Hanix H36C Mini Excavator Service and Parts Manual – PDF Download by www.heydownloads.com

H36C

Service Manual Japanese Craftsmanship

INTRODUCTION To insure a long life for the machine and the engine and to prevent failure and problems, proper operation, maintenance and repairs are imperative. This service manual includes an “outline,” “structure and operation,” “inspection and adjustment,” “disassembly and assembly,” “standard maintenance,” and “repair and replacement of parts” of the machine which are necessary to carry out the inspections and repairs in the repair shop. We trust that this manual will help you to effectively carry out the necessary. Repairs should they arise, also provide a accurate description of the product, and the correct repair procedures.

CONTENTS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23.

Precautions on Maintenance Outline Attachment Engine Main Pump Hydraulic Oil Filter Control Valve Joystick (Pilot Valve) Pilot Valve (1) (Travel) Pilot valve (2) (Swing, PTO) Pilot Valve (3) (Dozer) Slew Motor Travel Motor Hydraulic Cylinder Swivel Joint Crawler Spring Case and Grease Cylinder Idler Sprocket Track Roller Carrier Roller Electrical Equipment Troubleshooting

1 PRECAUTIONS ON MAINTENANCE 1. Correct operation Correct operation means to follow the correct “procedure” and “method.” Procedure focuses on speed and accuracy of each job. In the method, are addressed what type of facility, tools, instruments, materials, oil should be used, how and which part should be checked, adjusted or disassembled, and what matters to attend to.

2. Precautions on operation 1. Safety check Check that stoppers and sleepers are correctly installed for the vehicle jack-up operation. 2. Preparation Prepare all of the tools and inspect and adjust the instruments. 3. For efficiency 1) Understand the state before disassembly. What is the problem? Is disassembly absolutely necessary? 2) Before disassembly Determine whether match marks are necessary. For the electrical system, disconnect the cable from the battery terminal. 3) Precautions for disassembly In stead of checking all of the disassembled parts at once, check each part individually as it is disassembled. When removing the hydraulic unit or the hoses, mount a dust cap on the connection. 4) Repair of disassembled parts Keep the disassembled parts in order. Clearly distinguish the parts to be replaced with new parts from those to be reused. Packings, seals, rings, split pins must be replaced. NOTE: Electrical equipment, rubbers and V belts (which are easily affected by water and oil) must be handled carefully in order to prevent soiling them. 5) Clean disassembled parts Thoroughly clean the disassembled parts. 6) Assembly Perform the assembly correctly (tightening torque, application of Three Bond, screw lock, grease, use of seal tape, etc.). Also install the hose correctly.

Hose mark

1-1

2 OUTLINE CONTENTS 2-1 Location of serial No. 2-2 Name of each part 2-3 Dimensions and specification 2-3-1 PTO flow 2-4 Weight list 2-5 Oil and grease supply points 2-6 List of supply oil and grease 2-7 When to repair 2-8 Hydraulic circuit diagram

2-1 Location of Serial Number

MACHINE MASCHINE MACCHINA MAKUIME MASKIN

Model Name. Serial No.

MODEL MODELL/MODELLE MODELLO/MODELOS NO. WEIGHT/GEWICHT GEWICHT/POID PESO/PESO/VEKT

YEAR/JAAR BAUJAHR/ANNEE ANNO/ANO/ R

ENGINE MOTOR MOTEUR MOTORE MODOR

MODEL MODELL/MODELLE MODELLO/MODELOS

MAX. DRAWBAR PULL

NO.

MAX. VERT. LOAD

POWER/VERMOGEN LEISTUNG/PUISSANCE POTENSA/POTENCEA YTELSE

kW/

-1

min

Unit B Windmill Lane, Denton, Manchester M34 3SP, United Kingdom MADE IN JAPAN

2-1

kN kN

2-2 Name of each part 13

5 8

12 16

1 7

1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18.

Meter unit Starter switch Horn switch Fuse box Right operation lever Left operation lever Accelerator lever Dozer lever Right travel lever Left travel lever Swing pedal P.T.O. pedal Operation lock lever Over drive switch Hearter switch (for cabin) Wiper switch (for cabin) Manual boom lower lever Cigarette lighter

4 17

5 6 7

TER WA EMP T

C F

FUE

UR HO TER ME

2 3 8 2-2

1. 2. 3. 4. 5. 6. 7. 8. 9.

Water temperature meter Fuel gauge Hour meter Charge lamp Engine oil pressure lamp Glow lamp Air filter lamp Head light switch Heater change lever (coldâ&#x2020;&#x201D;warm)

2-3 Dimensions and Specifications

2-3

Model Machine Cabin rubber weight Cabin steel Standard bucket capacity/width Type Engine Displacement Rated output Overall length Dimensions Overall width Overall height Max. digging depth Max. vertical digging depth Max. digging height Max. dumping height Working Max. digging radius range Reach at ground front Min. slew radius swing Rear slew radius Boom swing angle L/R Max. digging force(Bucket) Max. digging force(Arm) Max. drawbar pull Performance Travel speed(low)/(high) Slew speed Gradeability type Pump Hydraulic oil flow system oil flow PTO Main relief pressure Dozer blade width × height Shoe width × tumbler center Underbody Cabin rubber Ground pressure Cabin steel Type of travel motor Crawler tension system Hyd. Tank capacity Fuel tank capacity Capacity Engine oil capacity Cooling water capacity Noise level Lwa/Lpa

H36C kg kg 3 m /mm cc kW(PS)/min-1 mm mm mm mm mm mm mm mm mm mm mm mm deg kN kN kN km/h min-1 Angle lit/min lit/min MPa mm mm kPa

lit lit lit lit d

2-4

3,320 3,330 0.10/590 MITSUBISHI S3L2 1,318 19.9(27.0)/2400 5,010 1,580 2,420 3,130 2,290 5,010 3,540 5,180 5,070 2,060 1,700 1,410 L80/R50 27.9 17.9 26.6 3.0/4.5 8.7 30 Piston2+Gear1 42/42/25.2 67.2 20.6/20.6/17.2 1580 × 370 300 × 1640 30.9 31.4 Piston shoe-in type Grease cylinder 50.5 42.0 4.5 5.5 96/80

2-3-1 H36C PTO Flow

2-5

2-4 Weight list Unit: kgf Part name

H36C

Part name

H36C

Boom

140

Swing cylinder

Arm

Dozer cylinder

Bucket

Turning bearing

Dump link

Track frame

339

Bucket link

4×2

Dozer

115

Boom joint pin

3.6

Steel crawler

182×2

Arm joint pin

2.3

Rubber crawler

157×2

Idler

19×2

Bucket pin

2.3×3

Swing post

Adjust cylinder

18×2

Swing post pin

Track roller

6.8×6

Swing frame

401

Carrier roller

2.5×2

Hydraulic oil tank

Sprocket

6.5×2

Fuel tank

Turning motor

Engine cover(A)

Drive motor

43×2

Engine cover(B)

13.5

Console box

9×2

Counter weight

300

Engine

135

Guard(R)(L)

35×2

Radiator

Guard(Center)

10.5

Battery

Tops roof

Battery cover

Operator cabin

165

Swivel joint

Boom cylinder

Control valve

Arm cylinder

Pump

Bucket cylinder

Seat plate

2-6

2-5 Oil and grease supply points

Arm cylinder rod pin Boom arm joint pin

Bucket cylinder head pin

Fuel tank Arm cylinder head pin

Hydraulic tank

Bucket link pin

Engine

Bucket cylinder rod pin

Bucket pin Boom cylinder rod pin Boom cylinder head pin Travel motor Dozer cylinder rod pin Track roller

Dozer joint pin

Adjust cylinder Boom joint pin Dozer cylinder head pin

Swing post pin Front idler

Slew gear

Swing cylinder rod pin Swing cylinder head pin

2-7

Slew bearing

2-6 List of lubrication Type of oil according to ambient condition

Name

Quantity of oil/water

Engine cooling water Fuel tank (effective capacity)

5.5 ℓ

Soft water (antifreeze is mixed in water)

42 ℓ

Diesel fuel with freezing point below –7°C

Engine lubricating oil

4.5 ℓ

SAE10W-30 CD (CF or higher grade in hot environment)

700 cc

SAE 30-CD

50.5 ℓ

ISO VG 46

Track roller (1 piece)

100 cc

SAE 30-CD

Front idler (1 piece)

80 cc

SAE 30-CD

Travelling motor (reduction gear) Hydraulic tank

–10°C~40°C

–20°C~0°C

Genuine oil

Be sure to use Castrol Hyspin 46.

Table of recommended Lubricants (makers shown below are reference purposes only) No. 1 2 3 4 5 6

LUBRICANT Engine Oil Gear Oil Hydraulic Oil Cup Grease Anti Freeze Diesel Fuel

SHELL Myrina oil 10W-30 Spirax Heavy Duty 140 ISO VG 46 (equivalent) Alvinia 2 Anti Freeze —

MOBIL Delvac Super 10W-30 Mobilub HD 85W-140 ISO VG 46 (equivalent) Mobilux 2 Anti Freeze —

*The engine oil SAE 10W-30 CF or equivalent at the time of shipment is used for the lubricating oil for slewing and travelling speed reducer. *Use class CD engine oil in API Service Classification (CF or higher in Hot environment).

Cooling water (antifreeze)

*To prevent the cooling system from freezing, add antifreeze to the cooling water. Replace the cooling water after 1 year from its delivery, because the effect will decrease. *Use "Long-life coolant" for the antifreeze. *Mixing ratio of antifreeze. –10°C –15°C –20°C –25°C –30°C Temperature –5°C Injection rate 1.5 ℓ 1.8 ℓ 2.3 ℓ 2.6 ℓ 3.1 ℓ 3.7 ℓ Engine inside capacity

2.4 ℓ

Radiator capacity

Hose

1.5 ℓ

0.6 ℓ 2-8

Reserve tank capacity

0.8 ℓ

Total

5.5 ℓ

2-7 When to repair It is difficult to judge when to perform periodic inspections, maintenance and repairs. Although the wearing rate of each component differs depending on the grade of daily inspection, the skill in machine operation, the working conditions, the quality of used lubricating oil, the frequency of oil replacement, the quality of land to be dug, the digging rate, the schedule for maintenance and repairs should be decided considering the state of engine, the indication of the hour meter, the degree of wear in each part, the state of hydraulic system, your experience and data.

2-7-1 Category of maintenance Prestart-up inspection

Execute every day before beginning operation

Maintenance after the first 25 service hours

Execute every 25 hours by the hour meter

Maintenance after the first 50 service hours

Execute once a week (every 50 hours by the hour meter)

Maintenance after the first 100 service hours

Execute every 100 hours by the hour meter

Maintenance after the first 250 service hours

Execute every 250 hours by the hour meter

Maintenance after the first 300 service hours

Execute every 300 hours by the hour meter

Maintenance after the first 500 service hours

Execute every 500 hours by the hour meter

Maintenance after the first 1,000 service hours

Execute every 1,000 hours by the hour meter

Maintenance after the first 2,000 service hours

Execute every 2,000 hours by the hour meter

2-9

2-7-2 Maintenance procedure Inspection and maintenance item Engine oil pan

Inspection and maintenance interval (hours) 7 Check oil level

Fuel filter

Engine valve clearance

Fan belt

Check and adjust

Fuel tank

Check oil level

7 8

cylinder) and grease the crawler

15 16

Replace the element

Inspect Inspect and grease Check and adjust Inspect, clean and supply distilled water

14 Battery liquid

amount and specific gravity Inspect each body part for loosening and damage Each lever and instrument Lubricating oil of slew/travelling reduction gear

Check and tighten Inspect Replace oil (after the first 500 service hours only for a new machine)

18 Electrical wiring 19 20 21

Replace oil Replace the cartridge

Replace the cartridge (New machine only) Clean the element (New machine only)

others Slew bearing

Inspect crawler

Replace the element

Check and clean Drain water and sediment

Hydraulic suction filter

13 tension(grease

Replace the element Inspect and adjust

Replace and clean

Check oil level

Hydraulic line filter

11 Bucket teeth and

1,000 Clean

Drain water and sediment, clean strainer

500

Replace the cartridge

Inspect and adjust (New machine only)

Radiator (sub-tank) Check water level Radiator fin Check and clean Air cleaner Hydraulic oil tank

250 Replace the engine oil

Check and clean

100

Replace the cartridge (New machine only)

Engine oil filter

50 Replace the engine oil (New machine only)

Inspect Water and oil Inspect leakage in each body part Inspect and grease Inspect attachment attachment PTO filter element

Replace the element 2-10

Replace oil

2-7-3 Prestart inspections (1)Prestart inspections

Item Engine oil pan

Content Check oil level

Fuel tank

Check fuel level

Radiator

Check water level

Each oil/grease supply point Inspect each body part for looseness and damage Each lever and instrument

Hydraulic oil tank

Check oil level

Bucket teeth and others

Wear

Electrical wiring

Looseness and tears

Fan belt

Check and adjust

Remarks Before starting operation Check that the fuel level is above the center of level gauge. Check that the amount of water in sub-tank is within a specified level.

Oil and grease

Refer to page 2-6

Looseness, removal, water and oil leakage

Refer to tightening torque list.

Operation check

Whether abnormal operation exists or not Add oil if its level falls below the specified level. (Be careful of the position of machine.) Check whether the replacement of parts is necessary or not. Loosened terminal, torn covering, etc. 10mm(0.4â&#x20AC;?) to 12mm(0.5â&#x20AC;?) sag at the center

(2)Post opertaion inspections Item

Content

Each body part

Clean, check for water and oil leaks. Looseness, failure, etc.

Fuel tank

Fuel supply

Cooling water

Drain

2-11

Remarks Treatment of the part where cleaning was not sufficient such as dirt sticking to the body or muddy water remaining on the body. Add fuel Only when the danger of freezing exists

Tightening torque list: In the present inspection, always check for loosened bolts or nuts and correctly tighten them according to the following tightening torque list. N-m

Tightening torque of the bolt and nut (Body)

Material

8.8 N.m

10.9 N.m

12.9 N.m

12.5

M10

M12

100

120

130

M14

160

195

220

M16

250

305

340

Size

N-m

Tightening torque of the hydraulic pipings

PT screw Torque Size 1 — 4 3 — 8 1 — 2 3 — 4 1 1 1— 4 1 1— 2

PF screw N.m

Torque Size 1 — 4 3 — 8 1 — 2 3 — 4

36 55 86 130 195

300 400

2-12

N.m

27-30 47-52 57-63 108-120 126-140

2-7-4 Maintenance every 50 service hours Item

Content Replace engine oil and filter

Engine oil pan

Engine valve clearance

Inspect and adjust

Fuel tank

Drain sediment and water Clean the strainer

Radiator fin

Clean the fins

Slew bearing

Inspect and grease

Battery

Liquid quantity

Specific gravity 14

Battery Clean

Each oil/grease supply point

Oil and grease

2-13

Remarks Only for a new machine. After this, every 250 service hours Only for a new machine. After this, every 500 service hours Remove the drain plug on the lower part of the tank Wash strainer with diesel fuel Dust sticking to the fin affects the cooling effect and causes overheating Always grease the machine after it is used in water Whether the liquid level is proper or not. If short, add distilled water 1.26 when fully charged; 1.20 when discharged (Recharge the battery when 1.20.) Clean each part, brush and connect terminal and apply grease Refer to page 2-7

2-7-5 Maintenance every 100 service hours Item

Content

Fuel filter

Clean the element

Air cleaner

Clean the dust cover, clean or replace the element

Hydraulic line filter

Replace the cartridge

Hydraulic suction filter

Clean the element

Remarks After cleaning, open the cock to vent air Check also for a loosened band Only for a new machine. After this, every 500 service hours Only for a new machine. After this, every 500 service hours

2-7-6 Maintenance every 250 service hours Item

Content

Engine oil

Replace the engine oil

Engine oil filter

Replace the cartridge

Hydraulic oil tank

Drain water and sediment

Lubricating oil of slew and travelling reduction gears

Replace lubricating oil

Remarks Remove the drain plug on the lower part of the tank. (After 50 service hours for a new machine) After 50 service hours for a new machine After air is vent, loosen the drain plug Replace oil after the first 200 service hours. Every 1,000 service hours after this (Refer to Table of Oil/Grease Supply Points)

2-7-7 Maintenance every 500 service hours

Item Fuel filter Engine valve clearance

Radiator

Replace cooling water and clean the radiator

Air cleaner

Replace the element

Hydraulic line filter

Replace the cartridge

Hydraulic suction filter

Clean the element

Content Replace the element Check valve clearance

2-14

Remarks Clean the inside of bowl Clearance between the valve and the rocker Remove the drain plug, clean the radiator and add water to the sub-tank up to the specified level. After 100 service hours for a new machine

2-7-8 Maintenance every 1,000 service hours 1

Item Engine oil pan

Hydraulic oil tank

Lubricating oil of slew and travelling reduction gears

Content Clean engine oil pan Replace the hydraulic oil and clean the oil tank Replace the lubricating oil

Remarks

Clean the inside of the tank Refer to Table of Oil/Grease Supply Points. (For new machine, every 200 service hours)

2-7-9 Maintenance every 2,000 service hours 15

Item Track roller

Remarks

Content Replace

Table of Oil/Grease Supply Points No. 1 2 3

Oil/Grease Supply Point

Specified oil (genuine part)

Quantity

Travel motor Track roller Front idler

API Classification CD Class SAE30

700 cc 100 cc 80 cc

2-15

Time Every 1,000 service hours (At first, replace after the first 500 service hours) Every 2,000 hours Every 2,000 hours

2-8 Hydraulic circuit diagram

2-16

Item

H36C

Boom cylinder

ø80×ø45×609 st

Arm cylinder

ø80×ø45×600 st

Bucket cylinder

ø75×ø45×500 st

Swing cylinder

ø80×ø45×652 st

Dozer cylinder

ø90×ø50×125 st

Slew motor

PCR-2B-10A-P-8565Z

Travel motor

PHV-300-41-9R1-8855A

Engine

Pump flow rate

Pressure

Pump capacity

Item

Main relief

H36C

17.5 cc/rev

10.5 cc/rev

4.5 cc/rev

20.6 MPa

17.2 MPa

Port relief

23.5 MPa

Unload (pump)

2.9 MPa

Slew

15.7 MPa

42 /min

25.2 /min

Type

S3L2

Constant output

19.9 kW (27 ps)

Speed

2,400 min-1 85 N.m/1,800 min-1

Torque

2-17

3 ATTACHMENT CONTENTS 3-1 Standard of maintenance 3-1-1 Attachment 3-2 Inspection and adjustment 3-2-1 Measuring the fall of the attachment of its own weight 3-2-2 Measuring the speed of the attachment cylinder

3-1 Standard of maintenance 3-1-1 Attachment

8 9 7

14 6 12 4 5

15 16 17

b a

3. S w i n g p o s t bracket and swing post

2. Swing cylinder rod

b a

1. Swing cylinder head

I F

4. Boom joint

5. Boom cylinder head 3-1

6. Boom cylinder rod

9. Boom/arm joint

b a

12. B u c k e t / d u m p link joint

11. Bucket cylinder rod

10. Bucket cylinder head

8. A r m c y l i n d e r rod

7. A r m c y l i n d e r head

b U

16. Dozer cylinder rod

17. Dozer cylinder head 3-2

15. Dozer joint

14. A r m / b u c k e t joint

13. Arm/bucket link joint

b a

Unit: mm(in) Basic Dimension Allowable Clearance

No. Item A

Swing cylinder head pin and head bracket

ø35(1.4”)

1.0(0.04")

Swing cylinder head pin and the boss of head bracket

ø35(1.4")

1.0(0.04")

Swing cylinder rod pin and swing post

ø35(1.4")

1.0(0.04")

Swing post pin and bush

ø60(2.4")

1.0(0.04")

Swing post pin and swing post bracket

ø60(2.4")

1.0(0.04")

Boom joint pin and bush

ø45(1.8”)

1.0(0.04")

Boom joint pin and swing post

ø45(1.8”)

1.0(0.04")

Boom cylinder head pin and swing post

ø40(1.6")

1.0(0.04")

Boom cylinder rod pin and boom

ø40(1.6")

1.0(0.04")

Arm cylinder head pin and boom

ø40(1.6")

1.0(0.04")

Arm cylinder rod pin and arm

ø40(1.6")

1.0(0.04")

Boom/ arm joint pin and bush

ø40(1.6")

1.0(0.04")

Boom/ arm joint pin and boom

ø40(1.6")

1.0(0.04")

Bucket cylinder head pin and arm

ø40(1.6")

1.0(0.04")

Bucket cylinder rod pin and dump link

ø40(1.6")

1.0(0.04")

Bucket cylinder rod pin and bucket link

ø40(1.6")

1.0(0.04")

Bucket pin and bush

ø40(1.6")

1.0(0.04")

Bucket pin and bucket

ø40(1.6")

1.0(0.04")

Bucket link pin and bush

ø40(1.6")

1.0(0.04")

Bucket link pin and bucket link

ø40(1.6")

1.0(0.04")

Dozer joint pin and frame

ø34.8(1.4”)

1.0(0.04")

Dozer cylinder rod pin and frame

ø40(1.6")

1.0(0.04")

ø40(1.6")

1.0(0.04")

W Dozer cylinder head pin and dozer

3-3

Unit: mm(in) Criterion Standard b clearance

Spacer

No.

Item

Clearance between swing cylinder head and swing post

Clearance between swing cylinder rod and head bracket 51(2.1") 50(1.96") 1.0~2.5(0.04”~0.1”)

〃

Clearance between swing post and frame

〃

Clearance between boom and swing post

195(7.7") 193.5(7.62") 0.5~2.5(0.02”~0.1”) MBU3-00024 MBU3-00025

ø46×t0.5 ø46×t1.0

Clearance between boom cylinder head and swing post

51(2.0") 50(1.96") 1.0~2.5(0.04"~0.1") MBU3-00022 MBU3-00023

ø41×t0.5 ø41×t1.0

Clearance between boom cylinder rod and boom

51(2.0") 50(1.96") 1.0~2.5(0.04"~0.1")

〃

Clearance between arm cylinder head and boom

51(2.0") 50(1.96") 1.0~2.5(0.04"~0.1”)

〃

Clearance between arm cylinder rod and arm

51(2.0") 50(1.96") 1.0~2.5(0.04"~0.1")

〃

Clearance between boom and arm

150(5.9") 149.5(5.88") 0.5~2.5(0.02”~0.1”)

〃

Clearance between bucket cylinder head and arm

51(2.0") 50(1.96") 1.0~2.5(0.04"~0.1")

〃

Clearance between bucket cylinder rod and dump link

51(2.0") 50(1.96") 1.0~2.5(0.04"~0.1")

〃

Clearance between dump link 135(5.31") 134.5(5.3") 1.0~2.5(0.04"~0.1") and bracket

〃

Clearance between arm and bucket link

135(5.31") 134.5(5.3")0.5~1.0(0.02"~0.04")

〃

Clearance between arm and bucket

135(5.31") 134.5(5.3") 0.5~1.0(0.02”~0.04")

〃

Clearance between dozer and frame

53(2.1")

50(1.96")

Clearance between dozer cylinder rod and frame

57(2.2")

Clearance between dozer cylinder head and dozer

57(2.2")

a 53(2.1")

Part Number

NBU3-00020 50(1.96") 2.5~4.0(0.1”~0.16”) NBU3-00021

215(8.46") 213(8.39") 2.0~3.3(0.08"~0.13")

Dimension ø36×t0.5 ø36×t1.0

NBU3-00020 NBU3-00021

ø36×t0.5 ø36×t1.0

55(2.16") 2.0~3.5(0.08"~0.14")

MBU3-00022 MBU3-00023

ø41×t0.5 ø41×t1.0

55(2.16") 2.0~3.5(0.08"~0.14")

〃

3-4

2.5~5.0(0.1"~0.2")

〃

3-2 Inspection and adjustment 3-2-1 Measuring the natural fall of the attachment 1. Measuring the location of the attachment Set the temperature of the hydraulic oil to 50Âą5Â°C. Adjust the height of arm/bucket joint so that it equals that of the boom joint. Then, retract the dozer cylinder to the minimum length and stop the engine. 2. Measurement Draw a reference line on the cylinder head with a Magic Marker and measure the length from the line to the cylinder tube. Measure the length again 3 minutes later. Then record the difference in the length Unit: mm (or less) Cylinder name

Standard value

Allowance

Boom cylinder

Arm cylinder

Bucket cylinder

Dozer cylinder

Make 1 and 2 the same height. W: Weight

About: 165 kg

Arm cylinder Bucket cylinder

Boom joint...1,

Dozer cylinder

Boom cylinder Arm/bucket joint...2, Mark: Direction of cylinder movement

3-5

New standard value

Allowable limit

2.8±0.5

3.7

Down

2.6±0.5

3.6

Dig

3.4±0.6

4.7

Dump

3.1±0.5

4.3

Dig

3.2±0.5

4.6

Dump

2.2±0.4

3.0

1.0±0.3

1.4

Down

1.0±0.3

1.3

Right swing

Condition

5.8±0.5

8.0

Left swing

3-2-2 Measuring the speed of attachment cylinder (at full engine speed and oil temperature 50±5°C)

5.0±0.6

6.0

Machine position

Boom Make bucket teeth touch the ground

Unit

Extend cylinder to the Maximum length Arm Retract cylinder to the minimum length

Extend cylinder to the maximum length Bucket Retract cylinder to the minimum length

sec

Extend cylinder to the maximum length Dozer Make dozer contact the ground

Lift dozer to the maximum height Swing Retract cylinder to the minimum length

Extend cylinder to the maximum ground

3-6

4 ENGINE CONTENTS 4-1 Specification 4-2 Performance curve 4-3 Location of serial number 4-3-1 Engine 4-3-2 Standard engine speed 4-4 Inspection and maintenance procedures for engine parts

4-1 Specification Engine

S3L2 In-line 3 cylinder 4cycle overhead valve type

Type Number of cylinders–bore × stroke

3–78 mm × 92 mm 1,318 cc

Ignition order

1–3–2

Performance

Dimensions

Displacement

Overall length

556 mm

Overall width

440 mm

Overall height

615 mm

Rated output

19.9 kW(27 ps) / 2,100 min-1 85 N.m / 1,800 min-1

Maximum torque Maximum idling speed

2,600 ± 30 min-1

Minimum idling speed

1,200 ± 25 min-1

Fuel consumption

247 g / kW.h

Dry weight

135 kg

Fuel oil

Diesel fuel

Fuel pump

Bosh type

Governor

Centrifugal type

Generator

12V × 50A

Starter

12V × 1.7 kW

Battery

12V × 60 AH

4-1

4-2 Performance curve

85 80 75 70

Output torque (N.m)

Without fan

(27.7 ps) 20.4 kW / 2400 min-1

Brake hose power

(kW) With fan

260 250 240 0

1000

2000 Engine speed (min-1)

4-2

3000 NL / 2300â&#x20AC;&#x201C;30 min-1

Fuel consumption (g / kW.h)

4-3 Location of serial number 4-3-1 Engine

Type of Engine Engine No. (identification plate)

4-3-2 Standard engine speed (at new machine delivery) Conditions Maximum idling speed Speed when 1P relief is used Speed when 2P relief is used

Idling speed 2,600 ± 30 min-1 2,450 ± 70 min-1 2,450 ± 70 min-1

4-3

4-4 Inspection and maintenance procedure for engine parts Inspecting and Adjusting Valve Clearance Front of engine 8 4

NOTE Make an adjustment to the valve clearance when the engine is cold.

1 10

3 9

7 5 11

(1) Slightly loosen the cylinder head bolts and retighten them to the specified torque in number sequence. Tightening torque

9 ± 0.5 kgf.m (88 ± 5 N.m)

(2) Find top dead center compression position for No.1 piston by using the procedure that follows: (a) Turn the crankshaft until TDC mark on the crankshaft pulley is aligned with the mark on the timing gear case. (b) With No.1 piston at top dead center on the compression stroke, the rocker arms will not be moved when the crankshaft is turned approximately 20° in both directions. (c) With No.1 piston at top dead center on the compression stroke, the rocker arms will not be moved when the crankshaft is turned approximately 20° in both directions. (3) Loosen the lock nut for the adjusting screw. With a feeler gauge inserted between the rocker arm and valve cap, adjust the valve clearance by turning the adjusting screw. Unit: mm(in.) Item Standard Valve clearance (both inlet 0.25(0.0098) and exhaust valves)

4-4

Cylinder head bolt tightening sequence TDC (top dead center) mark for No.1 and No.4 Mark on timing pistons gear case IT(Injection timing) mark

TDC mark for No.2 and No.3 pistons

Timing mark

(4) Hold the adjusting screw and tighten the lock nut. (5) After the valve clearance of the valves for No.1 cylinder has been adjusted, turn the crankshaft 180° in the direction of engine rotation and adjust the valve clearance on the valves for the remainder of the cylinders in firing order (injection sequence). Firing order (injection sequence) S3L

Crankshaft rotation angle

1–3–2 !

Adjusting valve clearance

240°

CAUTION

After the valve clearance on the valves for all cylinders has been adjusted, turn the vrankshaft two or three times and make sure the valve clearance is correct.

4-5

Inspecting and Adjusting Injection Nozzles 1.Inspection (1) Injection pressure (valve opening pressure test) (a) Install the injection nozzle on the tester. Slowly operate the tester handle to bleed (remove) air from the tester. (b) Operate the tester handle at a speed of one stroke per second to make a slow increase in pressure until the valve in the injection nozzle starts to open. Read the maximum gauge pressure at the instant fluid flows from the tip. (c) If the injection pressure is incorrect, disassemble the nozzle and change the thickness of the washer. Injection pressure (valve opening pressure) Standard

Fuel injection nozzle ready for test

2 140 +5 0 kgf/cm +71 (19910 psi) [13729 +490 kPa] 0

Removing tip from injection nozzle

NOTE An increase or decrease of washer thickness by 0.1 mm(0.004 in.) will vary the injection pressure by 10kgf/cm2 (142 psi)[981 kPa]. 10 kinds of washer are available in thickness from 1.25 mm(0.049 2 in.) to 1.70 mm(0.066 9 in.) in increments of 0.05 mm (0.002 0 in.) !

WARNING

When the injection nozzles are tested, be sure to wear eye protection. Fuel comes from the orifices in the nozzle tip with high pressure. The fuel can pierce (go through) the skin and cause serious injury to the operator. Keep the tip of the nozzle pointed away from the operator and into the fuel collector.

4-6

(2) Orifice restriction test (a) Look at the orifice discharge pattern (shape of discharge) when fluid begins to flow through the injection nozzle. The discharge must be straight. Any change is an indication of a bad nozzle. (b) Operate the tester handle at a speed of one stroke per second to make sure the discharge is straight.

Good nozzle (use again)

Discharge pattern for orifice with a restriction (Recondition or replace)

Orifice restriction test

(3) Nozzle tip washing and replacement (a) loosen the retaining nut and remove the tip from the injection nozzle. Wash the needle valve and body in clean diesel fuel. After washing, put the needle valve in the body in clean diesel fuel. !

CAUTION

Don not hit the tip when removing it from the injection nozzle.

Needle valve

Washing nozzle tip

NOTE Keep the needle valves with their respective bodies. Do not use needle valves or bodies with other bodies or needle valves. (b) After cleaning the tip, install it in the nozzle and tighten the retaining nut to the specified torque. Tightening torque

3.75 Âą 0.25 kgf.m (36.8 Âą 2.5 N.m)

NOTE a) Do not touch the sliding surface of the needle valve. b) When installing the new nozzle tip, remove synthetic resin film from the tip and slide the needle valve in the body in clean diesel fuel to wash off inhibitor completely.

4-7

Body

Disassembly

Tightening torque: 5.5±0.5 kgf.m [54±5 N.m]

Check for wear Check test force and squareness

Check for wear or damage

4 3

Check for too much carbon on tip of nozzle or in nozzle orifice.

Tightening torque: 3.75±0.25 kgf.m [36.8±2.5 N.m]

Disassembly sequence and inspection points

1 2 3 4

Retaining nut Nozzle tip asse Piece Pin

5 Spring 6 Washer 7 Body

4-8

Measuring Compression Pressure 1. Inspection Check to make sureâ&#x20AC;&#x201C; (1) The crankcase oil level is correct. and the air cleaner, starter and battery are all in normal condition. (2) The enigne is at the normal operating temperature. 2. Measurement (1) Move the control lever to a position for shutting off fuel supply. (2) Remove all glow plugs from the engine. Install the compression gauge and adapter(ST332270) combination to a cylinder on which the compression pressure is to be measured. (3) Turn the engine with the starter and read the gauge pressure at the instant the gauge pointer comes to stop. (4) If the gauge reading is below the limit, overhaul the engine. !

CAUTION

(a) Be sure to measure the compression pressure on all cylinders. (b) The compression pressure varies with change of engine rpm. This makes it necessary to check engine rpm at the time of measuring the compression pressure. Item Engine speed, rpm Compression pressure kgf/cm2(psi)[kPa] Maximum permissible difference between average compression pressure of all cylinders in the engine. kgf/cm2(psi)[kPa]

Compression gauge and adapter

Standard 290 30 (427) SL [2942] 32 (455) SL2 [3138]

Measuring compression pressure

Limit â&#x20AC;&#x201D; 30 (427) [2942] 32 (455) [3138]

3 (42.7) [294] !

CAUTION

(a) It is important to measure the compression pressure at regular intervals to obtain the data on the gradual change of the compression pressure. (b) The compression pressure would be slightly higher than the standard in a new or overhauled engine owing to breaking-in of the piston rings, valve seats, etc. It drops as the engine components wear down. 4-9

Thread, mm Bolt or nut Diameter

Pitch

Cylinder head bolt

M10

1.25

9±0.5(65±4)[88±5]

Rocker cover bolt

1.25

1.15±0.15(8.3±1.1)[11.3±1.5]

Rocker shaft bracket bolt

1.25

1.5±0.15(8.3±1.1)[11.3±1.5]

Thermoswitch

M16

1.5

31.5

2.3±0.4(16.6±3)[22.6±4]

Crankshaft pulley nut

M18

1.5

—

17.5±2.5(127±18)[172±25]

Main bearing cap bolt

M10

1.25

5.25±0.25(38±2)[51.5±2.5]

Connecting rod cap nut

1.0

—

3.55±0.25(25.7±2)[34.8±2.5]

Rear plate bolt (for tractor engine)

M12

1.25

9.5±1(69±7)[93±10]

Rear plate bolt(standard)

M12

1.25

6.5±1(47±7)[64±10]

Rear plate bolt(stamping)

1.25

1.15±0.15(8.3±1.1)[11.3±1.5]

Flywheel bolt

M12

1.25

13.5±0.5(98±4)[132±5]

Oil pan bolt (for tractor engine)

1.25

2.8±0.3(20.3±2.2)[27.5±3]

Oil pan drain plug

M14

1.5

4±0.5(29±4)[39±5]

Pressure relief valve

M22

1.5

5±0.5(36±4)[49±5]

Oil filter

M20

1.5

—

1.2±0.1(8.7±0.7)[12±1]

PT1/8

—

1±0.2(7.2±1.4)[10±2]

Fuel injection pipe nut

M12

1.5

—

3±0.5(22±4)[29±5]

Fuel leak0off pipe nut

M12

1.5

—

2.75±0.25(20±2)[27±2.5]

Delivery valve holder

—

4.5±0.5(32.5±4)[44±5]

Fuel injection nozzle holder

M20

1.5

—

5.5±0.5(40±4)[54±5]

Retaining nut for delivery valve holder body

M16

0.75

—

3.75±0.25(27±2)[37±2.5]

Sliding sleeve shaft

M10

1.25

29.5

3.6±0.6(26±4)[35±6]

Special nut for torque spring set

M12

1.0

—

2±0.5(14±4)[20±5]

Glow plug

M10

1.25

1.75±0.25(12.7±2)[17.2±2.5]

Glow plug connection plate

0.7

—

0.125±0.025(0.9±0.2)[1.2±0.2]

Stop solenoid nut

M30

1.5

—

4.5±0.5(32.5±4)[44±5]

Starter B terminal

1.25

—

1.1±0.1(8±0.7)[10.8±1]

Oil pressure switch

4-10

Clamp length

Torque, kgf.m(lb.ft)[N.m]

Width across flats

Tightening Torques for Standard Bolts and Nuts Unit:N-m{kgf-m}(lbf-ft) Bolt Sise M6 M8 M10 M12

7T 7.85-9.80{0.8-1.0}(5.8-7.2) 14.7-21.6{1.5-2.2}(10.8-15.9 29.4-41.2{3.0-4.2}(21.7-30.4) 53.9-73.5{5.5-7.5}(39.8-54.2)

9.80-12.7{1.0-1.3}(7.2-9.4) 17.7-24.5{1.8-2.5}(13.0-18.1) 9.4-41.2{3.0-4.2}(21.7-30.4)

Note: a. The table above applies only to standardized bolts and nuts. All torques shown assume use of spring washer together with bolts and nuts. All bolts and nuts appearing in this manual should be tighrened according to this table unless otherwise indicated. d. Standard bolts and nuts should be tightened in "dry" condition, without lubricaring threads with oils. Tightening Torques for Standard Eye Bolts(for Dry Condition)

Nominal Diaerer x Thread Pitch Width Across Flars mm(in) mm M8x1.25 M10x1.25 M12x1.25 M14x1.5 M16x1.5 M18x1.5 M20x1.5 M24x1.5 M27x1.5

12(0.47) 14(0.55) 17(0.67) 22(0.87) 24(0.94) 27(1.06) 30(1.18) 36(1.42) 42(1.61)

Torque Strength Class: 4r N-m 8±1 15±2 25±3 34±4 44±5 74±5 98±10 147±15 226±20

kgf-m 8±0.1 15±0.2 25±0.3 35±0.4 4.5±0.5 75±0.5 10.0±10 15.0±1.5 23.0±2.0

lbf-ft 5.8±0.7 15±1.4 18.0±2.2 25.3±2.9 32.5±3.6 54.2±3.6 72.3±7.2 108.5±10.8 166.3±14.5

Tightening Torques for Standard Union Nuts(for Dry Condition) Nominal Internal Nominal Diameter Width Across Flars x Thread Pichmm Diamerer mm(in) 63 80 100 120 150 180 200 220 254

M14x1.5 M16x1.5 M20x1.5 M22x1.5 M27x1.5 M30x1.5 M30x1.5 M33x1.5 M36x1.5

19(0.7) 22(0.9) 27(1.1) 30(1.2) 32(1.3) 36(1.4) 36(1.4) 41(1.6) 41(1.6)

4-11

N-m

kgf-m

lbf-ft

39 49 78 98 157 196 196 245 294

4 5 8 10 16 20 20 25 30

29 36 58 72 116 145 145 181 217

5 MAIN PUMP CONTENTS 5-1 Specification 5-2 Structure 5-3 Removing and installing the pump 5-3-1 Removing the pump 5-3-2 Installing the pump 5-4 Performance test of the hydraulic pump 5-4-1 Measuring instrument 5-4-2 Preparation 5-4-3 Connecting tester 5-4-4 Measuring procedure 5-4-5 P-Q characteristic curve

5-1 Specification PA

67.5(2.7") 25.5(1.0")

SOL A

27.5(1.1")

PB1 PB2 SOL B (P4) X P3 P2 P1

34.5(1.4") M O S1

170(6.7") 146(5.7")

Pump type Displacement cc/rev Rated pressure MPa S1 Port size PA,PB1,PB2 P1,P2,P3 Direction of rotation Weight (kg)

128(5.0") 103(4.1") 241(9.5")

0 0.056

286.7(11.3")

45(1.8")

PVD-15B-35BP-11G5-4621H P1 P2 P3 PA,PB 17.5 17.5 10.5 4.5 20.6 20.6 17.2 2.9 1 PF 1 /4 PF 1/4 PF 1/2 Clockwise seen from shaft side 25

5-1

5-2 Structure 23

27 21 19 26 12

11 27

22 42

20 14 13 17 2 34 33 32 39

38 40 37 36 35

1. Body 2. Body 3. Shaft 4. Cylinder 5. Valve plate 6. Piston 7. Shoe 8. Shoe holder 9. Barel holder 10. Swash plate 11. Needle 12. Pin 13. Packing 14. Spring C

15. Spring T1 16. Spring holder 17. Spring guide 18. Rod 19. Washer 20. Retainer 21. Stopper pin 22. Pin 23. Bearing 24. Bearing 25. Oil seal 26. Conical washer 27. Snap ring 28. O-ring 5-2

29. O-ring 30. Plug 31. Spring pin 32. Socket head bolt 33. Nut 34. Seal washer 35. Plug 36. Gear pump 37. Coupling 38. Collar 39. O-ring 40. O-ring 41. O-ring 42. Valve assembly

5-3 Removing and installing the pump 5-3-1 Removing the pump 1. Remove the nipple, TEE, elbow and hoses around the pump. Attach a cap to the removed hoses to keep dust off. Store the nipples and elbows in treated oil. 2. Remove the pump mounting bolts(1). 3. Remove the pump from the flange 2. If removal is difficult, insert a screwdriver and remove the pump little by little with equal force applied on the right and left sides.

5-3-2 Installing the pump 1. Replace with a new pump and install it on the pump flange 2. Check that the spline of the shaft fits smoothly with the boss of the coupling. When tightening the bolts 1, tighten the left and right side bolts slowly and evenly. Bolt M12 Ă&#x2014; 30

Tightening torque 90~115 N.m

* Precautions on installing the pump 1. Make sure there is no misalignment.

3 2

5-3

5-4 Performance test of the hydraulic pump

Hydraulic pressure tester

5-4-1 Measuring instrument Measuring range of flow rate ( /min) Measuring range of pressure (MPa) Measuring range of temperature (Â°C) Port size Pressure gauge Tachometer Hose for testing

7 0 ~ 34.3 0 ~ 150 PF1 O ring type 49 MPa, 4.9 MPa Diesel tachometer (digital type) Equivalent to the hose of 20.6 MPa (2,987 psi) high pressure (Nominal size PF1/ 2-PF1/ 2Ă&#x2014;1m)

5-4-2 Preparation 1. Park machine on flat ground and stop engine.

5-4-3 Connecting tester 1. 2. 3. 4.

Remove the hose on the pump port of the control valve. Connect the removed hose to the outlet of the tester. Connect the hose on the discharge of the pump to the inlet of the tester. Connect pressure gauge to port measuring port.

5-4-4 Measuring procedure Open the throttle valve of the tester and start the engine. Read the pressures on the pressure gauge and measure the flow at that time. At the same time, record the engine speed.

5-4

Hydraulic pressure tester OUT Throttle valve

IN CLOSE OPEN

5-5

5-4-5 H36C Pump Performance P-Q Characteristics

cc / rev 20

17.5

T = PD = 5.21 200π (kgfm) P3 = 10 kgf-cm2

Pump flow Q’ty

T = PD = 3.21 200π (kgfm) P3 = 175 kgf-cm2

100

200

Rated pressure P1 + P2

5-6

300 (kgf-cm2)

400 420

6 HYDRAULIC OIL FILTER CONTENTS 6-1 Installation 6-2 Hydraulic oil filter 6-2-1 Line filter (SP10) 6-2-2 Suction filter 6-2-3 Pilot filter 6-2-4 Line filter(SP08) 6-3 Maintenance procedure 6-3-1 Replacing the line filter 6-3-2 Replacing the suction filter 6-3-3 Replacing the pilot filter 6-3-4 How to clean the suction filter

6-1 Installation Line filter (SP08)

Line filter

Suction filter

Oil cooler

Pilot filter

6-1

6-2 Hydraulic oil filter 6-2-1 Suction filter

Grain size Filtration capacity Oil temperature

150 mesh 330 /min(Max) -20°C~120°C

6-2-2 Line filter

Filtration accuracy Filtration capacity Proof pressure Oil temperature

10µ 125 /min (Max.) 0.7 MPa -20°C~120°C

※ Opening pressure of bypass valve (other part) 0.15Mpa

6-2

6-2-3 Line filter(only P.T.O return) Filtration accuracy Filtration capacity Opening pressure of bypass valve Proof pressure Oil temperature Port size

10µ 125 /min (Max.) 0.103 MPa 0.7 MPa -20°C~120°C 2×PT1

Tightening torque 20 N.m

6-2-4 Pilot filter

PT 1/4

Tightening torque: 60~80 N.m

Filtration capacity

2 /min.(Max.)

Proof pressure

3.9 MPa

Filtration accuracy

31 µ

Filtration area

5 cm2

Oil temperature

-20°C~120°C

6-3

6-3 Maintenance procedure 6-3-1 Replacing the line filter 1. Stop the engine. 2. Remove the line filter 6-2-1 with a filter wrench. 3. Check whether any foreign matter is sticking inside the element. If necessary, replace the cartridge assembly. * In general, inspect and maintain line filters after the first 100 service hours, then every 500 service hours.

6-3-2 Replacing the suction filter 1. Stop the engine. 2. Remove the bolts and spring washers which retain the filter to the hydraulic oil tank, and pull off the filter. 3. Remove the suction filter to check whether the net of the element is damaged. * Replace with a new one if the net is damaged or the mesh is widened.

6-3-3 Replacing the pilot filter 1. Stop the engine. 2. Remove the pilot filter 6-2-3 with a spanner (27 mm(1.06â&#x20AC;?) width). 3. Remove the filter to check whether the net of the element is damaged. * Replace with a new one if the net is damaged or the mesh is widened.

6-3-4 How to clean the suction filter 1. Prepare a can with clean treated oil. Immerse the element in it. 2. Using a brush, wash out foreign matter sticking to the element. Use a hard brush if the element is heavily stained. 3. After cleaning, blow compressed air inside the strainer to blow off the treated oil. 4. While cleaning the element, check the hydraulic oil tank at the same time, remove any sediment inside the tank and rinse out the tank. 5. Attach pipes to install the filter to the tank. When installing the filter, fit the O ring in the flange side groove firmly so that hydraulic oil does not leak. 6. Add new hydraulic oil through the hydraulic oil intake. Total amount of hydraulic oil : 50.5

6-4

7 CONTROL VALVE CONTENTS 7-1 Specification 7-2 Disassembly and assembly 7-2-1 Replacing the O ring on the contact surface and each block assembly 7-2-2 Replacing the O ring on the Spool 7-2-3 Removing the load check valve 7-2-4 Replacing the relief valve assembly and the O ring 7-3 Structure of the relief valve 7-3-1 Main relief valve 7-3-2 Port relief valve 7-4 Precautions for handling 7-4-1 Handling 7-4-2 Installation 7-4-3 Operation

130.5

65±0.2

130.5

BUCKET

BOOM

TRAVEL

ARM

SWING

PTO

SLEW

DOZER

7-1 Specification

Port size P1, P2, P3, T1 T2 A1~A9, B1~B9

390

PF 1 / 2 PF 3 / 4 PF 3 / 8

P1 and P2 Main relief pressure P3 Main relief pressure A2, B2, A5, B5 Port relief pressure

20.6 MPa at 42 /min 17.2 MPa at 25 /min 23.5 MPa at 5 /min 7-1

1 18 SWING 19

25 P.T.O.

10 21 14

11 TURNING

12 DOZER

26 20 14

23 22

21 4 19

17 3

5 14

6 19

BOOM 17

BUCKET

DRIVE:R

9 19

15 DRIVE:L 19

ARM 17 27

1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15.

CONTROL VALVE ASS'Y OUTLET SECTION ASS'Y BLOCK ASS'Y BLOCK ASS'Y BLOCK ASS'Y SPACER SECTION ASS'Y BLOCK ASS'Y BLOCK ASS'Y BLOCK ASS'Y BLOCK ASS'Y BLOCK ASS'Y BLOCK ASS'Y INLET SECTION ASS'Y O-RING RELIEF VALVE ASS'Y

16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29.

7-2

RELIEF VALVE ASS'Y RELIEF VALVE ASS'Y ANTI-VOID VALVE ASS'Y O-RING SHUT OFF VALVE ASS'Y NUT O-RING NUT RELIEF VALVE ASS'Y O-RING MAT(A) MAT(B) BOLT NUT

17 18

2 5

19 7 4

20 (for Bucket) 21 22 (for Bucket) 23 (for Bucket) 28 (for Drive (R), (L))

8, 9, 10, 11 12, 13, 14 7 6

25 (for Arm)

5 26 (for Arm)

4 1

27 (for Arm) 28 (for Arm)

29 (for Arm)

FOR BOOM/BUCKET/SLEW DRIVE(R)(L)/SWING P.T.O./DOZER/ARM

1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16.

CAP CAP BOLT, SOCKET HEAD O-RING END, SPOOL SPRING SEAT, SPRING SPOOL SPOOL SPOOL SPOOL SPOOL SPOOL SPOOL SPOOL PLUG

17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32.

7-3

O-RING SPRING POPPET PLUG O-RING SPRING POPPET O-RING ORIFICE POPPET SPRING O-RING SPRING PLUG SEAT, SPRING SPOOL

7-2 Disassembly and assembly 7-2-1 Replacing the O ring on the contact surface and each block assembly 1. 2. 3. 4.

Loosen the nut of tie rod. Remove each block. Be careful not to damage the machine contact surface. When disassembled, it is recommended to replace the O rings on the contact surface. When assembling, clean the contact surface so that no dust sticks to the surface. Then attach the O ring and reassemble in the reverse order of the above procedure. When attaching the O ring, give grease to it. 5. Tighten nut temporarily. 6. After tightening, place them on their side. Pressing the inlet cover and end cover from above, check the level of the mounting legs and tighten the nut. The tightening torque of the tie rod nut is 24 N.m. While tightening them, check that the Spool of each block operates smoothly.

7-4

7-2-2 Replacing the O ring on the Spool 1. On the lever side 1) Remove the mounting screws (1) of the O-ring presser from the block. 2) Replace the backup ring (2) and O-ring (3). 3) When mounting the O-ring presser, be sure not to damage the O-ring. 2. On the cap side 1) Loosen the cap mounting screws (4) and remove the cap (5). Take out Spool (6) and replace O-ring (7) 2) Rinse the Spool and insert it in the body. 3) When installing the spring cap, be careful not to damage the O-ring. Tightening torque of the cap mounting screw is 9 N.m. 4 The Spool is replaced in the units of the block assembly. 5

72 6 2

3 Load check valve Load check spring

7-2-3 Removing the load check valve (For Drive (R), (L)) 1. Remove the load check spring and load check valve from the valve block. 2. Keep each load check valve in order so as not to confuse it with other valve block. 2. Clean the parts sufficiently before assembling them.

7-2-4 Replacing the relief valve assembly and the O-ring. 1. 2. 3. 4.

Remove the inlet section assembly and the relief valve. If necessary, replace the O-ring or the relief valve assembly. During installation, give grease to the O-ring. When the relief set, cap nut of adjusting screw and hexagon nut are loosened, always check relief set pressure using the pressure gauge. At this time, the relief set pressure and flow rate shall be conformed to the specification indicated on the page of external drawing. 5. When the relief valve assembly is removed, check whether the small hole on the center of relief piston is clogged with foreign matter. 7-5

7-3 Structure of the relief valve 7-3-1 Main relief valve 7

1 8 6

4 16 17

Part Cap nut Installation of the relief valve 15

1. 2. 3. 4. 5. 6.

14 11 10

Cap Plug Sleeve Main poppet Pilot sheet Pilot poppet

Tightening torque 30 N.m 70 N.m

7. 8. 9. 10. 11. 12.

Adjuster kit Pilot spring Spring O-ring Backup ring O-ring

10 11

13.O-ring 14.Name plate 15.O-ring (1B-P10) 16.O-ring 17.Backup ring

7-3-2 Port relief valve 9

Part Cap nut Installation of the relief valve

Tightening torque 30 N.m 70 N.m

4 5

1. 2. 3. 4. 5. 6.

13 12

Cap Plug Poppet poppet Piston Pilot poppet

7. 8. 9. 10. 11. 12.

Spring Pilot spring Adjuster kit O-ring Backup ring O-ring

7-6

13. 14. 15. 16. 17. 18.

Backup ring O-ring O-ring Wave washer Name plate O-ring (1B-P10)

7-4 Precautions for handling (Installation and operation should conform to the following items.) 7-4-1 Handling When handling and carrying valves, be careful neither to drop them nor bang the spool end and cap. When stocking a valve for a long time, plug each port to prevent dust and water from entering it.

7-4-2 Installation 1. Tighten the valve joints with the specified tightening torque. Be careful so that no unnecessary force acts on the valve through the piping. 2. Install the operation link so that the spool moves correct in the direction of shaft. 3. Be careful when welding near a valve, because the high temperature and spatter may damage the O ring of the spool and the dust seal. 4. Do not paint the spool. 5. Never remove the plug on each port to prevent dust from entering until piping work begins.

7-4-3 Operation 1. Before operation, check that the hydraulic circuit and the oil are both clean (cleanliness of hydraulic oil must be higher than the NAS12 class). 2. Keep the oil temperature between -20째C and 80째C. If the temperature falls below 0째C, warm up the machine. 3. Never raise the set pressure of the main relief valve and port relief valve beyond the specified set pressure. If the set pressure differs from the specified value, adjust it in the following manner. 1) Procedure for adjusting the main relief valve: a. Install a pressure gauge between the pump and control valve in the measuring position. If there is a mounting hole for the pressure gauge, use it. b. Raise the temperature of the hydraulic oil to 50 to 60째C and set the engine speed to the rated value. c. Operate the control lever to read the indication of the pressure gauge when cylinder reaches the stroke end. d. When raising the pressure, remove the cap nut and turn adjusting screw of the relief valve installed on the inlet section clockwise with an Allen wrench.

Relief valve pressure adjustment DOWN

Main relief valve

Approx. 17.7 MPa per rotation

Port relief valve

Approx. 15.7 MPa per rotation

e. Always lock the valve when it is set to the specified pressure. 7-7

8 JOYSTICK (PILOT VALVE) CONTENTS 8-1 Specification 8-2 Structure

20.4 19.5–1.5

10.2 5–1

3.0 2.5

3.5

35.7

3.02

30.8

3.0

Single-Operating Torque

2.52 2.14

2.0

1.91–0.15

1.78 1.34

1.0 0.49

1.0 –0.1 0

0.95

Secondary Pressure

1.1

0 6 6.5 7

30.6 25.7 21.8

20.4 18.2 13.7

10.2 9.7

Push-rod Stroke(mm) 0

86.5

Operating Angle

110

26.5 P

1 26° 26° 45°

8-1

3 2

Operating Torque(kgf-cm)

30.6

Double-Operating Torque

3.5

35.7

Operating Torque(Nm)

19°

Secondary Pressure(MPa)

25°

Secondary Pressure(kgf/cm2)

8-1 Specification

8-2 Structure 1

25 22 29

21 13

12 11

15 18 10

16 28

17 2

8 5

1. JOYSTICK VALVE ASSâ&#x20AC;&#x2122;Y 2. CASING 3. PORT PLATE 4. SEAL WASHER 5. O-RING 6. HEX. BOLT 7. SPRING PIN 8. BUSH 9. PLATE 10. SPOOL

11. PLUG 12. PUSH ROD 13. SEAL 14. O-RING 15. SPRING SEAT 16. WASHER 2 17. SPRING 18. SPRING 19. JOINT 20. CIRCULAR PLATE

8-2

21. ADJUSTING NUT 22. LOCK NUT 23. LEVER 24. KNOB 25. SPRING PIN 26. BUSH 27. CONNECTOR 28. HOUSING(4P) 29. BELLOWS

9 PILOT VALVE(1) (TRAVEL) CONTENTS 9-1 Specification 9-2 Structure

9-1 Specification

9-1

9-2 Structure 1 30 31 26

28 11 6

7 5 19 4 9 14

25 2 13

21 8

23 12 22

16 18 20 2

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

18 19 20 21 22 23 24 25 26 27 28 29 30 31

PILOT VALVE ASSâ&#x20AC;&#x2122;Y CASING CASING(DAMPER) COVER PLUG GREASE CAP PACKING O-RING O-RING O-RING ROD, PUSH SHIM SEAT, SPRING PISTON BALL, STEEL RO PLUG PLUG 9-2

O-RING SCREW, HEX., S.H.C SPOOL SEAT, SPRING WASHER SPRING SPRING SPRING CAM SHAFT BUSH CAM BALL, STEEL SET SCREW BELLOWS

10 PILOT VALVE(2) (SWING â&#x20AC;¢ PTO) CONTENTS 10-1 Specification 10-2 Structure

24(0.94")

10-1 Structure

50(1.97") 65(2.56")

80(3.1")

44.8(1.76")

10 10

84(3.3") 130â&#x20AC;&#x201C;0.2(5.1") 150(5.9")

Secondary pressure

Operating torque (kgf.cm) (N.m) 4.90 50

(MPa) (kgf-cm ) 4.90 50 4.41

4.41

3.92

3.42

2.94

2.45

1.96

1.47

0.98

0.49

A TP

0 0

Operating angle 10-1

(deg.)

Circuit diagram

10-2 Structure 1

26, 4

3 9, 10 25 15 13 19 5, 11 16 12 2

1 2 3 4 5 6 7 8 9 10 11 12 13

PILOT VALVE BODY COVER PUSHER SHIM CAM PIN BOOT SHIM SHIM SHIM SPUR HOLDER, SPRING

14 PLATE, NAME 15 SPRING, COMP 16 SPRING, COMP 17 BOLT 18 SCREW 19 WASHER 20 WASHER 21 SCREW 22 PIN, SPRING 23 STEEL BALL 24 O-RING 25 O-RING 26 PUSHER ASSâ&#x20AC;&#x2122;Y

10-2

11 PILOT VALVE(3) (DOZER) CONTENTS 11-1 Specification 11-2 Structure

11-1 Specification 76(3.0")

71(2.8")

50(1.97")

83(3.27")

140(5.2")

12 12

OGYO K. K.

100(3.9") 150(5.9")

Secondary pressure

Operating torque (kgf.cm) (N.m) 200 19.60

(MPa) (kgf-cm ) 4.90 50 4.41

180 17.64

3.92

160 15.58

3.42

2.94 2.89–0.15MPa (29.5–1.5kgf/cm2) 2.45

153(kgf/cm) 140 13.72 15N 137(kgf/cm) 120 11.76 13.4N

100

9.8

1.96

7.84

1.47

0.98 0.49–0.1MPa (5–1kgf/cm2) 0.49

77(kgf/cm) 5.88 7.6N 65(kgf/cm) 3.92 6.4N

1.96

Operating angle

11-1

(deg.)

A TP

11-2 Structure 1

23 26, 9 10

24 8

21 2, 3

25 7

6 OGYO K. K.

13 15, 18 5 4, 27

1 2 3 4 5 6 7 8 9 10 11 12 13 14

15 16 17 18 19 20 21 22 23 24 25 26 27

DOZER PILOT VALVE SHIM SHIM BODY SPOOL SPRING COMP SLEEVE COVER PUSHER PIN BOOT PLATE, NAME SPRING COMP CAM 11-2

SHIM BOLT BOLT WASHER WASHER SCREW SPRING PIN PIN STEEL BALL O-RING O-RING PUSHER ASS’Y BODY ASS’Y

12 SLEW MOTOR CONTENTS 12-1 Specification 12-2 Structure 12-3 Standard of maintenance 12-3-1 Slew bearing & slew case 12-4 Inspection and adjustment 12-4-1 Measuring the natural slew distance 12-4-2 Measuring the over slew distance after stopping 12-4-3 Measuring the required time for slewing

12-1 Specification P.C

2—M16

Direction of rotation (seen from the output shaft)

.D .2 10

222

242

25.5 25.5

111

Direction of rotation Oil inlet

13H7

7.5 R10

35 25 G1/4 (PP PORT)

Clockwise

Counterclockwise

Port

Port size

PF 3/8

Initial oil replace Second and later replace 83

G3/8 2—G 3 / 8 (DR. PORT) (A, B PORTS)

(99.5) 7

G3/8 (T PORT)

150

187 168 149.5

5 R

43 10

( 174)

283

(208)

( 127) ( 139) 150h8

Type Reduction Output torque Output speed Reduction ratio Hydraulic motor Capacity Maximum speed Flow rate Overload relief set pressure Pinion gear Module No. of threads Z Weight 12-1

Oil outlet

PCR-2B-10A-P-8565A 731 N.m 68 min-1 1 / 21.5 16.0 cm3 1,455 min-1 24 / min 15.7 MPa at 24 / min 5 12 34 kg

500Hr 1,000Hr

12-2 Structure 17 14

2 5 22

37 48

1 12

3639

44 41 38 38

55 58 57

45 68

70 66 70 59 60 69 54

1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24.

Body Carrier 1 Carrier 2 Pinion shaft A internal gear B1 gear B2 gear S1 gear S2 gear Needle Needle Ring seal O-ring Thrust plate 1 Thrust plate 2 Thrust washer 1 Thrsut washer 2 Pre-load collar Snap ring Bearing Bearing Oil seal Screw Pin

25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40. 41. 42. 43. 44. 45. 46. 47. 48.

Ring Ring 1 Ring 2 Body H Plate S Shaft Cylinder barrel Valve plate Piston Shoe Shoe holder Barrel holder Swash plate Retainer Pin Filter Spring C Bearing Bearing Snap ring Screw Spring pin Pin Pin 12-2

49. 50. 51. 52. 53. 54. 55. 56. 57. 58. 59. 60. 61. 62. 63. 64. 65. 66. 67. 68. 69. 70.

64 65

Brake piston Spring assâ&#x20AC;&#x2122;y Disk plate O-ring O-ring Relief valve Check valve Plug Spring O-ring Seat Retainer Poppet Piston Cap Spring Spacer O-ring O-ring O-ring O-ring Back up ring

62 67 63

12-3 Standard of maintenance 12-3-1 Slew bearing and slew case

M12×75 10.9 Tightening torque 120 N.m M16×45 10.9 Tightening torque 310 N.m

M12×75 10.9 Tightening torque 120 N.m

12-3

12-4 Inspection and adjustment 12-4-1 Measuring the natural slew distance 1. Position of the machine Maintain the hydraulic oil temperature at 50±5°C. Make a slope or use a sleeper to incline the machine by 12°. Set the attachment diagonally, put a weight (W) in the bucket (filling the bucket with soil), retract the arm cylinder to the minimum length, make the boom parallel to the slope and stop engine.

12°

2. Measurement Put a mark on the slew bearing outer race and the truck frame and measure the flow rate (deviation rate) of 3 minutes. (Moving distance of slew bearing outer race)Valid gear length Unit mm or less Standard value

Allowance

Weight (W) kg

30(1.2”)

60(2.4”)

125

12-4-2 Measuring the over slew distance after stopping Maintain the oil temperature at 50±5°C while the engine is running at full speed. Stretch the arm to the maximum length on a flat place. Make the boom joint pin (1) and arm bucket pin (2) put on a horizontal line, put a weight(W) in the bucket (filling the bucket with soil), slew the Machine by one turn and measure the over slew length (at bucket edge) after stopping. Unit : deg Standard value

Weight W (kg)

125 (1)

(2) W

12-4-3 Measuring the required time for slewing Extend the bucket cylinder to maximum length, empty the bucket and measure the required time for slewing 5 turns following the first turn. Unit : sec Standard value

Allowance

33±4

47 12-4

13 TRAVEL MOTOR CONTENTS 13-1 13-2 13-3 13-4

Specification Structure Handling the travel motor Measuring travel motor idling and travelling time 13-5 Inspection and adjustment

13-1 Specification

Drain port 297.5(11.7") 122.5(4.8") 70(2.8")

B port Pilot port

PCD 192(7.6")

P.C.D. 232(9.1")

A port

Direction of rotation (viewing from output axis) Direction Oil pouring Oil discharging of rotation port port B

Counterclockwise

RED

Clockwise

DR A B

Port A,B Pilot Dr

Port size PF1/2 PF1/4 PF1/4 Item

Output torque N.m

2666 -1

Output speed (min ) Reduction ratio

Hydraulic motor

Capacity cc / rev Working pressure MPa Output speed of hydraulic motor (min-1) Flow rate /min

Equivalent capacity cc / rev

38.2/56.9

Oil

1/40.6 23.6 / 15.7 20.6 1,553 2,311

Oil temperature(°C) Others

Reduction gear

Item

Filtering (µM) Lubricating oil Weight kg

37.4

13-1

958.2 / 637.4 ISO-VG46 -20~100 10 SAE-30-CD 700cc 43

13-2 Structure

1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30.

Body-1 Body-2 Shaft Cylinder barrel Valve plate Piston Shoe Shoe holder Barrel holder Swash plate Control cylinder Stopper ring Pin Spring C Retainer Spur Check valve Spring guide Sloop Shuttle spool Spling V1 Spring V2 Spring V3 Plug Plug Plug Choke Ring Bearing (6204) Bearing (6201)

31. 32. 33. 34. 35. 36. 37. 38. 39. 40. 41. 42. 43. 44. 45. 46. 47. 48. 49. 50. 51. 52. 53. 54. 55. 56. 57. 58. 59. 60.

O-ring (IB-G125) O-ring (IB-G100) Piston seal Piston seal O-ring (IB-P25) O-ring (IB-P14) O-ring (IA-P12.5) O-ring (IB-P8) O-ring (IB-P7) Oil seal Ball Snap ring (H-28) Screw (M10×25) Spring pin (5×12AW) Pin (h7 A8×15) Plug Choke Backup ring Body Cover Carrier l Carrier ll B1 gear B2 gear S1 gear S2 gear B1 pin B2 pin Seal ring Snap ring 13-2

61. 62. 63. 64. 65. 66. 67. 68. 69. 70. 71. 72. 73. 74. 75. 76. 77. 78. 79. 80. 81. 82. 83. 84. 85. 86. 87. 88. 89.

Thrust collar Floating seat O-ring Bearing Needle Needle Thrust washer Snap ring Snap ring (S-35) Snap ring (S-25) Snap ring (S-13) Spring pin (4×20AW) O-ring O-ring Plug Thrust washer Snap ring (S-30) Screw (M8×40) Plug O-ring (IB-P11) Name plate Pin (h7 B4×6) Thrust washer Block O-ring (IB-P28) Relief valve cartridge O-ring (IB-P15) Plug O-ring (IB-P12)

13-3 Handling the travel motor Add lubricating oil according to the following procedure. 1. The cover has three plugs. Turn the motor so the plugs are at right angle to the floor. Use them as the oil intake port, oil quantity check and oil drain ports, starting from the top in that order. Oil intake port(G 3/8) Oil quantity check port (G 1/8)

Oil drain port(G 3/8)

2. First, remove the plugs from the oil intake and oil quantity check port with an Allen wrench. 3. Add lubricating oil through the oil intake until the oil comes out of the intake port. 4. Plug the oil intake and oil quantity check port, then wind seal tape around the plug before tightening. Amount of lubricating oil

700cc

Schedule for replacing lubricating oil: First: After the first 200 service hours or 2 months Second and later times : Every 1,000 service hours or 1 year Standard maintenance Tightening torque Sprocket tightening torque Motor tightening torque

110 N.m 110 N.m

13-3

13-4 Measuring travel motor idling and travelling time 1. Idle crawler for ten turns and measure the required time. Unit : sec Standard value Low

14.2±0.8

High

9.5±0.8

(Engine running at full speed and oil temperature of 50±5°C)

2. After travelling 3m on ground level, measure the required time to travel 20m. Standard value Low

22.6±2

High

15.2±2

(Engine running at full speed and oil temperature of 50±5°C)

13-5 Inspection and adjustment 1. Measuring meander distance in travelling Measure the meandering distance by travelling on hard ground. Unit : mm or less Standard value

Max.

