1 minute read

You Will Need

Next Article
Index

Index

CHAPTER 6: Hacking Arduino 129

(a) (b)

Figure 6-25 A hacked toy controllable over the network

(c)

You Will Need

To make your web-controlled toy, you will first need to complete the section titled “How to Hack a Toy for Arduino Control.” In addition, you will need the following items:

Quantity Item Appendix Code 1 Arduino Ethernet Shield M4 1 Ethernet patch cable T6 1 9V or 12V 500mA Power Supply M1

Note that this project will only work with the Arduino Leonardo if the Ethernet Shield is the latest R3 Ethernet Shield. If you have an older Ethernet Shield, you will either need to buy a new Ethernet Shield or use an Arduino Uno.

This article is from: