PDF DOWNLOAD ATLAS COPCO XAH 1066 Cd - XAH 2250 CD6 PORTABLE COMPRESSOR PARTS MANUAL by www.heydownloads.com

Parts List for Portable Compressor English

XAH 1066 Cd - XAH 2250 CD6

Engine CAT C13

XAH 1066 Cd - XAH 2250 CD6

Engine CAT C13

Parts Index ............................................................................................... 5 Warranty and Liability ............................................................................ 9 Safety Precautions for Portable Compressors .....................................11 Ordering Spare Parts............................................................................. 15 Parts Lists ............................................................................................... 20

Printed Matter N° ATLAS COPCO - PORTABLE AIR DIVISION www.atlascopco.com

2955 1610 00 04/2008

-4-

PARTS INDEX

PART

PAGE

A ADAPTER .............................................................................64, 98, 99, 138 ADDITIONAL FUEL FILTER .......................................................144, 145 AFTERCOOLER ......................................................................................54 AIR DUCT ................................................................................................48 AIR FILTER ..........................................................................52, 82, 84, 144 AIR FILTER AND COOLER PLATE ....................................82, 83, 84, 85 AIR FILTER ELEMENT ......................................................52, 82, 84, 144 AIR FILTER SAFETY CARTRIDGE ......................................................82 AIR INLET..........................................................................................48, 49 AIR OUTLET....................................................................41, 54, 55, 60, 61 ANCHOR PLATE .....................................................................86, 110, 140 ANTENNA......................................................................................134, 135

B BAFFLE .......................................... 116, 117, 122, 123, 124, 125, 127, 128 BALL BEARING ......................................................................52, 113, 144 BALL CAGE...................................................................................103, 147 BALL VALVE .......................................................................54, 60, 68, 136 BATTERY .........................................................................................39, 132 BATTERY CABLE ...................................................................................66 BATTERY SWITCH .................................................................................66 BEAM................................................................................................42, 110 BEND ........................................................................................................70 BLEEDER VALVE ASSEMBLY .....................................................54, 105 BLEEDER VALVE HOUSING ..............................................................105 BOX.....................................................................................................74, 92 BUFFER ..............................................................................................98, 99 BUSHING .............................................................35, 52, 71, 136, 138, 144

C CABLE ........................................................................39, 66, 112, 132, 133 CABLE CLAMP .......................................................................................68 CABLE GLAND .....................................................................................106 CABLE GUIDE.........................................................................................86 CABLE STRIP ........................................................................110, 134, 135 CABLE TIE.......................................................................................86, 140 CAP .............................................................................................56, 74, 110 CHAIN ................................................................................................70, 71 CHECK VALVE ........................................................................................41 CIRCLIP..........................................................................................100, 113 CIRCUIT BREAKER ........................................................ 66, 88, 106, 140

PART

PAGE

CLAMP ................................................................. 39, 44, 48, 54, 60, 72, 86 CLAMP PIPE ......................................................................................54, 60 CLAMP RING ........................................................................................ 113 CLAMPING ........................................................................................86, 87 COMPRESSOR DRIVE ...........................................................................35 COMPRESSOR OIL..................................................................... 26, 24, 25 CONNECTION ....................................................................................... 133 CONNECTOR ASSEMBLY.....................................................................66 CONTACT BLOCK..................................................................................88 CONTAINER ......................................................................................56, 74 CONTAINER ASSEMBLY .................................................... 56, 57, 74, 75 CONTROL BOX............................................................................... 38, 112 CONTROL MODULE ..............................................................................38 COOLER ................................................................................. 101, 110, 111 COOLER AND FAN.................................................................................58 COOLER AND FAN ASSEMBLY......................................................... 101 CORE PLUG........................................................................................... 107 COSMOS ........................................................................................134, 135 COSMOS MODULE ......................................................................134, 135 COUPLING....................................................................................... 37, 141 COVER ............................... 38, 82, 108, 109, 110, 112, 119, 132, 136, 140 COVER PROTECTION ................................................................... 54, 102 COVER VALVE..............................................................................103, 147 COWL ..................................................................................................... 110 COWL FAN ..............................................................................................54 CROSS .................................................................................................... 138 CUBICLE.......................................................................................... 92, 106

D DECAL.............................................................................................. 76, 131 DECAL ASSEMBLY...................................................................... 112, 131 DECAL UNIT .....................................................................................78, 80 DISPLAY ................................................................................................ 112 DISTANCE PIECE ...................................................................................66 DISTANCE SLEEVE.................................................................. 98, 99, 132 DOOR........................................ 56, 115, 117, 122, 123, 124, 125, 126, 127 DOOR ASSEMBLY............ 56, 74, 116, 122, 123, 124, 125, 126, 127, 128 DRAINS ..............................................................................................68, 69 DRIVE SHAFT .........................................................................................35

-5-

PART

PAGE

E EARTHING STRAP ................................................................................. 66 ELBOW .......................................................................... 52, 54, 70, 71, 144 ELBOW PIPE COUPLING ........................................................ 54, 64, 138 ELECTRICAL SYSTEM ................................................. 66, 67, 88, 89, 92 ELEMENT AND MOUNTS .................................................................... 34 ELEMENT MOUNTING ................................................................... 32, 33 EMERGENCY STOP ............................................................................... 88 END SECTION....................................................................................... 106 ENGINE.................................................................................................... 42 ENGINE AND ACCESSORIES ........................................................ 42, 43 ENGINE COOLANT................................................................................ 27 ENGINE COOLING........................................................................... 46, 47 ENGINE OIL ...................................................................................... 22, 23 EXHAUST .............................................................................. 44, 45, 72, 73

F FAN ................................................................................................... 54, 113 FAN DRIVE ASSEMBLY ............................................................. 101, 113 FAN SHAFT ........................................................................................... 113 FAN SHAFT ASSEMBLY ..................................................................... 113 FLANGE ............................................................................................. 40, 50 FLASH LIGHT ......................................................................................... 88 FLEXIBLE........................................................................................ 90, 142 FUEL COOLER................................................................................ 52, 144 FUEL FILTER........................................................................................... 52 FUEL FUNNEL ................................................................................ 62, 104 FUEL GAUGE........................................................................................ 112 FUEL HOSE ............................................................................... 52, 62, 136 FUEL SYSTEM ...................................................................... 52, 53, 62, 63

G GEAR WHEEL......................................................................................... 96 GEARS...................................................................................................... 96 GRATING ..................................................................................... 58, 56, 74 GROMMET .......................................................................... 56, 74, 88, 110 GUARD ................................................................................ 35, 58, 54, 110 GUIDE ........................................................................................ 66, 86, 140

PARTS INDEX

PART

PAGE

H HEXAGON PLUG ....35, 36, 40, 50, 41, 68, 93, 94, 95, 100, 108, 109, 110 HINGE..................................................... 112, 115, 116, 122, 123, 126, 127 HOLDER .............................................................................................58, 88 HORN ........................................................................................................88 HOSE...................................46, 48, 41, 52, 66, 68, 110, 133, 136, 144, 141 HOSE ASSEMBLY ...........................................50, 41, 64, 68, 90, 138, 142 HOSE CLAMP ..............................................46, 48, 52, 110, 133, 136, 144 HOSE CLIP .........................................................................................70, 71 HOSE COUPLING............................................................................62, 144 HOUSE MARK .........................................................................................76 HOUSING ...................................................................36, 50, 100, 112, 113 HOUSING FILTER .........................................................................103, 147 HOUSING VALVE..........................................................................103, 147 HUMP HOSE ............................................................................................48

I INFORMATION LABEL..........................................76, 78, 80, 82, 84, 146 INSTRUCTION LABEL.....................................................................78, 80 INSULATING HOSE ..................................................................41, 64, 138 INSULATION THERMAL .................................................................44, 72 ISOLATOR ................................................................................................66

L LABEL ....................................................................................62, 76, 78, 80 LAMP SOCKET........................................................................................88 LEVEL GAUGE..................................................................................98, 99 LEVEL SENSOR ..............................................................................52, 144 LEVEL SWITCH ....................................................................................110 LEVER ....................................................................................................113 LID OF POWER SUPPLY BOX...............................................................97 LOCK .............................................. 112, 115, 116, 123, 124, 125, 126, 127 LOCK SPRING .......................................................................................105 LOCKING PLATE ....................................................................................35

M MANIFOLD ......................................................................................52, 144 MARKINGS ................................................................76, 77, 78, 79, 80, 81 MEMBRANE ..................................................................................103, 147 MINIMUM PRESSURE VALVE........................................................70, 71 MOUNTING RAIL .................................................................................106

PART

PAGE

MUFFLER...........................................................................................44, 72

N NIPPLE ASSEMBLY .......................................................................52, 144 NON-RETURN VALVE .........................................................................138

O OIL NOZZLE............................................................................................35 OIL PUMP...............................................................................................141 OIL SEPARATOR .....................................................................................30 OIL SEPARATOR ASSEMBLY .....................................94, 95, 98, 99, 146 OIL SEPARATOR ASSEMBLY & REGULATING VALVE ..94, 95, 146 OIL STOP VALVE ....................................................................................31 OIL SYSTEM......................................................................50, 51, 136, 137 OIL COOLER .........................................................................................110 OIL FILTER ........................................................................................70, 71

P PAD .............................................................................................54, 60, 110 PANEL......................................................................... 56, 74, 116, 117, 128 PANEL ASSEMBLY............. 56, 60, 74, 102, 114, 118, 119, 120, 121, 130 PARALLEL KEY................................................................................37, 42 PARALLEL PIN........................................................................................35 PARCOOL EG ..........................................................................................27 PAROIL .............................................................................22, 23, 26, 24, 25 PIN GROOVED ..................................................................................56, 74 PIPE.....................................44, 46, 41, 54, 56, 59, 60, 62, 72, 74, 110, 133 PIPE AIR INLET ..............................................................................48, 133 PIPE AIR OUTLET ............................................................................54, 60 PIPE CLAMP ................................46, 52, 66, 68, 70, 71, 86, 136, 138, 140 PIPE COUPLING..................................................................41, 54, 60, 138 PIPE RADIATOR......................................................................................46 PISTON ...................................................................................................100 PLASTIC TUBE .........................................................54, 64, 136, 138, 140 PLATE ...................................................34, 54, 56, 60, 74, 82, 84, 104, 106 ......................................................... 110, 112, 115, 116, 122, 123, 127, 130 PLUG...........................................................56, 59, 74, 93, 94, 95, 100, 107 POINTER ................................................................................................113 POWER SUPPLY BOX ............................................................................97 POWER SUPPLY BOX ASSEMBLY ................................................66, 97 PREHEATER ..........................................................................................140

-6-

PART

PAGE

PRESSURE GAUGE .............................................................................. 112 PRESSURE SENSOR............................................................. 54, 66, 70, 71 PRESSURE VESSEL ASSEMBLY.................................... 98, 99, 108, 109 PRINTED CIRCUIT BOARD ................................................................ 112 PROTECTION CAP ................................................................. 66, 106, 140 PROTECTION PLUG....................................................... 62, 66, 93, 94, 95 PROTECTIVE COLLAR ......................................................................... 88 PULLEY.................................................................................................... 42

Q QUICK COUPLING ....................................................................... 104, 141

R RADIATOR............................................................................................. 110 REDUCER .............................................................................................. 100 REDUCER FOR SCAVENGE PIPE ................................................ 64, 138 REGULATING SYSTEM ...................... 64, 65, 90, 91, 138, 139, 142, 143 REGULATING VALVE........................................ 29, 94, 95, 103, 146, 147 RELAY .............................................................................. 66, 106, 133, 140 RESISTOR .............................................................................................. 140 RESTRICTOR........................................................................................... 54 RETAINER ....................................................................... 35, 56, 74, 98, 99 RING ......................................................................................................... 35 ROLLER BEARING................................................................................. 35 ROOF ...................................................................... 114, 118, 120, 121, 129 ROOF ASSEMBLY.......................................................................... 74, 129 RUBBER BUFFER................................................................................... 42 RUBBER PLUG ........................................................................... 58, 94, 95 RUBBER RING ........................................................................................ 62 RUBBER TUBE ......................................................................... 70, 71, 110

S SAFETY VALVE ................................................................................ 70, 71 SCREEN.................................................................................................. 112 SELECTOR SWITCH ..................................................................... 88, 112 SEPARATOR ............................................................................................ 54 SERVICE KIT............................................................. 28, 29, 30, 31, 32, 33 SERVICE PAK .................................................................................... 20, 21 SET...................................................................................................... 82, 84 SHIELD..................................................................................................... 42 SILENCER........................................................................................ 54, 146

PARTS INDEX

PART

PAGE

S SKID..........................................................................................................40 SOCKET....................................................................................................54 SOLENOID VALVE .................................................................64, 138, 146 SPACER .......................................................................................... 112, 113 SPHERICAL ROLLER BEARING ..........................................................35 SPRING ...................................................................................................105 SPRING GUIDE .....................................................................100, 103, 147 SPRING PIN ...........................................................................................113 SPRING SEAT ................................................................................103, 147 STRAIGHT PIPE-COUPLING...............................................................146 STRAINER.........................................................................................41, 54 STREET TEE ......................................................................................94, 95 STRIP ........................................................................................................66 SUPPORT............................................34, 48, 41, 52, 54, 56, 62, 66, 74, 86 ............................................................. 88, 92, 110, 113, 132, 136, 140, 144 SWITCH....................................................................................62, 104, 106

PART

PAGE

V-BELT .....................................................................................................42 VESSEL ..........................................................................................108, 109 VIBRATING DAMPER............................................................................34

W WARNING MARK ...................................................................................97 WARNING SWITCH................................................................................48 WIRE...................................................................................................66, 88 WIRE HARNESS ......................................................... 54, 66, 88, 112, 146 WIRE MESH HOSE ...........................................................................70, 71 WIRING .......................................................................... 110, 134, 135, 140

T TANK FUEL .............................................................................................40 TANK OIL...............................................................................................136 TEE....................................................................................................64, 138 TEMPERATURE SENSOR ................................................................54, 66 TENSION PULLEY................................................................................113 TENSION PULLEY ASSEMBLY..........................................................113 TENSIONER ...........................................................................................113 TERMINAL ............................................................................................106 THERMOSTAT ...................................................................................70, 71 TIME RELAY .........................................................................................140 TIMER RELAY.......................................................................................106 TUBE...................................................................................................98, 99

U UNLOADER ASSEMBLY .....................................................................107 UNLOADING VALVE .............................................................................28

V VALVE ..............................................................62, 104, 105, 107, 133, 136 VALVE OILSTOP ...................................................................................100 VALVES ON ELEMENT..........................................................................36 VALVES ON VESSEL........................................................................70, 71

-7-

PART

PAGE

-8-

INSTRUCTION MANUAL

Warranty and Liability Limitation Use only authorized parts. Any damage or malfunction caused by the use of unauthorized parts is not covered by Warranty or Product Liability. The manufacturer does not accept any liability for any damage arising for modifications, additions or conversions made without the manufacturer's approval in writing. Copyright 2004, Atlas Copco Airpower n.v., Antwerp, Belgium. Any unauthorized use or copying of the contents or any part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers and drawings Garantie- en aansprakelijkheidsbepalingen Gebruik alleen originele onderdelen. Beschadigingen of defecten die het gevolg zijn van het gebruik van niet originele onderdelen vallen niet onder garantie of productaansprakelijkheid. De producent is niet aansprakelijk voor enige schade veroorzaakt door modificatie, toevoeging of ombouw, gemaakt zonder de schriftelijke toestemming van de fabrikant. Copyright 2004, Atlas Copco Airpower n.v., Antwerpen, België. Het is niet toegestaan om zonder toestemming de inhoud geheel of gedeeltelijk te kopiëren of anderszins te gebruiken. Dit betreft vooral trademarks, modelbenamingen, onderdeelnummers en tekeningen. Limitation de garantie et de responsabilité Utiliser uniquement les pièces homologuées. Tout dommage ou mauvais fonctionnement dû à l’utilisation de pièces non homologuées n’est pas couvert par la garantie ou la responsabilité des produits défectueux. Le fabriquant décline toute responsabilité en cas de dommage faisant suite à des modifications, des ajouts ou des conversions effectués sans l’accord écrit du fabriquant. Copyright 2004, Atlas Copco Airpower n.v., Antwerp, Belgique. Toute utilisation ou copie du contenu, ou d’une parte de celui-ci, non autorisée est interdite. Cette interdiction s’applique en particulier aux marques de commerce, aux dénominations des modèles, aux numéros des pièces et aux schémas. Garantie- und Haftungseinschränkungen Nur zugelassene Teile verwenden. Jede Beschädigung oder Fehlfunktion, die durch die Verwendung von nicht zugelassenen Teilen verursacht wurde, ist nicht durch die Garantie oder Produkthaftung abgedeckt. Der Hersteller übernimmt keine Haftung für Schäden, die durch Modifizierungen, Ergänzungen oder Funktionsänderungen entstehen, die ohne schriftliche Zustimmung des Herstellers erfolgt sind. Urheberrecht 2004, Atlas Copco Airpower n.v., Antwerpen, Belgien. Jede nicht genehmigte Verwendung oder Kopie des Inhaltes oder von Teilen ist untersagt. Das bezieht sich im Einzelnen auf Warenzeichen, Modellbezeichnungen, Teilenummern und Zeichnungen

Limitación de garantía y responsabilidad Use sólo piezas autorizadas. La garantía o responsabilidad del producto no cubre ningún daño o funcionamiento defectuoso provocado por el uso de piezas no autorizadas. El fabricante no acepta ninguna responsabilidad por los daños provocados por modificaciones, adiciones o conversiones realizadas sin la aprobación por escrito del fabricante. Derechos de reproducción 2004, Atlas Copco Airpower n.v., Amberes, Bélgica. Está prohibida toda utilización o reproducción total o parcial no autorizada de estos contenidos, en especial de las marcas registradas, denominaciones de modelos, números de piezas y planos Begränsningar av garanti och ansvarsskyldighet Använd endast godkända delar. Den skada eller funktionsoduglighet som förorsakats av att ej godkända delar har använts, täcks inte av garantin eller produktansvaret. Tillverkaren accepterar ingen ansvarsskyldighet för skador som uppstått efter att ändringar, tillägg eller ombyggnader gjorts utan skriftligt tillstånd från tillverkaren. Copyright 2004, Atlas Copco Airpower n.v., Antwerpen, Belgien. Ej auktoriserad användning eller kopiering av innehållet, eller delar av det, är förbjuden. Detta gäller speciellt varumärken, modellbeteckningar, reservdelsnummer och ritningar. Limitazione di Garanzia e di Responsabilità Usare solo componenti autorizzati. Qualsiasi danno o malfunzione causati dall'uso di componenti non autorizzati non è coperto dalla Garanzia o dalla Responsabilità sul Prodotto. Il fabbricante non accetta alcuna reponsabilità per danni derivanti da modifiche, aggiunte o trasformazioni effettuate senza l'approvazione scritta del fabbricante. Copyright 2004, Atlas Copco Airpower n.v., Anversa, Belgio. Sono vietati ogni uso o copia non autorizzati del contenuto o di qualsiasi parte dello stesso. Ciò si applica in particolare ai marchi, alle denominazioni dei modelli, ai numeri dei componenti ed ai disegni

Εγγύηση και Περιορισµός Ευθύνης Χρησιµοποιήστε µόνο εγκεκριµένα εξαρτήµατα. Οποιαδήποτε ζηµιά ή δυσλειτουργία προκληθεί από τη χρήση µη εγκεκριµένων εξαρτηµάτων δεν καλύπτεται από την εγγύηση και την ευθύνη για το προϊόν. Ο κατασκευαστής δεν αποδέχεται καµία ευθύνη για ζηµιές που προκύπτουν από τροποποιήσεις, προσθήκες ή µετατροπές που έγιναν χωρίς τη γραπτή έγκριση του κατασκευαστή. Copyright 2004, Atlas Copco Airpower n.v., Αµβέρσα, Βέλγιο. Απαγορεύεται οποιαδήποτε χρήση ή αντιγραφή του περιεχόµενου ή οποιουδήποτε τµήµατος του παρόντος χωρίς εξουσιοδότηση. Αυτό ισχύει συγκεκριµένα για εµπορικά σήµατα, ονοµασίες µοντέλων, κωδικούς εξαρτηµάτων και σχέδια. Garanti og ansvarsbegrensning Bruk kun autoriserte deler. Enhver skade eller funksjonsfeil som skyldes bruk av uautoriserte deler dekkes ikke av garanti eller produktansvar. Fabrikanten aksepterer intet ansvar for noen skade som oppstår på grunn av modifikasjoner, tilføyelser eller forandringer som er gjort uten fabrikantens skriftlige tillatelse. Copyright 2004, Atlas Copco Airpower n.v., Antwerpen, Belgia. All uautorisert bruk eller kopiering av innholdet eller en del av det er forbudt. Dette gjelder særlig varemerker, modellbenevnelser, delenumre og tegninger. Takuun ja vastuuvelvollisuuden rajoitus Käytä vain valmistajan hyväksymiä varaosia. Takuu ja tuotevastuu eivät kata vahinkoja tai toimintahäiriöitä, joiden syynä on muiden kuin hyväksyttyjen varaosien käyttö. Valmistaja ei vastaa vahingoista, jotka aiheutuvat ilman valmistajan kirjallista lupaa tehdyistä muutoksista tai lisäyksistä. Copyright 2004, Atlas Copco Airpower n.v., Antwerpen, Belgia. Sisällön osittainenkin käyttö tai kopiointi ilman lupaa on kielletty. Tämä koskee erityisesti tavaramerkkejä, mallien nimiä, osanumeroita ja piirustuksia.

Garanti- og ansvarsbegrænsning Brug kun tilladte reservedele. Enhver skade eller fejlfunktion, forårsaget af brug af ikke tilladte reservedele, omfattes ikke af garantien eller produktansvaret. Fabrikanten kan ikke drages til ansvar for nogen skade som følge af ændringer, udvidelser eller ombygninger, der er blevet udført uden fabrikantens skriftlige samtykke.

Izmantot tikai ieteiktâs rezerves daïas. Ðî garantija nesedz bojâjumus vai disfunkciju, kuri ir raduðies neatïautu rezerves daïu izmantoðanas rezultâtâ. Raþotâjs nepieòem pretenzijas par bojâjumiem, kas izriet no modifikâcijâm, papildinâjumiem vai pârveidojumiem bez raþotâja rakstiskas piekriðanas.

Copyright 2004, Atlas Copco Airpower n.v., Antwerpen, Belgien. Enhver uautoriseret brug eller kopiering af indholdet eller dele deraf er forbudt. Dette gælder især varemærker, modelbenævnelser, delnumre og tegninger.

Autortiesîbas 2004, Atlas Copco Airpower n.v., Antverpene, Beïìija. Jebkura neatïautâ ðî satura izmantoðana vai kopçðana ir aizliegta.Tas konkrçti attiecas uz tirdzniecîbas markâm, modeïu denominâcijâm, daïu numuriem un rasçjumiem.

