Gaspardo Monica-MTR Parts Manual G19531191 - PDF by www.heydownloads.com

MASCHIO GASPARDO S.p.A. *)

MONICA-MTR Cod:

G19531191

2013-02

IT EN

*) Valido per Paesi UE *) Valid for EU member countries *) Valable dans les Pays UE *) Gilt für EU-Mitgliedsländer *) Válido para Países UE

DE FR ES

PARTI DI RICAMBIO SPARE PARTS ERSATZTEILE PIECES DÉTACHÉES PIEZAS DE REPUESTO

ITALIANO

ENGLISH

DEUTSCH

FRANÇAIS

ESPAÑOL

PARTI DI RICAMBIO

SPARE PARTS

ERSATZTEILE

PIECES DÈTACHÈES

RESPUESTOS

Le ordinazioni delle parti di ricambio vanno fatte presso i nostri concessionari di zona e devono essere sempre corredate dalle seguenti indicazioni:

Orders must be transmitted through our area dealers and should always include the following indications:

Die Bestellungen müssen bei unseren Gebietshändrer aufgegeben werden. Bei der Bestellung sind stets die folgenden Angaben zu machen:

Les ordres doivent être effectués auprés de nos concessionaires de zone en précisant les indications suivantes:

Los pedidos han de efectuarse en nuestros consesionarios de zona y deben incluir siempre las siguientes indicaciones:

- Tipo, modello e numero di matricola dell’attrezzatura. Tali dati sono stampigliati nell’apposita targhetta di cui è dotata ogni attrezzatura.

- Type, model and serial number of the machine. These data are punched on the data plate with which every implement is equipped.

- Typ, Modell und Serien-Nummer des Geräts. Diese Daten stehen auf dem Typenschild, mit dem jedes Gerät versehen ist.

- Type, modéle et numéro de série de la machine. Ces données sont gravées sur la plaque d’identification de chaque outil.

- Tipo, modelo y número de matrícula del equipo. Dichos datos están impresos en la relativa placa presente en el equipo.

- Numero di codice della parte richiesta rilevabile dal catalogo ricambi.

- Code number of the required spare part. This will be found in the spare parts catalogue.

- Artikel Nr. der erforderlichen Ersatzteile. Diese stehen im Ersatzteil-Katalog.

- Numéro de code de la piéce détachée indiqué sur le catalogue des piéces détachées.

- Número de código de la parte requerida presente en el catálogo respuestos.

- Descrizione del particolare e quantità richiesta.

- Description of the part and required quantity.

- Beschreibung des Ersatzteils und die erforderliche Stückzahl.

- Description de la piéce et quantité requise.

- Descripcíon de la pieza y cantidad requerida.

Numero della tavola.

Table number.

Tafelnummer.

Numéro de plan.

Numero de illustración.

- Mezzo di trasporto. Nel caso questa voce non sia specificata, la Ditta Costruttrice, pur dedicando a questo servizio una particolare cura, non risponde di eventuali ritardi di spedizione dovuti a cause di forza maggiore. Le spese di trasporto si intendono sempre a carico del destinatario. La merce viaggia a rischio e pericolo del committente anche se venduta franco destino.

- Means of dispatch. If this item is not indicated, the Manufacturer, while dedicating particular care to this service, shall not be held responsible for delays in delivery caused by cases of force majeure. Transport expenses shall always be at the consignee’s charge. The goods travel at the purchaser’s risk and peril even when sold ex destination.

- Versandmittel. Wenn dieser Punkt nicht spezifiziert wird, haftet die Herstellerfirma nicht für etwaigen Lieferverzug aufgrund höherer Gewalt, auch wenn er diesen Service besonders aufmerksam abwickelt. Die Frachtkosten gehen dagegen immer zu Lasten des Empfängers. Die Ware reist auf Gefahr und Risiko des Auftraggebers, auch wenn frei Haus Verkauft vereinbart worden ist.

- Moyen d’expédition. Si cette rubrique n’est pas indiquée, le Constructeur, bien que soucieux de ce service, ne répond pas des retards d’expédition pour des causes de force majeure. Les frais de transport sont toujours à la charge du destinataire. La marchandise voyage aux risques et périls de l’acheteur même si vendue franco de port.

- Medio de transporte. En caso que este ítem no esté especificado, el Fabricante, aún prestando la debidas consideraciones para este aspecto, no responde por eventuales retardos de env’o debidos a causas de fuerza mayor. Los gastos de transporte se consideran siempre a cargo del destinatario. La mercandería viaja bajo riesgo y peligro del comprador, incluso cuando se vende franco destino.

NOTA: Il termine (Dx) Destro o (Sx) Sinistro della macchina o di parti di essa, è inteso guardando la macchina dalla parte posteriore. Le eccezioni saranno indicate.

NOTE: The symbols (Dx) right and (Sx) left, concerning the machine or single parts of it, are referred, as in the figure, to a rear view of them. Exceptions will be indicated.

N.B.: Die Merkzeichen (Dx) rechts und (Sx) links betreffen eine rückwärtige Aussicht der Maschine oder Teile von ihr (siehe Bild). Ausnahmen werden gezeigt.

N.B.: Les références (Dx) droit et (Sx) gauche de la machine ou des parties de la même, est entendue, comme de la figure, en regardant la machine de derriere dans le sens de marche.

N.B.: La refencia (Dx) derecha o (Sx) izquierda de la máquina o de sus componentes, se entiende, como en la figura, mirando la máquina por la parte trasera. Se indicarán las excepciones.

N° Tavola

Descrizione

Pagina

TAV. 012 TAV. 300 TAV. 020 TAV. 031 TAV. 040 TAV. 051 TAV. 060 TAV. 072 TAV. 080 TAV. 092 TAV. 101 TAV. 112 TAV. 121 TAV. 130 TAV. 151 TAV. 160 TAV. 171 TAV. 290 TAV. 182 TAV. 191 TAV. 201 TAV. 211 TAV. 220 TAV. 230 TAV. 240 TAV. 251 TAV. 261 TAV. 271 TAV. 281

Telaio «Monica 6 file» .......................................................................... 4 Telaio «Monica 7 file» .......................................................................... 6 Impianto oleodinamico telaio ............................................................... 8 Segnafile ............................................................................................. 10 Impianto oleodinamico segnafile ........................................................ 12 Depressore ......................................................................................... 14 Scatola di rinvio elemento ................................................................... 16 Distributore semi ................................................................................. 18 Dischi di semina ................................................................................. 20 Telaio elemeto ..................................................................................... 22 Ruote di profondità .............................................................................. 26 Ruote di compressione ....................................................................... 28 Coprisemi anteriori per ruote a “V” ....................................................... 30 Ruotino premiseme inox ..................................................................... 32 Esclusione elettrica file di semina ....................................................... 34 Cambio ............................................................................................... 36 Trasmissione elementi seminatori «Monica 6 file» ............................... 38 Varianti trasmissione elementi seminatori «Monica 7 file» ................... 40 Ruote di trasmissione ......................................................................... 42 Supporti serbatoio spandiconcime unico ............................................. 44 Serbatoio spandiconcime unico .......................................................... 46 Speedy set ......................................................................................... 48 Elementi di concimazione ................................................................... 50 Concimazione pneumatica .................................................................. 52 Varianti concimazione file esterne ....................................................... 54 Microgranulatore ................................................................................. 56 Trasmissione spandiconcime e microgranulatore ................................ 60 Accessori ........................................................................................... 62 Cardani ............................................................................................... 64

TAV. 012

17 31

16 20

23 47

25 16 22

A NIC O M

10 24

18 33 30 43

44 - Sp. 9.5** 57

(*)

7 48

45 - Sp. 11**

2 (*)

Sp. 9** - 46

27 39

59 35 6

56 13

37 11

20 62

36 3 28

(*)

41 - Sp. 0,5 42 - Sp. 0,2

(**)

Sp. (mm)

66 63

65 64

cod. G19531191

TELAIO «MONICA 6 FILE» Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67

F01020114 F01020160 F01020253 F01020522 F01100011 F01200293 F01230059 F01230085 F01410076 F01020233 F02200162 F01020476 F02200342 F01200270 F01200306 F02200507 F20100133 F05150486 F20100136 G13812311 G14217560 G15110091 G17114390 G20970142 G20970120 G17110340 G17110351 G17112600 G17113321 G17114181 G17114340 G17114350 G17114500 G17114560 G17114580 G17114600 G17114921 G17114941 G17130020 G18700450 G18701770 G18701940 G20980017 G19003560 G19003570 G19003590 G17114201 G17114211 G17114221 G17114231 F01020483 G19205520 G19205510 G17113270 G17113400 G17112720 G17112771 G17112761 G19003471 G17114720 G17114740 F02200584 F02200246 G10710032 F01020485 F01020510 G89900511

TAV. 012

Descrizione

Description

Benennung

Descripcion

VITE M10X1,5X50 U5737 8.8 ZN VITE M12X1,75X60 U5737 8.8 ZN VITE M16X2X50 U5737 8.8 BR VITE M12X1,75X80 U5739 8.8 ZN ING.M 6X1 7663-A 9SMNPB28 ZN DADO M12X1,75 U5588 6.8 ZN DADO M12X1,75 D982 8 ZN DADO M16X 2 D982 8 ZN ROS.M12 13X 24X2,5 U6592 ZN VITE M14X2X200 U5737 8.8 BR COPIGLIA 3X 20 U1336 ZN VITE M10X1,5X30 U5739 8.8 ZN COPIGLIA R 2X 50 ZN DADO M10X 1,5 U5588 6.8 ZN DADO M14X 2 U5588 6.8 ZN SPINA A SCATTO D 9 B/83 PERNO D25 L122 C43 ZN SOFFIETTO D.29XD.67 L83 >PERNO D28 L109 C43 ZN CATENELLA CON MOSCHETTONE ZN SUPPORTO 5 TUBI SCONTRO A U SP.8 2F15 165 TERZO PUNTO MONICA RONDELLA 32X4X15,5 RONDELLA 70X8X28,5 PERNO INTERFILA ZN FERMO CENTRALE DISTANZIALE GUIDA SPESSORE GUIDA TELAIO CENTRALE 6-7F PIATTO INTERF.INT.6-7F PIATTO INTERF.EST.6-7F PIASTRA DI GUIDA L310 SP5 7F PIASTRA DI GUIDA L1020 SP5 6F PIASTRA DI GUIDA L425 SP5 6F REGOLAZIONE FERMO ELEMENTO 30 MM FERMO ELEMENTO 95 MM SCONTRO 80X 30-12 RONDELLA 17 X45 X6 ZN RONDELLA 50 X90 X0,5 RONDELLA 50 X90 X0,2 BOCCOLA 13X12,25X18 PIASTRA SCORR.D.110X3,5 SP.9,5 PIASTRA SCORR.D.90X5,0 SP.11,0 PIASTRA SCORR.D.90X3,0 SP.9,0 SECONDO TUBO TELES.DX 6-7F SECONDO TUBO TELES.SX 6-7F TERZO TUBO TELES.DX 6-7F TERZO TUBO TELES.SX 6-7F VITE M10X1,5X40 U5739 10.9 ZD FERMO LUNGO PIATTO INTERFILA FERMO PIATTO INTERFILA PIATTO INTERFILA PIATTO INTERFILA CENTRALE ASS.PIASTRA INTERNA PIASTRA EST.DX PIASTRA EST.SX PATTINO DI SCORRIMENTO SUPPORTO PUNTELLO DX SUPPORTO PUNTELLO SX SPINA SICUR. D. 12X70 ZN COPIGLIA 6X 45 U1336 ZN PUNTELLO VITE M10X1,5 X 50 5739 8.8 ZN VITE M12X1,75X30 U5739 8.8 ZN KIT DECALCOMANIE SP-MT

BOLT M10X 1,5X50 U5737 8.8 ZN BOLT M12X1,75X60 U5737 8.8 ZN BOLT M16X2X50 BOLT M12X1,75X80 U5739 8.8 ZN GREASE NIPPLE M6X1 7663-A ZN NUT M12X1,75 U5588 6.8 ZN NUT M12X1,75 D982 8 ZN NUT M16X 2 D982 8 ZN GROWER 12 13X 24X2,5 U659 ZN BOLT M14X 2X200 U5737 8.8 ZB SPLIT PIN 3 X20 1336 GALVAN. TORN. M10X1,5 X 30 5739 8.8 ZN SPRING SPLIT PIN 2X50 ZN NUT M10X 1,5 U5588 6.8 ZN NUT M14X2 SNAP PIN D9 B/83 ZN PIN D25 L122 C43 ZN AIR BLOW D.29X.67 L83 BOLT D28 L109 C43 ZN CHAIN WITH SPRING CATCH 5 PIPE SUPPORT STRIKER THIRD POINT MONICA WASHER 32X4X15-5 WASHER 70X8X28-5 INTERROW PIN ZN CENTRAL LOCK GUIDE SPACER GUIDE SPACER CENTRAL FRAME 6-7R INTERNAL INTERROW PLATE 6-7R ESTERNAL INTERROW PLATE 6-7R GUIDE PLATE L310 GUIDE PLATE L1020 GUIDE PLATE L425 ADJUSTMENT ELEMENT LOCK 30 MM ELEMENT LOCK 95 MM PLATE 80X30 SP.12 WASHER 17X45X6 GALV.ED WASHER 50 X90 X0,5 WASHER 50 X90 X0,2 BUSHING 13X20X18 SLIDING PLATE SP9,5 SLIDING PLATE SP.11 SLIDING PLATE SP.9 2ND TELESCOPIC TUBE RIGHT 6-7R 2ND TELESCOPIC TUBE LEFT 6-7R 3RD TELESCOPIC TUBE RIGHT 6-7R 3RD TELESCOPIC TUBE LEFT 6-7R SCREW M10X1,5X40 U5739 10.9 ZD

VIS M10X 1,5X50 U5737 8.8 ZN VIS M12X1,75X60 U5737 8.8 ZN VIS M16X2X50

SCHRA.M10X 1,5X50 U5737 8.8 ZN SCHRA.M12X1,75X60 U5737 8.8 ZN SCHRAUBE M16X2X50

TORN. M10X 1,5X50 U5737 8.8 ZN TORN. M12X1,75X60 U5737 8.8 ZN TORNILLO M16X2X50

GRAISS. A BILLE M6X1 7663A ZN ECROU M12X1,75 U5588 6.8 ZN ECROU M12X1,75 D982 8 ZN ECROU M16X 2 D982 8 ZN

SCHMIERBUECHE M6X1 7663-A ZN MUTTER M12X1,75 U5588 6.8 ZN MUTTER M12X1,75 D982 8 ZN MUTTER M16X 2 D982 8 ZN

ENGRAS. DE ESFERAS M6X1 7663-A TUERCA M12X1,75 U5588 6.8 ZN TUERCA M12X1,75 D982 8 ZN TUERCA M16X 2 D982 8 ZN

VIS M14X2X 200 U5737 8.8 ZB GOUPILLE 3 X20 1336 ZN

SCHRAUBE M14X 2X200 U5737 8.8 SPLINT 3 X20 1336 ZN

TORNILLO M14X2X200 5737 8.8 ZB PASADOR 3 X20 1336 ZN

GOUPILLE R 2X50 ZN ECROU M10X 1,5 U5588 6.8 ZN ECROU M14X2 FICHE A DETENTE D9 B/83 ZN BOULON D25 L122 C43 ZN

SPLINT R 2X50 ZN MUTTER M10X 1,5 U5588 6.8 ZN MUTTER M14X2 EINRASTSTIFT D9 B/83 ZN BOLZEN D25 L122 C43 ZN

CHAVETA R 2X50 ZN TUERCA M10X 1,5 U5588 6.8 ZN DADO M14X2 CLAVIJA DE MUELLE D9 B/83 ZN PERNO D25 L122 C43 ZN

BOULON D28 L109 C43 ZN CHAINETTE AVEC MOUSQUETON SUPPORT 5 TUBES BRIDE 150 MM

BOLTZEN D28 L109 C43 ZN KETTE MIT KARABINERHAKEN 5 ROHR HALTERUNG ANSCHLAG

PERNO D28 L109 C43 ZN CADENA CON GANCHO SOPORTE 5 TUBOS ELEMENTO DE EMPALME

RONDELLE 32X4X15-5 RONDELLE 70X8X28-5 PIVOT +CARTEMENT ZN

UNTERLEGSCHEIBE 32X4X15-5 UNTERLEGSCHEIBE 70X8X28-5 REIHENABSTANDSBOLZEN ZN

ARANDELA 32X4X15-5 ARANDELA 70X8X28-5 PERNO ENTREHILERAS ZN

RONDELLE 50 X90 X0,5 RONDELLE 50 X90 X0,2 BOITE 13X12-25X18 PLAQUE GLISSEMENT SP.9,5 PLAQUE GLISSEMENT SP.11 PLAQUE GLISSEMENT SP.9

UNTERLEGSCHEIBE 50 X90 X0,5 UNTERLEGSCHEIBE 50 X90 X0,2 BsCHSE 13X12-25X18 GLEITPLATTE SP9,5 GLEITPLATTE SP.11 GLEITPLATTE SP.9

ARANDELA 50 X90 X0,5 ARANDELA 50 X90 X0,2 CASQUILLO 13X12-25X18 PLACA DE DESPLAZAMIENTO SP9,5 PLACA DE DESPLAZAMIENTO SP.11 PLACA DE DESPLAZAMIENTO SP.9

VIS M10X1,5X40 U5739 10.9 ZD

SCHRA.M10X1,5X40 U5739 10.9 ZD

TORN. M10X1,5X40 U5739 10.9 ZD

FICHE D12 L70 ZN GOUPILLE 6 X45 U1336 ZN ETRESILLON VIS M 10X50 VIS M 12X30 KIT DECALCOMANIE SP

STIFT D12 L70 ZN SPLINT 6 X45 U1336 ZN STsTZE SCHRAUBE M 10X50 SCHRAUBE M 12X30 KIT ABZIEHB. SP

CLAVIJA D12 L70 ZN CLAVIJA 6 X45 U1336 ZN PUNTAL TORNILLO M 10X50 TORNILLO M 12X30 SET CALCOMANAS SP

cod. G19531191

INTERROW PLATE CENTRAL INTERROW PLATE INTERNAL PLATE ASS.BLY EXTERNAL RIGHT PLATE EXTERNAL LEFT PLATE SLIDING SIDE BLOCK RH PROP SUPPORT LH PROP SUPPORT PIN D12 L70 ZN PIN 6 X45 U1336 ZN PROP BOLT M10X1,5 X 50 5739 8.8 ZN BOLT M 12X30 DECAL KIT SP

TAV. 300

16 20

23 16

25 22

21 10

A NIC O M

18 33 30 43

44 - Sp. 9.5** 57

(*)

7 48

45 - Sp. 11**

2 (*)

Sp. 9** - 46

52 67 9 68

13 50

71 39

33 37

29 58

(*)

41 - Sp. 0,5 42 - Sp. 0,2

(**)

Sp. (mm)

40 3 28

61 54

4 36

67 11

62 65 64

cod. G19531191

TELAIO «MONICA 7 FILE» Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72

F01020479 F01020160 F01020253 F01020522 F01100011 F01200293 F01230059 F01230085 F01410076 F01020233 F02200162 F01020476 F02200342 F01200270 F01200306 F02200507 F20100133 F05150486 F20100136 G13812311 G14217560 G15110091 G17114390 G20970142 G20970120 G17110340 F01220033 G17112600 G17113321 G17114181 G17114340 G17114350 G17114500 G17114480 G17114610 G17114600 G17114921 G17114931 G17130820 G18700450 G18701770 G18701940 G20980017 G19003560 G19003570 G19003590 G17114201 G17114211 G17114221 G17114231 F01020483 G19205520 G19205510 G17113270 G17112320 G17112720 G17112771 G17112761 G19003471 G17114720 G17114740 F02200584 F02200246 G10710032 F01020485 F01020510 F01020528 F01030084 F01220048 G17111730 G18801340 G89900511

TAV. 300

Descrizione

Description

Benennung

Descripcion

VITE M10X1,5X35 U5739 8.8 ZN VITE M12X1,75X60 U5737 8.8 ZN VITE M16X2X50 U5737 8.8 BR VITE M12X1,75X80 U5739 8.8 ZN ING.M 6X1 7663-A 9SMNPB28 ZN DADO M12X1,75 U5588 6.8 ZN DADO M12X1,75 D982 8 ZN DADO M16X 2 D982 8 ZN ROS.M12 13X 24X2,5 U6592 ZN VITE M14X2X200 U5737 8.8 BR COPIGLIA 3X 20 U1336 ZN VITE M10X1,5X30 U5739 8.8 ZN COPIGLIA R 2X 50 ZN DADO M10X 1,5 U5588 6.8 ZN DADO M14X 2 U5588 6.8 ZN SPINA A SCATTO D 9 B/83 PERNO D25 L122 C43 ZN SOFFIETTO D.29XD.67 L83 >PERNO D28 L109 C43 ZN CATENELLA CON MOSCHETTONE ZN SUPPORTO 5 TUBI SCONTRO A U SP.8 2F15 165 TERZO PUNTO MONICA RONDELLA 32X4X15,5 RONDELLA 70X8X28,5 PERNO INTERFILA ZN DADO M10X 1,5 D980 8 ZN DISTANZIALE GUIDA SPESSORE GUIDA TELAIO CENTRALE 6-7F PIATTO INTERF.INT.6-7F PIATTO INTERF.EST.6-7F PIASTRA DI GUIDA L310 SP5 7F PIASTRA DI GUIDA L1220 SP5 7F RINFORZO GUIDA CENTRALE REGOLAZIONE FERMO ELEMENTO 30 MM FERMO ELEMENTO 13 MM SCONTRO 80X 30-12 3M10 25 RONDELLA 17 X45 X6 ZN RONDELLA 50 X90 X0,5 RONDELLA 50 X90 X0,2 BOCCOLA 13X12,25X18 PIASTRA SCORR.D.110X3,5 SP.9,5 PIASTRA SCORR.D.90X5,0 SP.11,0 PIASTRA SCORR.D.90X3,0 SP.9,0 SECONDO TUBO TELES.DX 6-7F SECONDO TUBO TELES.SX 6-7F TERZO TUBO TELES.DX 6-7F TERZO TUBO TELES.SX 6-7F VITE M10X1,5X40 U5739 10.9 ZD FERMO LUNGO PIATTO INTERFILA FERMO PIATTO INTERFILA PIATTO INTERFILA PIATTO INTERFILA 1110 ASS.PIASTRA INTERNA PIASTRA EST.DX PIASTRA EST.SX PATTINO DI SCORRIMENTO SUPPORTO PUNTELLO DX SUPPORTO PUNTELLO SX SPINA SICUR. D. 12X70 ZN COPIGLIA 6X 45 U1336 ZN PUNTELLO VITE M10X1,5 X 50 5739 8.8 ZN VITE M12X1,75X30 U5739 8.8 ZN VITE M12X1,75X40 U5739 10.9 ZD VITE M10X1,5X25 U5933 10.9 ZD DADO M12X1,75 D980 8 ZN FERMO INTERF.2 POSIZIONI BOCCOLA 12,25X16 X14 KIT DECALCOMANIE SP-MT

BOLT M10X1,5X35 U5739 8.8 ZN BOLT M12X1,75X60 U5737 8.8 ZN BOLT M16X2X50 BOLT M12X1,75X80 U5739 8.8 ZN GREASE NIPPLE M6X1 7663-A ZN NUT M12X1,75 U5588 6.8 ZN NUT M12X1,75 D982 8 ZN NUT M16X 2 D982 8 ZN GROWER 12 13X 24X2,5 U659 ZN BOLT M14X 2X200 U5737 8.8 ZB SPLIT PIN 3 X20 1336 GALVAN. TORN. M10X1,5 X 30 5739 8.8 ZN SPRING SPLIT PIN 2X50 ZN NUT M10X 1,5 U5588 6.8 ZN NUT M14X2 SNAP PIN D9 B/83 ZN PIN D25 L122 C43 ZN AIR BLOW D.29X.67 L83 BOLT D28 L109 C43 ZN CHAIN WITH SPRING CATCH 5 PIPE SUPPORT STRIKER THIRD POINT MONICA WASHER 32X4X15-5 WASHER 70X8X28-5 INTERROW PIN ZN NUT M10X 1,5 D980 8 ZN GUIDE SPACER GUIDE SPACER CENTRAL FRAME 6-7R INTERNAL INTERROW PLATE 6-7R ESTERNAL INTERROW PLATE 6-7R GUIDE PLATE L310 GUIDE PLATE L1220 CENTRAL GUIDE REINF. ADJUSTMENT ELEMENT LOCK 30 MM ELEMENT LOCK 13 MM PLATE 80 X30 -12 3M10 25 WASHER 17X45X6 GALV.ED WASHER 50 X90 X0,5 WASHER 50 X90 X0,2 BUSHING 13X20X18 SLIDING PLATE SP9,5 SLIDING PLATE SP.11 SLIDING PLATE SP.9 2ND TELESCOPIC TUBE RIGHT 6-7R 2ND TELESCOPIC TUBE LEFT 6-7R 3RD TELESCOPIC TUBE RIGHT 6-7R 3RD TELESCOPIC TUBE LEFT 6-7R SCREW M10X1,5X40 U5739 10.9 ZD

VIS M10X1,5X35 U5739 8.8 ZN VIS M12X1,75X60 U5737 8.8 ZN VIS M16X2X50

SCHR. M10X1,5X35 U5739 8.8 ZN SCHRA.M12X1,75X60 U5737 8.8 ZN SCHRAUBE M16X2X50

TORN. M10X1,5X35 U5739 8.8 ZN TORN. M12X1,75X60 U5737 8.8 ZN TORNILLO M16X2X50

GRAISS. A BILLE M6X1 7663A ZN ECROU M12X1,75 U5588 6.8 ZN ECROU M12X1,75 D982 8 ZN ECROU M16X 2 D982 8 ZN

SCHMIERBUECHE M6X1 7663-A ZN MUTTER M12X1,75 U5588 6.8 ZN MUTTER M12X1,75 D982 8 ZN MUTTER M16X 2 D982 8 ZN

ENGRAS. DE ESFERAS M6X1 7663-A TUERCA M12X1,75 U5588 6.8 ZN TUERCA M12X1,75 D982 8 ZN TUERCA M16X 2 D982 8 ZN

VIS M14X2X 200 U5737 8.8 ZB GOUPILLE 3 X20 1336 ZN

SCHRAUBE M14X 2X200 U5737 8.8 SPLINT 3 X20 1336 ZN

TORNILLO M14X2X200 5737 8.8 ZB PASADOR 3 X20 1336 ZN

GOUPILLE R 2X50 ZN ECROU M10X 1,5 U5588 6.8 ZN ECROU M14X2 FICHE A DETENTE D9 B/83 ZN BOULON D25 L122 C43 ZN

SPLINT R 2X50 ZN MUTTER M10X 1,5 U5588 6.8 ZN MUTTER M14X2 EINRASTSTIFT D9 B/83 ZN BOLZEN D25 L122 C43 ZN

CHAVETA R 2X50 ZN TUERCA M10X 1,5 U5588 6.8 ZN DADO M14X2 CLAVIJA DE MUELLE D9 B/83 ZN PERNO D25 L122 C43 ZN

BOULON D28 L109 C43 ZN CHAINETTE AVEC MOUSQUETON SUPPORT 5 TUBES BRIDE 150 MM

BOLTZEN D28 L109 C43 ZN KETTE MIT KARABINERHAKEN 5 ROHR HALTERUNG ANSCHLAG

PERNO D28 L109 C43 ZN CADENA CON GANCHO SOPORTE 5 TUBOS ELEMENTO DE EMPALME

RONDELLE 32X4X15-5 RONDELLE 70X8X28-5 PIVOT +CARTEMENT ZN ECROU M10X 1,5 D980 8 ZN

UNTERLEGSCHEIBE 32X4X15-5 UNTERLEGSCHEIBE 70X8X28-5 REIHENABSTANDSBOLZEN ZN MUTTER M10X 1,5 D980 8 ZN

ARANDELA 32X4X15-5 ARANDELA 70X8X28-5 PERNO ENTREHILERAS ZN TUERCA M10X 1,5 D980 8 ZN

RONDELLE 50 X90 X0,5 RONDELLE 50 X90 X0,2 BOITE 13X12-25X18 PLAQUE GLISSEMENT SP.9,5 PLAQUE GLISSEMENT SP.11 PLAQUE GLISSEMENT SP.9

UNTERLEGSCHEIBE 50 X90 X0,5 UNTERLEGSCHEIBE 50 X90 X0,2 BsCHSE 13X12-25X18 GLEITPLATTE SP9,5 GLEITPLATTE SP.11 GLEITPLATTE SP.9

ARANDELA 50 X90 X0,5 ARANDELA 50 X90 X0,2 CASQUILLO 13X12-25X18 PLACA DE DESPLAZAMIENTO SP9,5 PLACA DE DESPLAZAMIENTO SP.11 PLACA DE DESPLAZAMIENTO SP.9

VIS M10X1,5X40 U5739 10.9 ZD

SCHRA.M10X1,5X40 U5739 10.9 ZD

TORN. M10X1,5X40 U5739 10.9 ZD

INTERROW PLATE INTERROW PLATE 1110 INTERNAL PLATE ASS.BLY EXTERNAL RIGHT PLATE EXTERNAL LEFT PLATE SLIDING SIDE BLOCK RH PROP SUPPORT LH PROP SUPPORT PIN D12 L70 ZN PIN 6 X45 U1336 ZN PROP BOLT M10X1,5 X 50 5739 8.8 ZN BOLT M 12X30 BOLT M12X1,75X40 U5739 10.9ZN BOLT 10 X25 5933 10.9 GALVANIZ NUT M12X1,75 D980 8 ZN

FICHE D12 L70 ZN GOUPILLE 6 X45 U1336 ZN ETRESILLON VIS M 10X50 VIS M 12X30 VIS M12X1,75X40 U5739 10.9 ZN VIS 10 X25 5933 10.9 ZN ECROU M12X1,75 D980 8 ZN

STIFT D12 L70 ZN SPLINT 6 X45 U1336 ZN STsTZE SCHRAUBE M 10X50 SCHRAUBE M 12X30 SCHR.M12X1,75X40 U5739 10.9 ZN SCHRAUBE 10 X25 5933 10.9 ZN SCHEIBE M12X1,75 D980 8 ZN

CLAVIJA D12 L70 ZN CLAVIJA 6 X45 U1336 ZN PUNTAL TORNILLO M 10X50 TORNILLO M 12X30 TORN.M12X1,75X40 U5739 10.9 ZN TORNILLO 10 X25 5933 10.9 ZN TUERCA M12X1,75 D980 8 ZN

BUSHING 12,25X16 X14 DECAL KIT SP

BOITE 12,25X16 X14 KIT DECALCOMANIE SP

B_CHSE 12,25X16 X14 KIT ABZIEHB. SP

CASQUILLO 12,25X16 X14 SET CALCOMANAS SP

cod. G19531191

TAV. 020

19 17

8 2 15 18

20 16

11 13

15 18 16

18 18 5

21 1 4

3 20

cod. G19531191

IMPIANTO OLEODINAMICO TELAIO Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

G15110991 G22500025 G22500018 G22500019 G15112630 G15113000 G22500024 G22500022 G13811211 F03150211 F03150935 F03151237 F05150325 G22270463 F03150266 F03151194 F03151216 F01500012 F05010359 F02200229 F03100181 G67004010

TAV. 020

Descrizione

Description

Benennung

Descripcion

ASSE LATERALE PISTONI ZN PERNO CENTRALE CILINDRI BOCCOLA PERNO EST.CILINDRO BOCCOLA FERMO PERNO EST.CIL. CILINDRO SUPPORTO TUBI IDRAULICI TUBO 1/4 R2 C-F MT.0,60 TUBO 1/4 R2 C-C MT.1,00 TUBO X COLLEG. AL TRATTORE NIPPLO MM CIL-CIL 1/2-1/4 ZN INNESTO RAP.MASCH.1/2 A VALV. ROS. 21 X27X1,5 RAME -1/2" CAPPUC.F X INN.M RAP.1/2 ROSSO TUB.TR.1/4R2 F-F 1/4 L1500 LM NIPPLO MM CIL-CIL 1/4-1/4 ZN PROLUNGA CORTA 036 1/4 RACCORDO -T- CENTR.M-FG-M 1/4 RONDELLA IN RAME 1/4" PASSAPARETE 1/4M-1/4M COPIGLIA 5X 45 U1336 ZN KIT GUARNIZ.CILINDRO 15112630 SUPP.CON ROTULA CAT.1 D.22,1

SIDE SPINDLE PISTONS ZN PIN- CYLINDER CENTRAL BUSHING CYLIND. OUTER PIN CYLIND. OUTER PIN STOP BUSHING CYLINDER 30X50 -875 PIPE SUPPORT PIPE 1/4 R1 C-F MT.0-60 PIPE 1/4 R1 C-C MT.1-00 PIPE FOR CONNECTION TO TRACTOR NIPLE MM CIL-CIL 1/4-1/2 ZN QUICK CONNECT MALE CONE 1/2 COPPER WASHER 21X27X1,5 1/2 COVER CONNECT F 1/2 RED TUBE TR.1/4R2 F-F1/4 L1500 LM NIPPLE GALV.CYL.MALE 1/4 ZN SHORT EXTENSION 036 1/4 UNION T M-M-F 1/4' ZN COPPER WASHER 13X19X1,5-1/4" PASS WALL 1/4M -1/4M SPLIT PIN 5X 45 U1336 ZN KIT O-RING CYLINDER 15112630 SUPP. WITH JOINT CHAIN 1 D.22.

