DOWNLOAD PDF : John Deere 700J CRAWLER DOZER PARTS MANUAL PC9473

Page 1

700J CRAWLER DOZER (S.N. -139435)

PARTS CATALOG 700J CRAWLER DOZER (S.N. -139435) PC9473 (Apr-07) English

Worldwide Construction and Forestry Division Worldwide Edition Litho in U.S.A. (Revised) COPYRIGHT © 2007 DEERE & COMPANY Moline, Illinois All rights reserved



000I-1 700J CRAWLER DOZER (S.N. -139435)

INTRODUCTION AND CUSTOMER INFORMATION T204444A

-UN-25OCT04

LEFT-HAND SIDE VIEW OF 700J CRAWLER (MANUFACTURED 2005- )

TO THE CUSTOMER THE PART NUMBERS IN THIS PARTS CATALOG WERE CORRECT AT THE TIME THIS CATALOG WAS PUBLISHED. IT IS OUR POLICY TO CONSTANTLY IMPROVE OUR MACHINES AND, THEREFORE, PART NUMBERS MAY CHANGE. WHEN ORDERING PARTS, VERIFY PART NUMBERS THROUGH YOUR DEALER.

(SPECIFICATIONS AND DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.)

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05)

000I-1 PN=1


000I-2 700J CRAWLER DOZER (S.N. -139435)

SERIAL NUMBER LOCATION EACH 700J CRAWLER MAY HAVE SEVEN SERIAL NUMBERS. ONE EACH FOR THE PRODUCT IDENTIFICATION NUMBER, THE ENGINE, THE HYDROSTATIC TRACK DRIVE MOTOR, THE HYDROSTATIC FRONT PUMP, THE HYDROSTATIC REAR PUMP AND THE MICRO COMPUTER. THE PRODUCT IDENTIFICATION NUMBER IS LOCATED ON THE LEFT-HAND SIDE OF THE CRAWLER FRAME BELOW THE OPERATOR’S STATION THE ENGINE SERIAL NUMBER PLATE IS LOCATED ON THE RIGHT-HAND SIDE OF THE CYLINDER BLOCK. THE HYDROSTATIC TRACK DRIVE MOTOR SERIAL NUMBER PLATE IS LOCATED ON THE END CAP OF THE DRIVE MOTOR. THE FRONT HYDROSTATIC PUMP SERIAL NUMBER PLATE IS LOCATED ON THE PUMP HOUSING. THE REAR HYDROSTATIC PUMP SERIAL NUMBER PLATE IS LOCATED ON THE PUMP HOUSING. THE MICRO-COMPUTER SERIAL NUMBER PLATE IS LOCATED ON THE BOTTOM OF THE COMPUTER. LEFT SIDE AND RIGHT SIDE, FRONT AND REAR OF THE CRAWLER ARE VIEWED BY FACING IN THE DIRECTION OF THE CRAWLER FORWARD TRAVEL.

WHENEVER SERIAL NUMBERS ARE REQUIRED ON WARRANTY CLAIMS OR CORRESPONDENCE PERTAINING TO THIS PRODUCT, IT IS EXTREMELY IMPORTANT THAT ALL CHARACTERS BE FURNISHED. THIS POINT CANNOT BE OVEREMPHASIZED.

PRODUCT IDENTIFICATION NUMBER TP16004

-UN-01JAN94

1. DESIGNATES CRAWLER MANUFACTURER 2. DESIGNATES CRAWLER MODEL 3. DESIGNATES CRAWLER CONFIGURATION 4. DESIGNATES CRAWLER SERIAL NUMBER 5. DESIGNATES UNIT TYPE

000I-2

TO - JOHN DEERE DUBUQUE WORKS 700J D - ANGLE BULLDOZER 123456 CRAWLER BULLDOZER

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=2


000I-3 700J CRAWLER DOZER (S.N. -139435)

ENGINE SERIAL NUMBER PLATE RGP3513

-UN-01JAN94

FIRST LINE

DEFINES

PE - JOHN DEERE TORREON ENGINE WORKS

DESIGNATES ENGINE MANUFACTURER

6

DESIGNATES NUMBER OF CYLINDERS

068 (6.8 LITERS)

DESIGNATES LITER DISPLACEMENT

H (DEISEL WITH AIR TO AIR TURBOCHARGER)

DESIGNATES TYPE OF AIR INTAKE SYSTEM

T - JOHN DEERE DUBUQUE WORKS

DESIGNATES USER FACTORY

XXXXXX

DESIGNATES ENGINE SERIAL NUMBER

SECOND LINE

APPLICATION

PE6068TT060

700J CRAWLER DOZER

700J CRAWLER DOZER (S.N. -139435)

PC9473

(04-AUG-05)

000I-3 PN=3


000I-4 700J CRAWLER DOZER (S.N. -139435)

SERIAL NUMBER LISTING INFORMATION SERIAL NUMBER INFORMATION IS LISTED TO SHOW ON WHICH MACHINES EACH PART CAN BE USED; FOR EXAMPLE: 000000 000000

THE PART CAN BE USED ON ALL MACHINES.

-

THE PART CAN BE USED ON MACHINES BEGINNING WITH THE SERIAL NUMBER LISTED. - 000000 THE PART CAN BE USED ON MACHINES UP TO AND INCLUDING THE SERIAL NUMBER LISTED. - 000000 THE PART CAN BE USED ON MACHINES BETWEEN AND INCLUDING THE SERIAL NUMBERS LISTED.

WHEN XXXXXX’S ARE LISTED IN PLACE OF A SERIAL NUMBER, A SERIAL NUMBER CHANGE WAS MADE, BUT THE EXACT SERIAL NUMBER WAS NOT AVAILABLE WHEN THE CATALOG WAS PRODUCED.

DIRECTION ARROW ARROWS ARE USED WITH ILLUSTRATIONS TO INDICATE THE FRONT OF THE UNIT. "RIGHT-HAND" AND "RIGHT-HAND" SIDES ARE DETERMINED BY FACING IN THE DIRECTION OF MACHINE FORWARD TRAVEL. EXCEPTION: FOR ALL BACKHOE PARTS, "RIGHT-HAND" AND "LEFT-HAND" SIDES, "FRONT" AND "REAR" ARE DETERMINED WHEN SEATED FOR BACKHOE OPEATION.

BOX-ENCLOSED ILLUSTRATIONS A KEY NUMBER, SHOWN IN THE PARTS LIST, IS ASSIGNED TO A BOX ENCLOSING ALL PARTS SOLD AS A SERVICE ASSEMBLY.

COMPLETE GOODS LISTINGS COMPLETE GOODS ARE LISTED IN BOLD FACE TYPE. ORDER SEPARATELY. DO NOT INCLUDE ON REPLACEMENT PARTS ORDER.

SI UNITS OF MEASURE METRIC DIMENSIONS ARE GIVEN, WHERE APPLICABLE, THROUGHOUT THIS PARTS CATALOG.

CHANGE INDICATOR LINE CHANGES AFFECTING THE ORDERING OF PARTS ARE IDENTIFIED BY VERTICAL LINES MARKED IN THE LEFTHAND MARGIN OF REVISED PARTS LISTING IMAGES. A LINE IS ALSO AT THE LEFT-HAND EDGE OF THE SAME PART NUMBER IN THE NUMERICAL INDEX TO SHOW THE LOCATION OF REVISED INFORMATION.

000I-4

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=4


000I-5 700J CRAWLER DOZER (S.N. -139435)

ALPHABETICAL INDEX PAGE

PAGE

A/C COMPRESSOR HARDWARE KIT...................................1832-10 A/C COMPRESSOR SHAFT SEAL KIT ...................................1832-9 A/C KIT, COMPRESSOR HARDWARE ..................................1832-10 ACCESS COVER, MAIN FRAME, REAR .................................1741-2 ACCESS COVER, OIL, MAIN FRAME .....................................1741-2 ACCESSORY, POWER.............................................................2006-2 ACTUATOR BEARING KIT, SEAT SUSPENSION (DELUXE)...........................................................................1821-20 ADAPTER, ENGINE OIL COOLER ..........................................0419-2 ADAPTER, HYDROSTATIC FILTER .........................................0355-2 ADAPTER, SPLINE, STANDARD HYDRAULIC PUMP ............2161-2 ADAPTER, TRACK ADJUSTER ...............................................0133-6 ADJUSTER IDLER YOKE, TRACK CHAIN TENSION .............0133-8 ADJUSTER PISTON, TRACK CHAIN TENSION......................0133-8 ADJUSTER SEALS, TRACK CHAIN TENSION .......................0133-8 ADJUSTER, TRACK .................................................................0133-6 ADJUSTER, TRACK CHAIN TENSION....................................0133-6 ADJUSTMENT KNOB, WEIGHT/HEIGHT, SEAT SUSPENSION......................................................................1821-6 AIR CLEANER CLEAN OUT VALVE.........................................0521-2 AIR CLEANER COVER ............................................................0521-2 AIR CLEANER FILTER ELEMENT WITH TURBOCHARGER...............................................................0521-2 AIR CLEANER RAINCAP WITH CLAMP .................................0521-2 AIR CLEANER STACK..............................................................0521-2 AIR CLEANER VACUUM SWITCH SENSOR ..........................0521-2 AIR CLEANER WITH TURBOCHARGER ................................0521-2 AIR COMPRESSOR, 24 VOLT (AIR SUSPENSION SEAT) ................................................1821-24 AIR CONDITIONER FIELD KIT ................................................1832-2 AIR CONDITIONER REAR COVER PLATE (S/N -XXXXXX) ....................................................................1810-4 AIR CONDITIONER REAR COVER PLATE (S/N XXXXXX- ) ................................................................ 1810-5A AIR CONDITIONER SIDE COVER PLATE (S/N -XXXXXX) ....................................................................1810-4 AIR CONDITIONER SIDE COVER PLATE (S/N XXXXXX- ) ................................................................ 1810-5A AIR CONDITIONING CHARGE FITTING .................................1832-4 AIR CONDITIONING COMPRESSOR .....................................1832-6 AIR CONDITIONING COMPRESSOR .....................................1832-8 AIR CONDITIONING COMPRESSOR BELT ............................1832-6 AIR CONDITIONING COMPRESSOR BRACKETS .................1832-6 AIR CONDITIONING COMPRESSOR MANIFOLD SEAL ....................................................................................1832-8 AIR CONDITIONING COMPRESSOR MANIFOLD AND DUST COVER ......................................................................1832-8 AIR CONDITIONING COMPRESSOR PULLEY.......................1832-6 AIR CONDITIONING COMPRESSOR STATOR .......................1832-8 AIR CONDITIONING CONDENSER (24 VOLT) .......................1832-2 AIR CONDITIONING CONDENSER FAN.................................1832-2 AIR CONDITIONING CONDENSER WIRING HARNESS ............................................................................1832-2 AIR CONDITIONING CORE, CONDENSER ............................1832-2 AIR CONDITIONING FIELD KIT (HIGH AND LOW PRESSURE REFRIGERANT HOSES) .......................1832-4 AIR CONDITIONING HOUSING KIT ........................................1832-2 AIR CONDITIONING LOUVERS (S/N -XXXXXX) ....................................................................1810-6 AIR CONDITIONING LOW PRESSURE SWITCH ...................1832-2 AIR CONDITIONING PLUMBING (HIGH AND LOW PRESSURE REFRIGERANT HOSES) ................................1832-4 AIR CONDITIONING PLUMBING GUARD (S/N -XXXXXX) ....................................................................1810-4

AIR CONDITIONING PLUMBING GUARD (S/N -XXXXXX).................................................................... 1810-6 AIR CONDITIONING PLUMBING GUARD (S/N XXXXXX- )................................................................. 1810-5A AIR CONDITIONING RECEIVER DRYER............................... 1832-2 AIR CONDITIONING REFRIGERANT LINE............................ 1832-2 AIR CONTROL VALVE (AIR SUSPENSION SEAT)............... 1821-26 AIR COVER, RECIRCULATION (S/N -XXXXXX).................................................................... 1810-4 AIR COVER, RECIRCULATION (S/N XXXXXX- )................................................................. 1810-5A AIR DUCTWORK FOAM (S/N -XXXXXX).................................................................... 1810-6 AIR FILTER COVER PLATE (S/N -XXXXXX).................................................................... 1810-4 AIR FILTER COVER PLATE (S/N XXXXXX- )................................................................. 1810-5A AIR FILTER, FRESH AIR, CAB (UPPER).............................................................................. 1831-8 AIR INTAKE (VSN 920839- ) (PE6068TT060) ................................................................... 0414-1 AIR INTAKE HOSE .................................................................. 0521-2 AIR INTAKE MANIFOLD (VSN 920839- ) (PE6068TT060) ................................................................... 0414-1 AIR INTAKE SYSTEM (VSN 920839- ) (PE6068TT060) ................................................................... 0414-1 AIR LINES (AIR SUSPENSION SEAT) .................................. 1821-26 AIR SUSPENSION SEAT WIRING HARNESS FROM SEAT COMPRESSOR HARNESS TO FUSE BOX ........... 1821-24 AIR SUSPENSION SEAT WIRING HARNESS FROM SEAT COMPRESSOR HARNESS TO FUSE BOX ........... 1821-26 ALARM, BACKUP .................................................................... 2004-4 ALARM, 12 VOLT WITH SHUTTER......................................... 1676-2 ALTERNATOR (24 VOLT/55 AMP) ........................................... 1672-2 ALTERNATOR ADJUSTING STRAP........................................ 0423-2 ALTERNATOR BRACKET ........................................................ 0423-2 ALTERNATOR FAN .................................................................. 1672-2 ALTERNATOR PULLEY ........................................................... 1672-2 ALTERNATOR SUPPORT........................................................ 0423-2 ANGLE CYLINDER COMPONENTS ....................................... 3265-2 ANGLE CYLINDER HEAD END PIN ....................................... 3243-2 ANGLE CYLINDER HYDRAULIC HOSES............................... 3263-6 ANGLE CYLINDER PACKING KITS ........................................ 3265-2 ANGLE CYLINDER ROD END PIN ......................................... 3201-2 ANGLE CYLINDER ROD SEAL KIT ........................................ 3265-2 ANGLE CYLINDER SEAL KITS............................................... 3265-2 ANGLE HOSE GUARD ............................................................ 3263-8 ANGLE HOSE, HEAD END ..................................................... 3263-8 ANGLE HOSE, ROD END ....................................................... 3263-8 ANGLE HYDRAULIC CYLINDER ............................................ 3265-2 ANGLE HYDRAULIC HOSES.................................................. 3263-6 ANGLE PLUMBING, DOZER................................................... 3263-6 ARM WITH SHAFT, HYDRAULIC CONTROL.......................... 3215-2 ARM, ENGINE ROCKER ......................................................... 0402-2 ARM, FRONT AND SIDE WINDOW WIPER ........................... 1814-6 ARMREST (DELUXE/AIR SUSPENSION) ............................ 1821-14 ARMREST PLATE (DELUXE/AIR SUSPENSION) ................ 1821-14 ARMREST, STANDARD SEAT ................................................. 1821-4 ATTACHMENTS MIRROR, REAR.......................................... 1810-14 AUXILIARY DRIVE COVER ................................................... 0404-10 AUXILIARY VALVE................................................................... 3262-2 AUXILIARY VALVE BELLCRANK ............................................ 3215-2 AUXILIARY VALVE CIRCUIT RELIEF VALVE (FIFTH FUNCTION) ............................................................ 3262-6 AUXILIARY VALVE CIRCUIT RELIEF VALVE (FOURTH FUNCTION)........................................................ 3262-4

A

700J CRAWLER DOZER (S.N. -139435)

PC9473

(13-APR-07)

000I-5 PN=5


000I-6 700J CRAWLER DOZER (S.N. -139435)

ALPHABETICAL INDEX - CONTINUED PAGE

PAGE

AUXILIARY VALVE WITH FLOAT (FIFTH FUNCTION) .............................................................3262-6 AUXILIARY VALVE WITH FLOAT (FOURTH FUNCTION) ........................................................3262-4 AUXILIARY VALVE WITH LINKAGE (FIFTH FUNCTION) .............................................................3262-6 AUXILIARY VALVE WITH LINKAGE (FOURTH FUNCTION) ........................................................3262-4 AXIAL PISTON HYDROSTATIC MOTOR................................0355-16

BLADE, HYDRAULIC SIX WAY LABEL (S/N XXXXXX- )................................................................. 1810-5A BLADE, REAR WINDOW WIPER ............................................ 1814-8 BLADE, 120 INCH (LT, XLT)..................................................... 3201-2 BLADE, 132 INCH (LGP) ......................................................... 3201-2 BLOCK ASSEMBLY, ENGINE SHORT .................................... 0404-6 BLOCK, ENGINE CYLINDER .................................................. 0404-2 BLOWER FAN HEATER (UPPER) ........................................... 1831-8 BLOWER MOTOR BULKHEAD, UNDERSEAT HEATER, ROPS AND CAB ................................................................. 1831-2 BLOWER WITH MOTOR, UNDER SEAT HEATER, ROPS AND CAB ................................................................. 1831-2 BOLTS, BLADE ........................................................................ 3201-2 BOOT CLIP KIT (AIR SUSPENSION SEAT).......................... 1821-24 BOOT KIT (AIR SUSPENSION SEAT)................................... 1821-24 BOOT KIT (DELUXE SEAT)................................................... 1821-18 BOOT, HYDRAULIC LINKAGE ................................................ 3215-2 BOOT, SINGLE LEVER CONTROL ......................................... 0315-2 BOOT, STANDARD SEAT SUSPENSION................................ 1821-6 BOOT, TRANSMISSION CONTROL LEVER ........................... 0315-2 BORE SEAL KIT, LIFT CYLINDER .......................................... 3265-4 BORE SEAL KIT, TILT CYLINDER .......................................... 3265-6 BOX AND CUP TRAY, LUNCH............................................... 1810-12 BOX, TOOL ............................................................................ 1810-12 BRACKET, ALTERNATOR........................................................ 0423-2 BRACKET, CAB HI-INTENSITY LIGHTS................................. 1673-6 BRACKET, DIPSTICK TUBE SUPPORT ................................. 0407-2 BRACKET, FINAL FUEL FILTER ............................................. 0420-4 BRACKET, FUEL LINE............................................................. 0420-6 BRACKET, HYDRAULIC FILTER ............................................. 2164-4 BRACKET, HYDROSTATIC REAR PUMP LIFTING LUG ..................................................................................... 0355-8 BRACKET, LIGHT .................................................................... 1673-4 BRACKET, PARK LOCK SUPPORT ........................................ 1115-4 BRACKET, POWER TRAIN ..................................................... 0540-2 BRACKET, PRIMARY FUEL FILTER ....................................... 0420-2 BRACKET, RADIO MOUNTING............................................... 2001-2 BRACKET, REAR MIRROR ................................................... 1810-14 BRACKET, SEAT TILTING, CAB .............................................. 1811-4 BRACKET, SEAT TILTING, ROPS ........................................... 1811-2 BRACKET, SINGLE LEVER CONTROL .................................. 0315-2 BRACKET, TENSIONER.......................................................... 0429-2 BRACKET, TRANSMISSION CONTROL LEVER .................... 0315-2 BRACKETS WITH IDLER ........................................................ 0133-8 BRACKETS, AIR CONDITIONING COMPRESSOR ............... 1832-6 BRAKE ..................................................................................... 1115-2 BRAKE HOSES ....................................................................... 0363-2 BRAKE PEDAL ........................................................................ 1115-2 BRAKE PEDAL AND MOUNTING ........................................... 1115-2 BRAKE SUPPORT................................................................... 1115-2 BRAKE VALVE ......................................................................... 1062-2 BRAKE VALVE AND FITTINGS ............................................... 1062-2 BRAKE VALVE HOSES............................................................ 0363-2 BRAKE VALVE KIT .................................................................. 1062-2 BRAKE, FINAL DRIVES .......................................................... 0201-2 BRAKE, FINAL DRIVES .......................................................... 0201-4 BREAKER, HI-INTENSITY LIGHT CIRCUIT, CAB ..................................................................................... 1673-6 BREAKER, HI-INTENSITY LIGHT CIRCUIT, ROPS .................................................................................. 1673-4 BULB, CAB HI-INTENSITY LIGHTS ........................................ 1673-6 BULB, DOME LIGHT................................................................ 1810-6 BULB, DOMELIGHT AND LIGHT .......................................... 1810-5A BULB, ROPS HI-INTENSITY LIGHTS ..................................... 1673-4 BULKHEAD PLATE, TILT CYLINDER PLUMBING .................. 3263-4 BULKHEAD, BLOWER MOTOR, ROPS AND CAB UNDER SEAT HEATER....................................................... 1831-2

B BACK, SEAT PAD .....................................................................1821-2 BACKING PLATE, UNDER SEAT, CAB ONLY ..........................1831-2 BACKUP ALARM ......................................................................2004-4 BALL, C-FRAME PIVOT ...........................................................3243-2 BAR, HOOD SUPPORT............................................................1911-4 BARREL, HYDRAULIC ANGLE CYLINDER.............................3265-2 BARREL, HYDRAULIC LIFT CYLINDER .................................3265-4 BARREL, HYDRAULIC TILT CYLINDER..................................3265-6 BASE PLATE, SEAT (MOUNTING BRACKET/RISER) ...............................................................1821-4 BASE WITH HEATER, ROPS AND CAB SEAT ........................1831-2 BASE, CAB SEAT .....................................................................1811-4 BASE, ROPS SEAT ..................................................................1811-2 BATTERIES AND CABLES.......................................................1671-2 BATTERY CABLE, MASTER DISCONNECT SWITCH ............1671-2 BATTERY CABLES, NEGATIVE AND POSITIVE, HEAVY DUTY.......................................................................1671-2 BATTERY COVER, HEAVY DUTY............................................1671-2 BATTERY GROUND STRAP ....................................................1671-2 BATTERY HOLDDOWN PLATE, HEAVY DUTY .......................1671-2 BATTERY MASTER DISCONNECT SWITCH ..........................1671-2 BATTERY, HEAVY DUTY..........................................................1671-2 BEARING CAP, MAIN AND THRUST .......................................0404-2 BEARING KIT, ACTUATOR, SEAT SUSPENSION (DELUXE)...........................................................................1821-20 BEARING ROLLER KIT (AIR SUSPENSION SEAT) ..............1821-24 BEARING, ENGINE MAIN AND THRUST ................................0401-1 BEARING, HYDROSTATIC PUMP..........................................0355-12 BEARING, HYDROSTATIC PUMP SHAFT ROLLER .............0355-10 BEARINGS, CARRIER ROLLER ..............................................0133-4 BEARINGS, CONNECTING ROD (PE6068TT060) (VSN 920839- ) ....................................................................0403-1 BELLCRANK, AUXILIARY VALVE ............................................3215-2 BELLCRANK, PARK LOCK ......................................................1115-4 BELT IDLER TENSIONER........................................................0429-2 BELT, AIR CONDITIONING COMPRESSOR ...........................1832-6 BELT, DRIVE (WITHOUT AIR CONDITIONING) ......................0512-2 BELT, FAN DRIVE .....................................................................0429-2 BELT, FAN POLY RIB (WITHOUT AIR CONDITIONING)..................................................................0512-2 BELT, TWO INCH, SEAT...........................................................1821-2 BIT, BLADE END ......................................................................3201-2 BLADE BOLTS..........................................................................3201-2 BLADE C-FRAME SOCKET AND SHIMS ................................3201-2 BLADE CUPPED END BITS.....................................................3201-2 BLADE CUTTING EDGE ..........................................................3201-2 BLADE END BIT .......................................................................3201-2 BLADE HYDRAULIC PLUMBING.............................................3263-8 BLADE PINS.............................................................................3201-2 BLADE TORQUE AND SHIM DECAL (ENGLISH, FRENCH, SPANISH)............................................................3201-2 BLADE, FRONT AND SIDE WINDOW WIPERS ......................1814-6 BLADE, HYDRAULIC SIX WAY LABEL (S/N -XXXXXX) ....................................................................1810-4

000I-6

700J CRAWLER DOZER (S.N. -139435)

PC9473

(13-APR-07) PN=6


000I-7 700J CRAWLER DOZER (S.N. -139435)

ALPHABETICAL INDEX - CONTINUED PAGE

PAGE

BUMPER KIT (AIR SUSPENSION SEAT) ..............................1821-26 BUMPER, DOOR ......................................................................1813-4 BUSHING, CAMSHAFT ............................................................0404-2 BUSHING, CROSSBAR............................................................1743-2 BUSHINGS, C-FRAME .............................................................3243-2 BYPASS VALVE, HYDROSTATIC OIL COOLER ....................0363-10

CAB PARTS (S/N XXXXXX- ) ................................................ 1810-5A CAB PLATE.............................................................................. 1810-8 CAB SEAT BASE ..................................................................... 1811-4 CAB STEP TREAD PLATES.................................................... 1822-2 CAB STEPS ............................................................................. 1822-2 CAB STRUCTURE WELDMENT CONVENIENCE ASSEMBLY.......................................................................... 1811-4 CAB WINDOWS....................................................................... 1814-2 CAB WIRING HARNESS ......................................................... 1674-4 CABLE, MASTER DISCONNECT SWITCH ............................ 1671-2 CABLE, NEGATIVE, HEAVY DUTY BATTERY ........................ 1671-2 CABLE, POSITIVE, HEAVY DUTY BATTERY ......................... 1671-2 CAM KIT, SEAT SUSPENSION (DELUXE)............................ 1821-20 CAMSHAFT ............................................................................. 0402-1 CAN TERMINATION RESISTOR ............................................. 1674-4 CAN TERMINATION RESISTOR ............................................. 1674-8 CANOPY CORNER COVERS ................................................. 1927-2 CAP, AIR CLEANER WITH CLAMP ......................................... 0521-2 CAP, FUEL TANK FILLER ........................................................ 0564-2 CAP, HYDROSTATIC PUMP END............................................ 0355-2 CAP, MAIN AND THRUST BEARING ...................................... 0404-2 CAP, PIVOT SHAFT ................................................................. 1743-4 CAP, RADIATOR ...................................................................... 0511-2 CAP, WIPER WASHER RESERVOIR ...................................... 1814-4 CAP, WIPER WASHER TANK .................................................. 1814-4 CAP,ENGINE OIL FILLER TUBE ............................................. 0407-2 CARRIER ROLLER BEARINGS .............................................. 0133-4 CARRIER ROLLER COVER .................................................... 0133-4 CARRIER ROLLER SUPPORT ............................................... 0133-4 CARRIER ROLLER WITH COMPONENT PARTS................... 0133-4 CAUTION AND START LABEL (S/N -XXXXXX).................................................................... 1810-4 CAUTION AND START LABEL (S/N XXXXXX- )................................................................. 1810-5A CENTER GUARD, MAIN FRAME ............................................ 1741-2 CHAIN IDLER, TRACK ............................................................ 0133-8 CHAIN TENSION ADJUSTER IDLER YOKE, TRACK............. 0133-8 CHAIN TENSION ADJUSTER PISTON, TRACK..................... 0133-8 CHAIN TENSION ADJUSTER SEALS, TRACK ...................... 0133-8 CHAIN, SPROCKET DRIVE .................................................... 0132-6 CHAIN, TRACK, LUBED 40 LINK WITH 16 INCH SHOES ...................................................................... 0132-2 CHAIN, TRACK, LUBED 40 LINK WITH 16 INCH SHOES (CONTINUED) ............................................. 0132-4 CHAIN, TRACK, LUBED 40 LINK WITHOUT SHOES ................................................................................ 0132-2 CHAIN, TRACK, LUBED 40 LINK WITHOUT SHOES (CONTINUED) ....................................................... 0132-4 CHARGE FITTING, AIR CONDITIONING ............................... 1832-4 CHARGE RELIEF POPPET, HYDROSTATIC TRACK DRIVE MOTOR END CAP ................................................ 0355-20 CHART, PERIODIC SERVICE ................................................. 1322-2 CHROME EXHAUST MUFFLER STACK ................................. 1911-2 CIGAR LIGHTER ..................................................................... 2006-2 CIRCUIT BREAKER, CAB HI-INTENSITY LIGHTS ................ 1673-6 CIRCUIT BREAKER, ELECTRICAL RELAYS, AND FUSES, CAB ..................................................................... 1674-10 CIRCUIT BREAKER, ELECTRICAL RELAYS, AND FUSES, ROPS .................................................................. 1674-12 CIRCUIT BREAKER, LIGHT.................................................... 1673-4 CIRCUIT RELIEF VALVE, AUXILIARY VALVE (FIFTH FUNCTION) ............................................................ 3262-6 CIRCUIT RELIEF VALVE, AUXILIARY VALVE (FOURTH FUNCTION)........................................................ 3262-4 CLEAN OUT COVER, HYDROSTATIC RESERVOIR .............. 0364-4 CLOTH HEADREST (AIR SUSPENSION)............................. 1821-22 CLOTH SEAT (AIR SUSPENSION) ....................................... 1821-22

C C-FLANGE ADAPTER ..............................................................0355-2 C-FRAME BUSHINGS ..............................................................3243-2 C-FRAME HOSE GUARD.........................................................1921-4 C-FRAME LUBRICATION CROSSBAR HOSE.........................1743-6 C-FRAME LUBRICATION HOSES ...........................................3243-2 C-FRAME PINS ........................................................................3243-2 C-FRAME PIVOT BALL ............................................................3243-2 C-FRAME SOCKET AND SHIMS, BLADE ...............................3201-2 C-FRAME, LOW GROUND PRESSURE..................................3243-2 C-FRAME, STANDARD ............................................................3243-2 CAB AND ROPS SEAT BASE WITH HEATER UNDER SEAT.......................................................................1831-2 CAB AND ROPS UNDER SEAT HEATER ................................1831-2 CAB COMPONENTS (S/N -XXXXXX) ....................................................................1810-4 CAB COMPONENTS (S/N XXXXXX- ) ................................................................ 1810-5A CAB CORNER COVERS ..........................................................1927-4 CAB DOOR...............................................................................1813-2 CAB DOOR FRAME AND GLASS............................................1813-2 CAB DOOR HOLD OPEN.........................................................1813-4 CAB DOOR HOLD OPEN HANDLE GRIP ...............................1813-4 CAB DOOR HOLD OPEN LATCH ............................................1813-4 CAB DOOR LATCH ..................................................................1813-2 CAB DOOR LATCH COVER .....................................................1813-2 CAB DOOR LATCH, STRIKER AND GUARD ..........................1813-2 CAB DOORS AND LATCHES...................................................1813-2 CAB FOOTREST ......................................................................1810-8 CAB FRAME STRUCTURE CONVENIENCE ASSEMBLY.......1811-4 CAB FRESH AIR FILTER (UPPER)...............................................................................1831-8 CAB FUSE BLOCK LABEL (S/N -XXXXXX) ....................................................................1810-4 CAB FUSE BLOCK LABEL (S/N XXXXXX- ) ................................................................ 1810-5A CAB FUSES AND RELAYS ....................................................1674-10 CAB FUSES, CIRCUIT BREAKER, AND ELECTRICAL RELAYS ......................................................1674-10 CAB HEADLINER COMPONENTS (S/N -XXXXXX) ....................................................................1810-6 CAB HEADLINER, FRONT (WITH LOUVERS) (S/N -XXXXXX) ....................................................................1810-6 CAB HEADLINER, REAR (WITH LOUVERS) (S/N -XXXXXX) ....................................................................1810-6 CAB HEATER (UPPER)............................................................1831-8 CAB HEATER HOSE ................................................................1831-6 CAB HEATER PLUMBING........................................................1831-6 CAB HEATER THERMOSTAT (UPPER)...................................1831-8 CAB HI-INTENSITY LIGHTS ....................................................1673-6 CAB HIGH-INTENSITY WORK LIGHT LABEL.........................1673-6 CAB LOUVERS (S/N -XXXXXX) ....................................................................1810-6 CAB MOUNTS AND ISOLATORS ............................................1811-6 CAB NOISE REDUCTION FOAM.............................................1807-4 CAB NOISE REDUCTION FOAM/ISOLATOR ..........................1807-2 CAB ONLY BACKING PLATE UNDER SEAT............................1831-2 CAB PARTS (S/N -XXXXXX) ....................................................1810-4

700J CRAWLER DOZER (S.N. -139435)

PC9473

(13-APR-07)

000I-7 PN=7


000I-8 700J CRAWLER DOZER (S.N. -139435)

ALPHABETICAL INDEX - CONTINUED PAGE

PAGE

CLOTH SEAT (DELUXE) ........................................................1821-12 CLOTH SEAT BACK (AIR SUSPENSION) .............................1821-22 CLOTH SEAT PAD (AIR SUSPENSION) ................................1821-22 CLUTCH, STARTING MOTOR..................................................0422-2 COLD WEATHER/ETHER STARTING AID...............................0505-2 COMPONENTS, CAB (S/N -XXXXXX) ....................................................................1810-4 COMPONENTS, CAB (S/N XXXXXX- ) ................................................................ 1810-5A COMPONENTS, CAB HEADLINER (S/N -XXXXXX) ....................................................................1810-6 COMPONENTS, HYDRAULIC CONTROL VALVE ...................3262-2 COMPONENTS, ROPS ............................................................1810-2 COMPONENTS, STANDARD SEAT SUSPENSION.................1821-6 COMPRESSOR BELT, AIR CONDITIONING ...........................1832-6 COMPRESSOR BRACKETS, AIR CONDITIONING ................1832-6 COMPRESSOR HARDWARE KIT, A/C ..................................1832-10 COMPRESSOR PULLEY, AIR CONDITIONING ......................1832-6 COMPRESSOR SHAFT SEAL KIT, A/C ...................................1832-9 COMPRESSOR, AIR CONDITIONING ....................................1832-6 COMPRESSOR, AIR CONDITIONING ....................................1832-8 COMPRESSOR, 24 VOLT (AIR SUSPENSION SEAT) .................................................................................1821-24 CONDENSER FAN, AIR CONDITIONING................................1832-2 CONDENSER, AIR CONDITIONING (24 VOLT) ......................1832-2 CONDENSER, AIR CONDITIONING CORE ............................1832-2 CONDITIONER, COOLANT (750J) ..........................................1369-1 CONNECTING ROD (PE6068TT060) (VSN 920839- ) ....................................................................0403-1 CONNECTING ROD BEARINGS (PE6068TT060) (VSN 920839- ) ....................................................................0403-1 CONROL UNIT, ELECTRONIC ENGINE..................................0575-2 CONTROL HANDLE, T-BAR.....................................................3215-2 CONTROL LEVER, TRANSMISSION, WITH SPEED IN GRIP ................................................................................0315-2 CONTROL LINKAGE, AUXILIARY VALVE (FIFTH FUNCTION) .............................................................3262-6 CONTROL LINKAGE, AUXILIARY VALVE (FOURTH FUNCTION) ........................................................3262-4 CONTROL LINKAGE, HYDRAULIC .........................................3215-2 CONTROL MOTOR, HYDROSTATIC TRACK DRIVE MOTOR ..............................................................................0355-22 CONTROL PANEL, OVERHEAD SWITCH (S/N -XXXXXX) ....................................................................1810-6 CONTROL SHAFT WITH ARM, HYDRAULIC ..........................3215-2 CONTROL U-JOINT (HOUSING),HYDRAULIC........................3215-2 CONTROL UNIT, ENGINE........................................................0575-2 CONTROL VALVE TO HYDRAULIC PUMP, PRESSURE HOSE ..............................................................2163-4 CONTROL VALVE, ELECTRONIC DISPLACEMENT.............0355-22 CONTROL VALVE, HYDRAULIC (DOES NOT INCLUDE HOSE ADAPTERS) .............................................3262-2 CONTROL WITH SPEED IN GRIP, SINGLE LEVER ...............0315-2 CONTROL, PILOT PRESSURE .............................................0355-22 CONTROL, SEAT SLIDE (ALL SEATS) ....................................1821-8 CONTROL, SEAT TILT (ALL SEATS) .......................................1821-8 CONVENIENCE ASSEMBLY, CAB ...........................................1811-4 CONVENIENCE ASSEMBLY, ROPS ........................................1811-2 CONVERTER, RADIO (24 VOLT TO 12 VOLT) ........................2001-2 CONVERTER, 24V TO 12V POWER (5 AMP) .........................2006-2 COOLANT CONDITIONER (750J) ...........................................1369-1 COOLANT DRAIN VALVE, ENGINE.........................................0404-2 COOLANT HEATER, ENGINE..................................................0505-4 COOLANT HEATER, FUEL FIRED ..........................................0505-8 COOLER BYPASS VALVE, HYDROSTATIC OIL ....................0363-10 COOLER, ENGINE OIL ............................................................0419-2 COOLER, HYDRAULIC OIL .....................................................0511-2

COOLER, HYDROSTATIC OIL ................................................ 0511-2 COOLING SYSTEM SAND SHIELD........................................ 0511-4 CORDURA SLEEVE, BLADE CYLINDER PLUMBING ........... 3263-8 CORDURA SLEEVE, TILT CYLINDER PLUMBING ................ 3263-4 CORE, CONDENSER, AIR CONDITIONING .......................... 1832-2 CORE, EVAPORATOR (UPPER) ............................................. 1831-8 CORE, HEATER (UPPER) ....................................................... 1831-8 CORE, ROPS AND CAB UNDER SEAT HEATER................... 1831-2 CORNER COVERS, CAB ........................................................ 1927-4 CORNER COVERS, CANOPY ................................................ 1927-2 COUNTERWEIGHT, FRONT ................................................... 1749-2 COUPLER, FLYWHEEL ........................................................... 0325-2 COUPLING, HYDROSTATIC FRONT AND REAR PUMP .................................................................................. 0355-4 COUPLING, STANDARD HYDRAULIC PUMP ........................ 2161-2 COVER PLATE, FUSE, CAB (S/N -XXXXXX).................................................................... 1810-4 COVER PLATE, FUSE, CAB (S/N XXXXXX- )................................................................. 1810-5A COVER PLATE, FUSE, ROPS ................................................. 1810-2 COVER PLATE, HYDROSTATIC RESERVOIR ACCESS.............................................................................. 0364-4 COVER PLATE, RADIATOR..................................................... 1921-2 COVER, AIR CLEANER........................................................... 0521-2 COVER, AIR RECIRCULATION (S/N -XXXXXX).................................................................... 1810-4 COVER, AIR RECIRCULATION (S/N XXXXXX- )................................................................. 1810-5A COVER, AUXILIARY DRIVE .................................................. 0404-10 COVER, BATTERY, HEAVY DUTY .......................................... 1671-2 COVER, CAB DOOR LATCH ................................................... 1813-2 COVER, CARRIER ROLLER ................................................... 0133-4 COVER, ENGINE OIL FILLER INLET...................................... 0407-1 COVER, ENGINE ROCKER ARM ........................................... 0402-3 COVER, FLYWHEEL................................................................ 0540-2 COVER, HEATER TOP (UPPER) ............................................ 1831-8 COVER, HYDRAULIC RESERVOIR ........................................ 2164-2 COVER, HYDROSTATIC PUMP SIDE ..................................... 0355-2 COVER, HYDROSTATIC RESERVOIR .................................... 0364-4 COVER, HYDROSTATIC TRACK DRIVE MOTOR END CAP........................................................................... 0355-20 COVER, MAIN FRAME OIL ACCESS...................................... 1741-2 COVER, MAIN FRAME, REAR ACCESS ................................ 1741-2 COVER, MICROPROCESSOR................................................ 0375-2 COVER, PTO SHAFT............................................................... 2161-4 COVER, RADIO (S/N -XXXXXX).................................................................... 1810-6 COVER, REAR WIPER MOTOR.............................................. 1814-8 COVER, START AID SWITCH ................................................. 0505-6 COVER, THERMOSTAT........................................................... 0418-2 COVER, VANDAL (ROPS) ....................................................... 1810-2 COVER,TIMING GEAR............................................................ 0402-4 COVERS, BOTTOM, TRANSVERSE CASE ............................ 1741-2 COVERS, CAB CORNER ........................................................ 1927-4 COVERS, CANOPY CORNER ................................................ 1927-2 COVERS, TRACK FRAME..................................................... 0133-10 COWL SEAL, HOOD SUPPORT ............................................. 1911-4 CRANKSHAFT AND BEARINGS............................................. 0401-1 CRANKSHAFT POSITION SENSOR ...................................... 0402-4 CROSSBAR ............................................................................. 1743-2 CROSSBAR BUSHING............................................................ 1743-2 CROSSBAR C-FRAME LUBRICATION HOSE........................ 1743-6 CROSSBAR LUBE HOSE ....................................................... 1743-2 CROSSBAR PIN ...................................................................... 1743-2 CROSSBAR REMOTE LUBRICATION, C-FRAME.................. 1743-6 CROSSBAR SUPPORT, BOLT ON.......................................... 0131-2

000I-8

700J CRAWLER DOZER (S.N. -139435)

PC9473

(13-APR-07) PN=8


000I-9 700J CRAWLER DOZER (S.N. -139435)

ALPHABETICAL INDEX - CONTINUED PAGE

PAGE

CROSSBAR SUPPORT, BOLT ON (LOW GROUND PRESSURE) ........................................................................0131-2 CUP TRAY AND LUNCH BOX................................................1810-12 CUPPED END BITS FOR BLADE ............................................3201-2 CUTTING EDGE, BLADE .........................................................3201-2 CYLINDER BARREL, HYDRAULIC, ANGLE............................3265-2 CYLINDER BARREL, HYDRAULIC, LIFT.................................3265-4 CYLINDER BARREL, HYDRAULIC, TILT .................................3265-6 CYLINDER BLOCK, ENGINE...................................................0404-2 CYLINDER BLOCK, HYDROSTATIC MOTOR........................0355-18 CYLINDER GUARD ..................................................................3265-2 CYLINDER HEAD END PIN, LIFT ............................................3265-4 CYLINDER HEAD, ENGINE .....................................................0409-2 CYLINDER LINER O-RING KIT (PE6068TT060) (VSN 920839- ) ....................................................................0403-1 CYLINDER PISTON, HYDRAULIC, ANGLE .............................3265-2 CYLINDER PISTON, HYDRAULIC, LIFT..................................3265-4 CYLINDER PISTON, HYDRAULIC, TILT ..................................3265-6 CYLINDER ROD GUIDE, ANGLE ............................................3265-2 CYLINDER ROD GUIDE, LIFT .................................................3265-4 CYLINDER ROD GUIDE, TILT..................................................3265-6 CYLINDER ROD WITH END, ANGLE ......................................3265-2 CYLINDER ROD WITH END, LIFT ...........................................3265-4 CYLINDER ROD WITH END, TILT ...........................................3265-6 CYLINDER, ANGLE, HYDRAULIC ...........................................3265-2 CYLINDER, HYDROSTATIC SERVO CAN ...............................0355-2 CYLINDER, LIFT, HYDRAULIC ................................................3265-4 CYLINDER, STARTING AID FLUID COLD WEATHER/ETHER....................................................0505-2 CYLINDER, TILT, HYDRAULIC.................................................3265-6

DOOR BUMPER ...................................................................... 1813-4 DOOR FRAME AND GLASS, CAB .......................................... 1813-2 DOOR HOLD OPEN, CAB....................................................... 1813-4 DOOR LATCH COVER, CAB ................................................... 1813-2 DOOR LATCH LEVER ............................................................. 1813-2 DOOR LATCH, CAB................................................................. 1813-2 DOOR OUTER HANDLE ......................................................... 1813-2 DOOR, CAB ............................................................................. 1813-2 DOOR, HOLD OPEN LATCH CAB .......................................... 1813-4 DOOR, HOOD SERVICE ......................................................... 1911-2 DOOR, HYDRAULIC RESERVOIR .......................................... 2164-2 DOOR, HYDROSTATIC RESERVOIR...................................... 0364-4 DOOR, SERVICE, ENGINE SIDE SHIELD.............................. 1912-2 DOORS AND LATCHES, CAB ................................................. 1813-2 DRAIN COCK, RADIATOR....................................................... 0511-2 DRAIN HOSE, ENVIRONMENTAL, ENGINE......................... 2163-10 DRAIN HOSE, FUEL FILTER................................................... 0563-2 DRAIN HOSE, HYDROSTATIC MOTOR ................................ 0363-10 DRAIN PAN FOAM, UPPER HEATER ..................................... 1831-8 DRAIN VALVE KIT, FINAL FUEL FILTER................................. 0420-4 DRAIN VALVE KIT, PRIMARY FUEL FILTER........................... 0420-2 DRAIN VALVE, CAB HEATER PLUMBING.............................. 1831-6 DRAIN VALVE, ENGINE COOLANT ........................................ 0404-2 DRAIN VALVE, FUEL TANK..................................................... 0564-2 DRAIN VALVE, HYDRAULIC, HYDROSTATIC AND ENGINE .................................................................... 2163-10 DRAWBAR PIN ........................................................................ 1511-2 DRAWBAR PIN, 4000S WINCH .............................................. 1511-6 DRAWBAR, STANDARD.......................................................... 1511-2 DRAWBAR, 4000S WINCH ..................................................... 1511-6 DRIVE BELT (WITHOUT AIR CONDITIONING)...................... 0512-2 DRIVE CHAIN SPROCKET ..................................................... 0132-6 DRIVE CHAIN SPROCKET SEGMENT................................... 0132-6 DRIVE SHAFT, UNIVERSAL FINAL ........................................ 0201-2 DRIVE SHAFT, UNIVERSAL FINAL ........................................ 0201-4 DRIVE THRU HYDRAULIC PUMP WITH SHAFT ................... 2161-4 DRIVE THRU PUMP SUCTION HOSE.................................... 2163-8 DRIVE, FAN ............................................................................. 0429-2 DRIVES, FINAL........................................................................ 0201-2 DRIVES, FINAL........................................................................ 0201-4 DRIVING LIGHTS .................................................................... 1673-2 DUCTWORK FOAM, AIR (S/N -XXXXXX).................................................................... 1810-6 DUST COVER AND MANIFOLD, AIR CONDITIONING COMPRESSOR ....................................... 1832-8

