Gaspardo MTE Parts Manual G19530265 - PDF by www.heydownloads.com

MTE Cod:

G19530265

09.2006

IT EN DE FR ES

PARTI DI RICAMBIO SPARE PARTS ERSATZTEILE PIECES DÉTACHÉES PIEZAS DE REPUESTO

ITALIANO

ENGLISH

DEUTSCH

FRANÇAIS

ESPAÑOL

PARTI DI RICAMBIO

SPARE PARTS

ERSATZTEILE

PIECES DÈTACHÈES

RESPUESTOS

Le ordinazioni delle parti di ricambio vanno fatte presso i nostri concessionari di zona e devono essere sempre corredate dalle seguenti indicazioni:

Orders must be transmitted through our area dealers and should always include the following indications:

Die Bestellungen müssen bei unseren Gebietshändrer aufgegeben werden. Bei der Bestellung sind stets die folgenden Angaben zu machen:

Les ordres doivent être effectués auprés de nos concessionaires de zone en précisant les indications suivantes:

Los pedidos han de efectuarse en nuestros consesionarios de zona y deben incluir siempre las siguientes indicaciones:

- Tipo, modello e numero di matricola dell’attrezzatura. Tali dati sono stampigliati nell’apposita targhetta di cui è dotata ogni attrezzatura.

- Type, model and serial number of the machine. These data are punched on the data plate with which every implement is equipped.

- Typ, Modell und Serien-Nummer des Geräts. Diese Daten stehen auf dem Typenschild, mit dem jedes Gerät versehen ist.

- Type, modéle et numéro de série de la machine. Ces données sont gravées sur la plaque d’identification de chaque outil.

- Tipo, modelo y número de matrícula del equipo. Dichos datos están impresos en la relativa placa presente en el equipo.

- Numero di codice della parte richiesta rilevabile dal catalogo ricambi.

- Code number of the required spare part. This will be found in the spare parts catalogue.

- Artikel Nr. der erforderlichen Ersatzteile. Diese stehen im Ersatzteil-Katalog.

- Numéro de code de la piéce détachée indiqué sur le catalogue des piéces détachées.

- Número de código de la parte requerida presente en el catálogo respuestos.

- Descrizione del particolare e quantità richiesta.

- Description of the part and required quantity.

- Beschreibung des Ersatzteils und die erforderliche Stückzahl.

- Description de la piéce et quantité requise.

- Descripcíon de la pieza y cantidad requerida.

Numero della tavola.

Table number.

Tafelnummer.

Numéro de plan.

Numero de illustración.

- Mezzo di trasporto. Nel caso questa voce non sia specificata, la Ditta Costruttrice, pur dedicando a questo servizio una particolare cura, non risponde di eventuali ritardi di spedizione dovuti a cause di forza maggiore. Le spese di trasporto si intendono sempre a carico del destinatario. La merce viaggia a rischio e pericolo del committente anche se venduta franco destino.

- Means of dispatch. If this item is not indicated, the Manufacturer, while dedicating particular care to this service, shall not be held responsible for delays in delivery caused by cases of force majeure. Transport expenses shall always be at the consignee’s charge. The goods travel at the purchaser’s risk and peril even when sold ex destination.

- Versandmittel. Wenn dieser Punkt nicht spezifiziert wird, haftet die Herstellerfirma nicht für etwaigen Lieferverzug aufgrund höherer Gewalt, auch wenn er diesen Service besonders aufmerksam abwickelt. Die Frachtkosten gehen dagegen immer zu Lasten des Empfängers. Die Ware reist auf Gefahr und Risiko des Auftraggebers, auch wenn frei Haus Verkauft vereinbart worden ist.

- Moyen d’expédition. Si cette rubrique n’est pas indiquée, le Constructeur, bien que soucieux de ce service, ne répond pas des retards d’expédition pour des causes de force majeure. Les frais de transport sont toujours à la charge du destinataire. La marchandise voyage aux risques et périls de l’acheteur même si vendue franco de port.

- Medio de transporte. En caso que este ítem no esté especificado, el Fabricante, aún prestando la debidas consideraciones para este aspecto, no responde por eventuales retardos de env’o debidos a causas de fuerza mayor. Los gastos de transporte se consideran siempre a cargo del destinatario. La mercandería viaja bajo riesgo y peligro del comprador, incluso cuando se vende franco destino.

NOTA: Il termine (Dx) Destro o (Sx) Sinistro della macchina o di parti di essa, è inteso guardando la macchina dalla parte posteriore. Le eccezioni saranno indicate.

NOTE: The symbols (Dx) right and (Sx) left, concerning the machine or single parts of it, are referred, as in the figure, to a rear view of them. Exceptions will be indicated.

N.B.: Die Merkzeichen (Dx) rechts und (Sx) links betreffen eine rückwärtige Aussicht der Maschine oder Teile von ihr (siehe Bild). Ausnahmen werden gezeigt.

N.B.: Les références (Dx) droit et (Sx) gauche de la machine ou des parties de la même, est entendue, comme de la figure, en regardant la machine de derriere dans le sens de marche.

N.B.: La refencia (Dx) derecha o (Sx) izquierda de la máquina o de sus componentes, se entiende, como en la figura, mirando la máquina por la parte trasera. Se indicarán las excepciones.

N° Tavola

Descrizione

Pagina

TAV. 012 TAV. 021 TAV. 032 TAV. 053 TAV. 064 TAV. 073 TAV. 082 TAV. 092 TAV. 260 TAV. 105 TAV. 115 TAV. 331 TAV. 280 TAV. 350 TAV. 292 TAV. 124 TAV. 134 TAV. 361 TAV. 342 TAV. 241 TAV. 142 TAV. 152 TAV. 174 TAV. 313 TAV. 323 TAV. 184 TAV. 233 TAV. 271 TAV. 194 TAV. 204 TAV. 214 TAV. 224 TAV. 370 TAV. 251

Attacco 3 punti Telaio MTE Telaio MTE300 Segnafile Impianto oleodinamico segnafile Depressore Scatola di rinvio elemento Distributore semi Dischi di semina Telaio elemeto Ruote di profondità e di compressione Coprisemi anteriori e posteriori per ruote a “v” Ruota compressione farmflex Ø 370 (con copriseme anteriore) Coltro a disco striato Esclusione elettrica file di semina Cambio Ruote di trasmissione Scaletta ruote portanti Kit ruote per terreni sassosi - Flangiatura ruote Presa di potenza posteriore Supporti serbatoi spandiconcime MTE Supporti serbatoi spandiconcime MTE300 Serbatoi spandiconcime Supporti serbatoio spandiconcime unico Serbatoio spandiconcime unico Elementi di concimazione Speedy set Concimazione pneumatica file esterne Microgranulatore MTE Microgranulatore MTE300 Trasmissione spandiconcime plastica e microgranulatore MTE Trasmissione spandiconcimeplastica/BBP e microgranulatore MTE300 Applicazione doppio microgranulatore Accessori

4 6 8 10 12 14 16 18 20 22 26 30 32 34 36 38 42 46 48 50 52 54 56 60 62 66 68 70 72 76 80 82 84 86

TAV. 908/12 5 6 7 2 3 1 4

5 6 8

12 28

11 5

13 9 24 25 26

14 27 25 23

23 22

15 17

16 17 18 20

16 5

cod. G19530265

ATTACCO 3 PUNTI Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29

F20120400 G65336004 F01410088 G16610370 G13812311 F02200507 F20100062 G15211270 G15211411 G15410471 G15211770 F02200246 F02200584 G15410492 F20100078 F01020235 G15110091 F20120017 G67002011 G22270462 G15471611 F01020510 F01200306 G18800320 F01420060 F01020484 F01220033 G18902960 G15410122

TAV. 908/12

Descrizione

Description

Benennung

Descripcion

GANCIO SOSTEGNO CARDANO MOLLA SPEC.ZN AGG.SEMINAT. SP ROS.M14 15X 28X2,5 U6592 ZG ATTACCO TERZO PUNTO RAPIDO CATENELLA CON MOSCHETTONE SPINA A SCATTO D 9 B/83 SPINA GASPARDO 25X128 BARRA 1°-2° PUNTO FERMO ATTACCO RAPIDO SUPP.PUNTELLO TEL.150 TERZO PUNTO RINF.150 COPIGLIA 6 X45 1336 ZN SPINA DI SICUREZZA D.12X70 ZN PUNTELLO SPINA GASPARDO 28X99 VITE M14X 2X220 U5737 8.8 ZG SCONTRO A U VOMERO REVERS.F37 40X5X135 BULLONE TESTA OVALE M10X35 MOLLA ROMPITRACCIA VERNICIATA SUPPORTO ROMPITRACCIA 150 VITE M12X1,75X30 U5739 8.8 ZG DADO 14 5588 6.8 ZN BOCCOLA 10,25X18X13 ROS.M10 10,5X 30X2,5 U6593 ZG VITE M10X 1,5X45 U5739 8.8 ZG DADO M10X 1,5 D980 8 ZG MOLLA TRAZ.TRASM.RUOTA ZN PRIMO/SECONDO PUNTO

SHAFT HOOK SPEC SPRING- ZN ADD. SEEDER SP PLANE WASHER D14 UNI 6592 ZN ATTACHMENT CHAIN WITH SPRING CATCH SNAP PIN D 9 B/83 FOR 3RD POINT 1-2 LINKAGE BAR QUICK LINKAGE STOP PROP SUPPORT TEL.150 THIRD POINT REINFORCEMENT 150 SPLIT PIN 6 X45 1336 GALVAN. GALVAN. SAFETY PIN D.12X70 PROP PIN D.28 BOLT M14X 2X220 U5737 8.8 ZG STRIKER SWIVEL PLOUGH-SHARE F37 40X5X1 OVAL HEAD BOLT M10X35 PAINTED TRACE BR. SPRING ROW-BREAKER SUPPORT 150 BOLT M 12X30 NUT M14X2 BUSHING 10,50X18X31 WASHER 10,5X30 BOLT 10X45 5739 8.G GALVANIZED SELF LOCKING NUT M10X1,5 980-V TRANSMISSION TENSIONER SPRING FIRST/SECOND POINT

SUPPORT CARDAN RESSORT SPEC. ZN ATTELAGE SEME RONDELLE D14 UNI 6592 ZN FIXATION CHAINETTE AVEC MOUSQUETON FICHE A DETENTE D 9 B/83 GOUJON 3EME POINT BARRE 1.-2. P. ARRET ATTELAGE RAPIDE SUPP. ETRESILLON TEL.150 TROISIEME POINT RENFORCE GOUPILLE 6 X45 1336 ZN GOUPILLE DE S+CURIT+ D.12X70 Z +TR+SILLON GOUJON D.28 VIS M14X 2X220 U5737 8.8 ZG BRIDE 150 MM SOC REVERS. F37 40X5X135 BOULON TETE OVALE M10X35 RESSORT BRISEUR DE TRACES VERN SUPPORT EFFACEUR DE TRACES 150 VIS M 12X30 ECROU M14X2 BOITE 10,50X18X31 RONDELLE 10,5X30 VIS 10X45 5739 8.G ZN ECROU AUTOBL. M10X1,5 980-V RESSORT TRACT. ENTRAIN. ROUE Z PREMIER/DEUXIEME POINT

GELENKWELLE - HACKEN SPEZIALFEDER ZN SZELEM. KUPPL. SCHEIBE D14 UNI 6592 ZN ANSCHLUSS KETTE MIT KARABINERHAKEN EINRASTSTIFT D 9 B/83 BOLZEN 3. PUNKT STAB 1.-2. P. FESTSTELLVORRICHTUNG SCHNELLAN HALTERUNG RAHMENSTsTZE 150 DRITTER PUNKT VERSTZRKT SPLINT 6 X45 1336 ZN SCHERSTIFT D.12X70 ZN ST_TZE BOLZEN D.28 SCHRAUBE M14X 2X220 U5737 8. ANSCHLAG UMKEHRBARE SCHAR F37 40X5X135 SCHRAUBE OVALER KOPFM10X35 FEDER SPURMESSER LACKIERT HALTERUNG SPURAUFREISSER 150 SCHRAUBE M 12X30 MUTTER M14X2 B_CHSE 10,50X18X31 SCHEIBE 10,5X30 SCHRAUBE 10X45 5739 8.G ZN SELBSTSP.MUTT. M10X1,5 980-V ZUGFEDER RADANTRIEB ZN ERSTER/ZWEITER PUNKT

SOPORTE CARDAN MUELLE ESPEC. ZN CONEX. SEMBRA ARANDELA D14 UNI 6592 ZN CONEXIN CADENA CON GANCHO CLAVIJA DE MUELLE D 9 B/83 PERNO 3 PUNTO BARRA 1.-2. P. BLOQUEO CONEXION RAPIDA SOPORTE PUNTAL BASTIDOR 150 TERCER PUNTO REF. PASADOR 6 X45 1336 ZN PASADOR DE SEGURIDAD D 12X70 Z PUNTAL PERNO D.28 TORNIL. M14X 2X220 U5737 8.8 ELEMENTO DE EMPALME REJAS REVERS. F37 40X5X135 PERNO CABEZA OVALADA M10X35 MUELLE ROMPEHUELLA BARNIZADA SOPORTE BORRAHUELLAS 150 TORNILLO M 12X30 DADO M14X2 CASQUILLO 10,50X18X31 ARANDELA 10,5X30 TORNILLO 10X45 5739 8.G ZN DADO AUTOBL. M10X1,5 980-V MUELLE TRAC. TRANSM.RUEDA ZN PRIMER/SEGUNDO PUNTO

cod. G19530265

TAV. 21

44 7

46 45

4 42 27

47 46

99954274 Trasformazione ST300/MTE-Telaio Fisso

8 11

5 34

12 22

15 36 39

36 14 3

24 9

33 40

37 38

23 25 24

32 30 1 20 31 41 26

cod. G19530265

TELAIO MTE Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

G15110991 G15112630 G15210802 G15210820 G15210831 G15210900 G15410471 G15410492 G18701770 G19002770 G20980094 G22500022 G15113000 G22500024 G22500025 G22270463 G19003560 G22505024 G22505027 G22505029 G22505030 F03151216 G13811211 F01410124 F02200228 F02200229 F02200246 F02200452 F02200584 F03100181 G67004010 G19003000 F03150935 F05010359 F03151237 F03151238 F03150266 F03150211 F03151194 F05150325 G15112650 G13812311 F01200306 G15112480 G15112450 G15110091 F01020235 G15210910

TAV. 21

Descrizione

Description

Benennung

Descripcion

ASSE LATERALE PISTONI ZN CILINDRO BRACCIO ESTERNO ST-MTE TELAIO CENTRALE TUBO REGOLAZIONE TELESC.300 DISTANZIALE CHIUSURA ST300 SUPP.PUNTELLO TEL.150 PUNTELLO RONDELLA 50 X90 X0,5 PROTEZIONE ASSI BOCCOLA 18,25X25X18 TUBO 1/4 R2 C-C MT.1,00 SUPPORTO TUBI IDRAULICI TUBO 1/4 R2 C-F MT.0,60 PERNO CENTRALE CILINDRI TUB.TR.1/4R2 F-F 1/4 L1500 LM PIASTRA SCORRIMENTO SP.9,5 SPINA SPINA BOCCOLA FORATA BOCCOLA RACCORDO T M-M-F 1/4' ZN TUBO X COLLEG. AL TRATTORE ROS.M20 21X 37X 3 U6592 ZG COPIGLIA 5X 35 U1336 ZG COPIGLIA 5X 45 U1336 ZG COPIGLIA 6 X45 1336 ZN SPINA A SCATTO D.4,4 B/80 SPINA DI SICUREZZA D.12X70 ZN KIT GUARNIZ.CILINDRO 15112630 SUPP.CON ROTULA CAT.1 D.22,1 TAPPO PER TELAIO 150 INNESTO RAP.MASCH.1/2 A VALV. PASSAPARETE 1/4M-1/4M RONDELLA RAME 21X27X1,5 -1/2" RONDELLA RAME 13X19X1,5 -1/4" NIPPLO MASCH.CIL.1/4 ZN NIPPLO MASCH.CIL.1/2-1/4 ZN PROLUNGA CORTA 036 1/4 CAPPUCCIO INNESTO 1/2 PROLUNGA PISTONE CATENELLA CON MOSCHETTONE DADO 14 5588 6.8 ZN DISTANZIALE D'IRRIGIDIM.ANT DISTANZIALE D'IRRIGIDIM.POST SCONTRO A U VITE M14X 2X220 U5737 8.8 ZG DISTANZIALE CHIUSURA MTE

SIDE SPINDLE PISTONS ZN CYLINDER ARM- EXTERNAL ST-MTE FRAME CENTRAL TELESCOPING REGULATION TUBE 30 SPACER CLOSING ST300 PROP SUPPORT TEL.150 PROP WASHER 50 X90 X0,5 SPINDLE PROTECTION BUSHING 18,25X25X18 PIPE 1/4 R1 C-C MT.1-00 PIPE SUPPORT PIPE 1/4 R1 C-F MT.0-60 PIN- CYLINDER CENTRAL TUBE TR.1/4R2 F-F1/4 L1500 LM SLIDING PLATE SP9,5 PIN PIN PERFORATED BUSHING BUSHING UNION T M-M-F 1/4' ZN PIPE FOR CONNECTION TO TRACTOR PLANE WASHER D20 UNI 6592 ZN SPLIT PIN 5 X35 1336 GALVAN. SPLIT PIN 5 X45 1336 GALVAN. SPLIT PIN 6 X45 1336 GALVAN. SNAP PIN D.4-4 B/80 GALVAN. SAFETY PIN D.12X70 KIT O-RING CYLINDER 15112630 SUPP. WITH JOINT CHAIN 1 D.22. TAP FOR FRAME 150 QUICK CONNECT MALE CONE 1/2 CO FAIRLEAD 1/4M-1/4M 1/2 COPPER WASHER 1/4 COPPER WASHER NIPPLE GALV.CYL.MALE 1/4 ZN NIPLE 1/4-1/2 SHORT EXTENSION 036 1/4 COVER 1/2 PISTON EXTENSION CHAIN WITH SPRING CATCH NUT M14X2 SPACER SPACER STRIKER BOLT M14X 2X220 U5737 8.8 ZG SPACER CLOSING MTE

AXE LATERAL PISTON ZN CYLINDRE BRAS EXT. ST-MTE BATI CENTR. TUBE R+GLAGE T+LESC.300 ENTRETOISE FERMETURE ST300 SUPP. ETRESILLON TEL.150 +TR+SILLON RONDELLE 50 X90 X0,5 PROTECTION AXES BOITE 18,25X25X18 TUBE 1/4 R1 C-C M. 1-00 SUPPORT TUBES TUBE 1/4 R1 C-F M. 0-60 PIVOT CENTR. CYLINDRES TUB.TR.1/4R2 F-F 1/4 L1500 LM PLAQUE GLISSEMENT SP.9,5 BROCHE BROCHE BOITE PERCEE BOITE RACCORD T M-M-F ª' ZN TUBE POUR CONN. AU TRACTEUR RONDELLE D20 UNI 6592 ZN GOUPILLE 5 X35 1336 ZN GOUPILLE 5 X45 1336 ZN GOUPILLE 6 X45 1336 ZN FICHE A DETENTE D. 4-4 B/80 GOUPILLE DE S+CURIT+ D.12X70 Z KIT GARNIT. CYLINDRE 15112630 SUPP.AVEC ROTULE CAT.1 D.22,1 BOUCHON POUR BATI 150 CONNEXION RAPIDE MALE CONE 1/2 TUILE EN 1/4M-1/4M RONDELLE CUIVRE 1/2 RONDELLE CUIVRE 1/4 NIPPLE MALE CYL. 1/4 ZN NIPLE 1/4-1/2 RALLONGE COURTE 036 1/4 COUVERCLE 1/2 RALLONGE PISTON CHAINETTE AVEC MOUSQUETON ECROU M14X2 ENTRETOISE ENTRETOISE BRIDE 150 MM VIS M14X 2X220 U5737 8.8 ZG ENTRETOISE FERMETURE MTE

SEITENACHSE KOLBEN ZN ZYLINDER AUSSENARM ST-MTE MITTELRAHMEN LEITUNG EINSTELLUNG TELESK.300 DISTANZSTsCK SCHLIESSUNG ST300 HALTERUNG RAHMENSTsTZE 150 ST_TZE UNTERLEGSCHEIBE 50 X90 X0,5 SCHUTZ ACHSEN BsCHSE 18,25X25X18 ROHR 1/4 R1 C-C M 1-00 ROHRHALTERUNG ROHR 1/4 R1 C-F M 0-60 MITTELZAPFEN ZYLINDER ROHR1/4R2 F-F 1/4 L1500 LM GLEITPLATTE SP9,5 STIFT STIFT GELOCHTE BsCHSE BsCHSE ANSCHLUSSTsCK TM-M-F 1/4' ZN ROHR F. KUPPLUNG AM SCHLEPPER SCHEIBE D20 UNI 6592 ZN SPLINT 5 X35 1336 ZN SPLINT 5 X45 1336 ZN SPLINT 6 X45 1336 ZN EINRASTSTIFT D 4-4 B/80 SCHERSTIFT D.12X70 ZN KIT DICHT.OR ZYLINDER15112630 HALTERUNG MIT GELENK KETTE 1 PFROPFEN FOR RAHMEN 150 SCHNELLKUPPLUNG GEWINDE KONISC VOR_BERGEHENDE 1/4M-1/4M UNTERLEGSCHEIBE KUPFER 1/2 UNTERLEGSCHEIBE KUPFER 1/4 NIPPELZYL.1/4 ZN NIPLE 1/4-1/2 KURZE VERLZNGERUNG 036 1/4 DECKEL 1/2 VERLZNGERUNG KOLBEN KETTE MIT KARABINERHAKEN MUTTER M14X2 DISTANZST_CK DISTANZST_CK ANSCHLAG SCHRAUBE M14X 2X220 U5737 8. DISTANZSTsCK SCHLIESSUNG MTE

EJE LATERAL PISTONES ZN CILINDRO BRAZO EXTERIOR ST-MTE BASTIDOR CENTRAL TUBO REGULACIËN TELESC.300 DISTANCIADOR CIERRE ST300 SOPORTE PUNTAL BASTIDOR 150 PUNTAL ARANDELA 50 X90 X0,5 PROTECCIN EJES P CASQUILLO 18,25X25X18 TUBO 1/4 R1 C-C MT.1-00 SOPORTE TUBOS TUBO 1/4 R1 C-F MT.0-60 PERNO CENTRAL CILINDROS TUB.TR.1/4R2 F-F 1/4 L1500 LM PLACA DE DESPLAZAMIENTO SP9,5 CLAVIJA CLAVIJA CASQUILLO PERFORADA CASQUILLO UNIN T M-M-F 1/4' ZN R TUBO P/CONEXIN AL TRACTOR T ARANDELLA D20 UNI 6592 ZN PASADOR 5 X35 1336 ZN PASADOR 5 X45 1336 ZN PASADOR 6 X45 1336 ZN CLAVIJA DE MUELLE D.4-4 B/80 PASADOR DE SEGURIDAD D 12X70 Z SET JUNTA OR CILINDRO15112630 SOP. CON RËTULA CAD.1 D.22,1 TAPON PARA BASTIDOR 150 ACOPLAMIENTO RAPIDO MACHO CONO PASTECA 1/4M-1/4M ARANDELA COBRE 1/2 ARANDELA COBRE 1/4 NIPLE MACHO CIL.1/4 ZN NIPLE 1/4-1/2 PROLONG. CORTA 036 1/4 TAPA 1/2 PROLONGACIN PISTN PR CADENA CON GANCHO DADO M14X2 DISTANCIADOR DISTANCIADOR ELEMENTO DE EMPALME TORNIL. M14X 2X220 U5737 8.8 DISTANCIADOR CIERRE MTE

cod. G19530265

TAV. 32

5 3 31

13 25

(*)

15 - Sp. 0,5 51 - Sp. 0,2

(**)

Sp. (mm)

37 14

Sp. 9** - 50

20 28

9 - Sp. 9,5**

(*)

Sp. 11** - 10

(*)

43 46

43 22

(*) 32

10 - Sp. 11**

40 47

(*)

44 45

30 8

33 16

26 6 19 39

38 49

cod. G19530265

TELAIO MTE300 Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51

G13812311 G15211080 G15110292 G15110302 G15110352 G15110991 G15211280 G15211290 G19003560 G19003570 G19003590 G15112630 G15112711 G15112691 G18701770 G19003000 G20980094 G22500018 G22500019 G22500022 G15113000 G22500024 G22500025 G22270463 G15110091 G22505024 G22505027 F03151216 F01020235 G13811211 F01200306 F01410124 F02200228 F02200229 F02200246 F02200452 F02200584 F03100181 G67004010 F03150935 F05010359 F03151237 F03151238 F03150266 F03150211 F03151194 F05150325 G15211090 G15112650 G19003590 G18701940

TAV. 32

Descrizione

Description

Benennung

Descripcion

CATENELLA CON MOSCHETTONE TELAIO CENTRALE MTE SECONDO TUBO TELESCOPICO DX SECONDO TUBO TELESCOPICO SX TERZO TUBO TELESCOPICO ASSE LATERALE PISTONI ZN REGOLAZIONE 2° TUBO MTE300 REGOLAZIONE 3°TUBO MTE300 PIASTRA SCORRIMENTO SP.9,5 PIASTRA SCORRIMENTO SP.11 PIASTRA SCORRIMENTO SP.9 CILINDRO SUPPORTO PUNTELLO PUNTELLO ST250 RONDELLA 50 X90 X0,5 TAPPO PER TELAIO 150 BOCCOLA 18,25X25X18 BOCCOLA PERNO EST.CILINDRO BOCCOLA FERMO PERNO EST.CIL. TUBO 1/4 R2 C-C MT.1,00 SUPPORTO TUBI IDRAULICI TUBO 1/4 R2 C-F MT.0,60 PERNO CENTRALE CILINDRI TUB.TR.1/4R2 F-F 1/4 L1500 LM SCONTRO A U SPINA SPINA RACCORDO T M-M-F 1/4' ZN VITE M14X 2X220 U5737 8.8 ZG TUBO X COLLEG. AL TRATTORE DADO 14 5588 6.8 ZN ROS.M20 21X 37X 3 U6592 ZG COPIGLIA 5X 35 U1336 ZG COPIGLIA 5X 45 U1336 ZG COPIGLIA 6 X45 1336 ZN SPINA A SCATTO D.4,4 B/80 SPINA DI SICUREZZA D.12X70 ZN KIT GUARNIZ.CILINDRO 15112630 SUPP.CON ROTULA CAT.1 D.22,1 INNESTO RAP.MASCH.1/2 A VALV. PASSAPARETE 1/4M-1/4M RONDELLA RAME 21X27X1,5 -1/2" RONDELLA RAME 13X19X1,5 -1/4" NIPPLO MASCH.CIL.1/4 ZN NIPPLO MASCH.CIL.1/2-1/4 ZN PROLUNGA CORTA 036 1/4 CAPPUCCIO INNESTO 1/2 DISTANZIALE CHIUSURA MTE300 PROLUNGA PISTONE PIASTRA SCORRIMENTO SP.9 RONDELLA 50 X90 X0,2

CHAIN WITH SPRING CATCH FRAME CENTRAL MTE TELESCOPIC FRAME INT.RIGHT LEFT 2ND TELESCOPIC TUBE THIRD TELESCOPIC TUBE SIDE SPINDLE PISTONS ZN 2. TUBE REGULATION MTE300 3. TUBE REGULATION MTE300 SLIDING PLATE SP9,5 SLIDING PLATE SP.11 SLIDING PLATE SP.9 CYLINDER PROP SUPPORT PROP ST250 WASHER 50 X90 X0,5 TAP FOR FRAME 150 BUSHING 18,25X25X18 BUSHING CYLIND. OUTER PIN CYLIND. OUTER PIN STOP BUSHING PIPE 1/4 R1 C-C MT.1-00 PIPE SUPPORT PIPE 1/4 R1 C-F MT.0-60 PIN- CYLINDER CENTRAL TUBE TR.1/4R2 F-F1/4 L1500 LM STRIKER PIN PIN UNION T M-M-F 1/4' ZN BOLT M14X 2X220 U5737 8.8 ZG PIPE FOR CONNECTION TO TRACTOR NUT M14X2 PLANE WASHER D20 UNI 6592 ZN SPLIT PIN 5 X35 1336 GALVAN. SPLIT PIN 5 X45 1336 GALVAN. SPLIT PIN 6 X45 1336 GALVAN. SNAP PIN D.4-4 B/80 GALVAN. SAFETY PIN D.12X70 KIT O-RING CYLINDER 15112630 SUPP. WITH JOINT CHAIN 1 D.22. QUICK CONNECT MALE CONE 1/2 CO FAIRLEAD 1/4M-1/4M 1/2 COPPER WASHER 1/4 COPPER WASHER NIPPLE GALV.CYL.MALE 1/4 ZN NIPLE 1/4-1/2 SHORT EXTENSION 036 1/4 COVER 1/2 MTE300 CLOSING SPACER PISTON EXTENSION SLIDING PLATE SP.9 WASHER 50 X90 X0,2

CHAINETTE AVEC MOUSQUETON BATI CENTR. MTE BATI TELESCOPIQUE INT. DRT. DEUXIEME TUBE TELESCOPIQUE GCH TROISIEME TUBE TELESCOPIQUE AXE LATERAL PISTON ZN REGLAGE 2. TUBE MTE300 REGLAGE 3. TUBE MTE300 PLAQUE GLISSEMENT SP.9,5 PLAQUE GLISSEMENT SP.11 PLAQUE GLISSEMENT SP.9 CYLINDRE SUPPORT ETRESILLON ETRESILLON ST250 RONDELLE 50 X90 X0,5 BOUCHON POUR BATI 150 BOITE 18,25X25X18 BOITE PIVOT EXT. CYLINDRE BOITE ARRET PIVOT EXT. CYL. TUBE 1/4 R1 C-C M. 1-00 SUPPORT TUBES TUBE 1/4 R1 C-F M. 0-60 PIVOT CENTR. CYLINDRES TUB.TR.1/4R2 F-F 1/4 L1500 LM BRIDE 150 MM BROCHE BROCHE RACCORD T M-M-F ª' ZN VIS M14X 2X220 U5737 8.8 ZG TUBE POUR CONN. AU TRACTEUR ECROU M14X2 RONDELLE D20 UNI 6592 ZN GOUPILLE 5 X35 1336 ZN GOUPILLE 5 X45 1336 ZN GOUPILLE 6 X45 1336 ZN FICHE A DETENTE D. 4-4 B/80 GOUPILLE DE S+CURIT+ D.12X70 Z KIT GARNIT. CYLINDRE 15112630 SUPP.AVEC ROTULE CAT.1 D.22,1 CONNEXION RAPIDE MALE CONE 1/2 TUILE EN 1/4M-1/4M RONDELLE CUIVRE 1/2 RONDELLE CUIVRE 1/4 NIPPLE MALE CYL. 1/4 ZN NIPLE 1/4-1/2 RALLONGE COURTE 036 1/4 COUVERCLE 1/2 ECARTEUR FERMETURE MTE300 RALLONGE PISTON PLAQUE GLISSEMENT SP.9 RONDELLE 50 X90 X0,2

KETTE MIT KARABINERHAKEN MITTELRAHMEN MTE INNERER RECHTER TELESKOPRAHMEN ZWEITER TELESKOPRAHMEN LINKS DRITTES TELESKOPISCHES ROHR SEITENACHSE KOLBEN ZN EINSTELLUNG 2. ROHR MTE300 EINSTELLUNG 3. ROHR MTE300 GLEITPLATTE SP9,5 GLEITPLATTE SP.11 GLEITPLATTE SP.9 ZYLINDER STsTZLAGER STsTZE ST250 UNTERLEGSCHEIBE 50 X90 X0,5 PFROPFEN FOR RAHMEN 150 BsCHSE 18,25X25X18 BsCHSE AUSSENBOLZEN ZYLINDER ANSCHLAGBsCHSE AUSSENBOLZ. ZYL ROHR 1/4 R1 C-C M 1-00 ROHRHALTERUNG ROHR 1/4 R1 C-F M 0-60 MITTELZAPFEN ZYLINDER ROHR1/4R2 F-F 1/4 L1500 LM ANSCHLAG STIFT STIFT ANSCHLUSSTsCK TM-M-F 1/4' ZN SCHRAUBE M14X 2X220 U5737 8. ROHR F. KUPPLUNG AM SCHLEPPER MUTTER M14X2 SCHEIBE D20 UNI 6592 ZN SPLINT 5 X35 1336 ZN SPLINT 5 X45 1336 ZN SPLINT 6 X45 1336 ZN EINRASTSTIFT D 4-4 B/80 SCHERSTIFT D.12X70 ZN KIT DICHT.OR ZYLINDER15112630 HALTERUNG MIT GELENK KETTE 1 SCHNELLKUPPLUNG GEWINDE KONISC VOR_BERGEHENDE 1/4M-1/4M UNTERLEGSCHEIBE KUPFER 1/2 UNTERLEGSCHEIBE KUPFER 1/4 NIPPELZYL.1/4 ZN NIPLE 1/4-1/2 KURZE VERLZNGERUNG 036 1/4 DECKEL 1/2 DISTANZST_CK SCHLIESSUNG MTE 3 VERLZNGERUNG KOLBEN GLEITPLATTE SP.9 UNTERLEGSCHEIBE 50 X90 X0,2

CADENA CON GANCHO BASTIDOR CENTRAL MTE BASTIDOR TELESCOPICO INT.DER. SEGUNDO TUBO TELESCOPICO IZQ. TERCER TUBO TELESCOPICO EJE LATERAL PISTONES ZN REGULACIËN 2.TUBO MTE300 REGULACIËN 3.TUBO MTE300 PLACA DE DESPLAZAMIENTO SP9,5 PLACA DE DESPLAZAMIENTO SP.11 PLACA DE DESPLAZAMIENTO SP.9 CILINDRO STsTZLAGER PUNTAL ST250 ARANDELA 50 X90 X0,5 TAPON PARA BASTIDOR 150 CASQUILLO 18,25X25X18 CASQUILLO ESPIGA EXT. CILINDRO CASQUILLO BLOQUEO ESPIGA EXT.C TUBO 1/4 R1 C-C MT.1-00 SOPORTE TUBOS TUBO 1/4 R1 C-F MT.0-60 PERNO CENTRAL CILINDROS TUB.TR.1/4R2 F-F 1/4 L1500 LM ELEMENTO DE EMPALME CLAVIJA CLAVIJA UNIN T M-M-F 1/4' ZN R TORNIL. M14X 2X220 U5737 8.8 TUBO P/CONEXIN AL TRACTOR T DADO M14X2 ARANDELLA D20 UNI 6592 ZN PASADOR 5 X35 1336 ZN PASADOR 5 X45 1336 ZN PASADOR 6 X45 1336 ZN CLAVIJA DE MUELLE D.4-4 B/80 PASADOR DE SEGURIDAD D 12X70 Z SET JUNTA OR CILINDRO15112630 SOP. CON RËTULA CAD.1 D.22,1 ACOPLAMIENTO RAPIDO MACHO CONO PASTECA 1/4M-1/4M ARANDELA COBRE 1/2 ARANDELA COBRE 1/4 NIPLE MACHO CIL.1/4 ZN NIPLE 1/4-1/2 PROLONG. CORTA 036 1/4 TAPA 1/2 DISTANCIADOR CIERRE MTE300 PROLONGACIN PISTN PR PLACA DE DESPLAZAMIENTO SP.9 ARANDELA 50 X90 X0,2

cod. G19530265

TAV. 53 23

24 26

23 12 45

33 25

32 38

37 32

35 29 31

28 27

35 29 31

28 27

39 24

24 36

1 18

16 20

53 54

10 15

49 48

11 12 13

55 46

8 9

cod. G19530265

SEGNAFILE Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56

G15212750 F01230046 G13812311 F02200507 G15212670 F05150460 G14217360 F02200194 G15413020 G20970111 G65337004 F01200270 G15212790 F01020479 G15413010 G20970128 G15212700 G15212760 G15110091 F01020233 F01200306 G15112921 F01060040 F01200244 F01230098 F01420048 F02050631 F03010576 F04010164 G15113010 G16610160 G16610170 G16610190 G16610210 G18801270 G19203730 F01020575 G17111481 G18802790 G17111490 G17111290 F20110865 G17111320 G17111330 F01410064 F02100164 F01020048 F01020168 F01420084 G18803070 G22280025 G15212811 F02200452 F01220048 F01220011 G16311780

Descrizione BRACCIO SEGNAFILE SX DADO M10X 1,25 D982 8 ZG CATENELLA CON MOSCHETTONE SPINA A SCATTO D 9 B/83 SUPPORTO SEGNAFILE SX PARACOLPI CIL.D50X21 CILINDRO SEGNAF.30X40-155 COPIGLIA 4X 25 U1336 ZG SPINA 15X120 ZN RONDELLA 29,8X2X16,5 MOLLA TRAZ.SOLLEV. FU DADO 10 5588 6.8 ZN PIASTRA POSTERIORE VITE M10X 1,5X35 U5739 8.8 ZG SPINA 15X62 ZN RONDELLA 28X2,5X10,25 SUPPORTO SEGNAFILE DX BRACCIO SEGNAFILE DX SCONTRO A U VITE M14X 2X200 U5737 8.8 DADO 14 5588 6.8 ZN DISCO D.320 LIM.COMPL.ST-MTE BUL.M 8X1,25X 20 U5732 4.6 ZG DADO M 8X1,25 U5588 6.8 ZG DADO M18X 2,5 D982 8 ZG ROND.PIANA 9X 24X2 6593 ZN ANELLO ARR.47 UNI 7437-75 GUARNIZIONE OR 2200 CUSCINETTO 6204 2RS PERNO REGGIDISCO SEGNAF.ST-MTE SUPP.CUSCINETTI DISCO SEGN.ZN. DISCO SEGNAFILE D.320 CHIUSURA CUSCINETTO ZN ASS.LIMITATORE PROFONDITA' BOCCOLA 21 X25 X12 ZN FONDELLO ZN VITE M16X 2X60 U5739 8.8 ZG DISCO D.320 COMPL.MAGICA BOCCOLA 25 X20 X7 ZN B. PERNO REGGIDISCO SEGN.MAGICA MANICOTTO DISCO CAVALLOTTO A U M10 ZN SCONTRO MANICOTTO 4 FORI SCONTRO 90X70 -10 4F11 66X46 ROS.M10 10,5X 20X 2 U6592 ZG SPINA E.P. 10X 50 U6873 C70 BR VITE M 6X 1X 75 U5737 8.8 ZG VITE M12X1,75X90 U5737 8.8 ZG ROS.M14 14,5X 36X 3 U6593 ZG BOCCOLA 25X12,5X52 ZN CHIAVISTELLO PUNTELLO ID TUBO ESTERNO SPINA A SCATTO D.4,4 B/80 DADO M12X1,75 D980 8 ZG DADO M 6X 1 D980 8 ZG SUPPORTO ROTAZ.TUBO SEGNAFILE

cod. G19530265

TAV. 53 Description

Description

Benennung

Descripcion

SELF LOCKING NUT M10X1,25 CHAIN WITH SPRING CATCH SNAP PIN D 9 B/83

ECROU AUTOBL. M10X1,25 CHAINETTE AVEC MOUSQUETON FICHE A DETENTE D 9 B/83

SELBSTSPERR.MUTTER M10X1,25 KETTE MIT KARABINERHAKEN EINRASTSTIFT D 9 B/83

DADO AUTOBL. M10X1,25 CADENA CON GANCHO CLAVIJA DE MUELLE D 9 B/83

RUBBER BUFFER- CYLINDR.D50X21 ROWMARKER CYLINDER.D.30X40-155 SPLIT PIN 4 X25 1336 GALVAN. GALVANIZED PIN 15X120 WASHER 29,8X2X16,5 TRACTION SPRING LIFT. FU NUT M10

PARE-CHOCS CYL. D50X21 CYLINDRE TRACEUR 30X40-155 GOUPILLE 4 X25 1336 ZN GOUPILLE 15X120 ZN RONDELLE 29,8X2X16,5 RESSORT TRACT. LEVAGE FU ECROU M10

PUFFER ZYL.50X21 ZYLINDER SPURREISSER.30X40-155 SPLINT 4 X25 1336 ZN STIFT 15X120 ZN UNTERLEGSCHEIBE 29,8X2X16,5 ZUGFEDER HEBUNG FU MUTTER M10

PARAGOLPES CIL.D50X21 CILINDRO MARC.FILAS 35X40-155 PASADOR 4 X25 1336 ZN CLAVIJA 15X120 ZN ARANDELA 29,8X2X16,5 MUELLE TRAC. LEVDEL. FU DADO M10

BOLT M 10X35 PIN 15X62 ZN WASHER 28X2-5X10-25

VIS M 10X35 GOUPILLE 15X62 ZN RONDELLE 28X2-5X10-25

SCHRAUBE M 10X35 BOLZENSTIFT 15X62 ZN UNTERLEGSCHEIBE 28X2-5X10-25

TORNILLO M 10X35 PASADOR 15X62 ZN ARANDELA 28X2-5X10-25

STRIKER

BRIDE 150 MM

ANSCHLAG

ELEMENTO DE EMPALME

NUT M14X2 LIMITER DISK D.320 COMPL. ST-M BOLT 8 X20 5732 4.6 GALVANIZED NUT M8 SELF LOCKING NUT M18X1,5 PLANE WASHER D.8 STOP RING 47 UNI 7437-75 GASKET OR 033 DOWTY BEARING 6204 2RS ROWMAKER DISC-HOLDER PIN GALVAN. ROWMAKER DISK BEARING ROW MARKER DISK D.320 GALVAN. BEARING CLOSURE LIMITER DEPTH COUPLYNG BUSHING 21 X 25 X 12 ZN GALVAN. HOLDER

ECROU M14X2 DISQUE LIMITEUR D.320 COMPL. S VIS 8 X20 5732 4.6 ZN ECROU M8 ECROU AUTOBL. M18X1,5 RONDELLE D.8 BAGUE ARRET 47 UNI 7437-75 BAGUE OR 033 DOWTY ROULEMENT 6204 2RS PIVOT PORTE-DISQUE TRACEUR SUPPORT ROULEMENTS DISQUE TRAC DISQUE TRACEUR D320 FERMETURE ROULEMENT ZN GR. ASS. LIMITEUR DE PROFONDEU BOITE 21 X25 X12 ZN FOND ZN

MUTTER M14X2 BREGENZERSCHEIBE D.320 KOMP. S SCHRAUBE 8 X20 5732 4.6 ZN MUTTER M8 SELBSTSPERR.MUTTER M18X1,5 SCHEIBE D.8 RING 47 UNI 7437-75 RING OR 033 DOWTY LAGER 6204 2RS SCHEIBENTRAGBOLZEN SCHEIBENLAGERHALTERUNG SPURREISSERSCHEIBE D. 320 LAGERVERSCHLUSS ZN TIEFENBEGRENZERKOMPLEX BsCHSE 21 X25 X12 ZN BODENSCHEIBE ZN

DADO M14X2 DISCO LIMITADOR D.320 COMP. ST TORNILLO 8 X20 5732 4.6 ZN DADO M8 DADO AUTOBL. M18X1,5 ARANDELA D.8 ANILLO PARADA 47 UNI 7437-75 ANILLO OR 033 DOWTY COJINETE 6204 2RS PERNO SOPORTE DISCO MARCAFILA SOPORTE COJINETE DE DISCO MARC DISCO MARCARDOR DE FILAS O 320 CIERRE COJINETE ZN CONJ. LIMITADOR DE PROFUNDIDAD CASQUILLO 21 X25 X12 ZN FONDO ZN

COMPLETE MAGICA D.320 DISK BUSHING 25 X20 X7 ZN B.

DISQUE D.320 COMPL. MAGIQUE BOITE 25 X20 X7 ZN B.

SCHEIBED.320 KOMPL. MAGICA B_CHSE 25 X20 X7 ZN B.

DISCO D.320 COMPL. MAGICO CASQUILLO 25 X20 X7 ZN B

DISC COUPLING SLEEVE U BOLT M10 ZN STOP TEETH COUPLING SLEEVE 4 H STOP TEETH 90X70 -10 4F11 66X4 WASHER 10,5X21 PIN EL. 10X50 DIN 1481 * BOLT 6 X75 5737 8.G GALVANIZ. BOLT 12X90 5737 8.G GALVANIZED GALVANIZED WASHER 14 X36 X3

MANCHON DISQUE +TRIER EN U M10 ZN BUT+E MANCHON 4 TROUS BUT+E 90X70 -10 4TROUS 11 66X4 RONDELLE 10,5X21 GOUPILLE EL.10 X50 DIN 1481 VIS 6 X75 5737 8.G ZN VIS 12X90 5737 8.G ZN RONDELLE 14 X36 X3 ZN

SCHEIBENMUFFE U-BOLZEN M10 ZN MUFFENANSCHLAG 4 BOHRUNGEN ANSCHLAG 90X70 -10 4F11 66X46 SCHEIBE 10,5X21 SPANNSTIFT 10X50 DIN 1481 SCHRAUBE 6 X75 5737 8.G ZN SCHRAUBE 12X90 5737 8.G ZN UNTERLEGSCHEIBE 14 X36 X3 ZN

MANGUITO DISCO PERNO EN U M10 ZN DIENTE DE PARADA MANGUITO 4 AG DIENTE DE PARADA 90X70 -10 4F1 ARANDELA 10,5X21 CLAVIJA EL.10 X50 DIN 1481 TORNILLO 6x75 5737 8.G ZN TORNILLO 12X90 5737 8.G ZN ARANDELA 14 X36 X3 ZN

PROP LATCH ID

VERROU ETRESILLON ID

RIEGEL STsTZE ID

PESTILLO PUNTAL ID

SNAP PIN D.4-4 B/80 SELF LOCKING NUT M12X1,75 980V SELF LOCKING NUT M6

FICHE A DETENTE D. 4-4 B/80 ECROU AUTOBL. M12X1,75 980-V ECROU AUTOBL. M6

EINRASTSTIFT D 4-4 B/80 SIEHE 00553312 SELBSTSPERR.MUTTER M6

CLAVIJA DE MUELLE D.4-4 B/80 DADO AUTOBL. M12X1,75 980-V DADO AUTOBL. M6

TAV. 64

18 15

6 7

17 16 4

14 11 13

12 13

2 20 Varianti - Varying

20 2 3 2

2 3 2

23 - L. 2750 21

2 24 - L. 3000 1

cod. G19530265

TAV. 64

IMPIANTO OLEODINAMICO SEGNAFILE Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

G14217360 F03151238 F03150266 G22270463 F20110770 F01200306 G18700690 G15412350 F01020068 F01200244 F03151194 F03150577 F03150122 F03150859 F05150325 F03150211 F03151237 F03150935 G13811211 F03151226 G16011690 F03100191 G22505141 G22505142

Descrizione

Description

Benennung

Descripcion

CILINDRO SEGNAF.30X40-155 RONDELLA RAME 13X19X1,5 -1/4" NIPPLO MASCH.CIL.1/4 ZN TUB.TR.1/4R2 F-F 1/4 L1500 LM CAVALLOTTO M14X96-119 ZN DADO 14 5588 6.8 ZN RONDELLA 15 X40 X6 ZN SUPPORTO VALVOLA SEGNAFILE VITE M 8X1,25X40 U5737 8.8 ZG DADO M 8X1,25 U5588 6.8 ZG PROLUNGA CORTA 036 1/4 VALVOLA SEGNAF.CROSS SQV NIPPLO MM 3/4 JIC OR 1/4 OR ZG CURVA 90°F.GIREV.1/4 - M.1/4 CAPPUCCIO INNESTO 1/2 NIPPLO MASCH.CIL.1/2-1/4 ZN RONDELLA RAME 21X27X1,5 -1/2" INNESTO RAP.MASCH.1/2 A VALV. TUBO X COLLEG. AL TRATTORE VALVOLA VRF 1/4' GAS MONT.NIPPLO 1/4 GRANO F.1,0 KIT GUARNIZ.CILINDRO 15413110 TUBO 1/4R2 C-F L.2750 LM TUBO 1/4R2 C-F L.3000 LM

ROWMARKER CYLINDER.D.30X40-155 1/4 COPPER WASHER NIPPLE GALV.CYL.MALE 1/4 ZN TUBE TR.1/4R2 F-F1/4 L1500 LM U-BOLT M14X96 - 119 ZN NUT M14X2 WASHER 15 X 40 X 6 ZN ROWMARKER VALVE SUPPORT BOLT 8 X40 5737 8.G GALVANIZED NUT M8 SHORT EXTENSION 036 1/4 ROW MARKER VALVE ATI C128513 NIPPLE- 3/4 JIC OR - 1/4 ELBOW 90[ F. SWIVEL 1/4 -M.1/4 COVER 1/2 NIPLE 1/4-1/2 1/2 COPPER WASHER QUICK CONNECT MALE CONE 1/2 CO PIPE FOR CONNECTION TO TRACTOR 1/4' GAS VALVE VRF UPRIGHT 1/4'' NIPPLE WITH GRUB CYLINDER SEAL KIT 15413110 PIPE 1/4R1 C-F L.2750 LM PIPE 1/4R2 C-F L.3000 LM

CYLINDRE TRACEUR 30X40-155 RONDELLE CUIVRE 1/4 NIPPLE MALE CYL. 1/4 ZN TUB.TR.1/4R2 F-F 1/4 L1500 LM CAVALIER M14X96 - 119 ZN ECROU M14X2 RONDELLE 15 X40 X6 ZN SUPPORT SOUPAPE TRACEUR VIS 8 X40 5737 8.G ZN ECROU M8 RALLONGE COURTE 036 1/4 SOUPAPE TRACEUR C.SQV NIPPLE 3/4 JIC OR - 1/4 COUDE 90[ F.TOURN.1/4 - M.1/4 COUVERCLE 1/2 NIPLE 1/4-1/2 RONDELLE CUIVRE 1/2 CONNEXION RAPIDE MALE CONE 1/2 TUBE POUR CONN. AU TRACTEUR SOUPAPE REG DEBIT VRF 1/4" GAZ MONTANT NIPPLE 1/4 AVEC GRAIN KIT GARNITURE CYLINDRE 1541311 TUBE 1/4R1 C-F L. 2750 LM TUBE 1/4R2 C-F L. 3000 LM

ZYLINDER SPURREISSER.30X40-155 UNTERLEGSCHEIBE KUPFER 1/4 NIPPELZYL.1/4 ZN ROHR1/4R2 F-F 1/4 L1500 LM VERBINDUNG M14X96 - 119 ZN MUTTER M14X2 UNTERLEGSCHEIBE 15 X40 X6 ZN VENTILHALTERUNG SPURREISSER SCHRAUBE 8 X40 5737 8.G ZN MUTTER M8 KURZE VERLZNGERUNG 036 1/4 VENTIL SPURREISSER ATI C128513 NIPPEL 3/4 JIC OR - 1/4 KNIESTsCK 90[ F.DREHB.1/4 - M. DECKEL 1/2 NIPLE 1/4-1/2 UNTERLEGSCHEIBE KUPFER 1/2 SCHNELLKUPPLUNG GEWINDE KONISC ROHR F. KUPPLUNG AM SCHLEPPER VENITL VRF 1/4' GAS STZNDER NIPPEL 1/4 MIT STIFT 8 KIT ZYLINDERDICHTUNG 15413110 ROHR 1/4R1 C-F L.2750 LM ROHR 1/4R2 C-F L.3000 LM

CILINDRO MARC.FILAS 35X40-155 ARANDELA COBRE 1/4 NIPLE MACHO CIL.1/4 ZN TUB.TR.1/4R2 F-F 1/4 L1500 LM PERNO EN U M14X96 - 119 ZN DADO M14X2 ARANDELA 15 X40 X6 ZN SOPORTE VæLVULA MARC. DE FILAS TORNILLO 8 X40 5737 8.G ZN DADO M8 PROLONG. CORTA 036 1/4 VæLVULA MARCAFILAS ATI C128513 NIPLE 3/4 JIC OR - 1/4 CURVA 90 F.GIRAT..1/4 - M.1/4C TAPA 1/2 NIPLE 1/4-1/2 ARANDELA COBRE 1/2 ACOPLAMIENTO RAPIDO MACHO CONO TUBO P/CONEXIN AL TRACTOR T VæLVULA VRF 1/4' GAS MONT.NIPLE 1/4 TORNIL.SIN CABE KIT JUNTA CILINDRO 15413110 TUBO 1/4R1 C-F L.2750 LM TUBO 1/4R2 C-F L.3000 LM

cod. G19530265

TAV. 73 31 - 540 giri/min. 12 - 1000 giri/min.

