20–48 (1050 mA), 20–36 (1400 mA)

I, II, III

0.98

0.87

125 x 81 x 30

100000

20–48 (1050 mA), 20–36 (1400 mA)

I, II, III

0.98

0.88

360 x 30 x 21

100000

150–350 (150 mA),64–228 (350 mA)

I, II

0.98

0.94

280 x 30 x 21

100000

71–228 (350 mA),35–114 (700 mA)

I, II

0.98

0.94

280 x 30 x 21

100000

120–314 (350 mA),50–157 (700 mA)

I, II

0.98

0.95

280 x 30 x 21

100000

Helvar | Data is subject to change without notice. More information at: www.helvar.com

TOOLS & SOFTWARE

Helvar has representatives all over the world. For additional information, please visit helvar.com/contact-us

Due to a policy of continuous improvement, Helvar reserve the right to alter specifications without notice at anytime. Cover picture: Helvar / Johan Stenberg Picture on page 3: Ossip van Duivenbode / Markthal, Rotterdam

REF MAC 24 017 1A English 11.9.2017