D DAMPER, CRANKSHAFT TORSIONAL...................................0429-1 DASH AND MONITOR..............................................................1676-2 DASH PANEL, LOWER, CAB (S/N -XXXXXX) ....................................................................1810-4 DASH PANEL, LOWER, CAB (S/N XXXXXX- ) ................................................................ 1810-5A DASH PANEL, LOWER, ROPS.................................................1810-2 DECAL, BLADE TORQUE AND SHIM (ENGLISH, FRENCH, SPANISH)............................................................3201-2 DECAL, HEATER AND FAN CONTROL ...................................1322-2 DECAL, HEATER AND FAN CONTROL (S/N -XXXXXX) ....................................................................1810-6 DECALS (FRENCH AND SPANISH) ........................................1322-4 DECALS AND LABELS (ENGLISH) .........................................1322-2 DECELERATOR ENGAGEMENT ROTARY SENSOR..............1115-2 DEFLECTOR GRID, SAND SHIELD.........................................0511-4 DEFLECTOR, ROCK, MOUNTING PLATE...............................0131-2 DEFLECTORS, ROCK............................................................0131-10 DEFROST LOUVERS (S/N -XXXXXX) ....................................................................1810-6 DESIGNATION LABEL, HYDRAULIC AND HYDROSTATIC OIL TANK 10W30 .......................................1322-2 DIAGNOSTIC PLUMBING, HYDROSTATIC/ TRANSMISSION ..................................................................0363-6 DIPSTICK TUBE SUPPORT BRACKET...................................0407-2 DIPSTICK, ENGINE OIL...........................................................0407-2 DISCONNECT LABEL ..............................................................1322-2 DISCONNECT SWITCH CABLE, MASTER .............................1671-2 DISCONNECT SWITCH, MASTER ..........................................1671-2 DISPLACEMENT CONTROL VALVE, ELECTRONIC.............0355-22 DOME LIGHT AND BULB (S/N -XXXXXX) ....................................................................1810-6 DOMELIGHT AND LIGHT BULB ........................................... 1810-5A

700J CRAWLER DOZER (S.N. -139435)

PC9473

(13-APR-07)

E ECU.......................................................................................... 0575-2 EDGE GUARD MOLDING, TILT CYLINDER PLUMBING.......................................................................... 3263-4 EDGE, BLADE CUTTING ........................................................ 3201-2 ELECTRICAL RESISTOR, CAB HEATER (UPPER).............................................................................. 1831-8 ELECTRONIC DISPLACEMENT CONTROL VALVE............. 0355-22 ELECTRONIC ENGINE CONTROL UNIT ............................... 0575-2 ELECTRONIC SWITCH OVERHEAD CONTROL PANEL (S/N -XXXXXX).................................................................... 1810-6 ELEMENT, AIR CLEANER FILTER WITH TURBOCHARGER .............................................................. 0521-2 ELEMENT, ENGINE OIL FILTER (VSN 920839-) .................... 0407-5 ELEMENT, FINAL FUEL FILTER ............................................. 0420-4 ELEMENT, PRIMARY FUEL FILTER ....................................... 0420-2 ELEMENT, TRANSMISSION FILTER ...................................... 0364-2 END BIT, BLADE...................................................................... 3201-2 END BITS FOR BLADE, CUPPED .......................................... 3201-2

000I-9 PN=9


000I-10 700J CRAWLER DOZER (S.N. -139435)

ALPHABETICAL INDEX - CONTINUED PAGE

PAGE

END CAP ASSEMBLY, HYDROSTATIC CHARGE HOUSING.............................................................................0355-8 END CAP, HYDROSTATIC PUMP ............................................0355-2 END CAP, HYDROSTATIC TRACK DRIVE MOTOR...............0355-20 ENGINE CONTROL UNIT ........................................................0575-2 ENGINE COOLANT HEATER...................................................0505-4 ENGINE COOLANT HEATER POWER CORD.........................0505-4 ENGINE COOLANT HEATING ELEMENT ...............................0505-4 ENGINE HARNESS START RELAY .........................................1674-8 ENGINE OIL DIPSTICK............................................................0407-2 ENGINE OIL FILLER INLET COVER .......................................0407-1 ENGINE OIL FILLER TUBE......................................................0407-2 ENGINE OIL FILLER TUBE CAP .............................................0407-2 ENGINE OIL FILTER (VSN 920839-) .......................................0407-5 ENGINE OIL FILTER HEAD (VSN 920839-) ............................0407-5 ENGINE OIL PAN .....................................................................0407-2 ENGINE OIL PAN DRAIN VALVE ...........................................2163-10 ENGINE OIL PRESSURE SENSOR ........................................1678-2 ENGINE OVERHAUL KIT .........................................................0404-8 ENGINE SHORT BLOCK ASSEMBLY......................................0404-6 ENGINE SIDE SHIELD SERVICE DOOR ................................1912-2 ENGINE SIDE SHIELDS, RIGHT AND LEFT ...........................1912-2 ENGINE SPEED LABEL (S/N -XXXXXX) ....................................................................1810-4 ENGINE SPEED LABEL (S/N XXXXXX- ) ................................................................ 1810-5A ENGINE SPEED LABEL, REVERSE RATIO (S/N -XXXXXX) ....................................................................1810-4 ENGINE SPEED LABEL, REVERSE RATIO (S/N XXXXXX- ) ................................................................ 1810-5A ENGINE SPEED POTENTIOMETER SWITCH ........................1676-2 ENGINE SPEED REVERSE LABEL (S/N -XXXXXX) ....................................................................1810-4 ENGINE SPEED REVERSE LABEL (S/N XXXXXX- ) ................................................................ 1810-5A ENGINE START AID, COLD WEATHER/ETHER......................0505-2 ENGINE VENTILATING HOSE .................................................0408-2 ENGINE VENTILATING SYSTEM ............................................0408-2 ENGINE WIRING HARNESS ...................................................1674-8 ENGINE, ENVIRONMENTAL DRAIN HOSE ..........................2163-10 ENVIRONMENTAL DRAIN VALVE .........................................2163-10 ENVIRONMENTAL ENGINE DRAIN HOSE ...........................2163-10 ETHER STARTING AID/COLD WEATHER...............................0505-2 EVAPORATOR CORE (UPPER)...............................................1831-8 EXHAUST MANIFOLD..............................................................0410-1 EXHAUST MUFFLER ...............................................................0531-2 EXHAUST MUFFLER STACK...................................................1911-2 EXHAUST MUFFLER STACK, CHROME .................................1911-2 EXHAUST VALVE, ENGINE......................................................0409-2

FAN POLY RIB BELT, (WITHOUT AIR CONDITIONING)................................................................. 0512-2 FAN PULLEY............................................................................ 0512-2 FAN SHIELD, RADIATOR......................................................... 0511-2 FAN SHROUD, RADIATOR ...................................................... 0511-2 FAN SPACER ........................................................................... 0512-2 FAN, AIR CONDITIONING CONDENSER............................... 1832-2 FAN, ALTERNATOR ................................................................. 1672-2 FAN, HEATER BLOWER (UPPER) .......................................... 1831-8 FEEDBACK LINK, SWASHPLATE ......................................... 0355-12 FEEDBACK SPRING, HYDROSTATIC TRACK DRIVE MOTOR ................................................................. 0355-20 FIELD KIT, AIR CONDITIONER............................................... 1832-2 FILLER PLUG, HYDRAULIC RESERVOIR.............................. 2164-2 FILTER BRACKET, HYDRAULIC ............................................. 2164-4 FILTER COVER PLATE, AIR (S/N -XXXXXX).................................................................... 1810-4 FILTER COVER PLATE, AIR (S/N XXXXXX- )................................................................. 1810-5A FILTER ELEMENT, AIR CLEANER WITH TURBOCHARGER .............................................................. 0521-2 FILTER HEAD, ENGINE OIL (VSN 920839-) ........................... 0407-5 FILTER HEAD, HYDRAULIC.................................................... 2164-4 FILTER HEAD, TRANSMISSION ............................................. 0364-2 FILTER HOSE, HYDRAULIC ................................................... 2163-6 FILTER HOSES, HYDROSTATIC........................................... 0363-12 FILTER, AIR ............................................................................. 0521-2 FILTER, CAB FRESH AIR (UPPER).............................................................................. 1831-8 FILTER, ENGINE OIL (VSN 920839-)...................................... 0407-5 FILTER, FINAL FUEL............................................................... 0420-4 FILTER, HYDRAULIC OIL........................................................ 2164-4 FILTER, HYDROSTATIC/TRANSMISSION .............................. 0364-2 FILTER, PRIMARY FUEL......................................................... 0420-2 FILTER, TRANSMISSION........................................................ 0364-2 FILTER, TRANSMISSION ELEMENT...................................... 0364-2 FILTRATION MANIFOLD, HYDROSTATIC PUMP ................... 0355-4 FINAL DRIVE BRAKE PISTON................................................ 0201-2 FINAL DRIVE BRAKE PISTON................................................ 0201-4 FINAL DRIVE DRAIN PLUG GUARDS.................................... 0201-6 FINAL DRIVE GUARD KIT (LGP) .......................................... 0131-12 FINAL DRIVE INNER HOUSING ............................................. 0201-2 FINAL DRIVE INNER HOUSING ............................................. 0201-4 FINAL DRIVE INPUT GEAR .................................................... 0201-2 FINAL DRIVE INPUT GEAR .................................................... 0201-4 FINAL DRIVE OUTER HOUSING............................................ 0201-2 FINAL DRIVE OUTER HOUSING............................................ 0201-4 FINAL DRIVES......................................................................... 0201-2 FINAL DRIVES......................................................................... 0201-4 FINAL DRIVES BRAKE ........................................................... 0201-2 FINAL DRIVES BRAKE ........................................................... 0201-4 FITTING, AIR CONDITIONING CHARGE ............................... 1832-4 FITTINGS (AIR SUSPENSION SEAT) ................................... 1821-26 FITTINGS, BRAKE VALVE....................................................... 1062-2 FLANGED AXLE SHAFT SEAL ............................................... 0201-2 FLANGED AXLE SHAFT SEAL ............................................... 0201-4 FLOAT, AUXILIARY VALVE (FIFTH FUNCTION) ............................................................ 3262-6 FLOAT, AUXILIARY VALVE (FOURTH FUNCTION)........................................................ 3262-4 FLOOR MAT........................................................................... 1810-10 FLOOR PLATE ISOLATORS.................................................... 1810-8 FLOOR PLATE SEAL............................................................... 1810-8 FLOOR PLATE, CAB AND ROPS............................................ 1810-8 FLYWHEEL .............................................................................. 0433-1 FLYWHEEL COUPLER ............................................................ 0325-2 FLYWHEEL COVER................................................................. 0540-2

F FACEPLATE, ROPS SWITCHES..............................................1810-2 FAN ...........................................................................................0512-2 FAN AND HEATER CONTROL DECAL (S/N -XXXXXX) ....................................................................1810-6 FAN BELT..................................................................................0512-2 FAN CONTROL AND HEATER DECAL (S/N -XXXXXX) ....................................................................1810-6 FAN DRIVE ...............................................................................0429-2 FAN DRIVE BELT......................................................................0429-2 FAN DRIVE HOUSING .............................................................0429-2 FAN DRIVE HUB.......................................................................0429-2 FAN DRIVE PULLEY ................................................................0429-2 FAN GUARD .............................................................................0511-2 FAN POLY RIB BELT ................................................................0512-2

000I-10

700J CRAWLER DOZER (S.N. -139435)

PC9473

(13-APR-07) PN=10


000I-11 700J CRAWLER DOZER (S.N. -139435)

ALPHABETICAL INDEX - CONTINUED PAGE

FLYWHEEL HOUSING .............................................................0433-2 FOAM/ISOLATOR, CAB NOISE REDUCTION .........................1807-2 FOAM, AIR DUCTWORK (S/N -XXXXXX) ....................................................................1810-6 FOAM, UPPER HEATER DRAIN PAN ......................................1831-8 FOLLOWER, CAMSHAFT ........................................................0402-2 FOOTREST, CAB......................................................................1810-8 FOOTREST, ROPS ...................................................................1810-8 FORWARD GUARD, MAIN FRAME..........................................1741-2 FORWARD, NEUTRAL AND REVERSE LABEL ......................1322-2 FORWARD, NEUTRUAL, AND REVERSE TRANSMISSION CONTROL LEVER...................................0315-2 FORWARD, NEUTRUAL, AND REVERSE LABEL ...................0315-2 FRAME, CAB DOOR AND GLASS...........................................1813-2 FRAME, LOW GROUND PRESSURE......................................3243-2 FRAME, MAIN ..........................................................................1741-2 FRAME, STANDARD ................................................................3243-2 FRAME, TRACK .......................................................................0131-2 FRAME, TRACK (LOW GROUND PRESSURE) ......................0131-2 FRENCH AND SPANISH LABELS AND DECALS....................1322-4 FRENCH OR SPANISH LABEL AND DECAL KIT ....................1322-4 FRESH AIR FILTER, CAB (UPPER)...............................................................................1831-8 FRONT AXIAL PISTON HYDROSTATIC PUMP .......................0355-2 FRONT CAB HEADLINER (WITH LOUVERS) (S/N -XXXXXX) ....................................................................1810-6 FRONT COUNTERWEIGHT.....................................................1749-2 FRONT PLATE..........................................................................0404-4 FRONT ROPS HEADLINER .....................................................1810-2 FRONT TRACK CHAIN IDLER AND BRACKETS ....................0133-8 FRONT WINDOW GLASS ........................................................1814-2 FRONT WINDOW WIPER ........................................................1814-6 FUEL FILTER, FINAL................................................................0420-4 FUEL FILTER, PRIMARY..........................................................0420-2 FUEL FIRED COOLANT HEATER KIT .....................................0505-8 FUEL HEATER KIT ...................................................................0420-4 FUEL HOSES ...........................................................................0563-2 FUEL INJECTION LINES .........................................................0413-2 FUEL INJECTION NOZZLE......................................................0413-2 FUEL INJECTION PUMP .........................................................0413-2 FUEL LINES .............................................................................0563-2 FUEL LINES, FILTER................................................................0420-6 FUEL LINES, PRIMARY FUEL FILTER ....................................0563-2 FUEL SENDER WIRING HARNESS ........................................0564-2 FUEL SHUT OFF VALVE ..........................................................0563-2 FUEL TANK...............................................................................0564-2 FUEL TANK DRAIN VALVE.......................................................0564-2 FUEL TANK FILLER CUP .........................................................0564-2 FUEL TANK, FUEL SENDER ...................................................0564-2 FUEL TRANSFER PUMP W/STRAIGHT FLEX FITTINGS ...........................................0421-1 FUSE BLOCK LABEL ...............................................................1674-4 FUSE BLOCK LABEL ...............................................................1674-6 FUSE BLOCK LABEL, CAB (S/N -XXXXXX) ....................................................................1810-4 FUSE BLOCK LABEL, CAB (S/N XXXXXX- ) ................................................................ 1810-5A FUSE COVER PLATE, CAB (S/N -XXXXXX) ....................................................................1810-4 FUSE COVER PLATE, CAB (S/N XXXXXX- ) ................................................................ 1810-5A FUSE COVER PLATE, ROPS...................................................1810-2 FUSES, CIRCUIT BREAKER, AND ELECTRICAL RELAYS, CAB ....................................................................1674-10 FUSES, CIRCUIT BREAKER, AND ELECTRICAL RELAYS, ROPS .................................................................1674-12

700J CRAWLER DOZER (S.N. -139435)

PC9473

(13-APR-07)

PAGE

G GASKET KIT, ENGINE IN-CHASSIS OVERHAUL................... 0452-1 GASKET KIT, ENGINE OVERHAUL ........................................ 0452-2 GASKET KIT, HYDRAULIC PUMP .......................................... 2161-2 GASKET KIT, HYDRAULIC PUMP, DRIVE THRU ................... 2161-4 GASKET, AIR INLET (VSN 920839- ) (PE6068TT060) ................................................................... 0414-1 GASKET, ENGINE CYLINDER HEAD ..................................... 0409-2 GASKET, ENGINE ROCKER ARM COVER ............................ 0402-3 GASKET, HYDROSTATIC DRIVE MOTOR ............................ 0355-18 GASKET, HYDROSTATIC END CAP ....................................... 0355-8 GASKET, HYDROSTATIC END CAP ..................................... 0355-20 GASKET,TIMING GEAR .......................................................... 0402-4 GAUGE, HYDRAULIC RESERVOIR SIGHT ............................ 2164-2 GEAR, CAMSHAFT ................................................................. 0402-1 GEAR, CRANKSHAFT............................................................. 0401-1 GEAR, ENGINE OIL PUMP ..................................................... 0407-4 GEAR, FLYWHEEL RING ........................................................ 0433-1 GEAR, FUEL INJECTION PUMP ............................................ 0413-2 GEAR, IDLER .......................................................................... 0404-4 GLASS, CAB DOOR FRAME................................................... 1813-2 GLASS, FRONT WINDOW ...................................................... 1814-2 GLASS, REAR WINDOW......................................................... 1814-2 GRAY CIRCLE LABEL ............................................................. 1810-2 GRID, SAND SHIELD DEFLECTOR........................................ 0511-4 GRILLE .................................................................................... 1921-2 GRILLE HOUSING................................................................... 1921-2 GRILLE HOUSING HOSE GUARD.......................................... 1921-2 GRILLE MOUNTED AND REAR WORK LIGHTS.................... 1673-2 GRILLE, HEAVY DUTY............................................................ 1921-4 GRIP, CONTROLLER HANDLE, SINGLE LEVER CONTROL ........................................................................... 0315-2 GRIP, TRANSMISSION CONTROL LEVER ............................ 0315-2 GROUND SPEED LABEL ........................................................ 0315-2 GROUND STRAP, BATTERY ................................................... 1671-2 GROUND STRAP, MICROPROCESSOR TRANSMISSION CONTROLLER........................................ 0375-2 GROUND STRAP, STARTER................................................... 1674-4 GUARD KIT, FINAL DRIVE (LGP) ......................................... 0131-12 GUARD SUPPORT, SPROCKET............................................. 0131-2 GUARD, AIR CONDITIONING PLUMBING (S/N -XXXXXX).................................................................... 1810-4 GUARD, AIR CONDITIONING PLUMBING (S/N -XXXXXX).................................................................... 1810-6 GUARD, AIR CONDITIONING PLUMBING (S/N XXXXXX- )................................................................. 1810-5A GUARD, ANGLE HOSE ........................................................... 3263-8 GUARD, C-FRAME HOSE ....................................................... 1921-4 GUARD, CYLINDER ................................................................ 3265-2 GUARD, FAN............................................................................ 0511-2 GUARD, GRILLE HOUSING HOSE......................................... 1921-2 GUARD, HEAVY DUTY HOSE................................................. 1921-4 GUARD, LIGHT HARNESS...................................................... 1673-4 GUARD, MAIN FRAME, CENTER ........................................... 1741-2 GUARD, MAIN FRAME, FORWARD........................................ 1741-2 GUARD, MAIN FRAME, REAR ................................................ 1741-2 GUARD, SPROCKET ............................................................... 0132-8 GUARDS, FINAL DRIVE DRAIN PLUGS ................................ 0201-6 GUARDS, REAR ROCK........................................................... 0131-8 GUARDS, REAR ROCK (LOW GROUND PRESSURE).......... 0131-8 GUARDS, ROCK...................................................................... 0131-4 GUARDS, ROCK (LOW GROUND PRESSURE AND X-LONG TRACK) ................................................................ 0131-6 GUARDS, ROPS, LEFT AND RIGHT ...................................... 1741-2 GUIDE, CYLINDER ROD, ANGLE........................................... 3265-2 GUIDE, CYLINDER ROD, LIFT................................................ 3265-4

000I-11 PN=11


000I-12 700J CRAWLER DOZER (S.N. -139435)

ALPHABETICAL INDEX - CONTINUED PAGE

PAGE

GUIDE, CYLINDER ROD, TILT.................................................3265-6 GUIDE, IDLER ..........................................................................0133-8

HEATER SWITCH, ROPS AND CAB UNDER SEAT HEATER .............................................................................. 1831-2 HEATER TOP COVER (UPPER) ............................................. 1831-8 HEATER TRAY FOR ROPS AND CAB, UNDER SEAT.................................................................................... 1831-2 HEATER, BLOWER FAN (UPPER) .......................................... 1831-8 HEATER, CAB (UPPER).......................................................... 1831-8 HEATER, COOLANT, FUEL FIRED ......................................... 0505-8 HEATER, ENGINE COOLANT................................................. 0505-4 HEATER, ROPS AND CAB SEAT BASE ................................. 1831-2 HEATER, ROPS AND CAB, UNDER SEAT ............................. 1831-2 HEATER, THERMAL EXPANSION VALVE, CAB (UPPER).............................................................................. 1831-8 HEATER, UPPER CAB ............................................................ 1831-8 HEATING ELEMENT, ENGINE COOLANT .............................. 0505-4 HEAVY DUTY GRILLE............................................................. 1921-4 HEAVY DUTY HOSE GUARD ................................................. 1921-4 HEIGHT ADJUSTMENT KIT, SEAT (DELUXE)...................... 1821-20 HI-INTENSITY LIGHTS, ROPS................................................ 1673-4 HIGH AND LOW PRESSURE AIR CONDITIONING REFRIGERANT HOSES ..................................................... 1832-4 HIGH PRESSURE TRANSMISSION HOSES ......................... 0363-4 HIGH-INTENSITY LIGHTS, CAB ............................................. 1673-6 HINGE, HYDROSTATIC RESERVOIR DOOR ......................... 0364-4 HITCH PIN, DRAWBAR ........................................................... 1511-2 HITCH PIN, QUICK LOCK ....................................................... 1511-4 HITCH PIN, RETRIEVAL HITCH.............................................. 1511-4 HITCH, PLATE, RETRIEVAL.................................................... 1511-4 HOLD OPEN LATCH, CAB DOOR .......................................... 1813-4 HOLD OPEN, CAB DOOR....................................................... 1813-4 HOLDER, OPERATOR MANUAL............................................. 1821-4 HOLDER, OPERATOR MANUAL (DELUXE/AIR SUSPENSION).................................................................. 1821-14 HOOD ...................................................................................... 1911-2 HOOD SERVICE DOOR .......................................................... 1911-2 HOOD SUPPORT .................................................................... 1911-4 HOOD SUPPORT BAR............................................................ 1911-4 HOOD SUPPORT COWL SEAL .............................................. 1911-4 HOOK, TOW ............................................................................ 1512-2 HORN....................................................................................... 2004-2 HOSE GUARD, ANGLE CYLINDER ........................................ 3263-8 HOSE GUARD, C-FRAME ....................................................... 1921-4 HOSE GUARD, GRILLE HOUSING......................................... 1921-2 HOSE GUARD, HEAVY DUTY................................................. 1921-4 HOSE, AIR INTAKE ................................................................. 0521-2 HOSE, ANGLE, HEAD END .................................................... 3263-8 HOSE, ANGLE, ROD END ...................................................... 3263-8 HOSE, CAB HEATER .............................................................. 1831-6 HOSE, CROSSBAR C-FRAME LUBRICATION....................... 1743-6 HOSE, CROSSBAR LUBE ...................................................... 1743-2 HOSE, DRIVE THRU PUMP, SUCTION .................................. 2163-8 HOSE, ENGINE VENTILATING ............................................... 0408-2 HOSE, ENVIRONMENTAL ENGINE DRAIN.......................... 2163-10 HOSE, FRONT AND SIDE WINDSHIELD WASHER............... 1814-6 HOSE, HYDRAULIC FILTER ................................................... 2163-6 HOSE, HYDRAULIC PRESSURE............................................ 2163-4 HOSE, HYDRAULIC PUMP TO CONTROL VALVE................. 2163-4 HOSE, HYDRAULIC PUMP, SUCTION ................................... 2163-2 HOSE, HYDRAULIC VALVE TO FILTER.................................. 2163-6 HOSE, HYDROSTATIC SUCTION ........................................... 0363-8 HOSES, A/C REFRIGERANT (HIGH AND LOW PRESSURE)........................................................................ 1832-4 HOSES, AIR CONDITIONING CONDENSER REFRIGERANT................................................................... 1832-2 HOSES, ANGLE HYDRAULIC ................................................. 3263-6 HOSES, BRAKE ...................................................................... 0363-2 HOSES, BRAKE VALVE........................................................... 0363-2

H HANDLE GRIP, CAB DOOR HOLD OPEN ...............................1813-4 HANDLE, DOOR OUTER .........................................................1813-2 HANDLE, T-BAR CONTROL.....................................................3215-2 HANDLE, TRANSMISSION CONTROL LEVER.......................0315-2 HARDWARE KIT, A/C COMPRESSOR ..................................1832-10 HARNESS FROM SEAT COMPRESSOR HARNESS TO FUSE BOX, AIR SUSPENSION SEAT WIRING ................1821-24 HARNESS FROM SEAT COMPRESSOR HARNESS TO FUSE BOX, AIR SUSPENSION SEAT WIRING ................1821-26 HARNESS GUARD, LIGHT ......................................................1673-4 HARNESS, AIR CONDITIONING CONDENSER WIRING ................................................................................1832-2 HARNESS, CAB HEATER WIRING (UPPER) ..........................1831-8 HARNESS, CAB WIRING .........................................................1674-4 HARNESS, CAB WORK LIGHT WIRING .................................1673-6 HARNESS, COMPRESSOR WIRING, SEAT (AIR SUSPENSION)...................................................................1821-24 HARNESS, ENGINE WIRING...................................................1674-8 HARNESS, FUEL SENDER WIRING .......................................0564-2 HARNESS, RADIO WIRING .....................................................2001-2 HARNESS, REAR WIPER MOTOR WIRING ...........................1814-8 HARNESS, ROPS WIRING ......................................................1674-6 HARNESS, ROPS WORK LIGHT .............................................1673-4 HARNESS, SEAT POWER (AIR SUSPENSION) ...................1821-24 HARNESS, TRANSMISSION WIRING .....................................1674-2 HARNESS, UNDER SEAT ROPS AND CAB HEATER WIRING ................................................................................1831-2 HARNESS, WITH SWITCH AND COVER, TRANSMISSION CONTROL LEVER...................................0315-2 HARNESS, WITH SWITCH AND COVER, SINGLE LEVER CONTROL ...............................................................0315-2 HEAD END PIN, ANGLE CYLINDER .......................................3243-2 HEAD END PIN, LIFT CYLINDER ............................................3265-4 HEAD END PIN, TILT CYLINDER ............................................3201-2 HEAD, ENGINE CYLINDER .....................................................0409-2 HEAD, FINAL FUEL FILTER .....................................................0420-4 HEAD, HYDRAULIC FILTER.....................................................2164-4 HEAD, TRANSMISSION FILTER ..............................................0364-2 HEADER KIT, PRIMARY FUEL FILTER ...................................0420-2 HEADLIGHTS ...........................................................................1673-2 HEADLINER COMPONENTS, CAB (S/N -XXXXXX) ....................................................................1810-6 HEADLINER, CAB FRONT (WITH LOUVERS) (S/N -XXXXXX) ....................................................................1810-6 HEADLINER, CAB REAR (WITH LOUVERS) (S/N -XXXXXX) ....................................................................1810-6 HEADLINER, REAR ROPS ......................................................1810-2 HEADLINER, ROPS .................................................................1810-2 HEADREST (DELUXE)...........................................................1821-12 HEADREST, CLOTH (AIR SUSPENSION).............................1821-22 HEADREST, VINYL (AIR SUSPENSION)...............................1821-22 HEATER AND FAN CONTROL DECAL ....................................1322-2 HEATER AND FAN CONTROL DECAL (S/N -XXXXXX) ....................................................................1810-6 HEATER CORE (UPPER).........................................................1831-8 HEATER CORE, ROPS AND CAB UNDER SEAT....................1831-2 HEATER DRAIN PAN FOAM, UPPER ......................................1831-8 HEATER HOSE, CAB ...............................................................1831-6 HEATER KIT, FUEL...................................................................0420-4 HEATER PLUMBING, CAB.......................................................1831-6 HEATER PLUMBING, ROPS SEAT BASE ...............................1831-4

000I-12

700J CRAWLER DOZER (S.N. -139435)

PC9473

(13-APR-07) PN=12


000I-13 700J CRAWLER DOZER (S.N. -139435)

ALPHABETICAL INDEX - CONTINUED PAGE

PAGE

HOSES, C-FRAME LUBRICATION ..........................................3243-2 HOSES, FUEL ..........................................................................0563-2 HOSES, HYDRAULIC TILT PLUMBING ...................................3263-4 HOSES, HYDROSTATIC FILTER............................................0363-12 HOSES, LIFT ............................................................................3263-2 HOSES, RIPPER ....................................................................3263-10 HOSES, TILT, ROD AND HEAD END.......................................3263-8 HOSES, TRANSMISSION COOLER BYPASS PLUMBING.........................................................................0363-10 HOSES, TRANSMISSION HIGH PRESSURE .........................0363-4 HOUSING KIT, AIR CONDITIONING........................................1832-2 HOUSING, ENGINE OIL COOLER ..........................................0419-2 HOUSING, FAN DRIVE ............................................................0429-2 HOUSING, FLYWHEEL ............................................................0433-2 HOUSING, GRILLE ..................................................................1921-2 HOUSING, HYDROSTATIC CHARGE ......................................0355-8 HOUSING, INNER FINAL DRIVE .............................................0201-2 HOUSING, INNER FINAL DRIVE .............................................0201-4 HOUSING, OUTER FINAL DRIVE ...........................................0201-2 HOUSING, OUTER FINAL DRIVE ...........................................0201-4 HOUSING, TRACK ADJUSTER ...............................................0133-6 HOUSING, WORK LIGHT CAB HI-INTENSITY........................1673-6 HOUSING, WORK LIGHT, ROPS.............................................1673-4 HUB, FAN DRIVE......................................................................0429-2 HYDRAULIC AND HYDROSTATIC OIL TANK 10W30 OIL DESIGNATION LABEL ..................................................1322-2 HYDRAULIC CONTROL LINKAGE ..........................................3215-2 HYDRAULIC CONTROL SHAFT WITH ARM ...........................3215-2 HYDRAULIC CONTROL U-JOINT (HOUSING)........................3215-2 HYDRAULIC CONTROL VALVE (DOES NOT INCLUDE HOSE ADAPTERS) .............................................3262-2 HYDRAULIC CONTROL VALVE COMPONENTS ....................3262-2 HYDRAULIC CONTROL VALVE SPOOL SEAL KIT.................3262-2 HYDRAULIC CYLINDER PISTON, ANGLE..............................3265-2 HYDRAULIC CYLINDER PISTON, LIFT...................................3265-4 HYDRAULIC CYLINDER PISTON, TILT ...................................3265-6 HYDRAULIC CYLINDER PLUMBING, TILT .............................3263-4 HYDRAULIC CYLINDER, ANGLE ............................................3265-2 HYDRAULIC CYLINDER, LIFT.................................................3265-4 HYDRAULIC CYLINDER, TILT .................................................3265-6 HYDRAULIC FILTER BRACKET...............................................2164-4 HYDRAULIC FILTER HEAD .....................................................2164-4 HYDRAULIC FILTER HOSE .....................................................2163-6 HYDRAULIC FLUID SIGHT LABEL..........................................1322-2 HYDRAULIC HOSE, VALVE TO FILTER ..................................2163-6 HYDRAULIC HOSES, ANGLE..................................................3263-6 HYDRAULIC HOSES, RIPPER...............................................3263-10 HYDRAULIC HOSES, TILT PLUMBING ...................................3263-4 HYDRAULIC LIFT HOSES .......................................................3263-2 HYDRAULIC LINKAGE BOOT ..................................................3215-2 HYDRAULIC MOTOR TO HYDROSTATIC PUMP HOSES.................................................................................0363-4 HYDRAULIC OIL COOLER ......................................................0511-2 HYDRAULIC OIL FILTER..........................................................2164-4 HYDRAULIC OIL TEMPERATURE SENSOR...........................1678-2 HYDRAULIC PLUMBING, BLADE............................................3263-8 HYDRAULIC PRESSURE HOSE .............................................2163-4 HYDRAULIC PUMP COUPLING ..............................................2161-2 HYDRAULIC PUMP DRIVE THRU GASKET KIT .....................2161-4 HYDRAULIC PUMP GASKET KIT............................................2161-2 HYDRAULIC PUMP REPAIR KIT .............................................2161-4 HYDRAULIC PUMP TO CONTROL VALVE, PRESSURE HOSE ..............................................................2163-4 HYDRAULIC PUMP, STANDARD .............................................2161-2 HYDRAULIC PUMP, WITH DRIVE THRU SHAFT....................2161-4 HYDRAULIC RESERVOIR........................................................2164-2 HYDRAULIC RESERVOIR COVER ..........................................2164-2

HYDRAULIC RESERVOIR DOOR ........................................... 2164-2 HYDRAULIC RESERVOIR DOOR LATCH............................... 2164-2 HYDRAULIC RESERVOIR FILLER PLUG............................... 2164-2 HYDRAULIC RESERVOIR SIGHT GAUGE ............................. 2164-2 HYDRAULIC SIGHT LABEL .................................................... 2164-2 HYDRAULIC SIX WAY BLADE LABEL .................................... 1322-2 HYDRAULIC SIX WAY BLADE LABEL (S/N -XXXXXX).................................................................... 1810-4 HYDRAULIC SIX WAY BLADE LABEL (S/N XXXXXX- )................................................................. 1810-5A HYDRAULIC SUCTION HOSE ................................................ 2163-2 HYDRAULIC TANK DRAIN VALVE ........................................ 2163-10 HYDRAULIC TANK TO HYDRAULIC PUMP SUCTION HOSE .................................................................................. 2163-2 HYDRAULIC 6-WAY BLADE LABEL........................................ 1810-2 HYDROSTATIC AND HYDRAULIC OIL TANK 10W30 OIL DESIGNATION LABEL ................................................. 1322-2 HYDROSTATIC CAGE LOCATOR LINK ................................ 0355-12 HYDROSTATIC CHARGE HOUSING ...................................... 0355-8 HYDROSTATIC CHARGE RELIEF VALVE .............................. 0355-2 HYDROSTATIC CHARGE RELIEF VALVE PLUG.................... 0355-6 HYDROSTATIC CYLINDER BLOCK ASSEMBLY WITH SPEED RING .................................................................... 0355-12 HYDROSTATIC CYLINDER BLOCK KIT WITH SPEED RING .................................................................... 0355-12 HYDROSTATIC ELECTRONIC DISPLACEMENT CONTROL VALVE ............................................................... 0355-2 HYDROSTATIC END CAP ASSEMBLY ................................... 0355-8 HYDROSTATIC END CAP GASKET........................................ 0355-8 HYDROSTATIC END CAP GASKET...................................... 0355-20 HYDROSTATIC FILTER ADAPTER.......................................... 0355-2 HYDROSTATIC FILTER HOSES............................................ 0363-12 HYDROSTATIC FILTER SCREEN ........................................... 0355-6 HYDROSTATIC FILTRATION MANIFOLD KIT ......................... 0355-4 HYDROSTATIC FRONT AND REAR PUMP COUPLING.......................................................................... 0355-4 HYDROSTATIC HOSES, PUMP TO MOTOR .......................... 0363-4 HYDROSTATIC MOTOR DRAIN HOSE ................................. 0363-10 HYDROSTATIC MOTOR SYNCH SHAFT KIT ....................... 0355-18 HYDROSTATIC MOTOR VALVE ............................................ 0355-22 HYDROSTATIC MOTOR, AXIAL PISTON.............................. 0355-16 HYDROSTATIC MOTORS, RIGHT AND LEFT HAND ........... 0355-16 HYDROSTATIC MULTI FUNCTION VALVE ............................. 0355-2 HYDROSTATIC MULTI FUNCTION VALVE ............................. 0355-6 HYDROSTATIC OIL COOLER ................................................. 0511-2 HYDROSTATIC OIL COOLER BYPASS VALVE .................... 0363-10 HYDROSTATIC PUMP BEARING.......................................... 0355-12 HYDROSTATIC PUMP CHARGING SYSTEM......................... 0355-4 HYDROSTATIC PUMP COMPONENTS .................................. 0355-2 HYDROSTATIC PUMP COMPRESSION SPRING ................ 0355-10 HYDROSTATIC PUMP DISPLACEMENT CONTROL VALVE................................................................................ 0355-14 HYDROSTATIC PUMP FILTRATION MANIFOLD .................... 0355-4 HYDROSTATIC PUMP FRONT SHAFT................................... 0355-2 HYDROSTATIC PUMP LEVELOR ......................................... 0355-10 HYDROSTATIC PUMP PRESSURE CONTROL PILOT VALVE................................................................................ 0355-14 HYDROSTATIC PUMP RETAINING PLATE............................. 0355-6 HYDROSTATIC PUMP SHAFT .............................................. 0355-10 HYDROSTATIC PUMP SHAFT ROLLER BEARING.............. 0355-10 HYDROSTATIC PUMP SIDE COVER ...................................... 0355-2 HYDROSTATIC PUMP SLIPPER GUIDE .............................. 0355-12 HYDROSTATIC PUMP SPEED RING.................................... 0355-12 HYDROSTATIC PUMP SWASHPLATE GUIDE...................... 0355-12 HYDROSTATIC PUMP TO MOTOR HOSES ........................... 0363-4 HYDROSTATIC REAR PUMP .................................................. 0355-2 HYDROSTATIC REAR PUMP LIFTING BRACKET ................. 0355-8

700J CRAWLER DOZER (S.N. -139435)

PC9473

(13-APR-07)

000I-13 PN=13


000I-14 700J CRAWLER DOZER (S.N. -139435)

ALPHABETICAL INDEX - CONTINUED PAGE

HYDROSTATIC REAR PUMP SHAFT ......................................0355-2 HYDROSTATIC RESERVOIR ...................................................0364-4 HYDROSTATIC RESERVOIR ACCESS COVER PLATE ..........0364-4 HYDROSTATIC RESERVOIR COVER......................................0364-4 HYDROSTATIC RESERVOIR DOOR........................................0364-4 HYDROSTATIC RESERVOIR DOOR HINGE ...........................0364-4 HYDROSTATIC RESERVOIR DOOR LATCH ...........................0364-4 HYDROSTATIC RESERVOIR SIGHT GAUGE LABEL .............0364-4 HYDROSTATIC RESERVOIR, CLEAN OUT COVER ...............0364-4 HYDROSTATIC RESERVOIR, NO WELDING LABEL ..............0364-4 HYDROSTATIC SERVO ARM .................................................0355-12 HYDROSTATIC SERVO CAN CYLINDER ................................0355-2 HYDROSTATIC SERVO PISTON KIT .....................................0355-10 HYDROSTATIC SHAFT SEAL ASSEMBLY ..............................0355-6 HYDROSTATIC SIDE COVER INSERT ..................................0355-10 HYDROSTATIC SPEED SENSOR............................................0355-2 HYDROSTATIC SPEED SENSOR............................................0355-6 HYDROSTATIC SUCTION HOSE.............................................0363-8 HYDROSTATIC TANK DRAIN VALVE .....................................2163-10 HYDROSTATIC TRACK DRIVE MOTOR ................................0355-18 HYDROSTATIC TRACK DRIVE MOTOR CONTROL MOTOR ..............................................................................0355-22 HYDROSTATIC TRACK DRIVE MOTOR END CAP AND FEEDBACK SPRING.................................................0355-20 HYDROSTATIC TRACK DRIVE MOTOR MAGNETIC RING SPEED SENSOR ON SHAFT..................................0355-18 HYDROSTATIC VARIABLE SWASHPLATE ............................0355-12 HYDROSTATIC WELDED PISTON ASSEMBLY.....................0355-12 HYDROSTATIC/TRANSMISSION DIAGNOSTIC PLUMBING...........................................................................0363-6 HYDROSTATIC/TRANSMISSION FILTER................................0364-2 HYDROSTATIC/TRANSMISSION SPEED SELECTOR SOLENOID.........................................................................0355-22 HYDROSTATIC/TRANSMISSION TESTING LABEL ................0363-6

I IDLER GEAR ............................................................................0404-4 IDLER GUIDE ...........................................................................0133-8 IDLER WITH BRACKETS .........................................................0133-8 IDLER YOKE, TRACK CHAIN TENSION ADJUSTER .............0133-8 IDLER, SHAFT..........................................................................0133-8 IDLER, TRACK CHAIN .............................................................0133-8 IN-CHASSIS OVERHAUL GASKET KIT, ENGINE ...................0452-1 INJECTION PUMP, FUEL .........................................................0413-2 INLET VALVE ............................................................................3262-2 INLET, WATER PUMP ..............................................................0417-1 INPUT GEAR, FINAL DRIVE....................................................0201-2 INPUT GEAR, FINAL DRIVE....................................................0201-4 INSIDE DOZER ANGLE PLUMBING .......................................3263-6 INSIDE DOZER LIFT PLUMBING ............................................3263-2 INTAKE MANIFOLD (VSN 920839- ) (PE6068TT060)....................................................................0414-1 INTAKE VALVE, ENGINE..........................................................0409-2 INTAKE, ENGINE OIL PUMP ...................................................0407-4 ISOLATOR RADIATOR MOUNTS.............................................0511-2 ISOLATOR, CAB NOISE REDUCTION FOAM .........................1807-2 ISOLATOR, CAB NOISE REDUCTION FOAM .........................1807-4 ISOLATOR, POWER TRAIN RUBBER .....................................0540-2 ISOLATOR, TRANSMISSION ...................................................0325-2 ISOLATORS AND MOUNTS, CAB............................................1811-6 ISOLATORS AND MOUNTS, ROPS.........................................1811-6 ISOLATORS, FLOOR PLATE....................................................1810-8

000I-14

PAGE

J JACK SCREW, CAB................................................................. 1811-4 JACK SCREW, ROPS .............................................................. 1811-2 JET, PISTON COOLING .......................................................... 0404-2

K KEY .......................................................................................... 1676-2 KEY START LABEL, CAB (S/N -XXXXXX).................................................................... 1810-4 KEY START LABEL, CAB (S/N XXXXXX- )................................................................. 1810-5A KEY START LABEL, ROPS ..................................................... 1810-2 KEY SWITCH........................................................................... 1676-2 KIT, AIR CONDITIONER, FIELD.............................................. 1832-2 KIT, BRAKE VALVE .................................................................. 1062-2 KIT, CAB NOISE REDUCTION FOAM..................................... 1807-4 KIT, CYL. LINER O-RING (PE6068TT060) (VSN 920839- ).................................................................... 0403-1 KIT, CYLINDER BLOCK WITH SPEED RING ....................... 0355-12 KIT, ENGINE OVERHAUL (PE6068TT060) (VSN 920839- ).................................................................... 0403-1 KIT, FINAL DRIVE DRAIN PLUG GUARDS............................. 0201-6 KIT, FINAL DRIVE GUARD (LGP) ......................................... 0131-12 KIT, FINAL FUEL FILTER DRAIN VALVE................................. 0420-4 KIT, FINAL FUEL FILTER SEAL .............................................. 0420-4 KIT, FRENCH OR SPANISH LABELS AND DECALS .............................................................................. 1322-4 KIT, FUEL FIRED COOLANT HEATER.................................... 0505-8 KIT, FUEL HEATER.................................................................. 0420-4 KIT, HYDRAULIC PUMP REPAIR KIT ..................................... 2161-4 KIT, HYDROSTATIC FILTRATION MANIFOLD ........................ 0355-4 KIT, HYDROSTATIC SERVO PISTON.................................... 0355-10 KIT, LUMBAR (DELUXE AND AIR SUSPENSION) ............... 1821-28 KIT, PRIMARY FUEL FILTER DRAIN VALVE........................... 0420-2 KIT, PRIMARY FUEL FILTER HEADER................................... 0420-2 KIT, PRIMARY FUEL FILTER SEAL ........................................ 0420-2 KIT, ROCK DEFLECTOR ....................................................... 0131-10 KIT, ROTARY SENSOR, TRANSMISSION CONTROL LEVER................................................................................. 0315-2 KIT, SEAT RECLINER ............................................................ 1821-30 KIT, SLIDE LATCH (ALL SEATS) ........................................... 1821-10 KIT, STARTING MOTOR SOLENOID....................................... 0422-2 KNEE PAD ............................................................................. 1810-12 KNOB, LUMBAR (DELUXE AND AIR SUSPENSION) .......... 1821-28 KNOB, RECLINER ................................................................. 1821-30 KNOB, RERVERSE RATIO ...................................................... 1676-2 KNOB, WEIGHT ADJUSTMENT (DELUXE).......................... 1821-16

L LABEL (FRENCH AND SPANISH)........................................... 1322-4 LABEL, CAB FUSE BLOCK (S/N -XXXXXX).................................................................... 1810-4 LABEL, CAB FUSE BLOCK (S/N XXXXXX- )................................................................. 1810-5A LABEL, CAB HIGH INTENSITY WORK LIGHTS..................... 1673-6 LABEL, CAUTION AND START (S/N -XXXXXX).................................................................... 1810-4 LABEL, CAUTION AND START (S/N XXXXXX- )................................................................. 1810-5A LABEL, DISCONNECT ............................................................ 1322-2 LABEL, ENGINE SPEED-REVERSE (S/N -XXXXXX).................................................................... 1810-4

700J CRAWLER DOZER (S.N. -139435)

PC9473

(13-APR-07) PN=14


000I-15 700J CRAWLER DOZER (S.N. -139435)

ALPHABETICAL INDEX - CONTINUED PAGE

PAGE

LABEL, ENGINE SPEED-REVERSE (S/N XXXXXX- ) ................................................................ 1810-5A LABEL, ENGINE SPEED, CAB (S/N -XXXXXX) ....................................................................1810-4 LABEL, ENGINE SPEED, CAB (S/N XXXXXX- ) ................................................................ 1810-5A LABEL, ENGINE SPEED, ROPS ..............................................1810-2 LABEL, FORWARD, NEUTRAL AND REVERSE .....................1322-2 LABEL, FORWARD, NEUTRAL, AND REVERSE ....................0315-2 LABEL, FUSE BLOCK ..............................................................1674-4 LABEL, FUSE BLOCK ..............................................................1674-6 LABEL, GRAY CIRCLE.............................................................1810-2 LABEL, GROUND SPEED........................................................0315-2 LABEL, HYDRAULIC FLUID SIGHT.........................................1322-2 LABEL, HYDRAULIC SIGHT ....................................................2164-2 LABEL, HYDRAULIC SIX WAY BLADE ....................................1322-2 LABEL, HYDRAULIC SIX WAY BLADE (S/N -XXXXXX) ....................................................................1810-4 LABEL, HYDRAULIC SIX WAY BLADE (S/N XXXXX- )................................................................... 1810-5A LABEL, HYDRAULIC 6-WAY BLADE........................................1810-2 LABEL, HYDROSTATIC AND HYDRAULIC OIL TANK 10W30 OIL DESIGNATION........................................1322-2 LABEL, HYDROSTATIC RESERVOIR SIGHT GAUGE ............0364-4 LABEL, HYDROSTATIC RESERVOIR, NO WELDING .............0364-4 LABEL, KEY START, CAB (S/N -XXXXXX) ....................................................................1810-4 LABEL, KEY START, CAB (S/N XXXXXX- ) ................................................................ 1810-5A LABEL, KEY START, ROPS......................................................1810-2 LABEL, LEAPING DEERE........................................................1322-2 LABEL, LGP..............................................................................1322-2 LABEL, LONG TRACK..............................................................1322-2 LABEL, LOW GROUND PRESSURE .......................................1322-2 LABEL, MASTER DISCONNECT SWITCH ..............................1671-2 LABEL, PARK LOCK.................................................................1322-2 LABEL, PARK LOCK.................................................................1810-2 LABEL, PARK LOCK (S/N -XXXXXX) ....................................................................1810-4 LABEL, PARK LOCK (S/N XXXXXX- ) ................................................................ 1810-5A LABEL, REVERSE RATIO-ENGINE SPEED ............................1810-2 LABEL, REVERSE SPEED (S/N -XXXXXX) ....................................................................1810-4 LABEL, REVERSE SPEED (S/N XXXXXX- ) ................................................................ 1810-5A LABEL, ROPS...........................................................................1810-2 LABEL, ROPS (S/N -XXXXXX) ....................................................................1810-4 LABEL, ROPS (S/N XXXXXX- ) ................................................................ 1810-5A LABEL, SAFETY START PROCEDURE...................................1810-2 LABEL, SAFETY START PROCEDURE (S/N -XXXXXX) ....................................................................1810-4 LABEL, SAFETY START PROCEDURE (S/N XXXXXX- ) ................................................................ 1810-5A LABEL, SEAT BASE TILT PROCEDURE .................................1810-2 LABEL, SEAT BASE TILT PROCEDURE (S/N -XXXXXX) ....................................................................1810-4 LABEL, SEAT BASE TILT PROCEDURE (S/N XXXXXX- ) ................................................................ 1810-5A LABEL, SEAT BELT WARNING ................................................1322-2 LABEL, SEAT BELT WARNING ................................................1810-2 LABEL, SEAT BELT WARNING (S/N -XXXXXX) ....................................................................1810-4 LABEL, SEAT BELT WARNING (S/N XXXXXX- ) ................................................................ 1810-5A

LABEL, TIE DOWN .................................................................. 1322-2 LABEL, TRACK SAG ............................................................... 1322-2 LABEL, TRANSMISSION FLUID SIGHT ................................. 1322-2 LABEL, TRANSMISSION/HYDROSTATIC TESTING .............. 0363-6 LABEL, XLT.............................................................................. 1322-2 LABEL, 700J ............................................................................ 1322-2 LABELS AND DECALS (ENGLISH) ........................................ 1322-2 LATCH LEVER, DOOR ............................................................ 1813-2 LATCH, CAB DOOR................................................................. 1813-2 LATCH, CAB DOOR HOLD OPEN .......................................... 1813-4 LATCH, HYDRAULIC RESERVOIR DOOR.............................. 2164-2 LATCH, HYDROSTATIC RESERVOIR DOOR ......................... 0364-4 LATCH, STRIKER AND GUARD, CAB DOOR ......................... 1813-2 LATCHES, CAB DOOR ............................................................ 1813-2 LEAPING DEERE LABEL ........................................................ 1322-2 LEFT AND RIGHT HAND HYDROSTATIC MOTORS ............ 0355-16 LEFT RAIL ASSEMBLY, POWER TRAIN MOUNTING ......................................................................... 0540-2 LEFT SIDE WINDOW .............................................................. 1814-2 LEVELOR, HYDROSTATIC PUMP ........................................ 0355-10 LEVER ASSEMBLY, SPEED.................................................... 0315-2 LEVER CONTROL WITH SPEED IN GRIP, SINGLE............... 0315-2 LEVER, DOOR LATCH ............................................................ 1813-2 LEVER, PARK LOCK ............................................................... 1115-4 LEVER, TRANSMISSION CONTROL, WITH SPEED IN GRIP ............................................................................... 0315-2 LGP FINAL DRIVE GUARD KIT ............................................ 0131-12 LGP LABEL.............................................................................. 1322-2 LGP TRACK FRAME ............................................................... 0131-2 LIFT CYLINDER BORE SEAL KIT........................................... 3265-4 LIFT CYLINDER HEAD END PIN ............................................ 3265-4 LIFT CYLINDER PLUMBING................................................... 3263-2 LIFT CYLINDER ROD END PIN .............................................. 3243-2 LIFT CYLINDER ROD SEAL KIT ............................................. 3265-4 LIFT CYLINDER, HYDRAULIC ................................................ 3265-4 LIFT HOSES ............................................................................ 3263-2 LIFT PLUMBING, DOZER ....................................................... 3263-2 LIFT STRAP, ENGINE.............................................................. 0409-4 LIFTING BRACKET, HYDROSTATIC REAR PUMP................. 0355-8 LIGHT AND BULB, DOME (S/N -XXXXXX).................................................................... 1810-6 LIGHT BRACKET..................................................................... 1673-4 LIGHT BRACKET, CAB HI-INTENSITY ................................... 1673-6 LIGHT BULB ............................................................................ 1673-4 LIGHT BULB, CAB HI-INTENSITY .......................................... 1673-6 LIGHT CIRCUIT BREAKER..................................................... 1673-4 LIGHT CIRCUIT BREAKER, CAB HI-INTENSITY................... 1673-6 LIGHT HARNESS GUARD ...................................................... 1673-4 LIGHT HARNESS, ROPS WIRING.......................................... 1673-4 LIGHT ON-OFF SWITCH......................................................... 1676-2 LIGHT TOGGLE/ROCKER SWITCH, CAB.............................. 1673-6 LIGHT TOGGLE/ROCKER SWITCH, ROPS ........................... 1673-4 LIGHT WIRING HARNESS, CAB WORK ................................ 1673-6 LIGHT, HOUSING, WORK LIGHTS ......................................... 1673-4 LIGHTER, CIGAR .................................................................... 2006-2 LIGHTS, CAB HI-INTENSITY .................................................. 1673-6 LIGHTS, DRIVING ................................................................... 1673-2 LIGHTS, ROPS HI-INTENSITY................................................ 1673-4 LIGHTS, WORK ....................................................................... 1673-2 LINE, TURBOCHARGER OIL.................................................. 0416-2 LINER, CYLINDER (PE6068TT060 (VSN 920839- ).................................................................... 0403-1 LINES, FUEL............................................................................ 0563-2 LINES, FUEL FILTER............................................................... 0420-6 LINES, FUEL INJECTION........................................................ 0413-2 LINES, HYDROSTATIC FILTER ............................................. 0363-12 LINK, HYDROSTATIC CAGE LOCATOR ............................... 0355-12

700J CRAWLER DOZER (S.N. -139435)

PC9473

(13-APR-07)

000I-15 PN=15


000I-16 700J CRAWLER DOZER (S.N. -139435)

ALPHABETICAL INDEX - CONTINUED PAGE

PAGE

LINK, TRACK, LUBED ..............................................................0132-2 LINK, TRACK, LUBED (CONTINUED) .....................................0132-4 LINKAGE BOOT, HYDRAULIC .................................................3215-2 LINKAGE, AUXILIARY VALVE (FOURTH FUNCTION) ........................................................3262-4 LINKAGE, AUXILIARY VALVE WITH (FIFTH FUNCTION) .............................................................3262-6 LINKAGE, HYDRAULIC CONTROL .........................................3215-2 LOCK, PARK .............................................................................1115-4 LOGO PLATE, GRILLE .............................................................1921-2 LONG TRACK LABEL...............................................................1322-2 LOOP FLUSHING PISTON, HYDROSTATIC TRACK DRIVE MOTOR END CAP .................................................0355-20 LOUVERS (S/N -XXXXXX) ....................................................................1810-6 LOUVERS, CAB (S/N -XXXXXX) ....................................................................1810-6 LOUVERS, DEFROST (S/N -XXXXXX) ....................................................................1810-6 LOW AND HIGH PRESSURE AIR CONDITIONING REFRIGERANT HOSES ......................................................1832-4 LOW GROUND PRESSURE AND X-LONG TRACK ROCK GUARDS...................................................................0131-6 LOW GROUND PRESSURE BOLT ON CROSSBAR SUPPORT ............................................................................0131-2 LOW GROUND PRESSURE C-FRAME...................................3243-2 LOW GROUND PRESSURE LABEL ........................................1322-2 LOW GROUND PRESSURE REAR ROCK GUARDS..............0131-8 LOW GROUND PRESSURE TRACK FRAME..........................0131-2 LOW PRESSURE HYDRAULIC HOSE ....................................2163-2 LOW PRESSURE HYDRAULIC HOSES ..................................0363-8 LOW PRESSURE SWITCH, AIR CONDITIONING ..................1832-2 LOWER DASH PANEL..............................................................1810-2 LOWER DASH PANEL PLATE..................................................1810-2 LUBE HOSE, CROSSBAR .......................................................1743-2 LUBRICATION HOSE, CROSSBAR C-FRAME........................1743-6 LUBRICATION HOSES, C-FRAME ..........................................3243-2 LUMBAR KIT (DELUXE AND AIR SUSPENSION) ................1821-28 LUMBAR KNOB (DELUXE AND AIR SUSPENSION) ............1821-28 LUNCH BOX AND CUP TRAY................................................1810-12

METAL FACE SEAL, TRACK CHAIN IDLER ........................... 0133-8 MICROPROCESSOR COVER................................................. 0375-2 MICROPROCESSOR TRANSMISSION CONTROLLER ........ 0375-2 MICROPROCESSOR TRANSMISSION CONTROLLER GROUND STRAP................................................................ 0375-2 MIRROR BRACKET, REAR ................................................... 1810-14 MIRROR, REAR..................................................................... 1810-14 MIRROR, REAR VIEW............................................................. 1810-2 MIRROR, REAR VIEW........................................................... 1810-12 MIRROR, REAR VIEW (S/N -XXXXXX).................................................................... 1810-4 MIRROR, REAR VIEW (S/N XXXXXX- )................................................................. 1810-5A MOISTURE SENSOR, PRIMARY FUEL FILTER..................... 0578-2 MOLDING, EDGE GUARD, TILT PLUMBING.......................... 3263-4 MONITOR ALARM, 12 VOLT WITH SHUTTER ....................... 1676-2 MONITOR AND DASH ............................................................. 1676-2 MOTOR MAGNETIC RING SPEED SENSOR ON SHAFT, HYDROSTATIC TRACK DRIVE ........................... 0355-18 MOTOR, AXIAL PISTON HYDROSTATIC.............................. 0355-16 MOTOR, FRONT AND SIDE WINDOW WIPER ...................... 1814-6 MOTOR, HYDROSTATIC ....................................................... 0355-16 MOTOR, HYDROSTATIC TRACK DRIVE .............................. 0355-18 MOTOR, HYDROSTATIC TRACK DRIVE CONTROL............ 0355-22 MOTOR, REAR WIPER ........................................................... 1814-8 MOTOR, STARTING ................................................................ 0422-2 MOTORS, HYDROSTATIC, RIGHT AND LEFT HAND ................................................................................ 0355-16 MOUNTING BRACKET, HYDRAULIC FILTER HEAD.............. 2164-4 MOUNTING BRACKET, RADIO............................................... 2001-2 MOUNTING PLATE, ROCK DEFLECTOR............................... 0131-2 MOUNTING, POWER TRAIN .................................................. 0540-2 MOUNTS AND ISOLATORS, CAB........................................... 1811-6 MOUNTS AND ISOLATORS, ROPS ........................................ 1811-6 MOUNTS, RADIATOR ISOLATOR ........................................... 0511-2 MUFFLER CHROME EXHAUST STACK ................................. 1911-2 MUFFLER EXHAUST STACK .................................................. 1911-2 MUFFLER, EXHAUST ............................................................. 0531-2

N M MAGNETIC RING SPEED SENSOR ON SHAFT, HYDROSTATIC TRACK DRIVE MOTOR ...........................0355-18 MAIN BEARING, ENGINE ........................................................0401-1 MAIN FRAME ...........................................................................1741-2 MANIFOLD AND DUST COVER, AIR CONDITIONING COMPRESSOR........................................1832-8 MANIFOLD SEAL, A/C COMPRESSOR ..................................1832-8 MANIFOLD, EXHAUST .............................................................0410-1 MANIFOLD, HYDROSTATIC PUMP FILTRATION ....................0355-4 MANIFOLD, INTAKE (VSN 920839- ) (PE6068TT060)....................................................................0414-1 MANUAL HOLDER, OPERATOR..............................................1821-4 MASTER DISCONNECT SWITCH ...........................................1671-2 MASTER DISCONNECT SWITCH CABLE ..............................1671-2 MASTER DISCONNECT SWITCH LABEL ...............................1671-2 MAT, FLOOR ...........................................................................1810-10 MECHANICAL SEAT SUSPENSION (DELUXE) ....................1821-12 MECHANICAL SEAT SUSPENSION (DELUXE) ....................1821-16 MECHANICAL SEAT SUSPENSION (STANDARD) .................1821-6 MECHANICAL SEAT SUSPENSION SHOCK ABSORBER .........................................................................1821-6 MECHANICAL SEAT SUSPENSION SPRING KITS (DELUXE)...........................................................................1821-20

000I-16

NEGATIVE BATTERY CABLE, HEAVY DUTY ......................... 1671-2 NEUTRAL START SWITCH ..................................................... 0315-2 NOISE REDUCTION FOAM/ISOLATOR, CAB ........................ 1807-2 NOZZLE, FUEL INJECTION.................................................... 0413-2 NOZZLE, STARTING AID COLD WEATHER/ ETHER ................................................................................ 0505-2

O OIL ACCESS COVER, MAIN FRAME...................................... 1741-2 OIL COOLER THERMAL BYPASS VALVE ............................ 0363-10 OIL COOLER, ENGINE ........................................................... 0419-2 OIL COOLER, HYDRAULIC..................................................... 0511-2 OIL COOLER, HYDROSTATIC ................................................ 0511-2 OIL DESIGNATION LABEL, HYDROSTATIC AND HYDRAULIC OIL TANK 10W30........................................... 1322-2 OIL FILTER, ENGINE (VSN 920839-)...................................... 0407-5 OIL FILTER, HYDRAULIC........................................................ 2164-4 OIL LINE, TURBOCHARGER.................................................. 0416-2 OIL PRESSURE REGULATING VALVE, ENGINE ................... 0404-2 OIL PRESSURE SENSOR, ENGINE....................................... 1678-2 OIL PRESSURE SENSOR, TRANSMISSION ......................... 1062-2 OIL PUMP, ENGINE ................................................................. 0407-4 OIL SEAL, ENGINE REAR ...................................................... 0433-2

700J CRAWLER DOZER (S.N. -139435)

PC9473

(13-APR-07) PN=16


000I-17 700J CRAWLER DOZER (S.N. -139435)

ALPHABETICAL INDEX - CONTINUED PAGE

PAGE

OIL TANK 10W30 OIL DESIGNATION LABEL, HYDRAULIC AND HYDROSTATIC ......................................1322-2 OIL TEMPERATURE SENSOR, HYDRAULIC..........................1678-2 OPERATOR MANUAL HOLDER...............................................1821-4 OPERATOR MANUAL HOLDER (DELUXE/AIR SUSPENSION)...................................................................1821-14 ORIFICE, PISTON COOLING JET ...........................................0404-2 OUTER HOUSING, FINAL DRIVE ...........................................0201-2 OUTER HOUSING, FINAL DRIVE ...........................................0201-4 OUTLET VALVE ........................................................................3262-2 OVERHAUL GASKET KIT, ENGINE .........................................0452-2 OVERHAUL KIT, ENGINE.........................................................0404-8 OVERHAUL KIT, ENGINE (PE6068TT060) (VSN 920839- ) ....................................................................0403-1 OVERHEAD CONTROL PANEL, ELECTRONIC SWITCH (S/N -XXXXXX) .....................................................1810-6

PISTON RINGS (PE6068TT060) (VSN 920839- ).................................................................... 0403-1 PISTON, FINAL DRIVE BRAKE PISTON ................................ 0201-2 PISTON, FINAL DRIVE BRAKE PISTON ................................ 0201-4 PISTON, HYDRAULIC CYLINDER, ANGLE ............................ 3265-2 PISTON, HYDRAULIC CYLINDER, LIFT................................. 3265-4 PISTON, HYDRAULIC CYLINDER, TILT ................................. 3265-6 PISTON, TRACK CHAIN TENSION ADJUSTER..................... 0133-8 PITCH JACK PIN, C-FRAME END .......................................... 3243-2 PIVOT BALL, C-FRAME........................................................... 3243-2 PIVOT SHAFT CAP.................................................................. 1743-4 PIVOT SHAFTS........................................................................ 1743-4 PLATE, AIR CONDITIONER REAR COVER (S/N -XXXXXX).................................................................... 1810-4 PLATE, AIR CONDITIONER REAR COVER (S/N XXXXXX- )................................................................. 1810-5A PLATE, AIR CONDITIONER SIDE COVER (S/N -XXXXXX).................................................................... 1810-4 PLATE, AIR CONDITIONER SIDE COVER (S/N XXXXXX- )................................................................. 1810-5A PLATE, AIR FILTER COVER (S/N -XXXXXX).................................................................... 1810-4 PLATE, AIR FILTER COVER (S/N XXXXXX- )................................................................. 1810-5A PLATE, ARMREST (DELUXE/AIR SUSPENSION) ............... 1821-14 PLATE, BACKING UNDER SEAT, CAB ONLY ......................... 1831-2 PLATE, BATTERY HOLDDOWN, HEAVY DUTY ..................... 1671-2 PLATE, BULKHEAD, TILT CYLINDER PLUMBING ................. 3263-4 PLATE, CAB............................................................................. 1810-8 PLATE, FRONT ........................................................................ 0404-4 PLATE, FUSE COVER, CAB (S/N -XXXXXX).................................................................... 1810-4 PLATE, FUSE COVER, CAB (S/N XXXXXX- )................................................................. 1810-5A PLATE, FUSE COVER, ROPS ................................................. 1810-2 PLATE, GRILLE LOGO ............................................................ 1921-2 PLATE, LOWER DASH PANEL, CAB (S/N -XXXXXX).................................................................... 1810-4 PLATE, LOWER DASH PANEL, CAB (S/N XXXXXX- )................................................................. 1810-5A PLATE, LOWER DASH PANEL, ROPS.................................... 1810-2 PLATE, RADIATOR COVER..................................................... 1921-2 PLATE, RADIO BLANKING (S/N -XXXXXX).................................................................... 1810-6 PLATE, RETAINING, HYDROSTATIC PUMP........................... 0355-6 PLATE, RETRIEVAL HITCH..................................................... 1511-4 PLATE, ROPS .......................................................................... 1810-8 PLATE, SEAT BASE (MOUNTING BRACKET/RISER) .............................................................. 1821-4 PLATE, SINGLE LEVER CONTROL MOUNTING ................... 0315-2 PLATE, TRANSMISSION CONTROL LEVER.......................... 0315-2 PLATE, TRANSMISSION CONTROL LEVER MOUNTING ......................................................................... 0315-2 PLUG, HYDRAULIC RESERVOIR FILLER.............................. 2164-2 PLUG, HYDROSTATIC CHARGE RELIEF VALVE................... 0355-6 PLUG, REAR WINDOW........................................................... 1814-2 PLUG, WINDOW...................................................................... 1814-2 PLUMBING (HIGH AND LOW PRESSURE REFRIGERANT HOSES) AIR CONDITIONING ................. 1832-4 PLUMBING, ANGLE CYLINDER ............................................. 3263-6 PLUMBING, BLADE HYDRAULIC ........................................... 3263-8 PLUMBING, CAB HEATER...................................................... 1831-6 PLUMBING, HYDRAULIC TILT HOSES .................................. 3263-4 PLUMBING, HYDROSTATIC/TRANSMISSION DIAGNOSTIC ...................................................................... 0363-6 PLUMBING, LIFT CYLINDER.................................................. 3263-2 PLUMBING, ROPS SEAT BASE HEATER............................... 1831-4

P PACKING KITS, ANGLE CYLINDER ........................................3265-2 PAD, KNEE..............................................................................1810-12 PAD, SEAT BACK......................................................................1821-2 PAN,ENGINE OIL .....................................................................0407-2 PANEL, ELECTRONIC SWITCH OVERHEAD CONTROL (S/N -XXXXXX)..................................................1810-6 PANEL, LOWER DASH, CAB (S/N -XXXXXX) ....................................................................1810-4 PANEL, LOWER DASH, CAB (S/N XXXXXX- ) ................................................................ 1810-5A PANEL, LOWER DASH, ROPS.................................................1810-2 PARK BRAKE LOCK LEVER ....................................................1115-4 PARK BRAKE LOCK SWITCH .................................................1115-4 PARK BRAKE SPRING RETAINER ..........................................0201-2 PARK BRAKE SPRING RETAINER ..........................................0201-4 PARK LOCK ..............................................................................1115-4 PARK LOCK BELLCRANK .......................................................1115-4 PARK LOCK LABEL..................................................................1322-2 PARK LOCK LABEL..................................................................1810-2 PARK LOCK LABEL (S/N -XXXXXX) ....................................................................1810-4 PARK LOCK LABEL (S/N XXXXXX- ) ................................................................ 1810-5A PARK LOCK SUPPORT BRACKET..........................................1115-4 PEDAL, BRAKE ........................................................................1115-2 PERIODIC SERVICE CHART...................................................1322-2 PILOT, PRESSURE CONTROL ..............................................0355-22 PIN, ANGLE CYLINDER, HEAD END ......................................3243-2 PIN, ANGLE CYLINDER, ROD END ........................................3201-2 PIN, CROSSBAR ......................................................................1743-2 PIN, DRAWBAR........................................................................1511-2 PIN, DRAWBAR, 4000S WINCH ..............................................1511-6 PIN, HITCH ...............................................................................1511-2 PIN, LIFT CYLINDER, HEAD END ...........................................3265-4 PIN, LIFT CYLINDER, ROD END .............................................3243-2 PIN, PITCH JACK, C-FRAME END ..........................................3243-2 PIN, QUICK LOCK HITCH ........................................................1511-4 PIN, RETRIEVAL HITCH ..........................................................1511-4 PIN, TILT CYLINDER, HEAD END ...........................................3201-2 PIN, TILT CYLINDER, ROD END .............................................3243-2 PINS, BLADE ............................................................................3201-2 PINS, C-FRAME .......................................................................3243-2 PISTON (LOOP FLUSHING), HYDROSTATIC TRACK DRIVE MOTOR END CAP ....................................0355-20 PISTON (PE6068TT060) (VSN 920839- ) ................................0403-1 PISTON ASSEMBLY, HYDROSTATIC PUMP .........................0355-12 PISTON COOLING JET............................................................0404-2

700J CRAWLER DOZER (S.N. -139435)

PC9473

(13-APR-07)

000I-17 PN=17


000I-18 700J CRAWLER DOZER (S.N. -139435)

ALPHABETICAL INDEX - CONTINUED PAGE

PAGE

PLUMBING, TILT CYLINDER ...................................................3263-4 PLUMBING, TRANSMISSION COOLER BYPASS.................0363-10 POPPET (CHARGE RELIEF), HYDROSTATIC TRACK DRIVE MOTOR END CAP ....................................0355-20 PORT, POWER (12V) ...............................................................2006-2 POSITIVE BATTERY CABLE, HEAVY DUTY ...........................1671-2 POTENTIOMETER ENGINE SPEED SWITCH ........................1676-2 POWER ACCESSORY .............................................................2006-2 POWER CONVERTER, 24V TO 12V (5 AMP) .........................2006-2 POWER CORD, ENGINE COOLANT HEATER ........................0505-4 POWER PORT (12V) ................................................................2006-2 POWER TRAIN BRACKET .......................................................0540-2 POWER TRAIN LEFT RAIL ASSEMBLY ..................................0540-2 POWER TRAIN MOUNTING ....................................................0540-2 POWER TRAIN RIGHT RAIL ASSEMBLY................................0540-2 POWER TRAIN RUBBER ISOLATOR ......................................0540-2 PRESSURE CONTROL PILOT ..............................................0355-22 PRESSURE HOSE, HYDRAULIC ............................................2163-4 PRESSURE HOSE, HYDRAULIC PUMP TO CONTROL VALVE ..................................................................................2163-4 PRESSURE SENSOR, ENGINE OIL .......................................1678-2 PRIMARY FUEL FILTER LINES ...............................................0563-2 PTO SHAFT COVER ................................................................2161-4 PULLEY, AIR CONDITIONING COMPRESSOR ......................1832-6 PULLEY, ALTERNATOR............................................................1672-2 PULLEY, CRANKSHAFT ..........................................................0429-1 PULLEY, FAN............................................................................0512-2 PULLEY, FAN DRIVE................................................................0429-2 PULLEY, TENSIONER..............................................................0429-2 PULLEY, WATER PUMP ...........................................................0417-1 PUMP CHARGING SYSTEM, HYDROSTATIC.........................0355-4 PUMP COMPONENTS, HYDROSTATIC ..................................0355-2 PUMP PULLEY AND INLET, WATER .......................................0417-1 PUMP REPAIR KIT, HYDRAULIC .............................................2161-4 PUMP TO CONTROL VALVE, HYDRAULIC PRESSURE HOSE ..............................................................2163-4 PUMP, DRIVE THRU, SUCTION HOSE ...................................2163-8 PUMP, ENGINE OIL..................................................................0407-4 PUMP, FRONT AXIAL PISTON HYDROSTATIC.......................0355-2 PUMP, FUEL INJECTION .........................................................0413-2 PUMP, HYDRAULIC WITH DRIVE THRU SHAFT....................2161-4 PUMP, REAR, HYDROSTATIC .................................................0355-2 PUMP, STANDARD HYDRAULIC .............................................2161-2 PUMP, WATER ..........................................................................0402-4 PUMP, WINDSHIELD WIPER WASHER TANK ........................1814-4 PUMP,FUEL TRANSFER W/STRAIGHT FLEX FITTINGS ...........................................0421-1 PUSH ROD, ENGINE................................................................0402-2

RADIO BLANKING PLATE (S/N -XXXXXX).................................................................... 1810-6 RADIO COVER (S/N -XXXXXX).................................................................... 1810-6 RADIO MOUNTING BRACKET ............................................... 2001-2 RADIO SPEAKERS ................................................................. 2001-2 RADIO WIRING HARNESS ..................................................... 2001-2 RAIL ASSEMBLY, POWER TRAIN MOUNTING ...................... 0540-2 REAR ACCESS COVER, MAIN FRAME ................................. 1741-2 REAR ATTACHMENTS MIRROR........................................... 1810-14 REAR CAB HEADLINER (WITH LOUVERS) (S/N -XXXXXX).................................................................... 1810-6 REAR GUARD ASSEMBLY, MAIN FRAME ............................. 1741-2 REAR MIRROR...................................................................... 1810-14 REAR MIRROR BRACKET.................................................... 1810-14 REAR OIL SEAL, ENGINE ...................................................... 0433-2 REAR ROCK GUARDS............................................................ 0131-8 REAR ROCK GUARDS (LOW GROUND PRESSURE) .......... 0131-8 REAR ROCK GUARDS (X-LONG TRACK) ............................. 0131-8 REAR ROPS HEADLINER....................................................... 1810-2 REAR VIEW MIRROR.............................................................. 1810-2 REAR VIEW MIRROR............................................................ 1810-12 REAR VIEW MIRROR (S/N -XXXXXX).................................................................... 1810-4 REAR VIEW MIRROR (S/N XXXXXX- )................................................................. 1810-5A REAR WINDOW GLASS.......................................................... 1814-2 REAR WINDOW PLUG............................................................ 1814-2 REAR WINDOW WIPER.......................................................... 1814-8 REAR WIPER BLADE.............................................................. 1814-8 REAR WIPER FLOW CONTROL VALVE................................. 1814-8 REAR WIPER MOTOR ............................................................ 1814-8 REAR WIPER MOTOR COVER............................................... 1814-8 REAR WIPER MOTOR WIRING HARNESS............................ 1814-8 REAR WORK LIGHT ............................................................... 1673-2 RECEIVER DRYER, AIR CONDITIONING.............................. 1832-2 RECIRCULATION AIR COVER (S/N -XXXXXX).................................................................... 1810-4 RECIRCULATION AIR COVER (S/N XXXXXX- )................................................................. 1810-5A RECLINER KIT, SEAT ............................................................ 1821-30 RECLINER KNOB, SEAT ....................................................... 1821-30 REFRIGERANT HOSES, AIR CONDITIONING (HIGH AND LOW PRESSURE)........................................... 1832-4 REFRIGERANT HOSES, AIR CONDITIONING CONDENSER...................................................................... 1832-2 REFRIGERANT LINES, AIR CONDITIONING......................... 1832-2 RELAY, ENGINE HARNESS START........................................ 1674-8 RELAY, START, ENGINE WIRING HARNESS ......................... 1674-8 RELAYS, CIRCUIT BREAKER, AND FUSES, CAB ................................................................................... 1674-10 RELAYS, CIRCUIT BREAKER, AND FUSES, ROPS ................................................................................ 1674-12 RELIEF VALVE, AUXILIARY HYDRAULIC VALVE (FIFTH FUNCTION) ............................................................ 3262-6 RELIEF VALVE, AUXILIARY HYDRAULIC VALVE (FOURTH FUNCTION)........................................................ 3262-4 REPAIR KIT, HYDRAULIC PUMP ............................................ 2161-4 RESERVOIR CAP, WASHER FLUID........................................ 1814-4 RESERVOIR FILLER PLUG, HYDRAULIC.............................. 2164-2 RESERVOIR TO HYDRAULIC PUMP SUCTION HOSE ......... 2163-2 RESERVOIR, HYDRAULIC...................................................... 2164-2 RESERVOIR, HYDROSTATIC ................................................. 0364-4 RESERVOIR, WINDSHIELD WIPER WASHER ...................... 1814-4 RESISTOR CAB HEATER, ELECTRICAL (UPPER).............................................................................. 1831-8 RESISTOR, CAN TERMINATION ............................................ 1674-4

Q QUICK-CONNECT COUPLER, BRAKE HOSES......................0363-2

R RADIATOR ................................................................................0511-2 RADIATOR CAP........................................................................0511-2 RADIATOR COVER PLATE ......................................................1921-2 RADIATOR DRAIN COCK ........................................................0511-2 RADIATOR DRAIN VALVE ........................................................0511-2 RADIATOR FAN SHIELD ..........................................................0511-2 RADIATOR FAN SHROUD........................................................0511-2 RADIATOR ISOLATOR MOUNTS.............................................0511-2 RADIATOR RECOVERY TANK .................................................0511-2 RADIO.......................................................................................2001-2

000I-18

700J CRAWLER DOZER (S.N. -139435)

PC9473

(13-APR-07) PN=18


000I-19 700J CRAWLER DOZER (S.N. -139435)

ALPHABETICAL INDEX - CONTINUED PAGE

PAGE

RESISTOR, CAN TERMINATION.............................................1674-8 RESISTOR, WATER VALVE (UPPER)...............................................................................1831-8 RETAINER SPINDLE VALVE SEGMENT, HYDROSTATIC MOTOR ....................................................0355-18 RETAINER, PARK BRAKE SPRING .........................................0201-2 RETAINER, PARK BRAKE SPRING .........................................0201-4 RETRIEVAL HITCH ..................................................................1511-4 RETRIEVAL HITCH, PIN ..........................................................1511-4 REVERSE RATIO KNOB ..........................................................1676-2 REVERSE RATIO SWITCH ......................................................1676-2 REVERSE RATIO SWITCH FOR SINGLE LEVER CONTROL WITH SPEED IN GRIP ......................................0315-2 REVERSE RATIO SWITCH FOR TRANSMISSION CONTROL LEVER ...............................................................0315-2 REVERSE SPEED LABEL (S/N -XXXXXX) ....................................................................1810-4 REVERSE SPEED LABEL (S/N XXXXXX- ) ................................................................ 1810-5A REVERSE-RATIO ENGINE SPEED LABEL .............................1810-2 REVERSE-RATIO ENGINE SPEED LABEL (S/N -XXXXXX) ....................................................................1810-4 REVERSE-RATIO ENGINE SPEED LABEL (S/N XXXXXX- ) ................................................................ 1810-5A RIGHT AND LEFT HAND HYDROSTATIC MOTORS .............0355-16 RIGHT RAIL ASSEMBLY, POWER TRAIN MOUNTING..........................................................................0540-2 RIGHT SIDE WINDOW.............................................................1814-2 RING GEAR, FLYWHEEL .........................................................0433-1 RING SPEED SENSOR ON SHAFT, HYDROSTATIC TRACK DRIVE MOTOR .....................................................0355-18 RING, HYDROSTATIC PUMP SPEED....................................0355-12 RINGS, PISTON (PE6068TT060) (VSN 920839- ) ....................................................................0403-1 RIPPER HOSES .....................................................................3263-10 RISER, SEAT BASE MOUNTING BRACKET ...........................1821-4 ROCK DEFLECTOR KIT ........................................................0131-10 ROCK DEFLECTOR MOUNTING PLATE.................................0131-2 ROCK DEFLECTORS.............................................................0131-10 ROCK GUARDS .......................................................................0131-4 ROCK GUARDS (LOW GROUND PRESSURE AND X-LONG TRACK) .................................................................0131-6 ROCK GUARDS, REAR............................................................0131-8 ROCK GUARDS, REAR (LOW GROUND PRESSURE) ..........0131-8 ROCK GUARDS, REAR (X-LONG TRACK) .............................0131-8 ROCKER ARM COVER, ENGINE ............................................0402-3 ROCKER ARMS AND SHAFT, ENGINE...................................0402-2 ROCKER SWITCH, CAB HI-INTENSITY LIGHTS....................1673-6 ROCKER SWITCH, ROPS HI-INTENSITY LIGHTS.................1673-4 ROD END PIN, ANGLE CYLINDER .........................................3201-2 ROD END PIN, LIFT CYLINDER ..............................................3243-2 ROD END PIN, TILT CYLINDER ..............................................3243-2 ROD GUIDE, ANGLE CYLINDER ............................................3265-2 ROD GUIDE, LIFT CYLINDER .................................................3265-4 ROD GUIDE, TILT CYLINDER..................................................3265-6 ROD SEAL KIT, ANGLE CYLINDER ........................................3265-2 ROD SEAL KIT, LIFT CYLINDER .............................................3265-4 ROD SEAL KIT, TILT CYLINDER..............................................3265-6 ROD WITH END, ANGLE CYLINDER ......................................3265-2 ROD WITH END, LIFT CYLINDER ...........................................3265-4 ROD WITH END, TILT CYLINDER ...........................................3265-6 ROD, CONNECTING (PE6068TT060) (VSN 920839- ) ....................................................................0403-1 ROD, ENGINE PUSH................................................................0402-2 RODS, VALVE TIE ....................................................................3262-2 ROLLER BEARINGS, CARRIER ..............................................0133-4 ROLLER KIT (DELUXE SEAT) ...............................................1821-18

ROLLER SUPPORT, CARRIER............................................... 0133-4 ROLLER WITH SHAFT, CARRIER .......................................... 0133-4 ROLLERS (SINGLE AND DOUBLE FLANGED) AND COMPONENT PARTS, TRACK........................................... 0133-2 ROPS AND CAB SEAT BASE WITH HEATER UNDER SEAT...................................................................... 1831-2 ROPS AND CAB UNDER SEAT HEATER ............................... 1831-2 ROPS COMPONENTS ............................................................ 1810-2 ROPS FOOTREST................................................................... 1810-8 ROPS FRAME STRUCTURE CONVENIENCE ASSEMBLY.......................................................................... 1811-2 ROPS FUSES AND RELAYS................................................. 1674-12 ROPS FUSES, CIRCUIT BREAKER, AND ELECTRICAL RELAYS...................................................... 1674-12 ROPS GUARDS, LEFT AND RIGHT ....................................... 1741-2 ROPS HEADLINER ................................................................. 1810-2 ROPS HEADLINER FRONT .................................................... 1810-2 ROPS HI-INTENSITY LIGHTS................................................. 1673-4 ROPS LABEL ........................................................................... 1810-2 ROPS LABEL (S/N -XXXXXX).................................................................... 1810-4 ROPS LABEL (S/N XXXXXX- )................................................................. 1810-5A ROPS MOUNTS AND ISOLATORS ......................................... 1811-6 ROPS PARTS........................................................................... 1810-2 ROPS PLATE ........................................................................... 1810-8 ROPS REAR HEADLINER....................................................... 1810-2 ROPS SEAT BASE HEATER PLUMBING................................ 1831-4 ROPS STRUCTURE WELDMENT CONVENIENCE ASSEMBLY.......................................................................... 1811-2 ROPS WIRING HARNESS ...................................................... 1674-6 ROPS WORK LIGHT HARNESS ............................................. 1673-4 ROPS, SEAT BASE.................................................................. 1811-2 ROTARY SENSOR KIT, TRANSMISSION CONTROL LEVER................................................................................. 0315-2 ROTARY SENSOR, DECELERATOR ENGAGEMENT ............ 1115-2 ROTATOR, ENGINE VALVE ..................................................... 0409-2 RUBBER FLOOR MAT........................................................... 1810-10

700J CRAWLER DOZER (S.N. -139435)

PC9473

(13-APR-07)

S SAFETY START PROCEDURE LABEL................................... 1810-2 SAFETY START PROCEDURE LABEL (S/N -XXXXXX).................................................................... 1810-4 SAFETY START PROCEDURE LABEL (S/N XXXXXX- )................................................................. 1810-5A SAND SHIELD ......................................................................... 0511-4 SAND SHIELD DEFLECTOR GRID......................................... 0511-4 SCREW, JACK, CAB................................................................ 1811-4 SCREW, JACK, ROPS ............................................................. 1811-2 SEAL ASSEMBLY, HYDROSTATIC PUMP SHAFT.................. 0355-6 SEAL KIT, A/C COMPRESSOR SHAFT .................................. 1832-9 SEAL KIT, FINAL FUEL FILTER .............................................. 0420-4 SEAL KIT, HYDRAULIC CONTROL VALVE SPOOL ............... 3262-2 SEAL KIT, PRIMARY FUEL FILTER ........................................ 0420-2 SEAL KITS, ANGLE CYLINDER.............................................. 3265-2 SEAL, A/C COMPRESSOR MANIFOLD ................................. 1832-8 SEAL, COWL, HOOD SUPPORT ............................................ 1911-4 SEAL, ENGINE REAR OIL ...................................................... 0433-2 SEAL, FLANGED AXLE SHAFT SEAL.................................... 0201-2 SEAL, FLANGED AXLE SHAFT SEAL.................................... 0201-4 SEAL, FLOOR PLATE.............................................................. 1810-8 SEAL, METAL FACE, TRACK CHAIN IDLER .......................... 0133-8 SEALS, TRACK CHAIN TENSION ADJUSTER ...................... 0133-8 SEAT (DELUXE) .................................................................... 1821-12 SEAT (STANDARD).................................................................. 1821-2

000I-19 PN=19


000I-20 700J CRAWLER DOZER (S.N. -139435)

ALPHABETICAL INDEX - CONTINUED PAGE

PAGE

SEAT ARMREST AND OPERATOR MANUAL HOLDER (DELUXE/AIR SUSPENSION) ...........................................1821-14 SEAT ARMREST, STANDARD..................................................1821-4 SEAT BACK (DELUXE AND AIR SUSPENSION) ..................1821-28 SEAT BACK (DELUXE)...........................................................1821-12 SEAT BACK, CLOTH (AIR SUSPENSION) ............................1821-22 SEAT BACK, VINYL (AIR SUSPENSION) ..............................1821-22 SEAT BASE HEATER PLUMBING, ROPS ...............................1831-4 SEAT BASE PLATE (MOUNTING BRACKET/RISER)..............1821-4 SEAT BASE SPACER, ROPS ...................................................1811-2 SEAT BASE TILT PROCEDURE LABEL ..................................1810-2 SEAT BASE TILT PROCEDURE LABEL (S/N -XXXXXX) ....................................................................1810-4 SEAT BASE TILT PROCEDURE LABEL (S/N XXXXXX- ) ................................................................ 1810-5A SEAT BASE WITH HEATER ROPS AND CAB UNDER SEAT.......................................................................1831-2 SEAT BASE, CAB .....................................................................1811-4 SEAT BASE, ROPS ..................................................................1811-2 SEAT BELT WARNING LABEL .................................................1322-2 SEAT BELT WARNING LABEL .................................................1810-2 SEAT BELT WARNING LABEL (S/N -XXXXXX) ....................................................................1810-4 SEAT BELT WARNING LABEL (S/N XXXXXX- ) ................................................................ 1810-5A SEAT BELT 3 INCH (AIR SUSPENSION)...............................1821-22 SEAT BELT 3 INCH (DELUXE) ...............................................1821-12 SEAT BELT, TWO INCH............................................................1821-2 SEAT HEATER, ROPS AND CAB.............................................1831-2 SEAT HEIGHT ADJUSTMENT KIT (DELUXE) .......................1821-20 SEAT PAD .................................................................................1821-2 SEAT PAD (DELUXE) .............................................................1821-12 SEAT PAD BACK ......................................................................1821-2 SEAT PAD, CLOTH (AIR SUSPENSION) ...............................1821-22 SEAT PAD, VINYL (AIR SUSPENSION) .................................1821-22 SEAT POWER HARNESS (AIR SUSPENSION) ....................1821-24 SEAT RECLINER KIT .............................................................1821-30 SEAT RECLINER KNOB.........................................................1821-30 SEAT SLIDE AND TILT CONTROL (ALL SEATS) ....................1821-8 SEAT SLIDE CONTROL (ALL SEATS) .....................................1821-8 SEAT SLIDE PUCK KIT ............................................................1821-8 SEAT SLIDE SPRING KIT ........................................................1821-8 SEAT SLIDER PLATE ASSEMBLY .........................................1821-10 SEAT SUSPENSION (AIR SUSPENSION) (COMPLETE ASSEMBLY NUMBER ONLY) ......................1821-22 SEAT SUSPENSION (STANDARD) ..........................................1821-2 SEAT SUSPENSION (STANDARD) ..........................................1821-6 SEAT SUSPENSION ACTUATOR KIT (DELUXE) ..................1821-20 SEAT SUSPENSION BOOT KIT (DELUXE) ...........................1821-18 SEAT SUSPENSION BOOT, STANDARD.................................1821-6 SEAT SUSPENSION CAM KIT (DELUXE) .............................1821-20 SEAT SUSPENSION COMPONENT PARTS (AIR SUSPENSION)...................................................................1821-24 SEAT SUSPENSION COMPONENTS AND SHOCK ABSORBER KIT (AIR SUSPENSION)...............................1821-26 SEAT SUSPENSION ROLLER KIT (DELUXE).......................1821-18 SEAT SUSPENSION SHAFT KIT (DELUXE) .........................1821-18 SEAT SUSPENSION SHOCK KIT (DELUXE) ........................1821-18 SEAT SUSPENSION SPRING KIT (DELUXE) .......................1821-20 SEAT SUSPENSION SPRING, STANDARD ............................1821-6 SEAT SUSPENSION TETHER KIT (DELUXE).......................1821-18 SEAT SUSPENSION, MECHANICAL (DELUXE) ...................1821-12 SEAT SUSPENSION, MECHANICAL (DELUXE) ...................1821-16 SEAT TILT CONTROL (ALL SEATS) ........................................1821-8 SEAT TILTING BRACKET.........................................................1811-2 SEAT TILTING BRACKET.........................................................1811-4