28 - 540 giri/min. 54 - 1000 giri/min. 37

35 19

23 43 36 34

29 20 30

38 27

9 16

40 53

26 41

16 540 giri/min. - 25 1000 giri/min. - 55

24 10

16 13 2 22

6 8

17 15 14

10 48 3

13 45 44

2 5

46 - (mt. ____)

23 50

cod. G19530265

TAV. 73

DEPRESSORE Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55

F01020047 F01430047 F01420036 F03150722 G19004480 F01230143 G13912060 G13912050 G22230335 F01020403 G22230015 G15450500 F01220011 F02050617 F02050641 F04010215 G22230010 F01020476 G15850200 G22270134 G15450061 F01430023 F01200270 G22270369 G22230012 G20970035 F01200293 F06010160 F05150479 G22250274 G15450342 F03151257 G66248227 F01200306 F20110770 G20970142 G15450390 F03151200 G15450270 F03100391 G22230014 G15450091 G15450051 F01020472 G15450280 F03100506 G22270093 F01020050 F05150058 G10150291 F08011711 F05050020 F03151206 F06010161 G15450310

Descrizione

Description

Benennung

Descripcion

VITE M 6X 1X 70 U5737 8.8 ZG ROS.M6 6,4X 11X0,7 U8842J ZG ROS.M6 6,4X 18X 2 U6593 ZG TAPPO 700 M52X2 CONVOGLIATORE 12 USCITE DADO M24X 2 D982 8 ZG PIASTRINA DI TENUTA RONDELLA DI FERMO INVOLUCRI DEPRESSORE VITE 6 X16 5739 8.G ZN GIRANTE PROTEZIONE CINGHIA 1000 GIRI DADO M 6X 1 D980 8 ZG ANELLO ARR.30 UNI 7435-75 ANELLO ARR.72 UNI 7437-75 CUSCINETTO 6306 2RS C3 EX SKF DISTANZIALE CUSCINETTI VITE M10X 1,5X30 U5739 8.8 ZG INCASTELLATURA DEPRESSORE SUPPORTO VACUOMETRO SP SUPPORTO SX ROS.M10 10,5X 18X0,9 U8842J ZG DADO 10 5588 6.8 ZN P.DI P.CON CODOLO PULEGGIA MOTRICE RONDELLA 32X4X13 DADO M12X1,75 U5588 6.8 ZG CINGHIA POLY V 1287 J-16 GOLE ROND.APPOGGIO MANOMETRI SV COLLEGAMENTO MANOMETRI SP-SV PROTEZ.CINGHIA DEPRES.COMPLETO VACUOM.0-100 MBAR C.SMORZ.INC. CUFFIA PROTEZIONE P.D.P. DADO 14 5588 6.8 ZN CAVALLOTTO M14X96-119 ZN RONDELLA 32X4X15,5 PULEGGIA CONDOTTA RACCORDO 90° C5 1/8' 6/8 VITE 10X130 8.8 FIL.60 ZN TUBO POLIURETANO 8-6 DISTANZIALE SUPPORTO PULEGGIA CONDOTTA SUPPORTO DX VITE M10X 1,5X25 U5739 8.8 ZG PROTEZIONE DEPRESSORE TUBO EOLO NL1 45 VACUOMETRO COMPL. SP LM VITE M 6X 1X 80 U5737 8.8 ZG FASCETTA POLYAM.7,8X550 31920 GRIGLIA PROTEZIONE ZN CARD.B1 Z6-Z6 L700 TAPPO SALVAFILETTO D.39 RACCORDO DIR. C1 1/8'' 6/8 CINGHIA POLY-V 1016 J-16 GOLE PULEGGIA MOTRICE 1000 GIRI

BOLT 6 X70 5737 8.G GALVANIZED WASHER D6 DIN 6798 D.INT.GALV. FLAT WASHER 6-6X 18X2 6593 ZN M52 X 2 PLUG CONVEYOR 12 OUTLETS NORMAL SELF-LOCK.NUT 24X2 GAL STOP PLATE STOP WASHER VACUUM PUMP CASINGS BOLT M 6X16 IMPELLER BELT GUARD 1000 RPM SELF LOCKING NUT M6 STOP RING 30 UNI 7435-75 STOP RING 72 UNI 7437-75 BEARING 6306 2RS C3 BEARING SPACER BOLT M 10X30 DIFFUSION AIR PUMP FRAME VACUUM METER SUPPORT SP

VIS 6 X70 5737 8.G ZN RONDELLE D6 DIN 6798 D. INT. Z ROND. PLATE 6-6X 18X2 6593 ZN BOUCHON M52 X 2 CONVOYEUR 12 SORTIES ECROU AUTOB. NOR. 24X2 ZN PLAQUETTE DE TENUE RONDELLE DE BLOCAGE ENVELOPPES DEPRESSEUR H VIS M 6X16 ROUE TURBINE PROTECTION COURROIE 1000 TOURS ECROU AUTOBL. M6 BAGUE ARRET 30 UNI 7435-75 BAGUE ARRET 72 UNI 7437-75 PALIER 6306 2RS C3 ENTRETOISE PALIERS VIS M 10X30 B-TI POMPE A D+PRESSION SUPPORT VACUOMETRE SP

SCHRAUBE 6 X70 5737 8.G ZN UNT. SCHEIBE D6 DIN 6798 D. IN SCHEIBE 6-6X 18X2 6593 ZN PFROPFEN M52 X 2 TRICHTER MIT 12 AUSG-NGEN MUTTER AUTOB.NOR.24X2 ZN DICHTPLZTTCHEN FESTSTELLSCHEIBE sLLEN VAKUUMPUMPE C SCHRAUBE M 6X16 LAUFRAD RIEMENSCHUTZ 1000 UMDR. SELBSTSPERR.MUTTER M6 RING 30 UNI 7435-75 RING 72 UNI 7437-75 LAGER 6306 2RS C3 DISTANZSTsCK LAGER SCHRAUBE M 10X30 GESTELL VAKUUMPUMPE HALTERUNG VAKUUMMETER SP

TORNILLO 6 X70 5737 8.G ZN ARANDELA D6 DIN 6798 D.INT.ZN ARAND. PLANA 6-6X 18X2 6593 ZN TAPN M52 X 2 D TRANSPORTADOR 12 SALIDAS TUERCA AUTOB. NOR.24X2 ZN PLACA DE RETENCIN P ARANDELLA DE BLOQUEO AJAS BOMBA VACO CA TORNILLO M 6X16 RODETE PROTECCIN CORREA 1000 REV. P DADO AUTOBL. M6 ANILLO PARADA 30 UNI 7435-75 ANILLO PARADA 72 UNI 7437-75 COJINETE 6306 2RS C3 DISTANCIADOR COJINETES TORNILLO M 10X30 ARMAZËN BOMBA VAC-O SOPORTE VACUMETRO SP S

WASHER D10 DIN 6798 D.INT.ZN NUT M10 POWER TAKE-OFF- W/ SPIGOT DRIVING PULLEY WASHER 32X4X13 NUT M12 BELT- POLY V 1287 J-16 GOLE PRESSURE GAUGE REST WASHER PRESSURE GAUGE CONNECT. SP-SV

RONDELLE D10 DIN 6798 D. INT. ECROU M10 PRISE DE FORCE AVEC CONE POULIE MOTRICE 540T RONDELLE 32X4X13 ECROU M12 COURROIE POLY V 1287 J-16 CANN ROND. LOGEMENT MANOMETRES SV RACCORD MANOMETRES SP-SV

UNT. SCHEIBE D10 DIN 6798 D.IN MUTTER M10 KRAFTABTRIEB MIT ENDSTsCK ANTRIEBSSCHEIBE UNTERLEGSCHEIBE 32X4X13 MUTTER M12 RIEMEN POLY V 1287 J-16 RILLEN STsTZSCHEIBE MANOMETER SV VERBINDUNG MANOMETER SP-SV

ARANDELA D10 DIN 6798 D.INT.ZN DADO M10 TOMA DE FUERZA CON MANGO POLEA MOTRIZ ARANDELA 32X4X13 DADO M12 CORREA POLY V 1287 J-16 GARGAN ARAND. SOPORTE MANOMETROS SV CONEXIN MANMETROS SP-SV LE

VACUUM METER 0-100 MBAR C.SMOR POWER TAKE-OFF PROTECTION HOUS NUT M14X2 U-BOLT M14X96 - 119 ZN WASHER 32X4X15-5 DRIVEN PULLEY D.28 UNION 90[ C5 1/8'' 6/8 GALVANIZ. SCREW 10X130 8.8 FIL PRESS. GAUGE PIPE L.250 SV SPACER DRIVEN PULLEY SUPPORT

VACUOMETRE 0-100 MBARS A/SUPPO PROTECTEUR PRISE DE PUISSANCE ECROU M14X2 CAVALIER M14X96 - 119 ZN RONDELLE 32X4X15-5 POULIE ENTRAINEE D. 28 RACCORD 90[ C5 1/8'' 6/8 VIS 10X130 8.8 FIL.60 ZN TUBE MANOMETRE L. 250 SV ENTRETOISE SUPPORT POULIE ENTRAINEE

VAKUUMMETER 0-100 MBAR M. DZMP SCHUTZKASTEN KRAFTABTRIEB MUTTER M14X2 VERBINDUNG M14X96 - 119 ZN UNTERLEGSCHEIBE 32X4X15-5 GETRIEBENE SCHEIBE D.28 ANSCHLUSSTsCK 90[ C5 1/8' 6/8 SCHRAUBE 10X130 8.8 GEW.60 ZN ROHR MANOMETER L.250 SV DISTANZSTsCK HALTERUNG GETRIEBENE RIEMENSCH

VACUM. 0-100 MBAR C.ATEN.INC.V ENVOLTURA PROTECCIN T. DE P. G DADO M14X2 PERNO EN U M14X96 - 119 ZN ARANDELA 32X4X15-5 POLEA CONDUCIDA D.28 UNIN 90 C5 1/8'' 6/8 RA TORNILLO 10X130 8.8 FIL.60 ZN TUBO MANMETRO L.250 SV T DISTANCIADOR SOPORTE POLEA CONDUCIDA

BOLT 10X25 5739 8.G GALVANIZED VACUUM PUMP PROTECTION EOLO PIPE 45 PU VACUUM METER ASSY. SP LM BOLT 6 X80 5737 8.G GALVANIZED POLYAMIDE FASTENING STRAPS 9X5 AIR PUMP PROTECT. GRID UNIVERSAL JOINT S10 0700F 112 CONVEYOR PLUG D.39 UNION STRAIGHT C1 1/8'' 6/8 BELT- POLY V 1016 J-16 GOLE DRIVING PULLEY 1000 REVS

VIS 10X25 5739 8.G ZN PROTECTION DEPRESSEUR

SCHRAUBE 10X25 5739 8.G ZN SCHUTZ VAKUUMPUMPE

TORNILLO 10X25 5739 8.G ZN PROTECCIN BOMBA DE VACO

VACUOMETRE COMPL. SP LM VIS 6 X80 5737 8.G ZN COLLIER POLYAMIDE 9X508 31920 GRILLE DE PROTECT.DISP. DEPRES CARD NORM S10 0700F1121121CAT BOUCHON PROTEGE-FILET D. 39 RACCORD DRT. C1 1/8'' 6/8 COURROIE POLY-V 1016 J-16 GORG POULIE MOTRICE 1000T

KOMPL. VAKUUMMETER SP LM SCHRAUBE 6 X80 5737 8.G ZN SCHELLE POLYAMID 9X508 31920 SCHUTZGITTER VAKUUMPUMPE KARDAN S10 0700F 112 112 1CAT GEWINDESCHUTZPFROPFEN D.39 ANSCHLUSSTsCK GERADE C1 1/8'' RIEMEN POLY-V 1016 J-16 RILLEN ANTRIEBSSCHEIBE 1000 UMDREHUNG

VACUMETRO COMPL. SP LM V TORNILLO 6 X80 5737 8.G ZN ABRAZADERA POLIAMIDA 9X508 319 REJILLA DE PROTECCIN BOMBA VAG CARDæN S10 0700F 112 112 1CAT TAPN GUARDARROSCA D.39 D UNIN DER. C1 1/8'' 6/8 R CORREA POLY-V 1016 J-16 GARGA POLEA MOTRIZ 1000 REVOLUCIONES

cod. G19530265

TAV. 82

(*) METALLO / METAL 32

28 14 A- 1 B- 2

31 40

38 39

33 12 11 25

15 10

7 4

16X16

19 21 (*)

31 8 16 8 12

11 25

20X20 20 (*)

31 8

6 27

cod. G19530265

TAV. 82

SCATOLA DI RINVIO ELEMENTO Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41

G15226290 G15226300 G15220691 G19002840 G20970032 G19005670 G22270452 G19005680 G20980024 G22220071 G22220073 G16620880 F02100110 G22220105 G22220155 G16620910 G16620900 G22270453 G22270454 G16620950 G16620940 G15225740 G15220681 G22505069 G66349001 F01020041 F01020403 F01020440 F01200244 F01260021 F01220011 F01220022 F02100114 F02100121 F01100011 F02050045 F02050179 G65338018 G65338039 G66248057 G66248102

Descrizione SCATOLA RINVIO Q.16 MT COMPL SCATOLA RINVIO Q.20 MT COMPL ASSE AVVISATORE MT COPRICARDANO SUPERIORE RONDELLA 32X4X8,5 BOCCOLA INT.SCATOLA RINVIO ALBERO SCATOLA RINVIO SP/S BOCCOLA EST.SCATOLA RINVIO BOCCOLA 15X8,5X8 AVVISATORE ACUSTICO RONDELLA 28X0,3X16,5 ASS.CONCHIGLIA DX SPINA E.P. 6X 26 U6873 C70 BR BOCCOLA DI SPINTA ELEM.TENUTA MOLLE COMP. SCATOLA RINVIO Q.20 COMPL SCATOLA RINVIO Q.16 COMPL SNODO AVVISATORE SP/S CROCIERA COMPL. SP/S KIT INGR.RINVIO ZAMA Q.20(1+1) KIT INGR.RINVIO ZAMA Q.16(1+1) ASSE AVVISATORE MT COMPL. INNESTO RINVIO MT CONCHIGLIA SX BOCCOLA VITE M 6X 1X 45 U5737 8.8 ZG VITE 6 X16 5739 8.G ZN VITE 8 X25 5739 8.G ZN DADO M 8X1,25 U5588 6.8 ZG DADO CIECO M8 U5721 5.8 ZG DADO M 6X 1 D980 8 ZG DADO M 8X1,25 D980 8 ZG SPINA E.P. 6X 30 U6873 C70 BR SPINA E.P. 6X 40 U6873 C70 BR ING.M 6X1 7663-A 9SMNPB28 ZG ANELLO E. DE 16X 1 U7435 C70 ANELLO E. DE 42X U7435 MOLLA COMP.ZN SCATOLA RINV.SP MOLLA COMP.ZN INNESTO SP SPINA DI SICUREZZA SP ANELLO SICUREZZA SP

cod. G19530265

Description

Benennung

Descripcion

SIGNALLING AXIS MT TOP CARDAN JOINT COVER WASHER 32X4X8-5

AXE AVERTISSEUR MT COUVRE-CARDAN SUPERIEUR RONDELLE 32X4X8-5

ACHSE SIGNALHUPE MT OBERE KARDANABDECKUNG UNTERLEGSCHEIBE 32X4X8-5

EJE INDICADOR MT CUBRECARDæN SUPERIOR ARANDELA 32X4X8-5

INTERMEDIATE BOX SHAFT

ARBRE TRANSMISSION SP/S

WELLE VORGELEGEGEHZUSE SP/S

æRBOL CAJA DE TRANSMISIN SP/SA

BUSHING 15X8-5X8 HOOTER WASHER 28X0-3X16-5

BOITE 15X8-5X8 SIGNALISATION ACOUSTIQUE RONDELLE 28X0-3X16-5

BsCHSE 15X8-5X8 HUPE UNTERLEGSCHEIBE 28X0-3X16-5

CASQUILLO 15X8-5X8 INDICADOR ACSTICO ARANDELA 28X0-3X16-5

PIN EL. 6 X26 DIN 1481 THRUST BUSHING SPRING SEAL ELEMENT ASSY.

FICHE EL.6 X26 DIN 1481 BOITE DE POUSSEE ELEMENT D'ETANCHEITE RESSORTS

SPANNSTIFT 6 X26 DIN 1481 SCHUBBsCHSE DICHTUNGSELEMENT FEDERN KOMP.

CLAVIJA EL.6 X26 DIN 1481 CASQUILLO DE APRIETE ELEM. RESISTENCIA MUELLES COMP

SIGNALLER ARTICULATION SP/S SPIDER SP/S

ARTICULATION SIGNALISATION SP/ CROSILLON COMPL CARDAN TRANSM

HUPGELENK SP/S GELENKKREUZ KOMPL. SP/S

ARTICULACIN AVISADOR SP/S CRUCETA COMPL. SP/S

COMPLETE HORN SHAFT TRANSMISSION COUPLING MT LEFT SHELL BUSHING BOLT 6 X45 5737 8.G GALVANIZED BOLT M 6X16 BOLT M8 X25 5739 8.8 ZN NUT M8 CAP NUT M8 5.8 ZN UNI 5721 SELF LOCKING NUT M6 SELF LOCKING NUT M8X1,25 980V ELASTIC PIN 6X30 ELASTIC PIN 6X40 SPHERE NIPPLE M6X1/A

AXE AVERTISSEUR MT COMPL. ACCOUPLEMENT TRANSMISSION MT COQUILLE GCH. BOITE VIS 6 X45 5737 8.G ZN VIS M 6X16 VIS M8 X25 5739 8.8 ZN ECROU M8 ECROU BORGNE M8 5.8 ZN UNI 57 ECROU AUTOBL. M6 ECROU AUTOBL. M8X1,25 980-V GOUJON ELASTIQUE 6X30 GOUJON ELASTIQUE 6X40 GRAISSEUR A BILLES M6X1/A

ACHSE SIGNALHUPE MT KOMPL. KUPPLUNG VORGELEGE MT SCHALE LINKS B_CHSE SCHRAUBE 6 X45 5737 8.G ZN SCHRAUBE M 6X16 SCHRAUBE M8 X25 5739 8.8 ZN MUTTER M8 BLINDE MUTTER M8 5.8 ZN UNI 57 SELBSTSPERR.MUTTER M6 SELBSTSP.MUTT. M8X1,25 980-V SPANNHUELSE 6X30 SPANNHUELSE 6X40 KUGELFETTBsCHSE M6X1/A

EJE AVISADOR MT COMPL. CONEXIN TRANSFERENCIA MT C MOLDE IZQ. CASQUILLO TORNILLO 6 X45 5737 8.G ZN TORNILLO M 6X16 TORNILLO M8 X25 5739 8.8 ZN DADO M8 TUERCA CIEGA M8 5.8 ZN UNI 572 DADO AUTOBL. M6 DADO AUTOBL. M8X1,25 980-V ESPINA ELASTICA 6X30 PASADOR 6X40 ENGRAS. DE ESFERAS M6X1/A

TRANSM. BOX COMP. SPRING . SP ZN COUPLING COMP. SPRING SP SAFETY PIN SP SAFETY RING

RESSORT COMPL. ZN TRANSMISSION RESSORT COMPL. ZN ACCOUPLEM. BROCHE PLASTIC SECURITE CARDAN BAGUE SECURITE SP

DRUCKFEDER ZN VORGELEGEGEHZUSE MUELLE COMP.ZN CAJA TRANSFER.. DRUCKFEDER ZN KUPPLUNG SP MUELLE COMP.ZN ACOPLAMIENTO SP SICHERHEITSSTIFT SP CLAVIJA DE SEGURIDAD SP SICHERHEITSRING SP ANILLO DE SEGURIDAD SP

TAV. 92

Varianti Arachidi - Ground nuts

48 15

58 40

5 23 19 26

30 18

30 41 33

2 (*) 4

46 48

14 8

30 66 50 51

43 20

32 35 16

(*) Kit ingranaggi cod. 22270390 (2+2 pezzi)

cod. G19530265

TAV. 92

DISTRIBUTORE SEMI Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67

G22230046 G22270390 G66248094 G66349008 G22230035 G22230040 G22230041 G15223701 G22230037 G16620470 G22230039 G66349002 G22270071 G22270204 G15225130 G15421151 G15225120 G22220073 F01420037 G18902951 G18903180 G19002620 G66248219 G16620540 G16620530 F01020403 F01020382 F01020432 F01020451 F01070011 F01240024 F01230019 F01200244 F01410023 F01410051 F01430059 F01460115 F02200137 F02100079 F02100083 F02150012 F02200200 G15421870 G15225140 G19002750 F01420036 F01020403 F01220011 G15220681 F01200220 F01430035 G16620010 F01020381 G22270133 G16620360 G18701890 F01030055 G15224471 G15201081 G22270128 G15422520 G22270132 G22230033 G22270095 G22270130 G18904240 F01020404

Descrizione

Description

Benennung

Descripcion

ASSE TRASMISSIONE DISCO KIT COPPIA CONICA DISTRIB.SEMI COPRICARDANO SP BOCCOLA COPERCHIO SCATOLA INGRAN. SELETTORE MOBILE COMPLETO SELETTORE FISSO COPERCHIO CORPO MT TENUTA GUARNIZIONE TAPPO CENTRALE H=7,5 PERNO COPERCHIO BOCCOLA SINT.BASSOFONDO BOCCOLA COLL.SINTER.20X24 PIASTRA ANTI TRABOCC.SEMI SP ASSE PORTA PIGNONE MT COMPL. FERMO MOLLA FALCIONE CORPO DI DISTRIBUZIONE MT RONDELLA 28X0,3X16,5 ROS.M6 6,4X 24X 2 U6593 ZG MOLLA SPEC.ZN SCARICO MOLLA CONVOGLIATORE MICRO GUARNIZIONE COP.DISTR.SP530-MT ANELLO PARAPOLVERE SP-520 PORTA DI PROTEZIONE PORTA DI CONTROLLO VITE 6 X16 5739 8.G ZN VITE M 5X0,8X 25 U5739 8.8 ZG VITE 8 X16 5739 8.G ZN VITE 8 X45 5739 8.G ZN VIT.A.4,2X1,41X 9,5 6950 4.8NI DADO M 8X1,25 U5448 5.8 ZG DADO M 5X 0,8 D982 8 ZG DADO M 8X1,25 U5588 6.8 ZG ROS.M5 5,3X 10X 1 U6592 ZG ROS.M8 8,4X 17X1,6 U6592 ZG ROS.M8 8,4X 15X0,8 U8842J ZG ROS.OND. 8,4X 15X0,5 BR D137A COPIGLIA 2X 15 U1336 ZG SPINA EL.5 X20 DIN 1481 SPINA EL.5 X24 DIN 1481 LINGUETTA 5X 5X 10 U6604A COPIGLIA 4X 70 U1336 ZG PORTA DI SCARICO DISTRIBUTORE CORPO DISTRIBUTORE MT COMPL. COPERCHIO SERBATOIO SEME 530 ROS.M6 6,4X 18X 2 U6593 ZG VITE 6 X16 5739 8.G ZN DADO M 6X 1 D980 8 ZG INNESTO RINVIO MT DADO M 5X 0,8 U5588 6.8 ZG ROS.M5 5,3X 10X0,6 U8842J ZG ESPULSORE SEMI BIETOLA VITE M5X 0,8X 20 U5739 A2 IX PIASTRINA ANTI TRABOC.SEMI MIN DIMA SELETTORE FISSO RONDELLA D.8,5 SVASATA ZN. VITE M 8X1,25X20 U5933 8.8 ZG SERBATOIO SEME COMPLETO MT COPERCHIO CORPO MT COMPL. SELETTORE MOBILE ARACHIDI SP CORPO DISTRIBUTORE ARACHIDI SP FINESTRELLA CONTR.ARACHIDI SP PORTA CONTROLLO SEME GRIGLIA PROTEZIONE SP PIASTRINA ANTI TRABOC.ARACHIDI MOLLA APERTURA PORTA CONTROLLO VITE M 6X 1X20 U5739 8.8 ZG

DISK GEAR AXLE KIT- SEED DISTR. CONICAL PAIR UNIVERSAL JOINT COVER SP BUSHING GEARWHEEL BOX COVER MOBILE SELECTOR ASSY. SELECTOR FIXED BODY COVER MT SEAL CENTRAL PLUG H=7.5 COVER PIN BUSHING- SINTERED 20X24 SINTERED COLLARED BUSH SEED ANTI-OVERFLOW PLATE SP COMPL. MT PINION-HOLDER SHAFT CUTTER SPRING STOP MT DISTRIBUTION ASSEMBLY WASHER 28X0-3X16-5 WASHER 6,6X24X2 6593 ZN SPEC SPRING ZN DISCHARGE MICRO CONVEYOR SPRING DISTR. COVER GASKET.SP530 DUST COVER RING SAFETY HATCH INSPECTION DOOR BOLT M 6X16 BOLT 5 X25 5739 8.G GALVANIZ. BOLT M 8X16 BOLT M 8X45 BOLT- SELF-TAPPING 4-2X9-5T.E. NUT 8 UNI 5448 5.8 ZN NORM.SELF-LOCKING NUT 5 GALVAN NUT M8 WASHER D5 UNI 6592 ZN PLANE WASHER D.8 WASHER D8 DIN 6798 D.INT.ZN WASHER D8 DIN 137/A SPLIT PIN 2 X15 1336 GALVAN. PIN EL. .5 X20 DIN 1481 PIN EL. 5 X24 DIN 1481 TAB 05X5X10 UNI6604 SPLIT PIN 4 X70 1336 GALVAN. DISTRIBUTOR DISCHARGE DOOR DISTRIBUTOR CASING SEED TANK COVER 530 FLAT WASHER 6-6X 18X2 6593 ZN BOLT M 6X16 SELF LOCKING NUT M6 TRANSMISSION COUPLING MT NUT 5 UNI 5588 6.8 GALVANIZED WASHER D5 DIN 6798 D.INT.ZN SUGAR BEET EJECTOR BOLT 5X20 5739 MINUTE SEED PLATE SP POSITION PLATE FOR FIXED SELEC FLARED WASHER D.8.5 ZN. BOLT M 8X20 SEED TANK ASSY. MT BODY COVER MT MOBILE SELECTOR- PEANUTS SP PEANUT DISTRIBUTION CASING PEANUT CONTRA. WINDOW SP SEED INSPECTION DOOR PROTECT. GRID SP PEANUT CLOSING PLATE SPRING BOLT 6X20 5739 8.G GALVANIZED

AXE ENTRAINEMENT DISQUE COUPLE CON DISTR GRAINES (2+2) COUVRE-CARDAN SP BOITE COUVERCLE BOITE ENGRENAGE SELECTEUR MOBILE COMPL. SELECTEUR FIXE COUVERCLE CORPS MT BLOQUAGE GARNITURE BOUCHON CENTRAL H=7,5 PIVOT COUVERCLE BOITE FRITTEE BOITE COLLIER FRITTEE 20X24 PLAQUE ANTI-DEBORD.T GRAINES S AXE PORTE-PIGNON MT COMPLET ARRET RESSORT HACHOIR CORPS DE DISTRIBUTION MT RONDELLE 28X0-3X16-5 RONDELLE 6,6X24X2 6593 ZN RESSORT TRAPPE VIDANGE RESSORT CONVOYEUR MICRO JOINT ETANCH PORTE SP530-MT BAGUE PARE-POUSSIERE SP-520 PORTE DE PROTECTION PORTE CONTROLE VIS M 6X16 VIS 5 X25 5739 8.G ZN VIS M 8X16 VIS M 8X45 VIS AUTOTAR. 4-2X9-5 T. E. COU ECROU 8 UNI 5448 5.8 ZN ECROU AUTOB.NOR.5 ZN ECROU M8 RONDELLE D5 UNI 6592 ZN RONDELLE D.8 RONDELLE D8 DIN 6798 D. INT. Z RONDELLE D8 DIN 137/A GOUPILLE 2 X15 1336 ZN FICHE EL. 5 X20 DIN 1481 FICHE EL. 5 X24 DIN 1481 LANGUETTE 05X5X10 UNI6604 GOUPILLE 4 X70 1336 ZN PORTE DE DECHARGEMENT DISTRIB, CORPS DISTRIBUTEUR COUVERCLE RES GRAINES 530-MT ROND. PLATE 6-6X 18X2 6593 ZN VIS M 6X16 ECROU AUTOBL. M6 ACCOUPLEMENT TRANSMISSION MT ECROU 5 UNI 5588 6.8 ZN RONDELLE D5 DIN 6798 D. INT. Z EXPULSEUR BETTES VIS 5X20 5739 PLAQUETTE GRAINES PETITES SP GABARIT POSITION SELECTEUR FIX RONDELLE D.8,5 +VAS+E ZN. VIS M 8X20 RESERVOIR GRAINES COMPL PLA MT COUVERCLE CORPS MT SELECTEUR MOBILE ARACHIDES SP CORPS DE DISTRIBUTION ARACHIDE FENETRE CONTR. ARACHIDES SP PORTE CONTROLE GRAINES GRILLE PROTECTION SP PLAQUETTE FERMETURE ARACH. SP RESSORT VIS 6X20 5739 8.G ZN

ACHSE SCHEIBENANTRIEB KIT KEGELTRIEB SAMEN SZAPPARAT KARDANABDECKUNG SP BsCHSE DECKEL ZAHNRZDERGEHZUSE KOMPL. BEWEGLICHER WZHLER FESTER WZHLER DECKEL KTRPER MT DICHTUNG ZENTRALER PFROPFEN H=7,5 DECKELZAPFEN SYNTH. B_CHSE ANSCHLUSSBUECHSE SINTER.20X24 SAMENsBERLAUFPLATTE SP RITZELTRAGACHSE MT KOMPL. FESTSTELLVOR. FEDER FUTTERSCHN STREUBEH-LTER MT UNTERLEGSCHEIBE 28X0-3X16-5 UNTERLEGSCHEIBE 6,6X24X2 6593 SPEZIALFEDER ZN ENTLADUNG FEDER MIKRO FTRDERER DICHTUNG SZAPPARATDECKEL SP530 STAUBSCHUTZRING SP-520 SCHUTZÍFFNUNG KONTROLLTsR SCHRAUBE M 6X16 SCHRAUBE 5 X25 5739 8.G ZN SCHRAUBE M 8X16 SCHRAUBE M 8X45 SELBSTSCHNEID. SCHRAUBE 4-2X9MUTTER 8 UNI 5448 5.8 ZN SELBSTSP. MUTTER NOR.5 ZN MUTTER M8 UNTERLEGSCHEIBE D5 UNI 6592 ZN SCHEIBE D.8 UNT. SCHEIBE D8 DIN 6798 D. IN UNTERLEGSCHEIBE D8 DIN 137/A SPLINT 2 X15 1336 ZN SPANNSTIFT 5X20 DIN 1481 SPANNSTIFT 5 X24 DIN 1481 FEDERKEIL 05X5X10 UNI6604 SPLINT 4 X70 1336 ZN ENTLADUNGSTsR SZAPPARAT SZAPPARATKTRPER SAMENBEHZLTERDECKEL 530 SCHEIBE 6-6X 18X2 6593 ZN SCHRAUBE M 6X16 SELBSTSPERR.MUTTER M6 KUPPLUNG VORGELEGE MT MUTTER 5 UNI 5588 6.8 ZN UNT. SCHEIBE D5 DIN 6798 D. IN AUSWERFER RÜBEN SCHRAUBE 5X20 5739 PLZTTCHEN KLEINE SAMEN SP EINSTELLEHRE F_R FIXEN ABSTREI F-CHERSCHEIBE D.8,5 ZN. SCHRAUBE M 8X20 SAMENBEHZLTER KOMPLETT MT DECKEL KTRPER MT BEWEGLICHER WZHLER ERDNsSSE SP VERTEILUNGSKTRPER ERDNsSSE LUKE ERDNUSSKONTROLLE SP KONTROLLTsR SAMEN SCHUTZGITTER SP ABSCHLUSSPLZTTCHEN ERDNsSSE SP FEDER SCHRAUBE 6X20 5739 8.G ZN

EJE TRANSMISIN DISCO A SET PAR CONICO DISTRIB. SEMILL CUBRECARDæN SP CASQUILLO TAPA CAJA ENGRAN. SELECTOR MVIL COMPLETO S SELECTOR FIJO TAPA CUERPO MT JUNTA ESTANCA TAPËN CENTRAL H=7,5 PERNO TAPA CASQUILLO SINT. CASQUILLO CONEX. SINTER.20X24 PLACA ANTI DESBORDAMIENTO SEMI EJE PORTA PIÐËN MT COMPL. BLOQUEO MUELLE GUADA¾ADORA ELEMENTO DE DISTRIBUCIËN MT ARANDELA 28X0-3X16-5 ARANDELA 6,6X24X2 6593 ZN MUELLE ESPEC. ZN DESCARGA MUELLE CONDUCTOR MICRO JUNTA TAPA DISTRIB.SP530 ANILLO GUARDAPOLVO SP-520 PUERTA DE PROTECCIËN PUERTA DE CONTROL TORNILLO M 6X16 TORNILLO 5 X25 5739 8.G ZN TORNILLO M 8X16 TORNILLO M 8X45 TORNILLO AUTORROSC. 4-2X9-5 TUERCA 8 UNI 5448 5.8 ZN TUERCA AUTOB. NOR. 5 ZN DADO M8 ARANDELA D5 UNI 6592 ZN ARANDELA D.8 ARANDELA D8 DIN 6798 D.INT.ZN ARANDELA D8 DIN 137/A PASADOR 2 X15 1336 ZN CLAVIJA EL.5 X20 DIN 1481 CLAVIJA EL.5 X24 DIN 1481 LENGsETA 05X5X10 UNI6604 PASADOR 4 X70 1336 ZN PUERTA DESCARGA DISTRIBUIDOR CUERPO DISTRIBUCIN C TAPA DEPSITO SEMILLA 530 A ARAND. PLANA 6-6X 18X2 6593 ZN TORNILLO M 6X16 DADO AUTOBL. M6 CONEXIN TRANSFERENCIA MT C TUERCA 5 UNI 5588 6.8 ZN ARANDELA D5 DIN 6798 D.INT.ZN EXPULSOR REMOLACHA TORNILLO 5X20 5739 PLAQUETA SEMILLAS PEQUE¾AS SP PLACA PARA LA POSICIËN SELECTO ARANDELA Ï 8,5 ABOCINADA ZN. TORNILLO M 8X20 DEPSITO SEMILLAS COMPLETO MT B TAPA CUERPO MT SELECTOR MVIL CACAHUETES. S CUERPO DE DISTRIBUC.CACAHUETES VENTANILLA CONTR. CACAHUETES. PUERTA DE CONTROL SEMILLAS REJILLA PROTECCIN SP G PLAQUETA CIERRE CACAHUETES SP MUELLE TORNILLO 6X20 5739 8.G ZN

cod. G19530265

TAV. 260 Codice Code Code Kodex Codigo 22230298 22230319 22230327 22230320 22230294

Nr e ø fori Nr and ø holes Nr et ø trous Nr und ø löcher Nr y ø agujeros 20 20 20 20 20

Coltura

Seeds

Cultures

0,8 (1) 1 (1) Cavolo broccolo Broccoli Chou-Broccoli 1,1 (1) Cavolo verza Cabbage,Savoy Chou de Milan 1,5 Zucchino Squash Courgette 2,1 Melone

Melon

Anguria

Watermelon

Cardo

Melon Pastèque

Tournesol

Samen

Semillas

Bróculi

Wirsing

Col de Milán

Beans

Haricot

Bohnen

Poroto

Peas

Pois

Erbsen

Maiz (Pequeño)

Mais (Grosso)

Corn (Big)

Mais (Gros)

Ceci

Pulses

Fagiolo borlotto

Beans

Sonnenblumen

Maiz (Grueso)

max. 41,7 cm.

Poroto

e cannellino Arachidi

Peanut

Arachidi

Peanut

Kürbis

4,5

Favino

Mais (Grosse) Bohnen

Girasol

Baumwohl

22230199

Maiz

22230295 10123760R 22230304 22230321 22230328 22230299 22230316 22230288 22230194

36 36 36 52 52 52 52 52 72

5,5 5,5 (2) 7 1,5 2,1 2,5 3,5 4,25 0,5 (1)

22230195

Haricot

Bohnen

Poroto

Fagiolo

Beans

Haricot

Bohnen

Poroto

Barbabietola

Beets

Betteraves

Rüben

Remolacha

Fagiolino

Beans (Little)

Haricot (Petit)

Grüne Bohnen

Judias verdes

Soia

Soyabeans

Soja

Endivia

Endive

Chicorèe

Winterendivien

Escarola

Lattuga

Lettuce

Laitue

Kopfsalat

Lechuga

0,8 (1) Endivia

Endive

Chicorèe

Winterendivien

Escarola

Lattuga

Lettuce

Laitue

Kopfsalat

Lechuga

Rapa

Turnip

Navet

Speiserüben

Nabo

Melon

Melone

Melón

Senape

Mustard

Moutarde

Senft

Wassermelone

Sandía

Finocchio

Fennel

Fenouil

Fenchel

Tournesol -

Sonnenblumen

min. 8 cm.

Anice

22230193

Girasol

Cotone

Cotton

Baumwohl

Mais (Piccolo)

Corn (Little)

Mais (Petit)

Mais (Klein)

Maiz (Pequeño)

Mais

Corn

Mais

Maiz

Mais (Grosso)

Corn (Big)

Mais (Gros)

Mais (Grosse)

Maiz (Grueso)

1,1 (1) Pomodoro

max. 32,1 cm.

Beans

Arachidi

1,1 (1) Pomodoro Lenticchia 1,5 Cetriolo

2,1

Haricot

Bohnen

1,5

Poroto

Tomato

Tomate

Cucumber

Tomate

22230213

Tomate -

Gurke

Pepino

Pomodoro conf. Tomato pilled

Tomate enrobè

Tomate pilliert

Tomate conf.

ø 2,5÷3,5 mm

Barbabietola

Beets

Betteraves

Rüben

Remolacha

Zucchino

Squash

Courgette

Kürbis

Calabacín

Melone

Melon

Melone

Melón

Anguria

Watermelon

Pastèque

Wassermelone

Sandía

Cardo

Sorgo

Sorghum -

Sorgo

Hirse

2,1

10124020R 22230256

72 72 72 72

2,5 3,5 4,25 4,5

Hinojo

Tomate

Rapa

Turnip

Navet

Speiserüben

Nabo

Finocchio

Fennel

Fenouil

Fenchel

Hinojo

Colza

Canola

Colza

Raps

Colza

Spinacio

Spinach

Epinard

Spinat

min. 2,9 cm. -

Espinaca

Ravanello

Radish

Radis

Radies

Rabanito

Asparagio

Asparagus

Asperge

Spargel

Espárrago

max. 11,6 cm.

Pomodoro conf. Tomato pilled

Tomate enrobè

Tomate pilliert

Tomate conf.

ø 2,5÷3,5 mm

Bieta a coste

Swiss Chard

Poirèe

Mangold

Acelga

Saggina

10124040R 22230198

Tomate

max. 16 cm.

Fagiolino

Beans (Little)

Haricot (Petit)

Grüne Bohnen

Judias verdes

Soia

Soyabeans

Soja

Soia

Soyabeans

Soja

min. 5,8 cm.

Sorgo -

Concombre

Sesamo

Tomato

Panico

22230257

e cannellino

min. 4 cm.

Pastèque

Sunflower

Beans

Melon

Girasole

max. 23,2 cm.

Fagiolo

Calabacín

Distanza semina Seeding dist. Dist. de semis Saatabstandes Dist. siembra

Arveja -

Watermelon

Ceci

22230051

Melone

Fagiolo borlotto

36 36

Anguria Cardo

22230317 22230196

Judias verdes

Fagiolo

min.10,4 cm.

Sandía

Mais (Klein)

4,5 5 5,5

Ginseng

Grüne Bohnen

Piselli

Wassermelone

Mais

26 26 26

Ginseng

Haricot (Petit)

Arveja

Mais (Petit)

22230050 22230303 22230049

Ginseng

Beans (Little)

Soja

Mais

2,5 3,5

Ginseng

Fagiolino

Erbsen

Corn (Little)

26 26

Ginseng

Soja

Corn

22230289 22230249

ø 3,5÷4,5 mm

Pois

Mais (Piccolo)

Courgette

Tomate conf.