170(6.7”)

450(17.7”)

(Engine running at full speed and oil temperature of 50 ± 5˚C) 9.0 m (29.5 ft)

13-4

14 HYDRAULIC CYLINDER CONTENTS 14-1 Structure 14-2 Disassembly and assembly 14-2-1 Disassembly procedure 14-2-2 Procedure for disassembling inner parts 14-3 Assembly 14-3-1 Assembly procedure 14-3-2 Inspection procedure 14-3-3 Precautions for assembly

14-1 Structure

F K

Cylinder

Boom

Arm

Bucket

Swing

Dozer

ton

10.5

9.2

10.5

13.3

ton

7.2

5.9

7.2

9.2

Item Weight kg Trust Pushing force* Pulling A

Pin diameter (rod)

ø40 (1.6”)

ø35 (1.4”)

ø40 (1.6”)

Pin diameter (head) mm

ø40 (1.6”)

ø35 (1.4”)

ø40 (1.6”)

Rod diameter

ø45 (1.8”)

ø50 (2.0”)

Cylinder bore

ø80 (3.1”)

ø75 (2.9”)

ø80 (3.1”)

ø90 (3.5”)

Maximum extended length mm 1529 (60.2”) 1520 (59.8”) 1295 (51.0”)

1609 (63.3”)

595 (23.4”)

Maximum contracted length mm 920 (36.2”)

920 (36.2”)

795 (31.3”)

957 (37.7”)

470 (18.5”)

Stroke

609 (24.0”)

600 (24.0”)

500 (19.7”)

652 (25.7”)

125 (4.9”)

Clevis width

50 (2.0”)

G2 H

50 (2.0”)

Tightening torque

460

430

460

540

Tightening torque

N.m N.m

Tightening torque

N.m

900

780

900

1250

M30 × 1.5

M33 × 1.5

20.6

17.2

E F G1

Size of piston screw (size × pitch) *Main relief pressure MPa K

14-1

14-2 Disassembly and assembly 1

23 22

17 18

20 19

17 21

7 27

11 10

24 5 6 9 12

4 28 8

23 22 26

The illustration shows a boom cylinder. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10.

Cylinder assembly Tube Rod Rod cover Rod bush U-ring Retainer Wiper ring O-ring Backup ring

11. 12. 13. 14. 15. 16. 17. 18. 19. 20.

O-ring O-ring Cushion ring Spacer Stopper Piston Slide ring Seal ring assembly Steel ball Set screw 14-2

21. 22. 23. 24. 25. 26. 27. 28.

Cushion bearing Pin bush Dust seal Cylinder head assembly Piston assembly Rod packing assembly Piston packing assembly Packing assembly

14-2-1 Disassembly procedure 1. Hold the cylinder with the vice. Tighten the vice carefully; do not deform the cylinder. Blow air alternately from ports A and B and operate the piston rod to drain oil from the cylinder inside. To remove the piston, pull the piston rod about a third of the length.

A Hard wood Vice

2. Loosen and remove the rod cover from the cylinder tube assembly with a hook wrench.

Counterclockwise

Rubber or waist

3. Disassembling the piston rod assembly Slowly turn the piston rod assembly to remove it from the cylinder tube assembly. Place the removed piston rod assembly on a wooden bench or a waste to prevent damage.

Pull out

14-3

4. Disassembling the piston assembly Hold the piston rod assembly with a vice. â&#x20AC;˘ Put the waste between hard wood and the piston to prevent the surface sliding from being damaged. â&#x20AC;˘ Set the piston rod assembly on a level block so that it becomes parallel to the level block. Be careful because the piston rod assembly may come out of the vice and be damaged if it is set diagonally.

Hard wood

14-2-2 Procedure for disassembling inner parts 1. Remove the piston assembly from the piston rod assembly (after removing the set bolts). Then remove the cushion bearing in the direction of the arrow.

2. Disassembling rod cover Put piston rod assembly on a holding jig on the work bench. Make a working face for the rod cover assembly on the workbench and move the rod cover to and fro to remove it. Remove the backup ring then the O ring with a screwdriver. If they are to be reused, be careful not to damage them.

Holding jig

Packing case Backward Forward

3. Disassembling the packing assembly Remove the packing by prying it with an eyeleteer or a screwdriver. Be careful not to damage the groove of the cover and piston. Because it is difficult to remove the dust seal and rod packing without damaging them, remove them by inserting a eyeleteer or a similar tool and prying them out. Be careful not to damage the groove on the cover and piston. 4. Disassembling the piston rod and cylinder tube assembly As the bushes are pressed fit to the rod head, press them out with a pressing machine to remove them. For a spherical bearing, the snap ring must be removed first.

14-4

Press (example of a cylinder rod)

14-3 Assembly 14-3-1 Assembly procedure 1. The assembly procedure is the reverse of disassembly. 2. Before assembly, check whether metallic powder or other foreign matter is not sticking to any of the parts and whether the parts can be reused. 3. Coat hydraulic oil on each part before assembling them. 4. Assemble beforehand the parts into the following assemblies. • Cylinder tube assembly • Rod cover assembly • Piston rod • Piston assembly

14-3-2 Inspection procedure Clean each disassembled part with light oil or treated oil except for the packings. Packings are cleaned with petroleum hydraulic oil. Other types of oil will remarkably shorten the life of the packing. Thoroughly clean the sliding surface, oil hole, O ring, packing groove, etc. If the part is not used for a long time after being cleaned, execute a rust proof treatment. (Coating hydraulic oil is effective for rust prevention to a certain degree.) 1. Check all parts for flaws, cracks, deformation, rust, or burrs which may affect the operation. (Inside of the tube, rod, etc.) 2. Check each part for metallic powder or other foreign matter sticking to it. 3. Check the sliding surface of piston rod for damage, uneven abrasion, discoloring, or any defect which may affect its operation. 4. Packings and seals are usually replaced with new one. If you must reuse them, check that there are no tears, cuts or foreign matter sticking to the packing.

14-3-3 Precautions for assembly Assemble the cylinder while paying attention to the following matters. 1. Replace the packings with new ones before assembly. 2. Execute assembly work paying attention to the direction of cushion bearings (boom, arm, bucket and swing) and seal rings (arm and swing). 3. Replace the set bolts with new ones. In assembling, after tightening the set bolts, further tighten and firmly fix them by hitting with punch at two points on the periphery. 4. Tighten the rod cover, piston and nuts with a specified tightening torque shown in the attached table (page 14-1). 5. Check fully before starting assembly work. 14-5

15 SWIVEL JOINT CONTENTS 15-1 Specification and Structure 15-2 Structure, disassembly and assembly

15-1 Specification and Structure Working pressure

Port size

0.15 MPa

0.98 MPa

A~D, F, G

20.6 MPa

E~H

PF 1/4

A~D

PF 1/2

Working speed

10 min-1

*A to H and D rain denote the position of the port. A

100(3.9") 124(4.9") 110(4.3") 78(3.1")

73 (2.9")

G; Dozer F; Dozer E; Overdrive D; Travelling C; Travelling B; Travelling A; Travelling

H; Drain

15-1

15-2 Structure,disassembly and assembly 15

1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15.

11 2 16 4

Swivel joint assembly Cylinder Roter Plug Thrust washer Socket head bolt Cap Bolt Spring washer Knock pin Packing assembly O-ring Slipper seal O-ring Dust seal

5 13

Disassembly: 1. Remove bolt (8) and cap(7). 2. Remove the bolts (6) and thrust washer (5). 3. Remove the shaft (3) from the hub (2) upward. Because the shaft is tightened by the tension of the O ring, tap a hammer on the shaft by rotating it and pull it up. * Be careful so that O ring does not become trapped. Assembly: 1. Before assembly, check the O ring and sliding part for flaws and other defects. 2. Assembly is usually executed in the opposite order of disassembly. Coat a little hydraulic oil or grease on the O rings before assembly.

15-2

16 CRAWLER CONTENTS 16-1 Structure and operation 16-1-1 Crawler (Steel) 16-1-2 Track frame 16-2 Standard of maintenance 16-2-1 Crawler (Steel) 16-3 Disassembly and assembly 16-3-1 Installing the crawler 16-3-2 Removing the crawler 16-3-3 Track frame spring 16-3-4 Life of the rubber crawler 16-3-5 Handling the rubber crawler

16-1 Structure and operation

300 mm(11.8")

16-1-1 Crawler (steel)

101.6 mm(4.0")

1. 2.

Shoe Pin

16-1-2 Track frame 2 1

1. Idler 2. Track frame 3. Guard (for steel crawler) 4. Track roller 5. Spring

16-1

16-2 Standard of maintenance 16-2-1 Crawler (steel) 1

2 4

Standard value

Allowance

101.6(4.0”)

104(4.1")

61(2.4")

58.5(2.3")

Measure by stretching 5 links except for the master link Pad or replace

16.5±1.5(0.6”±0.06”)

7(0.3")

Pad or replace

Pin clearance

0.33(0.012”)

2(0.08")

Replace

Bush outer diameter

32.2(1.26")

29(1.14")

Replace

No.

Item

Link pitch

Link height

Grouser height

4 5

Unit

16-2

Remarks

16-3 Disassembly and assembly 16-3-1 Installing the crawler 1. Crawler After the sprocket put on the crawler (2), drive motor to bring it above the idler and for steel crawler, fix the master pin (3) into the hole. For a rubber crawler, the crawler by using the idler as it is. Install steel bar and heavy duty hammer into the undercarriage.

3 2

2. Tension the crawler Tighten the cartridge valve (1) of the adjust cylinder, grease and adjust the tension.

Steel: 25 to 35 mm(1.0"~1.4") Rubber: 10 to 15 mm(0.4"~0.6")

16-3

16-3-2 Removing the crawler 1. Loosen the crawler. By loosen the cartridge valve (1) of the adjust cylinder, drain grease and loosen the crawler (2).

2. Crawler 1) Lift the main frame with attachment and put blocks under to lift the machine. 3

2) Turning in the direction of the idler side, remove crawler master pin (3) and then the crawler (2) from track frame. Weight (steel crawler): 364 kg (182Ă&#x2014;2)

3) As rubber crawler is endless and of solid material, push the idler to the end and remove the rubber crawler by using steel bar from the idler. Weight (rubber crawler): 314 kg (157Ă&#x2014;2)

16-4

16-3-3 Track frame spring

No.

Item

Deformation of frame

Distance between upper and lower faces of idler guide

3 4

Distance between left and right faces of idler guide Spring (free length)

Unit: mm Remedy

Standard Allowable limit Bend 5 (0.2") (Overall length of track frame) Correct 10 (0.4") (Twist between left and Twist right crawler frames) Opening of idler 5 (0.2") Standard value Allowable limit +0.04 2-1 Track frame 126+1.0 131 (5.2”) -0 (5.0” -0 ) +0 +0 2-2 Idler frame 124 -0.5 (4.9” -0.02 ) 119 (4.7”) +0.04 +1.0 3-1 Track frame 166 -2.0 (6.5” -0.08 ) 171 (6.7”) 3-2 Idler support 162±1.0(6.4”±0.04”) 157 (6.2”) Standard value Allowable limit Set length 203.5 (8.0”)

16-5

Pad or replace

Replace Replace

16-3-4 Life of the rubber crawler Abrasion loss (mm) 20

Standard life

al er n Ge

Lan

ret

urf

dsc

ng api

(so

il)

0 500

1000

1500

2000

2500 3000 Service hours (H)

Check the remaining life of the rubber crawler by the abrasion loss in the rubber crawler height as shown in the figure below. Note that the life slightly differs depending on the conditions of site and the operation of the machine.

28(1.1")

25(0.98") 37.5(1.5") 25.5(1.0")

25(0.98")

PRECAUTIONS: (1) Wipe immediately if fuel or hydraulic oil sticks to rubber crawler. (2) Check that there are no sharp edges protruding on the ground. (3) Avoid using on beach. (This may affect the adhesion of the core metal.) (4) If the machine is going to be stored for a long time, never store it where it will be directly exposed to sunlight.

Center of rubber crawler steel core 300(11.8")

(pitch) 52.5(2.1")

Description Value Total length of rubber crawler 4,510±12(178"±0.5") Steel cord Tension 800 kg / piece Steel cord No. of cords 40±4 Range of working temperature -25°C~55°C Width × pitch 300×52.5

16-6

16-3-5 Handling the rubber crawler 1. Do not run over or turn on a sharp edge If you run over or turn on a projecting sharp edge or a stepped grade, the machine will partially load on the rubber crawler and split it or cut the threads of the rubber crawler and the inner steel cord. 2. Prevent foreign matter from entering the rubber crawler Foreign matter will strain the crawler and cut it. 3. No sharp turns Do not turn sharply on a road with a high-friction factor (such as a concrete road). 4. Keep oil products away from the rubber crawler If you spill fuel or hydraulic fluid on the rubber crawler, clean it promptly. 5. Protect from salt Do not operate on beach (Core metal will rust due to salt corrosion). 6. Store indoors If the machine is not used for a long time, keep it indoors to prevent exposure to direct sunlight and rain.

16-7

17 SPRING CASE AND GREASE CYLINDER CONTENTS 17-1 Structure 17-2 Specification of spring 17-3 Disassembly and assembly 17-3-1 How to disassemble and assemble the ad just cylinder 17-3-2 How to disassemble and assemble the spring case

17-1 Structure 1

10 11

1. 2. 3. 4. 5. 6. 7.

Plate Cylinder Spring Rod O-ring (IB-P40) Backup ring (T2-P40) Dust seal (DKR-40)

8. 9. 10. 11. 12. 13.

Spacer Snap ring (H-52) Cartridge valve Grease nipple (PT1/8-A) Castle nut Split pin

17-2 Specification of spring

ø I.D.

P.C.D.

ø O.D.

Set length L L0

Name No. of active coils Total number of coils Spring constant (kgf/mm) Set force (kg) Force at max. shrinkage (kg ) Lo Free length (mm)

Value 7.5 9 50.9 (2.0”) 2,698 4,650 286.5(11.3")

Name Length at max. shrinkage (mm) ø O.D. (outer diameter)(mm) P.C.D. (Center diameter) (mm) øI.D. (Inner diameter) (mm) Wire diameter d (mm) L set length (mm) 17-1

Value 195.1(7.7") 107(4.2") 85(3.3") 63(2.5") 22(0.9") 233.5(9.2")

17-3 Disassembly and assembly

1. 2. 3. 4. 5. 6. 7.

O-ring (IB-P30) Cylinder Backup ring (T2-P40) Rod Scraper (DSI) Backup ring (T2-P40) Castle nut

8. 9. 10. 11. 12. 13. 14.

Spacer Split pin Cartridge valve Spring Castle nut Split pin Idler yoke

Cylinder effective stroke: 150 mm(5.9")

17-3-1 How to disassemble and assemble the adjust cylinder 1. Disassembly a. Remove the cartridge valve from the adjust cylinder rod. b. Remove the cylinder rod from the adjust cylinder tube. c. Remove the snap ring, spacer, dust seal, backup ring and O-ring. 2. Assembly The assembly procedure is the reverse of the disassembly procedure. a. Attach the O-ring, backup ring and spacer to adjust cylinder tube. *Coat grease on the O-ring and dust seal before assembly. b. Attach the adjust cylinder rod to adjust the cylinder tube carefully so that the seals are not damaged. Apply grease before hand in the adjust cylinder tube. Attach the cartridge valve to the adjust cylinder rod so that the screw on the second step reaches the tapped hole. When attaching the adjust cylinder rod, tighten the cartridge valve after checking that grease comes out of the grease drain hole. Note: â&#x20AC;˘ Adjust and assemble carefully so that air does not remain in the adjust cylinder tube. â&#x20AC;˘ Coat grease on the piston of the cylinder tube rod before assembly. Tightening torque of the cartridge valve: 187 to 210 N.m 17-2

17-3-2 How to disassemble and assemble the spring case 1. Disassembly Lower the spring force between the front idler and adjust cylinder tube using a pressing machine and the special purpose tool. a. Remove the castle nut for the mounting spring. b. Remove the spring from adjust cylinder tube. Note: â&#x20AC;˘ Be careful when using the tool when removing the spring. Also, be careful during assembly. 2. Assembly The assembly procedure is the reverse of disassembly. Attach the spring to adjust cylinder tube using the special tool and set the spring to the specified position with the castle nut. After adjustment, completely bend the split pin. Spring set length: 233.5mm(9.2")

17-3

18 IDLER CONTENTS 18-1 Standard of maintenance 18-1-1 Idler

18-1 Standard of maintenance

18-1-1 Idler

3 4

No. Item Outer diameter of 1 projected part 2 Outer diameter of tread 3 Width of projected part 4 Overall width 5 Width of tread 6 Quality of lubricating oil

Unit

Standard value

Allowance

ø311(12.2”)

ø307(12.1”)

Pad or replace

mm ø269 (10.6”) mm 25 (1.0”) mm 65 (2.6”) mm 20 (0.8”) cc 80

ø265 (10.4”) 21 (0.8”) 60 (2.4”) 24 (0.9”)

Pad or replace Pad or replace Pad or replace Pad or replace Gear oil or engine oil

18-1

Remark

19 SPROCKET CONTENTS 19-1 Disassembly and assembly 19-1-1 Removing the sprocket 19-1-2 Installing the sprocket 19-2 Standard of maintenance 19-2-1 Sprocket

19-1 Disassembly and assembly 19-1-1 Removing the sprocket

1. Crawler Refer to the explanation on crawler removal. 2. Sprocket Remove sprocket mounting bolts (1) and then sprocket (2) from the travelling motor assembly.

19-1-2 Installing the sprocket

1. Sprocket Attach the sprocket to travelling motor assembly and tighten the mounting bolts (1). Tightening torque:100 N.m~110 N.m (72.3~80 lbft) 2. Crawler Refer to the explanation of crawler installation.

19-1

19-2 Standard of maintenance 19-2-1 Sprocket

4 3

No. 1 2 3 4

Item

Unit

Standard Allowance value

Remarks

Width of sprocket teeth Minor diameter of sprocket Tightening torque of sprocket mounting bolt

mm 25(1.0") 19(0.07") Pad or replace mm ø313.8(12.4")ø305.8(12.0") Pad or replace Tighten some more. — N.m 100~110 (M10 P1.5)

Tightening torque of motor mounting bolt

N.m 100~110

19-2

—

Tighten some more. (M10 P1.5)

20 TRACK ROLLER CONTENTS 20-1 Standard of maintenance 20-1-1 Track roller

20-1 Standard of maintenance 20-1-1 Track roller

4 3

5 7

6 8

No.

Item

Unit

Standard Allowance value

ø115(4.5”)

Outer diameter of projected part

2 3 4 5 6 7 8

Outer diameter of tread mm Width of projected part mm Overall width mm Width of tread mm Roller side clearance mm Tightening torque for mounting roller N.m Quantity of lubricating oil cc

—

Remarks Pad or replace

ø95(3.7”) ø92(3.6”) Pad or replace 24(0.9") 21(0.8") Pad or replace 108(4.3") — Pad or replace 42(1.7") — Pad or replace 0.2±0.1 1.5(0.06”) Replace bush 325 Tighten some more.(M24 P3) 100 Gear oil or engine oil

20-1

21 CARRIER ROLLER CONTENTS 21-1 Standard of maintenance 21-1-1 Carrier roller

21-1 Standard of maintenance 21-1-1 Carrier roller

2 5

4 3

No. 1 2 3 4 5

Item Outer diameter of projected part

Unit

Standard value

Allowance

Remarks

ø76 (3.0”)

ø73 (2.9”)

Pad or replace

Overall width mm 100 (3.9”) — Roller side clearance mm 0.2±0.1 (0.008”±0.004”) 1.5 (0.06”) Tightening torque for N.m 22 mounting roller Quantity of lubricating oil cc 70

21-1

Pad or replace Replace bush Tighten some more. (M8 P1.25) Gear oil engine oil

22 ELECTRICAL EQUIPMENT CONTENTS 22-1 Structure and function 19-1-1 Electric circuit diagram 22-2 Failure and remedy 22-2-1 Starter system 22-2-2 Alter nator system

22-1 Structure and function 22-1-1 Electric circuit diagram

22-1

22-2 Failure and remedy 22-2-1 Starter system Failure

Cause

Remedy

- Disconnection of the wire harness, loose connection of the battery or switch terminal. - Spline which engaged with the pinion of armature shaft is caught and the pinion cannot move. - Malfunction of the plunger of magnetic switch, disconnection or the short-circuit of coil

Reconnect and tighten connections.

- Disconnection of the cable between the battery and the magnetic switch, loosening (bad earth) of the connecting wire between magnetic switch and motor terminals - Improper engagement of pinion and ring gear - Wrong installation - Brush is worn out or brush spring is touching. - Commutator is dirty. - Malfunction of armature or field coil - Loosening of field coil and brush - Loose connection of contractor - Contact surface of contractor is rough.

Reconnect cable, tighten connections (make good earth).

Starter rotates at its full speed before the pinion engages with the ring gear.

- Wrong adjustment of plunger gap (distance l) - Permanent set of pinion sleeve spring.

Adjust

Engine does not start even when the pinion engages with the ring gear and the starter rotates.

- Malfunction of overrun clutch

Replace

Starter does not stop even when starter switch is turned off.

- Short-circuit inside switch - Contractor drops and is always connected.

Replace switch Replace

Pinion does not come out even when the starter switch is pressed.

Starter does not rotate even when the pinion engages with the ring gear.

22-2

Free the spline Correct or replace

Correct the engagement. Reinstall Replace or adjust. Clean commutator. Correct or replace Tighten coil and brush. Tighten connections. Correct or replace

Replace

22-2-2 Alternator system Failure

Cause

Remedy Reconnect cord-tighten connections.

Cannot be charged.

- Cords between terminals are disconnected or connectors are in loose connection. - Improper earth conection - Brush and slip ring do not contact. - Coil is disconnected or burnt. - Diode is damaged.

Tighten connections.

Insufficient charge

- Loose connection of cords between each terminal - Fan belt slips. - Improper contact or insufficient movement of brush and slip ring - Short-circuit of coil - Defective diode

Overcharge

- Defective alternator

Replace

Noise

- Wrong installation - Defective fan belt - Defective bearing

Connect. Replace. Replace.

- Diodes on (+) and (-) sides broke down. - Capacitor broke down. - Alternator internal short-circuited

Replace.

Fuse melts.

22-3

Make good earth conections. Connect or replace Replace Replace

Adjust. Clean slip ring and brush holder. Replace Replace

23 TROUBLESHOOTING CONTENTS 23-1 Troubleshooting

23-1 Troubleshooting 23-1-1 All functions not operational Check the level of HYD. oil.

If not enough

Pumps or couplings faulty.

Disassemble, check

Fill up with HYD. oil.

Replace pump Ass'y or couplings.

23-1-2 Operation power is weak Check the level of HYD. oil.

If not enough

Fill up with HYD. oil.

OK Abnormal noise occur from pump.

Yes

Check the level of HYD. oil flow from pump.

Flow low

Intake system faulty.

Clean up suction filter. Repair faulty piping part.

HYD. oil has bubbles in it.

Check cause of bubbles and remove it.

Large internal leak on pump.

Deterioration of the HYD. oil

Check the pressure on main relief valve.

Faulty pump

Pressure incorrect

Relief valve faulty adjustment.

Faulty relief valve.

Large internal leak on control valve.

Replace pump Ass'y.

Replace HYD. oil.

Adjust to correct pressure. Clean, disassemble, adjust or replace Ass'y.

Replace Ass'y.

23-1

23-1-3 No operation on boom, arm, bucket & slewing Check set condition of safety lock lever.

Reset or adjust limit switch.

Check the wiring, short circuit of FUSE BOXLIMIT SWITCHSOLENOID VALVE.

Faulty

Refit wiring.

Fuse has blown.

Replace fuse.

Check the action of limit switch or solenoid valve. OK

Check the set pressure on pilot port.

Faulty

Check the pressure Incorrect Replace HYD. pump and seals. on pump No.3 OK

Check the pilot filter.

Faulty

Check control valve and inner parts of pilot system.

If it is faulty spool sticking, then flush out or replace. If the spring is weak, then replace.

Blocked up with contamination of pilot filter.

Clean or replace.

Check the action of joystick.

Faulty

Clean or replace.

Check parts of each port on control valve.

Clean or replace control valve.

23-2

23-2 Travelling system 23-2-1 Right (or left) hand side of crawler does not work correctly Faulty

Check the spool stroke.

Check the link system. Faulty

Adjustment or replace.

Faulty linkage.

OK OK

Replace seals or block Ass'y.

Faulty action on spool.

Check the travelling for both(forward, backward)directions.

Problem changed to opposite direction

Only one direction

Internal leak on swivel joint.

Change over valve section port Aâ&#x2021;&#x201D;port B Faulty

Counter balance valve is faulty.

No travelling in either direction

Replace seals or Ass'y.

Check plunger, repair or replace Ass'y. Replace or change over the relief valve with the other pump's port and then test.

Low pressure

Faulty relief valve. Contamination

Faulty

Check the action of the relief valves.

Action faulty (does not relieve pressure)

Adjust to correct pressure or replace relief valve. Disassemble, clean or replace.

Replace pump Ass'y.

Pump was faulty.

Action OK (relieves pressure)

Faulty drive motor.

Check the counter balance valve.

Faulty

Check plunger, repair or replace Ass'y.

Drive motor broken.

23-3

Replace motor Ass'y.

23-2-2 Travelling meander by slow speed on only right (left) hand side. Yes

Is the meander distance within tolerance?

Check the tension of crawler and check for the foreign matter present.

Remove any foreign matter and re-adjust to correct tension.

Faulty

OK Faulty

Check the spool stroke.

Check the link system. Faulty

Faulty linkage. OK

Change over the outlet hoses No. 1,2 pumps, then test travelling.

Adjustment or replace. Replace seals or block Ass'y.

Faulty action on spool.

Problem changed to opposite direction

Replace pump Ass'y.

Faulty pump.

Nothing changed

Change over the relief valves right to left and test travelling.

Problem changed to opposite direction

Faulty relief valve.

Nothing changed

Change over the hoses from swivel joint to drive motor L/H to R/H, then test travelling.

Low pressure

Contamination Problem changed to opposite direction

Internal leak on swivel joint.

Adjust to correct pressure or replace relief valve. Disassemble, clean or replace. Replace seals or Ass'y.

Nothing changed

Faulty drive motor.

Check the counter balance valve.

Faulty

Check plunger, repair or replace Ass'y.

Internal wear or breakage.

23-4

Repair or replace.

23-2-3 Machine fails to hold on incline If you can see any movement (outside tolerance). Problem

Replace counter balance solved valve (brake valve).

Nothing changed Problem solved

Replace drive motor.

Faulty counter balance valve.

Replace counter balance valve.

Faulty drive motor.

Replace drive motor Ass'y.

23-5

23-3 Slewing system 23-3-1 No operation both (right/left) slewing. Check the function of slewing operation system (dozer, swing).

Faulty

Change over relief valves to the other pump port, then test. OK

Low pressure

Adjust to correct pressure or replace.

Faulty relief valve. Relief valve is sticking

Disassemble, clean or replace. Faulty OK

Change over outlet hoses to pump No.1's or No.2's, then test. OK

Faulty

Faulty pump.

Replace seals or pump Ass'y.

Faulty control valve.

Replace valve or Ass'y.

Not relieving

Is slew motor relieving or not? It is relieving

Test slew when push bucket by hand.

Spool is sticking.

Replace seals or valve block.

No resistance

Faulty slew relief valve.

Disassemble, clean or replace.

It has resistance

Take the slew motor off.

Check the pinion gear on slew motor and (also) bearing gear. OK

Check slew when push bucket by hand.

Gear is damaged

Replace pinion gear or slew bearing.

Not turning

Seized slew bearing, etc.

It can be turned

Replace slew bearing. Disassemble, repair or replace slew motor Ass'y.

Faulty slew motor.

23-6

23-3-2 It is possible to turn right (left) but not left (right)

Lever moved to left (right).

Not relieving

Change over control valve pilot port Aâ&#x2021;&#x201D;B, then test. OK

Problem changed to opposite direction

Check the relief valve on turning, relieving or not.

Faulty control valve block.

Replace inner parts or valve block.

Faulty joystick.

Repair or replace joystick Ass'y.

It is relieving

Faulty relief valve.

Clean or replace.

23-3-3 Turning acceleration slow, the overturn is higher than tolerance Yes

Is the distance under tolerance?

Above tolerance Low pressure

Check the turning circuit pressure.

Faulty relief valve.

Clean or replace.

Replace turning motor Ass'y.

Internal leak on turning motor.

23-7

23-3-4 Extreme slow slew speed Does the turning speed meet the specified speed?

Yes

Slow

Check the action of the turning operation system (dozer, swing).

Check the slew circuit pressure. OK

Faulty

Change over relief valves to the other pump port or replace, then test.

Low pressure

Faulty relief valve.

Clean or replace.

Low pressure

Adjust to correct pressure or replace.

Relief valve is sticking

Disassemble, clean or replace.

Faulty

Change over outlet hoses to pump No.1's or No.2's, then test.

Internal leak on slew motor.

Faulty

Faulty control valve.

Replace valve or Ass'y.

23-3-5 Turning movement when the machine is parked on a slope Yes

Is the distance lower than tolerance?

Check the slew pressure.

Low pressure

Faulty relief valve.

Clean or replace.

Internal leak on slew motor.

Replace motor Ass'y.

23-8

23-4 Boom system(for arm and bucket cylinders the same method as follows) 23-4-1 No movement on boom cylinder Does

Check the movement move Change over boom section of boom for both port Aâ&#x2021;&#x201D;port B directions. OK

Disassemble, replace seals or replace.

Faulty port relief valve.

Does not move Faulty

Replace inner parts or Ass'y.

Faulty joystick.

Check the function of Faulty Change over relief valve boom operation to the other pump's port system (bucket, right or replace, then test. Low hand travelling). OK

pressure

Faulty relief valve.

Adjust to correct pressure or replace relief valve.

Relief valve is sticking

Disassmble, clean or replace. Faulty

Change over outlet hoses from the other pump, then test.

Faulty pump.

Disassemble, replace seals, or replace relief valve.

Faulty control valve.

Replace valve block Ass'y.

Faulty

Check the inner parts of control valve.

Faulty

Breakage on inside of cylinder. OK

Replace inner parts or cylinder Ass'y.

23-9

If it is a sticking spool, then clean or replace. If spring is weak, then replace.

23-4-2 Slow action or lack of power on boom cylinder Correct

Check the cylinder working speed.

Slow

Are the directions slow (lack of power)?

Change over relief valve port Aâ&#x2021;&#x201D;port B OK

OK Faulty

Check the action on boom operation system (bucket, right hand travelling).

Faulty

Faulty relief valve.

Adjust to correct pressure or replace relief valve.

Faulty joystick.

Replace inner parts or Ass'y.

Change over relief valve to the other pump port or replace, then test. OK

Low pressure

Faulty relief valve. Relief valve is sticking

Adjust to correct pressure or replace relief valve.

Disassemble, clean or replace. Faulty

Change over outlet hoses from the other pump, then test.

Disassemble, replace seals, or replace pump Ass'y.

Faulty pump. Faulty

Check the inner parts of control valve.

Faulty control valve.

Faulty

Breakage on inside of cylinder. OK

Replace inner parts or cylinder Ass'y.

23-10

Replace valve block Ass'y. If it is sticking spool, then clean or replace. If spring is weak, then replace.

23-4-3 Natural fall of boom Check the fall is within tolerance.

Yes

Change over relief valve boom cyl.â&#x2021;&#x201D;bucket, then check.

Faulty

Internal leak on boom cylinder.

Replace inner parts or cylinder Ass'y.

Internal leak on control valve (spool).

Replace valve block Ass'y.

Check the internal leak on control valve. Change over hoses Faulty boom section Aâ&#x2021;&#x201D; boom section B. OK

Disassemble, clean or replace.

Faulty port relief valve.

23-11

23-5 Swing system 23-5-1 No movement on swing system Operation on just one direction.

Yes

Faulty suction valve.

Clean or replace.

Check the function of swing operation system (dozer, slewing).

Faulty

Replace or change over the relief valve with the other pump's port and then test. Change over the outlet hoses No.2, 3 pumps and then test.

Faulty

Faulty control valve.

Replace valve block Ass'y or control valve Ass'y.

Faulty pump.

Replace pump Ass'y or disassemble and replace seals.

Low pressure

Faulty relief valve. Contamination Faulty

Check the spool stroke.

Adjust to correct pressure or replace relief valve. Disassemble, clean or replace.

Check the link system. Faulty

Faulty linkage.

Faulty action on spool.

Broken parts inside the swing cylinder.

Adjustment or replace. Replace block Ass'y or seals. Replace inner parts or cylinder Ass'y.

23-5-2 Drifting swing cylinder Air leaking out of swing cylinder. Check internal leak on control valve. Change over hoses, then test.

If OK

Not working properly

Internal leak on control valve.

Replace block Ass'y or Ass'y. Otherwise clean or replace the suction valve.

Internal leak on swing cylinder.

Replace inner parts or Ass'y.