SEAT WIRING HARNESS FROM SEAT COMPRESSOR HARNESS TO FUSE BOX, AIR SUSPENSION................ 1821-24 SEAT WIRING HARNESS FROM SEAT COMPRESSOR HARNESS TO FUSE BOX, AIR SUSPENSION................ 1821-26 SEAT, CLOTH (AIR SUSPENSION)....................................... 1821-22 SEAT, VINYL (AIR SUSPENSION) ........................................ 1821-22 SEDIMENT BOWL, PRIMARY FUEL FILTER.......................... 0420-2 SEGMENT, DRIVE CHAIN SPROCKET .................................. 0132-6 SENDER WIRING HARNESS, FUEL TANK ............................ 0564-2 SENDER, FUEL TANK............................................................. 0564-2 SENSOR (SPEED), HYDROSTATIC TRACK DRIVE MOTOR ................................................................. 0355-18 SENSOR KIT, ROTARY, TRANSMISSION CONTROL LEVER................................................................................. 0315-2 SENSOR ON SHAFT, HYDROSTATIC TRACK DRIVE MOTOR MAGNETIC RING, SPEED ................................. 0355-18 SENSOR, AIR CLEANER VACUUM SWITH ........................... 0521-2 SENSOR, CRANKSHAFT POSTION ...................................... 0402-4 SENSOR, CRANKSHAFT TIMING .......................................... 0578-1 SENSOR, DECELERATOR ENGAGEMENT ........................... 1115-2 SENSOR, ENGINE OIL PRESSURE .................................................................. 1678-2 SENSOR, ENGINE COOLANT TEMPERATURE .................... 0578-1 SENSOR, HYDRAULIC OIL TEMPERATURE......................... 1678-2 SENSOR, HYDROSTATIC SPEED .......................................... 0355-2 SENSOR, HYDROSTATIC SPEED .......................................... 0355-6 SENSOR, MANIFOLD AIR TEMPERATURE........................... 0578-1 SENSOR, PRIMARY FUEL FILTER MOISTURE..................... 0578-2 SERVICE DOOR, ENGINE SIDE SHIELD............................... 1912-2 SERVICE DOOR, HOOD ......................................................... 1911-2 SERVO PISTON KIT, HYDROSTATIC.................................... 0355-10 SHAFT COVER, PTO............................................................... 2161-4 SHAFT KIT (AIR SUSPENSION SEAT) ................................. 1821-24 SHAFT KIT, HYDROSTATIC MOTOR, SYNCH...................... 0355-18 SHAFT WITH ARM, HYDRAULIC CONTROL ......................... 3215-2 SHAFT, CARRIER ROLLER .................................................... 0133-4 SHAFT, ENGINE ROCKER ARM............................................. 0402-2 SHAFT, FRONT HYDROSTATIC PUMP .................................. 0355-2 SHAFT, HYDROSTATIC PUMP.............................................. 0355-10 SHAFT, HYDROSTATIC TRACK DRIVE MOTOR.................. 0355-18 SHAFT, IDLER ......................................................................... 0133-8 SHAFT, IDLER GEAR .............................................................. 0404-4 SHAFT, REAR HYDROSTATIC PUMP..................................... 0355-2 SHAFTS, PIVOT....................................................................... 1743-4 SHIELD DEFLECTOR GRID, SAND........................................ 0511-4 SHIELD, RADIATOR FAN......................................................... 0511-2 SHIELD,SAND ......................................................................... 0511-4 SHIELDS, RIGHT AND LEFT SIDE, ENGINE ......................... 1912-2 SHIM AND TORQUE DECAL, BLADE(ENGLISH, FRENCH, SPANISH) ........................................................... 3201-2 SHIMS, BLADE C-FRAME SOCKET AND .............................. 3201-2 SHOCK ABSORBER KIT(AIR SUSPENSION) AND COMPONENTS, SEAT...................................................... 1821-26 SHOCK ABSORBER, MECHANICAL SEAT SUSPENSION ..................................................................... 1821-6 SHOCK KIT (DELUXE SEAT) ................................................ 1821-18 SHOE 24 INCH SWAMP.......................................................... 0132-2 SHOE 24 INCH SWAMP (CONTINUED) ................................. 0132-4 SHOE 24 INCH, GROUSER .................................................... 0132-2 SHOE 24 INCH, GROUSER (CONTINUED) ........................... 0132-4 SHORT BLOCK ASSEMBLY, ENGINE .................................... 0404-6 SHROUD, RADIATOR FAN ...................................................... 0511-2 SHUT OFF VALVE, FUEL ........................................................ 0563-2 SIDE COVER INSERT, HYDROSTATIC PUMP ..................... 0355-10 SIDE SHIELDS, RIGHT AND LEFT ENGINE .......................... 1912-2 SIDE WINDOW WIPERS ......................................................... 1814-6 SIGHT GAUGE, HYDRAULIC RESERVOIR ............................ 2164-2

000I-20

700J CRAWLER DOZER (S.N. -139435)

PC9473

(13-APR-07) PN=20


000I-21 700J CRAWLER DOZER (S.N. -139435)

ALPHABETICAL INDEX - CONTINUED PAGE

PAGE

SIGHT LABEL, HYDRAULIC ....................................................2164-2 SINGLE LEVER CONTROL BOOT ..........................................0315-2 SINGLE LEVER CONTROL BRACKET....................................0315-2 SINGLE LEVER CONTROL GRIP CONTROLLER HANDLE...............................................................................0315-2 SINGLE LEVER CONTROL MOUNTING PLATE .....................0315-2 SINGLE LEVER CONTROL WITH SPEED IN GRIP................0315-2 SINGLE LEVER CONTROL WITH SPEED IN GRIP REVERSE RATIO SWITCH .................................................0315-2 SINGLE LEVER CONTROL WITH SPEED IN GRIP WIRING HARNESS WITH SWITCH AND COVER ..............0315-2 SIX WAY BLADE HYDRAULIC LABEL (S/N -XXXXXX) ....................................................................1810-4 SIX WAY BLADE HYDRAULIC LABEL (S/N XXXXXX- ) ................................................................ 1810-5A SLEEVE, CORDURA, BLADE CYLINDER PLUMBING ...........3263-8 SLEEVE, CORDURA, TILT CYLINDER PLUMBING ................3263-4 SLIDE LATCH (ALL SEATS) .....................................................1821-8 SLIDE LATCH KIT (ALL SEATS).............................................1821-10 SLIDE PUCK KIT (ALL SEATS) ................................................1821-8 SLIDE SPRING KIT (ALL SEATS) ............................................1821-8 SLIDER PLATE ASSEMBLY (ALL SEATS) .............................1821-10 SLIPPER GUIDE, HYDROSTATIC PUMP ..............................0355-12 SOCKET AND SHIMS, BLADE C-FRAME ...............................3201-2 SOLENOID KIT, STARTING MOTOR........................................0422-2 SOLENOID, STARTING AID COLD WEATHER/ETHER...............................................................0505-2 SOLENOID, TRANSMISSION/HYDROSTATIC SPEED SELECTOR ........................................................................0355-22 SPACER, FAN ...........................................................................0512-2 SPACER, ROPS SEAT BASE ...................................................1811-2 SPANISH AND FRENCH LABELS AND DECALS....................1322-4 SPANISH OR FRENCH LABEL AND DECAL KIT ....................1322-4 SPEAKERS, RADIO .................................................................2001-2 SPEED LABEL, GROUND........................................................0315-2 SPEED LEVER ASSEMBLY .....................................................0315-2 SPEED RING, HYDROSTATIC PUMP....................................0355-12 SPEED SELECTOR SOLENOID, TRANSMISSION/ HYDROSTATIC...................................................................0355-22 SPEED SENSOR ON SHAFT, HYDROSTATIC TRACK DRIVE MOTOR MAGNETIC RING ....................................0355-18 SPEED SENSOR, HYDROSTATIC TRACK DRIVE MOTOR ..................................................................0355-18 SPEED SENSOR, WHEEL.......................................................0401-1 SPEED SWITCH POTENTIOMETER, ENGINE .......................1676-2 SPLINE ADAPTER, STANDARD HYDRAULIC PUMP .............2161-2 SPOOL SEAL KIT, HYDRAULIC CONTROL VALVE ................3262-2 SPRING KIT, SEAT SLIDE........................................................1821-8 SPRING KIT, SEAT SUSPENSION (DELUXE).......................1821-20 SPRING, ENGINE VALVE.........................................................0409-2 SPRING, HYDROSTATIC COMPRESSION ...........................0355-10 SPRING, ROCKER ARM SHAFT .............................................0402-2 SPRING, SLIDE LATCH KIT (ALL SEATS).............................1821-10 SPRING, STANDARD SEAT SUSPENSION ............................1821-6 SPRING, SWASHPLATE, HYDROSTATIC PUMP ..................0355-12 SPRING, TRACK ADJUSTER (COMPRESSION)....................0133-6 SPROCKET GUARD ................................................................0132-8 SPROCKET GUARD SUPPORT ..............................................0131-2 SPROCKET, DRIVE CHAIN......................................................0132-6 STACK, CHROME EXHAUST MUFFLER .................................1911-2 STACK, EXHAUST MUFFLER..................................................1911-2 STANDARD C-FRAME .............................................................3243-2 STANDARD DRAWBAR............................................................1511-2 STANDARD HYDRAULIC PUMP..............................................2161-2 STANDARD HYDRAULIC PUMP SPLINE ADAPTER ..............2161-2 STANDARD SEAT.....................................................................1821-2 STANDARD SEAT ARMREST ..................................................1821-4

STANDARD SEAT SUSPENSION ........................................... 1821-2 STANDARD SEAT SUSPENSION COMPONENTS................. 1821-6 START AID SWITCH................................................................ 0505-6 START AID SWITCH COVER .................................................. 0505-6 START AND CAUTION LABEL (S/N -XXXXXX).................................................................... 1810-4 START AND CAUTION LABEL (S/N XXXXXX- )................................................................. 1810-5A START RELAY, ENGINE WIRING HARNESS ......................... 1674-8 START SWITCH NEUTRAL ..................................................... 0315-2 STARTING AID FLUID CYLINDER COLD WEATHER/ETHER................................................... 0505-2 STARTING AID NOZZLE COLD WEATHER/ ETHER ................................................................................ 0505-2 STARTING AID SOLENOID COLD WEATHER/ETHER.............................................................. 0505-2 STARTING AID WITH TURBO CHARGER COLD WEATHER/ETHER................................................... 0505-2 STARTING AID, ETHER/COLD WEATHER ............................. 0505-2 STARTING MOTOR ................................................................. 0422-2 STATOR, A/C COMPRESSOR................................................. 1832-8 STEPS, CAB ............................................................................ 1822-2 STRAINER, ENGINE OIL PUMP INTAKE ............................... 0407-4 STRAP, ALTERNATOR ADJUSTING ....................................... 0423-2 STRAP, BATTERY GROUND ................................................... 1671-2 STRAP, ENGINE LIFT.............................................................. 0409-4 STRAP, STARTER GROUND................................................... 1674-4 STRIKER AND GUARD, CAB DOOR LATCH .......................... 1813-2 STRIP, TRACK FRAME WEAR................................................ 0131-2 SUCTION HOSE, DRIVE THRU PUMP................................... 2163-8 SUCTION HOSE, HYDRAULIC PUMP.................................... 2163-2 SUCTION HOSE, HYDRAULIC RESERVOIR TO PUMP .................................................................................. 2163-2 SUCTION HOSE, HYDROSTATIC ........................................... 0363-8 SUPPORT BRACKET, DIPSTICK TUBE ................................. 0407-2 SUPPORT, ALTERNATOR ....................................................... 0423-2 SUPPORT, BOLT ON CROSSBAR.......................................... 0131-2 SUPPORT, BOLT ON CROSSBAR (LOW GROUND PRESSURE)........................................................................ 0131-2 SUPPORT, BRAKE .................................................................. 1115-2 SUPPORT, CARRIER ROLLER............................................... 0133-4 SUPPORT, HOOD.................................................................... 1911-4 SUPPORT, SPROCKET GUARD............................................. 0131-2 SUSPENSION BOOT CLIP KIT (DELUXE SEAT) ................. 1821-18 SUSPENSION BOOT, STANDARD SEAT................................ 1821-6 SUSPENSION COMPONENT PARTS, SEAT (AIR SUSPENSION).................................................................. 1821-24 SUSPENSION COMPONENTS, SEAT (AIR SUSPENSION).................................................................. 1821-26 SUSPENSION SPRING, STANDARD SEAT............................ 1821-6 SUSPENSION, MECHANICAL SEAT (DELUXE) .................. 1821-16 SUSPENSION, SEAT (AIR SUSPENSION) (COMPLETE ASSEMBLY NUMBER ONLY)...................... 1821-22 SUSPENSION, SEAT, COMPRESSOR WIRING HARNESS (AIR SUSPENSION) ....................................... 1821-24 SUSPENSION, STANDARD SEAT .......................................... 1821-2 SUSPENSION, STANDARD SEAT .......................................... 1821-6 SWAMP SHOE 24 INCH.......................................................... 0132-2 SWAMP SHOE 24 INCH (CONTINUED) ................................. 0132-4 SWASHPLATE ASSEMBLY, HYDROSTATIC PUMP.............. 0355-12 SWASHPLATE FEEDBACK LINK .......................................... 0355-12 SWASHPLATE GUIDE, HYDROSTATIC PUMP..................... 0355-12 SWASHPLATE SPRING, HYDROSTATIC PUMP .................. 0355-12 SWASHPLATE, HYDROSTATIC VARIABLE .......................... 0355-12 SWITCH CABLE, MASTER DISCONNECT ............................ 1671-2 SWITCH CONTROL PANEL, OVERHEAD, CAB (S/N -XXXXXX).................................................................... 1810-6

700J CRAWLER DOZER (S.N. -139435)

PC9473

(13-APR-07)

000I-21 PN=21


000I-22 700J CRAWLER DOZER (S.N. -139435)

ALPHABETICAL INDEX - CONTINUED PAGE

PAGE

SWITCH COVER, START AID ..................................................0505-6 SWITCH FACEPLATE...............................................................1810-2 SWITCH FOR SINGLE LEVER CONTROL WITH SPEED IN GRIP, REVERSE RATIO.....................................0315-2 SWITCH FOR TRANSMISSION CONTROL LEVER, REVERSE RATIO.................................................................0315-2 SWITCH LABEL, MASTER DISCONNECT ..............................1671-2 SWITCH POTENTIOMETER, ENGINE SPEED .......................1676-2 SWITCH, AIR CONDITIONING LOW PRESSURE ..................1832-2 SWITCH, CAB HI-INTENSITY LIGHTS ....................................1673-6 SWITCH, FRONT AND SIDE WINDOW WIPER & WASHER..............................................................................1814-6 SWITCH, KEY...........................................................................1676-2 SWITCH, MASTER DISCONNECT ..........................................1671-2 SWITCH, NEUTRAL START.....................................................0315-2 SWITCH, PARK BRAKE LOCK ................................................1115-4 SWITCH, REVERSE RATIO .....................................................1676-2 SWITCH, ROPS AND CAB UNDER SEAT HEATER ...............................................................................1831-2 SWITCH, ROPS HI-INTENSITY LIGHTS .................................1673-4 SWITCH, START AID................................................................0505-6 SWITCH, WORK LIGHT ON-OFF ............................................1676-2 SYNCH SHAFT KIT, HYDROSTATIC MOTOR........................0355-18

TOP COVERS, TRACK FRAME ............................................ 0133-10 TORQUE AND SHIM DECAL, BLADE(ENGLISH, FRENCH, SPANISH) ........................................................... 3201-2 TORSIONAL DAMPER ............................................................ 0429-1 TOW HOOK ............................................................................. 1512-2 TRACK ADJUSTER ................................................................. 0133-6 TRACK ADJUSTER ADAPTER ............................................... 0133-6 TRACK ADJUSTER HOUSING ............................................... 0133-6 TRACK ADJUSTER SPRING (COMPRESSION) .................... 0133-6 TRACK CHAIN DRIVE SPROCKET ........................................ 0132-6 TRACK CHAIN DRIVE SPROCKET GUARD .......................... 0132-8 TRACK CHAIN TENSION ADJUSTER .................................... 0133-6 TRACK CHAIN TENSION ADJUSTER IDLER YOKE.............. 0133-8 TRACK CHAIN TENSION ADJUSTER PISTON...................... 0133-8 TRACK CHAIN TENSION ADJUSTER SEALS ....................... 0133-8 TRACK DRIVE MOTOR MAGNETIC RING SPEED SENSOR ON SHAFT, HYDROSTATIC.............................. 0355-18 TRACK DRIVE MOTOR, HYDROSTATIC .............................. 0355-18 TRACK FRAME........................................................................ 0131-2 TRACK FRAME (LOW GROUND PRESSURE) ...................... 0131-2 TRACK FRAME COVERS...................................................... 0133-10 TRACK LINK, LUBED .............................................................. 0132-2 TRACK LINK, LUBED (CONTINUED) ..................................... 0132-4 TRACK ROCK DEFLECTOR MOUNTING PLATE................... 0131-2 TRACK ROCK GUARDS.......................................................... 0131-4 TRACK ROLLERS (SINGLE AND DOUBLE FLANGED)AND COMPONENT PARTS .............................. 0133-2 TRACK SAG LABEL ................................................................ 1322-2 TRACK, LUBED CHAIN, 40 LINK WITH 16 INCH SHOES ...................................................................... 0132-2 TRACK, LUBED CHAIN, 40 LINK WITH 16 INCH SHOES (CONTINUED) ............................................. 0132-4 TRACK, LUBED CHAIN, 40 LINK WITHOUT SHOES ................................................................................ 0132-2 TRACK, LUBED CHAIN, 40 LINK WITHOUT SHOES(CONTINUED) ........................................................ 0132-4 TRANSMISSION CONTROL LEVER (FNR)............................ 0315-2 TRANSMISSION CONTROL LEVER BOOT ........................... 0315-2 TRANSMISSION CONTROL LEVER BRACKET..................... 0315-2 TRANSMISSION CONTROL LEVER HANDLE ....................... 0315-2 TRANSMISSION CONTROL LEVER MOUNTING PLATE.................................................................................. 0315-2 TRANSMISSION CONTROL LEVER REVERSE RATIO SWITCH .............................................................................. 0315-2 TRANSMISSION CONTROL LEVER WIRING HARNESS WITH SWITCH AND COVER............................ 0315-2 TRANSMISSION CONTROL LEVER WITH SPEED IN GRIP.................................................................................... 0315-2 TRANSMISSION CONTROLLER, MICROPROCESSOR ....... 0375-2 TRANSMISSION COOLER BYPASS PLUMBING ................. 0363-10 TRANSMISSION FILTER......................................................... 0364-2 TRANSMISSION FILTER ELEMENT....................................... 0364-2 TRANSMISSION FILTER HEAD.............................................. 0364-2 TRANSMISSION FLUID SIGHT LABEL .................................. 1322-2 TRANSMISSION HIGH PRESSURE HOSES ......................... 0363-4 TRANSMISSION ISOLATOR ................................................... 0325-2 TRANSMISSION OIL PRESSURE SENSOR .......................... 1062-2 TRANSMISSION WIRING HARNESS ..................................... 1674-2 TRANSMISSION/HYDROSTATIC DIAGNOSTIC PLUMBING.......................................................................... 0363-6 TRANSMISSION/HYDROSTATIC SPEED SELECTOR SOLENOID ........................................................................ 0355-22 TRANSMISSION/HYDROSTATIC TESTING LABEL ............... 0363-6 TRANSVERSE CASE BOTTOM COVERS .............................. 1741-2 TRAY, LUNCH BOX AND CUP............................................... 1810-12 TRAY, ROPS AND CAB UNDER SEAT HEATER .................... 1831-2 TREAD PLATES, CAB STEP ................................................... 1822-2

T T-BAR CONTROL HANDLE......................................................3215-2 TANK 10W30 OIL DESIGNATION LABEL, HYDRAULIC AND HYDROSTATIC OIL................................1322-2 TANK, FUEL..............................................................................0564-2 TANK, RADIATOR RECOVERY ................................................0511-2 TANK, WINDSHIELD WIPER WASHER FLUID .......................1814-4 TEMPERATURE SENSOR, HYDRAULIC OIL..........................1678-2 TENSION ADJUSTER IDLER YOKE, TRACK CHAIN .............0133-8 TENSION ADJUSTER PISTON, TRACK CHAIN......................0133-8 TENSION ADJUSTER SEALS, TRACK CHAIN .......................0133-8 TENSIONER, BELT IDLER.......................................................0429-2 TENSIONER, TRACK CHAIN...................................................0133-6 TERMINATION RESISTOR, CAN.............................................1674-4 TERMINATION RESISTOR, CAN.............................................1674-8 TETHER BELT KIT (AIR SUSPENSION SEAT)......................1821-24 TETHER KIT (DELUXE SEAT) ...............................................1821-18 THERMAL BYPASS VALVE, OIL COOLER ............................0363-10 THERMOSTAT AND COVER ....................................................0418-2 THERMOSTAT, CAB HEATER (UPPER) ..................................1831-8 THREE INCH SEAT BELT (AIR SUSPENSION).....................1821-22 THREE INCH SEAT BELT (DELUXE).....................................1821-12 THRUST BEARING, ENGINE...................................................0401-1 TIE DOWN LABEL ....................................................................1322-2 TIE RODS, CONTROL VALVE..................................................3262-2 TILT CONTROL (ALL SEATS) ..................................................1821-8 TILT CYLINDER BORE SEAL KIT............................................3265-6 TILT CYLINDER HEAD END PIN .............................................3201-2 TILT CYLINDER PLUMBING ....................................................3263-4 TILT CYLINDER ROD END PIN ...............................................3243-2 TILT CYLINDER ROD SEAL KIT ..............................................3265-6 TILT HOSE, ROD AND HEAD END..........................................3263-8 TILT HYDRAULIC CYLINDER ..................................................3265-6 TILT PLUMBING HYDRAULIC HOSES ....................................3263-4 TILTING BRACKET, SEAT ........................................................1811-2 TILTING BRACKET, SEAT ........................................................1811-4 TIMING GEAR COVER.............................................................0402-4 TOGGLE SWITCH, CAB HI-INTENSITY LIGHTS ....................1673-6 TOGGLE SWITCH, ROPS HI-INTENSITY LIGHTS .................1673-4 TOOL BOX ..............................................................................1810-12 TOP COVER, HEATER (UPPER) .............................................1831-8

000I-22

700J CRAWLER DOZER (S.N. -139435)

PC9473

(13-APR-07) PN=22


000I-23 700J CRAWLER DOZER (S.N. -139435)

ALPHABETICAL INDEX - CONTINUED PAGE

PAGE

TUBE SUPPORT BRACKET, DIPSTICK ..................................0407-2 TUBE, ENGINE OIL PUMP INTAKE .........................................0407-4 TUBE, THERMOSTAT COVER .................................................0418-2 TUBE,ENGINE OIL FILLER......................................................0407-2 TURBOCHARGER AND OIL LINES.........................................0416-2 TWO INCH SEAT BELT ............................................................1821-2

VALVE, INLET .......................................................................... 3262-2 VALVE, OIL COOLER THERMAL BYPASS ........................... 0363-10 VALVE, OUTLET ...................................................................... 3262-2 VALVE, RADIATOR DRAIN ...................................................... 0511-2 VALVE, REAR WIPER FLOW CONTROL................................ 1814-8 VANDAL COVER (ROPS) ........................................................ 1810-2 VENTILATING SYSTEM, ENGINE .......................................... 0408-2 VINYL HEADREST (AIR SUSPENSION) .............................. 1821-22 VINYL SEAT (AIR SUSPENSION)......................................... 1821-22 VINYL SEAT (DELUXE) ......................................................... 1821-12 VINYL SEAT BACK (AIR SUSPENSION) .............................. 1821-22 VINYL SEAT PAD (AIR SUSPENSION) ................................. 1821-22

U U-JOINT (HOUSING), HYDRAULIC CONTROL.......................3215-2 UNIVERSAL FINAL DRIVE SHAFT..........................................0201-2 UNIVERSAL FINAL DRIVE SHAFT..........................................0201-4 UPPER HEATER DRAIN PAN FOAM .......................................1831-8 UPPER HEATER, CAB .............................................................1831-8

V VALVE BELLCRANK, AUXILIARY ............................................3215-2 VALVE COVER, ENGINE..........................................................0402-3 VALVE SEGMENT, HYDROSTATIC MOTOR RETAINER SPINDLE .........................................................0355-18 VALVE TIE RODS .....................................................................3262-2 VALVE, AIR CLEANER CLEAN OUT........................................0521-2 VALVE, AIR CONTROL (AIR SUSPENSION SEAT)...............1821-26 VALVE, AUXILIARY...................................................................3262-2 VALVE, AUXILIARY CIRCUIT RELIEF (FIFTH FUNCTION) .............................................................3262-6 VALVE, AUXILIARY CIRCUIT RELIEF (FOURTH FUNCTION) ........................................................3262-4 VALVE, AUXILIARY WITH FLOAT (FIFTH FUNCTION) .............................................................3262-6 VALVE, AUXILIARY WITH FLOAT (FOURTH FUNCTION) ........................................................3262-4 VALVE, AUXILIARY WITH LINKAGE (FIFTH FUNCTION) .............................................................3262-6 VALVE, AUXILIARY WITH LINKAGE (FOURTH FUNCTION) ........................................................3262-4 VALVE, BRAKE .........................................................................1062-2 VALVE, CAB HEATER PLUMBING...........................................1831-6 VALVE, CAB HEATER PLUMBING, DRAIN..............................1831-6 VALVE, CAB HEATER THERMAL EXPANSION (UPPER)...............................................................................1831-8 VALVE, CAB HEATER WATER (UPPER) .................................1831-8 VALVE, ELECTRONIC DISPLACEMENT CONTROL HYDROSTATIC MOTOR ....................................................0355-22 VALVE, ENGINE COOLANT DRAIN.........................................0404-2 VALVE, ENGINE INTAKE AND EXHAUST ...............................0409-2 VALVE, ENGINE OIL PRESSURE REGULATING....................0404-2 VALVE, FUEL SHUT OFF .........................................................0563-2 VALVE, FUEL TANK DRAIN......................................................0564-2 VALVE, HYDRAULIC CONTROL (DOES NOT INCLUDE HOSE ADAPTERS) .............................................3262-2 VALVE, HYDRAULIC, HYDROSTATIC AND ENGINE DRAIN ................................................................................2163-10 VALVE, HYDROSTATIC CHARGE RELIEF ..............................0355-2 VALVE, HYDROSTATIC ELECTRONIC DISPLACEMENT CONTROL ...............................................0355-2 VALVE, HYDROSTATIC MOTOR ............................................0355-22 VALVE, HYDROSTATIC MULTI FUNCTION, PUMP .................0355-2 VALVE, HYDROSTATIC MULTI FUNCTION, PUMP .................0355-6 VALVE, HYDROSTATIC OIL COOLER BYPASS ....................0363-10 VALVE, HYDROSTATIC PUMP DISPLACEMENT CONTROL..........................................................................0355-14 VALVE, HYDROSTATIC PUMP PRESSURE CONTROL PILOT .................................................................................0355-14

700J CRAWLER DOZER (S.N. -139435)

PC9473

(13-APR-07)

W WARNING LABEL SEAT BELT (S/N -XXXXXX).................................................................... 1810-4 WARNING LABEL SEAT BELT (S/N XXXXXX- )................................................................. 1810-5A WASHER & WIPER SWITCH, FRONT AND SIDE WINDOWS .......................................................................... 1814-6 WASHER FLUID TANK, WINDSHIELD WIPER....................... 1814-4 WATER PUMP ......................................................................... 0402-4 WATER PUMP INLET .............................................................. 0417-1 WATER PUMP PULLEY........................................................... 0417-1 WATER VALVE RESISTOR (UPPER).............................................................................. 1831-8 WATER VALVE, CAB HEATER PLUMBING............................. 1831-6 WEAR STRIP, TRACK FRAME................................................ 0131-2 WEIGHT ADJUSTMENT KNOB (DELUXE)........................... 1821-16 WEIGHT/HEIGHT ADJUSTMENT KNOB, SEAT SUSPENSION ..................................................................... 1821-6 WEIGHTS, FRONT .................................................................. 1749-2 WHEEL, CRANKSHAFT TIMING ............................................ 0578-1 WHEEL, SPEED SENSOR ...................................................... 0401-1 WINCH DRAWBAR, 4000S ..................................................... 1511-6 WINDOW GLASS, FRONT ...................................................... 1814-2 WINDOW GLASS, REAR......................................................... 1814-2 WINDOW PLUG....................................................................... 1814-2 WINDOW PLUG, REAR........................................................... 1814-2 WINDOW WIPER & WASHER SWITCH, FRONT AND SIDE............................................................................ 1814-6 WINDOW WIPER ARMS, FRONT AND SIDE ......................... 1814-6 WINDOW WIPER BLADES, FRONT AND SIDE ..................... 1814-6 WINDOW WIPER MOTOR....................................................... 1814-6 WINDOW WIPERS, FRONT AND SIDE .................................. 1814-6 WINDOW, LEFT SIDE.............................................................. 1814-2 WINDOW, REAR WIPER ......................................................... 1814-8 WINDOW, RIGHT SIDE ........................................................... 1814-2 WINDOWS, CAB...................................................................... 1814-2 WINDSHIELD WASHER HOSE, FRONT AND SIDE............... 1814-6 WINDSHIELD WIPER WASHER RESERVOIR ....................... 1814-4 WINDSHIELD WIPER WASHER TANK ................................... 1814-4 WINDSHIELD WIPER WASHER TANK PUMP........................ 1814-4 WIPER & WASHER SWITCH, FRONT AND SIDE WINDOW........................................................... 1814-6 WIPER ARM, FRONT AND SIDE WINDOW ........................... 1814-6 WIPER BLADE, FRONT AND SIDE WINDOWS ..................... 1814-6 WIPER BLADE, REAR............................................................. 1814-8 WIPER MOTOR, FRONT AND SIDE WINDOWS .................... 1814-6 WIPER WASHER FLUID TANK, WINDSHIELD....................... 1814-4 WIPER WASHER TANK CAP .................................................. 1814-4 WIPER, REAR WINDOW......................................................... 1814-8 WIPERS, FRONT AND SIDE WINDOW .................................. 1814-6 WIRING HARNESS FROM SEAT COMPRESSOR HARNESS TO FUSE BOX, AIR SUSPENSION................ 1821-24

000I-23 PN=23


000I-24 700J CRAWLER DOZER (S.N. -139435)

ALPHABETICAL INDEX - CONTINUED PAGE

PAGE

WIRING HARNESS FROM SEAT COMPRESSOR HARNESS TO FUSE BOX, AIR SUSPENSION.................1821-26 WIRING HARNESS WITH SWITCH AND COVER, SINGLE LEVER CONTROL.................................................0315-2 WIRING HARNESS WITH SWITCH AND COVER, TRANSMISSION CONTROL LEVER...................................0315-2 WIRING HARNESS, CAB .........................................................1674-4 WIRING HARNESS, CAB HEATER (UPPER)...............................................................................1831-8 WIRING HARNESS, CAB WORK LIGHT .................................1673-6 WIRING HARNESS, COMPRESSOR, SEAT (AIR SUSPENSION)...................................................................1821-24 WIRING HARNESS, FUEL SENDER .......................................0564-2 WIRING HARNESS, RADIO .....................................................2001-2 WIRING HARNESS, REAR WIPER MOTOR ...........................1814-8 WIRING HARNESS, ROPS ......................................................1674-6 WIRING HARNESS, TRANSMISSION .....................................1674-2 WIRING HARNESS, UNDER SEAT ROPS AND CAB HEATER ...............................................................................1831-2 WORK LIGHT HARNESS, ROPS .............................................1673-4 WORK LIGHT HOUSING, CAB HI-INTENSITY........................1673-6 WORK LIGHT HOUSING, ROPS .............................................1673-4 WORK LIGHT ON-OFF SWITCH .............................................1676-2 WORK LIGHT WIRING HARNESS, CAB .................................1673-6 WORK LIGHTS .........................................................................1673-2

X X-LONG TRACK AND LOW GROUND PRESSURE ROCK GUARDS...................................................................0131-6 X-LONG TRACK REAR ROCK GUARDS.................................0131-8 XLT LABEL................................................................................1322-2 XLT TRACK FRAME .................................................................0131-2

Y YOKE, TRACK CHAIN TENSION ADJUSTER .........................0133-8

000I-24

700J CRAWLER DOZER (S.N. -139435)

PC9473

(13-APR-07) PN=24


0131-1 TRACKS

1

TRACK FRAMES AND UNDERCARRIAGE 0131 MEMORANDA

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05)

0131-1 PN=25


0131-2 TRACKS

1

TRACK FRAMES AND UNDERCARRIAGE 0131 TRACK FRAME TX1014193

0131-2

-UN-26OCT06

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(13-APR-07) PN=26


0131-3 TRACKS

1

TRACK FRAMES AND UNDERCARRIAGE 0131 TRACK FRAME

KEY

1 2 3

4

5

6 7 8 9 11 12 13 14 15 17 18 19 20 21 22

PART NO.

PART NAME

QTY.

T176572 T176091 AT220634 AT225823

BUSHING WEAR PLATE FRAME FRAME

1 4 1 1

AT227030

FRAME

1

AT220633 AT225822

FRAME FRAME

1 1

AT227029

FRAME

1

AT220642 AT220643

SUPPORT SUPPORT

2 2

AT224119 19M7892 T181070 19M8035 24M7241 RE57836 19M8011 T176571 T178021 T175773 R73290 T181071 19M7889 T182582 AT221743 T176753

SUPPORT CAP SCREW SPACER CAP SCREW WASHER PIPE PLUG CAP SCREW BUSHING PLATE GUIDE WASHER SPACER CAP SCREW PLATE BRACKET PLATE

2 6 4 12 12 2 4 2 2 4 12 6 4 2 2 1

700J CRAWLER DOZER (S.N. -139435)

PC9473

(13-APR-07)

SERIAL NO.

REMARKS

(OUTER) (CONVENIENCE ASSEMBLY) (RIGHT TRACK FRAME) (CONVENIENCE ASSEMBLY) (RIGHT TRACK FRAME ) (LGP TRACK) (CONVENIENCE ASSEMBLY) (RIGHT TRACK FRAME ) (XLT TRACK) (CONVENIENCE ASSEMBLY) (LEFT TRACK FRAME) (CONVENIENCE ASSEMBLY) (LEFT TRACK FRAME) (LGP TRACK) (CONVENIENCE ASSEMBLY) (LEFT TRACK FRAME) (XLT TRACK) (BOLT ON CROSSBAR SUPPORT) (LOW GROUND PRESSURE BOLT ON CROSSBAR SUPPORT) (X-LONG TRACK) M20 X 80 (INSIDE) M16 X 35 1/2", (SUB FOR 15H561) M12 X 30 (INNER)

(OUTSIDE) (ROCK DEFLECTOR MOUNTING PLATE) (SPROCKET GUARD SUPPORT)

0131-3 PN=27


0131-4 TRACKS

1

TRACK FRAMES AND UNDERCARRIAGE 0131 ROCKGUARDS T203412

0131-4

-UN-05JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(13-APR-07) PN=28


0131-5 TRACKS

1

TRACK FRAMES AND UNDERCARRIAGE 0131 ROCKGUARDS

KEY

1 2 3 4 5 6 7 9 10 11 12 14 15

PART NO.

19M7759 14M7277 19M7488 AT225927 19M8035 19M8494 24M7241 AT225928 R73290 T176863 T83426 ........ 24M7108

PART NAME

QTY.

CAP SCREW NUT CAP SCREW GUARD CAP SCREW CAP SCREW WASHER GUARD WASHER SPACER WASHER GUARD WASHER

700J CRAWLER DOZER (S.N. -139435)

6 4 4 1 6 4 2 1 12 4 8 2 4

PC9473

(13-APR-07)

SERIAL NO.

REMARKS

M16 X 60 M20 M16 X 40 M16 X 35 M20 X 320 17 X 34 X 4 MM 16.280 X 27 X 2.670 MM, (HARDENED) 20.900 X 35.400 X 7.095 MM, (HARDENED) (FURNISH COMPONENTS) 20 X 30 X 4 MM

0131-5 PN=29


0131-6 TRACKS

1

TRACK FRAMES AND UNDERCARRIAGE 0131 ROCKGUARDS (LGP AND XLT TRACK) T203413

0131-6

-UN-05JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(13-APR-07) PN=30


0131-7 TRACKS

1

TRACK FRAMES AND UNDERCARRIAGE 0131 ROCKGUARDS (LGP AND XLT TRACK)

KEY

1 2 3 4 5 6 7 8 9 10 11 12 13

PART NO.

19M7759 14M7277 19M7488 19M8035 19M8494 24M7241 AT225664 24M7108 AT225665 R73290 T176863 T83426 ........

PART NAME

QTY.

CAP SCREW NUT CAP SCREW CAP SCREW CAP SCREW WASHER GUARD WASHER GUARD WASHER SPACER WASHER GUARD

700J CRAWLER DOZER (S.N. -139435)

4 5 6 6 5 2 1 4 1 15 5 10 2

PC9473

(13-APR-07)

SERIAL NO.

REMARKS

M16 X 60, M16 X 60 M20 M16 X 40 M16 X 35 M20 X 320, (SUB FOR 19M8388) 17 X 34 X 4 MM 20 X 30 X 4 MM 16.280 X 27 X 2.670 MM, (HARDENED) 20.900 X 35.400 X 7.095 MM, (HARDENED) FURNISH COMPONENTS

0131-7 PN=31


0131-8 TRACKS

1

TRACK FRAMES AND UNDERCARRIAGE 0131 REAR ROCKGUARDS T189866

0131-8

-UN-23APR03

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(13-APR-07) PN=32


0131-9 TRACKS

1

TRACK FRAMES AND UNDERCARRIAGE 0131 REAR ROCKGUARDS

KEY

1 2 3 4

PART NO.

AT226733 19M7488 24M7241 ........

PART NAME

QTY.

GUARD CAP SCREW WASHER GUARD

700J CRAWLER DOZER (S.N. -139435)

1 4 4 2

PC9473

(13-APR-07)

SERIAL NO.

REMARKS

(REAR CHAINGUIDE) M16 X 40 (FURNISH COMPONENTS)

0131-9 PN=33


0131-10 TRACKS

1

TRACK FRAMES AND UNDERCARRIAGE 0131 ROCK DEFLECTORS T203417

0131-10

-UN-05JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(13-APR-07) PN=34


0131-11 TRACKS

1

TRACK FRAMES AND UNDERCARRIAGE 0131 ROCK DEFLECTORS

KEY

1 2 3 4 5 6

PART NO.

19M7993 T152076 AT303797 AT303798 T182582 AT303821

PART NAME

QTY.

CAP SCREW WASHER DEFLECTOR DEFLECTOR PLATE KIT

700J CRAWLER DOZER (S.N. -139435)

8 8 1 1 2 1

PC9473

(13-APR-07)

SERIAL NO.

REMARKS

M24 X 50 26 X 55 X 9.500 MM (RIGHT SIDE) (LEFT SIDE) (ROCK DELFECTOR MOUNTING PLATE) (SPECIAL EQUIPMENT FIELD)(ROCK DEFLECTOR KIT) (SUB FOR AT227675)

0131-11 PN=35


0131-12 TRACKS

1

TRACK FRAMES AND UNDERCARRIAGE 0131 FINAL DRIVE GUARD KIT (LGP) T164847

0131-12

-UN-31JAN03

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(13-APR-07) PN=36


0131-13 TRACKS

1

TRACK FRAMES AND UNDERCARRIAGE 0131 FINAL DRIVE GUARD KIT (LGP)

KEY

1 2 3 4 5 6 7

PART NO.

19M7363 19M8035 24M7240 24M7241 AT225681 AT225730 AT227674

PART NAME

QTY.

CAP SCREW CAP SCREW WASHER WASHER COVER COVER KIT

700J CRAWLER DOZER (S.N. -139435)

4 2 4 2 1 1 1

PC9473

(13-APR-07)

SERIAL NO.

REMARKS

M12 X 60 M16 X 35 13 X 25 X 3 MM 17 X 34 X 4 MM (RIGHT HAND SIDE) (LEFT HAND SIDE) (WHOLEGOODS)(FINAL DRIVE GUARD KIT) (LGP ONLY)

0131-13 PN=37


0132-2 TRACKS

1

CHAINS AND SHOES, DRIVE SPROCKETS 0132 LUBED TRACK T203459

0132-2

-UN-01DEC04

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=38


0132-3 TRACKS

1

CHAINS AND SHOES, DRIVE SPROCKETS 0132 LUBED TRACK (CONTINUED)

KEY

1

2

3 4 5 6

7 8 9

10 11 12

PART NO.

PART NAME

QTY.

AT219959

TRACK CHAIN W/O SHOES

1

AT211548 AT305224 AT305234 T176979 T176979 T203865 T203865 T70316 T70316 T149292 T149292 T70317 T70317 AT323627

TRACK CHAIN W/O SHOES TRACK CHAIN W/O SHOES TRACK CHAIN W/O SHOES BUSHING BUSHING TRACK BUSHING TRACK BUSHING STRUTTED LINK-RH STRUTTED LINK-RH TRACK PIN TRACK PIN STRUTTED LINK-LH STRUTTED LINK-LH MASTER TRACK LINK-SPLIT-RH

1 1 1 40 42 40 42 39 41 40 42 39 41 1

AT321522 T152178 T152178 T177859 AT323628

MASTER TRACK LINK-SPLIT-RH MASTER TRACK BOLT MASTER TRACK BOLT BOLT MASTER TRACK LINK-SPLIT-LH

1 2 4 2 1

AT321523 T73607 T73607 T149248 T149248 T149247 T149247

MASTER TRACK LINK-SPLIT-LH WASHER WASHER PLUG PLUG PLUG PLUG

1 80 84 40 42 40 42

SERIAL NO.

REMARKS

(42 LINKS) (WITHOUT SHOES)(LGP, XLT)(IF USED WITH SWAMP SHOES ALSO ORDER (2) T177859) (40 LINKS) (WITHOUT SHOES) (CHAIN 40 LINKS) (EXTENDED WEAR) (CHAIN 42 LINKS) (EXTENDED WEAR) (LGP, XLT) (EXTENDED WEAR) (EXTENDED WEAR) (LGP, XLT) (RIGHT TRACK LINK) (RIGHT TRACK LINK)(LGP, XLT) (LGP, XLT) (LEFT TRACK LINK) (LEFT TRACK LINK) (LGP, XLT) (RIGHT HAND MASTER TRACK LINK WITH EXTENDED WEAR CHAIN)(MASTER TRACK LINKS FOR CHAINS WITH HARDENED BUSHINGS HAVE MACHINED CIRCULAR INDENTATION ON OUTSIDE) (WITH 30 INCH SWAMP SHOE) (MASTER) (MASTER) (WITH 30 INCH SWAMP SHOE) (LEFT HAND MASTER TRACK LINK WITH EXTENDED WEAR CHAIN)(MASTER TRACK LINKS FOR CHAINS WITH HARDENED BUSHINGS HAVE MACHINED CIRCULAR INDENTATION ON OUTSIDE OF MASTER LINK) (THRUST) (THRUST) (LGP, XLT) (PLASTIC) (PLASTIC) (LGP, XLT) (STOPPER) (STOPPER) (LGP, XLT)

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(12-APR-06)

0132-3 PN=39


0132-4 TRACKS

1

CHAINS AND SHOES, DRIVE SPROCKETS 0132 LUBED TRACK (CONTINUED) T203459

0132-4

-UN-01DEC04

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=40


0132-5 TRACKS

1

CHAINS AND SHOES, DRIVE SPROCKETS 0132 LUBED TRACK

KEY

13

PART NO.

PART NAME

QTY.

AT112903 AT112903 T45099

SEAL KIT SEAL KIT SINGLE BAR SHOE

40 42 39

T45099

SINGLE BAR SHOE

41

T106955 T177265 T60828 T60828 T177796 T155559 T155560 T175102 T180051 T155561 T121478 T45097 AT211550

SINGLE BAR SHOE SELF CLEANING SHOE SINGLE BAR SHOE SINGLE BAR SHOE SELF CLEANING SHOE MASTER SINGLE BAR SHOE MASTER SINGLE BAR SHOE SINGLE BAR SHOE MASTER SINGLE BAR SHOE MASTER SINGLE BAR SHOE BOLT NUT TRACK ASSEMBLY WITH SHOES

41 41 39 41 1 1 1 41 1 1 AR AR 1

AT221344 AT211554

TRACK ASSEMBLY WITH SHOES TRACK ASSEMBLY WITH SHOES

1 1

AT219958 AT305225

TRACK ASSEMBLY WITH SHOES TRACK ASSEMBLY WITH SHOES

1 1

AT305235

TRACK ASSEMBLY WITH SHOES

1

AT305226

TRACK ASSEMBLY WITH SHOES

1

AT305227

TRACK ASSEMBLY WITH SHOES

1

AT305233

TRACK ASSEMBLY WITH SHOES

1

18

AT302222

PIN & BUSHING KIT

1

19

AT302223

BUSHING KIT

1

14

15 16 17

700J CRAWLER DOZER (S.N. -139435)

PC9473

(07-SEP-06)

SERIAL NO.