AXEL LATERAL PISTON ZN PIVOT CENTR. CYLINDRES BOITE PIVOT EXT. CYLINDRE BOITE ARRET PIVOT EXT. CYL. CYLINDRE 30X50 -875 SUPPORT TUBES TUBE 1/4 R1 C-F M. 0-60 TUBE 1/4 R1 C-C M. 1-00 TUBE POUR CONN. AU TRACTEUR NIPLE MM 1/4-1/2 ZN CONNEXION RAPIDE MALE CONE 1/2 RONDELLE CUIVRE 21X27X1,5 1/2 COUVERCLE CONNEXION F 1/2 ROSE TUB.TR.1/4R2 F-F 1/4 L1500 LM NIPPLE MALE CYL. 1/4 ZN RALLONGE COURTE 036 1/4 RACCORD T M-M-F ª' ZN RONDELLE

SEITENACHSE KOLBEN ZN MITTELZAPFEN ZYLINDER BsCHSE AUSSENBOLZEN ZYLINDER ANSCHLAGBsCHSE AUSSENBOLZ. ZYL ZYLINDER 30X50 -875 ROHRHALTERUNG ROHR 1/4 R1 C-F M 0-60 ROHR 1/4 R1 C-C M 1-00 ROHR F. KUPPLUNG AM SCHLEPPER NIPLE GG 1/4-1/2 ZN SCHNELLKUPP.GEWINDE KONISC 1/2 SCHEIBE KUPFER 21X27X1,5 1/2 DECKEL W 1/2 SCHNELLKUPP. ROT ROHR1/4R2 F-F 1/4 L1500 LM NIPPELZYL.1/4 ZN KURZE VERLZNGERUNG 036 1/4 ANSCHLUSSTsCK TM-M-F 1/4' ZN SCHEIBE

EJE LATERAL PISTONES ZN PERNO CENTRAL CILINDROS CASQUILLO ESPIGA EXT. CILINDRO CASQUILLO BLOQUEO ESPIGA EXT.C CILINDRO 30X50 -875 SOPORTE TUBOS TUBO 1/4 R1 C-F MT.0-60 TUBO 1/4 R1 C-C MT.1-00 TUBO P/CONEXIN AL TRACTOR T NIPLE MM 1/4-1/2 ZN ACOPLAMIENT.RAP.MACHO CONO 1/2 ARANDELA COBRE 21X27X1,5 1/2 PAC PROTECCION F 1/2 ROJO TUB.TR.1/4R2 F-F 1/4 L1500 LM NIPLE MACHO CIL.1/4 ZN PROLONG. CORTA 036 1/4 UNIN T M-M-F 1/4' ZN R ARANDELA

GOUPILLE 5X 45 U1336 ZN KIT GARNIT. CYLINDRE 15112630 SUPP.AVEC ROTULE CAT.1 D.22,1

SPANNSTIFT 5X 45 U1336 ZN KIT DICHT.OR ZYLINDER15112630 HALTERUNG MIT GELENK KETTE 1

PASADOR 5X 45 U1336 ZN SET JUNTA OR CILINDRO15112630 SOP. CON RËTULA CAD.1 D.22,1

cod. G19531191

TAV. 031 23 33 25

24 26

12 39

43 43

34 32

23 33

28 27 35 29 31

24 32

28 27 35 29 31

1 18

3 5

24 36

6 2

20 19 21 19

8 10

11 12 13 14

8 9

cod. G19531191

SEGNAFILE Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44

G15212750 F01230048 G13812311 F02200507 G15212671 F05150460 G14217360 F02200194 G15413020 G20970111 G65337004 F01200270 G15212790 F01020479 G15413010 G20970128 G15212701 G15212760 G20970142 F01020233 F01200306 G15112921 F01060040 F01200244 F01230098 F01420048 F02050370 F03010576 F04010156 G15111311 G16610160 G16610170 G16610190 G16610210 G18801270 G16610430 F01020254 G17111481 F01410064 G17111490 G17111290 F20110865 G19204230 F02100312

TAV. 031

Descrizione

Description

BRACCIO SEGNAFILE SX DADO M10X 1,5 D982 8 ZN CATENELLA CON MOSCHETTONE ZN SPINA A SCATTO D 9 B/83 SUPPORTO SEGNAFILE SX PARACOLPI CIL.D50X21 M10X26,5 MONT.CILINDRO SI-ST COPIGLIA 4X 25 U1336 ZN SPINA 15X120 ZN RONDELLA 29,8X2X16,5 MOLLA TRAZ.SOLLEV. FU DADO M10X 1,5 U5588 6.8 ZN PIASTRA POSTERIORE VITE M10X1,5X35 U5739 8.8 ZN SPINA 15X62 ZN RONDELLA 28X2,5X10,25 SUPPORTO SEGNAFILE DX BRACCIO SEGNAFILE DX RONDELLA 32X4X15,5 VITE M14X2X200 U5737 8.8 BR DADO M14X 2 U5588 6.8 ZN DISCO D.320 LIM.COMPL.ST-MTE VITE M8X1,25X20 U5732 4.6 ZG DADO M 8X1,25 U5588 6.8 ZN DADO M18X 2,5 D982 8 ZN ROS.M8 8,4X 24X 2 U6593 ZN ANELLO E. DI 47X1,75 U7437 C70 ANELLO OR 50,52X1,78 NBR CUSC.d20 D47 B14 6204 2RSH PERNO SEGNAFILE SUPP.CUSCINETTI DISCO SEGN.ZN. DISCO SEGNAFILE D.320 CHIUSURA CUSCINETTO ZN ASS.LIMITATORE PROFONDITA' BOCCOLA 21 X25 X12 ZN FONDELLO ZN. VITE M16X2X55 U5737 10.9 ZD DISCO D.320 COMPL.MAGICA ROS.M10 10,5X 20X 2 U6592 ZN PERNO REGGIDISCO SEGN.MAGICA MANICOTTO DISCO ZN CAV.T.M10X 1,5X 30 46X168,5ZN SUPPORTO MANICOTTO TQ.50 SPINA DI SICUREZZA D.8X45 ZN

ROW MARKER ARM LEFT NUT M10X 1,5 D982 8 ZN CHAIN WITH SPRING CATCH SNAP PIN D9 B/83 ZN L.ROWMARKER SUPPORT RUBBER BUFFER- CYLINDR.D50X21 ROWMARKER CYLINDER.D.30X40-155 SPLIT PIN 4 X25 1336 GALVAN. GALVANIZED PIN 15X120 WASHER 29,8X2X16,5 TRACTION SPRING LIFT. FU NUT M10X 1,5 U5588 6.8 ZN REAR PLATE BOLT M10X1,5X35 U5739 8.8 ZN PIN 15X62 ZN WASHER 28X2-5X10-25 R.ROWMARKER SUPPORT ROW MARKER ARM RIGHT WASHER 32X4X15-5 BOLT M14X 2X200 U5737 8.8 ZB NUT M14X2 SIDE SHIELD DISK D320 COMP. ST BOLT M8X1,25X20 U5732 4.6 ZN NUT M8 X1,25 U5588 6.8 ZN NUT M18X 2,5 D982 8 ZN WASHER M8 8,4X 24X 2 U6593 ZN SEEGER RING 47X 1,75 U7437 C70 GASKET OR 50,52X1,78 NBR BEARING d20 D47 B14 6204 2RSH ROWMARKER PIN GALVAN. ROWMARKER DISK BEARING ROW MARKER DISK D.320 END BEARING ZN LIMITER DEPTH COUPLYNG BUSHING 21 X25 X12 ZN BOTTOM ZN. BOLT M16X2X55 U5737 10.9 ZD DISK D.320 COMPLETE MAGICA WASHER M10 10,5X20X2 U6592 ZN BOLT DISC HOLDER ROW-MARKER DISK SLEEVE U BOLT U BOLT T.M10X1,5X30 46X L168,5 SLEEVE SUPPORT TQ.50 SAFETY PIN D.8X45 ZN

cod. G19531191

Description

Benennung

Descripcion

ECROU M10X 1,5 D982 8 ZN CHAINETTE AVEC MOUSQUETON FICHE A DETENTE D9 B/83 ZN

SCHEIBE M10X 1,5 D982 8 ZN KETTE MIT KARABINERHAKEN EINRASTSTIFT D9 B/83 ZN

TUERCA M10X 1,5 D982 8 ZN CADENA CON GANCHO CLAVIJA DE MUELLE D9 B/83 ZN

PARE-CHOCS CYL. D50X21 CYLINDRE TRACEUR 30X40-155 GOUPILLE 4 X25 1336 ZN GOUPILLE 15X120 ZN RONDELLE 29,8X2X16,5 RESSORT TRACT. LEVAGE FU ECROU M10X 1,5 U5588 6.8 ZN

PUFFER ZYL.50X21 ZYLINDER SPURREISSER.30X40-155 SPLINT 4 X25 1336 ZN STIFT 15X120 ZN UNTERLEGSCHEIBE 29,8X2X16,5 ZUGFEDER HEBUNG FU MUTTER M10X 1,5 U5588 6.8 ZN

PARAGOLPES CIL.D50X21 CILINDRO MARC.FILAS 35X40-155 PASADOR 4 X25 1336 ZN CLAVIJA 15X120 ZN ARANDELA 29,8X2X16,5 MUELLE TRAC. LEVDEL. FU TUERCA M10X 1,5 U5588 6.8 ZN

VIS M10X1,5X35 U5739 8.8 ZN GOUPILLE 15X62 ZN RONDELLE 28X2-5X10-25

SCHR. M10X1,5X35 U5739 8.8 ZN BOLZENSTIFT 15X62 ZN UNTERLEGSCHEIBE 28X2-5X10-25

TORN. M10X1,5X35 U5739 8.8 ZN PASADOR 15X62 ZN ARANDELA 28X2-5X10-25

RONDELLE 32X4X15-5 VIS M14X2X 200 U5737 8.8 ZB ECROU M14X2

UNTERLEGSCHEIBE 32X4X15-5 SCHRAUBE M14X 2X200 U5737 8.8 MUTTER M14X2

ARANDELA 32X4X15-5 TORNILLO M14X2X200 5737 8.8 ZB DADO M14X2

VIS M8X1,25X20 U5732 4.6 ZN ECROU M8 X1,25 U5588 6.8 ZN ECROU M18X 2,5 D982 8 ZN RONDELLE M8 8,4X 24X2 U6593 ZN SEEGER E. 47X 1,75 U7437 C70 BAGUE OR 50,52X1,78 NBR

SCHRA. M8X1,25X20 U5732 4.6 ZN MUTTER M8 X1,25 U5588 6.8 ZN MUTTER M18X 2,5 D982 8 ZN SCHEIBE M8 8,4X 24X 2 U6593 ZN SEEGERING E. 47X1,75 U7437 C70 RING OR 50,52X1,78 NBR

TORN. M8X1,25X20 U5732 4.6 ZN TUERCA M8 X1,25 U5588 6.8 ZN TUERCA M18X 2,5 D982 8 ZN ARANDELA M8 8,4X 24X2 U6593 ZN ANILLO E. 47X 1,75 U7437 C70 ANILLO OR 50,52X1,78 NBR

SUPPORT ROULEMENTS DISQUE TRAC DISQUE TRACEUR D320

SCHEIBENLAGERHALTERUNG SPURREISSERSCHEIBE D. 320

SOPORTE COJINETE DE DISCO MARC DISCO MARCARDOR DE FILAS O 320

GR. ASS. LIMITEUR DE PROFONDEU

TIEFENBEGRENZERKOMPLEX

CONJ. LIMITADOR DE PROFUNDIDAD

RONDELL.M10 10,5X20X2 U6592 ZN

SCHEIBE M10 10,5X20X2 U6592 ZN

ARAND. M10 10,5X20X2 U6592 ZN

MANCHON DISQUE ETRIER EN U M10 ZN

SCHEIBENMUFFE U-BOLZEN M10 ZN

MANGUITO DISCO PERNO EN U M10 ZN

FICHE EL.DE SECURITE D.8X45 ZN

SCHERSTIFT D.8X45 ZN

CLAVIJA DE SEGURIDAD D 8X45 ZN

TAV. 040

8 15

10 14

17 16 4

6 7 5

9 12

23 2 20 2 3

2 14

13 - L. 2750 21

2 11 - L. 3500 1

cod. G19531191

IMPIANTO OLEODINAMICO SEGNAFILE Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

G14217360 F01500012 F03150266 G22270463 F20110770 F01200306 G18700690 G15412351 F01020068 F01200244 G15210561 G16611050 G15210553 F03150859 F05150325 F03150211 F03151237 F03150935 G13811211 F03151226 G16011690 F03100191 G16013820

TAV. 040

Descrizione

Description

Benennung

Descripcion

MONT.CILINDRO SI-ST RONDELLA IN RAME 1/4" NIPPLO MM CIL-CIL 1/4-1/4 ZN TUB.TR.1/4R2 F-F 1/4 L1500 LM CAV.Q.B=80 M=14X2 L=119 DADO M14X 2 U5588 6.8 ZN RONDELLA 15 X40 X6 ZN SUPPORTO VALVOLA VITE M 8X1,25X40 U5737 8.8 ZN DADO M 8X1,25 U5588 6.8 ZN TUBO 1/4R2 CF1/4- F1/4 3500 VALVOLA SEGNAFILE CN COMPL TUBO 1/4R2 CF45 1/4-F 1/4 2750 CURVA 90°F.GIREV.1/4 - M.1/4 CAPPUC.F X INN.M RAP.1/2 ROSSO NIPPLO MM CIL-CIL 1/2-1/4 ZN ROS. 21 X27X1,5 RAME -1/2" INNESTO RAP.MASCH.1/2 A VALV. TUBO X COLLEG. AL TRATTORE REGOL.DI FLUSSO VRF 1/4' GAS MONT.NIPPLO 1/4 GRANO F.1,0 KIT GUARNIZ.CILINDRO 15413110 VALVOLA SEGNAFILE COMPL

ROWMARKER CYLINDER.D.30X40-155 COPPER WASHER 13X19X1,5-1/4" NIPPLE GALV.CYL.MALE 1/4 ZN TUBE TR.1/4R2 F-F1/4 L1500 LM U BOLT Q.B=80 M=14X2 L=119 NUT M14X2 WASHER 15 X 40 X 6 ZN VALVE SUPPORT BOLT M8X1,25X40 U5737 8.8 ZN NUT M8 X1,25 U5588 6.8 ZN PIPE 1/4R2 CF1/4- F1/4 3500 ROWMARKER VALVE ASSY. PIPE 1/4R2 CF45 1/4-F 1/4 2750 ELBOW 90° F. SWIVEL 1/4 -M.1/4 COVER CONNECT F 1/2 RED NIPLE MM CIL-CIL 1/4-1/2 ZN COPPER WASHER 21X27X1,5 1/2 QUICK CONNECT MALE CONE 1/2 PIPE FOR CONNECTION TO TRACTOR 1/4' GAS VALVE VRF UPRIGHT 1/4'' NIPPLE WITH GRUB CYLINDER SEAL KIT 15413110 ROWMARKER VALVE ASSY.

CYLINDRE TRACEUR 30X40-155 RONDELLE NIPPLE MALE CYL. 1/4 ZN TUB.TR.1/4R2 F-F 1/4 L1500 LM BRIDE U M14X2X50 96X119 ZN ECROU M14X2 RONDELLE 15 X40 X6 ZN

ZYLINDER SPURREISSER.30X40-155 SCHEIBE NIPPELZYL.1/4 ZN ROHR1/4R2 F-F 1/4 L1500 LM ANSCHLANG U M14X2X50 96X119 ZN MUTTER M14X2 UNTERLEGSCHEIBE 15 X40 X6 ZN

CILINDRO MARC.FILAS 35X40-155 ARANDELA NIPLE MACHO CIL.1/4 ZN TUB.TR.1/4R2 F-F 1/4 L1500 LM EL.DE EMPALME M14X2X50 96X119 DADO M14X2 ARANDELA 15 X40 X6 ZN

VIS M 8X1,25X40 U5737 8.8 ZN ECROU M8 X1,25 U5588 6.8 ZN TUBE 1/4R2 CF1/4- F1/4 3500 SOUPAPE TRACEUR COMPL.

SCHRA. M8X1,25X40 U5737 8.8 ZN MUTTER M8 X1,25 U5588 6.8 ZN ROHR 1/4R2 CF1/4- F1/4 3500 KOMPL. SPURREISSERVENTIL

TORNIL.M8X1,25X40 U5737 8.8 ZN TUERCA M8 X1,25 U5588 6.8 ZN TUBO 1/4R2 CF1/4- F1/4 3500 V-LVULA MARC. DE FILAS COMPL

COUDE 90° F.TOURN.1/4 - M.1/4 COUVERCLE CONNEXION F 1/2 ROSE NIPLE MM 1/4-1/2 ZN RONDELLE CUIVRE 21X27X1,5 1/2 CONNEXION RAPIDE MALE CONE 1/2 TUBE POUR CONN. AU TRACTEUR SOUPAPE REG DEBIT VRF 1/4" GAZ MONTANT NIPPLE 1/4 AVEC GRAIN KIT GARNIT. CYLINDRE 15413110 SOUPAPE TRACEUR COMPL.

KNIESTsCK 90[ F.DREHB.1/4 - M. DECKEL W 1/2 SCHNELLKUPP. ROT NIPLE GG 1/4-1/2 ZN SCHEIBE KUPFER 21X27X1,5 1/2 SCHNELLKUPP.GEWINDE KONISC 1/2 ROHR F. KUPPLUNG AM SCHLEPPER VENITL VRF 1/4' GAS STZNDER NIPPEL 1/4 MIT STIFT 8 KIT ZYLINDERDICHTUNG 15413110 KOMPL. SPURREISSERVENTIL

CURVA 90 F.GIRAT.1/4 - M.1/4 PAC PROTECCION F 1/2 ROJO NIPLE MM 1/4-1/2 ZN ARANDELA COBRE 21X27X1,5 1/2 ACOPLAMIENT.RAP.MACHO CONO 1/2 TUBO P/CONEXIN AL TRACTOR T VæLVULA VRF 1/4' GAS MONT.NIPLE 1/4 TORNIL.SIN CABE KIT JUNTA CILINDRO 15413110 V-LVULA MARC. DE FILAS COMPL

cod. G19531191

TAV. 051 31 - 540 giri/min. 12 - 1000 giri/min.

28 - 540 giri/min. 54 - 1000 giri/min. 37

35 19

43 36 34

29 20 30

38 27

9 16

40 53

26 41

16 540 giri/min. - 25 1000 giri/min. - 55

24 10

16 13 2

6 22 23

17 15 14

10 48 3

57 58 49

45 51 Vedi TAV. 281 See TAV. 281

3 59

23 50

46 - (mt. ____)

cod. G19531191

TAV. 051

DEPRESSORE Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

F01020047 F01430047 F01420036 F03150722 G15450440 F01230143 G13912060 G13912050 G22230335 F01020403 G22230015 G15450500 F01220011 F02050112 F02050403 F04010215 G22230010 F01020476 G15850200 G22270134 G15450061 F01430023 F01200270 G22270369 G22230012 G20970035 F01200293 F06010160 F05150479 G22250274 G15450342 F03151288 G19002131 F01200306 F20110770 G20970142 G15450390 F03151200 G15450270 F03100391 G22230014 G15450091 G15450051 F01020472 G15450280 F03100506 G22270093 F01020050 F05150058 G10150291 F08011711 F05050020 F03151206 F06010161 G15450310 F03151356 G19005570 F02300025 G18903850 G18903860

Descrizione

Description

Benennung

Descripcion

VITE M6X1X70 U5737 8.8 ZN ROS.M6 6,4X 11X0,7 U8842J ZN ROS.M6 6,4X 18X 2 U6593 ZN TAPPO 700 M52X2 CONVOGLIATORE 8 USCITE * DADO M24X 2 D982 8 ZN PIASTRINA DI TENUTA RONDELLA DI FERMO INVOLUCRI DEPRESSORE VITE M6X1X16 U5739 8.8 ZN GIRANTE PROTEZIONE CINGHIA 1000 GIRI DADO M 6X 1 D980 8 ZN ANELLO E. DE 30X 1,5 U7435 C70 ANELLO E. DI 72X 2,5 U7437 C70 CUSC.D30 D72 B19 6306 2RSC3 EX DISTANZIALE CUSCINETTI VITE M10X1,5X30 U5739 8.8 ZN INCASTELLATURA DEPRESSORE SUPPORTO VACUOMETRO SP SUPPORTO SX ROS.M10 10,5X 18X0,9 U8842J ZN DADO M10X 1,5 U5588 6.8 ZN P.DI P.CON CODOLO PULEGGIA MOTRICE RONDELLA 32X4X13 DADO M12X1,75 U5588 6.8 ZN CINGHIA POLY V 1287 J-16 GOLE ROND.APPOGGIO MANOMETRI SV COLLEGAMENTO MANOMETRI SP-SV PROTEZ.CINGHIA DEPRES.COMPLETO VACUOM.0-100 MBAR C.SM.INC.D80 PROTEZIONE P.D.P. DADO M14X 2 U5588 6.8 ZN CAV.Q.B=80 M=14X2 L=119 RONDELLA 32X4X15,5 PULEGGIA CONDOTTA RACCORDO 90° C5 1/8' 6/8 VITE 10X130 8.8 FIL.60 ZN TUBO POLIURETANO 8-6 DISTANZIALE SUPPORTO PULEGGIA CONDOTTA SUPPORTO DX VITE M10X1,5X25 U5739 8.8 ZN PROTEZIONE DEPRESSORE TUBO EOLO PU D.45 VACUOMETRO COMPL. SP LM VITE M6X1X80 U5737 8.8 ZN FASCETTA POLYAM.7,8X550 31920 GRIGLIA PROTEZIONE ZN CARD.B1 Z6-Z6 L700 TAPPO SALVAFILETTO D.39 RACCORDO DIR. C1 1/8' 6/8 CINGHIA POLY V 1016 J-16 GOLE PULEGGIA MOTRICE 1000 GIRI VETRO VACUOM.0-100 MBAR D80 CUFFIA PROTEZIONE PTO FASCETTA STRING. 90/110 H.12 MOLLA SPEC.ZN GUIDA 2 TUBI DEP MOLLA GUIDA 3 TUBI ZN

BOLT M6X 1X70 U5737 8.8 ZN WASHER D6 DIN 6798 D.INT.GALV. FLAT WASHER 6-6X 18X2 6593 ZN M52 X 2 PLUG 700

VIS 6 X70 5737 8.G ZN RONDELLE D6 DIN 6798 D. INT. Z ROND. PLATE 6-6X 18X2 6593 ZN BOUCHON M52 X 2

SCHRAUBE 6 X70 5737 8.G ZN UNT. SCHEIBE D6 DIN 6798 D. IN SCHEIBE 6-6X 18X2 6593 ZN PFROPFEN M52 X 2

TORNILLO 6 X70 5737 8.G ZN ARANDELA D6 DIN 6798 D.INT.ZN ARAND. PLANA 6-6X 18X2 6593 ZN TAPN M52 X 2 D

NUT M24X2 D982 8 ZN STOP PLATE STOP WASHER VACUUM PUMP CASINGS BOLT M6X1X16 U5739 8.8 ZN ROTOR BELT GUARD 1000 RPM NUT M6X1 D980 8 ZN SEEGER RING 30X 1,5 U7435 C70 SEEGER RING E.72X2,5 U7437 C70 BEARING D30 D72 B19 6306 2RSC3 BEARING SPACER BOLT M10X1,5 X 30 5739 8.8 ZN DIFFUSION AIR PUMP FRAME VACUUM METER SUPPORT SP LEFT SUPPORT WASHER D10 DIN 6798 D.INT.ZN NUT M10X 1,5 U5588 6.8 ZN POWER TAKE-OFF- W/ SPIGOT DRIVING PULLEY 540 WASHER 32X4X13 NUT M12X1,75 U5588 6.8 ZN BELT POLY V 1287 J-16 CU GAT PRESSURE GAUGE REST WASHER PRESSURE GAUGE CONNECT. SP-SV DEPRES. COMPL.PROTECTION BELT VACUUM METER 0-100 MBAR C.SMOR PDP GUARD NUT M14X2 U BOLT Q.B=80 M=14X2 L=119 WASHER 32X4X15-5 DRIVEN PULLEY D.28 UNION 90° C5 1/8'' 6/8 GALVANIZ. BOLT 10X130 8.8 FIL POLIURETHAN PIPE 8-6 SPACER DRIVEN PULLEY SUPPORT RIGHT SUPPORT BOLT 10X25 5739 8.G GALVANIZED VACUUM PUMP PROTECTION TUBE EOLO PU D.45 VACUUM METER ASSY. SP LM BOLT M6X 1X80 U5737 8.8 ZN POLYAM.CLAMP 7,8X550 31921 AIR PUMP PROTECT. GRID PTO SHAFT B1 Z6-Z6 L700 CONVEYOR PLUG D.39 UNION STRAIGHT C1 1/8'' 6/8 BELT- POLY V 1016 J-16 GOLE DRIVING PULLEY 1000 REVS VETRO VACUOM.0-100 MBAR D80

ECROU M24X2 D982 8 ZN PLAQUETTE DE TENUE RONDELLE DE BLOCAGE ENVELOPPES DEPRESSEUR VIS M6X1X16 U5739 8.8 ZN

MUTTER M24X2 D982 8 ZN DICHTPLZTTCHEN FESTSTELLSCHEIBE sLLEN VAKUUMPUMPE C SCHRAUBE M6X1X16 U5739 8.8 ZN

TUERCA M24X2 D982 8 ZN PLACA DE RETENCIN P ARANDELLA DE BLOQUEO AJAS BOMBA VACO CA TORNILLO M6X1X16 U5739 8.8 ZN

PROTECTION COURROIE 1000 TOURS ECROU M6X1 D980 8 ZN SEEGER E. 30 X 1,5 U7435 C70 SEEGER E. 72X 2,5 U7437 C70 PALIER 6306 2RS C3 ENTRETOISE PALIERS VIS M10X1,5 X 30 5739 8.8 ZN B-TI POMPE A D+PRESSION SUPPORT VACUOMETRE SP

RIEMENSCHUTZ 1000 UMDR. MUTTER M6X1 D980 8 ZN SEEGERING E. 30X 1,5 U7435 C70 SEEGERING E. 72X 2,5 U7437 C70 LAGER 6306 2RS C3 DISTANZSTsCK LAGER SCHRA. M10X1,5X 30 5739 8.8 ZN GESTELL VAKUUMPUMPE HALTERUNG VAKUUMMETER SP

PROTECCIN CORREA 1000 REV. P TUERCA M6X1 D980 8 ZN ANILLO E. 30 X 1,5 U7435 C70 ANILLO E. 72X 2,5 U7437 C70 COJINETE 6306 2RS C3 DISTANCIADOR COJINETES TORN. M10X1,5 X 30 5739 8.8 ZN ARMAZËN BOMBA VAC-O SOPORTE VACUMETRO SP S

RONDELLE D10 DIN 6798 D. INT. ECROU M10X 1,5 U5588 6.8 ZN PRISE DE FORCE AVEC CONE POULIE MOTRICE 540T RONDELLE 32X4X13 ECROU M12X1,75 U5588 6.8 ZN COURROIE POLY V 1287 J-16 GOR ROND. LOGEMENT MANOMETRES SV RACCORD MANOMETRES SP-SV

UNT. SCHEIBE D10 DIN 6798 D.IN MUTTER M10X 1,5 U5588 6.8 ZN KRAFTABTRIEB MIT ENDSTsCK ANTRIEBSSCHEIBE 540 UNTERLEGSCHEIBE 32X4X13 MUTTER M12X1,75 U5588 6.8 ZN 0 STsTZSCHEIBE MANOMETER SV VERBINDUNG MANOMETER SP-SV

ARANDELA D10 DIN 6798 D.INT.ZN TUERCA M10X 1,5 U5588 6.8 ZN TOMA DE FUERZA CON MANGO POLEA MOTRIZ 540 ARANDELA 32X4X13 TUERCA M12X1,75 U5588 6.8 ZN BANDA POLY V 1287 J-16 GOLE ARAND. SOPORTE MANOMETROS SV CONEXIN MANMETROS SP-SV LE

VACUOMETRE 0-100 MBARS A/SUPPO

VAKUUMMETER 0-100 MBAR M. DZMP

VACUM. 0-100 MBAR C.ATEN.INC.V

ECROU M14X2 BRIDE U M14X2X50 96X119 ZN RONDELLE 32X4X15-5 POULIE ENTRAINEE D. 28 RACCORD 90° C5 1/8'' 6/8 VIS 10X130 8.8 FIL.60 ZN

MUTTER M14X2 ANSCHLANG U M14X2X50 96X119 ZN UNTERLEGSCHEIBE 32X4X15-5 GETRIEBENE SCHEIBE D.28 ANSCHLUSSTsCK 90° C5 1/8' 6/8 SCHRAUBE 10X130 8.8 GEW.60 ZN

DADO M14X2 EL.DE EMPALME M14X2X50 96X119 ARANDELA 32X4X15-5 POLEA CONDUCIDA D.28 UNION 90° C5 1/8'' 6/8 TORNILLO 10X130 8.8 FIL.60 ZN

ENTRETOISE SUPPORT POULIE ENTRAINEE

DISTANZSTsCK HALTERUNG GETRIEBENE RIEMENSCH

DISTANCIADOR SOPORTE POLEA CONDUCIDA

VIS 10X25 5739 8.G ZN PROTECTION DEPRESSEUR TUBE EOLO PU D.45 VACUOMETRE COMPL. SP LM VIS 6 X80 5737 8.G ZN

SCHRAUBE 10X25 5739 8.G ZN SCHUTZ VAKUUMPUMPE

TORNILLO 10X25 5739 8.G ZN PROTECCIN BOMBA DE VACO

KOMPL. VAKUUMMETER SP LM SCHRAUBE 6 X80 5737 8.G ZN

VACUMETRO COMPL. SP LM TORNILLO 6 X80 5737 8.G ZN

GRILLE DE PROTECT.DISP. DEPRES

SCHUTZGITTER VAKUUMPUMPE

REJILLA DE PROTECCIN BOMBA VAG

BOUCHON PROTEGE-FILET D. 39 RACCORD DRT. C1 1/8'' 6/8 COURROIE POLY-V 1016 J-16 GORG POULIE MOTRICE 1000T

GEWINDESCHUTZPFROPFEN D.39 ANSCHLUSSTsCK GERADE C1 1/8'' RIEMEN POLY-V 1016 J-16 RILLEN ANTRIEBSSCHEIBE 1000 UMDREHUNG

TAPN GUARDARROSCA D.39 D UNIN DER. C1 1/8'' 6/8 R CORREA POLY-V 1016 J-16 GARGA POLEA MOTRIZ 1000 REVOLUCIONES

STRING FASTENING STRAPS 90/110 GUIDE SPRING 2 PIPE DEPRESS. GUIDE SPRING 3 PIPE ZN

COLLIER DE SERRAGE 90/110

ROHRSCHELLE 90/110

ABRAZADERA APRET. 90/110

cod. G19531191

PR V

TAV. 060 7

(*) Kit = 2+2 pz. (16x16)

6 3 1

10 4

16x16

8 (*)

20x20 1

29 15

32 31

16 11

3 7

5 13

17 18

37 (*)

35 20

23 24

20 22

30 (**) Kit = 2 pz. (20x20)

cod. G19531191

TAV. 060

SCATOLA DI RINVIO ELEMENTO Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37

F01020403 G22220103 F01100011 G18700510 G15423980 G22220102 F01220011 G22270389 G22220073 G66349001 F02100114 G22270452 G22270454 G19002840 G19204080 G19204090 G65338039 G65338018 G66248102 G22220105 F02050045 G66248057 F02100121 G17120181 G22505073 F01220022 F01020440 G17120531 G17121113 G22505069 G16620880 F02050179 G19006590 G19006580 G20970141 G17120550 G16621250

Descrizione

Description

Benennung

Descripcion

VITE M6X1X16 U5739 8.8 ZN CONCHIGLIA SX ING.M 6X1 7663-A 9SMNPB28 ZN RONDELLA 31 X40 X0,6 ZN FORCELLE SNODO ESCL.ELET.COMPL CONCHIGLIA DX DADO M 6X 1 D980 8 ZN 2+2 INGR.SCATOLA DI RINVIO > RONDELLA 28X0,3X16,5 BOCCOLA SPINA E.P. 6X 30 U6873 C70 BR ALBERO SCATOLA RINVIO SP/S CROCIERA COMPL. SP/S COPRICARDANO SUPERIORE FORCELLA FORCELLA MOLLA COMP.ZN INNESTO SP MOLLA COMP.ZN SCATOLA RINV.SP ANELLO SICUREZZA SP BOCCOLA DI SPINTA ANELLO E. DE 16X 1 U7435 C70 SPINA DI SICUREZZA SP SPINA E.P. 6X 40 U6873 C70 BR PERNO D.16X240 CARDANO ZN > MANICOTTO DI INNESTO MT DADO M 8X1,25 D980 8 ZN VITE M 8X1,25X25 U5739 8.8 ZN SCATOLA RINVIO Q.16 EL.MA COMP SCAT.RINVIO Q.20 EL.MA COMPL. CONCHIGLIA SX ASS.CONCHIGLIA DX ANELLO E. DE 42X1,75 U7435 BOCCOLA INT.SCATOLA RINVIO BOCCOLA EST.SCATOLA RINVIO RONDELLA 50X37X0,6 MONT.BOCC.SINTERIZ.18X26L42 > KIT INGR.RINVIO ACC. Q.20(1+1)

BOLT M6X1X16 U5739 8.8 ZN LEFT SHELL GREASE NIPPLE M6X1 7663-A ZN GROWER 32 X 40 X 0,6 ZN COMPLET FORK ELECTRIC SWITCH O RIGHT SHELL NUT M6X1 D980 8 ZN 2+2 INTERM. TRANSM. GEAR BOX WASHER 28X0-3X16-5 BUSHING ELASTIC PIN 6X30 INTERMEDIATE BOX SHAFT SPIDER SP/S TOP CARDAN JOINT COVER FORK FORK ZN COUPLING COMP. SPRING SP TRANSM. BOX COMP. SPRING . SP SAFETY RING THRUST BUSHING SEEGER RING 16X 1 U7435 C70 SAFETY PIN SP ELASTIC PIN 6X40 PIN D.16X240 CARDAN ZN COUPLING SLEEVE MT NUT M8X 1,25 D980 8 ZN BOLT M8X1,25X25 U5739 8.8 ZN TRANS. BOX Q.16 EL. MA ASS.BLY

VIS M6X1X16 U5739 8.8 ZN

SCHRAUBE M6X1X16 U5739 8.8 ZN

TORNILLO M6X1X16 U5739 8.8 ZN

GRAISS. A BILLE M6X1 7663A ZN

SCHMIERBUECHE M6X1 7663-A ZN

ENGRAS. DE ESFERAS M6X1 7663-A

COQUILLE DRT. ECROU M6X1 D980 8 ZN COUPLE CON RENV ANGLE (2+2) RONDELLE 28X0-3X16-5 BOITE GOUJON ELASTIQUE 6X30 ARBRE TRANSMISSION SP/S CROSILLON COMPL CARDAN TRANSM COUVRE-CARDAN SUPERIEUR

SCHALE RECHTS MUTTER M6X1 D980 8 ZN 2+2 ZAHNRZDER VORGELEGEGEHZUSE UNTERLEGSCHEIBE 28X0-3X16-5 B_CHSE SPANNHUELSE 6X30 WELLE VORGELEGEGEHZUSE SP/S GELENKKREUZ KOMPL. SP/S OBERE KARDANABDECKUNG

MOLDE DER. TUERCA M6X1 D980 8 ZN 2+2 ENGRANAJES CAJA DE LA TRAN ARANDELA 28X0-3X16-5 CASQUILLO ESPINA ELASTICA 6X30 æRBOL CAJA DE TRANSMISIN SP/SA CRUCETA COMPL. SP/S CUBRECARDæN SUPERIOR

RESSORT COMPL. ZN ACCOUPLEM. RESSORT COMPL. ZN TRANSMISSION BAGUE SECURITE SP BOITE DE POUSSEE BAGUE SEEGER 16 X 1 U7435 C70 BROCHE PLASTIC SECURITE CARDAN GOUJON ELASTIQUE 6X40

DRUCKFEDER ZN KUPPLUNG SP MUELLE COMP.ZN ACOPLAMIENTO SP DRUCKFEDER ZN VORGELEGEGEHZUSE MUELLE COMP.ZN CAJA TRANSFER.. SICHERHEITSRING SP ANILLO DE SEGURIDAD SP SCHUBBsCHSE CASQUILLO DE APRIETE SEEGERING 16 X 1 U7435 C70 ANILLO 16X 1 U7435 C70 SICHERHEITSSTIFT SP CLAVIJA DE SEGURIDAD SP SPANNHUELSE 6X40 PASADOR 6X40

MANCHON D'ACCOUPLEMENT MT ECROU M8X 1,25 D980 8 ZN VIS M8X1,25X25 U5739 8.8 ZN

KUPPLUNGSMUFFE MT MUTTER M8X 1,25 D980 8 ZN SCHRA. M8X1,25X25 U5739 8.8 ZN

MANGUITO DE ACOPLAMIENTO MT TUERCA M8X 1,25 D980 8 ZN TORNIL.M8X1,25X25 U5739 8.8 ZN

LEFT SHELL

COQUILLE GCH.