ø 3,5÷4,5 mm

Soja

Mais

Squash

Tomate pilliert

ø 3,5÷4,5 mm

Peas

4,5 5,5

Tomate enrobè

ø 3,5÷4,5 mm

Soyabeans

20 20

Lupino

Pomodoro conf. Tomato pilled ø 3,5÷4,5 mm

Soia

22230048 22230047

1 (1) 1,5 Zucchino 2,1

Semillas

Piselli

Cotton

26 26 26

Samen

Calabacín

Cotone

10124030R 22230253 22230296

3,5

Cultures

Melón

Sunflower

2,5

Seeds

Kürbis

Girasole

Coltura

Melone

2,5 3,5

22230205

Nr e ø fori Nr and ø holes Nr et ø trous Nr und ø löcher Nr y ø agujeros

22230197

20 20

Haricot

Codice Code Code Kodex Codigo 22230290

Brokkoli

22230203 22230192

Distanza semina Seeding dist. Dist. de semis Saatabstandes Dist. siembra

cod. G19530265

TAV. 260

DISCHI DI SEMINA Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62

G10121460 G10123970 G10124010 G10124020 G10124030 G10124040 G10124050 G10124060 G10124070 G10124090 G10124100 G22230047 G22230048 G22230049 G22230050 G22230051 G22230192 G22230193 G22230194 G22230195 G22230196 G22230197 G22230198 G22230199 G22230203 G22230205 G22230213 G22230216 G22230217 G22230249 G22230250 G22230253 G22230256 G22230257 G22230287 G22230288 G22230289 G22230290 G22230294 G22230296 G22230297 G22230298 G22230299 G22230300 G22230301 G22230303 G22230304 G22230306 G22230316 G22230317 G22230318 G22230319 G22230320 G22230321 G22230322 G22230323 G22230324 G22230325 G22230326 G22230327 G22230328 G22230332

Descrizione

Description

Benennung

Descripcion

DISCO 96 FORI D 1,0 SP DISCO 102 F.D.2 SP DISCO 60 FORI D.4,5 SP LM DISCO 72 FORI D.4,25 SP LM DISCO ACC. 26 FORI D 1,0 SP DISCO ACC. 72 FORI D 2,5 SP DISCO ACC.104 FORI D 1,1 SP DISCO 26 F. D.4 DISCO 36 FORI D 1,7 SP LM DISCO 6 FORI D.4,5 DISCO 6 FORI D.3,0 DISCO 20 F. D.5,5 SP LM DISCO 20 F. D.4,5 SP LM DISCO 26 F. D.5,5 SP LM DISCO 26 F. D.4,5 SP LM DISCO 36 F. D.2,1 SP LM DISCO 20 FORI D.3,5 SP LM DISCO 72 FORI D.1,1 SP LM DISCO 72 FORI D.0,5 SP LM DISCO 72 FORI D.0,8 SP LM DISCO 36 FORI D.1,5 SP LM DISCO 36 FORI D.3,5 SP LM DISCO 72 FORI D.3,5 SP LM DISCO 36 FORI D.4,5 SP LM DISCO 20 F0RI D.2,5 SP LM DISCO 20 F. D.7,0 ARAC.SP LM DISCO 72 FORI D.2,1 SP LM DISCO 144 FORI D.1,1 SP LM DISCO 36 FORI D.5,5 SP LM DISCO 26 FORI D 3,5 SP LM DISCO 144 FORI D.2,1 SP LM DISCO 26 FORI D.1,5 SP LM DISCO 72 FORI D.4,5 SP LM DISCO 72 FORI D.1,5 SP LM DISCO 144 FORI D.1,5 SP LM DISCO 52 FORI D.4,25 SP LM DISCO 26 FORI D.2,5 SP LM DISCO 36 FORI D.2,5 SP LM DISCO 20 FORI D.2,1 SP LM DISCO 26 FORI D.2,1 SP LM DISCO 144 FORI D.0,8 SP LM DISCO 20 FORI D.0,8 SP LM DISCO 52 FORI D.2,5 SP LM DISCO POST.10G-3F-D2,1 SP LM DISCO 144 FORI D.0,5 SP LM DISCO 26 FORI D.5,0 SP LM DISCO 36 FORI D.7 LM DISCO 12 FORI D.2,1 SP LM DISCO 52 FORI D.3,5 SP LM DISCO 36 FORI D.1,1 SP LM DISCO 10 FORI D.1,5 SP LM DISCO 20 FORI D.1,0 SP LM DISCO 20 FORI D.1,5 SP LM DISCO 52 FORI D.1,5 SP LM DISCO 80 FORI D.1,5 SP LM DISCO 100 FORI D.1,5 SP LM DISCO 120 FORI D.1,5 SP LM DISCO 160 FORI D.1,5 SP LM DISCO 180 FORI D.1,5 SP LM DISCO 20 FORI D.1,1 SP LM DISCO 52 FORI D.2,1 SP LM DISCO 13 FORI D.3,5 SP LM

DISK 96 HOLES D.1,0 SP DISK 102 HOLES D. 2 SP DISK 60 HOLES D.4-5 SP LM DISK 72 HOLES D.4-25 SP LM STEEL DISK 26 HOLES D 1.0 SP DISK ST. 72 H. D 2,5 STEEL DISC 104 HOLES D 1.1 SP DISC 26 F. D.4 DISK 36 HOLES D.1.7 SP LM DISK 6 HOLES D.4,5 DISK 6 HOLES D.3,0 DISK 20 H. D.5-5 CORN SP LM DISK 20 H. D.4-5 SUNF..SP LM DISK 26 H. D.5-5 CORN SP LM DISK 26 H. D.4-5 CORN SP LM DISK 36 H. D.2-1 BEET.SP LM DISK 20 HOLES D.3-5 SP LM DISK 72 HOLES D.1-1 SP LM DISK 72 HOLES D.0-5 SP LM DISK 72 HOLES D.0-8 SP LM DISK 36 HOLES D.1-5 SP LM DISK 36 HOLES D.3-5 SP LM DISK 72 HOLES D.3-5 SP LM DISK 36 HOLES D.4-5 SP LM DISK 20 HOLES D.2-5 SP LM DISK 20 H. D.7-0 PEAN..SP LM DISK 72 HOLES D.2-1 SP LM DISK 144 HOLES D.1-1 SP LM DISK 36 HOLES D.5-5 SP LM DISK 26 HOLES D 3-5 SP LM DISK 144 HOLES D.2-1 SP LM DISK 26 HOLES D.1-5 SP LM DISK 72 HOLES D.4-5 SP LM DISK 72 HOLES D.1-5 SP LM DISK 144 HOLES D.1-5 SP LM DISK 52 HOLES D.4-25 SP LM DISK 26 HOLES D.2-5 SP LM DISK 36 HOLES D.2-5 SP LM DISK 20 HOLES D.2-1 SP LM DISK 26 HOLES D.2-1 SP LM DISK 144 HOLES D.0-8 SP LM DISK 20 HOLES D.0-8 SP LM DISK 52 HOLES D.2-5 SP LM DISK POST.10G-3F-D2-1 SP LM DISK 144 HOLES D.0-5 SP LM DISK 26 HOLES D.5-0 SP LM DISK 36 HOLES D.7 LM DISK 12 HOLES D.2-1 SP LM DISC 52 HOLES D.3-5 SP LM DISK 36 HOLES D.1-1 SP LM DISK 10 HOLES D.1-5 SP LM DISK 20 HOLES D.1-0 SP LM DISK 20 HOLES D.1-5 SP LM DISK 52 HOLES D.1-5 SP LM DISK 80 HOLES D.1-5 SP LM DISK 100 HOLES D.1-5 SP LM DISK 120 HOLES D.1-5 SP LM DISK 160 HOLES D.1-5 SP LM DISK 180 HOLES D.1-5 SP LM DISK 20 HOLES D.1-1 SP LM DISK 2 HOLES D.2-1 SP LM DISK 13 HOLES D.3.5 SP LM

DISQUE 96 TROUS D. 1,0 SP DISQUE 102 TROUS D. 2 SP DISQUE 60 TROUS D. 4-5 SP LM DISQUE 72 TROUS D. 4-25 SP LM DISQUE ACC. 26 TROUS D 1-0 SP DISQUE ACIER 72 TROUS D 2,5 DISQUE ACIER 104 TROUS D 1,1 DISQUE 26 TROUS D.4 DISQUE 36 TROUS D.1,7 SP LM DISQUE 6 TROUS D. 4,5 DISQUE 6 TROUS D. 3,0 DISQUE 20 TROUS D. 5-5 MAIS SP DISQUE 20 TROUS D. 4-5 TOURN. DISQUE 26 TROUS D. 5-5 MAIS SP DISQUE 26 TROUS D. 4-5 MAIS DISQUE 36 TROUS D. 2-1 BETTES DISQUE 20 TROUS D. 3-5 SP LM DISQUE 72 TROUS D. 1-1 SP LM DISQUE 72 TROUS D. 0-5 SP LM DISQUE 72 TROUS D. 0-8 SP LM DISQUE 36 TROUS D. 1-5 SP LM DISQUE 36 TROUS D. 3-5 SP LM DISQUE 72 TROUS D. 3-5 SP LM DISQUE 36 TROUS D. 4-5 SP LM DISQUE 20 TROUS D. 2-5 SP LM DISQUE 20 TROUS D. 7-0 ARACHID DISQUE 72 TROUS D. 2-1 SP LM DISQUE 144 TROUS D. 1-1 SP LM DISQUE 36 TROUS D. 5-5 SP LM DISQUE 26 TROUS D 3-5 SP LM DISQUE 144 TROUS D. 2-1 SP LM DISQUE 26 TROUS D. 1-5 SP LM DISQUE 72 TROUS D. 4-5 SP LM DISQUE 72 TROUS D. 1-5 SP LM DISQUE 144 TROUS D. 1-5 SP LM DISQUE 52 TROUS D. 4-25 SP LM DISQUE 26 TROUS D. 2-5 SP LM DISQUE 36 TROUS D. 2-5 SP LM DISQUE 20 TROUS D. 2-1 SP LM DISQUE 26 TROUS D. 2-1 SP LM DISQUE 144 TROUS D. 0-8 SP LM DISQUE 20 TROUS D. 0-8 SP LM DISQUE 52 TROUS D. 2-5 SP LM DISQUE ARRIERE 10G. 3 TROUS D2 DISQUE 144 TROUS D. 0-5 SP LM DISQUE 26 TROUS D. 5-0 SP LM DISQUE 36 TROUS D. 7 LM DISQUE 12 TROUS D. 2-1 SP LM DISQUE 52 TROUS D. 3-5 SP LM DISQUE 36 TROUS D. 1-1 SP LM DISQUE 10 TROUS D. 1-5 SP LM DISQUE 20 TROUS D. 1-0 SP LM DISQUE 20 TROUS D. 1-5 SP LM DISQUE 52 TROUS D. 1-5 SP LM DISQUE 80 TROUS D. 1-5 SP LM DISQUE 100 TROUS D. 1-5 SP LM DISQUE 120 TROUS D. 1-5 SP LM DISQUE 160 TROUS D. 1-5 SP LM DISQUE 180 TROUS D. 1-5 SP LM DISQUE 20 TROUS D. 1-1 SP LM DISQUE 52 TROUS D. 2-1 SP LM DISQUE 13 TROUS D.3-5 SP LM

SCHEIBE 96 LTCHER D.1,0 SP SCHEIBE 102 LTCHER D.2 SP SCHEIBE 60 LTCHER D.4-5 SP LM SCHEIBE 72 LTCHER D.4-25 SP SCHEIBE ZUB. 26 LTCHER D 1-0 S STAHLSCHEIBE 72 L. D 2,5 STAHLSCHEIBE 104 BOHR. D 1,1 SCHEIBE 26 B. D.4 SCHEIBE 36 LTCHER D.1,7 SP LM SCHEIBE 6 LTCHER D.4,5 SCHEIBE 6 LTCHER D.3,0 SCHEIBE 20 L. D.5-5 MAIS SP LM SCHEIBE 20 L. D.4-5 SONNENBLU. SCHEIBE 26 L. D.5-5 MAIS SP LM SCHEIBE 26 L. D.4-5 MAIS SCHEIBE 36 L.R. D.2-1 RsBEN SP SCHEIBE 20 LTCHER D.3-5 SP LM SCHEIBE 72 LTCHER D.1-1 SP LM SCHEIBE 72 LTCHER D.0-5 SP LM SCHEIBE 72 LTCHER D.0-8 SP LM SCHEIBE 36 LTCHER D.1-5 SP LM SCHEIBE 36 LTCHER D.3-5 SP LM SCHEIBE 72 LTCHER D.3-5 SP LM SCHEIBE 36 LTCHER D.4-5 SP LM SCHEIBE 20 LÖCHER D.2-5 SP LM SCHEIBE 20 L. D.7-0 ERDNUSS SP SCHEIBE 72 LTCHER D.2-1 SP LM SCHEIBE 144 LTCHER D.1-1 SP LM SCHEIBE 36 LTCHER D.5-5 SP LM SCHEIBE 26 LTCHER D 3-5 SP LM SCHEIBE 144 LTCHER D.2-1 SP LM SCHEIBE 26 LTCHER D.1-5 SP LM SCHEIBE 72 LTCHER D.4-5 SP LM SCHEIBE 72 LTCHER D.1-5 SP LM SCHEIBE 144 LTCHER D.1-5 SP LM SCHEIBE 52 LTCHER D.4-25 SP LM SCHEIBE 26 LTCHER D.2-5 SP LM SCHEIBE 36 LTCHER D.2-5 SP LM SCHEIBE 20 LTCHER D.2-1 SP LM SCHEIBE 26 LÖCHER D.2-1 SP LM SCHEIBE 144 LTCHER D.0-8 SP LM SCHEIBE 20 LTCHER D.0-8 SP LM SCHEIBE 52 LTCHER D.2-5 SP LM HINTERSCHEIBE 10G-3L-D2-1 SP L SCHEIBE 144 LTCHER D.0-5 SP LM SCHEIBE 26 LTCHER D.5-0 SP LM SCHEIBE 36 LTCHER D.7 LM SCHEIBE 12 LTCHER D.2-1 SP LM SCHEIBE 52 LTCHER D.3-5 SP LM SCHEIBE 36 LTCHER D.1-1 SP LM SCHEIBE 10 LTCHER D.1-5 SP LM SCHEIBE 20 LTCHER D.1-0 SP LM SCHEIBE 20 LTCHER D.1-5 SP LM SCHEIBE 52 LTCHER D.1-5 SP LM SCHEIBE 80 LTCHER D.1-5 SP LM SCHEIBE 100 LTCHER D.1-5 SP LM SCHEIBE 120 LTCHER D.1-5 SP LM SCHEIBE 160 LTCHER D.1-5 SP LM SCHEIBE 180 LTCHER D.1-5 SP LM SCHEIBE 20 LTCHER D.1-1 SP LM SCHEIBE 52 LTCHER D.2-1 SP LM SCHEIBE 13 LTCHER D.3-5 SP LM

DISCO 96 ORIFICIOS D. 1,0 SP DISCO 102 ORIFICIOS D. 2 SP DISCO 60 ORIFICIOS D.4-5 SP LM DISCO 72 ORIFICIOS D.4-5 SP LM DISCO AC. 26 ORIFICIOS D 1-0 S DISCO ACERO 72 ORIF. D 2,5 DISCO ACC.104 AGUJEROS D 1,1 DISCO 26 AGUJEROS Ï 4 DISCO 36 ORIFICIOS D.1,7 SP LM DISCO 6 ORIFICIOS D.4,5 DISCO 6 ORIFICIOS D.3,0 DISCO 20 ORIF. D.5-5 MAZ SP LD DISCO 20 ORIF. D.4-5 GIRA.SP L DISCO 26 ORIF. D.5-5 MAZ SP LD DISCO 26 ORIF. D.4-5 MAIZ SP L DISCO 36 ORIF. D.2-1 REMOLACHA DISCO 20 ORIFICIOS D.3-5 SP LM DISCO 72 ORIFICIOS D.1-1 SP LM DISCO 72 ORIFICIOS D.0-5 SP LM DISCO 72 ORIFICIOS D.0-8 SP LM DISCO 36 ORIFICIOS D.1-5 SP LM DISCO 36 ORIFICIOS D.3-5 SP LM DISCO 72 ORIFICIOS D.3-5 SP LM DISCO 36 ORIFICIOS D.4-5 SP LM DISCO 20 ORIF. D.2-5 SP LM DISCO 20 ORIF. D.7-0 CACAH. SP DISCO 72 ORIFICIOS D.2-1 SP LM DISCO 144 ORIFICIOS D.1-1 SP L DISCO 36 ORIFICIOS D.5-5 SP LM DISCO 26 ORIFICIOS D 3-5 SP LM DISCO 144 ORIFICIOS D.2-1 SP L DISCO 26 ORIFICIOS D.1-5 SP LM DISCO 72 ORIFICIOS D.4-5 SP LM DISCO 72 ORIFICIOS D.1-5 SP LM DISCO 144 ORIFICIOS D.1-5 SP L DISCO 52 ORIFICIOS D.4-25 SP L DISCO 26 ORIFICIOS D.2-5 SP LM DISCO 36 ORIFICIOS D.2-5 SP LM DISCO 20 ORIFICIOS D.2-1 SP LM DISCO 26 ORIFICIOS D.2-1 SP LM DISCO 144 ORIFICIOS D.0-8 SP L DISCO 20 ORIFICIOS D.0-8 SP LM DISCO 52 ORIFICIOS D.2-5 SP LM DISCO TRAS.10G. 3 ORIF. D2-1 S DISCO 144 ORIFICIOS D.0-5 SP L DISCO 26 ORIFICIOS D.5-0 SP LM DISCO 36 ORIFICIOS D.7 LM DISCO 12 ORIFICIOS D.2-1 SP LM DISCO 52 ORIFICIOS D.3-5 SP LM DISCO 36 ORIFICIOS D.1-1 SP LM DISCO 10 ORIFICIOS D.1-5 SP LM DISCO 20 ORIFICIOS D.1-0 SP LM DISCO 20 ORIFICIOS D.1-5 SP LM DISCO 52 ORIFICIOS D.1-5 SP LM DISCO 80 ORIFICIOS D.1-5 SP LM DISCO 100 ORIFICIOS D.1-5 SP L DISCO 120 ORIFICIOS D.1-5 SP L DISCO 160 ORIFICIOS D.1-5 SP L DISCO 180 ORIFICIOS D.1-5 SP L DISCO 20 ORIFICIOS D.1-1 SP LM DISCO 52 ORIFICIOS D.2-1 SP LM DISCO 13 ORIFICIOS D.3-5 SP

cod. G19530265

TAV. 105

83 85

44 45

75 78

5 27

40 38

28 29

22 23

34 14

21 30 27

60 59 51 58

8 81

48 2 63 69

35 14

49 47

21 18

24 3

10 2

36 46

7 4

53 21

20 52

1 71

70 5

6 11

14 7

286

220

90 91 72

13 80

253 DX

253 SX

1 89

cod. G19530265

TAV. 105

TELAIO ELEMENTO Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55

F01200244 F01020440 F01200270 G15223060 F01220048 G15224630 F01020512 G15225150 G65337040 G15224410 G15223071 G15420842 G15224900 F02200226 F01020508 G15225770 F01020481 F01020432 G15220631 G15223481 F01200244 G65337007 G22505109 G15220540 F01200232 G15223561 G66349003 G22505108 G18903140 F01410051 F01020179 G15225851 F01020449 G22230063 F05100193 F02100126 G22505058 G20970149 G22270235 F02100109 G18903740 F01020403 F01230022 G19002700 F01020408 G15224690 G22505056 G19705290 G18701820 G19203130 G20970035 G15220661 G15223501 G19203121 F02100094

Descrizione

Description

Benennung

Descripcion

DADO M 8X1,25 U5588 6.8 ZG VITE 8 X25 5739 8.G ZN DADO 10 5588 6.8 ZN ASS.PARALLELO SUPERIORE DADO M12X1,75 D980 8 ZG BOCCOLA BRACCIO VITE M12X1,75X35 U5739 8.8 ZG PIASTRA ATTACCO SEMINATORE MOLLA TRAZ.ELEMENTO MT600 ATTACCO MOLLA PARALLELO INFERIORE TAGLIENTE SPIANATERRA COPIGLIA 5X 25 U1336 ZG VITE 12X25 5739 8.G ZN SUPPORTO SPIANATERRA CORTO VITE M10X 1,5X40 U5739 8.8 ZG VITE 8 X16 5739 8.G ZN ASS.RASCHIATERRA DX. ASS.RASCHIATERRA SX. DADO M 8X1,25 U5588 6.8 ZG MOLLA TRAZ.ATT.3 PUNTI 12 F SP FERMO MOLLA AGGANCIO DADO M16X1,5 SX DADO M 6X 1 U5588 6.8 ZG PROTEZIONE DX BOCCOLA SINT. MOZZO BRACCI PARALLELOGRAMMA MOLLA GUIDATUBO ROS.M8 8,4X 17X1,6 U6592 ZG VITE M12X1,75X150 5737 8.8 ZG CORPO CENTRALE MT VITE 8 X35 5739 8.G ZN ELEMENTO ARTICOLATO CAPPUCCIO 5,95X19,05 GIALLO SPINA E.P. 6X 60 U6873 C70 BR VITE DI REGOLAZIONE POSTERIORE RONDELLA D.15X28X1,5 MANIGLIA REGOLAZIONE B4 SPINA E.P. 6X 24 U6873 C70 BR MOLLA FERMO MANIG.MAGICA < 03 VITE 6 X16 5739 8.G ZN DADO M 6X 1 D982 8 ZG PROTEZIONE FOTOCELLULA > VITE M 6X 1X 30 U5739 8.8 ZG SUPP.BILANCIERE PERNO TARGHETTA REG.DX RUOTE PROFOND RONDELLA 16,5X25X1,0 ZN BILANCIERE PRFONDITA' RONDELLA 32X4X13 ASS.RASCHIATERRA SX. ASS.RASCHIATERRA DX. TAGLIENTE INTERNO DISCHI MT SPINA E.P. 5X 60 U6873 C70 BR

NUT M8 BOLT M8 X25 5739 8.8 ZN NUT M10 UPPER PARALLEL SELF LOCKING NUT M12X1,75 980V ARM BUSHING SCREW M 12X35 COUPLING PLATE TRACTION SPRING MT600 SPRING CONNECTION LOWER PARALLEL EDGE SOIL LEVELLER SPLIT PIN 5 X25 1336 GALVAN. BOLT M 12X25 SOIL LEVELLER SUPPORT SHORT BOLT 10X40 5739 8.G GALVANIZED BOLT M 8X16 RIGHT SOIL-SCRAPER LEFT SOIL-SCRAPER NUT M8 TRACTION COUPLING SPRING 3 POI SPRING STOP LINKAGE NUT M16X1-5 LEFT NUT 6 UNI 5588 6.8 GALVANIZED RIGHT GUARD BUSHING- SINTERED PARALLELOGRAM ARM HUB PIPE GUIDE SUPPORT PLANE WASHER D.8 BOLT 12X150 5737 8.G GALVANIZ. CENTRAL CASING BOLT M 8X35 ARTICULATED ELEMENT CAP 5,95X19,05 YELLOW PIN EL. 6 X60 DIN 1481 REAR ADJUSTMENT BOLT WASHER D.15X28X1-5 ADJUSTMENT HANDLE B4 PIN EL. .6 X24 DIN 1481 HANDLE STOP SPRING MAGICA 2003 BOLT M 6X16 NORM.SELF-LOCKING NUT 6 GALVAN PHOTOCELL PROTECTION BOLT M 6X1X30 ROCKERS SUPPORT PIN PLATE WASHER 16.5 X 25 X 1- GALVAN. DEPTH EQUALISER WASHER 32X4X13 LEFT SOIL-SCRAPER RIGHT SOIL-SCRAPER INNER DISC CUTTING EDGE MT PIN EL. .5 X60 DIN 1481 *

ECROU M8 VIS M8 X25 5739 8.8 ZN ECROU M10 PARALL. SUP. ECROU AUTOBL. M12X1,75 980-V BOITE BRAS VIS M 12X35 PLAQUE DE RACCORD RESSORT TRACT. ELEMENT MT600 FIXATION RESSORT PARALL. INF. COUTRE CHASSE-MOTTE NIVELEUSE GOUPILLE 5 X25 1336 ZN VIS M 12 X 25 SUPPORT NIVELEUSE COURT VIS 10X40 5739 8.G ZN VIS M 8X16 RACLEUR DRT. RACLEUR GCH. ECROU M8 RESSORT TRACT. ATTELAGE 3 POIN ARRET RESSORT ATTELAGE ECROU M16X1-5 GCH ECROU 6 UNI 5588 6.8 ZN PROTECTION DRT BOITE FRITTEE MOYEU BRAS PARALLELOGRAMME RESSORT GUIDE-TUBE RONDELLE D.8 VIS 12X150 5737 8.G ZN CORPS CENTR. MT VIS M 8X35 ELEMENT ARTICULE CAPUCHON 5,95X19,05 FICHE EL. 6 X60 DIN 1481 VIS DE REGLAGE ARRIERE RONDELLE D. 15X28X1-5 POIGNEE REGLAGE B4 FICHE EL. 6 X24 DIN 1481 RESSORT ARRET POIG.MAGICA 2003 VIS M 6X16 ECROU AUTOB.NOR.6 ZN PROTECT CAPT PHOTOC SP3-MT-MG> VIS M 6X1X30 GR. SUPPORT BALANCIER PIVOT PLAQUET RONDELLE 16,5 X25 X1 ZN BALANCIER PROFONDEUR RONDELLE 32X4X13 RACLEUR GCH. RACLEUR DRT. TRANCHANT INT+RIEUR DISQUES MT FICHE EL. 5 X60 DIN 1481 *

MUTTER M8 SCHRAUBE M8 X25 5739 8.8 ZN MUTTER M10 PARALLELOGRAMM OBEN SIEHE 00553312 BsCHSE ARM SCHRAUBE M 12X35 KUPPLUNGSPLATTE ZUGFEDER ELEMENT MT600 FEDERANSCHLUSS PARALLELOGRAMM UNTEN SCHNEIDE ERDEBNER SPLINT 5 X25 1336 ZN SCHRAUBE M 12 X 25 ERDEBNERHALTERUNG KURZ SCHRAUBE 10X40 5739 8.G ZN SCHRAUBE M 8X16 ERDSCHABER RE ERDSCHABER LI MUTTER M8 ZUGFEDER 3 PUNKTE KUPPLUNG 12 FESTSTELLVORR. FEDER VERBINDUN MUTTER M16X1-5 LI MUTTER 6 UNI 5588 6.8 ZN SCHUTZ RE SYNTH. BUECHSE NABE PARALLELOGRAMM ARME FEDER ROHRFsHRUNG SCHEIBE D.8 SCHRAUBE 12X150 5737 8.G ZN MITTELKTRPER MT SCHRAUBE M 8X35 GELENKELEMENT HAUBE 5,95X19,05 SPANNSTIFT 6 X60 DIN 1481 HINTERE EINSTELLSCHRAUBE UNTERLEGSCHEIBE D.15X28X1-5 EINSTELLGRIFF B4 SPANNSTIFT 6 X24 DIN 1481 FEDER GRIFFSPERRE MAGICA 2003 SCHRAUBE M 6X16 SELBSTSP. MUTTER NOR.6 ZN SCHUTZ PHOTOZELLE SCHRAUBE M 6X1X30 EINHEIT KIPPHEBELHALTERUNG ZAPFEN PLATTE UNTERLEGSCHEIBE 16,5 X25 X1 ZN KIPPHEBEL TIEFE UNTERLEGSCHEIBE 32X4X13 ERDSCHABER LI ERDSCHABER RE INNERE SCHNEIDE SCHEIBEN MT SPANNSTIFT 5 X60 DIN 1481 *

DADO M8 TORNILLO M8 X25 5739 8.8 ZN DADO M10 PARALELO SUPERIOR DADO AUTOBL. M12X1,75 980-V CASQUILLO BRAZO TORNILLO M 12X35 PLACA DE CONEXIN MUELLE TRACC. ELEMENTO MT600 ENGANCHE MUELLE PARALELO INFERIOR FILO DE CORTE NIVELADORA PASADOR 5 X25 1336 ZN TORNILLO M 12 X 25 SOPORTE NIVELADORA CORTO TORNILLO 10X40 5739 8.G ZN TORNILLO M 8X16 RASCADOR DE TIERRA DER. RASCADOR DE TIERRA IZQ. DADO M8 MUELLE TRAC. CONEX. 3 PUNTOS 1 BLOQUEO MUELLE ENGANCHE TUERCA M16X1-5 IZQ TUERCA 6 UNI 5588 6.8 ZN PROTECCIN DER P CASQUILLO SINT. CUBO BRAZOS PARALELOGRAMA MUELLE GUA TUBOS A ARANDELA D.8 TORNILLO 12X150 5737 8.G ZN CUERPO CENTRAL MT TORNILLO M 8X35 ELEMENTO ARTICULADO CAPUCHN 5,95X19,05 CLAVIJA EL.6 X60 DIN 1481 TORNILLO DE REGULACIN TRASEROS ARANDELA D.15X28X1-5 MANIJA REGULACIN B4 M CLAVIJA EL.6 X24 DIN 1481 MUELLE BLOQUEO MAN. MAGICA 03 TORNILLO M 6X16 TUERCA AUTOB. NOR. 6 ZN PROTECCIN FOTOCLULA PR TORNILLO M 6X1X30 SOP. BALANCN S PERNO PLACA ARANDELA 16,5 X25 X1 ZN BALANCÍN PROFUNDIDAD ARANDELA 32X4X13 RASCADOR DE TIERRA IZQ. RASCADOR DE TIERRA DER. FILO INTERNO DISCOS MT CLAVIJA EL.5 X60 DIN 1481 *

cod. G19530265

TAV. 105

83 85

44 45

75 78

5 27

40 38

28 29

22 23

34 14

21 30 27

60 59 51 58

8 81

48 2 63 69

35 14

49 47

21 18

24 3

10 2

36 46

7 4

53 21

20 52

1 71

70 5

6 11

14 7

286

220

90 91 72

13 80

253 DX

253 SX

1 89

cod. G19530265

TAV. 105

TELAIO ELEMENTO Pos.

Cod.

56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93

F02100062 G22505048 F02100083 G22505110 G20970100 G19700810 F01200442 G19705280 G15223571 F01070047 G15225970 G15223140 G15224500 F02250066 G15225860 F01020470 G15225250 G15225260 G15225270 G15225390 G15225380 G15225370 F02200562 F01020225 G15110091 G22505037 F01200306 G22505102 F01020404 F01220011 G15225980 G18701880 G15226340 F06120240 G15226310 G18904540 G15226360 F01020436

Descrizione

Description

Benennung

Descripcion

SPINA EL.4 X24 DIN 1481 FERMO LEVA SPINA EL.5 X24 DIN 1481 LEVA AGGANCIO ELEMENTO RONDELLA 30X0,5X22 ACC. DECAL.REGOLAZIONE PROFONDITA' DADO M16X 1,5 U5589 6.8 ZG TARGHETTA REG.SX RUOTE PROFOND PROTEZIONE SX VIT.A.3,5X1,34X 9,5 6954 4.8NI FALCIONE CORTO INT.DISCHI COMP ASSE DISCHI SCIVOLO SCARICO SEMI RIVETTO A STRAPPO 3X9 ALL PROTEZIONE DISCHI VITE M10X 1,5X20 U5739 8.8 ZG SPIANATERRA L.220 SPIANATERRA L.253 DX SPIANATERRA L.253 SX LEVA SOLLEV.SEMINAT.COMPL MT LEVA SOLLEVAMENTO ELEMENTO TUBO R.35X15X1,5X750 FORATO SPINA DI SICUREZZA D.8X70 ZG VITE M14X 2X160 U5737 8.8 BR SCONTRO A U SCONTRO PIASTRA ATTACCO MT DADO 14 5588 6.8 ZN SCONTRO RINFORZO SERBATOIO VITE M 6X 1X20 U5739 8.8 ZG DADO M 6X 1 D980 8 ZG FALCIONE CORTO INT.DISCHI RONDELLA DI SPINTA RASCHIATERRA INT.DX RASCHIATERRA CIRCOLARE SUPP.RASCHIATERRA ZN MOLLA TRAZIONE ZN RASCHIATERRA INT.SX VITE 8 X20 5739 8.G ZN

PIN EL. 4 X24 DIN 1481 LEVER STOP PIN EL. 5 X24 DIN 1481 ELEMENT COUPLING LEVER WASHER 30X0-5X22 ACC. DEPTH ADJUSTMENT STICKER NUT 16X1-5 UNI 5589 6.8 GALVAN PLATE LEFT GUARD BOLT 3-5X 9-5 DIN 7981 COMPL. DISKS INNER COULTER DISC SPINDLE SEED DISCHARGE CHUTE POP RIVET 3X9 ALUMINIUM DISC PROTECTION BOLT M 10X20 SOIL LEVELLER L.220 SOIL LEVELLER L.253 - RIGHT SOIL LEVELLER L.253 - LEFT LIFTING LEVER COMPLETE LIFTING LEVER TUBE R.35X15X1,5X750 SPLIT PIN BOLT M 14 X160 5737 8.G STRIKER STRIKER PLATE ATT. MT NUT M14X2 STRIKER PLATE TANK REINFORCEME BOLT 6X20 5739 8.G GALVANIZED SELF LOCKING NUT M6 DISKS INNER COULTER WASHER

FICHE EL. 4 X24 DIN 1481 ARRET LEVIER FICHE EL. 5 X24 DIN 1481 LEVIER ATTELAGE ELEMENT RONDELLE 30X0-5X22 ACIER DECALC. REGLAGE PROFONDEUR ECROU 16X1-5 UNI 5589 6.8 ZN PLAQUET PROTECTION GCH VIS 3-5X 9-5 DIN 7981 HACHOIR INTERNE DISQUES COMPL. AXES DISQUES LANCOIR DECHARGE GRAINES RIVET 3 X 9 ALL PROTECTION DISQUE VIS M 10X20 NIVELEUSE L.220 NIVELEUSE L.253 - DRT. NIVELEUSE L.253 - GCH. LEVIER DE LEVAGE COMPLETE LEVIER DE LEVAGE TUBE R.35X15X1,5X750 GOUPILLE VIS M 14 X160 5737 8.G BRIDE 150 MM BUTEE PLAQUE FIXATION MT ECROU M14X2 BUTEE RENFORCEMENT RESERVOIR VIS 6X20 5739 8.G ZN ECROU AUTOBL. M6 HACHOIR INTERNE DISQUES RONDELLE

SPANNSTIFT 4 X24 DIN 1481 FESTSTELLVORRICHTUNG HEBEL SPANNSTIFT 5 X24 DIN 1481 KUPPLUNGSHEBEL ELEMENT UNTERLEGSCHEIBE 30X0-5X22 ACC. ABZIEHB. EINST. TIEFE MUTTER 16X1-5 UNI 5589 6.8 ZN PLATTE SCHUTZ LI SCHRAUBE 3-5X 9-5 DIN 7981 S-SCHARSCHEIBEN INNEN KOMPL. SCHEIBENACHSE RUTSCHE SAMENENTLADUNG REISSNIETE 3 X 9 ALU DISCSCHUTZ SCHRAUBE M 10X20 ERDEBNER L.220 ERDEBNER L.253 - RECHTS ERDEBNER L.253 - LINKS HEBELHUB KOMPLETT HEBELHUB ROHR R.35X15X1,5X750 BOLZEN SCHRAUBE M 14 X160 5737 8.G ANSCHLAG KUPPLUNGSPLATTEN-ANSCHLAG MT MUTTER M14X2 BEHZLTER VERSTZRKUNSANSCHLAG SCHRAUBE 6X20 5739 8.G ZN SELBSTSPERR.MUTTER M6 S-SCHARSCHEIBEN INNEN UNTERLEGSCHEIBE

CLAVIJA EL.4 X24 DIN 1481 BLOQUEO PALANCA CLAVIJA EL.5 X24 DIN 1481 PALANCA ENGANCHE ELEMENTO ARANDELA 30X0-5X22 ACC. CAL.REGULACIN PROFUNDIDAD TUERCA 16X1-5 UNI 5589 6.8 ZN PLACA PROTECCIN IZQ P TORNILLO 3-5X 9-5 DIN 7981 ARADO INTERNO DISCOS COMPL. EJE DISCOS PLANO INCLINADO DESCARGA SEMIL REMACHE DESGAR. 3 X 9 AL PROTECCIN DISCO TORNILLO M 10X20 NIVELADORA L.220 NIVELADORA L.253 - DER. NIVELADORA L.253 - IZQ. PALANCA LEVANTAMIENTO COMPL. PALANCA LEVANTAMIENTO TUBO R.35X15X1,5X750 PERNO TORNILLO M 14 X160 5737 8.G ELEMENTO DE EMPALME ELEMENTO DE EMPALME PLACA CONE DADO M14X2 ELEM.EMPALME REFUERZO DEPSITOC TORNILLO 6X20 5739 8.G ZN DADO AUTOBL. M6 ARADO INTERNO DISCOS ARANDELA

BOLT M 8X20

VIS M 8X20

SCHRAUBE M 8X20

TORNILLO M 8X20

cod. G19530265

TAV. 115

12 41

11 64

73 10

52 48 66

2 15 8

67 50 49

67 48

3 44 54

64 32 33

16 34

43 1

29 31

19 76

26 17 18 24

20 6 9

68 72

9 35

25 78

7 58

30 63

34 81 31 27 Disco assolcatore 26 "Protetto"

60 63 9 23 Rossa - Red

37 85 82 Nera - Black

38 59

63 65

63 9

84 63

63 9

cod. G19530265

TAV. 115

RUOTE DI DI PROFONDITA’ E DI COMPRESSIONE Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55

F01410037 F01020043 F02100110 G19002910 F01220048 F01020436 F01200244 G66349003 F01410051 G15226280 F01410076 G15220960 G15224610 F01020170 G22505059 F01100011 F01440079 G18701880 G15223831 F01020510 G20970035 G15223862 G15223870 G22505132 F02100118 F02050631 G66248248 G22505054 G15223851 G13825091 G15223651 G22310057 G13825081 F04010084 F02250520 F06120203 F06120188 F04100040 F01020436 F06120076 F06120181 F06120051 F06120075 F06120165 F06120050 G15224790 G15224800 G16242190 F04010164 G15224810 G15423850 F01040091 F01220022 G15225240 G18903740

Descrizione

Description

Benennung

Descripcion

ROS.M6 6,4X12,5X1,6 U6592 ZG VITE M 6X 1X 60 U5737 8.8 ZG SPINA E.P. 6X 26 U6873 C70 BR CONVOGLIATORE SEME PLASTICA DADO M12X1,75 D980 8 ZG VITE 8 X20 5739 8.G ZN DADO M 8X1,25 U5588 6.8 ZG BOCCOLA SINT. ROS.M8 8,4X 17X1,6 U6592 ZG INDICATORE PROFONDITA' COMPL ROS.M12 13X 24X2,5 U6592 ZG MANIGLIA REGOLAZIONE SUPPORTO RUOTE COMPRESSIONE MT VITE M12X1,75X100 5737 8.8 ZG MOZZO POSTERIORE ING.M 6X1 7663-A 9SMNPB28 ZG ROND.RASAM.26,2X34,8X0,5 IX RONDELLA DI SPINTA ATT.RASCHIATERRA SX VITE M12X1,75X30 U5739 8.8 ZG RONDELLA 32X4X13 RASCHIATERRA RUOTE COMPRESS. RUOTA PROFONDITA' MT BRACCIO RUOTA PROFONDITA' SPINA E.P. 6X 36 U6873 C70 BR ANELLO ARR.47 UNI 7437-75 TAPPO IN PLASTICA DISCO D.370 MT-600 ATTACCO RASCHIATERRA DX DISCO ASSOLCATORE D.373 SUPPORTO CUSCINETTO DISCO FLANGIA INTERNA DISCO DP BOCCOLA PARAPOLVERE DISCO CUSCINETTO 3303 2RS CONF.RIBATTINI TSC 6 X19,8 CERCHIO CON CUSC.X COP.400X115 COPERTURA RUOTA PROFONDITA' MT CUSCINETTO X CERCHIO 400X115 VITE 8 X20 5739 8.G ZN RUOTA DA 1 POLLICE MT ANELLO IN GOMMA 1 POLLICE MT CERCHIO PLA. 1'' COMPLETO RUOTA DA 2 POLLICI MT COPERTURA 2' X 13' CERCHIO PLA. 2'' COMPLETO RUOTA GHISA POST.COMPL. RUOTA POSTERIORE GS SUPPORTO CUSCINETTO CUSCINETTO 6204 2RS BOCCOLA 20,5X25X3 BOCCOLA RUOTA FERRO VITE M 8X1,25X20 U5931 8.8 ZG DADO M 8X1,25 D980 8 ZG ESTRATTORE DISCHI ELEMENTO MT MOLLA FERMO MANIG.MAGICA < 03

PLANE WASHER D.6 BOLT 6 X60 5737 8.G GALVANIZED PIN EL. 6 X26 DIN 1481 PLASTIC SEED CONVEYOR SELF LOCKING NUT M12X1,75 980V BOLT M 8X20 NUT M8 BUSHING- SINTERED PLANE WASHER D.8

RONDELLE D.6 VIS 6 X60 5737 8.G ZN FICHE EL.6 X26 DIN 1481 CONVOYEUR GRAINE PLASTIQUE ECROU AUTOBL. M12X1,75 980-V VIS M 8X20 ECROU M8 BOITE FRITTEE RONDELLE D.8

SCHEIBE D.6 SCHRAUBE 6 X60 5737 8.G ZN SPANNSTIFT 6 X26 DIN 1481 SAMENFTRDERER PLASTIK SIEHE 00553312 SCHRAUBE M 8X20 MUTTER M8 SYNTH. BUECHSE SCHEIBE D.8

ARANDELA D.6 TORNILLO 6 X60 5737 8.G ZN CLAVIJA EL.6 X26 DIN 1481 TRANSPORTADOR SEMILLAS DE PLAS DADO AUTOBL. M12X1,75 980-V TORNILLO M 8X20 DADO M8 CASQUILLO SINT. ARANDELA D.8

PLANE WASHER D12 UNI 6592 ZN ADJUSTMENT HANDLE COMPRESSION WHEEL SUPPORT MT BOLT M 12X100 REAR HUB SPHERE NIPPLE M6X1/A WASHER D.26,2X34,8X0,5 WASHER LEFT SOIL SCRAPER ATTACHMENT. BOLT M 12X30 WASHER 32X4X13 SOIL SCRAPER PRESS WHEEL DEPTH WHEEL MT DEPTH WHEEL ARMPIN EL. 6 X36 DIN 1481 STOP RING 47 UNI 7437-75 PLASTIC PLUG TOOTHED DISK D.370 MT-600 RIGHT SOIL SCRAPER ATTACHMENT FURROW OPENER DISK D.373 DISK BEARING SUPPORT INNER DISK FLANGE DP DISC DUST SEAL BUSH BEARING 3303 2RS PACK BLAD.MOUNT.TSC 6 X19-8 KG RING W/BEARING FOR COVER400X11 DEPTH WHEEL COVERING MT BEARING RING 400X115 BOLT M 8X20 RUBBERIZED WHEEL COVERING FARMF.R.COMPR.MT COMPLETE PLASTIC RIM RUBBERIZED WHEEL COVERING 2' X 13' COMPLETE PLASTIC RIM COMPL. REAR CAST IRON WHEEL REAR WHEEL BEARING SUPPORT BEARING 6204 2RS BUSH 20.5X25X3 STEEL WHEEL BUSH SCREW 8 X20 5931 8.G ZN SELF LOCKING NUT M8X1,25 980V SEED PLATE EXTRACTOR ELEM. MT HANDLE STOP SPRING MAGICA 2003

RONDELLE D12 UNI 6592 ZN POIGNEE REGLAGE SUPPORT ROUES DE COMPRESSION VIS M 12X100 MOYEU ARRIERE GRAISSEUR A BILLES M6X1/A RONDELLE D.26,2X34,8X0,5 RONDELLE CONNEXION RACLEUR GCH VIS M 12X30 RONDELLE 32X4X13 D+CROTTOIR ROUES DE COMPRESSIO ROUE PROFONDEUR MT BRAS ROUE PROFONDEUR FICHE EL. 6 X36 DIN 1481 BAGUE ARRET 47 UNI 7437-75 BOUCHON EN PLASTIQUE DISQUE D370 MT A/MOY-ROUL CONNEXION RACLEUR DRT DISQUE D. 373 6 T.D.6 SUPPORT PALIER DISQUE BRIDE INT. DISQUE DP DOUILLE PARE-POUSSI+RE DISQUE PALIER 3303 2RS PAQUET RIVETS TSC 6 X19-8 JANTE CON CUSC.X COP.400X115 COUVERTURE ROUE PROFONDEUR MT PALIER ROUE JAUG JANTE 400X115 VIS M 8X20 ROUE CAOUTCHOUTEE COUVERT FARMF ROUE COMPR 1"X12 JANTE PLAST. COMPLET ROUE CAOUTCHOUTEE COUVERT FARMF ROUE COMPR 2"X13 JANTE PLAST. COMPLET ROUE FONTE ARRI+RE COMPL+TE ROUE ARRIERE SUPPORT PALIER ROULEMENT 6204 2RS DOUILLE 20,5X25X3 DOUILLE ROUE FER VIS 8 X20 5931 8.G ZN ECROU AUTOBL. M8X1,25 980-V EXTRACTEUR DISQUE ELEMENT MT RESSORT ARRET POIG.MAGICA 2003

SCHEIBE D12 UNI 6592 ZN EINSTELLGRIFF DRUCKROLLENHALTERUNG MT SCHRAUBE M 12X100 HINTERNABE KUGELFETTBsCHSE M6X1/A UNTERLEGSCHEIBE D.26,2X35X0,5 UNTERLEGSCHEIBE ERDSCHABERANSCHLUSS LI SCHRAUBE M 12X30 UNTERLEGSCHEIBE 32X4X13 ABSTREIFER DRUCKROLLE TIEFENRAD MT TIEFENRADARM SPANNSTIFT 6 X36 DIN 1481 RING 47 UNI 7437-75 PLASTIKPFROPFEN SCHEIBE D.370 MT-600 ERDSCHABERANSCHLUSS RE SCHEIBE SZSCHARENREISSER D.373 SCHEIBENLAGERBsCHSE INNENFLANSCH SCHEIBE DP BUCHSE STAUBABDECKUNG SCHEIBE LAGER 3303 2RS PACKUNG NIETEN TSC 6 X19-8 REIFEN MIT LAGER F.MANT. 400X1 MANTEL TIEFENRAD' MT LAGER REIFEN 400X115 SCHRAUBE M 8X20 GUMMIRAD MANTEL FARMF.R.DRUCK .MT FELGE PLA. KOMPL. GUMMIRAD MANTEL 2' X 13' FELGE PLA. KOMPL. HINTERES GUSSEISENRAD KOMPL. HINTERRAD LAGERBsCHSE LAGER 6204 2RS BUCHSE 20,5X25X3 BÜCHSE EISENRAD SCHRAUBE 8 X20 5931 8.G ZN SELBSTSP.MUTT. M8X1,25 980-V SCHEIBENAUSZIEHER ELEMENT MT FEDER GRIFFSPERRE MAGICA 2003

ARANDELA D12 UNI 6592 ZN MANIJA REGULACI0N SOPORTE RUEDAS DE COMPRESION TORNILLO M 12X100 CUBO TRASERO ENGRAS. DE ESFERAS M6X1/A ARANDELA D.26,2X34,8X0,5 ARANDELA CONEX. RASCADOR DE TIERRA IZQ TORNILLO M 12X30 ARANDELA 32X4X13 RASCADOR TIERRA RUEDAS COMPRES RUEDA PROF.MT BRAZO RUEDA DE PROFUNDIDAD CLAVIJA EL.6 X36 DIN 1481 ANILLO PARADA 47 UNI 7437-75 TAPN DE PLæSTICO D DISCO D.370 MT-600 CONEX. RASCADOR DE TIERRA DER DISCO SURCADOR D.373 SOPORTE COJINETE DISCO BRIDA INTERIOR DISCO DP MANGUITO GUARDAPOLVO DISCO COJINETE 3303 2RS PAQU. DE REMACHES TSC 6 X19-8 LLANTA CON COJ. X COB. 400X115 CUBIERTA RUEDA PROFUNDIDAD MT COJINETE LLANTA 400X115 TORNILLO M 8X20 RUEDA DE CAUCHO CUBIERTA FARMF. R. COMPR. MT ARO PL-ST. COMPLETO RUEDA DE CAUCHO CUBIERTA 2' X 13' ARO PL-ST. COMPLETO RUEDA FUNDICIËN TRAS.COMPL. RUEDA TRASERO SOPORTE COJINETE COJINETE 6204 2RS MANGUITO 20,5X25X3 BUJE RUEDA DE HIERRO TORNILLO 8 X20 5931 8.G ZN DADO AUTOBL. M8X1,25 980-V EXTRACTOR DISCOS ELEMENTO MT MUELLE BLOQUEO MAN. MAGICA 03

cod. G19530265

TAV. 115

12 41

11 64

73 10

52 48 66

2 15 8

67 50 49

67 48

3 44 54

64 32 33

16 34

43 1

29 31

19 76

26 17 18 24

20 6 9

68 72

9 35

25 78

7 58

30 63

34 81 31 27 Disco assolcatore 26 "Protetto"

60 63 9 23 Rossa - Red

37 85 82 Nera - Black

38 59

63 65

63 9

84 63

63 9

cod. G19530265

TAV. 115

RUOTE DI DI PROFONDITA’ E DI COMPRESSIONE Pos.

Cod.

56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86

G15225020 F06120189 G15225012 F01020440 F06120145 G19703480 F02250066 F01230034 F01230022 F01440083 F04010131 F03011082 F03011083 F01020070 F06120233 F06120146 F06120147 F01020036 F06120232 F01020042 G15225500 G15225480 F03011075 G15225490 G15223651 G15225500 F06120090 F02200227 G56345119 G56345120 G15226270

Descrizione

Description

Benennung

Descripcion

RUOTA PROFONDITA' MT COMPL. COPERTURA FARMFLEX 400X65 RASCHIATERRA RUOTE COMPRES.65 VITE 8 X25 5739 8.G ZN SEMICERCHIO 400X65 TARGHETTA REG.RUOTE COMPRESS. RIVETTO A STRAPPO 3X9 ALL DADO M 8X1,25 D982 8 DADO M 6X 1 D982 8 ZG ROS. 17X40X0,5 D988 ST2K60 BR CUSCINETTO 6004 2RS EX. SKF GUARNIZIONE A LABBRO 26X20X5 GUARNIZIONE A LABBRO 30X20X7 VITI M 8X1,25X45 U5737 8.8 ZG DISTANZIALE RUOTA 2'' SEMICERCHIO PLA RUOTA 1'' SEMICERCHIO PLA RUOTA 2'' VITE M 6X 1X 25 U5737 8.8 ZG DISTANZIALE RUOTA 1'' VITE M 6X 1X 50 U5737 8.8 ZG DISCO ASSOLC.PROTETTO COMPL. FLANGIA INT.DISCO PROTTETTO ZN ANELLO DI TENUTA G24X32X4 BOCCOLA PARAP.DISCO PROTETTO SUPPORTO CUSCINETTO DISCO DISCO ASSOLC.PROTETTO COMPL. RUOTA PROFONDITA' TAMBURATA MT COPIGLIA 5X 30 U1336 ZG SEMICERCHIO PLAST.NERO 400X115 SEMICERCHIO FE NERO 400X115 MOLLA COMPL.

DEPTH WHEEL MT ASSY. COVERING FARMFLEX 400X65 SOIL SCRAPER PRESS WHEEL 65 BOLT M8 X25 5739 8.8 ZN HALF RIM 400X65 PLATE POP RIVET 3X9 ALUMINIUM SELF LOCKING NUT M8X1,25 NORM.SELF-LOCKING NUT 6 GALVAN WASHER 17X40X0,5 D988 ST2K60 BEARING 6004 LIP SEAL 26X20X5 LIP SEAL 30X20X7 BOLT 8 X45 5737 8.G GALVANIZED WHEEL SPACER 2'' PLASTIC WHEEL HALF RIM 1'' PLASTIC WHEEL HALF RIM 2'' BOLT 6 X25 5737 8.G GALVANIZED WHEEL SPACER 1'' BOLT 6 X50 5737 8.G GALVANIZ. COMPL. PROTECTED DISC COULTER INNER DISK FLANGE SEALING RING G24X32X4 BUSHING PARAP.DISCO PROTETTO DISK BEARING SUPPORT COMPL. PROTECTED DISC COULTER DEPTH WHEEL MT SPLIT PIN 5 X30 1336 GALVAN. PLASTIC WHEEL HALF RIM 400X115 HALF RIM 400X115

ROUE PROFONDEUR MT COMPL. COUVERTURE FARMFLEX 400X65 D+CROTTOIR ROUES DE COMPRESSIO VIS M8 X25 5739 8.8 ZN DEMI-JANTE 400X65 PLAQUET RIVET 3 X 9 ALL ECROU AUTOBL. M8X1,25 ECROU AUTOB.NOR.6 ZN RONDELLE 17X40X0,5 D988 ST2K60 ROULEMENT 6004 JOINT A L+VRE 26X20X5 JOINT A L+VRE 30X20X7 VIS 8 X45 5737 8.G ZN ENTRETOISE ROUE 2'' DEMI-JANTE PLAST. ROUE 1'' DEMI-JANTE PLAST. ROUE 2'' VIS 6 X25 5737 8.G ZN ENTRETOISE ROUE 1'' VIS 6 X50 5737 8.G ZN DISQUE DU SOC PROT+G+ COMPLET BRIDE INT. DISQUE BAGUE D'ETANCHEITE G24X32X4 BOITE PARAP.DISCO PROTETTO SUPPORT PALIER DISQUE DISQUE DU SOC PROT+G+ COMPLET ROUE PROFONDEUR MT GOUPILLE 5 X30 1336 ZN DEMI-JANTE PLAST. ROUE 400X115 DEMI-JANTE 400X115

TIEFENRAD MT KOMPLETT MANTEL FARMFLEX 400X65 ABSTREIFER DRUCKROLLE 65 SCHRAUBE M8 X25 5739 8.8 ZN HALBFELGE 400X65 PLATTE REISSNIETE 3 X 9 ALU SELBSTSP.MUTT. M8X1,25 SELBSTSP. MUTTER NOR.6 ZN SCHEIBE 17X40X0,5 D988 ST2K60 LAGER 6004 LIPPENMANSCHETTE 26X20X5 LIPPENMANSCHETTE 30X20X7 SCHRAUBE 8 X45 5737 8.G ZN ABSTANDST_CK RAD 2'' HALBFELGE PLA RAD 1'' HALBFELGE PLA RAD 2'' SCHRAUBE 6 X25 5737 8.G ZN ABSTANDST_CK RAD 1'' SCHRAUBE 6 X50 5737 8.G ZN GESCH_TZTE FURCHENFORMSCHEIBE INNENFLANSCH SCHEIBE DICHTRING G24X32X4 BUCHSE PARAP.DISCO PROTETTO SCHEIBENLAGERBsCHSE GESCH_TZTE FURCHENFORMSCHEIBE TIEFENRAD MT SPLINT 5 X30 1336 ZN HALBFELGE PLA RAD 400X115 HALBFELGE 400X115

RUEDA PROF.MT COMPL. CUBIERTA FARMFLEX 400X65 RASCADOR TIERRA RUEDAS COMPRES TORNILLO M8 X25 5739 8.8 ZN SEMIARO 400X65 PLACA REMACHE DESGAR. 3 X 9 AL DADO AUTOBL. M8X1,25 TUERCA AUTOB. NOR. 6 ZN ARANDELA 17X40X0,5 D988 ST2K60 COJINETE 6004 JUNTA DE REBORDE 26X20X5 JUNTA DE REBORDE 30X20X7 TORNILLO 8 X45 5737 8.G ZN DISTANCIADOR RUEDA 2'' SEMIARO PL-ST.RUEDA 1'' SEMIARO PL-ST.RUEDA 2'' TORNILLO 6 X25 5737 8.G ZN DISTANCIADOR RUEDA 1'' TORNILLO 6x50 5737 8.G ZN DISCO SURC.PROTEGIDO COMPL. BRIDA INTERIOR DISCO ANILLO AISLADOR G24X32X4 MANGUITO PARAP.DISCO PROTETTO SOPORTE COJINETE DISCO DISCO SURC.PROTEGIDO COMPL. RUEDA PROF.MT PASADOR 5 X30 1336 ZN SEMIARO PL-ST.RUEDA 400X115 SEMIARO 400X115

cod. G19530265

TAV. 331

26 15

29 16 18

14 8

9 13

25 12

1 2 9

21 28

6 7

5 12 11

cod. G19530265

TAV. 331

COPRISEMI ANTERIORI E POSTERIORI PER RUOTE A “V” Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

G15224182 G15224461 G15224451 G15224431 G15224440 G18904220 G20980050 G20980022 F01420060 F01020118 F01020077 F01410051 F01230034 F01020470 F01220033 G15223920 G20980081 F01020436 G15223900 G18902920 F01420048 F01020072 G22220059 F06220012 G22220060 F01220022 G15223910 G18902660 G18902910 F02100087 F02200363

Descrizione

Description

Benennung

Descripcion

SUPPORTO COPRISEME COPRISEME SX COPRISEME DX SCORRIMOLLA RONDELLA 6X28X2,5 ASOLATA MOLLA COPRISEME BOCCOLA 15X7X8,5 ZN BOCCOLA 18X10,25X7 ROS.M10 10,5X 30X2,5 U6593 ZG VITE M10X 1,5X60 U5737 8.8 ZG VITE M 8X1,25X60 U5737 8.8 ZG ROS.M8 8,4X 17X1,6 U6592 ZG DADO M 8X1,25 D982 8 VITE M10X 1,5X20 U5739 8.8 ZG DADO M10X 1,5 D980 8 ZG FERMO MOLLA SX BOCCOLA 25X12X16,25 VITE 8 X20 5739 8.G ZN PERNO AGGANCIO MOLLA MOLLA COPRISEME SX SP ROND.PIANA 9X 24X2 6593 ZN VITE M 8X1,25X50 U5737 8.8 ZG COPRISEME SINISTRO VOLANTINO M12X100 COPRISEME DESTRO DADO M 8X1,25 D980 8 ZG FERMO MOLLA DX MOLLA SPEC.ZN FERMO SV MINI MOLLA COPRISEME DX SP SPINA E.P. 5X 30 U6873 C70 BR COPIGLIA R 3X62

SEED COVER SUPPORT LEFT SEED COVER RIGHT SEED COVER

SUPPORT COUVRE-GRAINES COUVRE-GRAINES GCH. COUVRE-GRAINES DRT.

SAMENABDECKERHALTERUNG SAMENABDECKER LINKS SAMENABDECKER RECHTS

SOPORTE CUBRESEMILLAS CUBRESEMILLA IZQ. CUBRESEMILLA DER.

SLOT WASHER 6X28X2,5 SEED COVERING TINE BUSHING 15X7X8-5 ZN BUSHING 18X10-25X7 WASHER 10,5X30 BOLT 10X60 5737 8.G GALVANIZED BOLT M 8X55 PLANE WASHER D.8 SELF LOCKING NUT M8X1,25 BOLT M 10X20 SELF LOCKING NUT M10X1,5 980-V LEFT SPRING STOP BUSHING 25X12X16-25 BOLT M 8X20 SPRING HOOK PIN LEFT SEED COVER SPRING SP PLANE WASHER D.8 BOLT M 8X1,25X50 U5737 8.8 ZG LEFT CORN SEED COVER HANDWHEEL M12X100 RIGHT SEED COVER SELF LOCKING NUT M8X1,25 980V RIGHT SPRING STOP SPEC. GALV. SPRING STOP SV MIN RIGHT SEED COVER SPRING SP PIN EL. 5 X30 DIN 1481 SPLIT PIN R 3X62

RONDELLE A BOUTON.6X28X2,5 RESSORT COUVRE-GRAINES BOITE 15X7X8-5 ZN BOITE 18X10-25X7 RONDELLE 10,5X30 VIS 10X60 5737 8.G ZN VIS M 8X55 RONDELLE D.8 ECROU AUTOBL. M8X1,25 VIS M 10X20 ECROU AUTOBL. M10X1,5 980-V ARRET RESSORT GCH. BOITE 25X12X16-25 VIS M 8X20 PIVOT FIXATION RESSORT RESSORT COUVRE-GRAINE GCH SP RONDELLE D.8 VIS M 8X1,25X50 U5737 8.8 ZG COUVRE-GRAINES GCH. VOLANT M12X100 COUVRE-GRAINES DRT. ECROU AUTOBL. M8X1,25 980-V ARRET RESSORT DRT. RESSORT SPEC. ZN ARRET SV MINI RESSORT COUVRE-GRAINE DRT SP FICHE EL. 5 X30 DIN 1481 GOUPILLE R 3X62

TSENSCHEIBE 6X28X2,5 SAMENABDECKFEDER BsCHSE 15X7X8-5 ZN BsCHSE 18X10-25X7 SCHEIBE 10,5X30 SCHRAUBE 10X60 5737 8.G ZN SCHRAUBE M 8X55 SCHEIBE D.8 SELBSTSP.MUTT. M8X1,25 SCHRAUBE M 10X20 SELBSTSP.MUTT. M10X1,5 980-V FESTSTELLVORRICHTUNG FEDER LI. BsCHSE 25X12X16-25 SCHRAUBE M 8X20 ZAPFEN FEDERKUPPLUNG FEDER SAMENABDECKER LI SP SCHEIBE D.8 SCHRAUBE M 8X1,25X50 U5737 8.8 SAMENABDECKER LINKS HANDRAD M12X100 SAMENABDECKER RECHTS SELBSTSP.MUTT. M8X1,25 980-V FESTSTELLVORRICHTUNG FEDER RE. SPEZ.FEDER ZN FESTSTELL-VOR. S FEDER SAMENABDECKER RE SP SPANNSTIFT 5 X30 DIN 1481 SPLINT R 3X62

ARANDELA DE OJETE 6X28X2,5 MUELLE CUBRESEMILLAS CASQUILLO 15X7X8-5 ZN CASQUILLO 18X10-25X7 ARANDELA 10,5X30 TORNILLO 10X60 5737 8.G ZN TORNILLO M 8X55 ARANDELA D.8 DADO AUTOBL. M8X1,25 TORNILLO M 10X20 DADO AUTOBL. M10X1,5 980-V BLOQUEO MUELLE IZQ. CASQUILLO 25X12X16-25 TORNILLO M 8X20 PERNO ENGANCHE MUELLE MUELLE CUBRESEMILLAS IZQ SP ARANDELA D.8 TORNILLO M 8X1,25X50 U5737 8.8 CUBRESEMILLA IZQUIERDO VOLANTE M12X100 CUBRESEMILLA DERECHO DADO AUTOBL. M8X1,25 980-V BLOQUEO MUELLE DER. MUELLE ESPEC.ZN BLOQUEO SV MIN MUELLE CUBRESEMILLAS DER SP CLAVIJA EL.5 X30 DIN 1481 CHAVETA R 3X62

cod. G19530265

TAV. 280 11 15

9 19

16 18

17 10

3 5 4 6 7

19 3

22 23

cod. G19530265

RUOTA COMPRESSIONE FARMFLEX Ø370 (CON COPRISEME ANTERIORE) Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

F01020172 G15224290 F01200270 F01220033 F01220048 F01020470 G18902670 F01020445 G15224240 G15224230 F01200244 F01020472 G18701140 G14821590 G65336004 G15224260 G65337005 G15224250 G20970012 G15224280 G20980022 G15224180 G15224270 F01020118 G15224300

TAV. 280

Descrizione

Description

Benennung

Descripcion

VITE M12X1,75X110 5737 8.8 ZG MONT.SUPPORTO COPRISEME DADO 10 5588 6.8 ZN DADO M10X 1,5 D980 8 ZG DADO M12X1,75 D980 8 ZG VITE M10X 1,5X20 U5739 8.8 ZG MOLLA TRAZ.ZN PRESS.SV-MINI VITE 8 X30 5739 8.G ZN STAFFA REGOLAZ.MOLLA SUPPORTO RUOTA FARMFLEX DADO M 8X1,25 U5588 6.8 ZG VITE M10X 1,5X25 U5739 8.8 ZG RONDELLA 11 X35 X5 RUOTA FARMFLEX 370X165 PROF.A MOLLA SPEC.ZN AGG.SEMINAT. SP CATENA L.122 MOLLA TRAZ.CAMBIO SV FERMO MOLLA RONDELLA 32X4X11 COPRISEME SX BOCCOLA 18X10,25X7 SUPPORTO COPRISEME COPRISEME DX VITE M10X 1,5X60 U5737 8.8 ZG RUOTA FARMFLEX COMPL

BOLT 12X110 5737 8.G GALVANIZ. SEED COVERING WHEEL SUPPORT PO NUT M10 SELF LOCKING NUT M10X1,5 980-V SELF LOCKING NUT M12X1,75 980V BOLT M 10X20 GALV. PRESS. SV-MINI TRACT.SPR BOLT M 8X30 SPRING ADJUSTMENT BRACKET WHEEL SUPPORT FARMFLEX NUT M8 BOLT 10X25 5739 8.G GALVANIZED WASHER 11 X 35 X 5 FARMFLEX WHEEL 370X165 DEPTH.A SPEC SPRING- ZN ADD. SEEDER SP CHAIN L.122 TRACTION COUPLING SPRING- GEAR SPRING STOP WASHER 32X4X11 LEFT CORN SEED COVER BUSHING 18X10-25X7 SEED COVER SUPPORT RIGHT SEED COVER BOLT 10X60 5737 8.G GALVANIZED WHEEL- FARMFLEX

VIS 12X110 5737 8.G ZN MONT.SUPPORT RECOUVRE-GRAINES ECROU M10 ECROU AUTOBL. M10X1,5 980-V ECROU AUTOBL. M12X1,75 980-V VIS M 10X20 RESSORT TRACT.ZN PRESS.SV-MINI VIS M 8X30 BRIDE REGLAGE RESSORT SUPPORT ROUE FARMFLEX ECROU M8 VIS 10X25 5739 8.G ZN RONDELLE 11 X35 X5 ROUE FARMFLEX 370X165 PROF.A RESSORT SPEC. ZN ATTELAGE SEME CHAINE L.122 RESSORT TRACT.BOITE DE VITESSE ARRET RESSORT RONDELLE 32X4X11 COUVRE-GRAINES GCH. BOITE 18X10-25X7 SUPPORT COUVRE-GRAINES COUVRE-GRAINES DRT. VIS 10X60 5737 8.G ZN ROUE FARMFLEX COMPL.

SCHRAUBE 12X110 5737 8.G ZN MONT.ZUSTREIFERHALTERUNG MUTTER M10 SELBSTSP.MUTT. M10X1,5 980-V SIEHE 00553312 SCHRAUBE M 10X20 ZUGFEDER ZN DRUCK SV - MINI SCHRAUBE M 8X30 BsGEL FEDEREINSTELLUNG RADHALTERUNG FARMFLEX MUTTER M8 SCHRAUBE 10X25 5739 8.G ZN UNTERLEGSCHEIBE 11 X35 X5 RAD FARMFLEX 370X165PROF.A SPEZIALFEDER ZN SZELEM. KUPPL. KETTE L.122 ZUGFEDER GETRIEBE SV FESTSTELLVORRICHTUNG FEDER UNTERLEGSCHEIBE 32X4X11 SAMENABDECKER LINKS BsCHSE 18X10-25X7 SAMENABDECKERHALTERUNG SAMENABDECKER RECHTS SCHRAUBE 10X60 5737 8.G ZN RAD FARMFLEX KOMPL.

TORNILLO 12X110 5737 8.G ZN MONT.SOPORTE CUBRESEMILLA DADO M10 DADO AUTOBL. M10X1,5 980-V DADO AUTOBL. M12X1,75 980-V TORNILLO M 10X20 MUELLE TRACC.ZN PRES.SV-MINI TORNILLO M 8X30 ESTRIBO REGULAC.MUELLE SOPORTE RUEDA FARMFLEX DADO M8 TORNILLO 10X25 5739 8.G ZN ARANDELA 11 X35 X5 RUEDA FARMFLEX MUELLE ESPEC. ZN CONEX. SEMBRA CADENA L.122 MUELLE TRAC. CAMBIO SV BLOQUEO MUELLE ARANDELA 32X4X11 CUBRESEMILLA IZQUIERDO CASQUILLO 18X10-25X7 SOPORTE CUBRESEMILLAS CUBRESEMILLA DERECHO TORNILLO 10X60 5737 8.G ZN RUEDA FARMFLEX COMPL.

cod. G19530265

TAV. 350

2 3 4

9 5

4 3

6 5

cod. G19530265

COLTRO A DISCO STRIATO Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11

F01230131 F01220022 G19203730 G15226210 F04010156 G15226041 F01020325 F01020436 G20970100 G15226011 G15226220

TAV. 350

Descrizione

Description

Benennung

Descripcion

DADO M20X 2,5 D982 6 ZG DADO M 8X1,25 D980 8 ZG FONDELLO ZN FLANGIA SUPP.CUSCINETTO CUSC.d20 D47 B14 6204 2RSH DISCO STRIATO D.320 VITE M20X2,5X 90 U5737 10.9 ZG VITE 8 X20 5739 8.G ZN RONDELLA 30X0,5X22 ACC. SUPPORTO DISCO STRIATO KIT COLTRO DISCO STRIATO 6F.

SELF LOCKING NUT M20X2,5 D982 SELF LOCKING NUT M8X1,25 980V GALVAN. HOLDER BEARING SUPP. FLANGE

ECROU AUTOBL. M20X2,5 D982 6 ECROU AUTOBL. M8X1,25 980-V FOND ZN BRIDE SUPPORT PALIER

MUTTER M20X2,5 D982 6 ZG SELBSTSP.MUTT. M8X1,25 980-V BODENSCHEIBE ZN FLANSCH LAGERHALTERUNG

DADO AUTOBL. M20X2,5 D982 6 ZG DADO AUTOBL. M8X1,25 980-V FONDO ZN BRIDA SOPORTE COJINETE

DISK D.320 BOLT 20X90 5737 10.9G GALVANI BOLT M 8X20 WASHER 30X0-5X22 ACC. DISC COULTER SUPPORT DISC COULTER KIT

DISQUE D.320 VIS 20X90 5737 10.9G ZN VIS M 8X20 RONDELLE 30X0-5X22 ACIER SUPPORT COUTRE DISQUE KIT COUTRE DISQUE

SCHEIBE D.320 SCHRAUBE 20X90 5737 10.9G ZN SCHRAUBE M 8X20 UNTERLEGSCHEIBE 30X0-5X22 ACC. KOLTERSCHEIBEHALTERUNG KOLTERSCHEIBEKIT

DISCO D.320 TORNILLO 20X90 5737 10.9G ZN TORNILLO M 8X20 ARANDELA 30X0-5X22 ACC. SOPORTE CUCHILLA DE ARADO DISC KIT CUCHILLA DE ARADO DISCO

cod. G19530265

TAV. 292

4 6 13 3

2 12

ATTENZIONE! Per il collegamento elettrico seguire l'indicazione sul disinnesto elettrico. (+/-)

cod. G19530265

TAV. 292

ESCLUSIONE ELETTRICA FILE DI SEMINA Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13

G15225323 G16033701 G14821521 G15424060 G22270454 F02050606 G66248057 F02100114 G15423980 G16033750 G16033740 G18701970 G16033730

Descrizione

Description

Benennung

Descripcion

INNESTO ESCL.ELETTR.MT DISINNESTO ELETTRICO 180 COMPL FORCELLA FORCELLA ESCLUSIONE ELETTR. CROCIERA COMPL. SP/S ANELLO ARR.16 UNI 7435-75 SPINA DI SICUREZZA SP SPINA E.P. 6X 30 U6873 C70 BR FORCELLE SNODO ESCL.ELET.COMPL FERMO DISINNESTO ELETTRICO ZN DISTANZIALE DISINNESTO ELET.ZN RONDELLA 16X48X2,5 ADATTATORE CROCIERA

COMPL. ELECTRIC RELEASE 180 FORK FORK ELECTRIC DISABLE SPIDER SP/S STOP RING 16 UNI 7435-75 SAFETY PIN SP ELASTIC PIN 6X30 FORK ELECTRIC DISABLE COMPLET UNCOUPLING ELECTRIC STOP UNCOUPLING ELECTRIC SPACER WASHER 16X48X2,5 SPIDER ADAPTOR

D+BRAYAGE +LECTRIQUE 180 COMPL FOURCHETTE FOURCHETTE EXCL. +LECTRIQUE CROSILLON COMPL CARDAN TRANSM BAGUE ARRET 16 UNI 7435-75 BROCHE PLASTIC SECURITE CARDAN GOUJON ELASTIQUE 6X30 FOURCHETTE EXCL. +LECTR. COMPL ARRET DEBRAYAGE +LECT. ENTRETOISE DEBRAYAGE +LECT. RONDELLE 16X48X2,5 ADAPTATEUR CROISIERE

ELEKTRISCHE ENTKUPPLUNG 180 KO GABEL STAFEL ELEKT.AUSSCHALTU GELENKKREUZ KOMPL. SP/S RING 16 UNI 7435-75 SICHERHEITSSTIFT SP SPANNHUELSE 6X30 STAFEL ELEKT.AUSSCHALTU KOMPL. FESTSTELL. AUSKUPPLUNG EL. DISTANZST_CK AUSKUPPLUNG EL. UNTERLEGSCHEIBE 16X48X2,5 PASSST_CK GELENKKREUZ

DESCONEXIËN EL+CTRICA 180 COMP HORQUILLA HORQUILLA DESC.EL+CTRICA CRUCETA COMPL. SP/S ANILLO PARADA 16 UNI 7435-75 CLAVIJA DE SEGURIDAD SP ESPINA ELASTICA 6X30 HORQUILLA DESC.EL+CTRICA COMPL BLOQUEO DESCONEXIN EL. DISTANCIADOR DESCONEXIN EL. ARANDELA 16X48X2,5 ADAPTADOR CRUCETA

cod. G19530265

TAV. 124 4

17 10

33 42 31

34 21

33 1 14

2 38 68

99938231 Contaettari MECCANICO

41 23

40 22 72

69 71

23-23

9 28

53 22 25 mm

7.50-16 - 73 6.50/80-15 - 74 5.00-15 - 77

16 mm 13 20

20-20

37 5

43 16

63 - L. 195 64 - L. 225 65 - L. 375 66 - L. 475

7.50-16 - 75 6.50/80-15 - 76 5.00-15 - 78

16-23 23-16

7 3

61 - L. 1615 62 - L. 1760 33 54 - L. 500 31 55 - L. 1185 56 - L. 1200 57 - L. 1275 58 - L. 1450 59 - L. 1460 60 - L. 1800

45 46 47 49 50 15

23-16

30 20 mm

16-23

48 18

cod. G19530265

TAV. 124

CAMBIO Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55

G14830390 G15430292 G15430321 G15430331 G15430340 G15430382 G15430501 G15430711 G15431020 G18902970 F02250683 G20970142 G15421520 G22230094 G19203260 G22270152 G22270162 G22270163 F01020403 F01020404 G15110091 G22500091 G22500092 F01220011 G22505085 F01060040 F06220016 F01020225 F01020232 F01020432 F01020449 F01200220 F01200244 F01200306 F01410051 G22500085 F01430059 F02200228 G22500084 F04010310 F02050621 F06080008 F06080230 G66248162 G66248163 G66248164 G66248165 G66248166 G66248167 G66248168 G22500102 F01020380 F01220200 G22270127 G15120431

Descrizione

Description

Benennung

Descripcion

CUSCINETTO FORO QUADRO SCATOLA CAMBIO Q.150 RULLO TENDICATENA LEVA CAMBIO ASSE INGRANAGGI L.155 SCATOLA CAMBIO COMPL.150 DISTANZIALE INTERNO CAMBIO COPERCHIO CAMBIO FERMO VITE CAMBIO MOLLA TRAZ.CAMBIO ZN SP DADO CILINDRICO 8 TC 40 RONDELLA 32X4X15,5 FERMO ASSI TRASMISSIONE SUPPORTO CUSCINETTO VITE M5X115 ZN ING.Z 16-23 RUOTA-CAMBIO SP RINFORZO INGR.ASSE DA 20 SP BLOCCO CAMBIO ASSE DA 20 SP VITE 6 X16 5739 8.G ZN VITE M 6X 1X20 U5739 8.8 ZG SCONTRO A U BOCCOLA CUSCINETTO SUPPORTO CUSCINETTO DADO M 6X 1 D980 8 ZG FERMO ASSE IN LAMIERA BUL.M 8X1,25X 20 U5732 4.6 ZG VOLANTINO 3 LOBI D.60 VITE M14X 2X160 U5737 8.8 BR VITE M14X 2X200 U5737 8.8 ZG VITE 8 X16 5739 8.G ZN VITE 8 X35 5739 8.G ZN DADO M 5X 0,8 U5588 6.8 ZG DADO M 8X1,25 U5588 6.8 ZG DADO 14 5588 6.8 ZN ROS.M8 8,4X 17X1,6 U6592 ZG RONDELLA D.38X70XSP.5 PVC ROS.M8 8,4X 15X0,8 U8842J ZG COPIGLIA 5X 35 U1336 ZG FERMO ASSE CAVO DA 25 CUSCINETTO 61907-2RZ ANELLO ARR.35 UNI 7435-75 CATENA 1/2 ISO 083 16 MAGLIE CATENA 5/8 ISO 10B 46 MAGLIE INGRANAGGIO Z-17 SP INGRANAGGIO Z-18 SP INGRANAGGIO Z-19 SP INGRANAGGIO Z-20 SP INGRANAGGIO Z-21 SP INGRANAGGIO Z-22 SP INGRANAGGIO Z-23 SP FERMO ASSI VITE M 5X0,8X 20 U5739 8.8 ZG DADO M 5X 0,8 D980 8 ZG ASSE RUOTA CAMBIO 2F.L.500 SP ASSE TRASMISSIONE L.1185

SQUARE-HOLED BEARING GEARBOX Q.150 CHAIN STRETCHER ROLLER GEAR LEVER GEAR SPINDLE L.155 GEAR BOX COMPL. 150 GEARBOX INNER SPACER GEAR COVER GEAR SCREW STOP GALVAN. GEAR TRACT. SPRING SP CYLINDRICAL NUT 8 TC 40 WASHER 32X4X15-5 TRANSMISSION SHAFT STOP BEARING SUPPORT BOLT M5X115 ZN WHEEL- GEARBOX GEARS SP AXLE GEAR REINFORCEMENT 20 SP 20 CM SPINDLE GEARBOX SP BOLT M 6X16 BOLT 6X20 5739 8.G GALVANIZED STRIKER BEARING BUSHING BEARING SUPPORT SELF LOCKING NUT M6 PLATE AXLE STOP BOLT 8 X20 5732 4.6 GALVANIZED 3-LOBE HANDWHEEL D.60 BOLT M 14 X160 5737 8.G BOLT 14X200 5737 8.G GALVANIZ. BOLT M 8X16 BOLT M 8X35 NUT 5 UNI 5588 6.8 GALVANIZED NUT M8 NUT M14X2 PLANE WASHER D.8 WASHER D.38X70X5 PVC WASHER D8 DIN 6798 D.INT.ZN SPLIT PIN 5 X35 1336 GALVAN. SPINDLE STOP- 25 CABLE BEARING 61907-2RZ STOP RING 35 UNI 7435-75 CHAIN SECTION 1/2-3/16 16 MES CUT-DOWN CHAIN .ISO 10B-1 46-L GEAR Z-17 SP GEAR Z-18 SP GEAR Z-19 SP GEAR Z-20 SP GEAR Z-21 SP GEAR Z-22 SP GEAR Z-23 SP AXLE STOP BOLT 5X20 5739 8.G GALVANIZED NUT TRISTOP M 5 WHEEL AXLE - GEARBOX 2-ROW L. TRANSMISSION AXLE L1185

ROULEMENT AL+SAGE CARR+ BOITE DE VITESSE Q.150 ROULEAU TENDEUR DE CHAINE LEVIER BOITE DE VITESSE AXE ENGRENAGES L155 VOIR 15430382 ENTRETOISE INT. BOITE VITESSE COUVERCLE BOITE DE VITESSE ARRET VIS BOITE DE VITESSE RESS. TRACT. BOITE VITESSE ZN ECROU CYLINDRIQUE 8 TC 40 RONDELLE 32X4X15-5 BUT+E AXES TRANSMISSION SUPPORT PALIER VIS M5X115 ZN ENGR. Z 16-23 ROUE BOITE VIT. RENFORC. ENGREN. AXE DE 20 SP ENSEMBLE BOITE DE VITESSE VIS M 6X16 VIS 6X20 5739 8.G ZN BRIDE 150 MM BOITE PALIER SUPPORT PALIER ECROU AUTOBL. M6 ARRET AXE EN TOLE VIS 8 X20 5732 4.6 ZN VOLANT 3 LOBES D.60 VIS M 14 X160 5737 8.G VIS 14X200 5737 8.G ZN VIS M 8X16 VIS M 8X35 ECROU 5 UNI 5588 6.8 ZN ECROU M8 ECROU M14X2 RONDELLE D.8 RONDELLE D.38X70X5 PVC RONDELLE D8 DIN 6798 D. INT. Z GOUPILLE 5 X35 1336 ZN ARRET AXE CREUX DE 25 PALIER 61907-2RZ BAGUE ARRET 35 UNI 7435-75 TRONÃON CHA+NE 1/2-3/16 16 MAI TRONCON CHAINE ISO 10B-1 46 MA ENGRENAGE Z-17 SP ENGRENAGE Z-18 SP ENGRENAGE Z-19 SP ENGRENAGE Z-20 SP ENGRENAGE Z-21 SP ENGRENAGE Z-22 SP ENGRENAGE Z-23 SP ARRET AXES VIS 5X20 5739 8.G ZN ECROU TRISTOP M 5 AXE ROUE BOITE DE VITESSE AXE TRANSMISSION L.1185

VIERKANTLAGER GETRIEBEKASTEN Q.150 KETTENSPANNROLLE GETRIEBEHEBEL ACHSE ZAHNRZDER L.122 SIEHE 15430382 INNERES DISTANZSTsCK GETRIEBE GETRIEBEDECKEL FESTSTELLVORRICH. GETRIEBESCHR ZUGFEDER GETRIEBE ZN SP ZYLINDRISCHE MUTTER 8 TC 40 UNTERLEGSCHEIBE 32X4X15-5 ACHSENSPERREN ANTRIEB LAGERBsCHSE SCHRAUBE M5X115 ZN ZAHNRAD Z 16-23 GETRIEBERAD SP VERSTZRKUNG ACHSZAHNRAD 20 SP GETRIEBEBLOCK ACHSE 20 SP SCHRAUBE M 6X16 SCHRAUBE 6X20 5739 8.G ZN ANSCHLAG LAGERBsCHSE LAGERBsCHSE SELBSTSPERR.MUTTER M6 FESTSTELLVORRICHTUNG BLECHACHS SCHRAUBE 8 X20 5732 4.6 ZN HANDRAD.3L. D.60 SCHRAUBE M 14 X160 5737 8.G SCHRAUBE 14X200 5737 8.G ZN SCHRAUBE M 8X16 SCHRAUBE M 8X35 MUTTER 5 UNI 5588 6.8 ZN MUTTER M8 MUTTER M14X2 SCHEIBE D.8 UNTERLEGSCHEIBE D.38X70X5 PVC UNT. SCHEIBE D8 DIN 6798 D. IN SPLINT 5 X35 1336 ZN FESTSTELLVORR. ACHSE KABEL ZU LAGER 61907-2RZ RING 35 UNI 7435-75 KET.ABSCHN.1/2-3/16 16 GLIEDER KETTENLZNGE ISO 10B-1 46 GLIE ZAHNRAD Z-17 SP ZAHNRAD Z-18 SP ZAHNRAD Z-19 SP ZAHNRAD Z-20 SP ZAHNRAD Z-21 SP ZAHNRAD Z-22 SP ZAHNRAD Z-23 SP FESTSTELLVORRICHTUNG ACHSEN SCHRAUBE 5X20 5739 8.G ZN MUTTER TRISTOP M 5 GEBTRIEBERADACHSE 2R.L.500 SP sBERTRAGUNGSACHSE L.1185

COJINETE ORIFICIO CUADRADO CAJA DE CAMBIO VELOCIDAD Q.150 RODILLO TENSOR DE CADENA PALANCA DE CAMBIO EJE ENGRANAJES L.155 SCATOLA CAMBIO COMPL.150 DISTANCIADOR INTERIOR CAMBIO TAPA CAMBIO BLOQUEO TORNILLO MUELLE TRAC. CAMBIO ZN SP TUERCA CILINDRICA 8 TC 40 ARANDELA 32X4X15-5 TOPE EJES TRANSMISIËN SOPORTE COJINETE TORNILLO M5X115 ZN ENGRAN. Z 16-23 RUEDA-CAMBIO REFUERZO ENGRAN. EJE DE 20 SP BLOQUE CAMBIO EJE DE 20 SP TORNILLO M 6X16 TORNILLO 6X20 5739 8.G ZN ELEMENTO DE EMPALME CASQUILLO COJINETE SOPORTE COJINETE DADO AUTOBL. M6 BLOQUEO EJE DE CHAPA TORNILLO 8 X20 5732 4.6 ZN VOLDEL.3L. D.60 TORNILLO M 14 X160 5737 8.G TORNILLO 14X200 5737 8.G ZN TORNILLO M 8X16 TORNILLO M 8X35 TUERCA 5 UNI 5588 6.8 ZN DADO M8 DADO M14X2 ARANDELA D.8 ARANDELA D.38X70X5 PVC ARANDELA D8 DIN 6798 D.INT.ZN PASADOR 5 X35 1336 ZN BLOQUEO EJE CABLE DE 25 COJINETE 61907-2RZ ANILLO PARADA 35 UNI 7435-75 TRAMO CAD.1/2-3/16 16 ESLABONE TRECHO CADENA ISO 10B-1 46 ESL ENGRANAJE Z-17 SP ENGRANAJE Z-18 SP ENGRANAJE Z-19 SP ENGRANAJE Z-20 SP ENGRANAJE Z-21 SP ENGRANAJE Z-22 SP ENGRANAJE Z-23 SP BLOQUEO EJES TORNILLO 5X20 5739 8.G ZN TUERCA TRISTOP M 5 EJE RUEDA CAMBIO 2 FILAS. L.50 EJE TRANSMISIN L 1185 A

cod. G19530265

TAV. 124 4

17 10

33 42 31

34 21

33 1 14

2 38 68

99938231 Contaettari MECCANICO

41 23

40 22 72

69 71

23-23

9 28

53 22 25 mm

7.50-16 - 73 6.50/80-15 - 74 5.00-15 - 77

16 mm 13 20

20-20

37 5

43 16

63 - L. 195 64 - L. 225 65 - L. 375 66 - L. 475

7.50-16 - 75 6.50/80-15 - 76 5.00-15 - 78

16-23 23-16

7 3

61 - L. 1615 62 - L. 1760 33 54 - L. 500 31 55 - L. 1185 56 - L. 1200 57 - L. 1275 58 - L. 1450 59 - L. 1460 60 - L. 1800

45 46 47 49 50 15

23-16

30 20 mm

16-23

48 18

cod. G19530265

TAV. 124

CAMBIO Pos.

Cod.

56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78

G22270049 G22500105 G15131070 G20860090 G20870028 G22500096 G22500112 G22500103 G22500098 G22500086 G22500116 G22270218 G22270217 G65336098 F01410011 F01040025 G66248218 G19701451 G19701412 G19701450 G19701411 G19701402 G19701401

Descrizione

Description

Benennung

Descripcion

ASSE 4F.85-6F.50 L.1260 ASSE SX L=1275 ASSE TR.SEMIN.L.1450 5 FORI ASSE SX 5F.60 L.1460 ASSE SERB.LATO TRAS.6F.L.1800 TUBO ASSE L=1615 TUBO ASSE L=1760 TUBO F.75 L=195 TUBO F.75 L=225 ASSE CAVO DA 25 TUBO L=475 CONTAETTARI TEN. STAG. SP LM SUPP.CONTAETT. CAMB.35 SP LM MOLLA CONTAETTARI CAMB.35 SP ROS.M4 4,3X 9X0,8 U6592 ZG VITE M 4X 0,7X10 U5931 8.8 ZG RONDELLA DISTAN.SPAND. DECAL.CAMBIO RUOTA 7,50-16 DECAL.CAMBIO RUOTA 6,50-15 DECAL.CAMBIO RUOTA 7,50-16 DECAL.TAB.CAMB.SP RUOTA MAG. DECAL.CAMBIO RUOTA 5,00-15 DECALCOMANIA TABELLA CAMBIO SP

4-ROW SPINDLE - 85-6-ROW-50 L. AXLE LEFT L=1275 TRANSMISSION AXLE L1450 5 HOLE AXLE- LEFT 5-R.60 L.1460 AXLE- GEARBOX SIDE- 6-ROW L.18 PIPE AXLE L=1615 PIPE AXLE L=1760 PIPE F.75 L=195 PIPE F.75 L=225 SPINDLE- 25 CABLE PIPE L=475 HECTARE COUNTER SEAL SP LM HECTARE COUNTER GEAR SUPPORT 3 HECT. COUNT. GEAR SPRING 35 SP PLANE WASHER 4,5X 9 6592 BOLT 4 X10 5931 8.G GALVANIZ. MAN. SPR. SPACER WASHER GEARBOX WHEEL 7,50-16 STICKER GEARBOX WHEEL 6,50-15 STICKER GEARBOX WHEEL 7,50-16 STICKER GEAR CHART STICKER SP GEARBOX WHEEL 5,00-15 STICKER GEAR CHART STICKER SP

AXE 4 RANGEES 85-6 RANGEES 50 AXE GCH. L=1275 AXE TRANSMISSION L1450 5 TROUS AXE GCH. 5 RANGEES 60 L. 1460 AXE RESERVOIR COTE ENTRAINEMEN TUBE AXE L=1615 TUBE AXE L=1760 TUBE F. 75 L=195 TUBE F. 75 L=225 AXE 25 X 375 TUBE L=475 COMPT. D'HECT. ETANCHE SP LM SUPPORT COMPT. D'HECT. B. VIT. RESS. COMPTEUR D'HECTARES CH RONDELLE 4,5X 9 6592 VIS 4 X10 5931 8.G ZN RONDELLE ENTRETOISE EP. ENGRAI ETIQ. BOITE DE VIT. ROUE 7,50ETIQ. BOITE DE VIT. ROUE 6,50ETIQ. BOITE DE VIT. ROUE 7,50DECALC. TABLEAU BOITE DE V. SP ETIQ. BOITE DE VIT. ROUE 5,00DECALC. TABLEAU BOITE DE V. SP

ACHSE 4 REIHEN 85-6 REIH. 50 ACHSE LINKS L=1275 sBERTRAGUNGSACHSE L1450 5 LOCH ACHSE LI 5R.F.60 L.1460 ACHSE BEHZLTER ANTRIEBSS. 6F.L ROHR ACHSE L=1615 ROHR ACHSE=1760 SCHLAUCH F.75 L=195 SCHLAUCH F.75 L=225 ACHSE KABEL ZU 25 ROHR L=475 HEKTARZZHLER DICHT SP LM HALT. GETRIEBE HEKTARZZHLER 35 FEDER HEKTARZZHLER GETRIEBE.35 SCHEIBE 4,5X 9 6592 SCHRAUBE 4 X10 5931 8.G ZN ABSTANDSCHEIBE DsNGERSTREUER AUFKLEBER GETRIEBE RAD 7,50-16 AUFKLEBER GETRIEBE RAD 6,50-15 AUFKLEBER GETRIEBE RAD 7,50-16 ABZIEHB. TABELLE GETR. SP AUFKLEBER GETRIEBE RAD 5,00-15 ABZIEHB. TABELLE GETR. SP

EJE 4 FILAS. 85-6 FILAS. 50 L. EJE IZQ. L=1275 EJE TRANSMISIN L1450 5 ORIF. A EJE IZQ. 5 FILA. 60 L.1460 EJE DEPS. LADO TRANS. 6 FILA A TUBO EJE L=1615 TUBO EJE L=1760 TUBO F.75 L=195 TUBO F.75 L=225 EJE CABLE DE 25 TUBO L=475 CUENTA HECTAREAS ESTANCO SOPORTE CONTADOR HECT. CAMB.35 MUELLE CONTADOR DE HECTAREAS C ARANDELA 4,5X 9 6592 TORNILLO 4 X10 5931 8.G ZN ARANDELA DISTAN.ABONAD. CAL. CAMBIOVEL. RUEDA 7,50-16 CAL. CAMBIOVEL. RUEDA 6,50-15 CAL. CAMBIOVEL. RUEDA 7,50-16 CALCOMANIA TABLA CAMBIO SP CAL. CAMBIOVEL. RUEDA 5,00-15 CALCOMANIA TABLA CAMBIO SP

cod. G19530265

TAV. 134 46 47 - M14x220 59 - M14x160

6 30 29

7.50-16 - 31 6.50/80-15 - 65 5.00-15 - 73

66 - 6.50/80-15 (SX) 67 - 6.50/80-15 (DX)

36 - 7.50-16 32 - 5.00-15 - 6.50/80-15

7.50-16 - 70 5.00-15 - 6.50/80-15 - 1

58 - 7.50-16 16 - 5.00-15 - 6.50/80-15 25

3 24 23

15 8

7.50-16 - 72 5.00-15 - 6.50/80-15 - 4

7 6

17 18 19 20

45 - L. 1800 54 - L. 1000 55 - L. 800 10 - L. 1260

A 33

9 7.50-16 - 5 6.50/80-15 - 56 5.00-15 - 74

7.50-16 - 71 5.00-15 - 6.50/80-15 - 34

7.50-16 - 11 6.50/80-15 - 62 5.00-15 - 75

68 - 7.50-16 22 - 5.00-15 - 6.50/80-15

14 13 Ingranaggi trasmissione seminatori

< 2004 35 - 7.50-16 61 - 6.50/80-15 76 - 5.00-15

53 63 - 6.50/80-15 77 - 5.00-15

7.50-16 (DX) - 58 6.50/80-15 (DX) - 60 6.50/80-15 (SX) - 69 5.00-15 (DX) - 79 5.00-15 (SX) - 80

37 - 7.50-16 64 - 6.50/80-15 78 - 5.00-15

50 52

Ruote - Wheels - 5.00-15 - 5.00-12 - 6.00-16

Ruote - Wheels - 6.50/80-15 - 7.50-16 - 20x8.00-10 (*) - 26x12.00-12 (*) - 10.0x8/80-12 (*) - 10.0/75-15.3 (*) - 13.0/65-18 (*) (*) a saldare - by welding

A B

Z16

Z23

Z16

Z23

A B

Z16

Z23 r.l.

Z23

Z23 r.l.

Z16

Z23 r.l.

Ingranaggi trasmissione spandiconcime e microgranulatore

A B

Z10

Z15

Z30

Z25

cod. G19530265

TAV. 134

RUOTE DI TRASMISSIONE Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55

G16630360 F01020472 F01020481 G16630380 G15231161 F01200270 F04100137 F02050101 F01010365 G22270049 G15231171 F01420060 F01250040 F02200452 F01060047 G16630310 G18802880 F01420060 G19005070 F01410064 F01200244 G16630350 G22505085 G66248218 F01020432 G22220083 F01240024 G14830390 G22230094 F01220022 G15231141 G16630320 G19704690 F06080168 F06120400 G15231330 F06120208 G22220113 G16630390 G16630400 G16630410 G16630370 G16630420 G16630430 G20870028 G15110091 F01020235 F01200306 F02200452 G16630460 G16630470 F01020440 F01230034 G22230138 G22230142

Descrizione

Description

Benennung

Descripcion

CARTER SX VITE M10X 1,5X25 U5739 8.8 ZG VITE M10X 1,5X40 U5739 8.8 ZG SCONTRO 100X70-3 4F11 70X40 ASSE RUOTA 7.50 X 16 DADO 10 5588 6.8 ZN SUPPORTO FY 25 TF ANELLO E. DE 25X 1,2 U7435 C70 VITE M18X1,5X 50 U5740 8.8 ZG ASSE 4F.85-6F.50 L.1260 RASCHIATERRA RUOTA 7,50X16 ROS.M10 10,5X 30X2,5 U6593 ZG DADO COLON. 12X1.5 ZN SPINA SCATTO D.4,4 B/80 ZG BUL.M 8X1,25X 45 U5732 4.6 ZG SUPPORTO TRASMISSIONE SP540 BOCCOLA 8,1X14X25,2 INOX ROS.M10 10,5X 30X2,5 U6593 ZG INGRANAGGIO TENDICATENA Z8 ROS.M10 10,5X 20X 2 U6592 ZG DADO M 8X1,25 U5588 6.8 ZG CARTER DX FERMO ASSE IN LAMIERA RONDELLA DISTAN.SPAND. VITE 8 X16 5739 8.G ZN RONDELLA AD IMBOCCO DADO M 8X1,25 U5448 5.8 ZG CUSCINETTO FORO QUADRO SUPPORTO CUSCINETTO DADO M 8X1,25 D980 8 ZG SUPPORTO RUOTA 7.50 ATTACCO AL SUPPORTO RUOTA DECAL.DISP.CATENE/INGR.R.POST. CATENA 5/8 ISO 10B 86 MAGLIE COPERTURA 7.50-16 IM110 8PR TU ATTACCO AL SUPPORTO RUOTA CERCHIO 7.50-16 PV TU INGRANAGGIO Z-10 FERRO PIGNONE Z-15 ZN PIGNONE Z-16 ZN. PIGNONE Z-23 ZN. INGRANAGGIO R.LIBERA Z-23 ZN PIGNONE Z-25 ZN. PIGNONE Z-30 ZN. ASSE SERB.LATO TRAS.6F.L.1800 SCONTRO A U VITE M14X 2X220 U5737 8.8 ZG DADO 14 5588 6.8 ZN SPINA SCATTO D.4,4 B/80 ZG PROTEZIONE VALVOLA R5.00 PROTEZIONE VALVOLA R6.50 VITE 8 X25 5739 8.G ZN DADO M 8X1,25 D982 8 ASSE CAMBIO 4F.80-6F.45 L.1000 ASSE 4 FILE L.800

LEFT CASE BOLT 10X25 5739 8.G GALVANIZED BOLT 10X40 5739 8.G GALVANIZED STRIKER PLATE 100X70-3 4F 0 NUT M10 SUPPORT FY 25 TF 0 SCREW 18X55 MB 5740 8.G ZN 4-ROW SPINDLE - 85-6-ROW-50 L. WHEEL SOIL SCRAPER 7,50X16 WASHER 10,5X30 COLUMN NUT M12X1.5 STUD BOLT SNAP PIN D.4-4 B/80 BOLT 8X45 5732 4.6 GALVANIZED TRANSM.SUPPORT BUSHING 8,1X14X25,2 INOX WASHER 10,5X30 CHAIN TIGHTENER GEAR WASHER 10,5X21 NUT M8 RIGHT CASE PLATE AXLE STOP MAN. SPR. SPACER WASHER BOLT M 8X16 LEAD-IN WASHER NUT 8 UNI 5448 5.8 ZN SQUARE-HOLED BEARING BEARING SUPPORT SELF LOCKING NUT M8X1,25 980V WHEEL SUPPORT 7.50 SUPP. WHEEL COUPLING STICKER CUT-DOWN CHAIN .ISO 10B-1 86 COVERING 7.50-16 IM110 8PR TU SUPP. WHEEL COUPLING RING 7.50-16 PV TU GEAR Z-10 IRON PINION Z-15 ZN PINION Z-16 ZN. PINION Z-23 ZN. FREE WHEEL GEAR Z-23 PINION Z-25 ZN. PINION Z-30 ZN. AXLE- GEARBOX SIDE- 6-ROW L.18 STRIKER BOLT M14X 2X220 U5737 8.8 ZG NUT M14X2 SNAP PIN D.4-4 B/80 VALVE GUARD R5.00 VALVE GUARD R6.50 BOLT M8 X25 5739 8.8 ZN SELF LOCKING NUT M8X1,25 GEAR SPINDLE 4-ROW 80- 6-ROW.4 4-ROW SPINDLE L.800

CARTE GCH VIS 10X25 5739 8.G ZN VIS 10X40 5739 8.G ZN BUTEE 100X70-3 4F 0 ECROU M10 SUPPORT FY 25 TF 0 VIS 18X55 MB 5740 8.G ZN AXE 4 RANGEES 85-6 RANGEES 50 RACLEUR ROUE 7,50X16 RONDELLE 10,5X30 ECROU M12X1. 5 COLONNE FICHE A DETENTE D. 4-4 B/80 VIS 8X45 5732 4.6 ZN SUPPORT ENTRAINEMENT BOITE 8,1X14X25,2 INOX RONDELLE 10,5X30 ENGRENAGE TENDEUR DE CHAINE RONDELLE 10,5X21 ECROU M8 CARTER DRT ARRET AXE EN TOLE RONDELLE ENTRETOISE EP. ENGRAI VIS M 8X16 RONDELLE EMBOUTIE ECROU 8 UNI 5448 5.8 ZN ROULEMENT AL+SAGE CARR+ SUPPORT PALIER ECROU AUTOBL. M8X1,25 980-V SUPPORT ROUE 7.50 FIXATION SUPPORT ROUET DECALCOMANIE TRONCON CHAINE ISO 10B-1 86 MA COUVERTURE 7.50-16 IM110 8PR T FIXATION SUPPORT ROUET JANTE 7.50-16 PV TU ENGRENAGE Z-10 FER PIGNON Z-15 ZN PIGNON Z-16 ZN. PIGNON Z-23 ZN. ENGRENAGE Z-23 ROUE LIBRE PIGNON Z-25 ZN. PIGNON Z-30 ZN. AXE RESERVOIR COTE ENTRAINEMEN BRIDE 150 MM VIS M14X 2X220 U5737 8.8 ZG ECROU M14X2 FICHE A DETENTE D. 4-4 B/80 PROTECTION SOUPAPE R5.00 PROTECTION SOUPAPE R6.50 VIS M8 X25 5739 8.8 ZN ECROU AUTOBL. M8X1,25 AXE BOITE DE VITESSE 4 RA AXE 4 RANGEES L. 800

GEHZUSE LI SCHRAUBE 10X25 5739 8.G ZN SCHRAUBE 10X40 5739 8.G ZN ANSCHLAG 100X70-3 4F 0 MUTTER M10 HALTERUNG FY 25 TF 0 SCHRAUBE 18X55 MB 5740 8.G ZN ACHSE 4 REIHEN 85-6 REIH. 50 ERDSCHABER RAD 7,50X16 SCHEIBE 10,5X30 SCHRAUBBOLZENMUTTER M12X1.5 EINRASTSTIFT D 4-4 B/80 SCHRAUBE 8X45 5732 4.6 ZN RADANTRIEB-HALTERUNG B_CHSE 8,1X14X25,2 INOX SCHEIBE 10,5X30 KETTENSPANNER ZAHNRAD SCHEIBE 10,5X21 MUTTER M8 GEHZUSE RE FESTSTELLVORRICHTUNG BLECHACHS ABSTANDSCHEIBE DsNGERSTREUER SCHRAUBE M 8X16 TRICHTERSCHEIBE MUTTER 8 UNI 5448 5.8 ZN VIERKANTLAGER LAGERBsCHSE SELBSTSP.MUTT. M8X1,25 980-V RADLAGER 7.50 KUPPLUNG HALT. KL. RAD ABZIEHBILDER KETTENLZNGE ISO 10B-1 186 GLIE MANTEL 7.50-16 IM110 8PR TU KUPPLUNG HALT. KL. RAD REIFEN 7.50-16 PV TU ZAHNRAD Z-10 EISEN RITZE Z-15 ZN RITZE Z-16 ZN. RITZE Z-23 ZN. ZAHNRAD FREILAUF Z-23 RITZE Z-25 ZN. RITZE Z-30 ZN. ACHSE BEHZLTER ANTRIEBSS. 6F.L ANSCHLAG SCHRAUBE M14X 2X220 U5737 8. MUTTER M14X2 EINRASTSTIFT D 4-4 B/80 VENTILSCHUTZ R5.00 VENTILSCHUTZ R6.50 SCHRAUBE M8 X25 5739 8.8 ZN SELBSTSP.MUTT. M8X1,25 GETRIEBEACHSE 4 R. 80-6 R.45 L ACHSE 4 REIHEN B. 800

CARTER IZQ TORNILLO 10X25 5739 8.G ZN TORNILLO 10X40 5739 8.G ZN ELEMENTO DE EMPALME 100X70-3 4 0 DADO M10 SOPORTE FY 25 TF 0 TORNILLO 18X55 MB 5740 8.G ZN EJE 4 FILAS. 85-6 FILAS. 50 L. RASCADOR TIERRA RUEDA 7,50X16 ARANDELA 10,5X30 TUERCA 12X1.5 COLUMNA CLAVIJA DE MUELLE D.4-4 B/80 TORNILLO 8X45 5732 4.6 ZN SOPORTE TRANSMIS. CASQUILLO 8,1X14X25,2 INOX ARANDELA 10,5X30 ENGRANAJE TENSOR DE LA CADENA ARANDELA 10,5X21 DADO M8 CARTER DER BLOQUEO EJE DE CHAPA ARANDELA DISTAN.ABONAD. TORNILLO M 8X16 ARANDELA DE MUESCA TUERCA 8 UNI 5448 5.8 ZN COJINETE ORIFICIO CUADRADO SOPORTE COJINETE DADO AUTOBL. M8X1,25 980-V SOPORTE RUEDA 7.50 CONEXIN SOP. RUEDECILLA CALCOMANIAS TRECHO CADENA ISO 10B-1 86 ESL CUBIERTA 7.50-16 IM110 8PR TU CONEXIN SOP. RUEDECILLA LLANTA 7.50-16 PV TU ENGRANAJE Z-10 HIERRO PINION Z-15 ZN PINION Z-16 ZN. PINION Z-23 ZN. ENGRANAJE R.LIBRE Z-23 PINION Z-25 ZN. PINION Z-30 ZN. EJE DEPS. LADO TRANS. 6 FILA A ELEMENTO DE EMPALME TORNIL. M14X 2X220 U5737 8.8 DADO M14X2 CLAVIJA DE MUELLE D.4-4 B/80 PROTECIËN V+LVULA R5.00 PROTECIËN V+LVULA R6.50 TORNILLO M8 X25 5739 8.8 ZN DADO AUTOBL. M8X1,25 EJE CAMBIO 4 FILAS. 80-6 FILAS EJE 4 FILAS L.800

cod. G19530265

TAV. 134 46 47 - M14x220 59 - M14x160

6 30 29

7.50-16 - 31 6.50/80-15 - 65 5.00-15 - 73

66 - 6.50/80-15 (SX) 67 - 6.50/80-15 (DX)

36 - 7.50-16 32 - 5.00-15 - 6.50/80-15

7.50-16 - 70 5.00-15 - 6.50/80-15 - 1

58 - 7.50-16 16 - 5.00-15 - 6.50/80-15 25

3 24 23

15 8

7.50-16 - 72 5.00-15 - 6.50/80-15 - 4

7 6

17 18 19 20

45 - L. 1800 54 - L. 1000 55 - L. 800 10 - L. 1260

A 33

9 7.50-16 - 5 6.50/80-15 - 56 5.00-15 - 74

7.50-16 - 71 5.00-15 - 6.50/80-15 - 34

7.50-16 - 11 6.50/80-15 - 62 5.00-15 - 75

68 - 7.50-16 22 - 5.00-15 - 6.50/80-15

14 13 Ingranaggi trasmissione seminatori

< 2004 35 - 7.50-16 61 - 6.50/80-15 76 - 5.00-15

53 63 - 6.50/80-15 77 - 5.00-15

7.50-16 (DX) - 58 6.50/80-15 (DX) - 60 6.50/80-15 (SX) - 69 5.00-15 (DX) - 79 5.00-15 (SX) - 80

37 - 7.50-16 64 - 6.50/80-15 78 - 5.00-15

50 52

Ruote - Wheels - 5.00-15 - 5.00-12 - 6.00-16

Ruote - Wheels - 6.50/80-15 - 7.50-16 - 20x8.00-10 (*) - 26x12.00-12 (*) - 10.0x8/80-12 (*) - 10.0/75-15.3 (*) - 13.0/65-18 (*) (*) a saldare - by welding

A B

Z16

Z23

Z16

Z23

A B

Z16

Z23 r.l.