-9-

Garantijas un atbildîbas ierobeþojumi

XAH 1066 Cd - XAH 2250 CD6

Limites de Garantia e Responsabilidade Utilize apenas peças autorizadas. Avarias ou defeitos de funcionamento que sejam causados pelo uso de sobresselentes ou componentes não autorizados não serão cobertos pela Garantia ou pela Responsabilidade de Produto. O fabricante não aceita qualquer responsabilidade por quaisquer danos resultantes de modificações, adições ou conversões efectuadas sem a aprovação escrita do fabricante. Copyright 2004, Atlas Copco Airpower n.v., Antuérpia, Bélgica. Qualquer uso não autorizado ou cópia do conteúdo ou de qualquer parte dele é proibida. Isto aplica-se em particular a marcas registadas, denominações de modelos, números de peças e desenhos. 有限担保和责任只允许使用经认可的零件。因使用未经认可的零件而导致的任何损坏或故障不在本担保或产品责任所保障的范围之内。未经制造商书面许可，制造商概不负责因擅自对设备进行改动、添加附件或改型而导致的设备损坏。版权 2004，比利时安特卫普 Atlas Copco Airpower n.v.。未经许可，禁止使用或复制本手册中所含的全部或任何一部分内容。本公告特别适用于本手册所含的商标、型号名称、零件代号和图纸。 A garancia és felelősség korlátozása Csak jóváhagyott alkatrészeket használjon! A nem jóváhagyott alkatrészek használatából adódó sérülésekre és üzemzavarra nem terjed ki a garancia és a termékfelelősség. A gyártó semminemű felelősséget nem vállal a gyártó írásos jóváhagyása nélkül végzett bármilyen módosításokból, kiegészítésekből vagy átalakításokból adódó sérülésekért. Copyright 2004, Atlas Copco Airpower n.v., Antwerp, Belgium. A kézikönyv tartalma vagy annak egy részének engedély nélküli felhasználása vagy másolása tilos. Ez vonatkozik különösen a védjegyekre, a típusjelölésekre, cikkszámokra és rajzokra. Záruka a obmedzenia zodpovednosti výrobcu Používajte len schválené súčiastky. Akákoľvek škoda alebo porucha spôsobená použitím neschválených súčiastok nie je zahrnutá v záruke ani zodpovednosti výrobcu za škodu. Výrobca nepripúšt’a žiadnu zodpovednost’ za akékoľvek škody vzniknuté úpravou, pridaním alebo prerobením, ktoré boli vykonané bez predchádzajúceho písomného súhlasu výrobcu.

Autorské práva 2004, Atlas Copco Airpower n.v., Antverpy, Belgicko. Akékoľvek neoprávnené použitie alebo kopírovanie obsahu, alebo jeho časti je zakázané. Toto sa vzt’ahuje najmä na obchodné značky, modelové označenia, čísla súčiastok a nákresy. Garantii ja piiratud vastutus Kasutage ainult valmistaja poolt aktsepteeritud varuosi. Mis tahes vigastus või rike, mille on põhjustanud valmistaja poolt aktsepteerimata varuosa kasutamine, ei kuulu toote garantii või tootja vastutuse alla. Valmistaja ei aktsepteeri ühtegi riket, mis on tekkinud toote modifitseerimisest, lisandustest või ümberehitamisest, mida valmistaja ei ole kirjalikult heaks kiitnud. Copyright 2004, Atlas Copco Airpower n.v., Antwerp, Belgium. Käesoleva juhendi mistahes loata kasutamine või kopeerimine on keelatud. See kehtib nii kaubamärkide, mudeli nimetuste, varuosade numbrite kui ka jooniste kohta. Ограничение гарантии и ответственности Используйте компоненты только авторизованных поставщиков. Не распространяется гарантия и ответственность за продукцию при любых повреждениях или неисправностях в результате использования неавторизованных компонентов. Производитель не несет никакой ответственности за любые повреждения, возникшие в результате модификации, дополнения или изменения, выполненные без письменного утверждения производителя. Copyright 2004, Atlas Copco Airpower n.v., Антверпен, Бельгия. Запрещается любое несанкционированное использование или копирование содержания этих материалов или их части. В особенности это относится к торговым маркам, обозначениям моделей, номерам деталей и чертежам. Gwarancja i ograniczenie odpowiedzialności Stosować jedynie oryginalne części zamienne. Jakiekolwiek uszkodzenia lub niesprawności spowodowane stosowaniem niezaaprobowanych części zamiennych nie są objęte gwarancją lub odpowiedzialnością za produkt. Producent nie będzie ponosił żadnej odpowiedzialności za jakiekolwiek szkody spowodowane modyfikacjami, dodatkami lub zmianami wykonanymi bez pisemnej zgody producenta. Copyright 2004, Atlas Copco Airpower n.v., Antwerpia, Belgia. Wszelkie stosowanie lub kopiowanie zawartości lub jakiejkolwiek części publikacji bez zezwolenia jest zabronione. Dotyczy to szczególnie znaków handlowych, oznaczeń modeli, numerów części oraz rysunków.

- 10 -

Omezení záruky a odpovědnosti Používejte pouze takové součásti, které jsou schválené výrobcem zařízení. Jakékoliv poškození nebo závady způsobené použitím součástí, které nebyly schválené výrobcem zařízení, nejsou kryty zárukou, nebo odpovědností za výrobek. Výrobce nepřijímá žádnou odpovědnost za jakékoliv škody, způsobené modifikacemi, doplňky nebo přestavbami zařízení provedenými bez předchozího písemného svolení. Copyright 2004, Atlas Copco Airpower n.v., Antverpy, Belgie. Jakékoliv neoprávněné použití nebo kopírování obsahu tohoto dokumentu nebo kterékoliv jeho části je zakázáno. Toto platí obzvláště pro obchodní známky, označení modelů, čísla součástí a výkresovou dokumentací. Garancijski pogoji in omejitve Uporabljajte samo odobrene dele. Garancija proizvajalca ni veljavna pri poškodbah ali motnjah v delovanju, ki so posledica uporabe neodobrenih delov. Proizvajalec ne prevzema nikakršne odgovornosti za poškodbe, ki so nastale zaradi sprememb, dodatkov ali prilagoditev na izdelku, ki so bile izvedene brez pisne odobritve proizvajalca. Copyright 2004, Atlas Copco Airpower n.v., Antwerp, Belgium. Brez pisnega dovoljenja ni dovoljeno uporabljati ali razmnoževati nobenega dela dokumenta. To velja še posebno za blagovne znamke, označbe modelov, številke izdelkov in risbe. Garantijos ir atsakomybës galiojimas Naudokite tik originalias dalis. Garantija nebus taikoma tuo atveju, jeigu þala ar sutrikimas atsiranda naudojant neoriginalias dalis. Gamintojas neprisiima jokios atsakomybës dël þalos, susijusios su modifikacija, papildymu ar perdirbimu, atliktu be raðtiðko gamintojo sutikimo. Autorystës teisë 2004, “Atlas Copco Airpower n.v.“, Antverpenas, Belgija. Neteisëtas viso teksto ar kurios nors jo dalies panaudojimas ar kopijavimas yra draudþiamas. Visø pirma ði sàlyga taikoma prekiniams þenklams, modeliø pavadinimams, daliø numeriams ir brëþiniams.

SAFETY PRECAUTIONS FOR PORTABLE COMPRESSOR To be read attentively and acted accordingly before towing, lifting, operating, performing maintenance or repairing the compressor

0.1

INTRODUCTION

The policy of Atlas Copco is to provide the users of their equipment with safe, reliable and efficient products. Factors taken into account are among others: - the intended and predictable future use of the products, and the environments in which they are expected to operate, - applicable rules, codes and regulations, - the expected useful product life, assuming proper service and maintenance, - providing the manual with up-to-date information. Before handling any product, take time to read the relevant instruction manual. Besides giving detailed operating instructions, it also gives specific information about safety, preventive maintenance, etc. Keep the manual always at the unit location, easy accessible to the operating personnel. See also the safety precautions of the engine and possible other equipment, which are separately sent along or are mentioned on the equipment or parts of the unit. These safety precautions are general and some statements will therefore not always apply to a particular unit. Only people that have the right skills should be allowed to operate, adjust, perform maintenance or repair on Atlas Copco equipment. It is the responsibility of management to appoint operators with the appropriate training and skill for each category of job. Skill level 1: Operator An operator is trained in all aspects of operating the unit with the pushbuttons, and is trained to know the safety aspects. Skill level 2: Mechanical technician A mechanical technician is trained to operate the unit the same as the operator. In addition, the mechanical technician is also trained to perform maintenance and repair, as described in the instruction manual, and is allowed to change settings of the control and safety system. A mechanical technician does not work on live electrical components. Skill level 3: Electrical technician An electrical technician is trained and has the same qualifications as both the operator and the mechanical technician. In addition, the electrical technician may carry out electrical repairs within the various enclosures of the unit. This includes work on live electrical components. Skill level 4: Specialist from the manufacturer This is a skilled specialist sent by the manufacturer or its agent to perform complex repairs or modifications to the equipment. In general it is recommended that not more than two people operate the unit, more operators could lead to unsafe operating conditions. Take necessary steps to keep unauthorized persons away from the unit and

eliminate all possible sources of danger at the unit. When handling, operating, overhauling and/or performing maintenance or repair on Atlas Copco equipment, the mechanics are expected to use safe engineering practices and to observe all relevant local safety requirements and ordinances. The following list is a reminder of special safety directives and precautions mainly applicable to Atlas Copco equipment. These safety precautions apply to machinery processing or consuming air. Processing of any other gas requires additional safety precautions typical to the application and are not included herein. Neglecting the safety precautions may endanger people as well as environment and machinery: - endanger people due to electrical, mechanical or chemical influences, - endanger the environment due to leakage of oil, solvents or other substances, - endanger the machinery due to function failures. All responsibility for any damage or injury resulting from neglecting these precautions or by non-observance of ordinary caution and due care required in handling, operating, maintenance or repair, also if not expressly mentioned in this instruction manual, is disclaimed by Atlas Copco. The manufacturer does not accept any liability for any damage arising from the use of non-original parts and for modifications, additions or conversions made without the manufacturer’s approval in writing. If any statement in this manual does not comply with local legislation, the stricter of the two shall be applied. Statements in these safety precautions should not be interpreted as suggestions, recommendations or inducements that it should be used in violation of any applicable laws or regulations.

when air is admitted. 4

Normal ratings (pressures, temperatures, speeds, etc.) shall be durably marked.

Operate the unit only for the intended purpose and within its rated limits (pressure, temperature, speeds, etc.).

The machinery and equipment shall be kept clean, i.e. as free as possible from oil, dust or other deposits.

To prevent an increase in working temperature, inspect and clean heat transfer surfaces (cooler fins, intercoolers, water jackets, etc.) regularly. See the maintenance schedule.

All regulating and safety devices shall be maintained with due care to ensure that they function properly. They may not be put out of action.

Care shall be taken to avoid damage to safety valves and other pressure-relief devices, especially to avoid plugging by paint, oil coke or dirt accumulation, which could interfere with the functioning of the device.

10 Pressure and temperature gauges shall be checked regularly with regard to their accuracy. They shall be replaced whenever outside acceptable tolerances. 11 Safety devices shall be tested as described in the maintenance schedule of the instruction manual to determine that they are in good operating condition. 12 Mind the markings and information labels on the unit. 13 In the event the safety labels are damaged or destroyed, they must be replaced to ensure operator safety. 14 Keep the work area neet. Lack of order will increase the risk of accidents.

0.2 1

GENERAL SAFETY PRECAUTIONS

The owner is responsible for maintaining the unit in a safe operating condition. Unit parts and accessories must be replaced if missing or unsuitable for safe operation.

The supervisor, or the responsible person, shall at all times make sure that all instructions regarding machinery and equipment operation and maintenance are strictly followed and that the machines with all accessories and safety devices, as well as the consuming devices, are in good repair, free of abnormal wear or abuse, and are not tampered with.

Whenever there is an indication or any suspicion that an internal part of a machine is overheated, the machine shall be stopped but no inspection covers shall be opened before sufficient cooling time has elapsed; this to avoid the risk of spontaneous ignition of oil vapour

- 11 -

15 When working on the unit, wear safety clothing. Depending on the kind of activities these are: safety glasses, ear protection, safety helmet (including visor), safety gloves, protective clothing, safety shoes. Do not wear the hair long and loose (protect long hair with a hairnet), or wear loose clothing or jewelry. 16 Take precautions against fire. Handle fuel, oil and anti-freeze with care because they are inflammable substances. Do not smoke or approach with naked flame when handling such substances. Keep a fireextinguisher in the vicinity.

0.3

SAFETY DURING TRANSPORT AND INSTALLATION

To lift a unit, all loose or pivoting parts, e.g. doors and towbar, shall first be securely fastened. Do not attach cables, chains or ropes directly to the lifting eye; apply a crane hook or lifting shackle meeting local safety regulations. Never allow sharp bends in lifting cables, chains or ropes. Helicopter lifting is not allowed. It is strictly forbidden to dwell or stay in the risk zone under a lifted load. Never lift the unit over people or residential areas. Lifting acceleration and retardation shall be kept within safe limits. 1

Before towing the unit: - ascertain that the pressure vessel(s) is (are) depressurized, - check the towbar, the brake system and the towing eye. Also check the coupling of the towing vehicle, - check the towing and brake capability of the towing vehicle, - check that the towbar, jockey wheel or stand leg is safely locked in the raised position, - ascertain that the towing eye can swivel freely on the hook, - check that the wheels are secure and that the tyres are in good condition and inflated correctly, - connect the signalisation cable, check all lights and connect the pneumatic brake couplers, - attach the safety break-away cable or safety chain to the towing vehicle, - remove wheel chocks, if applied, and disengage the parking brake.

To tow a unit use a towing vehicle of ample capacity. Refer to the documentation of the towing vehicle.

If the unit is to be backed up by the towing vehicle, disengage the overrun brake mechanism (if it is not an automatic mechanism).

Never exceed the maximum towing speed of the unit (mind the local regulations).

Place the unit on level ground and apply the parking brake before disconnecting the unit from the towing vehicle. Unclip the safety break-away cable or safety chain. If the unit has no parking brake or jockey wheel, immobilize the unit by placing chocks in front of and/or behind the wheels. When the towbar can be positioned vertically, the locking device must be applied and kept in good order.

To lift heavy parts, a hoist of ample capacity, tested and approved according to local safety regulations, shall be used.

Lifting hooks, eyes, shackles, etc., shall never be bent and shall only have stress in line with their design load axis. The capacity of a lifting device diminishes when the lifting force is applied at an angle to its load axis.

For maximum safety and efficiency of the lifting apparatus all lifting

members shall be applied as near to perpendicular as possible. If required, a lifting beam shall be applied between hoist and load. 9

injury or death. For breathing air quality, the compressed air must be adequately purified according to local legislation and standards. Breathing air must always be supplied at stable, suitable pressure.

Never leave a load hanging on a hoist.

10 A hoist has to be installed in such a way that the object will be lifted perpendicular. If that is not possible, the necessary precautions must be taken to prevent load-swinging, e.g. by using two hoists, each at approximately the same angle not exceeding 30° from the vertical. 11 Locate the unit away from walls. Take all precautions to ensure that hot air exhausted from the engine and driven machine cooling systems cannot be recirculated. If such hot air is taken in by the engine or driven machine cooling fan, this may cause overheating of the unit; if taken in for combustion, the engine power will be reduced.

Distribution pipework and air hoses must be of correct diameter and suitable for the working pressure. Never use frayed, damaged or deteriorated hoses. Replace hoses and flexibles before the lifetime expires. Use only the correct type and size of hose end fittings and connections.

10 If the compressor is to be used for sand-blasting or will be connected to a common compressed-air system, fit an appropriate non-return valve (check valve) between compressor outlet and the connected sand-blasting or compressed-air system. Observe the right mounting position/direction. 11 Before removing the oil filler plug, ensure that the pressure is released by opening an air outlet valve.

0.4

SAFETY DURING USE AND OPERATION

When the unit has to operate in a fire-hazardous environment, each engine exhaust has to be provided with a spark arrestor to trap incendiary sparks.

The exhaust contains carbon monoxide which is a lethal gas. When the unit is used in a confined space, conduct the engine exhaust to the outside atmosphere by a pipe of sufficient diameter; do this in such a way that no extra back pressure is created for the engine. If necessary, install an extractor. Observe any existing local regulations. Make sure that the unit has sufficient air intake for operation. If necessary, install extra air intake ducts.

When operating in a dust-laden atmosphere, place the unit so that dust is not carried towards it by the wind. Operation in clean surroundings considerably extends the intervals for cleaning the air intake filters and the cores of the coolers.

Close the compressor air outlet valve before connecting or disconnecting a hose. Ascertain that a hose is fully depressurized before disconnecting it. Before blowing compressed air through a hose or air line, ensure that the open end is held securely, so that it cannot whip and cause injury.

The air line end connected to the outlet valve must be safeguarded with a safety cable, attached next to the valve.

No external force may be exerted on the air outlet valves, e.g. by pulling on hoses or by installing auxiliary equipment directly to a valve, e.g. a water separator, a lubricator, etc. Do not step on the air outlet valves.

Never move a unit when external lines or hoses are connected to the outlet valves, to avoid damage to valves, manifold and hoses.

Do not use compressed air from any type of compressor, without taking extra measures, for breathing purposes as this may result in

- 12 -

12 Never remove a filler cap of the cooling water system of a hot engine. Wait until the engine has sufficiently cooled down. 13 Never refill fuel while the unit is running, unless otherwise stated in the Atlas Copco Instruction Book (AIB). Keep fuel away from hot parts such as air outlet pipes or the engine exhaust. Do not smoke when fuelling. When fuelling from an automatic pump, an earthing cable should be connected to the unit to discharge static electricity. Never spill nor leave oil, fuel, coolant or cleansing agent in or around the unit. 14 All doors shall be shut during operation so as not to disturb the cooling air flow inside the bodywork and/or render the silencing less effective. A door should be kept open for a short period only e.g. for inspection or adjustment. 15 Periodically carry out maintenance works according to the maintenance schedule. 16 Stationary housing guards are provided on all rotating or reciprocating parts not otherwise protected and which may be hazardous to personnel. Machinery shall never be put into operation, when such guards have been removed, before the guards are securely reinstalled.

17 Noise, even at reasonable levels, can cause irritation and disturbance which, over a long period of time, may cause severe injuries to the nervous system of human beings. When the sound pressure level, at any point where personnel normally has to attend, is: below 70 dB(A): no action needs to be taken, above 70 dB(A): noise-protective devices should be provided for people continuously being present in the room, below 85 dB(A): no action needs to be taken for occasional visitors staying a limited time only, above 85 dB(A): room to be classified as a noise-hazardous area and an obvious warning shall be placed permanently at each entrance to alert people entering the room, for even relatively short times, about the need to wear ear protectors, above 95 dB(A): the warning(s) at the entrance(s) shall be completed with the recommendation that also occasional visitors shall wear ear protectors, above 105 dB(A): special ear protectors that are adequate for this noise level and the spectral composition of the noise shall be provided and a special warning to that effect shall be placed at each entrance.

26 Never operate the unit at pressures or speeds below or in excess of its limits as indicated in the technical specifications.

12 Support the towbar and the axle(s) securely if working underneath the unit or when removing a wheel. Do not rely on jacks.

0.5

13 Do not remove any of, or tamper with, the sound-damping material. Keep the material free of dirt and liquids such as fuel, oil and cleansing agents. If any sound-damping material is damaged, replace it to prevent the sound pressure level from increasing.

Maintenance, overhaul and repair work shall only be carried out by adequately trained personnel; if required, under supervision of someone qualified for the job. 1

Use only the correct tools for maintenance and repair work, and only tools which are in good condition.

Parts shall only be replaced by genuine Atlas Copco replacement parts.

All maintenance work, other than routine attention, shall only be undertaken when the unit is stopped. Steps shall be taken to prevent inadvertent starting. In addition, a warning sign bearing a legend such as ”work in progress; do not start” shall be attached to the starting equipment. On engine-driven units the battery shall be disconnected and removed or the terminals covered by insulating caps. On electrically driven units the main switch shall be locked in open position and the fuses shall be taken out. A warning sign bearing a legend such as ”work in progress; do not supply voltage” shall be attached to the fuse box or main switch.

18 Insulation or safety guards of parts the temperature of which can be in excess of 80 °C (175 °F) and which may be accidentally touched by personnel shall not be removed before the parts have cooled to room temperature. 19 Never operate the unit in surroundings where there is a possibility of taking in flammable or toxic fumes.

20 If the working process produces fumes, dust or vibration hazards, etc., take the necessary steps to eliminate the risk of personnel injury. 21 When using compressed air or inert gas to clean down equipment, do so with caution and use the appropriate protection, at least safety glasses, for the operator as well as for any bystander. Do not apply compressed air or inert gas to your skin or direct an air or gas stream at people. Never use it to clean dirt from your clothes. 22 When washing parts in or with a cleaning solvent, provide the required ventilation and use appropriate protection such as a breathing filter, safety glasses, rubber apron and gloves, etc. 23 Safety shoes should be compulsory in any workshop and if there is a risk, however small, of falling objects, wearing of a safety helmet should be included. 24 If there is a risk of inhaling hazardous gases, fumes or dust, the respiratory organs must be protected and depending on the nature of the hazard, so must the eyes and skin. 25 Remember that where there is visible dust, the finer, invisible particles will almost certainly be present too; but the fact that no dust can be seen is not a reliable indication that dangerous, invisible dust is not present in the air.

SAFETY DURING MAINTENANCE AND REPAIR

Before dismantling any pressurized component, the compressor or equipment shall be effectively isolated from all sources of pressure and the entire system shall be relieved of pressure. Do not rely on nonreturn valves (check valves) to isolate pressure systems. In addition, a warning sign bearing a legend such as ”work in progress; do not open” shall be attached to each of the outlet valves.

Prior to stripping an engine or other machine or undertaking major overhaul on it, prevent all movable parts from rolling over or moving.

Make sure that no tools, loose parts or rags are left in or on the machine. Never leave rags or loose clothing near the engine air intake.

Never use flammable solvents for cleaning (fire-risk).

Take safety precautions against toxic vapours of cleaning liquids.

Never use machine parts as a climbing aid.

10 Observe scrupulous cleanliness during maintenance and repair. Keep away dirt, cover the parts and exposed openings with a clean cloth, paper or tape. 11 Never weld on or perform any operation involving heat near the fuel or oil systems. Fuel and oil tanks must be completely purged, e.g. by steam-cleaning, before carrying out such operations. Never weld on, or in any way modify, pressure vessels. Disconnect the alternator cables during arc welding on the unit.

- 13 -

14 Use only lubricating oils and greases recommended or approved by Atlas Copco or the machine manufacturer. Ascertain that the selected lubricants comply with all applicable safety regulations, especially with regard to explosion or fire-risk and the possibility of decomposition or generation of hazardous gases. Never mix synthetic with mineral oil. 15 Protect the engine, alternator, air intake filter, electrical and regulating components, etc., to prevent moisture ingress, e.g. when steamcleaning. 16 When performing any operation involving heat, flames or sparks on a machine, the surrounding components shall first be screened with nonflammable material. 17 Never use a light source with open flame for inspecting the interior of a machine. 18 When repair has been completed, the machine shall be barred over at least one revolution for reciprocating machines, several revolutions for rotary ones to ensure that there is no mechanical interference within the machine or driver. Check the direction of rotation of electric motors when starting up the machine initially and after any alteration to the electrical connection(s) or switch gear, to check that the oil pump and the fan function properly. 19 Maintenance and repair work should be recorded in an operator’s logbook for all machinery. Frequency and nature of repairs can reveal unsafe conditions. 20 When hot parts have to be handled, e.g. shrink fitting, special heatresistant gloves shall be used and, if required, other body protection shall be applied. 21 When using cartridge type breathing filter equipment, ascertain that the correct type of cartridge is used and that its useful service life is not surpassed. 22 Make sure that oil, solvents and other substances likely to pollute the environment are properly disposed of. 23 Before clearing the unit for use after maintenance or overhaul, check that operating pressures, temperatures and speeds are correct and that the control and shutdown devices function correctly.

0.6

TOOL APPLICATIONS SAFETY

Apply the proper tool for each job. With the knowledge of correct tool use and knowing the limitations of tools, along with some common sense, many accidents can be prevented. Special service tools are available for specific jobs and should be used when recommended. The use of these tools will save time and prevent damage to parts.

0.7

SPECIFIC SAFETY PRECAUTIONS

Batteries When servicing batteries, always wear protecting clothing and glasses. 1

The electrolyte in batteries is a sulphuric acid solution which is fatal if it hits your eyes, and which can cause burns if it contacts your skin. Therefore, be careful when handling batteries, e.g. when checking the charge condition.