SCHALE LINKS

MOLDE IZQ.

COMPRESSION RING D.42

ANNEAU RESSORT D.42

RING D.42

ANILLO D.42

WASHER 50X37X0-6

RONDELLE 50X37X0-6

UNTERLEGSCHEIBE 50X37X0-6

ARANDELA 50X37X0-6

cod. G19531191

GEARS Q.20(1+1)

TAV. 072 49 64

63 48 3

39 40

60 23

2,5m m 29

18 13 41 12

6 7

lite

30 5

11 38

40 18 4 2

35 28

45 59

48 56

14 62

9 52 10 61

51 53

36 33

37 31

lite

50 16 21

60 17

cod. G19531191

TAV. 072

DISTRIBUTORE SEMI Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64

G22230046 G22270390 G66248094 G66349008 G22230035 G22230040 G22230041 G15223701 G22230037 G16620470 G22230039 G66349002 G22270071 G22270204 G17722580 G17722990 G19006960 G22220073 F01420037 G18902951 G18903180 G19002620 G66248219 G16620540 G16620530 F01020403 F01020382 F01020432 F01020451 F01070011 F01240024 F01230019 F01200244 F01410023 F01410051 F01430059 F01460115 F02200137 F02100079 F02100083 F02150012 F02200200 G15421870 GA5220361 G19002750 F01420036 F01020403 F01220011 G15226240 F01200220 F01430035 G16620010 F01020381 G22270133 G16620360 G18701890 F01030055 G15224471 G17722791 G17722622 F01070011 G18904240 F01020404 G19005480

Descrizione

Description

Benennung

Descripcion

ASSE TRASMISSIONE DISCO KIT COPPIA CONICA DISTRIB.SEMI COPRICARDANO SP BOCCOLA COPERCHIO SCATOLA INGRAN. SELETTORE MOBILE COMPLETO SELETTORE FISSO COPERCHIO CORPO MT TENUTA GUARNIZIONE TAPPO CENTRALE H=7,5 PERNO COPERCHIO BOCCOLA SINT.BASSOFONDO BOCCOLA COLL.SINTER.20X24 PIASTRA ANTI TRABOCC.SEMI SP MONT.ASSE PORTA PIGNONE FERMO MOLLA ZN (DA G15421151) ESPULSORE SEME MAIS RONDELLA 28X0,3X16,5 ROS.M6 6,4X 24X 2 U6593 ZN MOLLA SPEC.ZN SCARICO MOLLA CONVOGLIATORE MICRO DISTR. COVER GASKET.SP530 ANELLO PARAPOLVERE SP-520 PORTA DI PROTEZIONE PORTA DI CONTROLLO VITE M6X1X16 U5739 8.8 ZN VITE M5X0,8X25 U5739 8.8 ZN VITE M 8X1,25X16 U5739 8.8 ZN VITE M 8X1,25X45 U5739 8.8 ZN VITE M4,2X1,41X9,5 U6950 4.8NI DADO M 8X1,25 U5448 5.8 ZN DADO M 5X 0,8 D982 8 ZN DADO M 8X1,25 U5588 6.8 ZN ROS.M5 5,3X 10X 1 U6592 ZN ROS.M8 8,4X 17X1,6 U6592 ZN ROS.M8 8,4X 15X0,8 U8842J ZN ROS.OND. 8,4X 15X0,5 BR D137A COPIGLIA 2X 15 U1336 ZN SPINA E.P. 5X 16 U6873 C70 BR SPINA E.P. 5X 24 U6873 C70 BR LINGUETTA 5X 5X 10 U6604A COPIGLIA 4X 70 U1336 ZN PORTA DI SCARICO DISTRIBUTORE MONT.CORPO DISTRIBUZIONE MTR COPERCHIO SERBATOIO SEME 530 ROS.M6 6,4X 18X 2 U6593 ZN VITE M6X1X16 U5739 8.8 ZN DADO M 6X 1 D980 8 ZN MONT.SERB.SEME 60 LITRI DADO M 5X 0,8 U5588 6.8 ZN ROS.M5 5,3X 10X0,6 U8842J ZN ESPULSORE SEMI BIETOLA VITE M5X0,8X20 U5739 A2 IX PIASTRINA ANTI TRABOC.SEMI MIN DIMA SELETTORE FISSO RONDELLA D.8,5 SVASATA ZN. VITE M 8X1,25X20 U5933 10.9 ZD SERBATOIO SEME COMPLETO MT MONT.COPERCHIO DISTRIB.REGINA PROTEZIONE SX VITE M4,2X1,41X9,5 U6950 4.8NI MOLLA APERTURA PORTA CONTROLLO VITE M6X1X20 U5739 8.8 ZN COPERCHIO SERBAT.SEME 60 LITRI

DISK GEAR AXLE KIT- SEED DISTR. CONICAL PAIR UNIVERSAL JOINT COVER SP BUSHING GEARWHEEL BOX COVER MOBILE SELECTOR ASSY. SELECTOR FIXED BODY COVER MT SEAL CENTRAL PLUG H=7.5 COVER PIN BUSHING- SINTERED 20X24 SINTERED COLLARED BUSH SEED ANTI-OVERFLOW PLATE SP STANC.AXLE FOR PINION SPRING LOCK ZN (DA G15421151) SEED EJECTOR FOR CORN WASHER 28X0-3X16-5 WASHER M6 6,4X24X2 U6593 ZN SPEC SPRING ZN DISCHARGE MICRO CONVEYOR SPRING DISTRIBUTION COVER AIR SEAL MT DUST COVER RING SAFETY HATCH INSPECTION DOOR BOLT M6X1X16 U5739 8.8 ZN BOLT 5 X25 5739 8.G GALVANIZ. BOLT M8X 1.25X16 U5739 8.8 ZN BOLT M8X 1.25X45 U5739 8.8 ZN BOLT- SELF-TAPPING 4-2X9-5T.E. NUT 8 UNI 5448 5.8 ZN NORM.SELF-LOCKING NUT 5 GALVAN NUT M8 X1,25 U5588 6.8 ZN WASHER M5 5,3X 10X 1 U6592 WASHER M8 8,4X17X1,6 U6592 ZN WASHER M8 8,4X15X0,8 U8842J ZN WASHER D8 DIN 137/A SPLIT PIN 2 X15 1336 GALVAN. PIN EL. 5X 16 U6873 C70 BR PIN EL. 5 X24 DIN 1481 PARALLEL KEY 5X 5X 10 U6604A SPLIT PIN 4 X70 1336 GALVAN. DISTRIBUTOR DISCHARGE DOOR

AXE ENTRAINEMENT DISQUE COUPLE CON DISTR GRAINES (2+2) COUVRE-CARDAN SP BOITE COUVERCLE BOITE ENGRENAGE SELECTEUR MOBILE COMPL. SELECTEUR FIXE COUVERCLE CORPS MT BLOQUAGE GARNITURE BOUCHON CENTRAL H=7,5 PIVOT COUVERCLE BOITE FRITTEE BOITE COLLIER FRITTEE 20X24 PLAQUE ANTI-DEBORD.T GRAINES S

ACHSE SCHEIBENANTRIEB KIT KEGELTRIEB SAMEN SZAPPARAT KARDANABDECKUNG SP BsCHSE DECKEL ZAHNRZDERGEHZUSE KOMPL. BEWEGLICHER WZHLER FESTER WZHLER DECKEL KTRPER MT DICHTUNG ZENTRALER PFROPFEN H=7,5 DECKELZAPFEN SYNTH. B_CHSE ANSCHLUSSBUECHSE SINTER.20X24 SAMENsBERLAUFPLATTE SP

EJE TRANSMISIN DISCO A SET PAR CONICO DISTRIB. SEMILL CUBRECARDæN SP CASQUILLO TAPA CAJA ENGRAN. SELECTOR MVIL COMPLETO S SELECTOR FIJO TAPA CUERPO MT JUNTA ESTANCA TAPËN CENTRAL H=7,5 PERNO TAPA CASQUILLO SINT. CASQUILLO CONEX. SINTER.20X24 PLACA ANTI DESBORDAMIENTO SEMI

SEED TANK COVER 530 FLAT WASHER 6-6X 18X2 6593 ZN BOLT M6X1X16 U5739 8.8 ZN NUT M6X1 D980 8 ZN TANK ASSEMBLY SEED 60LT NUT 5 UNI 5588 6.8 GALVANIZED WASHER D5 DIN 6798 D.INT.ZN SUGAR BEET EJECTOR BOLT M5X 0.8X20 U5739 A2 IX MINUTE SEED PLATE SP POSITION PLATE FOR FIXED SELEC FLARED WASHER D.8.5 ZN. BOLT M8X1.25X20 U5933 10.9 ZD SEED TANK ASSY. MT

cod. G19531191

LEFT GUARD BOLT- SELF-TAPPING 4-2X9-5T.E. SPRING BOLT M 6X 1X20 U5739 8.8 ZN COVER SEED HOPPER 60 LITRE

RONDELLE 28X0-3X16-5

UNTERLEGSCHEIBE 28X0-3X16-5

ARANDELA 28X0-3X16-5

RESSORT TRAPPE VIDANGE RESSORT CONVOYEUR MICRO JOINT ETANCH PORTE SP530-MT BAGUE PARE-POUSSIERE SP-520 PORTE DE PROTECTION PORTE CONTROLE VIS M6X1X16 U5739 8.8 ZN VIS 5 X25 5739 8.G ZN VIS M 8X16 VIS M 8X45 VIS AUTOTAR. 4-2X9-5 T. E. COU ECROU 8 UNI 5448 5.8 ZN ECROU AUTOB.NOR.5 ZN ECROU M8 X1,25 U5588 6.8 ZN

SPEZIALFEDER ZN ENTLADUNG FEDER MIKRO FTRDERER DICHTUNG SZAPPARATDECKEL SP530 STAUBSCHUTZRING SP-520 SCHUTZÍFFNUNG KONTROLLTsR SCHRAUBE M6X1X16 U5739 8.8 ZN SCHRAUBE 5 X25 5739 8.G ZN SCHRAUBE M 8X16 SCHRAUBE M 8X45 SELBSTSCHNEID. SCHRAUBE 4-2X9MUTTER 8 UNI 5448 5.8 ZN SELBSTSP. MUTTER NOR.5 ZN MUTTER M8 X1,25 U5588 6.8 ZN

MUELLE ESPEC. ZN DESCARGA MUELLE CONDUCTOR MICRO JUNTA TAPA DISTRIB.SP530 ANILLO GUARDAPOLVO SP-520 PUERTA DE PROTECCIËN PUERTA DE CONTROL TORNILLO M6X1X16 U5739 8.8 ZN TORNILLO 5 X25 5739 8.G ZN TORNILLO M 8X16 TORNILLO M 8X45 TORNILLO AUTORROSC. 4-2X9-5 TUERCA 8 UNI 5448 5.8 ZN TUERCA AUTOB. NOR. 5 ZN TUERCA M8 X1,25 U5588 6.8 ZN

RONDEL. M8 8,4X17X1,6 U6592 ZN ROND. M8 8,4X 15X0,8 U8842J ZN RONDELLE D8 DIN 137/A GOUPILLE 2 X15 1336 ZN

SCHEIBE M8 8,4X17X1,6 U6592 ZN SCHEIBE M8 8,4X15X0,8 U8842JZN UNTERLEGSCHEIBE D8 DIN 137/A SPLINT 2 X15 1336 ZN

ARANDELA M8 8,4X17X1,6 U6592ZN ARAND. M8 8,4X15X0,8 U8842J ZN ARANDELA D8 DIN 137/A PASADOR 2 X15 1336 ZN

FICHE EL. 5 X24 DIN 1481

SPANNSTIFT 5 X24 DIN 1481

CLAVIJA EL.5 X24 DIN 1481

GOUPILLE 4 X70 1336 ZN PORTE DE DECHARGEMENT DISTRIB,

SPLINT 4 X70 1336 ZN ENTLADUNGSTsR SZAPPARAT

PASADOR 4 X70 1336 ZN PUERTA DESCARGA DISTRIBUIDOR

COUVERCLE RES GRAINES 530-MT ROND. PLATE 6-6X 18X2 6593 ZN VIS M6X1X16 U5739 8.8 ZN ECROU M6X1 D980 8 ZN

SAMENBEHZLTERDECKEL 530 SCHEIBE 6-6X 18X2 6593 ZN SCHRAUBE M6X1X16 U5739 8.8 ZN MUTTER M6X1 D980 8 ZN

TAPA DEPSITO SEMILLA 530 A ARAND. PLANA 6-6X 18X2 6593 ZN TORNILLO M6X1X16 U5739 8.8 ZN TUERCA M6X1 D980 8 ZN

ECROU 5 UNI 5588 6.8 ZN RONDELLE D5 DIN 6798 D. INT. Z EXPULSEUR BETTES VIS 5X20 5739 PLAQUETTE GRAINES PETITES SP GABARIT POSITION SELECTEUR FIX RONDELLE D.8,5 +VAS+E ZN. VIS M 8X20 RESERVOIR GRAINES COMPL PLA MT

MUTTER 5 UNI 5588 6.8 ZN UNT. SCHEIBE D5 DIN 6798 D. IN AUSWERFER RÜBEN SCHRAUBE 5X20 5739 PLZTTCHEN KLEINE SAMEN SP EINSTELLEHRE F_R FIXEN ABSTREI F-CHERSCHEIBE D.8,5 ZN. SCHRAUBE M 8X20 SAMENBEHZLTER KOMPLETT MT

TUERCA 5 UNI 5588 6.8 ZN ARANDELA D5 DIN 6798 D.INT.ZN EXPULSOR REMOLACHA TORNILLO 5X20 5739 PLAQUETA SEMILLAS PEQUE¾AS SP PLACA PARA LA POSICIËN SELECTO ARANDELA Ï 8,5 ABOCINADA ZN. TORNILLO M 8X20 DEPSITO SEMILLAS COMPLETO MT B

VIS AUTOTAR. 4-2X9-5 T. E. COU RESSORT VIS M 6X20

SELBSTSCHNEID. SCHRAUBE 4-2X9FEDER SCHRAUBE M 6X20

TORNILLO AUTORROSC. 4-2X9-5 MUELLE TORNILLO M 6X20

TAV. 080 Codice Code Code Kodex Codigo 22230298 22230319 22230327 22230320 22230294

Nr e ø fori Nr and ø holes Nr et ø trous Nr und ø löcher Nr y ø agujeros 20 20 20 20 20

Coltura

Seeds

Cultures

0,8 (1) 1 (1) Cavolo broccolo Broccoli Chou-Broccoli 1,1 (1) Cavolo verza Cabbage,Savoy Chou de Milan 1,5 Zucchino Squash Courgette 2,1

Samen

Semillas

Distanza semina Seeding dist. Dist. de semis Saatabstandes Dist. siembra

22230290 Brokkoli

Bróculi

Wirsing

Col de Milán

22230197

Judias verdes Soja

Anguria

Watermelon

Pastèque

Wassermelone

Sandía

Fagiolo

Beans

Haricot

Bohnen

Poroto

Piselli

Peas

Pois

Erbsen

Arveja

Tournesol

min.10,4 cm.

Mais (Klein)

Maiz (Pequeño)

Mais

Maiz

Mais (Grosso)

Corn (Big)

Mais (Gros)

Ceci

Pulses

Fagiolo borlotto

Beans

Sonnenblumen

Haricot

Maiz (Grueso)

max. 41,7 cm.

Poroto

e cannellino Arachidi

Peanut

Arachidi

Peanut

Lupino

1 (1) 1,5 Zucchino 2,1

4,5

Favino -

Mais (Grosse) Bohnen

Girasol

Baumwohl

22230199

Mais (Petit)

22230295 10123760R 22230304 22230321 22230328 22230299 22230316 22230288 22230194

36 36 36 52 52 52 52 52 72

5,5 5,5 (2) 7 1,5 2,1 2,5 3,5 4,25 0,5 (1)

22230195

Haricot

Bohnen

Poroto

Fagiolo

Beans

Haricot

Bohnen

Poroto

Barbabietola

Beets

Betteraves

Rüben

Remolacha

Fagiolino

Beans (Little)

Haricot (Petit)

Grüne Bohnen

Judias verdes

Soia

Soyabeans

Soja

Endivia

Endive

Chicorèe

Winterendivien

Escarola

Lattuga

Lettuce

Laitue

Kopfsalat

Lechuga

0,8 (1) Endivia

Endive

Chicorèe

Winterendivien

Escarola

Lattuga

Lettuce

Laitue

Kopfsalat

Lechuga

Rapa

Turnip

Navet

Speiserüben

Nabo

min. 4 cm.

Kürbis

Calabacín

Melone

Melon

Melone

Melón

Senape

Mustard

Moutarde

Senft

Anguria

Watermelon

Pastèque

Wassermelone

Sandía

Finocchio

Fennel

Fenouil

Fenchel

Sunflower

Tournesol

Cotone

Cotton

Baumwohl

Mais (Piccolo)

Corn (Little)

Mais (Petit)

Mais (Klein)

Maiz (Pequeño)

Mais

Corn

Mais

Maiz

Mais (Grosso)

Corn (Big)

Mais (Gros)

Mais (Grosse)

Maiz (Grueso)

Sonnenblumen

min. 8 cm.

Anice

22230193

Girasol

1,1 (1) Pomodoro

max. 32,1 cm.

Tomato

Ceci Fagiolo borlotto

Beans

Haricot

Bohnen

1,5

Poroto

e cannellino Arachidi

1,1 (1) Pomodoro Lenticchia 1,5 Cetriolo

Tomato

Tomate

Cucumber

Tomate

22230213

Tomate -

Concombre

Gurke

Pepino

Pomodoro conf. Tomato pilled

Tomate enrobè

Tomate pilliert

Tomate conf.

ø 2,5÷3,5 mm

Barbabietola

Beets

Betteraves

Rüben

Remolacha

Zucchino

Squash

Courgette

Kürbis

Calabacín

Melone

Melon

Melone

Melón

Anguria

Watermelon

Pastèque

Wassermelone

Cardo

Sorgo

Sorghum

Sesamo

Sorgo -

10124020R 22230256

72 72 72 72

2,5 3,5 4,25 4,5

Tomate

Rapa

Turnip

Navet

Speiserüben

Nabo

Fennel

Fenouil

Fenchel

Hinojo

Colza

Canola

Colza

Raps

Colza

Spinacio

Spinach

Epinard

Spinat

min. 2,9 cm. -

Espinaca

Ravanello

Radish

Radis

Radies

Rabanito

Asparagio

Asparagus

Asperge

Spargel

Espárrago

max. 11,6 cm.

Pomodoro conf. Tomato pilled

Tomate enrobè

Tomate pilliert

Tomate conf.

ø 2,5÷3,5 mm

Bieta a coste

Swiss Chard

Poirèe

Mangold

Acelga

Saggina

10124040R 22230198

Tomate

Fagiolino

Beans (Little)

Haricot (Petit)

Grüne Bohnen

Judias verdes

Soia

Soyabeans

Soja

Soia

Soyabeans

Soja

min. 5,8 cm.

Sorgo -

2,1

Sandía

Hirse

Tomate

max. 16 cm.

Hinojo

Finocchio Panico

22230257

Beans

Courgette

Girasole

Distanza semina Seeding dist. Dist. de semis Saatabstandes Dist. siembra

max. 23,2 cm.

Fagiolo

Squash

Cardo

Ginseng

Grüne Bohnen

Arveja

Mais

2,1

Ginseng

Haricot (Petit)

Soja

Corn (Little)

Ginseng

Beans (Little)

Erbsen

Corn

22230051

Ginseng

Fagiolino

Soja

Mais (Piccolo)

36 36

Ginseng

Pois

Mais

22230317 22230196

ø 3,5÷4,5 mm

Soyabeans

4,5 5,5

4,5 5 5,5

Tomate conf.

ø 3,5÷4,5 mm

Peas

20 20

26 26 26

Tomate pilliert

ø 3,5÷4,5 mm

Soia

22230048 22230047

22230050 22230303 22230049

Tomate enrobè

ø 3,5÷4,5 mm

Piselli

Cotton

2,5 3,5

Pomodoro conf. Tomato pilled ø 3,5÷4,5 mm

Calabacín

Sunflower

26 26

Semillas

Melón

Cotone

22230289 22230249

Samen

Kürbis

Girasole

26 26 26

3,5

Cultures

Melone

2,5 3,5

10124030R 22230253 22230296

2,5

Seeds

Melon

20 20

Coltura

Melon

22230203 22230192

Nr e ø fori Nr and ø holes Nr et ø trous Nr und ø löcher Nr y ø agujeros

Melone Cardo

22230205

Codice Code Code Kodex Codigo

cod. G19531191

TAV. 080

DISCHI DI SEMINA Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58

G22230327 G10123970 G10124010 G10124020 G10124030 G10124040 G10124050 G10124060 G10124070 G10124090 G10124100 G22230047 G22230048 G22230049 G22230050 G22230051 G22230192 G22230193 G22230194 G22230195 G22230196 G22230197 G22230198 G22230199 G22230203 G22230205 G22230213 G22230216 G22230217 G22230249 G22230250 G22230253 G22230256 G22230257 G22230287 G22230288 G22230289 G22230290 G22230294 G22230296 G22230297 G22230298 G22230299 G22230300 G22230301 G22230303 G22230304 G22230306 G22230316 G22230317 G22230318 G22230319 G22230320 G22230321 G22230325 G22230326 G22230328 G22230332

Descrizione

Description

Benennung

Descripcion

DISCO 20F D.1,1 SP-MT DISCO 104F D.2,0 SP-MT DISCO 60F D.4,5 SP-MT DISCO 72F D.4,25 SP-MT DISCO 26F D.1,0 SP-MT DISCO 72F D.2,5 SP-MT DISCO 104F D.1,1 SP-MT DISCO 26F D.4,0 SP-MT DISCO 36F D.1,7 SP-MT DISCO 6F D.4,5 SP-MT DISCO 6F D.3,0 SP-MT DISCO 20F D.5,5 SP-MT DISCO 20F D.4,5 SP-MT DISCO 26F D.5,5 SP-MT DISCO 26F D.4,5 SP-MT DISCO 36F D.2,1 SP-MT DISCO 20F D.3,5 SP-MT DISCO 72F D.1,1 SP-MT DISCO 72F D.0,5 SP-MT DISCO 72F D.0,8 SP-MT DISCO 36F D.1,5 SP-MT DISCO 36F D.3,5 SP-MT DISCO 72F D.3,5 SP-MT DISCO 36F D.4,5 SP-MT DISCO 20F D.2,5 SP-MT DISCO 20F D.7,0 SP-MT DISCO 72F D.2,1 SP-MT DISCO 144F D.1,1 SP-MT DISCO 36F D.5,5 SP-MT DISCO 26F D.3,5 SP-MT DISCO 144F D.2,1 SP-MT DISCO 26F D.1,5 SP-MT DISCO 72F D.4,5 SP-MT DISCO 72F D.1,5 SP-MT DISCO 144F D.1,5 SP-MT DISCO 52F D.4,25 SP-MT DISCO 26F D.2,5 SP-MT DISCO 36F D.2,5 SP-MT DISCO 20F D.2,1 SP-MT DISCO 26F D.2,1 SP-MT DISCO 144F D.0,8 SP-MT DISCO 20F D.0,8 SP-MT DISCO 52F D.2,5 SP-MT DISCO POST.10G-3F D.2,1 SP-MT DISCO 144F D.0,5 SP-MT DISCO 26F D.5,0 SP-MT DISCO 36F D.7,0 SP-MT DISCO 12F D.2,1 SP-MT DISCO 52F D.3,5 SP-MT DISCO 36F D.1,1 SP-MT DISCO 10F D.1,5 SP-MT DISCO 20F D.1,0 SP-MT DISCO 20F D.1,5 SP-MT DISCO 52F D.1,5 SP-MT DISCO 160F D.1,5 SP-MT DISCO 180F D.1,5 SP-MT DISCO 52F D.2,1 SP-MT DISCO 13F D.3,5 SP-MT

DISK 20 HOLES D.1-1 SP LM DISK 104 HOLES D.2,00 SP DISK 60 HOLES D.4-5 SP LM DISK 72 HOLES D.4-25 SP LM STEEL DISK 26 HOLES D 1.0 SP DISK ST. 72 H. D 2,5 STEEL DISC 104 HOLES D 1.1 SP DISC 26 F. D.4 DISK 36 HOLES D.1.7 SP LM DISK 6 HOLES D.4,5 DISK 6 HOLES D.3,0 DISK 20 H. D.5-5 CORN SP LM DISK 20 H. D.4-5 SUNF..SP LM DISK 26 H. D.5-5 CORN SP LM DISK 26 H. D.4-5 CORN SP LM DISK 36 H. D.2-1 BEET.SP LM DISK 20 HOLES D.3-5 SP LM DISK 72 HOLES D.1-1 SP LM DISK 72 HOLES D.0-5 SP LM DISK 72 HOLES D.0-8 SP LM DISK 36 HOLES D.1-5 SP LM DISK 36 HOLES D.3-5 SP LM DISK 72 HOLES D.3-5 SP LM DISK 36 HOLES D.4-5 SP LM DISK 20 HOLES D.2-5 SP LM DISK 20 H. D.7-0 PEAN..SP LM DISK 72 HOLES D.2-1 SP LM DISK 144 HOLES D.1-1 SP LM DISK 36 HOLES D.5-5 SP LM DISK 26 HOLES D 3-5 SP LM DISK 144 HOLES D.2-1 SP LM DISK 26 HOLES D.1-5 SP LM DISK 72 HOLES D.4-5 SP LM DISK 72 HOLES D.1-5 SP LM DISK 144 HOLES D.1-5 SP LM DISK 52 HOLES D.4-25 SP LM DISK 26 HOLES D.2-5 SP LM DISK 36 HOLES D.2-5 SP LM DISK 20 HOLES D.2-1 SP LM DISK 26 HOLES D.2-1 SP LM DISK 144 HOLES D.0-8 SP LM DISK 20 HOLES D.0-8 SP LM DISK 52 HOLES D.2-5 SP LM DISK POST.10G-3F-D2-1 SP LM DISK 144 HOLES D.0-5 SP LM DISK 26 HOLES D.5-0 SP LM DISK 36 HOLES D.7 LM DISK 12 HOLES D.2-1 SP LM DISC 52 HOLES D.3-5 SP LM DISK 36 HOLES D.1-1 SP LM DISK 10 HOLES D.1-5 SP LM DISK 20 HOLES D.1-0 SP LM DISK 20 HOLES D.1-5 SP LM DISK 52 HOLES D.1-5 SP LM DISK 160 HOLES D.1-5 SP LM DISK 180 HOLES D.1-5 SP LM DISK 2 HOLES D.2-1 SP LM DISK 13 HOLES D.3.5 SP LM

DISQUE 20 TROUS D. 1-1 SP LM DISQUE 104 TROUS D.2,00 SP DISQUE 60 TROUS D. 4-5 SP LM DISQUE 72 TROUS D. 4-25 SP LM DISQUE ACC. 26 TROUS D 1-0 SP DISQUE ACIER 72 TROUS D 2,5 DISQUE ACIER 104 TROUS D 1,1 DISQUE 26 TROUS D.4 DISQUE 36 TROUS D.1,7 SP LM DISQUE 6 TROUS D. 4,5 DISQUE 6 TROUS D. 3,0 DISQUE 20 TROUS D. 5-5 MAIS SP DISQUE 20 TROUS D. 4-5 TOURN. DISQUE 26 TROUS D. 5-5 MAIS SP DISQUE 26 TROUS D. 4-5 MAIS DISQUE 36 TROUS D. 2-1 BETTES DISQUE 20 TROUS D. 3-5 SP LM DISQUE 72 TROUS D. 1-1 SP LM DISQUE 72 TROUS D. 0-5 SP LM DISQUE 72 TROUS D. 0-8 SP LM DISQUE 36 TROUS D. 1-5 SP LM DISQUE 36 TROUS D. 3-5 SP LM DISQUE 72 TROUS D. 3-5 SP LM DISQUE 36 TROUS D. 4-5 SP LM DISQUE 20 TROUS D. 2-5 SP LM DISQUE 20 TROUS D. 7-0 ARACHID DISQUE 72 TROUS D. 2-1 SP LM DISQUE 144 TROUS D. 1-1 SP LM DISQUE 36 TROUS D. 5-5 SP LM DISQUE 26 TROUS D 3-5 SP LM DISQUE 144 TROUS D. 2-1 SP LM DISQUE 26 TROUS D. 1-5 SP LM DISQUE 72 TROUS D. 4-5 SP LM DISQUE 72 TROUS D. 1-5 SP LM DISQUE 144 TROUS D. 1-5 SP LM DISQUE 52 TROUS D. 4-25 SP LM DISQUE 26 TROUS D. 2-5 SP LM DISQUE 36 TROUS D. 2-5 SP LM DISQUE 20 TROUS D. 2-1 SP LM DISQUE 26 TROUS D. 2-1 SP LM DISQUE 144 TROUS D. 0-8 SP LM DISQUE 20 TROUS D. 0-8 SP LM DISQUE 52 TROUS D. 2-5 SP LM DISQUE ARRIERE 10G. 3 TROUS D2 DISQUE 144 TROUS D. 0-5 SP LM DISQUE 26 TROUS D. 5-0 SP LM DISQUE 36 TROUS D. 7 LM DISQUE 12 TROUS D. 2-1 SP LM DISQUE 52 TROUS D. 3-5 SP LM DISQUE 36 TROUS D. 1-1 SP LM DISQUE 10 TROUS D. 1-5 SP LM DISQUE 20 TROUS D. 1-0 SP LM DISQUE 20 TROUS D. 1-5 SP LM DISQUE 52 TROUS D. 1-5 SP LM DISQUE 160 TROUS D. 1-5 SP LM DISQUE 180 TROUS D. 1-5 SP LM DISQUE 52 TROUS D. 2-1 SP LM DISQUE 13 TROUS D.3-5 SP LM