REMARKS

PACKAGE CONTAINS 2 SEALS, (WITH 40 LINKS) PACKAGE CONTAINS 2 SEALS, (WITH 42 LINKS) (20 INCH)(508MM) (SINGLE GROUSER CLOSED CENTER)(WITH 40 LINKS) (20 INCH)(508MM) (SINGLE GROUSER CLOSED CENTER)(WITH 42 LINKS)(LGP, XLT) (24 INCH)(610MM) (LGP) (30 INCH)(762MM) (SWAMP) (22 INCH) (508MM) (22 INCH) (508MM) (LGP, XLT) (30INCH)(762MM) (MASTER) (SWAMP) (20INCH) (508MM) (MASTER) (22INCH) (559MM) (MASTER) (30 INCH)(762 MM) (LGP) (30 INCH)(762 MM) (MASTER) (LGP) (24 INCH (600MM) (MASTER) (TRACK SHOE) (CHAIN, 40 LINK LUBED WITH 20 INCH (508MM) SHOES) (40 LINK LUBED WITH 22 INCH (559MM) SHOES) (CHAIN 42 LINKS, LUBRICATED WITH 24 INCH (610MM) SHOES) (LGP) (CHAIN 42 LINKS WITH 30 INCH (762MM) SHOES) (CHAIN, 40 LINKS WITH 20 INCH(508MM) SHOES) (EXTENDED WEAR) (CHAIN, 40 LINKS WITH 22 INCH(559MM) SHOES) (EXTENDED WEAR) (CHAIN, 42 LINKS WITH 22 INCH(559MM) SHOES) (EXTENDED WEAR) (CHAIN, 42 LINKS WITH 24 INCH(610MM) SHOES) (EXTENDED WEAR) (CHAIN, 42 LINKS WITH 30 INCH(762MM) (EXTENDED WEAR) (PIN, BUSHING, PLUG, AND SEAL KIT) (ONE REQUIRED FOR EACH SIDE OF MACHINE) (BUSHING, PLUG, AND SEAL) (ONE REQUIRED FOR EACH SIDE OF MACHINE)

0132-5 PN=41


0132-6 TRACKS

1

CHAINS AND SHOES, DRIVE SPROCKETS 0132 TRACK CHAIN DRIVE SPROCKET TP67557

0132-6

-UN-10NOV99

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=42


0132-7 TRACKS

1

CHAINS AND SHOES, DRIVE SPROCKETS 0132 TRACK CHAIN DRIVE SPROCKET

KEY

1 2 3 4 5

PART NO.

T207451 19M8035 T177781 24M7396 19M8224

PART NAME

QTY.

SPROCKET SEGMENTS CAP SCREW PLATE WASHER CAP SCREW

5 25 1 16 16

700J CRAWLER DOZER (S.N. -139435)

PC9473

(04-AUG-05)

SERIAL NO.

REMARKS

(SUB FOR T177788) M16 X 35 21 X 34 X 3 MM M20 X 60

0132-7 PN=43


0132-8 TRACKS

1

CHAINS AND SHOES, DRIVE SPROCKETS 0132 TRACK CHAIN DRIVE SPROCKET GUARD T203474

0132-8

-UN-19JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(12-APR-06) PN=44


0132-9 TRACKS

1

CHAINS AND SHOES, DRIVE SPROCKETS 0132 TRACK CHAIN DRIVE SPROCKET GUARD

KEY

1 2 3 4 5

PART NO.

19M8011 24M7240 AT225675 AT225674 24M7226

PART NAME

QTY.

CAP SCREW WASHER COVER COVER WASHER

700J CRAWLER DOZER (S.N. -139435)

6 4 1 1 2

PC9473

(03-FEB-05)

SERIAL NO.

REMARKS

M12 X 30 13 X 25 X 3 MM (LEFT) (RIGHT) 13 X 35 X 5 MM

0132-9 PN=45


0133-2 TRACKS

1

ROLLERS, IDLERS AND IDLER SPRINGS 0133 TRACK ROLLER (SINGLE AND DOUBLE FLANGED) AND COMPONENT PARTS TX1013583

0133-2

-UN-17OCT06

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(05-MAR-07) PN=46


0133-3 TRACKS

1

ROLLERS, IDLERS AND IDLER SPRINGS 0133 TRACK ROLLER (SINGLE AND DOUBLE FLANGED) AND COMPONENT PARTS

KEY

1 2 3 5 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

PART NO.

........ T70622 B3690R AT305695 R73290 R73290 ........ F434249 19M7409 T125572 T149248 R41987 AT323046 AT323045 12H304 19H3483 T47858 ........ 19M7719 19M7719 AT322789 AT322789 AT322790 AT307253

PART NAME

QTY.

LOCKING COLLAR SNAP RING O-RING SEAL WASHER WASHER SHAFT PLUG CAP SCREW CASE PLUG O-RING ROLLER ROLLER LOCK WASHER CAP SCREW PIN BRACKET CAP SCREW CAP SCREW BOTTOM ROLLER BOTTOM ROLLER BOTTOM ROLLER BUSHING KIT

700J CRAWLER DOZER (S.N. -139435)

PC9473

1 2 2 2 48 56 1 1 32 2 1 1 1 1 12 12 1 1 16 24 6 8 6 2

(04-AUG-05)

SERIAL NO.

REMARKS

(SUB AT322789 OR AT322790)

(LGP AND XLT) (SUB AT322789 OR AT322790) (RUBBER PLUG) M16 X 50 (BUSHING) (PLASTIC) (SINGLE) (DOUBLE) 3/8" 3/8" X 1-1/8" (SUB AT322789 OR AT322790) M16 X 70 M16 X 70, (LGP AND XLT) (SUB FOR AT306399) (SINGLE FLANGE)(STANDARD) (SUB FOR AT306399) (LGP AND XLT) (SUB FOR AT306469) (DOUBLE FLANGE) (BUSHING SERVICE KIT)

0133-3 PN=47


0133-4 TRACKS

1

ROLLERS, IDLERS AND IDLER SPRINGS 0133 CARRIER ROLLER WITH COMPONENT PARTS TX1013590

0133-4

-UN-17OCT06

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(05-MAR-07) PN=48


0133-5 TRACKS

1

ROLLERS, IDLERS AND IDLER SPRINGS 0133 CARRIER ROLLER WITH COMPONENT PARTS

KEY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

PART NO.

19M7759 19M7883 19M8224 AT306803 19M7402 AT276140 JD9041 JD9106 AT305855 T125615 T149361 T204966 T204967 T204968 T204969 T204970 R73290 T217102 T217101 T83426 T203473

PART NAME

QTY.

CAP SCREW SCREW CAP SCREW CARRIER ROLLER CAP SCREW CYLINDRICAL ROLLER BEARING BEARING CONE BEARING CUP SEAL PIPE PLUG PLATE SHAFT COVER END PLATE O-RING SNAP RING WASHER SUPPORT SUPPORT WASHER ROLLER SHELL

700J CRAWLER DOZER (S.N. -139435)

PC9473

(05-MAR-07)

2 1 3 1 2 2 1 1 1 1 1 1 1 1 1 1 2 1 1 4 1

SERIAL NO.

REMARKS

M16 X 60 M20 X 120 M20 X 60 M10 X 25

(THRUST PLATE)

16.280 X 27 X 2.670 MM, (HARDENED) (LEFT CARRIER ROLLER SUPPORT) (RIGHT CARRIER ROLLER SUPPORT) 20.900 X 35.400 X 7.095 MM, (HARDENED)

0133-5 PN=49


0133-6 TRACKS

1

ROLLERS, IDLERS AND IDLER SPRINGS 0133 TRACK CHAIN TENSION ADJUSTER TP67561

0133-6

-UN-10NOV99

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=50


0133-7 TRACKS

1

ROLLERS, IDLERS AND IDLER SPRINGS 0133 TRACK CHAIN TENSION ADJUSTER

KEY

1 2 3

PART NO.

T176745 T179322 T176721

PART NAME

QTY.

ADAPTER FITTING SPRING HOUSING

700J CRAWLER DOZER (S.N. -139435)

PC9473

1 1 1

(03-FEB-05)

SERIAL NO.

REMARKS

(SPRING) (TRACK ADJUSTER)

0133-7 PN=51


0133-8 TRACKS

1

ROLLERS, IDLERS AND IDLER SPRINGS 0133 FRONT TRACK CHAIN IDLER AND BRACKETS TX1013584

0133-8

-UN-26JAN07

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(05-MAR-07) PN=52


0133-9 TRACKS

1

ROLLERS, IDLERS AND IDLER SPRINGS 0133 FRONT TRACK CHAIN IDLER AND BRACKETS

KEY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

PART NO.

T176762 T175390 T177307 T139636 T175828 AT222088 T178085 T177309 T177313 T20168 19M8011 T177308 T178580 T177876 T176764 T177878 24M7097 T179073 T175900 T177864 T177865 AT221027 AT221427 T120720 AT159554 AT223492 34M7066 34M7261 T176756 AT220995

PART NAME

QTY.

BRACKET TRACK IDLER PIN FASTENER O-RING BUSHING SEAL SOLID SHIM BAR PLATE WASHER CAP SCREW WEAR PLATE CAP SCREW SOLID SHIM NUT SCREW WASHER CAP SCREW PIN FASTENER PACKING PACKING YOKE WITH TUBE YOKE WITH TUBE PRESSURE RELIEF VALVE CHECK VALVE BRACKET SPRING PIN SPRING PIN BRACKET IDLER

700J CRAWLER DOZER (S.N. -139435)

PC9473

(12-APR-06)

1 1 1 2 2 2 8 4 2 8 8 2 8 4 8 8 8 8 1 1 1 2 2 1 1 2 2 2 2 1

SERIAL NO.

REMARKS

(LEFT HAND BRACKET)

M12 X 30 (SIDE WEAR PLATE) (LEFT) 17 X 28 X 2.500 MM (TRACK CHAIN TENSION ADJUSTER PISTON) (WIPER SEAL) (SEAL, V-PACKING) (LGP, XLT) (CHECK VALVE KIT) 10 X 80 MM 16 X 80 MM (RIGHTHAND) (IDLER WITH BRACKET)

0133-9 PN=53


0133-10 TRACKS

1

ROLLERS, IDLERS AND IDLER SPRINGS 0133 TRACK FRAME COVERS TP67563

0133-10

-UN-10NOV99

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=54


0133-11 TRACKS

1

ROLLERS, IDLERS AND IDLER SPRINGS 0133 TRACK FRAME COVERS

KEY

1 2 3 4 5 6 7 9 10

PART NO.

AT221486 AT221611 19M8011 24M7240 AT221048 AT221597 AT221623 T178297 19M8017 AT221173 AT221478 AT221168 AT221610

PART NAME

QTY.

COVER COVER CAP SCREW WASHER COVER COVER COVER COVER CAP SCREW COVER COVER COVER COVER

700J CRAWLER DOZER (S.N. -139435)

1 1 22 26 2 1 1 2 4 1 1 1 1

PC9473

(03-FEB-05)

SERIAL NO.

REMARKS

(LGP, XLT) M12 X 30 13 X 25 X 3 MM (ACCESS COVER) (LGP, XLT) M12 X 20 (LGP, XLT) (LGP, XLT)

0133-11 PN=55


0201-2 AXLES AND SUSPENSION SYSTEMS

2

DRIVE AXLE HOUSING AND SUPPORT 0201 FINAL DRIVES TP67767

-UN-05OCT00

THIS PARTS LISTING IS CONTINUED

0201-2

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=56


0201-3 AXLES AND SUSPENSION SYSTEMS

2

DRIVE AXLE HOUSING AND SUPPORT 0201 FINAL DRIVES

KEY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34

PART NO.

T174975 AT223910 R115149 R115150 19M7759 24M7241 T174447 T175615 19M7402 T175549 T177548 T177550 T177551 T177148 T77170 U15973 JD8261 JD8959 M3689T T175617 T174327 T174326 JD8213 JD8177 T180548 T180549 T177385 T178007 T178008 T178009 T178264 T178263 19M8295 T176586 AT220933 T177074 T177075 T177076 T175550

PART NAME

QTY.

SPINDLE SEAL BEARING CONE BEARING CUP CAP SCREW WASHER HOUSING SPACER CAP SCREW BEARING HOUSING W/O BEARING SHIM SHIM SHIM O-RING FITTING PLUG O-RING BEARING CUP BEARING CONE DOWEL PIN SPACER PINION SHAFT SPUR GEAR BEARING CUP BEARING CONE SPUR GEAR SPUR GEAR SNAP RING SNAP RING SNAP RING SNAP RING HOUSING HOUSING CAP SCREW BEARING CUP BEARING CONE SHIM SHIM SHIM SPACER

1 1 1 1 28 106 1 1 8 1 AR AR AR 1 2 2 2 2 2 1 1 1 2 2 1 1 1 AR AR AR 1 1 50 1 1 AR AR AR 1

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05)

SERIAL NO.

REMARKS

(62 TOOTH SPLINE AXLE SHAFT) (FINAL DRIVE) M16 X 60 17 X 34 X 4 MM (OUTER COVER) (AXLE) M10 X 25 (THIRD REDUCTION SHAFT QUILL) (.003 INCH) (.0762MM) (.005 INCH) (.1270MM) (.101 INCH) (2.5654MM)

(TAPERED ROLLER) (TAPERED ROLLER) (THIRD REDUCTION PINION) (11 TEETH THIRD REDUCTION PINION SHAFT) 62 TEETH FINAL DRIVE) (50 TEETH SECOND REDUCTION) (64 TEETH AND 48 TEETH CLUSTER GEAR) (INTERNAL) (.125INCH) (3.1750MM) (EXTERNAL) (.115INCH) (2.9210MM) (EXTERNAL) (.105INCH) (2.6670MM) (EXTERNAL) (LEFT INNER HOUSING) (RIGHT INNER HOUSING) M16 X 55 (.005 INCH) (.1270MM) (.007 INCH) (.1778MM) (.010 INCH) (.2540 MM) (AXLE SHAFT RETAINER PLATE)

0201-3 PN=57


0201-4 AXLES AND SUSPENSION SYSTEMS

2

DRIVE AXLE HOUSING AND SUPPORT 0201 FINAL DRIVES - CONTINUED TP67767

-UN-05OCT00

THIS PARTS LISTING IS CONTINUED

0201-4

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=58


0201-5 AXLES AND SUSPENSION SYSTEMS

2

DRIVE AXLE HOUSING AND SUPPORT 0201 FINAL DRIVES

KEY

35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

PART NO.

19M8035 T175551 T180584 T169108 T214596 AT320692 T179675 T178266 T167841 T169107 T178075 JD8924 T178076 T169109 T178268 ........ T169116 T38489 AT223909 R26906 38H1162 T77932 T178265 24M7353 14H1058 AT222219 AT222218

PART NAME

QTY.

CAP SCREW COVER PIN BRAKE DISK BEARING CUP BEARING CONE SPUR GEAR SHAFT COMPRESSION SPRING BRAKE DISK BEARING CUP BEARING CONE SNAP RING BRAKE DISK GASKET PISTON O-RING O-RING PISTON O-RING ADAPTER FITTING O-RING ROD WASHER NUT DRIVE DRIVE

4 1 2 6 1 1 1 1 20 1 1 1 1 6 1 1 1 1 1 1 1 1 4 4 4 1 1

700J CRAWLER DOZER (S.N. -139435)

PC9473

(04-AUG-05)

SERIAL NO.

REMARKS

M16 X 35 (AXLE) (ROTATING) (SUB FOR JD8230, THIS APPLICATION) (SUB FOR JD8194, THIS APPLICATION) (INPUT SHAFT 13 TEETH) (13 TEETH SPLINED) (PRIMARY) (TAPER ROLLER) (INTERNAL) (STATIONARY DISK) (SUB AT223909) (BRAKE)

(MOTOR MOUNT) 20 X 34 X 3 MM 19.050 MM (LEFT FINAL DRIVE) (NOT ILLUSTRATED) (RIGHT FINAL DRIVE)

0201-5 PN=59


0201-6 AXLES AND SUSPENSION SYSTEMS

2

DRIVE AXLE HOUSING AND SUPPORT 0201 FINAL DRIVE DRAIN PLUG GUARD KIT T203643

0201-6

-UN-01OCT04

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(13-APR-07) PN=60


0201-7 AXLES AND SUSPENSION SYSTEMS

2

DRIVE AXLE HOUSING AND SUPPORT 0201 FINAL DRIVE DRAIN PLUG GUARD KIT

KEY

1 2 3 4 5 6

PART NO.

AT300952 14M7328 19M8035 24M7241 19M9313 AT300953 AT300954

PART NAME

QTY.

KIT LOCK NUT CAP SCREW WASHER CAP SCREW GUARD GUARD

700J CRAWLER DOZER (S.N. -139435)

1 2 8 14 4 1 1

PC9473

(13-APR-07)

SERIAL NO.

REMARKS

(WHOLE GOODS) (FINAL DRIVE DRAIN PLUG GUARDS) M16 M16 X 35 17 X 34 X 4 MM M16 X 110 (RH WELDMENT) (LH WELDMENT)

0201-7 PN=61


0315-2 TRANSMISSION 3

CONTROLS 0315 TRANSMISSION CONTROL LEVER (FNR) T207704

0315-2

-UN-04FEB05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(04-AUG-05) PN=62


0315-3 TRANSMISSION 3

CONTROLS 0315 TRANSMISSION CONTROL LEVER (FNR)

KEY

PART NO.

PART NAME

QTY.

1 2 3

AT219793 AT222609 ........

GRIP WIRING HARNESS COVER

4 5 7 8 9 10 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63

T176136 AT222608 34H266 AT222606 R44302 T204071 AT169374 14H860 T30637 T176172 T176169 T176173 T176168 T176170 T176171 AT220709 AT220706 AT48548 14H882 AT46597 AT220879 T176137 U15980 AT220702 T176149 T176150 T177605 T177604 T176157 AT220708 T26257 T176152 R39090 T177602 T177603 T176154 14H1076 T176147 T176148 AT220707 AT221854 R26448 AT86950 T176155 T176146 T176145 AT220711 AT220710 AT222803 AT220704 T176143 T176144 AT220703 T176158 T178767 ........ AT220855 19M7865 AT304326

BOLT KIT SPRING PIN CLAMP TIE BAND LABEL BALL JOINT NUT NUT SPRING SPACER SPRING WASHER SPRING SPRING SPRING ASSEMBLY LINKAGE BALL JOINT NUT BALL JOINT POTENTIOMETER SCREW O-RING BEARING WASHER PLATE WASHER SCREW SCREW LEVER O-RING SCREW NEEDLE ROLLER SPACER SPACER SPRING NUT CAM CAM COVER HOUSING O-RING SWITCH PLATE PLUG UNIVERSAL DRIVESHAFT BEARING SEAL BRACKET SEAL SPACER UNIVERSAL DRIVESHAFT BEARING POST POST PLATE BOOT SCREW STEERING CONTROLLER

64 65 70 72

1 1 1 4 1 3 1 AR 1 1 1 2 1 2 1 2 1 1 1 1 1 2 1 2 4 2 3 2 1 1 1 2 1 2 7 1 1 1 1 2 1 1 1 1 1 1 1 2 1 2 2 1 2 1 1 1 3 1 1 1 4 1

SERIAL NO.

REMARKS

(WIRING HARNESS WITH SWITCH AND COVER) (SUB T178768) (SUB FOR AT222804) (SWITCH BOOT) (GRIP FASTENER HARDWARE KIT) 5/32" X 1" (FORWARD, NEUTRAL AND REVERSE LABEL) (BEARING) 1/4" (LOCK)

(STEPPED WASHER) (PACK) (ROD END ASSEMBLY) 5/16" (ROTARY SENSOR) (INCLUDES SCREWS AND O-RING) (5MM) 0.801" X 0.070" (NEEDLE) (DETENT SPACER) (DETENT)

(DETENT ASSEMBLY) 0.101" X 0.070" (BEARING)

3/8" (SHAFT DETENT) (CAM NEUTRAL SWITCH) (CAM ASSEMBLY) (SLC BODY WITH BEARINGS) 0.468" X 5/64" (NEUTRAL START) (SPRING) (SEAL) (SHAFT) (NEEDLE) (LIP) (SLC SPEED IN GRIP KIT) (LIP) (BLOCK BEARING) (SHAFT) (NEEDLE) (MOUNTING) (EXTENDED THREAD) (MOUNTING) ( AT307105 NOT SERVICED) (ASSEMBLY) M8 X 16 (TRANSMISSION/HYDROSTATIC CONTROL LEVER) (CONVENIENCE ASSEMBLY)

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(07-SEP-06)

0315-3 PN=63


0325-2 TRANSMISSION 3

INPUT DRIVE SHAFTS AND U-JOINTS 0325 FLYWHEEL COUPLER T203483

0325-2

-UN-14JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(07-SEP-06) PN=64


0325-3 TRANSMISSION 3

INPUT DRIVE SHAFTS AND U-JOINTS 0325 FLYWHEEL COUPLER

KEY

1 2 3

PART NO.

19H2633 AT301442 19M8448

PART NAME

QTY.

CAP SCREW TORSIONAL DAMPER SCREW

700J CRAWLER DOZER (S.N. -139435)

PC9473

8 1 1

(07-SEP-06)

SERIAL NO.

REMARKS

3/8" X 1-1/2" M12 X 35

0325-3 PN=65


0355-2 TRANSMISSION 3

VARIABLE SPEED DRIVES 0355 TANDEM PUMP COMPONENTS T203571

0355-2

-UN-20NOV04

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(12-APR-06) PN=66


0355-3 TRANSMISSION 3

VARIABLE SPEED DRIVES 0355 TANDEM PUMP COMPONENTS

KEY

PART NO.

PART NAME

QTY.

1

AT304718

PUMP

1

2 3 4 5 6 7

AT330449 AT226441 AT304672 AT173188 RE151096 AT223218 T226424

PUMP CAP CONTROL VALVE KIT CYLINDER PRESSURE RELIEF VALVE FLANGE

1 1 1 1 2 1 2

10 11 12 13 14 16

T175376 R151067 T222125 T178726 AT220778 AT334796 AT301762 R99702 AT304714

RETAINER COVER COVER SHAFT FLOW CONTROL HYD. VALVE FITTING PLUG SENSOR O-RING PUMP

1 1 1 1 2 AR 1 2 1

17

AT330450 N206810

PUMP SHAFT

1 1

23 24 26

T176240 T176241 T175296

SCREW WASHER BRACKET

4 4 1

8 9

700J CRAWLER DOZER (S.N. -139435)

PC9473

(07-SEP-06)

SERIAL NO.

-120536

REMARKS

(REMANUFACTURED) (FRONT AXIAL PISTON HYDROSTATIC PUMP)

120537-

-120536 120537-

(ELECTRONIC DISPLACEMENT CONTROL) (FILTER) (SERVO CAN) (HYDROSTATIC NEUTRAL CHARGE) (SUB FOR T180379) (FRONT PUMP)( T155694 WASHER NO LONGER NEEDED) (SEAL PLATE) (HYDROSTATIC PUMP SIDE) (HYDROSTATIC PUMP FRONT SHAFT) (HYDROSTATIC MULTI-FUNCTION RELIEF VALVE) (SUB FOR R27218, THIS APPLICATION) (HYDROSTATIC PUMP SPEED SENSOR) (FRONT PUMP)

-120536 120537-

(REMANUFACTURED) (REAR AXIAL PISTON HYDROSTATIC PUMP) (REMANUFACTURED) (HYDROSTATIC REAR PUMP SHAFT)(NOT ILLUSTRATED )

0355-3 PN=67


0355-4 TRANSMISSION 3

VARIABLE SPEED DRIVES 0355 HYDROSTATIC PUMP CHARGING SYSTEM AND FILTRATION MANIFOLD T203572

0355-4

-UN-20NOV04

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=68


0355-5 TRANSMISSION 3

VARIABLE SPEED DRIVES 0355 HYDROSTATIC PUMP CHARGING SYSTEM AND FILTRATION MANIFOLD

KEY

PART NO.

PART NAME

QTY.

1 2 3 5 6 7

T167226 AT214844 N203952 T210527 T155964 T226424

COUPLING PLATE O-RING SCREW WASHER FLANGE

1 1 1 4 4 1

8 9 10 11 12 13 15 17 18 19 20

T179639 AT223217 AT223216 T179637 T179638 T155677 T72570 AT334796 AT173188 N203486 AN220311

SCREW COVER OIL PUMP PIN SHAFT KEY O-RING FITTING PLUG KIT BUSHING SEAL KIT

6 1 1 1 1 1 1 1 1 1 1

700J CRAWLER DOZER (S.N. -139435)

PC9473

(07-SEP-06)

SERIAL NO.

REMARKS

(RETAINING) (SUB FOR T156000) (SUB FOR T180379) ( T155694 WASHER NO LONGER NEEDED) (CHARGE PUMP COVER ASSEMBLY) (CHARGE PUMP) (CHARGE PUMP) (SUB FOR R27218, THIS APPLICATION) (FILTRATION MANIFOLD) (OVERHAUL)(PARTS INCLUDED ON OTHER PAGES)

0355-5 PN=69


0355-6 TRANSMISSION 3

VARIABLE SPEED DRIVES 0355 TANDEM PUMPS T165050

0355-6

-UN-10FEB03

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=70


0355-7 TRANSMISSION 3

VARIABLE SPEED DRIVES 0355 TANDEM PUMPS

KEY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

PART NO.

PART NAME

QTY.

19M8627 T175376 R150997 T223612 R151088 AT330297 AT330297 N203491 P42061 AT220778 AT301762 AT334796

SCREW RETAINER SEAL SEAL O-RING SEAL KIT SEAL KIT O-RING O-RING FLOW CONTROL HYD. VALVE SENSOR FITTING PLUG

3 1 1 1 1 1 1 2 2 2 1 1

AT334796 AH123403 T64769 T59014 R27390 AT223218 T176253 T176252 T176249 T176254 AN220311

FITTING PLUG SCREEN DRAIN PLUG O-RING NUT PRESSURE RELIEF VALVE POPPET SPRING PIPE PLUG NUT SEAL KIT

3 3 1 2 1 1 1 1 1 2 1

700J CRAWLER DOZER (S.N. -139435)

PC9473

(07-SEP-06)

SERIAL NO.

-120536 120537-120536 120537-

REMARKS

M6 X 20, (CAP) (RETAINING PLATE) (LIP) (SUB FOR AT220774) (SHAFT SEAL ASSEMBLY)

(MULTI-FUNCTION) (SPEED)(FRONT PUMP) (SUB FOR R27218, THIS APPLICATION) (REAR PUMP) (SUB FOR R27218, THIS APPLICATION) (FILTER)

(CHARGE)(FRONT PUMP ONLY) (CHARGE RELIEF) (CHARGE RELIEF VALVE PLUG) (OVERHAUL)(PARTS INCLUDED ON OTHER PAGES)

0355-7 PN=71


0355-8 TRANSMISSION 3

VARIABLE SPEED DRIVES 0355 HYDROSTATIC CHARGE HOUSING TP52071

0355-8

-UN-05JAN99

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=72


0355-9 TRANSMISSION 3

VARIABLE SPEED DRIVES 0355 HYDROSTATIC CHARGE HOUSING

KEY

1 2 3 4 5 6 7 8 9

PART NO.

R151078 R150986 N203486 AT226441 19M8123 24H1136 AT214861 AT214860 AN220311

PART NAME

QTY.

GASKET BEARING BUSHING CAP SCREW WASHER LUG SPACER SEAL KIT

700J CRAWLER DOZER (S.N. -139435)

1 1 1 1 2 1 1 1 1

PC9473

(03-FEB-05)

SERIAL NO.

REMARKS

(END CAP) (JOURNAL) (END ASSEMBLY) M8 X 45 11/32" X 11/16" X 0.065" (LIFTING BRACKET)(REAR PUMP ONLY) (OVERHAUL)(PARTS INCLUDED ON OTHER PAGES)

0355-9 PN=73


0355-10 TRANSMISSION 3

VARIABLE SPEED DRIVES 0355 HYDROSTATIC PUMP LIMITATION CONTROL, DRIVE SHAFT, AND SIDE TP52072

0355-10

COVER ASSEMBLY

-UN-07JAN99

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=74


0355-11 TRANSMISSION 3

VARIABLE SPEED DRIVES 0355 HYDROSTATIC PUMP LIMITATION CONTROL, DRIVE SHAFT, AND SIDE

KEY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

PART NO.

T177597 T15509 N206810 T178726 R151103 T176262 RE151101 R151097 T35580 19M7932 RE151096 T177595 AT220771 E80224 RE151074 T155641 T155640 T64769 R151067 T222125 R151069 R151097 T35580 19M7932 RE151096 R151072 AN220311

PART NAME

QTY.

BEARING SNAP RING SHAFT SHAFT PISTON RING O-RING PISTON REPLACEMENT KIT O-RING O-RING CAP SCREW CYLINDER POST BRACKET O-RING INSERT SCREW NUT DRAIN PLUG COVER COVER SHIM O-RING O-RING CAP SCREW CYLINDER SPRING SEAL KIT

700J CRAWLER DOZER (S.N. -139435)

PC9473

(12-APR-06)

1 1 1 1 2 2 1 1 1 3 1 2 1 1 1 6 2 1 1 1 2 1 1 3 1 2 1

SERIAL NO.

COVER ASSEMBLY

REMARKS

(REAR) (FRONT) (SERVO PISTON) M8 X 16 (SERVO CYLINDER KIT) (GUIDE) (LEVELOR) (SIDE COVER)

-120536 120537-

(SIDE)

M8 X 16 (SERVO CYLINDER KIT) (COMPRESSION) (OVERHAUL)(PARTS INCLUDED ON OTHER PAGES)

0355-11 PN=75


0355-12 TRANSMISSION 3

VARIABLE SPEED DRIVES 0355 HYDROSTATIC PUMP HOUSING, SWASHPLATE, PISTON AND CYLINDER BLOCK ASSEMBLY T203574

0355-12

-UN-20NOV04

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=76


0355-13 TRANSMISSION 3

VARIABLE SPEED DRIVES 0355 HYDROSTATIC PUMP HOUSING, SWASHPLATE, PISTON AND CYLINDER BLOCK ASSEMBLY

KEY

1 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

PART NO.

R726R R151062 RE159656 R151065 T176242 T223607 AT214873 T24199 AT214874 AT220770 R151066 R151075 T176243 T176244 T176245 RE151064 AT330299 R151063 T176259 T176258 T176256 T176257 T176260 R151099 N220940 AN220419 T177594 T176261 AT221619 AT224344 AN220311

PART NAME

QTY.

DOWEL PIN BEARING PIN LINK SWASH PLATE SWASH PLATE GUIDE WASHER PIN FASTENER ACTUATOR SPRING CLAMP SCREW SCREW LINK YOKE SWASH PLATE PLATE RING PLATE SPRING SPRING WASHER RING BEARING GUIDE PISTON SPACER SCREW CYLINDER CYLINDER BLOCK SEAL KIT

700J CRAWLER DOZER (S.N. -139435)

PC9473

2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 9 4 4 1 1 1

(12-APR-06)

SERIAL NO.

-120536 120537-

REMARKS

(CAGE LOCATOR) (VARIABLE) (SWASHPLATE) (SPIRAL) (SERVO ARM) (SLIDER BLOCK)

-120536 120537-

(FEEDBACK) (SWASHPLATE ASSEMBLY) (RETAINING) (SPRING RETAINER) (SEAT) (SPEED) (SLIPPER GUIDE) (SLIPPER) (WELDED PISTON ASSEMBLY) (CYLINDER BLOCK ASSEMBLY WITH SPEED RING) (KIT) (OVERHAUL)(PARTS INCLUDED ON OTHER PAGES)

0355-13 PN=77


0355-14 TRANSMISSION 3

VARIABLE SPEED DRIVES 0355 HYDROSTATIC PUMP DISPLACEMENT CONTROL VALVE T203575

0355-14

-UN-20NOV04

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=78


0355-15 TRANSMISSION 3

VARIABLE SPEED DRIVES 0355 HYDROSTATIC PUMP DISPLACEMENT CONTROL VALVE

KEY

1 2 3 4 6 7 9

PART NO.

19M7600 T164365 T200765 R151090 AT304672 19M8541 AT304671

PART NAME

QTY.

SCREW O-RING O-RING GASKET HYD ACTUATED CONTROL VALVE SCREW HYD ACTUATED CONTROL VALVE

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05)

4 3 1 1 1 6 1

SERIAL NO.

REMARKS

M5 X 12 (CONTROL) (ELECTRONIC DISPLACEMENT) M6 X 50 (PRESSURE CONTROL PILOT VALVE)

0355-15 PN=79


0355-16 TRANSMISSION 3

VARIABLE SPEED DRIVES 0355 RIGHT AND LEFT HAND HYDROSTATIC DRIVE MOTORS TP67595

0355-16

-UN-09NOV99

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=80


0355-17 TRANSMISSION 3

VARIABLE SPEED DRIVES 0355 RIGHT AND LEFT HAND HYDROSTATIC DRIVE MOTORS

KEY

1 2 3

PART NO.

14H793 24M7353 AT315017

PART NAME

QTY.

NUT WASHER MOTOR

700J CRAWLER DOZER (S.N. -139435)

8 8 2

PC9473

(03-FEB-05)

SERIAL NO.

REMARKS

3/4" 20 X 34 X 3 MM (REMANUFACTURED) (HYDROSTATIC)

0355-17 PN=81


0355-18 TRANSMISSION 3

VARIABLE SPEED DRIVES 0355 HYDROSTATIC TRACK DRIVE MOTOR AND SHAFT T207186

0355-18

-UN-20JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=82


0355-19 TRANSMISSION 3

VARIABLE SPEED DRIVES 0355 HYDROSTATIC TRACK DRIVE MOTOR AND SHAFT

KEY

PART NO.

PART NAME

QTY.

1 2 3

T162012 19M8823 ........

O-RING SCREW FLANGE

1 8 1

4 5 6 7 8 9 10 11 12 13 14

........ T155729 AT214702 T155732 AT224201 AT300970 T72570 AT214566 AT173306 AT181917 ........

SEAL O-RING SEAL KIT PISTON RING KIT SHAFT KIT O-RING PLUG BEARING SPOOL VALVE HOUSING

1 1 1 1 1 1 2 1 1 1 1

15 16 17 18 19 20 21

AT173307 AT301762 T188306 T210501 M74600 R726R T164318

CYLINDER BLOCK SENSOR BOLT GUARD O-RING DOWEL PIN RING

1 1 6 1 1 2 1

SERIAL NO.

REMARKS

M12 X 35, (M12 X 35) (SUB FOR AT214541) (SUB AT315017) (COMPLETE REMANUFACTURED MOTOR) (LIP SEAL) (SUB AT214702) (SUB FOR AT173304) (SHAFT) (HYDROSTATIC MOTOR SYNCH SHAFT) (BEARING PLATE) (RETAINER SPINDLE VALVE SEGMENT) (SUB AT315017) (COMPLETE REMANUFACTURED MOTOR) (HYDROSTATIC MOTOR SPEED)

(MAGNETIC SPEED SENSOR)

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(13-APR-07)

0355-19 PN=83


0355-20 TRANSMISSION 3

VARIABLE SPEED DRIVES 0355 HYDROSTATIC TRACK DRIVE MOTOR END CAP AND FEEDBACK SPRING TX1014295

0355-20

-UN-28OCT06

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(05-MAR-07) PN=84


0355-21 TRANSMISSION 3

VARIABLE SPEED DRIVES 0355 HYDROSTATIC TRACK DRIVE MOTOR END CAP AND FEEDBACK SPRING

KEY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35

PART NO.

19M8447 AT306983 T158241 T155731 AT224194 M45387 M74600 AT182399 T165492 T176383 R28782 T190502 T155741 AT196462 T162854 M74600 AT180814 AT334796 T165535 AT184869 T155987 T155757 T155735 AT184822 T155736 T155737 T210502 T210503 T210497 T210500 T165536 T210385 T210386 19M8489 19M8580

PART NAME

QTY.

SCREW COVER O-RING GASKET PRESSURE RELIEF VALVE O-RING O-RING SEAT O-RING PLUG O-RING CAP PISTON PLATE RING O-RING PLUG FITTING PLUG O-RING PLUG O-RING O-RING LEVER KIT SET SCREW SET SCREW WASHER CAP SCREW AND NUT GUIDE SPRING RETAINER SPRING SEAT SCREW SCREW

700J CRAWLER DOZER (S.N. -139435)

PC9473

(07-SEP-06)

4 1 1 1 1 1 1 1 1 2 2 1 1 2 1 7 2 5 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 4 4

SERIAL NO.

REMARKS

M10 X 35 (SERVO PISTON COVER ASSEMBLY) (CHARGE PRESSURE RELIEF VALVE KIT) (STEM INSERT)

(HYDROSTATIC MOTOR END CAP) (LOOP FLUSHING) (SPRING SEAT)

(SUB FOR AT184868, THIS APPLICATION)

(FEEDBACK) (SERVO PISTON)

M12 X 65 M12 X 50

0355-21 PN=85


0355-22 TRANSMISSION 3

VARIABLE SPEED DRIVES 0355 HYDROSTATIC TRACK DRIVE MOTOR CONTROL T212909

0355-22

-UN-20JUL05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(13-APR-07) PN=86


0355-23 TRANSMISSION 3

VARIABLE SPEED DRIVES 0355 HYDROSTATIC TRACK DRIVE MOTOR CONTROL

KEY

PART NO.

PART NAME

QTY.

1 2 3 4 5 6

AT313403 T155975 T190503 T165535 AT184869 ........

SPOOL VALVE O-RING GASKET O-RING PLUG SPOOL VALVE

1 2 1 2 2 1

7

........

ORIFICE

1

8 9 10 11

M74600 AT334796 19M8823 ........

O-RING FITTING PLUG SCREW BRACKET

1 1 4 1

13 14

T218570 T188306 T188306 R44302 ........

BRACKET BOLT BOLT TIE BAND SOLENOID VALVE

1 3 4 1 1

15 16 17 18 19

T210495 T223395 AT307543 AT334533 AT334532

HOUSING SPOOL VALVE SOLENOID VALVE COIL KIT KIT

1 1 1 1 1

12

700J CRAWLER DOZER (S.N. -139435)

PC9473

(13-APR-07)

SERIAL NO.

REMARKS

(BUSHING ASSEMBLY)

(OLD DESIGN)(SHUTTLE VALVE SPOOL) (SUB T223395) (SUB FOR T210494 AND T210496) (OLD DESIGN) (SUB T223395) (SUB FOR T210494 AND T210496)

-111920

(SUB FOR AT184868, THIS APPLICATION) M12 X 35, (M12 X 35) (SUB FOR AT214541) (SOLENOID GUARD) (SUB T218570) (ALSO ORDER T188306) (SUB FOR T177155)

111921-111920 111921(OLD DESIGN) (SUB AT307543, AT334532 AND AT334533) (TRANSMISSION/HYDROSTATIC SPEED SELECTOR SOLENOID)

0355-23 PN=87


0363-2 TRANSMISSION 3

TRANSMISSION OIL LINES 0363 BRAKE VALVE HOSES T204477

0363-2

-UN-14JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=88


0363-3 TRANSMISSION 3

TRANSMISSION OIL LINES 0363 BRAKE VALVE HOSES

KEY

1 2 3 4 5 8 9 10 11

PART NO.

38H1004 R26448 T77613 AM102420 AM102487 AT314757 AT314759 AT314756 AT314758

PART NAME

QTY.

ELBOW FITTING O-RING O-RING HYDR.QUICK COUPLER PLUG HYD. QUICK-CONNECT COUPLER HYDRAULIC HOSE - FABRICATE HYDRAULIC HOSE - FABRICATE HYDRAULIC HOSE - FABRICATE HYDRAULIC HOSE - FABRICATE

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05)

1 1 1 1 1 1 1 1 1

SERIAL NO.

REMARKS

0.468" X 5/64" 0.364" X 0.070" (BRAKE CHARGE SUPPLY) (BRAKE VALVE TANK LINE) (TO RIGHT BRAKE) (TO LEFT BRAKE)

0363-3 PN=89


0363-4 TRANSMISSION 3

TRANSMISSION OIL LINES 0363 TRANSMISSION HIGH PRESSURE HOSES T203997

0363-4

-UN-01FEB05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=90


0363-5 TRANSMISSION 3

TRANSMISSION OIL LINES 0363 TRANSMISSION HIGH PRESSURE HOSES

KEY

PART NO.

PART NAME

QTY.

1 2 3 4 5

H122182 24M7240 19H2563 T149315 AT333064

FLANGE FITTING WASHER CAP SCREW ADAPTER FITTING HYDRAULIC HOSE

16 32 32 2 1

6 7 8 9 10 11

AT220269 T76938 T174191 T78313 AT220268 AT333766

HYDRAULIC HOSE O-RING ADAPTER FITTING O-RING HYDRAULIC HOSE HYDRAULIC HOSE

1 4 2 8 1 1

700J CRAWLER DOZER (S.N. -139435)

PC9473

(12-APR-06)

SERIAL NO.

REMARKS

13 X 25 X 3 MM 7/16" X 1-3/4" (REAR PUMP PORT)(FORWARD) (REAR PUMP TO LH MOTOR PORT)(FORWARD) (SUB FOR AT220266) (FRONT PUMP TO RH MOTOR PORT)(REVERSE) 0.926" X 0.070" (FRONT AND REAR PUMP PORTS)(REVERSE) 1.296" X 0.139" (FRONT PUMP TO RH MOTOR PORT)(FORWARD) (REAR PUMP TO LH MOTOR PORT)(REVERSE) (SUB FOR AT219938)

0363-5 PN=91


0363-6 TRANSMISSION 3

TRANSMISSION OIL LINES 0363 TRANSMISSION/HYDROSTATIC DIAGNOSTIC PLUMBING T212709

0363-6

-UN-15JUL05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(04-AUG-05) PN=92


0363-7 TRANSMISSION 3

TRANSMISSION OIL LINES 0363 TRANSMISSION/HYDROSTATIC DIAGNOSTIC PLUMBING

KEY

1 2 3 4 6 7 8 9 10 12 13 14 15

PART NO.

24M7145 ........ 38H1009 R26448 T204422 T230142 T77814 14H832 38H1414 AT321257 AT225112 R28782 U44115 ........

PART NAME

QTY.

WASHER CONDUIT ELBOW FITTING O-RING LABEL LABEL O-RING NUT FITTING HYDRAULIC HOSE - FABRICATE ADAPTER FITTING O-RING FITTING PLUG HOSE KIT

700J CRAWLER DOZER (S.N. -139435)

PC9473

(13-APR-07)

8 AR 4 4 1 1 7 4 4 1 1 1 1 1

SERIAL NO.

REMARKS

15 X 24 X 2.500 MM (CUT FROM BULK 56 INCH 1423MM PARKER PS-B-33) -137828 137829-

(REMOTE TRANSMISSION TEST BANK) 9/16" (BULKHEAD)

(ORDER INDIVIDUAL COMPONENTS)( AT322752 NO LONGER AVAILABLE)

0363-7 PN=93


0363-8 TRANSMISSION 3

TRANSMISSION OIL LINES 0363 HYDROSTATIC SUCTION HOSE T204490

0363-8

-UN-19JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=94


0363-9 TRANSMISSION 3

TRANSMISSION OIL LINES 0363 HYDROSTATIC SUCTION HOSE

KEY

1 2 3 4 5 6 7

PART NO.

AT220327 38H1164 AT209303 38H1358 R29936 T76938 T78612 AT208682

PART NAME

QTY.

HYDRAULIC HOSE - FABRICATE ADAPTER FITTING TEE FITTING TUBE NUT O-RING O-RING O-RING HYDRAULIC HOSE - FABRICATE

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05)

1 2 1 1 2 2 2 1

SERIAL NO.

REMARKS

(FROM RESEVOIR TO FRONT AND REAR PUMPS) (FITTING) (NOT ILLUSTRATED)

1" X 291 MM X 1-1/4"

0363-9 PN=95


0363-10 TRANSMISSION 3

TRANSMISSION OIL LINES 0363 TRANSMISSION COOLER BYPASS PLUMBING T207755

0363-10

-UN-01FEB05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=96


0363-11 TRANSMISSION 3

TRANSMISSION OIL LINES 0363 TRANSMISSION COOLER BYPASS PLUMBING

KEY

1 2 3 4 5 6 7 8

PART NO.

PART NAME

QTY.

9 10 11 12 13 14 15

14M7274 14M7517 19M7572 19M8093 24M7239 24M7296 AT136909 RE48419 51M7041 38H1027 38H1194 AT223739 R29936 T76938 T77858 AT211239

NUT LOCK NUT CAP SCREW CAP SCREW WASHER WASHER CLAMP SENSOR O-RING TEE FITTING ADAPTER FITTING FITTING O-RING O-RING O-RING HYDRAULIC HOSE - FABRICATE

1 2 1 2 4 2 1 1 1 1 1 1 8 6 7 1

16 17 18 19 20 21 22 23 24 25 26

AT211255 AT220277 AT220278 AT220279 38H1101 R26773 T78784 38H1162 R26906 T77932 AT223937

HYDRAULIC HOSE - FABRICATE HYDRAULIC HOSE - FABRICATE HYDRAULIC HOSE - FABRICATE HYDRAULIC HOSE - FABRICATE ELBOW FITTING O-RING O-RING ADAPTER FITTING O-RING O-RING FLOW CONTROL HYD. VALVE

1 1 1 1 1 1 1 1 1 5 1

AT220846

KIT

1

19H2336 M40333

CAP SCREW LOCK NUT

4 4

T102419 38H1032 38H1447 AT225122 AT225123 R44302 38H1164 38H1098 38H1216 38H1019 38H1097 38H1163 U12547

O-RING TEE FITTING ADAPTER FITTING HYDRAULIC HOSE - FABRICATE HYDRAULIC HOSE - FABRICATE TIE BAND ADAPTER FITTING ELBOW FITTING ADAPTER FITTING TEE FITTING ELBOW FITTING ADAPTER FITTING O-RING

2 1 2 1 1 1 1 1 2 1 1 1 2

31 32 33 34 35 36 37 38 39 40 41 42

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05)

SERIAL NO.