Z23

Z23 r.l.

Z16

Z23 r.l.

Ingranaggi trasmissione spandiconcime e microgranulatore

A B

Z10

Z15

Z30

Z25

cod. G19530265

TAV. 134

RUOTE DI TRASMISSIONE Pos.

Cod.

56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80

G22270281 G16630710 G15231421 F01020225 F06120116 F06120180 G15430660 F06120135 F06120207 G16630300 G22500079 G22500078 G15231301 F06120115 G15231321 F06080245 G22270284 G16630290 G22270280 G15430090 F06120170 F06120134 F06120206 F06120113 F06120114

Descrizione

Description

Benennung

Descripcion

ASSE RUOTA TRASM.MAGG. SP/S TENDICATENA CON VITE SUPPORTO TRASMISSIONE R.7.5-16 VITE M14X 2X160 U5737 8.8 BR RUOTA 6.50/80-15 COMPL. COPERTURA 6.5/80-15 IM 110 6PR RASCHIATERRA MAGGIORATO SP 530 CAMERA 15 T 340 CERCHIO 5J 15 H2 PV RAL 9001 SUPPORTO RUOTA 6,50/80-15 ASSE RUOTA MAGG.SX ASSE RUOTA MAGG.DX CARTER DX 7.50 RUOTA GOMMATA LARGA SX COMPL. CARTER SX 7.50 CATENA 5/8 ISO 10B 94 MAGLIE ATTACCO RASCHIATERRA SP/S SUPPORTO RUOTA 5,00-15 ASSE RUOTA TRASM.NORMALE SP/S RASCHIATERRA COPERTURA 5.00-15 IM 110 6PR CAMERA 15 L 290 CERCHIO 3.00 D 15 PV RAL 9001 RUOTA COMPL.5.00-15 6PR DX RUOTA COMPL.5.00-15 6PR SX

INCREASED DRIVE WHEEL AXLE CHAIN TENSIONER WITH SCREW TRANSMSUPPORT 7,50X16 BOLT M 14 X160 5737 8.G UPRIGHT- WIDE RUBBERED WHEEL COVERING 6.5/80-15 IM 110 2PR INCREASED SOIL-SCRAPER SP 530 CHAMBER 15 T 340 RING 5J 15 H2 PV RAL 9001 WHEEL SUPPORT 6,50/80-15 WHEEL AXLE- INCREASED LEFT WHEEL AXLE- INCREASED RIGHT 0 UPRIGHT- WIDE RUBBERED WHEEL 0 ISO 10B-1 CHAIN LINK - 5/8 94SOIL SCRAPER COUPLING SP/S WHEEL SUPPORT 5,00-15 NORMAL DRIVE WHEEL AXLE SOIL SCRAPER COVERING 500-15 IM110 4PR CHAMBER 15 L.290 RING 3.00 D 15 PV RAL 9001 COMPL. WHEEL 5.00-15 6PR RH. COMPL. WHEEL 20X8.00-10 LH.

AXE ROUE ENTRAINEMENT 6.50-15 0 SUPPORT ENTRAINEMENT 7,50X16 VIS M 14 X160 5737 8.G MONT. ROUE CAOUTCHOUT. LARG. COUVERTURE 6.5/80-15 IM110 4PR RACLEUR MAJOR. SP 530 CHAMBRE 15 T 340 JANTE 5J 15 H2 PV RAL 9001 SUPPORT ROUE 6,50/80-15 AXE ROUE MAJOR. GCH. AXE ROUE MAJOR. DRT. 0 MONT. ROUE CAOUTCHOUT. LARG. 0 CHAINE ISO 10B-1 5/8 94 MAI FIXATION RACLEUR SP/S SUPPORT ROUE 5,00-15 AXE ROUE ENTRAINEMENT 5.00-15 RACLEUR COUVERTURE 500-15 IM110 4PR CHAMBRE 15 L 290 JANTE 3.00 D 15 PV RAL 9001 ROUE COMPL. 5.00-15 6PR DRT. ROUE COMPL. 20X8.00-10 GCH.

RADACHSE sBERBEM. ANTRIEB SP/S 0 HALTERUNG GETRIEBE 7,50X16 SCHRAUBE M 14 X160 5737 8.G STZNDER BREITES GUMMIRAD MANTEL .5/80-15 IM 110 2PR sBERGROSSER ERDSCHABER SP 530 KAMMER 15 T 340 REIFEN 5J 15 H2 PV RAL 9001 RADLAGER 6,50/80-15 ACHSE sBERBEM. RAD LINKS ACHSE sBERBEM. RAD RECHTS 0 STZNDER BREITES GUMMIRAD 0 KETTENRING ISO 10B-1 5/8 94 GL KUPPLUNG ERDABSCHABER SP/S RADLAGER 5,00-15 RADACHSE NORMALER ANTRIEB SP/S ERDSCHABER MANTEL 500-15 IM110 4PR KAMMER 15 L 290 REIFEN 3.00 D 15 PV RAL 9001 RAD KOMPL.5.00-15 6PR RE RAD KOMPL.20X8.00-10 LI

EJE RUEDA TRANS. SOBREDIMENS. 0 SOPORTE TRANSMISIN 7,50X16 TORNILLO M 14 X160 5737 8.G MONT.RUEDA DE GOMADA LARGA CUBIERTA 6.5/80-15 IM 110 2PR RASCADOR TIERRA OBREDIMENS. SP CAMARA 15 T 340 LLANTA 5J 15 H2 PV RAL 9001 SOPORTE RUEDA 6,50/80-15 EJE RUEDA SOBREDIMENS. IZQ. EJE RUEDA SOBREDIMENS. DER. 0 MONT.RUEDA DE CAUCHO ANCHA 0 ESL. CADENA ISO 10B-1 5/8 94 E CONEXIN RASPADOR SP/S O SOPORTE RUEDA 5,00-15 EJE RUEDA TRANS. NORMAL SP/S RASCADOR TIERRA CUBIERTA 500-15 IM110 4PR CAMARA 15 L 290 LLANTA 3.00 D 15 PV RAL 9001 RUEDA COMPL.5.00-15 6PR DER. RUEDA COMPL.20X8.00-10 IZQ.

cod. G19530265

TAV. 361 19

3 14

7.50-16

11 8

15 16

9 27 13

8 26

5.00-15 / 6.50/80-15

23 26

8 24

12 10 11 8

26 25 8

3 17 20

15 8

14 12 7

1 11 9 10

4 9

12 11 6

cod. G19530265

TAV. 361

SCALETTA RUOTE PORTANTI Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

G15171840 G15312290 G07000379 G16013510 G16013500 G15211540 G15171791 F01020440 F01020445 F01020450 F01420049 G18801580 F01200244 F01030495 F01260043 G15171750 G15171781 G15171800 G15171760 G15171770 F05150112 F01020432 F01220022 F01020449 G20980050 F01420048 F01230034

Descrizione

Description

Benennung

Descripcion

SUPPORTO SCALETTA R.5/6,5 GRADINO TERMINALE PEDANA ZN SUPPORTO SX PEDANA SUPPORTO DX PEDANA SUPPORTO SX SCALETTA FERMO SCALETTA ZN VITE 8 X25 5739 8.G ZN VITE 8 X30 5739 8.G ZN VITE M 8X1,25X40 U5739 8.8 ZG ROS.M8 8,4X 32X 2 U6593 ZG BOCCOLA 8,5 X15 X10 ZN DADO M 8X1,25 U5588 6.8 ZG VITE TTCN 90' M8X16 ZN-DADO DADO FLANG.M8 D6923 8.8 ZG SUPPORTO PEDANA FIANCO SUPPORTO PEDANE APPOGGIO DI RINFORZO PEDANA 250X720X60 SP2 ZN PEDANA 250X300X60 SP2 ZN MANIGLIA GAMM MS 117 FIL.8 MM. VITE 8 X16 5739 8.G ZN DADO M 8X1,25 D980 8 ZG VITE 8 X35 5739 8.G ZN BOCCOLA 15X7X8,5 ZN ROND.PIANA 9X 24X2 6593 ZN DADO M 8X1,25 D982 8

STEP LADDER SUPPORT R.5/6,5 STEP GALVANIZED PLATFORM END LH FOOTPLATE SUPPORT RH FOOTPLATE SUPPORT LEFT SUPPORT RAMP STOP BOLT M8 X25 5739 8.8 ZN BOLT M 8X30 BOLT M 8X40 WASHER M8 8,4X32X2 U6593 ZG BUSH 8.5 X15 X10 NUT M8 TTCN 90' BOLT M8X16 GALVANIZED FLANGE NUT M8 DIN 6923 8.8 GAL FOOTBOARD SUPPORT PLATFORM SUPPORT REINFORCEMENT REST PLATFORM 250X720X60 SP2 ZN

SUPPORT ECHELLE R.5/6,5 MARCHE PIECE TERMINALE MARCHEPIED ZN SUPPORT GCH.MARCHEPIED SUPPORT DRT. MARCHEPIED SUPPORT GCH BUTEE PETITE ECHELLE VIS M8 X25 5739 8.8 ZN VIS M 8X30 VIS M 8X40 RONDELLE M8 8,4X32X2 U6593 ZG DOUILLE 8,5 X15 X10 ECROU M8 VIS TTCN 90' M8X16 ZN ECROU BRIDE .M8 DIN 6923 8.8 Z SUPPORT MARCHEPIED SUPPORT MARCHEPIED REPOSE DE RENFORCEMENT MARCHEPIED 250X720X60 SP2 ZN

STUFENHALTERUNG R.5/6,5 STUFE LAUFSTEGABSCHLUSS ZN TRITTBRETTHALTERUNG LI RE TRITTBRETTHALTERUNG HALTERUNG LI LEITERSPERRE SCHRAUBE M8 X25 5739 8.8 ZN SCHRAUBE M 8X30 SCHRAUBE M 8X40 SCHEIBE M8 8,4X32X2 U6593 ZG BUCHSE 8,5 X15 X10 MUTTER M8 SCHRAUBE TTCN 90' M8X16 ZN GEFLANSCHTE MUTTER M8 DIN6923 TRITTBRETTHALTERUNG LAUFSTEGHALTERUNG VERSTZRKUNGSAUFLAGE TRITTBRETT 250X720X60 SP2 ZN

SOPORTE ESCALERILLA R.5/6,5 ESCALN T TERMINAL PLATAFORMA ZN SOPORTE IZQ. PLATAFORMA SOPORTE DER. PLATAFORMA SOPORTE IZQ BLOQUEO ESCALERA TORNILLO M8 X25 5739 8.8 ZN TORNILLO M 8X30 TORNILLO M 8X40 ARANDELA M8 8,4X32X2 U6593 ZG MANGUITO 8,5 X15 X10 DADO M8 TORNILLO TTCN 90' M8x16 ZN TUERCA BRIDA M8 DIN 6923 8.8 Z SOPORTE PLATAFORMA SOPORTE PLATAFORMAS COMPLETO APOYADOR DE REFUERZO PLATAFORMA 250X720X60 SP2 ZN

HANDLE BOLT M 8X16 SELF LOCKING NUT M8X1,25 980V BOLT M 8X35 BUSHING 15X7X8-5 ZN PLANE WASHER D.8 SELF LOCKING NUT M8X1,25

POIGNEE VIS M 8X16 ECROU AUTOBL. M8X1,25 980-V VIS M 8X35 BOITE 15X7X8-5 ZN RONDELLE D.8 ECROU AUTOBL. M8X1,25

HANDGRIFF SCHRAUBE M 8X16 SELBSTSP.MUTT. M8X1,25 980-V SCHRAUBE M 8X35 BsCHSE 15X7X8-5 ZN SCHEIBE D.8 SELBSTSP.MUTT. M8X1,25

MANILLA TORNILLO M 8X16 DADO AUTOBL. M8X1,25 980-V TORNILLO M 8X35 CASQUILLO 15X7X8-5 ZN ARANDELA D.8 DADO AUTOBL. M8X1,25

cod. G19530265

TAV. 342 12

6.50/80-15

5.00-15 / 6.50/80-15 / 7.50/16-16

23 - M8x100 25 - M8x150

15 4 14 15

17 3 6

6.50/80-15 - 24 7.50-16 - 26

23 - M8x100 25 - M8x150

21 19 18

cod. G19530265

TAV. 342

KIT RUOTE PER TERRENI SASSOSI - FLANGIATURA RUOTE Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

G16630150 G16630170 G16630220 F01060077 G16630160 G16630140 F01220033 G20980076 G16630190 G18800320 F01060079 G16630110 F06080238 F01220022 F01420048 G16630210 G22270281 G16630200 G56244018 F06120193 F06120179 F01250040 F01020090 G14830221 F01020097 G15231910

Descrizione

Description

Benennung

Descripcion

CARTER SX RASCHIATERRA RUOTA SASSI RUOTA SASSI COMPLETA BUL.M10X 1,5X 45 U5732 4.8 ZG SUPP.RASCHIATERRA SASSI CARTER DX. DADO M10X 1,5 D980 8 ZG BOCCOLA 16X7X10,25 INGRANAGGIO Z.10-TENDIC.COMPL BOCCOLA 10,25X18X13 BUL.M10X 1,5X 50 U5732 4.6 BR SUPPORTO RUOTA SASSI CATENA 5/8 ISO 10B 78 MAGLIE DADO M 8X1,25 D980 8 ZG ROND.PIANA 9X 24X2 6593 ZN DISCO PROTEZIONE SASSI ASSE RUOTA TRASM.MAGG. SP/S RUOTA 6,50/80-12 TS-06 6PR CAMERA D'ARIA FR 12 6,50/80-12 CERCHIO 300 B X 12 COPERTURA 6.5/80-12 TS-06 6PR DADO COLON. 12X1.5 ZN VITE M8X1,25X100 U5737 8.8 ZG DISCO PROTEZIONE SASSI VITE M8X1,25X150 U5737 8.8 ZG DISCO PROTEZIONE SASSI R7.50

LEFT CASE SOIL SCRAPER WHEEL WHEEL- STONES ASSY.. BOLT 10X45 5732 4.8 GALVANIZED MUD SCRAPER SUPPORT RH CASING SELF LOCKING NUT M10X1,5 980-V BUSHING 16X7X10-25 GEAR Z-10 - BELT TIGHTENER BUSHING 10,50X18X31 SCREW 10X50 5732 4.6 WHEEL SUPPORT ISO 10B-1 CHAIN LINK - 78-LINK SELF LOCKING NUT M8X1,25 980V PLANE WASHER D.8 DISK STONE PROTECTION INCREASED DRIVE WHEEL AXLE WHEEL 6,50/80-12 TS-06 4PR CHAMBER 12 6,50/80-12 RING 300 B X 12 COVERING 6.5/80-12 TS-06 4PR COLUMN NUT M12X1.5 STUD BOLT BOLT 8 X100 5737 8.G GALVANIZ. DISK STONE PROTECTION BOLT 8 X150 5737 8.G GALVANIZ.

CARTER GAUCHE RACLEUR ROUE ROUE SOLS GRAVELEUX COMPL. VIS 10X45 5732 4.8 ZN SUPP. RACLE-BOUE CARTER DRT. ECROU AUTOBL. M10X1,5 980-V BOITE 16X7X10-25 ENGRENAGE Z-10 - TENDEUR DE CO BOITE 10,50X18X31 VIS 10X50 5732 4.6 SUPPORT ROUE MAILLE CHAINE ISO 10B-1 78 MAI ECROU AUTOBL. M8X1,25 980-V RONDELLE D.8 DISQUE PROTECTION SOLS GRAVELE AXE ROUE ENTRAINEMENT 6.50-15 ROUE 6,50/80-12 TS-06 4PR CHAMBRE 12 6,50/80-12 JANTE 300 B X 12 COUVERTURE 6.5/80-12 TS-06 4PR ECROU M12X1. 5 COLONNE VIS 8 X100 5737 8.G ZN DISQUE PROTECTION SOLS GRAVELE VIS 8 X150 5737 8.G ZN

GEHZUSE LI RADSCHABER RAD RAD SASSI KOMPLETT SCHRAUBE 10X45 5732 4.8 ZN SCHLAMMSCHABERHAL-TERUNG GEHZUSE RECHTS SELBSTSP.MUTT. M10X1,5 980-V BsCHSE 16X7X10-25 ZAHNRAD Z-10 - RIEMENSPANNER B_CHSE 10,50X18X31 SCHRAUBE 10X50 5732 4.6 RADLAGER KETTENRING ISO 10B-1 78 GLIEDE SELBSTSP.MUTT. M8X1,25 980-V SCHEIBE D.8 STEINSCHUTZ-SCHEIBE RADACHSE sBERBEM. ANTRIEB SP/S RAD 6,50/80-12 TS-06 4PR KAMMER 12 6,50/80-12 REIFEN 300 B X 12 MANTEL 6.5/80-12 TS-06 4PR SCHRAUBBOLZENMUTTER M12X1.5 SCHRAUBE 8 X100 5737 8.G ZN STEINSCHUTZ-SCHEIBE SCHRAUBE 8 X150 5737 8.G ZN

C-RTER IZQ RUEDAS RASCADOR DE TIERRA RUEDA PIEDRAS COMPLETA TORNILLO 10X45 5732 4.8 ZN SOPORTE RASCADOR DE LODO C-RTER DER DADO AUTOBL. M10X1,5 980-V CASQUILLO 16X7X10-25 ENGRANAJE Z-10 - TENSOR DE COR CASQUILLO 10,50X18X31 TORNILLO 10X50 5732 4.6 SOPORTE RUEDA ESLABN CADENA ISO 10B-1 78 ESL DADO AUTOBL. M8X1,25 980-V ARANDELA D.8 DISCO PROTECIËN PIEDRAS EJE RUEDA TRANS. SOBREDIMENS. RUEDA 6,50/80-12 TS-06 4PR CAMARA 12 6,50/80-12 LLANTA 300 B X 12 CUBIERTA 6.5/80-12 TS-06 4PR TUERCA 12X1.5 COLUMNA TORNILLO 8 X100 5737 8.G ZN DISCO PROTECIËN PIEDRAS TORNILLO 8 X150 5737 8.G ZN

cod. G19530265

TAV. 241

3 - M14x180 17 - M14x200

11 12 5 9

10 13 7

8 14

1 - telaio 100x150 15 - telaio 120x120 16 - telaio 150x150 2

cod. G19530265

TAV. 241

PRESA DI POTENZA POSTERIORE Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

G13710560 F01200306 F01020229 F01410088 G14850040 G14850050 F01020514 G14850030 F01220048 F01410076 F02100121 F02100161 F04100139 G66248227 G14255000 G15110091 F01020232

Descrizione

Description

Benennung

Descripcion

SCONTRO Q 100 DADO 14 5588 6.8 ZN VITE M14X 2X180 U5737 8.8 BR ROS.M14 15X 28X2,5 U6592 ZG SUPPORTO PDP POST. T.100 SUPPORTO PRESA DI POTENZA VITE 12X40 5739 8.G ZN PRESA DI POTENZA POSTERIORE DADO M12X1,75 D980 8 ZG ROS.M12 13X 24X2,5 U6592 ZG SPINA E.P. 6X 40 U6873 C70 BR SPINA E.P. 10X 40 U6873 C70 BR SUPPORTO FY TB35 TF CUFFIA PROTEZIONE P.D.P. SCONTRO 120 SCONTRO A U VITE M14X 2X200 U5737 8.8 ZG

STRIKER PLATE 'U' 100 NUT M14X2 SCREW 14X180 5737 8.G PLANE WASHER D14 UNI 6592 ZN PDP REAR SUPPORT T.100 PTO SUPPORT BOLT M12X1,75X40 REAR POWER TAKE-OFF SELF LOCKING NUT M12X1,75 980V PLANE WASHER D12 UNI 6592 ZN ELASTIC PIN 6X40 PIN EL. 10 X40 DIN 1481 SUPPORT FY TB35 TF POWER TAKE-OFF PROTECTION HOUS STRIKER 120 STRIKER BOLT 14X200 5737 8.G GALVANIZ.

BUTEE 'U' 100 ECROU M14X2 VIS 14X180 5737 8.G RONDELLE D14 UNI 6592 ZN SUPPORT ARRIERE PDP T.100 SUPPORT PRISE DE FORCE VIS M12X1,75X40 PRISE DE FORCE ARRI+RE ECROU AUTOBL. M12X1,75 980-V RONDELLE D12 UNI 6592 ZN GOUJON ELASTIQUE 6X40 FICHE EL. 10 X40 DIN 1481 SUPPORT FY TB35 TF PROTECTEUR PRISE DE PUISSANCE BUTEE 120 BRIDE 150 MM VIS 14X200 5737 8.G ZN

ANSCHLAG 'U' 100 MUTTER M14X2 SCHRAUBE 14X180 5737 8.G SCHEIBE D14 UNI 6592 ZN HINT. HALTERUNG PDP T.100 ZAPFWELLENHALTERUNG SCHRAUBE M12X1,75X40 HINTERE LEISTUNGSABNAHME SIEHE 00553312 SCHEIBE D12 UNI 6592 ZN SPANNHUELSE 6X40 SPANNSTIFT 10X40 DIN 1481 HALTERUNG FY TP35 TF SCHUTZKASTEN KRAFTABTRIEB ANSCHLAG 120 ANSCHLAG SCHRAUBE 14X200 5737 8.G ZN

ELEMENTO DE EMPALME 'U' 100 DADO M14X2 TORNILLO 14X180 5737 8.G ARANDELA D14 UNI 6592 ZN SOPORTE TRASERO TDP T.100 SOPORTE TOMA DE FUERZA TORNILLO M12X1,75X40 TOMA DE FUERZA TRASERA DADO AUTOBL. M12X1,75 980-V ARANDELA D12 UNI 6592 ZN PASADOR 6X40 CLAVIJA EL.10 X40 DIN 1481 SOPORTE FY TB35 TF ENVOLTURA PROTECCIN T. DE P. G ELEM. DE EMPALME 120 ELEMENTO DE EMPALME TORNILLO 14X200 5737 8.G ZN

cod. G19530265

TAV. 142 3

16 1 serb. 1100 - 22 serb. 850 - 23

10 2 9

14 15

13 20

8 21 17 23 4

15 7

5 8

11 16 12 - M14x160 19 - M14x220

11 12 - M14x160 19 - M14x220

cod. G19530265

TAV. 142

SUPPORTI SERBATOI SPANDICONCIME MTE Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

G15470631 G15470641 G15171380 G15171390 G15472901 G15473251 G18701140 F20110706 F20110770 G20970142 G18700690 F01020225 F01020463 F01020465 F01200271 F01200306 F01200271 F01420059 F01020235 G15475560 G15472970 G15272961 G15273180

Descrizione

Description

Benennung

Descripcion

SUPPORTO SPANDI CENTRALE DX SUPPORTO SPANDI CENTRALE SX SUPPORTO ESTERNO SPANDI DX SUPPORTO ESTERNO SPANDI SX SUPPORTO SPANDI Q.150 SUPPORTO ANT.SPANDI RONDELLA 11 X35 X5 CAV.Q.M10X 1,5X 30 47X 60 ZG CAVALLOTTO M14X96-119 ZN RONDELLA 32X4X15,5 RONDELLA 15 X40 X6 ZN VITE M14X 2X160 U5737 8.8 BR VITE M10X1,5 X25 U5739 A2 IX VITE M10X1,5 X35 U5739 A2 IX DADO M10X 1,5 U5588 A2 IX DADO 14 5588 6.8 ZN DADO M10X 1,5 U5588 A2 IX ROS.M10 10,5X 30X2,5 U6593 IX VITE M14X 2X220 U5737 8.8 ZG TAPPO TUBO 35X35 TUBO Q. 35X 4X1200 RINFORZO SPANDICONCIME 1100 RINFORZO SPANDICONCIME 850

RH CENTRAL FERT.SPREADER SUPP. LH CENTRAL FERT.SPREADER SUPP. MAN.SPR. EXT. RIGHT SUPPORT MAN.SPR.EXT.LEFT SUPPORT SQ. FERTILIZER SPREADER SUPPOR FRONT FERTILIZER SPREADER SUPP WASHER 11 X 35 X 5 DISK SUPPORT.ELEMENT U BOLT SV U-BOLT M14X96 - 119 ZN WASHER 32X4X15-5 WASHER 15 X 40 X 6 ZN BOLT M 14 X160 5737 8.G SCREW 10X25 5739 INOX A2 SCREW 10X35 5739 INOX A2 NUT 10 5588 6.8 INOX NUT M14X2 NUT 10 5588 6.8 INOX WASHER 11X30X2,5 6593 A2 BOLT M14X 2X220 U5737 8.8 ZG PLUG PIPE 35X35 SQUARE PIPE 35 X4 X1200 FERTILIZER 1100 REINFORCEMENT FERTILIZER 850 REINFORCEMENT

SUPPORT EPANDEUR CENTR.DRT. SUPPORT EPANDEUR CENTR.GCH. SUPPORT EXT. DRT. EP. ENGRAIS SUPPORT EXT. GCH. EP. ENGRAIS SUPPORT +PANDEUR CARR+ 150 SUPPORT AVANT +PANDEUR RONDELLE 11 X35 X5 CAVALIER SUPPORT DISQUE SV CAVALIER M14X96 - 119 ZN RONDELLE 32X4X15-5 RONDELLE 15 X40 X6 ZN VIS M 14 X160 5737 8.G VIS 10X25 5739 INOX A2 VIS 10X35 5739 INOX A2 ECROU 10 5588 6.8 INOX ECROU M14X2 ECROU 10 5588 6.8 INOX RONDELLE 11X30X2,5 6593 A2 VIS M14X 2X220 U5737 8.8 ZG BOUCHON TUBE 35X35 TUBE CARRE 35 X4 X1200 RENFORT EPANDEUR D'ENGRAIS 110 RENFORT EPANDEUR D'ENGRAIS 850

HALTER. MITTL.DsNGERSTR. RE HALTER. MITTL.DsNGERSTR. LI RECHTE ZUSSERE HALTER.DsNGERST LINKER ZUSSERE HALTER.DsNGERST HALTERUNG SPANDI Q.150 VORD.HALTERUNG SPANDI UNTERLEGSCHEIBE 11 X35 X5 VERBINDUNG SCHEIBENHALTERUNG S VERBINDUNG M14X96 - 119 ZN UNTERLEGSCHEIBE 32X4X15-5 UNTERLEGSCHEIBE 15 X40 X6 ZN SCHRAUBE M 14 X160 5737 8.G SCHRAUBE 10X25 5739 INOX A2 SCHRAUBE 10X35 5739 INOX A2 MUTTER 10 5588 6.8 INOX MUTTER M14X2 MUTTER 10 5588 6.8 INOX UNTERLEGSCHEIBE 11X30X2,5 6593 SCHRAUBE M14X 2X220 U5737 8. ROHRPFROPFEN 35X35 VIERKANTROHR 35 X4 X1200 VERSTZRKUNG DsNGERSTREUER 1100 VERSTZRKUNG DsNGERSTREUER 850

SOPORTE ABONAD. CENTRAL DER. SOPORTE ABONAD. CENTRAL IZQ. SOPORTE EXT.DER. ABONADORA . SOPORTE EXTERIOR IZQ.ABONADORA SOPORTE ABONADORA Q.150 SOPORTE ANT.ABONADORA ARANDELA 11 X35 X5 PERNO EN U SOP. DISCO SV PERNO EN U M14X96 - 119 ZN ARANDELA 32X4X15-5 ARANDELA 15 X40 X6 ZN TORNILLO M 14 X160 5737 8.G TORNILLO 10X25 5739 INOX A2 TORNILLO 10X35 5739 INOX A2 TUERCA 10 5588 6.8 INOX DADO M14X2 TUERCA 10 5588 6.8 INOX ARANDELA 11X30X2,5 6593 A2 TORNIL. M14X 2X220 U5737 8.8 TAP N TUBO 35X35 TUBO CUADRADO 35 X4 X1200 REFUERZO ABONADORA 1100 REFUERZO ABONADORA 850

cod. G19530265

TAV. 152

12 14 15

8 1 11

13 17

12 21

18 2 14 14 15

14 3

14 10

serb. 1100 - 19 serb. 850 - 20

9 14 12

cod. G19530265

TAV. 152

SUPPORTI SERBATOI SPANDICONCIME MTE300 Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

G15171380 G15171390 G15272791 G15272781 G15171600 G15171610 G18701140 G20980016 G15472970 F20110706 F01020432 F01020472 F01200244 F01200270 F01420060 G65336133 G65336134 G15475560 G15272961 G15273180 G15272800

Descrizione

Description

Benennung

Descripcion

SUPPORTO ESTERNO SPANDI DX SUPPORTO ESTERNO SPANDI SX SUPPORTO DX SUPPORTO SX SUPPORTO GUIDATUBO DX SUPPORTO GUIDATUBO SX RONDELLA 11 X35 X5 BOCCOLA 9,5X12,25X18 TUBO Q. 35X 4X1200 CAV.Q.M10X 1,5X 30 47X 60 ZG VITE 8 X16 5739 8.G ZN VITE M10X 1,5X25 U5739 8.8 ZG DADO M 8X1,25 U5588 6.8 ZG DADO 10 5588 6.8 ZN ROS.M10 10,5X 30X2,5 U6593 ZG MOLLA GUIDATUBI MOLLA GUIDATUBI SX TAPPO TUBO 35X35 RINFORZO SPANDICONCIME 1100 RINFORZO SPANDICONCIME 850 PIATTO 60X 6X 900

MAN.SPR. EXT. RIGHT SUPPORT MAN.SPR.EXT.LEFT SUPPORT RIGHT SUPPORT LEFT SUPPORT RIGHT PIPE GUIDE SUPPORT LEFT PIPE GUIDE SUPPORT WASHER 11 X 35 X 5 BUSHING 9-5X12-25X18 SQUARE PIPE 35 X4 X1200 DISK SUPPORT.ELEMENT U BOLT SV BOLT M 8X16 BOLT 10X25 5739 8.G GALVANIZED NUT M8 NUT M10 WASHER 10,5X30 TUBE GUIDE SPRING LH TUBE GUIDE SPRING PLUG PIPE 35X35 FERTILIZER 1100 REINFORCEMENT FERTILIZER 850 REINFORCEMENT PLATE 60X 6X 900

SUPPORT EXT. DRT. EP. ENGRAIS SUPPORT EXT. GCH. EP. ENGRAIS SUPPORT DRT SUPPORT GCH SUPPORT GUIDE-TUBE DRT. SUPPORT GUIDE-TUBE GCH. RONDELLE 11 X35 X5 BOITE 9-5X12-25X18 TUBE CARRE 35 X4 X1200 CAVALIER SUPPORT DISQUE SV VIS M 8X16 VIS 10X25 5739 8.G ZN ECROU M8 ECROU M10 RONDELLE 10,5X30 RESSORT GUIDE-TUBES F RESSORT GUDE-TUBES GCH BOUCHON TUBE 35X35 RENFORT EPANDEUR D'ENGRAIS 110 RENFORT EPANDEUR D'ENGRAIS 850 PLATEAU 60X 6X 900

RECHTE ZUSSERE HALTER.DsNGERST LINKER ZUSSERE HALTER.DsNGERST HALTERUNG RE HALTERUNG LI ROHRFsHRUNG HALTERUNG RECHTS ROHRFsHRUNG HALTERUNG LINKS UNTERLEGSCHEIBE 11 X35 X5 BsCHSE 9-5X12-25X18 VIERKANTROHR 35 X4 X1200 VERBINDUNG SCHEIBENHALTERUNG S SCHRAUBE M 8X16 SCHRAUBE 10X25 5739 8.G ZN MUTTER M8 MUTTER M10 SCHEIBE 10,5X30 EDER ROHRFsHRUNG M FEDER ROHRFsHRUNG LI ROHRPFROPFEN 35X35 VERSTZRKUNG DsNGERSTREUER 1100 VERSTZRKUNG DsNGERSTREUER 850 TELLER 60X 6X 900

SOPORTE EXT.DER. ABONADORA . SOPORTE EXTERIOR IZQ.ABONADORA SOPORTE DER SOPORTE IZQ SOPORTE GUIATUBO DER. SOPORTE GUIATUBO IZQ. ARANDELA 11 X35 X5 CASQUILLO 9-5X12-25X18 TUBO CUADRADO 35 X4 X1200 PERNO EN U SOP. DISCO SV TORNILLO M 8X16 TORNILLO 10X25 5739 8.G ZN DADO M8 DADO M10 ARANDELA 10,5X30 UELLE GUA TUBOS AR MUELLE GUA TUBOS IZQ A TAP N TUBO 35X35 REFUERZO ABONADORA 1100 REFUERZO ABONADORA 850 PLATO 60X 6X 900

cod. G19530265

TAV. 174 serb. 850 - 4 serb. 1100 - 64 38 33 50

serb. 850 - 7 serb. 1100 - 65

(*) (**)

25 6 31 36

mm 8 50 m m 1100

18 23 8

31 36

14 - L. 500 67 - L. 1180 68 - L. 1375

31 5

56 30

E D C B A

26 29

39 37 45

57 23

40 1

41 52

53 44

26 serb. 850 - 11 serb. 1100 - 66

850 2u. dx - 61 850 2u. sx - 69 850 3u. dx - 70 850 3u. sx - 71 1100 3u. dx - 72 1100 3u. sx - 73 1500 3u. dx - 74 1500 3u. sx - 75

48 19 20

13 49

32 (***) 21

55 47 24 34

2 - serb. 850 62 - serb. 1100

3 - serb. 850 63 - serb. 1100

*** Kit ingranaggi (2+2 pezzi)

60 12

cod. G19530265

TAV. 174

SERBATOI SPANDICONCIME Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55

G14830390 G20860121 G20860122 G15470580 G15471930 G15471990 G15472760 G15472770 G15472780 G19002710 G19004470 G19002850 G19002920 G20860012 G20860052 G20860086 G20860088 G20860090 G20860093 G20860106 G20860126 G19005040 G22505085 G20970097 G20970125 G22220073 G22230094 G22250287 F01020043 F01020068 F01020403 F01020432 F01020472 F01070075 F01070011 F01200232 F01200244 F01220033 F01410037 F01410051 F02100079 F02100089 F02100114 F03011081 F06080196 F03100500 G18900620 G65336055 G65336062 G65336064 G65336065 G65338043 G66248121 G66248125 G66248178

Descrizione

Description

Benennung

CUSCINETTO FORO QUADRO ASSE AGITAT.DX SERB.850 COMPL. ASSE AGITAT.SX SERB.850 COMPL. COPERCHIO SERBATOIO 850 PROTEZIONE SUPPORTO COCLEA GRIGLIA SERBATOIO PLASTICA 850 DISTR.COMPL.8PALE SPANDI PL TAPPO SPANDI PLASTICA PROTEZ.RINVIO SPANDICONCIME SERBATOIO CONCIME 850 PROTEZIONE PIGNONE CORPO DISTRIBUTORE SPANDI PLA. MANICOTTO DI UNIONE L.500 REGOLATORE APERTURA INGRANAGGIO 1/2 Z-12 F.Q. INGRANAGGIO 1/2 Z-12 F.T. ASSE SX 5F.60 L.1460 VITE DI REGOL. DOSATORE SPANDI 8 PALE COMPL. KIT INGR DISTR CONCIME (2+2) BOCCOLA ASSE SPANDI FERMO ASSE IN LAMIERA RONDELLA 32X3X4,5 RONDELLA 28X2,5X6,5 RONDELLA 28X0,3X16,5 SUPPORTO CUSCINETTO MANICOTTO DISTANZIALE SV VITE M 6X 1X 60 U5737 8.8 ZG VITE M 8X1,25X40 U5737 8.8 ZG VITE 6 X16 5739 8.G ZN VITE 8 X16 5739 8.G ZN VITE M10X 1,5X25 U5739 8.8 ZG VIT.A.4,2X1,41X 38 6954 4.8NI VIT.A.4,2X1,41X 9,5 6950 4.8NI DADO M 6X 1 U5588 6.8 ZG DADO M 8X1,25 U5588 6.8 ZG DADO M10X 1,5 D980 8 ZG ROS.M6 6,4X12,5X1,6 U6592 ZG ROS.M8 8,4X 17X1,6 U6592 ZG SPINA EL.5 X20 DIN 1481 SPINA E.P. 5X 36 U6873 C70 BR SPINA E.P. 6X 30 U6873 C70 BR GUARNIZIONI LABBRO DE100 CATENA 1/2 ISO 083 32 MAGLIE TUBO EOLO 35 PU ANELLO STRINGITUBO ASP.ZN SP MOLLA SPEC.REGOL.SPAND. SP MOLLA SPEC.SCIV.DISTR.SPAND.SP MOLLA SPEC.COCLEA DX SPAND.HL MOLLA SPEC.COCLEA SX SPAND.HL MOLLA COMP.ZN SERB. M80 BOCCOLA CON FLANGIA M80 GHIERA REGOLAZIONE M80 SCIVOLO DISTR.SPAND. SP

SQUARE-HOLED BEARING STIRRER SPINDLE- RIGHT 850 TAN STIRRER SPINDLE- LEFT 850 TANK TANK TOP 850 GUARD SCREW SUPPORT PLASTIC TANK GRID 850 COMPL.PLAS.FERTIL.DISTR.8RIBS PLASTIC FERT. SPREADER PLUG FERTILIZER TRANSM. PROTECTION FERTILIZER HOPPER 850 PINION GUARD PLA. F.SPREADER DISTRIB.CASING JOINT SLEEVE L.500 OPENING REGULATOR GEAR 1/2 Z-12 F.Q. GEAR 1/2 Z-12 F.T. AXLE- LEFT 5-R.60 L.1460 ADJUSTMENT BOLT FERT.METERING DEVICE ASS.8 GRO KIT- MAN. DISTR. GEARS FERT. SPREADER AXLE BUSH PLATE AXLE STOP WASHER 32X3X4-5 WASHER 28X2-5X6-5 WASHER 28X0-3X16-5 BEARING SUPPORT SPACER SLEEVE SV BOLT 6 X60 5737 8.G GALVANIZED BOLT 8 X40 5737 8.G GALVANIZED BOLT M 6X16 BOLT M 8X16 BOLT 10X25 5739 8.G GALVANIZED BOLT 4-2X38 DIN 7981 BOLT- SELF-TAPPING 4-2X9-5T.E. NUT 6 UNI 5588 6.8 GALVANIZED NUT M8 SELF LOCKING NUT M10X1,5 980-V PLANE WASHER D.6 PLANE WASHER D.8 PIN EL. .5 X20 DIN 1481 PIN EL. 5 X36 DIN 1481 ELASTIC PIN 6X30 LIP GASKET DE100 CUT-DOWN CHAIN .1/2 ISO 083 32 EOLO PIPE 35 PU

ROULEMENT AL+SAGE CARR+ AXE AGITATEUR DRT. RESERVOIR 8 AXE AGITATEUR GCH. RESERVOIR 8 COUVERCLE RESERVOIR 650 PROTECTION SUPPORT VIS ALIMENTATION GRILLE RESERVOIR PLASTIQUE 850 MINIMAX COMPL 8C PLA BOUCHON EPAND. PLASTIQUE PROTECTION RENVOI FERTILISEUR TR+MIE ENGRAIS 850 PROTECTION PIGNON CORPS DISTRIBUTEUR EPAND. MANCHON DE RACCORD L. 500 REGULATEUR OUVERTURE ENGRENAGE 1/2 Z-12 TROUS CARRE ENGRENAGE 1/2 Z-12 TROUS RONDS AXE GCH. 5 RANGEES 60 L. 1460 VIS DE REGLAGE ROTOR DOSEUR 8C FERTI COUPLE CON DISTR ENGRAIS (2+2) DOUILLE AXE +PANDEUR ARRET AXE EN TOLE RONDELLE 32X3X4-5 RONDELLE 28X2-5X6-5 RONDELLE 28X0-3X16-5 SUPPORT PALIER MANCHON ENTRETOISE SV VIS 6 X60 5737 8.G ZN VIS 8 X40 5737 8.G ZN VIS M 6X16 VIS M 8X16 VIS 10X25 5739 8.G ZN VIS 4-2X38 DIN 7981 VIS AUTOTAR. 4-2X9-5 T. E. COU ECROU 6 UNI 5588 6.8 ZN ECROU M8 ECROU AUTOBL. M10X1,5 980-V RONDELLE D.6 RONDELLE D.8 FICHE EL. 5 X20 DIN 1481 FICHE EL. 5 X36 DIN 1481 GOUJON ELASTIQUE 6X30 GARNITURES LEVRE DE100 TRONCON CHAINE 1/2 ISO 083 32 TUBE EOLO 35 PU

VIERKANTLAGER COJINETE ORIFICIO CUADRADO SAMENMISCHERACHSE RE BEH.850 EJE AGITAD. DER. DEPS.850 COMA SAMENMISCHERACHSE LI BEH.850 EJE AGITAD. IZQ. DEPS. 850 COA BEHZLTERDECKEL 850 TAPA DEPSITO 850 A SCHUTZ PROTECCIN P HALTERUNG SCHNECKE SOPORTE CCLEA S BEHZLTERGITTER PLAST.850 REJILLA DEPSITO PLAST.850 G KOMPL.DOSIER.PLA.DÜNGERSTR.8S DISTR.COMP.ABONO PLAST. 8AL. PLASTIKPFROPFEN DsNGERSTR. TAPN ABONADORA PLæSTICO D SCHUTZ VORGELEGE DUNGERSTREUER PROTECCION TRANSMISION ABONADO D_NGERTANK 850 DEPËSITO ABONO 850 RITZELSCHUTZ PROTECCIN PI¾N PR VERTEILUNGSKTRPER STREUER PLA. CUERPO DIST. ABONADORA PLæS. VERBINDUNGSMUFFE L.500 MANGUITO DE UNIN L.500 M TFFNUNGSEINSTELLER REGULADOR ABERTURA ZAHNRAD 1/2 Z-12 F.Q. ENGRANAJE 1/2 Z-12 F.Q. ZAHNRAD 1/2 Z-12 F.T. ENGRANAJE 1/2 Z-12 F.T. ACHSE LI 5R.F.60 L.1460 EJE IZQ. 5 FILA. 60 L.1460 EINSTELLSCHRAUBE. TORNILLO DE REGULACIN S DOSIERER DUNGER.KOMPL. 8 SEKT DOSIFICADOR ABONO COMP.8 SECT KIT ZAHNRZDER DsNGERSTREUER SET ENGRANAJES DISTRIB. ABONO ACHSENBUCHSE STREUER MANGUITO -RBOL ABONADORA FESTSTELLVORRICHTUNG BLECHACHS BLOQUEO EJE DE CHAPA UNTERLEGSCHEIBE 32X3X4-5 ARANDELA 32X3X4-5 UNTERLEGSCHEIBE 28X2-5X6-5 ARANDELA 28X2-5X6-5 UNTERLEGSCHEIBE 28X0-3X16-5 ARANDELA 28X0-3X16-5 LAGERBsCHSE SOPORTE COJINETE ABSTANDSMUFFE SV MANGUITO DISTANCIADOR SV SCHRAUBE 6 X60 5737 8.G ZN TORNILLO 6 X60 5737 8.G ZN SCHRAUBE 8 X40 5737 8.G ZN TORNILLO 8 X40 5737 8.G ZN SCHRAUBE M 6X16 TORNILLO M 6X16 SCHRAUBE M 8X16 TORNILLO M 8X16 SCHRAUBE 10X25 5739 8.G ZN TORNILLO 10X25 5739 8.G ZN SCHRAUBE 4-2X38 DIN 7981 TORNILLO 4-2X38 DIN 7981 SELBSTSCHNEID. SCHRAUBE 4-2X9TORNILLO AUTORROSC. 4-2X9-5 MUTTER 6 UNI 5588 6.8 ZN TUERCA 6 UNI 5588 6.8 ZN MUTTER M8 DADO M8 SELBSTSP.MUTT. M10X1,5 980-V DADO AUTOBL. M10X1,5 980-V SCHEIBE D.6 ARANDELA D.6 SCHEIBE D.8 ARANDELA D.8 SPANNSTIFT 5X20 DIN 1481 CLAVIJA EL.5 X20 DIN 1481 SPANNSTIFT 5 X36 DIN 1481 CLAVIJA EL.5 X36 DIN 1481 SPANNHUELSE 6X30 ESPINA ELASTICA 6X30 LIPPENDICHTUNG DE100 GUA DELANTERA G KETTENLZNGE 1/2 ISO 083 32 GL TRECHO CADENA 1/2 ISO 083 32 ROHR EOLO 35 PU TUBO EOLO 35 PU

SPEC SPRING MAN. SPR. ADJUSTM. SPEC SPRING - MAN. SPR. DISTR. SPEC. WORM SCREW SPRING RIGHT SPEC. WORM SCREW SPRING LEFT M ZN TANK COMP.SPRING M80 BUSHING W/ FLANGE M80 ADJUSTMENT KNURLED NUT M80 CHUTE- MANURE-SPREADER DISTRIB

RESSORT SPEC. REGL. EP. ENTRAI RESS. SPEC. LANCOIR DISTR. EP. RESSORT SPEC. VIS DRT. EP. ENG RESSORT SPEC. VIS GCH. EP. ENG RESSORT COMPL. ZN RESERVOIR M8 SUPPORT AVEC BRIDE M80 BAGUE REGLAGE M80 LANCOIR DISTRIBUTION EP. ENGR.