SCHEIBE 20 LTCHER D.1-1 SP LM SCHEIBE 104 LTCHER D.2,00 SP SCHEIBE 60 LTCHER D.4-5 SP LM SCHEIBE 72 LTCHER D.4-25 SP SCHEIBE ZUB. 26 LTCHER D 1-0 S STAHLSCHEIBE 72 L. D 2,5 STAHLSCHEIBE 104 BOHR. D 1,1 SCHEIBE 26 B. D.4 SCHEIBE 36 LTCHER D.1,7 SP LM SCHEIBE 6 LTCHER D.4,5 SCHEIBE 6 LTCHER D.3,0 SCHEIBE 20 L. D.5-5 MAIS SP LM SCHEIBE 20 L. D.4-5 SONNENBLU. SCHEIBE 26 L. D.5-5 MAIS SP LM SCHEIBE 26 L. D.4-5 MAIS SCHEIBE 36 L.R. D.2-1 RsBEN SP SCHEIBE 20 LTCHER D.3-5 SP LM SCHEIBE 72 LTCHER D.1-1 SP LM SCHEIBE 72 LTCHER D.0-5 SP LM SCHEIBE 72 LTCHER D.0-8 SP LM SCHEIBE 36 LTCHER D.1-5 SP LM SCHEIBE 36 LTCHER D.3-5 SP LM SCHEIBE 72 LTCHER D.3-5 SP LM SCHEIBE 36 LTCHER D.4-5 SP LM SCHEIBE 20 LÖCHER D.2-5 SP LM SCHEIBE 20 L. D.7-0 ERDNUSS SP SCHEIBE 72 LTCHER D.2-1 SP LM SCHEIBE 144 LTCHER D.1-1 SP LM SCHEIBE 36 LTCHER D.5-5 SP LM SCHEIBE 26 LTCHER D 3-5 SP LM SCHEIBE 144 LTCHER D.2-1 SP LM SCHEIBE 26 LTCHER D.1-5 SP LM SCHEIBE 72 LTCHER D.4-5 SP LM SCHEIBE 72 LTCHER D.1-5 SP LM SCHEIBE 144 LTCHER D.1-5 SP LM SCHEIBE 52 LTCHER D.4-25 SP LM SCHEIBE 26 LTCHER D.2-5 SP LM SCHEIBE 36 LTCHER D.2-5 SP LM SCHEIBE 20 LTCHER D.2-1 SP LM SCHEIBE 26 LÖCHER D.2-1 SP LM SCHEIBE 144 LTCHER D.0-8 SP LM SCHEIBE 20 LTCHER D.0-8 SP LM SCHEIBE 52 LTCHER D.2-5 SP LM HINTERSCHEIBE 10G-3L-D2-1 SP L SCHEIBE 144 LTCHER D.0-5 SP LM SCHEIBE 26 LTCHER D.5-0 SP LM SCHEIBE 36 LTCHER D.7 LM SCHEIBE 12 LTCHER D.2-1 SP LM SCHEIBE 52 LTCHER D.3-5 SP LM SCHEIBE 36 LTCHER D.1-1 SP LM SCHEIBE 10 LTCHER D.1-5 SP LM SCHEIBE 20 LTCHER D.1-0 SP LM SCHEIBE 20 LTCHER D.1-5 SP LM SCHEIBE 52 LTCHER D.1-5 SP LM SCHEIBE 160 LTCHER D.1-5 SP LM SCHEIBE 180 LTCHER D.1-5 SP LM SCHEIBE 52 LTCHER D.2-1 SP LM SCHEIBE 13 LTCHER D.3-5 SP LM

DISCO 20 ORIFICIOS D.1-1 SP LM DISCO 104 ORIFICIOS D.2,00 SP DISCO 60 ORIFICIOS D.4-5 SP LM DISCO 72 ORIFICIOS D.4-5 SP LM DISCO AC. 26 ORIFICIOS D 1-0 S DISCO ACERO 72 ORIF. D 2,5 DISCO ACC.104 AGUJEROS D 1,1 DISCO 26 AGUJEROS Ï 4 DISCO 36 ORIFICIOS D.1,7 SP LM DISCO 6 ORIFICIOS D.4,5 DISCO 6 ORIFICIOS D.3,0 DISCO 20 ORIF. D.5-5 MAZ SP LD DISCO 20 ORIF. D.4-5 GIRA.SP L DISCO 26 ORIF. D.5-5 MAZ SP LD DISCO 26 ORIF. D.4-5 MAIZ SP L DISCO 36 ORIF. D.2-1 REMOLACHA DISCO 20 ORIFICIOS D.3-5 SP LM DISCO 72 ORIFICIOS D.1-1 SP LM DISCO 72 ORIFICIOS D.0-5 SP LM DISCO 72 ORIFICIOS D.0-8 SP LM DISCO 36 ORIFICIOS D.1-5 SP LM DISCO 36 ORIFICIOS D.3-5 SP LM DISCO 72 ORIFICIOS D.3-5 SP LM DISCO 36 ORIFICIOS D.4-5 SP LM DISCO 20 ORIF. D.2-5 SP LM DISCO 20 ORIF. D.7-0 CACAH. SP DISCO 72 ORIFICIOS D.2-1 SP LM DISCO 144 ORIFICIOS D.1-1 SP L DISCO 36 ORIFICIOS D.5-5 SP LM DISCO 26 ORIFICIOS D 3-5 SP LM DISCO 144 ORIFICIOS D.2-1 SP L DISCO 26 ORIFICIOS D.1-5 SP LM DISCO 72 ORIFICIOS D.4-5 SP LM DISCO 72 ORIFICIOS D.1-5 SP LM DISCO 144 ORIFICIOS D.1-5 SP L DISCO 52 ORIFICIOS D.4-25 SP L DISCO 26 ORIFICIOS D.2-5 SP LM DISCO 36 ORIFICIOS D.2-5 SP LM DISCO 20 ORIFICIOS D.2-1 SP LM DISCO 26 ORIFICIOS D.2-1 SP LM DISCO 144 ORIFICIOS D.0-8 SP L DISCO 20 ORIFICIOS D.0-8 SP LM DISCO 52 ORIFICIOS D.2-5 SP LM DISCO TRAS.10G. 3 ORIF. D2-1 S DISCO 144 ORIFICIOS D.0-5 SP L DISCO 26 ORIFICIOS D.5-0 SP LM DISCO 36 ORIFICIOS D.7 LM DISCO 12 ORIFICIOS D.2-1 SP LM DISCO 52 ORIFICIOS D.3-5 SP LM DISCO 36 ORIFICIOS D.1-1 SP LM DISCO 10 ORIFICIOS D.1-5 SP LM DISCO 20 ORIFICIOS D.1-0 SP LM DISCO 20 ORIFICIOS D.1-5 SP LM DISCO 52 ORIFICIOS D.1-5 SP LM DISCO 160 ORIFICIOS D.1-5 SP L DISCO 180 ORIFICIOS D.1-5 SP L DISCO 52 ORIFICIOS D.2-1 SP LM DISCO 13 ORIFICIOS D.3-5 SP

cod. G19531191

TAV. 092 50

7 47 54

46 71

31 59 58 57

3 2

22 13

58 60

12 27

28 27 26 56

32 33

31 63

35 37

40 62

69 70 66

51 61

67 68 70

53 19

52 55

cod. G19531191

TAV. 092

TELAIO ELEMENTO Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55

G17121150 F01020253 G17121530 F01230085 F01020440 F01200232 F01020278 GA5220820 F01200324 GA5221260 GA5221260 G17740010 G17720291 F01020286 G22230063 G19204000 G15420842 G15224900 F01020411 G17722713 F01410100 G18701820 F01210035 F02200164 GA5220012 G17722800 F02050034 G17722510 G22270235 G18803230 F01020112 F02100109 G18903741 F02100126 F05100193 F01020508 F02250684 G18903140 F01220033 G19705280 G19705290 F01200270 F02250066 F02200226 F01020397 F01430023 G17121290 GA5220260 G17121240 GA5221560 G18903780 F01020436 F01420048 F01200244 F01020260

Descrizione

Description

Benennung

Descripcion

PIASTRA ELEMENTO MAGICA MTR VITE M16X2X50 U5737 8.8 BR BOCCOLA SINTERIZ.28X16.25X11 DADO M16X 2 D982 8 ZN VITE M 8X1,25X25 U5739 8.8 ZN DADO M 6X 1 U5588 6.8 ZN VITE M16X2X180 U5737 8.8 BR MOLLA REGOLABILE MTR DADO M16X 2 U5588 8.8 ZN REGOLATORE MOLLA COMPL. MTR REGOLATORE MOLLA COMPL. MTR BILANCIERE REGINA COMPL BILANCIERE VITE M16X2X220 U5737 10.9 ZD ELEMENTO ARTICOLATO SUPP.SPIANATERRA CORTO TAGLIENTE SPIANATERRA VITE M6X1X35 U5739 8.8 ZN PIATTO DX ROS.M16 17X 30X 3 U6592 ZN RONDELLA 16,5 X25 X1,0 ZN DADO M16X 2 U5594 5.8 ZN COPIGLIA 3X 30 U1336 ZN ASSIEME CORPO CENTRALE MTR PERNO 15 X 63 ZN ANELLO E. DE 15X 1 U7435 C70 ASS.VITE TENSIONAMENTO ZN MANIGLIA REGOLAZIONE B4 BOCCOLA 15 X22 X16 ZN VITE M10X1,5X45 U5737 8.8 ZN SPINA E.P. 6X 24 U6873 C70 BR MOLLA FERMO MANIGL.MAGICA>2004 SPINA E.P. 6X 60 U6873 C70 BR CAPPUCCIO 5,95X19,05 GIALLO VITE M12X1,75X25 U5739 8.8 ZN INSERTO FIL.M 6X17,5 ZN T.TOND MOLLA GUIDATUBO DADO M10X 1,5 D980 8 ZN TARGHETTA REG.SX RUOTE PROFOND TARGHETTA REG.DX RUOTE PROFOND DADO M10X 1,5 U5588 6.8 ZN RIVETTO STR. 3X 9 U9200A AL COPIGLIA 5X 25 U1336 ZN VITE M6X1X10 U5739 8.8 ZN ROS.M10 10,5X 18X0,9 U8842J ZN PARALLELO SUP.MAGICA MTR BLOCCO AGGANCIO ELEMENTO PARALLELO INF.MAGICA MTR LEVA SOLLEV.ELEMENTO MTR MOLLA TORSIONE GANCIO SUP. VITE M 8X1,25X 20 U5739 8.8 ZN ROS.M8 8,4X 24X 2 U6593 ZN DADO M 8X1,25 U5588 6.8 ZN VITE M16X2X70 U5737 8.8 ZN

BOLT M16X2X50 SINTERED BUSHING 28X16.25X11 NUT M16X 2 D982 8 ZN BOLT M8X1,25X25 U5739 8.8 ZN NUT 6 UNI 5588 6.8 GALVANIZED BOLT M16X2X180 U5737 8.8 ADJUSTABLE MTR SPRING NUT M16X2 U5588 8.8 ZN ADJUSTABLE MTR SPRING ASS.BLY ADJUSTABLE MTR SPRING ASS.BLY REGINA ROCKER ARM MOUNTED ASSY ROCKER ARM BOLT 16X220 5737 10.9 GALVANIZ ARTICULATED ELEMENT SUPPORT SHORT SOIL BRAKER EDGE SOIL LEVELLER BOLT M6X 1X 35 U5739 8.8 ZN RIGHT PLATE WASHER M16 17X30X3 U6592 ZN WASHER 16,5X25X1,0 ZN NUT M16X 2 U5594 5.8 ZN SPLIT PIN 3X 30 U1336 ZN MAINFRAME MTR ASS.BLY PIN 15 X 63 ZN ELASTIC RING DE 15X 1 ADJUSTING SCREW ASSY ZN ADJUSTMENT HANDLE B4 BUSHING 15 X22 X16 GALVA BOLT M10X1,5X45 U5737 8.8 ZN PIN EL. .6 X24 DIN 1481 HANDLE STOP SPRING MAGICA 2004 PIN E.D. 6X60 U6873 C70 BR CAP BOLT M12X1,75X25 U5739 8.8 ZN CYLINDRICAL NUT M 6X17,5 ZN PIPE GUIDE SUPPORT NUT M10X 1,5 D980 8 ZN PLATE PLATE NUT M10X 1,5 U5588 6.8 ZN POP RIVET 3X9 ALUMINIUM SPLIT PIN 5 X25 1336 GALVAN. BOLT M 6X 1X 10 U5739 8.8 ZN WASHER D10 DIN 6798 D.INT.ZN UPPER ARM PARALLEL MAGICA MTR HOOK BLOCK LOWER PARALLER MAGICA MTR LIFTING LEVER ELEMENT MTR UPPER HOOK TORSION SPRING BOLT M8X1,25X20 U5739 8.8 ZN WASHER M8 8,4X 24X 2 U6593 ZN NUT M8 X1,25 U5588 6.8 ZN BOLT M16X2X70 U5737 8.8 ZN

VIS M16X2X50

SCHRAUBE M16X2X50

TORNILLO M16X2X50

ECROU M16X 2 D982 8 ZN VIS M8X1,25X25 U5739 8.8 ZN ECROU 6 UNI 5588 6.8 ZN VIS M16X2X180 U5737 8.8

MUTTER M16X 2 D982 8 ZN SCHRA. M8X1,25X25 U5739 8.8 ZN MUTTER 6 UNI 5588 6.8 ZN SCHRA. M16X2X180 U5737 8.8

TUERCA M16X 2 D982 8 ZN TORNIL.M8X1,25X25 U5739 8.8 ZN TUERCA 6 UNI 5588 6.8 ZN TORNIL. M16X2X180 U5737 8.8

ECROU M16X2 U5588 8.8 ZN

MUTTER M16X2 U5588 8.8 ZN

TUERCA M16X2 U5588 8.8 ZN

VIS 16X220 5737 10.9 ZN ELEMENT ARTICULE

SCHRAUBE 16X220 5737 10.9 ZN GELENKELEMENT

TORNILLO 16X220 5737 10.9 ZN ELEMENTO ARTICULADO

COUTRE CHASSE-MOTTE NIVELEUSE VIS 6 X35 5739 8.G ZN

SCHNEIDE ERDEBNER SCHRAUBE 6 X35 5739 8.G ZN

FILO DE CORTE NIVELADORA TORNILLO 6X35 5739 8.G ZN

RONDELLE M16 17X30X3 U6592 ZN

SCHEIBE M16 17X30X3 U6592 ZN

ARANDELA M16 17X30X3 U6592 ZN

BAGUE ELASTIQUE DE 15X 1

RING DE 15X 1

ANILLO DE 15X 1

POIGNEE REGLAGE B4 BOITE 15 X22 X16 ZN VIS M 10X45 FICHE EL. 6 X24 DIN 1481 RESSORT ARRET POIG.MAGICA 2004 FICHE E.D. 6X60 U6873 C70 BR BOUCHON VIS M12X1,75X25 U5739 8.8 ZN

EINSTELLGRIFF B4 BsCHSE 15 X22 X16 ZN SCHRAUBE M 10X45 SPANNSTIFT 6 X24 DIN 1481 FEDER GRIFFSPERRE MAGICA 2004 BOLTZEN E.D. 6X60 U6873 C70 BR DECKEL SCHR. M12X1,75X25 U5739 8.8 ZN

MANIJA REGULACIN B4 M CASQUILLO 15 X22 X16 ZN TORNILLO M 10X45 CLAVIJA EL.6 X24 DIN 1481 MUELLE BLOQUEO MAN. MAGICA 04 CLAVIJA E.D. 6X60 U6873 C70 BR CORCHO TORN. M12X1,75X25 U5739 8.8 ZN

RESSORT GUIDE-TUBE ECROU M10X 1,5 D980 8 ZN PLAQUET PLAQUET ECROU M10X 1,5 U5588 6.8 ZN RIVET 3 X 9 ALL GOUPILLE 5 X25 1336 ZN VIS 6X10 5739 8.G ZN RONDELLE D10 DIN 6798 D. INT.

FEDER ROHRFsHRUNG MUTTER M10X 1,5 D980 8 ZN PLATTE PLATTE MUTTER M10X 1,5 U5588 6.8 ZN REISSNIETE 3 X 9 ALU SPLINT 5 X25 1336 ZN SCHRAUBE 6X10 5739 8.G ZN UNT. SCHEIBE D10 DIN 6798 D.IN

MUELLE GUA TUBOS A TUERCA M10X 1,5 D980 8 ZN PLACA PLACA TUERCA M10X 1,5 U5588 6.8 ZN REMACHE DESGAR. 3 X 9 AL PASADOR 5 X25 1336 ZN TORNILLO 6X10 5739 8.G ZN ARANDELA D10 DIN 6798 D.INT.ZN

VIS M8X1,25X20 U5739 8.8 ZN RONDELLE M8 8,4X 24X2 U6593 ZN ECROU M8 X1,25 U5588 6.8 ZN VIS M16X2X70 U5737 8.8 ZN

SCHRA. M8X1,25X20 U5739 8.8 ZN SCHEIBE M8 8,4X 24X 2 U6593 ZN MUTTER M8 X1,25 U5588 6.8 ZN SCHRAUBE M16X2X70 U5737 8.8 ZN

TORN. M8X1,25X20 U5739 8.8 ZN ARANDELA M8 8,4X 24X2 U6593 ZN TUERCA M8 X1,25 U5588 6.8 ZN TORNILLO M16X2X70 U5737 8.8 ZN

cod. G19531191

TAV. 092 50

7 47 54

46 71

31 59 58 57

3 2

22 13

58 60

12 27

28 27 26 56

32 33

31 63

16 36

64 8

40 62

69 70 66

51 61

67 68 70

53 19

52 55

cod. G19531191

TAV. 092

TELAIO ELEMENTO Pos.

Cod.

56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73

G17740020 F01020406 F01220011 G19002700 F01020422 GA5221460 F02100109 G15226550 F02050112 G15226570 F01020521 F01230059 F01410076 G20980082 G18801340 F01200293 F01020510 F02200562

Descrizione

Description

VITE M16 SPECIALE BILANCIERE VITE M6X1X25 U5739 8.8 ZN DADO M 6X 1 D980 8 ZN PROTEZIONE FOTOCELLULA > VITE M6X1X60 U5739 8.8 ZN CONVOGLIATORE SEME MTR SPINA E.P. 6X 24 U6873 C70 BR SPINA ZN ANELLO E. DE 30X 1,5 U7435 C70 VITE REGOLAZIONE M16 X 225 ZN VITE M12X1,75X65 U5739 8.8 ZN DADO M12X1,75 D982 8 ZN ROS.M12 13X 24X2,5 U6592 ZN BOCCOLA 18X7X12,25 BOCCOLA 12,25X16 X14 DADO M12X1,75 U5588 6.8 ZN VITE M12X1,75X30 U5739 8.8 ZN SPINA SICUR. D. 8X70 ZN

SCREW M16 ROCKER ARM SPECIAL BOLT M6X 1X 25 U5739 8.8 ZN NUT M6X1 D980 8 ZN PHOTOCELL PROTECTION BOLT M6X1 X 60 U5739 8.8 ZN SEED CONVEYOR PIN EL. .6 X24 DIN 1481 PIN ZN SEEGER RING 30X 1,5 U7435 C70 ADJUSTING BOLT - GALVANIZED BOLT M12X1.75X65 U5739 8.8 ZN NUT M12X1,75 D982 8 ZN GROWER 12 13X 24X2,5 U659 ZN BUSHING 18X7X12-25 BUSHING 12,25X16 X14 NUT M12X1,75 U5588 6.8 ZN BOLT M 12X30 SNAP PIN D.8X 70 ZN

cod. G19531191

Description

Benennung

Descripcion

VIS M 6X25 ECROU M6X1 D980 8 ZN PROTECT CAPT PHOTOC SP3-MT-MG> VIS M6 X1 X 60 U5739 8.8

SCHRAUBE M 6X25 MUTTER M6X1 D980 8 ZN SCHUTZ PHOTOZELLE SCHRAUBE M6 X1 X 60 U5739 8.

TORNILLO M 6X25 TUERCA M6X1 D980 8 ZN PROTECCIN FOTOCLULA PR TORNIL. M6 X1 X 60 U5739 8.8

FICHE EL. 6 X24 DIN 1481

SPANNSTIFT 6 X24 DIN 1481

CLAVIJA EL.6 X24 DIN 1481

SEEGER E. 30 X 1,5 U7435 C70 VIS RÉGLAGE ZN VIS M 12 X65 5739 8.G ZN ECROU M12X1,75 D982 8 ZN

SEEGERING E. 30X 1,5 U7435 C70 STELLSCHRAUBE ZN SCHRAUBE M 12 X65 5739 8.G ZN MUTTER M12X1,75 D982 8 ZN

ANILLO E. 30 X 1,5 U7435 C70 TORNILLO REGULACIÓN ZN TORNILLO M 12 X65 5739 8.G ZN TUERCA M12X1,75 D982 8 ZN

BOITE 12,25X16 X14 ECROU M12X1,75 U5588 6.8 ZN VIS M 12X30 FICHE EL. D.8X70 ZN

B_CHSE 12,25X16 X14 MUTTER M12X1,75 U5588 6.8 ZN SCHRAUBE M 12X30 SCHERSTIFT D.8X 70 ZN

CASQUILLO 12,25X16 X14 TUERCA M12X1,75 U5588 6.8 ZN TORNILLO M 12X30 CLAVIJA D.8X 70 ZN

TAV. 101

36 - Wheel L. 65 22 - Wheel L. 115

33 30

41 34

6 5

25 26

L.1

43 27

25 21

10 20 18 - L (SX)

L.6

L.1

20 19 - R (DX)

R 32

Wheel L. 115 - 23

49 24

Wheel L. 65 - 31

3 48

39 42

39 38

42 46

38 45

cod. G19531191

TAV. 101

RUOTE DI DI PROFONDITÀ Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

G17722471 G17722492 F04010094 G17722482 F02250521 F02050381 F03011159 G17722811 F01200468 G19203943 F02100106 GA5220050 GA5220310 G15225861 G17722612 F01020472 F01220033 GA5220270 GA5220250 G17722830 F01100011 G17723000 G17723080 G20970100 G20970025 GA5220170 G20970085 F05050022 G18701880 F01020047 GA5220960 F01410124 F01230022 G18904540 F01060040 GA5220970 F06120406 F06120188 F01440086 F01410051 F01200244 F04100150 F01020510 F06120449 F06120410 F06120189 F01020262 GA5221180 F01020436 GA5221160

Descrizione

Description

DISCO ASSOLCATORE D.420 SUPPORTO CUSCINETTO DISCO ZN CUSC.d20 D52 B22,2 3304 LLU BOCCOLA 20 X30 X12,3 RIBATTINO TSC 6 X19,8 A/2 ANELLO E. DI 52X 2 U7437 C70 AN. TENUTA 30X47X7 AS DADO M20X 2,5 SINISTRO ZN. DADO M20X 2,5 U5589 6.8 ZN TAGLIENTE INT.DISCHI SPINA E.P. 6X 20 U6873 C70 BR ASS.RASCHIATERRA VIDIA SX ASS.RASCHIATERRA VIDIA DX PROTEZIONE DISCHI MONT.DISCO ASSOLCATORE VITE M10X1,5X25 U5739 8.8 ZN DADO M10X 1,5 D980 8 ZN BRACCIO RUOTA SX BRACCIO RUOTA DX BOCCOLA ELEM.REGINA SINTERIZ. ING.M 6X1 7663-A 9SMNPB28 ZN RASCHIATERRA DX RASCHIATERRA SX RONDELLA 30X0,5X22 ACC. RONDELLA 25,2X2X16,5 VITE M16X 2X80 SX U5737 8.8 ZN RONDELLA 40X4X13 TAPPO PROTEZIONE D.58 H.16,5 > RONDELLA DI SPINTA VITE M6X1X70 U5737 8.8 ZN RASCHIATERRA SX L.65 ROS.M20 21X 37X 3 U6592 ZN DADO M 6X 1 D982 8 ZN MOLLA TRAZIONE ZN VITE M8X1,25X20 U5732 4.6 ZG RASCHIATERRA DX L.65 RUOTA PROF.TAMB.MTR L115 M COPERTURA RUOTA PROF.L115 M ROS. 23X40X0,5 D988 ST2K60 BR ROS.M8 8,4X 17X1,6 U6592 ZN DADO M 8X1,25 U5588 6.8 ZN CUSC.D16 D40 B39 WPS VITE M12X1,75X30 U5739 8.8 ZN RUOTA PROF.TAMB.MTR L115 I RUOTA PROF.TAMB.MTR L65 M COPERTURA RUOTA PROF.L65 M VITE M16X2X80 U5737 8.8 ZN RASCHIATERRA INT.DX VITE M 8X1,25X 20 U5739 8.8 ZN RASCHIATERRA INT.SX

DISC D.420 BEARING DISK SUPPORT ZN BEAR.D20 D52 B22,2 3304 LLU BUSHING D20X30X12,3 RIVET TSC 6X19,8 A/2 BY PIECE SEEGER RING E. 52X 2 U7437 C70 SEALING RING 30X47X7 NUTS M20X1,5 LEFT GALV.ED NUT 20 5589 6.8 GALVANISED * INTERNAL DISK COULTER ELASTIC PIN 6X20 ASS.SOIL-SCRAPER VIDIA LEFT ASS.SOIL-SCRAPER VIDIA RIGHT DISK PROTECTION RIDGING DISC ASSSEMBLY BOLT 10X25 5739 8.G GALVANIZED NUT M10X 1,5 D980 8 ZN LEFT WHEEL ARM ARM WHEEL RIGHT

cod. G19531191

GREASE NIPPLE M6X1 7663-A ZN RIGHT SOILSCRAPER LEFT SOILSCRAPER WASHER 30X0-5X22 ACC. WASHER 25-2X2X16-5 SCREW M16X2X80LEFT U5737 8.8ZN WASHER 40X4X13 GUARD CAP D.58 H.16,5 > IMPULSE WASHER BOLT M6X 1X70 U5737 8.8 ZN LEFT SOILSCRAPER L.65 WASHER M20 21X37X3 U6592 ZN NORM.SELF-LOCKING NUT 6 GALVAN SPRING TENSION ZN BOLT M8X1,25X20 U5732 4.6 ZN RIGHT SOILSCRAPER L.65 DEPTH GAUGE WHEEL SM.CR.OFFS M WHEEL COVER PROF.L115 M WASHER 23X40X0,5 D988 ST2K60 B WASHER M8 8,4X17X1,6 U6592 ZN NUT M8 X1,25 U5588 6.8 ZN BEARING D16 D40 B39 WPS BOLT M 12X30 DEPTH WHEEL MTR L115 DEPTH GAUGE WHEEL SM.CR.MT L65 TYRE FARMFLEX 400X65 BOLT M16X2X80 U5737 8.8 ZN RIGHT INNER SOILSCRAPER BOLT M8X1,25X20 U5739 8.8 ZN LEFT INNER SOILSCRAPER

Description

Benennung

Descripcion

BOITE PAQUET RIVETS TSC 6X 19,8 A/2 SEEGER E. 52X 2 U7437 C70 BAGUE D'ETANCHEITE 30X47X7

BsCHSE PACKUNG NIETEN TSC 6X19,8 A/2 SEEGERING E. 52X 2 U7437 C70 DICHTUNGSRING 30X47X7

CASQUILLO PAQU.REMACHES TSC 6X 19,8 A/2 ANILLO 52X 2 U7437 C70 ANILLO AISLADOR 30X47X7

ECROU 20 5589 5.8 ZN *

MUTTER 20 5589 6.8 ZN *

TUERCA 20 5589 6.8 ZN

GOUJON 6X 20

BOLZEN 6X 20

ESPINA 6X 20

VIS 10X25 5739 8.G ZN ECROU M10X 1,5 D980 8 ZN

SCHRAUBE 10X25 5739 8.G ZN MUTTER M10X 1,5 D980 8 ZN

TORNILLO 10X25 5739 8.G ZN TUERCA M10X 1,5 D980 8 ZN

GRAISS. A BILLE M6X1 7663A ZN

SCHMIERBUECHE M6X1 7663-A ZN

ENGRAS. DE ESFERAS M6X1 7663-A

RONDELLE 30X0-5X22 ACIER RONDELLE 25-2X2X16-5

UNTERLEGSCHEIBE 30X0-5X22 ACC. UNTERLEGSCHEIBE 25-2X2X16-5

ARANDELA 30X0-5X22 ACC. ARANDELA 25-2X2X16-5

RONDELLE 40X4X13

UNTERLEGSCHEIBE 40X4X13

ARANDELA 40X4X13

RONDELLE VIS 6 X70 5737 8.G ZN

UNTERLEGSCHEIBE SCHRAUBE 6 X70 5737 8.G ZN

ARANDELA TORNILLO 6 X70 5737 8.G ZN

RONDELLE M20 21X37X3 U6592 ZN ECROU AUTOB.NOR.6 ZN

SCHEIBE M20 21X37X3 U6592 ZN SELBSTSP. MUTTER NOR.6 ZN

ARANDELA M20 21X37X3 U6592 ZN TUERCA AUTOB. NOR. 6 ZN

VIS M8X1,25X20 U5732 4.6 ZN

SCHRA. M8X1,25X20 U5732 4.6 ZN

TORN. M8X1,25X20 U5732 4.6 ZN

RONDEL. M8 8,4X17X1,6 U6592 ZN ECROU M8 X1,25 U5588 6.8 ZN

SCHEIBE M8 8,4X17X1,6 U6592 ZN MUTTER M8 X1,25 U5588 6.8 ZN

ARANDELA M8 8,4X17X1,6 U6592ZN TUERCA M8 X1,25 U5588 6.8 ZN

VIS M 12X30

SCHRAUBE M 12X30

TORNILLO M 12X30

COUVERTURE FARMFLEX 400X65 VIS M16X2X80 U5737 8.8 ZN

MANTEL FARMFLEX 400X65 SCHRAUBE M16X2X80 U5737 8.8 ZN

CUBIERTA FARMFLEX 400X65 TORNILLO M16X2X80 U5737 8.8 ZN

VIS M8X1,25X20 U5739 8.8 ZN

SCHRA. M8X1,25X20 U5739 8.8 ZN

TORN. M8X1,25X20 U5739 8.8 ZN

TAV. 112 1” «V» SHAPED RUBBER PRESS WHEEL

12 8

12 2

3 17

2” «V» SHAPED RUBBER PRESS WHEEL

5 15 13

18 21

CAST IRON PRESS WHEEL

14 16 24

25 26

31 29 27

cod. G19531191

TAV. 112

RUOTE DI COMPRESSIONE Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

F01220022 GA5220401 GA5220420 G17722340 G18904560 F01020068 GA5220411 G18803081 F01020174 F01230085 F01020152 F01230059 F01020266 G20980004 G20980014 G20970025 F06120412 F06120181 F04100150 F01440086 F06120474 F06120165 F06120408 G15224790 G15224800 G16242190 F04010156 G15224810 G15423850 F01040091 F01220022

Descrizione

Description

Benennung

Descripcion

DADO M 8X1,25 D980 8 ZN CODINO MANIGLIA CODINO ATTACCO MOLLA ZN. MOLLA VITE M 8X1,25X40 U5737 8.8 ZN BOCCOLA ECCENTRICA BOCCOLA 12,25X20 X85 ZN VITE M12X1,75X120 5737 8.8 ZN DADO M16X 2 D982 8 ZN VITE M12X1,75X 40 5737 8.8 ZN DADO M12X1,75 D982 8 ZN VITE M16X2X120 U5737 8.8 ZN BOCCOLA 10X17,5X25 BOCCOLA 16,5X16,5X25 RONDELLA 25,2X2X16,5 RUOTA GOMMA 1"X12" WPS C ANELLO GOMMA 1"X12" M CUSC.D16 D40 B39 WPS ROS. 23X40X0,5 D988 ST2K60 BR RUOTA GOMMA 2"X13" WPS C COPERTURA 2' X 13' RUOTA GOMMA 2"X13" WPS R RUOTA GHISA POST.COMPL. RUOTA POSTERIORE GS SUPPORTO CUSCINETTO CUSC.d20 D47 B14 6204 2RSH BOCCOLA 20,5X25X3 BOCCOLA RUOTA FERRO VITE M 8X1,25X20 U5931 8.8 ZN DADO M 8X1,25 D980 8 ZN