REMARKS

M10 M10 M10 X 45 M10 X 100 10.700 X 21 X 2.500 MM 10.500 X 30 X 2.500 MM (TEMPERATURE) 11.300 X 2.200 MM, (NOT ILLUSTRATED) (TEE-FITTING) 29.743 X 2.946 MM 23.520 X 1.778 MM 18.771 X 1.778 MM 1-7/16" X 959 MM X 1-7/16", (TO HYDROSTATIC RESERVOIR) (HYDROSTATIC MOTOR DRAIN HOSE) (FROM OIL COOLER) (TO OIL COOLER) (DRAIN HOSE MOTOR-BYPASS VALVE) 43.688 X 2.997 MM 37.821 X 1.778 MM 19.177 X 2.464 MM 15.596 X 1.778 MM (OIL COOLER THERMAL BYPASS VALVE) (INCLUDES (4) 19H2336, (2) T102419, AT220846, AND (4) M40333) (INCLUDES SPRING WHICH IS NOT SERVICED SEPARATELY) (OIL COOLER BYPASS VALVE REPAIR)(DOES NOT CONTAIN SPRING)(NOT ILLUSTRATED) 6.350 X 88.900 MM, (NOT ILLUSTRATED) 6.350 MM, (NUT, ELASTIC STOP)(TOP INSERT TYPE) (NOT ILLUSTRATED) 53.696 X 1.778 MM, (NOT ILLUSTRATED)

(NOT ILLUSTRATED) (OIL COOLER) (90 DEGREE SWIVEL ELBOW) 23.470 X 2.946 MM

0363-11 PN=97


0363-12 TRANSMISSION 3

TRANSMISSION OIL LINES 0363 HYDROSTATIC FILTER HOSES T204579

0363-12

-UN-07JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=98


0363-13 TRANSMISSION 3

TRANSMISSION OIL LINES 0363 HYDROSTATIC FILTER HOSES

KEY

2 10 11 12 13 14 15 16 18 19 20 21 22 24 25 26

PART NO.

R26448 AT207364 AT209299 AT225125 38H1162 R26906 T77932 38H1329 U12547 38H1018 38H1041 T77858 38H1193 AT226426 AT226427 R27212

PART NAME

QTY.

O-RING HYDRAULIC HOSE - FABRICATE HYDRAULIC HOSE - FABRICATE HYDRAULIC HOSE - FABRICATE ADAPTER FITTING O-RING O-RING ADAPTER FITTING O-RING TEE FITTING TEE FITTING O-RING ADAPTER FITTING HYDRAULIC HOSE - FABRICATE HYDRAULIC HOSE - FABRICATE FITTING

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05)

SERIAL NO.

REMARKS

2 1 2 1 3 6 8 1 1 2 1 3 1 1 1 1

0363-13 PN=99


0364-2 TRANSMISSION 3

TRANSMISSION FILTER, COOLER AND AUXILIARY RESERVOIR 0364 TRANSMISSION FILTER T204549

0364-2

-UN-01DEC04

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=100


0364-3 TRANSMISSION 3

TRANSMISSION FILTER, COOLER AND AUXILIARY RESERVOIR 0364 TRANSMISSION FILTER

KEY

2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

PART NO.

38H1037 T76938 R29936 38H1052 T77858 U44115 R28782 AT221680 14H778 12M7060 T175002 24M7239 19M7784 AH128450 R26448

PART NAME

QTY.

ELBOW FITTING O-RING O-RING ELBOW FITTING O-RING FITTING PLUG O-RING FILTER HEAD NUT WASHER HYDRAULIC FILTER WASHER SCREW PUSH SWITCH O-RING

700J CRAWLER DOZER (S.N. -139435)

PC9473

1 1 2 1 1 1 1 1 2 1 1 4 4 1 1

(03-FEB-05)

SERIAL NO.

REMARKS

(TO INPUT FILTER HOSE) (TO OUTPUT FILTER HOSE)

(4 INCH) 0.190" 5.300 MM (ELEMENT) 10.700 X 21 X 2.500 MM M10 X 20 (RESTRICTION INDICATOR)

0364-3

PN=101


0364-4 TRANSMISSION 3

TRANSMISSION FILTER, COOLER AND AUXILIARY RESERVOIR 0364 HYDROSTATIC RESERVOIR T204600

0364-4

-UN-21JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=102


0364-5 TRANSMISSION 3

TRANSMISSION FILTER, COOLER AND AUXILIARY RESERVOIR 0364 HYDROSTATIC RESERVOIR

KEY

PART NO.

PART NAME

QTY.

1 2 3 4 5 6

AT211118 AT186172 19M7938 24M7296 AT209110 AT307278

LOCK LATCH CAP SCREW WASHER HINGE COVER

1 1 4 5 2 1

7 8 9 10 11 12 13 14 16 17 18 19 20 21 22 23 24 25

AT307292 T197300 AT227279 M68628 R26906 38H1416 38H1012 T77857 AT223468 19M7417 24M7241 14M7274 T175361 R26773 T170935 T158583 AT220590 AT228533

GASKET KIT LABEL LEVEL GAUGE RIVET O-RING FITTING ELBOW FITTING O-RING COVER CAP SCREW WASHER NUT GROMMET O-RING DRAIN PLUG LABEL DOOR HYDROSTATIC RESERVOIR

1 1 1 4 1 1 1 1 1 4 4 1 1 1 1 1 1 1

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05)

SERIAL NO.

REMARKS

M10 X 20 10.500 X 30 X 2.500 MM (CLEAN OUT COVER) (INCLUDES HARDWARE AND GASKET KIT, AT307292) (INCLUDED WITH AT307278) (SIGHT GAUGE LABEL) (SIGHT GAUGE) (FOR ATTACHING LATCH TO DOOR) 0.755" X 0.097" (CAP) (FENDER) M16 X 65 17 X 34 X 4 MM M10 (FILLER PLUG) (NO WELDING LABEL) (HYDROSTATIC RESERVOIR)

0364-5

PN=103


0375-2 TRANSMISSION 3

AUTOMATIC CONTROL CIRCUITS 0375 MICROPROCESSOR TRANSMISSION CONTROL T204588

0375-2

-UN-14JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=104


0375-3 TRANSMISSION 3

AUTOMATIC CONTROL CIRCUITS 0375 MICROPROCESSOR TRANSMISSION CONTROL

KEY

1 2 3 4 5 6

PART NO.

19M9007 19M7796 37M7059 AT209965 AT224151 AT338903

PART NAME

QTY.

SCREW SCREW SCREW GROUND CABLE COVER TRANSMISSION CONTROLLER

700J CRAWLER DOZER (S.N. -139435)

PC9473

(13-APR-07)

1 4 6 1 1 1

SERIAL NO.

REMARKS

M6 X 12 M6 X 30 M5 X 12 150 MM (MICROPROCESSOR) (SUB FOR AT308928)

0375-3

PN=105


0375-4 TRANSMISSION 3

AUTOMATIC CONTROL CIRCUITS 0375 MEMORANDA

0375-4

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=106


0401-1 ENGINE

4

CRANKSHAFT AND MAIN BEARINGS 0401 CRANKSHAFT AND MAIN BEARINGS RGP10122

KEY

1 2 3 4 5 6 7 8 9 10 11

-UN-06NOV03

PART NO.

R48685 R505609 R120631 RE505921 ........ ........ ........ ........ RE65165 RE65911 ........ ........ ........ ........ RE65168 RE65912 R517471

PART NAME

QTY.

DOWEL PIN SHAFT KEY GEAR CRANKSHAFT BEARING BEARING BEARING BEARING BEARING KIT BEARING BEARING BEARING BEARING BEARING BEARING KIT THRUST BEARING WHEEL

700J CRAWLER DOZER (S.N. -139435)

PC9473

1 1 1 1 6 6 6 6 6 6 1 1 1 1 1 1 1

(03-FEB-05)

ENGINE SERIAL NO.

REMARKS

4 X 16 MM Z= 30 0.254MM (.010") US (MARKED R123562) 0.254MM (.010") US, (MARKED R130577) STD 0.254MM (.010") US (MARKED R123563) 0.254MM (.010") US, (MARKED R130574) (MARKED R123564) 0.254MM (.010") US, (MARKED R130575) STD 0.254MM (.010") US CRANKSHAFT TIMING

0401-1

PN=107


0401-2 ENGINE

4

CRANKSHAFT AND MAIN BEARINGS 0401 MEMORANDA

0401-2

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=108


0402-1 ENGINE

4

CAMSHAFT AND VALVE ACTUATING MEANS 0402 CAMSHAFT RGP9826

KEY

1 2

-UN-22JUL03

PART NO.

R133303 RE507149

PART NAME

QTY.

SHAFT KEY CAMSHAFT

700J CRAWLER DOZER (S.N. -139435)

ENGINE SERIAL NO.

REMARKS

1 1

PC9473

(03-FEB-05)

0402-1

PN=109


0402-2 ENGINE

4

CAMSHAFT AND VALVE ACTUATING MEANS 0402 ROCKER ARMS, SHAFT AND PUSH RODS RGP10401

KEY

1 2 3 4 5 6 7 8 9 10 11

-UN-27APR04

PART NO.

R54565 R123514 T20316 T20314 R123271 24M7346 R519767 14M7148 RE508317 R107731 R123565

0402-2

PART NAME

PLUG ROCKER ARM SHAFT WASHER SPRING STUD WASHER SUPPORT NUT ROCKER ARM PUSH ROD CAM FOLLOWER

QTY.

2 1 2 5 6 6 6 1 12 12 12

ENGINE SERIAL NO.

REMARKS

11 X 20 X 2 MM M10

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=110


0402-3 ENGINE

4

CAMSHAFT AND VALVE ACTUATING MEANS 0402 ROCKER ARM COVER TP62408

KEY

1 2 3 4 5 6

-UN-10MAY00

PART NO.

H23125 R123574 R123575 R121674 RE503027 RE520540

PART NAME

QTY.

PLUG NUT O-RING MEDALLION VALVE COVER GASKET KIT

700J CRAWLER DOZER (S.N. -139435)

ENGINE SERIAL NO.

REMARKS

6 6 6 1 1 1

PC9473

(03-FEB-05)

0402-3

PN=111


0402-4 ENGINE

4

CAMSHAFT AND VALVE ACTUATING MEANS 0402 TIMING GEAR COVER AND WATERPUMP RGP9593

0402-4

-UN-23APR03

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(04-AUG-05) PN=112


0402-5 ENGINE

4

CAMSHAFT AND VALVE ACTUATING MEANS 0402 TIMING GEAR COVER AND WATERPUMP

KEY

PART NO.

PART NAME

QTY.

1

RE519144

SENSOR

1

2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

51M7044 51M7044 RE517370 19M8291 19M8317 RE67239 R123417 R121424 R121411 19M7775 R123226 A364R R100369 51M7043 RE46685 RE505980 19M7863 19M7796 RE508566 14M7296 19M7801 19M7979 RE516340

O-RING O-RING FITTING SCREW SCREW SCREW GASKET O-RING COVER SCREW GASKET SNAP RING FILTER O-RING FITTING PLUG WATER PUMP SCREW SCREW INSERT FLANGE NUT SCREW SCREW KIT

1 1 1 1 6 1 1 1 1 3 1 1 2 1 1 1 5 3 1 6 1 2 1

25 26 27 28 29 30

R504734 19M8966 R131283 R114193 RE56369 R136516 R520132 19M7867 R504725 R520130

O-RING SCREW THRUST WASHER BUSHING GEAR GASKET GASKET SCREW COVER COVER

1 1 1 1 1 1 1 1 1 1

31 32

700J CRAWLER DOZER (S.N. -139435)

PC9473

(07-SEP-06)

ENGINE SERIAL NO.

REMARKS

(SUB FOR RE508195) (CRANKSHAFT POSITION SENSOR) 17.300 X 2.200 MM 17.300 X 2.200 MM M20 X 1.5, (SUB FOR RE501938) M8 X 35 M8 X 40

M6 X 16

M6 X 25 M6 X 30 (WATER PUMP INSERT REPAIR) M10 M8 X 60 M8 X 55 (MARKED RE52346 OR RE505515) (SUB FOR RE59810)

-555800 555801-555800 555801-

(USE WITH R504725) (USE WITH R520130) M8 X 25 (SUB RE515978, R520130 AND R520132)

0402-5

PN=113


0402-6 ENGINE

4

CAMSHAFT AND VALVE ACTUATING MEANS 0402 MEMORANDA

0402-6

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=114


0403-1 ENGINE

4

CONNECTING RODS AND PISTONS 0403 PISTON, CONNECTING RODS AND CONNECTING ROD BEARINGS TP49283

KEY

1 2 3 4 5 6 7 8 9 10 11 ..

-UN-17JUL95

PART NO.

R501124 R123960 RE500002 M41029 R123178 RE507852 ........ ........ AR65507 RE507920 RE65908 RE65909 RE527301

PART NAME

QTY.

SCREW BUSHING CONNECTING ROD SNAP RING PISTON PIN PISTON RING KIT PISTON CYLINDER LINER O-RING KIT PISTON-LINER KIT BEARING BEARING ENGINE OVERHAUL KIT

12 6 6 12 6 6 6 6 6 6 6 6 1

700J CRAWLER DOZER (S.N. -139435)

PC9473

(04-AUG-05)

ENGINE SERIAL NO.

REMARKS

(MARKED R500000)

(SUB RE507920) (SUB RE507920) (MARKED RE515372) .010" UNDERSIZE

0403-1

PN=115


0404-2 ENGINE

4

CYLINDER BLOCK 0404 CYLINDER BLOCK RGP10669

0404-2

-UN-08NOV04

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=116


0404-3 ENGINE

4

CYLINDER BLOCK 0404 CYLINDER BLOCK

KEY

1

2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 ..

PART NO.

........ 37H26 D2361R R132186 R114241 AT13740 15H623 RE508185 U13639 ........ ........ ........ R131182 R121043 R132518 19M8999 R48685 R116466 R119874 T18891 R26650 RE505501 R97185 ........ ........ T20168 T23474 R104592 RE57836 R55233 R111137 T173311

PART NAME

QTY.

CYLINDER BLOCK SCREW BALL BEARING CAP BEARING CAP DRAIN VALVE PIPE PLUG FITTING O-RING PLUG O-RING FITTING PLUG ORIFICE VALVE PLATE SCREW DOWEL PIN PLUG BUSHING PLUG DOWEL PIN BLEED VALVE O-RING BUSHING O-RING WASHER CAP SCREW PIPE PLUG PIPE PLUG PIPE PLUG SPRING HELICAL GEAR

700J CRAWLER DOZER (S.N. -139435)

PC9473

1 2 1 1 6 1 1 2 2 NA NA NA 6 1 1 2 4 1 1 2 2 1 1 NA NA 14 14 7 NA NA 1 1

(03-FEB-05)

ENGINE SERIAL NO.

REMARKS

(MARKED R504850) NO. 4 X 1/4" TYPE U, ENG. SERIAL NO. PLATE 1/2", (NOT SHOWN) (NOT SHOWN) (NOT SHOWN) 1/4"-18NPT 3/8" 1-5/8"-12UN 37.465 X 2.997 MM (1.475" X 0.118") M18 X 1.5 CAB HEATER PISTON COOLING JET ENGINE OIL BY-PASS CAMSHAFT THRUST M8 X 25 OD 30MM CAMSHAFT OD 16MM 9.525 X 25.400 MM (3/8" X 1") OIL PRESSURE REGULATING 15.469 X 3.531 MM (39/64" X 0.139")

1/8"-27NPT 1/2"-14NPT 1/4"-18NPT FOR HYDRAULIC PUMP W/O AUX DRIVE ADAPTER

0404-3

PN=117


0404-4 ENGINE

4

CYLINDER BLOCK 0404 FRONT PLATE AND IDLER GEAR RGP10435

0404-4

-UN-14JUN04

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=118


0404-5 ENGINE

4

CYLINDER BLOCK 0404 FRONT PLATE AND IDLER GEAR

KEY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

PART NO.

R134527 R134518 R136475 R123174 R120641 RE508932 R131206 34H288 19M8997 R123584 19M8966 R131283 R114193 RE56369 R114194 R101225 R116386 14M7298 PM38655

PART NAME

QTY.

PLATE STUD SCREW THRUST WASHER SHAFT GEAR THRUST WASHER SPRING PIN SCREW STUD SCREW THRUST WASHER BUSHING GEAR SHAFT THRUST WASHER STUD FLANGE NUT SEALANT

700J CRAWLER DOZER (S.N. -139435)

PC9473

1 2 4 1 1 1 1 1 1 4 1 1 1 1 1 1 3 3 AR

(04-AUG-05)

ENGINE SERIAL NO.

REMARKS

ID X OD = 22MM X 84MM OD 70MM Z = 49, (MARKED R505121) ID X OD = 11MM X 84MM 3/16" X 1-3/4" M10 X 65 M10 X 50 ID X OD = 11MM X 60MM OD 47.7MM Z = 43, (MARKED R120636) OD 44.5MM ID X OD = 22MM X 60MM M8 GASKET MAKER 515® (NON-CALIFORNIA ONLY)

0404-5

PN=119


0404-6 ENGINE

4

CYLINDER BLOCK 0404 SHORT BLOCK ASSEMBLY T146131

0404-6

-UN-09OCT01

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=120


0404-7 ENGINE

4

CYLINDER BLOCK 0404 SHORT BLOCK ASSEMBLY

KEY

1

PART NO.

RE518527

PART NAME

QTY.

SHORT BLOCK ASSEMBLY

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05)

1

ENGINE SERIAL NO.

REMARKS

(PISTON MARKED RE509540)

0404-7

PN=121


0404-8 ENGINE

4

CYLINDER BLOCK 0404 OVERHAUL KIT TP28491

0404-8

-UN-01JAN94

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=122


0404-9 ENGINE

4

CYLINDER BLOCK 0404 OVERHAUL KIT

KEY

1

PART NO.

RE507864

PART NAME

QTY.

ENGINE OVERHAUL KIT

1

700J CRAWLER DOZER (S.N. -139435)

PC9473

(04-AUG-05)

ENGINE SERIAL NO.

REMARKS

(PISTON MARKED RE515372)

0404-9

PN=123


0404-10 ENGINE

4

CYLINDER BLOCK 0404 AUXILIARY DRIVE COVER RGP10928

KEY

1 2 3

-UN-15MAR05

PART NO.

T20758 R135757 19M7790

0404-10

PART NAME

O-RING COVER SCREW

QTY.

1 1 2

ENGINE SERIAL NO.

REMARKS

107.620 X 2.616 MM (4.237" X 0.103") M12 X 35

700J CRAWLER DOZER (S.N. -139435)

PC9473

(12-APR-06) PN=124


0407-1 ENGINE

4

OILING SYSTEM 0407 ENGINE OIL FILLER INLET COVER TP53437

KEY

1 2 3

-UN-03APR97

PART NO.

RE67238 R116296 R136495

PART NAME

QTY.

SCREW COVER GASKET

700J CRAWLER DOZER (S.N. -139435)

4 2 2

PC9473

(04-AUG-05)

ENGINE SERIAL NO.

REMARKS

M8 X 20 (WITH PRE-APPLIED SEALANT)

0407-1

PN=125


0407-2 ENGINE

4

OILING SYSTEM 0407 ENGINE OIL PAN, DIPSTICK AND OIL FILL TUBE T191169

KEY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

-UN-16MAY03

PART NO.

R123354 RE504231 R502346 R132656 19M7868 19M7867 M1746T T13213 R47151 R27474 19M7799 R502725 19M7866 H130695 R502943 14M7298 19M7784

0407-2

PART NAME

GASKET DIPSTICK OIL TUBE OIL PAN SCREW SCREW DRAIN PLUG WASHER O-RING DRAIN PLUG SCREW PLUG SCREW CLAMP BRACKET FLANGE NUT SCREW

QTY.

1 1 1 1 6 26 1 1 1 1 4 2 1 1 1 1 1

ENGINE SERIAL NO.

REMARKS

M8 X 30 M8 X 25

M8 X 45 (SUB FOR R134240) M8 X 20 M8 M10 X 20, (SUB FOR 19M7783)

700J CRAWLER DOZER (S.N. -139435)

PC9473

(04-AUG-05) PN=126


0407-3 ENGINE

4

OILING SYSTEM 0407 MEMORANDA

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05)

0407-3

PN=127


0407-4 ENGINE

4

OILING SYSTEM 0407 OIL PUMP RGP10403

KEY

1 2 3 4 5 6 7 8 9

-UN-27APR04

PART NO.

19M8987 RE504914 R120638 14M7066 R97185 R121376 19M8986 RE69568 R61871

0407-4

PART NAME

SCREW OIL PUMP GEAR NUT O-RING TUBE SCREW OIL PUMP INTAKE O-RING

QTY.

2 1 1 1 1 1 2 1 1

ENGINE SERIAL NO.

REMARKS

M8 X 65 (MARKED R502687) Z=30 M12 15.469 X 3.531 MM (39/64" X 0.139") M8 X 100 24.990 X 3.530 MM (0.984" X 0.139")

700J CRAWLER DOZER (S.N. -139435)

PC9473

(04-AUG-05) PN=128


0407-5 ENGINE

4

OILING SYSTEM 0407 ENGINE OIL FILTER AND FILTER HEAD RGP9576

KEY

1 2 3 4 5 6 7 8 9 10 11 12

-UN-09APR03

PART NO.

RE52242 51M7042 RE504563 51M7045 R116115 R56462 R501436 19M7802 19M7913 RE506819 RE506818 RE504836 19M7835 R114358

PART NAME

QTY.

DRAIN PLUG O-RING FILTER HEAD O-RING FITTING O-RING ADAPTER FITTING SCREW SCREW TUBE TUBE OIL FILTER SCREW SPACER

700J CRAWLER DOZER (S.N. -139435)

PC9473

1 1 1 1 1 4 1 1 1 1 1 1 2 1

(04-AUG-05)

ENGINE SERIAL NO.

REMARKS

M16 X 1.5 13.300 X 2.200 MM (MARKED R502504) 18.644 X 3.531 MM

M92X2.5-6H THD M10 X35 (HS, HEAD MARKED 10.9)

0407-5

PN=129


0408-2 ENGINE

4

VENTILATING SYSTEM 0408 ENGINE VENTILATING SYSTEM TO6068TT056, PE6068TT056 AND PE6068TT060 TP55109

0408-2

-UN-16MAY97

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(04-AUG-05) PN=130


0408-3 ENGINE

4

VENTILATING SYSTEM 0408 ENGINE VENTILATING SYSTEM TO6068TT056, PE6068TT056 AND PE6068TT060

KEY

1 2 3

PART NO.

R120467 R72328 ........

PART NAME

QTY.

ELBOW FITTING O-RING BULK HOSE

700J CRAWLER DOZER (S.N. -139435)

PC9473

1 1 1

(04-AUG-05)

ENGINE SERIAL NO.

REMARKS

18.720 X 2.616 MM (0.737" X 0.103") (MAKE FROM TY24401, CUT TO LENGTH)

0408-3

PN=131


0409-2 ENGINE

4

CYLINDER HEAD AND VALVES 0409 CYLINDER HEAD AND VALVES TP53473

0409-2

-UN-07MAY97

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=132


0409-3 ENGINE

4

CYLINDER HEAD AND VALVES 0409 CYLINDER HEAD AND VALVES

KEY

1 2 3 4 5 6 7 8

9 10 11 12 13 14 15

PART NO.

R85363 R91889 RE60005 R26125 R104592 T58477 R26906 CD16284 R98063 R98335 R85687 R93910 R43409 R90692 R98062 R116516 RE31617 RE57489 RE57836

PART NAME

QTY.

CAP SCREW RETAINER ROTATOR SPRING PIPE PLUG FITTING O-RING PLUG VALVE SEAT INSERT VALVE SEAT INSERT VALVE SEAT INSERT VALVE SEAT INSERT PLUG EXHAUST VALVE INTAKE VALVE ENGINE CYLINDER HEAD GASKET SEAL CYLINDER HEAD PIPE PLUG

26 24 12 12 1 1 1 1 6 6 6 6 3 6 6 1 12 1 1

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05)

ENGINE SERIAL NO.

REMARKS

STANDARD SIZE INTAKE VALVE OVERSIZE INTAKE VALVE STANDARD SIZE EXHAUST VALVE OVERSIZE EXHAUST VALVE STANDARD STANDARD (MARKED R121608)

0409-3

PN=133


0409-4 ENGINE

4

CYLINDER HEAD AND VALVES 0409 LIFT STRAPS RGP7560

KEY

1 2 3

-UN-26JUN01

PART NO.

........ R502329 19M7788

0409-4

PART NAME

STRAP STRAP SCREW

QTY.

1 1 2

ENGINE SERIAL NO.

REMARKS

( R502175 NOT FOR SERVICE) (FRONT) (REAR) M12 X 25

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=134


0410-1 ENGINE

4

EXHAUST MANIFOLD 0410 EXHAUST MANIFOLD TP53379

KEY

1 2 3

-UN-15JAN97

PART NO.

R132262 R521439 19M7810

PART NAME

QTY.

EXHAUST MANIFOLD GASKET SCREW

700J CRAWLER DOZER (S.N. -139435)

PC9473

1 6 12

(03-FEB-05)

ENGINE SERIAL NO.

REMARKS

M10 X 80

0410-1

PN=135


0413-2 ENGINE

4

FUEL INJECTION SYSTEM 0413 FUEL INJECTION SYSTEM RGP10925

0413-2

-UN-27JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=136


0413-3 ENGINE

4

FUEL INJECTION SYSTEM 0413 FUEL INJECTION SYSTEM

KEY

1 2 3 4 5 6 7 8 9 10 11 12 13

14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

..

PART NO.

RE515233 19M7923 RE19797 RE515232 RE515231 RE515230 19M8560 RE20901 19M7923 RE19800 RE515229 RE515228 RE518089 RE521822 RE521823 RE521824 RE521825 RE522109 SE501237 14M7298 R116386 R502076 R505472 R132874 R91360 RE508716 R79604 R79605 R71963 RE68748 AR85519 R123593 R92352 RE507766 SE500831 SE501103 RE531116 R500390

PART NAME

QTY.

FUEL LINE CAP SCREW CLAMP FUEL LINE FUEL LINE FUEL LINE CAP SCREW CLAMP CAP SCREW CLAMP FUEL LINE FUEL LINE FUEL INJECTION PUMP KIT KIT KIT KIT KIT FUEL INJECTION PUMP FLANGE NUT STUD O-RING GEAR WASHER NUT CLAMP TUBE NUT WASHER TEE FITTING TUBE PLUG TUBE NUT PACKING INJECTION NOZZLE INJECTION NOZZLE NOZZLE KIT WASHER

1 4 4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3 3 1 1 1 1 6 1 1 1 4 2 2 1 6 1 AR 1 AR

SERIAL NO.

REMARKS

NO. 6 M6 X 12 NO. 5 NO. 4 NO. 3 M6 X 12 M6 X 12 NO. 2 NO. 1 (A) (STANADYNE DE10) (TEMPERATURE SENSOR) (PRESSURE REGULATOR) (TIMING PIN HOLE) (TRANSPUMP SCREW & VENT WIRE) (SOLENOID CONNECTOR) (REMANUFACTURED FOR RE518089) M8

M14 NSEP NSEP (INCLUDES (2) R123593 AND (2) R51936)

(ALSO ORDER (6) R500390) (REMANUFACTURED FOR RE507766) (PKG OF 6) (REMANUFACTURED FOR RE507766) (PKG OF 1) (INJECTION NOZZLE SEAL)

(A) SEE YOUR AUTHORIZED PUMP REPAIR STATION FOR INTERNAL PARTS (B) THIS PART MUST BE ORDERED WITH ENGINE SERIAL NUMBER

700J CRAWLER DOZER (S.N. -139435)

PC9473

(15-DEC-06)

0413-3

PN=137


0413-4 ENGINE

4

FUEL INJECTION SYSTEM 0413 MEMORANDA

0413-4

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=138


0414-1 ENGINE

4

INTAKE MANIFOLD 0414 AIR INTAKE SYSTEM RGP8571

KEY

1 2 3 4 5 6 7 8 9 10 11

-UN-20FEB02

PART NO.

19M8292 RE515393 R81275 R501472 R81275 51M7039 RE60071 51M7041 RE46684 R110531 R56551

PART NAME

QTY.

SCREW TUBE GASKET SPACER GASKET O-RING FITTING O-RING FITTING PLUG CLAMP HOSE

700J CRAWLER DOZER (S.N. -139435)

2 1 1 1 1 1 1 1 NA 2 1

PC9473

(04-AUG-05)

ENGINE SERIAL NO.

REMARKS

M10 X 50

8.100 X 1.600 MM 11.300 X 2.200 MM M14 X 1.5

0414-1

PN=139


0416-2 ENGINE

4

TURBOCHARGER 0416 TURBOCHARGER AND OIL LINES RGP6264

KEY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

-UN-29JAN02

PART NO.

19M8162 RE508719 M87733 R63548 14M7296 R123572 RE503208 T77613 38H5035 51M7042 19M7866 RE54885 RE65978 R120013 RE59438 R123570

0416-2

PART NAME

SCREW TURBOCHARGER ADAPTER FITTING O-RING FLANGE NUT GASKET HYDRAULIC HOSE O-RING ELBOW FITTING O-RING SCREW HOSE FITTING CLAMP HOSE OIL LINE GASKET

QTY.

4 1 1 1 4 1 1 1 1 2 2 1 2 AR 1 1

ENGINE SERIAL NO.

REMARKS

M10 X 40 (REMANUFACTURED) (BORG-WARNER) M10

M8 X 20

700J CRAWLER DOZER (S.N. -139435)

PC9473

(04-AUG-05) PN=140


0417-1 ENGINE

4

WATER PUMP 0417 WATER PUMP PULLEY AND INLET TP49462

KEY

1 2 3 4 5 6

-UN-05SEP96

PART NO.

R115250 19M7774 19M7867 19M7802 R121635 R89944

PART NAME

QTY.

PULLEY SCREW SCREW SCREW ELBOW FITTING O-RING

700J CRAWLER DOZER (S.N. -139435)

PC9473

1 3 1 1 1 1

(03-FEB-05)

ENGINE SERIAL NO.

REMARKS

OD 94MM M6 X 12 M8 X 25 M8 X 65 50.394 X 3.531 MM (1-63/64" X 0.139")

0417-1

PN=141


0418-2 ENGINE

4

THERMOSTATS, HOUSINGS AND WATER PIPING 0418 THERMOSTAT AND COVER TP53344

0418-2

-UN-07NOV96

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(04-AUG-05) PN=142


0418-3 ENGINE

4

THERMOSTATS, HOUSINGS AND WATER PIPING 0418 THERMOSTAT AND COVER

KEY

1 2 3 4 5 6 7 8 9 10 11

PART NO.

R131016 19M8292 R123323 RE46684 19M7786 19M7788 RE522076 R123226 R501144 R502814 R123324

PART NAME

QTY.

COVER SCREW CLAMP FITTING PLUG SCREW SCREW THERMOSTAT GASKET TUBE GASKET CLAMP

700J CRAWLER DOZER (S.N. -139435)

1 1 1 AR 1 1 1 1 1 1 1

PC9473

(04-AUG-05)

ENGINE SERIAL NO.

REMARKS

M10 X 50 M14 X 1.5, (INCLUDES 51M7041) M10 X 30 M12 X 25 (175 F)

0418-3

PN=143


0419-2 ENGINE

4

OIL COOLER 0419 OIL COOLER, HOUSING AND ADAPTER RGP8849

0419-2

-UN-08JUL02

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=144


0419-3 ENGINE

4

OIL COOLER 0419 OIL COOLER, HOUSING AND ADAPTER

KEY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

PART NO.

RE67231 RE56690 R123501 T122075 R123471 RE46685 RE46686 R501428 R504734 R502811 RE67238 19M7802 19M7970 51M7040 51M7043

PART NAME

QTY.

SCREW OIL COOLER GASKET O-RING HOUSING FITTING PLUG FITTING PLUG GASKET O-RING ADAPTER FITTING SCREW SCREW SCREW O-RING O-RING

700J CRAWLER DOZER (S.N. -139435)

PC9473

6 1 1 2 1 1 1 1 1 1 1 2 2 1 1

(03-FEB-05)

ENGINE SERIAL NO.

REMARKS

M6 X 16 (WITH PRE-APPLIED SEALANT) (7 PLATE) 1.174" X 0.103" (M12 X 1.5) 1.484" X 0.139" M8 X 20, (WITH PRE-APPLIED SEALANT) M8 X 65 M8 X 100 9.300 X 2.200 MM 15.300 X 2.200 MM

0419-3

PN=145


0420-2 ENGINE

4

FUEL FILTER 0420 PRIMARY FUEL FILTER RGP10924

0420-2

-UN-27JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=146


0420-3 ENGINE

4

FUEL FILTER 0420 PRIMARY FUEL FILTER

KEY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

PART NO.

19M7785 ........ R113562 R113563 R113565 RE526319 RE509036 RE51650 57M7256 RE519696 F431875 RE516512 RE526282 RE508847 RE51649 RE60854 R460R RE516553 RE515404 R501195

PART NAME

QTY.

SCREW FILTER HEAD O-RING DRAIN PLUG O-RING FILTER ELEMENT FUEL FILTER SEDIMENT BOWL ELECTRICAL CONNECTOR ASSY WIRING HARNESS NUT O-RING KIT FUEL FILTER FILTER HEAD SEAL KIT DRAIN VALVE O-RING SEAL KIT KIT BRACKET

700J CRAWLER DOZER (S.N. -139435)

PC9473

(15-DEC-06)

4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

ENGINE SERIAL NO.

REMARKS

M10 X 25 (ORDER RE508847)

-115990 115991-

4", (ALSO ORDER R113565) 6" (ALSO ORDER 57M7258, 57M7289 AND (2) R104919) WATER IN FUEL O-RING (PKG 10) ASSY KIT, (MARKED R504948) MECHANICAL COMPONENTS DRAIN VALVE 26.568 X 3.531 MM (1.046" X 0.139") SEAL

0420-3

PN=147


0420-4 ENGINE

4

FUEL FILTER 0420 FINAL FUEL FILTER RGP10927

0420-4

-UN-27JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=148


0420-5 ENGINE

4

FUEL FILTER 0420 FINAL FUEL FILTER

KEY

1 2 3

PART NO.

PART NAME

QTY.

4

RE509794 RE516553 RE509031 RE509032 RE51649

FILTER HEAD SEAL KIT FILTER ELEMENT FILTER ELEMENT SEAL KIT

1 1 1 1 1

5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

RE526834 RE60854 R505601 F431875 ........ RE516512 ........ ........ 19M8328 24M7096 R113563 R113562 R113565 ........ ........ ........ ........ ........ ........ 19M7784 RE504134

SEAL KIT DRAIN VALVE BRACKET NUT RETAINER O-RING KIT RETAINER FILTER HEAD SCREW WASHER DRAIN PLUG O-RING O-RING RETAINER O-RING GASKET DRAIN PLUG SCREW O-RING SCREW KIT

1 1 1 1 1 1 1 1 2 2 1 1 1 1 1 1 1 1 1 2 1

700J CRAWLER DOZER (S.N. -139435)

PC9473

(15-DEC-06)

ENGINE SERIAL NO.

-115990 115991-

REMARKS

FILTER HEAD (INCLUDES PARTS MARKED (A)) SEAL (INCLUDES PARTS MARKED (D)) 4", (INCLUDES RE60854) (2 MICRON FUEL FILTER) 6", (2 MICRON FUEL FILTER) MECHANICAL COMPONENTS (INCLUDES PARTS MARKED (B)) MECHANICAL COMPONENTS DRAIN VALVE (INCLUDES PARTS MARKED (C)) (A) (B) (A) (B) (D) O-RING (PKG 10) (A) (B) (ORDER RE509794) M10 X 25 10.500 X 18 X 1.600 MM (A) (B) (C) (A) (C) (D) (A) (D) (A) (B) (C) (D) (C) (D) (C) (D) M10 X 20 FUEL HEATER (24-VOLT)

0420-5

PN=149


0420-6 ENGINE

4

FUEL FILTER 0420 FUEL FILTER LINES RGP10921

0420-6

-UN-28JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=150


0420-7 ENGINE

4

FUEL FILTER 0420 FUEL FILTER LINES

KEY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

PART NO.

RE520909 RE507598 R123594 R74012 R123593 R51936 RE515360 RE521519 RE46686 51M7040 RE60029 ........ AR85519 T14050 19M7784 19M7865 R502287 14M7298 R504730 19M7783 R136082 19M7752

PART NAME

QTY.

FUEL LINE FUEL LINE TUBE NUT SEALING WASHER TUBE NUT SEALING WASHER FUEL LINE FUEL LINE FITTING PLUG O-RING ADAPTER FITTING ADAPTER FITTING PLUG CLAMP SCREW SCREW BRACKET FLANGE NUT BRACKET SCREW CLAMP CAP SCREW

700J CRAWLER DOZER (S.N. -139435)

PC9473

1 1 AR AR AR AR 1 1 5 4 3 NA 2 1 1 1 1 1 1 1 1 2

(03-FEB-05)

ENGINE SERIAL NO.

REMARKS

9/16"-24UNEF

M12 X 1.5 9.300 X 2.200 MM M12X1.5 X 9/16"-24UNEF

M10 X 20 M8 X 16 M8 M10 X 16 M4 X 20

0420-7

PN=151


0420-8 ENGINE

4

FUEL FILTER 0420 MEMORANDA

0420-8

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=152


0421-1 ENGINE

4

FUEL TRANSFER PUMP 0421 FUEL TRANSFER PUMP RGP10660

KEY

1 2 3 4 5 6

-UN-30AUG04

PART NO.

RE66153 R123273 R500271 R500270 RE504233 R133405

PART NAME

QTY.

FUEL PUMP O-RING O-RING FITTING CAP SCREW PIN

700J CRAWLER DOZER (S.N. -139435)

1 1 2 2 2 1

PC9473

(04-AUG-05)

ENGINE SERIAL NO.

REMARKS

31.420 X 2.616 MM (1.237" X 0.103") 10.100 X 1.600 MM (0.398" X 0.063") M10X1 X 9/16"-24UNEF

0421-1

PN=153


0422-2 ENGINE

4

STARTING MOTOR AND FASTENINGS 0422 STARTING MOTOR (24-VOLT DENSO) RGP10916

0422-2

-UN-20JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=154


0422-3 ENGINE

4

STARTING MOTOR AND FASTENINGS 0422 STARTING MOTOR (24-VOLT DENSO)

KEY

PART NO.

PART NAME

QTY.

1 1 1 1 1 1 1 1 1 1 1

1 2 3 4 5 6 7 8 9 10 11

R135509 R135510 RE70678 RE70682 RE71256 ........ ........ R96703 T146102 RE70756 RE501150

SEAL O-RING SWITCH CLUTCH SCREW WITH WASHER STARTER MOTOR COVER TIE BAND LABEL KIT STARTER MOTOR KIT

12 13 14 15 ..

TY24443 SE501406 19M7786 ........ ........ ........ R136052

STARTER MOTOR STARTER MOTOR SCREW WASHER NUT STUD STUD

700J CRAWLER DOZER (S.N. -139435)

PC9473

1 1 3 NA NA NA 1

(15-DEC-06)

ENGINE SERIAL NO.

REMARKS

47.200 X 2.400 MM (1.858" X 0.094") M5 X .8, TERMINAL 50 24V TERMINAL 50 BYPASS START (ENGLISH) SOLENOID COVER 24V, (MARKED RE501060) (INCLUDES R136052, 14M7299 AND 24M7047) 24V, (REMANUFACTURED) (REMANUFACTURED FOR TY24443) M10 X 30

M12X1.75, TERMINAL G (NOT SHOWN)

0422-3

PN=155


0423-2 ENGINE

4

ALTERNATOR AND GENERATOR MOUNTING 0423 ALTERNATOR MOUNTING BRACKETS TP69523

-UN-06JUN00

THIS PARTS LISTING IS CONTINUED

0423-2

700J CRAWLER DOZER (S.N. -139435)

PC9473

(04-AUG-05) PN=156


0423-3 ENGINE

4

ALTERNATOR AND GENERATOR MOUNTING 0423 ALTERNATOR MOUNTING BRACKETS

KEY

1 2 3 4 5 6

PART NO.

R100377 R132166 19M7786 14M7296 R132167 19M7785

PART NAME

QTY.

BUSHING BRACKET SCREW FLANGE NUT STRAP SCREW

700J CRAWLER DOZER (S.N. -139435)

1 1 5 3 1 2

PC9473

(04-AUG-05)

ENGINE SERIAL NO.

REMARKS

M10 X 30 M10 M10 X 25

0423-3

PN=157


0423-4 ENGINE

4

ALTERNATOR AND GENERATOR MOUNTING 0423 MEMORANDA

0423-4

700J CRAWLER DOZER (S.N. -139435)

PC9473

(04-AUG-05) PN=158


0429-1 ENGINE

4

FAN DRIVE 0429 CRANKSHAFT PULLEY & DAMPER TP49364

KEY

1 2 3

-UN-24JAN96

PART NO.

R133295 RE59355 R121897

PART NAME

QTY.

PULLEY TORSIONAL DAMPER BOLT

700J CRAWLER DOZER (S.N. -139435)

PC9473

ENGINE SERIAL NO.

REMARKS

1 1 4

(04-AUG-05)

0429-1

PN=159


0429-2 ENGINE

4

FAN DRIVE 0429 FAN DRIVE HOUSING,PULLEY,DRIVE BELT AND BELT TENSIONER TP69525

0429-2

-UN-14JUN00

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(04-AUG-05) PN=160


0429-3 ENGINE

4

FAN DRIVE 0429 FAN DRIVE HOUSING,PULLEY,DRIVE BELT AND BELT TENSIONER

KEY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

PART NO.

........ E1343FN ........ ........ R128662 19M7784 19M7835 19M7801 RE70535 19M7811 R133978 RE503664 34M7061 R500322 R500384 R500385 R500320 RE505264 R502079 19M7808

PART NAME

QTY.

HOUSING SNAP RING SHAFT HUB PULLEY SCREW SCREW SCREW TIGHTENER SCREW SUPPORT BEARING HOUSING W/ BEARING SPRING PIN SPACER V-BELT V-BELT SPACER PULLEY SLEEVE SCREW

700J CRAWLER DOZER (S.N. -139435)

PC9473

(04-AUG-05)

1 1 1 1 1 4 4 2 1 1 1 1 1 1 1 1 1 1 1 1

ENGINE SERIAL NO.

REMARKS

(ORDER RE503664) (ORDER RE503664) M10 X 20 M10 X 35 M8 X 60 M10 X 90 (MARKED R502014) 8 X 20 MM (WITHOUT A/C) (WITH A/C) (WITH A/C) (WITH A/C) (WITH A/C) M10 X 65, (WITH A/C)

0429-3

PN=161


0429-4 ENGINE

4

FAN DRIVE 0429 MEMORANDA

0429-4

700J CRAWLER DOZER (S.N. -139435)

PC9473

(04-AUG-05) PN=162


0433-1 ENGINE

4

FLYWHEEL, HOUSING AND FASTENINGS 0433 FLYWHEEL TP80049

KEY

1 2 3

-UN-09DEC98

PART NO.

R135918 RE508966 R28811

PART NAME

QTY.

BOLT FLYWHEEL RING GEAR

700J CRAWLER DOZER (S.N. -139435)

6 1 1

PC9473

(03-FEB-05)

ENGINE SERIAL NO.

REMARKS

(MARKED R505142) Z= 129

0433-1

PN=163


0433-2 ENGINE

4

FLYWHEEL, HOUSING AND FASTENINGS 0433 FLYWHEEL HOUSING AND CRANKSHAFT REAR OIL SEAL RGP10909

KEY

1 2 3 4 5 6

-UN-18JAN05

PART NO.

R503452 R131769 R61467 RE44574 19M8306 R135918

0433-2

PART NAME

HOUSING PLUG O-RING SEAL SCREW BOLT

QTY.

1 1 1 1 1 1

ENGINE SERIAL NO.

REMARKS

M12 X 50

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=164


0452-1 ENGINE

4

GASKET REPLACEMENT KITS 0452 GASKET KIT - IN-CHASSIS OVERHAUL TP49294

KEY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

-UN-28SEP95

PART NO.

R123543 R521439 R502814 R123226 R123345 R123570 R123575 R116516 R501373 R81275 R123572 ........ R123354 R75892 R97185 R61871 RE526673

PART NAME

QTY.

GASKET GASKET GASKET GASKET GASKET GASKET O-RING ENGINE CYLINDER HEAD GASKET GASKET GASKET GASKET GASKET KIT GASKET O-RING O-RING O-RING KIT

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05)

1 6 1 2 1 1 6 1 1 1 1 1 1 1 1 1 1

ENGINE SERIAL NO.

REMARKS

NLA

0452-1

PN=165


0452-2 ENGINE

4

GASKET REPLACEMENT KITS 0452 OVERHAUL GASKET KIT TP58369

0452-2

-UN-08FEB99

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=166


0452-3 ENGINE

4

GASKET REPLACEMENT KITS 0452 OVERHAUL GASKET KIT

KEY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 ..

PART NO.

R123543 R521439 R502814 R123226 R123345 R123570 R123575 R116516 R501373 R81275 R123572 R123354 R501428 R75892 R97185 R61871 A4827R RE44574 RE516340 RE59810 R123273 R123417 R136516 R136515 R123501 R502864 R123525 R53108 R72328 R89944 R61105 T122075 R136495 R500374 RE526965 TY6304

PART NAME

QTY.

GASKET GASKET GASKET GASKET GASKET GASKET O-RING ENGINE CYLINDER HEAD GASKET GASKET GASKET GASKET GASKET GASKET O-RING O-RING O-RING WASHER SEAL KIT SEAL KIT O-RING GASKET GASKET GASKET GASKET GASKET GASKET GASKET O-RING O-RING O-RING O-RING GASKET GASKET GASKET KIT SEALANT

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05)

ENGINE SERIAL NO.

REMARKS

1 6 1 2 1 1 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 1 2 2 2 1 1 1

0452-3

PN=167


0505-2 ENGINE AUXILIARY SYSTEM 5

COLD WEATHER STARTING AIDS 0505 ENGINE STARTING AID T204613

0505-2

-UN-01DEC04

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(07-SEP-06) PN=168


0505-3 ENGINE AUXILIARY SYSTEM 5

COLD WEATHER STARTING AIDS 0505 ENGINE STARTING AID

KEY

1 2 4 6 7 8 9 13

PART NO.