23-12

Hanix Europe Limited Unit B Alliance Ind Estate Windmill Lane, Denton Manchester, M34 3SP United Kingdom Tel: +44 (0)161 335 2330 Fax: +44 (0) 161 335 2349 Email: sales@hanixeurope.com Website: www.hanixeurope.com H36CSM0409

H36C

Purchased From T.M. Manuals

Parts Catalogue Japanese Craftsmanship Please DO NOT Make Copies Of This Manual

H36C PARTS CATALOGUE

Purchased From T.M. Manuals

CONTENTS

RADIATOR Gp ....................................................................................................................... 4-04 INNER ELEMENT Gp-AIR CLEANER ................................................................................... 4-50

1. SWING Ar.

FRAME Gp-SWING................................................................................................................ 1-01 TANK Gp-FUEL....................................................................................................................... 1-02 TANK Gp-HYD........................................................................................................................ 1-03 HOOD & COVER Gp.............................................................................................................. 1-04 WIRING Gp............................................................................................................................. 1-05 LINES Gp-FUEL...................................................................................................................... 1-06 WEIGHT Gp............................................................................................................................ 1-07 LINES Gp-GREASE................................................................................................................ 1-08 KEY PLATE Gp....................................................................................................................... 1-09

2. WORK Ar.

POST Gp-SWING................................................................................................................... 2-01 BOOM Gp............................................................................................................................... 2-02 ARM Gp.................................................................................................................................. 2-03 LINKAGE Gp-BRACKET......................................................................................................... 2-04 COVER Gp-BOOM................................................................................................................. 2-05 LAMP Gp-BOOM..................................................................................................................... 2-06 BUCKET Gp............................................................................................................................ 2-50 PIN Gp-BUCKET..................................................................................................................... 2-51 ARM Gp-LONG....................................................................................................................... 2-52

3. CHASSIS Ar.

FRAME Gp-UNDCRG............................................................................................................. 3-01 BEARING Gp-SWING............................................................................................................. 3-02 IDLER Gp................................................................................................................................ 3-03 ADJUSTER Gp....................................................................................................................... 3-04 TRACK Gp.............................................................................................................................. 3-05 CARRIER Gp.......................................................................................................................... 3-06 SPROCKET Gp....................................................................................................................... 3-07 DOZER Gp.............................................................................................................................. 3-08 COVER Gp-DOZER................................................................................................................ 3-09 CRAWLER Gp-RUBBER........................................................................................................ 3-50 CRAWLER Gp-STEEL............................................................................................................ 3-51

4. ENGINE & RADIATOR Ar.

PUMP Gp................................................................................................................................ 5-01 MOTOR Gp-SLEW.................................................................................................................. 5-02 SWIVEL Gp............................................................................................................................. 5-03

MOTOR Gp-TRAVEL ............................................................................................................. 5-04 VALVE Gp-CONTROL . ......................................................................................................... 5-05 VALVE Gp-JOYSTICK .......................................................................................................... 5-06 VALVE Gp-PILOT . ................................................................................................................. 5-07 VALVE Gp-DOZER ................................................................................................................ 5-08 MANIFOLD Gp-PTO .............................................................................................................. 5-09 CYLINDER Gp-BOOM ........................................................................................................... 5-10 CYLINDER Gp-ARM ...............................................................................................................5-11 CYLINDER Gp-BUCKET ....................................................................................................... 5-12 CYLINDER Gp-SWING . ........................................................................................................ 5-13 CYLINDER Gp-DOZER ......................................................................................................... 5-14 LINES Gp-PUMP ................................................................................................................... 5-15 LINES Gp-COOLER & RETURN ........................................................................................... 5-16 LINES Gp-PILOT ................................................................................................................... 5-17 LINES Gp-FRONT ................................................................................................................ 5-18 LINES Gp-BOOM SWING . ................................................................................................... 5-19 LINES Gp-BOOM . ................................................................................................................ 5-20 LINES Gp-ARM . ................................................................................................................... 5-21 LINES Gp-BUCKET .............................................................................................................. 5-22 LINES Gp-PTO ..................................................................................................................... 5-23 LINES Gp-SLEW . ................................................................................................................. 5-24 LINES Gp-TRAVEL ............................................................................................................... 5-25 LINES Gp-DOZER ................................................................................................................ 5-26 LINES Gp-PILOT J/S ............................................................................................................ 5-27 SHUTOFF Gp-PTO ............................................................................................................... 5-50 VALVE Gp-J/D . ..................................................................................................................... 5-51 LINES Gp-J/D ....................................................................................................................... 5-52 LINES Gp-PTO, LONG ......................................................................................................... 5-53 LINES Gp-BUCKET, LONG .................................................................................................. 5-54

6. OPERATOR Ar.

ENGINE Gp............................................................................................................................. 4-01 MOUNTING Gp-ENGINE........................................................................................................ 4-02 CLEANER Gp-AIR.................................................................................................................. 4-03 PAGE 2

5. HYDRAULIC Ar.

PLATFORM Gp ..................................................................................................................... 6-01 FIREWALL Gp . ..................................................................................................................... 6-02 SEAT Gp ............................................................................................................................... 6-03 CONSOLE Gp-LH ................................................................................................................. 6-04

Please DO NOT Make Copies Of This Manual

PAGE 3

H36C PARTS CATALOGUE

Purchased From T.M. Manuals

CONSOLE Gp-RH ................................................................................................................ 6-05 CONTROL Gp-TRAVEL ........................................................................................................ 6-06 CONTROL Gp-SWING ......................................................................................................... 6-07 CONTROL Gp-PTO .............................................................................................................. 6-08 CONTROL Gp-GOVERNOR . ............................................................................................... 6-09 DOZER LEVER Gp ............................................................................................................... 6-10 HAND REST Gp . ...................................................................................................................6-11 SUPPORT Gp-SEAT ............................................................................................................. 6-12 FLOOR PLATE Gp ................................................................................................................ 6-13 CABIN Gp ............................................................................................................................. 6-50 HEATER PIPING Gp ............................................................................................................. 6-51 CANOPY Gp ......................................................................................................................... 6-52 COVER Gp-SEAT BOX . ....................................................................................................... 6-53 SEAT Gp-SLIDING . .............................................................................................................. 6-54

SWING Ar.

7. MISCELLANEOUS Ar.

LABEL Gp-MODEL ............................................................................................................... 7-01 TOOL Gp . ............................................................................................................................. 7-03 LABEL Gp ............................................................................................................................. 7-04 LABEL Gp-CAB . ................................................................................................................... 7-50

9. ATTACHMENT Ar.

RADIO Gp-USA . ................................................................................................................... 9-01 RADIO Gp-EU . ..................................................................................................................... 9-02

10. INDEX

PAGE 4

Please DO NOT Make Copies Of This Manual

PAGE 5

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

FRAME Gp-SWING S011-00025

FRAME Gp-SWING

1-01

S011-00025

Key No.

Part No.

I.C.

1 S012-00329 1 01 NPS2-10109 2 S012-00277 2 01 S013-00665 2 02 S013-00666 2 03 S013-00667 2 04 S013-00668 2 05 S013-00669 2 06 S013-00761 3 S012-00278 4 0540-02000-F 5 HBA2-00100 6 0104-12030-a 7 0389-12000-a 8 NPS3-60600 9 0545-02000-h 10 MBC3-00001-1 11 0103-12025-a 12 0389-12000-a 13 0942-00003-0 14 0102-08016-a 15 0389-08000-a 16 0942-00003-0 17 0102-06016-a 18 0389-06000-a 19 8822-010012 20 0816-13850-0 21 0816-13540-0 22 0816-13180-0 23 0816-13240-0 24 0827-60700-a 25 0805-48300-B 26 S012-00501 A 26 01 S012-00502 A 26 02 S012-00503 A 26 03 S012-00504 A 26 04 S012-00505 A 26 05 S012-00506 A 26 06 S012-00507 A

PAGE 6

Please DO NOT Make Copies Of This Manual

Part Name

FRAME BUSH URETHAN FOAM As URETHAN URETHAN URETHAN URETHAN URETHAN URETHAN CUSHION NIPPLE, GREASE PLATE BOLT WASHER, H PIN PLUG, SUNK COLLAR BOLT WASHER, H DEPPING PLATE BOLT WASHER, H DEPPING PLATE BOLT WASHER, H PIN, KNOCK TRIM TRIM TRIM TRIM GUARD HOSE BAND, NYLON URETHAN As URETHAN URETHAN URETHAN URETHAN URETHAN URETHAN

SER No, NS3530003~ H36300051~

1-01

Q.ty Applicable Ser. No. Remarks

1 2 1 1 1 1 1 1 1 1 1 1 2 2 1 1 1 1 1 4 4 4 2 2 2 2 1 1 1 1 1 3 1 1 1 1 1 1 1

~NS3530020 ~H3630139 ~NS3530020 ~H3630139 ~NS3530020 ~H3630139 ~NS3530020 ~H3630139 ~NS3530020 ~H3630139 ~NS3530020 ~H3630139 ~NS3530020 ~H3630139

NS3530021~ H3630140~ NS3530021~ H3630140~ NS3530021~ H3630140~ NS3530021~ H3630140~ NS3530021~ H3630140~ NS3530021~ H3630140~ NS3530021~ H3630140~

PAGE 7

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

TANK Gp-FUEL S011-00019

TANK Gp-FUEL

1-02

S011-00019

Key No.

Part No.

I.C.

1 S012-00259 2 0103-10025-a 3 0389-10000-a 4 NK27-80007 5 NAS8-00011 6 0102-05010-a 7 0380-05000-a 8 562-00900 9 NAS8-00010 10 41301-01430 11 0757-10017-0 12 0760-11500-0 13 S042-00080 14 0103-10020-a 15 0389-10000-a 16 S042-00016 16 01 S042-00176 17 0102-08065-a 18 0389-08000-a 19 S042-00015 19 01 S042-00100 20 0102-08020-a 21 0389-08000-a 22 S042-00017 22 01 S042-00101 23 0102-06020-a 24 0389-06000-a 25 0388-06000-c 26 * 27 * 28 * 29 0753-08060-0 30 0753-08045-0 31 0753-08050-0 32 0760-12500-0 33 0750-13020-0 34 0942-00003-0 35 0102-06012-a 36 0389-06000-a 37 0102-08012-a

PAGE 8

Please DO NOT Make Copies Of This Manual

Part Name

SER No, NS3530003~ H36300051~

1-02

Q.ty Applicable Ser. No. Remarks

TANK FUEL BOLT WASHER, H SENDER UNIT PACKING BOLT WASHER, SPRING STRAINER TANK CAP VALVE, NEEDLE HOSE, VINYL CLIP BRACKET BOLT WASHER, H WATER SEDIMENTER ELEMENT BOLT WASHER, H FILTER, FUEL ELEMENT BOLT WASHER, H PUMP, FUEL FILTER KIT BOLT WASHER, H WASHER, TOOTHED

1 4 4 1 1 5 5 1 1 1 1 1 1 2 2 1 1 1 1 1 1 2 2 1 1 2 2 1

HOSE, FUEL HOSE, FUEL HOSE, FUEL CLIP BAND DEPPING PLATE BOLT WASHER, H BOLT

1 1 1 5 1 3 2 1 1

PAGE 9

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

TANK Gp-FUEL S011-00019

TANK Gp-FUEL

1-02

S011-00019

Key No.

Part No.

I.C.

PAGE 10

Please DO NOT Make Copies Of This Manual

Part Name

SER No, NS3530003~ H36300051~

1-02

Q.ty Applicable Ser. No. Remarks

1 4 4 1 1 5 5 1 1 1 1 1 1 2 2 1 1 1 1 1 1 2 2 1 1 2 2 1

HOSE, FUEL HOSE, FUEL HOSE, FUEL CLIP BAND DEPPING PLATE BOLT WASHER, H BOLT

1 1 1 5 1 3 2 1 1

PAGE 11

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

TANK Gp-FUEL S011-00019

Key No.

Part No.

I.C.

38 0389-08000-a 39 0805-35150-B

PAGE 12

Part Name

WASHER, H BAND, NYLON

SER No, NS3530003~ H36300051~

1-02

Q.ty Applicable Ser. No. Remarks

1 3

Please DO NOT Make Copies Of This Manual

PAGE 13

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

TANK Gp-HYD S011-00020

1-03

Key No.

Part No.

I.C.

1 S012-00257 2 0103-10025-a 3 0389-10000-a 4 NAS2-20100 5 S012-00338 6 0491-00125-a 7 0102-08016-a 8 0389-08000-a 9 30554-61024 10 41301-01240 11 40701-00360 12 MBU5-71000 12 01 PA-2520 12 02 PA-2521 12 03 PA-2522 13 NFS7-01100 13 01 NFS7-01110 14 0582-16012-X 15 0567-16012-L 16 0568-12012-H 17 0563-12008-H 18 0620-08014-F 19 0601-04006-X 20 0601-06006-X 21 0547-12000-0 22 0942-00003-0 23 0102-08012-a 24 0389-08000-a 25 0560-12012H 26 0580-12008-X 27 0490-00029-a 28 S012-00536 D

PAGE 14

Please DO NOT Make Copies Of This Manual

Part Name

TANK HYD BOLT WASHER, H COVER FLANGE O-RING BOLT WASHER, H PLUG GAUGE, LEVEL FILTER, SUCTION SUCTION ELEMENT VALVE SPRING SPIN FILTER ELEMENT ELBOW, MALE 90째 ELBOW 90째, FEMALE TEE BUSHING HOSE NIPPLE ELBOW, MALE45째 O-RING BOSS ELBOW, MALE45째 O-RING BOSS PLUG,O-RING BOSS DEPPING PLATE BOLT WASHER, H NIPPLE CONNECTOR, MALE O-RING URETHANE

SER No, NS3530003~ H36300051~

1-03

Q.ty Applicable Ser. No. Remarks

1 4 4 1 1 1 12 12 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

NS3530021~ H3630142~

PAGE 15

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

HOOD & COVER Gp S011-00021

1-04

Key No.

PAGE 16

Part No.

I.C.

Part Name

SER No, NS3530003~ H36300051~

Q.ty Applicable Ser. No. Remarks

1 S012-00321 2 0102-08020-a 3 0389-08000-a 4 0909-00000 5 41301-01720 6 SP62-00001 7 SP62-00002 8 NPS2-00009 9 0102-08020-a 10 0389-08000-a 11 S012-00260 12 HCA2-70100 13 0102-08016-a 14 0389-08000-a 15 S012-00122 16 0102-06016-a 17 0389-06000-a 18 S013-00131 19 0102-06016-a 20 0389-06000-a 21 S012-00116 22 0102-08025-a 23 0389-08000-a 24 NPS2-50200 25 0103-10025-a 26 0387-10000-a 27 NOS2-50005

BATTERY COVER BOLT WASHER, H PLUG, RUBBER CUSHION HANDLE KEY Ass’y KEY LOCK PLATE PLATE BOLT WASHER, H HOOD HINGE Ass’y BOLT WASHER, H LOCK ASSY BOLT WASHER, H BRACKET BOLT WASHER, H STRIKER BOLT WASHER, H BRACKET BOLT WASHER SHIM

1 4 4 2 1 2 1 1 6 6 1 2 4 4 1 4 4 1 2 2 1 2 2 1 2 2 AR

28 NOS2-50006 29 S013-00065 30 S012-00322 31 NPS2-50008 32 S012-00219 33 0102-06016-a 34 0389-06000-a 35 NPS2-50002 36 0102-06016-a 37 0389-06000-a 38 0816-19140-0 39 0813-03200-0

SHIM PLATE URETAN FOAM URETHAN FOAM(B) COVER BOLT WASHER, H COVER (R) BOLT WASHER, H TRIM WEATHER STRIP

AR ~NS3530021 1 ~H3630139 ~NS3530021 1 ~H3630139 1 1 4 4 1 4 4 1 1

Please DO NOT Make Copies Of This Manual

1-04

t=2.3 t=1.2

PAGE 17

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

HOOD & COVER Gp S011-00021 Key No.

Part No.

I.C.

40 NK27-80005 41 0102-08010-a 42 0389-08000-a 43 NPS2-00604 44 S012-00508 A 44 01 S012-00509 A 44 02 S012-00510 A

PAGE 18

Part Name

WIRE ROPE BOLT WASHER, H URETHAN FOAM URETHAN FOAM URETHAN URETHAN

SER No, NS3530003~ H36300051~

1-04

Q.ty Applicable Ser. No. Remarks

1 2 2 1 1 1 1

~NS3530020 ~H3630139 NS3530021~ H3630140~ NS3530021~ H3630140~ NS3530021~ H3630140~ NS3530021~ H3630140~

Please DO NOT Make Copies Of This Manual

PAGE 19

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

WIRING Gp

S011-00023

WIRING Gp

1-05

S011-00023 Key No.

Part No.

I.C.

44 03 S012-00511 A 1 904-00002-3 2 HCA2-00001-1 3 HCA2-00002-1 4 0103-10025-a 5 0387-10000-a 6 S012-00204 7 0103-10020-a 8 0389-10000-a 9 DRS7-20400 10 0257-08000-a 11 0389-08000-a 12 S012-00290 13 S012-00289 13 01 0852-00060-0 13 02 0851-01010-0 14 S083-00078 15 S013-00136 16 40901-04010 16 01 0851-01003-0 16 02 0851-01005-0 16 03 0851-01010-0 16 04 0851-01015-0 16 05 0851-01020-0 17 40901-04160 18 0101-06016-a 19 0389-06000-a 20 * 21 * 22 * 23 * 24 SP49-00036 25 0942-00003-0 26 0102-08016-a 27 0389-08000-a 28 466-02002 29 0102-08016-a 30 0389-08000-a 31 0805-50250-B 32 S043-00030

PAGE 20

Please DO NOT Make Copies Of This Manual

Part Name

SER No, NS3530003~ H36300051~

1-05

Q.ty Applicable Ser. No. Remarks

URETHAN BATTERY PLATE RUBBER BOLT WASHER BATTERY CORD(-) BOLT WASHER, H BATTERY CODE(+) NUT WASHER, H HARNESS, ENGINE MAIN HARNESS LINK, FUSIBLE FUSE HARNESS LIGHT BRACKET FUSE BOX FUSE FUSE FUSE FUSE FUSE RELAY BOLT WASHER, H

1 1 1 1 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 AR AR AR AR AR 1 12 12

HEAD LAMP DEPPING PLATE BOLT WASHER, H HORN BOLT WASHER, H BAND, NYLON UNIT, CONTROL TIMER

1 3 6 6 1 1 1 10 1

PAGE 21

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

WIRING Gp

S011-00023 Key No.

Part No.

I.C.

33 S043-00029 34 S012-00015

PAGE 22

Part Name

RELAY COVER

SER No, NS3530003~ H36300051~

1-05

Q.ty Applicable Ser. No. Remarks

2 1

Please DO NOT Make Copies Of This Manual

PAGE 23

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

LINES Gp-FUEL S011-00024

LINES Gp-FUEL

1-06

S011-00024

Key No.

Part No.

I.C.

35 0388-08000-c 1 0753-08250-0 2 0751-06310-0 3 0757-04002-0 4 0750-13020-0 5 0942-00003-0 6 0102-08016-a 7 0389-08000-a

PAGE 24

Please DO NOT Make Copies Of This Manual

Part Name

WASHER, TOOTHED HOSE, FUEL HOSE, RUBBER HOSE, VINYL BAND DEPPING PLATE BOLT WASHER, H

SER No, NS3530003~ H36300051~

1-06

Q.ty Applicable Ser. No. Remarks

1 1 1 1 4 3 3 3

PAGE 25

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

WEIGHT Gp S011-00103

WEIGHT Gp

1-07

S011-00103

Key No.

PAGE 26

Part No.

I.C.

8 0805-50250-B 1 S013-00346 2 0108-14085-a 3 NOS2-00005 4 NPS2-00006 5 NPS2-00007 6 NQS2-00200 6 01 NQS2-00201 6 02 NQS2-00202 7 0016-01012-P 8 S012-00512 A 8 01 S012-00513 A 8 02 S012-00514 A 9 S012-00518 A 9 01 S012-00519 A

Please DO NOT Make Copies Of This Manual

Part Name

BAND, NYLON COUNTERWEIGHT BOLT WASHER URETHAN FOAM(L) URETHAN FOAM (R) URETHAN FOAM As URETHAN URETHAN BOLT, HOLE COVER URETHAN FOAM URETHAN URETHAN URETHAN FOAM URETHAN

SER No, NS3530003~ H36300051~

1-07

Q.ty Applicable Ser. No. Remarks

5 1 4 4 1 1 1 1 1 2 1 1 1 1 1

~NS3530020 ~H3630139 ~NS3530020 ~H3630139 ~NS3530020 ~H3630139 ~NS3530020 ~H3630139 ~NS3530020 ~H3630139 ~NS3530020 ~H3630139 NS3530021~ H3630140~ NS3530021~ H3630140~ NS3530021~ H3630140~ NS3530021~ H3630140~ NS3530021~ H3630140~ NS3530021~ H3630140~

PAGE 27

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

LINES Gp-GREASE S011-00105

LINES Gp-GREASE

1-08

S011-00105

Key No.

PAGE 28

Part No.

I.C.

9 02 S012-00520 A 1 NOS2-00300 2 0102-08016-a 3 0389-08000-a 4 0540-02000-F 5 0731-02004-0 6 0730-02004-0 7 0754-04055-0 8 0754-04170-0 9 0754-04150-0

Please DO NOT Make Copies Of This Manual

Part Name

URETHAN MANIFOLD BOLT WASHER, H NIPPLE, GREASE CONNECTOR 90Â°, NYLON TUBE CONNECTOR, NYLON TUBE TUBE,NYLON TUBE,NYLON TUBE,NYLON

SER No, NS3530003~ H36300051~

1-08

Q.ty Applicable Ser. No. Remarks

1 1 2 2 3 4 1 1 1 1

PAGE 29

H36C PARTS CATALOGUE

Purchased From T.M. Manuals

SER No, NS3530003~ H36300051~ Key No.

PAGE 30

Please DO NOT Make Copies Of This Manual

Part No.

I.C.

Part Name

Q.ty Applicable Ser. No. Remarks

PAGE 31

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

KEY PLATE Gp S011-00101

1-09

Key No.

Part No.

I.C.

10 0805-35150-B

PAGE 32

Please DO NOT Make Copies Of This Manual

Part Name

BAND,NYLON

SER No, NS3530003~ HY3570001~

1-09

Q.ty Applicable Ser. No. Remarks

PAGE 33

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

KEY PLATE Gp S091-00084

KEY PLATE Gp S091-0084

1-09

Key No.

Part No.

I.C.

1 S012-00246

PAGE 34

Please DO NOT Make Copies Of This Manual

Part Name

KEY PLATE

SER No, H36300051~

1-09

Q.ty Applicable Ser. No. Remarks

Q.ty:2 keys

PAGE 35

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

WORK Ar.

PAGE 36

Please DO NOT Make Copies Of This Manual

PAGE 37

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

POST Gp-SWING S021-00015

POST Gp-SWING

2-01

S021-00015

Key No.

Part No.

I.C.

1 S012-00247 1 S022-00028 1 01 S022-00029 2 NQS3-60400 3 HCA3-60001 4 HCA3-60004 5 0103-16035-a 6 NQS3-60800 7 MBC3-00001-1 8 0103-12025-a 9 0389-12000-a 10 NQS3-60500 11 MBC3-00001-1 12 0103-12025-a 13 0389-12000-a 14 MBU3-00020 15 MBU3-00021 16 MBU3-00022 17 MBU3-00023 18 MBU3-00024 19 MBU3-00025 20 NQS3-60700 21 NQS3-10002 22 0103-10020-a 23 0389-10000-a

PAGE 38

Please DO NOT Make Copies Of This Manual

Part Name

KEY PLATE SWING POST As BUSH PIN COLLAR WASHER BOLT PIN COLLAR BOLT WASHER, H PIN COLLAR BOLT WASHER, H SHIM(A) SHIM(B) SHIM(C) SHIM(D) SHIM(E) SHIM(F) PIN COVER, HOSE BOLT WASHER, H

SER No, NS3530003~ H36300051~

2-01

Q.ty Applicable Ser. No. Remarks

1 1 2 1 1 1 1 1 2 2 2 1 1 1 1 AR AR AR AR AR AR 1 1 2 2

Q.ty:2 keys

t=0.5 t=1.0 t=0.5 t=1.0 t=0.5 t=1.0

PAGE 39

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

BOOM Gp

S021-00016

BOOM Gp

2-02

S021-00016 Key No.

Part No.

I.C.

24 NQS3-00002 1 NQS3-21000-1 1 01 NQS3-20001 1 02 0493-45055-h 2 0540-02000-F 3 NPS3-60900 4 NQS3-61000-1 5 0294-30000-a 6 0383-30000-a 7 NQS3-61100 8 MBC3-00001-1 9 0103-12025-a 10 0389-12000-a 11 HCA5-00200 12 NQS5-15100-1 13 NQS5-15300 14 12-032021 15 0103-10025-a 16 0389-10000-a 17 NB46-030902 18 0102-08030-a 19 0251-08000-a 20 0389-08000-a 21 MBU3-00022

PAGE 40

Please DO NOT Make Copies Of This Manual

Part Name

PLATE BOOM BUSH SEAL, DUST NIPPLE, GREASE PIN PIN U NUT WASHER PIN COLLAR BOLT WASHER,H PIPE, ARM PIPE, BUCKET(R) PIPE, BUCKET(L) CLAMP (B) BOLT WASHER, H CLAMP BOLT NUT WASHER, H SHIM(C)

SER No, NS3530003~ H36300051~

2-02

Q.ty Applicable Ser. No. Remarks

2 1 2 2 1 1 1 1 1 1 3 3 2 2 1 1 4 4 4 2 2 2 4 AR

t=0.5

PAGE 41

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

ARM Gp

S021-00017

ARM Gp

2-03

S021-00017 Key No.

Part No.

I.C.

22 MBU3-00023 1 S022-00027 1 01 8522-030021 1 02 0493-40050-h 2 0540-02000-F 3 NPS3-60900 4 MBC3-00001-1 5 0103-12025-a 6 0389-12000-a 7 MBU3-00022

PAGE 42

Please DO NOT Make Copies Of This Manual

Part Name

SHIM(D) ARM As BUSH SEAL, DUST NIPPLE, GREASE PIN COLLAR BOLT WASHER, H SHIM(C)

SER No, NS3530003~ H36300051~

2-03

Q.ty Applicable Ser. No. Remarks

AR 1 6 6 2 2 1 2 2 AR

t1.0

t=0.5

PAGE 43

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

LINKAGE Gp-BUCKET S021-00018

LINKAGE Gp-BUCKET

2-04

S021-00018

Key No.

Part No.

I.C.

8 MBU3-00023 1 NQS3-41000 2 NQS3-42000 3 NQS3-43000 3 01 8522-030021 3 02 NQS3-40001 4 0542-02000-F 5 NQS3-60001 6 SB18-060001 7 0540-02000-F 8 0103-10080-a 9 0255-10000-a 10 MBU3-00022 11 MBU3-00023

PAGE 44

Please DO NOT Make Copies Of This Manual

Part Name

SHIM(D) LINK, BUCKET(R) LINK, BUCKET(L) LINK, DUMP BUSH BUSH NIPPLE, GREASE PIN PIN NIPPLE, GREASE BOLT NUT SHIM(C) SHIM(D)

SER No, NS3530003~ H36300051~

2-04

Q.ty Applicable Ser. No. Remarks

AR 1 1 1 2 2 2 1 1 2 2 4 AR AR

t=1.0

t=0.5 t=1.0

PAGE 45

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

COVER Gp-BOOM S021-00059

COVER Gp-BOOM

2-05

S021-00059

Key No.

PAGE 46

Part No.

I.C.

1 NQS3-00001 2 0103-12020-a 3 0389-12000-a 4 NRS3-00004

Please DO NOT Make Copies Of This Manual

Part Name

COVER BOLT WASHER, H TUBE, VINYL

SER No, NS3530003~ H36300051~

2-05

Q.ty Applicable Ser. No. Remarks

1 1 1 2

PAGE 47

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

LAMP Gp-BOOM S021-00058

LAMP Gp-BOOM

2-06

S021-00058

Key No.

PAGE 48

Part No.

I.C.

1 902-00450 1 01 11-3208700-2 2 10-030010 3 0103-12020-a 4 0389-12000-a 5 933-59007 6 0102-08016-a 7 0389-08000-a

Please DO NOT Make Copies Of This Manual

Part Name

LAMP BULB BRACKET BOLT WASHER, H CLAMP BOLT WASHER, H

SER No, NS3530003~ H36300051~

2-06

Q.ty Applicable Ser. No. Remarks

1 1 1 1 1 1 1 1

PAGE 49

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

BUCKET Gp S021-00069

BUCKET Gp

2-50

S021-00069

Key No.

PAGE 50

Part No.

I.C.

1 NQS3-51000 1 01 02-000141 1 02 02-000151 1 03 0212-12030-a 1 04 0311-12000-a 1 05 0381-12000-a 1 06 952-66001 1 07 04-103761 1 08 04-103771 2 8835-030041 3 8822-030042 4 8822-030043 5 0103-10030-a 6 0389-10000-a

Please DO NOT Make Copies Of This Manual

Part Name

BUCKET CUTTER, SIDE(R) CUTTER, SIDE(L) BOLT NUT WASHER, SPRING TOOTH BOLT NUT BUSH(A) COVER WASHER BOLT WASHER, H

SER No, NS3530003~ H36300051~

2-50

Q.ty Applicable Ser. No. Remarks

1 1 1 6 6 6 4 8 8 1 1 AR 4 4

t1.0

PAGE 51

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

PIN Gp-BUCKET S021-00067

PIN Gp-BUCKET

2-51

S021-00067

Key No.

PAGE 52

Part No.

I.C.

1 8835-060001 2 0540-02000-F 3 0103-10110-a 4 0103-10080-a 5 0255-10000-a 6 30809-00438 1 S022-00085

Please DO NOT Make Copies Of This Manual

Part Name

PIN NIPPLE, GREASE BOLT BOLT NUT O-RING LONG ARM As

SER No, NS3530003~ H36300051~

2-51

Q.ty Applicable Ser. No. Remarks

2 2 1 1 4 4 1

PAGE 53

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

ARM Gp-LONG S021-00072

ARM Gp-LONG

2-52

S021-00072

Key No.

PAGE 54

Part No.

I.C.

1 01 8522-030021 1 02 PA-2442 2 0540-02000-F 3 NPS3-60900 4 MBC3-00001-1 5 0103-12025-a 6 0389-12000-a 7 MBU3-00022 8 MBU3-00023 1 S032-00036

Please DO NOT Make Copies Of This Manual

Part Name

BUSH SEAL, DUST NIPPLE, GREASE PIN COLLAR BOLT WASHER, H SHIM(C) SHIM(D) CHASSIS

SER No, NS3530003~ H36300051~

2-52

Q.ty Applicable Ser. No. Remarks

6 6 2 2 1 2 2 AR AR 1

PAGE 55

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

CHASSIS Ar.

PAGE 56

Please DO NOT Make Copies Of This Manual

PAGE 57

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

FRAME Gp-UNDCRG S031-00024

FRAME Gp-UNDCRG

3-01

S031-00024

Key No.

Part No.

I.C.

2 NOS1-00002-1 3 0103-10016-a 4 0389-10000-a 5 8822-010002 6 0103-10020-a 7 0389-10000-a 8 MBC1-70001 9 0103-08020-a 10 0389-08000-a 1 NK30-80002

PAGE 58

Please DO NOT Make Copies Of This Manual

Part Name

COVER BOLT WASHER, H COVER BOLT WASHER, H COVER BOLT WASHER, H BEARING

SER No, NS3530003~ H36300051~

3-01

Q.ty Applicable Ser. No. Remarks

2 4 4 1 4 4 2 6 6 1

PAGE 59

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

BEARING Gp-SWING S031-00025

BEARING Gp-SWING

3-02

S031-00025

Key No.

PAGE 60

Part No.

I.C.

2 SB15-010001 3 0103-12075-a 4 * 5 S032-00110 6 0103-12075-a 7 0389-12000-a 1 HCA1-42000

Please DO NOT Make Copies Of This Manual

Part Name

SER No, NS3530003~ H36300051~

3-02

Q.ty Applicable Ser. No. Remarks

BATH, GREASE BOLT

1 24

PLATE BOLT WASHER, H IDLER As

1 16 16 1

PAGE 61

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

IDLER Gp

S031-00020

IDLER Gp

3-03

S031-00020 Key No.

PAGE 62

Part No.

I.C.

1 01 HCA1-42001 1 02 8522-012002 1 03 8522-012010 1 04 0460-62035-0 1 05 0495-35072-a 1 06 0446-07200-0 1 07 0425-10060-0 2 8822-013100-1 1 NK27-80100

Please DO NOT Make Copies Of This Manual

Part Name

IDLER SHAFT GUIDE, FORK BEARING, BALL SEAL, OIL RING, SNAP PIN, SPRING IDLER YORK As ADJUST CYL As

SER No, NS3530003~ H36300051~

3-03

Q.ty Applicable Ser. No. Remarks

1 1 2 2 2 2 2 1 1

PAGE 63

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

ADJUSTER Gp S031-00021

ADJUSTER Gp

3-04

S031-00021

Key No.

PAGE 64

Part No.

I.C.

1 01 0420-05045-0 1 02 0238-24000-a 1 03 17P-B-22510 1 04 17P-B-68290 1 10 NK27-80110 1 11 17P-B-22520 1 12 0491-00040-b 1 13 0494-07040-b 1 14 17P-B-68300 1 15 17P-B-22500 1 16 0446-05200-0 1 17 17P-B-22530 1 18 17P-B-68310 1 19 0540-02000-F 1 8522-015000-3

Please DO NOT Make Copies Of This Manual

Part Name

PIN, SPLIT NUT, CASTLE PLATE SPRING GREASE CYL As TUBE O-RING RING, BACK UP SEAL, DUST SPACER RING, SNAP ROD VALVE, CARTRIDGE NIPPLE, GREASE TRACK ROLLER As

SER No, NS3530003~ H36300051~

3-04

Q.ty Applicable Ser. No. Remarks

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

PAGE 65

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

TRACK Gp

S031-00022

TRACK Gp

3-05

S031-00022

Key No.

PAGE 66

Part No.

I.C.

1 01 8522-015001 1 02 8522-015002-3 1 03 8522-015003-2 1 04 0460-62035-0 1 05 0495-35072-a 1 06 0446-07000-o 1 07 0445-03500-o 1 08 0275-20000-a 1 09 0383-20000-a 1 10 0381-20000-a 1 MBU1-46000 1 01 PA-2031

Please DO NOT Make Copies Of This Manual

Part Name

ROLLER SHAFT SPACER BEARING, BALL SEAL, OIL RING, SNAP RING, SNAP NUT WASHER WASHER, SPRING ROLLER AS.-CARRIER SEAL, CAP

SER No, NS3530003~ H36300051~

3-05

Q.ty Applicable Ser. No. Remarks

1 1 2 2 2 2 2 2 2 2 1 1

PAGE 67

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

CARRIER Gp S031-00034

CARRIER Gp

3-06

S031-00034

Key No.

PAGE 68

Part No.

I.C.