NUT M8X 1,25 D980 8 ZN TAIL

ECROU M8X 1,25 D980 8 ZN

MUTTER M8X 1,25 D980 8 ZN

TUERCA M8X 1,25 D980 8 ZN

VIS M 8X1,25X40 U5737 8.8 ZN

SCHRA. M8X1,25X40 U5737 8.8 ZN

TORNIL.M8X1,25X40 U5737 8.8 ZN

VIS M12X1,75X120 U5737 8.8 ZN ECROU M16X 2 D982 8 ZN

SCHR.M12X1,75X120 U5737 8.8 ZN MUTTER M16X 2 D982 8 ZN

TORN.M12X1,75X120 U5737 8.8 ZN TUERCA M16X 2 D982 8 ZN

ECROU M12X1,75 D982 8 ZN VIS M16X 2X120 U5737 8.8 ZN BOITE 10X17-5X25 BOITE 16-5X16-5X25 RONDELLE 25-2X2X16-5

MUTTER M12X1,75 D982 8 ZN SCHR.M16X 2X120 U5737 8.8 ZN BsCHSE 10X17-5X25 BsCHSE 16-5X16-5X25 UNTERLEGSCHEIBE 25-2X2X16-5

TUERCA M12X1,75 D982 8 ZN TORN.M16X 2X120 U5737 8.8 ZN CASQUILLO 10X17-5X25 CASQUILLO 16-5X16-5X25 ARANDELA 25-2X2X16-5

COUVERT FARMF ROUE COMPR 1"X12

MANTEL FARMF.R.DRUCK .MT

CUBIERTA FARMF. R. COMPR. MT

ROUE FONTE ARRI+RE COMPL+TE ROUE ARRIERE SUPPORT PALIER

HINTERES GUSSEISENRAD KOMPL. HINTERRAD LAGERBsCHSE

RUEDA FUNDICIËN TRAS.COMPL. RUEDA TRASERO SOPORTE COJINETE

DOUILLE 20,5X25X3 DOUILLE ROUE FER VIS 8 X20 5931 8.G ZN ECROU M8X 1,25 D980 8 ZN

BUCHSE 20,5X25X3 BÜCHSE EISENRAD SCHRAUBE 8 X20 5931 8.G ZN MUTTER M8X 1,25 D980 8 ZN

MANGUITO 20,5X25X3 BUJE RUEDA DE HIERRO TORNILLO 8 X20 5931 8.G ZN TUERCA M8X 1,25 D980 8 ZN

cod. G19531191

SPRING CONNECTION ZN SPRING BOLT M8X1,25X40 U5737 8.8 ZN BUSHING BUSHING D12,25X20X84 ZN SCREW M12X1,75X120 5737 8.8 ZN NUT M16X 2 D982 8 ZN TORN.M12X1,75X 40 U5737 8.8 ZN NUT M12X1,75 D982 8 ZN BOLT M16X 2X120 U5737 8.8 ZN BUSHING 10X17.5X25 BUSHING 16-5X16-5X25 WASHER 25-2X2X16-5 RUBB.WHEEL1'X12'BEARINGK098 RUBBER RING 1X12' BEARING D16 D40 B39 WPS WASHER 23X40X0,5 D988 ST2K60 B RUBBER WHEEL 2"X13" WPS COVER 2' X 13' RUBBER WHEEL 2"X13" WPS COMPL. REAR CAST IRON WHEEL REAR WHEEL BEARING SUPPORT BEARING d20 D47 B14 6204 2RSH BUSH 20.5X25X3 STEEL WHEEL BUSH BOLT 8 X20 5931 8.G ZN NUT M8X 1,25 D980 8 ZN

TAV. 121 8 9

7 14

12 16 17 10

11 9

3 4 6 5 13

cod. G19531191

TAV. 121

COPRISEMI ANTERIORI PER RUOTE A “V” Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

GA5220880 GA5221000 GA5220990 G20980050 F01020077 F01410051 F01230034 F01020118 F01420060 F01220048 G20980022 GA5220890 GA5220900 F02200363 G15224250 F01020512 F01410076 G65337005

Descrizione

Description

SUPPORTO COPRISEME PIATTO REGOLAZ.COMPRESSIONE ASTA FERMO CENTRALE BOCCOLA 15X7X8,5 ZN VITE M 8X1,25X60 U5737 8.8 ZN ROS.M8 8,4X 17X1,6 U6592 ZN DADO M 8X1,25 D982 8 VITE M10X1,5X60 U5737 8.8 ZN ROS.M10 10,5X 30X2,5 U6593 ZN DADO M12X1,75 D980 8 ZN BOCCOLA 18X10,25X7 COPRISEME SX COPRISEME DX COPIGLIA R 3X 62 ZN FERMO MOLLA VITE M12X1,75X35 U5739 8.8 ZN ROS.M12 13X 24X2,5 U6592 ZN MOLLA TRAZ.CAMBIO SV

SEEDCOVER SUPPORT

cod. G19531191

BUSHING 15X7X8-5 ZN BOLT M8X1,25X60 U5737 8.8 ZN WASHER M8 8,4X17X1,6 U6592 ZN SELF LOCK.NUT M8X1,25 D982 8ZN BOLT 10X60 5737 8.G GALVANIZED WASHER 10,5X30 NUT M12X1,75 D980 8 ZN BUSHING 18X10-25X7 LEFT SEED COVER RIGHT SEED COVER SPRING SPLIT PIN 3X 62 ZN SPRING STOP BOLT M12X1,75X35 5739 8.8 ZN WASHER D12 U6592 ZN TRACTION COUPLING SPRING- GEAR

Description

Benennung

Descripcion

BOITE 15X7X8-5 ZN VIS M8X1,25X60 U5737 8.8 ZN RONDEL. M8 8,4X17X1,6 U6592 ZN ECROU AUTOBL.M8X1,25 D982 8 ZN VIS 10X60 5737 8.G ZN RONDELLE 10,5X30 ECROU M12X1,75 D980 8 ZN BOITE 18X10-25X7

BsCHSE 15X7X8-5 ZN SCHRA. M8X1,25X60 U5737 8.8 ZN SCHEIBE M8 8,4X17X1,6 U6592 ZN SELBST.MUTT.M8X1,25 D982 8 ZN SCHRAUBE 10X60 5737 8.G ZN SCHEIBE 10,5X30 SCHEIBE M12X1,75 D980 8 ZN BsCHSE 18X10-25X7

CASQUILLO 15X7X8-5 ZN TORN. M8X1,25X60 U5737 8.8 ZN ARANDELA M8 8,4X17X1,6 U6592ZN TUERCA AUTO. M8X1,25 D982 8 ZN TORNILLO 10X60 5737 8.G ZN ARANDELA 10,5X30 TUERCA M12X1,75 D980 8 ZN CASQUILLO 18X10-25X7

GOUPILLE R 3X62 ARRET RESSORT VIS M12X1,75X35 5739 8.8 ZN RONDELLE D12 U6592 ZN RESSORT TRACT.BOITE DE VITESSE

SPLINT R 3X62 FESTSTELLVORRICHTUNG FEDER SCHR. M12X1,75X35 5739 8.8 ZN SCHEIBE D12 U6592 ZN ZUGFEDER GETRIEBE SV

CHAVETA R 3X62 BLOQUEO MUELLE TORN. M12X1,75X35 5739 8.8 ZN ARANDELA D12 U6592 ZN MUELLE TRAC. CAMBIO SV

TAV. 130

17 4

15 10 12

13 5

7 6

9 10 11

cod. G19531191

RUOTINO PREMISAME INOX Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

G68150017 G17722940 F01030516 G17722600 F01020512 G23440001 F01230059 F01060013 G17722950 F01420036 F01200232 F01230022 G17722970 F01020404 F01200244 F01060040 F01200416

Descrizione DISCO PREMISEME D.300 IX BOCCOLA ZN VITE M10X1,5X 60 U5933 10.9 ZD SUPPORTO VITE M12X1,75X35 U5739 8.8 ZN BOCCOLA PARALLELOGRAMMA DADO M12X1,75 D982 8 ZN VITE M6X1X20 U5732 4.6 ZN RASCHIATERRA RUOTINI IX D300 ROS.M6 6,4X 18X 2 U6593 ZN DADO M 6X 1 U5588 6.8 ZN DADO M 6X 1 D982 8 ZN LAMA ESCLUSIONE RUOTINO ZN VITE M6X1X20 U5739 8.8 ZN DADO M 8X1,25 U5588 6.8 ZN VITE M8X1,25X20 U5732 4.6 ZG DADO M10X 1,5 U5589 6S ZN

cod. G19531191

TAV. 130 Description

Description

Benennung

Descripcion

BUSCHING BOLT 10X60 5933 8.8 GALVANIZ. SUPPORT BOLT M12X1,75X35 5739 8.8 ZN BUSHING- PARALLELOGRAM NUT M12X1,75 D982 8 ZN BOLT 6X20 5732 4.6 GALVANIZED

BOITE VIS 10X60 5933 8.8 ZD

BsCHSE SCHRAUBE 10X60 5933 8.8 ZN

CASQUILLO TORNILLO 10X60 5933 8.8 ZD

VIS M12X1,75X35 5739 8.8 ZN BOITE PARALLELOGRAMME ECROU M12X1,75 D982 8 ZN VIS 6X20 5732 4.6 ZN

SCHR. M12X1,75X35 5739 8.8 ZN BsCHSE PARALLELOGRAMM MUTTER M12X1,75 D982 8 ZN SCHRAUBE 6X20 5732 4.6 ZN

TORN. M12X1,75X35 5739 8.8 ZN CASQUILLO PARALELOGRAMA TUERCA M12X1,75 D982 8 ZN TORNILLO 6X20 5732 4.6 ZN

FLAT WASHER 6-6X 18X2 6593 ZN NUT 6 UNI 5588 6.8 GALVANIZED NORM.SELF-LOCKING NUT 6 GALVAN

ROND. PLATE 6-6X 18X2 6593 ZN ECROU 6 UNI 5588 6.8 ZN ECROU AUTOB.NOR.6 ZN

SCHEIBE 6-6X 18X2 6593 ZN MUTTER 6 UNI 5588 6.8 ZN SELBSTSP. MUTTER NOR.6 ZN

ARAND. PLANA 6-6X 18X2 6593 ZN TUERCA 6 UNI 5588 6.8 ZN TUERCA AUTOB. NOR. 6 ZN

BOLT M 6X 1X20 U5739 8.8 ZN NUT M8 X1,25 U5588 6.8 ZN BOLT M8X1,25X20 U5732 4.6 ZN NUT 10 UNI5589 6.8 GALVANIZED

VIS M 6X20 ECROU M8 X1,25 U5588 6.8 ZN VIS M8X1,25X20 U5732 4.6 ZN ECROU 10 UNI 5589 6.8 ZN

SCHRAUBE M 6X20 MUTTER M8 X1,25 U5588 6.8 ZN SCHRA. M8X1,25X20 U5732 4.6 ZN MUTTER 10 UNI 5589 6.8 ZN

TORNILLO M 6X20 TUERCA M8 X1,25 U5588 6.8 ZN TORN. M8X1,25X20 U5732 4.6 ZN TUERCA 10 UNI 5589 6.8 ZN

TAV. 151 2 7

9 3

6 5

1 11

cod. G19531191

ESCLUSIONE ELETTRICA FILE DI SEMINA Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

G19204060 F02100114 G16033703 G19003471 GA5220520 G16033740 G19204080 GA5220490 G66248057 G17121360 GA5220500 F02100087 G22270454 G17121350

Descrizione

Description

FORCELLA SPINA E.P. 6X 30 U6873 C70 BR DISINNESTO ELETTRICO MBN PATTINO DI SCORRIMENTO LAMIERA FERMO ROTAZIONE ZN DISTANZIALE DISINNESTO ELET.ZN FORCELLA PERNO ZN SPINA DI SICUREZZA SP INNESTO ESCL.ELETT.MAG.-R CROCIERA CARDANICA SPINA E.P. 5X 30 U6873 C70 BR CROCIERA COMPL. SP/S TUBO INNESTO CON FORCELLA

FORK ELASTIC PIN 6X30 ELECTRICAL DISCONNECTION MBN SLIDING SIDE BLOCK

cod. G19531191

TAV. 151 Description

Benennung

Descripcion

GOUJON ELASTIQUE 6X30

SPANNHUELSE 6X30

ESPINA ELASTICA 6X30

UNCOUPLING ELECTRIC SPACER FORK PIN ZN SAFETY PIN SP

ENTRETOISE DEBRAYAGE +LECT.

DISTANZST_CK AUSKUPPLUNG EL.

DISTANCIADOR DESCONEXIN EL.

BROCHE PLASTIC SECURITE CARDAN

SICHERHEITSSTIFT SP

CLAVIJA DE SEGURIDAD SP

PIN EL. 5 X30 DIN 1481 SPIDER SP/S HOSE CONNECTION WITH FORK

FICHE EL. 5 X30 DIN 1481 CROSILLON COMPL CARDAN TRANSM

SPANNSTIFT 5 X30 DIN 1481 GELENKKREUZ KOMPL. SP/S

CLAVIJA EL.5 X30 DIN 1481 CRUCETA COMPL. SP/S

TAV. 160 9 6

2 3

12 4

4 Z25

5 7

Z29 Z32 Z36

Z31 Z34 Z38

Z41

OIL : SAE30

cod. G19531191

TAV. 160

CAMBIO Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12

G68008533 G68008530 G68008509 G68008501 F01040098 F04010167 F04010170 G68008505 G68008500 G68008507 F02100087 F06260041

Descrizione

Description

Benennung

Descripcion

BIELLA > CHIAVETTA > PERNO DI ARRESTO > TAPPO CHIUSURA > VITE M 8X1,25X30 U5931 8.8 BR CUSC.D25 D52 B15 6205 2Z CUSC.D25 D52 B15 6205 2RS EX> PARAOLIO 25-52-5 > TAPPO 3/8 > TAPPO SCARICO OLIO > SPINA E.P. 5X 30 U6873 C70 BR CAMBIO SW2010-R1,87-16V

CONNECTING ROD

BIELLE

PLEUEL

BIELA

BOLT 8 X30 5931 8.G BEARING 6205 2Z BEARING D25 D52 B15 6205 2RS

VIS 8 X30 5931 8.G PALIER 6205 2Z ROULEMENT 6205 2RS

SCHRAUBE 8 X30 5931 8.G LAGER 6205 2Z LAGER 6205 2RS

TORNILLO 8 X30 5931 8.G COJINETE 6205 2Z COJINETE 6205 2RS

PIN EL. 5 X30 DIN 1481

FICHE EL. 5 X30 DIN 1481

SPANNSTIFT 5 X30 DIN 1481

CLAVIJA EL.5 X30 DIN 1481

cod. G19531191

TAV. 171

15 29

16 6 22 39 31

40 10 2

38 27 14 11

24 - L.1200

5 23 11 19

25 22

45 33

2 36

22 19

L.925 - 46

20 - L.300

7 2 14

42 L.2485 - 44

7 36

21 - L.550

14 23

38 27 14 11 2

11 36

41 48

2 26 50 49

cod. G19531191

TAV. 171

TRASMISSIONE ELEMENTI DI SEMINA «MONICA 6 FILE» Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

F01020130 F01020436 F01020445 F01020510 F01030104 F01040061 F01060045 F01060050 F01220011 F01200244 F01220022 F01230048 F01230073 F01410051 F02150036 F02250683 F06220018 G19707721 G22230094 G22270127 G22280071 G22505085 G14830390 G22500145 G15521060 G16630410 G16630790 G17130480 G17131410 G17131430 G17131710 G17132030 G17132040 G17132220 G17132280 G18701650 G18801680 G18801880 G66248218 F06080230 F01020479 F01220033 F02100121 G13732200 G22270162 G17131361 G17131370 G17132300 G17132310 F06080178

Descrizione

Description

Benennung

Descripcion

VITE M10X1,5X90 U5737 8.8 ZN VITE M 8X1,25X 20 U5739 8.8 ZN VITE M8X1,25X30 U5739 8.8 ZN VITE M12X1,75X30 U5739 8.8 ZN VITE M12X1,75X 25 U5933 10.9 VITE M6X1X16 U5931 8.8 ZN VITE M8X1,25X40 U5732 4.6 ZN VITE M8X1,25X55 U5732 4.6 ZN DADO M 6X 1 D980 8 ZN DADO M 8X1,25 U5588 6.8 ZN DADO M 8X1,25 D980 8 ZN DADO M10X 1,5 D982 8 ZN DADO M14X 2 D982 8 ZN ROS.M8 8,4X 17X1,6 U6592 ZN LINGUETTA 6X 6X 20 U6604A INSERTO FIL.M 8X17,5 ZN T.TOND VOLANTINO 3LOBI D.65-M8X15 TABELLA CAMBIO MON.F06260041 BEARING SUPPORT ASSE RUOTA CAMBIO 2F.L.500 SP ASSE RUOTA-CAMBIO L.550 ID FERMO ASSE IN LAMIERA CUSCINETTO FORO QUADRO ASSE SERBATOIO DX TUBO Q.20X1,2X78 ZN PIGNONE Z-23 ZN. INGR.Z8 5/8X3/8 TENDICAT.COMPL INGRANAGGIO Z-18 CARTER SUPPORTO CARTER BOCCOLA Q.16 USCITA CAMBIO ZN CARTER TRASM.SEMINATORI CARTER RINVIO TRASM. SUPPORTO CAMBIO ANT.R22 SUPPORTO TRASM.ANT. RONDELLA FORO QUADRO ZN BOCCOLA 11 X25 X7,5 ZN BOCCOLA 8,25 X15 X13 ZN RONDELLA DISTAN.SPANDI CATENA 5/8 ASA 50 L 46 MAGLIE VITE M10X1,5X35 U5739 8.8 ZN DADO M10X 1,5 D980 8 ZN SPINA E.P. 6X 40 U6873 C70 BR ASSE TRASMISSIONE L.2485 RINFORZO INGR.ASSE DA 20 SP TUBO Q. 20X1,2X 925 IX FERMO DI LAMIERA Q.20 COMPL SUPPORTO TRASM.POST.6F CARTER TRASM.POST. CATENA 5/8 ASA 50 L 70 MAGLIE

BOLT M 10X90 BOLT M8X1,25X20 U5739 8.8 ZN BOLT M 8X30 BOLT M 12X30 BOLT M12X1,75X 25 U5933 10.9 BOLT 6 X16 5931 8.G GALVAN. BOLT 8X40 5732 4.6 GALVANIZED BOLT 8 X55 5732 4.6 GALVANIZED NUT M6X1 D980 8 ZN NUT M8 X1,25 U5588 6.8 ZN NUT M8X 1,25 D980 8 ZN NUT M10X 1,5 D982 8 ZN SELF LOCK. NUT M14X2 D982 8 ZN WASHER M8 8,4X17X1,6 U6592 ZN PARALLEL KEY 6X 6X 20 U6604A CYLINDRICAL NUT 8 TC 40 3-LOBE HANDWHEEL D.65-M8X15 GEAR TABLE MON.F06260041 BEARING SUPPORT WHEEL AXLE - GEARBOX 2-ROW L. GEARBOX WHEEL AXLE L. 550 ID PLATE AXLE STOP SQUARE-HOLED BEARING AXLE- TANK RIGHT SQUARE TUBE 20X1,2X78 PINION Z-23 ZN. GEAR Z8 5/8X3/8 CHAIN GEAR Z-18 CARTER CARTER SUPPORT BUSHING Q.16 TRANSMISSION CASE TRANSMISSION CASE FRONT.GEAR SUPPORT R22 REAR SUPPORT TRANSMISSION WASHER 16,5X30X2,5 ZN BUSHING 11X25X7,5 GALVA BUSHING 8,25 X15 X13 ZN MAN. SPR. SPACER WASHER CHAIN 5/8 ISO 10B 46 MESH BOLT M10X1,5X35 U5739 8.8 ZN NUT M10X 1,5 D980 8 ZN ELASTIC PIN 6X40 TRANSMISSION AXLE L2485 AXLE GEAR REINFORCEMENT 20 SP TUBE Q. 20X1,2X 925 IX BLOCK PLATE Q.20 COMPLETE REAR TRANSMISSION SUPPORT 6R REAR TRANSMISSION CASE CUT-DOWN CHAIN 5/8 ISO 10B 70

VIS M 10X90 VIS M8X1,25X20 U5739 8.8 ZN VIS M 8X30 VIS M 12X30

SCHRAUBE M 10X90 SCHRA. M8X1,25X20 U5739 8.8 ZN SCHRAUBE M 8X30 SCHRAUBE M 12X30

TORNILLO M 10X90 TORN. M8X1,25X20 U5739 8.8 ZN TORNILLO M 8X30 TORNILLO M 12X30

VIS 6 X16 5931 8.G ZN VIS 8X40 5732 4.6 ZN VIS 8 X55 5732 4.6 ZN ECROU M6X1 D980 8 ZN ECROU M8 X1,25 U5588 6.8 ZN ECROU M8X 1,25 D980 8 ZN ECROU M10X 1,5 D982 8 ZN ECROU AUTOBL. M14X2 D982 8 ZN RONDEL. M8 8,4X17X1,6 U6592 ZN LANGUETTE 06X6X20 UNI6604 ECROU CYLINDRIQUE 8 TC 40

SCHRAUBE 6 X16 5931 8.G ZN SCHRAUBE 8X40 5732 4.6 ZN SCHRAUBE 8 X55 5732 4.6 ZN MUTTER M6X1 D980 8 ZN MUTTER M8 X1,25 U5588 6.8 ZN MUTTER M8X 1,25 D980 8 ZN SCHEIBE M10X 1,5 D982 8 ZN SELBSTSP.MUTT. M14X2 D982 8 ZN SCHEIBE M8 8,4X17X1,6 U6592 ZN FEDERKEIL 06X6X20 UNI6604 ZYLINDRISCHE MUTTER 8 TC 40

TORNILLO 6 X16 5931 8.G ZN TORNILLO 8X40 5732 4.6 ZN TORNILLO 8 X55 5732 4.6 ZN TUERCA M6X1 D980 8 ZN TUERCA M8 X1,25 U5588 6.8 ZN TUERCA M8X 1,25 D980 8 ZN TUERCA M10X 1,5 D982 8 ZN TUERCA AUTOBL. M14X2 D982 8 ZN ARANDELA M8 8,4X17X1,6 U6592ZN LENGsETA 06X6X20 UNI6604 TUERCA CILINDRICA 8 TC 40

SUPPORT PALIER AXE ROUE BOITE DE VITESSE AXE ROUE BOITE DE VITESSE ARRET AXE EN TOLE ROULEMENT AL+SAGE CARR+ AXE RESERVOIR DRT.

LAGERBsCHSE GEBTRIEBERADACHSE 2R.L.500 SP RADACHSE-GETRIEBE L.550 ID FESTSTELLVORRICHTUNG BLECHACHS VIERKANTLAGER ACHSE BEHZLTER RECHTS

SOPORTE COJINETE EJE RUEDA CAMBIO 2 FILAS. L.50 EJE RUEDA-CAMBIO L.550 ID BLOQUEO EJE DE CHAPA COJINETE ORIFICIO CUADRADO EJE DEPSITO DER. A

PIGNON Z-23 ZN.

RITZE Z-23 ZN.

PINION Z-23 ZN.

ENGRENAGE Z-18

ZAHNRAD Z-18

ENGRANAJE Z-18

RONDELLE 16,5X30X2,5 ZN BOITE 11X25X7,5 ZN BOITE 8,25 X15 X13 ZN RONDELLE ENTRETOISE EP. ENGRAI

UNTERLEGSCHEIBE 16,5X30X2,5 ZN BsCHSE 11X25X7,5 ZN BsCHSE 8,25 X15 X13 ZN ABSTANDSCHEIBE DsNGERSTREUER

ARANDELA 16,5X30X2,5 ZN CASQUILLO 11X25X7,5 ZN CASQUILLO 8,25 X15 X13 ZN ARANDELA DISTAN.ABONAD.

VIS M10X1,5X35 U5739 8.8 ZN ECROU M10X 1,5 D980 8 ZN GOUJON ELASTIQUE 6X40 AXE TRANSMISSION L.2485 RENFORC. ENGREN. AXE DE 20 SP

SCHR. M10X1,5X35 U5739 8.8 ZN MUTTER M10X 1,5 D980 8 ZN SPANNHUELSE 6X40 sBERTRAGUNGSACHSE L.2485 VERSTZRKUNG ACHSZAHNRAD 20 SP

TORN. M10X1,5X35 U5739 8.8 ZN TUERCA M10X 1,5 D980 8 ZN PASADOR 6X40 EJE TRANSMISIN L 2485 A REFUERZO ENGRAN. EJE DE 20 SP

cod. G19531191

TAV.290 30

24 17

19 7

36 10 27 3 13

34 12

29 11 2 16 7 26 24 17

1 9 6 31 33

97 22 32

15 - L.2000 5

20 34

4 13

10 25 34

7 19

cod. G19531191

TAV. 290

VARIANTI TRASMISSIONE ELEMENTI DI SEMINA «MONICA 7 FILE» Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36

F01020072 F01020432 F01020436 F01020479 F01060045 F01200244 F01220022 F01220033 F01410051 F02050146 F02050615 F02200229 F04010311 G10120941 G22230141 G22250190 G22270162 G22505085 G22500092 G22500091 G16630410 G16630790 G17130360 G17131370 G22250453 G17131970 G17130630 G17132020 G17132230 G17732240 G18801680 G18801880 G66248207 G66248218 F06080178 F06080015

Descrizione

Description

Benennung

Descripcion

VITE M 8X1,25X50 U5737 8.8 ZN VITE M 8X1,25X16 U5739 8.8 ZN VITE M 8X1,25X 20 U5739 8.8 ZN VITE M10X1,5X35 U5739 8.8 ZN VITE M8X1,25X40 U5732 4.6 ZN DADO M 8X1,25 U5588 6.8 ZN DADO M 8X1,25 D980 8 ZN DADO M10X 1,5 D980 8 ZN ROS.M8 8,4X 17X1,6 U6592 ZN ANELLO E. DE 35X 1,5 U7435 C70 ANELLO E. DE 28X 1,5 U7435 C70 COPIGLIA 5X 45 U1336 ZN CUSC.d35 D55 B10 61907 LLU TUBO Q. 20X1,2X 194 ASSE SEMINAT.6F.CM.80 L.2000 PLANTING UNIT AXLE Z-15 RING G RINFORZO INGR.ASSE DA 20 SP FERMO ASSE IN LAMIERA SUPPORTO CUSCINETTO BOCCOLA CUSCINETTO PIGNONE Z-23 ZN. INGR.Z8 5/8X3/8 TENDICAT.COMPL ASSE TRASM.L.844 FERMO DI LAMIERA Q.20 COMPL DISTANZIALE FERMO ASSE SV/2 MOZZO CORONA TRASM.SEMIN.COMPL PIGNONE Z-15 ZN SUPPORTO TRASM.POST.7F TUBO Q.20X1,2X500 INOX RONDELLA 32XQ.20,5X6 ZN BOCCOLA 11 X25 X7,5 ZN BOCCOLA 8,25 X15 X13 ZN TENDICATENA SPAND. SP-520 RONDELLA DISTAN.SPANDI CATENA 5/8 ASA 50 L 70 MAGLIE CATENA 1/2 ISO 083 37 MAGLIE

BOLT M8X1,25X50 U5737 8.8 ZN BOLT M8X 1.25X16 U5739 8.8 ZN BOLT M8X1,25X20 U5739 8.8 ZN BOLT M10X1,5X35 U5739 8.8 ZN BOLT 8X40 5732 4.6 GALVANIZED NUT M8 X1,25 U5588 6.8 ZN NUT M8X 1,25 D980 8 ZN NUT M10X 1,5 D980 8 ZN WASHER M8 8,4X17X1,6 U6592 ZN ELASTIC RING DE 35X 1,5 U7435 STOP RING 28 UNI 7435-75 SPLIT PIN 5X 45 U1336 ZN BEARING d35 D55 B10 61907 L TUBE Q. 20X1,2X 194 AXLE-6-ROW SEEDER MACH.L.2000 PLANTING UNIT AXLE Z-15 RING G AXLE GEAR REINFORCEMENT 20 SP PLATE AXLE STOP BEARING SUPPORT BEARING BUSHING PINION Z-23 ZN. GEAR Z8 5/8X3/8 CHAIN TRANSM. SHAFT L.844 BLOCK PLATE Q.20 COMPLETE AXLE STOP SPACER SV2 HUB CROWN TRASMIS. PINION Z-15 ZN TRANSMISSION SUPPORT SQUARE TUBE 20X1,2X500 INOX WASHER 32XQ.20,5X6 ZN BUSHING 11X25X7,5 GALVA BUSHING 8,25 X15 X13 ZN CHAIN TENSIONER MAN. SPR. SPACER WASHER CUT-DOWN CHAIN 5/8 ISO 10B 70 CHAIN 1/2 ISO 083 37 LINKS

VIS M8X1,25X50 U5737 8.8 ZN VIS M 8X16 VIS M8X1,25X20 U5739 8.8 ZN VIS M10X1,5X35 U5739 8.8 ZN VIS 8X40 5732 4.6 ZN ECROU M8 X1,25 U5588 6.8 ZN ECROU M8X 1,25 D980 8 ZN ECROU M10X 1,5 D980 8 ZN RONDEL. M8 8,4X17X1,6 U6592 ZN BAGUE ELASTIQUE DE 35X 1,5 BAGUE DE SERRAGE 28 UNI 7435-7 GOUPILLE 5X 45 U1336 ZN

SCHR. M8X1,25X50 U5737 8.8 ZN SCHRAUBE M 8X16 SCHRA. M8X1,25X20 U5739 8.8 ZN SCHR. M10X1,5X35 U5739 8.8 ZN SCHRAUBE 8X40 5732 4.6 ZN MUTTER M8 X1,25 U5588 6.8 ZN MUTTER M8X 1,25 D980 8 ZN MUTTER M10X 1,5 D980 8 ZN SCHEIBE M8 8,4X17X1,6 U6592 ZN RING DE 35X 1,5 U7435 C70 DRAHTSPRENGRING 28 UNI 7435-75 SPANNSTIFT 5X 45 U1336 ZN

TORN. M8X1,25X50 U5737 8.8 ZN TORNILLO M 8X16 TORN. M8X1,25X20 U5739 8.8 ZN TORN. M10X1,5X35 U5739 8.8 ZN TORNILLO 8X40 5732 4.6 ZN TUERCA M8 X1,25 U5588 6.8 ZN TUERCA M8X 1,25 D980 8 ZN TUERCA M10X 1,5 D980 8 ZN ARANDELA M8 8,4X17X1,6 U6592ZN ANILLO DE 35X 1,5 U7435 C70 ANILLO PARADA 28 UNI 7435-75 PASADOR 5X 45 U1336 ZN

AXE SEMEUR 6 RANGEES CM. 80 L. COURONNE AXE SEMEUR Z-15 SV RENFORC. ENGREN. AXE DE 20 SP ARRET AXE EN TOLE SUPPORT PALIER BOITE PALIER PIGNON Z-23 ZN.

ACHSE SZAELEMENT 6 R.CM.80 L.2 KRANZ SZELEMENTACHSE Z-15 SV VERSTZRKUNG ACHSZAHNRAD 20 SP FESTSTELLVORRICHTUNG BLECHACHS LAGERBsCHSE LAGERBsCHSE RITZE Z-23 ZN.

EJE SEMBR. 6 FILAS. CM.80 L.20 CORONA EJE SEMBR. Z-15 SV REFUERZO ENGRAN. EJE DE 20 SP BLOQUEO EJE DE CHAPA SOPORTE COJINETE CASQUILLO COJINETE PINION Z-23 ZN.