Install a sign prohibiting fire, open flame and smoking at the post where batteries are being charged.

When batteries are being charged, an explosive gas mixture forms in the cells and might escape through the vent holes in the plugs. Thus an explosive atmosphere may form around the battery if ventilation is poor, and can remain in and around the battery for several hours after it has been charged. Therefore: - never smoke near batteries being, or having recently been, charged, - never break live circuits at battery terminals, because a spark usually occurs.

When connecting an auxiliary battery (AB) in parallel to the unit battery (CB) with booster cables: connect the + pole of AB to the + pole of CB, then connect the - pole of CB to the mass of the unit. Disconnect in the reverse order.

- the capacity of the vessel V in l. 2

The pressure vessel is only to be used for the applications as specified above and in accordance with the technical specifications. Safety reasons prohibit any other applications.

National legislation requirements with respect to re-inspection must be complied with.

No welding or heat treatment of any kind is permitted to those vessel walls which are exposed to pressure.

The vessel is provided and may only be used with the required safety equipment such as manometer, overpressure control devices, safety valve, etc.

Draining of condensate shall be performed regularly when vessel is in use.

Installation, design and connections should not be changed.

Bolts of cover and flanges may not be used for extra fixation.

Safety valves All adjustments or repairs are to be done by an authorized representative of the valve supplier (see maintenance schedule).

Pressure vessels (according to directive 87/404/EEC annex II § 2) Maintenance/installation requirements: 1

The vessel can be used as pressure vessel or as separator and is designed to hold compressed air for the following application: - pressure vessel for compressor, - medium AIR/OIL, and operates as detailed on the data plate of the vessel: - the maximum working pressure ps in bar, - the maximum working temperature Tmax in °C, - the minimum working temperature Tmin in °C,

- 14 -

ORDERING SPARE PARTS

COMMANDE DE PIÈCES DETACHEES

PEDIDO DE PARTES

Always quote the part number, the designation and the quantity of the parts required, as well as the type and the serial number of the machine.

Toujours indiquer le numéro de pièce, la désignation, la quantité désirée ainsi que le type et le numéro de série du groupe.

Siempre comunicar el número de parte, la designación y la cantidad deseada así como el tipo y el número de serie de la máquina.

EXPLANATION OF THE COLUMNS

EXPLICATION DES INTITULES DES COLONNES

INFORMACIONES SOBRE LAS COLUMNAS

REF : REFERENCE CODE Establishes the connection between a part in the list and a part in the illustration. "–" means that the part is not shown in the illustration.

REF : CODE DE REFERENCE Réfère à la pièce détachée spécifiée dans la liste et sur l’illustration. "–" implique que la pièce n’est pas indiquée sur l’illustration.

REF : CODIGO DE REFERENCIA Establece la conexión entre una parte en la lista y una parte en la ilustración. "–" quiere decir que la parte no está ilustrada.

PART NUMBER If no part number is given, the part cannot be obtained as a spare part. Parts marked with a dot are part of the assembly listed right above them. DESIGNATION Usually this is the name of the part. For standard parts, in addition to the name, a number of characteristics are given. QTY : QUANTITY Indicates the quantity of the part concerned. "AR" stands for "As Required".

BESTELLEN VAN ONDERDELEN Vermeld steeds het onderdeelnummer, de benaming en het aantal van de gewenste stukken, evenals het type en het serienummer van de machine. TOELICHTING BIJ DE KOLOMMEN REF : REFERENTIECODE Legt het verband tussen een onderdeel uit de lijst en een onderdeel op de tekening. "–" betekent dat het onderdeel niet is getekend. PART NUMBER : ONDERDEELNUMMER Indien niet opgegeven is het onderdeel niet als wisselstuk beschikbaar. Onderdelen aangeduid met een stip maken deel uit van het geheel dat boven de betreffende onderdelen staat. DESIGNATION : BENAMING Meestal de benaming van het onderdeel. In het geval van standaard onderdelen worden naast de benaming een aantal karakteristieken opgegeven. QTY : AANTAL Geeft de hoeveelheid van het betreffende onderdeel weer. De aanduiding "AR" betekent "As Required" (zoals vereist).

PART NUMBER : NUMERO DE PIECE DETACHEE Si le numéro n’est pas indiqué, la pièce n’est pas disponible en tant que pièce de rechange. Les pièces indiquées par un point gras font partie de l’ensemble se trouvant au-dessus des pièces détachées correspondantes.

PART NUMBER : NUMERO DE PARTE Si no se da ningún número, quiere decir que la parte no está disponible como parte de recambio. Partes marcadas con un punto son partes del conjunto indicado más arriba.

DESIGNATION En général, le nom de la pièce. S’il s’agit de pièces standard, outre la désignation, un certain nombre de caractéristiques sont indiquées.

DESIGNATION : DESIGNACION Principalmente el nombre de la parte. En caso de partes estándares, el nombre es seguido por especificaciones.

QTY : QUANTITE Indique la quantité de la pièce détachée. “AR” indique “As required”, c’est-à-dire la quantité à déterminer selon le cas.

QTY : CANTIDAD Indica la cantidad de la parte correspondiente. La indicación "AR" significa "As Required" (como sea requerido).

BESTELLUNG VON ERSATZTEILEN

BESTÄLLNING AV RESERVDELAR

Stets die Teilenummer, die Bezeichnung, und die Anzahl der gewünschten Teile sowie den Typ und die Seriennummer der Maschine angeben.

Ange alltid reservdelsnummer, benämning och kvantitet för varje önskad detalj samt maskinens typ och tillverkningsnummer.

INFORMATION ZU DEN SPALTEN

TÖRKLARING AV SPALTER

REF : REFERENZCODE Stellt die Verbindung zwischen einem Teil in der Liste und einem Teil auf der Zeichnung her. "–" bedeutet, daß das Teil nicht in der Zeichnung dargestellt ist.

REF : REFERENSNUMMER Identifierar motsvarande detaljer i listan och illustrationen. "–" betyder att detaljen inte visas i illustrationen.

PART NUMBER : TEILENUMMER Wenn keine Teilenummer angegeben ist, ist das Teil nicht als Ersatzteil erhältlich. Mit einem Punkt markierte Teile gehören zu der Einheit, die über den jeweiligen Teilen aufgeführt ist. DESIGNATION : BEZEICHNUNG Meistens die Bezeichnung des Teils. Bei Standardteilen werden neben der Bezeichnung einige technische Daten angegeben. QTY : ANZAHL Gibt die Anzahl des betreffenden Teils an. Die Angabe "AR" steht für "As Required" (wie erforderlich).

- 15 -

PART NUMBER : RESERVDELSNUMMER Om inget reservdelsnummer anges, kan detaljen inte erhållas som reservdel. Detaljer som anges med en punkt ingår i den monteringssats som listas ovanför dessa. DESIGNATION : BENÄMNING Detta är vanligen namnet på detaljen. För standarddetaljer anges förutom namnet ett antal specifikationer. QTY : KVANTITET Anger den ifrågavarande detaljens kvantitet. "AR" (As Required) betyder enligt behov.

ORDERING SPARE PARTS

ORDINAZIONE DI PARTI DI RICAMBIO

BESTILLING AV RESERVEDELER

ONCOMENDAS DE PEÇAS

Menzionare sempre il numero della parte, la denominazione e il numero de pezzi desiderati, nonché il tipo e il numero di serie della macchina.

Oppgi alltid delenummer, betegnelse og antall på de delene du trenger, samt maskintype og serienummer.

SPIEGAZIONE DELLE COLONNE

FORKLARING TIL SPALTENE

Refira sempre o número da peça, a designação e a quantidade das peças que pretende encomendar, assim como o tipo e o número de série do aparelho.

REF : CODICE DI RIFERIMENTO Stabilisce il nesso tra un pezzo nell'elenco e un pezzo nell'illustrazione. "–" siginfica che il pezzo non è presente nell'illustrazione.

REF: REFERANSEKODE Viser hvor en del i listen er vist på illustrasjonen. "-" betyr at delen ikke er vist på illustrasjonen.

PART NUMBER : NUMERO DELLA PARTE Nel caso non sia fornito il numerom di parte, il pezzo non puó essere ordinato come parte di ricambio. Il componenti indicati con un puntino fanno parte del gruppo elencato immediatamente sopra di essi.

DELENUMMER Hvis delenummer ikke er oppgitt, kan delen ikke bestilles som reservedel. Deler merket med en prikk er del av enheten som er oppgitt like ovenfor de aktuelle delene.

DESIGNATION : DENOMNAZIONE Generalmente si tratta della denominazione della parte. Per i pezzi standard oltre alla denominazione sono fornite alcune caratteristiche. QTY : QUANTITA'

BETEGNELSE Dette er vanligvis delens navn. Ved standarddeler blir enkelte karakteristika oppgitt i tillegg til navnet. QTY: ANTALL Oppgir antallet av den aktuelle delen. "EB" betyr "Etter behov".

Indica la quantità dei pezzi in questione. "AR" significa "As Required" (Come richiesto).

EXPLICAÇÃO DAS COLUNAS REF : CÓDIGO DE REFERÉNCIA Estabeleça a ligação entre a peça na lista e a peça no desenho. "–" significa que a peça não vem no desenho. PART NUMBER : NÚMERO DA PEÇA Se não vier referido o número da peça, a peça não pode ser adquirida como peça sobressalente. As peças marcadas com pontos são peças de um conjunto listado acima dessa peça. DESIGNATION : DESIGNAÇÃO Geralmente é o nome da peça. Para peças normalizadas, além do nome da peça, vem também referido um número. QTY : QUANTIDADE Indica a quantidade da peça em questão. "AR" (As Required) quer dizer “Como solicitado”.

ΠAPAΓΓEΛIA ANTAΛΛAKTIKΩN

VARAOSIEN TILAAMINEN

Ange alltid reservdelsnummer, benämning och kvantitet för varje önskad detalj samt maskinens typ och tillverkningsnummer.

Πάντοτε σηµειώνετε τον κωδικό, τον προσδιορισµό και την ποσότητα των απαιτούµενων ανταλλακτικών, καθώς επίσης τον τύπο και τον αύξοντα κωδικό αριθµό παραγωγής του µηχανήµατος.

Tilauksessa tulee aina mainita osanumero, nimike ja määrä sekä kompressorin tyyppi ja sarjanumero.

TÖRKLARING AV SPALTER

EΞHΓHΣH TΩN ΣTHΛΩN

REF : REFERENSNUMMER Identifierar motsvarande detaljer i listan och illustrationen. "–" betyder att detaljen inte visas i illustrationen.

REF : KΩ∆IKOΣ ANAΦOPAΣ Παρουσιάζει τη σχέση µεταξύ ενός εξαρτήµατος στη λίστα και ενός εξαρτήµατος στη φωτογραφία. Tο "–" σηµαίνει ότι το εξάρτηµα δεν εµφανίζεται στη φωτογραφία.

REF: VIITE: VIITEKOODI Viitekoodi yhdistää luettelossa mainitun osan kuvassa olevaan. "_" tarkoittaa, että osaa ei ole merkitty kuvaan.

BESTÄLLNING AV RESERVDELAR

PART NUMBER : KΩ∆IKOΣ APIΘMOΣ Aν δεν δίνεται κάποιος κωδικός αριθµός, τότε το εξάρτηµα δεν µπορεί να ληφθεί ως ανταλλακτικό. Tα εξαρτήµατα που έχουν µαρκαρισθεί µε µία τελεία είναι τµήµατα του συγλροτήµατος που παρουσιάζεται ακριβώς πάνω από αυτά. DESIGNATION : ΠPOΣ∆IOPIΣMOΣ Συνήθως αυτό είναι το όνοµα του εξαρτήµατος. Για τα βασικά εξαρτήµατα, επιπροσθέτα στην ονοµασία, δίνεται και ένας αριθµός χαρακτηριστικών. QTY : ΠOΣOTHTA ∆ηλώνει την ποσότητα του υπόψη εξαρτήµατος. “AR” σηµαίνει “Ως απαιτείται”. Για τα βασικά εξαρτήµατα, η ποσότητα δίνεται στη φωτογραφία παρά στη λίστα.

- 16 -

SARAKKEIDEN SELITYKSET

PART NUMBER: OSANUMERO Ellei osanumeroa ole mainittu, osaa ei ole saatavana varaosana. Pisteellä merkityt osat kuuluvat niiden edellä mainittuun asennelmaan. DESIGNATION: NIMIKE Nimikkeenä käytetään tavallisesti osan nimeä. Vakio-osien ollessa kyseessä mainitaan nimen lisäksi osan joitakin ominaisuuksia. QTY: MÄÄRÄ Tarkoittaa kyseisten osien lukumäärää. "AR" tarkoittaa "tarpeen mukaan".

ORDERING SPARE PARTS

ZAMAWIANIE CZĘŚCI ZAMIENNYCH

OBJEDNÁVÁNÍ NÁHRADNÍCH DÍLÙ

订购备件

Należy zawsze podawać numery, nazwy i ilości potrzebnych części, a także typ i numer seryjny maszyny.

V objednávce vždy uveïte èíslo dílu, jeho oznaèení a požadované množství. Rovnìž tak udejte typ a výrobní èíslo zaøízení.

请务必提供所需部件的部件号、名称和数量，以及设备型号和序列号。

WYJAŚNIENIE PRZEZNACZENIA KOLUMN

VYSVÌTLIVKY K JEDNOTLIVÝM SLOUPCÙM

表格各列说明

REF: KOD REFERENCYJNY Kojarzy część na liście z częścią na ilustracji. Symbol “–” oznacza, że część nie jest przedstawiona na ilustracji.

REF : REFERENÈNÍ KÓD Udává spojitost mezi dílem v seznamu a dílem na obrázku. “–” znamená, že díl není na obrázku uveden.

REF：参考代码确立列表内部件与插图内部件间的联系。 “–”表示插图内未显示此部件。

PART NUMBER (NUMER CZĘŚCI) Brak numeru oznacza, że dana część nie jest dostępna jako część zamienna. Części oznaczone kropką należą do zespołu wymienionego bezpośrednio nad nimi.

ÈÍSLO DÍLU Pokud není číslo dílu uvedeno, nelze tuto součást objednat jako náhradní díl. Díly označené tečkami jsou součástí konstrukčního celku, který je uveden přímo nad nimi.

部件号

OZNAÈENÍ Ve sloupci označení bývá obvykle uveden název dílu. U standardních součástí je vedle názvu uváděna též řada dalších charakteristik.

通常为部件的名称。对于标准件，除了名称外，还会列出它的一些特性。

DESIGNATION (NAZWA) Zwykle jest to nazwa części. W przypadku części standardowych oprócz nazwy podano szereg właściwości. QTY (IL.): ILOŚĆ Ilość części danego rodzaju. “AR” (“OP”) oznacza “odpowiednio do potrzeb”.

Заказ запасных частей Необходимо всегда указывать номер детали, наименование и количество заказываемых запчастей, а также тип и серийный номер устройства. Расшифровка столбцов ИЛЛ. : код сноски Показывает ссылку детали в списке на ее соответствующую иллюстрацию. "–" означает, что к данной детали нет иллюстраций. НОМЕР ДЕТАЛИ Отсутствие номера детали означает, что данная деталь как запчасть не поставляется. Детали, помеченные точкой, являются частями сборного механизма, который указан над этими деталями. НАИМЕНОВАНИЕ

POÈET : MNOŽSTVÍ Oznaèuje množství uvedených dílù. Zkratka “PP” znamená “Podle požadavku”.

如果未给出部件号，则表明无法通过备件方式购买此部件。标有圆点的部件是其上一行所列配件的一部分。

名称

QTY：数量表明可供部件的数量。“AR”代表 “根据需要”

PÓTALKAKTRÉSZ-RENDELÉS

OBJEDNÁVANIE NÁHRADNÝCH SÚČIASTOK

Mindig jelezze a szükséges alkatrész számát, megnevezését és mennyiségét , valamint a gép típusát és sorozatszámát.

Uvádzajte vždy číslo súčiastky, označenie a množstvo požadovaných súčiastok, ako aj typ a výrobné číslo stroja.

AZ OSZLOPOK MAGYARÁZATA

VYSVETLENIE STĹPCOV

REF: REFERENCIAKÓD Ez teremt kapcsolatot a listán szereplő alkatrész és az ábrán látható alkatrész között. “–”: azt jelenti, hogy az adott alkatrész nem szerepel az ábrán.

REF : REFERENČNÝ KÓD Stanovuje spojitost’ medzi súčiastkou v zozname a súčiastkou na obrázku. "–" znamená, že súčiastka nie je zobrazená na obrázku.

ALKATRÉSZ-SZÁM Ha nincsen megadva alkatrész-szám, akkor az adott alkatrész nem rendelhető meg pótalkatrészként. A ponttal jelölt alkatrészek a közvetlenül fölöttük felsorolt szerelvény részét képezik. MEGNEVEZÉS Rendszerint ez az alkatrész neve. Az alapfelszereltséghez tartozó alkatrészek esetében a név mellett néhány jellemzõ adat is szerepel. QTY: MENNYISÉG Az adott alkatrész mennyiségét jelzi. “SZ” jelentése “Szükség szerint”

Обычно, название детали. К стандартным деталям, кроме названия, могут быть даны некоторые их характеристики. КОЛ-ВО: Количество Показывает количество деталей. «По тр.» означает «по требованию».

- 17 -

ČÍSLO SÚČIASTKY Ak nie je uvedené žiadne číslo súčiastky, táto súčiastka nie je k dispozícii ako náhradná. Súčiastky označené bodkou sú čast’ou zostavy uvedenej hneď nad nimi. OZNAČENIE Obyčajne je to názov súčiastky. U normalizovaných súčiastok sa okrem názvu uvádza aj niekoľko charakteristík QTY : MNOŽSTVO Označuje množstvo danej súčiastky. "AR" je skratka pre “Podľa potreby”.

ORDERING SPARE PARTS

NAROČEVANJE NADOMESTNIH DELOV

VARUOSADE TELLIMINE

Zmeraj navedite številko nadomestnega dela, označbo in količino potrebnih delov ter tip in serijsko številko stroja.

Alati viidake osa numbrile, tähisele ja vajalikule osade kogusele, samuti masina tüübile ja seerianumbrile.

RAZLAGA STOLPCEV

SELGITUS VEERGUDE KOHTA

REF : REFERENČNA ŠIFRA Predstavlja povezavo med delom na seznamu in delom na ilustraciji. “-” predstavlja del, ki ni prikazan na ilustraciji.

REF : VIITENUMBER Loob seose nimekirjas toodud osa ja illustratsioonil esitatud osa vahel. "–" tähendab, et illustratsioonil ei ole seda osa kujutatud.

ŠTEVILKA DELA Če številka dela ni podana potem je ne morete dobiti kot nadomestni del. Deli označeni s piko so sestavni del montaže, navedene nad njimi.

OSA NUMBER Kui osa numbrit ei ole toodud, pole seda osa võimalik varuosana soetada. Punktiga tähistatud osad on nende kohal toodud koostu osaks.

OZNAČBA Običajno je to ime nadomestnega dela. Pri standardnih delih je poleg imena podano še število značilnosti.

TÄHIS Tavaliselt on see osa nimetus. Standardosadel on lisaks nimetusele toodud ka tunnusnumber.

QTY : KOLIČINA Označuje količino nadomestnih delov. “AR” pomeni “kot je bilo zahtevano”.

QTY : KOGUS Osutab vastava osa kogusele. "AR" tähendab vajadusel ("As Required").

REZERVES DAÏU PASÛTÎÐANA ATSARGINIØ DALIØ UÞSAKYMAS Visuomet nurodykite dalies numerá, pavadinimà ir reikiamà daliø kieká, taip pat ir maðinos tipà bei serijiná numerá. STULPELIØ PAAIÐKINIMAI NRD.: NUORODOS KODAS Susieja sàraðe nurodytà dalá su jos atvaizdu iliustracijoje. “–” reiðkia, jog dalis iliustracijoje nepavaizduota.

Vienmçr miniet daïas numuru, apzîmçjumu un nepiecieðamo detaïu daudzumu, kâ arî maðînas tipu un sçrijas numuru. AIÏU IZSKAIDROJUMS REF : ATSAUKSMES KODS Izveido saikni starp detaïu sarakstâ un detaïu uz attçla. "–" nozîmç, ka detaïa nav attçlota ilustrâcijâ.

DALIES NUMERIS Jei numerio nenurodyta, detalës negalima ásigyti kaip atsarginës dalies. Taðku paþymëtos dalys yra prieð jas sàraðe nurodyto mazgo sudëtinë dalis.

DETAÏAS NUMURS Ja detaïas numurs nav minçts, tad detaïu nevar iegût kâ rezerves daïu. Ar punktu apzîmçtâs detaïas ir mezgla sastâvdaïas, kurð ir attçlots tieði virs tâm.

PAVADINIMAS Paprastai tai dalies pavadinimas. Standartinëms dalims kartu su pavadinimu nurodomos ir kelios charakteristikos.

APZÎMÇJUMS Parasti tas ir detaïas nosaukums. Standarta detaïâm, papildus nosaukumam, tiek minçta virkne raksturojumu \ specifikâciju.

KIEK.: KIEKIS Nurodo susijusiø daliø kieká. “AR” reiðkia “As required” (pagal poreiká).

QTY : DAUDZUMS Norâda domâtâs detaïas daudzumu. "AR" nozîmç "As Required" – “kâ nepiecieðams”.