1 02 PA-2036 1 03 PA-2029 1 04 PA-2030 1 05 PA-2033 1 06 PA-2024 1 07 0445-03000-0 1 08 0446-06200-0 2 0103-10065-a 3 0255-10000-a 4 0389-10000-a 1 9NU1-10001 2 0103-12035-a 3 0389-12000-a

Please DO NOT Make Copies Of This Manual

Part Name

LINER ROLLER SHAFT BEARING, BALL SEAL, OIL RING, SNAP RING, SNAP BOLT NUT WASHER, H SPROCKET BOLT WASHER, H

SER No, NS3530003~ H36300051~

3-06

Q.ty Applicable Ser. No. Remarks

2 1 1 2 1 2 1 1 1 2 1 9 9

PAGE 69

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

SPROCKET Gp S031-00071

SPROCKET Gp

3-07

S031-00071

Key No.

PAGE 70

Part No.

I.C.

1 S032-00045 2 MBC3-60100 3 MBC3-60200 4 MBC3-00001-1

Please DO NOT Make Copies Of This Manual

Part Name

DOZER As PIN PIN COLLAR

SER No, NS3530003~ H36300051~

3-07

Q.ty Applicable Ser. No. Remarks

1 1 1 2

PAGE 71

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

DOZER Gp

S031-00026

DOZER Gp

3-08

S031-00026 Key No.

Part No.

I.C.

5 0103-12025-a 6 0389-12000-a 7 0542-02000-F 8 MBC3-60400 9 MBC3-00001-1 10 0103-12025-a 11 0389-12000-a 1 NCU1-00001 2 0103-10020-a 3 0389-10000-a 1 NQS1-41000-2 1 SP71-00015

PAGE 72

Please DO NOT Make Copies Of This Manual

Part Name

BOLT WASHER, H NIPPLE, GREASE PIN COLLAR BOLT WASHER, H PLATE BOLT WASHER, H CRAWLER, RUBBER CRAWLER, STEEL

SER No, NS3530003~ H36300051~

3-08

Q.ty Applicable Ser. No. Remarks

2 2 3 2 2 2 2 1 2 2 1 2

PAGE 73

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

COVER Gp-DOZER S031-00068

COVER Gp-DOZER

3-09

S031-00068

Key No.

Part No.

I.C.

1 01 S10035 1 02 S10028 1 03 B10234-No. 3

PAGE 74

Please DO NOT Make Copies Of This Manual

Part Name

PIN, MASTER PIN, JOINT PLATE, SHOE

SER No, NS3530003~ H36300051~

3-09

Q.ty Applicable Ser. No. Remarks

1 42 43

PAGE 75

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

CRAWLER Gp-RUBBER S031-00075

CRAWLER Gp-RUBBER

3-50

S031-00075

Key No.

Part No.

I.C.

2 8522-010011

PAGE 76

Please DO NOT Make Copies Of This Manual

Part Name

PLATE, GUIDE

SER No, NS3530003~ H36300051~

3-50

Q.ty Applicable Ser. No. Remarks

PAGE 77

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

CRAWLER Gp-STEEL S031-00077

CRAWLER Gp-STEEL

3-51

S031-00077

Key No.

PAGE 78

Part No.

I.C.

3 0103-10025-a 4 0389-10000-a 1 S042-00192 1 01 S042-00097 1 02 S042-00122 1 03 S042-00134 1 04 S042-00177

Please DO NOT Make Copies Of This Manual

Part Name

BOLT WASHER, H ENGINE As FILTER, OIL SOLENOID As V-BELT ALTERNATOR As

SER No, NS3530003~ H36300051~

3-51

Q.ty Applicable Ser. No. Remarks

12 12 1 1 1 1 1

PAGE 79

H36C PARTS CATALOGUE

Purchased From T.M. Manuals

ENGINE & RADIATOR Ar.

To order spare parts for your engine please contact Hanix direct PAGE 80

Please DO NOT Make Copies Of This Manual

PAGE 81

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

ENGINE Gp

S041-00015

ENGINE Gp

4-01

S041-00015 Key No.

Part No.

I.C.

1 05 S042-00178 2 SP17-00005 2 01 S044-00001 2 02 S044-00002 2 03 S044-00003 3 0160-10030-e 4 S042-00184 5 0942-00004-0 6 0108-10025-a 7 0389-10000-a 8 S012-00205 9 0103-10016-a 10 0389-10000-a 11 MBU4-10004 12 0108-12030-a 13 0389-12000-a 14 MBU4-10005 15 0108-12030-a 16 0389-12000-a 17 NK27-81100 18 NPS2-30011 19 0102-08020-a 20 0389-08000-a 21 S042-00190 22 0108-10020-a 23 0389-10000-a 24 S042-00126 25 0103-10020-a 26 0389-10000-a 27 S042-00181 28 S042-00127 29 0108-12020-a 30 0389-12000-a 31 S042-00185 31 01 S042-00186 31 02 S042-00187 31 03 S042-00188 32 S042-00112 33 S042-00189 34 S042-00125

PAGE 82

Please DO NOT Make Copies Of This Manual

Part Name

STARTER As COUPLING RUBBER BODY HUB BOLT, SOCKET HEAD BOLT, SOCKET HEAD PUMP FLANGE DEPPING PLATE BOLT WASHER, H EARTH CORD BOLT WASHER, H ENGINE BKT(C) BOLT WASHER, H ENGINE BKT(D) BOLT WASHER, H PUSH-PULL WIRE BRACKET BOLT WASHER, H BRACKET BOLT WASHER, H MUFFLER ASSY BOLT WASHER, H PIPE, TAIL CLAMP, MUFFLER BOLT WASHER, H INSULATION INSULATION INSULATION INSULATION WIRE WIRE GASKET, EXHAUST

SER No, NS3530003~ H36300051~

4-01

Q.ty Applicable Ser. No. Remarks

1 1 1 1 3 3 1 2 8 8 1 1 1 1 4 4 1 4 4 1 1 2 2 1 2 2 1 2 2 1 1 1 1 1 1 1 1 1 1 1

PAGE 83

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

ENGINE Gp

S041-00015

Key No.

Part No.

I.C.

1 SP19-00011 2 MBC4-12101 3 MBU4-12102 4 0255-12000-a 1 S042-00179 1 01 S042-00102

PAGE 84

Part Name

RUBBER ABSORBER BOLT, STUD WASHER NUT AIR CLEANER As ELEMENT

SER No, NS3530003~ H36300051~

4-01

Q.ty Applicable Ser. No. Remarks

2 1 1 2 1 1

Please DO NOT Make Copies Of This Manual

PAGE 85

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

MOUNTING Gp-ENGINE S041-00012

MOUNTING Gp-ENGINE

4-02

S041-00012

Key No.

PAGE 86

Part No.

I.C.

2 0102-08020-a 3 0389-08000-a 4 S042-00145 5 0102-08020-a

Please DO NOT Make Copies Of This Manual

Part Name

BOLT WASHER, H PLATE BOLT

SER No, NS3530003~ H36300051~

4-02

Q.ty Applicable Ser. No. Remarks

2 2 1 2

PAGE 87

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

CLEANER Gp-AIR S041-00013

CLEANER Gp-AIR

4-03

S041-00013

Key No.

Part No.

I.C.

6 0389-08000-a 7 0759-05800-b 8 0759-05200-b 9 S042-00193 10 S043-00025 1 S042-00156 2 0103-12035-a 3 0389-12000-a 4 S043-00027 5 S042-00128 6 S042-00110

PAGE 88

Please DO NOT Make Copies Of This Manual

Part Name

WASHER, H CLAMP, HOSE CLAMP, HOSE HOSE INDICATOR, AIR CLEANER RADIATOR BKT As BOLT WASHER, H CUSHION,RADIATOR RADIATOR As PIPE

SER No, NS3530003~ H36300051~

4-03

Q.ty Applicable Ser. No. Remarks

2 2 2 2 1 1 4 4 2 1 2

PAGE 89

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

RADIATOR Gp S041-00031

RADIATOR Gp

4-04

S041-00031

Key No.

Part No.

I.C.

7 0103-10090-a 8 0389-10000-a 9 0251-10000-a 10 S042-00088 11 0102-08016-a 12 0389-08000-a 13 S042-00087 14 S042-00174 15 S042-00154 16 S042-00155 17 S042-00153 18 0102-08020-a 19 0251-08000-a 20 S042-00175 21 S042-00014 22 0102-06016-a 23 0389-06000-a 24 MBC4-26007 25 0759-04000-b 26 0759-03800-b 27 MBC4-26008 28 11430-01620 29 0759-06300-b 30 S042-00057 31 0620-04000-F 32 0760-11500-0 33 0815-30058-0 34 0815-30052-0 35 0815-30063-0 36 0815-30024-0 37 0815-30042-0 38 0759-04600-b 39 S012-00521 D 1 S042-00240 1 S052-00850 1 01 S054-00438 1 02 S054-00439 1 03 S052-00442 1 04 0491-00075-b 1 05 0490-00012-b

PAGE 90

Please DO NOT Make Copies Of This Manual

Part Name

BOLT WASHER, H NUT BRACKET BOLT WASHER, H BRACKET OIL COOLER As SHROUD FAN GUARD BAFFLE BOLT NUT BRACKET RESERVE TANK BOLT WASHER, H UPPER HOSE CLAMP, HOSE CLAMP, HOSE LOWER HOSE HOSE CLAMP, HOSE VALVE, BALL HOSE NIPPLE CLIP SPONGE SPONGE SPONGE SPONGE SPONGE CLAMP, HOSE URETHAN FOAM ELEMENT PUMP PACKING ASSY PACKING SEAL , OIL O-RING O-RING

SER No, NS3530003~ H36300051~

4-04

Q.ty Applicable Ser. No. Remarks

2 2 4 1 17 19 1 1 1 1 1 1 1 1 1 2 2 1 1 2 1 1 1 1 1 1 1 2 2 1 1 1 2 1 1 1 1 1 NS3530021~ 1 H3630140~ 3

OPTION INC.102-111

PAGE 91

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

INNER ELEMENT Gp-AIR CLEANER S091-00033(OPTION)

INNER ELEMENT Gp-AIR CLEANER

4-50

S091-00033(OPTION)

Key No.

Part No.

I.C.

1 06 0490-00011-b 1 07 0490-00011-b

PAGE 92

Please DO NOT Make Copies Of This Manual

Part Name

O-RING O-RING

SER No, NS3530003~ H36300051~

4-50

Q.ty Applicable Ser. No. Remarks

1 1

PAGE 93

H36C PARTS CATALOGUE

Purchased From T.M. Manuals

HYDRAULIC Ar.

PAGE 94

Please DO NOT Make Copies Of This Manual

PAGE 95

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

PUMP Gp

S051-00071

PUMP Gp

5-01

S051-00071 Key No.

Part No.

I.C.

1 08 S054-00440 1 09 0490-00007-b 1 10 0491-00055-b 1 11 0490-00008-b 1 12 S054-00441 2 0103-12030-a 3 0389-12000-a 4 S052-00412 5 0490-00038-a 6 0647-20000-H 7 0160-10030-a 8 0389-10000-a 9 30554-62020 10 0547-04000-0 11 0601-04004-X 1 S052-00410 1 01 S054-00683 1 02 S054-00684 1 03 S054-00685 1 04 S054-00688 1 05 S054-00689 1 06 S054-00690 1 07 S054-00693 1 08 S054-00694

PAGE 96

Please DO NOT Make Copies Of This Manual

Part Name

WASHER, SEAL O-RING O-RING O-RING VALVE ASSY BOLT WASHER, H PIPE ASSY O-RING FLANGE, HALF BOLT, SOCKET HEAD WASHER, H TEE PLUG, O-RING BOSS ELBOW, MALE45Â° O-RING BOSS SLEW MOTOR REDUCTION GEAR PISTON KIT RING O-RING RING, SNAP BOLT, SOCKET HEAD HYDRAULIC MOTOR BODY H KIT

SER No, NS3530003~ H36300051~

5-01

Q.ty Applicable Ser. No. Remarks

1 1 1 2 1 2 2 1 1 2 4 4 2 3 3 1 1 1 1 1 4 6 1 1

PAGE 97

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

MOTOR Gp-SLEW S051-00072

MOTOR Gp-SLEW

5-02

S051-00072

Key No.

PAGE 98

Part No.

I.C.

1 09 S054-00695 1 10 S054-00696 1 11 S054-00697 1 12 S054-00698 1 13 S054-00699 1 14 S054-00700 1 15 S054-00703 1 16 S054-00701 1 17 S054-00704 1 18 S054-00705 1 19 S054-00706 1 20 S054-00702 1 21 S054-00707 1 22 S054-00708 1 23 S054-00709 1 24 S054-00710 1 25 S054-00711 1 26 S054-00712 1 27 S054-00713 1 28 S054-00714 2 8822-010012 3 0103-16045-a 4 0389-16000-a 5 0601-06006-X 6 0601-04004-X 7 0576-06006-X 1 HCA1-30000-2 1 01 HCA1-30001-1 1 02 HCA1-30002-2 1 03 8822-017003 1 04 8822-017004 1 05 HCA1-30100-2 1 06 0491-00100-a 1 07 NK27-89001 1 08 0490-00070-b

Please DO NOT Make Copies Of This Manual

Part Name

CYLINDER BARREL KIT SWASH PLATE KIT SEAL KIT FILTER BEARING BEARING RING, SNAP PIN, SPRING PIN O-RING O-RING O-RING PIN RELIEF VALVE O-RING O-RING O-RING O-RING BACK UP RING SEAL KIT PIN, KNOCK BOLT WASHER, H ELBOW, MALE45° O-RING BOSS ELBOW, MALE45° O-RING BOSS TEE, MALE RUN O-RING BOSS SWIVEL JOINT CYLINDER ROTOR LOWER CAP WASHER, THRUST PACKING ASSY O-RING SLIPPER SEAL O-RING

SER No, NS3530003~ H36300051~

5-02

Q.ty Applicable Ser. No. Remarks

1 1 1 1 1 1 1 1 1 1 1 2 3 2 1 1 1 1 2 1 1 6 6 3 1 1 1 1 1 1 1 1 1 1 1

PAGE 99

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

SWIVEL Gp

S051-00073

SWIVEL Gp

5-03

S051-00073 Key No.

Part No.

I.C.

1 09 0493-80094-d 1 10 0545-04000-h 1 11 0160-10020-c 1 12 0102-08025-a 1 13 0380-08000-a 1 14 HBA1-30003-1 2 0103-12030-a 3 0389-12000-a 4 0602-08008-X 5 0603-04004-X 6 0695-44074-X 7 0600-08008-X 8 0602-04006-X 9 0601-08008-X 10 0602-04004-X 11 0607-04004-X 12 0602-04004-X 1 S052-00794 1 01 S054-00442 1 02 S052-00447 1 03 0490-00008-a 1 04 0491-00170-a 1 05 S052-00448 1 06 0490-00014-b 1 07 S052-00449 1 08 0490-00022-b

PAGE 100

Please DO NOT Make Copies Of This Manual

Part Name

SEAL, DUST PLUG BOLT, SOCKET HEAD BOLT WASHER, SPRING PIN, KNOCK BOLT WASHER, H ELBOW, MALE90° O-RING BOSS 90°LONG O-RING ADAPTER CONNECTOR, MALE LONG CONNECTOR, MALE ELBOW, MALE90° O-RING BOSS ELBOW, MALE45° O-RING BOSS ELBOW, MALE90° O-RING BOSS TEE, MALE BRANCH O-RING BOSS ELBOW, MALE90° O-RING BOSS MOTOR, TRAVEL SEAL KIT O-RING O-RING O-RING SEAL, FLOATING O-RING SEAL, OIL O-RING

SER No, NS3530003~ H36300051~

5-03

Q.ty Applicable Ser. No. Remarks

1 1 4 6 6 1 4 4 3 2 1 1 1 4 2 1 2 1 1 1 2 1 2 3 1 2

INC.102-110

PAGE 101

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

MOTOR Gp-TRAVEL S051-00074

MOTOR Gp-TRAVEL

5-04

S051-00074

Key No.

PAGE 102

Part No.

I.C.

1 09 0490-00012-b 1 10 0490-00011-b 2 0103-12030-a 3 0389-12000-a 4 0600-08008-x 5 0600-04004-x 1 S062-00042 2 0103-10016-a 3 0389-10000-a 4 S052-00383 5 S053-00010 6 0103-10080-a 7 0600-06006-X 8 0602-06008-X 9 0602-06008-X

Please DO NOT Make Copies Of This Manual

Part Name

O-RING O-RING BOLT WASHER, H CONNECTOR CONNECTOR VALVE MOUNT As BOLT WASHER, H CONTROL VALVE MANIFOLD BOLT CONNECTOR, MALE ELBOW, MALE90° O-RING BOSS ELBOW, MALE90° O-RING BOSS

SER No, NS3530003~ H36300051~

5-04

Q.ty Applicable Ser. No. Remarks

2 1 9 9 2 2 1 7 11 1 2 4 2 2 1

PAGE 103

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

VALVE Gp-CONTROL(1) S051-00080

VALVE Gp-CONTROL(1)

5-05-1

S051-00080

Key No.

PAGE 104

Part No.

I.C.

1 S052-00383 1 01 S054-00453 1 02 S054-00454 1 03 S054-00455 1 04 S054-00456 1 05 S054-00457 1 06 S054-00458 1 07 S054-00459 1 08 S054-00460 1 09 S054-00461 1 10 S054-00462 1 11 S054-00463 1 12 S054-00464 1 13 S054-00465 1 14 SP22-00037 1 15 SP22-00038 1 16 SP22-00039 1 17 SP22-00040 1 18 S052-00472 1 19 S052-00473 1 20 S054-00466 1 21 S054-00467 1 22 0490-00018-b 1 23 S054-00468 1 24 0263-08000-a 2 SP22-00041 2 01 S054-00466

Please DO NOT Make Copies Of This Manual

Part Name

CONTROL VALVE ASSY INLET SECTION ASSY SPOOL SECTION ASSY SPOOL SECTION ASSY SPOOL SECTION ASSY SPOOL SECTION ASSY SPOOL SECTION ASSY SPOOL SECTION ASSY INLET SECTION ASSY SPOOL SECTION ASSY SPOOL SECTION ASSY SPOOL SECTION ASSY OUTLET SECTION ASSY O-RING RELIEF VALVE ASSY RELIEF VALVE ASSY RELIEF VALVE ASSY RELIEF VALVE ASSY ANTI-BOID VALVE ASSY PLUG O-RING PLUG O-RING ROD, TIE NUT RELIEF VALVE ASSY O-RING

SER No, NS3530003~ H36300051~

5-05-1

Q.ty Applicable Ser. No. Remarks

1 1 1 1 1 1 1 1 1 1 1 1 1 11 2 1 4 1 3 2 13 1 1 4 8 2 2

DOZER SLEW PTO SWING ARM DRIVE(R) DRIVE(L) BOOM BUCKET 20.6Mpa 17.2Mpa 23.5Mpa 27.5Mpa

OPTION 17.2Mpa

PAGE 105

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

VALVE Gp-CONTROL(2) S051-00080

VALVE Gp-CONTROL(2)

5-05-2

S051-00080

Key No.

PAGE 106

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Part No.

I.C.

30 S054-00469 31 0160-05018-a 32 S054-00470 33 S054-00471 34 S052-00146 35 S052-00156 36 * 37 * 38 * 39 * 40 * 41 * 42 * 43 * 44 S054-00472 45 S054-00473 46 S054-00474 47 S054-00475 48 S054-00476 49 S054-00477 50 S054-00473 51 S052-00150 52 S054-00478 53 S054-00489 54 S052-00148 55 S054-00487 56 S054-00488

Please DO NOT Make Copies Of This Manual

Part Name

CAP BOLT,SOCKET HEAD SEAT,SPRING SPRING SEAT,SPRING O-RING SPOOL SPOOL SPOOL SPOOL SPOOL SPOOL SPOOL SPOOL PLUG O-RING SPRING POPPET POPPET PLUG O-RING SPRING POPPET POPPET SPRING O-RING O-RING

SER No, NS3530003~ H36300051~

5-05-2

Q.ty Applicable Ser. No. Remarks

2 4 2 2 2 2 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1

BOOM ARM BUCKET SLEW PTO SWING DRIVE DOZER

PAGE 107

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

VALVE Gp-CONTROL(3) S051-00080

VALVE Gp-CONTROL(3)

5-05-3

S051-00080

Key No.

Part No.

I.C.

10 0603-06004-X 11 0600-06004-X 12 0603-06008-X 13 0695-66061-X 14 0604-06006-0 15 0575-06006-0 16 0560-04006-H 17 0580-06006-X 18 0600-06008-X 19 0695-68060-X 20 0602-06004-X 21 0695-64053-X 22 NPS5-00010 23 0604-16012-0 24 0563-12008-L 25 0603-06006-X 26 0602-04004-X 27 0603-04004-X 28 0576-04004-X 29 0601-04004-X 30 0602-04004-X 31 0604-06004-0 32 0562-04004-H 33 NK27-71600 34 0580-04004-X 35 0601-06006-X 36 0620-08014-F 37 S052-00248 38 SP22-00049 39 0600-04004-X 40 0602-04004-X 41 SP31-00015 1 SP22-00036 1 01 S052-00498 1 02 S052-00499 1 03 S052-00500 1 04 S052-00501 1 05 S052-00502 1 06 S052-00503 1 07 S052-00504

PAGE 108

Please DO NOT Make Copies Of This Manual

Part Name

90°LONG O-RING ADAPTER CONNECTOR, MALE 90°LONG O-RING ADAPTER CONNECTOR, MALE LONG CONNECTOR, O-RING BOSS FEMALE TEE NIPPLE CONNECTOR, MALE CONNECTOR, MALE CONNECTOR, MALE LONG ELBOW, MALE90° O-RING BOSS CONNECTOR, MALE LONG TEE CONNECTOR, O-RING BOSS FEMALE BUSHING 90°LONG O-RING ADAPTER ELBOW, MALE90° O-RING BOSS 90°LONG O-RING ADAPTER TEE, MALE RUN O-RING BOSS ELBOW, MALE45° O-RING BOSS ELBOW, MALE90° O-RING BOSS CONNECTOR, O-RING BOSS FEMALE ELBOW 90°, MALE J/S FILTER CONNECTOR, MALE ELBOW, MALE45° O-RING BOSS HOSE NIPPLE ELBOW HOSE 45° BALL VALVE CONNECTOR,MALE ELBOW, MALE90° O-RING BOSS ELBOW VALVE, JOYSTICK(RH) NUT, LOCK LEVER KNOB PIN, SPRING BUSH CONNECTOR HOUSING

SER No, NS3530003~ H36300051~

5-05-3

Q.ty Applicable Ser. No. Remarks

1 1 1 5 1 1 1 1 2 2 1 1 1 1 1 1 15 4 2 4 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1

PAGE 109

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

VALVE Gp-CONTROL S051-00080

Key No.

Part No.

I.C.

1 08 S052-00505

PAGE 110

Part Name

BELLOWS

SER No, NS3530003~ H36300051~

5-05-3

Q.ty Applicable Ser. No. Remarks

Please DO NOT Make Copies Of This Manual

PAGE 111

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

VALVE Gp-JOYSTICK S051-00052

VALVE Gp-JOYSTICK

5-06

S051-00052

Key No.

PAGE 112

Part No.

I.C.

2 SP22-00035 2 01 S052-00498 2 02 S052-00499 2 03 S052-00500 2 04 S052-00501 2 05 S052-00502 2 06 S052-00503 2 07 S052-00504 2 08 S052-00505 3 0103-06025-a 4 0389-06000-a 5 0627-04004-X 1 S062-00024 2 0102-08020-a 3 0389-08000-a 4 S052-00017 4 01 S052-00633 4 02 S052-00634 4 03 S052-00635 4 04 0490-00008-b 4 05 S052-00636 4 06 S052-00637

Please DO NOT Make Copies Of This Manual

Part Name

VALVE, JOYSTICK(LH) NUT, LOCK LEVER KNOB PIN, SPRING BUSH CONNECTOR HOUSING BELLOWS BOLT WASHER, H NIPPLE, HOSE STAND, LEVER BOLT WASHER, H VALVE, PILOT PACKING O-RING O-RING O-RING RO-PLUG PLUG

SER No, NS3530003~ H36300051~

5-06

Q.ty Applicable Ser. No. Remarks

1 1 1 1 1 1 2 1 1 8 8 12 1 5 5 1 4 4 4 2 3 2

PAGE 113

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

VALVE Gp-PILOT S051-00053

VALVE Gp-PILOT

5-07

S051-00053

Key No.

Part No.

I.C.

4 07 0490-00011-b 4 08 0160-06050-a 4 09 S052-00638 4 10 S052-00639 4 11 S052-00640 4 12 S052-00641 4 13 S052-00642 5 0103-10025-a 6 0389-10000-a 7 0600-04004-X 8 0602-04004-X 9 0603-04004-X 10 NSS7-01400-1 10 01 * 10 02 * 10 03 * 10 04 S052-00509 10 05 * 10 06 S052-00512 10 07 S052-00511 10 08 S052-00513 10 09 S052-00514 10 10 S054-00420 10 11 S052-00516 10 12 * 10 13 S052-00518 10 14 S052-00519 10 15 * 10 16 0160-08016-a 10 17 0340-04008-a 10 18 0382-04000-a 10 19 0382-08000-a 10 20 0426-25064 10 21 0425-03006-0 10 22 * 10 23 0490-00010-a 10 24 0490-00016-b 10 25 S052-00523 11 0103-10030-a 12 0389-10000-a

PAGE 114

Please DO NOT Make Copies Of This Manual

Part Name

O-RING BOLT, SOCKET HEAD SPRING SPRING SPRING SET SCREW BELLOWS BOLT WASHER, H CONNECTOR, MALE ELBOW, MALE90° O-RING BOSS 90° LONG O-RING ADAPTER VALVE, PILOT BODY COVER PUSHER SHIM CAM PIN SPRING COMP BOOT SHIM SHIM SHIM SPOOL HOLDER, SPRING SPRING COMP PLATE, NAME BOLT, SOCKET HEAD SCREW WASHER WASHER RIVET PIN, SPRING STEEL BALL O-RING O-RING PUSHER ASSY BOLT WASHER, H

SER No, NS3530003~ H36300051~

5-07

Q.ty Applicable Ser. No. Remarks

3 4 4 4 4 2 2 4 4 1 3 2 2 1 1 2 2 1 2 1 1 2 2 2 2 2 2 1 2 1 2 2 2 2 2 2 2 2 4 4

PAGE 115

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

VALVE Gp-PILOT S051-00053

Key No.

Part No.

I.C.

13 0601-04004-X 14 0600-04004-X 1 NSS7-01500-1 1 01 S052-00524 1 02 S052-00525 1 03 * 1 04 * 1 05 S052-00528 1 06 S052-00529 1 07 * 1 08 * 1 09 S052-00532 1 10 S052-00533

PAGE 116

Part Name

ELBOW, MALE45Â° O-RING BOSS CONNECTOR, MALE VALVE, PILOT SHIM SHIM BODY SPOOL SPRING COMP SLEEVE COVER PUSHER PIN BOOT

SER No, NS3530003~ H36300051~

5-07

Q.ty Applicable Ser. No. Remarks

4 4 1 2 2 1 2 2 2 1 2 1 1

DOZER

Please DO NOT Make Copies Of This Manual

PAGE 117

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

VALVE Gp-DOZER S051-00257

VALVE Gp-DOZER

5-08

S051-00257

Key No.

PAGE 118

Part No.

I.C.

1 11 * 1 12 S052-00535 1 13 * 1 14 S052-00537 1 15 0160-12020-a 1 16 0160-04008-a 1 17 0382-06000-a 1 18 0382-10000-a 1 19 * 1 20 0425-03006-0 1 21 0420-25016-0 1 22 * 1 23 0490-00010-a 1 24 0490-00024-b 1 25 S052-00539 1 26 * 2 0103-10030-a 3 0389-10000-a 4 0601-04004-X 5 0602-04004-X 6 0603-04004-X 1 NPS9-51300 2 0102-08020-a 3 0389-08000-a 4 NPS9-51400 5 0580-08008-X 6 0546-08000-H 1 S052-00429 1 01 S054-00228 1 02 S054-00229 1 03 S054-00230 1 04 S054-00231

Please DO NOT Make Copies Of This Manual

Part Name

PLATE, NAME SPRING COMP CAM SHIM BOLT BOLT WASHER WASHER SCREW SPRING PIN PIN STEEL BALL O-RING O-RING PUSHER ASSY BODY ASSY BOLT WASHER, H ELBOW, MALE 45° ELBOW, MALE 90° ELBOW, MALE 90° LONG MANIFOLD(A) BOLT WASHER MANIFOLD(B) O-CONNECTOR PLUG BOOM CYL CYL TUBE As PISTON ROD As HEAD, CYL As HEAD, CYL

SER No, NS3530003~ H36300051~

5-08

Q.ty Applicable Ser. No. Remarks

1 2 1 2 1 2 2 4 2 2 2 2 2 2 2 1 2 2 2 1 1 1 4 4 1 3 3 1 1 1 1 1

PAGE 119

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

MANIFOLD Gp-PTO S051-00258

MANIFOLD Gp-PTO

5-09

S051-00258

Key No.

PAGE 120

1 1 1 1 1 1 1

Part No.

I.C.

05 S054-00189 06 S054-00232 07 S054-00191 08 0491-00075-b 09 S054-00233 10 0491-00080-b 11 S054-00234

Please DO NOT Make Copies Of This Manual

Part Name

BUSH U-RING RING, WIPER O-RING RING, BACKUP O-RING HOLDER As

SER No, NS3530003~ H36300051~

5-09

Q.ty Applicable Ser. No. Remarks

1 1 1 1 1 1 1

PAGE 121

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

CYLINDER Gp-BOOM S051-00075

CYLINDER Gp-BOOM

5-10

S051-00075

Key No.

PAGE 122

Part No.

I.C.

1 12 S054-00235 1 13 S054-00236 1 14 S054-00237 1 15 S054-00238 1 16 0491-00075-b 1 17 S054-00239 1 18 S054-00240 1 19 S054-00241 1 20 S054-00242 1 21 S054-00243 1 22 S054-00170 1 23 S054-00171 1 24 S054-00244 1 25 S054-00245 1 26 S054-00174 1 27 S054-00175 1 28 0490-00022-b 1 29 S054-00176 1 30 S054-00177 1 31 S054-00178 1 32 0540-02000-F 1 33 S054-00224 1 34 S054-00214 1 35 S054-00215 2 0600-06006-X 1 S052-00430 1 01 S054-00246 1 02 S054-00247 1 03 S054-00230 1 04 S054-00231 1 05 S054-00189 1 06 S054-00232 1 07 S054-00191 1 08 0491-00075-b 1 09 S054-00233 1 10 0491-00080-b 1 11 S054-00234

Please DO NOT Make Copies Of This Manual

Part Name

HOLDER SPACER SEAL, CUSHION COLLAR O-RING RING, BACKUP PISTON As PISTON SEAL RING As RING, SLIDE SET SCREW BALL, STEEL BEARING, CUSHION PIPE As PLUG As PLUG O-RING BOLT, UPSET HOLDER, PIPE SEAL, DUST NIPPLE, GREASE PACKING As BUSH BUSH CONNECTOR, MALE ARM CYL CYL TUBE As PISTON ROD As HEAD, CYL As HEAD, CYL BUSH U-RING RING, WIPER O-RING RING, BACKUP O-RING HOLDER As

SER No, NS3530003~ H36300051~

5-10

Q.ty Applicable Ser. No. Remarks

1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 2 1 1 4 2 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1

PAGE 123

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

CYLINDER Gp-ARM S051-00076

CYLINDER Gp-ARM

5-11

S051-00076

Key No.

PAGE 124

Part No.

I.C.

1 12 S054-00235 1 13 S054-00236 1 14 S054-00237 1 15 S054-00238 1 16 0491-00075-b 1 17 S054-00239 1 18 S054-00240 1 19 S054-00241 1 20 S054-00242 1 21 S054-00243 1 22 S054-00170 1 23 S054-00171 1 24 S054-00248 1 25 S054-00249 1 26 S054-00174 1 27 S054-00175 1 28 0490-00022-b 1 29 S054-00176 1 30 S054-00177 1 31 S054-00178 1 32 0540-02000-F 1 33 S054-00224 1 34 S054-00214 1 35 S054-00215 1 S052-00431 1 01 S054-00250 1 02 S054-00251 1 03 S054-00252 1 04 S054-00253 1 05 S054-00189 1 06 S054-00232 1 07 S054-00191 1 08 0491-00070-b 1 09 S054-00159 1 10 0491-00075-b 1 11 S054-00254 1 12 S054-00255

Please DO NOT Make Copies Of This Manual

Part Name

HOLDER SPACER SEAL, CUSHION COLLAR O-RING RING, BACKUP PISTON As PISTON SEAL RING As RING, SLIDE SET SCREW BALL, STEEL BEARING, CUSHION PIPE As PLUG As PLUG O-RING BOLT, UPSET HOLDER, PIPE SEAL, DUST NIPPLE, GREASE PACKING As BUSH BUSH BUCKET CYL CYL TUBE As PISTON ROD As HEAD, CYL As HEAD, CYL BUSH U-RING RING, WIPER O-RING RING, BACKUP O-RING PISTON As PISTON

SER No, NS3530003~ H36300051~

5-11

Q.ty Applicable Ser. No. Remarks

1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 2 1 1 4 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

PAGE 125

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

CYLINDER Gp-BUCKET S051-00431

CYLINDER Gp-BUCKET

5-12

S051-00431

Key No.

PAGE 126

Part No.

I.C.

1 13 S054-00168 1 14 S054-00169 1 15 S054-00170 1 16 S054-00171 1 17 S054-00256 1 18 S054-00257 1 19 S054-00174 1 20 S054-00175 1 21 0490-00022-b 1 22 S054-00176 1 23 S054-00177 1 24 S054-00184 1 25 0540-02000-F 1 26 0542-02000-F 1 27 S054-00226 1 28 S054-00214 1 29 S054-00215 2 0600-06006-X 1 S052-00432 1 01 S054-00258 1 02 S054-00259 1 03 S054-00230 1 04 S054-00231 1 05 S054-00189 1 06 S054-00232 1 07 S054-00191 1 08 0491-00075-b 1 09 S054-00233 1 10 0491-00080-b 1 11 S054-00240 1 12 S054-00241 1 13 S054-00242

Please DO NOT Make Copies Of This Manual

Part Name

SEAL RING As RING,SLIDE SET SCREW BALL, STEEL PIPE As PIPE As PLUG As PLUG O-RING BOLT, UPSET HOLDER, PIPE SEAL, DUST NIPPLE, GREASE NIPPLE, GREASE PACKING As BUSH BUSH CONNECTOR, MALE SWING CYL CYL TUBE As PISTON ROD As HEAD, CYL As HEAD, CYL BUSH U-RING RING, WIPER O-RING RING, BACKUP O-RING PISTON As PISTON SEAL RING As

SER No, NS3530003~ H36300051~

5-12

Q.ty Applicable Ser. No. Remarks

1 2 1 1 1 1 2 2 4 2 2 4 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1

PAGE 127

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

CYLINDER Gp-SWING S051-00078

CYLINDER Gp-SWING

5-13

S051-00078

Key No.

PAGE 128

Part No.

I.C.

1 14 S054-00243 1 15 S054-00170 1 16 S054-00171 1 17 S054-00184 1 18 0540-02000-F 1 19 S054-00225 1 20 S054-00214 1 21 S054-00215 2 0602-04004-X 3 0600-04004-X 1 S052-00433 1 01 S054-00260 1 02 S054-00261 1 03 S054-00262 1 04 S054-00263 1 05 S054-00264 1 06 S054-00265 1 07 S054-00266 1 08 0491-00085-b 1 09 S054-00267 1 10 0491-00090-b 1 11 S054-00268 1 12 S054-00269 1 13 S054-00270

Please DO NOT Make Copies Of This Manual

Part Name

RING, SLIDE SET SCREW BALL, STEEL SEAL, DUST NIPPLE, GREASE PACKING As BUSH BUSH ELBOW, MALE90Â° O-RING BOSS CONNECTOR, MALE DOZER CYL CYL TUBE As PISTON ROD As HEAD, CYL As HEAD, CYL BUSH U-RING RING, WIPER O-RING RING, BACKUP O-RING PISTON As PISTON SEAL RING As

SER No, NS3530003~ H36300051~

5-13

Q.ty Applicable Ser. No. Remarks

2 1 1 4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

PAGE 129

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

CYLINDER Gp-DOZER S051-00079

CYLINDER Gp-DOZER

5-14

S051-00079

Key No.

Part No.

I.C.

1 14 S054-00271 1 15 S054-00170 1 16 S054-00171 1 17 S054-00178 1 18 0540-02000-F 1 19 0541-02000-F 1 20 S054-00227 1 21 S054-00272 1 22 S054-00273 2 0602-04004-X 1 S052-50000 2 S052-50001 3 S052-50002 4 S052-50003 5 S052-50004 6 S052-50005 7 S052-50006 8 HCA5-00008 9 0750-35050-0 10 0805-78365-B 1 S052-50007 2 S052-50008 3 S052-50009 4 S052-50010

PAGE 130

Please DO NOT Make Copies Of This Manual

Part Name

RING, SLIDE SET SCREW BALL, STEEL SEAL, DUST NIPPLE, GREASE NIPPLE, GREASE PACKING As BUSH BUSH ELBOW, MALE90Â° O-RING BOSS HOSE (P1) HOSE (P2) HOSE (P3) HOSE (R3) HOSE (R5) HOSE (Z) HOSE SUCTION SPRING BAND BAND, NYLON HOSE (T1) HOSE (T2) HOSE (T3) HOSE (3)

SER No, NS3530003~ H36300051~

5-14

Q.ty Applicable Ser. No. Remarks

2 1 1 4 1 1 1 1 1 2 1 1 1 1 1 1 1 2 2 5 1 1 1 1

PAGE 131

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

LINES Gp-PUMP S051-00059

LINES Gp-PUMP

5-15

S051-00059

Key No.

PAGE 132

Part No.

I.C.

5 S052-50011 6 S052-50020 7 0750-22030-0 8 0805-78365-B 1 S052-50014 2 S052-50015 3 S052-50016 4 S052-50017 5 S052-50022 6 S052-50023

Please DO NOT Make Copies Of This Manual

Part Name

HOSE (6) HOSE (V) BAND BAND, NYLON HOSE (7) HOSE (8) HOSE (9) HOSE (10) HOSE (FF) HOSE (EE)

SER No, NS3530003~ H36300051~

5-15

Q.ty Applicable Ser. No. Remarks

1 1 4 5 1 1 1 1 1 1

PAGE 133

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

LINES Gp-COOLER & RETURN S051-00259

LINES Gp-COOLER & RETURN

5-16

S051-00259

Key No.

Part No.

I.C.

7 S052-50024 8 S052-50025 9 S052-50026 10 S052-50027 11 S052-50028 12 S052-50029 13 S052-50030 14 S052-50031 15 S052-50032

PAGE 134

Please DO NOT Make Copies Of This Manual

Part Name

HOSE (PB) HOSE (HH) HOSE (AA) HOSE (CC) HOSE (GG) HOSE (PA) HOSE (PC) HOSE (PD) HOSE (JJ)

SER No, NS3530003~ H36300051~

5-16

Q.ty Applicable Ser. No. Remarks

1 1 1 1 1 1 1 1 1

PAGE 135

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

LINES Gp-PILOT S051-00061

LINES Gp-PILOT

5-17

S051-00061

Key No.

Part No.

I.C.

16 S052-50033 17 S052-50034 18 S052-50035 19 0827-35015-a 20 0805-78365-B 1 S052-50086 2 S052-50087 3 S052-50088 4 S052-50089 5 0805-78365-B 1 S052-50055 2 S052-50056 3 0827-35015-a 4 0805-78365-B 1 S052-50084 2 S052-50085 3 0827-35015-a 4 0805-78365-B 1 S052-50090 2 S052-50091

PAGE 136

Please DO NOT Make Copies Of This Manual

Part Name

HOSE (KK) HOSE (BB) HOSE (DD) GUARD HOSE BAND, NYLON HOSE (O) HOSE (P) HOSE (J) HOSE (I) BAND, NYLON HOSE (M) HOSE (N) GUARD HOSE BAND, NYLON HOSE (G) HOSE (H) GUARD HOSE BAND, NYLON HOSE (PP) HOSE (OO)

SER No, NS3530003~ H36300051~

5-17

Q.ty Applicable Ser. No. Remarks

1 1 1 2 6 1 1 1 1 5 1 1 2 5 1 1 1 5 1 1

PAGE 137

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

LINES Gp-FRONT S051-00081

LINES Gp-FRONT

5-18

S051-00081

Key No.

PAGE 138

Part No.

I.C.

1 S052-50092 2 S052-50093 1 S052-50094 2 S052-50095 3 S052-50096

Please DO NOT Make Copies Of This Manual

Part Name

HOSE (JJ) HOSE (II) HOSE (RR) HOSE (QQ) HOSE (Q)

SER No, NS3530003~ H36300051~

5-18

Q.ty Applicable Ser. No. Remarks

1 1 1 1 1

PAGE 139

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

LINES Gp-BOOM SWING S051-00063

LINES Gp-BOOM SWING

5-19

S051-00063

Key No.

PAGE 140

Part No.

I.C.

4 S052-50097 5 S052-50099 6 S052-50117 7 NQS9-51200 8 NQS9-51300

Please DO NOT Make Copies Of This Manual

Part Name

HOSE (R) HOSE (UU) HOSE (U) PIPE PIPE

SER No, NS3530003~ H36300051~

5-19

Q.ty Applicable Ser. No. Remarks

1 1 1 1 1

PAGE 141

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

LINES Gp-BOOM S051-00082

LINES Gp-BOOM

5-20

S051-00082

Key No.

Part No.

I.C.

9 NQS9-51400 10 0102-08020-a 11 0389-08000-a 1 S052-50100

PAGE 142

Please DO NOT Make Copies Of This Manual

Part Name

PIPE BOLT WASHER, W HOSE (K)

SER No, NS3530003~ H36300051~

5-20

Q.ty Applicable Ser. No. Remarks

1 4 4 1

PAGE 143

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

LINES Gp-ARM S051-00083

LINES Gp-ARM

5-21

S051-00083

Key No.

Part No.

I.C.

2 S052-50101 3 S052-50102

PAGE 144

Please DO NOT Make Copies Of This Manual

Part Name

HOSE (L) HOSE (2)

SER No, NS3530003~ H36300051~

5-21

Q.ty Applicable Ser. No. Remarks

1 1

PAGE 145

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

LINES Gp-BUCKET S051-00084

LINES Gp-BUCKET

5-22

S051-00084

Key No.

Part No.

I.C.

4 S052-50103 5 S052-50104 6 0805-78365-B

PAGE 146

Please DO NOT Make Copies Of This Manual

Part Name

HOSE (5) HOSE (PE) BAND, NYLON

SER No, NS3530003~ H36300051~

5-22

Q.ty Applicable Ser. No. Remarks

1 1 5

PAGE 147

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

LINES Gp-PTO S051-00085

LINES Gp-PTO

5-23

S051-00085

Key No.

Part No.

I.C.

1 S052-50105 2 S052-50106 3 S052-50107 4 S052-50108 5 S052-50109 6 S052-50110 7 S052-50111 8 S052-50112 9 S052-50113 10 S052-50114 11 S052-50115

PAGE 148

Please DO NOT Make Copies Of This Manual

Part Name

HOSE (SA) HOSE (SB) HOSE (SC) HOSE (SD) HOSE (S1) HOSE (S2) HOSE (S3) HOSE (S4) HOSE (A) HOSE (C) HOSE (D)

SER No, NS3530003~ H36300051~

5-23

Q.ty Applicable Ser. No. Remarks

1 1 1 1 1 1 1 1 1 1 1

PAGE 149

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

LINES Gp-SLEW S051-00086

LINES Gp-SLEW

5-24

S051-00086

Key No.

Part No.

I.C.

12 S052-50116 13 0805-78365-B 1 S052-00080 2 S052-00081 3 S052-00082 4 S052-00083

PAGE 150

Please DO NOT Make Copies Of This Manual

Part Name

HOSE (B) BAND, NYLON HOSE (D1) HOSE (D2) HOSE (D3) HOSE (D4)

SER No, NS3530003~ H36300051~

5-24

Q.ty Applicable Ser. No. Remarks

1 5 1 1 1 1

PAGE 151

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

LINES Gp-TRAVEL S051-00087

LINES Gp-TRAVEL

5-25

S051-00087

Key No.

Part No.

I.C.

5 S052-50070 6 S052-50071 7 0805-78365-B 1 S052-50037 2 S052-50038 3 S052-50039 4 S052-50040 5 S052-50041 6 S052-50042 7 S052-50043 8 S052-50044 9 S052-50045 10 S052-50046

PAGE 152

Please DO NOT Make Copies Of This Manual

Part Name

HOSE (E) HOSE (F) BAND, NYLON HOSE (PL) HOSE (PR) HOSE (4L) HOSE (2L) HOSE (3L) HOSE (1L) HOSE (1R) HOSE (4R) HOSE (2R) HOSE (3R)

SER No, NS3530003~ H36300051~

5-25

Q.ty Applicable Ser. No. Remarks

1 1 5 1 1 1 1 1 1 1 1 1 1

PAGE 153

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

LINES Gp-DOZER S051-00088

LINES Gp-DOZER

5-26

S051-00088

Key No.

Part No.

I.C.

11 S052-50018 12 S052-50019 13 0827-35015-a 14 0805-78365-B 1 NPS9-53001 2 0102-08020-a 3 0389-08000-a

PAGE 154

Please DO NOT Make Copies Of This Manual

Part Name

HOSE (TL) HOSE (TR) GUARD HOSE BAND, NYLON PLATE (A) BOLT WASHER

SER No, NS3530003~ H36300051~

5-26

Q.ty Applicable Ser. No. Remarks

1 1 2 6 1 2 2

PAGE 155

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

LINES Gp-PILOT J/S S051-00260

LINES Gp-PILOT J/S

5-27

S051-00260

Key No.

Part No.

I.C.

4 NPS9-53002 5 0102-08020-a 6 0389-08000-a 7 NPS7-01100-1 8 0101-06015-a 9 0389-06000-a 10 0600-08008-X 11 0600-08012-X 12 0549-08000-Y 1 NK27-72000 2 S092-00155 3 0102-06055-a 4 0389-06000-a 5 0602-04004-X

PAGE 156

Please DO NOT Make Copies Of This Manual

Part Name

PLATE (B) BOLT WASHER, H BALL VALVE BOLT WASHER H CONNECTOR, MALE CONNECTOR, MALE PLUG SELECTOR VALVE BRACKET BOLT WASHER, H ELBOW, MALE90Â° O-RING BOSS

SER No, NS3530003~ H36300051~

5-27

Q.ty Applicable Ser. No. Remarks

1 2 2 3 12 12 5 1 3 1 1 2 2 3

PAGE 157

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

SHUTOFF Gp-PTO S051-00161

SHUTOFF Gp-PTO

5-50

S051-00161

Key No.

Part No.

I.C.

6 0601-04004-X 7 0600-04004-X 8 NAS9-50003 9 NAS9-50004 10 0102-10025-a 11 0389-10000-a 1 S052-50037 2 S052-50038 3 S052-50133 4 S052-50134 5 S052-50041 6 S052-50042

PAGE 158

Please DO NOT Make Copies Of This Manual

Part Name

ELBOW, MALE45Â° O-RING BOSS CONECTOR, MALE LABEL LABEL BOLT WASHER, H HOSE (PL) HOSE (PR) HOSE (4L) HOSE (2L) HOSE (3L) HOSE (1L)

SER No, NS3530003~ H36300051~

5-50

Q.ty Applicable Ser. No. Remarks

3 2 1 1 2 2 1 1 1 1 1 1

PAGE 159

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

VALVE Gp-J/D S051-00328

VALVE Gp-J/D

5-51

S051-00328

Key No.

Part No.

I.C.

7 S052-50043 8 S052-50136 9 S052-50135 10 S052-50046 11 S052-50018 12 S052-50019 13 0827-35015-a 14 0805-78365-B 15 S052-50130 16 S052-50129 17 S052-50131

PAGE 160

Please DO NOT Make Copies Of This Manual

Part Name

HOSE (1R) HOSE (4R) HOSE (2R) HOSE (3R) HOSE (TL) HOSE (TR) GUARD, HOSE BAND, NYLON HOSE (c) HOSE (a) HOSE (e)

SER No, NS3530003~ H36300051~

5-51

Q.ty Applicable Ser. No. Remarks

1 1 1 1 1 1 2 6 1 1 1

PAGE 161

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

LINES Gp-J/D S051-00329

LINES Gp-J/D

5-52

S051-000329

Key No.

Part No.

I.C.

18 S052-50132 1 S052-50126 2 S052-50127 3 S052-50096 4 S052-50097 5 S052-50128 6 S052-50117 7 NQS9-51200 8 NQS9-51300 9 NQS9-51400 10 0102-08020-a 11 0389-08000-a 1 S052-50121 2 S052-50122 1 S062-00119 2 S062-00033 3 S062-00031 4 S062-00035

PAGE 162

Please DO NOT Make Copies Of This Manual

Part Name

HOSE (f) HOSE (RR) HOSE (QQ) HOSE (Q) HOSE (R) HOSE (UU) HOSE (U) PIPE PIPE PIPE BOLT WASHER, W HOSE (JJ) HOSE (II) FLOOR MAT FLOOR MAT FLOOR PLATE URETHAN FOAM

SER No, NS3530003~ H36300051~

5-52

Q.ty Applicable Ser. No. Remarks

1 1 1 1 1 1 1 1 1 1 4 4 1 1 1 1 1 1

PAGE 163

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

LINES Gp-PTO, LONG S051-00285

LINES Gp-PTO, LONG

5-53

S051-00285

Key No.

Part No.

I.C.

5 0102-08020-a 6 0389-08000-a 7 S062-00034 8 0102-08016-a 9 0389-08000-a 10 S063-00009 11 0102-08016-a 12 0389-08000-a 13 S062-00274 1 S062-00135 2 0103-12025-a

PAGE 164

Please DO NOT Make Copies Of This Manual

Part Name

BOLT WASHER, H PLATE BOLT WASHER, H COVER BOLT WASHER, H COVER COVER, E/G BOLT

SER No, NS3530003~ H36300051~

5-53

Q.ty Applicable Ser. No. Remarks

4 4 1 4 4 1 3 3 1 1 4

For CABIN For CANOPY

PAGE 165

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

LINES Gp-BUCKET, LONG S051-000283

LINES Gp-BUCKET, LONG

5-54

S051-000283

Key No.

Part No.

I.C.

3 0389-12000-a 4 S063-00075 5 0102-08016-a

PAGE 166

Please DO NOT Make Copies Of This Manual

Part Name

WASHER, H PLATE BOLT

SER No, NS3530003~ H36300051~

5-54

Q.ty Applicable Ser. No. Remarks

4 1 4

PAGE 167

H36C PARTS CATALOGUE

Purchased From T.M. Manuals

OPERATOR Ar.

PAGE 168

Please DO NOT Make Copies Of This Manual

PAGE 169

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

PLATFORM Gp S061-00029

PLATFORM Gp

6-01

S061-00029

Key No.

PAGE 170

Part No.

I.C.

6 0389-08000-a 7 S062-00138 7 01 S062-00139 7 02 S062-00140 7 03 S062-00141 7 04 S062-00142 7 05 S062-00143 7 06 S062-00144 7 07 S062-00145 7 08 S062-00146 7 09 S062-00147 7 10 S062-00148 7 11 S062-00149

Please DO NOT Make Copies Of This Manual

Part Name

WASHER, H URETHAN FOAM URETHAN FOAM URETHAN FOAM URETHAN FOAM URETHAN FOAM URETHAN FOAM URETHAN FOAM URETHAN FOAM URETHAN FOAM URETHAN FOAM URETHAN FOAM URETHAN FOAM

SER No, NS3530003~ H36300051~

6-01

Q.ty Applicable Ser. No. Remarks

4 1 1 1 1 1 1 1 1 1 1 1 1

PAGE 171

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

FIREWALL Gp S061-00023

FIREWALL Gp

6-02

S061-00023

Key No.

Part No.

I.C.

7 12 S062-00150 7 13 S062-00157 7 14 S062-00158 8 S062-00137 9 NK27-25002 10 0103-10035-a 11 0389-10000-a 12 0251-10000-a 13 S062-00153 14 0003-00000-s 15 0330-05008-a 16 0383-05000-a 17 0380-05000-a 18 S062-00430 A 18 01 S062-00431 A 18 02 S062-00432 A 18 03 S062-00433 A 18 04 S062-00434 A 18 05 S062-00435 A 18 06 S062-00436 A 18 07 S062-00437 A 18 08 S062-00438 A 18 09 S062-00439 A 18 10 S062-00440 A 18 11 S062-00441 A 18 12 S062-00442 A 18 13 S062-00443 A 18 14 S062-00444 A 1 S062-00060 1 01 * 2 0251-08000-a 3 0389-08000-a 4 S062-00057 5 0103-10020-a 6 0389-10000-a 1 NHS6-40028 2 0103-10020-a 3 0389-10000-a 4 0480-20015-0 5 NSS2-45880

PAGE 172

Please DO NOT Make Copies Of This Manual

Part Name

URETHAN FOAM URETHAN FOAM URETHAN FOAM STAY RUBBER CUSHION BOLT WASHER, H NUT WEATHER STRIP LATCH SCREW, PANHEAD WASHER WASHER, SPRING URETHAN FOAM URETHAN URETHAN URETHAN URETHAN URETHAN URETHAN URETHAN URETHAN URETHAN URETHAN URETHAN URETHAN URETHAN URETHAN SEAT As SEAT BELT NUT WASHER, H SEAT PLATE BOLT WASHER, H STAND, BRACKET BOLT WASHER, H DRY BEARING BAR

SER No, NS3530003~ H36300051~

6-02

Q.ty Applicable Ser. No. Remarks

1 1 1 1 1 1 ~NS3530020 1 ~H3630139 ~NS3530020 1 ~H3630139 ~NS3530020 1 ~H3630139 ~NS3530020 1 ~H3630139 ~NS3530020 2 ~H3630139 ~NS3530020 2 ~H3630139 ~NS3530020 2 ~H3630139 ~NS3530020 1 ~H3630139 ~NS3530020 1 ~H3630139 ~NS3530020 1 ~H3630139 ~NS3530020 1 ~H3630139 ~NS3530020 1 ~H3630139 ~NS3530020 1 ~H3630139 ~NS3530020 1 ~H3630139 ~NS3530020 1 ~H3630139 1 1 1 1 1 1 1 1 1 4 NS3530021~ 4 H3630140~ NS3530021~ 1 H3630140~ NS3530021~ 4 H3630140~ NS3530021~ 4 H3630140~ NS3530021~ 1 H3630140~ NS3530021~ 2 H3630140~ NS3530021~ 2 H3630140~ NS3530021~ 2 H3630140~ NS3530021~ 1 H3630140~

Include Seat belt

PAGE 173

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

FIREWALL Gp S061-00023 Key No.

Part No.

I.C.

6 0102-06045-a 7 0251-06000-a 8 NSS2-45860 9 NFSH-42900 10 NFSH-42003 11 0102-08020-a 12 0389-08000-a

PAGE 174

Part Name

BOLT NUT STAND, LEVER(LH) LEVER LOCK PLATE BOLT WASHER, H

SER No, NS3530003~ H36300051~

6-02

Q.ty Applicable Ser. No. Remarks

1 2 1 1 1 3 2

NS3530021~ H3630140~ NS3530021~ H3630140~ NS3530021~ H3630140~ NS3530021~ H3630140~ NS3530021~ H3630140~ NS3530021~ H3630140~

Please DO NOT Make Copies Of This Manual

PAGE 175

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

SEAT Gp

S061-00058

SEAT Gp

6-03

S061-00058

Key No.

Part No.

I.C.

13 870-00008 14 NOS2-42003 15 NFSH-80001 16 0389-10000-a 17 0420-02020-0 18 ME30-028401-1 19 0251-10000-f

PAGE 176

Please DO NOT Make Copies Of This Manual

Part Name

GRIP RETURN SPRING DAMPER WASHER,H PIN, SPLIT PUSH BOLT NUT

SER No, NS3530003~ H36300051~

6-03

Q.ty Applicable Ser. No. Remarks

1 1 1 2 2 1 1

PAGE 177

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

CONSOLE Gp-LH S061-00031

CONSOLE Gp-LH

6-04

S061-00031

Key No.

Part No.

I.C.

20 NOS2-42002 21 S062-00041 22 NSS2-45950 23 NSS2-45960 24 0333-04016-e 25 0387-08000-a 26 S083-00095 27 NPS4-10001 28 0102-08020-a 29 0389-08000-a 30 S083-00080 31 0330-04025-a 32 0380-04000-a 33 0383-04000-a 34 S062-00021 35 0102-08015-a 36 0389-08000-a 1 NSS2-45870 2 0102-08020-a 3 0389-08000-a 4 S062-00040 5 NSS2-45920 6 NSS2-45930 7 0333-04016-e 8 SP45-00001 9 0345-04025-a 10 0383-04000-a 11 * 12 * 13 * 14 * 15 SP49-00024 16 S083-00095 17 S012-00405 17 01 S083-00070 17 02 12002-01570

PAGE 178

Please DO NOT Make Copies Of This Manual

Part Name

SER No, NS3530003~ H36300051~

6-04

Q.ty Applicable Ser. No. Remarks

LOCK PLATE COVER(L) COVER COVER SCREW, TRUSTHEAD WASHER SWITCH BRACKET, SWITCH BOLT WASHER, H SWITCH, SAFETY LOCK SCREW, PAN HEAD WASHER, SPRING WASHER COWL BOLT WASHER, H STAND, LEVER(RH) BOLT WASHER, H COVER(R) COVER COVER SCREW, TRUSTHEAD METER, UNIT SCREW, PANHEAD WASHER

1 1 1 1 10 1 1 1 2 2 1 2 2 2 1 3 3 1 4 4 1 1 1 10 1 4 4

CIGARETTE LIGHTERS SWITCH KEY SWITCH As STARTER SWITCH COVER

1 1 1 1 1

PAGE 179

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

CONSOLE Gp-RH S061-00032

CONSOLE Gp-RH

6-05

S061-00032

Key No.

Part No.

I.C.

17 03 S083-00074 1 41301-01610 2 0257-14000-f 3 0103-10020-a 4 0389-10000-a 5 S062-00038 6 S062-00039 7 NSS2-41004 1 0102-08020-a 2 0389-08000-a 3 NSS2-45530 4 NSS2-45540 5 MBU6-24001 6 MBU6-27001 1 0102-08020-a 2 0389-08000-a 3 NSS2-45510 4 NSS2-45520 5 NSS2-45513 6 NSS2-45525

PAGE 180

Please DO NOT Make Copies Of This Manual

Part Name

STARTER HARNESS GRIP NUT BOLT WASHER,H LEVER, DRIVE(L) LEVER, DRIVE(R) NONSLIP BOLT WASHER, H SWING PEDAL PEDAL COVER(R) NONSLIP NONSLIP BOLT WASHER,H PTO PEDAL PEDAL COVER(L) NONSLIP NONSLIP

SER No, NS3530003~ H36300051~

6-05

Q.ty Applicable Ser. No. Remarks

1 2 2 4 4 1 1 2 2 2 1 1 1 1 2 2 1 1 1 1

PAGE 181

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

CONTROL Gp-TRAVEL S061-00033

CONTROL Gp-TRAVEL

6-06

S061-00033

Key No.

Part No.

I.C.

7 0801-20017-0 8 0330-03016-a 9 0380-03000-a 10 0383-03000-a 1 NSS2-45110 2 0103-10020-a 3 0389-10000-a

PAGE 182

Please DO NOT Make Copies Of This Manual

Part Name

RUBBER FOOT SCREW, PAN HEAD WASHER, SPRING WASHER ACCEL LEVER BKT BOLT WASHER,H

SER No, NS3530003~ H36300051~

6-06

Q.ty Applicable Ser. No. Remarks

1 1 1 1 1 2 2

PAGE 183

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

CONTROL Gp-SWING S061-00034

CONTROL Gp-SWING

6-07

S061-00034

Key No.

PAGE 184

Part No.

I.C.

4 0102-06020-a 5 0251-06000-a 6 NSS2-45150 7 NSS2-45120 8 0390-16000-c 9 0387-16000-a

Please DO NOT Make Copies Of This Manual

Part Name

BOLT NUT ACCEL LEVER SHAFT WASHER, CONICAL SPRING WASHER

SER No, NS3530003~ H36300051~

6-07

Q.ty Applicable Ser. No. Remarks

2 2 1 1 4 3

PAGE 185

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

CONTROL Gp-PTO S061-00035

CONTROL Gp-PTO

6-08

S061-00035

Key No.

Part No.

I.C.

10 0257-16000-a 11 0102-08030-a 12 0251-08000-a 13 870-00007 1 NSS2-45010 2 0103-10020-a 3 0389-10000-a 4 0102-08020-a 5 0389-08000-a 6 NSS2-45200

PAGE 186

Please DO NOT Make Copies Of This Manual

Part Name

NUT BOLT NUT GRIP PLATE BOLT WASHER, H BOLT WASHER, H LEVER DOZER

SER No, NS3530003~ H36300051~

6-08

Q.ty Applicable Ser. No. Remarks

2 1 1 1 1 4 4 2 2 1

PAGE 187

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

CONTROL Gp-GOVERNOR S061-00036

CONTROL Gp-GOVERNOR

6-09

S061-00036

Key No.

Part No.

I.C.

7 0103-10020-a 8 0389-10000-a 9 41301-01610 10 0257-14000-f 1 NSS2-45970 2 S062-00062 3 S062-00063 4 0102-05016-a 5 0383-05000-a 6 S062-00064 7 0102-08012-a 8 0389-08000-a 1 S062-00025

PAGE 188

Please DO NOT Make Copies Of This Manual

Part Name

BOLT WASHER, H GRIP NUT BRACKET BRACKET(R) BRACKET(L) BOLT WASHER HAND REST BOLT WASHER, H SEAT BOX

SER No, NS3530003~ H36300051~

6-09

Q.ty Applicable Ser. No. Remarks

2 2 1 1 2 1 1 8 8 2 4 4 1

PAGE 189

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

DOZER LEVER Gp S061-00008

DOZER LEVER Gp

6-10

S061-00008

Key No.

Part No.

I.C.

2 0102-08020-a 3 0389-08000-a 4 S062-00027 5 0103-10020-a 6 0389-10000-a 7 S063-00011 8 0102-08016-a 9 0389-08000-a 10 0813-07026-0 1 S062-00015

PAGE 190

Please DO NOT Make Copies Of This Manual

Part Name

BOLT WASHER, H BRACKET BOLT WASHER, H PLATE BOLT WASHER, H WEATHER STRIP PLATE

SER No, NS3530003~ H36300051~

6-10

Q.ty Applicable Ser. No. Remarks

5 8 1 2 2 1 3 4 1 1

PAGE 191

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

HAND REST Gp S061-00075

HAND REST Gp

6-11

S061-00075

Key No.

PAGE 192

Part No.

I.C.

2 0102-08020-a 3 0389-08000-a 4 S063-00012 5 0102-08020-a 6 0389-08000-a 7 S062-00032 1 S092-00324 1 01 S092-00173

Please DO NOT Make Copies Of This Manual

Part Name

BOLT WASHER, H PLATE BOLT WASHER, H FLOOR MAT CABIN As NOZZLE HOSE As

SER No, NS3530003~ H36300051~

6-11

Q.ty Applicable Ser. No. Remarks

4 4 1 2 2 1 1 1

PAGE 193

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

SUPPORT Gp-SEAT S061-00076

SUPPORT Gp-SEAT

6-12

S061-00076

Key No.

PAGE 194

1 1 1 1 1 1 1 1 1 1

Part No.

I.C.

02 0330-04010-a 03 S092-00174 04 0389-08000-a 05 0102-08030-a 06 S092-00175 07 0102-06016-a 08 S092-00176 09 S092-00177 10 0330-04012-a 11 S092-00178

Please DO NOT Make Copies Of This Manual

Part Name

SCREW, TAPPING MIRROR As WASHER,H BOLT TANK As BOLT CLAMP, HARNESS ASH TRAY SCREW, TAPPING HOOK, COAT

SER No, NS3530003~ H36300051~

6-12

Q.ty Applicable Ser. No. Remarks

2 1 2 1 1 8 1 1 2 1

PAGE 195

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

FLOOR PLATE Gp S061-00046

FLOOR PLATE Gp

6-13

S061-00046

Key No.

PAGE 196

1 1 1 1 1 1 1

Part No.

I.C.

12 0330-04012-a 13 S092-00179 14 0330-04012-a 15 0330-03008-a 16 S092-00180 17 S092-00181 18 S092-00182

Please DO NOT Make Copies Of This Manual

Part Name

SCREW, TAPPING EMERGENCY HAMMER SCREW, TAPPING SCREW, TAPPING GLASS RUN HOLDER, GLASS UP PLATE

SER No, NS3530003~ H36300051~

6-13

Q.ty Applicable Ser. No. Remarks

2 1 2 1 1 1 1

PAGE 197

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

CABIN Gp

S091-00088

CABIN Gp

6-50

S091-00088 Key No.

PAGE 198

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Part No.

I.C.

19 S092-00183 20 S092-00184 21 S092-00185 22 0389-08000-a 23 S092-00186 24 S092-00187 25 S092-00188 26 0102-08025-a 27 S092-00189 28 0330-05016-a 29 S092-00190 30 0389-10000-a 31 0251-10000-a 32 S092-00191 33 S092-00192 34 S092-00193 35 S092-00194 36 S092-00195 37 S092-00196 38 S092-00197 39 0251-08000-a 40 S092-00198 41 S092-00199 42 S092-00200 43 S092-00201 44 0102-08016-a 45 S092-00338 46 0389-10000-a 47 0103-10025-a 48 S092-00339 49 S092-00204 50 S092-00205 51 S092-00206 52 S092-00207 53 S092-00208 54 S092-00209 55 S092-00210 56 0102-06016-a 57 S092-00212 58 S092-00211

Please DO NOT Make Copies Of This Manual

Part Name

SCREW SCREW STRIKER, DOOR LOCK WASHER, H SCREW STOPPER, RUBBER HANDLE, ASSIST BOLT LAMP SCREW, TAPPING STOPPER, DOOR WASHER, H NUT DOOR CATCH As COVER COVER LEVER PIPE WASHER WASHER NUT WIRE As SPRING SEAL RUBBER COVER BOLT GUARD WASHER, H BOLT PAD, ROOF COVER COVER BRACKET BRACKET LOUVER CUP FASTENER BOLT SCREW DUCT-DEF

SER No, NS3530003~ H36300051~

6-50

Q.ty Applicable Ser. No. Remarks

1 2 1 2 2 2 1 6 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 6 1 8 8 1 1 1 1 1 1 1 12 3 1 1

PAGE 199

H36C PARTS CATALOGUE

Purchased From T.M. Manuals

SER No, NS3530003~ H36300051~ Key No.

PAGE 200

Please DO NOT Make Copies Of This Manual

Part No.

I.C.

Part Name

Q.ty Applicable Ser. No. Remarks

PAGE 201

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

CABIN Gp S091-00088 Key No.

Part No.

I.C.

1 59 S092-00213 1 60 S092-00214 1 61 S092-00215 1 62 0330-05010-a 1 63 S092-00216 1 64 S092-00217 1 65 S092-00218 1 66 S092-00340 1 67 S092-00220 1 68 0102-08020-a 1 69 S092-00221 1 70 S092-00341 1 71 S092-00223 1 72 S092-00224 1 73 S092-00344 1 74 S092-00342 1 75 S092-00343 2 0815-15100-1 3 SP19-00005 4 0103-12080-a 5 NRS9-20069 6 S092-00360 7 0104-16075-c 8 0389-16000-a 9 40901-03940 50 S092-00345 50 01 S092-00235 50 02 S092-00236 50 03 S092-00183 50 04 S092-00237 50 05 0251-10000-a 50 06 S092-00346 50 07 S092-00347 50 08 S092-00348 50 09 S092-00241 50 10 S092-00242 50 11 S092-00243 50 12 S092-00244 50 13 S092-00245 50 14 S092-00246

PAGE 202

Part Name

HARNESS HARNESS CLIP SCREW, TAPPING FILTER SEAL RUBBER COVER SEAL STOPPER BOLT SEAL, RUBBER GLASS SASH As GLASS GLASS COVER DUM SEAL RUBBER,ABSORBER BOLT WASHER,H SPACER BOLT WASHER,H SWITCH,WIRER GLASS As STRIKER As SHIM SCREW RUBBER NUT FRONT WINDOW As GLASS DUM STAY As STAY As ROLLER CLAMP SEAL MOTOR As

SER No, NS3530003~ H36300051~

CABIN Gp S091-00088

6-50

Q.ty Applicable Ser. No. Remarks

Key No.