AXE TRANSMISSION L.844

ACHSE ANTRIEB.L.844

EJE TRANSM.L.844

ENTRETOISE ARRET AXE SV/2

DISTANZSTsCK ACHSANSCHLAG SV/2

DISTANCIADOR BLOQUEO EJE SV/2

BOITE 11X25X7,5 ZN BOITE 8,25 X15 X13 ZN TENDEUR DE CHAINE EPAND. ENGR. RONDELLE ENTRETOISE EP. ENGRAI

BsCHSE 11X25X7,5 ZN BsCHSE 8,25 X15 X13 ZN KETTENSPANNER DsNGERSTR. SP-52 ABSTANDSCHEIBE DsNGERSTREUER

CASQUILLO 11X25X7,5 ZN CASQUILLO 8,25 X15 X13 ZN TENSOR DE CADENA ABON. SP-520 ARANDELA DISTAN.ABONAD.

cod. G19531191

TAV. 182 36 32

2 7

8 9

2 1

11 12

38 26

13 39

27 28 30

15 16 17

18 5

18 20 19

20 7 2

3 1 23

20 33

cod. G19531191

TAV. 182

RUOTE DI TRASMISSIONE Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41

F01220022 G22230094 G14830390 F01020440 G18701620 G15110091 G16630400 G16630370 F01020432 F06220018 F01420049 F02250683 G17132050 G17132130 F01040067 G17130140 F01200232 F01200244 G15231570 F01020436 F01020452 G18902970 G17131311 F06080259 F01020445 G17131132 F04010178 F04010170 F02100121 G16010080 F01250046 F06120414 F06120415 F06120422 G20970142 F06120421 G17132120 F01020233 G17131580 F05050025 F01200306

Descrizione

Description

Benennung

Descripcion

DADO M 8X1,25 D980 8 ZN BEARING SUPPORT CUSCINETTO FORO QUADRO VITE M 8X1,25X25 U5739 8.8 ZN RONDELLA 16,5 X35 X3 QU.ZN SCONTRO A U SP.8 2F15 165 PIGNONE Z-16 ZN. INGRANAGGIO R.LIB. Z-23 CSK25 VITE M 8X1,25X16 U5739 8.8 ZN VOLANTINO 3LOBI D.65-M8X15 ROS.M8 8,4X 32X 2 U6593 ZN INSERTO FIL.M 8X17,5 ZN T.TOND SUPPORTO RUOTA R22 DX CARTER RUOTE R22 VITE M6X1X45 U5931 8.8 ZN LEVA CAMBIO ZN DADO M 6X 1 U5588 6.8 ZN DADO M 8X1,25 U5588 6.8 ZN RULLO TENDICATENA STRETTO VITE M 8X1,25X 20 U5739 8.8 ZN VITE M 8X1,25X50 U5739 8.8 ZN MOLLA TRAZ.CAMBIO ZN SP PIASTRA CATENA 5/8 ASA 50 L 73 MAGLIE VITE M8X1,25X30 U5739 8.8 ZN ASSE RUOTA 20X8,00-10 CUSC.D35 D72 B17 6207 2RS1 EX> CUSC.D25 D52 B15 6205 2RS EX> SPINA E.P. 6X 40 U6873 C70 BR BOCCOLA 25X40X13 ZN DADO COLON. 16X1,5 ZN RUOTA 22X11.00-10 DX 6PR TL > RUOTA 22X11.00-10 SX 6PR TL > CERCHIO 8.00-10 RONDELLA 32X4X15,5 COPERTURA 22X11.00-10 K472 TL SUPPORTO RUOTA R22 SX VITE M14X2X200 U5737 8.8 BR BOCCOLA DI APPOGGIO ZN CAPPELLOTTO PROTEZ. X VALV.PVC DADO M14X 2 U5588 6.8 ZN

NUT M8X 1,25 D980 8 ZN BEARING SUPPORT SQUARE-HOLED BEARING BOLT M8X1,25X25 U5739 8.8 ZN WASHER 16.5 X 35 X 3- GALVAN. STRIKER PINION Z-16 ZN. FREE WHEEL GEAR Z-23 CSK25 BOLT M8X 1.25X16 U5739 8.8 ZN 3-LOBE HANDWHEEL D.65-M8X15 WASHER M8 8,4X32X2 U6593 ZN CYLINDRICAL NUT 8 TC 40 RIGHT WHEEL SUPPORT R22 WHEEL COVER R22 BOLT M6X 1X 45 U5931 8.8 ZN GEAR LEVER NUT 6 UNI 5588 6.8 GALVANIZED NUT M8 X1,25 U5588 6.8 ZN CHAIN TIGHTENER NARROW ROLLER BOLT M8X1,25X20 U5739 8.8 ZN BOLT M8X1,25X50 U5739 8.8 ZN GALVAN. GEAR TRACT. SPRING SP PLATE CHAIN 5/8 ASA 50L 73 LINKS BOLT M 8X30 WHEEL AXLE 20X8,00-10 BEAR.D35 D72 B17 6207 2RS1 EX BEARING D25 D52 B15 6205 2RS ELASTIC PIN 6X40 BUSHING 25X40X13 ZN NUT STUD M16X 1.5 ZN R.WHEEL 22X11.00-10 6PR TL L.WHEEL 22X11.00-10 6PR TL WHEEL 8.00-10 WASHER 32X4X15-5 COVER 22X11.00-10 K472 TL LEFT WHEEL SUPPORT R22 BOLT M14X 2X200 U5737 8.8 ZB SUPPORT BUSHING GALV.ED PROTECTION CAP PVC X VALVA NUT M14X2

ECROU M8X 1,25 D980 8 ZN SUPPORT PALIER ROULEMENT AL+SAGE CARR+ VIS M8X1,25X25 U5739 8.8 ZN RONDELLE 16-5 X35 X3 QU.ZN BRIDE 150 MM PIGNON Z-16 ZN. ENGRENAGE Z23 ROUE LIBRE CSK25 VIS M 8X16

MUTTER M8X 1,25 D980 8 ZN LAGERBsCHSE VIERKANTLAGER SCHRA. M8X1,25X25 U5739 8.8 ZN UNTERLEGSCHEIBE 16-5 X35 X3 Q ANSCHLAG RITZE Z-16 ZN. ZAHNRAD FREILAUF Z-23 CSK25 SCHRAUBE M 8X16

TUERCA M8X 1,25 D980 8 ZN SOPORTE COJINETE COJINETE ORIFICIO CUADRADO TORNIL.M8X1,25X25 U5739 8.8 ZN ARANDELA 16-5 X35 X3 QU.ZN ELEMENTO DE EMPALME PINION Z-16 ZN. ENGRANAJE R.LIBRE Z-23 CSK25 TORNILLO M 8X16

RONDELLA M8 8,4X32X2 U6593 ZN ECROU CYLINDRIQUE 8 TC 40

SCHEIBE M8 8,4X32X2 U6593 ZN ZYLINDRISCHE MUTTER 8 TC 40

ARANDELA M8 8,4X32X2 U6593 ZN TUERCA CILINDRICA 8 TC 40

VIS M 6X45 LEVIER BOITE DE VITESSE ECROU 6 UNI 5588 6.8 ZN ECROU M8 X1,25 U5588 6.8 ZN ROULEAU TENDEUR ETROITE DE CHA VIS M8X1,25X20 U5739 8.8 ZN VIS M8X1,25X50 U5739 8.8 ZN RESS. TRACT. BOITE VITESSE ZN

SCHRAUBE M 6X45 GETRIEBE HEBEL MUTTER 6 UNI 5588 6.8 ZN MUTTER M8 X1,25 U5588 6.8 ZN ROLLE ENGES KETTENSPANNER SCHRA. M8X1,25X20 U5739 8.8 ZN SCHRA. M8X1,25X50 U5739 8.8 ZN ZUGFEDER GETRIEBE ZN SP

TORNILLO M 6X45 PALANCA DE CAMBIO TUERCA 6 UNI 5588 6.8 ZN TUERCA M8 X1,25 U5588 6.8 ZN RODILLO TENSOR DE LA CADENA AN TORN. M8X1,25X20 U5739 8.8 ZN TORN. M8X1,25X50 U5739 8.8 ZN MUELLE TRAC. CAMBIO ZN SP

VIS M 8X30 AXE ROUE 20X8,00-10 ROULEM. D35 D72 B17 6207 2RS1 ROULEMENT 6205 2RS GOUJON ELASTIQUE 6X40 BOITE 25X40X13 ZN ECROU M16X1,5 COLONNETTE ZN

SCHRAUBE M 8X30 RADACHSE 20X8,00-10 LAGER D35 D72 B17 6207 2RS1 LAGER 6205 2RS SPANNHUELSE 6X40 BÜCHSE 25X40X13 ZN SCHRAUBBOLZENMUTTER M16X1,5 ZN

TORNILLO M 8X30 EJE RUEDA 20X8,00-10 COJINETE D35 D72 6207 2RS1 COJINETE 6205 2RS PASADOR 6X40 CASQUILLO 25X40X13 ZN TUERCA M16X1,5 COLUMNA ZN

RONDELLE 32X4X15-5

UNTERLEGSCHEIBE 32X4X15-5

ARANDELA 32X4X15-5

VIS M14X2X 200 U5737 8.8 ZB

SCHRAUBE M14X 2X200 U5737 8.8

TORNILLO M14X2X200 5737 8.8 ZB

CAPUCHON PROTECION PVC X VALVA ECROU M14X2

SCHUTZKAPPE PVC X VENTIL MUTTER M14X2

TAPA PROTECION PVC X VALVA DADO M14X2

cod. G19531191

TAV. 191

15 13

8 9 16 4

22 16

10 8

14 15

18 7

3 22

8 3

24 12

2 20

12 11

cod. G19531191

TAV. 191

SUPPORTI SERBATOIO SPANDICONCIME UNICO Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

G17171160 G17171001 F20110714 F20120349 G22220141 G17175521 G17175531 G20890017 G17171151 F01200271 F01020236 F01200306 F01020145 F01230047 F01420059 F20110706 F01020463 F01200270 F20120346 G17176890 G17176880 G13910250 F01020233 G17176900

Descrizione

Description

TUBO Q. 50X 5X2410 ASS.SUPPORTO POSTERIORE CAV.Q.B=50 M=10X1,5 L=72 PUNTALE Q.50 ALETT.POLIT.NERO BRACCIO SCORREVOLE 4 FILE PIASTRA SUPP. MICRO SX PIASTRA SUPP. MICRO DX SCONTRO PIASTRA DADO M10X 1,5 U5588 A2 IX VITE M14X2X220 U5737 8.8 BR DADO M14X 2 U5588 6.8 ZN VITE M10X1,5X 90 U5737 A2 IX DADO M10X 1,5 D982 A2 IX ROS.M10 10,5X 30X2,5 U6593 IX CAV.Q.B=35 M=10X1,5 L=60 VITE M10X1,5 X25 U5739 A2 IX DADO M10X 1,5 U5588 6.8 ZN PUNTALE Q 35 ALETT.POLIT.NERO SUPPORTO BARRA MICRO DX R22 SUPPORTO BARRA MICRO SX R22 TUBO Q. 35X 4X 685 VITE M14X2X200 U5737 8.8 BR SUPPORTO MICRO CENTR.R22

TUBE Q. 50X 5X2410 REAR SUPPORT U BOLT Q.B=50 M=10X1,5 L=72 CAP SLIDING ARM- 4-ROW LEFT SUPPORT PLATE MICRO RIGHT SUPPORT PLATE MICRO STRIKER PLATE PLATE NUT 10 5588 6.8 INOX BOLT M14X2X220 U5737 8.8 BR NUT M14X2 BOLT M10X1.5X 90 U5737 A2 IX NUT M10X 1,5 D982 A2 IX WASHER 11X30X2,5 6593 A2 U BOLT Q.B=35 M=10X1,5 L=60 BOLT 10X25 5739 INOX A2 NUT M10X 1,5 U5588 6.8 ZN SQ.TIP 35 BLACK BAR MICRO SUPP.RIGHT R22 BAR MICRO SUPP.LEFT R22 TUBE Q. 35X 4X 685 BOLT M14X 2X200 U5737 8.8 ZB CENTRAL MICR.SUPPORT

cod. G19531191

Description

Benennung

Descripcion

BOUCHON BRAS GLISSANT 4 RANGEES

DECKEL GLEITARM 4 REIHEN

CORCHO BRAZO CORREDIZO 4 FILAS

BUTEE

ANSCHLAG

ELEMENTO DE EMPALME

ECROU 10 5588 6.8 INOX VIS M14X2X220 U5737 8.8 BR ECROU M14X2 VIS M10X1.5X 90 U5737 A2 IX ECROU M10X 1,5 D982 A2 IX RONDELLE 11X30X2,5 6593 A2 CAVALIER SUPPORT DISQUE SV VIS 10X25 5739 INOX A2 ECROU M10X 1,5 U5588 6.8 ZN

MUTTER 10 5588 6.8 INOX SCHRAUBE M14X2X220 U5737 8.8 MUTTER M14X2 SCHRAUBE M10X1.5X90 5737 A2 IX MUTTER M10X 1,5 D982 A2 IX UNTERLEGSCHEIBE 11X30X2,5 6593 VERBINDUNG SCHEIBENHALTERUNG S SCHRAUBE 10X25 5739 INOX A2 MUTTER M10X 1,5 U5588 6.8 ZN

TUERCA 10 5588 6.8 INOX TORNILLO M14X2X220 U5737 8.8 DADO M14X2 TORNILLO M10X1.5X90 5737 A2 IX TUERCA M10X 1,5 D982 A2 IX ARANDELA 11X30X2,5 6593 A2 PERNO EN U SOP. DISCO SV TORNILLO 10X25 5739 INOX A2 TUERCA M10X 1,5 U5588 6.8 ZN

VIS M14X2X 200 U5737 8.8 ZB

SCHRAUBE M14X 2X200 U5737 8.8

TORNILLO M14X2X200 5737 8.8 ZB

TAV. 201 41

57 42

65 60

65 66 68

61 3 20

21 47

44 5

58 67 59 68

16 14

32 52

53 56

34 53

52 10

26 24 8 41

44 28

TAV. 210

29 56 35

22 40

53 36

44 50

31 23 52 30 32

33 25

cod. G19531191

TAV. 201

SERBATOIO SPANDICONCIME UNICO Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70

G17171043 G17171033 G15274120 G15273540 G15273560 G15274100 G15274150 G17176410 G15274080 G15273700 G15274061 G19003660 G16670180 G66248184 G66248187 G66248224 G65336089 G65336080 F03011155 G16021080 G68005092 G22505085 G15471930 G17170270 G20860086 G20860088 F06080196 G22230094 G14830390 G66248207 F03011081 G66248121 G66248218 G65338043 G18701650 G22220073 G13732200 G66248223 F02100114 F01070074 F01240012 F05150112 F01020426 F01200245 F01020462 F01200271 F01020463 F01020434 G20970140 F01410034 F01020043 F01200233 F01020419 F01020068 F01020398 G20970125 F01420039 G17171131 G15273632 G15274090 G13722250 F02250123 G18902270 G66248098 F01020457 F01420049 F01060040 F01260043 F05150472 F06080487

Descrizione

Description

SERBATOIO SX 250 INOX SERBATOIO DX 250 INOX TELO COPRISERBATOIO BB LAMIERA APPOGGIO GRIGLIA TIRANTE INTERNO TUBO TELO COPRISERBATOIO GRIGLIA SERBATOIO PORTA DI PULIZIA BBX IX ASSE AGITAT.S.UNICO 250 COMPL SUPPORTO COCLEA TEGOLO 250 SUPPORTO INGRANAGGIO Z.15-DISTANZ.COMPL CHIUSURA USCITA SERB.SPAND.SP SCARICO SERB.SPAND.TIPO MICRO FERMO DISTRIBUTORE SPAND. MOLLA SPEC.TENUTA FERMO SPAND. MOLLA SPEC.SCARICO SPAND.T.M. GUARNIZIONE VETRO TRAMOGGIA VETRO CONTROLLO LIVELLO SEMI TENDITORE GUARNIZIONE FERMO ASSE IN LAMIERA PROTEZIONE PROTEZIONE RINVIO SERBATOIO INGRANAGGIO 1/2 Z-12 F.Q. INGRANAGGIO 1/2 Z-12 F.T. CATENA 1/2 ISO 083 32 MAGLIE BEARING SUPPORT CUSCINETTO FORO QUADRO TENDICATENA SPAND. SP-520 GUARNIZIONI LABBRO DE100 BOCCOLA CON FLANGIA M80 RONDELLA DISTAN.SPANDI MOLLA COMP.ZN SERB. M80 RONDELLA FORO QUADRO ZN RONDELLA 28X0,3X16,5 ASSE TRASMISSIONE L.2485 TAPPO SUPP.SPAND.D.11 SPINA E.P. 6X 30 U6873 C70 BR VITE M4,2X1,41X25 U6954 4.8NI DADO M 6X 1 U5448 5.8 ZN MANIGLIA INTERAS. 117 FORO 8MM VITE M 8X1,25X12 U5739 A2 IX DADO M 8X1,25 U5588 A2 IX VITE M10X1,5 X20 U5739 A2 IX DADO M10X 1,5 U5588 A2 IX VITE M10X1,5 X25 U5739 A2 IX VITE M 8X1,25X16 U5739 A2 IX RONDELLA 20X2X8,5 ROS.M6 6,4X12,5X1,6 U6592 IX VITE M6X1X60 U5737 8.8 ZN DADO M 6X 1 U5588 A2 IX VITE M 6X1 X 16 U5739 A2 IX VITE M 8X1,25X40 U5737 8.8 ZN VITE M6X1X12 U5739 8.8 ZN RONDELLA 28X2,5X6,5 ROS.M6 6,4X 24X 2 U6593 IX LAMIERA CENTRALE IX SUPPORTO TELO COPRISERBATOIO ASTA FISSAGGIO TELO TUBO RINFORZO TELO TRAMOGGIA RIVETTO STR. 4,8X 9 U9200A AL GUIDATUBO ZN TEL TAPPO CONVOGLIATORE DEPR. SP VITE M8 X1,25X20 U5739 A2 IX ROS.M8 8,4X 32X 2 U6593 ZN VITE M8X1,25X20 U5732 4.6 ZG DADO FLANG.M8 D6923 8.8 ZN PUNTALE A CAMPANA PVC NERO D10 CATENA AGGANCIO TELO IN GOMMA

LEFT TANK 250 INOX RIGHT TANK 250 INOX HOPPER COVER-SHEET BB GRID SUPPORT BRACKET INNER TIE ROD HOPPER COVER-SHEET TUBE TANK GRID. CLEANING DOOR BBX INOX STIRRER SPINDLE BB250 TANK BOLT SUPPORT BENT TILE 250 SUPPORT COMPLETE GEAR Z.15-SPACER OUTLET CLOSURE- MAN.SPREAD. TA MICRO TYPE MAN.SPR.TANK DISCH. FERT. SPR. DISTRIB. STOP SPEC.SPRING- BLOCK. MAN. SPR. SPEC. SPRING SPREDER RELIEF GLASS SEAL SEED LEVEL CHECKING GLASS TURNBUCKLE GASKET PLATE AXLE STOP GUARD INTERNAL TRANSMISS. TANK PROTE GEAR 1/2 Z-12 F.Q. GEAR 1/2 Z-12 F.T. CUT-DOWN CHAIN .1/2 ISO 083 32 BEARING SUPPORT SQUARE-HOLED BEARING CHAIN TENSIONER LIP GASKET D100 BUSHING W/ FLANGE M80 MAN. SPR. SPACER WASHER ZN TANK COMP.SPRING M80 WASHER 16,5X30X2,5 ZN WASHER 28X0-3X16-5 TRANSMISSION AXLE L2485 PLUG MAN. SPR. SUPP. D.11 ELASTIC PIN 6X30 BOLT 4-2X25 DIN 7981 NUT 6 UNI 5448 5.8 ZN HANDLE BOLT M8 X1,25X 12 U5739 8.8 IX NUT M 8X1,25 U5588 6.8 IX BOLT M10X1,5 X 20 U5739 8.8 IX NUT 10 5588 6.8 INOX BOLT 10X25 5739 INOX A2 BOLT M 8X1,25X 16 U5739 8.8 IX WASHER 20X2X8,5 WASHER M6 6,4X12,5X1,6 U6592 SCREW M6X1X60 U5737 8.8 ZN NUT M 6X 1 U5588 IX BOLT M6 X1 X 16 U5739 8.8 IX BOLT M8X1,25X40 U5737 8.8 ZN BOLT M6X1X12 U5739 8.8 ZN WASHER 28X2-5X6-5 WASHER M6 6,4X24X2 U6593 IX CENTRAL SHEET IX SUPP.TANKCOVER SHEET FIXING ROD REINFORCEMENT TUBE PULL RIVET 4,8X 9 U9200A ALL TUBE GUIDE ZN TEL AIR PUMP CONVEYOR PLUG SP TORNIL. M8 X1,25X 20 U5739 8.8 WASHER M8 8,4X32X2 U6593 ZN BOLT M8X1,25X20 U5732 4.6 ZN FLANGE NUT M8 DIN 6923 8.8 GAL BELL PUSH ROD PVC D10 BLACK RUBBER FRAME CONNECTION CHAIN

cod. G19531191

Description

Benennung

Descripcion

TOILE COUVRE-TREMIE BB +TRIER SUPPORT GRILLE

TRICHTERABDECKTUCH BB GITTERHALTB_GEL

ONA PROTEC. TOLVA BB ESTRIBO SOPORTE REJILLA

TUBE TOILE COUVRE-TREMIE GRILLE RESERVOIR

ROHR TRICHTERABDECKTUCH BEHZLTERGITTER

TUBO ONA PROTEC. TOLVA REJILLA DEPS.

AXE AGITATEUR RESERVOIR BB250 SUPPORT VIS ALIMENTATION

SAMENMISCHERACHSE BEH. BB250 HALTERUNG SCHNECKE

EJE AGITAD. DEPS. BB250 SOPORTE CËCLEA

SUPPORT ENGRENAGE Z.15 ENTRET. COMPL. FERMETURE SORTIE RESERVOIR FER TRAPPE DE VIDANGE TYPE MICRO ARRET DISTRIBUTEUR EP. ENGRAIS RESSORT SPEC. D'ETANCHEITE ARR

HALTERUNG ZAHNRAD Z.15-KOMPL. DISTANZST VERSCHLUSS AUSTRITT DsNGERSTR. BEHZLTERENTLADUNG STREUER TYP FESTSTELLVORRICHTUNG SZAPP. ST SPEZIALFEDER DICHTUNG STREUER

SOPORTE ENGRANAJE Z.15-DISTANC.COMPL CIERRE SALIDA DEPS. ABON. SP I DESCARGA DEPS. ABON.TIPO MICRD BLOQUEO DISTRIBUIDOR ABON. MUELLE ESPEC. RETENC. BLOQ

GARNITURE VERRE VITRE CONTROLE NIV. GRAINES TENDEUR GARNITURE ARRET AXE EN TOLE PROTECTION PROTECTION RENVOI TREMIE ENGRENAGE 1/2 Z-12 TROUS CARRE ENGRENAGE 1/2 Z-12 TROUS RONDS TRONCON CHAINE 1/2 ISO 083 32 SUPPORT PALIER ROULEMENT AL+SAGE CARR+ TENDEUR DE CHAINE EPAND. ENGR.

GLASDICHTUNG KONTROLLFENSTER SAMENSTAND DICHTUNGSSPANNER FESTSTELLVORRICHTUNG BLECHACHS SCHUTZ VORGELEGESCHUTZ BEH-LTER ZAHNRAD 1/2 Z-12 F.Q. ZAHNRAD 1/2 Z-12 F.T. KETTENLZNGE 1/2 ISO 083 32 GL LAGERBsCHSE VIERKANTLAGER KETTENSPANNER DsNGERSTR. SP-52

JUNTA VIDRIO VIDRIO CONTROL NIVEL SEMILLAS TENSOR JUNTA BLOQUEO EJE DE CHAPA PROTECCIN P PROTECCION ENVIO DEPOSITO ENGRANAJE 1/2 Z-12 F.Q. ENGRANAJE 1/2 Z-12 F.T. TRECHO CADENA 1/2 ISO 083 32 SOPORTE COJINETE COJINETE ORIFICIO CUADRADO TENSOR DE CADENA ABON. SP-520

SUPPORT AVEC BRIDE M80 RONDELLE ENTRETOISE EP. ENGRAI RESSORT COMPL. ZN RESERVOIR M8 RONDELLE 16,5X30X2,5 ZN RONDELLE 28X0-3X16-5 AXE TRANSMISSION L.2485 BOUCHON SUPPORT EP. ENGRAIS D. GOUJON ELASTIQUE 6X30 VIS 4-2X25 DIN 7981 ECROU 6 UNI 5448 5.8 ZN POIGNEE VIS M8 X1,25X 12 U5739 8.8 IX ECROU M 8X1,25 U5588 6.8 I VIS M10X1,5 X 20 U5739 8.8 IX ECROU 10 5588 6.8 INOX VIS 10X25 5739 INOX A2 VIS M 8X1,25X 16 U5739 8.8 IX RONDELLE 20X2X8,5

BsCHSE MIT FLANSCH M80 ABSTANDSCHEIBE DsNGERSTREUER DRUCKFEDER ZN BEHZLTER M80 UNTERLEGSCHEIBE 16,5X30X2,5 ZN UNTERLEGSCHEIBE 28X0-3X16-5 sBERTRAGUNGSACHSE L.2485 HALTERUNGSPFROPFEN DsNGERSTR. SPANNHUELSE 6X30 SCHRAUBE 4-2X25 DIN 7981 MUTTER 6 UNI 5448 5.8 ZN HANDGRIFF SCHRAUBE M8 X1,25X 12 U5739 8. MUTTER M 8X1,25 U5588 6.8 SCHRAUBE M10X1,5 X 20 U5739 8. MUTTER 10 5588 6.8 INOX SCHRAUBE 10X25 5739 INOX A2 SCHRAUBE M 8X1,25X 16 U5739 8. UNTERLEGSCHEIBE 20X2X8,5

CASQUILLO CON BRIDA M80 ARANDELA DISTAN.ABONAD. MUELLE COMP.ZN DEPS. M80 A ARANDELA 16,5X30X2,5 ZN ARANDELA 28X0-3X16-5 EJE TRANSMISIN L 2485 A TAPN SOPORTE ABON.D.11 D ESPINA ELASTICA 6X30 TORNILLO 4-2X25 DIN 7981 TUERCA 6 UNI 5448 5.8 ZN MANILLA TORNIL. M8 X1,25X 12 U5739 8.8 TUERCA M 8X1,25 U5588 6.8 TORNIL. M10X1,5 X 20 U5739 8.8 TUERCA 10 5588 6.8 INOX TORNILLO 10X25 5739 INOX A2 TORNIL. M 8X1,25X 16 U5739 8.8 ARANDELA 20X2X8,5

VIS M6X1X60 U5737 8.8 ZN ECROU M 6X 1 U5588 I VIS M6 X1 X 16 U5739 8.8 IX VIS M 8X1,25X40 U5737 8.8 ZN VIS M 6X12 RONDELLE 28X2-5X6-5 RONDELLE M6 6,4X24X2 U6593 IX

SCHRAUBE M6X1X60 U5737 8.8 ZN MUTTER M 6X 1 U5588 SCHRAUBE M6 X1 X 16 U5739 8. SCHRA. M8X1,25X40 U5737 8.8 ZN SCHRAUBE M 6X12 UNTERLEGSCHEIBE 28X2-5X6-5 SCHEIBE M6 6,4X24X2 U6593 IX

TORNILLO M6X1X60 U5737 8.8 ZN TUERCA M 6X 1 U5588 TORNIL. M6 X1 X 16 U5739 8.8 TORNIL.M8X1,25X40 U5737 8.8 ZN TORNILLO M 6X12 ARANDELA 28X2-5X6-5 ARANDELA M6 6,4X24X2 U6593 IX

TIGE DE FIXATION TUBE DE RENFORCEMENT RIVET A RUPTURE 4,8X 9 U9200A

BEFESTIGUNGSTANGE VERSTZRKUNGROHR REISSNIETE 4,8X 9 U9200A ALL

VARILLA DE FIJACIN TUBO DE REFUERZO REMACHE DESGAR. 4,8X 9 U9200A

BOUCHON CONVOYEUR TURBINE SP

VAKUUM FTRDERPFROPFEN SP

TAPN CONDUCTOR DEPR. SP

RONDELLA M8 8,4X32X2 U6593 ZN VIS M8X1,25X20 U5732 4.6 ZN ECROU BRIDE .M8 DIN 6923 8.8 Z

SCHEIBE M8 8,4X32X2 U6593 ZN SCHRA. M8X1,25X20 U5732 4.6 ZN GEFLANSCHTE MUTTER M8 DIN6923

ARANDELA M8 8,4X32X2 U6593 ZN TORN. M8X1,25X20 U5732 4.6 ZN TUERCA BRIDA M8 DIN 6923 8.8 Z

CHA+NE ACCROCHAGE TOILE EN CAO

KETTE BEFESTIGUNG GUMMITUCH

CADENA ENGANCHE LONA DE CAUCHO

TAV. 211 10 5 9

SX 2

14 1 4

13 3

15 19

18 16

D.10x 780 - 8

20 21

22 29 31 23 32 24

30 28

cod. G19531191

TAV. 211

SPEEDY SET Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

F02100066 G19003660 F01070061 F01050083 G19703192 G19003680 G19003720 G16670320 F01420038 F01200233 G19003670 F01020419 G65336055 G19003710 G16670310 G19003690 F01080032 G16670100 G19003700 G66248173 G66248172 G66248211 G66248176 G18701500 G20860126 F01070075 G20970097 G66248178 G65336062 G19002850 F01070011 G13722330

Descrizione

Description

Benennung

Descripcion

SPINA E.P. 4X 36 U6873 C70 BR SUPPORTO VITE M3,9X1,34X9,5 U6954 4.8NI VITE M5X0,8X12 U5927 A2 IX DECAL.TAB.SPAND.MAGICA 20X8.00 INGRANAGGIO Z.15 GHIERA REGOLAZIONE SX TONDO D.10X780 ROS.M6 6,4X 18X 2 U6593 IX DADO M 6X 1 U5588 A2 IX MANOPOLA SPEEDY SET VITE M 6X1 X 16 U5739 A2 IX MOLLA SPEC.REGOL.SPAND. SP GHIERA REGOLAZIONE DX SUPPORTO MOLLA REGOLATORE CREMAGLIERA VITE M4X0,7X10 U7688 A2 IX REGOLATORE APERTURA COPERCHIO SPEEDY SET ASSE DISTR.SPAND. SP DOSATORE DISTR.SPAND. SP PERNO RONDELLA FUSA SPAND. SP CORPO DISTR.SPAND. SP RONDELLA 29,5 X38 X0,3 KIT INGR DISTR CONCIME (2+2) VITE M4,2X1,41X38 U6954 4.8 NI RONDELLA 32X3X4,5 SCIVOLO DISTR.SPAND. SP MOLLA SPEC.SCIV.DISTR.SPAND.SP PROTEZIONE PIGNONE VITE M4,2X1,41X9,5 U6950 4.8NI DISTR.COMPL.8PALE SPEEDY SET F

PIN EL. 4X 36 U6873 C70 BR SUPPORT BOLT 3,9X 9,5 DIN 7981 GRUB-BOLT5X12 UNI 5927

SUPPORT VIS 3,9X 9,5 DIN 7981 GOUJON 5X12 UNI 5927

HALTERUNG SCHRAUBE 3,9X 9,5 DIN 7981 STIFT 5X12 UNI 5927

SOPORTE TORNILLO 3,9X 9,5 DIN 7981 TORNILLO SIN CABEZA 5X12 5927

ENGRENAGE Z 15 MANCHON DE REGLAGE GCH ROND D.10X780 RONDELLE M6 6,4X18X2 U6593 IX ECROU M 6X 1 U5588 I POIGN+E SPEEDY SET VIS M6 X1 X 16 U5739 8.8 IX RESSORT SPEC. REGL. EP. ENTRAI BAGUE REGLAGE DROITE

ZAHNRAD Z 15 EINSTELLMUTTER LINKS RUNDEISEN D.10X780 SCHEIBE M6 6,4X18X2 U6593 IX MUTTER M 6X 1 U5588 GRIFF SPEEDY SET SCHRAUBE M6 X1 X 16 U5739 8. SPEZIALFEDER STREUEREINSTELLUN EINSTELLMUTTER RE

ENGRANAJE Z 15 ROSCA REGULACION IZQUIERDA BARRA REDONDA D. 10X780 ARANDELA M6 6,4X18X2 U6593 IX TUERCA M 6X 1 U5588 EMPUÐADURA SPEEDY SET TORNIL. M6 X1 X 16 U5739 8.8 MUELLE ESPEC. REGUL. ABONADORA CONTRATUERCA REGULACIN DER.