- 18 -

- 19 -

SERVICE PAK

- 20 -

SERVICE PAK

REF

PART NUMBER

DESIGNATION

SERVICE PAK 50H

WITH UNIT

•F

2912 4432 05

SERVICE PAK 500H

•A •B •C •E

OIL FILTER FUEL PRE FILTER FINAL FUEL FILTER SEALING WASHER (For details see page 148)

2912 4432 06

•A •B •C •E

•F •G

•H

•J •K •L •M

FILTER ELEMENT

QTY

REF

PART NUMBER

DESIGNATION

2912 4496 06

SERVICE PAK 1000HR OFF SHORE

•A •B •C •D •E

•F •G

•H

•N •K •L •M

1 1 1 1

SERVICE PAK 1000HR STANDARD OIL FILTER FUEL PRE FILTER FINAL FUEL FILTER SEALING WASHER (For details see page 148) FILTER ELEMENT FLAT GASKET (For details see page 148) SEALING WASHER (For details see page 148) AIR FILTER ELEMENT AIR FILTER SAFETY CARTRIDGE FILTER VALVE

1 1 1 1

OIL FILTER FUEL PRE FILTER FINAL FUEL FILTER GASKET ENGINE ROCKER SEALING WASHER (For details see page 148) FILTER ELEMENT FLAT GASKET (For details see page 148) SEALING WASHER (For details see page 148) AIR FILTER ELEMENT AIR FILTER SAFETY CARTRIDGE FILTER VALVE

3 1 6 4 4 1 1

- 21 -

QTY

1 1 1 1 1 3 1 6 4 4 1 1

REF

PART NUMBER

DESIGNATION

QTY

ENGINE OIL - PAROIL 5W30

- 22 -

REF

PART NUMBER DESIGNATION

A B

1604 6060 00 1604 6059 00

PAROIL 5W30 5 LITER CAN PAROIL 5W30 20 LITER CAN

QTY

1 1

ENGINE OIL - PAROIL 15W40

- 23 -

REF

PART NUMBER DESIGNATION

A B C

1615 5953 00 1615 5954 00 1615 5955 00

PAROIL 15W40 5 LITER CAN PAROIL 15W40 20 LITER CAN PAROIL 15W40 210 LITER BARREL

QTY

1 1 1

COMPRESSOR OIL - PAROIL S

- 24 -

COMPRESSOR OIL - PAROIL S

REF

PART NUMBER

DESIGNATION

QTY

A B C D

1615 5950 01 1615 5951 01 1615 5952 01 1604 7422 00

PAROIL S OIL CAN 5 L OIL CAN 20 L STEEL DRUM 210 L CONTAINER 1000 L

1 1 1 1

REF

PART NUMBER

DESIGNATION

- 25 -

QTY

REF

PART NUMBER

DESIGNATION

QTY

COMPRESSOR OIL - PAROIL S 68

- 26 -

REF

PART NUMBER DESIGNATION

A B

1604 7136 00 1604 7136 00

PAROIL S 68 OIL CAN 20 L STEEL DRUM 210 L

QTY

1 1

ENGINE COOLANT - PARCOOL EG

- 27 -

REF

PART NUMBER DESIGNATION

A B C D

1604 5308 00 1604 5307 01 1604 5306 00 1604 8159 00

PARCOOL EG 5 LITER CAN PARCOOL EG 20 LITER CAN PARCOOL EG 210 LITER BARREL PARCOOL EG CONCENTRATE 5 LITER CAN

QTY

1 1 1 1

SERVICE KIT - UNLOADING VALVE

REF

PART NUMBER DESIGNATION

2910 3003 00

•20 •25 •30 •35 •40 •45 •50 •55 •60 •65 •70

QTY

SERVICE KIT UNLOADER VALVE PLAIN WASHER FLAT GASKET FLAT GASKET FLAT GASKET FLAT GASKET O-RING GASKET GASKET GASKET SEALRING O-RING

6 1 1 1 1 1 1 1 1 1 2

2910 3003 00_02

- 28 -

2910 3003 00/02

SERVICE KIT - REGULATING VALVE

REF

2910 3005 00_02

2910 3005 00/02

- 29 -

PART NUMBER DESIGNATION

2910 3005 00

•20 •25 •30 •35 •40 •45 •50 •55 •60 •65 •70

QTY

SERVICE KIT REGULATING VALVE PLAIN WASHER BEARING BALL FLAT GASKET O-RING O-RING O-RING FILTER GASKET GASKET MEMBRANE SPRING

2 1 2 1 1 1 1 1 1 1 1

SERVICE KIT - OIL SEPARATOR

REF

PART NUMBER DESIGNATION

2911 0116 00

•10 •40

QTY

SERVICE KIT OIL SEPARATOR OIL SEP ELEMENT ASS'Y O-RING

1 1

2911 0116 00_03

- 30 -

2911 0116 00/03

SERVICE KIT - OIL STOP VALVE

REF

2911 0118 00_01

2911 0118 00/01

- 31 -

PART NUMBER DESIGNATION

2911 0118 00

•20 •25 •30 •35 •40 •45 •50

QTY

SERVICE KIT OIL STOP VALVE PLAIN WASHER SEALING WASHER SEALING WASHER O-RING O-RING COMPR.SPRING O-RING

2 1 1 1 1 1 1

SERVICE KIT - ELEMENT MOUNTING

2911 0119 00_01

- 32 -

2911 0119 00/01

SERVICE KIT - ELEMENT MOUNTING

REF

PART NUMBER

2911 0119 00

•10 •20 •30 •40 •50 •60 •70 •80 •90 •100 •110 •120 •130 •140 •150

2911 0119 00/01

DESIGNATION

QTY

REF

PART NUMBER

DESIGNATION

SERVICE KIT ELEMENT MOUNTING LOCK WASHER FLAT GASKET SEALING WASHER O-RING O-RING O-RING O-RING O-RING O-RING O-RING GASKET SEALING RING GASKET PARALLEL KEY O-RING

14 1 1 1 1 1 1 1 1 1 1 2 1 1 1

- 33 -

QTY

REF

PART NUMBER

DESIGNATION

QTY

ELEMENT AND MOUNTS - STANDARD

REF

PART NUMBER DESIGNATION

20 50 60 65 70 80 85 90 95 100 110 120 125

1616 7256 91 1604 2555 00 0147 1401 03 0301 2358 00 1604 2554 00 0147 1401 03 0301 2358 00 1619 5189 01 1604 2803 00 0147 1401 03 0301 2358 00 0147 1494 03 0300 0276 23

QTY

SERVICE STAGE OIS O-01 SUPPORT HEX. HEAD SCREW PLAIN WASHER SUPPORT HEX. HEAD SCREW PLAIN WASHER VIBR. DAMPER PLATE HEX. HEAD SCREW PLAIN WASHER HEX. HEAD SCREW PLAIN WASHER

1 1 4 4 1 4 4 2 2 4 4 2 2

1611 7105 67_08

- 34 -

1611 7105 67/08

COMPRESSOR DRIVE - STANDARD

See Page 96

1611 7130 60_09

1611 7130 60/09

- 35 -

REF

PART NUMBER DESIGNATION

20 25 30

1202 6013 01 1619 6032 00 -

35 40 60 65 70 75 80 85 90 95

0101 1626 00 0147 1380 03 1202 6012 00 1616 5735 00 0508 2158 01 2252 5476 00 0211 1409 00 0506 0100 08 2252 5479 00 -

100 105 110 115

0147 1366 03 2252 5477 00 2252 5478 00 -

120 125 130

2254 7604 00 2254 8832 00 -

135 140 145 150 155

2254 8830 00 2252 5470 00 0211 1409 00 1615 8448 00 -

160 165 170

0147 1244 03 0686 3716 02 0661 1033 00

CASING NIPPLE GASKET (Part of service kit, see page 32) PARALLEL PIN HEX. HEAD SCREW GUARD (COUPLING) DRIVE SHAFT ROLLER BEARING LOCKING PLATE HEX SOCK. SCREW SPHERICAL ROLLER BEARING RETAINER O-RING (Part of service kit, see page 32) HEX. HEAD SCREW WASHER BUSHING SEALING RING (Part of service kit, see page 32) RING BUSHING PARALLEL KEY (Part of service kit, see page 32) BUSHING WASHER HEX SOCK. SCREW OIL NOZZLE O-RING (Part of service kit, see page 32) HEX. HEAD SCREW HEXAGON PLUG SEALING WASHER

QTY

1 1 1 2 18 1 1 1 1 8 1 1 1 4 1 1 2 1 1 1 1 1 3 1 1 1 1 1

VALVES ON ELEMENT - STANDARD

REF

PART NUMBER DESIGNATION

155

2252 5502 93

160

165 170 180 185 220

0147 1363 03 0301 2344 00 0686 4201 03 0653 9038 00 1604 6109 80

225

230

235 250 255

0147 1375 03 0686 3716 01 0653 1062 00

QTY

UNLOADER ASSY (For details see page 107) GASKET (Part of service kit, see page 28, 32) HEX. HEAD SCREW PLAIN WASHER HEXAGON PLUG FLAT GASKET HOUSING (For details see page 100) O-RING (Part of service kit, see page 31, 32) O-RING (Part of service kit, see page 31, 32) HEX. HEAD SCREW HEXAGON PLUG FLAT GASKET

1 1 4 4 1 1 1 1 1 4 1 1

1611 7166 67_08

- 36 -

1611 7166 67/08

COUPLING - BETWEEN ENGINE AND GEAR CASING - STANDARD

See Page 35

1611 7194 67_02

1611 7194 67/02

- 37 -

REF

PART NUMBER DESIGNATION

QTY

20 25 30 100 110 150 200

1626 0441 00 0337 5305 00 0196 1398 00 1626 0442 00 0144 3362 00 0211 1401 00 0144 4001 96

1 1 1 1 8 16 12

COUPLING PARALLEL KEY SET SCREW COUPLING HEX. HEAD SCREW HEX SOCK. SCREW HEX. HEAD SCREW

CONTROL MODULE - STANDARD

REF

PART NUMBER DESIGNATION

QTY

1900 1003 60

CONTROL BOX

•Α50

1604 4248 82

CONTROL BOX (For details see page 112)

See Page 66

See Page 56 or 74

1611 7460 67_02

- 38 -

1611 7460 67/02

BATTERIES - FOR COMPRESSOR WITHOUT COLD WEATHER EQUIPMENT - STANDARD

See Page 66

1611 7504 67/02

1611 7504 67_02

- 39 -

REF

PART NUMBER DESIGNATION

20 25 30 35 65

0975 8300 16 1615 4861 00 1619 5337 01 1604 7881 00 1604 7851 00

BATTERY CLAMP HEX. HEAD SCREW COVER CABLE

QTY

2 4 8 2 1

SKID - STANDARD

REF

PART NUMBER DESIGNATION

10 20 30 40 50 60 70 80 90

1604 7811 01 1604 7814 01 0147 1400 03 0301 2358 00 0686 3716 35 0661 1038 00 1604 6550 00 1604 6551 01 1619 2766 00

SKID TANK FUEL HEX. HEAD SCREW PLAIN WASHER HEXAGON PLUG SEALING WASHER GASKET FLANGE HEX. HEAD SCREW

QTY

1 1 8 8 2 2 1 1 4

1611 7900 69_04

- 40 -

1611 7900 69/04

AIR OUTLET - FOR SKID - STANDARD

See Page 70 or 71

See Page 94 or 95

See Page 90 See Page 54 or 60 1611 7909 69_02

1611 7909 69/02

- 41 -

REF

PART NUMBER DESIGNATION

20 30 60 70 85 95 100 101 102

0634 1001 05 1626 0141 00 1604 2609 00 0663 2111 44 0147 1413 03 0333 5200 09 1626 0140 00 0686 3716 02 -

105

110 115

0147 1403 03 -

170 250 255 257 258 259 260 265 270 275 280 285 290

0634 1000 57 0653 1062 00 0581 0028 01 0581 0034 01 0653 1124 00 0803 5010 08 0575 0102 42 0395 1010 45 0653 1062 00 0581 0028 01 1604 3381 00 0147 1362 03 1604 6743 00

PIPE COUPLING HOSE CHECK VALVE O-RING HEX. HEAD SCREW LOCK WASHER PIPE HEXAGON PLUG FLAT GASKET (Part of service kit, see page 32) O-RING (Part of service kit, see page 32) HEX. HEAD SCREW LOCK WASHER (Part of service kit, see page 32) PIPE COUPLING FLAT GASKET STRAIGHT PIPE COUPLING STRAIGHT PIPE COUPLING FLAT GASKET STRAINER HOSE ASSEMBLY INSULATING HOSE FLAT GASKET STRAIGHT PIPE COUPLING SUPPORT HEX. HEAD SCREW BRACKET

QTY

1 1 1 2 4 4 1 1 1 1 4 4 1 1 1 2 3 1 1 1 1 1 1 1 1

ENGINE AND ACCESSORIES - STANDARD

See Page 35

See Page 56 or 74 1611 7901 69_04

- 42 -

1611 7901 69/04

ENGINE AND ACCESSORIES - STANDARD

REF

PART NUMBER

20 25 30 35 60 70 80 90 100 120 130 150 170 175 180 190 200 220 230 240

1604 6796 00 1604 3650 01 0147 1410 03 0301 2358 00 1615 5509 00 0147 1400 03 0301 2358 00 0147 1477 03 0301 2378 00 1615 5614 00 1613 0808 00 1604 3653 00 1626 1250 00 0337 8158 00 1615 5441 00 0147 1404 03 0367 0100 65 0147 1360 03 0301 2344 00 1626 2061 00

1611 7901 69/04

DESIGNATION ENGINE BEAM HEX. HEAD SCREW PLAIN WASHER RUBBER BUFFER HEX. HEAD SCREW PLAIN WASHER HEX. HEAD SCREW PLAIN WASHER BRACKET BRACKET PULLEY PULLEY PARALLEL KEY WASHER HEX. HEAD SCREW V-BELT HEX. HEAD SCREW PLAIN WASHER SHIELD

QTY

REF

PART NUMBER

DESIGNATION

1 1 4 4 2 4 4 2 2 1 2 1 1 1 1 1 2 3 3 1

- 43 -

QTY

REF

PART NUMBER

DESIGNATION

QTY

EXHAUST - FOR ON SHORE APPLICATION - STANDARD

Engine Part

1611 7902 69_03

- 44 -

1611 7902 69/03

EXHAUST - FOR ON SHORE APPLICATION - STANDARD

REF

PART NUMBER

DESIGNATION

QTY

10 30 40 50 60 100 110

1626 0301 00 1604 2548 00 1626 0932 01 0147 1362 03 0300 0274 93 1626 0980 00 1626 0981 00

PIPE CLAMP MUFFLER HEX. HEAD SCREW PLAIN WASHER INSULATION THERMAL INSULATION THERMAL

1 1 1 6 6 1 1

1611 7902 69/03

REF

PART NUMBER

DESIGNATION

- 45 -

QTY

REF

PART NUMBER

DESIGNATION

QTY

ENGINE COOLING - STANDARD

See Page 59

1611 7903 69_06

- 46 -

1611 7903 69/06

ENGINE COOLING - STANDARD

REF

PART NUMBER

DESIGNATION

20 21 22 23 24 25 26 27 30 40 100 110 120 210 220 250 260 270

1604 9432 01 1626 0154 00 1619 2766 00 0346 1005 19 0147 1323 03 0301 2335 00 0333 3227 00 0266 2110 00 1604 5868 00 0347 6100 21 1604 9431 00 1604 5868 00 0347 6100 21 1604 2786 02 0347 6100 23 1604 9435 01 1604 2785 00 0347 6100 23

PIPE RADIATOR BRACKET HEX. HEAD SCREW PIPE CLAMP HEX. HEAD SCREW PLAIN WASHER LOCK WASHER HEXAGON NUT HOSE HOSE CLAMP PIPE HOSE HOSE CLAMP HOSE HOSE CLAMP PIPE HOSE HOSE CLAMP

1611 7903 69/06

QTY

REF

PART NUMBER

DESIGNATION

1 1 1 1 1 1 1 1 1 2 1 1 2 2 4 1 2 4

- 47 -

QTY

REF

PART NUMBER

DESIGNATION

QTY

AIR INLET - STANDARD

See Page 56 or 74

1611 7904 69_03

See Page 36 See Page 82 or 84

- 48 -

1611 7904 69/03

AIR INLET - STANDARD

REF

PART NUMBER

DESIGNATION

20 30 35 50 55 60 70 75 80 85 90 95 100 105 150 160 165 175 180 185 200 205 210 220 230 250 270

1604 2804 04 0147 1326 03 0301 2335 00 1604 0128 00 0147 1330 12 0333 3227 00 1604 2356 00 0347 6121 00 1604 2758 02 1615 5409 00 0347 6122 00 1626 0025 01 1604 4789 00 0347 6100 26 1604 2804 04 0147 1363 03 0333 3232 00 1604 0128 00 0147 1330 12 0333 3227 00 1604 2356 00 0347 6121 00 1626 0139 01 1615 5409 00 0347 6122 00 1089 0607 08 0661 1014 00

SUPPORT HEX. HEAD SCREW PLAIN WASHER CLAMP (AIRFILTER) HEX. HEAD SCREW LOCK WASHER HUMP HOSE HOSE CLAMP AIR DUCT HOSE HOSE CLAMP PIPE AIR INLET HOSE HOSE CLAMP SUPPORT HEX. HEAD SCREW LOCK WASHER CLAMP (AIRFILTER) HEX. HEAD SCREW LOCK WASHER HUMP HOSE HOSE CLAMP PIPE AIR INLET HOSE HOSE CLAMP WARNING SWITCH SEALING WASHER

1611 7904 69/03

QTY

REF

PART NUMBER

DESIGNATION

1 4 4 2 4 4 2 4 1 1 2 1 1 2 1 4 4 1 4 4 2 4 1 1 2 1 1

- 49 -

QTY

REF

PART NUMBER

DESIGNATION

QTY

OIL SYSTEM - STANDARD

See Page 70 or 71

1611 7906 69_03

See Page 36

- 50 -

1611 7906 69/03

OIL SYSTEM - STANDARD

REF

PART NUMBER

DESIGNATION

50 70 75 80 90 100 120 125 130 260 270 280 290 300

1615 6398 00 0653 1062 00 0686 3716 01 1615 6399 00 0663 7134 00 0147 1363 03 0663 9868 00 0147 1364 03 0333 3232 00 0663 3131 00 0147 1363 03 0333 3232 00 0266 2111 00 -

310 320

0246 1283 04 -

325 330 340 350 360 370 380 385 440 450 460 470 480

0266 2112 00 1626 0222 01 0663 3131 00 0246 1956 42 0333 3232 00 0266 2111 00 1626 0017 01 1615 5664 00 0663 3131 00 0246 1956 42 0333 3232 00 0266 2111 00 1626 0018 01

HOUSING FLAT GASKET HEXAGON PLUG FLANGE O-RING HEX. HEAD SCREW O-RING HEX. HEAD SCREW LOCK WASHER O-RING HEX. HEAD SCREW LOCK WASHER HEXAGON NUT O-RING (Part of service kit, see page 31) STUD LOCK WASHER (Part of service kit, see page 31) HEXAGON NUT HOSE ASSEMBLY O-RING STUD LOCK WASHER HEXAGON NUT HOSE ASSEMBLY HEX. HEAD SCREW O-RING STUD LOCK WASHER HEXAGON NUT HOSE ASSEMBLY

1611 7906 69/03

QTY

REF

PART NUMBER

DESIGNATION

1 2 2 1 1 2 1 3 3 1 2 2 2 1 2 2 2 1 1 2 2 2 1 2 1 2 2 2 1

- 51 -

QTY

REF

PART NUMBER

DESIGNATION

QTY

FUEL SYSTEM - FOR SKID - STANDARD

See Page 110

See Page 58

See Page 62

1611 7910 69_10

- 52 -

1611 7910 69/10

FUEL SYSTEM - FOR SKID - STANDARD

REF

PART NUMBER

DESIGNATION

QTY

REF

PART NUMBER

DESIGNATION

QTY

100 110 120 125 130 390 395 400 415 420 485 490 495 520 525 530 540 550 560 565 570 575 580 590 610 615 620 625 630 650 655

1626 1949 00 1619 2766 00 1089 0659 03 0147 1212 03 0301 2318 00 1604 2742 00 1615 5664 00 1604 6812 00 1619 5337 01 0301 2344 00 1079 5840 21 0653 1128 00 0571 0020 43 3176 1522 00 1604 5828 00 0075 4025 35 0571 0020 72 1604 1384 00 0075 4025 42 0347 6103 00 1079 5840 28 0653 1100 00 1604 2799 00 0347 6103 00 1604 2780 02 0147 1250 03 0347 6108 00 0072 8403 16 1604 4399 01 0075 4025 23 1626 0264 80

SUPPORT HEX. HEAD SCREW LEVEL SENSOR HEX. HEAD SCREW PLAIN WASHER FUEL COOLER HEX. HEAD SCREW FUELFILTER HEX. HEAD SCREW PLAIN WASHER BUSHING FLAT GASKET HOSE NIPPLE NIPPLE HOSE NIPPLE FUEL HOSE ELBOW HOSE NIPPLE FUEL HOSE HOSE CLAMP HEXAGON NIPPLE FLAT GASKET ELBOW HOSE CLAMP GASKET HEX. HEAD SCREW HOSE CLAMP HOSE MANIFOLD FUEL HOSE NIPPLE ASSY.

1 4 1 5 5 1 6 1 2 2 1 1 1 2 2 AR 1 1 AR 1 1 1 1 1 2 4 1 AR 1 AR 1

685 690

0333 3227 00 0266 2110 00

LOCK WASHER HEXAGON NUT

1 1

•A10 •A20 •A30 •A40

1626 0264 00 1626 0265 00 1626 0266 00 0517 1100 31

NIPPLE NIPPLE WASHER BEARING BALL

1 1 1 1

660 665 670

0347 6110 00 1626 0999 00 1626 0375 00

HOSE CLAMP SUPPORT FILTER

2 1 1

•B10

2914 9975 00

FILTER ELEMENT

675 677 680

1615 1789 00 0346 1003 14 0147 1322 03

BRACKET PIPE CLAMP HEX. HEAD SCREW

1 1 1

1611 7910 69/10

- 53 -

REF

PART NUMBER

DESIGNATION

QTY

AIR OUTLET - FOR COMPRESSOR WITH AFTERCOOLER - STANDARD

See Page 70 or 71

1611 7914 69_12

- 54 -

1611 7914 69/12

AIR OUTLET - FOR COMPRESSOR WITH AFTERCOOLER - STANDARD

REF

PART NUMBER

DESIGNATION

QTY

REF

PART NUMBER

DESIGNATION

QTY

REF

PART NUMBER

DESIGNATION

QTY

10 12 13 14 15 16 20 30 32 35 40 42 45 50 51 52 55 60 62 63 65 70 75 76 77 80 90 91 92 93 95 100 110 112 115 117 120 130 140 150 160 180

1626 1244 00 0147 1369 03 0301 2344 00 0266 2111 00 1626 0033 01 0663 7142 00 0634 1000 60 1626 2539 00 1604 0083 00 0147 1962 72 1626 0030 00 0301 2335 00 0261 2110 00 1626 0031 00 0147 1359 03 0301 2344 00 1626 1195 00 1626 0032 00 0147 1402 03 0301 2358 00 0663 7141 00 1604 9816 00 1626 1799 00 0147 1247 03 0301 2321 00 1604 9647 00 1604 2100 01 0246 1283 04 0301 2358 00 0266 2112 00 0663 2107 46 1604 9531 00 1604 9532 01 1626 2539 00 1626 2577 00 0147 1962 72 1604 9533 00 1604 9534 00 0634 1000 57 1604 9548 00 1604 9549 00 1626 0345 01

PLATE HEX. HEAD SCREW PLAIN WASHER HEXAGON NUT PIPE AIR OUTLET O-RING PIPE COUPLING PAD CLAMP BOLT SUPPORT PLAIN WASHER HEXAGON NUT SUPPORT HEX. HEAD SCREW PLAIN WASHER PLATE COOLER AFTER HEX. HEAD SCREW PLAIN WASHER O-RING FAN GUARD HEX. HEAD SCREW PLAIN WASHER COWL FAN SEPARATOR STUD PLAIN WASHER HEXAGON NUT O-RING PIPE PIPE PAD CLAMP PIPE BOLT PIPE PIPE PIPE COUPLING PIPE PIPE PIPE

1 6 6 6 2 2 2 2 2 4 1 2 2 2 20 20 2 2 16 16 4 6 6 24 24 2 2 16 16 16 4 1 1 2 2 4 1 1 8 1 1 1

200 210 220 230 240 250 260 270 300 305 310 315 320 325 330 335 340 345 346 347 350 355 370 380

1604 9552 00 1626 0350 00 1604 9553 01 1604 9557 01 1604 9558 01 1604 9559 01 1604 9560 01 0634 1000 57 0653 1124 00 0603 4200 38 0653 1124 00 0803 5010 08 0653 1124 00 1604 6697 00 0581 1200 27 0070 6002 06 0581 2000 39 0653 1124 00 0607 1100 20 0603 4223 03 0560 0200 23 9090 0510 00 0661 1049 00 1626 2203 80

1 1 1 1 2 1 2 4 2 2 2 2 2 2 2 AR 2 6 2 2 2 2 2 2

580

0623 2111 00

BACKNUT

385 390 400 420 430 440 490 492 495 500 510 520 530 540 550 560 570

0581 1200 27 0070 6002 06 1626 0714 01 1089 0574 70 1089 9579 74 1604 3449 00 1626 2595 00 0301 2344 00 0147 1360 03 1626 0736 00 1626 0261 00 0634 1000 60 1626 0262 00 0147 1362 03 0333 3232 00 0301 2344 00 0852 0010 08

PIPE PIPE PIPE PIPE PIPE PIPE PIPE PIPE COUPLING FLAT GASKET HEXAGON NIPPLE FLAT GASKET STRAINER FLAT GASKET RESTRICTOR ELBOW PIPE COUPLING PLASTIC TUBE PIPE COUPLING FLAT GASKET SOCKET HEXAGON NIPPLE ELBOW SILENCER SEALING WASHER BLEEDER VALVE ASSY (For details see page 105) ELBOW PIPE COUPLING PLASTIC TUBE WIRE HARNESS TEMP.SENSOR PRESSURE SENSOR WIRE HARNESS CLAMP PIPE PLAIN WASHER HEX. HEAD SCREW COVER PROTECT. PIPE PIPE COUPLING PIPE HEX. HEAD SCREW LOCK WASHER PLAIN WASHER BALL VALVE