1 1 2 2 1 1 1 1 2 2 2 1 1 1 1 1 1 5 8 4 4 4 4 4 1 1 2 AR 12 4 2 1 1 1 1 1 2 3 1 1

50 15 S092-00247 50 16 S092-00248 50 17 S092-00249 50 18 S092-00250 50 19 S092-00251 50 20 S092-00252 50 21 S092-00253 50 22 S092-00254 50 23 S092-00350 50 24 S092-00258 50 25 S092-00259 50 26 S092-00260 50 27 S092-00261 50 28 S092-00262 50 29 S092-00351 50 30 S092-00264 50 31 S092-00265 50 32 S092-00266 50 33 0330-05016-a 50 34 S092-00256 50 35 S092-00257 50 36 S092-00267 50 37 S092-00268 50 38 S092-00269 50 39 S092-00270 50 40 S092-00271 50 41 S092-00272 50 42 S092-00273 50 43 S092-00274 50 44 S092-00275 50 45 S092-00276 50 46 S092-00292 51 S092-00277 51 01 S092-00278 51 02 S092-00279 51 03 S092-00280 51 04 S092-00281 51 05 S092-00282 51 06 0389-08000-a 51 07 0251-08000-a

Please DO NOT Make Copies Of This Manual

Part No.

I.C.

Part Name

WIPER ARM BLADE As NUT CAP BRACKET SCREW WASHER BUSH LINK WASHER RING GASS SPRING RING STOPPER RUBBER COVER CLIP MIRROR SCREW, TAPPING LOCK As LOCK As BRACKET LEVER LOCK SPRING KNOB WASHER SCREW SCREW BRACKET LEVER HARNESS DOOR As DOOR GLASS GLASS SEAL HOOK WASHER,H NUT

SER No, NS3530003~ H36300051~

6-50

Q.ty Applicable Ser. No. Remarks

1 1 2 2 2 4 2 4 1 2 4 1 2 2 1 1 3 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2

PAGE 203

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

CABIN Gp

S091-00088

Key No.

Part No.

I.C.

51 08 S092-00283 51 09 S092-00284 51 10 S092-00285 51 11 0330-06016-a 51 12 S092-00286 51 13 S092-00287 51 14 S092-00183 51 15 S092-00288 51 16 0330-04008-a 51 17 S092-00289 51 18 S092-00290 51 19 S092-00291 51 20 S092-00252 1 S092-00293 2 0350-05016-a 3 S092-00294 4 S092-00295 5 S092-00024 6 0102-06020-a 7 0389-06000-a 8 S092-00296 9 0331-04012-a 10 0263-04000-a 11 0813-09024-0 12 0815-30011-0 13 S093-00087 14 0102-08015-a 15 0389-08000-a 16 0815-30023-0 17 0815-30025-0 18 0813-09024-0 19 S092-00025

PAGE 204

Part Name

COVER FASTENER LOCK SCREW, TAPPING HANDLE HANDLE SCREW KNOB SCREW, TAPPING JOINT DUM HINGE SCREW HEATER SCREW, PAN HEAD DIFFUSEUR DIFFUSEUR COVER, FRONT BOLT WASHER, H LOUVER SCREW, PAN HEAD NUT WEATHER STRIP URETHAN FOAM PLATE BOLT WASHER, H URETHAN FOAM URETHAN FOAM WEATHER STRIP COVER

SER No, NS3530003~ H36300051~

6-50

Q.ty Applicable Ser. No. Remarks

1 4 1 3 1 1 5 1 2 1 1 2 8 1 4 1 1 1 4 4 1 4 4 1 2 1 2 2 3 1 1 1

Please DO NOT Make Copies Of This Manual

PAGE 205

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

HEATER PIPING Gp S091-00005

HEATER PIPING Gp

6-51

S091-00005

Key No.

Part No.

I.C.

20 0102-08020-a 21 0389-08000-a 22 0813-09018-0 23 S092-00026 24 S093-00128 25 S092-00099 26 0102-06015-a 27 0389-06000-a 28 S092-00098 29 0263-04000-a 30 0821-16095-0 31 0821-16210-0 32 0757-32055-0 33 0750-22030-0 34 S092-00141 35 0102-06015-a 36 0389-06000-a 37 S092-00027 38 0759-08500-a 39 S092-00028 40 S092-00029 41 0759-06500-a 42 40901-04190 43 0380-04000-a 44 0815-30005-0 45 0821-16230-0 46 0620-06015-b 1 S092-00323 2 0103-12040-a 3 0389-12000-a 1 S062-00120 2 0102-06016-a 3 0389-06000-a 4 0003-00000-S 5 0330-05008-a 6 0380-05000-a 7 0383-05000-a 8 SP62-00001 9 SP62-00003 10 S062-00121

PAGE 206

Please DO NOT Make Copies Of This Manual

Part Name

BOLT WASHER, H WEATHER STRIP HOSE JOINT BRACKET VALVE, HEATER BOLT WASHER, H CABLE NUT CAR HEATER HOSE CAR HEATER HOSE HOSE, VINYL BAND, JUBILEE PIPE As. BOLT WASHER, H DUCT HOSE BAND, WIRE DUCT HOSE DUCT HOSE BAND, WIRE SWITCH, HEATER WASHER, SPRING URETHAN FOAM CAR HEATER HOSE NIPPLE, HOSE CANOPY As BOLT WASHER, H COVER, FRONT BOLT WASHER, H LATCH SCREW, PAN HEAD WASHER, SPRING WASHER KEY ASSâ&#x20AC;&#x2122;Y PLATE, LOCK COVER

SER No, NS3530003~ H36300051~

6-51

Q.ty Applicable Ser. No. Remarks

2 2 1 1 1 1 1 1 1 2 1 1 2 4 1 2 2 1 2 1 1 4 1 4 2 1 2 1 8 8 1 4 4 1 2 2 2 1 1 1

PAGE 207

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

HEATER PIPING Gp S091-00005 Key No.

Part No.

I.C.

11 0102-08016-a 12 0389-08000-a 1 NSS2-45310-C 2 0103-10020-a 3 0389-10000-a 4 NSS2-45320-A

PAGE 208

Part Name

BOLT WASHER PLATE, SEAT BOLT WASHER, H PLATE

SER No, NS3530003~ H36300051~

6-51

Q.ty Applicable Ser. No. Remarks

3 3 1 4 4 1

Please DO NOT Make Copies Of This Manual

PAGE 209

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

CANOPY Gp S091-00086

CANOPY Gp

6-52

S091-00086

Key No.

PAGE 210

Part No.

I.C.

5 SP66-00006 5 01 * 6 0160-08030-c 7 0160-08020-c

Please DO NOT Make Copies Of This Manual

Part Name

SEAT SEAT BELT BOLT, SOCKET HEAD BOLT, SOCKET HEAD

SER No, NS3530003~ H36300051~

6-52

Q.ty Applicable Ser. No. Remarks

1 1 4 4

Includes Seat belt

PAGE 211

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

CVER Gp-SEAT BOX S061-00078

CVER Gp-SEAT BOX

6-53

S061-00078

Key No.

Part No.

I.C.

8 0251-08000-a 9 0389-08000-a 10 NSS2-45313 11 0102-08020-a 12 0389-08000-a 1 S072-00052 2 NK27-61016-1 3 * 4 0370-04308-a 1 S073-00060 2 11240-06700 3 11240-11880 4 *

PAGE 212

Please DO NOT Make Copies Of This Manual

Part Name

NUT WASHER, H PLATE BOLT WASHER, H LABEL LABEL Ser. NO PLATE RIVET LABEL LABEL LABEL Ser. NO PLATE

SER No, NS3530003~ H36300051~

6-53

Q.ty Applicable Ser. No. Remarks

4 4 1 3 3 2 3 1 4 2 2 1 1

NS35-3 NAGANO H36C HANIX HANIX

PAGE 213

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

SEAT Gp-SLIDING S061-00003

SEAT Gp-SLIDING

6-54

S061-00003

Key No.

PAGE 214

Part No.

I.C.

Part Name

SER No, NS3530003~ H36300051~

Q.ty Applicable Ser. No. Remarks

5 0370-04308-a 1 * 2 S072-00043 3 S072-00044 4 S072-00040 5 0370-04308-a 1 TH-44198

RIVET NAME PLATE HYUNDAI LOGO-B HYUNDAI LOGO-C MODEL NAME RIVET LABEL

4 1 2 1 2 4 2

2 TH-44616 3 TH-47775 4 TH-44615 5 * 6 0370-04308-a

LABEL LABEL LABEL Ser. NO PLATE RIVET

4 1 1 1 4

Please DO NOT Make Copies Of This Manual

6-54

T35S THOMAS THOMAS

PAGE 215

H36C PARTS CATALOGUE

Purchased From T.M. Manuals

MISCELLANEOUS Ar.

PAGE 216

Please DO NOT Make Copies Of This Manual

PAGE 217

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

LABEL Gp-MODEL

7-01

S071-00034

Key No.

Part No.

I.C.

1 AUSA-MH35 2 09-09902-00 3 43-01904-10 4 * 5 0370-04308-a

Part Name

LABEL LABEL LABEL Ser. NO PLATE RIVET

SER No, NS3530003~ H36300051~

7-01

Q.ty Applicable Ser. No. Remarks

2 3 2 1 4

MH35 AUSA AUSA

3, 4

PAGE 218

Please DO NOT Make Copies Of This Manual

PAGE 219

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

LABEL Gp-MODEL

7-01

S071-00038

Key No.

Part No.

I.C.

1 S071-00001 1 01 S072-00002 1 02 S072-00003 1 03 S072-00004 1 04 S072-00005

Part Name

TOOL As BAG, TOOL OPEN END WRENCH(10¥13) OPEN END WRENCH(17¥19) OPEN END WRENCH(19¥22)

SER No, NS3530003~ H36300051~

7-01

Q.ty Applicable Ser. No. Remarks

1 1 1 1 1

4, 5

PAGE 220

Please DO NOT Make Copies Of This Manual

PAGE 221

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

LABEL Gp-MODEL

7-01

S071-00036

Key No.

Part No.

I.C.

1 05 S072-00006 1 06 S072-00007 1 07 S072-00030 1 08 S072-00031 1 09 S072-00032 1 11240-11660

Part Name

SCREW DRIVER PLUG WRENCH(17Â¥19-150L) GREASE GUN As GREASE GUN CARTIDGE, GREASE LABEL

SER No, NS3530003~ H36300051~

7-01

Q.ty Applicable Ser. No. Remarks

1 1 1 1 1 2

Volume:420ml WARNING STAY CLEAR

1, 5

PAGE 222

Please DO NOT Make Copies Of This Manual

PAGE 223

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

LABEL Gp-MODEL

7-01

S071-00055

Key No.

Part No.

I.C.

Part Name

SER No, NS3530003~ H36300051~

7-01

Q.ty Applicable Ser. No. Remarks

2 11240-01630 3 11240-11730 4 11240-11650 5 11240-01600

LABEL LABEL LABEL LABEL

1 1 2 1

LOCK LIFTING DANGER STAY CLEAR P.T.O

6 11240-11640

LABEL

WARING HOT SURFACE

2 4

5, 6

PAGE 224

Please DO NOT Make Copies Of This Manual

PAGE 225

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

LABEL Gp-MODEL

7-01

S071-00056

Key No.

Part No.

I.C.

7 11240-11630 8 11240-12080 9 11240-01580 10 077140267 11 11240-11890

Part Name

LABEL LABEL LABEL LABEL LABEL

SER No, NS3530003~ H36300051~

7-01

Q.ty Applicable Ser. No. Remarks

1 1 1 1 2

WARNING STOP ENGINE FUEL SWING ACCEL REFLECTOR

4, 5

PAGE 226

Please DO NOT Make Copies Of This Manual

PAGE 227

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

TOOL Gp

S071-00001

TOOL Gp

7-03

S071-00001 Key No.

Part No.

I.C.

12 11240-00940 13 11240-11960 14 11240-00630 15 11240-03570 16 11240-11620 17 11240-11970 18 SP67-00010 19 S072-00070 1 SP67-00002 2 11240-12060

PAGE 228

Please DO NOT Make Copies Of This Manual

Part Name

LABEL LABEL LABEL LABEL LABEL LABEL LABEL LABEL LABEL LABEL

SER No, NS3530003~ H36300051~

7-03

Q.ty Applicable Ser. No. Remarks

1 1 1 1 1 3 1 1 1 1

KEY SWITCH HYD OIL DOZER JOYSTICK CONTROL WARNING READ MANUAL HOOK OVER DRIVE CAUTION Lwa 96 Lpa 80

PAGE 229

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

LABEL Gp-STD

7-04

S071-00002

Key No.

15 10

14 17

3 1

1 4

I.C.

3 S072-00050 4 S073-00031 5 S072-00048 1 S092-00232 2 0102-06016-a 3 S092-00233 4 S092-00303 5 0330-05010-a 6 S092-00205 7 S092-00210 8 S092-00228 1 S092-00232 2 0102-06016-a 3 S092-00233 4 S092-00302 5 0330-05010-a 6 S092-00205 7 S092-00210 8 S092-00228

Part Name

LABEL LABEL LABEL BRACKET BOLT HARNESS, JOINT RADIO SCREW, SET COVER FASTENER ANTENNA BRACKET BOLT HARNESS, JOINT RADIO SCREW, SET COVER FASTENER ANTENNA

7-04

Q.ty Applicable Ser. No. Remarks

1 1 1 1 3 1 1 4 1 4 1 1 3 1 1 4 1 4 1

TOPS Lwa 94

for USA

with Screw

for EU

with Screw

8 9 11

Part No.

SER No, NS3530003~ H36300051~

5 18

PAGE 230

Please DO NOT Make Copies Of This Manual

PAGE 231

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

LABEL Gp-CAB

7-50

S071-00033

Key No.

Part No.

I.C.

Part Name

SER No, NS3530003~ H36300051~

7-50

Q.ty Applicable Ser. No. Remarks ~NS3530020 ~H3630139

Speaker

NS3530021~ H3630140~

3 Section A

2 1, 5

4 Console RH

PAGE 232

Please DO NOT Make Copies Of This Manual

PAGE 233

H36C PARTS CATALOGUE

Purchased From T.M. Manuals

ATTACHMENT Ar.

PAGE 234

Please DO NOT Make Copies Of This Manual

PAGE 235

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

RADIO Gp-USA S091-00081

RADIO Gp-USA

9-01

S091-00081

Key No.

PAGE 236

Please DO NOT Make Copies Of This Manual

Part No.

I.C.

Part Name

SER No, NS3530003~ H36300051~

9-01

Q.ty Applicable Ser. No. Remarks

PAGE 237

Purchased From T.M. Manuals

H36C PARTS CATALOGUE

RADIO Gp-EU S091-00080

RADIO Gp-EU

9-02

S091-00080

Key No.

PAGE 238

Please DO NOT Make Copies Of This Manual

Part No.

I.C.

Part Name

SER No, NS3530003~ H36300051~

9-02

Q.ty Applicable Ser. No. Remarks

PAGE 239

H36C PARTS CATALOGUE

Purchased From T.M. Manuals

INDEX

PAGE 240

Please DO NOT Make Copies Of This Manual

PAGE 241

Purchased From T.M. Manuals

H36C PARTS CATALOGUE INDEX

PART-NO.

0003-

KEY-NO.

GROUP-NO.

0003-00000-s 0003-00000-S

14 4

6-02 6-53

0016-01012-P

1-07

0101-06015-a 0101-06016-a

8 18

5-50 1-05

0102-05010-a 0102-05016-a 0102-06012-a 0102-06015-a 0102-06016-a 0102-06016-a 0102-06016-a 0102-06016-a 0102-06016-a 0102-06016-a 0102-06016-a 0102-06020-a 0102-06020-a 0102-06020-a 0102-06045-a 0102-06055-a 0102-08010-a 0102-08012-a 0102-08012-a 0102-08012-a 0102-08015-a 0102-08015-a 0102-08016-a 0102-08016-a 0102-08016-a 0102-08016-a 0102-08016-a 0102-08016-a 0102-08016-a 0102-08016-a 0102-08016-a 0102-08016-a 0102-08016-a 0102-08016-a 0102-08016-a 0102-08020-a 0102-08020-a 0102-08020-a 0102-08020-a 0102-08020-a 0102-08020-a 0102-08020-a 0102-08020-a

6 4 35 26, 35 17 16, 19, 33, 36 22 107, 156 2 2 2 23 4 6 6 3 41 37 23 7 35 14 14 7 13 26, 29 6 2 6 11 8, 11 5 8 144 11 20 2, 9 19 2, 5 18 2 2 10

1-02 6-11 1-02 6-51 1-01 1-04 4-04 6-50 6-53 9-01 9-02 1-02 6-09 6-51 6-04 5-51 1-04 1-02 1-03 6-11 6-04 6-51 1-01 1-03 1-04 1-05 1-06 1-08 2-06 4-04 6-01 6-02 6-12 6-50 6-53 1-02 1-04 4-01 4-03 4-04 5-07 5-09 5-23

001601010102-

PAGE 242

INDEX PART-NO.

KEY-NO.

0102-08020-a 0102-08020-a 0102-08020-a 0102-08020-a 0102-08020-a 0102-08020-a 0102-08020-a 0102-08020-a 0102-08020-a 0102-08020-a 0102-08020-a 0102-08020-a 0102-08020-a 0102-08025-a 0102-08025-a 0102-08025-a 0102-08030-a 0102-08030-a 0102-08030-a 0102-08065-a 0102-10025-a

2, 5 10 5 11, 28 2 1 1 4 2 2, 5 168 20 11 22 112 126 18 11 105 17 10

0103-06025-a 0103-08020-a 0103-10016-a 0103-10016-a 0103-10016-a 0103-10020-a 0103-10020-a 0103-10020-a 0103-10020-a 0103-10020-a 0103-10020-a 0103-10020-a 0103-10020-a 0103-10020-a 0103-10020-a 0103-10020-a 0103-10020-a 0103-10020-a 0103-10025-a 0103-10025-a 0103-10025-a 0103-10025-a 0103-10025-a 0103-10025-a 0103-10025-a 0103-10025-a 0103-10030-a 0103-10030-a 0103-10030-a 0103-10035-a

3 9 3 9 2 14 7 22 6 2 25 5 2 3 2 2, 7 5 2 2 2 25 4 15 3 5 147 5 11 2 10

0103-

GROUP-NO.

5-50 5-53 6-01 6-04 6-05 6-07 6-08 6-10 6-12 6-13 6-50 6-51 6-54 1-04 5-03 6-50 2-02 6-09 6-50 1-02 5-51 5-06 3-01 3-01 4-01 5-05-3 1-02 1-05 2-01 3-01 3-09 4-01 6-03 6-04 6-06 6-09 6-10 6-12 6-54 1-02 1-03 1-04 1-05 2-02 3-51 5-07 6-50 2-50 5-07 5-08 6-02

PART-NO.

KEY-NO.

GROUP-NO.

0103-10065-a 0103-10080-a 0103-10080-a 0103-10080-a 0103-10090-a 0103-10110-a 0103-12020-a 0103-12020-a 0103-12025-a 0103-12025-a 0103-12025-a 0103-12025-a 0103-12025-a 0103-12025-a 0103-12025-a 0103-12030-a 0103-12030-a 0103-12030-a 0103-12035-a 0103-12035-a 0103-12040-a 0103-12075-a 0103-12080-a 0103-16035-a 0103-16045-a

2 8 4 6 7 3 2 3 11 8, 12 9 5 5 5, 10 2 2 2 2 2 2 2 3, 6 4 5 3

0104-12030-a 0104-16075-c

6 7

1-01 6-50

0108-10020-a 0108-10025-a 0108-12020-a 0108-12030-a 0108-14085-a

22 6 29 12, 15 2

4-01 4-01 4-01 4-01 1-07

0160-04008-a 0160-05018-a 0160-06050-a 0160-08016-a 0160-08020-c 0160-08030-c 0160-10020-c 0160-10030-a 0160-10030-e 0160-12020-a

116 231 408 1016 7 6 111 7 3 115

02-000141 02-000151

101 102

2-50 2-50

0212-12030-a

103

2-50

0238-24000-a

102

3-04

01040108-

0160-

02-

02120238-

Please DO NOT Make Copies Of This Manual

3-06 2-04 2-51 5-05-3 4-04 2-51 2-05 2-06 1-01 2-01 2-02 2-03 2-52 3-08 6-02 5-01 5-03 5-04 3-07 4-04 6-52 3-02 6-50 2-01 5-02

5-08 5-05-2 5-07 5-07 6-54 6-54 5-03 5-01 4-01 5-08

PART-NO.

0251-

KEY-NO.

GROUP-NO.

0251-06000-a 0251-06000-a 0251-08000-a 0251-08000-a 0251-08000-a 0251-08000-a 0251-08000-a 0251-08000-a 0251-10000-a 0251-10000-a 0251-10000-a 0251-10000-f

7 5 19 19 2 12 139, 5107 8 9 12 131, 5005 19

6-04 6-09 2-02 4-04 6-03 6-09 6-50 6-54 4-04 6-02 6-50 6-04

0255-10000-a 0255-10000-a 0255-10000-a 0255-12000-a

9 5 3 4

2-04 2-51 3-06 4-02

0257-08000-a 0257-14000-f 0257-14000-f 0257-16000-a

10 2 10 10

1-05 6-06 6-10 6-09

0263-04000-a 0263-08000-a

10, 29 124

0275-20000-a

108

3-05

0294-30000-a

2-02

0311-12000-a

104

2-50

0330-03008-a 0330-03016-a 0330-04008-a 0330-04010-a 0330-04012-a 0330-04025-a 0330-05008-a 0330-05008-a 0330-05010-a 0330-05010-a 0330-05010-a 0330-05016-a

115 8 5116 102 110, 112, 114 31 15 5 162 5 5 128, 5033, 5111

6-50 6-08 6-50 6-50 6-50 6-04 6-02 6-53 6-50 9-01 9-02 6-50

0331-04012-a

6-51

0333-04016-e 0333-04016-e

24 7

6-04 6-05

0255-

0257-

0263027502940311-

0330-

033103330340-

6-51 5-05-1

PAGE 243

Purchased From T.M. Manuals

H36C PARTS CATALOGUE INDEX

PART-NO.

KEY-NO.

GROUP-NO.

0340-04008-a

1017

5-07

0345-04025-a

6-05

0350-05016-a

6-51

0380-03000-a 0380-04000-a 0380-04000-a 0380-05000-a 0380-05000-a 0380-05000-a 0380-08000-a

9 32 43 7 17 6 113

6-08 6-04 6-51 1-02 6-02 6-53 5-03

0381-12000-a 0381-20000-a

105 110

2-50 3-05

0382-04000-a 0382-06000-a 0382-08000-a 0382-10000-a

1018 117 1019 118

5-07 5-08 5-07 5-08

0383-03000-a 0383-04000-a 0383-04000-a 0383-05000-a 0383-05000-a 0383-05000-a 0383-20000-a 0383-30000-a

10 33 10 16 5 7 109 6

6-08 6-04 6-05 6-02 6-11 6-53 3-05 2-02

0387-08000-a 0387-10000-a 0387-10000-a 0387-16000-a

25 26 5 9

6-04 1-04 1-05 6-09

0388-06000-c 0388-08000-c

25 35

1-02 1-05

0389-06000-a 0389-06000-a 0389-06000-a 0389-06000-a 0389-06000-a 0389-06000-a 0389-06000-a 0389-06000-a 0389-06000-a 0389-06000-a 0389-08000-a 0389-08000-a 0389-08000-a

18 24, 36 17, 20, 34, 37 19 23 4 9 4 7, 27, 36 3 15 18, 21, 38 8, 24

1-01 1-02 1-04 1-05 4-04 5-06 5-50 5-51 6-51 6-53 1-01 1-02 1-03

034503500380-

03810382-

0383-

0387-

03880389-

PAGE 244

INDEX PART-NO.

0389-08000-a 0389-08000-a 0389-08000-a 0389-08000-a 0389-08000-a 0389-08000-a 0389-08000-a 0389-08000-a 0389-08000-a 0389-08000-a 0389-08000-a 0389-08000-a 0389-08000-a 0389-08000-a 0389-08000-a 0389-08000-a 0389-08000-a 0389-08000-a 0389-08000-a 0389-08000-a 0389-08000-a 0389-08000-a 0389-08000-a 0389-08000-a 0389-08000-a 0389-08000-a 0389-08000-a 0389-08000-a 0389-08000-a 0389-08000-a 0389-10000-a 0389-10000-a 0389-10000-a 0389-10000-a 0389-10000-a 0389-10000-a 0389-10000-a 0389-10000-a 0389-10000-a 0389-10000-a 0389-10000-a 0389-10000-a 0389-10000-a 0389-10000-a 0389-10000-a 0389-10000-a 0389-10000-a 0389-10000-a 0389-10000-a 0389-10000-a 0389-10000-a 0389-10000-a

KEY-NO.

GROUP-NO.

3, 10, 14, 23, 42 1-04 11, 27, 30 1-05 7 1-06 3 1-08 20 2-02 7 2-06 10 3-01 20 4-01 3, 6 4-03 12 4-04 3 5-07 3 5-09 11 5-23 3, 6 5-50 11 5-53 6, 9, 12 6-01 6 6-02 3 6-03 12, 29, 36 6-04 3 6-05 2 6-07 2 6-08 5 6-10 8 6-11 3, 9 6-12 3, 6 6-13 104, 122, 5106 6-50 15, 21 6-51 12 6-53 9, 12 6-54 3, 15 1-02 3 1-03 8 1-05 23 2-01 16 2-02 2-50 6 4, 7 3-01 4 3-06 3 3-09 4 3-51 7, 10, 23, 26 4-01 8 4-04 8 5-01 3 5-05-3 6, 12 5-07 3 5-08 11 5-51 11 6-02 6 6-03 3, 16 6-04 4 6-06 3 6-09

PART-NO.

KEY-NO.

GROUP-NO.

0389-10000-a 0389-10000-a 0389-10000-a 0389-10000-a 0389-12000-a 0389-12000-a 0389-12000-a 0389-12000-a 0389-12000-a 0389-12000-a 0389-12000-a 0389-12000-a 0389-12000-a 0389-12000-a 0389-12000-a 0389-12000-a 0389-12000-a 0389-12000-a 0389-12000-a 0389-12000-a 0389-12000-a 0389-16000-a 0389-16000-a

3, 8 6 130, 146 3 7, 12 9, 13 10 6 3 4 6 7 3 6, 11 13, 16, 30 3 3 3 3 3 3 4 8

6-10 6-12 6-50 6-54 1-01 2-01 2-02 2-03 2-05 2-06 2-52 3-02 3-07 3-08 4-01 4-04 5-01 5-03 5-04 6-02 6-52 5-02 6-50

0390-16000-c

6-09

04-103761 04-103771

107 108

2-50 2-50

0420-02020-0 0420-05045-0 0420-25016-0

17 101 121

6-04 3-04 5-08

0425-03006-0 0425-03006-0 0425-10060-0

1021 120 107

5-07 5-08 3-03

0426-25064

1020

5-07

0445-03000-0 0445-03500-o

107 107

3-06 3-05

0446-05200-0 0446-06200-0 0446-07000-o 0446-07200-0

116 108 106 106

3-04 3-06 3-05 3-03

0460-62035-0 0460-62035-0

104 104

3-03 3-05

0480-20015-0

6-04

039004-

0420-

0425-

042604450446-

046004800490-

Please DO NOT Make Copies Of This Manual

PART-NO.

KEY-NO.

GROUP-NO.

0490-00007-b 0490-00008-a 0490-00008-b 0490-00008-b 0490-00010-a 0490-00010-a 0490-00011-b 0490-00011-b 0490-00011-b 0490-00012-b 0490-00012-b 0490-00014-b 0490-00016-b 0490-00018-b 0490-00022-b 0490-00022-b 0490-00022-b 0490-00022-b 0490-00024-b 0490-00029-a 0490-00038-a 0490-00070-b

109 103 111 404 1023 123 106, 107 110 407 105 109 106 1024 122 108 128 128 121 124 27 5 108

5-01 5-04 5-01 5-07 5-07 5-08 5-01 5-04 5-07 5-01 5-04 5-04 5-07 5-05-1 5-04 5-10 5-11 5-12 5-08 1-03 5-01 5-03

0491-00040-b 0491-00055-b 0491-00070-b 0491-00075-b 0491-00075-b 0491-00075-b 0491-00075-b 0491-00075-b 0491-00080-b 0491-00080-b 0491-00080-b 0491-00085-b 0491-00090-b 0491-00100-a 0491-00125-a 0491-00170-a

112 110 108 104 108, 116 108, 116 110 108 110 110 110 108 110 106 6 104

3-04 5-01 5-12 5-01 5-10 5-11 5-12 5-13 5-10 5-11 5-13 5-14 5-14 5-03 1-03 5-04

0493-40050-h 0493-45055-h 0493-80094-d

102 102 109

2-03 2-02 5-03

0494-07040-b

113

3-04

0495-35072-a 0495-35072-a

105 105

3-03 3-05

0540-02000-F 0540-02000-F

4 4

1-01 1-08

0491-

0493-

049404950540-

PAGE 245

Purchased From T.M. Manuals

H36C PARTS CATALOGUE INDEX

PART-NO.

KEY-NO.

GROUP-NO.

0540-02000-F 0540-02000-F 0540-02000-F 0540-02000-F 0540-02000-F 0540-02000-F 0540-02000-F 0540-02000-F 0540-02000-F 0540-02000-F 0540-02000-F

2 2 7 2 2 119 132 132 125 118 118

2-02 2-03 2-04 2-51 2-52 3-04 5-10 5-11 5-12 5-13 5-14

0541-02000-F

119

5-14

0542-02000-F 0542-02000-F 0542-02000-F

4 7 126

2-04 3-08 5-12

0545-02000-h 0545-04000-h

9 110

1-01 5-03

0546-08000-H

5-09

0547-04000-0 0547-12000-0

10 21

5-01 1-03

0549-08000-Y

5-50

0560-04006-H 0560-12012H

16 25

5-05-3 1-03

0562-04004-H

5-05-3

0563-12008-H 0563-12008-L

17 24

1-03 5-05-3

0567-16012-L

1-03

0568-12012-H

1-03

0575-06006-0

5-05-3

0576-04004-X 0576-06006-X

28 7

5-05-3 5-02

0580-04004-X 0580-06006-X 0580-08008-X 0580-12008-X

34 17 5 26

5-05-3 5-05-3 5-09 1-03

0582-16012-X

1-03

05410542-

054505460547054905600562056305670568057505760580-

0582-

PAGE 246

INDEX PART-NO.

0600-

KEY-NO.

GROUP-NO.

0600-04004-x 0600-04004-X 0600-04004-X 0600-04004-X 0600-04004-X 0600-06004-X 0600-06006-X 0600-06006-X 0600-06006-X 0600-06008-X 0600-08008-X 0600-08008-x 0600-08008-X 0600-08012-X

5 39 7, 14 3 7 11 7 2 2 18 7 4 10 11

5-04 5-05-3 5-07 5-13 5-51 5-05-3 5-05-3 5-10 5-12 5-05-3 5-03 5-04 5-50 5-50

0601-04004-X 0601-04004-X 0601-04004-X 0601-04004-X 0601-04004-X 0601-04004-X 0601-04006-X 0601-06006-X 0601-06006-X 0601-06006-X 0601-08008-X

11 6 29 13 4 6 19 20 5 35 9

5-01 5-02 5-05-3 5-07 5-08 5-51 1-03 1-03 5-02 5-05-3 5-03

0602-04004-X 0602-04004-X 0602-04004-X 0602-04004-X 0602-04004-X 0602-04004-X 0602-04004-X 0602-04006-X 0602-06004-X 0602-06008-X 0602-08008-X

10, 12 26, 30, 40 8 5 2 2 5 8 20 8, 9 4

5-03 5-05-3 5-07 5-08 5-13 5-14 5-51 5-03 5-05-3 5-05-3 5-03

0603-04004-X 0603-04004-X 0603-04004-X 0603-04004-X 0603-06004-X 0603-06006-X 0603-06008-X

5 27 9 6 10 25 12

5-03 5-05-3 5-07 5-08 5-05-3 5-05-3 5-05-3

0604-06004-0 0604-06006-0

31 14

5-05-3 5-05-3

0601-

0602-

0603-

0604-

PART-NO.

KEY-NO.

GROUP-NO.

0604-16012-0

5-05-3

0607-04004-X

5-03

0620-04000-F 0620-06015-b 0620-08014-F 0620-08014-F

31 46 18 36

4-04 6-51 1-03 5-05-3

0627-04004-X

5-06

0647-20000-H

5-01

0695-44074-X 0695-64053-X 0695-66061-X 0695-68060-X

6 21 13 19

0730-02004-0

1-08

0731-02004-0

1-08

0750-13020-0 0750-13020-0 0750-22030-0 0750-22030-0 0750-35050-0

33 4 7 33 9

1-02 1-06 5-16 6-51 5-15

0751-06310-0

1-06

0753-08045-0 0753-08050-0 0753-08060-0 0753-08250-0

30 31 29 1

1-02 1-02 1-02 1-06

0754-04055-0 0754-04150-0 0754-04170-0

7 9 8

1-08 1-08 1-08

0757-04002-0 0757-10017-0 0757-32055-0

3 11 32

1-06 1-02 6-51

0759-03800-b 0759-04000-b 0759-04600-b 0759-05200-b 0759-05800-b 0759-06300-b 0759-06500-a 0759-08500-a

26 25 38 8 7 29 41 38

4-04 4-04 4-04 4-03 4-03 4-04 6-51 6-51

06070620-

062706470695-

073007310750-

07510753-

0754-

0757-

0759-

Please DO NOT Make Copies Of This Manual

5-03 5-05-3 5-05-3 5-05-3

PART-NO.