CR+MAILL+RE VIS M4X 0,7X10 U7688 A2 IX REGULATEUR OUVERTURE COUVERCLE SPEEDY SET AXE DISTRIBUTEUR EP.ENGRAIS SP DOSEUR DISTRIBUTEUR EP. ENGRAI PIVOT RONDELLE MOULEE EP. ENGR CORPS DISTRIB. EP. ENGRAIS SP RONDELLE 29,5 X38 X0,3 COUPLE CON DISTR ENGRAIS (2+2) VIS 4-2X38 DIN 7981 RONDELLE 32X3X4-5 LANCOIR DISTRIBUTION EP. ENGR. RESS. SPEC. LANCOIR DISTR. EP. PROTECTION PIGNON VIS AUTOTAR. 4-2X9-5 T. E. COU DISTR.COMPL.8PALETTES SPEEDY S

ZAHNSTANGE SCHRAUBE M4X 0,7X10 7688 A2 IX TFFNUNGSEINSTELLER DECKEL SPEEDY SET ACHSE SZAPPARAT STREUER SP DOSIERER DsNGERSTREUER. SP ZAPFEN LOSE UNTERLEGSCHEIBE ST VERTEILUNGSKTRPER STREUER SP UNTERLEGSCHEIBE 29,5X38X0,3 KIT ZAHNRZDER DsNGERSTREUER SCHRAUBE 4-2X38 DIN 7981 UNTERLEGSCHEIBE 32X3X4-5 DsNGERSTREUER RUTSCHE SP SPEZ.FEDER RUTSCHE SZAPP. STRE RITZELSCHUTZ SELBSTSCHNEID. SCHRAUBE 4-2X9SAATGUTAUS.8SCH.KOMPL.SPEEDY S

CREMALLERA TORNILLO M4X0.7X10 U7688 A2 IX REGULADOR ABERTURA TAPA SPEEDY SET EJE DISTR. ABON. SP DOSIFICADOR DISTR.ABON. SP PERNO ARANDELA FUNDIDA ABONAD CUERPO DISTR. ABON. SP ARANDELA 29,5 X38 X0,3 SET ENGRANAJES DISTRIB. ABONO TORNILLO 4-2X38 DIN 7981 ARANDELA 32X3X4-5 PLANO INCLINADO DISTR. ABON. S MUELLE ESPEC.PLANO INCL.DISTR. PROTECCIN PI¾N PR TORNILLO AUTORROSC. 4-2X9-5 DISTR.COMPL.8PALETAS SPEEDY SE

cod. G19531191

GEAR Z 15 LEFT ADJUSTMENT KNURLED NUT D.10X780 ROUND WASHER M6 6,4X18X2 U6593 IX NUT M 6X 1 U5588 IX SPEEDY HANDLE SET BOLT M6 X1 X 16 U5739 8.8 IX SPEC SPRING MAN. SPR. ADJUSTM. RIGHT ADJUSTMENT KNURLED ADJ.SPRING SUPPORT RACK BOLT M4X 0,7X10 U7688 A2 IX OPENING REGULATOR COVER SPEEDY SET MANURE SPREADER DISTR. SPINDLE MAN.SPR. SEED METERING DEVICE MAN. SPR. CAST WASHER PIN. SP MANURE SPREADER DISTR. CASING WASHER 29,5 X 38 X 0,3 KIT- MAN. DISTR. GEARS (2+2) BOLT 4-2X38 DIN 7981 WASHER 32X3X4-5 CHUTE- MANURE-SPREADER DISTRIB SPEC SPRING - MAN. SPR. DISTR. PINION GUARD BOLT- SELF-TAPPING 4-2X9-5T.E. COMPL.SPEEDY 8-BLADE DISTR. SE

TAV. 220 18

17 1

21 20 16 7

19 15

9 10

14 4

3 12 8

cod. G19531191

TAV. 220

ELEMENTI DI CONCIMAZIONE Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

F01200244 F01020070 G18904510 G18904520 G17113331 G17110190 G17170170 G16670600 G15473060 G65336025 F01020156 F01220048 F01410076 G18903911 F01020114 F02200342 F01040117 F01410064 G18701140 F01020544 F01200306

Descrizione

Description

Benennung

Descripcion

DADO M 8X1,25 U5588 6.8 ZN VITE M 8X1,25X45 U5737 8.8 ZN MOLLA QUADRA SX 3 SPIRE MOLLA QUADRA DX 3 SPIRE ASS.SUPPORTO MOLLA QUADRA BOCCOLA FERMO SUPP.ELEM.CONCIM FERMO MOLLA QUADRA ZN FALCIONE ELEM.CONCIMAZ.QUADRA TUBO DISCESA CONCIME MOLLA SPEC.ZN STRINGIT.ASP.SP VITE M12X1,75X50 U5737 8.8 ZN DADO M12X1,75 D980 8 ZN ROS.M12 13X 24X2,5 U6592 ZN MOLLA FERMO TUBO D.35 VITE M10X1,5X50 U5737 8.8 ZN COPIGLIA R 2X 50 ZN VITE M10X1,5X16 U5931 8.8 ZN ROS.M10 10,5X 20X 2 U6592 ZN RONDELLA 11 X35 X5 VITE M14X2X40 U5739 8.8 ZN DADO M14X 2 U5588 6.8 ZN

NUT M8 X1,25 U5588 6.8 ZN BOLT M8X1,25X45 U5737 8.8 ZN

ECROU M8 X1,25 U5588 6.8 ZN VIS 8 X45 5737 8.G ZN

MUTTER M8 X1,25 U5588 6.8 ZN SCHRAUBE 8 X45 5737 8.G ZN

TUERCA M8 X1,25 U5588 6.8 ZN TORNILLO 8 X45 5737 8.G ZN

BUSHING FERMO SUPP.ELEM.CONCI SQUARE SPRING STOP ZN SQUARE SPRING FERT COULTER FERTILISER DOWN TUBE SPEC SPRING ZN FAN . PIPE CLAM BOLT M12X1,75X50 U5737 8.8 ZN NUT M12X1,75 D980 8 ZN WASHER D12 U6592 ZN PIPE LOCK SPRING D.35 BOLT M10X 1,5X50 U5737 8.8 ZN SPRING SPLIT PIN 2X50 ZN BOLT M10X1,5X16 5931 8.8 ZN WASHER M10 10,5X20X2 U6592 ZN WASHER 11 X 35 X 5 BOLT M14X2X40 NUT M14X2

BOITE FERMO SUPP.ELEM.CONCIM ARR-T RESSORT CARR+ ZN SOC +LEM. FERTILIS. RESSORT CA COUDE DESCENTE ENGRAIS RESSORT SPEC. ZN SERRE-TUBE AS VIS M12X1,75X50 U5737 8.8 ZN ECROU M12X1,75 D980 8 ZN RONDELLE D12 U6592 ZN RESSORT ARR-T TUBE D.35 VIS M10X 1,5X50 U5737 8.8 ZN GOUPILLE R 2X50 ZN VIS M10X1,5X16 RONDELL.M10 10,5X20X2 U6592 ZN RONDELLE 11 X35 X5 VIS M14X2X40 ECROU M14X2

BUCHSE FERMO SUPP.ELEM.CONCIM SPERRE QUADRATISCHE FEDER ZN S-SCHAR ELEM.D_NGUNG QUADR.FED DsNGERSENKROHR SPEZIALFEDER ZN RORHSCHELLE AB SCHR. M12X1,75X50 U5737 8.8 ZN SCHEIBE M12X1,75 D980 8 ZN SCHEIBE D12 U6592 ZN ROHRSPERRFEDER D.35 SCHRA.M10X 1,5X50 U5737 8.8 ZN SPLINT R 2X50 ZN SCHRAUBE M10X1,5X16 SCHEIBE M10 10,5X20X2 U6592 ZN UNTERLEGSCHEIBE 11 X35 X5 SCHRAUBE M14X2X40 MUTTER M14X2

MANGUITO FERMO SUPP.ELEM.CONCI TOPE MUELLE CUADRADO ZN BOTA ELEM.ABONAD.MUELLE CUADRA TUBO DESCENSO ABONO MUELLE ESPEC. ZN APRIETA TUBOS TORN. M12X1,75X50 U5737 8.8 ZN TUERCA M12X1,75 D980 8 ZN ARANDELA D12 U6592 ZN MUELLE TOPE TUBO D. 35 TORN. M10X 1,5X50 U5737 8.8 ZN CHAVETA R 2X50 ZN TORNILLO M10X1,5X16 ARAND. M10 10,5X20X2 U6592 ZN ARANDELA 11 X35 X5 TORNILLO M14X2X40 DADO M14X2

cod. G19531191

TAV. 230

25 48

39 21 20 46

35 14

34 3 15

33 36

46 35

36 26

1 2

36 25 22

Rosso/Red - 54 11

MTR - 58

32 30 9

M6 - 53 M4 - 62

23 24

8 5 51

40 56

57 40 41

M6x30 - 52 M4x12 - 59 M6x12 - 60 M6x25 - 61

cod. G19531191

TAV. 230

CONCIMAZIONE PNEUMATICA Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63

G13912101 G13912131 G13912350 G13912460 G13912470 G13912512 G15450390 G15450401 G15450410 G15450420 G15450431 G15470410 G15470420 G15471471 G18901960 G18902650 G18903180 G15273150 G22230264 G23440551 G23440553 G23440562 G23440563 G23440564 F01020048 F01020404 F01020445 F01020472 F01020476 F01030054 F01080044 F01230048 F01200232 F01200244 F01200270 F01410037 F01410064 F01420048 F01430047 F04010156 F02050078 F02150036 F03100367 F03100500 F02300023 F02300018 F05150060 G66248098 F03150664 F06220034 G67320001 F01020037 F01230016 G58162014 G15473770 F01440012 F02050370 G17772000 F01020362 F01020398 F01020406 F01220011 G16670670

Descrizione

Description

Benennung

Descripcion

UGELLO CONCIMAZIONE PNEUMATICA TUBO CONCIMAZIONE PNEUMATICA FASCETTA VASO ESPANSIONE COPRIVENTOLA LATO SCHIENALE COPRIVENTOLA LATO MOTORE VASO ESPANSORE D.35-50 PULEGGIA CONDOTTA PUL.CONDOTTA CONCIM.PNEUM. RONDELLA X GIUNTO ELASTICO GIUNTO ELAS.ROTEX19 95/98SHORE FLANGIA SUPP.CONC.PNEUM. RINFORZO ANTERIORE RINFORZO POSTERIORE SUPPORTO CONVOGLIATORE GUIDATUBI PER 3 TUBI MOLLA SUPP.VASO ESPANSIONE MOLLA CONVOGLIATORE MICRO RACCORDO FINALE RONDELLA TUBI DEPR. FLANGIA CONVOGLIATORE HL/ID CONVOGLIATORE D.35 HL/ID DISTANZ.GUSCI SOFFIANTE HL/ID GRIGLIA DI PROTEZIONE HL/ID COPERCHIO CHIUSURA SOFF. HL/ID VITE M6X1X75 U5737 8.8 ZN VITE M6X1X20 U5739 8.8 ZN VITE M8X1,25X30 U5739 8.8 ZN VITE M10X1,5X25 U5739 8.8 ZN VITE M10X1,5X30 U5739 8.8 ZN VITE M 8X1,25X16 U5933 10.9 ZD VITE M5X0,8X14 U7688 4 8 ZN DADO M10X 1,5 D982 8 ZN DADO M 6X 1 U5588 6.8 ZN DADO M 8X1,25 U5588 6.8 ZN DADO M10X 1,5 U5588 6.8 ZN ROS.M6 6,4X12,5X1,6 U6592 ZN ROS.M10 10,5X 20X 2 U6592 ZN ROS.M8 8,4X 24X 2 U6593 ZN ROS.M6 6,4X 11X0,7 U8842J ZN CUSC.d20 D47 B14 6204 2RSH ANELLO E. DE 20X 1,2 U7435 C70 LINGUETTA 6X 6X 20 U6604A TUBO VULCANO PU R 76 TUBO EOLO 35 PU FASCETTA STRING. 80/100 H.8 FASCETTA STRING. 25/40 H.8 FASCETTA POLYAMIDE 9X380 31919 TAPPO CONVOGLIATORE DEPR. SP TAPPO MASCHIO 1/8 ESAGONO VOLANTINO M5 X 25 VPA/25 VENTOLA PLASTICA DISCO L80M8 VITE M6X1X30 U5737 8.8 ZN DADO M 4X 0,7 D982 8 ZN ELEM.ELAS.ROTEX 19 95/98 SHORE SOFFIANTE CONC.PNEUM.COMPL. ROS. 20X28X 2 D988 IX ANELLO E. DI 47X1,75 U7437 C70 ASS.TUBO MICROGRANULATORE VITE M4X0,7X12 U5739 8.8 ZN VITE M6X1X12 U5739 8.8 ZN VITE M6X1X25 U5739 8.8 ZN DADO M 6X 1 D980 8 ZN DISTANZIALE D.48,1X1,5 L=25

PNEUMATIC FERTIL. NOZZLE PIPE PNEUMATIC FERTILISATION EXPANSION CHAMBER CLAMP BACK FAN PROTECTION MOTOR FAN PROTECTION D.35-50 EXPANSION TANK DRIVEN PULLEY D.28

BUSE FUMAGE PNEUMATIQUE TUBE FUMAGE PNEUMATIQUE COLLIER VASE EXPANSION PROTECTION ROTOR DOSSIER PROTECTION ROTOR MOTEUR VASE EXPANSION D.35-50 POULIE ENTRAINEE D. 28

DsSE PNEUMATISCHE DsNGUNG ROHR PNEUMATISCHE DsNGUNG SCHELLE EXPANSIONSGEFZSS RUECKENLAUFRADSCHUTZ MOTORLAUFRADSCHUTZ EXPANSIONSGEFZSS D.35-50 GETRIEBENE SCHEIBE D.28

BOQUILLA DE ABONO NEUMATICA TUBO DE ABONO NEUMAT. ABRAZADERA DEPSITO DE EXPANSIC PROTECCIN VENTILADOR RESPALDOP PROTECCIN VENTILADOR MOTOR P DEPSITO DE EXPANSIN D.35-50 POLEA CONDUCIDA D.28

LOCK WASHER LOCK COUPLING FLANGE SUPPORT FRONT REINFORCEMENT REAR REINFORCEMENT CONVEYOR SUPPORT PIPE GUIDE FOR 3 PIPES EXPANSION TANK SUPPORT SPRING MICRO CONVEYOR SPRING ENDING CONNECTION PIPE AIR PUMP PIPE WASHER CONVEYOR FLANGE HL/ID CONVEYOR- D.35 HL/ID BLOWER SHELL SPACER HL/ID PROTECT. GRID HL/ID BLOWER CLOSING COVER . HL/ID BOLT M6X 1X75 U5737 8.8 ZN BOLT M 6X 1X20 U5739 8.8 ZN BOLT M 8X30 BOLT 10X25 5739 8.G GALVANIZED BOLT M10X1,5 X 30 5739 8.8 ZN BOLT 8X16 UNI5933 10.9 GALVANI BOLT 5 X14 7688 GALVANIZED NUT M10X 1,5 D982 8 ZN NUT 6 UNI 5588 6.8 GALVANIZED NUT M8 X1,25 U5588 6.8 ZN NUT M10X 1,5 U5588 6.8 ZN PLANE WASHER D.6 WASHER M10 10,5X20X2 U6592 ZN WASHER M8 8,4X 24X 2 U6593 ZN WASHER D6 DIN 6798 D.INT.GALV. BEARING d20 D47 B14 6204 2RSH SEEGER RING E. 20X1,2 7435 C70 PARALLEL KEY 6X 6X 20 U6604A FLEXIBLE PVC PIPE R 76 TUBE EOLO 35 PU PIPE CLAMP 80/100 H.8 STRING FASTEN.STRAPS 25/40 H.8 POLYAMIDE FASTENING STRAPS 9X3 AIR PUMP CONVEYOR PLUG SP 1/8 MALE HEXAGON. PLUG HANDWHEEL M5 X 25 VPA/25 PLASTIC FAN- DISK L80M8 BOLT M6X 1X 30 U5737 8.8 ZN NORM.SELF-LOCKING NUT 4 GALVAN ELASTIC ELEMENT OF JOINT 24.24 COMPL. FERTILIZER PNEUMATIC BL WASHER 20X28X2 DIN 988 SEEGER RING 47X 1,75 U7437 C70

RONDELLE DE BLOCAGE JOINT DE BLOCAGE BRIDE SUPPORT RENFORCEMENT AVANT RENFORCEMENT ARRIERE SUPPORT CONVOYEUR GUIDE-TUBES POUR 3 TUBES RESSORT SUPP. VAS EXPANSION RESSORT CONVOYEUR MICRO RACCORD FINAL RONDELLE TUBES DISPOSITIF DE D BRIDE CONVOYEUR HL/ID CONVOYEUR D. 35 HL/ID ENTRETOISE COQUES SOUFFLANTE H GRILLE DE PROTECTION HL/ID COUVERCLE FERMETURE SOUFFL. HL VIS 6 X75 5737 8.G ZN VIS M 6X20 VIS M 8X30 VIS 10X25 5739 8.G ZN VIS M10X1,5 X 30 5739 8.8 ZN VIS 8X16 UNI 5933 10.9 ZN VIS 5 X14 7688 ZN ECROU M10X 1,5 D982 8 ZN ECROU 6 UNI 5588 6.8 ZN ECROU M8 X1,25 U5588 6.8 ZN ECROU M10X 1,5 U5588 6.8 ZN RONDELLE D.6 RONDELL.M10 10,5X20X2 U6592 ZN RONDELLE M8 8,4X 24X2 U6593 ZN RONDELLE D6 DIN 6798 D. INT. Z

SPERRSCHEIBE ARANDELA DE BLOQUEO SPERRKUPPLUNG JUNTA DE BLOQUEO LAGERFLANSCH BRIDA DE SOPORTE VORDERE VERSTZRKUNG REFUERZO DELANTERO HINTERE VERSTZRKUNG REFUERZO TRASERO HALTERUNG FTRDERER SOPORTE TRANSPORTADOR ROHRFsHRUNG FsR 3 ROHRE GUA TUBOS PARA 3 TUBOS G OB. FEDER EXPANSIONSGEFZSS MUELLE SOP. DEPSITO DE EXPANSA FEDER MIKRO FTRDERER MUELLE CONDUCTOR MICRO ENDANSCHLUSS UNION FINAL UNTERLEGSCHEIBE VAKUUMPUMPENRO ARANDELA TUBOS BOMBA VACO. S FLANSCH FTRDERER HL/ID BRIDA CONDUCTOR HL/ID FTRDERER D.35 HL/ID CONDUCTOR D.35 HL/ID DISTANZSTsCK SCHALEN GELBZSE H DISTANC. CASCARAS SOPLAD. HL/I SCHUTZGITTER HL/ID REJILLA DE PROTECCIN HL/ID G ABSCHLUSSDECKEL GEBL. HL/ID TAPA CIERRE SOPL. HL/ID SCHRAUBE 6 X75 5737 8.G ZN TORNILLO 6x75 5737 8.G ZN SCHRAUBE M 6X20 TORNILLO M 6X20 SCHRAUBE M 8X30 TORNILLO M 8X30 SCHRAUBE 10X25 5739 8.G ZN TORNILLO 10X25 5739 8.G ZN SCHRA. M10X1,5X 30 5739 8.8 ZN TORN. M10X1,5 X 30 5739 8.8 ZN SCHRAUBE 8X16 UNI 5933 10.9 ZN TORNILLO 8X16 UNI 5933 10.9 ZN SCHRAUBE 5 X14 7688 ZN TORNILLO 5 X14 7688 ZN SCHEIBE M10X 1,5 D982 8 ZN TUERCA M10X 1,5 D982 8 ZN MUTTER 6 UNI 5588 6.8 ZN TUERCA 6 UNI 5588 6.8 ZN MUTTER M8 X1,25 U5588 6.8 ZN TUERCA M8 X1,25 U5588 6.8 ZN MUTTER M10X 1,5 U5588 6.8 ZN TUERCA M10X 1,5 U5588 6.8 ZN SCHEIBE D.6 ARANDELA D.6 SCHEIBE M10 10,5X20X2 U6592 ZN ARAND. M10 10,5X20X2 U6592 ZN SCHEIBE M8 8,4X 24X 2 U6593 ZN ARANDELA M8 8,4X 24X2 U6593 ZN UNT. SCHEIBE D6 DIN 6798 D. IN ARANDELA D6 DIN 6798 D.INT.ZN

SEEGER 20X 1,2 U7435 C70 LANGUETTE 06X6X20 UNI6604 TUBE FLEXIBLE PVC R 76 TUBE EOLO 35 PU COLLIER DE SERRAGE 77/95 COLLIER DE SERRAGE 25/40 H.8 COLLIER POLYAMIDE 9X350 31919 BOUCHON CONVOYEUR TURBINE SP BOUCHON MALE 1/8 HEXAGONAL VOLANT M5 X 25 VPA/25 ROTOR PLASTIQUE DISQUE L80M8 VIS M6X 1X 30 U5737 8.8 ZN ECROU AUTOB.NOR.4 ZN ELEM. ELASTIQUE DU JOINT 24.24 SOUFFLEUR ENGRAIS PNEUMATIQUE RONDELLE 20X28X2 DIN 988 SEEGER E. 47X 1,75 U7437 C70

SEEGER E. 20X 1,2 U7435 C70 FEDERKEIL 06X6X20 UNI6604 76 SCHLAUCH PVC ROHRSCHELLE 80/100 H.8 SCHELLE 25/40 H.8 SCHELLE POLYAMID 9X350 31919 VAKUUM FTRDERPFROPFEN SP GEWINDEPFROPFEN 1/8 SECHSKANT HANDRAD M5 X 25 VPA/25 SCHEIBE PLASTIKRAD L80M8 SCHRAUBE M6 X30 5737 8.G ZN SELBSTSP. MUTTER NOR. 4 ZN ELAST. KUPPLUNGSELEM. 24.24 PNEUMATISCHES GEBLZSE KOMPL. UNTERLEGSCHEIBE 20X28X2 DIN 98 SEEGERING E. 47X1,75 U7437 C70

LENGsETA 06X6X20 UNI6604 TUBO FLEXIBLE PVC R 76 TUBO EOLO ABRAZADERA P. MANGUERA 80/100 ABRAZADERA 25/40 H.8 ABRAZADERA POLIAMIDA 9X350 319 TAPN CONDUCTOR DEPR. SP D TAPN MACHO 1/8 HEXæGONO D VOLANTE M5 X 25 VPA/25 VENTILADOR PLæSTICO DISCO L80M TORNILLO M6X 1X30 U5737 8.8 ZN TUERCA AUTOB. NOR. 4 ZN ELEM.ELÁSTICO DEL ACOPLAMIENTO SOPLADOR ABONO NEUM-TICO COMPL ARANDELA 20X28X2 DIN 988 ANILLO E. 47X 1,75 U7437 C70

BOLT 4X12 5739 8.G GALVANIZED BOLT M6X1X12 U5739 8.8 ZN BOLT M6X 1X 25 U5739 8.8 ZN NUT M6X1 D980 8 ZN

VIS 4X12 5739 8.G ZN VIS M 6X12 VIS M 6X25 ECROU M6X1 D980 8 ZN

SCHRAUBE 4X12 5739 8.G ZN SCHRAUBE M 6X12 SCHRAUBE M 6X25 MUTTER M6X1 D980 8 ZN

TORNILLO 4X12 5739 8.G ZN TORNILLO M 6X12 TORNILLO M 6X25 TUERCA M6X1 D980 8 ZN

cod. G19531191

TAV. 240

42 5

(Precisare metri) 6

7 (Precisare metri) 8 9

cod. G19531191

TAV. 240

VARIANTI CONCIMAZIONE FILE ESTERNE Pos.

Cod.

1 2 3 4 5 6 7 8 9 10

G19005240 G15275171 F01020050 F01220011 F01420036 F03100506 F03100500 G13912101 G13912131 F02300018

Descrizione

Description

Benennung

Descripcion

TAPPO ASPIRAZIONE FORATO CONVOGLIATORE SOFF.2U VITE M6X1X80 U5737 8.8 ZN DADO M 6X 1 D980 8 ZN ROS.M6 6,4X 18X 2 U6593 ZN TUBO EOLO PU D.45 TUBO EOLO 35 PU UGELLO CONCIMAZIONE PNEUMATICA TUBO CONCIMAZIONE PNEUMATICA FASCETTA STRING. 25/40 H.8

FLANGE

BRIDE

FLANSH

BRIDA

BOLT M6X 1X80 U5737 8.8 ZN NUT M6X1 D980 8 ZN FLAT WASHER 6-6X 18X2 6593 ZN TUBE EOLO PU D.45 TUBE EOLO 35 PU PNEUMATIC FERTIL. NOZZLE PIPE PNEUMATIC FERTILISATION STRING FASTEN.STRAPS 25/40 H.8

VIS 6 X80 5737 8.G ZN ECROU M6X1 D980 8 ZN ROND. PLATE 6-6X 18X2 6593 ZN TUBE EOLO PU D.45 TUBE EOLO 35 PU BUSE FUMAGE PNEUMATIQUE TUBE FUMAGE PNEUMATIQUE COLLIER DE SERRAGE 25/40 H.8

SCHRAUBE 6 X80 5737 8.G ZN MUTTER M6X1 D980 8 ZN SCHEIBE 6-6X 18X2 6593 ZN

TORNILLO 6 X80 5737 8.G ZN TUERCA M6X1 D980 8 ZN ARAND. PLANA 6-6X 18X2 6593 ZN

DsSE PNEUMATISCHE DsNGUNG ROHR PNEUMATISCHE DsNGUNG SCHELLE 25/40 H.8

TUBO EOLO BOQUILLA DE ABONO NEUMATICA TUBO DE ABONO NEUMAT. ABRAZADERA 25/40 H.8

cod. G19531191

Serbatoio PLASTICA 30 litri PLASTIC hopper 30 liters

TAV. 251

77 68 50

OPTIONAL

63 58 57

11 18 44

40 48

10 12

1 32

3 6

23 22

37 31

7 9

3U 19

24 28 29

67 55 56

54 74 75

(*) Kit = (2+2 pz.)

64 53 52 15

38 - 2U 33 - 3U 39 - 2U 34 - 3U

26 29

69 73

cod. G19531191

TAV. 251

MICROGRANULATORE Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55

G17631310 G66248120 G66248138 G66248126 F01420084 F02200162 F01200232 F01070122 G11435240 F03011081 F04150042 G66248119 F01410088 F02200194 G19003670 G17772900 F02100083 F02100314 F01050083 F01030041 G19003680 G19003660 F01200233 F01020417 F01070061 G16670310 G65336055 G19003720 F02100066 G17772140 G19003690 F01080032 G15276110 G15276120 F02100062 G17772550 G11400060 G15276160 G15276130 F01230024 G19006620 G15475271 F01020472 F01200270 F20110706 G16675090 F01420060 F01420038 G19006403 G19006413 G66248123 G66248116 G20970100 G66248159 F01420011

Descrizione

Description

ASSE TRASM.DISTR. RUOTA DENT.FORO QUAD.Z-24 M80 COPERCHIO SUPP.TRASM. M80 SUPP.TRASMISSIONE M80 ROS.M14 14,5X 36X 3 U6593 ZN COPIGLIA 3X 20 U1336 ZN DADO M 6X 1 U5588 6.8 ZN VITE M3,9X1,34X13 U6955 4.8NI SUPPORTO ASSE CARTER GUARNIZIONI LABBRO DE100 BOCCOLA CLIP IGUS MCM-14-03 RUOTA DENTATA Z-24 M80 ROS.M14 15X 28X2,5 U6592 ZN COPIGLIA 4X 25 U1336 ZN MANOPOLA SPEEDY SET ALBERO REGOLAZIONE SPEEDY SET SPINA E.P. 5X 24 U6873 C70 BR SPINA EL.5 X36 DIN 1481 INOX VITE M5X0,8X12 U5927 A2 IX VITE M6X1X10 U5933 10.9 ZD INGRANAGGIO Z.15 SUPPORTO DADO M 6X 1 U5588 A2 IX VITE M 6X1 X 12 U5739 A2 IX VITE M3,9X1,34X9,5 U6954 4.8NI SUPPORTO MOLLA REGOLATORE MOLLA SPEC.REGOL.SPAND. SP GHIERA REGOLAZIONE SX SPINA E.P. 4X 36 U6873 C70 BR REGOLATORE APERTURA MICRO CREMAGLIERA VITE M4X0,7X10 U7688 A2 IX ASSE AGITATORE SERB.30L 3U PIASTRA DOSATORI 3U SPINA E.P. 4X 24 U6873 C70 BR BOCCOLA 10,4 X25 X16 FORO 5 ZN DISTRIBUTORE MICRO SPEEDY SET ASSE AGITATORE SERB.30L 2U PIASTRA DOSATORI 2U DADO M 6X 1 D982 A2 IX GUARNIZIONE PIASTRA MICRO SUPPORTO MICRO VITE M10X1,5X25 U5739 8.8 ZN DADO M10X 1,5 U5588 6.8 ZN CAV.Q.B=35 M=10X1,5 L=60 TAPPO PLASTICA MICRO C/OR ROS.M10 10,5X 30X2,5 U6593 ZN ROS.M6 6,4X 18X 2 U6593 IX SERBATOIO MICRO DELTA COPERCHIO SERB.MICRO DELTA CORPO DISTRIBUZIONE M80 INGR.FORO QUADRO Z-14 M80 RONDELLA 30X0,5X22 ACC. PIGNONE CONICO Z-14 M80 ROS.M4 4,3X 16X 1 U6593 ZN

DISTR. TRANSMISSION AXLE GEAR-WHEEL- SQUARE HOLE- Z-24 TRANSMISSION SUPP. COVER M80 TRANSM.SUPPORT M80 GALVANIZED WASHER 14 X36 X3 SPLIT PIN 3 X20 1336 GALVAN. NUT 6 UNI 5588 6.8 GALVANIZED BOLT M3,9X1,34X13 U6955 4.8NI CARTER AXLE SUPPORT LIP GASKET D100 BUSH CLIP IGUS MCM-14-03 GEAR-WHEEL Z-24 M80 WAS.M14 15X 28X2,5 U6592 ZB SPLIT PIN 4 X25 1336 GALVAN. SPEEDY HANDLE SET ADJUSTING AXLE SPEEDY SET PIN EL. 5 X24 DIN 1481 PIN EL.5 X36 DIN 1481 INOX GRUB-BOLT5X12 UNI 5927 BOLT 6x10 5933 10.9 GALVANIZ. GEAR Z 15 SUPPORT NUT M 6X 1 U5588 IX BOLT M6 X1 X12 U5739 A2 IX BOLT 3,9X 9,5 DIN 7981 ADJ.SPRING SUPPORT SPEC SPRING MAN. SPR. ADJUSTM. LEFT ADJUSTMENT KNURLED NUT PIN EL. 4X 36 U6873 C70 BR AIR REGULATOR RACK BOLT M4X 0,7X10 U7688 A2 IX STIRRER SPINDLE 30L 3U MICRO DISTR.PLATE 3U PIN EL. 4 X24 DIN 1481 BUSHING D10,4X25X16 HOLE 5 ZN DISTRIBUTOR MICRO SPEEDY SET STIRRER SPINDLE 30L 2U MICRO DISTR.PLATE 2U NORM.SELF-LOCKING NUT 10 GASKET PLATE MICRO MICRO SUPPORT BOLT 10X25 5739 8.G GALVANIZED NUT M10X 1,5 U5588 6.8 ZN U BOLT Q.B=35 M=10X1,5 L=60 PLASTIC PLUG MICRO C/OR WASHER 10,5X30 WASHER M6 6,4X18X2 U6593 IX TANK MICRO DELTA TANK COVER MICRO DELTA DISTRIBUTION CASING M80 GEARS- SQUARE HOLE Z-14 M80 WASHER 30X0-5X22 ACC. BEVEL PINION Z-14 M80 FLAT WASHER 4-3X 16X1-5 6593 G

cod. G19531191

Description

Benennung

Descripcion

ROUE DENTEE TROU CARRE Z-24 M8 COUVERCLE SUPPORT ENTRAINEM. SUPPORT ENTRAINEMENT M80 RONDELLE 14 X36 X3 ZN GOUPILLE 3 X20 1336 ZN ECROU 6 UNI 5588 6.8 ZN

RAD VERZAHNT VIERKANTLOCH.Z-24 DECKEL ANTRIEBSHALTERUNGS M80 ANTRIEBSHALTERUNG M80 UNTERLEGSCHEIBE 14 X36 X3 ZN SPLINT 3 X20 1336 ZN MUTTER 6 UNI 5588 6.8 ZN

RUEDA DENT.ORIFICIO CUAD.Z-24 TAPA SOP. TRANSM. M80 SOPORTE TRANSMISIN M80 S ARANDELA 14 X36 X3 ZN PASADOR 3 X20 1336 ZN TUERCA 6 UNI 5588 6.8 ZN

ROUE DENTEE Z-24 M80 RON.M14 15X 28X2,5 U6592 ZB GOUPILLE 4 X25 1336 ZN POIGN+E SPEEDY SET

ZAHNRAD Z-24 M80 SCH.M14 15X 28X2,5 U6592 ZB SPLINT 4 X25 1336 ZN GRIFF SPEEDY SET

RUEDA DENTADA Z-24 M80 ARA.M14 15X 28X2,5 U6592 ZB PASADOR 4 X25 1336 ZN EMPUÐADURA SPEEDY SET

FICHE EL. 5 X24 DIN 1481

SPANNSTIFT 5 X24 DIN 1481

CLAVIJA EL.5 X24 DIN 1481

GOUJON 5X12 UNI 5927 VIS 6x10 5933 10.9 ZN ENGRENAGE Z 15 SUPPORT ECROU M 6X 1 U5588 VIS M6 X1 X12 U5739 A2 IX VIS 3,9X 9,5 DIN 7981

STIFT 5X12 UNI 5927 SCHRAUBE 6x10 5933 10.9 ZN ZAHNRAD Z 15 HALTERUNG MUTTER M 6X 1 U5588 SCHRAUBE M6X1X12 U5739 A2 IX SCHRAUBE 3,9X 9,5 DIN 7981

TORNILLO SIN CABEZA 5X12 5927 TORNILLO 6x10 5933 10.9 ZN ENGRANAJE Z 15 SOPORTE TUERCA M 6X 1 U5588 TORNILLO M6X1 X12 U5739 A2 IX TORNILLO 3,9X 9,5 DIN 7981

RESSORT SPEC. REGL. EP. ENTRAI MANCHON DE REGLAGE GCH

SPEZIALFEDER STREUEREINSTELLUN EINSTELLMUTTER LINKS

MUELLE ESPEC. REGUL. ABONADORA ROSCA REGULACION IZQUIERDA

CR+MAILL+RE VIS M4X 0,7X10 U7688 A2 IX

ZAHNSTANGE SCHRAUBE M4X 0,7X10 7688 A2 IX

CREMALLERA TORNILLO M4X0.7X10 U7688 A2 IX

FICHE EL. 4 X24 DIN 1481

SPANNSTIFT 4 X24 DIN 1481

CLAVIJA EL.4 X24 DIN 1481

ECROU AUTOB.NOR.10

SELBSTSP. MUTTER NOR. 10

TUERCA AUTOB. NOR. 10

SUPPORT MICROGRANULATEUR VIS 10X25 5739 8.G ZN ECROU M10X 1,5 U5588 6.8 ZN CAVALIER SUPPORT DISQUE SV

HALTERUNG MICRO SCHRAUBE 10X25 5739 8.G ZN MUTTER M10X 1,5 U5588 6.8 ZN VERBINDUNG SCHEIBENHALTERUNG S

SOPORTE MICRO TORNILLO 10X25 5739 8.G ZN TUERCA M10X 1,5 U5588 6.8 ZN PERNO EN U SOP. DISCO SV

RONDELLE 10,5X30 RONDELLE M6 6,4X18X2 U6593 IX

SCHEIBE 10,5X30 SCHEIBE M6 6,4X18X2 U6593 IX

ARANDELA 10,5X30 ARANDELA M6 6,4X18X2 U6593 IX

CORPS DISTRIBUTION M80 ENGRENAGE TROU CARREE Z-14 M80 RONDELLE 30X0-5X22 ACIER PIGNON CONIQUE Z-14 M80 ROND.PLATE 4-3X 16X1-5 6593 ZN

VERTEILUNGSKTRPER ZAHNRAD VIERKANTLOCH Z-14 M80 UNTERLEGSCHEIBE 30X0-5X22 ACC. KEGELRITZEL Z-14 M80 SCHEIBE 4-3X 16X1-5 6593 ZN

CUERPO DISTRIBUCIN M80 C ENGRAN.ORIFICIO CUADRADO Z-14 ARANDELA 30X0-5X22 ACC. PI¾N CNICO Z-14 M80 PI ARAND. PLANA 4-3X 16X1-5 6593

Serbatoio PLASTICA 30 litri PLASTIC hopper 30 liters

TAV. 251

77 68 50

OPTIONAL

63 58 57

11 18 44

40 48

10 12

1 32

3 6

23 22

37 31

7 9

3U 19

24 28 29

67 55 56

54 74 75

(*) Kit = (2+2 pz.)