1611 7914 69/12

- 55 -

2 AR 2 2 2 2 2 2 2 1 2 2 2 4 4 4 2

CONTAINER ASSEMBLY - FOR ON SHORE APPLICATION - STANDARD

See Page 62

1611 7915 69_05

See Page 62

- 56 -

1611 7915 69/05

CONTAINER ASSEMBLY - FOR ON SHORE APPLICATION - STANDARD

REF

PART NUMBER

DESIGNATION

QTY

REF

PART NUMBER

DESIGNATION

•A217 •A220

1619 2766 00 1626 0020 80

•A222 •A225 •A227 •A230

0147 1362 03 0301 2344 00 1619 2766 00 1626 0153 80

•A240 •A250 •A260 •A270

0301 2135 01 0333 2174 37 0147 1326 02 1626 0159 80

•A280 •A290 •A300 •A310 •A320 •A330 •A340 •A350 •A360 •A380 •A390 •A400 •A410 •A420 •A450 •A460 •A500

0301 2135 01 0333 2174 37 0147 1326 02 1604 7554 00 0147 1174 03 1604 7818 00 0147 1362 03 1626 0983 00 0147 1322 03 1626 1006 00 0129 3115 00 1626 1834 00 1619 2766 00 0147 1474 03 1626 2019 00 1626 2020 00 -

•A505 •A510 •A515 •A520 •A525 •A530 •A535 •A540 •A545 •A550 •A555

HEX. HEAD SCREW PANEL ASSY (For details see page 120) HEX. HEAD SCREW PLAIN WASHER HEX. HEAD SCREW DOOR ASSY (For details see page 122) PLAIN WASHER SPRING WASHER HEX. HEAD SCREW DOOR ASSY (For details see page 123) PLAIN WASHER SPRING WASHER HEX. HEAD SCREW RETAINER HEX. HEAD SCREW PANEL HEX. HEAD SCREW BRACKET HEX. HEAD SCREW PLATE BLIND RIVET GRATING HEX. HEAD SCREW HEX. HEAD SCREW PIPE PIPE INSULATION SILENCING FOAM (50 mm) SILENCING FOAM (25 mm) SILENCING FOAM (25 mm) SILENCING FOAM (25 mm) SILENCING FOAM (25 mm) SILENCING FOAM (25 mm) SILENCING FOAM (25 mm) SILENCING FOAM (50 mm) SILENCING FOAM (50 mm) SILENCING FOAM (50 mm) SILENCING FOAM (20 mm) SILENCING FOAM (50 mm)

1604 9721 81

ASSEMBLY

•A20 •A30 •A40

1626 0069 00 0147 1332 03 1604 9724 81

2 8 2

•A50 •A60 •A70 •A75 •A80

0301 2135 01 0333 2174 37 0147 1326 02 1626 1137 00 1604 9723 80

•A90 •A100 •A110 •A120

0301 2135 01 0333 2174 37 0147 1326 02 1604 9722 81

•A125 •A130 •A140 •A145 •A150 •A152 •A155 •A160 •A170

1626 1106 00 0216 1320 00 0147 1362 03 0301 2344 00 1626 0675 00 1088 0801 53 0301 2135 01 0147 1962 72 1604 9875 80

•A175 •A177 •A180

0147 1323 02 0301 2135 01 1604 9727 80

•A183 •A185 •A187 •A190

0686 9253 22 0147 1323 02 0301 2135 01 1604 9627 80

•A200 •A205 •A207 •A210

1626 0439 00 1626 1090 00 0335 1110 00 1626 0021 80

•A212 •A215

0147 1362 03 0301 2344 00

PANEL HEX. HEAD SCREW DOOR (For details see page 117) PLAIN WASHER SPRING WASHER HEX. HEAD SCREW BRACKET DOOR ASSY (For details see page 116) PLAIN WASHER SPRING WASHER HEX. HEAD SCREW DOOR (For details see page 115) PLATE HEX. SOCKET SCREW HEX. HEAD SCREW PLAIN WASHER SUPPORT GROMMET PLAIN WASHER BOLT PANEL ASSY (For details see page 119) HEX. HEAD SCREW PLAIN WASHER PANEL ASSY (For details see page 118) PLUG HEX. HEAD SCREW PLAIN WASHER PANEL ASSY (For details see page 114) CAP PIN GROOVED SPRING WASHER PANEL ASSY (For details see page 121) HEX. HEAD SCREW PLAIN WASHER

1611 7915 69/05

12 12 12 6 2 18 18 18 2 4 12 4 4 2 2 8 8 2 6 6 1 2 6 6 1 2 2 4 1 6 6

- 57 -

QTY

REF

4 2

•A560 •A565 •A570 •A575 •A580 •A585 •A590 •A595

SILENCING FOAM (50 mm) SILENCING FOAM (50 mm) SILENCING FOAM (50 mm) SILENCING FOAM (50 mm) SILENCING FOAM (25 mm) SILENCING FOAM (25 mm) SILENCING FOAM (50 mm) INSULATION SILENCING FOAM (50 mm)

2 2 2 2 2 2 2 2

•A600

•A605

INSULATION SILENCING FOAM (50 mm) INSULATION SILENCING FOAM (50 mm)

6 6 20 2 18 18 18 2 18 18 18 2 16 1 4 2 4 2 56 2 8 10 1 1 2 4 4 2 10 4 2 2 2 2 2 2

PART NUMBER

DESIGNATION

1604 9721 01

CONTAINER

1079 0003 27

1079 0003 31

1079 0003 33

SILENCING FOAM 2000mm x 1500 mm x 20 mm SILENCING FOAM 2000mm x 1500 mm x 25 mm SILENCING FOAM 2000 mm x 1500 mm x 50 mm

QTY

COOLER AND FAN - STANDARD

See Page 82 or 84

REF

PART NUMBER DESIGNATION

1604 7534 85

50 60 80 85 95 100 120 125 150 155 200 205 250 255 325 350

0147 1498 03 0301 2378 00 1626 0925 00 1615 5664 00 1626 0947 00 1615 5664 00 1626 0946 00 1615 5664 00 1604 4243 03 1615 5664 00 2252 2333 00 1615 5664 00 1604 2206 00 1619 5898 01 0686 9252 84 1604 4318 00

COOLER & FAN ASSY (For details see page 101) HEX. HEAD SCREW PLAIN WASHER GRATING HEX. HEAD SCREW GUARD HEX. HEAD SCREW GUARD HEX. HEAD SCREW GRATING HEX. HEAD SCREW BRACKET HEX. HEAD SCREW HOLDER (DOCUMENT) HEX. HEAD SCREW RUBBER PLUG SEAL

QTY

1 5 5 1 3 1 3 1 4 1 3 2 4 1 4 1 AR

1611 7911 69_05

- 58 -

1611 7911 69/05

PIPE - FOR COMPRESSOR WITHOUT INLET SHUTDOWN VALVE - STANDARD

See Page 92

See Page 46

1611 7916 69_03

1611 7916 69/03

- 59 -

REF

PART NUMBER DESIGNATION

20 310

1604 9430 02 0686 9253 12

PIPE PLUG

QTY

1 1

AIR OUTLET - FOR COMPRESSOR WITHOUT AFTERCOOLER - STANDARD

See Page 70 or 71

1611 7918 69_06

- 60 -

1611 7918 69/06

AIR OUTLET - FOR COMPRESSOR WITHOUT AFTERCOOLER - STANDARD

REF

PART NUMBER

DESIGNATION

QTY

10 12 13 14 15 16 20 30 32 35 40 50 90 92 95 100 110 120 130 140 150 160 170 500

1626 1244 00 0147 1369 03 0301 2344 00 0266 2111 00 1626 0033 01 0663 7142 00 0634 1000 60 1626 2539 00 1604 0083 00 0147 1962 72 1626 0678 01 0634 1000 57 1626 2595 00 0301 2344 00 0147 1360 03 1626 0261 00 0634 1000 60 1626 0262 00 0147 1362 03 0333 3232 00 0301 2344 00 0852 0010 08 0623 2111 00 1626 0759 80

PLATE HEX. HEAD SCREW PLAIN WASHER HEXAGON NUT PIPE AIR OUTLET O-RING PIPE COUPLING PAD CLAMP BOLT PIPE PIPE COUPLING CLAMP PIPE PLAIN WASHER HEX. HEAD SCREW PIPE PIPE COUPLING PIPE HEX. HEAD SCREW LOCK WASHER PLAIN WASHER BALL VALVE BACKNUT PANEL ASSEMBLY (For details see page 102)

1 6 6 6 2 2 2 1 2 4 2 2 2 2 2 2 2 2 4 4 4 2 2 1

1611 7918 69/06

REF

PART NUMBER

DESIGNATION

- 61 -

QTY

REF

PART NUMBER

DESIGNATION

QTY

FUEL SYSTEM - FOR CONTAINER - STANDARD

See Page 52 See Page 52

See Page 56 or 74

See Page 52 or 144

1611 7919 69_08

See Page 56 or 74

- 62 -

1611 7919 69/08

FUEL SYSTEM - FOR CONTAINER - STANDARD

REF

PART NUMBER

DESIGNATION

QTY

30 40

1604 3423 00 1626 2173 80

8 1

50 60 70 75 80 85 90 95 100 110 120 125 130 140 150 160 190 195 200 210 220 230 240 250 260 270 370 375 380 385 390 395 800

1604 0248 00 0686 9252 69 0075 4025 35 0075 4025 42 0075 4025 35 0075 4025 42 0075 4025 35 0075 4025 42 1626 2175 00 1626 0023 00 3715 6344 00 3176 6515 00 3176 5427 00 3176 6590 00 1604 1384 00 1604 5828 00 1604 4238 00 0570 0250 06 1604 6111 01 0211 1360 03 1626 1888 00 0147 1962 72 1089 0304 08 0211 1247 03 0301 2321 00 0291 1107 00 0075 4025 35 0075 4025 42 0075 4025 35 0075 4025 42 0075 4025 35 0075 4025 42 1604 9840 00

SCRAPER BOLT FUEL FUNNEL (For details see page 104) RUBBER RING PROTECTION PLUG FUEL HOSE FUEL HOSE FUEL HOSE FUEL HOSE FUEL HOSE FUEL HOSE FUEL FUNNEL PIPE NIPPLE NIPPLE TEE SWIVEL NUT TEE SWIVEL NUT HOSE NIPPLE HOSE NIPPLE HOSE NIPPLE HOSE COUPLING VALVE HEX SOCK. SCREW SUPPORT BOLT SWITCH HEX SOCK. SCREW PLAIN WASHER LOCKNUT FUEL HOSE FUEL HOSE FUEL HOSE FUEL HOSE FUEL HOSE FUEL HOSE LABEL

1611 7919 69/08

REF

PART NUMBER

DESIGNATION

2 2 AR AR AR AR AR AR 1 2 3 3 1 1 5 5 2 2 1 2 1 4 1 2 2 2 AR 1 AR AR AR AR 1

- 63 -

QTY

REF

PART NUMBER

DESIGNATION

QTY

REGULATING SYSTEM FOR SKID - FOR COMPRESSOR WITHOUT FUELXPERT - STANDARD

See Page 94 or 95

See Page 66

See Page 90

1611 7920 69_04

See Page 90

See Page 56 or 74

- 64 -

1611 7920 69/04

REGULATING SYSTEM - FOR COMPRESSOR WITHOUT FUELXPERT - STANDARD

REF

PART NUMBER

DESIGNATION

25 30 50 130 160 165 170 175 180 185 200 220 240 245 250 251 255 260 265 270 275 276 280 285 290 325 327 329 330 335 345 355 365 375 380

0147 1362 03 0301 2344 00 1089 9515 02 0575 0791 57 1079 5840 19 0653 1124 00 0653 1062 00 1615 9643 00 0653 1062 00 1619 5205 00 0603 4102 03 0564 0000 24 0653 1062 00 0581 0028 01 0575 0102 04 0395 1010 43 0653 1124 00 0581 0034 00 0653 1062 00 0581 0028 01 0575 0102 11 0395 1010 47 0653 1062 00 0581 0028 01 1615 9643 00 0581 0028 01 0653 1062 00 0564 0000 24 0653 1062 00 1615 9643 00 1503 2566 11 0581 0028 01 0395 1010 57 0581 0028 01 -

390 395 396 397 400

1604 5758 01 0581 0000 67 0070 6002 10 0581 1200 30 1503 2566 11

HEX. HEAD SCREW PLAIN WASHER SOLENOID VALVE HOSE ASSEMBLY HEXAGON NIPPLE FLAT GASKET FLAT GASKET REDUCER FOR SCAVENGE PIPE FLAT GASKET NIPPLE HEXAGON NIPPLE TEE FLAT GASKET STRAIGHT PIPE COUPLING HOSE ASSEMBLY INSULATING HOSE FLAT GASKET STRAIGHT PIPE COUPLING FLAT GASKET STRAIGHT PIPE COUPLING HOSE ASSEMBLY INSULATING HOSE FLAT GASKET STRAIGHT PIPE COUPLING REDUCER FOR SCAVENGE PIPE STRAIGHT PIPE COUPLING FLAT GASKET TEE FLAT GASKET REDUCER FOR SCAVENGE PIPE TEE STRAIGHT PIPE COUPLING INSULATING HOSE STRAIGHT PIPE COUPLING FLAT GASKET (Part of service kit, see page 28) ADAPTER STRAIGHT PIPE COUPLING PLASTIC TUBE ELBOW PIPE COUPLING TEE

1611 7920 69/04

QTY

REF

PART NUMBER

DESIGNATION

2 2 1 1 2 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 1 1 1 1 1 1 1 1

410

420 425 430 435

1079 5840 35 0575 0403 55 1079 5840 02 0653 1124 00

FLAT GASKET (Part of service kit, see page 28) NIPPLE HOSE ASSEMBLY HEXAGON NIPPLE FLAT GASKET

1 1 AR 1 1

- 65 -

QTY

1 1 1 1 1

REF

PART NUMBER

DESIGNATION

QTY

ELECTRICAL SYSTEM - FOR SKID - STANDARD

See Page 38

See Page 56 or 74

See Page 92

1611 7923 69_11

See Page 39 or 132

- 66 -

1611 7923 69/11

ELECTRICAL SYSTEM - FOR SKID - STANDARD

REF

PART NUMBER

DESIGNATION

55 60 65 120 125 130 132 136 137 140 141 142 143 155 160 195 260 281 285 290 295 300 301 302 305 310 315 320 340 350 360 380 387 410 411 412 415 420

0147 1360 03 1604 0383 00 1088 0019 02 1089 9206 32 1615 6170 00 1626 0856 00 1604 5166 00 1604 7846 00 1604 6019 00 1604 8147 00 1619 3729 00 0147 1321 03 0333 3227 00 1626 0696 01 1089 0574 70 1089 9579 80 1604 3433 01 1604 3679 00 5541 9781 00 0301 2321 00 1604 4353 00 1604 9671 00 1604 9748 00 1604 9749 00 0147 1244 03 1604 6542 01 0147 1246 03 0301 2321 00 0686 9252 47 1088 1508 90 1088 0011 90 1626 0458 00 1619 5898 01 1604 4594 03 1604 7864 00 1089 0584 01 1615 5664 00 1604 2124 81

425 430 435

1503 1056 00 1089 9385 02 0147 1321 03

HEX. HEAD SCREW SEAL (OIL SEPARATOR) CONTACT WASHER CIRCUIT BREAKER BATTERY CABLE BATTERY CABLE BATTERY CABLE CABLE (ELEC) CABLE (ELEC) BATTERY CABLE PROTECT.CAP HEX. HEAD SCREW LOCK WASHER WIRE HARNESS TEMP.SENSOR PRESSURE SENSOR WIRE SEAL HEX. HEAD SCREW PLAIN WASHER WASHER RELAY CABLE (ELEC) CABLE (ELEC) HEX. HEAD SCREW BRACKET HEX. HEAD SCREW PLAIN WASHER PROTECTING PLUG CONNECTOR ASSY CONNECTOR ASSY GUIDE HEX. HEAD SCREW SUPPORT SUPPORT BATTERY SWITCH HEX. HEAD SCREW POWER SUPPLY BOX ASSY (For details see page 97) SEAL ISOLATOR HEX. HEAD SCREW

1611 7923 69/11

QTY

REF

PART NUMBER

DESIGNATION

QTY

1 2 2 1 1 1 1 1 1 1 1 8 8 1 1 1 1 1 4 4 4 1 1 1 2 1 4 4 4 1 1 1 4 2 1 1 2 1

440 445 450 455 460 465 470 475 480 485 490 495 500 505 600 605 610 615 616 617 620 625 630 635 640 645 650

0333 3227 00 0301 2335 00 1604 2121 01 0147 1323 03 0333 3227 00 0301 2335 00 0324 1800 27 1088 0019 01 0266 2110 00 0070 4024 14 1604 2121 01 0147 1323 03 0333 3227 00 0301 2335 00 1613 0801 00 0333 3220 00 0333 3220 00 0266 2108 00 1619 2766 00 1613 0808 00 1089 9562 05 1088 0019 01 0147 1322 03 1089 9562 08 1088 0019 02 0147 1360 03 1626 0717 00

LOCK WASHER PLAIN WASHER STRIP HEX. HEAD SCREW LOCK WASHER PLAIN WASHER DISTANCE PIECE CONTACT WASHER HEXAGON NUT HOSE STRIP HEX. HEAD SCREW LOCK WASHER PLAIN WASHER PIPE CLAMP LOCK WASHER LOCK WASHER HEXAGON NUT HEX. HEAD SCREW BRACKET EARTHING STRAP CONTACT WASHER HEX. HEAD SCREW EARTHING STRAP CONTACT WASHER HEX. HEAD SCREW GUIDE

2 2 1 2 2 2 2 2 2 2 1 2 2 2 10 5 5 4 1 1 1 1 1 1 1 1 1

AR 2 2

- 67 -

REF

PART NUMBER

DESIGNATION

QTY

DRAINS - FOR SKID - STANDARD

See Page 46 See Page 50

1611 7925 69_05

- 68 -

1611 7925 69/05

DRAINS - FOR SKID - STANDARD

REF

PART NUMBER

DESIGNATION

20 22 25 35 36 37 40 45 48 50 55 60 75 80 90 95 100 105 106 110 120 125 130 132 135 140 145 200 205 210 220 225 230 232 235 237 238 300

1079 5840 15 0661 1033 00 1626 1112 00 0571 0035 53 1088 0832 02 0129 3110 00 1619 6153 05 0571 0035 52 1604 3383 00 0661 1038 00 0661 1038 00 0686 3716 35 0346 1002 10 1619 2766 00 0147 1322 03 0261 1110 00 0661 1038 00 0627 4200 07 1615 9099 02 1604 8367 00 0571 0035 36 1619 6153 05 0571 0035 52 1604 3383 00 0661 1038 00 0661 1038 00 0686 3716 35 1626 1119 00 0627 5100 05 0653 1124 00 0571 0035 36 1619 6153 05 0571 0035 52 1604 3383 00 0661 1038 00 0661 1038 00 0686 3716 35 0653 1124 00

NIPPLE SEALING WASHER HOSE ASSEMBLY NIPPLE CABLE CLAMP BLIND RIVET BALL VALVE HEXAGON NIPPLE HEXAGON NIPPLE SEALING WASHER SEALING WASHER HEXAGON PLUG PIPE CLAMP HEX. HEAD SCREW HEX. HEAD SCREW HEXAGON NUT SEALING WASHER PRESSURE SCREW NIPPLE HOSE HEXAGON NIPPLE BALL VALVE HEXAGON NIPPLE HEXAGON NIPPLE SEALING WASHER SEALING WASHER HEXAGON PLUG HOSE ASSEMBLY PRESSURE SCREW FLAT GASKET HEXAGON NIPPLE BALL VALVE HEXAGON NIPPLE HEXAGON NIPPLE SEALING WASHER SEALING WASHER HEXAGON PLUG FLAT GASKET

1611 7925 69/05

QTY

REF

PART NUMBER

DESIGNATION

1 1 1 1 9 9 1 1 1 1 1 1 2 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1

305 306 307 310 320 325 330 332 335 340 345 400

0603 5110 00 1619 6153 05 0571 0035 36 1626 1136 00 0571 0035 36 1619 6153 05 0571 0035 52 1604 3383 00 0661 1038 00 0661 1038 00 0686 3716 35 -

405 410 420 425 430 432 435 440 445 500 505 510 520 525 530 532 535 540 545

1079 5840 15 1626 1104 00 0571 0035 36 1619 6153 05 0571 0035 52 1604 3383 00 0661 1038 00 0661 1038 00 0686 3716 35 1626 1057 00 0627 5100 05 0653 1124 00 0571 0035 36 1619 6153 05 0571 0035 52 1604 3383 00 0661 1038 00 0661 1038 00 0686 3716 35

HEXAGON NIPPLE BALL VALVE HEXAGON NIPPLE HOSE ASSEMBLY HEXAGON NIPPLE BALL VALVE HEXAGON NIPPLE HEXAGON NIPPLE SEALING WASHER SEALING WASHER HEXAGON PLUG FLAT GASKET (Part of service kit, see page 32) NIPPLE HOSE ASSEMBLY HEXAGON NIPPLE BALL VALVE HEXAGON NIPPLE HEXAGON NIPPLE SEALING WASHER SEALING WASHER HEXAGON PLUG HOSE ASSEMBLY PRESSURE SCREW FLAT GASKET HEXAGON NIPPLE BALL VALVE HEXAGON NIPPLE HEXAGON NIPPLE SEALING WASHER SEALING WASHER HEXAGON PLUG

- 69 -

QTY

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

REF

PART NUMBER

DESIGNATION

QTY

VALVES ON VESSEL - FOR EC - STANDARD

See Page 82 or 84

REF

PART NUMBER DESIGNATION

QTY

20 25 30 35 100 105 115 120 150 200 205 210 215 220 222 223 225 230

0372 4100 08 3163 1853 00 3163 1852 00 0832 1000 75 1626 2716 00 1202 5869 01 2254 7257 00 1202 8040 02 1089 9579 75 0562 4509 03 1615 6942 00 1079 3471 11 0075 4005 57 0560 1009 04 0603 4150 60 0653 1254 00 1619 2766 00 0346 1005 19

2 1 1 1 1 1 3 3 1 1 2 2 AR 1 1 2 1 1

BOW SHACKLE CHAIN WIRE MESH HOSE SAFETY VALVE MINIMUM PRESSURE VALVE THERMOSTAT NIPPLE OILFILTER PRESSURE SENSOR BEND NIPPLE HOSE CLIP RUBBER TUBE ELBOW HEXAGON NIPPLE FLAT GASKET HEX. HEAD SCREW PIPE CLAMP

See Page 50

1611 7928 69_05

- 70 -

1611 7928 69/05

VALVES ON VESSEL - FOR ASME - STANDARD

See Page 82 or 84

See Page 50

1611 7929 69_05

1611 7929 69/05

- 71 -

REF

PART NUMBER DESIGNATION

QTY

22 25 30 90 95 100 120 125 130 135 155 220 225 230 250 255 260 270 280 290 300

0372 4100 08 3163 1853 00 3163 1852 00 0661 1049 00 1604 3759 00 0832 1001 71 1626 2716 00 1202 5869 01 1202 8040 02 2254 7257 00 1089 9579 74 0560 1009 04 0603 4150 60 0653 1254 00 0560 1309 03 0603 4150 56 1615 6942 00 1079 3471 11 0075 4005 57 0346 1005 19 1619 2766 00

