A2 MODEL 40, 4000 AND 4000S WINCHES
INTRODUCTION AND CUSTOMER INFORMATION TP27254
-UN-01JAN94
OVERALL VIEW OF JOHN DEERE MODEL 4000 (40 OEM) WINCH (MANUFACTURED 1989)
TO THE CUSTOMER THE PART NUMBERS IN THIS PARTS CATALOG WERE CORRECT AT THE TIME THIS CATALOG WAS PUBLISHED. IT IS OUR POLICY TO CONSTANTLY IMPROVE OUR MACHINES AND, THEREFORE, PART NUMBERS MAY CHANGE. WHEN ORDERING PARTS, VERIFY PART NUMBERS THROUGH YOUR DEALER.
(SPECIFICATIONS AND DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.)
MODEL 40, 4000 AND 4000S WINCHES PC2295
(12-OCT-00) COPYRIGHT © 2006 DEERE & COMPANY Moline, Illinois All rights reserved
I-1
PN=1
A3 MODEL 40, 4000 AND 4000S WINCHES
SERIAL NUMBER LOCATION EACH MODEL 4000 (MODEL 40 OEM) WINCH HAS ONE SERIAL NUMBER PLATE. THE WINCH SERIAL NUMBER PLATE IS LOCATED ON THE RIGHT-HAND SIDE OF THE WINCH. WHENEVER SERIAL NUMBERS ARE REQUIRED ON WARRANTY CLAIMS OR CORRESPONDENCE PERTAINING TO THIS PRODUCT, IT IS EXTREMELY IMPORTANT THAT ALL CHARACTERS BE FURNISHED. THIS POINT CANNOT BE OVEREMPHASIZED.
I-2
MODEL 40, 4000 AND 4000S WINCHES PC2295
(12-OCT-00) PN=2
A4 MODEL 40, 4000 AND 4000S WINCHES
MODEL 4000 WINCH SERIAL NUMBER PLATE TP27253
-UN-01JAN94
1. DESIGNATES WINCH MANUFACTURER 2. DESIGNATES COMPONENT IDENTIFICATION 3. DESIGNATES INPUT DIRECTION ROTATION
TO JOHN DEERE DUBUQUE WORKS WM CLOCKWISE COUNTER CLOCKWISE 4. DESIGNATES FRONT COVER TYPE DRIVE DIRECT DRIVE SINGLE REDUCTION DOUBLE REDUCTION 5. DESIGNATES BEVEL GEAR LOCATION ON THE DRIVE BRAKE SIDE SHAFT GEAR SIDE BOTH SIDES 6. DESIGNATES DRUM ROTATION OVER WIND UNDER WIND REVERSIBLE 7. WINCH SERIAL NUMBER ^123456
MODEL 40, 4000 AND 4000S WINCHES PC2295
(06-OCT-95)
I-3
PN=3
A5 MODEL 40, 4000 AND 4000S WINCHES
SERIAL NUMBER LISTING INFORMATION SERIAL NUMBER INFORMATION IS LISTED TO SHOW ON WHICH MACHINES EACH PART CAN BE USED; FOR EXAMPLE: THE PART CAN BE USED ON ALL MACHINES. 000000THE PART CAN BE USED ON ALL MACHINES BEGINNING WITH THE SERIAL NUMBER LISTED. -000000 THE PART CAN BE USED ON ALL MACHINES UP TO AND INCLUDING THE SERIAL NUMBER LISTED. 000000-000000 THE PART CAN BE USED ON ALL MACHINES BETWEEN AND INCLUDING THE SERIAL NUMBERS LISTED. WHEN XXXXXX’S ARE LISTED IN PLACE OF A SERIAL NUMBER, A SERIAL NUMBER CHANGE WAS MADE BUT THE EXACT SERIAL NUMBER WAS NOT AVAILABLE WHEN THE CATALOG WAS PRODUCED.
DIRECTION ARROW ARROWS ARE USED WITH ILLUSTRATIONS TO INDICATE THE FRONT OF THE UNIT. "RIGHT-HAND" AND "LEFTHAND" SIDES OF LOADER OR TRACTOR PARTS ARE DETERMINED BY FACING IN THE DIRECTION OF MACHINE FORWARD TRAVEL. EXCEPTION: FOR ALL BACKHOE PARTS, RIGHT-HAND AND LEFT-HAND SIDES, "FRONT" AND "REAR" ARE DETERMINED WHEN SEATED FOR BACKHOE OPERATION.
BOX-ENCLOSED ILLUSTRATIONS A KEY NUMBER, SHOWN IN THE PARTS LIST, IS ASSIGNED TO A BOX ENCLOSING ALL PARTS SOLD AS A SERVICE ASSEMBLY.
COMPLETE GOODS LISTINGS COMPLETE GOODS ARE LISTED IN BOLD FACE TYPE. ORDER SEPARATELY. DO NOT INCLUDE ON REPLACEMENT PARTS ORDER.
SI UNITS OF MEASURE METRIC DIMENSIONS ARE GIVEN, WHERE APPLICABLE, THROUGHOUT THIS PARTS CATALOG.
CHANGE INDICATOR LINE (MICROFICHE CATALOGS ONLY) CHANGES AFFECTING THE ORDERING OF PARTS ARE IDENTIFIED BY VERTICAL LINES MARKED IN THE LEFTHAND MARGIN OF REVISED PARTS LISTING IMAGES. A LINE IS ALSO AT THE LEFT-HAND EDGE OF THE SAME PART NUMBER IN THE NUMERICAL INDEX TO SHOW THE LOCATION OF REVISED INFORMATION.
I-4
MODEL 40, 4000 AND 4000S WINCHES PC2295
(12-OCT-00) PN=4
A6 MODEL 40, 4000 AND 4000S WINCHES ALPHABETICAL INDEX GRID
PAGE
A E17 B17
ACCUMALATOR WITH WINCH HYDRAULIC PRESSURE SWITCH .................................................. 3063 - 4 ADAPTER, WINCH FILTER.............................................. 3041 - 14
GRID A23 A21 A23 A17
B B1 D9 D11 C3 C5 C7 C19 C23 A23 B1 B3 A23 B1 B19 B23 B19 A15 A17 A19 A21 B23 B7 D5 D7 B17
BEARINGS MODEL 4000S WINCH GEARS, SHAFTS .. 3051 - 2 BEARINGS MODEL 4000S WINCH GEARS, SHAFTS .. 3051 - 4 BEARINGS, DRIVEN SHAFT AND GEAR ...................... 3050 - 2 BEARINGS, DRIVEN SHAFT AND GEAR ...................... 3050 - 4 BEARINGS, DRIVEN SHAFT AND GEAR ...................... 3050 - 6 BEARINGS, FREESPOOL PISTON ................................ 3050 - 14 BEARINGS, REDUCTION GEAR AND SHAFT .............. 3050 - 18 BELLCRANK, CONTROL VALVE LOWER LINKAGE (450H AND 700H CRAWLERS) .................................. 3015 - 10 BELLCRANK, LOWER CONTROL VALVE LINKAGE (550H, 650H, AND J-SERIES CRAWLER) ................ 3015 - 12 BOOT, SHIFT QUADRANT (CAB UNITS WITH WINCH) ........................................................................ 3015 - 14 BRACKET, CONTROL VALVE LOWER LINKAGE (450H AND 700H CRAWLERS) .................................. 3015 - 10 BRACKET, LOWER CONTROL VALVE LINKAGE (550H, 650H, AND J-SERIES CRAWLER) ................ 3015 - 12 BRACKET, MOUNTING MODEL 4000S .......................... 3042 - 2 BRACKET, MOUNTING MODEL 4000S (700H).............. 3042 - 6 BRACKET, RIGHT AND LEFT HAND MOUNTING MODEL 4000S.............................................................. 3042 - 2 BRACKET, SKIDDER WINCH CONTROL ...................... 3015 - 2 BRACKET, STANDARD CRAWLER WINCH CABLE...... 3015 - 4 BRACKET, WINCH CABLE FOR CRAWLER, POWER IN/POWER OUT .......................................................... 3015 - 6 BRACKET, WINCH CABLE, CONTROL VALVE (G-SERIES CRAWLER)................................................ 3015 - 8 BRACKET, WINCH MOUNTING MODEL 4000S (700H).................................................. 3042 - 6 BRACKETS, MOUNTING.................................................. 3041 - 4 BRAKE ASSEMBLY .......................................................... 3050 - 24 BRAKE ASSEMBLY .......................................................... 3050 - 26 BYPASS VALVE, WINCH HYDRAULIC FILTER ............ 3041 - 14
C A17 A21 A19 A15 C9 C11 C13 C15 C17 D1 D3 A15 A15 E1 E3 E5 E7
CABLE, PUSH-PULL, STANDARD CRAWLER WINCH CONTROLS .................................................... 3015 - 4 CABLE, PUSH-PULL, WINCH CONTROLS (G-SERIES CRAWLER)................................................ 3015 - 8 CABLE, PUSH-PULL, WINCH CONTROLS FOR CRAWLER, POWER IN/POWER OUT .............. 3015 - 6 CABLE, WINCH CONTROL, SKIDDER .......................... 3015 - 2 CLUTCH COVER .............................................................. 3050 - 8 CLUTCH COVER .............................................................. 3050 - 9A CLUTCH COVER .............................................................. 3050 - 9C CLUTCH COVER AND INPUT SHAFT............................ 3050 - 10 CLUTCH COVER AND INPUT SHAFT............................ 3050 - 12 CLUTCH PISTON.............................................................. 3050 - 20 CLUTCH PISTON.............................................................. 3050 - 22 CONTROL CABLE, SKIDDER WINCH ............................ 3015 - 2 CONTROL LEVER, SKIDDER WINCH ............................ 3015 - 2 CONTROL VALVE ............................................................ 3060 - 10 CONTROL VALVE ............................................................ 3060 - 12 CONTROL VALVE ............................................................ 3060 - 13A CONTROL VALVE ............................................................ 3060 - 13C
A19 A23 A23 A23 A23 B21 B23 C11 C15 C17 C9 C13 B5 B15 B17 B15 A17 A19
D E19 E19 B13 D9 D11 D9 D11 B23 B19 C21 C21 C3 C5 C7 D1 D3 B5
(08-MAR-06)
DIPSTICK TUBE, WINCH EXTERNAL RESERVOIR...... 3064 - 2 DIPSTICK, WINCH EXTERNAL RESERVOIR ................ 3064 - 2 DRAIN PORT RETURN HOSE ........................................ 3041 - 10 DRIVE GEAR MODEL 4000S .......................................... 3051 - 2 DRIVE GEAR MODEL 4000S .......................................... 3051 - 4 DRIVE GEAR MODEL 4000S, INPUT ............................ 3051 - 2 DRIVE GEAR MODLE 4000S, INPUT ............................ 3051 - 4 DRIVE SHAFT MODEL 4000S (700H) ............................ 3042 - 6 DRIVE SHAFT MODEL 4000S WINCH .......................... 3042 - 2 DRIVE SHAFT, FINAL AND FINAL DRIVE GEAR.......... 3050 - 16 DRIVE, FINAL GEAR AND FINAL DRIVE SHAFT.......... 3050 - 16 DRIVEN SHAFT, GEAR AND BEARINGS ...................... 3050 - 2 DRIVEN SHAFT, GEAR AND BEARINGS ...................... 3050 - 4 DRIVEN SHAFT, GEAR AND BEARINGS ...................... 3050 - 6 DRUM, CLUTCH .............................................................. 3050 - 20 DRUM, CLUTCH .............................................................. 3050 - 22 DRUM, HOUSING AND COVER...................................... 3041 - 2
E A21 A23 B1 E9
MODEL 40, 4000 AND 4000S WINCHES PC2295
PAGE CONTROL VALVE LINKAGE (450H AND 700H CRAWLERS) .................................. 3015 - 10 CONTROL VALVE LINKAGE ENTIRE ASSEMBLY (G-SERIES CRAWLER)................................................ 3015 - 8 CONTROL VALVE LINKAGE ENTIRE ASSEMBLY (700H AND 450H CRAWLERS) .................................. 3015 - 10 CONTROL VALVE LINKAGE, CRAWLER, STANDARD WINCH .......................................................................... 3015 - 4 CONTROL VALVE LINKAGE, LOWER (550H, 650H, AND J-SERIES CRAWLER) ................ 3015 - 12 CONTROL VALVE LINKAGE, POWER IN/POWER OUT WINCH FOR CRAWLER .................................... 3015 - 6 CONTROL VALVE, 450H AND 700H CRAWLER LOWER LINKAGE ........................................................ 3015 - 10 CONTROL VALVE, 450H AND 700H CRAWLERS LINKAGE ...................................................................... 3015 - 10 CONTROL VALVE, 700H AND 450H CRAWLER LOWER LINKAGE ........................................................ 3015 - 10 CONTROL VALVE, 700H AND 450H CRAWLERS LINKAGE ...................................................................... 3015 - 10 COVER ON 4000S WINCH ON 550H AND 650H, VALVE .......................................................................... 3042 - 4 COVER 4000S (700H) WINCH VALVE .......................... 3042 - 6 COVER, CLUTCH ............................................................ 3050 - 9A COVER, CLUTCH ............................................................ 3050 - 10 COVER, CLUTCH ............................................................ 3050 - 12 COVER, CLUTCH AND INPUT SHAFT .......................... 3050 - 8 COVER, CLUTCH AND INPUT SHAFT .......................... 3050 - 9C COVER, HOUSING AND DRUM...................................... 3041 - 2 COVER, VALVE ................................................................ 3041 - 12 COVER, WINCH GEAR HOUSING.................................. 3041 - 14 COVER, WINCH VALVE .................................................. 3041 - 12 CRAWLER STANDARD WINCH CONTROL LINKAGE .. 3015 - 4 CRAWLER UPPER LINKAGE FOR POWER IN/POWER OUT WINCH ................................................................ 3015 - 6
ENTIRE ASSEMBLY, CONTROL VALVE LINKAGE (G-SERIES CRAWLER)................................................ 3015 - 8 ENTIRE ASSEMBLY, CONTROL VALVE LINKAGE (700H AND 450H CRAWLERS) .................................. 3015 - 10 ENTIRE ASSEMBLY, CONTROL VALVE LINKAGE J-SERIES, 650H AND 550H CRAWLER .................... 3015 - 12 EXTERNAL LINES HYDRAULIC WINCH ........................ 3060 - 18
I-5
PN=5
A7 MODEL 40, 4000 AND 4000S WINCHES ALPHABETICAL INDEX - CONTINUED GRID PAGE E13 EXTERNAL LINES HYDRAULIC WINCH POWER IN/ POWER OUT................................................................ 3060 - 19C E11 EXTERNAL LINES HYDRAULIC WINCH WITH ACCUMALATOR .......................................................... 3060 - 19A E19 EXTERNAL RESERVOIR, WINCH .................................. 3064 - 2
GRID D9 D11 D9 D11 E9 E13
F
E11
FAIRLEAD ........................................................................ 3045 - 2 FAIRLEAD AND ROLLERS .............................................. 3045 - 2 FILTER ADAPTER, WINCH.............................................. 3041 - 14 FILTER, WINCH HYDRAULIC.......................................... 3041 - 14 FINAL DRIVE GEAR AND FINAL DRIVE SHAFT .......... 3050 - 16 FINAL DRIVE SHAFT AND FINAL DRIVE GEAR .......... 3050 - 16 FITTINGS, SHIFT PISTON PORT.................................... 3060 - 5A FREESPOOL PISTON AND BEARINGS ........................ 3050 - 14
E15 E17
C1 C1 B17 B17 C21 C21 D17 C19
G A21 B9 B17 B17 D9 D11 D11 C3 C7 C5 D11 C3 C5 C7 C21 D9 D9 D9 C23 C17 C17 D9 D11 B19 B23
G-SERIES CRAWLER, CONTROL VALVE LINKAGE .... 3015 - 8 GASKET, MOUNTING QUILL .......................................... 3041 - 6 GASKET, WINCH GEAR HOUSING ................................ 3041 - 14 GEAR HOUSING GASKET, WINCH ................................ 3041 - 14 GEAR MODEL 4000S, DRIVE ........................................ 3051 - 2 GEAR MODEL 4000S, INPUT DRIVE ............................ 3051 - 4 GEAR PUMP MODEL 4000S .......................................... 3051 - 4 GEAR, BEVEL .................................................................. 3050 - 2 GEAR, BEVEL GEAR SHAFT .......................................... 3050 - 6 GEAR, DRIVE .................................................................. 3050 - 4 GEAR, DRIVE MODEL 4000S ........................................ 3051 - 4 GEAR, DRIVEN SHAFT AND BEARINGS ...................... 3050 - 2 GEAR, DRIVEN SHAFT AND BEARINGS ...................... 3050 - 4 GEAR, DRIVEN SHAFT AND BEARINGS ...................... 3050 - 6 GEAR, FINAL DRIVE AND FINAL DRIVE SHAFT.......... 3050 - 16 GEAR, INPUT DRIVE MODEL 4000S ............................ 3051 - 2 GEAR, INPUT LOW SPEED MODEL 4000S .................. 3051 - 2 GEAR, PUMP MODEL 4000S .......................................... 3051 - 2 GEAR, REDUCTION, SHAFT AND BEARINGS.............. 3050 - 18 GEARS, INPUT ................................................................ 3050 - 12 GEARS, LOW SPEED ...................................................... 3050 - 12 GEARS, SHAFTS AND BEARINGS MODEL 4000S WINCH .......................................................................... 3051 - 2 GEARS, SHAFTS AND BEARINGS MODEL 4000S WINCH .......................................................................... 3051 - 4 GUARD, MODEL 4000S WINCH .................................... 3042 - 2 GUARD, MODEL 4000S WINCH (700H) ........................ 3042 - 6
PAGE HYDRAULIC PUMP MODEL 4000S ................................ 3051 - 2 HYDRAULIC PUMP MODEL 4000S ................................ 3051 - 4 HYDRAULIC PUMP MODEL 4000S KIT ........................ 3051 - 2 HYDRAULIC PUMP MODEL 4000S KIT ........................ 3051 - 4 HYDRAULIC WINCH EXTERNAL LINES ........................ 3060 - 18 HYDRAULIC WINCH EXTERNAL LINES POWER IN/ POWER OUT................................................................ 3060 - 19C HYDRAULIC WINCH EXTERNAL LINES WITH ACCUMALATOR .......................................................... 3060 - 19A HYDRAULIC WINCH LINES ............................................ 3063 - 2 HYDRAULIC WINCH LINES WITH ACCUMALATOR .... 3063 - 4
I D9 D11 D9 C11 C9 C13 C15 C17 D9 D11 B9 D13 D15
INPUT DRIVE GEAR MODEL 4000S .............................. 3051 - 2 INPUT DRIVE GEAR MODEL 4000S .............................. 3051 - 4 INPUT LOW SPEED GEAR MODEL 4000S .................. 3051 - 2 INPUT SHAFT .................................................................. 3050 - 9A INPUT SHAFT AND CLUTCH COVER............................ 3050 - 8 INPUT SHAFT AND CLUTCH COVER............................ 3050 - 9C INPUT SHAFT AND CLUTCH COVER............................ 3050 - 10 INPUT SHAFT AND CLUTCH COVER............................ 3050 - 12 INPUT SHAFT MODEL 4000S ........................................ 3051 - 2 INPUT SHAFT MODEL 4000S ........................................ 3051 - 4 INPUT SHAFT MOUNTING QUILL .................................. 3041 - 6 INTERNAL LINES ............................................................ 3060 - 2 INTERNAL LINES ............................................................ 3060 - 4
J B1 B1 B1 B1
J-SERIES, 550H, AND 650H CRAWLER LOWER CONTROL VALVE LINKAGE ...................................... 3015 - 12 J-SERIES, 550H, 650H CRAWLER COMPLETE CONTROL VALVE LINKAGE ...................................... 3015 - 12 J-SERIES, 650H AND 550H CRAWLER COMPLETE CONTROL VALVE LINKAGE ...................................... 3015 - 12 J-SERIES, 650H, 550H CRAWLER COMPLETE CONTROL VALVE LINKAGE ...................................... 3015 - 12
K D9 D11
KIT, HYDRAULIC PUMP MODEL 4000S ........................ 3051 - 2 KIT, HYDRAULIC PUMP MODEL 4000S ........................ 3051 - 4
L H E11 E13 B13 B17 E1 E3 E5 E7 B17 B5 B17 D5 D7 B17 D17
I-6
HARNESS, WINCH SWITCH .......................................... 3060 - 19A HARNESS, WINCH SWITCH .......................................... 3060 - 19C HOSE, HYDRAULIC, DRAIN PORT ................................ 3041 - 10 HOUSING PRESSURE REGULATING VALVE, WINCH 3041 - 14 HOUSING, CONTROL VALVE ........................................ 3060 - 10 HOUSING, CONTROL VALVE ........................................ 3060 - 12 HOUSING, CONTROL VALVE ........................................ 3060 - 13A HOUSING, CONTROL VALVE ........................................ 3060 - 13C HOUSING, COVER AND WINCH GEAR ........................ 3041 - 14 HOUSING, DRUM AND COVER...................................... 3041 - 2 HOUSING, GASKET WINCH GEAR ................................ 3041 - 14 HUB, BRAKE .................................................................... 3050 - 24 HUB, BRAKE .................................................................... 3050 - 26 HYDRAULIC FILTER WINCH .......................................... 3041 - 14 HYDRAULIC FITTING, SUPPLY PORT .......................... 3060 - 5A
A15 A21 A17 A15 A17 A21 A19 D15 D15 D15 E15 E9
LABEL, SKIDDER WINCH CONTROL ............................ 3015 - 2 LABEL, WINCH CONTROL (G-SERIES CRAWLER)................................................ 3015 - 8 LEVER, CRAWLER WINCH CONTROL VALVE LINKAGE ...................................................................... 3015 - 4 LEVER, SKIDDER WINCH CONTROL ............................ 3015 - 2 LEVER, STANDARD CRAWLER WINCH CONTROL VALVE .......................................................................... 3015 - 4 LEVER, WINCH CONTROL VALVE (G-SERIES CRAWLER)................................................ 3015 - 8 LEVER, WINCH CONTROL VALVE FOR CRAWLER, POWER IN/POWER OUT ............................................ 3015 - 6 LINE, SHIFT FORWARD .................................................. 3060 - 4 LINE, SHIFT RETURN...................................................... 3060 - 4 LINE, SHIFT REVERSE.................................................... 3060 - 4 LINES, HYDRAULIC WINCH............................................ 3063 - 2 LINES, HYDRAULIC WINCH EXTERNAL ...................... 3060 - 18 MODEL 40, 4000 AND 4000S WINCHES PC2295
(08-MAR-06) PN=6
A8 MODEL 40, 4000 AND 4000S WINCHES ALPHABETICAL INDEX - CONTINUED GRID PAGE E13 LINES, HYDRAULIC WINCH EXTERNAL POWER IN /POWER OUT .............................................................. 3060 - 19C E11 LINES, HYDRAULIC WINCH EXTERNAL WITH ACCUMALATOR .......................................................... 3060 - 19A E17 LINES, HYDRAULIC WINCH WITH ACCUMALATOR .... 3063 - 4 D13 LINES, INTERNAL ............................................................ 3060 - 2 D15 LINES, INTERNAL ............................................................ 3060 - 4 A23 LINKAGE ENTIRE ASSEMBLY, CONTROL VALVE (700H AND 450H CRAWLERS) .................................. 3015 - 10 A23 LINKAGE, CONTROL VALVE (450H AND 700H CRAWLERS) .................................. 3015 - 10 B1 LINKAGE, CONTROL VALVE, LOWER (550H, 650H, AND J-SERIES CRAWLER) ................ 3015 - 12 A17 LINKAGE, STANDARD CRAWLER WINCH CONTROL VALVE .......................................................................... 3015 - 4 A21 LINKAGE, WINCH CONTROL VALVE (G-SERIES CRAWLER)................................................ 3015 - 8 A19 LINKAGE, WINCH CONTROL VALVE FOR CRAWLER POWER IN/POWER OUT ............................................ 3015 - 6 D9 LOW SPEED INPUT GEAR MODEL 4000S .................. 3051 - 2 A23 LOWER CONTROL VALVE LINKAGE (450H AND 700H CRAWLERS) .................................. 3015 - 10
M D1 D3 B19 B23 A17 B19 B23 B7 B9
E9 E13 E11 B17 E15 E17 D9 D11 D9
MANIFOLD, CLUTCH OIL ................................................ 3050 - 20 MANIFOLD, CLUTCH OIL ................................................ 3050 - 22 MOUNTING BRACKET MODEL 4000S .......................... 3042 - 2 MOUNTING BRACKET MODEL 4000S (700H) .............. 3042 - 6 MOUNTING BRACKET, CRAWLER WINCH CONTROL VALVE LINKAGE ...................................... 3015 - 4 MOUNTING BRACKET, RIGHT AND LEFT HAND MODEL 4000S .............................................................. 3042 - 2 MOUNTING BRACKET, WINCH MODEL 4000S (700H).................................................. 3042 - 6 MOUNTING BRACKETS .................................................. 3041 - 4 MOUNTING QUILL............................................................ 3041 - 6
PINION, FINAL REDUCTION .......................................... 3050 - 18 PISTON, BRAKE .............................................................. 3050 - 24 PISTON, BRAKE .............................................................. 3050 - 26 PISTON, CLUTCH ............................................................ 3050 - 20 PISTON, CLUTCH ............................................................ 3050 - 22 PISTON, FREESPOOL AND BEARINGS ........................ 3050 - 14 PLATE, CLUTCH .............................................................. 3050 - 20 PLATE, CLUTCH .............................................................. 3050 - 22 PLUGS FOR POWER IN/POWER OUT PORTS ............ 3060 - 6 PLUGS FOR POWER IN/POWER OUT PORTS ............ 3060 - 7A PLUGS, OIL PASSAGE .................................................... 3060 - 8 POWER IN, CRAWLER WINCH CONTROL VALVE LINKAGE ...................................................................... 3015 - 4 POWER-IN/POWER-OUT VALVE .................................... 3060 - 18 POWER-IN/POWER-OUT VALVE .................................... 3060 - 19C POWER-IN/POWER-OUT VALVE WITH ACCUMALATOR .......................................................... 3060 - 19A PRESSURE REGULATING VALVE (WINCH HOUSING)...................................................... 3041 - 14 PRESSURE SWITCH, HYDRAULIC WINCH .................. 3063 - 2 PRESSURE SWITCH, HYDRAULIC WINCH WITH ACCUMALATOR .......................................................... 3063 - 4 PUMP GEAR MODEL 4000S .......................................... 3051 - 2 PUMP GEAR MODEL 4000S .......................................... 3051 - 4 PUMP MODEL 4000S KIT, HYDRAULIC ........................ 3051 - 2
MODEL 40, 4000 AND 4000S WINCHES PC2295
Q C3 C5 C7 C19 C21 B9
(08-MAR-06)
QUILL, BEVEL GEAR SHAFT.......................................... 3050 - 2 QUILL, BEVEL GEAR SHAFT.......................................... 3050 - 4 QUILL, BEVEL GEAR SHAFT.......................................... 3050 - 6 QUILL, DRUM .................................................................. 3050 - 14 QUILL, FINAL DRIVE........................................................ 3050 - 16 QUILL, MOUNTING .......................................................... 3041 - 6
R C23 B17 E19 B11 B19 C1
P C23 D5 D7 D1 D3 C19 D1 D3 D19 D21 D23 A17
GRID PAGE D11 PUMP MODEL 4000S KIT, HYDRAULIC ........................ 3051 - 4 D9 PUMP MODEL 4000S, HYDRAULIC .............................. 3051 - 2 D11 PUMP MODEL 4000S, HYDRAULIC .............................. 3051 - 4
REDUCTION GEAR, SHAFT AND BEARINGS .............. 3050 - 18 REGULATING VALVE, PRESSURE (WINCH HOUSING)...................................................... 3041 - 14 RESERVOIR, WINCH EXTERNAL .................................. 3064 - 2 RETURN TUBE ................................................................ 3041 - 8 RIGHT AND LEFT HAND MOUNTING BRACKET MODEL 4000S.............................................................. 3042 - 2 ROLLERS, FAIRLEAD ...................................................... 3045 - 2
S D9 C3 C7 B23 C1 C21 C9 C11 C13 C15 C17 D11 C5 C17 C23 B19 D9 D11 B21 B19 B23 B3 C7 A15 A15 A15 A15 A15 A17 A17 E11 E13 E15
SHAFT MODEL 4000S, INPUT ........................................ 3051 - 2 SHAFT, BEVEL GEAR...................................................... 3050 - 2 SHAFT, BEVEL GEAR...................................................... 3050 - 6 SHAFT, DRIVE MODEL 4000S (700H) .......................... 3042 - 6 SHAFT, FAIRLEAD ROLLER .......................................... 3045 - 2 SHAFT, FINAL DRIVE AND FINAL DRIVE GEAR.......... 3050 - 16 SHAFT, INPUT .................................................................. 3050 - 8 SHAFT, INPUT .................................................................. 3050 - 9A SHAFT, INPUT .................................................................. 3050 - 9C SHAFT, INPUT .................................................................. 3050 - 10 SHAFT, INPUT .................................................................. 3050 - 12 SHAFT, INPUT MODEL 4000S ........................................ 3051 - 4 SHAFT, LOW SPEED IDLER .......................................... 3050 - 4 SHAFT, LOW SPEED IDLER .......................................... 3050 - 12 SHAFT, REDUCTION GEAR AND BEARINGS .............. 3050 - 18 SHAFT, WINCH DRIVE MODEL 4000S .......................... 3042 - 2 SHAFTS AND BEARINGS MODEL 4000S WINCH GEARS.......................................................................... 3051 - 2 SHAFTS AND BEARINGS MODEL 4000S WINCH GEARS.......................................................................... 3051 - 4 SHIELD ON 4000S WINCH ON 550H AND 650H .......... 3042 - 4 SHIELD, MODEL 4000S U-JOINT REAR ........................ 3042 - 2 SHIELD, MODEL 4000S U-JOINT REAR (700H)............ 3042 - 6 SHIFT QUADRANT BOOT (CAB UNITS WITH WINCH) ........................................................................ 3015 - 14 SHIFTER, REVERSE ........................................................ 3050 - 6 SKIDDER WINCH CONTROL BRACKET ........................ 3015 - 2 SKIDDER WINCH CONTROL CABLE ............................ 3015 - 2 SKIDDER WINCH CONTROL LABEL.............................. 3015 - 2 SKIDDER WINCH CONTROL LEVER ............................ 3015 - 2 SKIDDER WINCH CONTROLS ........................................ 3015 - 2 STANDARD WINCH CONTROL LINKAGE CRAWLER .. 3015 - 4 STANDARD, CRAWLER WINCH CONTROL VALVE LINKAGE ...................................................................... 3015 - 4 SWITCH HARNESS, WINCH .......................................... 3060 - 19A SWITCH HARNESS, WINCH .......................................... 3060 - 19C SWITCH, WINCH HYDRAULIC PRESSURE .................. 3063 - 2
I-7
PN=7
A9 MODEL 40, 4000 AND 4000S WINCHES ALPHABETICAL INDEX - CONTINUED GRID PAGE E17 SWITCH, WINCH HYDRAULIC PRESSURE WITH ACCUMALATOR .......................................................... 3063 - 4
T B11 D13 D15 E19
TUBE, RETURN ................................................................ 3041 - 8 TUBE, STANDPIPE .......................................................... 3060 - 2 TUBE, STANDPIPE .......................................................... 3060 - 4 TUBE, WINCH EXTERNAL RESERVOIR DIPSTICK...... 3064 - 2
U B19 B23 C9 C13 D9 D11 B19 B23
U-JOINT REAR SHIELD MODEL 4000S ........................ 3042 - 2 U-JOINT REAR SHIELD MODEL 4000S (700H) ............ 3042 - 6 UNIVERSAL JOINT .......................................................... 3050 - 8 UNIVERSAL JOINT .......................................................... 3050 - 9C UNIVERSAL JOINT (YOKE) MODEL 4000S .................. 3051 - 2 UNIVERSAL JOINT (YOKE) MODEL 4000S .................. 3051 - 4 UNIVERSAL JOINT MODEL 4000S ................................ 3042 - 2 UNIVERSAL JOINT MODEL 4000S (700H) .................... 3042 - 6
V B15 B21 B23 A23 E1 E3 E5 E7 E9 E13 E11 A19 B17 E1 E3 E5 E7 B17
VALVE COVER ................................................................ 3041 - 12 VALVE COVER ON 4000S WINCH ON 550H AND 650H .................................................................... 3042 - 4 VALVE COVER 4000S (700H) WINCH .......................... 3042 - 6 VALVE LINKAGE, CONTROL, ENTIRE ASSEMBLY (700H AND 450H CRAWLERS) .................................. 3015 - 10 VALVE, CONTROL .......................................................... 3060 - 10 VALVE, CONTROL .......................................................... 3060 - 12 VALVE, CONTROL .......................................................... 3060 - 13A VALVE, CONTROL .......................................................... 3060 - 13C VALVE, POWER-IN/POWER-OUT .................................. 3060 - 18 VALVE, POWER-IN/POWER-OUT .................................. 3060 - 19C VALVE, POWER-IN/POWER-OUT WITH ACCUMALATOR .......................................................... 3060 - 19A VALVE, POWER-IN/POWER-OUT, CRAWLER .............. 3015 - 6 VALVE, PRESSURE REGULATING (WINCH HOUSING)...................................................... 3041 - 14 VALVE, SPOOL ................................................................ 3060 - 10 VALVE, SPOOL ................................................................ 3060 - 12 VALVE, SPOOL ................................................................ 3060 - 13A VALVE, SPOOL ................................................................ 3060 - 13C VALVE, WINCH HYDRAULIC FILTER BYPASS ............ 3041 - 14
GRID B23 E19 E19 E19 B17 B17 B17 D9 D11 B19 B23 B17 E9 E13 E11 B17 B17 E15 E17 E15 E17 A21 B23 B23 E11 E13 B23 A19 D23
PAGE WINCH DRIVE SHAFT MODEL 4000S (700H) .............. 3042 - 6 WINCH EXTERNAL RESERVOIR.................................... 3064 - 2 WINCH EXTERNAL RESERVOIR DIPSTICK.................. 3064 - 2 WINCH EXTERNAL RESERVOIR DIPSTICK TUBE ...... 3064 - 2 WINCH FILTER ADAPTER .............................................. 3041 - 14 WINCH GEAR HOUSING AND COVER.......................... 3041 - 14 WINCH GEAR HOUSING GASKET ................................ 3041 - 14 WINCH GEARS, SHAFTS AND BEARINGS MODEL 4000S ............................................................................ 3051 - 2 WINCH GEARS, SHAFTS AND BEARINGS MODEL 4000S ............................................................................ 3051 - 4 WINCH GUARD MODEL 4000S ...................................... 3042 - 2 WINCH GUARD MODEL 4000S (700H) .......................... 3042 - 6 WINCH HOUSING PRESSURE REGULATING VALVE.. 3041 - 14 WINCH HYDRAULIC EXTERNAL LINES ........................ 3060 - 18 WINCH HYDRAULIC EXTERNAL LINES POWER IN POWER OUT................................................................ 3060 - 19C WINCH HYDRAULIC EXTERNAL LINES WITH ACCUMALATOR .......................................................... 3060 - 19A WINCH HYDRAULIC FILTER .......................................... 3041 - 14 WINCH HYDRAULIC FILTER BYPASS VALVE .............. 3041 - 14 WINCH HYDRAULIC LINES ............................................ 3063 - 2 WINCH HYDRAULIC LINES WITH ACCUMALATOR .... 3063 - 4 WINCH HYDRAULIC PRESSURE SWITCH.................... 3063 - 2 WINCH HYDRAULIC PRESSURE SWITCH WITH ACCUMALATOR .......................................................... 3063 - 4 WINCH LEVER, CONTROL VALVE (G-SERIES CRAWLER)................................................ 3015 - 8 WINCH MOUNTING BRACKET MODEL 4000S (700H).................................................. 3042 - 6 WINCH SUMP GUARD COVER PLATE 4000S (700H ) .................................................................................... 3042 - 6 WINCH SWITCH HARNESS ............................................ 3060 - 19A WINCH SWITCH HARNESS ............................................ 3060 - 19C WINCH VALVE COVER 4000S (700H) .......................... 3042 - 6 WINCH, POWER IN/POWER OUT, CRAWLER .......................................................... 3015 - 6 WORK PORT PLUGS ...................................................... 3060 - 8
Y C9 C13 D9 D11 A17
YOKE ................................................................................ 3050 - 8 YOKE ................................................................................ 3050 - 9C YOKE) UNIVERSAL JOINT MODEL 4000S .................... 3051 - 2 YOKE) UNIVERSAL JOINT MODEL 4000S .................... 3051 - 4 YOKE, CRAWLER WINCH CONTROL VALVE LINKAGE ...................................................................... 3015 - 4
W B5 B5 A15 A21 A15 A15 A21 A19 A17 A21
I-8
WEDGE, CABLE .............................................................. 3041 - 2 WEDGE, DRUM ................................................................ 3041 - 2 WINCH CONTROL CABLE, SKIDDER ............................ 3015 - 2 WINCH CONTROL LABEL (G-SERIES CRAWLER)................................................ 3015 - 8 WINCH CONTROL LABEL, SKIDDER ............................ 3015 - 2 WINCH CONTROL LEVER, SKIDDER ............................ 3015 - 2 WINCH CONTROL VALVE LINKAGE (G-SERIES CRAWLER)................................................ 3015 - 8 WINCH CONTROL VALVE LINKAGE FOR CRAWLER, POWER IN/POWER OUT ............................................ 3015 - 6 WINCH CONTROL VALVE LINKAGE, STANDARD, CRAWLER .................................................................... 3015 - 4 WINCH CONTROLS PUSH-PULL CABLE (G-SERIES CRAWLER)................................................ 3015 - 8 MODEL 40, 4000 AND 4000S WINCHES PC2295
(08-MAR-06) PN=8
WINCH
30
CONTROLS LINKAGE 3015 MEMORANDA
MODEL 40, 4000 AND 4000S WINCHES PC2295
(27-SEP-01)
3015-1
PN=9
A15 WINCH
30
CONTROLS LINKAGE 3015 SKIDDER WINCH CONTROL LEVER AND CABLE (SMALL AND LARGE WINCHES) (WITH INTERNAL SUMP) (SKIDDER) TP35528
3015-2
-UN-13APR95
THIS PARTS LISTING IS CONTINUED MODEL 40, 4000 AND 4000S WINCHES PC2295
(09-JUN-04) PN=10
A16 WINCH
30
CONTROLS LINKAGE 3015 SKIDDER WINCH CONTROL LEVER AND CABLE (SMALL AND LARGE WINCHES) (WITH INTERNAL SUMP) (SKIDDER) KEY
PART NO.
PART NAME
1
H858R H858R L299T 11M7079 11H233 14H882 T118784 M93817 R53317 T133132 AT128907 AH138519 19M7407 19H2791 T101955 T132233 T137929 T30476 T68435 19M8008 24M7207 28H3436 21M7267 T134216 T68099 R60458 T134122 T141596 T131180 AT181161 AT179561
PIN FASTENER PIN FASTENER YOKE COTTER PIN COTTER PIN NUT BRACKET COMPRESSION SPRING LOCK NUT BRACKET PUSH PULL CABLE KIT CAP SCREW CAP SCREW BUMPER STRAP BELLCRANK BUSHING BOLT CAP SCREW WASHER SPACER SCREW LABEL KNOB KNOB INSERT U-BOLT STRAP LEVER LEVER
1 3 1 1 3 1 1 1 2 1 1 1 2 2 2 2 1 1 1 2 3 2 3 1 1 1 1 1 2 1 1
28 29 30 31 32 33
M68954 14H650 19M7784 24M7239 19H2987 Z40761
LOCK NUT NUT SCREW WASHER CAP SCREW PLUG
1 2 3 1 1 1
34 35 36 37 38 39 40 41 42
R38454 T21368 AT48548 AT167551 AT65619 24M7238 14M7194 21M7267 AH138519
GROMMET BUSHING BALL JOINT BRACKET BALL JOINT WASHER NUT SCREW KIT
1 2 1 1 1 1 2 2 2
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27
MODEL 40, 4000 AND 4000S WINCHES PC2295
QTY
(09-JUN-04)
SERIAL NO.
REMARKS
6000 WINCH (748G) 4000 WINCH (548G AND 648G) (548G, 648G AND 748G) 2.500 X 12 MM, 6000 WINCH (748G) 3/32" X 1/2", 4000 WINCH (548G AND 648G) 5/16", (548G, 648G AND 748G) (748G) (548G, 648G AND 748G) 7.925 MM (5/16") (548G, 648G AND 748G) (548G, 648G AND 748G) (548G, 648G AND 748G) (548G, 648G AND 748G) M8 X 25, (748G) 3/8" X 1-3/4", (748G) (548G, 648G AND 748G) (548G AND 648G) (548G AND 648G) (548G AND 648G) (548G AND 648G) M8 X 35, (548G AND 648G) 8.400 X 24 X 2 MM, (548G, 648G AND 748G) 0.493" X 0.675" X 7/8", (748G) M6 X 20, (548G, 648G AND 748G) (548G, 648G AND 748G) (USE WITH AT147864) (548G, 648G AND 748G) (USE WITH AT145062) (548G, 648G AND 748G) (548G, 648G AND 748G) (548G, 648G AND 748G) (USE WITH T68099) (SUB FOR AT147864) (548G, 648G AND 748G) (USE WITH R60458) (SUB FOR AT145062) (548G, 648G AND 748G) 5/16", (548G, 648G AND 748G) M10 X 20, (548G, 648G AND 748G) 10.700 X 21 X 2.500 MM, (548G, 648G AND 748G) 3/8" X 1", (548G, 648G AND 748G) (548G, 648G AND 748G) (NO WINCH) CAB FLOOR WINCH CABLE HOLE (548G, 648G AND 748G) (548G AND 648G) (548G, 648G AND 748G) (548G, 648G AND 748G) (548G, 648G AND 748G) 8.700 X 17 X 2 MM, (548G, 648G AND 748G) M6, (548G, 648G AND 748G) M6 X 20, (548G, 648G AND 748G) (548G, 648G AND 748G)
3015-3 PN=11
A17 WINCH
30
CONTROLS LINKAGE 3015 UPPER CONTROL VALVE LINKAGE FOR CRAWLER STANDARD WINCH T198928
3015-4
-UN-21APR04
THIS PARTS LISTING IS CONTINUED MODEL 40, 4000 AND 4000S WINCHES PC2295
(09-JUN-04) PN=12
A18 WINCH
30
CONTROLS LINKAGE 3015 UPPER CONTROL VALVE LINKAGE FOR CRAWLER STANDARD WINCH KEY
PART NO.
PART NAME
1 2 3 4 5 6 7 8 9 10 11
AP17808 T132831 T129792 AT139745 M68954 14H650 AT48548 AT112928 19M7513 AH138519 AT139771 AT221944 AT182299
KNOB LABEL INSERT CONTROL LEVER LOCK NUT NUT BALL JOINT BALL JOINT CAP SCREW KIT PUSH PULL CABLE PUSH PULL CABLE PUSH PULL CABLE
1 1 1 1 1 2 1 1 6 1 1 1 1
12 13 14 15 16 17 18 19
14M7273 L299T 19H2987 24M7239 14M7166 AT139746 24M7238 R76686
NUT YOKE CAP SCREW WASHER LOCK NUT BRACKET WASHER LOCK NUT
1 1 1 1 4 1 1 1
MODEL 40, 4000 AND 4000S WINCHES PC2295
QTY
(09-JUN-04)
SERIAL NO.
REMARKS
(WINCH CONTROLS)
5/16" M8 X 30 (MODEL 4000) (G-SERIES) (MODEL 4000S) (FOR 700H ONLY) (MODEL 4000S) (H-SERIES AND J-SERIES) (EXCEPT 700H) (CONNECTS TO LOWER LINKAGE)
3015-5 PN=13
A19 WINCH
30
CONTROLS LINKAGE 3015 UPPER CONTROL VALVE LINKAGE FOR CRAWLER PI/PO WINCH T199190
3015-6
-UN-21APR04
THIS PARTS LISTING IS CONTINUED MODEL 40, 4000 AND 4000S WINCHES PC2295
(09-JUN-04) PN=14
A20 WINCH
30
CONTROLS LINKAGE 3015 UPPER CONTROL VALVE LINKAGE FOR CRAWLER PI/PO WINCH KEY
PART NO.
PART NAME
1 2 3 4 5 6 7 8 9 10 11
AP17808 T132832 T129794 AT139745 M68954 14H650 AT48548 AT112928 19M7513 AH138519 AT139771 AT221944 AT182299
KNOB LABEL INSERT CONTROL LEVER LOCK NUT NUT BALL JOINT BALL JOINT CAP SCREW KIT PUSH PULL CABLE PUSH PULL CABLE PUSH PULL CABLE
1 1 1 1 1 2 1 1 2 2 1 1 1
12 13 14 15 16 17 18 19 20 21 22 23 24
14M7273 19M7513 19H2987 24M7239 14M7166 AT139746 24M7238 19M7662 T131460 AT46597 AT87429 R76686 L299T
NUT CAP SCREW CAP SCREW WASHER LOCK NUT BRACKET WASHER CAP SCREW SPACER BALL JOINT SPOOL VALVE LOCK NUT YOKE
2 4 1 1 4 1 4 3 1 1 1 2 1
MODEL 40, 4000 AND 4000S WINCHES PC2295
QTY
(09-JUN-04)
SERIAL NO.
REMARKS
(G-SERIES) (MODEL 4000) (700H CRAWLER ONLY) (MODEL 4000S) (H-SERIES AND J-SERIES) (EXCEPT 700H) (MODEL 4000S)
(POWER IN / POWER OUT) (CONNECTS TO LOWER LINKAGE)
3015-7 PN=15
A21 WINCH
30
CONTROLS LINKAGE 3015 LOWER CONTROL VALVE LINKAGE FOR CRAWLER G-SERIES T199193
3015-8
-UN-10MAY04
THIS PARTS LISTING IS CONTINUED MODEL 40, 4000 AND 4000S WINCHES PC2295
(09-JUN-04) PN=16
A22 WINCH
30
CONTROLS LINKAGE 3015 LOWER CONTROL VALVE LINKAGE FOR CRAWLER G-SERIES KEY
PART NO.
1
19M8877 T157641 24M7180 T131414 24M7239 19M7662 14M7275 T125808 24H1390 T25050 T38710 11M7082 P46404 AT139702 AH138519 14M7273 AT139761 19M7922 P46404 R64776 T133132 24H1122 AT139867
SCREW BUSHING WASHER BRACKET WASHER CAP SCREW NUT BUSHING SHIM WASHER ADJUSTING STRAP COTTER PIN PIN FASTENER BELLCRANK KIT NUT BRACKET CAP SCREW PIN FASTENER SPRING BRACKET WASHER LINKAGE
AT139866
LINKAGE
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
PART NAME
MODEL 40, 4000 AND 4000S WINCHES PC2295
QTY
1 1 1 1 3 3 1 AR AR 1 2 3 2 1 1 1 1 2 1 2 1 1 1 1
(09-JUN-04)
SERIAL NO.
REMARKS
(SUB FOR T123252) (SUB FOR T123252)
(COMPLETE CONTROL VALVE LINKAGE ASSEMBLY FOR STANDARD WINCH) (COMPLETE CONTROL VALVE LINKAGE ASSEMBLY FOR POWER IN/POWER OUT WINCH)
3015-9 PN=17
A23 WINCH
30
CONTROLS LINKAGE 3015 LOWER CONTROL VALVE LINKAGE FOR 450H AND 700H CRAWLER T199192
3015-10
-UN-28APR04
THIS PARTS LISTING IS CONTINUED MODEL 40, 4000 AND 4000S WINCHES PC2295
(09-JUN-04) PN=18
A24 WINCH
30
CONTROLS LINKAGE 3015 LOWER CONTROL VALVE LINKAGE FOR 450H AND 700H CRAWLER KEY
1
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28
PART NO.
PART NAME
QTY
AT182296
LINKAGE
1
AT182317
LINKAGE
1
11H233 14M7274 14M7275 19M7402 19M7881 19M7949 19M8600 24H1390 24H1621 24M7036 24M7096 24M7180 24M7239 AT210626 AT210885 AT210991 H76869 L3483N P46404 R64776 T125808 T157641 T165498 T165578 T173539 T173804 T25050
COTTER PIN NUT NUT CAP SCREW SCREW CAP SCREW CAP SCREW SHIM WASHER WASHER WASHER WASHER WASHER BELLCRANK ANGLE BRACKET CLAMP BUSHING PIN FASTENER SPRING BUSHING BUSHING PLATE WASHER STRAP ROD WASHER
6 1 1 5 2 1 1 4 2 2 1 1 4 1 1 1 2 2 2 2 2 1 1 1 2 1 1
MODEL 40, 4000 AND 4000S WINCHES PC2295
(09-JUN-04)
SERIAL NO.
REMARKS
(COMPLETE CONTROL VALVE LINKAGE ASSEMBLY FOR STANDARD WINCH) (COMPLETE CONTROL VALVE LINKAGE ASSEMBLY FOR POWER IN/POWER OUT WINCH)
3015-11 PN=19
B1 WINCH
30
CONTROLS LINKAGE 3015 LOWER CONTROL VALVE LINKAGE FOR 550H, 650H, AND J-SERIES CRAWLER T199191
3015-12
-UN-18MAY04
THIS PARTS LISTING IS CONTINUED MODEL 40, 4000 AND 4000S WINCHES PC2295
(09-JUN-04) PN=20
B2 WINCH
30
CONTROLS LINKAGE 3015 LOWER CONTROL VALVE LINKAGE FOR 550H, 650H, AND J-SERIES CRAWLER KEY
1
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29
PART NO.
PART NAME
QTY
AT186643
LINKAGE
1
AT186646
LINKAGE
1
COTTER PIN NUT NUT CAP SCREW SCREW CAP SCREW CAP SCREW WASHER SHIM WASHER WASHER WASHER WASHER WASHER BELLCRANK BRACKET ANGLE HOSE CLAMP BUSHING SPACER PIN FASTENER SPRING BUSHING PLATE BUSHING LINK ROD
1 1 1 5 2 1 1 2 4 2 2 1 1 1 1 1 1 1 1 2 1 3 2 2 1 1 2 1
11H233 14M7274 14M7275 19M7662 19M7881 19M8413 19M8600 24H1136 24H1390 24H1621 24M7036 24M7096 24M7180 24M7239 AT186381 AT192333 AT210885 .................. H76869 L3483N N203348 P46404 R64776 T125808 T166387 T166441 T173539 T173804
MODEL 40, 4000 AND 4000S WINCHES PC2295
(09-JUN-04)
SERIAL NO.
REMARKS
(COMPLETE CONTROL VALVE LINKAGE ASSEMBLY FOR STANDARD WINCH) (COMPLETE CONTROL VALVE LINKAGE ASSEMBLY FOR POWER IN/POWER OUT WINCH)
(SUB FOR AT186380)
(CUT FROM BULK T100526 MATERIAL)
3015-13 PN=21
B3 WINCH
30
CONTROLS LINKAGE 3015 SHIFT QUADRANT BOOT AND PROTECTIVE EDGING (FOR UNITS EQUIPPED WITH CAB AND WINCH) TP67754
3015-14
-UN-18AUG00
THIS PARTS LISTING IS CONTINUED MODEL 40, 4000 AND 4000S WINCHES PC2295
(12-OCT-00) PN=22
B4 WINCH
30
CONTROLS LINKAGE 3015 SHIFT QUADRANT BOOT (FOR UNITS EQUIPPED WITH CAB AND WINCH) KEY
1
PART NO.
T122611
PART NAME
QTY
BOOT
MODEL 40, 4000 AND 4000S WINCHES PC2295
1
(19-JAN-01)
SERIAL NO.
REMARKS
(INSTALL AROUND SHIFT LEVER UNDER SHIFT QUADRANT PROTRUDING DOWN) (WITH CAB UNITS ONLY)
3015-15 PN=23
B5 WINCH
30
HOUSING AND MOUNTING STRUCTURE 3041 WINCH HOUSING, DRUM AND COVER TP28641
3041-2
-UN-01JAN94
THIS PARTS LISTING IS CONTINUED MODEL 40, 4000 AND 4000S WINCHES PC2295
(01-MAY-00) PN=24
B6 WINCH
30
HOUSING AND MOUNTING STRUCTURE 3041 WINCH HOUSING,DRUM AND COVER KEY
1 2 3 4 5 6 7 8 9 10 11 12 13 14
15 16 17 18 19 20
21 22
PART NO.
PART NAME
QTY
T64769 U12547 19M7662 T64769 R26375 T84700 T84701 T26565 T84710 14M7278 T132914 T132915 T132916 AT151125
DRAIN PLUG O-RING CAP SCREW DRAIN PLUG O-RING COVER GASKET DOWEL PIN HOUSING NUT SET SCREW COMPRESSION SPRING ARRESTOR DRUM
1 1 19 1 2 1 1 2 1 1 1 1 1 1
AT151025 AT181675
DRUM KIT
1 1
T52368 19M7662 T133048 T83426 19M7597 T133170
STRAP CAP SCREW PLATE WASHER CAP SCREW WEDGE
1 1 1 2 2 1
T84818
WEDGE
1
T84819
WEDGE
1
R33138 AT181675
FITTING KIT
1 1
MODEL 40, 4000 AND 4000S WINCHES PC2295
(01-MAY-00)
SERIAL NO.
REMARKS
M10 X 30
M24
(INCLUDES 8 INCH DIAMETER DRUM) (SUB FOR AT87319) (INCLUDES 10 INCH DIAMETER DRUM) (NOT ILLUSTRATED) (FREESPOOL GEAR) (CONTAINS T84696 GEAR AND (6) U42011 DOWELS) (USED TO SERVICE AT151125 OR AT151025 INTERNAL PARTS) M10 X 30 (FOR G CRAWLER WINCH ONLY) (FOR G CRAWLER WINCH ONLY) M20 X 50, (FOR G CRAWLER WINCH ONLY) (FOR USE WITH BREAKAWAY CABLE) (NOT FOR USE WITH 10 INCH DRUM) (TO HOLD CABLE-3/4 INCH) (NOT FOR USE WITH 10 INCH DRUM) (TO HOLD CABLE-1 INCH) (NOT FOR USE WITH 10 INCH DRUM) CONSISTS OF 1 T162677, 1 T84696, 6 U42011
3041-3 PN=25
B7 WINCH
30
HOUSING AND MOUNTING STRUCTURE 3041 WINCH MOUNTING BRACKETS (MODEL 4000 G CRAWLER WINCH ONLY) TP28614
3041-4
-UN-01JAN94
THIS PARTS LISTING IS CONTINUED MODEL 40, 4000 AND 4000S WINCHES PC2295
(01-MAY-00) PN=26
B8 WINCH
30
HOUSING AND MOUNTING STRUCTURE 3041 WINCH MOUNTING BRACKETS (MODEL 4000 G CRAWLER WINCH ONLY) KEY
PART NO.
PART NAME
QTY
1 2
T84809 19M8102
BRACKET CAP SCREW
1 10
3 4 5
T84810 19M8102 T83426
BRACKET CAP SCREW WASHER
1 8 18
MODEL 40, 4000 AND 4000S WINCHES PC2295
(01-MAY-00)
SERIAL NO.
REMARKS
(LEFT MOUNTING) M20 X 65, (MOUNTING BRACKETS TO TRANSVERSE CASE COVER) (RIGHT MOUNTING) M20 X 65, (MOUNTING BRACKETS TO WINCH COVER)
3041-5 PN=27
B9 WINCH
30
HOUSING AND MOUNTING STRUCTURE 3041 MOUNTING QUILL FOR INPUT SHAFT (MODEL 4000 CRAWLER WINCH ONLY) TP51838
3041-6
-UN-21FEB96
THIS PARTS LISTING IS CONTINUED MODEL 40, 4000 AND 4000S WINCHES PC2295
(15-FEB-99) PN=28
B10 WINCH
30
HOUSING AND MOUNTING STRUCTURE 3041 MOUNTING QUILL FOR INPUT SHAFT (MODEL 4000 CRAWLER WINCH ONLY) KEY
PART NO.
PART NAME
QTY
1
19M7872
CAP SCREW
4
2 3 4
H64810 T84813 T126119
O-RING BEARING HOUSING W/O BEARING GASKET
1 1 1
MODEL 40, 4000 AND 4000S WINCHES PC2295
(15-FEB-99)
SERIAL NO.
REMARKS
M12 X 25, (MOUNTING QUILL TO TRANSVERSE CASE REAR COVER) (INPUT SHAFT)
3041-7 PN=29
B11 WINCH
30
HOUSING AND MOUNTING STRUCTURE 3041 DRAIN PORT RETURN TUBE (MODEL 4000 G CRAWLER WINCH ONLY) (UNIT SERIAL NO. -XXXXXX) TP27354
3041-8
-UN-01JAN94
THIS PARTS LISTING IS CONTINUED MODEL 40, 4000 AND 4000S WINCHES PC2295
(01-MAY-00) PN=30
B12 WINCH
30
HOUSING AND MOUNTING STRUCTURE 3041 DRAIN PORT RETURN TUBE (MODEL 4000 G CRAWLER WINCH ONLY) (UNIT SERIAL NO. -XXXXXX) KEY
PART NO.
PART NAME
QTY
1
19M7402
CAP SCREW
2
2 3 4 5 6 7
24M7239 T84937 T120860 U12547 T13119 AT87504
WASHER PLATE GASKET O-RING O-RING OIL LINE
2 1 1 1 1 1
MODEL 40, 4000 AND 4000S WINCHES PC2295
(01-MAY-00)
SERIAL NO.
REMARKS
M10 X 25, (RETURN TUBE PLATE TO TRANSVERSE CASE COVER) 10.700 X 21 X 2.500 MM (RETURN TUBE)
(RETURN TUBE)
3041-9 PN=31
B13 WINCH
30
HOUSING AND MOUNTING STRUCTURE 3041 DRAIN PORT RETURN HOSE (MODEL 4000 G CRAWLER WINCH ONLY) (UNIT SERIAL NO. XXXXXX) TP27355
3041-10
-UN-01JAN94
THIS PARTS LISTING IS CONTINUED MODEL 40, 4000 AND 4000S WINCHES PC2295
(01-MAY-00) PN=32
B14 WINCH
30
HOUSING AND MOUNTING STRUCTURE 3041 DRAIN PORT RETURN HOSE (MODEL 4000 G CRAWLER WINCH ONLY) (UNIT SERIAL NO. XXXXXX) KEY
1 2
PART NO.
U12547 AT141929
PART NAME
QTY
O-RING HYDRAULIC HOSE
MODEL 40, 4000 AND 4000S WINCHES PC2295
2 1
(01-MAY-00)
SERIAL NO.
REMARKS
1-1/16" X 22-3/4" X 1-1/16", (WINCH DRAIN PORT TO TRANSVERSE CASE REAR COVER)
3041-11 PN=33
B15 WINCH
30
HOUSING AND MOUNTING STRUCTURE 3041 VALVE COVER (MODEL 4000 FOR G CRAWLERS ONLY) TP28660
3041-12
-UN-01JAN94
THIS PARTS LISTING IS CONTINUED MODEL 40, 4000 AND 4000S WINCHES PC2295
(01-MAY-00) PN=34
B16 WINCH
30
HOUSING AND MOUNTING STRUCTURE 3041 VALVE COVER (MODEL 4000 FOR G CRAWLERS ONLY) KEY
1 2 3
PART NO.
19M7550 24M7101 T141646
PART NAME
QTY
CAP SCREW WASHER COVER
MODEL 40, 4000 AND 4000S WINCHES PC2295
2 2 1
(01-MAY-00)
SERIAL NO.
REMARKS
M10 X 35 11 X 34 X 3 MM
3041-13 PN=35
B17 WINCH
30
HOUSING AND MOUNTING STRUCTURE 3041 WINCH HOUSING AND COVER (MODEL 4000S) TP52237
3041-14
-UN-11FEB99
THIS PARTS LISTING IS CONTINUED MODEL 40, 4000 AND 4000S WINCHES PC2295
(08-MAR-06) PN=36
B18 WINCH
30
HOUSING AND MOUNTING STRUCTURE 3041 WINCH HOUSING AND COVER (MODEL 4000S) KEY
PART NO.
PART NAME
QTY
1 2 3 4 5 6 7 8 9 10 11 12 13 14
T84826 T173042 19M7662 19M8093 T173080 T173079 19M7402 R33138 R26375 T164554 AT219961 AT186201 AT211002 AT188450
GASKET HOUSING CAP SCREW CAP SCREW GASKET COVER CAP SCREW FITTING O-RING ADAPTER FITTING HYDRAULIC FILTER SEAL KIT SELF-OPERATING VALVE PRESSURE RELIEF VALVE
1 1 36 7 1 1 4 3 3 1 1 1 1 1
15
AT186200
SEAL KIT
1
MODEL 40, 4000 AND 4000S WINCHES PC2295
(08-MAR-06)
SERIAL NO.
REMARKS
(WINCH GEAR HOUSING) (WINCH GEAR) M10 X 30 M10 X 100 M10 X 25 (FILTER) (WINCH) (FILTER BYPASS VALVE) (SUB FOR AT210259) (PRESSURE REGULATING VALVE)
3041-15 PN=37
B19 WINCH
30
MOUNTING BRACKET
3042
MOUNTING BRACKET (MODEL 4000S ON 450H) T165674
3042-2
-UN-03MAR03
THIS PARTS LISTING IS CONTINUED MODEL 40, 4000 AND 4000S WINCHES PC2295
(09-MAY-03) PN=38
B20 WINCH
30
MOUNTING BRACKET
3042
MOUNTING BRACKET (MODEL 4000S ON 450H) KEY
PART NO.
PART NAME
QTY
1
..................
HOSE
2 3 4 5 6 7 8
TY22464 E69975 AT101565 AT183546 19M8147 T113128 ..................
CLAMP CLAMP AIR FILTER SHIELD CAP SCREW SCREW DRIVE SHAFT
2 1 1 1 2 4 1
8A
AT191819
DRIVE SHAFT
1
9 10 11 11A 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 39A
T185657 T185658 T185660 T113128 M41029 AT186214 T185656 24H1305 14H1076 T164218 T36393 T163182 19M8011 19M7950 T83426 14M7302 T165242 19M7403 AT185431 AT185430 T163667 19M7921 AT184151 24M7096 19M8324 19M7402 AT191330 T50842 T165407 T102934 AT184152 T163666 19M7969 14H1039 RE52347 AT105020
BOOT CLAMP CLAMP SCREW SNAP RING UNIVERSAL JOINT YOKE UNIVERSAL JOINT YOKE WASHER NUT BRACKET U-BOLT SPACER CAP SCREW CAP SCREW WASHER WELD NUT GUARD CAP SCREW GUARD GUARD BRACKET CAP SCREW BRACKET WASHER CAP SCREW CAP SCREW VALVE COVER FILLER CAP GUARD CLAMP BRACKET BRACKET CAP SCREW NUT CROSS AND BEARING ASSEMBLY KIT
1 1 1 4 1 1 1 4 4 1 1 1 1 6 22 3 1 3 1 1 1 8 1 7 2 6 1 1 1 1 1 1 8 4 2 2
40 41
N119316 AT209110 T69938
SNAP RING HINGE HALF CLAMP
8 1 4
MODEL 40, 4000 AND 4000S WINCHES PC2295
AR
(09-JUN-04)
SERIAL NO.
REMARKS
(MAKE FROM M87571, SIX FEET LONG, CUT TO LENGTH) (SUB FOR AR21836) (U-JOINT REAR) M20 X 90 5/16" X 3/4" (5C WING UNIVERSAL JOINT CROSS) ( AT207530 NO LONGER AVAILABLE) (SUB AT191819, T185656, T185661, (8) T113128 AND (4) T69938) (ROUND UNIVERSAL JOINT CROSS) (SUB FOR AT207530) (NOT ILLUSTRATED) (NOT ILLUSTRATED) (NOT ILLUSTRATED) 5/16" X 3/4" (5C WING BEARING) 13/32" X 13/16" X 0.065" 3/8"
M12 X 30 M20 X 45 M12 M12 X 35 (WINCH) (RIGHT HAND WINCH MOUNTING) M20 X 150 10.500 X 18 X 1.600 MM M10 X 16 M10 X 25 (SUB FOR AT184773) (WITH DOOR) (NOT ILLUSTRATED)
(LEFT HAND WINCH MOUNTING) M20 X 110 5/8", (USED ON T164218 BRACKET) (5C WING BEARING) (ROUND STYLE UNIVERSAL JOINT CROSS) (INCLUDES (4) N119316 SNAP RINGS)
3042-3 PN=39
B21 WINCH
30
MOUNTING BRACKET
3042
VALVE COVER AND SHIELD (FOR 4000S WINCH ON 550H AND 650H ONLY) TP67715
3042-4
-UN-04APR00
THIS PARTS LISTING IS CONTINUED MODEL 40, 4000 AND 4000S WINCHES PC2295
(01-MAY-00) PN=40
B22 WINCH
30
MOUNTING BRACKET
3042
MOUNTING BRACKET (FOR 4000S WINCH ON 550H AND 650H ONLY) KEY
1 2 3 4 5
PART NO.
19M7402 24M7096 T213128 AT191329 AT209110
PART NAME
QTY
CAP SCREW WASHER GUARD VALVE COVER HINGE
MODEL 40, 4000 AND 4000S WINCHES PC2295
5 5 1 1 1
(16-MAR-05)
SERIAL NO.
REMARKS
M10 X 25 10.500 X 18 X 1.600 MM (SUB FOR T166525) (SUB FOR AT184774)
3042-5 PN=41
B23 WINCH
30
MOUNTING BRACKET
3042
MOUNTING BRACKET (MODEL 4000S ON 700H) T205682
3042-6
-UN-07JAN05
THIS PARTS LISTING IS CONTINUED MODEL 40, 4000 AND 4000S WINCHES PC2295
(16-MAR-05) PN=42
B24 WINCH
30
MOUNTING BRACKET
3042
MOUNTING BRACKET (MODEL 4000S ON 700H) KEY
1 2 3
PART NO.
PART NAME
QTY
T177837 19H2960 AT191821
PLATE CAP SCREW UNIVERSAL DRIVESHAFT
1 8 1
AT105020
KIT
2
11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27
N119316 T185657 T185658 T185660 19M8011 24H1305 14H1076 14H1039 T36393 M41029 T185656 M41029 AT191818 T164218 19M8346 AT222133 T177793 19M7550 19M7950 T177836 19M8324 AT222136 AT209110 AT222134 24M7243 T177851 19M7892 AT222137 ..................
28 29 30 31 32
TY22464 AT101565 E69975 T163182 AT228722
CLAMP AIR FILTER CLAMP SPACER INDICATOR LIGHT
2 1 1 1 1
AT312566
WARNING LIGHT KIT
1
AT221941 T69938
MOUNTING PARTS HALF CLAMP
1 4
4 5 6 7 8 9 10
33 34
SNAP RING BOOT CLAMP CLAMP CAP SCREW WASHER NUT NUT U-BOLT SNAP RING UNIVERSAL JOINT YOKE SNAP RING UNIVERSAL JOINT BRACKET CAP SCREW BRACKET PLATE CAP SCREW CAP SCREW COVER CAP SCREW COVER HINGE COVER WASHER COVER CAP SCREW COVER HOSE
MODEL 40, 4000 AND 4000S WINCHES PC2295
(16-MAR-05)
4 1 1 1 1 4 4 4 1 1 1 1 1 1 20 1 1 4 2 1 11 1 1 1 16 1 8 1 AR
SERIAL NO.
REMARKS
(DRIVESHAFT RETAINER PLATE) 3/8" X 1-3/4" (INCLUDES (2) AT105020, T185657, T185658 AND T185660) (WINCH) (NOT ILLUSTRATED) (JOURNAL AND BEARING KIT) (INCLUDES (4) N119316) (NOT ILLUSTRATED) (NOT ILLUSTRATED) (NOT ILLUSTRATED) (NOT ILLUSTRATED) M12 X 30 13/32" X 13/16" X 0.065" 3/8" 5/8"
(NOT ILLUSTRATED) (INCLUDES M41029 AND T185656) (FIELD KIT) M24 X 70 (WINCH MOUNTING) (SUMP GUARD COVER) M10 X 35 M20 X 45 (RIGHT COVER PLATE) M10 X 16 (UPPER SIDE RIGHT) (WINCH VALVE) 25.400 X 50 X 6 MM (LEFT COVER PLATE) M20 X 80 (UPPER SIDE LEFT COVER) (CUT FROM M87571,7.58 INCHES (192.59MM)UPPER HOSE LENGTH) (CUT FROM M87571,60.68 INCHES (1541.55MM) LOWER HOSE LENTH) (SUB FOR AR21836) (CUT FROM M87571,60.68 INCHES (1541.55MM)) (OIL PRESSURE WARNING LIGHT INSTALLED ON CONTROL PANEL) (OIL PRESSURE WARNING LIGHT KIT) (INCLUDES INSTRUCTIONS, OIL PRESSURE DECAL, AND INDICATOR LIGHT) (ENTIRE WINCH MOUNT ASSEMBLY)
3042-7 PN=43
C1 WINCH
30
FAIRLEAD AND ROLLERS FAIRLEAD TP52235
3045-2
-UN-12FEB99
THIS PARTS LISTING IS CONTINUED MODEL 40, 4000 AND 4000S WINCHES PC2295
(15-FEB-99) PN=44
C2 WINCH
30
FAIRLEAD AND ROLLERS FAIRLEAD KEY
PART NO.
PART NAME
QTY
1 2 3 4 5 6 7 8 9 10
T131557 N2445W T16448 AT139774 JD7759 T131541 34H385 T131540 AT139775 AT175528
BUSHING WASHER BUSHING ROLLER BEARING LUBRICATION FITTING SHAFT SPRING PIN SHAFT ROLLER BEARING FRAME
2 8 8 2 4 2 4 2 2 1
11
19M7597
CAP SCREW
4
12 13 14
19M8102 T83426 AT175529 T158619
CAP SCREW WASHER GUIDE BUSHING
4 4 1 4
MODEL 40, 4000 AND 4000S WINCHES PC2295
(14-OCT-96)
SERIAL NO.
REMARKS
(IN WINCH HOUSING MOUNTING EARS) (PRESS INTO ROLLER TO BOTTOM OF BORE) (CONTAINS T16448, BUSHING) 1/4" X 1-3/4" (CONTAINS T16448, BUSHING) (ALSO ORDER (4) T158619 AND (4) 19M8102) (SUB FOR AT139773) M20 X 50, (FAIRLEAD TO LOWER MOUNTING HOLES ON WINCH) (WITHOUT DOWEL) M20 X 65, (WITH DOWEL) (SUB FOR AT139844) (FAIRLEAD)
3045-3 PN=45
C3 WINCH
30
DRIVES AND CLUTCHES 3050 DRIVEN SHAFT, GEAR AND BEARINGS (STANDARD SPEED WINCHES) (FOR "D" SERIES SKIDDERS) TP27362
3050-2
-UN-01JAN94
THIS PARTS LISTING IS CONTINUED MODEL 40, 4000 AND 4000S WINCHES PC2295
(10-OCT-90) PN=46
C4 WINCH
30
DRIVES AND CLUTCHES 3050 DRIVEN SHAFT, GEAR AND BEARINGS (STANDARD SPEED WINCHES) (FOR "D" SERIES SKIDDERS) (FOR ALL TIMBERJACK WINCHES) KEY
1 2 3 4 5 6 7 8 9 10 11 12 13
PART NO.
AT12431 T37592 T37593 T37594 T43615 JD7418 JD8129 R44365 R44366 R44367 U42392 T51622 T84714 T48412 T56840 JD8129 19M7662
PART NAME
QTY
SEAL SHIM SHIM SHIM BEARING HOUSING W/O BEARING BEARING CUP BEARING CONE SHIM SHIM SHIM SNAP RING BEARING HOUSING W/O BEARING SHAFT SHIFT COLLAR GEAR BEARING CONE CAP SCREW
MODEL 40, 4000 AND 4000S WINCHES PC2295
(10-MAY-95)
1 AR AR AR 1 2 1 AR AR AR 1 1 1 1 1 1 6
SERIAL NO.
REMARKS
(.002 INCHES) (.005 INCHES) (.010 INCHES)
(.003 INCHES) (.005 INCHES) (.010 INCHES) (BEVEL GEAR) (SUB FOR T128073) (BEVEL) (SUB FOR T128074) M10 X 30
3050-3 PN=47
C5 WINCH
30
DRIVES AND CLUTCHES 3050 DRIVEN SHAFT, GEAR AND BEARINGS (CRAWLER STANDARD LOW SPEED WINCH) (FOR "E" SERIES SKIDDERS) TP27380
3050-4
-UN-01JAN94
THIS PARTS LISTING IS CONTINUED MODEL 40, 4000 AND 4000S WINCHES PC2295
(10-OCT-90) PN=48
C6 WINCH
30
DRIVES AND CLUTCHES 3050 DRIVEN SHAFT, GEAR AND BEARING (CRAWLER STANDARD LOW SPEED WINCHES) (FOR "E" SERIES SKIDDERS) KEY
1 2 3 4 5 6 7
8 9
10 11 12
PART NO.
AT12431 T37592 T37593 T37594 T43615 JD7418 JD8129 26H85 ..................
PART NAME
QTY
SEAL SHIM SHIM SHIM BEARING HOUSING W/O BEARING BEARING CUP BEARING CONE SHAFT KEY
1 AR AR AR 1 2 1 1 1
T205947
SHAFT
1
R63692 JD8129
GEAR BEARING CONE
1 1
AT307653
BEARING CONE
1
R44365 R44366 R44367 T51622 19M7662
SHIM SHIM SHIM BEARING HOUSING W/O BEARING CAP SCREW
MODEL 40, 4000 AND 4000S WINCHES PC2295
(09-JUN-04)
AR AR AR 1 6
SERIAL NO.
REMARKS
(.002 INCHES) (.005 INCHES) (.010 INCHES)
1/4" X 1" (T84877 NO LONGER AVAILABLE) (USE COMPONENTS T205947 AND AT307653) (DRIVEN) (PLEASE NOTE STAMPED NUMBER) (SQUARE BEARING SHOULDER CORNER) (SKIDDER SERIAL NO. -589976) (USE WITH AT307653) (PLEASE NOTE STAMPED NUMBER) (FOR TOWM132 XXXXX- ON CRAWLER LOW SPEED (SKIDDER SERIAL NO. 589977-) (5 MM BEARING SHOULDER) (DRIVE) (PLEASE NOTE STAMPED NUMBER 25581) (SKIDDER SERIAL NO. -589976) (USE WITH T205947) (PLEASE NOTE STAMPED NUMBER 25582) (FOR TOWM132 XXXXX- FOR 4000S CRAWLER LOW SPEED) (SKIDDER SERIAL NO. 589977-) (.003 INCHES) (.005 INCHES) (.010 INCHES) M10 X 30
3050-5 PN=49
C7 WINCH
30
DRIVES AND CLUTCHES 3050 DRIVEN SHAFT, GEAR AND BEARINGS (POWER IN/POWER OUT WINCH) TP27345
3050-6
-UN-01JAN94
THIS PARTS LISTING IS CONTINUED MODEL 40, 4000 AND 4000S WINCHES PC2295
(25-APR-90) PN=50
C8 WINCH
30
DRIVES AND CLUTCHES 3050 DRIVEN SHAFT, GEAR AND BEARINGS (POWER IN/POWER OUT WINCH) KEY
1 2 3 4 5 6 7 8 9
10 11
12
13 14 15 16 17 18 19 20 21 22
PART NO.
PART NAME
QTY
AT12431 T37592 T37593 T37594 T43615 JD7418 JD8129 T84735 R44357 R44358 R44359 T16573 T56840
SEAL SHIM SHIM SHIM BEARING HOUSING W/O BEARING BEARING CUP BEARING CONE SPACER SHIM SHIM SHIM PIN GEAR
T129870
GEAR
1
T84834 T48412
SHAFT SHIFT COLLAR
1 1
T129869
SHIFT COLLAR
1
T56840
GEAR
1
T129870
GEAR
1
JD8129 R44365 R44366 R44367 T51622 19M7662 F2863R H86839 T58769 T142389 T132939 T22827 15H558
BEARING CONE SHIM SHIM SHIM BEARING HOUSING W/O BEARING CAP SCREW SNAP RING SNAP RING SHIFTER PISTON SLEEVE O-RING PIPE PLUG
MODEL 40, 4000 AND 4000S WINCHES PC2295
(22-JAN-92)
SERIAL NO.
1 AR AR AR 1 2 1 1 AR AR AR 1 1
1 AR AR AR 1 6 1 1 1 1 1 2 1
REMARKS
(.002 INCHES) (.005 INCHES) (.010 INCHES)
(.003 INCHES) (.005 INCHES) (.010 INCHES) (DRIVEN) (FOR STANDARD SPEED POWER-IN/POWER-OUT WINCH) (SUB FOR T128074) (SUB FOR T127945) (DRIVEN) (FOR LOW SPEED POWER-IN/POWER-OUT WINCH) (BEVEL GEAR) (FOR STANDARD SPEED POWER-IN/POWER-OUT WINCH) (SUB FOR T128073) (SUB FOR T127944) (FOR LOW SPEED POWER-IN/POWER-OUT WINCH) (BEVEL GEAR) (SUB FOR T128074) (DRIVEN) (FOR STANDARD SPEED POWER-IN/POWER- OUT WINCH) (DRIVEN) (FOR LOW SPEED POWER-IN/POWER OUT WINCH) (.003 INCHES) (.005 INCHES) (.010 INCHES) M10 X 30 -XXXXXX XXXXXX(SUB FOR T132946) (ALSO ORDER H86839) (SHIFT) (INSTALL IN SHIFTER BORE OF WINCH HOUSING) 1/8", AUTOMOTIVE HEX CSK
3050-7 PN=51
C9 WINCH
30
DRIVES AND CLUTCHES 3050 INPUT SHAFT AND CLUTCH COVER (FOR MODEL 4000 "D" SERIES SKIDDER WINCHES ONLY) TP26619
3050-8
-UN-01JAN94
THIS PARTS LISTING IS CONTINUED MODEL 40, 4000 AND 4000S WINCHES PC2295
(10-MAY-95) PN=52
C10 WINCH
30
DRIVES AND CLUTCHES 3050 INPUT SHAFT AND CLUTCH HOUSING (FOR MODEL 4000 "D" SERIES SKIDDER WINCHES ONLY) KEY
1 2 3 4 5 6 7 8 9
PART NO.
PART NAME
QTY
11 12
JD8865 T160179 AU13137 R1225R T84826 T84802 19M7662 AT48334 T37587 T81880 M4259T L4388T 11M7017 14H534
NEEDLE BEARING SHAFT TAPERED ROLLER BEARING O-RING GASKET HOUSING CAP SCREW SEAL UNIVERSAL JOINT UNIVERSAL JOINT YOKE WASHER WASHER COTTER PIN NUT
1 1 1 1 1 1 13 1 1 1 1 1 1 1
13 14
J13155 T64769 U12547
NUT DRAIN PLUG O-RING
1 2 2
10
MODEL 40, 4000 AND 4000S WINCHES PC2295
(11-JUL-00)
SERIAL NO.
REMARKS
(SUB FOR T81954) (INPUT)
(CLUTCH) M10 X 30 (CANNOT BE USE WITH WINCH ON 648D SKIDDER) (USE ONLY WITH WINCH ON 648D SKIDDER) (CANNOT BE USE WITH WINCH ON 648D SKIDDER) (USE ONLY WITH WINCH ON 648D SKIDDER) 3.200 X 32 MM 3/4", (CANNOT BE USE WITH WINCH ON 648D SKIDDER) (USE ONLY WITH WINCH ON 648D SKIDDER)
3050-9 PN=53
C11 WINCH
30
DRIVES AND CLUTCHES 3050 INPUT SHAFT AND CLUTCH COVER (FOR MODEL 40 WINCH ONLY) TP51818
3050-9A
-UN-18JAN96
THIS PARTS LISTING IS CONTINUED MODEL 40, 4000 AND 4000S WINCHES PC2295
(29-MAR-96) PN=54
C12 WINCH
30
DRIVES AND CLUTCHES 3050 INPUT SHAFT AND CLUTCH COVER (FOR OPTIONAL MODEL 40 WINCH ONLY) KEY
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
PART NO.
JD8865 RE47323 JD9172 JD8952 T133035 JD8969 JD7418 T84826 19M7662 AT13161 T133139 T142043 T191060 R54124 19H3761
PART NAME
QTY
NEEDLE BEARING KIT BEARING CUP BEARING CONE SHAFT BEARING CONE BEARING CUP GASKET CAP SCREW SEAL WASHER COVER UNIVERSAL JOINT YOKE WASHER CAP SCREW
1 AR 1 1 1 1 1 1 13 1 1 1 1 1 1
MODEL 40, 4000 AND 4000S WINCHES PC2295
(09-JUN-04)
SERIAL NO.
REMARKS
BEARING (INPUT)
M10 X 30 (SUB FOR T133036) (SUB FOR T148423) 3/4" X 1-1/4"
3050-9B PN=55
C13 WINCH
30
DRIVES AND CLUTCHES 3050 INPUT SHAFT AND CLUTCH COVER (FOR MODEL 4000 "E" SERIES SKIDDER WINCHES ONLY) TP28737
3050-9C
-UN-01JAN94
THIS PARTS LISTING IS CONTINUED MODEL 40, 4000 AND 4000S WINCHES PC2295
(22-JAN-92) PN=56
C14 WINCH
30
DRIVES AND CLUTCHES 3050 INPUT SHAFT AND CLUTCH COVER (FOR MODEL 4000 "E" SERIES SKIDDER WINCHES ONLY) KEY
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
PART NO.
JD8865 T160179 AU13137 T40703 T128162 T128161 19M7572 AT48334 T185661 M4259T 11M7017 14H534 R27218 R26448 T121280
PART NAME
QTY
NEEDLE BEARING SHAFT TAPERED ROLLER BEARING O-RING GASKET HOUSING CAP SCREW SEAL UNIVERSAL JOINT YOKE WASHER COTTER PIN NUT FITTING PLUG O-RING SEAL
MODEL 40, 4000 AND 4000S WINCHES PC2295
(09-JUN-04)
1 1 1 1 1 1 16 1 1 1 1 1 5 5 1
SERIAL NO.
REMARKS
(SUB FOR T81954) (INPUT)
(CLUTCH COVER) M10 X 45 (SUB FOR T132316) 3.200 X 32 MM 3/4"
3050-9D PN=57
C15 WINCH
30
DRIVES AND CLUTCHES 3050 INPUT SHAFT AND CLUTCH COVER (CRAWLER STANDARD WINCH) (MODEL 4000) TP26620
3050-10
-UN-01JAN94
THIS PARTS LISTING IS CONTINUED MODEL 40, 4000 AND 4000S WINCHES PC2295
(15-FEB-99) PN=58
C16 WINCH
30
DRIVES AND CLUTCHES 3050 INPUT SHAFT AND CLUTCH COVER (CRAWLER WINCH - STANDARD SPEED AND POWER IN/POWER OUT STANDARD SPEED) (MODEL 4000) KEY
PART NAME
QTY
2 3 4 5 6
JD9830 JD8855 R33320 T84727 T84733 H96149 JD10329
NEEDLE BEARING NEEDLE BEARING SNAP RING GEAR SHAFT BUSHING BALL BEARING
1 1 1 1 1 1 1
7 8 9 10 11 12 13
L1152N T19388 T84826 T84801 T15610 40M7044 19M7662
SNAP RING SEAL GASKET HOUSING PLUG SNAP RING CAP SCREW
1 1 1 1 1 1 13
1
PART NO.
MODEL 40, 4000 AND 4000S WINCHES PC2295
(19-JAN-01)
SERIAL NO.
REMARKS
(700H) (INPUT DRIVE) (19 TEETH) (INPUT) (SUB FOR AT142051) (SUB FOR JD9344, THIS APPLICATION)
(CLUTCH) 72 X 2.5 SPRST (INTERNAL) M10 X 30, (CLUTCH HOUSING COVER TO WINCH HOUSING)
3050-11 PN=59
C17 WINCH
30
DRIVES AND CLUTCHES 3050 INPUT SHAFT AND CLUTCH COVER (CRAWLER STANDARD LOW SPEED AND POWER IN/POWER OUT WINCHES) (MODEL 4000) TP27306
3050-12
-UN-01JAN94
THIS PARTS LISTING IS CONTINUED MODEL 40, 4000 AND 4000S WINCHES PC2295
(15-FEB-99) PN=60
C18 WINCH
30
DRIVES AND CLUTCHES 3050 INPUT SHAFT AND CLUTCH COVER (CRAWLER WINCH - LOW SPEED AND POWER IN/POWER OUT LOW SPEED) (MODEL 4000) KEY
PART NO.
PART NAME
QTY
1 2 3 4 5 6 7 8 9 10 11 12 13 14
R33320 T84727 T84729 R33344 T84812 JD7145 L1152N M70619 T15610 T84801 T84826 T19388 40M1870 JD10329
SNAP RING GEAR GEAR SPACER SHAFT BALL BEARING SNAP RING SNAP RING PLUG HOUSING GASKET SEAL SNAP RING BALL BEARING
2 2 1 1 1 1 2 1 1 1 1 1 1 1
15 16 17 18
B11030 T84733 A16769 JD9830 JD8855 19M7662
SPACER SHAFT BUSHING NEEDLE BEARING NEEDLE BEARING CAP SCREW
1 1 1 1 1 13
19
MODEL 40, 4000 AND 4000S WINCHES PC2295
(19-JAN-01)
SERIAL NO.
REMARKS
(INPUT DRIVE) (19 TEETH) (INPUT, LOW SPEED) (37 TEETH) (LOW SPEED IDLER)
(CLUTCH) 72 X 2.5 SPRST - ZN (INTERNAL) (SUB FOR AT142051) (SUB FOR JD9344, THIS APPLICATION) (INPUT) (700H) M10 X 30, (CLUTCH HOUSING COVER TO WINCH HOUSING)
3050-13 PN=61
C19 WINCH
30
DRIVES AND CLUTCHES 3050 FREESPOOL PISTON AND BEARINGS TP28692
3050-14
-UN-01JAN94
THIS PARTS LISTING IS CONTINUED MODEL 40, 4000 AND 4000S WINCHES PC2295
(04-OCT-91) PN=62
C20 WINCH
30
DRIVES AND CLUTCHES 3050 FREESPOOL PISTON AND BEARINGS KEY
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15
16 17 18 19
PART NO.
PART NAME
QTY
19M7662 T142170
CAP SCREW BEARING HOUSING W/O BEARING
10 1
T84697
SLEEVE
1
T84699 AT173348 JD8915 JD8245 T131313 T132805 AT139629 AT181675
GASKET SEAL BEARING CONE BEARING CUP WASHER SPRING GEAR KIT
1 2 2 2 1 1 1 1
T131317 19M7662 T131318 T41326 R35501 R35502 R35503 T142169
WASHER CAP SCREW PISTON O-RING SHIM SHIM SHIM BEARING HOUSING W/O BEARING
T84697
SLEEVE
1
19M7662 R26448 R27218 T142269
CAP SCREW O-RING FITTING PLUG V-RING SEAL
6 1 1 2
MODEL 40, 4000 AND 4000S WINCHES PC2295
(04-APR-02)
1 2 1 2 AR AR AR 1
SERIAL NO.
REMARKS
M10 X 30 (DRUM) (IF WINCH SERIAL NUMBER IS PRIOR TO 001945 T142269 V-RING SEAL MUST ALSO BE ORDERED) (SUB FOR T84698) (ON DRUM TO QUILL SEAL - USE IF NEEDED TO REPAIR THE QUILL OIL SEAL SURFACE) (SUB FOR AT157171)
(FREESPOOL) (NOT ILLUSTRATED) (FREESPOOL GEAR) (CONTAINS (6) U42011 DOWELS AND T84696 GEAR) (USED TO SERVICE AT139629 INTERNAL PARTS) M10 X 30 (FREESPOOL) (.003 INCHES) (.005 INCHES) (.010 INCHES) (FREESPOOL) (IF WINCH SERIAL NUMBER IS PRIOR TO 001945, T142269 V-RING MUST ALSO BE ORDERED) (SUB FOR T84703) (ON DRUM TO QUILL SEAL - USE IF NEEDED TO REPAIR THE QUILL OIL SEAL SURFACE) M10 X 30
3050-15 PN=63
C21 WINCH
30
DRIVES AND CLUTCHES 3050 FINAL DRIVE SHAFT AND FINAL DRIVE GEAR TP27201
3050-16
-UN-01JAN94
THIS PARTS LISTING IS CONTINUED MODEL 40, 4000 AND 4000S WINCHES PC2295
(24-MAR-94) PN=64
C22 WINCH
30
DRIVES AND CLUTCHES 3050 FINAL DRIVE SHAFT AND FINAL DRIVE GEAR KEY
1 2 3 4 5 6 7
8 9
PART NO.
PART NAME
QTY
19M7662 T84702 T51625 R46323 R46324 R46325 JD8210 JD8159 T161932
CAP SCREW BEARING HOUSING W/O BEARING O-RING SHIM SHIM SHIM BEARING CUP BEARING CONE GEAR
T106838
GEAR
1
T84709 ..................
SPACER SHAFT
1 1
T205946
SHAFT
1
T205947 AT307653
SHAFT BEARING CONE
1 1
MODEL 40, 4000 AND 4000S WINCHES PC2295
(09-JUN-04)
3 1 1 AR AR AR 2 2 1
SERIAL NO.
REMARKS
M10 X 30 (FINAL DRIVE) (.003 INCHES) (.005 INCHES) (.010 INCHES) (SUB FOR T83328) FINAL DRIVE (68 TEETH) (FOR 8 INCH DRUM WITH 16.51 : 1 RATIO) FINAL DRIVE (66 TEETH) (DEEP REDUCTION) (FOR 8 AND 10 INCH DRUMS WITH 19.56 : 1 RATIO ) (T131312 NO LONGER AVAILABLE) (SUPPLY COMPONENTS AT307653, T205947, AND T205946) (FINAL DRIVE) (SKIDDER SERIAL NO. -589976) (DRUM SHAFT) (NOTE STAMPED PART NUMBER) (SKIDDER SERIAL NO. 589977-) (BEVEL DRIVEN SHAFT)
3050-17 PN=65
C23 WINCH
30
DRIVES AND CLUTCHES 3050 REDUCTION GEAR, SHAFT AND BEARINGS TP27202
3050-18
-UN-01JAN94
THIS PARTS LISTING IS CONTINUED MODEL 40, 4000 AND 4000S WINCHES PC2295
(24-MAR-94) PN=66
C24 WINCH
30
DRIVES AND CLUTCHES 3050 REDUCTION GEAR, SHAFT AND BEARINGS KEY
1 2 3
PART NO.
PART NAME
QTY
JD8652 JD8346 T84711
CYLINDRICAL ROLLER BEARING BEARING RACE PINION
1 1 1
T142438
PINION
1
4 5 6 7 8 9
T84712 R712R T131361 T24862 T84713 JD10329
GEAR SNAP RING CYLINDRICAL ROLLER BEARING PINION SHAFT BALL BEARING
1 2 1 1 1 1
10
AT139682
CYLINDRICAL ROLLER BEARING
1
MODEL 40, 4000 AND 4000S WINCHES PC2295
(06-NOV-97)
SERIAL NO.
REMARKS
FINAL REDUCTION (12 TEETH) (FOR 8 INCH DRUM WITH 16.51 : 1 RATIO) FINAL REDUCTION (10 TEETH) (DEEP REDUCTION) (FOR 8 AND 10 INCH DRUMS WITH 19.56 : 1 RATIO ) (FIRST REDUCTION) (40 TEETH) (INNER RACE STRAIGHT ROOLER) (FIRST REDUCTION) (13 TEETH) (FIRST REDUCTION) (SUB FOR AT142051) (SUB FOR JD9344, THIS APPLICATION) (OUTER RACE STRAIGHT ROLLER)
3050-19 PN=67
D1 WINCH
30
DRIVES AND CLUTCHES 3050 CLUTCH PISTON (CRAWLER WINCH) TP43035
3050-20
-UN-01JAN94
THIS PARTS LISTING IS CONTINUED MODEL 40, 4000 AND 4000S WINCHES PC2295
(15-APR-93) PN=68
D2 WINCH
30
DRIVES AND CLUTCHES 3050 CLUTCH PISTON (CRAWLER WINCH) KEY
PART NO.
1 2 3 4 5 6 7 8 9
19M8535 15H558 T54533 T54532 R33248 T84814 26H93 AT139681 T131338 T162454 T165366 R32694 AR48377 F2197R R81735 R46218 R33246 R67840 R33247 R40184 R80813 RE239058 R57621 T141680 AT87409 T127304 T104707 R28634 F2197R JD10329 19M7662 R57345
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
PART NAME
QTY
CAP SCREW PIPE PLUG FITTING MANIFOLD PISTON RING GEAR SHAFT KEY BALL BEARING BEARING HOUSING W/O BEARING BEARING HOUSING W/O BEARING BEARING HOUSING W/O BEARING PIN FASTENER DRUM SNAP RING PISTON SEAL SEAL DISK SPRING SNAP RING THRUST WASHER CLUTCH PLATE DISK WITH INNER SPLINE CLUTCH PLATE SNAP RING GEAR THRUST WASHER WASHER PIN SNAP RING BALL BEARING CAP SCREW CLUTCH PLATE
MODEL 40, 4000 AND 4000S WINCHES PC2295
(16-MAR-05)
3 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 1 1 3 4 1 1 1 1 1 1 1 1 6 1
SERIAL NO.
REMARKS
M6 X 70 1/8" (OIL CLUTCH) (INPUT) 1/4" X 1-1/4" (MODEL 4000) (MODEL 4000) (WITH INTERNAL SUMP) (MODEL 4000S) (CLUTCH WITH PINS) (CONTAINS R32694)
( AR94516 NO LONGER AVAILABLE) (SUB FOR R31289, THIS APPLICATION) (CLUTCH)
(SUB FOR JD9344, THIS APPLICATION) M10 X 30
3050-21 PN=69
D3 WINCH
30
DRIVES AND CLUTCHES 3050 CLUTCH PISTON (SKIDDER WINCH) TP27204
3050-22
-UN-01JAN94
THIS PARTS LISTING IS CONTINUED MODEL 40, 4000 AND 4000S WINCHES PC2295
(29-MAR-96) PN=70
D4 WINCH
30
DRIVES AND CLUTCHES 3050 CLUTCH PISTON (SKIDDER WINCH) (MODEL 40) KEY
PART NO.
1 2 3 4 5 6 7 8 9
19M8535 15H558 T54533 T54532 R33248 T120223 26H93 AT139681 T131338 T162531 R32694 AR48377 F2197R R81735 R46218 R33246 R67840 R33247 R40184 R81736 R80813 RE239058 R57621 T141680 19M7662 R57345 T148161
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
PART NAME
QTY
CAP SCREW PIPE PLUG FITTING MANIFOLD PISTON RING GEAR SHAFT KEY BALL BEARING BEARING HOUSING W/O BEARING SHIM PIN FASTENER DRUM SNAP RING PISTON SEAL SEAL DISK SPRING SNAP RING THRUST WASHER HUB CLUTCH PLATE DISK WITH INNER SPLINE CLUTCH PLATE SNAP RING CAP SCREW CLUTCH PLATE SPLINED COUPLING
MODEL 40, 4000 AND 4000S WINCHES PC2295
(16-MAR-05)
3 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 1 1 1 3 4 1 1 6 1 1
SERIAL NO.
REMARKS
M6 X 70 1/8" (OIL CLUTCH) (INPUT) 1/4" X 1-1/4" (WITH INTERNAL SUMP) (CONTAINS R32694)
(HIGH RANGE CLUTCH) ( AR94516 NO LONGER AVAILABLE) (SUB FOR R31289, THIS APPLICATION) M10 X 30
3050-23 PN=71
D5 WINCH
30
DRIVES AND CLUTCHES 3050 BRAKE ASSEMBLY (FOR MODELS 40,4000 AND 4000S WINCH ONLY) TP27205
3050-24
-UN-01JAN94
THIS PARTS LISTING IS CONTINUED MODEL 40, 4000 AND 4000S WINCHES PC2295
(15-FEB-99) PN=72
D6 WINCH
30
DRIVES AND CLUTCHES 3050 BRAKE ASSEMBLY (FOR MODEL 40, 4000 AND 4000S WINCH ONLY) KEY
PART NO.
PART NAME
QTY
1 2 3 4 5 6 7 8 9
19M7662 R47607 R26286 T84775 T84778 T84781 T84776 R46218 R72471
CAP SCREW PIPE PLUG O-RING HOUSING SPACER GASKET PISTON SEAL PLATE
9 1 1 1 6 1 1 1 2
10
R72471
PLATE
2
11 12 13
RE239058 R80813 T128648
DISK WITH INNER SPLINE CLUTCH PLATE CLUTCH PLATE
4 3 1
14 15 16 17 18
T186316 R33520 R72597 T84780 19M7662
HUB SNAP RING DISK SPRING PLATE CAP SCREW
1 1 8 1 6
MODEL 40, 4000 AND 4000S WINCHES PC2295
(08-MAR-06)
SERIAL NO.
REMARKS
M10 X 30
(DEEP SET OF SLOTS)
(DRIVE) (IN BRAKE HOUSING DEEP SET OF SLOTS, NEXT TO BRAKE PISTON) (DRIVE) (IN BRAKE HOUSING, BOTTOM OF SHORT SLOTS) ( AR94516 NO LONGER AVAILABLE) (SUB FOR (2) R72471, THIS APPLICATION) (DRIVE) (ON TOP OF BRAKE RELEASE SPACERS IN DEEP SET OF SLOTS) (SUB FOR T84777)
M10 X 30
3050-25 PN=73
D7 WINCH
30
DRIVES AND CLUTCHES 3050 BRAKE ASSEMBLY (FOR OPTIONAL MODEL 40 WINCH ONLY) TP27361
3050-26
-UN-01JAN94
THIS PARTS LISTING IS CONTINUED MODEL 40, 4000 AND 4000S WINCHES PC2295
(09-JUN-04) PN=74
D8 WINCH
30
DRIVES AND CLUTCHES 3050 BRAKE ASSEMBLY (FOR MODEL 40 WINCH ONLY) KEY
PART NO.
PART NAME
QTY
1 2 3 4 5 6 7 8 9
19M7662 R47607 R26286 T84775 T84778 T84781 T133213 R46218 R72471
CAP SCREW PIPE PLUG O-RING HOUSING SPACER GASKET PISTON SEAL PLATE
9 1 1 1 6 1 1 1 2
10
R72471
PLATE
2
11 12 13
RE239058 R80813 T128648
DISK WITH INNER SPLINE CLUTCH PLATE CLUTCH PLATE
4 3 1
14 15 16 17 18 19
T186316 R33520 R72597 T84780 19M7662 T75482
HUB SNAP RING DISK SPRING PLATE CAP SCREW SPRING
1 1 8 1 6 8
MODEL 40, 4000 AND 4000S WINCHES PC2295
(08-MAR-06)
SERIAL NO.
REMARKS
M10 X 30 (SUB FOR T133224) (DEEP SET OF SLOTS)
(DRIVE) (IN BRAKE HOUSING DEEP SET OF SLOTS, NEXT TO BRAKE PISTON) (DRIVE) (IN BRAKE HOUSING, BOTTOM OF SHORT SLOTS) ( AR94516 NO LONGER AVAILABLE) (SUB FOR (2) R72471, THIS APPLICATION) (DRIVE) (ON TOP OF BRAKE RELEASE SPACERS IN DEEP SET OF SLOTS) (SUB FOR T84777)
M10 X 30
3050-27 PN=75
D9 WINCH
30
GEARS, SHAFTS AND BEARINGS 3051 WINCH GEARS, SHAFTS AND BEARINGS (MODEL 4000S-LOW SPEED AND POWER IN/POWER OUT LOW SPEED) T165675
3051-2
-UN-03MAR03
THIS PARTS LISTING IS CONTINUED MODEL 40, 4000 AND 4000S WINCHES PC2295
(08-MAR-06) PN=76
D10 WINCH
30
GEARS, SHAFTS AND BEARINGS 3051 WINCH GEARS, SHAFTS AND BEARINGS (MODEL 4000S-LOW SPEED AND POWER IN/POWER OUT LOW KEY
PART NO.
PART NAME
QTY
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
JD9830 R33320 T84727 T84729 T84812 R33344 JD7145 L1152N M70619 A16769 T173102 JD10329 T40703 40M7044 AT48334 T121280 T15610 T173101 T190913
NEEDLE BEARING SNAP RING GEAR GEAR SHAFT SPACER BALL BEARING SNAP RING SNAP RING BUSHING GEAR BALL BEARING O-RING SNAP RING SEAL SEAL PLUG SHAFT UNIVERSAL JOINT YOKE
2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
19A 20 21 22 23
T185661 11M7017 14H534 M4259T AT186215
UNIVERSAL JOINT YOKE COTTER PIN NUT WASHER HOSE KIT
1 1 1 1 1
24 25 26 27
T173103 AT304117 24M7267 19M8334
GEAR HYDRAULIC PUMP WASHER SCREW
1 1 4 4
MODEL 40, 4000 AND 4000S WINCHES PC2295
(08-MAR-06)
SERIAL NO.
SPEED) REMARKS
(INPUT DRIVE) (INPUT LOW SPEED) (37 TEETH) (LOW SPEED IDLER) (EXTERNAL) (PUMP) (INTERNAL) (OIL) (V-RING) (INPUT SHAFT) (SUB FOR T132316) (5C WING UNIVERSAL JOINT CROSS) (ROUND UNIVERSAL JOINT CROSS) 3.200 X 32 MM 3/4" (INCLUDED WITH AT304117)(CONSISTS OF SNAP RING, LOCKING TAB, SHAFT KEY AND NUT FOR HYDRAULIC PUMP) (DRIVE) (INCLUDES AT186215) (SUB FOR AT210260) 6.400 X 11 X 1.600 MM M6 X 30
3051-3 PN=77
D11 WINCH
30
GEARS, SHAFTS AND BEARINGS 3051 WINCH GEARS, SHAFTS AND BEARINGS (MODEL 4000S-STANDARD) TP52233
3051-4
-UN-11FEB99
THIS PARTS LISTING IS CONTINUED MODEL 40, 4000 AND 4000S WINCHES PC2295
(08-MAR-06) PN=78
D12 WINCH
30
GEARS, SHAFTS AND BEARINGS 3051 WINCH GEARS, SHAFTS AND BEARINGS (MODEL 4000S-STANDARD) KEY
1 2 3 4 5 6 7 8 9 10 11 12 13
PART NO.
PART NAME
QTY
14 15 16 17
JD9830 R33320 T84727 A16769 T173102 JD10329 T40703 40M7044 AT48334 T121280 T15610 T173101 T190913 T185661 11M7017 14H534 M4259T AT186215
NEEDLE BEARING SNAP RING GEAR BUSHING GEAR BALL BEARING O-RING SNAP RING SEAL SEAL PLUG SHAFT UNIVERSAL JOINT YOKE UNIVERSAL JOINT YOKE COTTER PIN NUT WASHER KIT
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
18 19 20 21
T173103 AT304117 24M7267 19M8334
GEAR HYDRAULIC PUMP WASHER SCREW
1 1 4 4
MODEL 40, 4000 AND 4000S WINCHES PC2295
(08-MAR-06)
SERIAL NO.
REMARKS
(INPUT DRIVE) (PUMP) (INTERNAL) (OIL) (V-RING) (INPUT) (SUB FOR T132316) (YOKE) (ROUND STYLE) (NOT ILLUSTRATED)(SQUARE STYLE) 3.200 X 32 MM 3/4" (INCLUDED WITH AT304117)(CONSISTS OF SNAP RING, LOCKING TAB, SHAFT KEY AND NUT FOR HYDRAULIC PUMP) (DRIVE) (SUB FOR AT210260) (INCLUDES AT186215) 6.400 X 11 X 1.600 MM M6 X 30
3051-5 PN=79
D13 WINCH
30
HYDRAULIC SYSTEMS 3060 INTERNAL LINE (STANDARD WINCHES) TP27207
3060-2
-UN-01JAN94
THIS PARTS LISTING IS CONTINUED MODEL 40, 4000 AND 4000S WINCHES PC2295
(24-MAR-94) PN=80
D14 WINCH
30
HYDRAULIC SYSTEMS 3060 INTERNAL LINES (STANDARD WINCHES) KEY
1 2 3 4 5 6
PART NO.
R26375 R33138 M1206T T77858 AT87481 R41465
PART NAME
QTY
O-RING FITTING PLUG O-RING OIL TUBE CLAMP
MODEL 40, 4000 AND 4000S WINCHES PC2295
2 2 1 1 1 1
(15-APR-93)
SERIAL NO.
REMARKS
(SUB FOR R39112, THIS APPLICATION) (STANDPIPE)
3060-3 PN=81
D15 WINCH
30
HYDRAULIC SYSTEMS 3060 INTERNAL LINES (POWER IN /POWER OUT WINCHES) TP27357
3060-4
-UN-01JAN94
THIS PARTS LISTING IS CONTINUED MODEL 40, 4000 AND 4000S WINCHES PC2295
(25-APR-90) PN=82
D16 WINCH
30
HYDRAULIC SYSTEMS 3060 INTERNAL LINES (POWER IN/POWER OUT WINCHES) KEY
1 2 3 4 5 6 7 8 9 10 11 12
PART NO.
38H1286 T77932 AT141060 R26375 38H1317 AT141059 R29463 R31674 AT141058 T77858 AT87481 R41465
PART NAME
QTY
ADAPTER FITTING O-RING TUBE O-RING FITTING TUBE O-RING O-RING TUBE O-RING OIL TUBE CLAMP
MODEL 40, 4000 AND 4000S WINCHES PC2295
1 5 1 4 4 1 1 1 1 1 1 2
(10-OCT-90)
SERIAL NO.
REMARKS
(SHIFT PISTON RETURN) (FORWARD SHIFT PISTON) (SHIFT PISTON REVERSE) (STANDPIPE)
3060-5 PN=83
D17 WINCH
30
HYDRAULIC SYSTEMS 3060 HYDRAULIC FITTINGS FOR OUTSIDE OF WINCH HOUSING (POWER-IN/POWER-OUT ONLY) (MODEL 4000 WINCH) TP27358
3060-5A
-UN-01JAN94
THIS PARTS LISTING IS CONTINUED MODEL 40, 4000 AND 4000S WINCHES PC2295
(15-FEB-99) PN=84
D18 WINCH
30
HYDRAULIC SYSTEMS 3060 HYDRAULIC FITTINGS FOR OUTSIDE OF WINCH HOUSING (POWER-IN/POWER-OUT ONLY) (MODEL 4000 WINCH) KEY
1 2 3 4 5 6 7 8
PART NO.
38H1096 T77932 38H1286 R31674 R26375 38H1161 T77857 38H1213
PART NAME
QTY
ELBOW FITTING O-RING ADAPTER FITTING O-RING O-RING ADAPTER FITTING O-RING ADAPTER FITTING
MODEL 40, 4000 AND 4000S WINCHES PC2295
SERIAL NO.
REMARKS
1 2 1 1 2 1 2 1
(15-FEB-99)
3060-5B PN=85
D19 WINCH
30
HYDRAULIC SYSTEMS 3060 PLUGS FOR POWER IN/POWER OUT PORTS (STANDARD WINCHES) (NOT INCLUDING "E" SERIES SKIDDERS) TP67717
3060-6
-UN-05APR00
THIS PARTS LISTING IS CONTINUED MODEL 40, 4000 AND 4000S WINCHES PC2295
(01-MAY-00) PN=86
D20 WINCH
30
HYDRAULIC SYSTEMS 3060 PLUGS FOR POWER IN/POWER OUT PORTS (STANDARD WINCHES) (NOT INCLUDING "E" SERIES SKIDDERS) KEY
PART NO.
1
R33138
2 3
R26375 H63289 R31674 T77932 38H1275 ..................
4 5 6
T77857 T77932 38H1416 38H1417
PART NAME
QTY
FITTING
2
O-RING O-RING O-RING O-RING ADAPTER FITTING ADAPTER FITTING
2 1 1 1 1 1
O-RING O-RING FITTING FITTING
1 1 1 1
MODEL 40, 4000 AND 4000S WINCHES PC2295
(09-JUN-04)
SERIAL NO.
REMARKS
(SUB FOR R39112, THIS APPLICATION) (LOWER PORT POWER-IN/POWER-OUT) -000243 000244-000243 000244-000243 000244-000243 000244-
(ON UNITS BUILT BEFORE MARCH 2004) (ON UNITS BUILT AFTER MARCH 2004) (SUB R45438) (ALSO ORDER R56463) (SUB FOR 38H1286, THIS APPLICATION) (ON UNITS BUILT BEFORE MARCH 2004) (ON UNITS BUILT BEFORE MARCH 2004)
3060-7 PN=87
D21 WINCH
30
HYDRAULIC SYSTEMS 3060 PLUGS FOR POWER IN/POWER OUT PORTS ("E" SERIES SKIDDERS) TP54362
3060-7A
-UN-19JAN99
THIS PARTS LISTING IS CONTINUED MODEL 40, 4000 AND 4000S WINCHES PC2295
(15-FEB-99) PN=88
D22 WINCH
30
HYDRAULIC SYSTEMS 3060 PLUGS FOR POWER IN/POWER OUT PORTS ("E" SERIES SKIDDER) KEY
1 2 3
PART NO.
4
R33138 R26375 R31674 T77932 ..................
5 6 7 8 9 10
T77932 38H1417 38H1161 T77857 AT185319 38H1416
PART NAME
QTY
FITTING O-RING O-RING O-RING ADAPTER FITTING
1 2 1 1 1
O-RING FITTING ADAPTER FITTING O-RING HYDRAULIC HOSE - FABRICATE FITTING
1 1 1 2 1 1
MODEL 40, 4000 AND 4000S WINCHES PC2295
(09-JUN-04)
SERIAL NO.
REMARKS
(SUB FOR R39112, THIS APPLICATION) (ON UNITS BUILT BEFORE MARCH 2004) (ON UNITS BUILT AFTER MARCH 2004) (SUB R45438) (ALSO ORDER R56463) (SUB FOR 38H1286, THIS APPLICATION) (ON UNITS BUILT BEFORE MARCH 2004) (ON UNITS BUILT BEFORE MARCH 2004) 13/16" X 711 MM (28") X 13/16"
3060-7B PN=89
D23 WINCH
30
HYDRAULIC SYSTEMS 3060 OIL PASSAGE PLUGS TP28653
3060-8
-UN-01JAN94
THIS PARTS LISTING IS CONTINUED MODEL 40, 4000 AND 4000S WINCHES PC2295
(22-MAY-91) PN=90
D24 WINCH
30
HYDRAULIC SYSTEMS 3060 OIL PASSAGE PLUGS KEY
PART NO.
1 2 3 4
X4HP5ON-S R28782 R26375 R33138
PART NAME
QTY
FITTING PLUG O-RING O-RING FITTING
MODEL 40, 4000 AND 4000S WINCHES PC2295
2 2 3 3
(08-MAR-06)
SERIAL NO.
REMARKS
(SUB FOR X05HP-4, AN122518)
3060-9 PN=91
E1 WINCH
30
HYDRAULIC SYSTEMS 3060 CONTROL VALVE (STANDARD WINCHES - CRAWLERS ONLY) TP28645
3060-10
-UN-01JAN94
THIS PARTS LISTING IS CONTINUED MODEL 40, 4000 AND 4000S WINCHES PC2295
(22-MAY-91) PN=92
E2 WINCH
30
HYDRAULIC SYSTEMS 3060 CONTROL VALVE (STANDARD WINCHES - CRAWLERS ONLY) KEY
1 2 3 4 5 6 7 8 9 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26 27 28 29
PART NO.
PART NAME
QTY
R394R R28776 T84851 T212838 R26375 38H1095 T77857 R27218 R26448 15H558 T48805 T43645 R459R 19M7550
O-RING O-RING TUBE GASKET O-RING ELBOW FITTING O-RING FITTING PLUG O-RING PIPE PLUG VALVE SPOOL SPRING O-RING CAP SCREW
1 1 1 1 1 1 2 1 1 1 1 1 1 2
19M7550
CAP SCREW
1
19M7742
CAP SCREW
1
19M8081 R47607 R26286 T43645 M3048T R26906 T58477 T84800 R26552 T44784 R44648 15H558 38H1161 R26375 R33138
CAP SCREW PIPE PLUG O-RING SPRING SHIM O-RING FITTING HOUSING BALL SPRING FITTING PIPE PLUG ADAPTER FITTING O-RING FITTING
MODEL 40, 4000 AND 4000S WINCHES PC2295
3 1 1 1 AR 1 1 1 1 1 1 1 1 1 1
(16-MAR-05)
SERIAL NO.
REMARKS
(CLUTCH OIL MANIFOLD) (SUB FOR T84829 AND T141059)
1/8", (SPOOL)
M10 X 35, (FOR WINCH ON "D" SERIES SKIDDERS ONLY) M10 X 35, (FOR WINCH ON "E" SERIES SKIDDERS ONLY) (TOP RIGHT MOUNTING HOLE ON VALVE) M10 X 65, (FOR WINCH ON "E" SERIES SKIDDERS ONLY) (TOP LEFT MOUNTING HOLE ON VALVE) M10 X 80
(.024 INCHES) (SUB FOR R27474, THIS APPLICATION) (DETENT) 1/8" (SUB FOR R39112, THIS APPLICATION)
3060-11 PN=93
E3 WINCH
30
HYDRAULIC SYSTEMS 3060 CONTROL VALVE (CRAWLER DOZER POWER IN/POWER OUT WINCH) (SKIDDER STANDARD WINCH - NOT FOR "E SERIES) TP51819
3060-12
-UN-19JAN96
THIS PARTS LISTING IS CONTINUED MODEL 40, 4000 AND 4000S WINCHES PC2295
(29-MAR-96) PN=94
E4 WINCH
30
HYDRAULIC SYSTEMS 3060 CONTROL VALVE (CRAWLER DOZER POWER IN/POWER OUT WINCH) (SKIDDER STANDARD WINCH - NOT FOR "E" SERIES) KEY
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28
PART NO.
R394R R28776 T84851 T212838 R26375 38H1405 T77932 R27218 R26448 15H558 T48805 T43645 R459R 19M7550 19M8081 R47607 R26286 T43645 M3048T R26906 T58477 T84800 R26552 T44784 R44648 15H558 R26375 R33138
PART NAME
QTY
O-RING O-RING TUBE GASKET O-RING ELBOW FITTING O-RING FITTING PLUG O-RING PIPE PLUG VALVE SPOOL SPRING O-RING CAP SCREW CAP SCREW PIPE PLUG O-RING SPRING SHIM O-RING FITTING HOUSING BALL SPRING FITTING PIPE PLUG O-RING FITTING
1 1 1 1 1 1 1 1 1 1 1 1 1 2 3 1 1 1 AR 1 1 1 1 1 1 1 1 1
MODEL 40, 4000 AND 4000S WINCHES PC2295
(16-MAR-05)
SERIAL NO.
REMARKS
(CLUTCH OIL MANIFOLD) (SUB FOR T84829 AND T141059)
1/8", (SPOOL)
M10 X 35 M10 X 80
(.024 INCHES) (SUB FOR R27474, THIS APPLICATION) (DETENT) 1/8" (SUB FOR R39112, THIS APPLICATION)
3060-13 PN=95
E5 WINCH
30
HYDRAULIC SYSTEMS 3060 CONTROL VALVE (LOADER POWER IN/POWER OUT WINCH - CRAWLERS ONLY) TP28644
3060-13A
-UN-01JAN94
THIS PARTS LISTING IS CONTINUED MODEL 40, 4000 AND 4000S WINCHES PC2295
(22-MAY-91) PN=96
E6 WINCH
30
HYDRAULIC SYSTEMS 3060 CONTROL VALVE (LOADER POWER IN/POWER OUT WINCH - CRAWLERS ONLY) KEY
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29
PART NO.
R394R R28776 T84851 T212838 R26375 38H1096 T77932 R27218 R26448 15H558 T48805 T43645 R459R 19M7550 19M8081 R47607 R26286 T43645 M3048T R26906 T58477 T84800 R26552 T44784 R44648 15H558 38H1317 R26375 R33138
PART NAME
QTY
O-RING O-RING TUBE GASKET O-RING ELBOW FITTING O-RING FITTING PLUG O-RING PIPE PLUG VALVE SPOOL SPRING O-RING CAP SCREW CAP SCREW PIPE PLUG O-RING SPRING SHIM O-RING FITTING HOUSING BALL SPRING FITTING PIPE PLUG FITTING O-RING FITTING
1 1 1 1 1 1 2 1 1 1 1 1 1 2 3 1 1 1 AR 1 1 1 1 1 1 1 1 1 1
MODEL 40, 4000 AND 4000S WINCHES PC2295
(16-MAR-05)
SERIAL NO.
REMARKS
(CLUTCH OIL MANIFOLD) (SUB FOR T84829 AND T141059)
1/8", (SPOOL)
M10 X 35 M10 X 80
(.024 INCHES) (SUB FOR R27474, THIS APPLICATION) (DETENT) 1/8" (SUB FOR R39112, THIS APPLICATION)
3060-13B PN=97
E7 WINCH
30
HYDRAULIC SYSTEMS 3060 CONTROL VALVE (SKIDDER STANDARD WINCH - "E SERIES) TP51820
3060-13C
-UN-19JAN96
THIS PARTS LISTING IS CONTINUED MODEL 40, 4000 AND 4000S WINCHES PC2295
(29-MAR-96) PN=98
E8 WINCH
30
HYDRAULIC SYSTEMS 3060 CONTROL VALVE (SKIDDER STANDARD WINCH - "E" SERIES) KEY
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28
PART NO.
R394R R28776 T84851 T212838 R26375 R33138 T77857 R27218 R26448 15H558 T48805 T43645 R459R 19M7550 19M8081 R47607 R26286 T43645 M3048T R26906 T58477 T84800 R26552 T44784 R44648 15H558 R26375 38H1005
PART NAME
QTY
O-RING O-RING TUBE GASKET O-RING FITTING O-RING FITTING PLUG O-RING PIPE PLUG VALVE SPOOL SPRING O-RING CAP SCREW CAP SCREW PIPE PLUG O-RING SPRING SHIM O-RING FITTING HOUSING BALL SPRING FITTING PIPE PLUG O-RING ELBOW FITTING
1 1 1 1 1 1 1 1 1 1 1 1 1 2 3 1 1 1 AR 1 1 1 1 1 1 1 1 1
MODEL 40, 4000 AND 4000S WINCHES PC2295
(16-MAR-05)
SERIAL NO.
REMARKS
(CLUTCH OIL MANIFOLD) (SUB FOR T84829 AND T141059)
1/8", (SPOOL)
M10 X 35 M10 X 80
(.024 INCHES) (SUB FOR R27474, THIS APPLICATION) (DETENT) 1/8"
3060-13D PN=99
E9 WINCH
30
HYDRAULIC SYSTEMS 3060 WINCH EXTERNAL LINES (MODEL 4000S) TP52239
3060-18
-UN-12FEB99
THIS PARTS LISTING IS CONTINUED MODEL 40, 4000 AND 4000S WINCHES PC2295
(01-MAY-00) PN=100
E10 WINCH
30
HYDRAULIC SYSTEMS 3060 WINCH EXTERNAL LINES (MODEL 4000S) KEY
PART NO.
PART NAME
QTY
1 2 3 4 5 6 7 8 9
T77932 38H1286 T77932 AT183415 T77857 38H1095 38H1161 R26375 AT182374
O-RING ADAPTER FITTING O-RING HYDRAULIC HOSE - FABRICATE O-RING ELBOW FITTING ADAPTER FITTING O-RING HYDRAULIC HOSE - FABRICATE
1 1 2 1 9 1 3 9 2
10 11
T163149 AT182373
FITTING HYDRAULIC HOSE - FABRICATE
2 2
12 13 14
38H1005 AT87429 38H1405
ELBOW FITTING SPOOL VALVE ELBOW FITTING
5 1 1
MODEL 40, 4000 AND 4000S WINCHES PC2295
(01-MAY-00)
SERIAL NO.
REMARKS
(DRAIN POWER IN POWER OUT VALVE "OUT" PORT TO LOWER FRONT COVER PORT) (SUPPLY POWER IN POWER OUT VALVE "IN" PORT TO RIGHT PORT ON FRONT COVER) (STANDARD SPEED POWER-IN/POWER-OUT WINCH FROM LOWER PORT ON WINCH TO "A" PORT ON POWER-IN/POWER-OUT VALVE)(LOW SPEED POWER-IN/ POWER-OUT WINCH-FROM LOWER PORT ON WINCH TO "B" PORT ON POWER-IN/POWER-OUT VALVE) (STANDARD SPEED POWER-IN/POWER-OUT WINCH- FROM UPPER PORT ON WINCH TO "B" PORT ON POWER -IN/POWER-OUT VALVE) (LOW SPEED POWER-IN/ POWER-OUT WINCH-FROM UPPER PORT ON WINCH TO "A" PORT ON POWER-IN/POWER-OUT VALVE) (POWER-IN/POWER-OUT VALVE)
3060-19
PN=101
E11 WINCH
30
HYDRAULIC SYSTEMS 3060 WINCH EXTERNAL LINES WITH ACCUMALATOR (MODEL 4000S) TP67696
3060-19A
-UN-27APR00
THIS PARTS LISTING IS CONTINUED MODEL 40, 4000 AND 4000S WINCHES PC2295
(11-JUL-00) PN=102
E12 WINCH
30
HYDRAULIC SYSTEMS 3060 WINCH EXTERNAL LINES WITH ACCUMALATOR (MODEL 4000S) KEY
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
PART NO.
PART NAME
QTY
38H1031 AT211003 R32549 AT183415 T77857 38H1095 38H1161 R26375 AT182374 T163149 AT182373 38H1005 AT87429 AT125337 AR96877 B3690R R60170 14M7517 24M7239 F1451R 19M7550 AA22513 R30815 AT222476
TEE FITTING PRESSURE SWITCH ADAPTER FITTING HYDRAULIC HOSE - FABRICATE O-RING ELBOW FITTING ADAPTER FITTING O-RING HYDRAULIC HOSE - FABRICATE FITTING HYDRAULIC HOSE - FABRICATE ELBOW FITTING SPOOL VALVE HYDRAULIC ACCUMULATOR CAP O-RING VALVE LOCK NUT WASHER CLAMP CAP SCREW TEE FITTING FITTING WIRE
1 1 1 1 12 1 3 12 2 2 2 4 1 1 1 1 1 2 4 2 2 1 1 1
AT223666
WIRING HARNESS
1
MODEL 40, 4000 AND 4000S WINCHES PC2295
(11-JUL-00)
SERIAL NO.
REMARKS
(POWER-IN/POWER-OUT VALVE) (INCLUDES AR96877, B3690R AND R60170) (NOT ILLUSTRATED) (NOT ILLUSTRATED) (NOT ILLUSTRATED) M10 10.700 X 21 X 2.500 MM M10 X 35 (NOT ILLUSTRATED) (BETWEEN SWITCH AND TRACTOR HARNESS TERMINAL) (700H) (NOT ILLUSTRATED) (BETWEEN SWITCH AND TRACTOR HARNESS TERMINAL)
3060-19B
PN=103
E13 WINCH
30
HYDRAULIC SYSTEMS 3060 WINCH EXTERNAL LINES POWER IN/POWER OUT (MODEL 4000S) T145283
3060-19C
-UN-07SEP01
THIS PARTS LISTING IS CONTINUED MODEL 40, 4000 AND 4000S WINCHES PC2295
(27-SEP-01) PN=104
E14 WINCH
30
HYDRAULIC SYSTEMS 3060 WINCH EXTERNAL LINES POWER IN/POWER OUT (MODEL 4000S) KEY
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 25
PART NO.