64 53 52 15

38 - 2U 33 - 3U 39 - 2U 34 - 3U

26 29

69 73

cod. G19531191

TAV. 251

MICROGRANULATORE Pos.

Cod.

56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77

F01030180 G19001802 G66248188 G66248189 G66248191 G19006390 G65336046 G20890158 G20890211 G22250240 G17176430 G66248154 G65336041 F01220011 F01420036 F01020404 G18904290 G17772000 F01020436 F01410051 F02300016 G19707990

Descrizione

Description

VITE M 4X X 10 U7380 A2 IX RONDELLA-ALBERO MICRO ANIMA DOSATORE M80 DOSATORE M80 PERNO ASSE UNIVERSALE M80 COPERCHIO DISTR.MICRO SPEEDY S MOLLA SPEC.ZN SCIVOLO M80 DOSATORE MICRO COMPL. KIT INGRANAGGI DISTRIB.MICRO DOSATORE COMPL. SV TUBO DISCESA MICRO L.960 COMPL SCIVOLO DISTR. M80 MOLLA SPEC.ZN STRINGITUBO M80 DADO M 6X 1 D980 8 ZN ROS.M6 6,4X 18X 2 U6593 ZN VITE M6X1X20 U5739 8.8 ZN MOLLA GUIDA TUBO DISC.MICRO ZN ASS.TUBO MICROGRANULATORE VITE M 8X1,25X 20 U5739 8.8 ZN ROS.M8 8,4X 17X1,6 U6592 ZN FASCETTA STRING. 16/27 H.8 DECAL.DISTRIB.MICRO 30L MAGR22

BOLT M 4X X 10 U7380 A2 IX WASHER-SHAFT MICRO INSERTED ROLLER SEED METERING SEED METERING DEVICE M80 PIN UNIVERSAL AXLE M80 DISTR.TOR COVER MICRO SPEEDY S SPEC SPRING ZN CHUTE M80 ROTOR DIST. MICRO 20 GROOVES DISTRIBUTION GEAR KIT MICRO DOSIFICADOR COMPL. SV PIPE MICRO DESCENT L960 CHUTE- DISTRIB. M80 SPEC.SPRING ZN . PIPE CLAMP M8 NUT M6X1 D980 8 ZN FLAT WASHER 6-6X 18X2 6593 ZN BOLT M 6X 1X20 U5739 8.8 ZN MICRO GUIDE SPRING ASSY MICROGR. TUBE BOLT M8X1,25X20 U5739 8.8 ZN WASHER M8 8,4X17X1,6 U6592 ZN STRING FASTEN.STRAPS 16/27 H.8 LAB.DISTR.MICRO 30L MAGR22

cod. G19531191

Description

Benennung

Descripcion

AME DOSEUR M80 DOSEUR M80 PIVOT AXE UNIVERSEL M80

DOSIERERKERN M80 DOSIERER M80 ZAPFEN UNIVERSALACHSE M80

MACHO DOSIFICADOR M80 DOSIFICADOR M80 PERNO EJE UNIVERSAL M80

RESSORT SPEC. ZN LANCOIR M80 ROTOR DOSEUR 20C MICRO COMPL.

SPEZIALFEDER ZN RUTSCHE M80 DOSIERER MIKRO KOMPL. 20 SEKT

MUELLE ESPEC. ZN PLANO INCLINA DOSIFICADOR MICRO COMPL.20 SEC KIT ENGRANAJES DISTRIB.MICRO

ENTONNOIR DOSEUR MINIMAX MICRO RESSORT SPEC. ZN SERRE-TUBE M8 ECROU M6X1 D980 8 ZN ROND. PLATE 6-6X 18X2 6593 ZN VIS M 6X20 RESSORT GUIDE MICRO

SAAPPARAT RUTSCHE M80 SPEZIALFEDER ZN ROHRSCHELLE M8 MUTTER M6X1 D980 8 ZN SCHEIBE 6-6X 18X2 6593 ZN SCHRAUBE M 6X20 FsHRUNGSFEDER MIKRO

PLANO INCLINADO DISTR. M80 MUELLE ESPEC. ZN APLASTA TUBOS TUERCA M6X1 D980 8 ZN ARAND. PLANA 6-6X 18X2 6593 ZN TORNILLO M 6X20 MUELLE GUID.MICRO

VIS M8X1,25X20 U5739 8.8 ZN RONDEL. M8 8,4X17X1,6 U6592 ZN

SCHRA. M8X1,25X20 U5739 8.8 ZN SCHEIBE M8 8,4X17X1,6 U6592 ZN

TORN. M8X1,25X20 U5739 8.8 ZN ARANDELA M8 8,4X17X1,6 U6592ZN

TAV. 261

43 71

28 8

58 59

8 42

48 5

39 - Z42 23

53 54 (*)

35 34 - Z15

37 15 14

32 - Z20 33 38

12 48

7 13

46 31

33 26

11 5

22 21

L. 500 - 51

18 - Z10

24 31 36

9 - Z15 10 - Z20

66 8 67 5

25 - L. 250

65 2

56 64

8 11

1 12

13 14 15

(*) Kit = 2+2 pz. (16x16) 16 - Z13 19 18 - Z10 66

21 22

cod. G19531191

TAV. 261

TRASMISSIONE SPANDICONCIME E MICROGRANULATORE Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71

F01220022 G22505085 F02200452 G22230094 G14830390 G17132170 F01020432 G66248218 G22250028 G22250007 F01060048 G18801680 G66248207 F01420048 F01200244 G15131050 G20970125 G22250006 F01020406 G17132160 F01410037 F01020404 F01200232 F06080056 G22270143 F01410064 F06220018 G17131340 F02250683 G17131090 F01220022 G22250047 G15430501 G22250050 G22250287 G22230086 F06080030 F06080099 G20890128 G17175560 F01020403 F01430047 G16033200 G15175071 G17175590 G17175600 G19002840 G18803090 F01020088 F01020040 G22270127 G22220102 G22220103 G22270389 G18700510 F01200306 F01100011 G22220073 G66349001 G22270452 F02100110 F01220011 F01020404 G20970142 F01020445 F02250681 G17132180 G17132190 F01200270 F20110706 F01410051

Descrizione

Description

Benennung

Descripcion

DADO M 8X1,25 D980 8 ZN FERMO ASSE IN LAMIERA SPINA SCATTO D.4,4 B/80 ZN BEARING SUPPORT CUSCINETTO FORO QUADRO SUPPORTO TRASM.RUOTA SPA-MIC VITE M 8X1,25X16 U5739 8.8 ZN RONDELLA DISTAN.SPANDI PIGNONE Z-15 SV INGR.CON MOZZO 1/2 Z-20 SV VITE M8X1,25X50 U5732 4.6 ZN BOCCOLA 11 X25 X7,5 ZN TENDICATENA SPAND. SP-520 ROS.M8 8,4X 24X 2 U6593 ZN DADO M 8X1,25 U5588 6.8 ZN PIGNONE Z13 RONDELLA 28X2,5X6,5 INGR.CON MOZZO 1/2 Z-10 SV VITE M6X1X25 U5739 8.8 ZN CARTER TRASMISSIONE INF. ROS.M6 6,4X12,5X1,6 U6592 ZN VITE M6X1X20 U5739 8.8 ZN DADO M 6X 1 U5588 6.8 ZN SP.CAT.1/2-3/16 105M.ISO 083-1 ASSE SUP.CAMBIO L.250 SP ROS.M10 10,5X 20X 2 U6592 ZN VOLANTINO 3LOBI D.65-M8X15 CARTER INSERTO FIL.M 8X17,5 ZN T.TOND RINVIO MICRO DADO M 8X1,25 D980 8 ZN GEARBOX RING GEAR Z-20 S DISTANZIALE INTERNO CAMBIO GEARBOX RING GEAR Z-15 S MANICOTTO DISTANZIALE SV SUPPORTO CUSCINETTO TAGLIATO CATENA 1/2 ISO 083 62 MAGLIE CATENA 1/2 ISO 084 51 MAGLIE CORONA Z-42 SP MOZZO INGRANAGGIO ACCORCIATO VITE M6X1X16 U5739 8.8 ZN ROS.M6 6,4X 11X0,7 U8842J ZN MONT.SCATOLA RINVIO Q.16 PLA > SUPPORTO ASSI TRASM.MICRO TUBO TRASMISSIONE ESTERNO TUBO TRASMISSIONE INTERNO COPRICARDANO SUPERIORE BOCCOLA 9X16X60 ZN VITE M 8X1,25X90 U5737 8.8 ZN VITE M6X1X40 U5737 8.8 ZN ASSE RUOTA CAMBIO 2F.L.500 SP CONCHIGLIA DX CONCHIGLIA SX 2+2 INGR.SCATOLA DI RINVIO > RONDELLA 31 X40 X0,6 ZN DADO M14X 2 U5588 6.8 ZN ING.M 6X1 7663-A 9SMNPB28 ZN RONDELLA 28X0,3X16,5 BOCCOLA ALBERO SCATOLA RINVIO SP/S SPINA E.P. 6X 26 U6873 C70 BR DADO M 6X 1 D980 8 ZN VITE M6X1X20 U5739 8.8 ZN RONDELLA 32X4X15,5 VITE M8X1,25X30 U5739 8.8 ZN INSERTO FIL.M 6X14 ZN T.TONDA SUPPORTO RINVIO TRASM.SUP. CARTER RINVIO SUP. DADO M10X 1,5 U5588 6.8 ZN CAV.Q.B=35 M=10X1,5 L=60 ROS.M8 8,4X 17X1,6 U6592 ZN

NUT M8X 1,25 D980 8 ZN PLATE AXLE STOP SNAP PIN D4,4 B/80 ZN BEARING SUPPORT SQUARE-HOLED BEARING WHEEL TRASM.SUPPORT BOLT M8X 1.25X16 U5739 8.8 ZN MAN. SPR. SPACER WASHER Z-15 PINION SV GEARS- W/ HUB 1/2 Z-20 SV BOLT 8 X50 5732 4.6 GALVANIZ. BUSHING 11X25X7,5 GALVA CHAIN TENSIONER WASHER M8 8,4X 24X 2 U6593 ZN NUT M8 X1,25 U5588 6.8 ZN Z-13 PINION WASHER 28X2-5X6-5 GEARS- W/ HUB 1/2 Z-10 SV BOLT M6X 1X 25 U5739 8.8 ZN LOWER TRANSMISSION CASE PLANE WASHER D.6 BOLT M 6X 1X20 U5739 8.8 ZN NUT 6 UNI 5588 6.8 GALVANIZED CHAIN 1/2-3/16 ISO 083-1 105 L AXLE- UPPER- GEARBOX L.250 SP WASHER M10 10,5X20X2 U6592 ZN 3-LOBE HANDWHEEL D.65-M8X15 CARTER CYLINDRICAL NUT 8 TC 40 TRANSMISSION MICRO NUT M8X 1,25 D980 8 ZN GEARBOX RING GEAR Z-20 SV GEARBOX INNER SPACER GEARBOX RING GEAR Z-15 SV SPACER SLEEVE SV CUT BEARING SUPPORT CUT-DOWN CHAIN .1/2 ISO 083 62 CHAIN 1/2-3/16 51 LINKS.DIN 81 RING GEAR Z-42 SP

ECROU M8X 1,25 D980 8 ZN ARRET AXE EN TOLE FICHE A DETENTE D4,4 B/80 ZN SUPPORT PALIER ROULEMENT AL+SAGE CARR+

MUTTER M8X 1,25 D980 8 ZN FESTSTELLVORRICHTUNG BLECHACHS EINRASTSTIFT D4,4 B/80 ZN LAGERBsCHSE VIERKANTLAGER

TUERCA M8X 1,25 D980 8 ZN BLOQUEO EJE DE CHAPA CLAVIJA DE MUELLE D4,4 B/80 ZN SOPORTE COJINETE COJINETE ORIFICIO CUADRADO

VIS M 8X16 RONDELLE ENTRETOISE EP. ENGRAI PIGNON Z-15 SV ENGRENAGE 1/2 Z-20 VIS 8 X50 5732 4.6 ZN BOITE 11X25X7,5 ZN TENDEUR DE CHAINE EPAND. ENGR. RONDELLE M8 8,4X 24X2 U6593 ZN ECROU M8 X1,25 U5588 6.8 ZN PIGNON Z13 RONDELLE 28X2-5X6-5 ENGRENAGE AVEC MOYEU 1/2 Z-10 VIS M 6X25

SCHRAUBE M 8X16 ABSTANDSCHEIBE DsNGERSTREUER RITZEL Z-15 SV ZAHNRAD MIT NABE 1/2 Z-20 SV SCHRAUBE 8 X50 5732 4.6 ZN BsCHSE 11X25X7,5 ZN KETTENSPANNER DsNGERSTR. SP-52 SCHEIBE M8 8,4X 24X 2 U6593 ZN MUTTER M8 X1,25 U5588 6.8 ZN RITZEL Z-13 UNTERLEGSCHEIBE 28X2-5X6-5 ZAHNRAD MIT NABE 1/2 Z-10 SV SCHRAUBE M 6X25

TORNILLO M 8X16 ARANDELA DISTAN.ABONAD. PI¾N Z-15 SV P ENGRAN.CON PERNO 1/2 Z-20 SV TORNILLO 8x50 5732 4 6 ZN CASQUILLO 11X25X7,5 ZN TENSOR DE CADENA ABON. SP-520 ARANDELA M8 8,4X 24X2 U6593 ZN TUERCA M8 X1,25 U5588 6.8 ZN PI¾N Z13 P ARANDELA 28X2-5X6-5 ENGRAN.CON PERNO 1/2 Z-10 SV TORNILLO M 6X25

RONDELLE D.6 VIS M 6X20 ECROU 6 UNI 5588 6.8 ZN

SCHEIBE D.6 SCHRAUBE M 6X20 MUTTER 6 UNI 5588 6.8 ZN

ARANDELA D.6 TORNILLO M 6X20 TUERCA 6 UNI 5588 6.8 ZN

AXE SUP. BOITE DE VITESSE RONDELL.M10 10,5X20X2 U6592 ZN

ACHSE OBEN GETRIEBE L.250 SP SCHEIBE M10 10,5X20X2 U6592 ZN

EJE SUP.CAMBIO L.250 SP ARAND. M10 10,5X20X2 U6592 ZN

ECROU CYLINDRIQUE 8 TC 40

ZYLINDRISCHE MUTTER 8 TC 40

TUERCA CILINDRICA 8 TC 40

ECROU M8X 1,25 D980 8 ZN COURONNE BOITE DE VITESSE ENTRETOISE INT. BOITE VITESSE COURONNE BOITE DE VITESSE MANCHON ENTRETOISE SV SUPPORT PALIER COUPE TR. CH.1/2 ISO 083 62 MAILLES CHAINE 1/2-3/16 51M.DIN 8187 COURONNE Z-42 SP

MUTTER M8X 1,25 D980 8 ZN GETRIEBEKRANZ Z-20 SV INNERES DISTANZSTsCK GETRIEBE GETRIEBEKRANZ Z-15 SV ABSTANDSMUFFE SV HALTERUNG LAGER MIT SCHNITT KETTENLZNGE 1/2 ISO 083 62 GL KETTE 1/2-3/16 51 G.DIN 8187 KRANZ Z-42 SP

TUERCA M8X 1,25 D980 8 ZN CORONA CAMBIO Z-20 SV DISTANCIADOR INTERIOR CAMBIO CORONA CAMBIO Z-15 SV MANGUITO DISTANCIADOR SV SOPORTE COJINETE CORTADO TRECHO CADENA 1/2 ISO 083 62 E CADENA 1/2-3/16 51 ESLAB.DIN 8 CORONA Z-42 SP

VIS M6X1X16 U5739 8.8 ZN RONDELLE D6 DIN 6798 D. INT. Z BOITE RENVOI

SCHRAUBE M6X1X16 U5739 8.8 ZN UNT. SCHEIBE D6 DIN 6798 D. IN VORGELEGEGEHZUSE

TORNILLO M6X1X16 U5739 8.8 ZN ARANDELA D6 DIN 6798 D.INT.ZN CAJA DE DISTRIBUCIN

COUVRE-CARDAN SUPERIEUR

OBERE KARDANABDECKUNG

CUBRECARDæN SUPERIOR

VIS M8X1,25X90 U5737 8.8 ZN VIS 6 X40 5737 8.G ZN AXE ROUE BOITE DE VITESSE COQUILLE DRT.

SCHR.M8X1,25X90 U5737 8.8 ZN SCHRAUBE 6 X40 5737 8.G ZN GEBTRIEBERADACHSE 2R.L.500 SP SCHALE RECHTS

TORN. M8X1,25X90 U5737 8.8 ZN TORNILLO 6 X40 5737 8.G ZN EJE RUEDA CAMBIO 2 FILAS. L.50 MOLDE DER.

COUPLE CON RENV ANGLE (2+2)

2+2 ZAHNRZDER VORGELEGEGEHZUSE 2+2 ENGRANAJES CAJA DE LA TRAN

ECROU M14X2 GRAISS. A BILLE M6X1 7663A ZN RONDELLE 28X0-3X16-5 BOITE ARBRE TRANSMISSION SP/S FICHE EL.6 X26 DIN 1481 ECROU M6X1 D980 8 ZN VIS M 6X20 RONDELLE 32X4X15-5 VIS M 8X30 INSERT FILET+ M6X14 ZN

MUTTER M14X2 SCHMIERBUECHE M6X1 7663-A ZN UNTERLEGSCHEIBE 28X0-3X16-5 B_CHSE WELLE VORGELEGEGEHZUSE SP/S SPANNSTIFT 6 X26 DIN 1481 MUTTER M6X1 D980 8 ZN SCHRAUBE M 6X20 UNTERLEGSCHEIBE 32X4X15-5 SCHRAUBE M 8X30 GEWINDEBUCHSE M6X14 ZN

DADO M14X2 ENGRAS. DE ESFERAS M6X1 7663-A ARANDELA 28X0-3X16-5 CASQUILLO æRBOL CAJA DE TRANSMISIN SP/SA CLAVIJA EL.6 X26 DIN 1481 TUERCA M6X1 D980 8 ZN TORNILLO M 6X20 ARANDELA 32X4X15-5 TORNILLO M 8X30 INSERTO FILETT.M6X14 ZN

ECROU M10X 1,5 U5588 6.8 ZN CAVALIER SUPPORT DISQUE SV RONDEL. M8 8,4X17X1,6 U6592 ZN

MUTTER M10X 1,5 U5588 6.8 ZN VERBINDUNG SCHEIBENHALTERUNG S SCHEIBE M8 8,4X17X1,6 U6592 ZN

TUERCA M10X 1,5 U5588 6.8 ZN PERNO EN U SOP. DISCO SV ARANDELA M8 8,4X17X1,6 U6592ZN

cod. G19531191

BOLT M6X1X16 U5739 8.8 ZN WASHER D6 DIN 6798 D.INT.GALV. TRANSFER CASE TUBE TRANSMISSION EXTERN INNER TUBE TRANSMISSION TOP CARDAN JOINT COVER BUSHING 9X16X60 ZN BOLT M8X1,25X90 U5737 8.8 ZN BOLT M6X 1X40 U5737 8.8 ZN WHEEL AXLE - GEARBOX 2-ROW L. RIGHT SHELL LEFT SHELL 2+2 INTERM. TRANSM. GEAR BOX GROWER 32 X 40 X 0,6 ZN NUT M14X2 GREASE NIPPLE M6X1 7663-A ZN WASHER 28X0-3X16-5 BUSHING INTERMEDIATE BOX SHAFT PIN EL. 6 X26 DIN 1481 NUT M6X1 D980 8 ZN BOLT M 6X 1X20 U5739 8.8 ZN WASHER 32X4X15-5 BOLT M 8X30 THREADED INSERT M6X14 ZN INTERM. TRANSM. SUPPORT TRASM.CASE NUT M10X 1,5 U5588 6.8 ZN U BOLT Q.B=35 M=10X1,5 L=60 WASHER M8 8,4X17X1,6 U6592 ZN

TAV. 271 1 6

5 11 19

4 7

9 8

10 - Red / Yellow (564x282) (pair of warning boards)

3 14 - Red / White (423x423)) (pair of warning boards)

13 - Red / White (423x282) (pair of warning boards)

cod. G19531191

TAV. 271

ACCESSORI Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

F01200232 G15211760 G13616620 G13616570 F01090215 F01020403 F01220011 F01410037 F05010221 F05010357 F05010076 F05010080 F05010591 F05010590

Descrizione

Description

Benennung

Descripcion

DADO M 6X 1 U5588 6.8 ZN SUPPORTO LUCI POST. KIT LUCI PER MACCHINE PORTATE PIASTRA SUPP.LUCI VITE M 8X1,25X15 U5449 5.8 ZN VITE M6X1X16 U5739 8.8 ZN DADO M 6X 1 D980 8 ZN ROS.M6 6,4X12,5X1,6 U6592 ZN CATARIFRANGENTE TONDO D.80 > N.2 PANNELLI CARICHI SPORGENTI FANALE X KIT LUCI CABLAGGIO PER KIT LUCI PANNELLI CAR.SPORG.423X282 PANNELLI CAR.SPORG.423X423

NUT 6 UNI 5588 6.8 GALVANIZED LIGHTS SUPPORT

ECROU 6 UNI 5588 6.8 ZN SUPPORT ECLAIRAGE

MUTTER 6 UNI 5588 6.8 ZN LICHTERHALTERUNG

TUERCA 6 UNI 5588 6.8 ZN SOPORTE LUCES

VIS 8X15 UNI 5449 5.8 ZN VIS M6X1X16 U5739 8.8 ZN ECROU M6X1 D980 8 ZN RONDELLE D.6

SCHRAUBE 8X15 UNI 5449 5.8 ZN SCHRAUBE M6X1X16 U5739 8.8 ZN MUTTER M6X1 D980 8 ZN SCHEIBE D.6

TORNILLO 8X15 UNI 5449 5.8 ZN TORNILLO M6X1X16 U5739 8.8 ZN TUERCA M6X1 D980 8 ZN ARANDELA D.6

N.2 PANNEAUX CHARGES SAILLANT FEU KIT ECLAIRAGE COMPL. CABLAGE KIT PHARES PANNEAUX REFLECHISSANT 423X282

N.2 TAFELN VORSPRINGENDE LADUN LAMPEN KIT LICHT KOMPL. VERKABELUNG LAMPENKIT WARNTAFEL 423X282

2 PANELES CARGADOS SALIENTES FAROL SET LUCES COMPL. CABLEADO JUEGO LUCES ADVERTENCIA BORDO 423X282

cod. G19531191

LIGHTS PLATE SUPPORT BOLT 8X15 UNI 5449 5.8 GALVANI BOLT M6X1X16 U5739 8.8 ZN NUT M6X1 D980 8 ZN PLANE WASHER D.6 ROUND REFLECTOR D.80 N.2 JUTTING LOAD PANELS LAMP KIT LIGHTS COMPL. LIGHT WIRING HARNESS WARNING BOARD 423X282 REFLECT PANELS 423X423

TAV. 281 Classe - Size B

Descrizione - Description

min.

max.

CARD.B1 Z6-Z6 L700 CARD.B1 Z8-Z6 L700 CARD.B1 Z20-Z6 L700 CARD.B1 Z8-Z6 L900 R.LIB CARD.B1 Z6-Z6 L900 R.LIB CARD.B2 Z6-Z6 L900 CARD.B3 Z8-Z6 L1300 CARD.B1 Z20-Z6 L900 R.L CARD.R4 Z20-Z6 L1210 OM-RL CARD.B3 Z6-Z6 L1200

700 700 700 900 900 900 1300 900 1210 1200

1100 1100 1100 1400 1400 1400 2000 1400

Codice - Code F08011711 F08011713 F08011714 F08011715 F08011716 F08011719 F08011720 F08011757 F08011764 F08011930

1700

Forcelle - Yokes (**)

Tipo - Type (*)

(A x B)

B1 (22 x 54) B1 (22 x 54) B1 (22 x 54) B1 (22 x 54) B1 (22 x 54) B2 (23,8 x 61,3) B3 (27 x 70) B1 (22 x 54) R4 (27 x 74,6) B3 (27 x 70)

A A A A A A A A A A

A A A B B B A B C A

Z6 (1"3/8)

Z6 (1"3/4)

Z8 (32x38)

Z20 (1"3/4)

Z21 (1"3/8)

G58161015 G58161015 G58161015 G58161015 G58161015

F08011772 F08011772 F08011772 F08011772 F08011772

F08011742 F08011742 F08011742 F08011742 F08011742

F08011758 F08011758 F08011758 F08011758 F08011758

F08011767 F08011767 F08011767 F08011767 F08011767

G58161016 F08011743 G58161015 F08011772 F08011742 F08011758 F08011767 F08011768 F08011766 F08011774 F08011773 G58161016 F08011743

(*)

RUOTA LIBERA OVERRUNNING CLUTCH

GIUNTO STANDARD STANDARD JOINT

38.10 38.00

44,37 44,32

44,45 44,42

34,87 34,82

34.93 34.90

5.99 5.96

91 31.9 66 31.9

36,25 36,00

37,82 37,77

Z21 (1"3/8)

44,27 44,12

34,97 34,92

Z20 (1"3/4)

45,29 45,03

6.03 6.00

2 32.0 0 32.0

28,14 27,89

29.72 29.67

Z8 (32x38) 11,00 10,95

11,13 11,07

8,64 8,59

8.74 8.69

40,28 40,13

GIUNTO OMOCINETICO CONSTANT VELOCITY JOINT

Z6 (1"3/4)

Z6 (1"3/8)

F08010152

39,21

34,88 34,85

(**)

KIT PRESSORE/BUSSOLA - KIT PUNCH/ROOT

37.69 37.53

Lunghezze Lengths

31,82 31,75

31,30

cod. G19531191

TAV. 281

CARDANI Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

F08010152 F08011711 F08011713 F08011714 F08011715 F08011716 F08011719 F08011720 F08011742 F08011743 F08011757 F08011758 F08011764 F08011766 F08011767 F08011768 F08011772 F08011773 F08011774 F08011930 G58161015 G58161016

Descrizione

Description

KIT PRESSORE BUSSOLA CAT I-IV> CARD.B1 Z6-Z6 L700 CARD.B1 Z8-Z6 L700 CARD.B1 Z20-Z6 L700 CARD.B1 Z8-Z6 L900 R.LIB CARD.B1 Z6-Z6 L900 R.LIB CARD.B2 Z6-Z6 L900 CARD.B3 Z8-Z6 L1300 FORCELLA CARD.32X38 Z8 B1 FORCELLA CARD.32X38 Z8 B3 CARD.B1 Z20-Z6 L900 R.L > FORCELLA CARD.1''3/4 Z20 B1 > CARDANO OM 3/4Z20-RL Z6 L1381 FORCELLA CARD.32X38 Z8 R4 FORCELLA CARD.1 3/8 Z21 B1 > FORCELLA CARD.1 3/8 Z6 R4 FORCELLA CARD.1''3/4 Z6 B1 > FORCELLA CARD.1 3/8 Z21 R4 > FORCELLA CARD.1 3/4 Z20 R4 CARD.B3 Z6-Z6 L1200 FORCELLA CARD.1'3/8 Z6 B1 FORCELLA CARD.1'3/8 Z6 B3 >

TOOLS FOR PTO YOKE CAT I-IV PTO SHAFT B1 Z6-Z6 L700 PTO SHAFT B1 Z8-Z6 L700 PTO SHAFT B1 Z20-Z6 L700 CARD.B1 Z8-Z6 L900 FREE W. CARD.B1 Z6-Z6 L900 R.LIB UNIVERSAL JOINT 102 071 N T07 UNIV.JOINT B3 Z8-Z6 L1300 YOKE CARD.32X38 Z8 B1 YOKE CARD.32X38 Z8 B3 UNIVERSAL JOINTB1 Z20-Z6 L900 CARD.FORK 1''3/4 Z20 B1 > CARD.R4 Z20-Z6 L1381 OM-RL FORK 32X38 Z8 R4 CARD.FORK 1 3/8 Z21 B1 > FORK 1 3/8 Z6 R4 YOKE 1" 3/4 Z6 B1 FORK 1 3/8 Z21 R4 CARD. FORK 1 3/4 Z20 R4 PTO SHAFT B3 Z6-Z6 L1200 CARD. FORK 1'3/8 Z6 B1 CARD.FORK 1'3/8 Z6 B3 >

cod. G19531191

Description

Benennung

Descripcion

CARD ROUE LIBRE T100710 112R12 CARD. 102 071 N T07 T07 1 CAT

KARDAN CE T100710 112 R12 KARDAN 102 071 N T07 T07 1CAT

CARDAN CE T100710 112 R12 CARDæN 102 071 N T07 T07 1CAT

FOURCHETTE CARDAN Z8 B1

GABEL KARDAN Z8 B1

HORQUILLA CARDAN Z8 B1

USATE SEMPRE RICAMBI ORIGINALI ALWAYS USE ORIGINAL SPARE PARTS IMMER DIE ORIGINAL-ERSATZTEILE VERWENDEN EMPLOYEZ TOUJOURS LES PIECES DE RECHANGE ORIGINALES UTILIZAR SIEMPRE REPUESTOS ORIGINALES

Servizio Assistenza Tecnica - After Sales Service Servizio Ricambi - Spare Parts Service +39 0434 695410 DEALER:

*G19531191*           info@maschio.ru

MASCHIO GASPARDO SpA Registered Office and Production Plant Via Marcello, 73 - 35011 Campodarsego (Padova) - Italy Tel. +39 049 9289810 Fax +39 049 9289900 info@maschio.com www.maschionet.com

MASCHIO DEUTSCHLAND GMBH Äußere Nürmberger Straße 5 D - 91177 Thalmässing - Deutschland Tel. +49 (0) 9173 79000 Fax +49 (0) 9173 790079 dialog@maschio.de www.maschionet.de

MASCHIO FRANCE Sarl 1, Rue de Mérignan ZA F - 45240 La Ferte St. Aubin France Tel. +33 (0) 2.38.64.12.12 Fax +33 (0) 2.38.64.66.79 info@maschio.fr

MASCHIO GASPARDO SpA Production Plant Via Mussons, 7 - 33075 Morsano al Tagliamento (PN) - Italy Tel. +39 0434 695410 Fax +39 0434 695425 info@gaspardo.it

MASCHIO-GASPARDO USA Inc 120 North Scott Park Road Eldridge, IA 52748 - USA Ph. +1 563 2859937 Fax +1 563 2859938 info@maschio.us

MASCHIO-GASPARDO ROMANIA S.R.L. MASCHIO IBERICA S.L. MASCHIO-GASPARDO POLAND Strada Înfrátirii, F.N. MASCHIO-GASPARDO UCRAINA 315100 Chisineu-Cris (Arad) -România GASPARDO-MASCHIO TURCHIA Tel. +40 257 307030 MASCHIO-GASPARDO CINA Fax +40 257 307040 MASCHIO-GASPARDO INDIA info@maschio.ro MASCHIO-GASPARDO KOREA Research & Development MASCHIO GASPARDO S.p.A.