2 1 1 1 1 1 1 1 3 3 1 1 1 2 1 1 2 2 AR 1 1

BOW SHACKLE CHAIN WIRE MESH HOSE SEALING WASHER BUSHING SAFETY VALVE MINIMUM PRESSURE VALVE THERMOSTAT OILFILTER NIPPLE PRESSURE SENSOR ELBOW HEXAGON NIPPLE FLAT GASKET ELBOW BUSHING NIPPLE HOSE CLIP RUBBER TUBE PIPE CLAMP HEX. HEAD SCREW

EXHAUST - FOR OFF SHORE APPLICATION - STANDARD

Engine Part

1611 7947 69_01

- 72 -

1611 7947 69/01

EXHAUST - FOR OFF SHORE APPLICATION - STANDARD

REF

PART NUMBER

DESIGNATION

10 30 40 50 60 100 110

1626 0301 00 1604 2548 00 1604 7819 01 0147 1362 03 0300 0274 93 1626 0980 00 1626 0981 00

PIPE CLAMP MUFFLER HEX. HEAD SCREW PLAIN WASHER INSULATION THERMAL INSULATION THERMAL

1611 7947 69/01

QTY

REF

PART NUMBER

DESIGNATION

1 1 1 6 6 1 1

- 73 -

QTY

REF

PART NUMBER

DESIGNATION

QTY

CONTAINER ASSEMBLY - FOR OFF SHORE APPLICATION - STANDARD

See Page 62

See Page 62 1611 7948 69_04

See Page 62

- 74 -

1611 7948 69/04

CONTAINER ASSEMBLY - FOR OFF SHORE APPLICATION - STANDARD

REF

PART NUMBER

DESIGNATION

QTY

REF

PART NUMBER

DESIGNATION

QTY

REF

PART NUMBER

DESIGNATION

•A335 •A340 •A350 •A360 •A380 •A390 •A400 •A410 •A450 •A460 •A500

1088 0801 52 0147 1362 03 1626 0983 00 0147 1322 03 1626 1006 00 0129 3115 00 1626 2728 00 1619 2766 00 1626 2019 00 1626 2020 00 -

2 4 2 4 2 56 2 8 1 1 6

1079 0003 32

SILENCING FOAM

1079 0003 33

SILENCING FOAM

•A505

•A510

•A515

•A520

•A525

•A530

•A535

•A540

•A545

•A550

•A555

•A560

•A565

•A570

GROMMET HEX. HEAD SCREW BRACKET HEX. HEAD SCREW PLATE BLIND RIVET GRATING HEX. HEAD SCREW PIPE PIPE INSULATION SILENCING FOAM (50 mm) INSULATION SILENCING FOAM (50 mm) INSULATION SILENCING FOAM (50 mm) INSULATION SILENCING FOAM (50 mm) INSULATION SILENCING FOAM (50 mm) INSULATION SILENCING FOAM (50 mm) INSULATION SILENCING FOAM (50 mm) INSULATION SILENCING FOAM (30 mm) INSULATION SILENCING FOAM (50 mm) INSULATION SILENCING FOAM (50 mm) INSULATION SILENCING FOAM (50 mm) INSULATION SILENCING FOAM (50 mm) INSULATION SILENCING FOAM (30 mm) INSULATION SILENCING FOAM (50 mm) INSULATION SILENCING FOAM (50 mm)

CONTAINER

1626 2535 80

CONTAINER ASSEMBLY

•A20 •A30 •A40

1626 2691 00 0147 1332 03 1626 2534 80

2 8 2

•A80

1626 2533 80

•A120

1626 2532 80

•A130 •A140 •A145 •A150 •A152 •A160 •A170

0216 1320 00 0147 1362 03 0301 2344 00 1626 0675 00 1088 0801 53 0147 1962 72 1626 2694 80

•A175 •A180

0147 1323 02 1626 2689 80

•A183 •A185 •A200 •A205 •A207 •A210

0686 9253 22 0147 1323 02 1626 0439 00 1626 1090 00 0335 1110 00 1626 0021 80

•A212 •A215 •A217 •A220

0147 1362 03 0301 2344 00 1619 2766 00 1626 0020 80

•A222 •A225 •A227 •A230

0147 1362 03 0301 2344 00 1619 2766 00 1626 2531 80

•A270

1626 2530 80

•A310 •A320 •A330

1604 7554 00 0147 1174 03 1604 7818 01

PANEL HEX. HEAD SCREW DOOR ASSY (For details see page 128) DOOR ASSY (For details see page 127) DOOR ASSY (For details see page 126) HEX. SOCKET SCREW HEX. HEAD SCREW PLAIN WASHER SUPPORT GROMMET BOLT PANEL ASSEMBLY (For details see page 130) HEX. HEAD SCREW ROOF ASSY (For details see page 129) PLUG HEX. HEAD SCREW CAP PIN GROOVED SPRING WASHER PANEL ASSY (For details see page 121) HEX. HEAD SCREW PLAIN WASHER HEX. HEAD SCREW PANEL ASSY (For details see page 120) HEX. HEAD SCREW PLAIN WASHER HEX. HEAD SCREW DOOR ASSY (For details see page 125) DOOR ASSY (For details see page 124) RETAINER HEX. HEAD SCREW BOX

1611 7948 69/04

2 2 12 4 4 2 2 8 2 6 2 2 6 2 2 4 1 6 6 4 2 6 6 20 2 2 2 16 1

1626 2535 00

- 75 -

4 2 1 1 2 2 2 1 1 1 1 2 1 1

2000 mm x 1500 mm x 30 mm 2000 mm x 1500 mm x 50 mm

QTY

MARKINGS - STANDARD

1611 7955 69_05

- 76 -

1611 7955 69/05

MARKINGS - STANDARD

REF

PART NUMBER

DESIGNATION

20 22 25 30 35 65 70 75 85 90 95 100 110 150

0690 1150 00 0690 1101 47 1079 9903 59 1079 9903 62 1079 9903 36 1079 9922 09 1079 9924 91 1079 9922 07 1079 9902 49 1079 9903 58 1079 9921 03 1079 9910 02 1626 1910 00 -

155 170 200 210

0129 3270 34 1079 9902 39 1079 9927 38 1079 9927 39

HOUSE MARK HOUSE MARK WHITE INFORMATION LABEL INFORMATION LABEL DECAL INFORMATION LABEL INFORMATION LABEL INFORMATION LABEL INFORMATION LABEL INFORMATION LABEL INFORMATION LABEL INFORMATION LABEL LABEL PLATE DATA (Not available separately) BLIND RIVET INFORMATION LABEL INFORMATION LABEL LABEL

1611 7955 69/05

QTY

REF

PART NUMBER

DESIGNATION

1 1 1 2 1 1 1 1 5 1 1 1 1 1 4 1 2 1

- 77 -

QTY

REF

PART NUMBER

DESIGNATION

QTY

MARKINGS - L/S - STANDARD

1611 7956 69_03

- 78 -

1611 7956 69/03

MARKINGS - L/S - STANDARD

REF

PART NUMBER

DESIGNATION

QTY

20 40 45 50 55 60 65 70 75 80 100

1626 0900 95 1079 9902 45 1079 9903 60 1079 9927 18 1079 9905 41 1079 9908 37 1079 9908 38 1604 9840 00 1079 9925 00 1079 9910 99 1604 3317 21

DECAL UNIT INFORMATION LABEL INFORMATION LABEL LABEL INSTRUCTION LABEL INSTRUCTION LABEL INSTRUCTION LABEL LABEL INFORMATION LABEL INFORMATION LABEL LABEL

2 1 1 1 1 1 1 1 1 1 1

1611 7956 69/03

REF

PART NUMBER

DESIGNATION

- 79 -

QTY

REF

PART NUMBER

DESIGNATION

QTY

MARKINGS - CFM - STANDARD

1611 7958 69_03

- 80 -

1611 7958 69/03

MARKINGS - CFM - STANDARD

REF

PART NUMBER

DESIGNATION

20 40 45 50 55 60 65 70 75 80 100

1626 0900 96 1079 9902 45 1079 9903 60 1079 9927 18 1079 9905 41 1079 9908 37 1079 9908 38 1604 9840 00 1079 9925 00 1079 9910 99 1604 3317 21

DECAL UNIT INFORMATION LABEL INFORMATION LABEL LABEL INSTRUCTION LABEL INSTRUCTION LABEL INSTRUCTION LABEL LABEL INFORMATION LABEL INFORMATION LABEL LABEL

1611 7958 69/03

QTY

REF

PART NUMBER

DESIGNATION

2 1 1 1 1 1 1 1 1 1 1

- 81 -

QTY

REF

PART NUMBER

DESIGNATION

QTY

AIR FILTER AND COOLER PLATE - FOR ON SHORE APPLICATION - STANDARD

See Page 48

1611 7960 69_04

- 82 -

1611 7960 69/04

AIR FILTER AND COOLER PLATE - FOR ON SHORE APPLICATION - STANDARD

REF

PART NUMBER

DESIGNATION

QTY

1604 0120 01

AIR FILTER

•A10 •A20 •A30

2914 5017 00 2914 5018 00 2914 8662 00

AIR FILTER ELEMENT AIR FILTER SAFETY CARTRIDGE COVER AIR FILTER

1 1 1

50 110 120 130 140 150

1079 9927 32 1626 0542 00 1626 0997 00 1626 0558 00 1626 0557 00 1626 0556 00

INFORMATION LABEL PLATE PLATE PLATE PLATE PLATE

1 2 2 2 2 4

1611 7960 69/04

REF

PART NUMBER

DESIGNATION

- 83 -

QTY

REF

PART NUMBER

DESIGNATION

QTY

AIR FILTER AND COOLER PLATE - FOR OFF SHORE APPLICATION - STANDARD

See Page 48

1611 7961 69_04

- 84 -

1611 7961 69/04

AIR FILTER AND COOLER PLATE - FOR OFF SHORE APPLICATION - STANDARD

REF

PART NUMBER

DESIGNATION

QTY

1604 7697 00

FILTER

•A10 •A20 •A30

2914 5077 00 2914 5018 00 2914 8662 00

FILTER ELEMENT AIR FILTER SAFETY CARTRIDGE COVER AIR FILTER

1 1 1

50 110 120 130 140 150

1079 9927 37 1626 2385 00 1626 2386 00 1626 0558 00 1626 0557 00 1626 0556 00

INFORMATION LABEL PLATE PLATE PLATE PLATE PLATE

1 2 2 2 2 4

1611 7961 69/04

REF

PART NUMBER

DESIGNATION

- 85 -

QTY

REF

PART NUMBER

DESIGNATION

QTY

CLAMPING - STANDARD

1611 7970 69_04

- 86 -

1611 7970 69/04

CLAMPING - STANDARD

REF

PART NUMBER

DESIGNATION

QTY

REF

PART NUMBER

DESIGNATION

20 25 45 50 55 60 65 70 100 105 110 150 155 160 165 170 250 255 260 265 270 275 280 285 300 305 350 360 365 370 375 380 385 390 395 400 405 410 415 420 425 430

1604 2745 03 1619 2766 00 1615 5664 00 1613 0801 07 0147 1323 03 0266 2108 00 0301 2321 00 0333 3220 00 0348 0110 03 0129 3110 00 0348 0101 05 1604 2765 02 0147 1251 03 0266 2108 00 0301 2321 00 0333 3220 00 1615 5619 00 0147 1400 03 0333 3237 00 1613 0801 04 0147 1251 03 0266 2108 00 0301 2321 00 0333 3220 00 1088 0832 06 0129 3110 00 1604 4381 01 1613 0808 00 1613 0803 02 0147 1247 03 0333 3220 00 0266 2108 00 1619 5898 01 2252 2333 00 1613 0801 03 0147 1247 03 0333 3220 00 0266 2108 00 1615 5664 00 1613 0808 00 1613 0802 00 0147 1247 03

CABLE GUIDE HEX. HEAD SCREW HEX. HEAD SCREW PIPE CLAMP HEX. HEAD SCREW HEXAGON NUT PLAIN WASHER LOCK WASHER ANCHOR PLATE BLIND RIVET CABLE TIE GUIDE HEX. HEAD SCREW HEXAGON NUT PLAIN WASHER LOCK WASHER BRACKET HEX. HEAD SCREW LOCK WASHER PIPE CLAMP HEX. HEAD SCREW HEXAGON NUT PLAIN WASHER LOCK WASHER CLAMP BLIND RIVET GUIDE BRACKET PIPE CLAMP HEX. HEAD SCREW LOCK WASHER HEXAGON NUT HEX. HEAD SCREW BRACKET PIPE CLAMP HEX. HEAD SCREW LOCK WASHER HEXAGON NUT HEX. HEAD SCREW BRACKET PIPE CLAMP HEX. HEAD SCREW

1 3 2 11 4 4 4 4 56 61 81 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 1 3 12 6 6 6 6 3 8 3 3 3 3 1 1 1

435 440 450 455 460 465 470 480 485 490

0333 3220 00 0266 2108 00 1613 0801 08 1615 5664 00 0147 1247 03 0333 3220 00 0266 2108 00 1613 2679 00 0147 1358 03 0301 2344 00

LOCK WASHER HEXAGON NUT PIPE CLAMP HEX. HEAD SCREW HEX. HEAD SCREW LOCK WASHER HEXAGON NUT SUPPORT HEX. HEAD SCREW PLAIN WASHER

1611 7970 69/04

- 87 -

QTY

1 1 1 1 1 1 1 1 1 1

REF

PART NUMBER

DESIGNATION

QTY

ELECTRICAL SYSTEM - FOR CONTAINER - STANDARD

See Page 56 or 74

See Page 92

1611 7971 69_02

- 88 -

1611 7971 69/02

ELECTRICAL SYSTEM - FOR CONTAINER - STANDARD

REF

PART NUMBER

DESIGNATION

QTY

1626 1896 80

ELECTR. SYSTEM

•A20 •A30 •A40 •A50 •A60

1626 1896 00 1089 0362 99 1089 9422 07 1089 9422 90 1089 0362 28

WIRE HOLDER EMERGENCY STOP CONTACT BLOCK PROTECTIVE COLLAR

2 1 1 1 1

30 50 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240

0129 3271 03 1626 1835 00 1626 0769 01 1089 9428 01 1089 0263 26 1089 0263 16 1089 9206 32 1626 0818 01 1615 5664 00 1089 9430 01 1604 0996 00 0162 4174 00 0333 3214 00 0266 2106 00 1088 0801 22 1089 9429 10 0301 2321 00

BLIND RIVET WIRE HARNESS WIRE HARNESS LAMP SOCKET SELECTOR SWITCH CONTACT BLOCK CIRCUIT BREAKER SUPPORT HEX. HEAD SCREW HORN SEAL SLOTTED SCREW LOCK WASHER HEXAGON NUT GROMMET FLASH LIGHT PLAIN WASHER

9 2 1 4 1 2 1 1 2 2 2 4 4 4 4 4 8

1611 7971 69/02

REF

PART NUMBER

DESIGNATION

- 89 -

QTY

REF

PART NUMBER

DESIGNATION

QTY

REGULATING SYSTEM FOR CONTAINER - FOR COMPRESSOR WITHOUT FUELXPERT - STANDARD

See Page 94 or 95

See Page 64 1611 7984 69_00

- 90 -

1611 7984 69/00

REGULATING SYSTEM FOR CONTAINER - FOR COMPRESSOR WITHOUT FUELXPERT - STANDARD

REF

PART NUMBER

DESIGNATION

QTY

20 30 40 50 60

1626 2520 00 0575 0102 58 0575 0102 38 0575 0102 42 0575 0102 57

BRACKET HOSE ASSEMBLY HOSE ASSEMBLY HOSE ASSEMBLY FLEXIBLE

1 1 1 1 1

1611 7984 69/00

REF

PART NUMBER

DESIGNATION

- 91 -

QTY

REF

PART NUMBER

DESIGNATION

QTY

ELECTRICAL SYSTEM - FOR COMPRESSOR WITHOUT OILTRONIX FOR SKID - STANDARD

REF

PART NUMBER DESIGNATION

100

1900 1039 11

110 120 130

1626 2698 00 1626 2697 00 1619 2766 00

CUBICLE (For details see page 106) SUPPORT SUPPORT HEX. HEAD SCREW

QTY

1 1 1 4

See Page 56 or 74

1611 7973 69_02

- 92 -

1611 7973 69/02

PLUGS - FOR COMPRESSOR WITHOUT PREHEATER - STANDARD

See Page 92

1611 8051 67_05

1611 8051 67/05

- 93 -

REF

PART NUMBER DESIGNATION

40 45 300 310

0686 4201 03 0653 1046 00 0686 9252 75 0686 9253 12

HEXAGON PLUG FLAT GASKET PROTECTION PLUG PLUG

QTY

1 1 1 1

OIL SEPARATOR ASSEMBLY AND REGULATING VALVE - FOR COMPRESSOR WITHOUT COLD WEATHER EQUIPMENTS FOR EC - STANDARD

REF

PART NUMBER DESIGNATION

1604 2598 92

1626 1052 80

50 55 60 65 300 310

0686 3716 02 0653 1124 00 0560 4401 72 0686 3115 76 0686 9252 75 0686 9252 84

See Page 92

OILSEP. ASSY EC (For details see page 98) VALVE REGULATOR (For details see page 103) HEXAGON PLUG FLAT GASKET STREET TEE PLUG PROTECTION PLUG RUBBER PLUG

QTY

1 1 1 1 1 1 1 1

See Page 56 or 74

1611 8490 67_17

- 94 -

1611 8490 67/17

OIL SEPARATOR ASSEMBLY AND REGULATING VALVE - FOR COMPRESSOR WITHOUT COLD WEATHER EQUIPMENTS FOR ASME - STANDARD

REF

PART NUMBER DESIGNATION

1604 2598 93

1626 1052 80

50 55 60 65 300 310

0686 3716 02 0653 1124 00 0560 4401 72 0686 3115 76 0686 9252 75 0686 9252 84

See Page 92

See Page 56 or 74

1611 8495 67_18

1611 8495 67/18

- 95 -

OILSEP. ASSY ASME (For details see page 99) VALVE REGULATOR (For details see page 103) HEXAGON PLUG FLAT GASKET STREET TEE PLUG PROTECTION PLUG RUBBER PLUG

QTY

1 1 1 1 1 1 1 1

GEARS - 1: 2,241 - STANDARD

REF

PART NUMBER DESIGNATION

QTY

1202 8598 80

GEAR SET

•A20 •A30

1202 8598 00 1202 8599 00

GEAR WHEEL GEAR WHEEL

1 1

See Page 35

1611 8133 69_01

- 96 -

1611 8133 69/01

POWER SUPPLY BOX ASSEMBLY - STANDARD

REF

1604 2124 81_00

1604 2124 81/00

- 97 -

PART NUMBER DESIGNATION

QTY

1604 2124 81

POWER SUPPLY BOX ASSY

(From page 66)

•10 •20 •30 •40 •50

1604 2124 04 1604 2153 01 0301 2321 00 0147 1249 03 1088 1001 02

POWER SUPPLY BOX LID OF POWER SUPPLY BOX PLAIN WASHER HEX. HEAD SCREW WARNING MARK

1 1 4 4 1

OIL SEPARATOR ASSEMBLY - FOR EC - STANDARD

REF

PART NUMBER DESIGNATION

QTY

1604 2598 92

OILSEP. ASSY EC

•20 •21 •22 •25 •30

1604 2594 04 0147 1336 03 0301 2335 00 0663 3134 00 1604 2597 90

•31 •35

0246 1956 29 -

•40

•45 •50

1604 2592 03 -

•55 •60 •63 •64 •65 •66 •67 •70 •75 •80 •85 •90

1604 2596 01 1616 5108 00 1604 5746 00 0147 1322 03 1604 5757 00 1604 5745 00 0147 1320 03 0147 1371 12 0324 1000 27 1604 2725 00 1604 2726 00 1604 2727 00

ADAPTER HEX. HEAD SCREW PLAIN WASHER O-RING PRESS. VESSEL ASSY EC (For details see page 108) STUD SEAL (OIL SEPARATOR) (Part of service kit, see page 30) OILSEP.ELEMENT (Part of service kit, see page 30) TUBE SEAL (OILSEPARATOR) (Part of service kit, see page 30) RETAINER LEVEL GAUGE GASKET HEX. HEAD SCREW ADAPTER RETAINER HEX. HEAD SCREW HEX. HEAD SCREW DISTANCE SLEEVE BUFFER WASHER WASHER

(From page 94) 1 4 4 1 1 2 1 1 1 1 1 1 1 4 1 1 1 4 4 8 4 4

1604 2598 92_00

- 98 -

1604 2598 92/00

OIL SEPARATOR ASSEMBLY - FOR ASME - STANDARD

REF

1604 2598 93_00

1604 2598 93/00

- 99 -

PART NUMBER DESIGNATION

QTY

1604 2598 93

OILSEP. ASSY ASME (From page 95, 146)

•20 •21 •22 •25 •30

1604 2594 04 0147 1336 03 0301 2335 00 0663 3134 00 1604 2756 82

•31 •35

0246 1956 29 -

•40

•45 •50

1604 2592 03 -

•55 •60 •63 •64 •65 •66 •67 •70 •75 •80 •85 •90

1604 2596 01 1616 5108 00 1604 5746 00 0147 1322 03 1604 5757 00 1604 5745 00 0147 1320 03 0147 1371 12 0324 1000 27 1604 2725 00 1604 2726 00 1604 2727 00

ADAPTER HEX. HEAD SCREW PLAIN WASHER O-RING PRESS. VESSEL ASSY ASME (For details see page 109) STUD SEAL (OIL SEPARATOR) (Part of service kit, see page 30) OILSEP.ELEMENT (Part of service kit, see page 30) TUBE SEAL (OILSEPARATOR) (Part of service kit, see page 30) RETAINER LEVEL GAUGE GASKET HEX. HEAD SCREW ADAPTER RETAINER HEX. HEAD SCREW HEX. HEAD SCREW DISTANCE SLEEVE BUFFER WASHER WASHER

1 4 4 1 1 2 1 1 1 1 1 1 1 4 1 1 1 4 4 8 4 4

HOUSING - STANDARD

REF

PART NUMBER DESIGNATION

1604 6109 80

•20

•25 •30 •35 •45

1614 9921 00 2255 2813 00 2253 3565 00 -

•50

•55 •60 •65 •70

2252 6269 00 0335 2145 00 0686 3716 02 -

•75

0686 3115 20

HOUSING

QTY

(From page 36)

HOUSING (Not available separately) VALVE OILSTOP PISTON REDUCER SEALING WASHER (Part of service kit, see page 31) COMPR.SPRING (Part of service kit, see page 31) SPRING GUIDE CIRCLIP HEXAGON PLUG SEALING WASHER (Part of service kit, see page 31) PLUG

1 1 1 1 1 1 1 1 1 1 1

1604 6109 80_02

- 100 -

1604 6109 80/02

COOLER AND FAN ASSEMBLY - STANDARD

REF

See Page 42

1604 7534 85_01

1604 7534 85/01

- 101 -

PART NUMBER DESIGNATION

QTY

1604 7534 85

COOLER & FAN ASSY(From page 58)

•20

1604 3701 86

•25

1604 7535 85

COOLER (For details see page 110) FAN DRIVE ASSY (For details see page 113)

1 1

PANEL ASSEMBLY - STANDARD

REF

PART NUMBER DESIGNATION

1626 0759 80

PANEL ASSEMBLY

•20 •30 •40

1626 0759 00 -

COVER PROTECT. INSULATION (50 mm) INSULATION (50 mm)

1079 0003 33

SILENCING FOAM

QTY

(From page 60) 1 2 1

2000 mm x 1500 mm x 50 mm

1626 0759 80_01

- 102 -

1626 0759 80/01

REGULATING VALVE - STANDARD

REF

1626 1052 80_02

1626 1052 80/02

- 103 -

PART NUMBER DESIGNATION

QTY

1626 1052 80

VALVE REGULATOR (From page 94, 95)