SPEZIALFEDER STREUEREINSTELLUN SPEZ.FEDER RUTSCHE SZAPP. STRE SPEZ.FEDER RE SCHNECKE STREUER SPEZ.FEDER LI SCHNECKE STREUER DRUCKFEDER ZN BEHZLTER M80 BsCHSE MIT FLANSCH M80 EINSTELLMUTTER M80 DsNGERSTREUER RUTSCHE SP

cod. G19530265

Descripcion

MUELLE ESPEC. REGUL. ABONADORA MUELLE ESPEC.PLANO INCL.DISTR. MUELLE ESPEC. TORN.S/F DER. AB MUELLE ESPEC. TORN.S/F IZQ. AB MUELLE COMP.ZN DEPS. M80 A CASQUILLO CON BRIDA M80 CONTRATUERCA REGULACIN M80 G PLANO INCLINADO DISTR. ABON. S

TAV. 174 serb. 850 - 4 serb. 1100 - 64 38 33 50

serb. 850 - 7 serb. 1100 - 65

(*) (**)

25 6 31 36

mm 8 50 m m 1100

18 23 8

31 36

14 - L. 500 67 - L. 1180 68 - L. 1375

31 5

56 30

E D C B A

26 29

39 37 45

57 23

40 1

41 52

53 44

26 serb. 850 - 11 serb. 1100 - 66

850 2u. dx - 61 850 2u. sx - 69 850 3u. dx - 70 850 3u. sx - 71 1100 3u. dx - 72 1100 3u. sx - 73 1500 3u. dx - 74 1500 3u. sx - 75

48 19 20

13 49

32 (***) 21

55 47 24 34

2 - serb. 850 62 - serb. 1100

3 - serb. 850 63 - serb. 1100

*** Kit ingranaggi (2+2 pezzi)

60 12

cod. G19530265

TAV. 174

SERBATOI SPANDICONCIME Pos.

Cod.

56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75

G66248207 G66248218 F03150757 G19700821 G18701500 G15472790 G15271540 G15271550 G15471920 G15473130 G19003060 G20910045 G20910044 G15472800 G15472810 G15472820 G15272680 G15272720 G15471430 G15471440

Descrizione

Description

Benennung

Descripcion

TENDICATENA SPAND. SP-520 RONDELLA DISTAN.SPAND. TAPPO FILETT.SERBAT.PLASTICA TABELLA CONCIME SP540 RONDELLA 29,5 X38 X0,3 SERBATOIO 850 PLA.2U DX ASSE AGITATORE DX 1100 ASSE AGITATORE SX 1100 COPERCHIO SERBATOIO L.1100 GRIGLIA SERBATOIO 1100 PLAST. SERBATOIO 1100 PLASTICA MANICOTTO UNIONE L.1180 MANICOTTO UNIONE L.1375 SERBATOIO 850 PLA.2U SX SERBATOIO 850 PLA.3U DX SERBATOIO 850 PLA.3U SX SERBATOIO 1100 3U.DX PLA.COMP. SERBATOIO 1100 3U.SX PLA.COMP. SERBATOIO 1500 3U DX SERBATOIO 1500 3U SX

CHAIN TENSIONER MAN. SPR. SPACER WASHER PLASTIC TANK THREADED PLUG FERTILIZER CHART STICKER WASHER 29,5 X 38 X 0,3 PLAS.FERT.TANK 850 2 OUT. RH STIRRER SPINDLE-RIGHT 1100 TAN STIRRER SPINDLE- LEFT 1100 TANK COVER L.1100 PLASTIC TANK GRID 1100 PLASTIC TANK 1100 JOINT SLEEVE L.1180 JOINT SLEEVE L.1375 PLAS.FERT.TANK 850 2 OUT. L PLAS.FERT.TANK 850 3 OUT. RH PLAS.FERT.TANK 850 3 OUT. LH TANK ASSY.1100 RIGHT 3U TANK ASSY. 1100 LEFT 3U TANK ASSY.1500 LEFT 3U TANK ASSY.1500 LEFT 3U

TENDEUR DE CHAINE EPAND. ENGR. RONDELLE ENTRETOISE EP. ENGRAI BOUCHON FILETE RESERV.PLAST. DECALC. TABLEAU DE ENGRAIS RONDELLE 29,5 X38 X0,3 RESERV 850 PLA 2S COMPL DRT AXE AGITATEUR DRT.RESERV.1100 AXE AGITATEUR GCH. 1100 COUVERCLE RESERVOIR L.1100 GRILLE RESERVOIR PLAST.1100 RESERVOIR 1100 PLASTIQUE MANCHON RACCORD L. 1180 MANCHON RACCORD L. 1375 RESERV 850 PLA 2S COMPL GCH RESERV 850 PLA 3S COMPL DRT RESERV 850 PLA 3S COMPL GCH RESERV 1100 PLA 3S COMPL DRT RESERV 1100 PLA 3S COMPL GCH RESERV 1500 FER 3S COMPL DRT RESERV 1500 FER 3S COMPL DRT

KETTENSPANNER DsNGERSTR. SP-52 ABSTANDSCHEIBE DsNGERSTREUER GEWINDEPFROPFEN PLASTIKBEH. ABZIEHB. TABELLE D_NGER UNTERLEGSCHEIBE 29,5X38X0,3 BEHZLTER 850 PLAST. RE 2 AUSG. SAMENMISCHERACHSE RE BEH.1100 SAMENMISCHERACHSE LINKER 1100 BEHZLTERDECKEL L.1100 BEHZLTERGITTER PLAST.1100 PLASTIKBEHZLTER 1100 VERBINDUNGSMUFFE L.1180 VERBINDUNGSMUFFE L.1375 BEHZLTER 850 PLAST. LI 2 AUSG. BEHZLTER 850 PLAST. RE 3 AUSG. BEHZLTER 850 PLAST. LI 3 AUSG. KOMPL. BEHZLTER 1100 RE 3AUSG KOMPL. BEHZLTER 1100 LI 3AUSG KOMPL. BEHZLTER 500 LI 3U KOMPL. BEHZLTER 1500 LI 3U

TENSOR DE CADENA ABON. SP-520 ARANDELA DISTAN.ABONAD. TAPN ROSCADO DEPS.PLæSTICO DO CAL.TABLA ABONO ARANDELA 29,5 X38 X0,3 DEPSITO 850 PLA.2 SAL. DER. B EJE AGITAD.DER.DEPS.1100 COM A EJE AGITAD. IZQ. 1100 TAPA DEPS.L.1100 A REJILLA DEPSITO PLAST.1100 G DEPSITO 1100 PLæSTICA B MANGUITO DE UNIN L.1180 M MANGUITO DE UNIN L.1375 M DEPSITO 850 PLA.2 SAL. IZQ. B DEPSITO 850 PLA.3 SAL. DER. B DEPSITO 850 PLA.3 SAL. IZQ. B DEPS. COMPL.1100 DER. 3 SAL. B DEPS. COMPL.1100 IZQ. 3 SAL. B DEPS. COMPL.500 IZQ. 3 SAL. B DEPS. COMPL.1500 IZQ. 3 SAL. B

cod. G19530265

TAV. 313 12 22 23

(BBP) 10

15 19 20 25

21 1

14 12 (BBP) 9 14 28

19 19 27

11 18

6 5

19 11

19 14

7 19

4 8 (BBP)

24 16

20 BBP = Big Bag Plus (capacità totale 1000 litri / total capacity 1000 liters)

cod. G19530265

TAV. 313

SUPPORTI SERBATOIO SPANDICONCIME UNICO Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

G15273320 G15273330 G15273340 G15273350 F01020464 G15273441 G15273471 G07000028 G15273500 G15273520 G15273530 G15475560 G18904050 F20110706 F20110770 F01020125 F01020143 F01020462 F01200271 F01420059 F01020463 F01200306 G20970011 F01420060 G15273710 G15273720 G15273730 G15273740

Descrizione

Description

Benennung

Descripcion

FIANCO SUPPORTO INT. SX FIANCO SUPPORTO INT. DX FIANCO SUPPORTO EST. DX FIANCO SUPPORTO EST. SX VITE M10X1,5 X30 U5739 A2 IX SUPPORTO POST.DX SUPPORTO FRONTALE TUBO Q. 35X 4X2980 TUBO APPOGGIO FRONT.SX TUBO APPOGGIO FRONT.DX PIASTRA ATTACCO SUPPORTO TAPPO TUBO 35X35 MOLLA GUIDA 2 TUBI DEPRESS. CAV.Q.M10X 1,5X 30 47X 60 ZG CAVALLOTTO M14X96-119 ZN VITE M10X 1,5X75 U5737 8.8 ZG VITE M10X 1,5X65 U5737 A2 IX VITE M10X1,5 X20 U5739 A2 IX DADO M10X 1,5 U5588 A2 IX ROS.M10 10,5X 30X2,5 U6593 IX VITE M10X1,5 X25 U5739 A2 IX DADO 14 5588 6.8 ZN RONDELLA 28X4X14,5 ROS.M10 10,5X 30X2,5 U6593 ZG SUPPORTO SX TUBO MICRO SUPPORTO DX TUBO MICRO SUPPORTO LUNGO SX TUBO MICRO SUPPORTO LUNGO DX TUBO MICRO

INT. LEFT SUPPORT INT. RIGHT SUPPORT EXTERN. RIGHT SUPPORT EXTERN. LEFT SUPPORT BOLT M10X1,5 X 30 U5739 8.8 IX REAR SUPPORT RH. FRONT SUPPORT SQUARE PIPE 35 X 35 X 3 X 2980 TUBE REST LH. TUBE REST RH. REST COUPLING PLATE PLUG PIPE 35X35 TUBE GUIDE SPRING DISK SUPPORT.ELEMENT U BOLT SV U-BOLT M14X96 - 119 ZN BOLT 10X75 5737 8.G GALVANIZED BOLT M10X 1,5X 65 U5737 8.8 IX BOLT M10X1,5 X 20 U5739 8.8 IX NUT 10 5588 6.8 INOX WASHER 11X30X2,5 6593 A2 SCREW 10X25 5739 INOX A2 NUT M14X2 WASHER 28X4X14.5 WASHER 10,5X30 MICRO LEFT LONG SUPPORT MICRO PIPE SUPPORT R.T MICRO LH. LONG SUPPORT MICRO RH. LONG SUPPORT

SUPPORT INT. GCH. SUPPORT INT. DRT. SUPPORT EXTERNE DRT. SUPPORT EXTERNE GCH. VIS M10X1,5 X 30 U5739 8.8 IX SUPPORT ARRIERE DRT. SUPPORT AVANT TUBE CARRE 35 X 35 X 3 X 2980 TUBE REPOSE GCH. TUBE REPOSE DRT. PLAQUE ATTELAGE SUPPORT BOUCHON TUBE 35X35 RESSORT GUIDE-TUBES CAVALIER SUPPORT DISQUE SV CAVALIER M14X96 - 119 ZN VIS 10X75 5737 8.G ZN VIS M10X 1,5X 65 U5737 8.8 IX VIS M10X1,5 X 20 U5739 8.8 IX ECROU 10 5588 6.8 INOX RONDELLE 11X30X2,5 6593 A2 VIS 10X25 5739 INOX A2 ECROU M14X2 RONDELLE 28X4X14,5 RONDELLE 10,5X30 SUPPORT LONG GCH TUBE MICRO SUPPORT DROIT TUBE MICRO SUPPORT LONG GCH. TUBE MICRO SUPPORT LONG DROIT TUBE MICRO

LINKE INNENHALTERUNG RECHTE INNENHALTERUNG RECHTE EXT.HALTERUNG LINKE EXT.HALTERUNG SCHRAUBE M10X1,5 X 30 U5739 8. HINT. HALTERUNG RE VORD. HALTERUNG VIERKANTROHR 35 X 35 X 3 X 298 ROHRENAUFLAGE LI. ROHRENAUFLAGE RE. KUPPLUNGSPLATTE HALTERUNG ROHRPFROPFEN 35X35 EDER ROHRF_HRUNG VERBINDUNG SCHEIBENHALTERUNG S VERBINDUNG M14X96 - 119 ZN SCHRAUBE 10X75 5737 8.G ZN SCHRAUBE M10X 1,5X 65 U5737 8. SCHRAUBE M10X1,5 X 20 U5739 8. MUTTER 10 5588 6.8 INOX UNTERLEGSCHEIBE 11X30X2,5 6593 SCHRAUBE 10X25 5739 INOX A2 MUTTER M14X2 UNTERLEGSCHEIBE 28X4X14,5 SCHEIBE 10,5X30 LANGE HALTERUNG LI MICRO HALTERUNG RE MICRO LANGE HALTERUNG LI MICRO LANGE HALTERUNG RE MICRO

SOPORTE INTERIOR IZQ. SOPORTE INTERIOR DER. SOPORTE EXT. DER. SOPORTE EXT. IZQ. TORNIL. M10X1,5 X 30 U5739 8.8 SOPORTE TRASERO DER. SOPORTE DELANTERO TUBO CUADRADO 35 X 35 X 3 X 29 TUBO APOYO IZQ. TUBO APOYO DER. PLACA CONEXION SOPORTE TAP N TUBO 35X35 MUELLE GUA TUBOS PERNO EN U SOP. DISCO SV PERNO EN U M14X96 - 119 ZN TORNILLO 10X75 5737 8.G ZN TORNIL. M10X 1,5X 65 U5737 8.8 TORNIL. M10X1,5 X 20 U5739 8.8 TUERCA 10 5588 6.8 INOX ARANDELA 11X30X2,5 6593 A2 TORNILLO 10X25 5739 INOX A2 DADO M14X2 ARANDELA 28X4X14,5 ARANDELA 10,5X30 SOPORTE LARGO IZQ. TUBO MICRO SOPORTE DCHO TUBO MICRO SOPORTE LARGO IZQ. TUBO MICRO SOPORTE LARGO DER. TUBO MICRO

cod. G19530265

TAV. 323

57 41 42

BBP - 6 63

65 BBP - 60

3 - BBP 65

7 - BBP

69 66 68

2 - BBP BBP - 62 BBP - 58

BBP - 61

4 64

38 37

67 59 68

41 31 23 52

45 53 50 32 26

54 44 28

36 52

29 44

50 15

35 33

11 - BBP

18 BBP - 1

38 17 16 14

50 53 34

9 - BBP 11 - BBP

32 52 31 39 56 53

52 10

BBP = Big Bag Plus (capacità totale 1000 litri / total capacity 1000 liters)

cod. G19530265

TAV. 323

SERBATOIO SPANDICONCIME UNICO Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55

G15273232 G15273282 G15273311 G15273540 G15273560 G15273581 G15273840 G15273621 G15273750 G15273700 G15273610 G19003660 G16670180 G66248184 G66248187 G66248224 G65336089 G65336080 F03011155 G16021080 G68005092 G22505085 G15471930 G17170270 G20860086 G20860088 F06080196 G22230094 G14830390 G66248207 F03011081 G66248121 G66248218 G65338043 G18701650 G22220073 G19003160 G66248223 F02100114 F01070074 F01240012 F05150112 F01020426 F01200245 F01020462 F01200271 F01020463 F01020434 G20970140 F01410035 F01020043 F01200233 F01020419 F01020068 F01020398

Descrizione ASS.SERBATOIO SX. MTE300 ASS.SERBATOIO DX. MTE300 ASS.LAMIERA CENTRALE MTE300 LAMIERA APPOGGIO GRIGLIA TIRANTE INTERNO TEGOLO MTE300 GRIGLIA SERBATOIO MTE300 PORTA PULIZIA ASSE TRASM.L.2800 SUPPORTO COCLEA ASSE AGITAT.SERBAT.UNICO COMPL SUPPORTO INGRANAGGIO Z.15-DISTANZ.COMPL CHIUSURA USCITA SERB.SPAND.SP SCARICO SERB.SPAND.TIPO MICRO FERMO DISTRIBUTORE SPAND. MOLLA SPEC.TENUTA FERMO SPAND. MOLLA SPEC.SCARICO SPAND.T.M. GUARNIZIONE VETRO VETRO CONTROLLO LIVELLO SEMI TENDITORE GUARNIZIONE FERMO ASSE IN LAMIERA PROTEZIONE PROTEZIONE RINVIO SERBATOIO INGRANAGGIO 1/2 Z-12 F.Q. INGRANAGGIO 1/2 Z-12 F.T. CATENA 1/2 ISO 083 32 MAGLIE SUPPORTO CUSCINETTO CUSCINETTO FORO QUADRO TENDICATENA SPAND. SP-520 GUARNIZIONI LABBRO DE100 BOCCOLA CON FLANGIA M80 RONDELLA DISTAN.SPAND. MOLLA COMP.ZN SERB. M80 RONDELLA FORO QUADRO ZN RONDELLA 28X0,3X16,5 TAPPO PER FORO D.7 TAPPO SUPP.SPAND.D.11 SPINA E.P. 6X 30 U6873 C70 BR VIT.A.4,2X1,41X 25 6954 4.8NI DADO M 6X 1 U5448 5.8 ZG MANIGLIA GAMM MS 117 FIL.8 MM. VITE M 8X1,25X12 U5739 A2 IX DADO M 8X1,25 U5588 A2 IX VITE M10X1,5 X20 U5739 A2 IX DADO M10X 1,5 U5588 A2 IX VITE M10X1,5 X25 U5739 A2 IX VITE M 8X1,25X16 U5739 A2 IX RONDELLA 20X2X8,5 ROS.M6 6,4X12,5X1,6 U6592 IX VITE M 6X 1X 60 U5737 8.8 ZG DADO M 6X 1 U5588 A2 IX VITE M 6X1 X 16 U5739 A2 IX VITE M 8X1,25X40 U5737 8.8 ZG VITE M 6X 1X 12 U5739 8.8 ZG

cod. G19530265

Description

Benennung

Descripcion

GRID SUPPORT BRACKET INT. TIE ROD

+TRIER SUPPORT GRILLE TRINGLE INT.

GITTERHALTB_GEL INNERE SPANNSTANGE

ESTRIBO SOPORTE REJILLA TIRANTE INTERIOR

TANK GRID. MTE300 CLEANING DOOR TRANSMISSION SHAFT L. 2800 SCREW SUPPORT STIRRER SPINDLE BB300 TANK SUPPORT COMPLETE GEAR Z.15-SPACER OUTLET CLOSURE- MAN.SPREAD. TA MICRO TYPE MAN.SPR.TANK DISCH. FERT. SPR. DISTRIB. STOP SPEC.SPRING- BLOCK. MAN. SPR. SPEC.SPRING- MAN. SPR. DISCHAR GLASS SEAL SEED LEVEL CHECKING GLASS TURNBUCKLE GASKET PLATE AXLE STOP GUARD INTERNAL TRANSMISS. TANK PROTE GEAR 1/2 Z-12 F.Q. GEAR 1/2 Z-12 F.T. CUT-DOWN CHAIN .1/2 ISO 083 32 BEARING SUPPORT SQUARE-HOLED BEARING CHAIN TENSIONER LIP GASKET DE100 BUSHING W/ FLANGE M80 MAN. SPR. SPACER WASHER ZN TANK COMP.SPRING M80 WASHER 16,5X30X2,5 ZN WASHER 28X0-3X16-5 PLUG FOR D.7 HOLE PLUG MAN. SPR. SUPP. D.11 ELASTIC PIN 6X30 BOLT 4-2X25 DIN 7981 NUT 6 UNI 5448 5.8 ZN HANDLE BOLT M8 X1,25X 12 U5739 8.8 IX NUT M 8X1,25 U5588 6.8 IX BOLT M10X1,5 X 20 U5739 8.8 IX NUT 10 5588 6.8 INOX SCREW 10X25 5739 INOX A2 BOLT M 8X1,25X 16 U5739 8.8 IX WASHER 20X2X8,5 S. STEEL WASHER A2 D 6 6592* BOLT 6 X60 5737 8.G GALVANIZED NUT M 6X 1 U5588 IX BOLT M6 X1 X 16 U5739 8.8 IX BOLT 8 X40 5737 8.G GALVANIZED BOLT M 6X12

GRILLE RESERVOIR MTE300 PORTE DE NETTOYAGE AXE TRANSMISSION L.2800 SUPPORT VIS ALIMENTATION AXE AGITATEUR RESERVOIR BB300 SUPPORT ENGRENAGE Z.15 ENTRET. COMPL. FERMETURE SORTIE RESERVOIR FER TRAPPE DE VIDANGE TYPE MICRO ARRET DISTRIBUTEUR EP. ENGRAIS RESSORT SPEC. D'ETANCHEITE ARR RESSORT SPEC. DECHARGEMENT FER GARNITURE VERRE VITRE CONTROLE NIV. GRAINES TENDEUR GARNITURE ARRET AXE EN TOLE PROTECTION PROTECTION RENVOI TREMIE ENGRENAGE 1/2 Z-12 TROUS CARRE ENGRENAGE 1/2 Z-12 TROUS RONDS TRONCON CHAINE 1/2 ISO 083 32 SUPPORT PALIER ROULEMENT AL+SAGE CARR+ TENDEUR DE CHAINE EPAND. ENGR. GARNITURES LEVRE DE100 SUPPORT AVEC BRIDE M80 RONDELLE ENTRETOISE EP. ENGRAI RESSORT COMPL. ZN RESERVOIR M8 RONDELLE 16,5X30X2,5 ZN RONDELLE 28X0-3X16-5 BOUCHON POUR TROU D.7 P BOUCHON SUPPORT EP. ENGRAIS D. GOUJON ELASTIQUE 6X30 VIS 4-2X25 DIN 7981 ECROU 6 UNI 5448 5.8 ZN POIGNEE VIS M8 X1,25X 12 U5739 8.8 IX ECROU M 8X1,25 U5588 6.8 I VIS M10X1,5 X 20 U5739 8.8 IX ECROU 10 5588 6.8 INOX VIS 10X25 5739 INOX A2 VIS M 8X1,25X 16 U5739 8.8 IX RONDELLE 20X2X8,5 RONDELLE AC.INOX A2 D 6 6592* VIS 6 X60 5737 8.G ZN ECROU M 6X 1 U5588 I VIS M6 X1 X 16 U5739 8.8 IX VIS 8 X40 5737 8.G ZN VIS M 6X12

BEHZLTERGITTER MTE300 REINIGUNGST_R ANTRIEBSACHSE L.2800 HALTERUNG SCHNECKE SAMENMISCHERACHSE BEH. BB300 HALTERUNG ZAHNRAD Z.15-KOMPL. DISTANZST VERSCHLUSS AUSTRITT DsNGERSTR. BEHZLTERENTLADUNG STREUER TYP FESTSTELLVORRICHTUNG SZAPP. ST SPEZIALFEDER DICHTUNG STREUER SPEZIALFEDER STREUERENTLADUNG GLASDICHTUNG KONTROLLFENSTER SAMENSTAND DICHTUNGSSPANNER FESTSTELLVORRICHTUNG BLECHACHS SCHUTZ VORGELEGESCHUTZ BEH-LTER ZAHNRAD 1/2 Z-12 F.Q. ZAHNRAD 1/2 Z-12 F.T. KETTENLZNGE 1/2 ISO 083 32 GL LAGERBsCHSE VIERKANTLAGER KETTENSPANNER DsNGERSTR. SP-52 LIPPENDICHTUNG DE100 BsCHSE MIT FLANSCH M80 ABSTANDSCHEIBE DsNGERSTREUER DRUCKFEDER ZN BEHZLTER M80 UNTERLEGSCHEIBE 16,5X30X2,5 ZN UNTERLEGSCHEIBE 28X0-3X16-5 FROPFEN FsR LOCH D.7 T HALTERUNGSPFROPFEN DsNGERSTR. SPANNHUELSE 6X30 SCHRAUBE 4-2X25 DIN 7981 MUTTER 6 UNI 5448 5.8 ZN HANDGRIFF SCHRAUBE M8 X1,25X 12 U5739 8. MUTTER M 8X1,25 U5588 6.8 SCHRAUBE M10X1,5 X 20 U5739 8. MUTTER 10 5588 6.8 INOX SCHRAUBE 10X25 5739 INOX A2 SCHRAUBE M 8X1,25X 16 U5739 8. UNTERLEGSCHEIBE 20X2X8,5 EDELST.UNTERL.SCH. A2D6 6592* SCHRAUBE 6 X60 5737 8.G ZN MUTTER M 6X 1 U5588 SCHRAUBE M6 X1 X 16 U5739 8. SCHRAUBE 8 X40 5737 8.G ZN SCHRAUBE M 6X12

REJILLA DEPS. MTE300 PUERTA LIMPIEZA EJE TRANSM.L.2800 SOPORTE CËCLEA EJE AGITAD. DEPS. BB300 SOPORTE ENGRANAJE Z.15-DISTANC.COMPL CIERRE SALIDA DEPS. ABON. SP I DESCARGA DEPS. ABON.TIPO MICRD BLOQUEO DISTRIBUIDOR ABON. MUELLE ESPEC. RETENC. BLOQ MUELLE ESPEC. DESCARGA ABONAD. JUNTA VIDRIO VIDRIO CONTROL NIVEL SEMILLAS TENSOR JUNTA BLOQUEO EJE DE CHAPA PROTECCIN P PROTECCION ENVIO DEPOSITO ENGRANAJE 1/2 Z-12 F.Q. ENGRANAJE 1/2 Z-12 F.T. TRECHO CADENA 1/2 ISO 083 32 SOPORTE COJINETE COJINETE ORIFICIO CUADRADO TENSOR DE CADENA ABON. SP-520 GUA DELANTERA G CASQUILLO CON BRIDA M80 ARANDELA DISTAN.ABONAD. MUELLE COMP.ZN DEPS. M80 A ARANDELA 16,5X30X2,5 ZN ARANDELA 28X0-3X16-5 APN PARA AGUJERO D.7 DO TAPN SOPORTE ABON.D.11 D ESPINA ELASTICA 6X30 TORNILLO 4-2X25 DIN 7981 TUERCA 6 UNI 5448 5.8 ZN MANILLA TORNIL. M8 X1,25X 12 U5739 8.8 TUERCA M 8X1,25 U5588 6.8 TORNIL. M10X1,5 X 20 U5739 8.8 TUERCA 10 5588 6.8 INOX TORNILLO 10X25 5739 INOX A2 TORNIL. M 8X1,25X 16 U5739 8.8 ARANDELA 20X2X8,5 ARANDELA AC.INOX A2 D 6 6592* TORNILLO 6 X60 5737 8.G ZN TUERCA M 6X 1 U5588 TORNIL. M6 X1 X 16 U5739 8.8 TORNILLO 8 X40 5737 8.G ZN TORNILLO M 6X12

TAV. 323

57 41 42

BBP - 6 63

65 BBP - 60

3 - BBP 65

7 - BBP

69 66 68

2 - BBP BBP - 62 BBP - 58

BBP - 61

4 64

38 37

67 59 68

41 31 23 52

45 53 50 32 26

54 44 28

36 52

29 44

50 15

35 33

11 - BBP

18 BBP - 1

38 17 16 14

50 53 34

9 - BBP 11 - BBP

32 52 31 39 56 53

52 10

BBP = Big Bag Plus (capacità totale 1000 litri / total capacity 1000 liters)

cod. G19530265

TAV. 323

SERBATOIO SPANDICONCIME UNICO Pos.

Cod.

56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71

G20970125 F01420039 G15273771 G15273632 G15273680 G15273660 G15273670 G65336131 G66248098 F01020457 F01420049 F01060040 F01260043 F05150472 F06080487 F02250123

Descrizione

Description

Benennung

Descripcion

RONDELLA 28X2,5X6,5 ROS.M6 6,4X 24X 2 U6593 IX TELO COPRISERBATOIO MTE300 SUPPORTO TELO COPRISERBATOIO ASTA FISSAGGIO TELO TUBO TELO COPRISERBATOIO TUBO RINFORZO TELO ANELLO TUBO ASPIR.SEMINATORE TAPPO CONVOGLIATORE DEPR. SP VITE M8 X1,25X20 U5739 A2 IX ROS.M8 8,4X 32X 2 U6593 ZG BUL.M 8X1,25X 20 U5732 4.6 ZG DADO FLANG.M8 D6923 8.8 ZG PUNTALE PVC D.10 CATENA AGGANCIO TELO IN GOMMA RIVETTO STR. 4,8X 9 U9200A AL

WASHER 28X2-5X6-5 WASHER M6 6,4X24X2 U6593 IX HOPPER COVER-SHEET MTE300

RONDELLE 28X2-5X6-5 RONDELLE M6 6,4X24X2 U6593 IX TOILE COUVRE-TREMIE MTE300

UNTERLEGSCHEIBE 28X2-5X6-5 SCHEIBE M6 6,4X24X2 U6593 IX TRICHTERABDECKTUCH MTE300

ARANDELA 28X2-5X6-5 ARANDELA M6 6,4X24X2 U6593 IX ONA PROTEC. TOLVA MTE300

FIXING ROD HOPPER COVER-SHEET TUBE REINFORCEMENT ROD SEED DRILL ASPIRATN. TUBE RING AIR PUMP CONVEYOR PLUG SP BOLT M8 X1,25X 20 U5739 8.8 IX WASHER M8 8,4X32X2 U6593 ZG BOLT 8 X20 5732 4.6 GALVANIZED FLANGE NUT M8 DIN 6923 8.8 GAL PVC TIP D.10 RUBBER FRAME CONNECTION CHAIN PULL RIVET 4,8X 9 U9200A ALL

TIGE DE FIXATION TUBE TOILE COUVRE-TREMIE TIGE DE RENFORCEMENT BAGUE TUBE ASPIR. SEMEUR BOUCHON CONVOYEUR TURBINE SP VIS M8 X1,25X 20 U5739 8.8 IX RONDELLE M8 8,4X32X2 U6593 ZG VIS 8 X20 5732 4.6 ZN ECROU BRIDE .M8 DIN 6923 8.8 Z EMBOUT PVC D. 10 CHA+NE ACCROCHAGE TOILE EN CAO RIVET A RUPTURE 4,8X 9 U9200A

BEFESTIGUNGSTANGE ROHR TRICHTERABDECKTUCH VERSTZRKUNGSSTANGE SAUGROHRRING SZREIHE VAKUUM FTRDERPFROPFEN SP SCHRAUBE M8 X1,25X 20 U5739 8. SCHEIBE M8 8,4X32X2 U6593 ZG SCHRAUBE 8 X20 5732 4.6 ZN GEFLANSCHTE MUTTER M8 DIN6923 STTSSELSCHAFT PVC D.10 KETTE BEFESTIGUNG GUMMITUCH REISSNIETE 4,8X 9 U9200A ALL

VARILLA DE FIJACIN TUBO ONA PROTEC. TOLVA VARILLA DE REFUERZO ANILLO TUBO ASPIR.SEMBRADOR TAPN CONDUCTOR DEPR. SP D TORNIL. M8 X1,25X 20 U5739 8.8 ARANDELA M8 8,4X32X2 U6593 ZG TORNILLO 8 X20 5732 4.6 ZN TUERCA BRIDA M8 DIN 6923 8.8 Z PUNTAL PVC D.10 CADENA ENGANCHE LONA DE CAUCHO REMACHE DESGAR. 4,8X 9 U9200A

cod. G19530265

TAV. 184 52 41 1 51 50

Disco Assolcatore PROTETTO 38 PROTECTED Disc Coulter

26 27

29 7

9 13 40 12

19 43 17

48 18

30 36

53 54

10 33

32 24

35 36 34

5 38 44

6 15

25 31

6 46

cod. G19530265

TAV. 184

ELEMENTI DI CONCIMAZIONE Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54

G13825091 G15220540 G15223651 G15421761 G22505054 G15422231 G15470913 G16670600 G16670470 G16670270 G16670430 F01020235 F01200306 G15472290 G15472301 G15171660 G15473060 G18902770 G18902780 G18903200 G18903820 G18903900 G13825081 F01020156 F01020403 F02250521 F01020508 F01020476 F01020568 F01020514 F01200232 F01200270 F01200442 F01220048 F01410064 F01410076 F01420036 G15225500 F02200229 F02100089 F04010084 F02050631 F02300020 G66248248 F02200227 G15225240 G15110091 G18903911 G15225480 F03011075 G15225490 G15223651 G15225860 F01020470

Descrizione

Description

Benennung

Descripcion

DISCO ASSOLCATORE D.373 DADO M16X1,5 SX SUPPORTO CUSCINETTO DISCO FLANGIA INTERNA DISCO DISCO D.370 MT-600 RASCHIATERRA DISCO SUPPORTO MOLLA QUADRA DOPPIA FALCIONE ELEM.CONCIMAZ.QUADRA SUPPORTO MOLLA SX DISCHI CONC. SUPPORTO DISCHI CONCIMAZIONE SUPPORTO MOLLA DX DISCHI CONC. VITE M14X 2X220 U5737 8.8 ZG DADO 14 5588 6.8 ZN SUPPORTO RASCHIAT.DISCHI CONC. RASCHIATERRA INTERNO SUPP.DRITTO MOLLA DISCO CONC. TUBO DISCESA CONCIME MOLLA CONCIMAZIONE 20X20 DX MOLLA CONCIMAZIONE 20X20 SX FERMO SPIRALE MOLLA CONCIMAZIONE DISCO MOLLA RINF.CONCIMAZIONE DISCO BOCCOLA PARAPOLVERE DISCO VITE M12X1,75X50 U5737 8.8 ZG VITE 6 X16 5739 8.G ZN RIBATTINO TSC 6X19,8 A/2 VITE 12X25 5739 8.G ZN VITE M10X 1,5X30 U5739 8.8 ZG VITE M16X 2X45 U5739 8.8 ZG VITE 12X40 5739 8.G ZN DADO M 6X 1 U5588 6.8 ZG DADO 10 5588 6.8 ZN DADO M16X 1,5 U5589 6.8 ZG DADO M12X1,75 D980 8 ZG ROS.M10 10,5X 20X 2 U6592 ZG ROS.M12 13X 24X2,5 U6592 ZG ROS.M6 6,4X 18X 2 U6593 ZG DISCO ASSOLC.PROTETTO COMPL. COPIGLIA 5X 45 U1336 ZG SPINA E.P. 5X 36 U6873 C70 BR CUSCINETTO 3303 2RS ANELLO ARR.47 UNI 7437-75 FASCETTA STRING 32/50 TAPPO IN PLASTICA COPIGLIA 5X 30 U1336 ZG ESTRATTORE DISCHI ELEMENTO MT SCONTRO A U MOLLA FERMO TUBO D.35 FLANGIA INT.DISCO PROTTETTO ZN ANELLO DI TENUTA G24X32X4 BOCCOLA PARAP.DISCO PROTETTO SUPPORTO CUSCINETTO DISCO PROTEZIONE DISCHI VITE M10X 1,5X20 U5739 8.8 ZG

FURROW OPENER DISK D.373 NUT M16X1-5 LEFT DISK BEARING SUPPORT INNER DISK FLANGE TOOTHED DISK D.370 MT-600

DISQUE D. 373 6 T.D.6 ECROU M16X1-5 GCH SUPPORT PALIER DISQUE BRIDE INT. DISQUE DISQUE D370 MT A/MOY-ROUL

SCHEIBE SZSCHARENREISSER D.373 MUTTER M16X1-5 LI SCHEIBENLAGERBsCHSE INNENFLANSCH SCHEIBE SCHEIBE D.370 MT-600

DISCO SURCADOR D.373 TUERCA M16X1-5 IZQ SOPORTE COJINETE DISCO BRIDA INTERIOR DISCO DISCO D.370 MT-600

SQUARE SPRING SUPPORT BASIC SQUARE FERTILIZATION COU LEFT SPRING SUPPORT FOR FERT. FERTILIZATION DISC SUPPORT RIGHT MANURE DISKS SPRING SUPP BOLT M14X 2X220 U5737 8.8 ZG NUT M14X2 MANURE DISKS SOIL SCRAPER SUPP

SUPPORT RESSORT CARRE SOC +LEM. FERTILIS. RESSORT CA SUPPORT RESSORT GAUCHE DISQUES SUPPORT DISQUES FERTILISATION SUPP. RESSORT DRT DISQUES FUM. VIS M14X 2X220 U5737 8.8 ZG ECROU M14X2 SUPP. RACLEUR DISQUES FUMAGE

HALTERUNG VIERKANTFEDER S-SCHAR ELEM.D_NGUNG QUADR.FED HALTERUNG FEDER LINKS D_NGERSC HALTERUNG D_NGUNGSSCHEIBEN HALTERUNG FEDER RE DsNGUNGSSCH SCHRAUBE M14X 2X220 U5737 8. MUTTER M14X2 HALTER. ERDSCHABER DsNGUNGSSCH

SOPORTE MUELLE CUADRADO BOTA ELEM.ABONAD.MUELLE CUADRA SOPORTE MUELLE IZDO. DISC. CON SOPORTE DISCOS ABONO SOPORTE MUELLE DER DISCOS ABON TORNIL. M14X 2X220 U5737 8.8 DADO M14X2 SOPORTE RASCADOR DISCOS ABONO

FERTILISING DISK UPRIGHT SPRIN FERTILISER DOWN TUBE RIGHT MANURING SPRING 20X20 LEFT MANURING SPRING 20X20 SPIRAL STOP DISC FERTILIZATION SPRING DISC FERTILIZATION REINF. SPRI DISC DUST SEAL BUSH BOLT12X50 5737 8.G GALVANIZED BOLT M 6X16 RIVET TSC 6X19,8 A/2 BOLT M 12X25 BOLT M 10X30 BOLT M 16X 2X45 U5739 8.8 ZG BOLT M12X1,75X40 NUT 6 UNI 5588 6.8 GALVANIZED NUT M10 NUT 16X1-5 UNI 5589 6.8 GALVAN SELF LOCKING NUT M12X1,75 980V WASHER 10,5X21 PLANE WASHER D12 UNI 6592 ZN FLAT WASHER 6-6X 18X2 6593 ZN COMPL. PROTECTED DISC COULTER SPLIT PIN 5 X45 1336 GALVAN. PIN EL. 5 X36 DIN 1481 BEARING 3303 2RS STOP RING 47 UNI 7437-75 STRING FASTENING STRAPS 32/50 PLASTIC PLUG SPLIT PIN 5 X30 1336 GALVAN. SEED PLATE EXTRACTOR ELEM. MT STRIKER PIPE LOCK SPRING D.35 INNER DISK FLANGE SEALING RING G24X32X4 BUSHING PARAP.DISCO PROTETTO DISK BEARING SUPPORT DISC PROTECTION BOLT M 10X20

SUPP. DROIT RESSORT DISQUE FER COUDE DESCENTE ENGRAIS RESSORT FUMAGE 20X20 DRT RESSORT FUMAGE 20X20 GCH ARRET SPIRALE RESSORT FERTILISATION DISQUE RESSORT RENF. FERTILISATION DI DOUILLE PARE-POUSSI+RE DISQUE VIS 12X50 5737 8.G ZN VIS M 6X16 RIVET TSC 6X19,8 A/2 VIS M 12 X 25 VIS M 10X30 VIS M 16X 2X45 U5739 8.8 ZG VIS M12X1,75X40 ECROU 6 UNI 5588 6.8 ZN ECROU M10 ECROU 16X1-5 UNI 5589 6.8 ZN ECROU AUTOBL. M12X1,75 980-V RONDELLE 10,5X21 RONDELLE D12 UNI 6592 ZN ROND. PLATE 6-6X 18X2 6593 ZN DISQUE DU SOC PROT+G+ COMPLET GOUPILLE 5 X45 1336 ZN FICHE EL. 5 X36 DIN 1481 PALIER 3303 2RS BAGUE ARRET 47 UNI 7437-75 COLLIER DE SERRAGE 32/50 BOUCHON EN PLASTIQUE GOUPILLE 5 X30 1336 ZN EXTRACTEUR DISQUE ELEMENT MT BRIDE 150 MM RESSORT ARR-T TUBE D.35 BRIDE INT. DISQUE BAGUE D'ETANCHEITE G24X32X4 BOITE PARAP.DISCO PROTETTO SUPPORT PALIER DISQUE PROTECTION DISQUE VIS M 10X20

GERADE HALTERUNG FEDER D_NGERS DsNGERSENKROHR FEDER DsNGUNG 20X20 RE FEDER DsNGUNG 20X20 LI FESTSTELLVORRICHTUNG SPIRALE FEDER D_NGUNG SCHEIBE VERST. FEDER D_NGUNG SCHEIBE BUCHSE STAUBABDECKUNG SCHEIBE SCHRAUBE 12X50 5737 8.G ZN SCHRAUBE M 6X16 NIETE TSC 6X19,8 A/2 SCHRAUBE M 12 X 25 SCHRAUBE M 10X30 SCHRAUBE M 16X 2X45 U5739 8.8 SCHRAUBE M12X1,75X40 MUTTER 6 UNI 5588 6.8 ZN MUTTER M10 MUTTER 16X1-5 UNI 5589 6.8 ZN SIEHE 00553312 SCHEIBE 10,5X21 SCHEIBE D12 UNI 6592 ZN SCHEIBE 6-6X 18X2 6593 ZN GESCH_TZTE FURCHENFORMSCHEIBE SPLINT 5 X45 1336 ZN SPANNSTIFT 5 X36 DIN 1481 LAGER 3303 2RS RING 47 UNI 7437-75 ROHRSCHELLE 32/50 PLASTIKPFROPFEN SPLINT 5 X30 1336 ZN SCHEIBENAUSZIEHER ELEMENT MT ANSCHLAG ROHRSPERRFEDER D.35 INNENFLANSCH SCHEIBE DICHTRING G24X32X4 BUCHSE PARAP.DISCO PROTETTO SCHEIBENLAGERBsCHSE DISCSCHUTZ SCHRAUBE M 10X20

SOPORTE RECTO MUELLE DISCO ABO TUBO DESCENSO ABONO MUELLE ABONO 20X20 DER MUELLE ABONO 20X20 IZQ BLOQUEO ESPIRAL MUELLE ABONO DISCO MUELLE REF. ABONO DISCO MANGUITO GUARDAPOLVO DISCO TORNILLO 12X50 5737 8.G ZN TORNILLO M 6X16 REMACHE TSC 6X19,8 A/2 TORNILLO M 12 X 25 TORNILLO M 10X30 TORNILLO M16X 2X45 U5739 8.8 TORNILLO M12X1,75X40 TUERCA 6 UNI 5588 6.8 ZN DADO M10 TUERCA 16X1-5 UNI 5589 6.8 ZN DADO AUTOBL. M12X1,75 980-V ARANDELA 10,5X21 ARANDELA D12 UNI 6592 ZN ARAND. PLANA 6-6X 18X2 6593 ZN DISCO SURC.PROTEGIDO COMPL. PASADOR 5 X45 1336 ZN CLAVIJA EL.5 X36 DIN 1481 COJINETE 3303 2RS ANILLO PARADA 47 UNI 7437-75 ABRAZADERA APRET. 32/50 TAPN DE PLæSTICO D PASADOR 5 X30 1336 ZN EXTRACTOR DISCOS ELEMENTO MT ELEMENTO DE EMPALME MUELLE TOPE TUBO D. 35 BRIDA INTERIOR DISCO ANILLO AISLADOR G24X32X4 MANGUITO PARAP.DISCO PROTETTO SOPORTE COJINETE DISCO PROTECCIN DISCO TORNILLO M 10X20

cod. G19530265

TAV. 233 10 10 38

Z20

Z12 Z17

Z23 Z16 Z23

DX 11

12 5

Z20

Z30 Z25

4 Z10 Z15

2 15

20 16

L. 780 - 8 L. 1030 - 33 L. 1230 - 34 L. 1430 - 35 37

22 29

SP - 23 SF - 36

7 - SP 32 - SF

28 SP = serbatoio plastica / plastic hopper SF = serbatoio ferro / metal hopper

25 27

cod. G19530265

TAV. 233

SPEEDY SET Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38

F02100066 G19003660 F01070061 F01050083 G19702951 G19003680 G16670040 G16670320 F01420038 F01200233 G19003670 F01020419 G65336055 G19003720 G16670140 G19003690 F01080055 G16670100 G19003700 G66248173 G66248172 G66248211 G19002920 G18701500 G20860126 F01070075 G20970097 G66248178 G65336062 G19002850 F01070011 G13722330 G16670330 G16670340 G16670350 G66248176 G19003710 G19703261

Descrizione

Description

Benennung

Descripcion

SPINA EL.4 X36 DIN 1481 SUPPORTO VIT.A.3,9X1,34X 9,5 6954 4.8NI GRANO M 5X0,8X12 U5927 A2 IX DECAL.TAB.DISTRIB.SPEEDY-SET INGRANAGGIO Z.15 DISTR.COMPL.8PALE SPEEDY SET P TONDO D.10X780 ROS.M6 6,4X 18X 2 U6593 IX DADO M 6X 1 U5588 A2 IX MANOPOLA SPEEDY SET VITE M 6X1 X 16 U5739 A2 IX MOLLA SPEC.REGOL.SPAND. SP GHIERA REGOLAZIONE SX SUPPORTO MOLLA REGOLATORE CREMAGLIERA VITE 4X10 6109 INOX A2 REGOLATORE APERTURA COPERCHIO SPEEDY SET ASSE DISTR.SPAND. SP DOSATORE DISTR.SPAND. SP PERNO RONDELLA FUSA SPAND. SP CORPO DISTRIBUTORE SPANDI PLA. RONDELLA 29,5 X38 X0,3 KIT INGR DISTR CONCIME (2+2) VIT.A.4,2X1,41X 38 6954 4.8NI RONDELLA 32X3X4,5 SCIVOLO DISTR.SPAND. SP MOLLA SPEC.SCIV.DISTR.SPAND.SP PROTEZIONE PIGNONE VIT.A.4,2X1,41X 9,5 6950 4.8NI DISTR.COMPL.8PALE SPEEDY SET F TONDO D.10X1030 TONDO D.10X1230 TONDO D.10X1430 CORPO DISTR.SPAND. SP GHIERA REGOLAZIONE DX DECAL.DISTRIBUZIONE ST SPEEDY