T77932 AT87429 38H1005 T77857 38H1031 AT222106 AT125337 14M7517 24M7239 F1451R 19M7550 AA22513 R26375 R30815 AT222107 AT222477 T163149 AT222135 38H1161 38H1095 38H1286 AT183415 38H1046 R32549
PART NAME
QTY
O-RING SPOOL VALVE ELBOW FITTING O-RING TEE FITTING HYDRAULIC HOSE - FABRICATE HYDRAULIC ACCUMULATOR LOCK NUT WASHER CLAMP CAP SCREW TEE FITTING O-RING FITTING HYDRAULIC HOSE - FABRICATE HYDRAULIC HOSE - FABRICATE FITTING HYDRAULIC HOSE - FABRICATE ADAPTER FITTING ELBOW FITTING ADAPTER FITTING HYDRAULIC HOSE - FABRICATE ELBOW FITTING ADAPTER FITTING
MODEL 40, 4000 AND 4000S WINCHES PC2295
(27-SEP-01)
3 1 1 8 1 1 1 2 4 2 2 1 8 1 3 1 2 1 1 1 1 1 1 1
SERIAL NO.
REMARKS
M10 10.700 X 21 X 2.500 MM M10 X 35
3060-19D
PN=105
E15 WINCH
30
LINES, HOSES AND FITTINGS 3063 WINCH HYDRAULIC LINES STANDARD AND POWER-IN POWER-OUT (MODEL 4000S) TP52238
3063-2
-UN-11FEB99
THIS PARTS LISTING IS CONTINUED MODEL 40, 4000 AND 4000S WINCHES PC2295
(01-MAY-00) PN=106
E16 WINCH
30
LINES, HOSES AND FITTINGS 3063 WINCH HYDRAULIC LINES STANDARD AND POWER-IN/POWER-OUT (MODEL 4000S) KEY
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
PART NO.
PART NAME
QTY
R26375 38H1161 T77857 T165723 TY22464 38H1005 AT184698 .................. T13119 AT184856 AT184857 15H685 38H1314 AT210367 R394R
O-RING ADAPTER FITTING O-RING TEE FITTING CLAMP ELBOW FITTING OIL LINE HOSE O-RING TUBE FITTING PIPE PLUG ELBOW FITTING TUBE O-RING
11 1 2 1 2 1 1 1 1 1 1 1 1 1 1
R26448 T176191 AT211003
O-RING ADAPTER FITTING PRESSURE SWITCH
5 1 1
MODEL 40, 4000 AND 4000S WINCHES PC2295
(09-JUN-04)
SERIAL NO.
REMARKS
(SUB FOR AR21836) (MAKE FROM M87571, CUT TO LENGTH)
(NOT ILLUSTRATED) (BETWEEN WINCH COVER HOUSING AND AT210367 TUBE) (WINCH HYDRAULIC)
3063-3
PN=107
E17 WINCH
30
LINES, HOSES AND FITTINGS 3063 WINCH HYDRAULIC LINES STANDARD AND POWER-IN POWER-OUT (MODEL 4000S) (WITH ACCUMALATOR) TP67695
3063-4
-UN-24FEB00
THIS PARTS LISTING IS CONTINUED MODEL 40, 4000 AND 4000S WINCHES PC2295
(01-MAY-00) PN=108
E18 WINCH
30
LINES, HOSES AND FITTINGS 3063 WINCH HYDRAULIC LINES STANDARD AND POWER-IN/POWER-OUT (MODEL 4000S) (WITH ACCUMALATOR) KEY
1 2 3 4 5 6 7 8 9 10 11 12 13 14
PART NO.
PART NAME
QTY
R26375 38H1161 T77857 T165723 TY22464 38H1005 AT184698 .................. T13119 AT184856 AT184857 .................. 38H1314 AT210367 R394R
O-RING ADAPTER FITTING O-RING TEE FITTING CLAMP ELBOW FITTING OIL LINE HOSE O-RING TUBE FITTING ACCUMULATOR ELBOW FITTING TUBE O-RING
11 1 2 1 2 1 1 1 1 1 1 1 1 1 1
15 16 17
R26448 N133783 AT307777
O-RING ADAPTER FITTING PRESSURE SWITCH
5 1 1
18
..................
TEE FITTING
1
MODEL 40, 4000 AND 4000S WINCHES PC2295
(09-JUN-04)
SERIAL NO.
REMARKS
(SUB FOR AR21836) (MAKE FROM M87571, CUT TO LENGTH)
(SUB AT307777) (NOT ILLUSTRATED) (BETWEEN WINCH COVER HOUSING AND AT210367) (SUB FOR AT211003 AND AT223696) (WINCH HYDRAULIC) (SUB AT307777)
3063-5
PN=109
E19 WINCH
30
HYDRAULIC RESERVOIR 3064 WINCH EXTERNAL RESERVOIR (MODEL 4000S) TP52229
3064-2
-UN-12FEB99
THIS PARTS LISTING IS CONTINUED MODEL 40, 4000 AND 4000S WINCHES PC2295
(15-FEB-99) PN=110
E20 WINCH
30
HYDRAULIC RESERVOIR 3064 WINCH EXTERNAL RESERVOIR (MODEL 4000S) KEY
1 2 3 4 5 6 7 8 9 10 11
PART NO.
AT326522 AT184790 T77858 AT184528 R26375 R33138 T165179 T165178 14M7296 19M7402 T165121
PART NAME
QTY
DIPSTICK DIPSTICK TUBE O-RING RESERVOIR O-RING FITTING GASKET PLATE FLANGE NUT CAP SCREW GASKET
MODEL 40, 4000 AND 4000S WINCHES PC2295
1 1 1 1 1 1 1 1 6 6 1
(08-MAR-06)
SERIAL NO.
REMARKS
(SUB FOR AT184789) (ALSO ORDER T165179)
M10 M10 X 25
3064-3
PN=111
WINCH
30
HYDRAULIC RESERVOIR 3064 MEMORANDA
3064-4
MODEL 40, 4000 AND 4000S WINCHES PC2295
(15-FEB-99) PN=112
L21 MODEL 40, 4000 AND 4000S WINCHES NUMERICAL INDEX PART NO.
GRID
KEY
PAGE
AA22513 AA22513 AH138519 AH138519 AH138519 AH138519 AH138519 AN122518 AP17808 AP17808 AR21836 AR21836 AR21836 AR21836 AR48377 AR48377 AR94516 AR94516 AR94516 AR94516 AR96877 AR96877 AT101565 AT101565 AT105020 AT105020 AT112928 AT112928 AT12431 AT12431 AT12431 AT125337 AT125337 AT128907 AT13161 AT139629 AT139681 AT139681 AT139682 AT139702 AT139745 AT139745 AT139746 AT139746 AT139761 AT139771 AT139771 AT139773 AT139774 AT139775 AT139844 AT139866 AT139867 AT141058 AT141059 AT141060 AT141929 AT142051 AT142051 AT142051 AT145062 AT145062 AT147864 AT147864 AT151025 AT151125 AT157171
E12 E14 A16 A16 A18 A20 A22 D24 A18 A20 B20 B24 E16 E18 D2 D4 D2 D4 D6 D8 E12 E12 B20 B24 B20 B24 A18 A20 C4 C6 C8 E12 E14 A16 C12 C20 D2 D4 C24 A22 A18 A20 A18 A20 A22 A18 A20 C2 C2 C2 C2 A22 A22 D16 D16 D16 B14 C16 C18 C24 A16 A16 A16 A16 B6 B6 C20
22 12 10 42 10 10 13 1 1 1 2 28 5 5 11 11 20 21 11 11 14 15 4 29 39A 3 8 8 1 1 1 14 7 9 10 9 8 8 10 12 4 4 17 17 15 11 11 10 4 9 13 21 21 9 6 3 2 6 14 9 23 27 23 27 14 14 4
3060 - 19B 3060 - 19D 3015 - 3 3015 - 3 3015 - 5 3015 - 7 3015 - 9 3060 - 9 3015 - 5 3015 - 7 3042 - 3 3042 - 7 3063 - 3 3063 - 5 3050 - 21 3050 - 23 3050 - 21 3050 - 23 3050 - 25 3050 - 27 3060 - 19B 3060 - 19B 3042 - 3 3042 - 7 3042 - 3 3042 - 7 3015 - 5 3015 - 7 3050 - 3 3050 - 5 3050 - 7 3060 - 19B 3060 - 19D 3015 - 3 3050 - 9B 3050 - 15 3050 - 21 3050 - 23 3050 - 19 3015 - 9 3015 - 5 3015 - 7 3015 - 5 3015 - 7 3015 - 9 3015 - 5 3015 - 7 3045 - 3 3045 - 3 3045 - 3 3045 - 3 3015 - 9 3015 - 9 3060 - 5 3060 - 5 3060 - 5 3041 - 11 3050 - 11 3050 - 13 3050 - 19 3015 - 3 3015 - 3 3015 - 3 3015 - 3 3041 - 3 3041 - 3 3050 - 15
MODEL 40, 4000 AND 4000S WINCHES PC2295
PART NO.
GRID
KEY
PAGE
AT167551 AT173348 AT175528 AT175529 AT179561 AT181161 AT181675 AT181675 AT181675 AT182296 AT182299 AT182299 AT182317 AT182373 AT182373 AT182374 AT182374 AT183415 AT183415 AT183415 AT183546 AT184151 AT184152 AT184528 AT184698 AT184698 AT184773 AT184774 AT184789 AT184790 AT184856 AT184856 AT184857 AT184857 AT185319 AT185430 AT185431 AT186200 AT186201 AT186214 AT186215 AT186215 AT186380 AT186381 AT186643 AT186646 AT188450 AT191329 AT191330 AT191818 AT191819 AT191819 AT191821 AT192333 AT207530 AT207530 AT209110 AT209110 AT209110 AT210259 AT210260 AT210260 AT210367 AT210367 AT210626 AT210885 AT210885
A16 C20 C2 C2 A16 A16 B6 B6 C20 A24 A18 A20 A24 E10 E12 E10 E12 E10 E12 E14 B20 B20 B20 E20 E16 E18 B20 B22 E20 E20 E16 E18 E16 E18 D22 B20 B20 B18 B18 B20 D10 D12 B2 B2 B2 B2 B18 B22 B20 B24 B20 B20 B24 B2 B20 B20 B20 B22 B24 B18 D10 D12 E16 E18 A24 A24 B2
37 4 10 13 27 27 14 22 9 1 11 11 1 11 11 9 9 4 4 22 5 27 35 4 7 7 31 4 1 2 10 10 11 11 9 24 23 15 12 11 23 17 10 16 1 1 14 4 31 11 8 8A 3 17 8 8A 40 5 21 14 25 19 14 14 15 16 18
3015 - 3 3050 - 15 3045 - 3 3045 - 3 3015 - 3 3015 - 3 3041 - 3 3041 - 3 3050 - 15 3015 - 11 3015 - 5 3015 - 7 3015 - 11 3060 - 19 3060 - 19B 3060 - 19 3060 - 19B 3060 - 19 3060 - 19B 3060 - 19D 3042 - 3 3042 - 3 3042 - 3 3064 - 3 3063 - 3 3063 - 5 3042 - 3 3042 - 5 3064 - 3 3064 - 3 3063 - 3 3063 - 5 3063 - 3 3063 - 5 3060 - 7B 3042 - 3 3042 - 3 3041 - 15 3041 - 15 3042 - 3 3051 - 3 3051 - 5 3015 - 13 3015 - 13 3015 - 13 3015 - 13 3041 - 15 3042 - 5 3042 - 3 3042 - 7 3042 - 3 3042 - 3 3042 - 7 3015 - 13 3042 - 3 3042 - 3 3042 - 3 3042 - 5 3042 - 7 3041 - 15 3051 - 3 3051 - 5 3063 - 3 3063 - 5 3015 - 11 3015 - 11 3015 - 13
(08-MAR-06)
PART NO.
GRID
KEY
AT210991 AT211002 AT211003 AT211003 AT211003 AT219961 AT221941 AT221944 AT221944 AT222106 AT222107 AT222133 AT222134 AT222135 AT222136 AT222137 AT222476 AT222477 AT223666 AT223696 AT228722 AT304117 AT304117 AT307653 AT307653 AT307653 AT307777 AT307777 AT307777 AT312566 AT326522 AT46597 AT48334 AT48334 AT48334 AT48334 AT48548 AT48548 AT48548 AT65619 AT87319 AT87409 AT87429 AT87429 AT87429 AT87429 AT87481 AT87481 AT87504 AU13137 AU13137 A16769 A16769 A16769 B11030 B3690R B3690R E69975 E69975 F1451R F1451R F2197R F2197R F2197R F2863R H63289 H64810
A24 B18 E12 E16 E18 B18 B24 A18 A20 E14 E14 B24 B24 E14 B24 B24 E12 E14 E12 E18 B24 D10 D12 C6 C6 C22 E18 E18 E18 B24 E20 A20 C10 C14 D10 D12 A16 A18 A20 A16 B6 D2 A20 E10 E12 E14 D14 D16 B12 C10 C14 C18 D10 D12 C18 E12 E12 B20 B24 E12 E14 D2 D2 D4 C8 D20 B10
17 13 2 17 17 11 33 11 11 6 15 14 22 18 20 26 24 16 24 17 32 25 19 7 9 9 12 17 18 32 1 21 8 8 15 9 36 7 7 38 14 23 22 13 13 2 5 11 7 3 3 17 10 4 15 14 16 3 30 20 10 12 27 12 17 3 2
PAGE
3015 - 11 3041 - 15 3060 - 19B 3063 - 3 3063 - 5 3041 - 15 3042 - 7 3015 - 5 3015 - 7 3060 - 19D 3060 - 19D 3042 - 7 3042 - 7 3060 - 19D 3042 - 7 3042 - 7 3060 - 19B 3060 - 19D 3060 - 19B 3063 - 5 3042 - 7 3051 - 3 3051 - 5 3050 - 5 3050 - 5 3050 - 17 3063 - 5 3063 - 5 3063 - 5 3042 - 7 3064 - 3 3015 - 7 3050 - 9 3050 - 9D 3051 - 3 3051 - 5 3015 - 3 3015 - 5 3015 - 7 3015 - 3 3041 - 3 3050 - 21 3015 - 7 3060 - 19 3060 - 19B 3060 - 19D 3060 - 3 3060 - 5 3041 - 9 3050 - 9 3050 - 9D 3050 - 13 3051 - 3 3051 - 5 3050 - 13 3060 - 19B 3060 - 19B 3042 - 3 3042 - 7 3060 - 19B 3060 - 19D 3050 - 21 3050 - 21 3050 - 23 3050 - 7 3060 - 7 3041 - 7 II-1
PN=113
L22 MODEL 40, 4000 AND 4000S WINCHES NUMERICAL INDEX - CONTINUED PART NO.
GRID
KEY
H76869 H76869 H858R H86839 H86839 H96149 JD10329 JD10329 JD10329 JD10329 JD10329 JD10329 JD7145 JD7145 JD7418 JD7418 JD7418 JD7418 JD7759 JD8129 JD8129 JD8129 JD8129 JD8129 JD8129 JD8159 JD8210 JD8245 JD8346 JD8652 JD8855 JD8855 JD8865 JD8865 JD8865 JD8915 JD8952 JD8969 JD9172 JD9344 JD9344 JD9344 JD9344 JD9830 JD9830 JD9830 JD9830 J13155 L1152N L1152N L1152N L299T L299T L299T L3483N L3483N L4388T M1206T M3048T M3048T M3048T M3048T M41029 M41029 M41029 M41029 M4259T
A24 B2 A16 C8 C8 C16 C16 C18 C24 D2 D10 D12 C18 D10 C4 C6 C8 C12 C2 C4 C4 C6 C6 C8 C8 C22 C22 C20 C24 C24 C16 C18 C10 C12 C14 C20 C12 C12 C12 C16 C18 C24 D2 C16 C18 D10 D12 C10 C16 C18 D10 A16 A18 A20 A24 B2 C10 D14 E2 E4 E6 E8 B20 B24 B24 B24 C10
18 20 1 17 19 5 6 14 9 28 12 6 6 7 4 4 4 7 5 5 12 5 9 5 13 6 5 6 2 1 1 18 1 1 1 5 4 6 3 6 14 9 28 1 18 1 1 12 7 7 8 2 13 24 19 21 10 3 19 19 19 19 10 9 10 11 10
II-2
PAGE
3015 - 11 3015 - 13 3015 - 3 3050 - 7 3050 - 7 3050 - 11 3050 - 11 3050 - 13 3050 - 19 3050 - 21 3051 - 3 3051 - 5 3050 - 13 3051 - 3 3050 - 3 3050 - 5 3050 - 7 3050 - 9B 3045 - 3 3050 - 3 3050 - 3 3050 - 5 3050 - 5 3050 - 7 3050 - 7 3050 - 17 3050 - 17 3050 - 15 3050 - 19 3050 - 19 3050 - 11 3050 - 13 3050 - 9 3050 - 9B 3050 - 9D 3050 - 15 3050 - 9B 3050 - 9B 3050 - 9B 3050 - 11 3050 - 13 3050 - 19 3050 - 21 3050 - 11 3050 - 13 3051 - 3 3051 - 5 3050 - 9 3050 - 11 3050 - 13 3051 - 3 3015 - 3 3015 - 5 3015 - 7 3015 - 11 3015 - 13 3050 - 9 3060 - 3 3060 - 11 3060 - 13 3060 - 13B 3060 - 13D 3042 - 3 3042 - 7 3042 - 7 3042 - 7 3050 - 9
PART NO.
GRID
KEY
PAGE
PART NO.
GRID
KEY
M4259T C14 M4259T D10 M4259T D12 M68954 A16 M68954 A18 M68954 A20 M70619 C18 M70619 D10 M87571 B20 M87571 E16 M87571 E18 M87571 60 68 B24 M93817 A16 N119316 B20 N119316 B24 N133783 E18 N203348 B2 N2445W C2 P46404 A22 P46404 A22 P46404 A24 P46404 B2 RE239058 D2 RE239058 D4 RE239058 D6 RE239058 D8 RE47323 C12 RE52347 B20 R1225R C10 R26286 D6 R26286 D8 R26286 E2 R26286 E4 R26286 E6 R26286 E8 R26375 B6 R26375 B18 R26375 D14 R26375 D16 R26375 D18 R26375 D20 R26375 D22 R26375 D24 R26375 E2 R26375 E2 R26375 E4 R26375 E4 R26375 E6 R26375 E6 R26375 E8 R26375 E8 R26375 E10 R26375 E12 R26375 E14 R26375 E16 R26375 E18 R26375 E20 R26448 C14 R26448 C20 R26448 E2 R26448 E4 R26448 E6 R26448 E8 R26448 E16 R26448 E18 R26552 E2 R26552 E4
10 22 16 28 5 5 8 9 1 8 8 31 6 39A 3 16 22 2 11 17 20 23 20 21 11 11 2 39 4 3 3 17 17 17 17 5 9 1 4 5 2 2 3 5 28 5 27 5 28 5 27 8 8 13 1 1 5 14 17 9 9 9 9 15 15 23 23
3050 - 9D 3051 - 3 3051 - 5 3015 - 3 3015 - 5 3015 - 7 3050 - 13 3051 - 3 3042 - 3 3063 - 3 3063 - 5 3042 - 7 3015 - 3 3042 - 3 3042 - 7 3063 - 5 3015 - 13 3045 - 3 3015 - 9 3015 - 9 3015 - 11 3015 - 13 3050 - 21 3050 - 23 3050 - 25 3050 - 27 3050 - 9B 3042 - 3 3050 - 9 3050 - 25 3050 - 27 3060 - 11 3060 - 13 3060 - 13B 3060 - 13D 3041 - 3 3041 - 15 3060 - 3 3060 - 5 3060 - 5B 3060 - 7 3060 - 7B 3060 - 9 3060 - 11 3060 - 11 3060 - 13 3060 - 13 3060 - 13B 3060 - 13B 3060 - 13D 3060 - 13D 3060 - 19 3060 - 19B 3060 - 19D 3063 - 3 3063 - 5 3064 - 3 3050 - 9D 3050 - 15 3060 - 11 3060 - 13 3060 - 13B 3060 - 13D 3063 - 3 3063 - 5 3060 - 11 3060 - 13
R26552 R26552 R26906 R26906 R26906 R26906 R27218 R27218 R27218 R27218 R27218 R27218 R27474 R27474 R27474 R27474 R28634 R28776 R28776 R28776 R28776 R28782 R29463 R30815 R30815 R31289 R31289 R31674 R31674 R31674 R31674 R32549 R32549 R32694 R32694 R32694 R32694 R33138 R33138 R33138 R33138 R33138 R33138 R33138 R33138 R33138 R33138 R33138 R33246 R33246 R33247 R33247 R33248 R33248 R33320 R33320 R33320 R33320 R33344 R33344 R33520 R33520 R35501 R35502 R35503 R38454 R39112
E6 E8 E2 E4 E6 E8 C14 C20 E2 E4 E6 E8 E2 E4 E6 E8 D2 E2 E4 E6 E8 D24 D16 E12 E14 D2 D4 D16 D18 D20 D22 E12 E14 D2 D2 D4 D4 B6 B18 D14 D20 D22 D24 E2 E4 E6 E8 E20 D2 D4 D2 D4 D2 D4 C16 C18 D10 D12 C18 D10 D6 D8 C20 C20 C20 A16 D14
23 23 20 20 20 20 13 18 8 8 8 8 21 21 21 21 26 2 2 2 2 2 7 23 14 22 23 8 4 3 3 3 25 10 11 10 11 21 8 2 1 1 4 29 28 29 6 6 15 15 17 17 5 5 2 1 2 2 4 6 15 15 14 14 14 34 2
PAGE
3060 - 13B 3060 - 13D 3060 - 11 3060 - 13 3060 - 13B 3060 - 13D 3050 - 9D 3050 - 15 3060 - 11 3060 - 13 3060 - 13B 3060 - 13D 3060 - 11 3060 - 13 3060 - 13B 3060 - 13D 3050 - 21 3060 - 11 3060 - 13 3060 - 13B 3060 - 13D 3060 - 9 3060 - 5 3060 - 19B 3060 - 19D 3050 - 21 3050 - 23 3060 - 5 3060 - 5B 3060 - 7 3060 - 7B 3060 - 19B 3060 - 19D 3050 - 21 3050 - 21 3050 - 23 3050 - 23 3041 - 3 3041 - 15 3060 - 3 3060 - 7 3060 - 7B 3060 - 9 3060 - 11 3060 - 13 3060 - 13B 3060 - 13D 3064 - 3 3050 - 21 3050 - 23 3050 - 21 3050 - 23 3050 - 21 3050 - 23 3050 - 11 3050 - 13 3051 - 3 3051 - 5 3050 - 13 3051 - 3 3050 - 25 3050 - 27 3050 - 15 3050 - 15 3050 - 15 3015 - 3 3060 - 3
MODEL 40, 4000 AND 4000S WINCHES PC2295
(08-MAR-06) PN=114
L23 MODEL 40, 4000 AND 4000S WINCHES NUMERICAL INDEX - CONTINUED PART NO.