0760-

KEY-NO.

GROUP-NO.

0760-11500-0 0760-11500-0 0760-12500-0

12 32 32

1-02 4-04 1-02

077140267

7-04

0801-20017-0

6-08

0805-35150-B 0805-35150-B 0805-48300-B 0805-50250-B 0805-50250-B 0805-78365-B 0805-78365-B 0805-78365-B 0805-78365-B 0805-78365-B 0805-78365-B 0805-78365-B 0805-78365-B 0805-78365-B 0805-78365-B 0805-78365-B

39 10 25 31 8 10 8 20 5 4 4 6 13 7 14 14

1-02 1-08 1-01 1-05 1-06 5-15 5-16 5-17 5-18 5-19 5-20 5-24 5-25 5-26 5-27 5-52

0813-03200-0 0813-07026-0 0813-09018-0 0813-09024-0 0813-09024-0

39 10 22 11 18

1-04 6-12 6-51 6-51 6-51

0815-15100-1 0815-30005-0 0815-30011-0 0815-30023-0 0815-30024-0 0815-30025-0 0815-30042-0 0815-30052-0 0815-30058-0 0815-30063-0

2 44 12 16 36 17 37 34 33 35

6-50 6-51 6-51 6-51 4-04 6-51 4-04 4-04 4-04 4-04

0816-13180-0 0816-13240-0 0816-13540-0 0816-13850-0 0816-19140-0

22 23 21 20 38

1-01 1-01 1-01 1-01 1-04

0821-16095-0 0821-16210-0 0821-16230-0

30 31 45

6-51 6-51 6-51

0771

08010805-

0813-

0815-

0816-

0821-

PAGE 247

Purchased From T.M. Manuals

H36C PARTS CATALOGUE INDEX

PART-NO.

0827-

KEY-NO.

GROUP-NO.

0827-35015-a 0827-35015-a 0827-35015-a 0827-35015-a 0827-35015-a 0827-60700-a

19 3 3 13 13 24

5-17 5-19 5-20 5-27 5-52 1-01

0851-01003-0 0851-01005-0 0851-01010-0 0851-01015-0 0851-01020-0

1601 1602 1302, 1603 1604 1605

1-05 1-05 1-05 1-05 1-05

0852-00060-0

1301

1-05

0909-00000

1-04

0942-00003-0 0942-00003-0 0942-00003-0 0942-00003-0 0942-00003-0 0942-00004-0

13, 16 34 22 25 5 5

1-01 1-02 1-03 1-05 1-06 4-01

10-030010

2-06

11240-00630 11240-00940 11240-01580 11240-01600 11240-01630 11240-03570 11240-06700 11240-11620 11240-11640 11240-11650 11240-11660 11240-11730 11240-11880 11240-11890 11240-11960 11240-11970 11240-12060 11240-12080

14 12 9 5 2 15 2 16 6 4 1 3 3 11 13 17 2 8

7-04 7-04 7-04 7-04 7-04 7-04 7-01 7-04 7-04 7-04 7-04 7-04 7-01 7-04 7-04 7-04 7-50 7-04

11-3208700-2

101

2-06

11430-01620

4-04

12002-01570

1702

6-05

0851-

085209090942-

10-

11240-

11-

11430-

12002-

PAGE 248

INDEX PART-NO.

12-

KEY-NO.

GROUP-NO.

PART-NO.

3-08 3-08 3-08

2-50 2-51

MBC4-12101 MBC4-26007 MBC4-26008

2 24 27

4-02 4-04 4-04

2-06

MBU1-46000

3-06

904-00002-3

1-05

933-59007

2-06

952-66001

106

2-50

9NU1-10001

3-07

B10234-No. 3

103

3-51

DRS7-20400

1-05

HBA1-30003-1

114

5-03

MBU3-00020 MBU3-00021 MBU3-00022 MBU3-00022 MBU3-00022 MBU3-00022 MBU3-00022 MBU3-00023 MBU3-00023 MBU3-00023 MBU3-00023 MBU3-00023 MBU3-00024 MBU3-00025

14 15 16 21 7 10 7 17 22 8 11 8 18 19

2-01 2-01 2-01 2-02 2-03 2-04 2-52 2-01 2-02 2-03 2-04 2-52 2-01 2-01

HBA2-00100

1-01

HCA1-30000-2 HCA1-30001-1 HCA1-30002-2 HCA1-30100-2 HCA1-42000 HCA1-42001

1 101 102 105 1 101

5-03 5-03 5-03 5-03 3-03 3-03

MBU4-10004 MBU4-10005 MBU4-12102

11 14 3

4-01 4-01 4-02

MBU5-71000

1-03

MBU6-24001 MBU6-27001

6-07 6-07

HCA2-00001-1 HCA2-00002-1 HCA2-70100

2 3 12

1-05 1-05 1-04

ME30-

5 6

ME30-028401-1

6-04

NAS8-

NAS2-20100

1-03

NAS8-00010 NAS8-00011

9 5

1-02 1-02

NAS9-50003 NAS9-50004

8 9

5-51 5-51

NB46-030902

2-02

NCU1-00001

3-09

NFS7-01100 NFS7-01110

13 1301

1-03 1-03

8835-030041 8835-060001

2 1

902-00450

17P-B-22500 17P-B-22510 17P-B-22520 17P-B-22530 17P-B-68290 17P-B-68300 17P-B-68310

115 103 111 117 104 114 118

3-04 3-04 3-04 3-04 3-04 3-04 3-04

30554-61024 30554-62020

9 9

1-03 5-01

30809-00438

2-51

40701-00360

1-03

40901-03940 40901-04010 40901-04160 40901-04190

9 16 17 42

6-50 1-05 1-05 6-51

41301-01240 41301-01430 41301-01610 41301-01610 41301-01720

10 10 1 9 5

1-03 1-02 6-06 6-10 1-04

466-02002

1-05

562-00900

1-02

8522-010011 8522-012002 8522-012010 8522-015000-3 8522-015001 8522-015002-3 8522-015003-2 8522-030021 8522-030021 8522-030021

2 102 103 1 101 102 103 101 301 101

3-51 3-03 3-03 3-05 3-05 3-05 3-05 2-03 2-04 2-52

870-00007 870-00008

13 13

6-09 6-04

MBC3-

8822-010002 8822-010012 8822-010012 8822-013100-1

5 19 2 2

3-01 1-01 5-02 3-03

40901-

41301-

466562-

8522-

870-

8822-

GROUP-NO.

2 3 8

5-03 5-03 2-50 2-50

2-02

40701-

KEY-NO.

MBC3-60100 MBC3-60200 MBC3-60400

103 104 3 4

30809-

PART-NO.

8822-017003 8822-017004 8822-030042 8822-030043

12-032021

30554-

GROUP-NO.

17P-

KEY-NO.

8835902904933952-

9NU1-

B10234DRS7-

HBA1HBA2HCA1-

HCA2-

HCA3

HCA3-60001 HCA3-60004

3 4

2-01 2-01

HCA5-00008 HCA5-00200

8 11

5-15 2-02

MBC1-70001

3-01

MBC3-00001-1 MBC3-00001-1 MBC3-00001-1 MBC3-00001-1 MBC3-00001-1 MBC3-00001-1

10 7, 11 8 4 4 4, 9

1-01 2-01 2-02 2-03 2-52 3-08

HCA5-

MBC1-

Please DO NOT Make Copies Of This Manual

MBC4-

MBU1MBU3-

MBU4-

MBU5MBU6-

NAS2-

NAS9NB46-

NCU1NFS7-

PAGE 249

Purchased From T.M. Manuals

H36C PARTS CATALOGUE INDEX

PART-NO.

NFSH-

KEY-NO.

GROUP-NO.

NFSH-42003 NFSH-42900 NFSH-80001

10 9 15

6-04 6-04 6-04

NHS6-40028

6-04

NK27-25002 NK27-71600 NK27-72000 NK27-80005 NK27-80007 NK27-80100 NK27-80110 NK27-81100 NK27-89001

9 33 1 40 4 1 110 17 107

NK30-80002

3-02

NOS1-00002-1

3-01

NOS2-00005 NOS2-00300 NOS2-42002 NOS2-42003 NOS2-50005 NOS2-50006

3 1 20 14 27 28

1-07 1-08 6-04 6-04 1-04 1-04

NPS2-00006 NPS2-00007 NPS2-00009 NPS2-00604 NPS2-10109 NPS2-30011 S012-00219 NPS2-50008 NPS2-50200

4 5 8 43 101 18 32 31 24

1-07 1-07 1-04 1-04 1-01 4-01 1-04 1-04 1-04

NPS3-60600 NPS3-60900 NPS3-60900 NPS3-60900

8 3 3 3

1-01 2-02 2-03 2-52

NPS4-10001

6-04

NPS5-00010

5-05-3

NPS7-01100-1

5-50

NPS9-51300 NPS9-51400 NPS9-53001

1 4 1

5-09 5-09 5-50

NHS6NK27-

NK30-

NOS1NOS2-

NPS2-

NPS3-

NPS4NPS5NPS7NPS9-

PAGE 250

6-02 5-05-3 5-51 1-04 1-02 3-04 3-04 4-01 5-03

INDEX PART-NO.

KEY-NO.

GROUP-NO.

NPS9-53002

5-50

NQS1-41000-2

3-50

NQS2-00200 NQS2-00201 NQS2-00202

6 601 602

1-07 1-07 1-07

NQS3-00001 NQS3-00002 NQS3-10002 NQS3-20001 NQS3-21000-1 NQS3-40001 NQS3-41000 NQS3-42000 NQS3-43000 NQS3-51000 NQS3-60001 NQS3-60400 NQS3-60500 NQS3-60700 NQS3-60800 NQS3-61000-1 NQS3-61100

1 24 21 101 1 302 1 2 3 1 5 2 10 20 6 4 7

2-05 2-01 2-01 2-02 2-02 2-04 2-04 2-04 2-04 2-50 2-04 2-01 2-01 2-01 2-01 2-02 2-02

NQS5-15100-1 NQS5-15300

12 13

2-02 2-02

NQS9-51200 NQS9-51200 NQS9-51300 NQS9-51300 NQS9-51400 NQS9-51400

7 7 8 8 9 9

5-23 5-53 5-23 5-53 5-23 5-53

NRS3-00004

2-05

NRS9-20069

6-50

NSS2-41004 NSS2-45010 NSS2-45110 NSS2-45120 NSS2-45150 NSS2-45200 NSS2-45310-C NSS2-45313 NSS2-45320-A NSS2-45510 NSS2-45513

7 1 1 7 6 6 1 10 4 3 5

6-06 6-10 6-09 6-09 6-09 6-10 6-54 6-54 6-54 6-08 6-08

NQS1NQS2-

NQS3-

NQS5NQS9-

NRS3NRS9NSS2-

PART-NO.

KEY-NO.

GROUP-NO.

NSS2-45520 NSS2-45525 NSS2-45530 NSS2-45540 NSS2-45860 NSS2-45870 NSS2-45880 NSS2-45920 NSS2-45930 NSS2-45950 NSS2-45960 NSS2-45970

4 6 3 4 8 1 5 5 6 22 23 1

6-08 6-08 6-07 6-07 6-04 6-05 6-04 6-05 6-05 6-04 6-04 6-11

NSS7-01400-1 NSS7-01500-1

10 1

5-07 5-08

PA-2024 PA-2029 PA-2030 PA-2031 PA-2033 PA-2036 PA-2442 PA-2520 PA-2521 PA-2522

106 103 104 101 105 102 102 1201 1202 1203

3-06 3-06 3-06 3-06 3-06 3-06 2-52 1-03 1-03 1-03

S012-00015 S012-00116 S012-00122 S012-00204 S012-00205 NPS2-50002 S012-00247 S012-00257 S012-00259 S012-00260 S012-00277 S012-00278 S012-00289 S012-00290 S012-00321 S012-00322 S012-00329 S012-00338 S012-00405 S012-00501 S012-00502 S012-00503 S012-00504 S012-00505 S012-00506

34 21 15 6 8 35 1 1 1 11 2 3 13 12 1 30 1 5 17 26 2601 2602 2603 2604 2605

1-05 1-04 1-04 1-05 4-01 1-04 1-09 1-03 1-02 1-04 1-01 1-01 1-05 1-05 1-04 1-04 1-01 1-03 6-05 1-01 1-01 1-01 1-01 1-01 1-01

NSS7PA-

S012-

Please DO NOT Make Copies Of This Manual

PART-NO.

KEY-NO.

GROUP-NO.

S012-00507 S012-00508 S012-00509 S012-00510 S012-00511 S012-00512 S012-00513 S012-00514 S012-00518 S012-00519 S012-00520 S012-00521 S012-00536

2606 44 4401 4402 4403 8 801 802 9 901 902 39 28

1-01 1-04 1-04 1-04 1-04 1-07 1-07 1-07 1-07 1-07 1-07 4-04 1-03

S013-00065 S013-00131 S013-00136 S013-00346 S013-00665 S013-00666 S013-00667 S013-00668 S013-00669 S013-00761

29 18 15 1 201 202 203 204 205 206

1-04 1-04 1-05 1-07 1-01 1-01 1-01 1-01 1-01 1-01

S022-00027 S022-00028 S022-00029 S022-00085

1 1 101 1

2-03 2-01 2-01 2-52

S032-00036 S032-00045 S032-00110

1 1 5

3-01 3-08 3-02

S042-00014 S042-00015 S042-00016 S042-00017 S042-00057 S042-00080 S042-00087 S042-00088 S042-00097 S042-00100 S042-00101 S042-00102 S042-00110 S042-00112 S042-00122 S042-00125 S042-00126

21 19 16 22 30 13 13 10 101 1901 2201 101 6 32 102 34 24

4-04 1-02 1-02 1-02 4-04 1-02 4-04 4-04 4-01 1-02 1-02 4-03 4-04 4-01 4-01 4-01 4-01

S013-

S022-

S032-

S042-

PAGE 251

Purchased From T.M. Manuals

H36C PARTS CATALOGUE INDEX

PART-NO.

KEY-NO.

GROUP-NO.

S042-00127 S042-00128 S042-00134 S042-00145 S042-00153 S042-00154 S042-00155 S042-00156 S042-00174 S042-00175 S042-00176 S042-00177 S042-00178 S042-00179 S042-00181 S042-00184 S042-00185 S042-00186 S042-00187 S042-00188 S042-00189 S042-00190 S042-00192 S042-00193 S042-00240

28 5 103 4 17 15 16 1 14 20 1601 104 105 1 27 4 31 3101 3102 3103 33 21 1 9 1

4-01 4-04 4-01 4-03 4-04 4-04 4-04 4-04 4-04 4-04 1-02 4-01 4-01 4-03 4-01 4-01 4-01 4-01 4-01 4-01 4-01 4-01 4-01 4-03 4-50

S043-00025 S043-00027 S043-00029 S043-00030

10 4 33 32

4-03 4-04 1-05 1-05

S044-00001 S044-00002 S044-00003

201 202 203

4-01 4-01 4-01

S052-00017 S052-00080 S052-00081 S052-00082 S052-00083 S052-00146 S052-00148 S052-00150 S052-00156 S052-00248 S052-00383 S052-00383 S052-00410 S052-00412 S052-00429 S052-00430 S052-00431

4 1 2 3 4 234 254 251 235 37 1 4 1 4 1 1 1

5-07 5-26 5-26 5-26 5-26 5-05-2 5-05-2 5-05-2 5-05-2 5-05-3 5-05-1 5-05-3 5-02 5-01 5-10 5-11 5-12

S043-

S044-

S052-

PAGE 252

INDEX PART-NO.

S052-00432 S052-00433 S052-00442 S052-00447 S052-00448 S052-00449 S052-00472 S052-00473 S052-00498 S052-00499 S052-00500 S052-00501 S052-00502 S052-00503 S052-00504 S052-00505 S052-00509 S052-00511 S052-00512 S052-00513 S052-00514 S052-00516 S052-00518 S052-00519 S052-00523 S052-00524 S052-00525 S052-00528 S052-00529 S052-00532 S052-00533 S052-00535 S052-00537 S052-00539 S052-00633 S052-00634 S052-00635 S052-00636 S052-00637 S052-00638 S052-00639 S052-00640 S052-00641 S052-00642 S052-00794 S052-00850 S052-50000 S052-50001 S052-50002 S052-50003 S052-50004 S052-50005

KEY-NO.

1 1 103 102 105 107 118 119 101, 201 102, 202 103, 203 104, 204 105, 205 106, 206 107, 207 108, 208 1004 1007 1006 1008 1009 1011 1013 1014 1025 101 102 105 106 109 110 112 114 125 401 402 403 405 406 409 410 411 412 413 1 1 1 2 3 4 5 6

GROUP-NO.

5-13 5-14 5-01 5-04 5-04 5-04 5-05-1 5-05-1 5-06 5-06 5-06 5-06 5-06 5-06 5-06 5-06 5-07 5-07 5-07 5-07 5-07 5-07 5-07 5-07 5-07 5-08 5-08 5-08 5-08 5-08 5-08 5-08 5-08 5-08 5-07 5-07 5-07 5-07 5-07 5-07 5-07 5-07 5-07 5-07 5-04 5-01 5-15 5-15 5-15 5-15 5-15 5-15

PART-NO.

Please DO NOT Make Copies Of This Manual

S052-50006 S052-50007 S052-50008 S052-50009 S052-50010 S052-50011 S052-50014 S052-50015 S052-50016 S052-50017 S052-50018 S052-50018 S052-50019 S052-50019 S052-50020 S052-50022 S052-50023 S052-50024 S052-50025 S052-50026 S052-50027 S052-50028 S052-50029 S052-50030 S052-50031 S052-50032 S052-50033 S052-50034 S052-50035 S052-50037 S052-50037 S052-50038 S052-50038 S052-50039 S052-50040 S052-50041 S052-50041 S052-50042 S052-50042 S052-50043 S052-50043 S052-50044 S052-50045 S052-50046 S052-50046 S052-50055 S052-50056 S052-50070 S052-50071 S052-50084 S052-50085 S052-50086

KEY-NO.

7 1 2 3 4 5 1 2 3 4 11 11 12 12 6 5 6 7 8 9 10 11 12 13 14 15 16 17 18 1 1 2 2 3 4 5 5 6 6 7 7 8 9 10 10 1 2 5 6 1 2 1

GROUP-NO.

5-15 5-16 5-16 5-16 5-16 5-16 5-17 5-17 5-17 5-17 5-27 5-52 5-27 5-52 5-16 5-17 5-17 5-17 5-17 5-17 5-17 5-17 5-17 5-17 5-17 5-17 5-17 5-17 5-17 5-27 5-52 5-27 5-52 5-27 5-27 5-27 5-52 5-27 5-52 5-27 5-52 5-27 5-27 5-27 5-52 5-19 5-19 5-26 5-26 5-20 5-20 5-18

PART-NO.

KEY-NO.

S052-50087 S052-50088 S052-50089 S052-50090 S052-50091 S052-50092 S052-50093 S052-50094 S052-50095 S052-50096 S052-50096 S052-50097 S052-50097 S052-50099 S052-50100 S052-50101 S052-50102 S052-50103 S052-50104 S052-50105 S052-50106 S052-50107 S052-50108 S052-50109 S052-50110 S052-50111 S052-50112 S052-50113 S052-50114 S052-50115 S052-50116 S052-50117 S052-50117 S052-50121 S052-50122 S052-50126 S052-50127 S052-50128 S052-50129 S052-50130 S052-50131 S052-50132 S052-50133 S052-50134 S052-50135 S052-50136

2 3 4 1 2 1 2 1 2 3 3 4 4 5 1 2 3 4 5 1 2 3 4 5 6 7 8 9 10 11 12 6 6 1 2 1 2 5 16 15 17 18 3 4 9 8

S053-00010

S054-00159 S054-00168 S054-00169

109 113 114

S053S054-

GROUP-NO.

5-18 5-18 5-18 5-21 5-21 5-22 5-22 5-23 5-23 5-23 5-53 5-23 5-53 5-23 5-24 5-24 5-24 5-24 5-24 5-25 5-25 5-25 5-25 5-25 5-25 5-25 5-25 5-25 5-25 5-25 5-25 5-23 5-53 5-54 5-54 5-53 5-53 5-53 5-52 5-52 5-52 5-52 5-52 5-52 5-52 5-52 5-05-3 5-12 5-12 5-12

PAGE 253

Purchased From T.M. Manuals

H36C PARTS CATALOGUE INDEX

PART-NO.

PAGE 254

S054-00170 S054-00170 S054-00170 S054-00170 S054-00170 S054-00171 S054-00171 S054-00171 S054-00171 S054-00171 S054-00174 S054-00174 S054-00174 S054-00175 S054-00175 S054-00175 S054-00176 S054-00176 S054-00176 S054-00177 S054-00177 S054-00177 S054-00178 S054-00178 S054-00178 S054-00184 S054-00184 S054-00189 S054-00189 S054-00189 S054-00189 S054-00191 S054-00191 S054-00191 S054-00191 S054-00214 S054-00214 S054-00214 S054-00214 S054-00215 S054-00215 S054-00215 S054-00215 S054-00224 S054-00224 S054-00225 S054-00226 S054-00227 S054-00228 S054-00229 S054-00230 S054-00230

KEY-NO.

122 122 115 115 115 123 123 116 116 116 126 126 119 127 127 120 129 129 122 130 130 123 131 131 117 124 117 105 105 105 105 107 107 107 107 134 134 128 120 135 135 129 121 133 133 119 127 120 101 102 103 103

GROUP-NO.

5-10 5-11 5-12 5-13 5-14 5-10 5-11 5-12 5-13 5-14 5-10 5-11 5-12 5-10 5-11 5-12 5-10 5-11 5-12 5-10 5-11 5-12 5-10 5-11 5-14 5-12 5-13 5-10 5-11 5-12 5-13 5-10 5-11 5-12 5-13 5-10 5-11 5-12 5-13 5-10 5-11 5-12 5-13 5-10 5-11 5-13 5-12 5-14 5-10 5-10 5-10 5-11

INDEX PART-NO.

S054-00230 S054-00231 S054-00231 S054-00231 S054-00232 S054-00232 S054-00232 S054-00232 S054-00233 S054-00233 S054-00233 S054-00234 S054-00234 S054-00235 S054-00235 S054-00236 S054-00236 S054-00237 S054-00237 S054-00238 S054-00238 S054-00239 S054-00239 S054-00240 S054-00240 S054-00240 S054-00241 S054-00241 S054-00241 S054-00242 S054-00242 S054-00242 S054-00243 S054-00243 S054-00243 S054-00244 S054-00245 S054-00246 S054-00247 S054-00248 S054-00249 S054-00250 S054-00251 S054-00252 S054-00253 S054-00254 S054-00255 S054-00256 S054-00257 S054-00258 S054-00259 S054-00260

KEY-NO.

103 104 104 104 106 106 106 106 109 109 109 111 111 112 112 113 113 114 114 115 115 117 117 118 118 111 119 119 112 120 120 113 121 121 114 124 125 101 102 124 125 101 102 103 104 111 112 117 118 101 102 101

GROUP-NO.

5-13 5-10 5-11 5-13 5-10 5-11 5-12 5-13 5-10 5-11 5-13 5-10 5-11 5-10 5-11 5-10 5-11 5-10 5-11 5-10 5-11 5-10 5-11 5-10 5-11 5-13 5-10 5-11 5-13 5-10 5-11 5-13 5-10 5-11 5-13 5-10 5-10 5-11 5-11 5-11 5-11 5-12 5-12 5-12 5-12 5-12 5-12 5-12 5-12 5-13 5-13 5-14

PART-NO.

Please DO NOT Make Copies Of This Manual

S054-00261 S054-00262 S054-00263 S054-00264 S054-00265 S054-00266 S054-00267 S054-00268 S054-00269 S054-00270 S054-00271 S054-00272 S054-00273 S054-00420 S054-00438 S054-00439 S054-00440 S054-00441 S054-00442 S054-00453 S054-00454 S054-00455 S054-00456 S054-00457 S054-00458 S054-00459 S054-00460 S054-00461 S054-00462 S054-00463 S054-00464 S054-00465 S054-00466 S054-00467 S054-00468 S054-00469 S054-00470 S054-00471 S054-00472 S054-00473 S054-00473 S054-00474 S054-00475 S054-00476 S054-00477 S054-00478 S054-00487 S054-00488 S054-00489 S054-00683 S054-00684 S054-00685

KEY-NO.

102 103 104 105 106 107 109 111 112 113 114 121 122 1010 101 102 108 112 101 101 102 103 104 105 106 107 108 109 110 111 112 113 120, 201 121 123 230 232 233 244 245 250 246 247 248 249 252 255 256 253 101 102 103

GROUP-NO.

5-14 5-14 5-14 5-14 5-14 5-14 5-14 5-14 5-14 5-14 5-14 5-14 5-14 5-07 5-01 5-01 5-01 5-01 5-04 5-05-1 5-05-1 5-05-1 5-05-1 5-05-1 5-05-1 5-05-1 5-05-1 5-05-1 5-05-1 5-05-1 5-05-1 5-05-1 5-05-1 5-05-1 5-05-1 5-05-2 5-05-2 5-05-2 5-05-2 5-05-2 5-05-2 5-05-2 5-05-2 5-05-2 5-05-2 5-05-2 5-05-2 5-05-2 5-05-2 5-02 5-02 5-02

PART-NO.

KEY-NO.

S054-00688 S054-00689 S054-00690 S054-00693 S054-00694 S054-00695 S054-00696 S054-00697 S054-00698 S054-00699 S054-00700 S054-00701 S054-00702 S054-00703 S054-00704 S054-00705 S054-00706 S054-00707 S054-00708 S054-00709 S054-00710 S054-00711 S054-00712 S054-00713 S054-00714

104 105 106 107 108 109 110 111 112 113 114 116 120 115 117 118 119 121 122 123 124 125 126 127 128

S062-00015 S062-00021 S062-00024 S062-00025 S062-00027 S062-00031 S062-00032 S062-00033 S062-00034 S062-00035 S062-00038 S062-00039 S062-00040 S062-00041 S062-00042 S062-00057 S062-00060 S062-00062 S062-00063 S062-00064 S062-00119 S062-00120 S062-00121 S062-00135 S062-00137 S062-00138

1 34 1 1 4 3 7 2 7 4 5 6 4 21 1 4 1 2 3 6 1 1 10 1 8 7

S062-

GROUP-NO.

5-02 5-02 5-02 5-02 5-02 5-02 5-02 5-02 5-02 5-02 5-02 5-02 5-02 5-02 5-02 5-02 5-02 5-02 5-02 5-02 5-02 5-02 5-02 5-02 5-02 6-13 6-04 5-07 6-12 6-12 6-01 6-13 6-01 6-01 6-01 6-06 6-06 6-05 6-04 5-05-3 6-03 6-03 6-11 6-11 6-11 6-01 6-53 6-53 6-02 6-02 6-02

PAGE 255

Purchased From T.M. Manuals

H36C PARTS CATALOGUE INDEX

PART-NO.

KEY-NO.

GROUP-NO.

S062-00139 S062-00140 S062-00141 S062-00142 S062-00143 S062-00144 S062-00145 S062-00146 S062-00147 S062-00148 S062-00149 S062-00150 S062-00153 S062-00157 S062-00158 S062-00274 S062-00430 S062-00431 S062-00432 S062-00433 S062-00434 S062-00435 S062-00436 S062-00437 S062-00438 S062-00439 S062-00440 S062-00441 S062-00442 S062-00443 S062-00444

701 702 703 704 705 706 707 708 709 710 711 712 13 713 714 13 18 1801 1802 1803 1804 1805 1806 1807 1808 1809 1810 1811 1812 1813 1814

6-02 6-02 6-02 6-02 6-02 6-02 6-02 6-02 6-02 6-02 6-02 6-02 6-02 6-02 6-02 6-01 6-02 6-02 6-02 6-02 6-02 6-02 6-02 6-02 6-02 6-02 6-02 6-02 6-02 6-02 6-02

S063-00009 S063-00011 S063-00012 S063-00075

10 7 4 4

6-01 6-12 6-13 6-02

S071-00001

7-03

S072-00002 S072-00003 S072-00004 S072-00005 S072-00006 S072-00007 S072-00030 S072-00031 S072-00032 S072-00048 S072-00050 S072-00070

101 102 103 104 105 106 107 108 109 5 3 19

7-03 7-03 7-03 7-03 7-03 7-03 7-03 7-03 7-03 7-50 7-50 7-04

S063-

S071S072-

PAGE 256

INDEX PART-NO.

S073-

KEY-NO.

GROUP-NO.

S073-00031 S073-00060

4 1

7-50 7-01

S083-00070 S083-00074 S083-00078 S083-00080 S083-00095 S083-00095

1701 1703 14 30 26 16

6-05 6-05 1-05 6-04 6-04 6-05

S092-00024 S092-00025 S092-00026 S092-00027 S092-00028 S092-00029 S092-00098 S092-00099 S092-00141 S092-00155 S092-00173 S092-00174 S092-00175 S092-00176 S092-00177 S092-00178 S092-00179 S092-00180 S092-00181 S092-00182 S092-00183 S092-00183 S092-00183 S092-00184 S092-00185 S092-00186 S092-00187 S092-00188 S092-00189 S092-00190 S092-00191 S092-00192 S092-00193 S092-00194 S092-00195 S092-00196 S092-00197 S092-00198 S092-00199 S092-00200 S092-00201

5 19 23 37 39 40 28 25 34 2 101 103 106 108 109 111 113 116 117 118 119 5003 5114 120 121 123 124 125 127 129 132 133 134 135 136 137 138 140 141 142 143

6-51 6-51 6-51 6-51 6-51 6-51 6-51 6-51 6-51 5-51 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50

S083-

S092-

PART-NO.

Please DO NOT Make Copies Of This Manual

S092-00204 S092-00205 S092-00205 S092-00205 S092-00206 S092-00207 S092-00208 S092-00209 S092-00210 S092-00210 S092-00210 S092-00211 S092-00212 S092-00213 S092-00214 S092-00215 S092-00216 S092-00217 S092-00218 S092-00220 S092-00221 S092-00223 S092-00224 S092-00228 S092-00228 S092-00232 S092-00232 S092-00233 S092-00233 S092-00235 S092-00236 S092-00237 S092-00241 S092-00242 S092-00243 S092-00244 S092-00245 S092-00246 S092-00247 S092-00248 S092-00249 S092-00250 S092-00251 S092-00252 S092-00252 S092-00253 S092-00254 S092-00256 S092-00257 S092-00258 S092-00259 S092-00260

KEY-NO.

149 150 6 6 151 152 153 154 155 7 7 158 157 159 160 161 163 164 165 167 169 171 172 8 8 1 1 3 3 5001 5002 5004 5009 5010 5011 5012 5013 5014 5015 5016 5017 5018 5019 5020 5120 5021 5022 5034 5035 5024 5025 5026

GROUP-NO.

6-50 6-50 9-01 9-02 6-50 6-50 6-50 6-50 6-50 9-01 9-02 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 9-01 9-02 9-01 9-02 9-01 9-02 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50

PART-NO.

S092-00261 S092-00262 S092-00264 S092-00265 S092-00266 S092-00267 S092-00268 S092-00269 S092-00270 S092-00271 S092-00272 S092-00273 S092-00274 S092-00275 S092-00276 S092-00277 S092-00278 S092-00279 S092-00280 S092-00281 S092-00282 S092-00283 S092-00284 S092-00285 S092-00286 S092-00287 S092-00288 S092-00289 S092-00290 S092-00291 S092-00292 S092-00293 S092-00294 S092-00295 S092-00296 S092-00302 S092-00303 S092-00323 S092-00324 S092-00338 S092-00339 S092-00340 S092-00341 S092-00342 S092-00343 S092-00344 S092-00345 S092-00346 S092-00347 S092-00348 S092-00350 S092-00351

KEY-NO.

GROUP-NO.

5027 5028 5030 5031 5032 5036 5037 5038 5039 5040 5041 5042 5043 5044 5045 51 5101 5102 5103 5104 5105 5108 5109 5110 5112 5114 5115 5117 5118 5119 5046 1 3 4 8 4 4 1 1 145 148 166 170 174 175 173 50 5006 5007 5008 5023 5029

6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-51 6-51 6-51 6-51 9-02 9-01 6-52 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50 6-50

PAGE 257

Purchased From T.M. Manuals

H36C PARTS CATALOGUE INDEX

PART-NO.

KEY-NO.

GROUP-NO.

S092-00360

6-50

S093-00087 S093-00128

13 24

6-51 6-51

S10028 S10035

102 101

3-51 3-51

SB15-010001

3-02

SB18-060001

2-04

SP17-00005

4-01

SP19-00005 SP19-00011

3 1

6-50 4-02

SP22-00035 SP22-00036 SP22-00037 SP22-00038 SP22-00039 SP22-00040 SP22-00041 SP22-00049

2 1 114 115 116 117 2 38

5-06 5-06 5-05-1 5-05-1 5-05-1 5-05-1 5-05-1 5-05-3

SP31-00015

5-05-3

SP45-00001

6-05

SP49-00024 SP49-00036

15 24

6-05 1-05

SP62-00001 SP62-00001 SP62-00002 SP62-00003

6 8 7 9

1-04 6-53 1-04 6-53

SP66-00006

6-54

SP67-00002 SP67-00010

1 18

7-50 7-04

SP71-00015

3-51

S093S100

SB15SB18SP17SP19SP22-

SP31SP45SP49SP62-

SP66SP67SP71-

PAGE 258

PART-NO.

KEY-NO.

GROUP-NO.

Please DO NOT Make Copies Of This Manual

PAGE 259

Purchased From T.M. Manuals

Japanese Craftsmanship

Please DO NOT Make Copies Of This Manual