PIN EL. 4X36 DIN 1481 SUPPORT BOLT 3-9X 9-5 DIN 7981 INOX GRUB-SCREW 5 X12 5927 SPEEDY-SET DISTRIB. CHART STI GEAR Z 15 COMPL.PLA.SPEEDY SET DISTR.8R D.10X780 ROUND WASHER M6 6,4X18X2 U6593 IX NUT M 6X 1 U5588 IX SPEEDY HANDLE SET BOLT M6 X1 X 16 U5739 8.8 IX SPEC SPRING MAN. SPR. ADJUSTM. LEFT ADJUSTMENT KNURLED NUT REGULATOR SPRING SUPPORT RACK SCREW 4X10 6109 INOX A2 OPENING REGULATOR COVER SPEEDY SET MANURE SPREADER DISTR. SPINDLE MAN.SPR. SEED METERING DEVICE MAN. SPR. CAST WASHER PIN. SP PLA. F.SPREADER DISTRIB.CASING WASHER 29,5 X 38 X 0,3 KIT- MAN. DISTR. GEARS BOLT 4-2X38 DIN 7981 WASHER 32X3X4-5 CHUTE- MANURE-SPREADER DISTRIB SPEC SPRING - MAN. SPR. DISTR. PINION GUARD BOLT- SELF-TAPPING 4-2X9-5T.E. COMPL.SPEEDY 8-BLADE DISTR. SE D.10X1030 ROUND D.10X1230 ROUND D.10X1430 ROUND MANURE SPREADER DISTR. CASING RIGHT ADJUSTMENT KNURLED

GOUPILLE EL.4 X36 DIN 1481 SUPPORT VIS 3-9X 9-5 DIN 7981 GOUJON 5 X12 5927 INOX DECALC.TABLEAU DISTRIB. SPE.-S ENGRENAGE Z 15 MINIMAX COMPL 8C PLA SPEEDYSET ROND D.10X780 RONDELLE M6 6,4X18X2 U6593 IX ECROU M 6X 1 U5588 I POIGN+E SPEEDY SET VIS M6 X1 X 16 U5739 8.8 IX RESSORT SPEC. REGL. EP. ENTRAI MANCHON DE REGLAGE GCH SUPPORT RESSORT R+GULATEUR CR+MAILL+RE VIS 4X10 6109 INOX A2 REGULATEUR OUVERTURE COUVERCLE SPEEDY SET AXE DISTRIBUTEUR EP.ENGRAIS SP DOSEUR DISTRIBUTEUR EP. ENGRAI PIVOT RONDELLE MOULEE EP. ENGR CORPS DISTRIBUTEUR EPAND. RONDELLE 29,5 X38 X0,3 COUPLE CON DISTR ENGRAIS (2+2) VIS 4-2X38 DIN 7981 RONDELLE 32X3X4-5 LANCOIR DISTRIBUTION EP. ENGR. RESS. SPEC. LANCOIR DISTR. EP. PROTECTION PIGNON VIS AUTOTAR. 4-2X9-5 T. E. COU DISTR.COMPL.8PALETTES SPEEDY S ROND D.10X1030 ROND D.10X1230 ROND D.10X1430 CORPS DISTRIB. EP. ENGRAIS SP BAGUE REGLAGE DROITE

SPANNSTIFT 4X36 DIN 1481 HALTERUNG SCHRAUBE 3-9X 9-5 DIN 7981 STIFT 5 X12 5927 INOX ABZIEHB. TAB.APPARAT SPEEDY-SE ZAHNRAD Z 15 KOMPL.DOSIER.SPEEDY SET PLA.8S RUNDEISEN D.10X780 SCHEIBE M6 6,4X18X2 U6593 IX MUTTER M 6X 1 U5588 GRIFF SPEEDY SET SCHRAUBE M6 X1 X 16 U5739 8. SPEZIALFEDER STREUEREINSTELLUN EINSTELLMUTTER LINKS HALTERUNG EINSTELLFEDER ZAHNSTANGE SCHRAUBE 4X10 6109 INOX A2 TFFNUNGSEINSTELLER DECKEL SPEEDY SET ACHSE SZAPPARAT STREUER SP DOSIERER DsNGERSTREUER. SP ZAPFEN LOSE UNTERLEGSCHEIBE ST VERTEILUNGSKTRPER STREUER PLA. UNTERLEGSCHEIBE 29,5X38X0,3 KIT ZAHNRZDER DsNGERSTREUER SCHRAUBE 4-2X38 DIN 7981 UNTERLEGSCHEIBE 32X3X4-5 DsNGERSTREUER RUTSCHE SP SPEZ.FEDER RUTSCHE SZAPP. STRE RITZELSCHUTZ SELBSTSCHNEID. SCHRAUBE 4-2X9SAATGUTAUS.8SCH.KOMPL.SPEEDY S RUNDEISEN D.10X1030 RUNDEISEN D.10X1230 RUNDEISEN D.10X1430 VERTEILUNGSKTRPER STREUER SP EINSTELLMUTTER RE

CLAVIJA EL.4 X36 DIN 1481 SOPORTE TORNILLO 3-9X 9-5 DIN 7981 TORNILLO SIN CABEZA 5 X12 5927 CAL.TABLA DISTRIB. SPEEDY-SET ENGRANAJE Z 15 DISTR.COMP.SPEEDY SET PLA.8AL. BARRA REDONDA D. 10X780 ARANDELA M6 6,4X18X2 U6593 IX TUERCA M 6X 1 U5588 EMPUÐADURA SPEEDY SET TORNIL. M6 X1 X 16 U5739 8.8 MUELLE ESPEC. REGUL. ABONADORA ROSCA REGULACION IZQUIERDA SOPORTE MUELLE REGULADOR CREMALLERA TORNILLO 4X10 6109 INOX A2 REGULADOR ABERTURA TAPA SPEEDY SET EJE DISTR. ABON. SP DOSIFICADOR DISTR.ABON. SP PERNO ARANDELA FUNDIDA ABONAD CUERPO DIST. ABONADORA PLæS. ARANDELA 29,5 X38 X0,3 SET ENGRANAJES DISTRIB. ABONO TORNILLO 4-2X38 DIN 7981 ARANDELA 32X3X4-5 PLANO INCLINADO DISTR. ABON. S MUELLE ESPEC.PLANO INCL.DISTR. PROTECCIN PI¾N PR TORNILLO AUTORROSC. 4-2X9-5 DISTR.COMPL.8PALETAS SPEEDY SE BARRA REDONDA D. 10X1030 BARRA REDONDA D. 10X1230 BARRA REDONDA D. 10X1430 CUERPO DISTR. ABON. SP CONTRATUERCA REGULACIN DER.

cod. G19530265

TAV. 271

21 46

35 14

28 7 42

33 36

36 26

25 10

29 22

27 37 32

30 9

M6 - 27 M4 - 3

23 24

8 5 38

40 18

17 40 41

M6x30 - 34 M4x12 - 16 M6x12 - 15 M6x25 - 6

cod. G19530265

TAV. 271

CONCIMAZIONE PNEUMATICA FILE ESTERNE Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

G13912101 G13912131 F01220011 G13912460 G13912470 F01020406 G15450390 G15450400 G15450410 G15450420 G15450431 G15470410 G15470420 G15471471 F01020398 F01020362 F02050631 F01440012 G15473770 G58162014 G15272690 G23440562 G23440563 G23440564 F01020048 F01020404 F01230016 F01020472 F01020476 F01030054 F01080044 F01230046 F01200232 F01020037 F01200270 F01410037 F01410064 G67320001 F01430047 F04010156 F02050609 F02150036 F03100367 F03100500 F02300023 F02300018 F05150060 F06220034

Descrizione

Description

Benennung

Descripcion

UGELLO CONCIMAZIONE PNEUMATICA TUBO CONCIMAZIONE PNEUMATICA DADO M 6X 1 D980 8 ZG COPRIVENTOLA LATO SCHIENALE COPRIVENTOLA LATO MOTORE VITE M 6X 1X 25 U5739 8.8 ZG PULEGGIA CONDOTTA PULEGGIA CONCIMAZ.PNEUMATICA RONDELLA X GIUNTO ELASTICO GIUNTO ELASTICO LAVORATO FLANGIA SUPP.CONC.PNEUM. RINFORZO ANTERIORE RINFORZO POSTERIORE SUPPORTO CONVOGLIATORE VITE M 6X 1X 12 U5739 8.8 ZG VITE M 4X0,7X 12 U5739 8.8 ZG ANELLO ARR.47 UNI 7437-75 ROS. 20X28X 2 D988 SOFFIANTE CONC.PNEUM.COMPL. ELEM.ELASTICO DEL GIUNTO 24.24 CONVOGLIATORE 2 U. DISTANZ.GUSCI SOFFIANTE HL/ID GRIGLIA DI PROTEZIONE HL/ID COPERCHIO CHIUSURA SOFF. HL/ID VITE M 6X 1X 75 U5737 8.8 ZG VITE M 6X 1X20 U5739 8.8 ZG DADO M 4X 0,7 D982 8 ZG VITE M10X 1,5X25 U5739 8.8 ZG VITE M10X 1,5X30 U5739 8.8 ZG VITE M 8X1,25X16 U5933 10.9 ZG VIT.M 5X 0,8X 14 U7688 4 8 ZG DADO M10X 1,25 D982 8 ZG DADO M 6X 1 U5588 6.8 ZG VITE M 6X 1X 30 U5737 8.8 ZG DADO 10 5588 6.8 ZN ROS.M6 6,4X12,5X1,6 U6592 ZG ROS.M10 10,5X 20X 2 U6592 ZG VENTOLA PLASTICA DISCO L80M8 ROS.M6 6,4X 11X0,7 U8842J ZG CUSC.d20 D47 B14 6204 2RSH ANELLO ARR.20 UNI 7435-75 LINGUETTA 6X 6X 20 U6604A TUBO FLESSIBILE PVC DI 75 TUBO EOLO 35 PU FASCETTA STRINGITUBO 77/95 FASCETTA STRINGITUBO 25/40 FASCETTA POLYAMIDE 9X360 31919 VOLANTINO M5 X 25 VPA/25

PNEUMATIC FERTIL. NOZZLE PIPE PNEUMATIC FERTILISATION SELF LOCKING NUT M6 BACK FAN PROTECTION MOTOR FAN PROTECTION BOLT M 6X25 DRIVEN PULLEY D.28 DRIVEN PULLEY LOCK WASHER LOCK COUPLING FLANGE SUPPORT FRONT REINFORCEMENT REAR REINFORCEMENT CONVEYOR SUPPORT BOLT M 6X12 SCREW 4X12 5739 8.G GALVANIZED STOP RING 47 UNI 7437-75 WASHER 20X28X2 DIN 988 COMPL. FERTILIZER PNEUMATIC BL ELASTIC ELEMENT OF JOINT 24.24 CONVEYOR 12 OUTLETS BLOWER SHELL SPACER HL/ID PROTECT. GRID HL/ID BLOWER CLOSING COVER . HL/ID BOLT 6 X75 5737 8.G GALVANIZ. BOLT 6X20 5739 8.G GALVANIZED NORM.SELF-LOCKING NUT 4 GALVAN BOLT 10X25 5739 8.G GALVANIZED BOLT M 10X30 BOLT 8X16 UNI5933 10.9 GALVANI BOLT 5 X14 7688 GALVANIZED SELF LOCKING NUT M10X1,25 NUT 6 UNI 5588 6.8 GALVANIZED BOLT 6 X30 5737 8.G GALVANIZED NUT M10 PLANE WASHER D.6 WASHER 10,5X21 PLASTIC FAN- DISK L80M8 WASHER D6 DIN 6798 D.INT.GALV.

BUSE FUMAGE PNEUMATIQUE TUBE FUMAGE PNEUMATIQUE ECROU AUTOBL. M6 PROTECTION ROTOR DOSSIER PROTECTION ROTOR MOTEUR VIS M 6X25 POULIE ENTRAINEE D. 28 POULIE ENTRAINEE RONDELLE DE BLOCAGE JOINT DE BLOCAGE BRIDE SUPPORT RENFORCEMENT AVANT RENFORCEMENT ARRIERE SUPPORT CONVOYEUR VIS M 6X12 VIS 4X12 5739 8.G ZN BAGUE ARRET 47 UNI 7437-75 RONDELLE 20X28X2 DIN 988 SOUFFLEUR ENGRAIS PNEUMATIQUE ELEM. ELASTIQUE DU JOINT 24.24 CONVOYEUR 12 SORTIES ENTRETOISE COQUES SOUFFLANTE H GRILLE DE PROTECTION HL/ID COUVERCLE FERMETURE SOUFFL. HL VIS 6 X75 5737 8.G ZN VIS 6X20 5739 8.G ZN ECROU AUTOB.NOR.4 ZN VIS 10X25 5739 8.G ZN VIS M 10X30 VIS 8X16 UNI 5933 10.9 ZN VIS 5 X14 7688 ZN ECROU AUTOBL. M10X1,25 ECROU 6 UNI 5588 6.8 ZN VIS 6 X30 5737 8.G ZN ECROU M10 RONDELLE D.6 RONDELLE 10,5X21 ROTOR PLASTIQUE DISQUE L80M8 RONDELLE D6 DIN 6798 D. INT. Z

DsSE PNEUMATISCHE DsNGUNG ROHR PNEUMATISCHE DsNGUNG SELBSTSPERR.MUTTER M6 RUECKENLAUFRADSCHUTZ MOTORLAUFRADSCHUTZ SCHRAUBE M 6X25 GETRIEBENE SCHEIBE D.28 GETRIEBENE SCHEIBE SPERRSCHEIBE SPERRKUPPLUNG LAGERFLANSCH VORDERE VERSTZRKUNG HINTERE VERSTZRKUNG HALTERUNG FTRDERER SCHRAUBE M 6X12 SCHRAUBE 4X12 5739 8.G ZN RING 47 UNI 7437-75 UNTERLEGSCHEIBE 20X28X2 DIN 98 PNEUMATISCHES GEBLZSE KOMPL. ELAST. KUPPLUNGSELEM. 24.24 TRICHTER MIT 12 AUSG-NGEN DISTANZSTsCK SCHALEN GELBZSE H SCHUTZGITTER HL/ID ABSCHLUSSDECKEL GEBL. HL/ID SCHRAUBE 6 X75 5737 8.G ZN SCHRAUBE 6X20 5739 8.G ZN SELBSTSP. MUTTER NOR. 4 ZN SCHRAUBE 10X25 5739 8.G ZN SCHRAUBE M 10X30 SCHRAUBE 8X16 UNI 5933 10.9 ZN SCHRAUBE 5 X14 7688 ZN SELBSTSPERR.MUTTER M10X1,25 MUTTER 6 UNI 5588 6.8 ZN SCHRAUBE 6 X30 5737 8.G ZN MUTTER M10 SCHEIBE D.6 SCHEIBE 10,5X21 SCHEIBE PLASTIKRAD L80M8 UNT. SCHEIBE D6 DIN 6798 D. IN

BOQUILLA DE ABONO NEUMATICA TUBO DE ABONO NEUMAT. DADO AUTOBL. M6 PROTECCIN VENTILADOR RESPALDOA PROTECCIN VENTILADOR MOTOR A TORNILLO M 6X25 POLEA CONDUCIDA D.28 POLEA CONDUCIDA ARANDELA DE BLOQUEO JUNTA DE BLOQUEO BRIDA DE SOPORTE REFUERZO DELANTERO REFUERZO TRASERO SOPORTE TRANSPORTADOR TORNILLO M 6X12 TORNILLO 4X12 5739 8.G ZN ANILLO PARADA 47 UNI 7437-75 ARANDELA 20X28X2 DIN 988 SOPLADOR ABONO NEUM-TICO COMPL ELEM.ELÁSTICO DEL ACOPLAMIENTO TRANSPORTADOR 12 SALIDAS DISTANC. CASCARAS SOPLAD. HL/I REJILLA DE PROTECCIN HL/ID G TAPA CIERRE SOPL. HL/ID TORNILLO 6x75 5737 8.G ZN TORNILLO 6X20 5739 8.G ZN TUERCA AUTOB. NOR. 4 ZN TORNILLO 10X25 5739 8.G ZN TORNILLO M 10X30 TORNILLO 8X16 UNI 5933 10.9 ZN TORNILLO 5 X14 7688 ZN DADO AUTOBL. M10X1,25 TUERCA 6 UNI 5588 6.8 ZN TORNILLO 6 X30 5737 8.G ZN DADO M10 ARANDELA D.6 ARANDELA 10,5X21 VENTILADOR PLæSTICO DISCO L80M ARANDELA D6 DIN 6798 D.INT.ZN

STOP RING 20 UNI 7435-75 TAB 06X6X20 UNI6604 FLEXIBLE PVC PIPE DI 75 EOLO PIPE 35 PU PIPE CLAMP 77/95 PIPE CLAMP 25/40 POLYAMIDE FASTENING STRAPS 9X3 HANDWHEEL M5 X 25 VPA/25

BAGUE ARRET 20 UNI 7435-75 LANGUETTE 06X6X20 UNI6604 TUBE FLEXIBLE PVC DI 75 TUBE EOLO 35 PU COLLIER DE SERRAGE 77/95 COLLIER SERRE-TUBE 25/40 COLLIER POLYAMIDE 9X350 31919 VOLANT M5 X 25 VPA/25

RING 20 UNI 7435-75 FEDERKEIL 06X6X20 UNI6604 75ER SCHLAUCH PVC ROHR EOLO 35 PU ROHRSCHELLE 77/95 ROHRSCHELLE 25/40 SCHELLE POLYAMID 9X350 31919 HANDRAD M5 X 25 VPA/25

ANILLO PARADA 20 UNI 7435-75 LENGsETA 06X6X20 UNI6604 TUBO FLEXIBLE PVC DI 75 TUBO EOLO 35 PU ABRAZADERA PARA MANGUERA 77/95 ABRAZADERA PARA MANGUERA 25/40 ABRAZADERA POLIAMIDA 9X350 319 VOLANTE M5 X 25 VPA/25

cod. G19530265

TAV. 194 33

22 32 6

Standard - 46 Umostart - 72

50 21

28 40

25 39 57

27 60 - L. 470 66 - L. 1110 67 - L. 550 68 - L. 440 69 - L. 690 70 - L. 1620 71 - L. 250

59 31

32 37

28 41 31 35

53 54

33 74

61 36

E D C B A

64 65

62 63

16 15

31 9

51 56

44 58 19 (*)

20 29

(*) Kit ingranaggi cod. 20890211 (2+2 pezzi)

cod. G19530265

TAV. 194

MICROGRANULATORE MTE Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55

G19002932 G15475231 G15273160 G15475271 G11425091 G15272411 G15272901 F01420036 G18904290 F01020404 G20890078 G20890079 G20890081 G20890089 G20890135 G20890151 G20890158 G20890194 G20890211 F01420011 G22220073 F20110706 F20110770 G15475390 G15272421 F01020397 F01020403 F01020472 F01070061 F01070121 F01200232 F01200270 F01200306 F01220033 F01410088 F02200161 F02200162 F02200194 F02100083 F02100089 F03011081 F02300016 G65336041 G65336046 G22250240 G19700831 G65338043 G66248119 G66248120 G66248121 G66248123 G66248125 G66248126 G66248138 G66248154

Descrizione

Description

Benennung

Descripcion

SERBATOIO MICRO 250 PLA. COPERCHIO MICRO 250 PLA. TIRANTE BARRA MICRO Q.150 SUPPORTO MICRO TUBO DISCESA MICRO MT-MTE COMP SUPPORTO TUBO MICRO DX SUPPORTO BARRA MICRO MT ROS.M6 6,4X 18X 2 U6593 ZG MOLLA GUIDA TUBO DISC.MICRO ZN VITE M 6X 1X20 U5739 8.8 ZG PIASTRA DI COLLEGAMENTO PIASTRA DI CHIUSURA ASSE DISTRIB.MICRO L.445 REGOLATORE DI APERTURA DISTRIB.NYLON COMPL.E SCIVOLO VITE-SCALA GRADUATA DOSATORE MICRO COMPL. ASSE AGITATORE SERB.MICRO 250 KIT INGRANAGGI DISTRIB.MICRO ROS.M4 4,3X 16X 1 U6593 ZG RONDELLA 28X0,3X16,5 CAV.Q.M10X 1,5X 30 47X 60 ZG CAVALLOTTO M14X96-119 ZN TUBO SUPPORTO MICRO L.3100 SUPPORTO TUBO MICRO SX VITE M 6X 1X 10 U5739 8.8 ZG VITE 6 X16 5739 8.G ZN VITE M10X 1,5X25 U5739 8.8 ZG VIT.A.3,9X1,34X 9,5 6954 4.8NI VIT.A.3,9X1,34X 9,5 6955 4.8NI DADO M 6X 1 U5588 6.8 ZG DADO 10 5588 6.8 ZN DADO 14 5588 6.8 ZN DADO M10X 1,5 D980 8 ZG ROS.M14 15X 28X2,5 U6592 ZG COPIGLIA 3X 15 U1336 ZG COPIGLIA 3X 20 U1336 ZG COPIGLIA 4X 25 U1336 ZG SPINA EL.5 X24 DIN 1481 SPINA E.P. 5X 36 U6873 C70 BR GUARNIZIONI LABBRO DE100 FASCETTA STRING.16/27 MOLLA SPEC.ZN STRINGITUBO M80 MOLLA SPEC.ZN SCIVOLO M80 DOSATORE COMPL. SV DECAL.TABELLA MICRO SP540 MOLLA COMP.ZN SERB. M80 RUOTA DENTATA Z-24 M80 RUOTA DENT.FORO QUAD.Z-24 M80 BOCCOLA CON FLANGIA M80 CORPO DISTRIBUZIONE M80 GHIERA REGOLAZIONE M80 SUPP.TRASMISSIONE M80 COPERCHIO SUPP.TRASM. M80 SCIVOLO DISTR. M80

PLASTIC TANK MICRO 250 PLASTIC COVER MICRO 250 SQUARE MICRO BAR TIE ROD 150 MICRO SUPPORT PIPE MICRO DESCENT MT-MTE RIGHT MICRO PIPE SUPPORT MT MICRO BAR SUPPORT FLAT WASHER 6-6X 18X2 6593 ZN MICRO GUIDE SPRING BOLT 6X20 5739 8.G GALVANIZED CONNECTION PLATE CLOSURE PLATE MICRO DISTR. SPINDLE- L. 445 OPENING REGULATOR DISTRIB. NYLON ASSY. AND CHUTE GRADUATED SCALE BOLT ROTOR DIST. MICRO 20 GROOVES STIRRER SPINDLE- MICRO TANK 25 KIT- MICRO. DISTR. GEARS FLAT WASHER 4-3X 16X1-5 6593 G WASHER 28X0-3X16-5 DISK SUPPORT.ELEMENT U BOLT SV U-BOLT M14X96 - 119 ZN MICRO SUPPORT PIPE L.3100 LEFT MICRO PIPE SUPPORT BOLT 6X10 5739 8.G GALVANIZED BOLT M 6X16 BOLT 10X25 5739 8.G GALVANIZED BOLT 3-9X 9-5 DIN 7981 BOLT 3-9X 9-5 DIN 7982 NUT 6 UNI 5588 6.8 GALVANIZED NUT M10 NUT M14X2 SELF LOCKING NUT M10X1,5 980-V PLANE WASHER D14 UNI 6592 ZN SPLIT PIN 3 X15 1336 GALVAN. SPLIT PIN 3 X20 1336 GALVAN. SPLIT PIN 4 X25 1336 GALVAN. PIN EL. 5 X24 DIN 1481 PIN EL. 5 X36 DIN 1481 LIP GASKET DE100 STRING FASTENING STRAPS .16/27 SPEC.SPRING ZN . PIPE CLAMP M8 SPEC SPRING ZN CHUTE M80 MICRO DISTR.ROTOR 8 GROOVES MICRO CHART STICKER SP540 ZN TANK COMP.SPRING M80 GEAR-WHEEL Z-24 M80 GEAR-WHEEL- SQUARE HOLE- Z-24 BUSHING W/ FLANGE M80 DISTRIBUTION CASING M80 ADJUSTMENT KNURLED NUT M80 TRANSM.SUPPORT M80 TRANSMISSION SUPP. COVER M80 CHUTE- DISTRIB. M80

RESERVOIR MICRO 250 PLASTIQUE COUVERCLE MICRO 250 PLASTIQUE TIRANT BARRE MICROGRANUL. CARR SUPPORT MICROGRANULATEUR TUBE DESCENTE MICRO COMPL MT-M SUPPORT TUBE MICRO DRT. SUPPORT BARRE MICROGRAN. MT ROND. PLATE 6-6X 18X2 6593 ZN RESSORT GUIDE MICRO VIS 6X20 5739 8.G ZN PLAQUE DE RACCORD PLAQUE DE FERMETURE AXE DISTRIBUTEUR MICRO L. 445 REGULATEUR D'OUVERTURE MINIMAX COMPL 20C MICRO VIS-ECHELLE GRADUEE ROTOR DOSEUR 20C MICRO AXE AGITATEUR RESERVOIR MICRO COUPLE CON DISTR MICRO (2+2) ROND.PLATE 4-3X 16X1-5 6593 ZN RONDELLE 28X0-3X16-5 CAVALIER SUPPORT DISQUE SV CAVALIER M14X96 - 119 ZN TUBE SUPPORT MICRO L3100 SUPPORT TUBE MICRO GCH. VIS 6X10 5739 8.G ZN VIS M 6X16 VIS 10X25 5739 8.G ZN VIS 3-9X 9-5 DIN 7981 VIS 3-9X 9-5 DIN 7982 ECROU 6 UNI 5588 6.8 ZN ECROU M10 ECROU M14X2 ECROU AUTOBL. M10X1,5 980-V RONDELLE D14 UNI 6592 ZN GOUPILLE 3 X15 1336 ZN GOUPILLE 3 X20 1336 ZN GOUPILLE 4 X25 1336 ZN FICHE EL. 5 X24 DIN 1481 FICHE EL. 5 X36 DIN 1481 GARNITURES LEVRE DE100 COLLIER DE SERRAGE 16/27 L RESSORT SPEC. ZN SERRE-TUBE M8 RESSORT SPEC. ZN LANCOIR M80 ROTOR DOSEUR 8C MICRO DECALC. TABLEAU MICRO SP540 RESSORT COMPL. ZN RESERVOIR M8 ROUE DENTEE Z-24 M80 ROUE DENTEE TROU CARRE Z-24 M8 SUPPORT AVEC BRIDE M80 CORPS DISTRIBUTION M80 BAGUE REGLAGE M80 SUPPORT ENTRAINEMENT M80 COUVERCLE SUPPORT ENTRAINEM. ENTONNOIR DOSEUR MINIMAX MICRO

MIKROGRANULATBEHZLTER PLAST. MIKRO DECKEL 250 PLAST. SPANNSTANGE STANGE MICRO Q.150 HALTERUNG MICRO SENKROHR MIKRO KOMPL. MT-MTE HALTERUNG MIKROROHR RE STANGENHALTERUNG MICRO MT SCHEIBE 6-6X 18X2 6593 ZN FsHRUNGSFEDER MIKRO SCHRAUBE 6X20 5739 8.G ZN VERBINDUNGSPLATTE ABSCHLUSSPLATTE MIKRO STREUERACHSE L 445 TFFNUNGSEINSTELLER SZAPPARAT NYLON KOMPL. UND RUT SCHRAUBE - GRADSKALA DOSIERER MIKRO KOMPL. 20 SEKT SAMENMISCHERACHSE BEH.MIKRO 25 KIT ZAHNRZDER MIKROSTREUER SCHEIBE 4-3X 16X1-5 6593 ZN UNTERLEGSCHEIBE 28X0-3X16-5 VERBINDUNG SCHEIBENHALTERUNG S VERBINDUNG M14X96 - 119 ZN ROHR HALTERUNG MIKRO L.3100 HALTERUNG MIKROROHR LI SCHRAUBE 6X10 5739 8.G ZN SCHRAUBE M 6X16 SCHRAUBE 10X25 5739 8.G ZN SCHRAUBE 3-9X 9-5 DIN 7981 SCHRAUBE 3-9X 9-5 DIN 7982 MUTTER 6 UNI 5588 6.8 ZN MUTTER M10 MUTTER M14X2 SELBSTSP.MUTT. M10X1,5 980-V SCHEIBE D14 UNI 6592 ZN SPLINT 3 X15 1336 ZN SPLINT 3 X20 1336 ZN SPLINT 4 X25 1336 ZN SPANNSTIFT 5 X24 DIN 1481 SPANNSTIFT 5 X36 DIN 1481 LIPPENDICHTUNG DE100 ROHRSCHELLE .16/27 L SPEZIALFEDER ZN ROHRSCHELLE M8 SPEZIALFEDER ZN RUTSCHE M80 DOSIERER KOMPL. SV ABZIEHB. TABELLE MIKOR SP540 DRUCKFEDER ZN BEHZLTER M80 ZAHNRAD Z-24 M80 RAD VERZAHNT VIERKANTLOCH.Z-24 BsCHSE MIT FLANSCH M80 VERTEILUNGSKTRPER EINSTELLMUTTER M80 ANTRIEBSHALTERUNG M80 DECKEL ANTRIEBSHALTERUNGS M80 SAAPPARAT RUTSCHE M80

DEPSITO MICRO 250 PLAST. TAPA MICRO 250 PLAST. TIRANTE BARRA MICRO C.150 SOPORTE MICRO TUBO DESCENSO MICRO COMPL. MTSOPORTE TUBO MICRO DER. SOPORTE BARRA MICRO MT ARAND. PLANA 6-6X 18X2 6593 ZN MUELLE GUID.MICRO TORNILLO 6X20 5739 8.G ZN PLACA DE CONEXIN P PLACA DE CIERRE EJE DISTRIB.MICRO L.445 REGULADOR DE ABERTURA DISTRIB.NYLON COMPL.Y PLANO IN TORNILLO - ESCALA GRADUADA DOSIFICADOR MICRO COMPL.20 SEC EJE AGITADOR DEPS. MICRO 250 A SET ENGRANAJES DISTRIB.MICRO ARAND. PLANA 4-3X 16X1-5 6593 ARANDELA 28X0-3X16-5 PERNO EN U SOP. DISCO SV PERNO EN U M14X96 - 119 ZN TUBO SOPORTE MICRO L.3100 SOPORTE TUBO MICRO IZQ. TORNILLO 6X10 5739 8.G ZN TORNILLO M 6X16 TORNILLO 10X25 5739 8.G ZN TORNILLO 3-9X 9-5 DIN 7981 TORNILLO 3-9X 9-5 DIN 7982 TUERCA 6 UNI 5588 6.8 ZN DADO M10 DADO M14X2 DADO AUTOBL. M10X1,5 980-V ARANDELA D14 UNI 6592 ZN PASADOR 3 X15 1336 ZN PASADOR 3 X20 1336 ZN PASADOR 4 X25 1336 ZN CLAVIJA EL.5 X24 DIN 1481 CLAVIJA EL.5 X36 DIN 1481 GUA DELANTERA G ABRAZADERA APRET.16/27 L MUELLE ESPEC. ZN APLASTA TUBOS MUELLE ESPEC. ZN PLANO INCLINA DOSIFICADOR COMPL. SV CAL.TABLA MICRO SP540 MUELLE COMP.ZN DEPS. M80 A RUEDA DENTADA Z-24 M80 RUEDA DENT.ORIFICIO CUAD.Z-24 CASQUILLO CON BRIDA M80 CUERPO DISTRIBUCIN M80 C CONTRATUERCA REGULACIN M80 G SOPORTE TRANSMISIN M80 S TAPA SOP. TRANSM. M80 PLANO INCLINADO DISTR. M80

cod. G19530265

TAV. 194 33

22 32 6

Standard - 46 Umostart - 72

50 21

28 40

25 39 57

27 60 - L. 470 66 - L. 1110 67 - L. 550 68 - L. 440 69 - L. 690 70 - L. 1620 71 - L. 250

59 31

32 37

28 41 31 35

53 54

33 74

61 36

E D C B A

64 65

62 63

16 15

31 9

51 56

44 58 19 (*)

20 29

(*) Kit ingranaggi cod. 20890211 (2+2 pezzi)

cod. G19530265

TAV. 194

MICROGRANULATORE MTE Pos.

Cod.

56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74

G15273020 G66248223 G20970100 G15475560 G20890111 G16675090 G15476280 G16675030 G15476270 G16675020 G20890112 G20890130 G20890201 G20890202 G20890203 G20890205 G19702460 G15110091 F01020235

Descrizione

Description

TUBO DISCESA MICRO D.28X2 TAPPO SUPP.SPAND.D.11 RONDELLA 30X0,5X22 ACC. TAPPO TUBO 35X35 MANIC.UNIONE RINV.MICRO L.470 TAPPO PLASTICA MICRO C/OR SERBATOIO MICRO PLA 1U COMPL SERB.MICRO 250 1U PLA 8P.COMPL SERBATOIO MICRO 250 2 U.PLA SERB.MICRO 250 2U PLA 8P.COMPL MANICOTTO UNIONE MICRO L.1110 MANICOTTO UNIONE MICRO L.550 MANICOTTO UNIONE MICRO L.440 MANICOTTO UNIONE MICRO L.690 MANICOTTO UNIONE MICRO L.1620 MANICOTTO UNIONE MICRO L.250 DECAL.TABELLA DISTRIB.UMOSTART SCONTRO A U VITE M14X 2X220 U5737 8.8 ZG

PIPE- MICRO .DESCENT D.28X2 PLUG MAN. SPR. SUPP. D.11 WASHER 30X0-5X22 ACC. PLUG PIPE 35X35 MICRO TRANSM.JOINT SLEEVE L.47

TUBE DESCENTE MICRO D.28X2 SENKROHR MIKRO D.28X2 BOUCHON SUPPORT EP. ENGRAIS D. HALTERUNGSPFROPFEN DsNGERSTR. RONDELLE 30X0-5X22 ACIER UNTERLEGSCHEIBE 30X0-5X22 ACC. BOUCHON TUBE 35X35 ROHRPFROPFEN 35X35 MANCHON RACCORD TRANSMISSION M VERBINDUNGSMUFFE VORGELEGE MIK

TUBO DESCENSO MICRO D.28X2 TAPN SOPORTE ABON.D.11 D ARANDELA 30X0-5X22 ACC. TAP N TUBO 35X35 MANGUITO EMPALME TRANSM. MICRO

COMPL. MICRO TANK PLA 1U MICRO TANK 250 1 OUTPUTS 8P. C MICRO TANK 250 2 OUTPUTS MICRO TANK 250 2 OUTPUTS 8P. C MICRO JOINT SLEEVE L.1110 MICRO JOINT SLEEVE MICRO JOINT SLEEVE L.440 MICRO JOINT SLEEVE L.690 MICRO JOINT SLEEVE L.1620 MICRO JOINT SLEEVE L.250 UMOSTART DISTRIBUTOR CHART STI STRIKER BOLT M14X 2X220 U5737 8.8 ZG

RESERVOIR MICRO PLA 1U COMPL. RESERV. MICRO 250 1 SORT. 8P. RESERVOIR MICRO 250 2 SORTIES RESERV. MICRO 250 2 SORT. 8P. MANCHON RACCORD MICRO L. 1110 MANCHON RACCORD MICRO L. 550 MANCHON RACCORD MICRO L. 440 MANCHON RACCORD MICRO L. 690 MANCHON RACCORD MICRO L. 1620 MANCHON RACCORD MICRO L. 250 DECALC. TABLEAU DISTRIBUTEUR U BRIDE 150 MM VIS M14X 2X220 U5737 8.8 ZG

DEPOSITO MICRO PLA 1U COMPL. DEPSITO MICRO 250 1 SALIDAS 8P DEPSITO MICRO 250 2 SALIDAS B DEPSITO MICRO 250 2 SALIDAS 8P MANGUITO DE UNIN MICRO L.1110M MANGUITO DE UNIN MICRO L.550 M MANGUITO DE UNIN MICRO L.440 M MANGUITO DE UNIN MICRO L.690 M MANGUITO DE UNIN MICRO L.1620M MANGUITO DE UNIN MICRO L.250 M CAL.TABLA DISTRIBUDOR UMOSTART ELEMENTO DE EMPALME TORNIL. M14X 2X220 U5737 8.8

cod. G19530265

Benennung

BEH-LTER MIKROGRANULAT PLASTIK MIKROGRANULATBEH. 250 1AUSG. 8 MIKROGRANULATBEHZLTER 250 2 AU MIKROGRANULATBEH. 250 2AUSG. 8 VERBINDUNGSMUFFE MIKRO L1110 VERBINDUNGSMUFFE MIKRO L 550 VERBINDUNGSMUFFE MIKRO L.440 VERBINDUNGSMUFFE MIKRO L.690 VERBINDUNGSMUFFE MIKRO L.1620 VERBINDUNGSMUFFE MIKRO L.250 ABZIEHB. TABELLE SZAPPARAT UMO ANSCHLAG SCHRAUBE M14X 2X220 U5737 8.

Descripcion

TAV. 204 6 Standard - 46 Umostart - 74

22 41

50 21

28 40

39 57

32 31

11 59

27 26

28 41 31 35

13 61

53 54

E D C B A

32 42

64 65 15

52 27 14

60 - L. 470 66 - L. 1110 67 - L. 550 68 - L. 440 69 - L. 690 70 - L. 1620 71 - L. 250

62 63

56 58

44 45

19(*) 20 29

55 (*) Kit ingranaggi cod. 20890211 (2+2 pezzi)

cod. G19530265

TAV. 204

MICROGRANULATORE MTE300 - MTE250 Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55

G19002932 G15475231 F01020235 G15475271 G11425091 G15272411 G15272901 F01420036 G18904290 F01020404 G20890078 G20890079 G20890081 G20890089 G20890135 G20890151 G20890158 G20890194 G20890211 F01420011 G22220073 F20110706 G15110091 G15472990 G15272421 F01020397 F01020403 F01020472 F01070061 F01070121 F01200232 F01200270 F01200306 F01220033 F01410088 F02200161 F02200162 F02200194 F02100083 F02100089 F03011081 F02300016 G65336041 G65336046 G22250240 G19700831 G65338043 G66248119 G66248120 G66248121 G66248123 G66248125 G66248126 G66248138 G66248154

Descrizione

Description

Benennung

Descripcion

SERBATOIO MICRO 250 PLA. COPERCHIO MICRO 250 PLA. VITE M14X 2X220 U5737 8.8 ZG SUPPORTO MICRO TUBO DISCESA MICRO MT-MTE COMP SUPPORTO TUBO MICRO DX SUPPORTO BARRA MICRO MT ROS.M6 6,4X 18X 2 U6593 ZG MOLLA GUIDA TUBO DISC.MICRO ZN VITE M 6X 1X20 U5739 8.8 ZG PIASTRA DI COLLEGAMENTO PIASTRA DI CHIUSURA ASSE DISTRIB.MICRO L.445 REGOLATORE DI APERTURA DISTRIB.NYLON COMPL.E SCIVOLO VITE-SCALA GRADUATA DOSATORE MICRO COMPL. ASSE AGITATORE SERB.MICRO 250 KIT INGRANAGGI DISTRIB.MICRO ROS.M4 4,3X 16X 1 U6593 ZG RONDELLA 28X0,3X16,5 CAV.Q.M10X 1,5X 30 47X 60 ZG SCONTRO A U TUBO Q. 35X 4X 600 SUPPORTO TUBO MICRO SX VITE M 6X 1X 10 U5739 8.8 ZG VITE 6 X16 5739 8.G ZN VITE M10X 1,5X25 U5739 8.8 ZG VIT.A.3,9X1,34X 9,5 6954 4.8NI VIT.A.3,9X1,34X 9,5 6955 4.8NI DADO M 6X 1 U5588 6.8 ZG DADO 10 5588 6.8 ZN DADO 14 5588 6.8 ZN DADO M10X 1,5 D980 8 ZG ROS.M14 15X 28X2,5 U6592 ZG COPIGLIA 3X 15 U1336 ZG COPIGLIA 3X 20 U1336 ZG COPIGLIA 4X 25 U1336 ZG SPINA EL.5 X24 DIN 1481 SPINA E.P. 5X 36 U6873 C70 BR GUARNIZIONI LABBRO DE100 FASCETTA STRING.16/27 MOLLA SPEC.ZN STRINGITUBO M80 MOLLA SPEC.ZN SCIVOLO M80 DOSATORE COMPL. SV DECAL.TABELLA MICRO SP540 MOLLA COMP.ZN SERB. M80 RUOTA DENTATA Z-24 M80 RUOTA DENT.FORO QUAD.Z-24 M80 BOCCOLA CON FLANGIA M80 CORPO DISTRIBUZIONE M80 GHIERA REGOLAZIONE M80 SUPP.TRASMISSIONE M80 COPERCHIO SUPP.TRASM. M80 SCIVOLO DISTR. M80

PLASTIC TANK MICRO 250 PLASTIC COVER MICRO 250 BOLT M14X 2X220 U5737 8.8 ZG MICRO SUPPORT PIPE MICRO DESCENT MT-MTE RIGHT MICRO PIPE SUPPORT MT MICRO BAR SUPPORT FLAT WASHER 6-6X 18X2 6593 ZN MICRO GUIDE SPRING BOLT 6X20 5739 8.G GALVANIZED CONNECTION PLATE CLOSURE PLATE MICRO DISTR. SPINDLE- L. 445 OPENING REGULATOR DISTRIB. NYLON ASSY. AND CHUTE GRADUATED SCALE BOLT ROTOR DIST. MICRO 20 GROOVES STIRRER SPINDLE- MICRO TANK 25 KIT- MICRO. DISTR. GEARS FLAT WASHER 4-3X 16X1-5 6593 G WASHER 28X0-3X16-5 DISK SUPPORT.ELEMENT U BOLT SV STRIKER SQUARE PIPE 35 X4 X600 LEFT MICRO PIPE SUPPORT BOLT 6X10 5739 8.G GALVANIZED BOLT M 6X16 BOLT 10X25 5739 8.G GALVANIZED BOLT 3-9X 9-5 DIN 7981 BOLT 3-9X 9-5 DIN 7982 NUT 6 UNI 5588 6.8 GALVANIZED NUT M10 NUT M14X2 SELF LOCKING NUT M10X1,5 980-V PLANE WASHER D14 UNI 6592 ZN SPLIT PIN 3 X15 1336 GALVAN. SPLIT PIN 3 X20 1336 GALVAN. SPLIT PIN 4 X25 1336 GALVAN. PIN EL. 5 X24 DIN 1481 PIN EL. 5 X36 DIN 1481 LIP GASKET DE100 STRING FASTENING STRAPS .16/27 SPEC.SPRING ZN . PIPE CLAMP M8 SPEC SPRING ZN CHUTE M80 MICRO DISTR.ROTOR 8 GROOVES MICRO CHART STICKER SP540 ZN TANK COMP.SPRING M80 GEAR-WHEEL Z-24 M80 GEAR-WHEEL- SQUARE HOLE- Z-24 BUSHING W/ FLANGE M80 DISTRIBUTION CASING M80 ADJUSTMENT KNURLED NUT M80 TRANSM.SUPPORT M80 TRANSMISSION SUPP. COVER M80 CHUTE- DISTRIB. M80

RESERVOIR MICRO 250 PLASTIQUE COUVERCLE MICRO 250 PLASTIQUE VIS M14X 2X220 U5737 8.8 ZG SUPPORT MICROGRANULATEUR TUBE DESCENTE MICRO COMPL MT-M SUPPORT TUBE MICRO DRT. SUPPORT BARRE MICROGRAN. MT ROND. PLATE 6-6X 18X2 6593 ZN RESSORT GUIDE MICRO VIS 6X20 5739 8.G ZN PLAQUE DE RACCORD PLAQUE DE FERMETURE AXE DISTRIBUTEUR MICRO L. 445 REGULATEUR D'OUVERTURE MINIMAX COMPL 20C MICRO VIS-ECHELLE GRADUEE ROTOR DOSEUR 20C MICRO AXE AGITATEUR RESERVOIR MICRO COUPLE CON DISTR MICRO (2+2) ROND.PLATE 4-3X 16X1-5 6593 ZN RONDELLE 28X0-3X16-5 CAVALIER SUPPORT DISQUE SV BRIDE 150 MM TUBE CARRE 35 X4 X600 SUPPORT TUBE MICRO GCH. VIS 6X10 5739 8.G ZN VIS M 6X16 VIS 10X25 5739 8.G ZN VIS 3-9X 9-5 DIN 7981 VIS 3-9X 9-5 DIN 7982 ECROU 6 UNI 5588 6.8 ZN ECROU M10 ECROU M14X2 ECROU AUTOBL. M10X1,5 980-V RONDELLE D14 UNI 6592 ZN GOUPILLE 3 X15 1336 ZN GOUPILLE 3 X20 1336 ZN GOUPILLE 4 X25 1336 ZN FICHE EL. 5 X24 DIN 1481 FICHE EL. 5 X36 DIN 1481 GARNITURES LEVRE DE100 COLLIER DE SERRAGE 16/27 L RESSORT SPEC. ZN SERRE-TUBE M8 RESSORT SPEC. ZN LANCOIR M80 ROTOR DOSEUR 8C MICRO DECALC. TABLEAU MICRO SP540 RESSORT COMPL. ZN RESERVOIR M8 ROUE DENTEE Z-24 M80 ROUE DENTEE TROU CARRE Z-24 M8 SUPPORT AVEC BRIDE M80 CORPS DISTRIBUTION M80 BAGUE REGLAGE M80 SUPPORT ENTRAINEMENT M80 COUVERCLE SUPPORT ENTRAINEM. ENTONNOIR DOSEUR MINIMAX MICRO

MIKROGRANULATBEHZLTER PLAST. MIKRO DECKEL 250 PLAST. SCHRAUBE M14X 2X220 U5737 8. HALTERUNG MICRO SENKROHR MIKRO KOMPL. MT-MTE HALTERUNG MIKROROHR RE STANGENHALTERUNG MICRO MT SCHEIBE 6-6X 18X2 6593 ZN FsHRUNGSFEDER MIKRO SCHRAUBE 6X20 5739 8.G ZN VERBINDUNGSPLATTE ABSCHLUSSPLATTE MIKRO STREUERACHSE L 445 TFFNUNGSEINSTELLER SZAPPARAT NYLON KOMPL. UND RUT SCHRAUBE - GRADSKALA DOSIERER MIKRO KOMPL. 20 SEKT SAMENMISCHERACHSE BEH.MIKRO 25 KIT ZAHNRZDER MIKROSTREUER SCHEIBE 4-3X 16X1-5 6593 ZN UNTERLEGSCHEIBE 28X0-3X16-5 VERBINDUNG SCHEIBENHALTERUNG S ANSCHLAG VIERKANTROHR 35 X4 X600 HALTERUNG MIKROROHR LI SCHRAUBE 6X10 5739 8.G ZN SCHRAUBE M 6X16 SCHRAUBE 10X25 5739 8.G ZN SCHRAUBE 3-9X 9-5 DIN 7981 SCHRAUBE 3-9X 9-5 DIN 7982 MUTTER 6 UNI 5588 6.8 ZN MUTTER M10 MUTTER M14X2 SELBSTSP.MUTT. M10X1,5 980-V SCHEIBE D14 UNI 6592 ZN SPLINT 3 X15 1336 ZN SPLINT 3 X20 1336 ZN SPLINT 4 X25 1336 ZN SPANNSTIFT 5 X24 DIN 1481 SPANNSTIFT 5 X36 DIN 1481 LIPPENDICHTUNG DE100 ROHRSCHELLE .16/27 L SPEZIALFEDER ZN ROHRSCHELLE M8 SPEZIALFEDER ZN RUTSCHE M80 DOSIERER KOMPL. SV ABZIEHB. TABELLE MIKOR SP540 DRUCKFEDER ZN BEHZLTER M80 ZAHNRAD Z-24 M80 RAD VERZAHNT VIERKANTLOCH.Z-24 BsCHSE MIT FLANSCH M80 VERTEILUNGSKTRPER EINSTELLMUTTER M80 ANTRIEBSHALTERUNG M80 DECKEL ANTRIEBSHALTERUNGS M80 SAAPPARAT RUTSCHE M80

DEPSITO MICRO 250 PLAST. TAPA MICRO 250 PLAST. TORNIL. M14X 2X220 U5737 8.8 SOPORTE MICRO TUBO DESCENSO MICRO COMPL. MTSOPORTE TUBO MICRO DER. SOPORTE BARRA MICRO MT ARAND. PLANA 6-6X 18X2 6593 ZN MUELLE GUID.MICRO TORNILLO 6X20 5739 8.G ZN PLACA DE CONEXIN P PLACA DE CIERRE EJE DISTRIB.MICRO L.445 REGULADOR DE ABERTURA DISTRIB.NYLON COMPL.Y PLANO IN TORNILLO - ESCALA GRADUADA DOSIFICADOR MICRO COMPL.20 SEC EJE AGITADOR DEPS. MICRO 250 A SET ENGRANAJES DISTRIB.MICRO ARAND. PLANA 4-3X 16X1-5 6593 ARANDELA 28X0-3X16-5 PERNO EN U SOP. DISCO SV ELEMENTO DE EMPALME TUBO CUADRADO 35 X4 X600 SOPORTE TUBO MICRO IZQ. TORNILLO 6X10 5739 8.G ZN TORNILLO M 6X16 TORNILLO 10X25 5739 8.G ZN TORNILLO 3-9X 9-5 DIN 7981 TORNILLO 3-9X 9-5 DIN 7982 TUERCA 6 UNI 5588 6.8 ZN DADO M10 DADO M14X2 DADO AUTOBL. M10X1,5 980-V ARANDELA D14 UNI 6592 ZN PASADOR 3 X15 1336 ZN PASADOR 3 X20 1336 ZN PASADOR 4 X25 1336 ZN CLAVIJA EL.5 X24 DIN 1481 CLAVIJA EL.5 X36 DIN 1481 GUA DELANTERA G ABRAZADERA APRET.16/27 L MUELLE ESPEC. ZN APLASTA TUBOS MUELLE ESPEC. ZN PLANO INCLINA DOSIFICADOR COMPL. SV CAL.TABLA MICRO SP540 MUELLE COMP.ZN DEPS. M80 A RUEDA DENTADA Z-24 M80 RUEDA DENT.ORIFICIO CUAD.Z-24 CASQUILLO CON BRIDA M80 CUERPO DISTRIBUCIN M80 C CONTRATUERCA REGULACIN M80 G SOPORTE TRANSMISIN M80 S TAPA SOP. TRANSM. M80 PLANO INCLINADO DISTR. M80

cod. G19530265

TAV. 204 6 Standard - 46 Umostart - 74

22 41

50 21

28 40

39 57

32 31

11 59

27 26

28 41 31 35

13 61

53 54

E D C B A

32 42

64 65 15

52 27 14

60 - L. 470 66 - L. 1110 67 - L. 550 68 - L. 440 69 - L. 690 70 - L. 1620 71 - L. 250

62 63

56 58

44 45

19(*) 20 29

55 (*) Kit ingranaggi cod. 20890211 (2+2 pezzi)

cod. G19530265

TAV. 204

MICROGRANULATORE MTE300 - MTE250 Pos.