•20 •30 •35 •40

1626 1051 00 2252 4057 00 0147 1249 03 -

•45

•50 •55

1604 7076 00 -

•60 •65

2252 4058 00 -

•70 •75 •80

2252 1428 00 2252 4059 00 -

•85 •95 •100 •105 •110

1626 1052 00 1604 4289 00 0268 4138 22 0663 2135 00 -

•115 •120

1626 1053 00 0663 2105 61

HOUSING VALVE BALL CAGE HEX. HEAD SCREW SPRING (Part of service kit, see page 29) BEARING BALL (Part of service kit, see page 29) MEMBRANE O-RING (Part of service kit, see page 29) SPRING GUIDE O-RING (Part of service kit, see page 29) SPRING SPRING SEAT O-RING (Part of service kit, see page 29) COVER VALVE SCREW HEXAGON NUT O-RING FILTER (Part of service kit, see page 29) HOUSING FILTER O-RING

1 1 8 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 2

FUEL FUNNEL - STANDARD

REF

PART NUMBER DESIGNATION

QTY

1626 2173 80

FUEL FUNNEL

•20 •30 •50 •55 •60 •65 •70 •75 •80 •90 •95 •100 •105 •110 •115 •120 •130 •140 •150 •160 •170 •180 •190 •200

1626 2173 00 1619 5188 00 0147 1246 02 0291 1128 01 1089 0304 08 0291 1128 01 0211 1959 22 0301 2121 01 1604 6111 01 0211 1959 40 0300 0276 00 3176 6515 00 3715 6344 00 1604 1384 00 1604 5828 00 0661 1033 00 0603 4200 10 0661 1033 00 1615 8744 01 0661 1033 00 0603 5522 03 0661 1038 00 1615 8745 01 1626 2238 01

FUEL FUNNEL SEAL HEX. HEAD SCREW LOCKNUT SWITCH LOCKNUT HEXAGON SOCKET SCREW PLAIN WASHER VALVE HEX SOCK. SCREW PLAIN WASHER NIPPLE NIPPLE HOSE NIPPLE HOSE NIPPLE SEALING WASHER HEXAGON NIPPLE SEALING WASHER QUICK COUPLING SEALING WASHER HEXAGON NIPPLE SEALING WASHER QUICK COUPLING PLATE

(From page 62) 1 AR 3 3 1 2 2 8 1 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1

1626 2173 80_03

- 104 -

1626 2173 80/03

BLEEDER VALVE ASSEMBLY - STANDARD

REF

See Page 54

1626 2203 80_01

1626 2203 80/01

- 105 -

PART NUMBER DESIGNATION

QTY

1626 2203 80

BLEEDER VALVE ASSY(From page 54)

•20 •30 •40 •50 •60

1626 2203 00 1612 0686 00 0663 3117 00 1612 0687 00 1612 0688 00

BLEEDER VALVE HOUSING SPRING O-RING VALVE LOCK SPRING

1 1 1 1 1

CUBICLE - STANDARD

REF

PART NUMBER DESIGNATION

1900 1039 11

CUBICLE

•10 •250 •260 •360 •370 •380 •390 •400 •500 •510 •520 •530 •540 •560 •570 •580

1626 3071 00 0698 5140 73 0697 9809 22 1089 0577 12 1089 0577 31 1089 0577 21 1089 0577 82 0993 7106 00 1089 9206 12 1089 9206 59 1089 0341 02 1604 3672 01 1089 9472 96 1089 9479 05 1089 0263 71 1089 0648 11

CUBICLE CABLE GLAND LOCK NUT TERMINAL TERMINAL END SECTION PLATE MOUNTING RAIL CIRCUIT BREAKER PROTECTION CAP RELAY RELAY CIRCUIT BREAKER TIMER RELAY SWITCH RELAY

QTY

(From page 92) 1 2 2 12 1 1 2 AR 8 8 6 6 2 1 1 1

1900 1039 11_02

- 106 -

1900 1039 11/02

UNLOADER ASSEMBLY - STANDARD

REF

2252 5502 93_02

2252 5502 93/02

- 107 -

PART NUMBER DESIGNATION

2252 5502 93

•20

•30 •35

0147 1327 03 -

•40

•55 •65

2252 5503 00 -

•70

•75 •80 •85

1604 6215 00 1613 2913 00 0686 1610 00

UNLOADER ASSY

QTY

(From page 36)

CONNECTION (Not available separately) HEX. HEAD SCREW PLAIN WASHER (Part of service kit, see page 28) UNLOADER HOUS. (Not available separately) VALVE SEALRING (Part of service kit, see page 28) GASKET (Part of service kit, see page 28) VALVE PLUG CORE PLUG

1 6 6 1 1 1 1 1 1 1

PRESSURE VESSEL ASSEMBLY - FOR EC - STANDARD

REF

PART NUMBER DESIGNATION

QTY

1604 2597 90

PRESS. VESSEL ASSY EC(From page 98)

•20 •25 •30 •35 •40

2250 2528 00 0653 1227 00 0686 3716 02 0661 1033 00 -

•45 •50 •55

0147 1481 03 1604 2598 03 1604 2597 03

PLUG SCREW FLAT GASKET HEXAGON PLUG SEALING WASHER O-RING (Part of service kit, see page 30) HEX. HEAD SCREW COVER VESSEL EC

1 1 1 1 1 18 1 1

1604 2597 90_03

- 108 -

1604 2597 90/03

PRESSURE VESSEL ASSEMBLY - FOR ASME - STANDARD

REF

1604 2756 82_04

1604 2756 82/04

- 109 -

PART NUMBER DESIGNATION

QTY

1604 2756 82

PRESS. VESSEL ASSY ASME

(From page 99)

•20 •25 •30 •35 •40

2250 2528 00 0653 1227 00 0686 3716 02 0661 1033 00 -

•45 •50 •55

0147 1481 03 1604 2598 03 1604 2756 02

PLUG SCREW FLAT GASKET HEXAGON PLUG SEALING WASHER O-RING (Part of service kit, see page 30) HEX. HEAD SCREW COVER VESSEL ASME

1 1 1 1 1 18 1 1

COOLER - STANDARD

1604 3701 86_04

- 110 -

1604 3701 86/04

COOLER - STANDARD

REF

PART NUMBER

DESIGNATION

1604 3701 86 1626 0438 01 1604 3701 01 1604 2495 01 0196 1362 00 1604 3702 01 1604 2662 01 0686 3716 02 0661 1033 00 0196 1362 00 0075 4005 70 0347 6110 00 1089 0659 53 0661 1023 00 1615 9329 00 1604 2812 02 1088 0801 28 0129 3115 00 1088 1301 02 0348 0110 13 1088 1301 02 1604 4747 01 0196 1362 00 1604 2496 00 1088 0801 33 1604 3736 02 1604 3703 04 1088 0803 25 0147 1362 03 0301 2344 00 1615 5664 00 1604 2504 01 1615 5664 00 1604 2503 01 -

COOLER (From page 101) SUPPORT 1 SILENCING FOAM (50 mm) 1 PAD 1 OILCOOLER 1 SET SCREW 2 RADIATOR 1 CAP 1 HEXAGON PLUG 1 SEALING WASHER 1 SET SCREW 2 RUBBER TUBE AR HOSE CLAMP 2 LEVEL SWITCH 2 SEALING WASHER 2 NIPPLE 2 WIRING 1 GROMMET 1 BLIND RIVET 4 CABLE STRIP 5 ANCHOR PLATE 4 CABLE STRIP 4 COOLER 1 SET SCREW 2 GROMMET 1 GROMMET 1 BEAM 1 SILENCING FOAM (50 mm) 1 SILENCING FOAM (50 mm) 1 SILENCING FOAM (50 mm) 1 BEAM 1 SILENCING FOAM (50 mm) 1 SILENCING FOAM (50 mm) 1 GROMMET 1 HEX. HEAD SCREW 6 PLAIN WASHER 6 HEX. HEAD SCREW 3 PLATE 1 SILENCING FOAM (50 mm) 1 HEX. HEAD SCREW 9 PLATE 1 SILENCING FOAM (50 mm) 2

•20 •21 •30 •40 •50 •60 ••A10 •61 •62 •65 •70 •75 •85 •86 •87 •90 •91 •92 •94 •96 •98 •100 •105 •113 •114 •115 •116 •117 •118 •120 •121 •122 •123 •130 •140 •145 •150 •151 •155 •170 •171

1604 3701 86/04

QTY

REF

PART NUMBER

DESIGNATION

QTY

REF

PART NUMBER

DESIGNATION

QTY

•175 •190 •191 •192 •193 •194 •195 •210 •211 •220 •221 •225 •260 •265 •267 •270 •275 •300 •310 •350 •355 •360 •390 •430 •440 •445 •450 •455 •460 •461 •465 •470 •475 •480 •485 •490 •495 •500 •505 •520 •530 •535

1615 5664 00 1604 9892 01 1615 5664 00 1626 1806 00 1626 0738 01 1615 5664 00 1604 3748 00 0147 1326 03 0301 2335 00 0291 1110 00 1615 5664 00 1604 2643 01 1615 5664 00 0147 1323 03 0301 2335 00 0291 1110 00 1615 5664 00 1604 9433 00 1604 2770 01 1615 5664 00 2252 6291 01 0347 6100 21 1604 2786 02 1604 2785 00 0347 6100 23 1604 2769 01 1615 5664 00 1604 2586 01 1604 2464 01 0663 3131 00 0246 1956 42 0333 3232 00 0266 2111 00 1604 2771 01 1615 5664 00 1604 2496 00

HEX. HEAD SCREW COWL SILENCING FOAM (50 mm) SILENCING FOAM (50 mm) SILENCING FOAM (50 mm) SILENCING FOAM (50 mm) HEX. HEAD SCREW PLATE SILENCING FOAM (50 mm) PLATE SILENCING FOAM (50 mm) HEX. HEAD SCREW COVER HEX. HEAD SCREW PLAIN WASHER LOCKNUT HEX. HEAD SCREW GUARD HEX. HEAD SCREW HEX. HEAD SCREW PLAIN WASHER LOCKNUT HEX. HEAD SCREW PIPE PIPE HEX. HEAD SCREW HOSE HOSE CLAMP HOSE HOSE HOSE CLAMP PIPE HEX. HEAD SCREW PIPE PIPE O-RING STUD LOCK WASHER HEXAGON NUT PLATE HEX. HEAD SCREW GROMMET

9 1 1 1 1 1 8 1 1 1 1 12 2 6 6 6 6 2 8 2 2 2 4 1 1 4 4 8 2 2 12 2 4 1 1 2 4 4 4 2 4 2

•600 •605

1619 5562 00 1619 5562 00

SEAL SEAL

AR AR

1079 0003 33

SILENCING FOAM 2000 mm x 1500 mm x 50 mm

- 111 -

CONTROL BOX - STANDARD

REF

1604 4248 82_00

- 112 -

PART NUMBER DESIGNATION 1604 4248 82

•10

•20 •30 •40 •43 •45 •47 •50 •60 •70 •80 •90 •100 •110 •120 •130 •140 •150 •160 •170 •180 •190 •200 •210 •220 •230 •240 •250 •260 •270 •280 •290 •300 •310 •320 •330 •340 •350 •360 •370

1604 4247 00 0226 0300 48 1604 4263 80 1604 1758 00 1604 5825 00 1604 5827 00 1604 4270 00 1604 1795 00 0333 3210 00 0211 1106 03 1089 0263 27 1089 0565 40 1089 0631 02 1604 1785 00 1604 2193 01 1604 7601 00 1604 1784 01 0160 0996 91 1604 1336 01 1604 7602 00 1604 7275 00 0333 3114 01 0211 1170 03 1604 4271 00 1604 1347 00 1604 2194 00 1604 2199 00 0301 2309 00 0211 1107 03 1604 4262 80 1604 4300 00 1604 1757 00 1604 2169 00 0211 1173 03 1604 4274 00 1604 2160 00 0301 2315 00 1604 1780 00 1604 4247 80

CONTROL BOX HOUSING (Not available separately) DISPLAY TAPPING SCREW PCB WIRE HARNESS CABLE CABLE SEAL PLATE LOCK WASHER HEX SOCK. SCREW SELECTOR SWITCH PRESSURE GAUGE FUEL GAUGE PLATE BRACKET HINGE PLATE CROSS REC SCREW SPACER LOCK PCB LOCK WASHER HEX SOCK. SCREW SEAL PLATE COVER COVER PLAIN WASHER HEX SOCK. SCREW PCB SEAL HOUSING PLATE HEX SOCK. SCREW SEAL PLATE PLAIN WASHER SCREEN DECAL ASSEMBLY (For details see page 131)

QTY

(From page 38) 1 1 12 1 1 1 1 1 1 14 6 1 1 1 1 1 2 1 8 1 1 1 23 9 1 1 1 1 8 8 1 1 1 1 14 1 1 10 1 1

1604 4248 82/00

FAN DRIVE ASSEMBLY - STANDARD

REF

See Page 42

1604 7535 85_02

1604 7535 85/02

- 113 -

•25 ••A10 ••A20 ••A30 ••A40 ••A50 ••A60 ••A70 •70 •73 •75 •80 •85 •90 •110 •115 •120 •125 •140 ••B20 ••B25 ••B30 ••B35 ••B40 ••B45 ••B50 ••B55 ••B60 •145 •150 •155 •160 •165 •167 •168 •170 •175 •180 •185

PART NUMBER DESIGNATION 1604 7535 85 1604 2455 81 1604 2455 01 0335 2160 00 0335 1140 00 0502 2240 00 0502 2235 00 0335 2157 00 1615 5436 01 0147 1403 03 0301 2358 00 0291 1112 00 1626 0437 00 0147 1477 03 0301 2378 00 1626 0668 00 0108 1320 00 1615 5439 00 0147 1363 15 1615 6034 80 0335 2146 00 0291 1112 00 1615 5447 00 1615 6036 00 0502 1100 12 0147 1410 03 1615 5446 01 1615 6034 00 1615 5443 00 0147 1412 03 0147 1377 03 1604 2665 00 1615 6048 00 0147 1244 03 0333 3220 00 1615 5540 00 0147 1379 12 0266 2111 00 0147 1326 03 0301 2335 00

QTY

FAN DRIVE ASSY (From page 101) FAN SHAFT ASSY 1 FAN SHAFT 1 CIRCLIP 1 CIRCLIP 1 BALL BEARING 1 BALL BEARING 1 CIRCLIP 1 HOUSING 1 HEX. HEAD SCREW 4 PLAIN WASHER 4 LOCKNUT 4 SUPPORT 1 HEX. HEAD SCREW 2 PLAIN WASHER 2 FAN 1 SPRING PIN 1 CLAMP RING 1 HEX. HEAD SCREW 6 TENSION PULLEY ASSY 1 CIRCLIP 1 LOCKNUT 1 WASHER 1 SPACER 1 BALL BEARING 2 HEX. HEAD SCREW 1 SPACER 1 TENSION PULLEY 1 TENSIONER 1 HEX. HEAD SCREW 1 HEX. HEAD SCREW 1 SPACER 1 POINTER 1 HEX. HEAD SCREW 2 LOCK WASHER 2 LEVER 1 HEX. HEAD SCREW 1 HEXAGON NUT 1 HEX. HEAD SCREW 2 PLAIN WASHER 2

PANEL ASSEMBLY - STANDARD

REF

PART NUMBER DESIGNATION

QTY

1604 9627 80

PANEL ASSY

•20 •50 •60 •70 •170

1604 9627 00 -

ROOF SILENCING FOAM (50 mm) SILENCING FOAM (50 mm) SILENCING FOAM (50 mm) SILENCING FOAM (50 mm)

(From page 56)

1079 0003 33

SILENCING FOAM 2000 mm x 1500 mm x 50 mm

1 3 2 1 1

1604 9627 80_00

- 114 -

1604 9627 80/00

DOOR - STANDARD

REF

1604 9722 81_02

1604 9722 81/02

- 115 -

PART NUMBER DESIGNATION

QTY

1604 9722 81

DOOR

•20 •25 •30 •40 •55 •60 •65 •70 •75 •150

1604 9722 01 1626 1106 00 1604 4867 00 0216 1320 00 1604 4317 00 1626 1102 00 0147 1326 02 0301 2135 01 0266 1110 02 -

DOOR PLATE HINGE HEX. SOCKET SCREW SEAL LOCK HEX. HEAD SCREW PLAIN WASHER HEXAGON NUT INSULATION SILENCING FOAM (50 mm)

(From page 56)

1079 0003 33

SILENCING FOAM 2000 mm x 1500 mm x 50 mm

1 2 2 9 AR 1 12 24 12 1

DOOR ASSEMBLY - STANDARD

REF

PART NUMBER DESIGNATION

•20 •30 •32 •40 •45 •50 •55 •60 •65 •70 •75 •80 •85

1604 9723 80 1604 9723 00 1604 2859 00 1626 2038 00 0147 1326 02 0333 2174 37 0301 2135 01 1604 4317 00 1626 1102 00 0147 1326 02 0301 2135 01 0266 1110 02 1626 0598 00 -

•90 •100 •110 •120 •125 •130 •135 •150 •160 •170 •180 •190

0147 1247 03 0266 2108 00 0301 2321 00 1626 0712 00 0147 1326 02 0301 2135 01 0266 1110 02 -

1079 0003 31

1079 0003 33

QTY

DOOR ASSY (From page 56) PANEL 1 HINGE 3 WASHER 3 HEX. HEAD SCREW 9 SPRING WASHER 9 PLAIN WASHER 9 SEAL AR LOCK 1 HEX. HEAD SCREW 12 PLAIN WASHER 24 HEXAGON NUT 12 BAFFLE AR INSULATION 13 SILENCING FOAM (25 mm) HEX. HEAD SCREW 78 HEXAGON NUT 78 PLAIN WASHER 78 PLATE AR HEX. HEAD SCREW 4 PLAIN WASHER 4 HEXAGON NUT 4 SILENCING FOAM (50 mm) 1 SILENCING FOAM (50 mm) 1 SILENCING FOAM (50 mm) 1 SILENCING FOAM (50 mm) 1 SILENCING FOAM (25 mm) 1

SILENCING FOAM 2000 mm x 1500 mm x 25 mm SILENCING FOAM 2000 mm x 1500 mm x 50 mm

1604 9723 80_03

- 116 -

1604 9723 80/03

DOOR - STANDARD

REF

1604 9724 81_01

1604 9724 81/01

- 117 -

PART NUMBER DESIGNATION

•20 •25 •27

1604 9724 81 1604 9724 01 1626 1081 00 -

•30 •35 •55 •60 •70 •80 •85

1619 2766 00 1604 4317 00 0147 1326 03 0301 2335 00 1626 0636 00 -

•90 •100 •110 •150 •160 •170 •180

0147 1247 03 0266 2108 00 0301 2321 00 -

1079 0003 31

1079 0003 33

QTY

DOOR (From page 56) PANEL 1 PANEL 1 INSULATION 1 SILENCING FOAM (50 mm) HEX. HEAD SCREW 6 SEAL AR HEX. HEAD SCREW 54 PLAIN WASHER 54 SILENCING FOAM (50 mm) 9 BAFFLE AR INSULATION 6 SILENCING FOAM (25 mm) HEX. HEAD SCREW 36 HEXAGON NUT 36 PLAIN WASHER 36 SILENCING FOAM (50 mm) 2 SILENCING FOAM (50 mm) 1 SILENCING FOAM (50 mm) 1 SILENCING FOAM (25 mm) 1

SILENCING FOAM 2000 mm x 1500 mm x 25 mm SILENCING FOAM 2000 mm x 1500 mm x 50 mm

PANEL ASSEMBLY - STANDARD

REF

PART NUMBER DESIGNATION

QTY

1604 9727 80

PANEL ASSY

•20 •50 •60 •70

1604 9727 00 -

ROOF SILENCING FOAM (50 mm) SILENCING FOAM (50 mm) SILENCING FOAM (50 mm)

(From page 56)

1079 0003 33

SILENCING FOAM 2000 mm x 1500 mm x 50 mm

1 3 2 1

1604 9727 80_01

- 118 -

1604 9727 80/01

PANEL ASSEMBLY - STANDARD

REF

1604 9875 80_01

1604 9875 80/01

- 119 -

PART NUMBER DESIGNATION

QTY

1604 9875 80

PANEL ASSY

•20 •50

1604 9875 00 -

COVER SILENCING FOAM (50 mm)

(From page 56)

1079 0003 33

SILENCING FOAM 2000 mm x 1500 mm x 50 mm

1 1

PANEL ASSEMBLY - STANDARD

REF

PART NUMBER DESIGNATION

QTY

•20 •50 •60

1626 0020 80 1626 0020 01 1626 1212 00

PANEL ASSY (From page 56, 74) ROOF 1 SILENCING FOAM (50 mm) 1 INSULATION SILENCING FOAM (50 mm) 1

1079 0003 33

SILENCING FOAM 2000 mm x 1500 mm x 50 mm

1626 0020 80_01

- 120 -

1626 0020 80/01

PANEL ASSEMBLY - STANDARD

REF

1626 0021 80_01

1626 0021 80/01

- 121 -

PART NUMBER DESIGNATION

QTY

1626 0021 80

PANEL ASSY

•20 •50

1626 0021 00 -

ROOF INSULATION SILENCING FOAM (50 mm)

(From page 56, 74)

1079 0003 33

SILENCING FOAM 2000 mm x 1500 mm x 50 mm

1 1

DOOR ASSEMBLY - STANDARD

REF

PART NUMBER DESIGNATION

QTY

1626 0153 80

DOOR ASSY

•20 •25 •35 •40 •45 •50 •55 •80 •85 •90 •95 •100 •110 •120 •150 •160 •170 •180

1626 0153 00 1626 1100 00 1604 9878 00 0147 1326 02 0333 2174 37 0301 2135 01 1604 4317 00 1626 0649 00 1626 0650 00 0147 1174 03 0266 2106 00 0301 2315 00 -

•190

DOOR PLATE HINGE HEX. HEAD SCREW SPRING WASHER PLAIN WASHER SEAL BAFFLE SILENCING FOAM (25 mm) BAFFLE SILENCING FOAM (25 mm) HEX. HEAD SCREW HEXAGON NUT PLAIN WASHER SILENCING FOAM (50 mm) SILENCING FOAM (50 mm) SILENCING FOAM (25 mm) INSULATION SILENCING FOAM (50 mm) INSULATION SILENCING FOAM (50 mm)

1079 0003 31

1079 0003 33

(From page 56) 1 3 3 9 9 9 AR AR 16 AR 15 124 124 124 1 1 1 1 1

SILENCING FOAM 2000mm x 1500 mm x 25 mm SILENCING FOAM 2000 mm x 1500 mm x 50 mm

1626 0153 80_02

- 122 -

1626 0153 80/02

DOOR ASSEMBLY - STANDARD

REF

1626 0159 80_02

1626 0159 80/02

- 123 -

PART NUMBER DESIGNATION

QTY

1626 0159 80

DOOR ASSY

•20 •25 •30 •40 •45 •50 •55 •60 •65 •70 •75 •80 •85 •90 •95 •100 •110 •120 •150

1626 0159 00 1626 1100 00 1604 9878 00 0147 1326 02 0333 2174 37 0301 2135 01 1604 4317 00 1626 1103 00 0147 1326 02 0301 2135 01 0266 1110 02 1626 0649 00 1626 0650 00 0147 1174 03 0266 2106 00 0301 2315 00 -

•160

1626 1218 00

•170 •180 •190

DOOR PLATE HINGE HEX. HEAD SCREW SPRING WASHER PLAIN WASHER SEAL LOCK HEX. HEAD SCREW PLAIN WASHER HEXAGON NUT BAFFLE SILENCING FOAM (25 mm) BAFFLE SILENCING FOAM (25 mm) HEX. HEAD SCREW HEXAGON NUT PLAIN WASHER INSULATION SILENCING FOAM (50 mm) INSULATION SILENCING FOAM (50 mm) SILENCING FOAM (50 mm) SILENCING FOAM (50 mm) SILENCING FOAM (25 mm)