AT170759 AT171539 AR21999 37M7059 ........ AT171162 ........ TY22462 AT183222

PART NAME

QTY.

SOLENOID CAP (HAT) HOSE CLAMP SCREW HOSE STARTING FLUID TUBE CLAMP NOZZLE

700J CRAWLER DOZER (S.N. -139435)

PC9473

1 1 1 4 1 1 1 1 1

(04-AUG-05)

SERIAL NO.

REMARKS

(ETHER VALVE CAP)(NOT ILLUSTRATED) M5 X 12 (MAKE FROM T78593, ELEVEN FT, CUT TO LENGTH) (CYLINDER) (MAKE FROM TY22566, TWO FEET, CUT TO LENGTH) (STARTING AID) (ENGINE AIR INTAKE)

0505-3

PN=169


0505-4 ENGINE AUXILIARY SYSTEM 5

COLD WEATHER STARTING AIDS 0505 ENGINE COOLANT HEATER T207756

0505-4

-UN-01FEB05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=170


0505-5 ENGINE AUXILIARY SYSTEM 5

COLD WEATHER STARTING AIDS 0505 ENGINE COOLANT HEATER

KEY

1 2 3 4 5 6

PART NO.

R54123 RE524676 R206883 AT73296 U13639 AT211191

PART NAME

QTY.

ADAPTER FITTING HEATING ELEMENT WASHER POWER CORD O-RING COOLANT HEATER

700J CRAWLER DOZER (S.N. -139435)

PC9473

1 1 1 1 1 1

(03-FEB-05)

SERIAL NO.

REMARKS

(ENGINE)

(EQUIPMENT FIELD)(INSTALLED IN ENGINE BLOCK)

0505-5

PN=171


0505-6 ENGINE AUXILIARY SYSTEM 5

COLD WEATHER STARTING AIDS 0505 START AID SWITCH T204619

0505-6

-UN-14JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=172


0505-7 ENGINE AUXILIARY SYSTEM 5

COLD WEATHER STARTING AIDS 0505 START AID SWITCH

KEY

1 2

PART NO.

AT309946 M115279

PART NAME

QTY.

TOGGLE/ROCKER SWITCH PLUG

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05)

1 1

SERIAL NO.

REMARKS

(START AID) (EURO STYLE)

0505-7

PN=173


0505-8 ENGINE AUXILIARY SYSTEM 5

COLD WEATHER STARTING AIDS 0505 FUEL FIRED COOLANT HEATER T199845

0505-8

-UN-13MAY04

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=174


0505-9 ENGINE AUXILIARY SYSTEM 5

COLD WEATHER STARTING AIDS 0505 FUEL FIRED COOLANT HEATER

KEY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 41 42 43 44 45 46 47

PART NO.

14M7272 14M7273 15H219 19M7167 19M7361 19M7560 19M7646 19M7981 24M7036 24M7054 24M7096 24M7180 24M7427 51M7043 AR21837 TY22462 AT221440 AT221560 AT221605 AT221990 AT222214 14M7302 AT222696 14M7302 AT222697 AT223099 AT223103 AT224094 AT225605 ........ R123616 T177523 T177524 T177525 T177575 T177580 T178871 T178901 T179306 T179467 T179483 T179671 T26955 T41770 T62323 U13639 ........

PART NAME

QTY.

NUT NUT ELBOW FITTING CAP SCREW CAP SCREW CAP SCREW CAP SCREW CAP SCREW WASHER WASHER WASHER WASHER WASHER O-RING CLAMP CLAMP FITTING TEE FITTING CLAMP DIGITAL DISPLAY BRACKET WELD NUT BRACKET WELD NUT COOLANT HEATER FUEL PUMP WIRING HARNESS CLAMP LINE BULK HOSE PLUG BULK HOSE BULK HOSE BULK HOSE EXHAUST CAP HOSE HOSE BRACKET CLAMP HOSE FITTING STRAP CLAMP ISOLATOR WASHER O-RING KIT

700J CRAWLER DOZER (S.N. -139435)

PC9473

2 2 1 1 2 5 1 2 4 7 1 2 1 1 5 2 1 1 1 1 1 1 1 1 1 1 1 4 1 1 1 1 1 1 1 2 1 1 2 1 1 1 1 2 4 1 1

(13-APR-07)

SERIAL NO.

REMARKS

M6 M8 (45 DEGREE) M10 X 25 M12 X 50 M6 X 16 M14 X 25 M8 X 55 9 X 16 X 1.600 MM 6.400 X 12 X 1.600 MM 10.500 X 18 X 1.600 MM 13 X 37 X 3 MM 15 X 24 X 2.500 MM 15.300 X 2.200 MM (HOSE) (HOSE) (INCLUDES 19M7981, 14M7273 AND (2) 24M7238) (TIMER) M12, (NOT ILLUSTRATED) (HEATER SUPPORT) M12, (NOT ILLUSTRATED) (24V DIESEL FUELED COOLANT HEATER) (COOLANT HEATER) (MAKE FROM T78497) (CUT TO LENGTH) (COOLANT HEATER WATER IN) (COOLANT HEATER AIR IN) (COOLANT HEATER EXHAUST OUT) (FUEL LINE ADAPTING HOSE) (PUMP TO HEATER FUEL LINE) (FUEL LINE) (MOUNTING) 17/32" X 2.010" X 1/8" ( AT307626 NLA) (WHOLEGOODS) (FUEL FIRED COOLANT HEATER)

0505-9

PN=175


0511-2 ENGINE AUXILIARY SYSTEM 5

RADIATOR AND FAN SHROUD 0511 COOLING SYSTEM T211325

0511-2

-UN-19JUL05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(15-DEC-06) PN=176


0511-3 ENGINE AUXILIARY SYSTEM 5

RADIATOR AND FAN SHROUD 0511 COOLING SYSTEM

KEY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 28 29 30 31 32 33 34 35 36 37 38 39 40

PART NO.

14M7400 19M7402 19M7513 19M7550 19M7662 19M7875 19M7938 19M8011 19M8197 24H1718 24M7024 24M7207 24M7238 24M7239 24M7240 24M7296 37M7060 AH89557 TY22470 AT169186 AT208549 AT210996 AT13740 AT173610 AT221693 AT222550 T175239 AT222652 AT186925 AT166459 AT223225 AT224731 AT211344 ........ R56101 T161296 19M7866 T174731 T174740 T178439 M84971

PART NAME

QTY.

LOCK NUT CAP SCREW CAP SCREW CAP SCREW CAP SCREW CAP SCREW CAP SCREW CAP SCREW CAP SCREW WASHER WASHER WASHER WASHER WASHER WASHER WASHER SCREW CLIP CLAMP ISOLATOR ISOLATOR RADIATOR DRAIN VALVE FILLER CAP BAR BRACKET BRACKET PLATE FILLER CAP TANK OIL COOLER SHROUD GUARD BULK HOSE CLIP SCREW SCREW RADIATOR HOSE RADIATOR HOSE WASHER NUT

700J CRAWLER DOZER (S.N. -139435)

PC9473

7 4 7 4 2 3 8 2 4 6 8 7 4 7 2 14 2 2 4 4 3 1 1 1 1 1 1 1 1 1 1 1 1 1 3 12 12 1 1 8 4

(04-AUG-05)

SERIAL NO.

REMARKS

M10 M10 X 25

-113558

-113558

-113558

M10 X 35 M10 X 30 M10 X 70 M10 X 20 M12 X 30 M10 X 85 13/32" X 1-5/8" X 0.134" 9 X 28 X 3 MM 8.400 X 24 X 2 MM 8.700 X 17 X 2 MM 10.700 X 21 X 2.500 MM 13 X 25 X 3 MM 10.500 X 30 X 2.500 MM M4 X 10

(SUB FOR AT221693) (INCLUDES BRACKET T175239 AND WELDMENT NUTS) (INCLUDED IN AT222550) (RADIATOR RECOVERY)(4 QUART) (RADIATOR FAN) (FURNISH TY22566 BULK MATERIAL,CUT TO LENGTH)

-113558 113559-

M8 X 20

113559-

(J-CLAMP NUT)

0511-3

PN=177


0511-4 ENGINE AUXILIARY SYSTEM 5

RADIATOR AND FAN SHROUD 0511 COOLING SYSTEM SAND SHIELD TP67564

0511-4

-UN-10NOV99

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=178


0511-5 ENGINE AUXILIARY SYSTEM 5

RADIATOR AND FAN SHROUD 0511 COOLING SYSTEM SAND SHIELD

KEY

1 2 3

PART NO.

........ AT220833 19M7867

PART NAME

QTY.

LOCK NUT SHIELD SCREW

700J CRAWLER DOZER (S.N. -139435)

4 2 4

PC9473

(04-AUG-05)

SERIAL NO.

REMARKS

(NOT USED) (SUB FOR 14M7426) M8 X 25

0511-5

PN=179


0512-2 ENGINE AUXILIARY SYSTEM 5

FAN 0512 FAN AND FAN BELT TP67568

0512-2

-UN-10NOV99

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=180


0512-3 ENGINE AUXILIARY SYSTEM 5

FAN 0512 FAN AND FAN BELT

KEY

1 2 3 4 5 6

PART NO.

R500384 R500385 R128662 R81876 AT211347 24M7239 19M8166

PART NAME

QTY.

V-BELT V-BELT PULLEY SPACER BLOWER FAN WASHER CAP SCREW

700J CRAWLER DOZER (S.N. -139435)

1 1 1 1 1 4 4

PC9473

(03-FEB-05)

SERIAL NO.

REMARKS

(POLY RIBBED) (WITHOUT AIR CONDITIONING) (WITH AIR CONDITIONING) (FAN PULLEY) 10.700 X 21 X 2.500 MM M10 X 110

0512-3

PN=181


0521-2 ENGINE AUXILIARY SYSTEM 5

AIR CLEANER AND PIPING 0521 AIR CLEANER T209046

0521-2

-UN-04MAR05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(04-AUG-05) PN=182


0521-3 ENGINE AUXILIARY SYSTEM 5

AIR CLEANER AND PIPING 0521 AIR CLEANER

KEY

PART NO.

PART NAME

QTY.

1 2 3 4 5 6 7 8 9 10

T179504 AT175357 AT222722 AT203470 24M7239 19M7938 AT50923 T179254 AT56657 AT178542 AR44361

SELF-OPERATING VALVE COVER FILTER ELEMENT FILTER ELEMENT WASHER CAP SCREW HOSE CLAMP HOSE HOSE CLAMP AIR RESTRICTION SENSOR FITTING

1 1 1 1 4 4 1 1 1 1 1

11 12 13 14 15 16

TY22489 AT175358 AT206842 AT220921 AT209926 T163113

HOSE CLAMP CAP CLAMP AIR CLEANER LATCH O-RING

1 1 1 1 3 1

700J CRAWLER DOZER (S.N. -139435)

PC9473

(04-AUG-05)

SERIAL NO.

REMARKS

(CLEAN OUT VALVE) (AIR CLEANER) (PRIMARY ELEMENT) (SECONDARY FILTER ELEMENT) 10.700 X 21 X 2.500 MM M10 X 20

(VACUUM SWITCH SENSOR) (NOT ILLUSTRATED) (VACUUM SWITCH SENSOR SPECIAL CONNECTOR) (RAINCAP WITH CLAMP) (MOUNTING BAND, AIR CLEANER)

0521-3

PN=183


0531-2 ENGINE AUXILIARY SYSTEM 5

MUFFLER AND EXHAUST PIPE 0531 MUFFLER TP52083

0531-2

-UN-08JAN99

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=184


0531-3 ENGINE AUXILIARY SYSTEM 5

MUFFLER AND EXHAUST PIPE 0531 MUFFLER

KEY

1 2 3 4

PART NO.

AT220452 RE40048 24M7239 19M8637

PART NAME

QTY.

MUFFLER CLAMP WASHER CAP SCREW

700J CRAWLER DOZER (S.N. -139435)

1 1 3 3

PC9473

(03-FEB-05)

SERIAL NO.

REMARKS

10.700 X 21 X 2.500 MM M10 X 40

0531-3

PN=185


0540-2 ENGINE AUXILIARY SYSTEM 5

ENGINE MOUNTING 0540 POWER TRAIN MOUNTING T204685

0540-2

-UN-01DEC04

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=186


0540-3 ENGINE AUXILIARY SYSTEM 5

ENGINE MOUNTING 0540 POWER TRAIN MOUNTING

KEY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

PART NO.

AT226562 AT340467 24M7240 19M7403 T29342 19H2993 AT223527 T180150 19H2702 T196319 19H3579 24M7239 19M7402 T177614 19M7493 14M7275 AT222916 14H1044

PART NAME

QTY.

MOUNTING PARTS MOUNTING PARTS WASHER CAP SCREW WASHER CAP SCREW ISOLATOR WASHER CAP SCREW COVER CAP SCREW WASHER CAP SCREW BRACKET CAP SCREW NUT PLATE NUT

700J CRAWLER DOZER (S.N. -139435)

PC9473

1 1 28 6 8 2 4 8 4 1 4 12 12 1 12 4 4 4

(13-APR-07)

SERIAL NO.

REMARKS

(RIGHT RAIL ASSEMBLY) (LEFT RAIL ASSEMBLY) (SUB FOR AT226561) 13 X 25 X 3 MM M12 X 35, (USE WITH T29342 WASHER) (USE WITH 19M7403 CAPSCREW) 1/2" X 1-1/2" (RUBBER ISOLATOR) 22.225 X 127 MM (FLYWHEEL) 1/2" X 1-3/8" 10.700 X 21 X 2.500 MM M10 X 25 M12 X 40 M12 (RETAINER PLATE AND NUT ASSEMBLY) 7/8"

0540-3

PN=187


0563-2 ENGINE AUXILIARY SYSTEM 5

FUEL LINES AND FITTINGS 0563 FUEL LINES T204793

0563-2

-UN-06JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=188


0563-3 ENGINE AUXILIARY SYSTEM 5

FUEL LINES AND FITTINGS 0563 FUEL LINES

KEY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 19 20 21 22 23 26 27 28 29 30 31 32 33 34

PART NO.

PART NAME

QTY.

R26375 AM118213 T77613 AT222555 DP36297 19M7938 24M7239 T29969 T203194 DP40226 R42009 T151959 24M7238 14M7273 AT228841 19M7513 TY22462 ........

O-RING HAND OPERATED VALVE O-RING HYDRAULIC HOSE - FABRICATE HOSE CAP SCREW WASHER CLAMP FUEL LINE FUEL LINE CLAMP ANGLE WASHER NUT FUEL LINE CAP SCREW CLAMP HOSE

1 1 3 1 1 1 2 1 1 1 2 1 2 1 1 1 1 1

TY22464 RE46686 51M7040 14M7274 24M7085 38H5008 T77613 AT210158 DP36115 R28782 38H1003 T77814 AT210156 DP36113 H82308 AH106982

CLAMP FITTING PLUG O-RING NUT WASHER ADAPTER FITTING O-RING HYDRAULIC HOSE - FABRICATE HOSE O-RING ELBOW FITTING O-RING HOSE HOSE ADAPTER FITTING SCREEN

1 2 4 2 2 2 1 1 1 1 1 1 1 1 1 1

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05)

SERIAL NO.

REMARKS

16.358 X 2.210 MM (FUEL SUPPLY TANK) (ALSO ORDER AH106982) 0.364" X 0.070" (FUEL SUPPLY TANK TO FILTER) (CONVENIENCE ASSEMBLY) (FIRE RESISTANT) M10 X 20 10.700 X 21 X 2.500 MM (LEAK-OFF) (FUEL TANK) (CONVENIENCE ASSEMBLY) (FIRE RESISTANT) 8.700 X 17 X 2 MM M8 (TRANSFER PUMP INLET) M8 X 30 (HOSE AT FUEL FILTER) (DRAIN) (MAKE FROM T119816, CUT TO LENGTH 2FT.) (AT FUEL LEAK-OFF LINE) 9.300 X 2.200 MM M10 15 X 28 X 2.500 MM 0.364" X 0.070" (FUEL SUPPLY FILTER TO ENGINE) (CONVENIENCE ASSEMBLY) (FIRE RESISTANT) 0.351" X 0.072" (90 DEGREE)(FACE SEAL) 0.301" X 0.070" (FUEL RETURN HOSE) (CONVENIENCE ASSEMBLY) (FIRE RESISTANT) (STAND PIPE)

0563-3

PN=189


0564-2 ENGINE AUXILIARY SYSTEM 5

FUEL TANK 0564 FUEL TANK T204848

0564-2

-UN-19JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=190


0564-3 ENGINE AUXILIARY SYSTEM 5

FUEL TANK 0564 FUEL TANK

KEY

1 2 3 4 5 6 7 9 10 11 12

PART NO.

19M8078 AT308470 T214230 19M7409 AT13740 24M7241 ........ 19M7863 AT156445 T103461 T24652 AT220510 AT223769

PART NAME

QTY.

CAP SCREW FUEL SENDER GASKET CAP SCREW DRAIN VALVE WASHER PLATE SCREW FILLER CAP SEALING WASHER BALL FUEL TANK WIRING HARNESS

700J CRAWLER DOZER (S.N. -139435)

PC9473

5 1 1 4 1 4 1 2 1 1 1 1 1

(04-AUG-05)

SERIAL NO.

REMARKS

M4 X 16 (RUBBER) M16 X 50 (FUEL TANK) 17 X 34 X 4 MM (NOT AVAILABLE) (SUB FOR T178533) M6 X 25 (INCLUDES T103461 AND T24652)

(FUEL SENDER WIRING HARNESS)

0564-3

PN=191


0575-2 ENGINE AUXILIARY SYSTEM 5

AUTOMATIC CONTROL CIRCUITS 0575 ENGINE CONTROL UNIT T165815

KEY

1 2 3

-UN-04MAR03

PART NO.

19M7372 24M7138 RE532629

0575-2

PART NAME

QTY.

CAP SCREW WASHER ENGINE CONTROLLER

4 4 1

ENGINE SERIAL NO.

REMARKS

M5 X 16 5.300 X 15 X 1.200 MM (SUB FOR RE522529)

700J CRAWLER DOZER (S.N. -139435)

PC9473

(13-APR-07) PN=192


0578-1 ENGINE AUXILIARY SYSTEM 5 SENSORS RGP10889

KEY

1 2 3 4 5 6 7 8

-UN-16NOV04

PART NO.

RE61812 51M7041 RE52722 ........ 51M7044 ........ RE519144 R517471

PART NAME

QTY.

SENSOR 1 O-RING 2 COOLANT TEMPERATURE SENSOR 1 SENSOR NA O-RING 1 SENSOR NA SENSOR 1 WHEEL 1

700J CRAWLER DOZER (S.N. -139435)

PC9473

(13-APR-07)

ENGINE SERIAL NO.

REMARKS

M14 X 1.5, MANIFOLD AIR TEMPERATURE 11.300 X 2.200 MM M14 X 1.5, COOLANT TEMPERATURE 17.300 X 2.200 MM M20 X 1.5, CRANKSHAFT TIMING CRANKSHAFT TIMING

0578-1

PN=193


0578-2 ENGINE AUXILIARY SYSTEM 5 WATER IN FUEL SENSOR RGP10888

KEY

1 2

-UN-16NOV04

PART NO.

57M7256 RE519696

0578-2

PART NAME

ELECTRICAL CONNECTOR ASSY WIRING HARNESS

QTY.

1 1

ENGINE SERIAL NO.

REMARKS

(ALSO ORDER 57M7258, 57M7289 AND (2) R104919) WATER IN FUEL

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=194


1015-1 SERVICE BRAKES

10

CONTROLS LINKAGE 1015 MEMORANDA

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05)

1015-1

PN=195


1062-2 SERVICE BRAKES

10

SERVICE BRAKE VALVE 1062 BRAKE VALVE AND FITTINGS T212967

1062-2

-UN-04AUG05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(04-AUG-05) PN=196


1062-3 SERVICE BRAKES

10

SERVICE BRAKE VALVE 1062 BRAKE VALVE AND FITTINGS

KEY

1 2 3 4 5 6 7 8 9 10

11

PART NO.

19M8319 38H1024 R26375 T77857 38H1160 R26448 T77613 38H1161 AT228298 AT308006 AT303799 T204128 AT224873 R28782

PART NAME

QTY.

SCREW TEE FITTING O-RING O-RING ADAPTER FITTING O-RING O-RING ADAPTER FITTING TRANS OIL PRESSURE SENSOR VALVE VALVE SCREW SEAL KIT O-RING

700J CRAWLER DOZER (S.N. -139435)

PC9473

(04-AUG-05)

2 1 2 3 1 1 1 1 1 1 1 2 1 1

SERIAL NO.

REMARKS

M8 X 50 0.644" X 0.087" 0.489" X 0.070" 0.468" X 5/64" 0.364" X 0.070" (BRAKE VALVE ASSEMBLY) (BRAKE CARTRIDGE VALVE) M5 X 8 (VALVE)

1062-3

PN=197


1115-2 PARKING-EMERGENCY BRAKES

11

CONTROLS LINKAGE 1115 BRAKE PEDAL AND MOUNTING T215416

1115-2

-UN-05OCT05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(12-APR-06) PN=198


1115-3 PARKING-EMERGENCY BRAKES

11

CONTROLS LINKAGE 1115 BRAKE PEDAL AND MOUNTING

KEY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

PART NO.

T168219 T201520 T182632 34M7216 19M8576 14M7274 19M7662 19M7881 T210217 24M7239 24M7241 40M7068 AT162350 AT224606 T140608 T181668 T182625 U15980

PART NAME

QTY.

PEDAL SHAFT SUPPORT SPRING PIN SCREW NUT CAP SCREW SCREW EXTENSION SPRING WASHER WASHER SNAP RING NEEDLE BEARING KIT SPRING PLATE PIN FASTENER O-RING

700J CRAWLER DOZER (S.N. -139435)

PC9473

1 1 1 7 2 3 7 2 1 4 3 1 2 1 1 1 1 1

(12-APR-06)

SERIAL NO.

REMARKS

(DECELERATOR) (BRAKE PEDAL) (PEDAL) 6 X 35 MM M5 X 30 M10 M10 X 30 M8 X 20 (TORSION) 10.700 X 21 X 2.500 MM 17 X 34 X 4 MM (ROLLER) (ROTARY DECEL SENSOR) (STOP MOUNT) (BRAKE DETENT) (PACKING)

1115-3

PN=199


1115-4 PARKING-EMERGENCY BRAKES

11

CONTROLS LINKAGE 1115 PARK BRAKE LOCK LEVER T204936

1115-4

-UN-21JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=200


1115-5 PARKING-EMERGENCY BRAKES

11

CONTROLS LINKAGE 1115 PARK BRAKE LOCK LEVER

KEY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

PART NO.

11M7093 14H785 14M7166 19M7784 19M9560 24H1288 24M7054 24M7085 24M7095 28H1511 AT320978 T35986 AT306056 AT307772 19H3364 19M9067 M48238 M84247 R105812 R44313 R57438 T11234 T119915 T119916 T153420 T204487

PART NAME

QTY.

COTTER PIN NUT LOCK NUT SCREW SCREW WASHER WASHER WASHER WASHER WASHER CONTROL LEVER PIN FASTENER SWITCH BRACKET CAP SCREW CAP SCREW SPRING WASHER KNOB WASHER COMPRESSION SPRING SPRING LOCK NUT PIN FASTENER PIN FASTENER PLATE PLATE

1 1 1 2 2 1 2 1 1 1 1 1 1 1 1 1 5 1 2 1 1 1 1 1 2 1

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05)

SERIAL NO.

REMARKS

1.600 X 20 MM 5/16" M8 M10 X 20 M6 X 10 9/32" X 1" X 1/16" 6.400 X 12 X 1.600 MM 15 X 28 X 2.500 MM 8.400 X 15 X 1.600 MM 0.364" X 0.540" X 1/4" (PARK LOCK LEVER) 1/4" X 29/32" (CPI) 3/8" X 2" M8 X 50 0.382" X 3/4" X 0.032" 0.410" X 2" X 0.060" 9.525 MM 18 X 66 MM, (HEADED) (SPRING GUIDE) (HAND SPEED) (PLASTIC SLIDER)

1115-5

PN=201


1322-2 MISCELLANEOUS VEHICLE

13

DECALS AND TRADEMARKS 1322 DECALS AND LABELS (ENGLISH) T206520

1322-2

-UN-06JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=202


1322-3 MISCELLANEOUS VEHICLE

13

DECALS AND TRADEMARKS 1322 DECALS AND LABELS (ENGLISH)

KEY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 16 17 18 19 21 22 23 24 25 26

PART NO.

JD5764 JD5822 JD5920 T230113 T207189 T207191 T210843 T211727 T211729 T201702 T211532 AT306587 T146097 T151711 T157172 T177890 T178472 T213861 T209860 T210774 T180755 T211336 T211337 T211338

PART NAME

QTY.

LABEL LABEL REFLECTOR LABEL LABEL LABEL LABEL LABEL LABEL LABEL LABEL LABEL LABEL LABEL LABEL LABEL LABEL LABEL LABEL LABEL LABEL LABEL LABEL LABEL

700J CRAWLER DOZER (S.N. -139435)

1 2 2 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

PC9473

(13-APR-07)

SERIAL NO.

REMARKS

(LEAPING DEER) (TRADEMARK, LEAPING DEER) (RED) (TRACK SAG) (SUB FOR T146182) (TRANSMISSION RESERVOIR) (HYDRAULIC RESERVOIR) (TIE DOWN) (700J) (DEERE) (PERIODIC MAINTENANCE CHART) (FUSE BLOCK, CAB) (REVERSE SPEED) (SEAT BELT WARNING) (PARK LOCK) (KEY START) (6-FUNCTION BLADE) (SEATBASE TILT PROCEDURE) (CAUTION AND START) (WARM UP-ENGINE SPEED) (ROPS) (HEATER AND FAN CONTROL) (XLT) (LGP) (LT)

1322-3

PN=203


1322-4 MISCELLANEOUS VEHICLE

13

DECALS AND TRADEMARKS 1322 LABEL AND DECALS (FRENCH AND SPANISH) T207995

1322-4

-UN-21FEB05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(04-AUG-05) PN=204


1322-5 MISCELLANEOUS VEHICLE

13

DECALS AND TRADEMARKS 1322 LABEL AND DECALS (FRENCH AND SPANISH)

KEY

PART NO.

PART NAME

QTY.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

T146098 T146106 T63225 T127575 T211381 T213866 T201706 T177196 T177198 T146099 T63224 T114681 T211382 T213867 T201712 T177197 T177199 T146104 AT315786

SAFETY SIGN SAFETY SIGN LABEL LABEL LABEL LABEL LABEL LABEL LABEL SAFETY SIGN LABEL LABEL LABEL LABEL LABEL LABEL LABEL SAFETY SIGN LABEL KIT

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

20

AT315789

LABEL KIT

1

21 22 23 24 25 26 27 28

T178473 T178474 T230132 T158589 T230131 T158588 T211391 T211392

LABEL LABEL LABEL LABEL LABEL LABEL LABEL LABEL

1 1 1 1 1 1 1 1

700J CRAWLER DOZER (S.N. -139435)

PC9473

(13-APR-07)

SERIAL NO.

REMARKS

(SPANISH SEAT BELT WARNING LABEL) (SPANISH BYPASS START LABEL) (SPANISH DISCONNECT LABEL) (SPANISH DIESEL ONLY LABEL) (SPANISH ROPS LABEL) (SPANISH SAFETY START LABEL) (SPANISH PERIODIC SERVICE CHART) (SPANISH TRANSMISSION OIL LEVEL LABEL) (SPANISH HYDRAULIC OIL LEVEL LABEL) (FRENCH SEAT BELT WARNING LABEL) (FRENCH DISCONNECT LABEL) (FRENCH DIESEL ONLY LABEL) (FRENCH ROPS LABEL) (FRENCH SAFETY START LABEL) (FRENCH PERIODIC SERVICE CHART) (FRENCH TRANSMISSION OIL LEVEL LABEL) (FRENCH HYDRAULIC OIL LEVEL LABEL) (FRENCH BYPASS START LABEL) (SPANISH DECAL KIT) IMPORTANT: MUST ALSO ORDER TRANSLATED OPERATOR’S MANUAL THROUGH YOUR AUTHORIZE DEALER. (FRENCH DECAL KIT) IMPORTANT: MUST ALSO ORDER TRANSLATED OPERATOR’S MANUAL THROUGH YOUR AUTHORIZE DEALER. (FRENCH SEAT BASE TILT PROCEDURE LABEL) (SPANISH SEAT BASE TILT PROCEDURE LABEL) (SPANISH TRACK SAG LABEL) (SUB FOR T146184) (SPANISH WELDING LABEL) (FRENCH TRACK SAG LABEL) (SUB FOR T146183) (FRENCH WELDING LABEL) (SPANISH FUSE BLOCK LABEL) (FRENCH FUSE BLOCK LABEL)

1322-5

PN=205


1322-6 MISCELLANEOUS VEHICLE

13

DECALS AND TRADEMARKS 1322 MEMORANDA

1322-6

700J CRAWLER DOZER (S.N. -139435)

PC9473

(04-AUG-05) PN=206


1369-1 MISCELLANEOUS VEHICLE

13

GREASES ,OILS ,FUELS AND COOLANTS 1369 ENGINE COOLANT CONDITIONER RGP9624

KEY

1 2

-UN-26JUN03

PART NO.

TY16004 TY16005

PART NAME

QTY.

ENGINE COOLANT CONDITIONER ENGINE COOLANT CONDITIONER

700J CRAWLER DOZER (S.N. -139435)

PC9473

(04-AUG-05)

1 1

ENGINE SERIAL NO.

REMARKS

16 OZ (473 ML) 1/2 GAL (1.89 L)

1369-1

PN=207


1511-2 EQUIPMENT ATTACHING

15

DRAWBAR 1511 STANDARD DRAWBAR TP67571

1511-2

-UN-10NOV99

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=208


1511-3 EQUIPMENT ATTACHING

15

DRAWBAR 1511 STANDARD DRAWBAR

KEY

1 2 3 4 5 6 7

PART NO.

AT167356 T152122 19M7572 14M7517 AT220049 19M8346 24M7243

PART NAME

QTY.

QUICK LOCK PIN RETAINER CAP SCREW LOCK NUT DRAWBAR CAP SCREW WASHER

700J CRAWLER DOZER (S.N. -139435)

PC9473

1 1 1 1 1 6 6

(03-FEB-05)

SERIAL NO.

REMARKS

(DRAWBAR) (HITCH PIN) M10 X 45 M10 M24 X 70 25.400 X 50 X 6 MM

1511-3

PN=209


1511-4 EQUIPMENT ATTACHING

15

DRAWBAR 1511 RETRIEVAL HITCH TX1013979

1511-4

-UN-25OCT06

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(05-MAR-07) PN=210


1511-5 EQUIPMENT ATTACHING

15

DRAWBAR 1511 RETRIEVAL HITCH

KEY

1 2 3 4 5 6 7

PART NO.

AT167356 T152122 19M7572 AT220051 14M7517 19M8346 24M7243

PART NAME

QTY.

QUICK LOCK PIN RETAINER CAP SCREW HITCH LOCK NUT CAP SCREW WASHER

700J CRAWLER DOZER (S.N. -139435)

PC9473

1 1 1 1 1 4 4

(05-MAR-07)

SERIAL NO.

REMARKS

(RETRIEVAL HITCH) (HITCH PIN) M10 X 45 (RETRIEVAL) M10 M24 X 70 25.400 X 50 X 6 MM

1511-5

PN=211


1511-6 EQUIPMENT ATTACHING

15

DRAWBAR 1511 DRAWBAR WITH 4000S WINCH TP67550

1511-6

-UN-18MAY99

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=212


1511-7 EQUIPMENT ATTACHING

15

DRAWBAR 1511 DRAWBAR WITH 4000S WINCH

KEY

1 2 3 4 5 6 7 8 9 10 11

PART NO.

14M7277 T83426 AT222830 19M8410 19M8147 T158619 AT222507 T152122 19M7572 14M7517 AT222829

PART NAME

QTY.

NUT WASHER DRAWBAR SCREW CAP SCREW BUSHING QUICK LOCK PIN RETAINER CAP SCREW LOCK NUT KIT

700J CRAWLER DOZER (S.N. -139435)

PC9473

4 12 1 4 4 4 1 1 1 1 1

(03-FEB-05)

SERIAL NO.

REMARKS

M20 20.900 X 35.400 X 7.095 MM, (HARDENED) (EXTENDED, WITH PIN RETAINER) M20 X 75 M20 X 90 (HOLLOW DOWEL) (HITCH) (HITCH PIN) M10 X 45 M10 (FIELD INSTALLED DRAWBAR WITH 4000S WINCH)

1511-7

PN=213


1512-2 EQUIPMENT ATTACHING

15

TOWBAR 1512 TOW HOOK TP67572

1512-2

-UN-10NOV99

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=214


1512-3 EQUIPMENT ATTACHING

15

TOWBAR 1512 TOW HOOK

KEY

1 2 3

PART NO.

AT220053 19M7597 24M7242

PART NAME

QTY.

HOOK CAP SCREW WASHER

700J CRAWLER DOZER (S.N. -139435)

1 4 4

PC9473

(03-FEB-05)

SERIAL NO.

REMARKS

(TOW HOOK) M20 X 50 21.400 X 42 X 5 MM

1512-3

PN=215


1671-2 VEHICLE ELECTRICAL SYSTEMS 16

BATTERIES, SUPPORT AND CABLES 1671 BATTERIES AND CABLES T205044

1671-2

-UN-03FEB05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=216


1671-3 VEHICLE ELECTRICAL SYSTEMS 16

BATTERIES, SUPPORT AND CABLES 1671 BATTERIES AND CABLES

KEY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

PART NO.

14M7020 24M7207 T173580 AT223636 T180231 T42199 AT41188 TY6128 AT222039 AT177870 T141123 T107114 AT210517 14M7273 24M7296 T161816 14M7299 AT47069 AT222041 T107115 19M7662 24M7239

PART NAME

QTY.

WING NUT WASHER COVER BATTERY CABLE BOOT LABEL SWITCH DRY CHARGED BATTERY BATTERY CABLE CABLE BOLT COVER PLATE NUT WASHER SPACER FLANGE NUT GROUND CABLE BATTERY CABLE COVER CAP SCREW WASHER

700J CRAWLER DOZER (S.N. -139435)

PC9473

(13-APR-07)

2 4 1 1 1 1 1 2 1 1 2 2 1 2 2 2 2 1 1 1 1 1

SERIAL NO.

REMARKS

M8 8.400 X 24 X 2 MM (BATTERY) (TERMINAL BOOT, 2 WAY) (DISCONNECT) (BATTERY DISCONNECT) (ALSO ORDER (2) TY15733) (BATTERY POSITIVE) (BATTERY NEGATIVE) (HOOK BOLT)(8MM) (RIGHT HAND TERMINAL) (BATTERY HOLDOWN) M8 10.500 X 30 X 2.500 MM 0.364" X 0.540" X 3/4" M12 (BATTERY GROUND STRAP) (BATTERY NEGATIVE TO SWITCH) (LEFT HAND TERMINAL) M10 X 30 10.700 X 21 X 2.500 MM

1671-3

PN=217


1672-2 VEHICLE ELECTRICAL SYSTEMS 16

ALTERNATOR 1672 ALTERNATOR T205046

1672-2

-UN-19JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=218


1672-3 VEHICLE ELECTRICAL SYSTEMS 16

ALTERNATOR 1672 ALTERNATOR

KEY

1 2 3 4 5 6

7 8 9

PART NO.

14M7517 19M7513 19M8166 24M7238 24M7239 TY26045 AT163156 H144095 SE501362 R48808 R501486 T158584

PART NAME

QTY.

LOCK NUT CAP SCREW CAP SCREW WASHER WASHER ALTERNATOR REGULATOR CAPACITOR ALTERNATOR WASHER PULLEY FAN

700J CRAWLER DOZER (S.N. -139435)

1 1 1 1 3 1 1 1 1 1 1 1

PC9473

(15-DEC-06)

SERIAL NO.

REMARKS

M10 M8 X 30 M10 X 110 8.700 X 17 X 2 MM 10.700 X 21 X 2.500 MM (REMANUFACTURED, 24V/55AMP/4500RPM) (NOT ILLUSTRATED) (NOT ILLUSTRATED) (REMANUFACTURED FOR TY26045) (SPECIAL) (ALTERNATOR)

1672-3

PN=219


1673-2 VEHICLE ELECTRICAL SYSTEMS 16

VEHICLE LIGHTING SYSTEM 1673 GRILLE MOUNTED AND REAR WORK LIGHTS TX1013688

1673-2

-UN-19OCT06

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(05-MAR-07) PN=220


1673-3 VEHICLE ELECTRICAL SYSTEMS 16

VEHICLE LIGHTING SYSTEM 1673 GRILLE MOUNTED AND REAR WORK LIGHTS

KEY

1 2 3 4

5 6 7

PART NO.

PART NAME

QTY.

19M7775 19M7863 T177833 T202551

SCREW SCREW RING HOUSING

4 2 3 3

R44302

TIE BAND

1

AT221450 AT222676 T208406 AT221845

BULB WIRING HARNESS GROMMET BRACKET

3 1 3 1

T71386

NUT

4

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05)

SERIAL NO.

REMARKS

M6 X 16 M6 X 25 (LAMP RETAINING) (LAMP) (CONTAINS SLOT FOR WIRE BAND R44302 TO CREATE STRAIN RELIEF FOR PIG TAIL) (NOT ILLUSTRATED) (TO GO THROUGH SLOT IN HOUSING TO CREATE STRAIN RELIEF FOR PIG TAIL) (ALSO ORDER T208406) (NOT ILLUSTRATED) (LIGHT WIRING HARNESS) (DEFLECTOR/GROMMET) (LAMP) (NOTE-PLEASE UTILIZE WIRE CLIPS TO RELIEVE STRAIN ON WIRING HARNESS) M6, (WELD NUT)

1673-3

PN=221


1673-4 VEHICLE ELECTRICAL SYSTEMS 16

VEHICLE LIGHTING SYSTEM 1673 ROPS HI-INTENSITY LIGHTS T205058

1673-4

-UN-24JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=222


1673-5 VEHICLE ELECTRICAL SYSTEMS 16

VEHICLE LIGHTING SYSTEM 1673 ROPS HI-INTENSITY LIGHTS

KEY

PART NO.

PART NAME

QTY.

1

AT311106

KIT

1

2 3 4 5 6 7 8 9 10 11 12 13

19M8543 24H1411 AT221351 14M7274 R41440 24M7028 19M7662 19M8425 24M7054 T175866 T208406 AT221450

CAP SCREW WASHER HOUSING NUT GROMMET WASHER CAP SCREW CAP SCREW WASHER PLATE GROMMET BULB

4 4 2 2 4 6 6 8 8 4 4 4

14 15 16 17 18 19

AT219952 14M7517 AT310970 AT222676 T102780 AT303862 M115279

PLATE LOCK NUT WIRING HARNESS WIRING HARNESS CIRCUIT BREAKER TOGGLE/ROCKER SWITCH PLUG

1 2 1 4 1 1 1

20 21 22 23 24 25 26 27 28 29 30

19M7402 T178024 37H116 19M8093 24M7239 H110232 T177261 AT219953 T208582 T208583 AT313668

CAP SCREW PLATE SCREW CAP SCREW WASHER WASHER BRACKET PLATE PLATE PLATE HOUSING

2 1 3 2 6 6 2 1 1 1 2

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05)

SERIAL NO.

REMARKS

(ROPS HI-INTENSITY LIGHTS)(OPTIONAL FIELD PACKAGE) M20 X 30 7/8" X 2" X 0.120" (WORK LIGHT) M10 (WIRING HARNESS) 10.500 X 20 X 2 MM M10 X 30 M6 X 16 6.400 X 12 X 1.600 MM (HIGH INTENSITY) (12V-50W) (ALSO ORDER T208406) (LIGHT BRACKET) (RIGHT) M10 (ROPS WORK LIGHTS) (LIGHT) (NOT ILLUSTRATED) (25AMP) (WORK LIGHT SWITCH) (ON-OFF) (NOT ILLUSTRATED) (USED WHEN LIGHT SWITCH IS NOT) M10 X 25 (LIGHT WIRING HARNESS GUARD) (USED TO FASTEN LIGHT WIRING HARNESS GUARD) M10 X 100 10.700 X 21 X 2.500 MM 10.310 X 22.600 X 1.500 MM (LIGHT BRACKET) (LEFT) (WORK LIGHT ASSEMBLY)

1673-5

PN=223


1673-6 VEHICLE ELECTRICAL SYSTEMS 16

VEHICLE LIGHTING SYSTEM 1673 CAB HI-INTENSITY LIGHTS T205067

1673-6

-UN-19JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=224


1673-7 VEHICLE ELECTRICAL SYSTEMS 16

VEHICLE LIGHTING SYSTEM 1673 CAB HI-INTENSITY LIGHTS

KEY

PART NO.

PART NAME

QTY.

1 2 3 4 5 6 7 8 9 10

14M7396 24M7239 H110232 T177261 19M8093 R41440 19M7867 14M7517 AT221351 AT221450

LOCK NUT WASHER WASHER BRACKET CAP SCREW GROMMET SCREW LOCK NUT HOUSING BULB

2 2 4 2 2 4 2 2 2 4

11 12 13 14 16 17 18 19 20 21 22 23 24

T208406 T175866 24M7054 19M8425 AT303862 19M8543 24H1411 AT219952 24M7238 24M7028 19M7662 R36235 AT311107

GROMMET PLATE WASHER CAP SCREW TOGGLE/ROCKER SWITCH CAP SCREW WASHER PLATE WASHER WASHER CAP SCREW GROMMET KIT

4 4 8 8 1 2 2 1 2 4 4 4 1

25 26 27 28

AT219953 AT222676 T102780 AT313668

PLATE WIRING HARNESS CIRCUIT BREAKER HOUSING

1 4 1 2

700J CRAWLER DOZER (S.N. -139435)

PC9473

(05-MAR-07)

SERIAL NO.

REMARKS

M8 10.700 X 21 X 2.500 MM 10.310 X 22.600 X 1.500 MM M10 X 100 (WIRING HARNESS) M8 X 25 M10 (WORK LIGHT) (HIGH INTENSITY) (12V-50W) (ALSO ORDER T208406) 6.400 X 12 X 1.600 MM M6 X 16 (WORK LIGHT SWITCH) (ON-OFF) M20 X 30 7/8" X 2" X 0.120" (LIGHT BRACKET) (RIGHT) 8.700 X 17 X 2 MM 10.500 X 20 X 2 MM M10 X 30 (WIRING HARNESS) (CAB HI-INTENSITY LIGHT)(OPTIONAL FIELD PACKAGE) (LIGHT BRACKET) (LEFT) (NOT ILLUSTRATED) (LIGHT WIRING) (25AMP) (WORK LIGHT ASSEMBLY)

1673-7

PN=225


1674-2 VEHICLE ELECTRICAL SYSTEMS 16

WIRING HARNESS AND SWITCHES 1674 TRANSMISSION WIRING HARNESS T205164

1674-2

-UN-14JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=226


1674-3 VEHICLE ELECTRICAL SYSTEMS 16

WIRING HARNESS AND SWITCHES 1674 TRANSMISSION WIRING HARNESS

KEY

1 2 3

PART NO.

AT307982 T164263 R44302

PART NAME

QTY.

WIRING HARNESS ISOLATOR TIE BAND

700J CRAWLER DOZER (S.N. -139435)

PC9473

1 1 AR

(04-AUG-05)

SERIAL NO.

REMARKS

(TRANSMISSION) (MOLDING)(USE 46.5 INCHES)

1674-3

PN=227


1674-4 VEHICLE ELECTRICAL SYSTEMS 16

WIRING HARNESS AND SWITCHES 1674 CAB WIRING HARNESS T207993

1674-4

-UN-12FEB05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(12-APR-06) PN=228


1674-5 VEHICLE ELECTRICAL SYSTEMS 16

WIRING HARNESS AND SWITCHES 1674 CAB WIRING HARNESS

KEY

PART NO.

PART NAME

QTY.

1 2 3

19M7784 AT336352 57M8131

SCREW WIRING HARNESS ELEC. CONNECTOR TERMINAL

4 5 6 7 8 9

AT301498 AT47069 R44302 T211532 T78787 19M7923

PLATE GROUND CABLE TIE BAND LABEL CLAMP CAP SCREW

700J CRAWLER DOZER (S.N. -139435)

PC9473

1 1 1 1 1 AR 1 1 2

(13-APR-07)

SERIAL NO.

REMARKS

M10 X 20 (CAB) (SUB FOR AT307986) (3 WAY DT CAN BUS RECEPTACLE)(CAN TERMINATION RESISTOR) (MOUNTING) 16", (STARTER GROUND STRAP) (CAB FUSE BLOCK) (HOSE) M6 X 12

1674-5

PN=229


1674-6 VEHICLE ELECTRICAL SYSTEMS 16

WIRING HARNESS AND SWITCHES 1674 ROPS WIRING HARNESS T207994

1674-6

-UN-12FEB05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(12-APR-06) PN=230


1674-7 VEHICLE ELECTRICAL SYSTEMS 16

WIRING HARNESS AND SWITCHES 1674 ROPS WIRING HARNESS

KEY

1 2 3 4 5

PART NO.

AT307984 AT301498 R44302 T211532 19M7923

PART NAME

QTY.