Cod.

56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74

G15273020 G66248223 G20970100 G15475560 G20890111 G16675090 G15476280 G16675030 G15476270 G16675020 G20890112 G20890130 G20890201 G20890202 G20890203 G20890205 G15475300 G15272921 G19702460

Descrizione

Description

TUBO DISCESA MICRO D.28X2 TAPPO SUPP.SPAND.D.11 RONDELLA 30X0,5X22 ACC. TAPPO TUBO 35X35 MANIC.UNIONE RINV.MICRO L.470 TAPPO PLASTICA MICRO C/OR SERBATOIO MICRO PLA 1U COMPL SERB.MICRO 250 1U PLA 8P.COMPL SERBATOIO MICRO 250 2 U.PLA SERB.MICRO 250 2U PLA 8P.COMPL MANICOTTO UNIONE MICRO L.1110 MANICOTTO UNIONE MICRO L.550 MANICOTTO UNIONE MICRO L.440 MANICOTTO UNIONE MICRO L.690 MANICOTTO UNIONE MICRO L.1620 MANICOTTO UNIONE MICRO L.250 TUBO SUPPORTO MICRO L.1170 SUPP.BARRA MICRO SENZA SPANDI DECAL.TABELLA DISTRIB.UMOSTART

PIPE- MICRO .DESCENT D.28X2 PLUG MAN. SPR. SUPP. D.11 WASHER 30X0-5X22 ACC. PLUG PIPE 35X35 MICRO TRANSM.JOINT SLEEVE L.47

TUBO DESCENSO MICRO D.28X2 TAPN SOPORTE ABON.D.11 D ARANDELA 30X0-5X22 ACC. TAP N TUBO 35X35 MANGUITO EMPALME TRANSM. MICRO

COMPL. MICRO TANK PLA 1U MICRO TANK 250 1 OUTPUTS 8P. C MICRO TANK 250 2 OUTPUTS MICRO TANK 250 2 OUTPUTS 8P. C MICRO JOINT SLEEVE L.1110 MICRO JOINT SLEEVE MICRO JOINT SLEEVE L.440 MICRO JOINT SLEEVE L.690 MICRO JOINT SLEEVE L.1620 MICRO JOINT SLEEVE L.250 MICRO SUPPORT PIPE L.1170 MICRO BAR SUPPORT NO SPREADER UMOSTART DISTRIBUTOR CHART STI

RESERVOIR MICRO PLA 1U COMPL. RESERV. MICRO 250 1 SORT. 8P. RESERVOIR MICRO 250 2 SORTIES RESERV. MICRO 250 2 SORT. 8P. MANCHON RACCORD MICRO L. 1110 MANCHON RACCORD MICRO L. 550 MANCHON RACCORD MICRO L. 440 MANCHON RACCORD MICRO L. 690 MANCHON RACCORD MICRO L. 1620 MANCHON RACCORD MICRO L. 250 TUBE SUPPORT MICRO L1170 SUPP. BARRE MICRO SANS FERTILI DECALC. TABLEAU DISTRIBUTEUR U

DEPOSITO MICRO PLA 1U COMPL. DEPSITO MICRO 250 1 SALIDAS 8P DEPSITO MICRO 250 2 SALIDAS B DEPSITO MICRO 250 2 SALIDAS 8P MANGUITO DE UNIN MICRO L.1110M MANGUITO DE UNIN MICRO L.550 M MANGUITO DE UNIN MICRO L.440 M MANGUITO DE UNIN MICRO L.690 M MANGUITO DE UNIN MICRO L.1620M MANGUITO DE UNIN MICRO L.250 M TUBO SOPORTE MICRO L1170 SOPORTE BARRA MICRO SIN ABONAD CAL.TABLA DISTRIBUDOR UMOSTART

cod. G19530265

Benennung

BEH-LTER MIKROGRANULAT PLASTIK MIKROGRANULATBEH. 250 1AUSG. 8 MIKROGRANULATBEHZLTER 250 2 AU MIKROGRANULATBEH. 250 2AUSG. 8 VERBINDUNGSMUFFE MIKRO L1110 VERBINDUNGSMUFFE MIKRO L 550 VERBINDUNGSMUFFE MIKRO L.440 VERBINDUNGSMUFFE MIKRO L.690 VERBINDUNGSMUFFE MIKRO L.1620 VERBINDUNGSMUFFE MIKRO L.250 ROHR HALTERUNG MIKRO L.1170 SPINDELHALTERUNG MIKRO OHNE ST ABZIEHB. TABELLE SZAPPARAT UMO

Descripcion

TAV. 214 25 35

10 21

5 34 43 4 40 8

11 15

35 38 31

27 32 16

24 34

18 1

32 31

45 13

32 46

39 28

46 26 32 22

42 22

23 3

47 - L. 1000 48 - L. 800 49 - L. 1200

cod. G19530265

TRASMISSIONE SPANDICONCIME PLASTICA E MICROGRANULATORE Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49

G14830390 G15470381 G15470851 G15475031 G15475041 G15475260 G15475310 G18902960 G19000091 G19002810 G19002820 G19002830 G19002880 F01200306 G20890128 G20970032 G20980086 G22230094 G22250007 G22250028 F20110706 G22505085 F01060048 F01020075 F01020083 F01020235 F01020403 F01020432 F01020436 F01070078 F01200232 F01200244 F01200270 F01410037 F01410051 G18701140 F01420011 F01430047 F01430059 F01100011 F06080068 F06080025 G66248152 G66248207 G66248218 F01420048 G22230138 G22230142 G22270049

TAV. 214

MTE

Descrizione

Description

Benennung

Descripcion

CUSCINETTO FORO QUADRO SUPPORTO RINVIO TUBO 150 FIANCO SUPP.TRASM.SPANDI SUPPORTO TRASMISSIONE SX SUPPORTO TRASMISSIONE DX SCONTRO SP SUPPORTO RULLINI TENDIC. MICRO MOLLA TRAZ.TRASM.RUOTA ZN ROCCHETTO 2 META' CARTER RINVIO MICRO DX CARTER RINVIO MICRO SX CARTER TRASMISSIONE SUPERIORE CARTER INFERIORE TRASM.SPAND. DADO 14 5588 6.8 ZN CORONA Z-42 SP RONDELLA 32X4X8,5 BOCCOLA DIST.D.8,5X16X31 SUPPORTO CUSCINETTO INGR.CON MOZZO 1/2 Z-20 SV PIGNONE Z-15 SV CAV.Q.M10X 1,5X 30 47X 60 ZG FERMO ASSE IN LAMIERA BUL.M 8X1,25X 50 U5732 4.6 ZG VITE M8X1,25X 55 U5737 8.8 ZG VITE M 8X1,25X70 U5737 8.8 ZG VITE M14X 2X220 U5737 8.8 ZG VITE 6 X16 5739 8.G ZN VITE 8 X16 5739 8.G ZN VITE 8 X20 5739 8.G ZN VIT.A.4,2X1,41X 9,5 6950 4.8ZG DADO M 6X 1 U5588 6.8 ZG DADO M 8X1,25 U5588 6.8 ZG DADO 10 5588 6.8 ZN ROS.M6 6,4X12,5X1,6 U6592 ZG ROS.M8 8,4X 17X1,6 U6592 ZG RONDELLA 11 X35 X5 ROS.M4 4,3X 16X 1 U6593 ZG ROS.M6 6,4X 11X0,7 U8842J ZG ROS.M8 8,4X 15X0,8 U8842J ZG ING.M 6X1 7663-A 9SMNPB28 ZG CATENA 1/2 ISO 083 126 MAGLIE CATENA 1/2 ISO 083 56 MAGLIE MOZZO TRASM.MICRO M80 TENDICATENA SPAND. SP-520 RONDELLA DISTAN.SPAND. ROND.PIANA 9X 24X2 6593 ZN ASSE CAMBIO 4F.80-6F.45 L.1000 ASSE 4 FILE L.800 ASSE 4F.85-6F.50 L.1260

SQUARE-HOLED BEARING TRANSM. SUPPORT FOR PIPE 150 SPREADER TRANSM. SIDE SUPPORT LEFT TRANSMISSION SUPPORT RIGHT TRANSMISSION SUPPORT STRIKER PLATE SP MICRO CHAIN STRETCHER ROLLERS TRANSMISSION TENSIONER SPRING CHAIN TENSIONER RIGHT MICRO TRANSM. CASE LEFT MICRO TRANSM. CASE TOP TRANSMISSION CASE BOTTOM SPREADER TRANSM. CASE NUT M14X2 RING GEAR Z-42 SP WASHER 32X4X8-5 BUSHING SPAC.. D.8-5X16X31 BEARING SUPPORT GEARS- W/ HUB 1/2 Z-20 SV Z-15 PINION SV DISK SUPPORT.ELEMENT U BOLT SV PLATE AXLE STOP BOLT 8 X50 5732 4.6 GALVANIZ. BOLT 8 X55 5737 8.8 GALVANIZED BOLT M 8X70 BOLT M14X 2X220 U5737 8.8 ZG BOLT M 6X16 BOLT M 8X16 BOLT M 8X20 SELFTHREADING BOLT 4,2X13 TE NUT 6 UNI 5588 6.8 GALVANIZED NUT M8 NUT M10 PLANE WASHER D.6 PLANE WASHER D.8 WASHER 11 X 35 X 5 FLAT WASHER 4-3X 16X1-5 6593 G WASHER D6 DIN 6798 D.INT.GALV. WASHER D8 DIN 6798 D.INT.ZN SPHERE NIPPLE M6X1/A CUT-DOWN CHAIN 1/2 ISO 083 126 CHAIN 1/2-3/16 56 LINKS. HUB - TRANSM. MICRO M80 CHAIN TENSIONER MAN. SPR. SPACER WASHER PLANE WASHER D.8 GEAR SPINDLE 4-ROW 80- 6-ROW.4 4-ROW SPINDLE L.800 4-ROW SPINDLE - 85-6-ROW-50 L.

ROULEMENT AL+SAGE CARR+ SUPPORT RENVOI POUR TUBE 150 COTE SUPPORT TRANSM. EPAND. SUPPORT ENTRAINEMENT GCH SUPPORT ENTRAINEMENT DRT BUTEE SP SUPP. ROUETS TEND. CHAINE MICR RESSORT TRACT. ENTRAIN. ROUE Z TENDEUR DE CHAINE 2 MOITIE CARTER TRANSM. MICRO DRT CARTER TRANSM. MICRO GCH CARTER ENTRAINEMENT SUPERIEUR CARTER INFERIEUR TRANSM EPAND. ECROU M14X2 COURONNE Z-42 SP RONDELLE 32X4X8-5 BOITE ENTRETOISE D. 8-5X16X31 SUPPORT PALIER ENGRENAGE 1/2 Z-20 PIGNON Z-15 SV CAVALIER SUPPORT DISQUE SV ARRET AXE EN TOLE VIS 8 X50 5732 4.6 ZN VIS 8 X55 5737 8.8 ZN VIS M 8X70 VIS M14X 2X220 U5737 8.8 ZG VIS M 6X16 VIS M 8X16 VIS M 8X20 VIS AUTOTARADEUSE.4-2X13 TE ECROU 6 UNI 5588 6.8 ZN ECROU M8 ECROU M10 RONDELLE D.6 RONDELLE D.8 RONDELLE 11 X35 X5 ROND.PLATE 4-3X 16X1-5 6593 ZN RONDELLE D6 DIN 6798 D. INT. Z RONDELLE D8 DIN 6798 D. INT. Z GRAISSEUR A BILLES M6X1/A TRONCON CHAINE 1/2 ISO 083 126 CHAINE 1/2-3/16 56 MAILLES MOYEU ENTRAINEMENT MICRO M80 TENDEUR DE CHAINE EPAND. ENGR. RONDELLE ENTRETOISE EP. ENGRAI RONDELLE D.8 AXE BOITE DE VITESSE 4 RA AXE 4 RANGEES L. 800 AXE 4 RANGEES 85-6 RANGEES 50

VIERKANTLAGER HALTERUNG VORGELEGE ROHR 150 SEITEN HALTER. ANTRIEB DUNGERS HALTERUNG GETRIEBE LI HALTERUNG GETRIEBE RE ANSCHLAG STREUER HALTERUNG KETTENSPANNROLLEN ZUGFEDER RADANTRIEB ZN KLEINRAD SPANNER SA VORGELEGEGEHZUSE MIKRO RE VORGELEGEGEHZUSE MIKRO LI OBERES ANTRIEBSGEHZUSE UNTER. ANTRIEBSGEHZUSE DsNG.GE MUTTER M14X2 KRANZ Z-42 SP UNTERLEGSCHEIBE 32X4X8-5 VERTEILERBsCHSE D.8-5X16X31 LAGERBsCHSE ZAHNRAD MIT NABE 1/2 Z-20 SV RITZEL Z-15 SV VERBINDUNG SCHEIBENHALTERUNG S FESTSTELLVORRICHTUNG BLECHACHS SCHRAUBE 8 X50 5732 4.6 ZN SCHRAUBE 8 X55 5737 8.8 ZN SCHRAUBE M 8X70 SCHRAUBE M14X 2X220 U5737 8. SCHRAUBE M 6X16 SCHRAUBE M 8X16 SCHRAUBE M 8X20 SELBSTSCHNEID. SCHRAUBE 4-2X13 MUTTER 6 UNI 5588 6.8 ZN MUTTER M8 MUTTER M10 SCHEIBE D.6 SCHEIBE D.8 UNTERLEGSCHEIBE 11 X35 X5 SCHEIBE 4-3X 16X1-5 6593 ZN UNT. SCHEIBE D6 DIN 6798 D. IN UNT. SCHEIBE D8 DIN 6798 D. IN KUGELFETTBsCHSE M6X1/A KETTENLZNGE ISO 083 126 GLIED KETTE 1/2-3/16 56 GLIEDER ANTRIEBSNABE MIKRO M80 KETTENSPANNER DsNGERSTR. SP-52 ABSTANDSCHEIBE DsNGERSTREUER SCHEIBE D.8 GETRIEBEACHSE 4 R. 80-6 R.45 L ACHSE 4 REIHEN B. 800 ACHSE 4 REIHEN 85-6 REIH. 50

COJINETE ORIFICIO CUADRADO SOPORTE TRANSMISION TUBO 150 COSTADO SOPORTE TRANSM. ABONAD SOPORTE TRANSMISIN IZQ S SOPORTE TRANSMISIN DER S ELEMENTO DE EMPALME SP SOP. RODILLOS TENSOR CADENA MI MUELLE TRAC. TRANSM.RUEDA ZN CARRETE TENSOR SA CæRTER TRANSMISIN MICRO DER C CæRTER TRANSMISIN MICRO IZQ C CæRTER TRANSMISIN SUPERIOR C CæRTER INFER. TRANSMISIN ABONC DADO M14X2 CORONA Z-42 SP ARANDELA 32X4X8-5 CASQUILLO DIST. D.8-5X16X31 SOPORTE COJINETE ENGRAN.CON PERNO 1/2 Z-20 SV PI¾N Z-15 SV P PERNO EN U SOP. DISCO SV BLOQUEO EJE DE CHAPA TORNILLO 8x50 5732 4 6 ZN TORNILLO 8 X55 5737 8.8 ZN TORNILLO M 8X70 TORNIL. M14X 2X220 U5737 8.8 TORNILLO M 6X16 TORNILLO M 8X16 TORNILLO M 8X20 TORNILLO AUTOR.4-2X13 TE TUERCA 6 UNI 5588 6.8 ZN DADO M8 DADO M10 ARANDELA D.6 ARANDELA D.8 ARANDELA 11 X35 X5 ARAND. PLANA 4-3X 16X1-5 6593 ARANDELA D6 DIN 6798 D.INT.ZN ARANDELA D8 DIN 6798 D.INT.ZN ENGRAS. DE ESFERAS M6X1/A TRECHO CADENA 1/2 ISO 083 126 CADENA 1/2-3/16 56 ESLABNE CUBO TRANSM. MICRO M80 TENSOR DE CADENA ABON. SP-520 ARANDELA DISTAN.ABONAD. ARANDELA D.8 EJE CAMBIO 4 FILAS. 80-6 FILAS EJE 4 FILAS L.800 EJE 4 FILAS. 85-6 FILAS. 50 L.

cod. G19530265

TAV. 224 54 36

29 2 25

28 32

22 53 21

33 5

10 34

43 19

4 40

38 31

44 14 36

51 29

32 46

29 46 23

23 9

59 32 1

24 31

50 34

30 37

26 - Z13

41 Z10 - 20

47 - L. 1000 52 - L. 800 58 - L. 1260

22 45

cod. G19530265

TRASMISSIONE SPANDICONCIME PLASTICA/BBP E MICROGRANULATORE Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62

G14830390 G15175070 G15470851 G15475031 G15475041 G15475260 G15475310 G18902960 G19000091 G19002810 G19002820 G19002830 G19002880 G18801680 G20890128 G20970032 G20980086 G22230094 G22250047 G22250006 F20110706 G22505085 F01060048 F01020075 F01020083 G22505085 F01020403 G22500150 F01020436 F01070078 F01200232 F01200244 F01200270 F01410037 F01410051 G18701140 F01420011 F01430047 F01430059 F01100011 F06080070 F06080030 G66248152 G66248207 G66248218 F01420048 G22230138 F04010310 G22500091 F02050621 G22500092 G22230142 G14270420 F02200162 G22270049 F01220011 G22500102 F01020404 G15231410 G15171860 G22250044 G20860086

TAV. 224

MTE300

Descrizione

Description

Benennung

Descripcion

CUSCINETTO FORO QUADRO SUPPORTO ASSI TRASM.MICRO FIANCO SUPP.TRASM.SPANDI SUPPORTO TRASMISSIONE SX SUPPORTO TRASMISSIONE DX SCONTRO SP SUPPORTO RULLINI TENDIC. MICRO MOLLA TRAZ.TRASM.RUOTA ZN ROCCHETTO 2 META' CARTER RINVIO MICRO DX CARTER RINVIO MICRO SX CARTER TRASMISSIONE SUPERIORE CARTER INFERIORE TRASM.SPAND. BOCCOLA 11 X25 X7,5 ZN CORONA Z-42 SP RONDELLA 32X4X8,5 BOCCOLA DIST.D.8,5X16X31 SUPPORTO CUSCINETTO CORONA CAMBIO Z-20 SV INGR.CON MOZZO 1/2 Z-10 SV CAV.Q.M10X 1,5X 30 47X 60 ZG FERMO ASSE IN LAMIERA BUL.M 8X1,25X 50 U5732 4.6 ZG VITE M8X1,25X 55 U5737 8.8 ZG VITE M 8X1,25X70 U5737 8.8 ZG FERMO ASSE IN LAMIERA VITE 6 X16 5739 8.G ZN ASSE CAVO DA 20 MICRO MT.0,48 VITE 8 X20 5739 8.G ZN VIT.A.4,2X1,41X 9,5 6950 4.8ZG DADO M 6X 1 U5588 6.8 ZG DADO M 8X1,25 U5588 6.8 ZG DADO 10 5588 6.8 ZN ROS.M6 6,4X12,5X1,6 U6592 ZG ROS.M8 8,4X 17X1,6 U6592 ZG RONDELLA 11 X35 X5 ROS.M4 4,3X 16X 1 U6593 ZG ROS.M6 6,4X 11X0,7 U8842J ZG ROS.M8 8,4X 15X0,8 U8842J ZG ING.M 6X1 7663-A 9SMNPB28 ZG CATENA 1/2 ISO 083 129 MAGLIE CATENA 1/2 ISO 083 62 MAGLIE MOZZO TRASM.MICRO M80 TENDICATENA SPAND. SP-520 RONDELLA DISTAN.SPAND. ROND.PIANA 9X 24X2 6593 ZN ASSE CAMBIO 4F.80-6F.45 L.1000 CUSCINETTO 61907-2RZ BOCCOLA CUSCINETTO ANELLO ARR.35 UNI 7435-75 SUPPORTO CUSCINETTO ASSE 4 FILE L.800 MANICOTTO MICRO LATER.L.635 COPIGLIA 3X 20 U1336 ZG ASSE 4F.85-6F.50 L.1260 DADO M 6X 1 D980 8 ZG FERMO ASSI VITE M 6X 1X20 U5739 8.8 ZG DISTANZIALE INTERNO ZN DISTANZIALE CORONA CAMBIO Z-17 SV INGRANAGGIO 1/2 Z-12 F.Q.

SQUARE-HOLED BEARING MICRO TRANSMISSION AXIS SUPPOR SPREADER TRANSM. SIDE SUPPORT LEFT TRANSMISSION SUPPORT RIGHT TRANSMISSION SUPPORT STRIKER PLATE SP MICRO CHAIN STRETCHER ROLLERS TRANSMISSION TENSIONER SPRING CHAIN TENSIONER RIGHT MICRO TRANSM. CASE LEFT MICRO TRANSM. CASE TOP TRANSMISSION CASE BOTTOM SPREADER TRANSM. CASE BUSHING 11X25X7,5 GALVA RING GEAR Z-42 SP WASHER 32X4X8-5 BUSHING SPAC.. D.8-5X16X31 BEARING SUPPORT GEARBOX RING GEAR Z-20 SV GEARS- W/ HUB 1/2 Z-10 SV DISK SUPPORT.ELEMENT U BOLT SV PLATE AXLE STOP BOLT 8 X50 5732 4.6 GALVANIZ. BOLT 8 X55 5737 8.8 GALVANIZED BOLT M 8X70 PLATE AXLE STOP BOLT M 6X16 SPINDLE - MICRO 20 CABLE MT.0. BOLT M 8X20 SELFTHREADING BOLT 4,2X13 TE NUT 6 UNI 5588 6.8 GALVANIZED NUT M8 NUT M10 PLANE WASHER D.6 PLANE WASHER D.8 WASHER 11 X 35 X 5 FLAT WASHER 4-3X 16X1-5 6593 G WASHER D6 DIN 6798 D.INT.GALV. WASHER D8 DIN 6798 D.INT.ZN SPHERE NIPPLE M6X1/A CHAIN SECTION 1/2-3/16 129 ME CUT-DOWN CHAIN .1/2 ISO 083 62 HUB - TRANSM. MICRO M80 CHAIN TENSIONER MAN. SPR. SPACER WASHER PLANE WASHER D.8 GEAR SPINDLE 4-ROW 80- 6-ROW.4 BEARING 61907-2RZ BEARING BUSHING STOP RING 35 UNI 7435-75 BEARING SUPPORT 4-ROW SPINDLE L.800 MICRO SLEEVE L.635 SPLIT PIN 3 X20 1336 GALVAN. 4-ROW SPINDLE - 85-6-ROW-50 L. SELF LOCKING NUT M6 AXLE STOP BOLT 6X20 5739 8.G GALVANIZED INNER SPACER SPACER GEARBOX RING GEAR Z-17 SV GEAR 1/2 Z-12 F.Q.

ROULEMENT AL+SAGE CARR+ SUPP. AXE TRANSMISSION MICRO COTE SUPPORT TRANSM. EPAND. SUPPORT ENTRAINEMENT GCH SUPPORT ENTRAINEMENT DRT BUTEE SP SUPP. ROUETS TEND. CHAINE MICR RESSORT TRACT. ENTRAIN. ROUE Z TENDEUR DE CHAINE 2 MOITIE CARTER TRANSM. MICRO DRT CARTER TRANSM. MICRO GCH CARTER ENTRAINEMENT SUPERIEUR CARTER INFERIEUR TRANSM EPAND. BOITE 11X25X7,5 ZN COURONNE Z-42 SP RONDELLE 32X4X8-5 BOITE ENTRETOISE D. 8-5X16X31 SUPPORT PALIER COURONNE BOITE DE VITESSE ENGRENAGE AVEC MOYEU 1/2 Z-10 CAVALIER SUPPORT DISQUE SV ARRET AXE EN TOLE VIS 8 X50 5732 4.6 ZN VIS 8 X55 5737 8.8 ZN VIS M 8X70 ARRET AXE EN TOLE VIS M 6X16 AXE CABLE DE 20 MICRO M. 0-48 VIS M 8X20 VIS AUTOTARADEUSE.4-2X13 TE ECROU 6 UNI 5588 6.8 ZN ECROU M8 ECROU M10 RONDELLE D.6 RONDELLE D.8 RONDELLE 11 X35 X5 ROND.PLATE 4-3X 16X1-5 6593 ZN RONDELLE D6 DIN 6798 D. INT. Z RONDELLE D8 DIN 6798 D. INT. Z GRAISSEUR A BILLES M6X1/A TRONÃON CHA+NE 1/2-3/16 129 MA TR. CH.1/2 ISO 083 62 MAILLES MOYEU ENTRAINEMENT MICRO M80 TENDEUR DE CHAINE EPAND. ENGR. RONDELLE ENTRETOISE EP. ENGRAI RONDELLE D.8 AXE BOITE DE VITESSE 4 RA PALIER 61907-2RZ BOITE PALIER BAGUE ARRET 35 UNI 7435-75 SUPPORT PALIER AXE 4 RANGEES L. 800 MANCHON MICRO L.635 GOUPILLE 3 X20 1336 ZN AXE 4 RANGEES 85-6 RANGEES 50 ECROU AUTOBL. M6 ARRET AXES VIS 6X20 5739 8.G ZN ENTRETOISE INT. ENTRETOISE COURONNE BOITE DE VITESSE ENGRENAGE 1/2 Z-12 TROUS CARRE

VIERKANTLAGER HALTERUNG ACHSEN ANTRIEB MIKRO SEITEN HALTER. ANTRIEB DUNGERS HALTERUNG GETRIEBE LI HALTERUNG GETRIEBE RE ANSCHLAG STREUER HALTERUNG KETTENSPANNROLLEN ZUGFEDER RADANTRIEB ZN KLEINRAD SPANNER SA VORGELEGEGEHZUSE MIKRO RE VORGELEGEGEHZUSE MIKRO LI OBERES ANTRIEBSGEHZUSE UNTER. ANTRIEBSGEHZUSE DsNG.GE BsCHSE 11X25X7,5 ZN KRANZ Z-42 SP UNTERLEGSCHEIBE 32X4X8-5 VERTEILERBsCHSE D.8-5X16X31 LAGERBsCHSE GETRIEBEKRANZ Z-20 SV ZAHNRAD MIT NABE 1/2 Z-10 SV VERBINDUNG SCHEIBENHALTERUNG S FESTSTELLVORRICHTUNG BLECHACHS SCHRAUBE 8 X50 5732 4.6 ZN SCHRAUBE 8 X55 5737 8.8 ZN SCHRAUBE M 8X70 FESTSTELLVORRICHTUNG BLECHACHS SCHRAUBE M 6X16 KABELACHSE 20 MIKRO M 0-48 SCHRAUBE M 8X20 SELBSTSCHNEID. SCHRAUBE 4-2X13 MUTTER 6 UNI 5588 6.8 ZN MUTTER M8 MUTTER M10 SCHEIBE D.6 SCHEIBE D.8 UNTERLEGSCHEIBE 11 X35 X5 SCHEIBE 4-3X 16X1-5 6593 ZN UNT. SCHEIBE D6 DIN 6798 D. IN UNT. SCHEIBE D8 DIN 6798 D. IN KUGELFETTBsCHSE M6X1/A KET.ABSCHN.1/2-3/16 129 GLIEDE KETTENLZNGE 1/2 ISO 083 62 GL ANTRIEBSNABE MIKRO M80 KETTENSPANNER DsNGERSTR. SP-52 ABSTANDSCHEIBE DsNGERSTREUER SCHEIBE D.8 GETRIEBEACHSE 4 R. 80-6 R.45 L LAGER 61907-2RZ LAGERBsCHSE RING 35 UNI 7435-75 LAGERBsCHSE ACHSE 4 REIHEN B. 800 MUFFE MIKRO L.635 SPLINT 3 X20 1336 ZN ACHSE 4 REIHEN 85-6 REIH. 50 SELBSTSPERR.MUTTER M6 FESTSTELLVORRICHTUNG ACHSEN SCHRAUBE 6X20 5739 8.G ZN INNERES DISTANZST_CK DISTANZST_CK GETRIEBEKRANZ Z-17 SV ZAHNRAD 1/2 Z-12 F.Q.

COJINETE ORIFICIO CUADRADO SOPORTE EJES TRANMISION MICRO COSTADO SOPORTE TRANSM. ABONAD SOPORTE TRANSMISIN IZQ S SOPORTE TRANSMISIN DER S ELEMENTO DE EMPALME SP SOP. RODILLOS TENSOR CADENA MI MUELLE TRAC. TRANSM.RUEDA ZN CARRETE TENSOR SA CæRTER TRANSMISIN MICRO DER C CæRTER TRANSMISIN MICRO IZQ C CæRTER TRANSMISIN SUPERIOR C CæRTER INFER. TRANSMISIN ABONC CASQUILLO 11X25X7,5 ZN CORONA Z-42 SP ARANDELA 32X4X8-5 CASQUILLO DIST. D.8-5X16X31 SOPORTE COJINETE CORONA CAMBIO Z-20 SV ENGRAN.CON PERNO 1/2 Z-10 SV PERNO EN U SOP. DISCO SV BLOQUEO EJE DE CHAPA TORNILLO 8x50 5732 4 6 ZN TORNILLO 8 X55 5737 8.8 ZN TORNILLO M 8X70 BLOQUEO EJE DE CHAPA TORNILLO M 6X16 EJE CABLE DE 20 MICRO MT.0-48 TORNILLO M 8X20 TORNILLO AUTOR.4-2X13 TE TUERCA 6 UNI 5588 6.8 ZN DADO M8 DADO M10 ARANDELA D.6 ARANDELA D.8 ARANDELA 11 X35 X5 ARAND. PLANA 4-3X 16X1-5 6593 ARANDELA D6 DIN 6798 D.INT.ZN ARANDELA D8 DIN 6798 D.INT.ZN ENGRAS. DE ESFERAS M6X1/A TRAMO CAD.1/2-3/16 129 ESLABON TRECHO CADENA 1/2 ISO 083 62 E CUBO TRANSM. MICRO M80 TENSOR DE CADENA ABON. SP-520 ARANDELA DISTAN.ABONAD. ARANDELA D.8 EJE CAMBIO 4 FILAS. 80-6 FILAS COJINETE 61907-2RZ CASQUILLO COJINETE ANILLO PARADA 35 UNI 7435-75 SOPORTE COJINETE EJE 4 FILAS L.800 MANGUITO MICRO L.635 PASADOR 3 X20 1336 ZN EJE 4 FILAS. 85-6 FILAS. 50 L. DADO AUTOBL. M6 BLOQUEO EJES TORNILLO 6X20 5739 8.G ZN DISTANCIADOR INTERIOR DISTANCIADOR CORONA CAMBIO Z-17 SV ENGRANAJE 1/2 Z-12 F.Q.

cod. G19530265

TAV. 370

nr. 20

1 - Umostart 20p. 41 - Lumachicida 20p.

nr. 8

39 - Umostart 8p. 40 - Lumachicida 8p. 3

15 14 19

34 12

26 16

4 17

27 7

8 9

30 36

32 33

34 18

23 24 25

30 26 27

6 28

cod. G19530265

TAV. 370

APPLICAZIONE DOPPIO MICROGRANULATORE Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41

G19704980 G15274600 G15274610 G15274621 G15273061 G15273051 G22250028 G66248218 G22505085 F06080047 F01020470 F02200452 G65336084 F01410037 F01020403 F01020472 F01200270 G15273041 F02250680 F01060047 G15274640 F02200163 F02050613 G22250441 F04010134 G22230094 F01020432 F02050615 G22250190 G65338022 F01410064 G66248207 F01420048 F01200244 G14830390 G11425111 F02300016 G65336041 G19704970 G19704990 G19705000

Descrizione

Description

Benennung

Descripcion

DECAL.TAB.DISTRIB.UMOSTART 20P SUPPORTO SX LUMACHICIDA SUPPORTO DX LUMACHICIDA ATTACCO SUPPORTO CATENA TRASMISSIONE LUMACHICIDA COMPL CARTER SUPPORTO CATENA PIGNONE Z-15 SV RONDELLA DISTAN.SPAND. FERMO ASSE IN LAMIERA CATENA 1/2 ISO 083 88 MAGLIE VITE M10X 1,5X20 U5739 8.8 ZG SPINA A SCATTO D.4,4 B/80 MOLLA SPEC.ZN AGITAT.DISTR.SV ROS.M6 6,4X12,5X1,6 U6592 ZG VITE 6 X16 5739 8.G ZN VITE M10X 1,5X25 U5739 8.8 ZG DADO 10 5588 6.8 ZN SUPPORTO CATENA INSERTO FILETTATO M 6 X13 ZN BUL.M 8X1,25X 45 U5732 4.6 ZG MANICOTTO DISGIUNTORE COPIGLIA 3X 25 U1336 ZG ANELLO ARR.25 UNI 7435-75 MOZZO CORONA SEMINATORE SV/2 CUSCINETTO 6005 2Z SUPPORTO CUSCINETTO VITE 8 X16 5739 8.G ZN ANELLO ARR.28 UNI 7435-75 CORONA ASSE SEMINAT.Z-15 SV MOLLA COMP.ZN CHIAVISTELLO FR ROS.M10 10,5X 20X 2 U6592 ZG TENDICATENA SPAND. SP-520 ROND.PIANA 9X 24X2 6593 ZN DADO M 8X1,25 U5588 6.8 ZG CUSCINETTO FORO QUADRO TUBO DISCESA LUMACHICIDA COMPL FASCETTA STRING.16/27 MOLLA SPEC.ZN STRINGITUBO M80 DECAL.TAB.DISTRIB.UMOSTART 8P. DECAL.TAB.DISTRIB.LUMACHIC.8P. DECAL.TAB.DISTRIB.LUMACHIC.20P

UMOSTART DISTRIBUTOR CHART 20P LEFT SUPPORT RIGHT SUPPORT CHAIN SUPPORT COUPLING COMPL. TRANSMISSION SUPPORT CHAIN CASING Z-15 PINION SV MAN. SPR. SPACER WASHER PLATE AXLE STOP CUT-DOWN CHAIN 1/2 ISO 083 88 BOLT M 10X20 SNAP PIN D.4-4 B/80 SPEC SPRINGZN DISTR. STIRRER . PLANE WASHER D.6 BOLT M 6X16 BOLT 10X25 5739 8.G GALVANIZED NUT M10 CHAIN SUPPORT THREADED INSERT M6X13 ZN BOLT 8X45 5732 4.6 GALVANIZED UNCOUPLING SLEEVE

TABLEAU DISTRIBUTEUR UMOSTART SUPPORT GCH SUPPORT DRT FIXATION SUPPORT CHAINE TRANSMISSION COMPL. CARTER SUPPORT CHAiNE PIGNON Z-15 SV RONDELLE ENTRETOISE EP. ENGRAI ARRET AXE EN TOLE TR. CH. ® ISO 083 88 MAILLES VIS M 10X20 FICHE A DETENTE D. 4-4 B/80 RESSORT SPEC. ZN AGITATEUR DIS RONDELLE D.6 VIS M 6X16 VIS 10X25 5739 8.G ZN ECROU M10 SUPPORT CHAINE PIECE INTERC.FILETEE M 6X13ZN VIS 8X45 5732 4.6 ZN MANCHON DEBRAYAGE

TABELLE SZAPPARAT UMOSTART 20P HALTERUNG LI HALTERUNG RE KUPPLUNG HALTERUNG ANTRIEB KOMPL. KETTENHALTERUNGSGEHZUSE RITZEL Z-15 SV ABSTANDSCHEIBE DsNGERSTREUER FESTSTELLVORRICHTUNG BLECHACHS KETTENLZNGE 1/2 ISO 083 88 GL SCHRAUBE M 10X20 EINRASTSTIFT D 4-4 B/80 SPEZIALFEDER ZN SAMENMISCHER S SCHEIBE D.6 SCHRAUBE M 6X16 SCHRAUBE 10X25 5739 8.G ZN MUTTER M10 KETTE HALTERUNG GEWINDEEINSATZ M 6 X 13 ZN SCHRAUBE 8X45 5732 4.6 ZN MUFFE AUSKUPPLUNG

TABLA DISTRIBUDOR UMOSTART 20P SOPORTE IZQ SOPORTE DER CONEXIN SOPORTE CADENA TRANSMISION COMPL CARTER SOPORTE CADENA PI¾N Z-15 SV P ARANDELA DISTAN.ABONAD. BLOQUEO EJE DE CHAPA CADENA 1/2 ISO 083 88 ESLABONE TORNILLO M 10X20 CLAVIJA DE MUELLE D.4-4 B/80 MUELLE ESPEC. ZN AGITAD. DISTR ARANDELA D.6 TORNILLO M 6X16 TORNILLO 10X25 5739 8.G ZN DADO M10 SOPORTE CADENA ENCASTRE ROSCADO M 6 X13 ZN TORNILLO 8X45 5732 4.6 ZN MANGUITO DESCONEXIËN

STOP RING 25 UNI 7435-75 PLANTING UNIT CROWN HUB SV/2 BEARING 6005 2Z BEARING SUPPORT BOLT M 8X16 STOP RING 28 UNI 7435-75 PLANTING UNIT AXLE Z-15 RING G ZN LATCH COMP. SPRING FR WASHER 10,5X21 CHAIN TENSIONER PLANE WASHER D.8 NUT M8 SQUARE-HOLED BEARING PIPE DESCENT STRING FASTENING STRAPS .16/27 SPEC.SPRING ZN . PIPE CLAMP M8 UMOSTART DISTRIBUTOR CHART 8P DISTRIBUTOR CHART 8P DISTRIBUTOR CHART 20P

BAGUE DE SERRAGE 25 UNI 7435-7 MOYEU COURONNE SEMEUR SV/2 PALIER 6005 2Z SUPPORT PALIER VIS M 8X16 BAGUE DE SERRAGE 28 UNI 7435-7 COURONNE AXE SEMEUR Z-15 SV RESSORT COMPL. ZN VERROU FR RONDELLE 10,5X21 TENDEUR DE CHAINE EPAND. ENGR. RONDELLE D.8 ECROU M8 ROULEMENT AL+SAGE CARR+ TUBE DESCENTE COMPL. COLLIER DE SERRAGE 16/27 L RESSORT SPEC. ZN SERRE-TUBE M8 TABLEAU DISTRIBUTEUR UMOSTART TABLEAU DISTRIBUTEUR 8P TABLEAU DISTRIBUTEUR 20P

DRAHTSPRENGRING 25 UNI 7435-75 KRANZNABE SZELEMENT SV/2 LAGER 6005 2Z LAGERBsCHSE SCHRAUBE M 8X16 DRAHTSPRENGRING 28 UNI 7435-75 KRANZ SZELEMENTACHSE Z-15 SV DRUCKFEDER ZN RIEGEL FR SCHEIBE 10,5X21 KETTENSPANNER DsNGERSTR. SP-52 SCHEIBE D.8 MUTTER M8 VIERKANTLAGER SENKROHR KOMPL. ROHRSCHELLE .16/27 L SPEZIALFEDER ZN ROHRSCHELLE M8 TABELLE SZAPPARAT UMOSTART 8P TABELLE SZAPPARAT 8P TABELLE SZAPPARAT 20P

ANILLO PARADA 25 UNI 7435-75 CUBO CORONA SEMBRADOR SV/2 COJINETE 6005 2Z SOPORTE COJINETE TORNILLO M 8X16 ANILLO PARADA 28 UNI 7435-75 CORONA EJE SEMBR. Z-15 SV MUELLE COMP.ZN PESTILLO FR ARANDELA 10,5X21 TENSOR DE CADENA ABON. SP-520 ARANDELA D.8 DADO M8 COJINETE ORIFICIO CUADRADO TUBO DESCENSO COMPL. ABRAZADERA APRET.16/27 L MUELLE ESPEC. ZN APLASTA TUBOS TABLA DISTRIBUDOR UMOSTART 8P TABLA DISTRIBUDOR 8P TABLA DISTRIBUDOR 20P

cod. G19530265

TAV. 251 10 1 6 17 15 11

4 19 2

7 8

7 12

16 3 18 19

5 Rosso Gaspardo - 1Kg Gaspardo red - 1Kg Rot Gaspardo - 1Kg Rouge Gaspardo - 1Kg Rojo Gaspardo - 1Kg

13 DECALCOMANIE AVVERTIMENTO DECAL DBZIEHBILD DECALCOMANIE CALCOMANIE CALCOMANIE

MTE

cod. G19530265

TAV. 251

ACCESSORI Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

F01200232 G15211760 G13616620 G13616570 F03200244 F01020403 F01220011 F01410037 F05010221 F05010357 F05010076 F05010080 G89900500 G89900511 F01090215 F01410037 G15412650 F01420036 F01020408

Descrizione

Description

Benennung

Descripcion

DADO M 6X 1 U5588 6.8 ZG SUPPORTO LUCI POST. KIT LUCI PER MACCHINE PORTATE PIASTRA SUPP.LUCI ROSSO GASPARDO BARATTOLO KG 1 VITE 6 X16 5739 8.G ZN DADO M 6X 1 D980 8 ZG ROS.M6 6,4X12,5X1,6 U6592 ZG CATARIFRANGENTE TONDO D.80 > N.2 PANNELLI CARICHI SPORGENTI FANALE X KIT LUCI CABLAGGIO PER KIT LUCI KIT DECALCOMANIE -CEKIT DECALCOMANIE SP-MT VITE 8 X15 5449 5.8 ZN ROS.M6 6,4X12,5X1,6 U6592 ZG TUBO Q. 16X1,5X 643 ZN ROS.M6 6,4X 18X 2 U6593 ZG VITE M 6X 1X 30 U5739 8.8 ZG

NUT 6 UNI 5588 6.8 GALVANIZED LIGHTS SUPPORT LIGHT KIT FOR MOUNTED MACHINE LIGHTS SUPPORT PLATE GASPARDO RED - 1 KG DRUM BOLT M 6X16 SELF LOCKING NUT M6 PLANE WASHER D.6 D.80 ROUND REFLECTOR N[ JUTTING LOAD PANELS LAMP KIT LIGHTS COMPL. LIGHT WIRING HARNESS DECAL KIT -CEDECAL KIT SP BOLT 8X15 UNI 5449 5.8 GALVANI PLANE WASHER D.6 GALVAN. SQUARE 16X1,5X643 FLAT WASHER 6-6X 18X2 6593 ZN BOLT M 6X1X30

ECROU 6 UNI 5588 6.8 ZN SUPPORT ECLAIRAGE KIT FEUX POUR MACHINES PORT+ES PLAQUE DE SUPPORT ECLAIRAGE VERNIS ROUGE 1 KG VIS M 6X16 ECROU AUTOBL. M6 RONDELLE D.6 CATADIOPTRE ROND D.80 N. 2 PANNEAUX CHARGES SAILLANT FEU KIT ECLAIRAGE COMPL. CABLAGE KIT PHARES KIT DECALCOMANIE -CEK KIT DECALCOMANIE SP VIS 8X15 UNI 5449 5.8 ZN RONDELLE D.6 TUBE CARRE 16X1,5X643 ZN ROND. PLATE 6-6X 18X2 6593 ZN VIS M 6X1X30

MUTTER 6 UNI 5588 6.8 ZN LICHTERHALTERUNG KIT LICHTER F_R FÍRDERMASCHINE LICHTERHALTERUNGSPLATTE GASPARDO ROT I-KG-DOSE SCHRAUBE M 6X16 SELBSTSPERR.MUTTER M6 SCHEIBE D.6 RUNDER R_CKSTRAHLER D.80 N.2 TAFELN VORSPRINGENDE LADUN LAMPEN KIT LICHT KOMPL. VERKABELUNG LAMPENKIT IT ABZIEHB. -CES KIT ABZIEHB. SP SCHRAUBE 8X15 UNI 5449 5.8 ZN SCHEIBE D.6 ROHR Q. 16X1,5X643 ZN SCHEIBE 6-6X 18X2 6593 ZN SCHRAUBE M 6X1X30

TUERCA 6 UNI 5588 6.8 ZN SOPORTE LUCES KIT LUCES PARA M-QUINAS SUSPEN PLACA SOPORTE LUCES ROJO GASPARDO LATA 1 KG TORNILLO M 6X16 DADO AUTOBL. M6 ARANDELA D.6 PAPEL REFRACTARIO REDONDO D.80 2 PANELES CARGADOS SALIENTES FAROL SET LUCES COMPL. CABLEADO JUEGO LUCES ET CALCOMANAS -CESET CALCOMANAS SP TORNILLO 8X15 UNI 5449 5.8 ZN ARANDELA D.6 TUBO CUADRADO 16X1,5X643 ZN ARAND. PLANA 6-6X 18X2 6593 ZN TORNILLO M 6X1X30

cod. G19530265

USATE SEMPRE RICAMBI ORIGINALI ALWAYS USE ORIGINAL SPARE PARTS IMMER DIE ORIGINAL-ERSATZTEILE VERWENDEN EMPLOYEZ TOUJOURS LES PIECES DE RECHANGE ORIGINALES UTILIZAR SIEMPRE REPUESTOS ORIGINALES

g g

19530265 *G19530265*

GASPARDO Seminatrici SpA Via Mussons, 7 - I - 33075 Morsano al Tagliamento (PN) Italy Tel. +39 0434 695410 Fax +39 0434 695425 e-mail: gaspardo@gaspardo.it http://www.gaspardo.it

MASCHIO DEUTSCHLAND GMBH Äußere Nürmberger Straße 5 D - 91177 Thalmässing Deutschland Tel. +49 (0) 9173 79000 Fax +49 (0) 9173 790079

MASCHIO FRANCE Sarl 1, Rue de Mérignan ZA F - 45240 La Ferte St. Aubin France Tel. +33 (0) 2.38.64.12.12 Fax +33 (0) 2.38.64.66.79

MASCHIO IBERICA S.L. Calle Cabernet, 10 Poligono Industrial Clot de Moja Olerdola - 08734 Barcelona Tel. +34 93.81.99.058 Fax +34 93.81.99.059

MASCHIO USA 432 2ND Street Rock Island, IL 612Ø1 USA Ph. +1 309 794-2310 Fax +1 309 788-1610

MASCHIO MIDDLE EAST S.L MASCHIO-GASPARDO ROMANIA S.R.L. GASPARDO-MASCHIO TURCHIA MASCHIO-GASPARDO CANADA Inc

Ufficio Tecnico GASPARDO Seminatrici S.p.A.