The Startup Process of Hardwood Flooring Is Explained To bring grandeur to the looks of your house flooring plays a very important part. The traditional tiles, marble and granite flooring is being rapidly replaced by Hardwood Flooring. Wood flooring's are used in many ways. Some are used in the houses which have proper basement. This implies that the wood flooring is fixed to the ground. In some cases wood flooring is also done to separate floors in one single room as per the requirement of the family. There are majorly two types of wood flooring. These are classified as solid wood flooring and engineered wood flooring. Solid hardwood flooring is easy to install as compared to the later one. Fixation Procedure: The fixation procedure of hardwood flooring refinishing which is of the solid category is easy and can be done by the owner himself. Before the fixation process the sub flooring has to be done and all the other materials including the wooden planks have to be procured. The size of the planks has to be similar and any anomaly can lead to difficulties during the fixing process. Masks should be kept handy to ward off any inhalation of dusts. Knee pads have to be worn to relieve the knees from getting hurt. Along with all the materials a measuring tape as well glue proves to be very handy in the process of Hardwood Flooring. The Startup Process:
•
A good amount of time that is at least three days should be given to the wooden planks to get accustomed to the temperature of the room. This would ensure that the factor of moisture content and would contribute towards smooth fixing.
•
The sub floor which lies beneath the Hardwood Flooring refinishing has to have the same level of moisture as that of the wooden planks. If there is difference in the moisture level in between these two floors then an expert’s advice should be sought.
•
The subfloor should be cleaned before fixing the wooden planks. The defects should be monitored very carefully in all the wooden planks. If the defects are greater than five percent then the fixation process should not be initiated at all. An expert should be called for.
•
After checking all the factors if the condition is favorable for installation then as per the manufacturer’s instructions a felt or rosin should be applied to the sub floor. After this application the main process of installation should start.
•
At first the first row of planks has to be fixed properly and then the other rows would follow.
Hardwood Flooring Refinishing Chicago can be done by the individual himself but that might lead to some mistakes. These mistakes would not have the desired effects. To get the best out of solid hardwood flooring an expert has to be hired to carry out the process. To know in detail clicking the link below would prove to be fruitful: http://allstatehardwoodflooring.com/hardwood-flooringrefinishing-chicago.html