GRID
KEY
R39112 R39112 R39112 R39112 R39112 R394R R394R R394R R394R R394R R394R R40184 R40184 R41465 R41465 R44357 R44358 R44359 R44365 R44365 R44365 R44366 R44366 R44366 R44367 R44367 R44367 R44648 R44648 R44648 R44648 R45438 R45438 R459R R459R R459R R459R R46218 R46218 R46218 R46218 R46323 R46324 R46325 R47607 R47607 R47607 R47607 R47607 R47607 R53317 R54124 R56463 R56463 R57345 R57345 R57621 R57621 R60170 R60170 R60458 R60458 R63692 R64776 R64776 R64776 R67840
D20 D22 E2 E4 E6 E2 E4 E6 E8 E16 E18 D2 D4 D14 D16 C8 C8 C8 C4 C6 C8 C4 C6 C8 C4 C6 C8 E2 E4 E6 E8 D20 D22 E2 E4 E6 E8 D2 D4 D6 D8 C22 C22 C22 D6 D8 E2 E4 E6 E8 A16 C12 D20 D22 D2 D4 D2 D4 E12 E12 A16 A16 C6 A22 A24 B2 D2
1 1 29 28 29 1 1 1 1 14 14 18 18 6 12 7 7 7 6 10 14 6 10 14 6 10 14 25 25 25 25 4 4 13 13 13 13 14 14 8 8 4 4 4 2 2 16 16 16 16 7 14 4 4 30 25 21 22 14 17 23 27 8 18 21 24 16
PAGE
PART NO.
GRID
KEY
3060 - 7 3060 - 7B 3060 - 11 3060 - 13 3060 - 13B 3060 - 11 3060 - 13 3060 - 13B 3060 - 13D 3063 - 3 3063 - 5 3050 - 21 3050 - 23 3060 - 3 3060 - 5 3050 - 7 3050 - 7 3050 - 7 3050 - 3 3050 - 5 3050 - 7 3050 - 3 3050 - 5 3050 - 7 3050 - 3 3050 - 5 3050 - 7 3060 - 11 3060 - 13 3060 - 13B 3060 - 13D 3060 - 7 3060 - 7B 3060 - 11 3060 - 13 3060 - 13B 3060 - 13D 3050 - 21 3050 - 23 3050 - 25 3050 - 27 3050 - 17 3050 - 17 3050 - 17 3050 - 25 3050 - 27 3060 - 11 3060 - 13 3060 - 13B 3060 - 13D 3015 - 3 3050 - 9B 3060 - 7 3060 - 7B 3050 - 21 3050 - 23 3050 - 21 3050 - 23 3060 - 19B 3060 - 19B 3015 - 3 3015 - 3 3050 - 5 3015 - 9 3015 - 11 3015 - 13 3050 - 21
R67840 R712R R72471 R72471 R72471 R72471 R72471 R72471 R72597 R72597 R76686 R76686 R80813 R80813 R80813 R80813 R81735 R81735 R81736 TY22464 TY22464 TY22464 TY22464 T101955 T102934 T104707 T106838 T113128 T113128 T113128 T118784 T120223 T120860 T121280 T121280 T121280 T122611 T123252 T125808 T125808 T125808 T126119 T127304 T127944 T127945 T128073 T128073 T128074 T128074 T128074 T128161 T128162 T128648 T128648 T129792 T129794 T129869 T129870 T129870 T131180 T13119 T13119 T13119 T131313 T131317 T131318 T131338
D4 C24 D6 D6 D6 D8 D8 D8 D6 D8 A18 A20 D2 D4 D6 D8 D2 D4 D4 B20 B24 E16 E18 A16 B20 D2 C22 B20 B20 B20 A16 D4 B12 C14 D10 D12 B4 A22 A22 A24 B2 B10 D2 C8 C8 C4 C8 C4 C8 C8 C14 C14 D6 D8 A18 A20 C8 C8 C8 A16 B12 E16 E18 C20 C20 C20 D2
16 5 9 10 13 9 10 13 16 16 19 23 19 20 12 12 13 13 19 2 28 5 5 13 34 25 7 7 8 9 5 6 4 15 16 10 1 1 6 22 25 4 24 11 9 10 11 11 9 12 6 5 13 13 3 3 11 9 12 26 6 9 9 7 10 12 9
MODEL 40, 4000 AND 4000S WINCHES PC2295
(08-MAR-06)
PAGE
PART NO.
GRID
KEY
3050 - 23 3050 - 19 3050 - 25 3050 - 25 3050 - 25 3050 - 27 3050 - 27 3050 - 27 3050 - 25 3050 - 27 3015 - 5 3015 - 7 3050 - 21 3050 - 23 3050 - 25 3050 - 27 3050 - 21 3050 - 23 3050 - 23 3042 - 3 3042 - 7 3063 - 3 3063 - 5 3015 - 3 3042 - 3 3050 - 21 3050 - 17 3042 - 3 3042 - 3 3042 - 3 3015 - 3 3050 - 23 3041 - 9 3050 - 9D 3051 - 3 3051 - 5 3015 - 15 3015 - 9 3015 - 9 3015 - 11 3015 - 13 3041 - 7 3050 - 21 3050 - 7 3050 - 7 3050 - 3 3050 - 7 3050 - 3 3050 - 7 3050 - 7 3050 - 9D 3050 - 9D 3050 - 25 3050 - 27 3015 - 5 3015 - 7 3050 - 7 3050 - 7 3050 - 7 3015 - 3 3041 - 9 3063 - 3 3063 - 5 3050 - 15 3050 - 15 3050 - 15 3050 - 21
T131338 T131361 T131414 T131460 T131540 T131541 T131557 T132233 T132316 T132316 T132316 T132805 T132831 T132832 T132914 T132915 T132916 T132939 T132946 T133035 T133036 T133048 T133132 T133132 T133139 T133170 T133213 T133224 T134122 T134216 T137929 T141059 T141059 T141059 T141059 T141596 T141646 T141680 T141680 T142043 T142169 T142170 T142269 T142269 T142269 T142389 T142438 T148161 T148423 T15610 T15610 T15610 T15610 T157641 T157641 T158619 T158619 T160179 T160179 T161932 T162454 T162531 T163149 T163149 T163149 T163182 T163182
D4 C24 A22 A20 C2 C2 C2 A16 C14 D10 D12 C20 A18 A20 B6 B6 B6 C8 C8 C12 C12 B6 A16 A22 C12 B6 D8 D8 A16 A16 A16 E2 E4 E6 E8 A16 B16 D2 D4 C12 C20 C20 C20 C20 C20 C8 C24 D4 C12 C16 C18 D10 D12 A22 A24 C2 C2 C10 C14 C22 D2 D4 E10 E12 E14 B20 B24
9 6 2 20 8 6 1 14 9 19 13 8 2 2 11 12 13 20 19 5 12 17 8 19 11 20 7 4 24 22 15 4 4 4 4 25 3 22 23 12 15 2 2 15 19 19 3 26 13 11 9 17 11 1 23 10 14 2 2 7 9 9 10 10 17 16 31
PAGE
3050 - 23 3050 - 19 3015 - 9 3015 - 7 3045 - 3 3045 - 3 3045 - 3 3015 - 3 3050 - 9D 3051 - 3 3051 - 5 3050 - 15 3015 - 5 3015 - 7 3041 - 3 3041 - 3 3041 - 3 3050 - 7 3050 - 7 3050 - 9B 3050 - 9B 3041 - 3 3015 - 3 3015 - 9 3050 - 9B 3041 - 3 3050 - 27 3050 - 27 3015 - 3 3015 - 3 3015 - 3 3060 - 11 3060 - 13 3060 - 13B 3060 - 13D 3015 - 3 3041 - 13 3050 - 21 3050 - 23 3050 - 9B 3050 - 15 3050 - 15 3050 - 15 3050 - 15 3050 - 15 3050 - 7 3050 - 19 3050 - 23 3050 - 9B 3050 - 11 3050 - 13 3051 - 3 3051 - 5 3015 - 9 3015 - 11 3045 - 3 3045 - 3 3050 - 9 3050 - 9D 3050 - 17 3050 - 21 3050 - 23 3060 - 19 3060 - 19B 3060 - 19D 3042 - 3 3042 - 7 II-3
PN=115
L24 MODEL 40, 4000 AND 4000S WINCHES NUMERICAL INDEX - CONTINUED PART NO.
GRID
KEY
PAGE
PART NO.
GRID
KEY
T163666 T163667 T164218 T164218 T164218 T16448 T16448 T16448 T164554 T165121 T165178 T165179 T165179 T165242 T165366 T165407 T165498 T165578 T165723 T165723 T16573 T166387 T166441 T166525 T173042 T173079 T173080 T173101 T173101 T173102 T173102 T173103 T173103 T173539 T173539 T173804 T173804 T176191 T177793 T177836 T177837 T177851 T185656 T185656 T185656 T185656 T185657 T185657 T185658 T185658 T185660 T185660 T185661 T185661 T185661 T185661 T186316 T186316 T190913 T190913 T191060 T19388 T19388 T205946 T205947 T205947 T205947
B20 B20 B20 B20 B24 C2 C2 C2 B18 E20 E20 E20 E20 B20 D2 B20 A24 A24 E16 E18 C8 B2 B2 B22 B18 B18 B18 D10 D12 D10 D12 D10 D12 A24 B2 A24 B2 E16 B24 B24 B24 B24 B20 B20 B24 B24 B20 B24 B20 B24 B20 B24 B20 C14 D10 D12 D6 D8 D10 D12 C12 C16 C18 C22 C6 C6 C22
36 25 14 38 12 3 4 9 10 11 8 4 7 21 9 33 24 25 4 4 8 26 27 3 2 6 5 18 12 11 5 24 18 26 28 27 29 16 15 18 1 24 8 11A 10 11 8A 3 8A 3 8A 3 8 9 19A 13 14 14 19 13 13 8 12 9 7 9 9
3042 - 3 3042 - 3 3042 - 3 3042 - 3 3042 - 7 3045 - 3 3045 - 3 3045 - 3 3041 - 15 3064 - 3 3064 - 3 3064 - 3 3064 - 3 3042 - 3 3050 - 21 3042 - 3 3015 - 11 3015 - 11 3063 - 3 3063 - 5 3050 - 7 3015 - 13 3015 - 13 3042 - 5 3041 - 15 3041 - 15 3041 - 15 3051 - 3 3051 - 5 3051 - 3 3051 - 5 3051 - 3 3051 - 5 3015 - 11 3015 - 13 3015 - 11 3015 - 13 3063 - 3 3042 - 7 3042 - 7 3042 - 7 3042 - 7 3042 - 3 3042 - 3 3042 - 7 3042 - 7 3042 - 3 3042 - 7 3042 - 3 3042 - 7 3042 - 3 3042 - 7 3042 - 3 3050 - 9D 3051 - 3 3051 - 5 3050 - 25 3050 - 27 3051 - 3 3051 - 5 3050 - 9B 3050 - 11 3050 - 13 3050 - 17 3050 - 5 3050 - 5 3050 - 17
T212838 T212838 T212838 T212838 T213128 T21368 T22827 T24862 T25050 T25050 T26565 T30476 T36393 T36393 T37587 T37592 T37592 T37592 T37593 T37593 T37593 T37594 T37594 T37594 T38710 T40703 T40703 T40703 T41326 T43615 T43615 T43615 T43645 T43645 T43645 T43645 T43645 T43645 T43645 T43645 T44784 T44784 T44784 T44784 T48412 T48412 T48805 T48805 T48805 T48805 T50842 T51622 T51622 T51622 T51625 T52368 T54532 T54532 T54533 T54533 T56840 T56840 T56840 T58477 T58477 T58477 T58477
E2 E4 E6 E8 B22 A16 C8 C24 A22 A24 B6 A16 B20 B24 C10 C4 C6 C8 C4 C6 C8 C4 C6 C8 A22 C14 D10 D12 C20 C4 C6 C8 E2 E2 E4 E4 E6 E6 E8 E8 E2 E4 E6 E8 C4 C8 E2 E4 E6 E8 B20 C4 C6 C8 C22 B6 D2 D4 D2 D4 C4 C8 C8 E2 E4 E6 E8
4 4 4 4 3 35 21 7 8 28 8 16 15 8 9 2 2 2 2 2 2 2 2 2 9 4 13 7 13 3 3 3 12 18 12 18 12 18 12 18 24 24 24 24 10 11 11 11 11 11 32 8 11 15 3 15 4 4 3 3 11 9 12 21 21 21 21
II-4
PAGE
PART NO.
GRID
KEY
3060 - 11 3060 - 13 3060 - 13B 3060 - 13D 3042 - 5 3015 - 3 3050 - 7 3050 - 19 3015 - 9 3015 - 11 3041 - 3 3015 - 3 3042 - 3 3042 - 7 3050 - 9 3050 - 3 3050 - 5 3050 - 7 3050 - 3 3050 - 5 3050 - 7 3050 - 3 3050 - 5 3050 - 7 3015 - 9 3050 - 9D 3051 - 3 3051 - 5 3050 - 15 3050 - 3 3050 - 5 3050 - 7 3060 - 11 3060 - 11 3060 - 13 3060 - 13 3060 - 13B 3060 - 13B 3060 - 13D 3060 - 13D 3060 - 11 3060 - 13 3060 - 13B 3060 - 13D 3050 - 3 3050 - 7 3060 - 11 3060 - 13 3060 - 13B 3060 - 13D 3042 - 3 3050 - 3 3050 - 5 3050 - 7 3050 - 17 3041 - 3 3050 - 21 3050 - 23 3050 - 21 3050 - 23 3050 - 3 3050 - 7 3050 - 7 3060 - 11 3060 - 13 3060 - 13B 3060 - 13D
T58769 T64769 T64769 T64769 T68099 T68099 T68435 T69938 T69938 T69938 T75482 T77857 T77857 T77857 T77857 T77857 T77857 T77857 T77857 T77857 T77857 T77858 T77858 T77858 T77932 T77932 T77932 T77932 T77932 T77932 T77932 T77932 T77932 T77932 T77932 T81880 T81954 T81954 T83328 T83426 T83426 T83426 T83426 T84696 T84697 T84697 T84698 T84699 T84700 T84701 T84702 T84703 T84709 T84710 T84711 T84712 T84713 T84714 T84727 T84727 T84727 T84727 T84729 T84729 T84733 T84733 T84735
C8 B6 B6 C10 A16 A16 A16 B20 B20 B24 D8 D18 D20 D22 E2 E8 E10 E12 E14 E16 E18 D14 D16 E20 D16 D18 D20 D20 D22 D22 E4 E6 E10 E10 E14 C10 C10 C14 C22 B6 B8 B20 C2 B6 C20 C20 C20 C20 B6 B6 C22 C20 C22 B6 C24 C24 C24 C4 C16 C18 D10 D12 C18 D10 C16 C18 C8
18 1 4 13 23 27 17 8 41 34 19 7 5 8 7 7 5 5 4 3 3 4 10 3 2 2 3 5 3 5 7 7 1 3 1 9 2 2 7 18 5 19 12 14 2 15 2 3 6 7 2 15 8 9 3 4 8 9 3 2 3 3 3 4 4 16 6
PAGE
3050 - 7 3041 - 3 3041 - 3 3050 - 9 3015 - 3 3015 - 3 3015 - 3 3042 - 3 3042 - 3 3042 - 7 3050 - 27 3060 - 5B 3060 - 7 3060 - 7B 3060 - 11 3060 - 13D 3060 - 19 3060 - 19B 3060 - 19D 3063 - 3 3063 - 5 3060 - 3 3060 - 5 3064 - 3 3060 - 5 3060 - 5B 3060 - 7 3060 - 7 3060 - 7B 3060 - 7B 3060 - 13 3060 - 13B 3060 - 19 3060 - 19 3060 - 19D 3050 - 9 3050 - 9 3050 - 9D 3050 - 17 3041 - 3 3041 - 5 3042 - 3 3045 - 3 3041 - 3 3050 - 15 3050 - 15 3050 - 15 3050 - 15 3041 - 3 3041 - 3 3050 - 17 3050 - 15 3050 - 17 3041 - 3 3050 - 19 3050 - 19 3050 - 19 3050 - 3 3050 - 11 3050 - 13 3051 - 3 3051 - 5 3050 - 13 3051 - 3 3050 - 11 3050 - 13 3050 - 7
MODEL 40, 4000 AND 4000S WINCHES PC2295
(08-MAR-06) PN=116
L25 MODEL 40, 4000 AND 4000S WINCHES NUMERICAL INDEX - CONTINUED PART NO.
GRID
KEY
T84775 T84775 T84776 T84777 T84777 T84778 T84778 T84780 T84780 T84781 T84781 T84800 T84800 T84800 T84800 T84801 T84801 T84802 T84809 T84810 T84812 T84812 T84813 T84814 T84818 T84819 T84826 T84826 T84826 T84826 T84826 T84829 T84829 T84829 T84829 T84834 T84851 T84851 T84851 T84851 T84937 U12547 U12547 U12547 U12547 U42011 U42392 X05HP-4 X4HP5ON-S Z40761
D6 D8 D6 D6 D8 D6 D8 D6 D8 D6 D8 E2 E4 E6 E8 C16 C18 C10 B8 B8 C18 D10 B10 D2 B6 B6 B18 C10 C12 C16 C18 E2 E4 E6 E8 C8 E2 E4 E6 E8 B12 B6 B12 B14 C10 C20 C4 D24 D24 A16
4 4 7 14 14 5 5 17 17 6 6 22 22 22 22 10 10 6 1 3 5 5 3 6 20 20 1 5 8 9 11 4 4 4 4 10 3 3 3 3 3 2 5 1 14 9 7 1 1 33
PAGE
PART NO.
GRID
KEY
PAGE
PART NO.
GRID
KEY
PAGE
3050 - 25 3050 - 27 3050 - 25 3050 - 25 3050 - 27 3050 - 25 3050 - 27 3050 - 25 3050 - 27 3050 - 25 3050 - 27 3060 - 11 3060 - 13 3060 - 13B 3060 - 13D 3050 - 11 3050 - 13 3050 - 9 3041 - 5 3041 - 5 3050 - 13 3051 - 3 3041 - 7 3050 - 21 3041 - 3 3041 - 3 3041 - 15 3050 - 9 3050 - 9B 3050 - 11 3050 - 13 3060 - 11 3060 - 13 3060 - 13B 3060 - 13D 3050 - 7 3060 - 11 3060 - 13 3060 - 13B 3060 - 13D 3041 - 9 3041 - 3 3041 - 9 3041 - 11 3050 - 9 3050 - 15 3050 - 3 3060 - 9 3060 - 9 3015 - 3
MODEL 40, 4000 AND 4000S WINCHES PC2295
(08-MAR-06)
II-5
PN=117