1079 0003 31

1079 0003 33

(From page 56)

SILENCING FOAM 2000mm x 1500 mm x 25 mm SILENCING FOAM 2000 mm x 1500 mm x 50 mm

1 3 3 9 9 9 AR 1 12 24 12 AR 15 AR 16 124 124 124 1 1 1 1 1

DOOR ASSEMBLY - STANDARD

REF

PART NUMBER DESIGNATION

QTY

1626 2530 80

DOOR ASSY

•20 •60 •75 •80 •85 •90 •95 •100 •110 •120 •150

1626 2530 00 1626 2555 00 0266 1110 02 1626 2545 00 1626 2546 00 0147 1174 03 0266 2106 00 0301 2315 00 -

•160

•170 •180 •190

•200

DOOR LOCK HEXAGON NUT BAFFLE SILENCING FOAM (25 mm) BAFFLE SILENCING FOAM (25 mm) HEX. HEAD SCREW HEXAGON NUT PLAIN WASHER INSULATION SILENCING FOAM (50 mm) INSULATION SILENCING FOAM (50 mm) SILENCING FOAM (50 mm) SILENCING FOAM (50 mm) INSULATION SILENCING FOAM (50 mm) INSULATION SILENCING FOAM (50 mm)

1079 0003 31

1079 0003 33

(From page 74) 1 2 12 16 16 15 15 124 124 124 2 1 1 1 1 1

SILENCING FOAM 2000mm x 1500 mm x 25 mm SILENCING FOAM 2000 mm x 1500 mm x 50 mm

1626 2530 80_00

- 124 -

1626 2530 80/00

DOOR ASSEMBLY - STANDARD

REF

1626 2531 80_00

1626 2531 80/00

- 125 -

PART NUMBER DESIGNATION

QTY

1626 2531 80

DOOR ASSY

•20 •30 •80 •85 •90 •95 •100 •110 •120 •150 •160 •170

1626 2531 00 1626 2569 00 1626 2545 00 1626 2546 00 0147 1174 03 0266 2106 00 0301 2315 00 -

•180

•190

•200

•210

DOOR LOCK BAFFLE SILENCING FOAM (25 mm) BAFFLE SILENCING FOAM (25 mm) HEX. HEAD SCREW HEXAGON NUT PLAIN WASHER SILENCING FOAM (50 mm) SILENCING FOAM (50 mm) INSULATION SILENCING FOAM (50 mm) INSULATION SILENCING FOAM (50 mm) INSULATION SILENCING FOAM (50 mm) INSULATION SILENCING FOAM (30 mm) INSULATION SILENCING FOAM (30 mm)

1079 0003 31

1079 0003 32

1079 0003 33

(From page 74)

SILENCING FOAM 2000mm x 1500 mm x 25 mm SILENCING FOAM 2000 mm x 1500 mm x 30 mm SILENCING FOAM 2000 mm x 1500 mm x 50 mm

1 1 16 16 15 15 124 124 124 1 1 2 1 1 1 1

DOOR ASSEMBLY - STANDARD

REF

PART NUMBER DESIGNATION

QTY

1626 2532 80

DOOR ASSY

•20 •30 •40 •60 •75 •150

1626 2532 00 1626 2693 00 0216 1320 00 1626 2550 00 0266 1110 02 -

DOOR HINGE HEX. SOCKET SCREW LOCK HEXAGON NUT INSULATION SILENCING FOAM (50 mm)

(From page 74)

1079 0003 33

SILENCING FOAM 2000 mm x 1500 mm x 50 mm

1 3 9 1 12 1

1626 2532 80_00

- 126 -

1626 2532 80/00

DOOR ASSEMBLY - STANDARD

REF

1626 2533 80_00

1626 2533 80/00

- 127 -

PART NUMBER DESIGNATION

QTY

1626 2533 80

DOOR ASSY

•20 •30 •32 •55 •60 •75 •80 •85

1626 2533 00 1626 2693 00 1626 2038 00 1626 2549 00 1626 2550 00 0266 1110 02 1626 2211 00 -

•90 •100 •110 •120 •135 •150 •160 •170 •180

0147 1247 03 0266 2108 00 0301 2321 00 1626 0712 00 0266 1110 02 -

DOOR HINGE WASHER SEAL LOCK HEXAGON NUT BAFFLE INSULATION SILENCING FOAM (25 mm) HEX. HEAD SCREW HEXAGON NUT PLAIN WASHER PLATE HEXAGON NUT SILENCING FOAM (50 mm) SILENCING FOAM (50 mm) SILENCING FOAM (50 mm) SILENCING FOAM (50 mm)

(From page 74)

1079 0003 31

1079 0003 33

SILENCING FOAM 2000mm x 1500 mm x 25 mm SILENCING FOAM 2000 mm x 1500 mm x 50 mm

1 3 3 1 1 12 13 13 78 78 78 AR 4 1 1 1 1

DOOR ASSEMBLY - STANDARD

REF

PART NUMBER DESIGNATION

QTY

1626 2534 80

DOOR ASSY

•20 •25 •27

1626 2534 00 1626 2210 00 -

•30 •55 •60 •80 •85

1619 2766 00 0147 1326 03 0301 2335 00 1626 2662 00 -

•90 •100 •110 •150 •160 •170

0147 1247 03 0266 2108 00 0301 2321 00 -

PANEL PANEL INSULATION SILENCING FOAM (50 mm) HEX. HEAD SCREW HEX. HEAD SCREW PLAIN WASHER BAFFLE INSULATION SILENCING FOAM (25 mm) HEX. HEAD SCREW HEXAGON NUT PLAIN WASHER SILENCING FOAM (50 mm) SILENCING FOAM (50 mm) SILENCING FOAM (50 mm)

(From page 74)

1079 0003 31

1079 0003 33

1 1 1 6 54 54 7 7 36 36 36 2 1 1

SILENCING FOAM 2000mm x 1500 mm x 25 mm SILENCING FOAM 2000 mm x 1500 mm x 50 mm

1626 2534 80_00

- 128 -

1626 2534 80/00

ROOF ASSEMBLY - STANDARD

REF

1626 2689 80_01

1626 2689 80/01

- 129 -

PART NUMBER DESIGNATION

QTY

1626 2689 80

ROOF ASSY

•20 •50

1626 2689 00 -

•60

•70

•80

•90

ROOF INSULATION SILENCING FOAM (50 mm) INSULATION SILENCING FOAM (50 mm) INSULATION SILENCING FOAM (50 mm) INSULATION SILENCING FOAM (50 mm) INSULATION SILENCING FOAM (50 mm)

(From page 74)

1079 0003 33

SILENCING FOAM 2000 mm x 1500 mm x 50 mm

1 1 1 1 1 2

PANEL ASSEMBLY - STANDARD

REF

PART NUMBER DESIGNATION

QTY

1626 2694 80

PANEL ASSEMBLY

•20 •30

1626 2694 00 -

PLATE SILENCING FOAM (50 mm)

(From page 74)

1079 0003 33

SILENCING FOAM 2000 mm x 1500 mm x 50 mm

1 1

1626 2694 80_01

- 130 -

1626 2694 80/01

DECAL ASSEMBLY - STANDARD

REF

1604 4247 80_00

1604 4247 80/00

- 131 -

PART NUMBER DESIGNATION

1604 4247 80

DECAL ASSEMBLY

•10 •20

1604 4248 00 1604 4249 00

DECAL DECAL

QTY

(From page 112) 1 1

BATTERIES - FOR COMPRESSOR WITH COLD WEATHER EQUIPMENTS - OPTIONS

REF

PART NUMBER DESIGNATION

20 25 30 31 35 40 50 55 60 65

0975 8300 18 1604 8360 02 0147 1326 03 0324 1130 00 0301 2335 00 0266 2110 00 1604 8365 00 0211 1322 03 1604 9555 00 1604 8416 00

BATTERY SUPPORT HEX. HEAD SCREW DISTANCE SLEEVE PLAIN WASHER HEXAGON NUT BRACKET HEX SOCK. SCREW COVER CABLE (ELEC)

QTY

2 2 2 2 2 2 4 8 1 1

See Page 66

1611 7503 67_04

- 132 -

1611 7503 67/04

PIPE - FOR COMPRESSOR WITH INLET SHUTDOWN VALVE - OPTIONS

See Page 46 See Page 92

1611 7917 69_01

1611 7917 69/01

- 133 -

REF

PART NUMBER DESIGNATION

10 20 25 30 40 50 60 70 80 90 100 110 120 130 140

1604 3555 00 1626 0586 00 1626 0587 00 1604 3560 00 0347 6120 00 0347 6100 26 1604 3557 00 0147 1323 03 0266 2110 00 1604 3709 01 1089 0341 02 0147 1204 03 0333 3150 00 1604 3672 01 1604 3742 00

VALVE PIPE PIPE AIR INLET HOSE HOSE CLAMP HOSE CLAMP BRACKET HEX. HEAD SCREW HEXAGON NUT CABLE RELAY HEX. HEAD SCREW LOCK WASHER RELAY CONNECTION

QTY

1 1 1 2 2 2 2 4 4 1 1 1 1 1 1

COSMOS - GLOBAL COVERAGE WITH GPRS NETWORK - OPTIONS

REF

PART NUMBER DESIGNATION

30 32 40 42 110 120 122 130

0147 1322 03 0301 2335 00 1604 7456 00 0147 1247 03 1089 9593 97 1604 7628 01 1088 1301 03 1604 7945 00

HEX. HEAD SCREW PLAIN WASHER BRACKET HEX. HEAD SCREW ANTENNA WIRING CABLE STRIP COSMOS MODULE

QTY

4 4 1 2 1 1 15 1

See Page 56 or 74

1611 7505 67_03

- 134 -

1611 7505 67/03

COSMOS - GLOBAL COVERAGE WITH CDMA NETWORK - OPTIONS

See Page 56 or 74

1611 7506 67_03

1611 7506 67/03

- 135 -

REF

PART NUMBER DESIGNATION

30 32 40 42 50 110 120 122

0147 1322 03 0301 2335 00 1604 7456 00 0147 1247 03 1604 8945 00 1089 9593 97 1604 7628 01 1088 1301 03

HEX. HEAD SCREW PLAIN WASHER BRACKET HEX. HEAD SCREW COSMOS MODULE ANTENNA WIRING CABLE STRIP

QTY

4 4 1 2 1 1 1 15

OIL SYSTEM - FOR COMPRESSOR WITH AUTO OILER TANK - OPTIONS

See Page 56 or 74

1611 7964 69_01

- 136 -

1611 7964 69/01

OIL SYSTEM - FOR COMPRESSOR WITH AUTO OILER TANK - OPTIONS

REF

PART NUMBER

DESIGNATION

QTY

20 30 40 50 60 80 90 100 110 120 130 140 145 150 160 170 180 190 200 210 220 230 235 240 250 260 270 280 290

0663 9197 01 1626 1584 00 0147 1326 03 0301 2335 00 0571 0020 41 0075 4025 35 0571 0020 81 0605 8350 95 0571 0020 41 0075 4025 35 0571 0020 40 1626 1341 00 1619 2766 00 1615 9589 00 0347 6102 00 0099 9910 29 0603 4104 03 1619 6153 04 9000 0244 00 0347 6107 00 0072 8403 16 0346 1000 17 0147 1244 03 1626 1385 00 0147 1360 03 0301 2344 00 1604 6771 00 0147 1247 03 0301 2321 00

O-RING COVER HEX. HEAD SCREW PLAIN WASHER HOSE NIPPLE FUEL HOSE HOSE NIPPLE BUSHING HOSE NIPPLE FUEL HOSE HOSE NIPPLE TANK OIL HEX. HEAD SCREW NIPPLE HOSE CLAMP PLASTIC TUBE HEXAGON NIPPLE BALL VALVE HOSE NIPPLE HOSE CLAMP HOSE PIPE CLAMP HEX. HEAD SCREW SUPPORT HEX. HEAD SCREW PLAIN WASHER VALVE HEX. HEAD SCREW PLAIN WASHER

1 1 2 2 1 AR 1 1 1 AR 1 1 6 2 2 AR 1 1 1 2 AR 1 1 1 2 2 1 2 2

1611 7964 69/01

REF

PART NUMBER

DESIGNATION

- 137 -

QTY

REF

PART NUMBER

DESIGNATION

QTY

REGULATING SYSTEM FOR SKID - FOR COMPRESSOR WITH FUELXPERT - OPTIONS

See Page 142 See Page 66 See Page 94 or 95

See Page 142 See Page 142 1611 7967 69_05

See Page 56 or 74

- 138 -

1611 7967 69/05

REGULATING SYSTEM FOR SKID - FOR COMPRESSOR WITH FUELXPERT - OPTIONS

REF

PART NUMBER

DESIGNATION

25 30 50 130 131 132 160 165 170 175 180 181 183 185 200 220 240 242 245 250 251 255 260 280 290 325 327 329 330 335 340 342 345 346 347 348 355 360 365 375 380 390

0147 1362 03 0301 2344 00 1089 9515 02 0575 0791 57 1613 0801 08 1619 5898 01 1079 5840 19 0653 1124 00 0653 1062 00 1615 9643 00 0653 1062 00 0823 0000 19 0653 1062 00 0571 0035 14 0603 4102 03 0560 4401 06 0603 4102 03 0653 1062 00 0581 0028 01 0575 0102 11 0395 1010 57 0653 1062 00 0581 1228 04 0653 1062 00 1615 9643 00 0581 0028 01 0653 1062 00 0564 0000 24 0653 1062 00 1615 9643 00 0603 4102 03 0605 8350 69 0560 4401 06 0653 1062 00 0823 0000 19 0653 1062 00 0581 1228 04 0575 0102 11 0395 1010 57 0581 1228 04 0653 1046 00 1604 5758 01

HEX. HEAD SCREW PLAIN WASHER SOLENOID VALVE HOSE ASSEMBLY PIPE CLAMP HEX. HEAD SCREW HEXAGON NIPPLE FLAT GASKET FLAT GASKET REDUCER FOR SCAVENGE PIPE FLAT GASKET NON-RETURN VALVE FLAT GASKET HEXAGON NIPPLE HEXAGON NIPPLE CROSS HEXAGON NIPPLE FLAT GASKET STRAIGHT PIPE COUPLING HOSE ASSEMBLY INSULATING HOSE FLAT GASKET PIPE COUPLING FLAT GASKET REDUCER FOR SCAVENGE PIPE STRAIGHT PIPE COUPLING FLAT GASKET TEE FLAT GASKET REDUCER FOR SCAVENGE PIPE HEXAGON NIPPLE BUSHING CROSS FLAT GASKET NON-RETURN VALVE FLAT GASKET PIPE COUPLING HOSE ASSEMBLY INSULATING HOSE PIPE COUPLING FLAT GASKET ADAPTER

1611 7967 69/05

QTY

REF

PART NUMBER

DESIGNATION

QTY

2 2 1 1 6 6 2 1 1 1 1 1 1 1 1 2 1 1 2 2 2 1 1 1 1 4 4 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1

395 396 397 400 410 420 425 430 435

0581 0000 67 0070 6002 10 0581 1200 30 1503 2566 02 0653 1124 00 1079 5840 35 0575 0403 55 1079 5840 02 0653 1124 00

STRAIGHT PIPE COUPLING PLASTIC TUBE ELBOW PIPE COUPLING TEE FLAT GASKET NIPPLE HOSE ASSEMBLY HEXAGON NIPPLE FLAT GASKET

1 AR 1 1 1 1 1 1 1

- 139 -

REF

PART NUMBER

DESIGNATION

QTY

PREHEATER - OPTIONS

See Page 92

See Page 52

REF

PART NUMBER DESIGNATION

QTY

1604 4690 05

KIT

•A20 •A25 •A30 •A35

1604 8314 00 1604 5281 01 1089 9585 01 1089 9585 81

BRACKET BRACKET TIME RELAY COVER

1 1 1 1

30 40 50 60 70 80 90 100 110 115 120 130 140 150 160 190 200 210 220 230 240 250 260 270 280 290 300 310 320

1619 2766 00 1626 2094 00 1604 9481 01 0147 1247 03 0301 2321 00 0266 2108 00 1613 0801 08 1619 5898 01 0147 1247 03 0333 3220 00 0266 2108 00 0070 6002 05 0653 1046 00 3176 6301 00 0571 0020 55 1626 2101 00 1604 7580 00 1089 9206 12 1089 9206 59 1604 3672 01 1089 0341 02 0129 3110 00 0348 0110 03 0348 0101 05 1626 0154 00 0147 1358 03 1604 2765 02 0147 1250 03 0301 2321 00

HEX. HEAD SCREW SUPPORT SUPPORT HEX. HEAD SCREW PLAIN WASHER HEXAGON NUT PIPE CLAMP HEX. HEAD SCREW HEX. HEAD SCREW LOCK WASHER HEXAGON NUT PLASTIC TUBE FLAT GASKET STRAIGHT NIPPLE HOSE NIPPLE WIRING RESISTOR CIRCUIT BREAKER PROTECTION CAP RELAY RELAY BLIND RIVET ANCHOR PLATE CABLE TIE BRACKET HEX. HEAD SCREW GUIDE HEX. HEAD SCREW PLAIN WASHER

2 1 1 2 2 1 7 3 4 4 4 AR 1 2 2 1 1 1 1 1 1 5 3 3 1 1 2 2 2

1611 7972 69_01

- 140 -

1611 7972 69/01

OIL PUMP - FOR COMPRESSOR WITH QUICK DRAIN CONNECTION - OPTIONS

1611 7980 69_01

1611 7980 69/01

- 141 -

REF

PART NUMBER DESIGNATION

QTY

20 30 40 50 60 70 75 80 150 160 170 180

1615 8393 00 1604 6133 00 0661 1033 00 0661 1038 00 0603 5522 03 0571 0020 20 0661 1033 00 0072 8403 16 1615 8745 01 0661 1038 00 0661 1038 00 0603 4243 02

1 1 1 1 1 1 1 AR 12 12 12 12

OILPUMP COUPLING SEALING WASHER SEALING WASHER HEXAGON NIPPLE HOSE NIPPLE SEALING WASHER HOSE QUICK COUPLING SEALING WASHER SEALING WASHER HEXAGON NIPPLE

REGULATING SYSTEM FOR CONTAINER - FOR COMPRESSOR WITH FUELXPERT - OPTIONS

See Page 94 or 95

See Page 138

1611 7985 69_00

- 142 -

1611 7985 69/00

REGULATING SYSTEM FOR CONTAINER - FOR COMPRESSOR WITH FUELXPERT - OPTIONS

REF

PART NUMBER

DESIGNATION

QTY

20 30 40 50 60

1626 2520 00 0575 0102 58 0575 0102 38 0575 0102 42 0575 0102 57

BRACKET HOSE ASSEMBLY HOSE ASSEMBLY HOSE ASSEMBLY FLEXIBLE

1 2 2 1 1

1611 7985 69/00

REF

PART NUMBER

DESIGNATION

- 143 -

QTY

REF

PART NUMBER

DESIGNATION

QTY

ADDITIONAL FUEL FILTER - OPTIONS

See Page 110

See Page 58

See Page 52

See Page 62

See Page 56 or 74

See Page 62

1611 7979 69_02

- 144 -

1611 7979 69/02

ADDITIONAL FUEL FILTER - OPTIONS

REF

PART NUMBER

DESIGNATION

QTY

REF

PART NUMBER

DESIGNATION

QTY

100 110 120 125 130 390 395 400 410 415 420 485 490 495 520 525 530 540 550 560 565 570 575 580 590 610 615 620 625 630 650 655

1626 1949 00 1619 2766 00 1089 0659 03 0147 1212 03 0301 2318 00 1604 2742 00 1615 5664 00 1626 2093 00 1626 2097 00 0147 1325 03 0301 2335 00 1079 5840 21 0653 1128 00 0571 0020 43 0570 0250 04 0570 0250 04 0075 4025 35 0571 0020 72 1604 1384 00 0075 4025 42 0347 6103 00 1079 5840 28 0653 1100 00 1604 2799 00 0347 6103 00 1604 2780 02 0147 1250 03 0347 6108 00 0072 8403 16 1604 4399 01 0075 4025 23 1626 0264 80

SUPPORT HEX. HEAD SCREW LEVEL SENSOR HEX. HEAD SCREW PLAIN WASHER FUEL COOLER HEX. HEAD SCREW RACOR BRACKET HEX. HEAD SCREW PLAIN WASHER BUSHING FLAT GASKET HOSE NIPPLE HOSE COUPLING HOSE COUPLING FUEL HOSE ELBOW HOSE NIPPLE FUEL HOSE HOSE CLAMP HEXAGON NIPPLE FLAT GASKET ELBOW HOSE CLAMP GASKET HEX. HEAD SCREW HOSE CLAMP HOSE MANIFOLD FUEL HOSE NIPPLE ASSY.

1 4 1 5 5 1 6 1 2 12 12 1 1 1 1 1 AR 1 1 AR 2 1 1 1 2 2 4 1 AR 1 AR 1

685 690

0333 3227 00 0266 2110 00

LOCK WASHER HEXAGON NUT

1 1

•A10 •A20 •A30 •A40

1626 0264 00 1626 0265 00 1626 0266 00 0517 1100 31

NIPPLE NIPPLE WASHER BEARING BALL

1 1 1 1

660 665 670

0347 6110 00 1626 0999 00 1626 0375 00

HOSE CLAMP SUPPORT FILTER

2 1 1

•B10

2914 9975 00

FILTER ELEMENT

675 680

1615 1789 00 0147 1322 03

BRACKET HEX. HEAD SCREW

1 1

1611 7979 69/02

- 145 -

REF

PART NUMBER

DESIGNATION

QTY

OIL SEPERATOR ASSEMBLY AND REGULATING VALVE - FOR COMPRESSOR WITH COLD WEATHER EQUIPMENTS FOR EC/ASME - OPTIONS

See Page 56 or 74

REF

PART NUMBER DESIGNATION

1604 2598 93

205 250 255 260 265 270 275 280 290 300

1604 4609 00 1089 0620 21 0653 1124 00 0580 0525 06 0580 0500 26 0653 1124 00 9090 0510 00 0653 1124 00 1604 3586 01 1626 1052 82

515 520

1079 9920 45 1079 9920 00

QTY

OILSEP. ASSY ASME (For details see page 99) INSULATION SOLENOID VALVE FLAT GASKET STRAIGHT PIPE-COUPLING STRAIGHT PIPE-COUPLING FLAT GASKET SILENCER FLAT GASKET WIRE HARNESS VALVE REGULATOR (For details see page 147) INFORMATION LABEL INFORMATION LABEL

1 1 1 1 1 1 1 1 1 1 1 1 1

1611 8771 67_21

- 146 -

1611 8771 67/21

REGULATING VALVE - OPTIONS

REF

1626 1052 82_02

1626 1052 82/02

- 147 -

PART NUMBER DESIGNATION

QTY

1626 1052 82

VALVE REGULATOR (From page 146)

•20 •30 •35 •40

1626 1051 00 2252 4057 00 0147 1249 03 -

•45

•50 •55

1604 7076 00 -

•60 •65

2252 4058 00 -

•70 •75 •80

2252 1428 00 2252 4059 00 -

•85 •95 •100 •105 •115 •120

1626 1052 00 1604 4289 00 0268 4138 22 0663 2135 00 1626 1053 00 0663 2105 61

1 1 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2

PARTS FROM SERVICE PAK

REF

•E •G •H

- 148 -

PART NUMBER DESIGNATION -

QTY

PARTS FROM SERVICE PAK(From page 20) SEALING WASHER FLAT GASKET SEALING WASHER

Printed in Belgium 04/2008 - 2955 1610 00