WIRING HARNESS PLATE TIE BAND LABEL CAP SCREW

700J CRAWLER DOZER (S.N. -139435)

PC9473

1 1 AR 1 2

(04-AUG-05)

SERIAL NO.

REMARKS

(ROPS WIRING HARNESS) (MOUNTING) (FUSE BLOCK) M6 X 12

1674-7

PN=231


1674-8 VEHICLE ELECTRICAL SYSTEMS 16

WIRING HARNESS AND SWITCHES 1674 ENGINE WIRING HARNESS T205172

1674-8

-UN-14JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(04-AUG-05) PN=232


1674-9 VEHICLE ELECTRICAL SYSTEMS 16

WIRING HARNESS AND SWITCHES 1674 ENGINE WIRING HARNESS

KEY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

PART NO.

12H295 14M7273 14M7274 14M7297 14M7303 19M7775 19M7784 19M7788 24M7238 AT145341 AT307980 57M8131 T28949 T74416 T75197 T76697 T78974

PART NAME

QTY.

LOCK WASHER NUT NUT NUT FLANGE NUT SCREW SCREW SCREW WASHER RELAY WIRING HARNESS ELEC. CONNECTOR TERMINAL CLAMP CLAMP CLAMP ANGLE CLAMP

700J CRAWLER DOZER (S.N. -139435)

PC9473

(04-AUG-05)

2 1 1 2 2 2 5 1 1 1 1 1 1 2 3 1 3

SERIAL NO.

REMARKS

M8 M10 M5 M6 M6 X 16 M10 X 20 M12 X 25 8.700 X 17 X 2 MM (100AMP-24V START RELAY) (ENGINE) (CAN TERMINATION RESISTOR)

(BRACKET, PARK BRAKE RETURN SPRING)

1674-9

PN=233


1674-10 VEHICLE ELECTRICAL SYSTEMS 16

WIRING HARNESS AND SWITCHES 1674 CAB FUSES AND RELAYS T203994

1674-10

-UN-01FEB05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=234


1674-11 VEHICLE ELECTRICAL SYSTEMS 16

WIRING HARNESS AND SWITCHES 1674 CAB FUSES AND RELAYS

KEY

PART NO.

PART NAME

QTY.

1 2 3 4 5

AT162863 57M7125 57M7121 99M7065 19M7938

RELAY FUSE FUSE FUSE CAP SCREW

5 9 10 2 2

6

24M7239

WASHER

2

7

99M7064

FUSE

1

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05)

SERIAL NO.

REMARKS

(30AMP) (PUSH-IN RELAY) (5 AMP) (10AMP) (15 AMP) M10 X 20, (NOT ILLUSTRATED) (USED TO FASTEN FUSE BLOCK) 10.700 X 21 X 2.500 MM, (NOT ILLUSTRATED) (USED TO FASTEN FUSE BLOCK) (7.5 AMP)

1674-11

PN=235


1674-12 VEHICLE ELECTRICAL SYSTEMS 16

WIRING HARNESS AND SWITCHES 1674 ROPS FUSES AND RELAYS T203995

1674-12

-UN-01FEB05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=236


1674-13 VEHICLE ELECTRICAL SYSTEMS 16

WIRING HARNESS AND SWITCHES 1674 ROPS FUSES AND RELAYS

KEY

PART NO.

PART NAME

QTY.

1 2 3 4 6

AT162863 57M7125 57M7121 99M7065 19M7938

RELAY FUSE FUSE FUSE CAP SCREW

3 6 5 2 2

7

24M7239

WASHER

2

8

99M7064

FUSE

1

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05)

SERIAL NO.

REMARKS

(30AMP) (PUSH-IN 24V RELAY WITH DIODE) 5 AMP 10 AMP 15 AMP M10 X 20, (NOT ILLUSTRATED) (USED TO FASTEN FUSE BLOCK) 10.700 X 21 X 2.500 MM, (NOT ILLUSTRATED) (USED TO FASTEN FUSE BLOCK) (7.5 AMP)

1674-13

PN=237


1676-2 VEHICLE ELECTRICAL SYSTEMS 16

INSTRUMENTS AND INDICATORS 1676 DASH AND MONITOR T216828

1676-2

-UN-31OCT05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(12-APR-06) PN=238


1676-3 VEHICLE ELECTRICAL SYSTEMS 16

INSTRUMENTS AND INDICATORS 1676 DASH AND MONITOR

KEY

PART NO.

PART NAME

QTY.

1 2 3

24H1272 37H95 AT160480

WASHER SCREW ALARM SYSTEM

1 4 1

4 5 6 7 8 9 10 11 12 13 14 15 16 17

AT195301 AT195302 AT307089 AT303862 AT324000 M115279 R111632 R44342 RE154222 AT312606 R78035 T226427 AT303867 T226430

SWITCH KEY VEHICLE MONITOR TOGGLE/ROCKER SWITCH INDICATOR PLUG KNOB NUT SWITCH POTENTIOMETER PUSH NUT WASHER TOGGLE/ROCKER SWITCH STOP

1 1 1 1 1 3 2 1 1 1 1 1 1 1

700J CRAWLER DOZER (S.N. -139435)

PC9473

(07-SEP-06)

SERIAL NO.

REMARKS

9/16" X 1-1/4" X 1/4" (SUB FOR AT160480, THIS APPLICATION) (ALARM 12 VOLT WITH SHUTTER) (KEY SWITCH) (SWITCH) (24 VOLT MONITOR) (WORK LIGHT SWITCH) (ON-OFF) (24V) (AMBER) 1", (SPECIAL HARDWARE) (REVERSE RATIO) (ENGINE SPEED) 1/4", (SPRING) (TAB) (SUB FOR T209995) (DECOUPLE/DECEL SWITCH) (SUB FOR T209917)

1676-3

PN=239


1678-2 VEHICLE ELECTRICAL SYSTEMS 16

SENSORS ENGINE OIL PRESSURE AND HYDRAULIC OIL TEMPERATURE SENSORS T204806

1678-2

-UN-12JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=240


1678-3 VEHICLE ELECTRICAL SYSTEMS 16

SENSORS ENGINE OIL PRESSURE AND HYDRAULIC OIL TEMPERATURE SENSORS

KEY

1 2 3

PART NO.

RE167207 RE48419 51M7041

PART NAME

QTY.

PRESSURE SENSOR SENSOR O-RING

700J CRAWLER DOZER (S.N. -139435)

PC9473

1 1 1

(03-FEB-05)

SERIAL NO.

REMARKS

(ENGINE OIL PRESSURE) (HYDRAULIC OIL TEMPERATURE) 11.300 X 2.200 MM

1678-3

PN=241


1741-2 FRAME, CHASSIS OR SUPPORTING STRUCTURE

17

ENGINE OR MAIN FRAME 1741 MAIN FRAME T204847

1741-2

-UN-19JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(04-AUG-05) PN=242


1741-3 FRAME, CHASSIS OR SUPPORTING STRUCTURE

17

ENGINE OR MAIN FRAME 1741 MAIN FRAME

KEY

2

PART NO.

PART NAME

QTY.

3 4 5 6 7 8

AT309176 14M7277 AT220918 19M7403 24M7240 AT220916 AT220914 AT315146

FRAME NUT COVER CAP SCREW WASHER COVER COVER COVER

1 10 1 14 20 1 1 2

9

AT315147

COVER

1

10 11 12 13 14 15 16 17

T151994 T29342 19M8011 T211078 T211079 19M7550 24M7296 T148411 T148410 19M7493

PLATE WASHER CAP SCREW GUARD GUARD CAP SCREW WASHER NUT NUT CAP SCREW

1 4 4 1 1 4 4 4 8 6

18

700J CRAWLER DOZER (S.N. -139435)

PC9473

(07-SEP-06)

SERIAL NO.

REMARKS

(SUB FOR AT210829) (CONVENIENCE ASSEMBLY) M20, (WELDNUT) (OIL DRAIN BOTTOM COVER) M12 X 35 13 X 25 X 3 MM (OIL PAN BOTTOM COVER) (MIDDLE BOTTOM COVER) (SUB FOR AT220912) (TRANSVERSE CASE BOTTOM SIDE COVERS) (SUB FOR AT220913) (TRANSVERSE CASE BOTTOM MIDDLE COVER) (TRANSVERSE CASE REAR COVER PLATE) M12 X 30 (SUB FOR T179875) (RIGHT ROPS GUARD) (SUB FOR T180080) (LEFT ROPS GUARD) M10 X 35 10.500 X 30 X 2.500 MM M10, (FOR 10MM PLATE) (FOR 8MM PLATE) M12 X 40

1741-3

PN=243


1743-2 FRAME, CHASSIS OR SUPPORTING STRUCTURE

17

YOKES 1743 CROSSBAR T204480

1743-2

-UN-04FEB05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(04-AUG-05) PN=244


1743-3 FRAME, CHASSIS OR SUPPORTING STRUCTURE

17

YOKES 1743 CROSSBAR

KEY

1 2 3 4 5 6 7

8 9 10 12 13 14

PART NO.

PART NAME

QTY.

19M7489 T176064 AT226804 AT184799 40M1873 AT128774 AT226610

CAP SCREW BUSHING PIN SEAL SNAP RING SELF-ALIGNING BUSHING CROSSBAR

3 3 2 4 4 2 1

AT226611

CROSSBAR

1

AT226430 AT226360 JD7797 E12379 T102136 T157251 AT221426

HOSE HOSE LUBRICATION FITTING NUT SEAL BUSHING PIN

2 2 2 2 2 1 1

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05)

SERIAL NO.

REMARKS

M16 X 45

(BALL) (LOW GROUND PRESSURE) (CONVENIENCE ASSEMBLY PROVIDED BY DUBUQUE) (ALSO ORDER (2) AT226430) (LONG TRACK, XLT) (CONVENIENCE ASSEMBLY PROVIDED BY DUBUQUE) (ALSO ORDER (2) AT226360) (LOW GROUND PRESSURE) (LUBE HOSE) (LONG TRACK, XLT) (LUBE HOSE) 1/8", (JAM NUT) (PIN)

1743-3

PN=245


1743-4 FRAME, CHASSIS OR SUPPORTING STRUCTURE

17

YOKES 1743 PIVOT SHAFTS TP67608

1743-4

-UN-08NOV99

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=246


1743-5 FRAME, CHASSIS OR SUPPORTING STRUCTURE

17

YOKES 1743 PIVOT SHAFTS

KEY

1 2 3 4 5 6 7 8 9

PART NO.

24M7242 19M8224 AT220474 AT220477 T175823 T175824 T49337 T81899 19M8002 15H685

PART NAME

QTY.

WASHER CAP SCREW SHAFT SHAFT RING SEAL RETAINER CAP CAP SCREW PIPE PLUG

700J CRAWLER DOZER (S.N. -139435)

28 28 1 1 2 2 4 2 8 2

PC9473

(03-FEB-05)

SERIAL NO.

REMARKS

21.400 X 42 X 5 MM M20 X 60 (LOW GROUND PRESSURE) (PIVOT SHAFT) (LONG TRACK, XLT) (PIVOT SHAFT) (SEALING RING) (PIVOT SHAFT BRACKET) M20 X 55

1743-5

PN=247


1743-6 FRAME, CHASSIS OR SUPPORTING STRUCTURE

17

YOKES 1743 CROSSBAR REMOTE LUBE, C-FRAME T203480

1743-6

-UN-28JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=248


1743-7 FRAME, CHASSIS OR SUPPORTING STRUCTURE

17

YOKES 1743 CROSSBAR REMOTE LUBE, C-FRAME

KEY

PART NO.

PART NAME

QTY.

1 2

R39832 AT221304

ADAPTER FITTING HYDRAULIC HOSE

3 2

3 4 5

E12379 JD7797 AT221302

NUT LUBRICATION FITTING HYDRAULIC HOSE

3 3 1

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05)

SERIAL NO.

REMARKS

(LUBE HOSE) (TO RIGHT CROSSBAR TRACK FRAME PIVOT, AND CENTER CROSSBAR PIVOT SHAFT) 1/8", (JAM NUT) (LUBE HOSE) (TO LEFT CROSSBAR TRACK FRAME PIVOT)

1743-7

PN=249


1749-2 FRAME, CHASSIS OR SUPPORTING STRUCTURE

17

CHASSIS WEIGHTS 1749 FRONT COUNTERWEIGHT TP67565

1749-2

-UN-10NOV99

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=250


1749-3 FRAME, CHASSIS OR SUPPORTING STRUCTURE

17

CHASSIS WEIGHTS 1749 FRONT COUNTERWEIGHT

KEY

1 2 3

PART NO.

T177818 24M7242 19M7963 19M8026

PART NAME

QTY.

COUNTERWEIGHT WASHER CAP SCREW CAP SCREW

700J CRAWLER DOZER (S.N. -139435)

PC9473

1 6 6 6

(12-APR-06)

SERIAL NO.

REMARKS

(TWO COUNTERWEIGHTS, MAX ALLOWED) 21.400 X 42 X 5 MM M20 X 100, (USE WITH ONE COUNTERWEIGHT) (USE WITH TWO COUNTERWEIGHTS)

1749-3

PN=251


1807-2 OPERATOR’S STATION

18

SPECIAL NOISE CONTROL ITEMS 1807 CAB NOISE REDUCTION FOAM/ISOLATOR T209549

1807-2

-UN-24MAR05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(12-APR-06) PN=252


1807-3 OPERATOR’S STATION

18

SPECIAL NOISE CONTROL ITEMS 1807 CAB NOISE REDUCTION FOAM/ISOLATOR

KEY

PART NO.

PART NAME

QTY.

1 2 3

T180751 T179907 AT316482

SEAL ISOLATOR ISOLATOR

1 1 1

4 5 6

T179923 T211947 T213889 T225284 T214209 T214238 T214242

ISOLATOR ISOLATOR ISOLATOR DOUBLE BAR SHOE ISOLATOR ISOLATOR ISOLATOR

1 2 1 1 1 1 1

7 8 9

700J CRAWLER DOZER (S.N. -139435)

PC9473

(07-SEP-06)

SERIAL NO.

-127710 127711-

REMARKS

(CONTROLER COVER) (FOAM INSULATION) (FOAM INSULATION)(UNDER SEAT HEATER ASSEMBLY) (ALSO REQUIRES AT317949 SPRAY ADHESIVE TO APPLY) (ALSO REQUIRES AT317949 SPRAY ADHESIVE) (ALSO REQUIRES AT317949 SPRAY ADHESIVE) (ALSO REQUIRES AT317949 SPRAY ADHESIVE) (ALSO REQUIRES AT317949 SPRAY ADHESIVE) (ALSO REQUIRES AT317949 SPRAY ADHESIVE) (ALSO REQUIRES AT317949 SPRAY ADHESIVE)

1807-3

PN=253


1807-4 OPERATOR’S STATION

18

SPECIAL NOISE CONTROL ITEMS 1807 CAB NOISE REDUCTION FOAM T208772

1807-4

-UN-17FEB05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(04-AUG-05) PN=254


1807-5 OPERATOR’S STATION

18

SPECIAL NOISE CONTROL ITEMS 1807 CAB NOISE REDUCTION FOAM

KEY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

PART NO.

AT223454 AT223447 ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........

PART NAME

QTY.

ISOLATOR ISOLATOR ISOLATOR ISOLATOR ISOLATOR ISOLATOR ISOLATOR ISOLATOR ISOLATOR ISOLATOR ISOLATOR ISOLATOR ISOLATOR ISOLATOR ISOLATOR ISOLATOR ISOLATOR ISOLATOR ISOLATOR ISOLATOR

700J CRAWLER DOZER (S.N. -139435)

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

PC9473

(04-AUG-05)

SERIAL NO.

REMARKS

(SUB AT223447) (SUB AT223447) (SUB AT223447) (SUB AT223447) (SUB AT223447) (SUB AT223447) (SUB AT223447) (SUB AT223447) (SUB AT223454) (SUB AT223454) (SUB AT223454) (SUB AT223454) (SUB AT223454) (SUB AT223454) (SUB AT223454) (SUB AT223454) (SUB AT223454) (SUB AT223454)

1807-5

PN=255


1810-2 OPERATOR’S STATION

18

OPERATOR ENCLOSURE 1810 ROPS COMPONENTS T206507

1810-2

-UN-27JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=256


1810-3 OPERATOR’S STATION

18

OPERATOR ENCLOSURE 1810 ROPS COMPONENTS

KEY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 24 25 26 27 28 29 30 31 32 33 34 35 37 38

PART NO.

T176903 T176904 24M7238 14H785 T151711 AT186760 19M7923 T213861 T210774 T146097 T157172 T177890 T178472 24M7239 19M7402 T174600 19M8425 24M7293 AT141724 T186793 T16464 AT304200 R50406 T201606 T152230 T204691 T205289 T205726 21M7265 U43021 19M7662 T209860 R54477 AT306587 T176958 ........

PART NAME

QTY.

HEADLINER HEADLINER WASHER NUT LABEL REAR VIEW MIRROR CAP SCREW LABEL LABEL LABEL LABEL LABEL LABEL WASHER CAP SCREW BRACKET CAP SCREW WASHER LOCK LABEL LOCK NUT COVER O-RING PLATE PLUG ISOLATOR PANEL LATCH SCREW BUMPER CAP SCREW LABEL RIVET LABEL PLUG ISOLATOR

700J CRAWLER DOZER (S.N. -139435)

PC9473

1 1 2 1 1 1 3 1 1 1 1 1 1 2 2 1 4 4 1 14 1 1 1 1 6 1 1 1 3 2 6 1 2 1 2 1

(04-AUG-05)

SERIAL NO.

REMARKS

(REAR) (FRONT) 8.700 X 17 X 2 MM 5/16" (PARK LOCK LEFT) M6 X 12 (SAFETY START AND CAUTION LABEL) (ROPS) (SEAT BELT WARNING) (KEY START LABEL) (HYDRAULIC 6-WAY BLADE) (SEAT BASE TILT PROCEDURE LABEL) 10.700 X 21 X 2.500 MM M10 X 25 (BULKHEAD) M6 X 16 6.500 X 13 X 1.600 MM (VANDAL COVER CAM CYLINDER LOCK) (GRAY CIRCLE LABELS) 5/16" (VANDAL COVER) 42.164 X 6.985 MM (SWITCH FACE PLATE) (MOLDING) (LOWER DASH) (VANDAL COVER) M5 X 12 M10 X 30 (SYSTEM WARM UP-ENGINE SPEED) (REVERSE SPEED LABEL) (WINDOW PLUG) (MAKE FROM T58056 (0.5 FT))

1810-3

PN=257


1810-4 OPERATOR’S STATION

18

OPERATOR ENCLOSURE 1810 CAB COMPONENTS (SERIAL NO. -XXXXXX) T206519

1810-4

-UN-26JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(12-APR-06) PN=258


1810-5 OPERATOR’S STATION

18

OPERATOR ENCLOSURE 1810 CAB COMPONENTS (SERIAL NO. -XXXXXX)

KEY

2 3 4 5 13 14 15 16 17 18 19 20 21 22 24 25 26 27 28 29 30 31 32 33 34 35 36 38 39 40 41 42 43 44 46 47 48 49 50 51 52 55 57 60 61 64 67 68 69 70

PART NO.

PART NAME

QTY.

SERIAL NO.

T177169 T134895 AT314728 M84972 AT186760 14H785 24M7238 T177568 T218457 24M7239 19M8324 R50406 T213861 T152230 T201606 T151711 T146097 T157172 T177890 T186793 19M7402 T174600 19M8425 24M7293 AT306587 T178472 24M7139 T210774 T204691 T176296 T148409 T176818 T205289

CLIP SELF-LOCKING SCREW COVER NUT REAR VIEW MIRROR NUT WASHER BRACKET BRACKET WASHER CAP SCREW O-RING LABEL PLUG PLATE LABEL LABEL LABEL LABEL LABEL CAP SCREW BRACKET CAP SCREW WASHER LABEL LABEL WASHER LABEL ISOLATOR WING SCREW NUT SEAL PANEL

2 6 1 4 1 1 2 1 -XXXXXX 1 XXXXXX6 2 1 1 3 1 1 1 1 1 7 2 1 5 4 1 1 1 1 1 2 2 1 1

21M7265 T210591 T178665 T216631 T176268 T176269 19M7775 19M7866 T176270 AT221228 R54477 AT324134 T176888 19M7662 T209860 T16464 19M8637 T176958 ........ T203442

SCREW PAD COVER COVER PLATE PLATE SCREW SCREW PLATE CLIP RIVET COVER PLATE CAP SCREW LABEL LOCK NUT CAP SCREW PLUG ISOLATOR SEAL

3 1 1 -XXXXXX 1 XXXXXX1 1 4 12 1 1 1 1 1 4 1 1 2 2 1 1

REMARKS

M6 X 25 (GUARD) 5/16" 8.700 X 17 X 2 MM (MOUNTING) 10.700 X 21 X 2.500 MM M10 X 16 1.660" X 0.275" (SAFETY START AND CAUTION) (SWITCH PLATE) (PARK LOCK) (SEAT BELT WARNING) (KEY START) (HYDRAULIC 6-WAY BLADE) (GRAY CIRCLE) M10 X 25 (BULKHEAD) M6 X 16 6.500 X 13 X 1.600 MM (REVERSE SPEED) (SEAT BASE TILT PROCEDURE) 6.400 X 18 X 1.600 MM (ROPS) (MOLDING) M10 (FUSE COVER PLATE) (LOWER DASH PANEL) (ALSO ORDER FUSE BLOCK LABEL) M5 X 12 (FOAM INSULATION) (FILTER COVER) (AIR CONDITIONER SIDE COVER) (RIGHT) (AIR CONDITIONER SIDE COVER) (LEFT) M6 X 16 M8 X 20 (AIR CONDITIONER REAR COVER) 3/16" (SUB FOR AT221055) (AIR RECIRCULATION) M10 X 30 (SYSTEM WARM UP-ENGINE SPEED) 5/16" M10 X 40 (WINDOW PLUG) (MAKE FROM T58056 (0.5 FT)) (SEAL, SINGLE LEVER CONTROL)

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(12-APR-06)

1810-5

PN=259


1810-5A OPERATOR’S STATION

18

OPERATOR ENCLOSURE 1810 CAB COMPONENTS (SERIAL NO.XXXXXX- ) T214465

1810-5A

-UN-15SEP05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(07-SEP-06) PN=260


1810-5B OPERATOR’S STATION

18

OPERATOR ENCLOSURE 1810 CAB COMPONENTS (SERIAL NO. XXXXXX- )

KEY

PART NO.

PART NAME

QTY.

2 3 4 5 13 14 15 16 17 18 19 20 21 22 24 25 26 27 28 29 30 31 32 33 34 35 36 38 39 40 41 42

19M7863 19M7865 AT314728 M84972 AT186760 14H785 24M7238 24M7207 24M7239 19M8324 R50406 24M7296 T152230 T201606 T151711 T146097 T157172 T177890 T186793 19M7402 T174600 19M8425 24M7293 AT306587 T178472 24M7139 T210774 T204691 T176296 T148409 T176818 T205289

SCREW SCREW COVER NUT REAR VIEW MIRROR NUT WASHER WASHER WASHER CAP SCREW O-RING WASHER PLUG PLATE LABEL LABEL LABEL LABEL LABEL CAP SCREW BRACKET CAP SCREW WASHER LABEL LABEL WASHER LABEL ISOLATOR WING SCREW NUT SEAL PANEL

2 2 1 4 1 1 2 2 6 2 1 6 3 1 1 1 1 1 7 2 1 5 4 1 1 1 1 1 2 2 1 1

43 44 46 47

21M7265 T210591 T216631 T176268 T176269 19M7775 19M7866 T176270 AT221228 R54477 AT227668 AT227669 19M7662 T209860 T16464 19M8637 T176958 ........ T203442 AT322708 AZ43305 37M7333 T213861 T217327 T218063 T218435 T218457 TT206940 TT207136

SCREW PAD COVER PLATE PLATE SCREW SCREW PLATE CLIP RIVET LOUVER LOUVER CAP SCREW LABEL LOCK NUT CAP SCREW PLUG ISOLATOR SEAL HEADLINER NOZZLE SCREW LABEL COVER ISOLATOR PLATE BRACKET LAMP BULB

3 1 1 1 1 4 18 1 1 1 6 2 4 1 1 2 2 1 1 1 1 22 1 1 1 1 1 1 1

48 49 50 51 52 55 57 60 61 64 67 68 69 70 71 72 73 74 75 76 77 78 79

SERIAL NO.

REMARKS

M6 X 25 M8 X 16 (GUARD) 5/16" 8.700 X 17 X 2 MM 10.700 X 21 X 2.500 MM M10 X 16 1.660" X 0.275" 10.500 X 30 X 2.500 MM (SWITCH PLATE) (PARK LOCK) (SEAT BELT WARNING) (KEY START) (HYDRAULIC 6-WAY BLADE) (GRAY CIRCLE) M10 X 25 (BULKHEAD) M6 X 16 6.500 X 13 X 1.600 MM (REVERSE SPEED) (SEAT BASE TILT PROCEDURE) 6.400 X 18 X 1.600 MM (ROPS) (MOLDING) M10 (FUSE COVER PLATE) (LOWER DASH PANEL) (ALSO ORDER FUSE BLOCK LABEL) M5 X 12 (FOAM INSULATION) (AIR CONDITIONER SIDE COVER) (RIGHT) (AIR CONDITIONER SIDE COVER) (LEFT) M6 X 16 M8 X 20 (AIR CONDITIONER REAR COVER) 3/16" (SUB FOR AT221055) (RECTANGULAR) (ROUND) M10 X 30 (SYSTEM WARM UP-ENGINE SPEED) 5/16" M10 X 40 (WINDOW PLUG) (MAKE FROM T58056 (0.5 FT)) (SEAL, SINGLE LEVER CONTROL)

(CAUTION AND START LABEL) (RECIRCULATING) (FOAM) (MIRROR) (INCLUDES TT207136) (COMPONENT OF TT207136)

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(07-SEP-06)

1810-5B

PN=261


1810-6 OPERATOR’S STATION

18

OPERATOR ENCLOSURE 1810 CAB HEADLINER COMPONENTS (SERIAL NO. -XXXXXX) T207505

1810-6

-UN-27JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(07-SEP-06) PN=262


1810-7 OPERATOR’S STATION

18

OPERATOR ENCLOSURE 1810 CAB HEADLINER COMPONENTS (SERIAL NO. -XXXXXX)

KEY

1 3 5 6 7 8 9 10 11 12 23 56 58 59

63 65 66

PART NO.

PART NAME

QTY.

T174490 T134895 M84972 M115279 T175963 T180755 AT324136 T159946 AT227668 T159945 T203512 AT324135 AT227669 AT221808 TT206940

ISOLATOR SELF-LOCKING SCREW NUT PLUG PLATE LABEL HEADLINER NUT LOUVER SCREW COVER HEADLINER LOUVER LAMP LAMP

1 4 4 3 1 1 1 20 6 20 1 1 2 1 1

TT207136 AT313962 T208918 T208937

BULB LOUVER ISOLATOR ISOLATOR

1 1 1 1

700J CRAWLER DOZER (S.N. -139435)

PC9473

(07-SEP-06)

SERIAL NO.

REMARKS

(FOAM DUCTWORK) M6 X 25 (RADIO BLANKING) (HEATER AND FAN CONTROL) (FRONT WITH LOUVERS) (SUB FOR AT313496) (SPECIAL) (RECTANGULAR) (RADIO) (REAR WITH LOUVERS) (SUB FOR AT313494) (DEFROST) (DOME) (INTERIOR LIGHT) (24V/10W) (INCLUDES TT207136) (COMPONENT OF TT206940) (ROUND) (FOAM, REAR) (FOAM, REAR)

1810-7

PN=263


1810-8 OPERATOR’S STATION

18

OPERATOR ENCLOSURE 1810 CAB AND ROPS ASSEMBLED PLATES T204618

1810-8

-UN-25JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=264


1810-9 OPERATOR’S STATION

18

OPERATOR ENCLOSURE 1810 CAB AND ROPS ASSEMBLED PLATES

KEY

1 2 3 4 5 6 10 11 12 13

PART NO.

AT210886 T174841 T175244 19M7402 24M7296 19M7662 T176522 T176523 T176524 T179732

PART NAME

QTY.

PLATE FOOTREST PLATE CAP SCREW WASHER CAP SCREW ISOLATOR ISOLATOR ISOLATOR ISOLATOR

700J CRAWLER DOZER (S.N. -139435)

1 2 2 4 6 6 1 2 1 1

PC9473

(03-FEB-05)

SERIAL NO.

REMARKS

(FLOOR) (FOOTREST) M10 X 25 10.500 X 30 X 2.500 MM M10 X 30 (FLOOR PLATE)(CAB) (FLOOR PLATE)(CAB) (FLOOR PLATE)(CAB) (MOLDING)

1810-9

PN=265


1810-10 OPERATOR’S STATION

18

OPERATOR ENCLOSURE 1810 FLOOR MAT T205610

1810-10

-UN-12JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=266


1810-11 OPERATOR’S STATION

18

OPERATOR ENCLOSURE 1810 FLOOR MAT

KEY

1

PART NO.

T172763

PART NAME

QTY.

MAT

700J CRAWLER DOZER (S.N. -139435)

SERIAL NO.

REMARKS

1

PC9473

(03-FEB-05)

1810-11

PN=267


1810-12 OPERATOR’S STATION

18

OPERATOR ENCLOSURE 1810 OPERATOR STATION ACCESSORIES T205608

1810-12

-UN-12JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=268


1810-13 OPERATOR’S STATION

18

OPERATOR ENCLOSURE 1810 OPERAT0R STATION ACCESSORIES

KEY

1

PART NO.

PART NAME

QTY.

SERIAL NO.

2 3 4 5 6 7

AT211577 AT326272 19H3392 24M7028 T11234 24M7239 19M8324 AT220105

REAR VIEW MIRROR REAR VIEW MIRROR CAP SCREW WASHER LOCK NUT WASHER CAP SCREW PAD

1 -XXXXXX 1 XXXXXX1 1 1 6 2 2

8 9 10 11 12 13 14

19M7402 AT221283 19M8425 24M7139 AT208436 AT221574 37M7059

CAP SCREW HOLDER CAP SCREW WASHER TOOLBOX KIT SCREW

4 1 1 1 1 1 7

700J CRAWLER DOZER (S.N. -139435)

PC9473

(12-APR-06)

REMARKS

(ALSO ORDER (2) 19M8324 AND (2) 24M7239) 3/8" X 9", (CARRIAGE) 10.500 X 20 X 2 MM 3/8" 10.700 X 21 X 2.500 MM M10 X 16 (KNEE) (ALSO ORDER (2) 19M7402 AND (2) 24M7239) M10 X 25 (LUNCHBOX TRAY AND CUP) M6 X 16 6.400 X 18 X 1.600 MM (ALSO ORDER 24M7139 AND 19M8425) (WHOLEGOODS)(OPERATOR STATION ACCESSORY KIT) M5 X 12

1810-13

PN=269


1810-14 OPERATOR’S STATION

18

OPERATOR ENCLOSURE 1810 REAR ATTACHMENTS MIRROR T205471

1810-14

-UN-29DEC04

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=270


1810-15 OPERATOR’S STATION

18

OPERATOR ENCLOSURE 1810 REAR ATTACHMENTS MIRROR

KEY

1 2 3 4 5 6

PART NO.

14H785 14M7426 19M7407 24M7238 AT186760 T180047

PART NAME

QTY.

NUT LOCK NUT CAP SCREW WASHER REAR VIEW MIRROR BRACKET

700J CRAWLER DOZER (S.N. -139435)

PC9473

2 2 2 6 1 1

(03-FEB-05)

SERIAL NO.

REMARKS

5/16" M8 M8 X 25 8.700 X 17 X 2 MM (REAR ATTACHMENT MIRROR)

1810-15

PN=271


1811-2 OPERATOR’S STATION

18

ROPS 1811 ROPS STRUCTURE T205619

1811-2

-UN-04FEB05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(04-AUG-05) PN=272


1811-3 OPERATOR’S STATION

18

ROPS 1811 ROPS STRUCTURE

KEY

PART NO.

PART NAME

QTY.

1

AT322354

ROPS

1

2 4 5 6 7 8 9 10 11 14

AT220265 T171778 N31296 R46528 24M7293 19M8425 AT209308 19M7402 T171737 T178425

BASE BRACKET PIN FASTENER SPRING LOCKING PIN WASHER CAP SCREW JACK CAP SCREW WASHER STRIP

1 1 1 1 2 2 1 6 2 2

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05)

SERIAL NO.

REMARKS

(ROPS STRUCTURE WELDMENT)(CONVENIENCE ASSEMBLY) (NON-HEATER SEAT) (SEAT TILTING) (FLAT HEAD) (CLIP) 6.500 X 13 X 1.600 MM M6 X 16 (SEAT JACK) M10 X 25 (SPACER)(TILTING PIVOT) (SPACER) (WITHOUT ROPS HEATER)

1811-3

PN=273


1811-4 OPERATOR’S STATION

18

ROPS 1811 CAB STRUCTURE T205625

1811-4

-UN-04FEB05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(04-AUG-05) PN=274


1811-5 OPERATOR’S STATION

18

ROPS 1811 CAB STRUCTURE

KEY

PART NO.

PART NAME

QTY.

1

AT322353

CAB FRAME

1

3 5 6 7 8 9 10 11

AT207486 19M7402 T171778 AT209308 N31296 R46528 24M7293 19M8425

BASE CAP SCREW BRACKET JACK PIN FASTENER SPRING LOCKING PIN WASHER CAP SCREW

1 6 1 1 1 1 2 2

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05)

SERIAL NO.

REMARKS

(CAB STRUCTURE WELDMENT)(CONVENIENCE ASSEMBLY) (SEAT) (WITH HEATER) M10 X 25 (SEAT TILTING) (JACK) (FLAT HEAD) (CLIP) 6.500 X 13 X 1.600 MM M6 X 16

1811-5

PN=275


1811-6 OPERATOR’S STATION

18

ROPS 1811 ROPS, CAB, MOUNTS AND ISOLATORS T206482

1811-6

-UN-13JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=276


1811-7 OPERATOR’S STATION

18

ROPS 1811 ROPS, CAB, MOUNTS AND ISOLATORS

KEY

1 2 3

PART NO.

19M7963 T101807 AT225563

PART NAME

QTY.

CAP SCREW WASHER ISOLATOR

700J CRAWLER DOZER (S.N. -139435)

4 4 4

PC9473

(03-FEB-05)

SERIAL NO.

REMARKS

M20 X 100 0.866" X 3-1/2" X 5/16"

1811-7

PN=277


1813-2 OPERATOR’S STATION

18

DOORS 1813 CAB DOORS AND LATCHES TX1012441

1813-2

-UN-05OCT06

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(15-DEC-06) PN=278


1813-3 OPERATOR’S STATION

18

DOORS 1813 CAB DOORS AND LATCHES

KEY

1 2 3 4 5 6 7 8 9 10 11 12 14 15 16 17 18 19 20 23 25 27 28 29 30 31 32 33 34

PART NO.

AT306744 AT306798 19M7938 24M7239 14M7165 24M7139 T175674 T210413 T160017 AT312708 AT312707 AT306182 T204577 T204576 TCU14336 T210101 21M7326 21M7289 19M7863 T204599 T205901 T205902 AT306181 T205160 T205205 T210102 T210105 T210103 AT307746 AT307745 T210106 AT307096 T205499 AT306743 AT306799

PART NAME

QTY.

DOOR DOOR CAP SCREW WASHER LOCK NUT WASHER WASHER WASHER SPACER LEVER LEVER LATCH COVER COVER SCREW YOKE SCREW SCREW SCREW GASKET WASHER SPACER HANDLE WINDOWPANE WINDOWPANE PIN FASTENER LINK RING ISOLATOR ISOLATOR SPRING STRIKER GUARD DOOR DOOR

700J CRAWLER DOZER (S.N. -139435)

1 1 6 6 2 2 2 4 2 1 1 1 1 1 2 1 2 2 3 1 1 1 1 1 1 1 1 1 1 1 1 2 2 1 1

PC9473

(15-DEC-06)

SERIAL NO.

REMARKS

(RIGHT CAB DOOR) (LEFT CAB DOOR) M10 X 20 10.700 X 21 X 2.500 MM M6 6.400 X 18 X 1.600 MM (SPRING) 6.400 X 18 X 1.500 MM, (NYLON) (LATCH) (RIGHT DOOR LATCH) (LEFT DOOR LATCH) (RIGHT DOOR LATCH) (LEFT DOOR LATCH) M6 X 16 (CLEVIS) M6 X 20 M6 X 40 M6 X 25 (DOOR LATCH GASKET) (PULL HANDLE) (ROUND SPACER) (PULL HANDLE) (OUTER DOOR) (RIGHT DOOR GLASS) (LEFT DOOR GLASS) (DOOR LATCH CLEVIS) (CLEVIS PIN) (SEAL) (RIGHT HAND) (SEAL) (LEFT HAND) (DOOR LATCH) (STRIKER PIN) (STRIKER PIN GUARD) (R.H.) (L.H.)

1813-3

PN=279


1813-4 OPERATOR’S STATION

18

DOORS 1813 CAB DOOR HOLD OPEN LATCH TP67759

1813-4

-UN-07SEP00

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=280


1813-5 OPERATOR’S STATION

18

DOORS 1813 CAB DOOR HOLD OPEN LATCH

KEY

1 2 3 4 5 6 7 8 9 10 11 12 13 14

PART NO.

T176473 14M7273 19M7933 24H1646 AT222258 T58920 14H611 14M7166 H110232 28H1515 AT223377 19M8397 R76454 N157204

PART NAME

QTY.

BUMPER NUT CAP SCREW WASHER LATCH BUMPER NUT LOCK NUT WASHER BUSHING LEVER CAP SCREW GROMMET GRIP

700J CRAWLER DOZER (S.N. -139435)

2 2 4 4 2 2 2 2 4 2 2 2 2 2

PC9473

(03-FEB-05)

SERIAL NO.

REMARKS

(DOOR) M8 M6 X 25 17/64" X 3/4" X 0.060" 5/16" M8 (DOOR) 0.364" X 0.540" X 1-3/8" M8 X 50 (HANDLE)

1813-5

PN=281


1814-2 OPERATOR’S STATION

18

WINDSHIELD AND WIPERS 1814 CAB WINDOWS TP67734

1814-2

-UN-23MAY00

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=282


1814-3 OPERATOR’S STATION

18

WINDSHIELD AND WIPERS 1814 CAB WINDOWS

KEY

1 2 3 4 5 6 7 8 9

PART NO.

T175748 T177364 T227018 T177365 T227019 T177179 T176958 T176959 AT223821 AT335803 AT335804

PART NAME

QTY.

WINDSHIELD WINDSHIELD WINDSHIELD WINDSHIELD WINDSHIELD WINDOWPANE PLUG PLUG LATCH WINDOW WINDOW

700J CRAWLER DOZER (S.N. -139435)

1 2 2 2 2 1 2 1 2 1 1

PC9473

(13-APR-07)

SERIAL NO.

-131553 131554-131553 131554-

REMARKS

(FRONT WINDOW GLASS) (STATIONARY GLASS) (SLIDING GLASS) (REAR WINDOW) (WINDOW) (WINDOW) (REPLACEMENT LOCK KIT) (SUB FOR AT318267) (LEFT SIDE) (SUB FOR AT318268) (RIGHT SIDE)

1814-3

PN=283


1814-4 OPERATOR’S STATION

18

WINDSHIELD AND WIPERS 1814 WIPER WASHER TANK T205724

1814-4

-UN-28JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=284


1814-5 OPERATOR’S STATION

18

WINDSHIELD AND WIPERS 1814 WIPER WASHER TANK

KEY

1 2 3 4 5 6 9

PART NO.

AT221355 T178724 AT173193 AT173192 ........ R44302 19M7774

PART NAME

QTY.

RESERVOIR RESERVOIR CAP PUMP HOSE TIE BAND SCREW

700J CRAWLER DOZER (S.N. -139435)

1 1 1 2 2 2 3

PC9473

(03-FEB-05)

SERIAL NO.

REMARKS

(WIPER WASHER TANK ASSEMBLY) (WIPER WASHER TANK) (24 VOLT) (MAKE FROM R120653 .7FT, CUT TO LENGTH) (NOT ILLUSTRATED) M6 X 12

1814-5

PN=285


1814-6 OPERATOR’S STATION

18

WINDSHIELD AND WIPERS 1814 WINDOW WIPERS T206476

1814-6

-UN-24JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=286


1814-7 OPERATOR’S STATION

18

WINDSHIELD AND WIPERS 1814 WINDOW WIPERS

KEY

1 2 3 4 5 6 7 8 10 11 12 13 14 15 16 17 19 20 21

PART NO.

........ T135764 AL153660 AT177131 AT188681 AT176958 AT221596 AT176959 AT221596 AT221045 AT304634 AT306674 AT303861 R44302 T159875 T176777 T176876 T74416 T176877 T176879 T176878

PART NAME

QTY.

HOSE TEE FITTING WIPER BLADE WIPER ARM KIT WIPER MOTOR PACKAGE OF PARTS WIPER MOTOR PACKAGE OF PARTS WIPER BLADE WIPER ARM WIPER MOTOR TOGGLE/ROCKER SWITCH TIE BAND COVER FLOW CONTROL HYD. VALVE GROMMET CLAMP GROMMET GROMMET GROMMET

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05)

1 1 1 2 1 1 2 1 2 2 1 1 2 29 2 2 2 2 2 2 2

SERIAL NO.

REMARKS

(MAKE FROM R120653, CUT TO LENGTH) (500MM) (CONNECTOR FITTING, BULKHEAD) (LEFT) (24V) (ATTACHING HARDWARE) (RIGHT) (24V) (ATTACHING HARDWARE) (FRONT) (WIPER/WASHER) (ON-OFF) (WIPER MOTOR) (HOSE CLAMP)

1814-7

PN=287


1814-8 OPERATOR’S STATION

18

WINDSHIELD AND WIPERS 1814 OPTIONAL REAR WIPER T200404

1814-8

-UN-26MAY04

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=288


1814-9 OPERATOR’S STATION

18

WINDSHIELD AND WIPERS 1814 OPTIONAL REAR WIPER

KEY

1 2 3 4 5 6 7 8 9 10 11 12

PART NO.

AT177132 AT176958 AT221578 R44302 T159875 T176878 T176879 ........ ........ T135764 T176777 AT221596 AT177131 AT221104

PART NAME

QTY.

WIPER BLADE WIPER MOTOR WIPER MOTOR WIRING HARNESS TIE BAND COVER GROMMET GROMMET HOSE HOSE TEE FITTING FLOW CONTROL HYD. VALVE PACKAGE OF PARTS WIPER ARM WINDSHIELD WIPER

1 1 1 AR 1 1 1 1 1 1 2 1 1 1

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05)

SERIAL NO.

REMARKS

(REAR) (NOT ILLUSRTATED) (NOT ILLUSTRATED) (WIPER) (MAKE FROM R120653, 3.5FT CUT TO LENGTH) (MAKE FROM R120653, .3FT CUT TO LENGTH) (SPECIAL ATTACHING HARDWARE) (OPTIONAL REAR WIPER KIT)(FIELD EQUIPMENT) (INCLUDES WIRING HARNESS AT221578)

1814-9

PN=289


1821-2 OPERATOR’S STATION

18

SEAT AND SEAT BELTS 1821 SEAT (STANDARD) TX1000697A

1821-2

-UN-30NOV05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(12-APR-06) PN=290


1821-3 OPERATOR’S STATION

18

SEAT AND SEAT BELTS 1821 SEAT (STANDARD)

KEY

PART NO.

PART NAME

QTY.

1

AT209259

SEAT SUSPENSION

1

2 3 4

AT221015 AT221016 T171686 AT220292

SEAT PAD CLIP SEAT BELT

1 1 4 1

5

AT211579

SEAT SUSPENSION

1

700J CRAWLER DOZER (S.N. -139435)

PC9473

(12-APR-06)

SERIAL NO.

REMARKS

(DOES NOT INCLUDE SEAT BELT-SEAT BELT MUST BE ORDERED SEPARATELY) (SEAT BOTTOM PAD) (INCLUDES (4) T171686) (SEAT BACK PAD) (COMPONENT OF AT221016) (2 INCH)(MUST BE ORDERED SEPARATELY-NOT INCLUDED WITH SEAT) (COMPONENTS ON SEAT SUSPENSION PAGES) (SEAT BASE PLATE (MOUNTING BRACKET/RISER AT210791) MUST BE ORDERED SEPARATLY)

1821-3

PN=291


1821-4 OPERATOR’S STATION

18

SEAT AND SEAT BELTS 1821 SEAT ARMREST AND OPERATOR MANUAL HOLDER (STANDARD) T188997

1821-4

-UN-02APR03

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=292


1821-5 OPERATOR’S STATION

18

SEAT AND SEAT BELTS 1821 SEAT ARMREST AND OPERATOR MANUAL HOLDER (STANDARD)

KEY

2 3 4 5 6 9 10 11 12 13 14

PART NO.

AT223247 T179167 24M7296 19M7938 19M7402 AT210791 24M7239 T16464 19M7402 R77914 AT195894

PART NAME

QTY.

ARMREST PLATE WASHER CAP SCREW CAP SCREW BRACKET WASHER LOCK NUT CAP SCREW RIVET HOLDER

700J CRAWLER DOZER (S.N. -139435)

2 2 8 4 4 1 8 4 4 4 1

PC9473

(03-FEB-05)

SERIAL NO.

REMARKS

(ARMREST BRACKET) 10.500 X 30 X 2.500 MM M10 X 20 M10 X 25 (SEAT BASE PLATE)(MOUNTING BRACKET/RISER) 10.700 X 21 X 2.500 MM M10 X 25 (OPERATOR MANUAL HOLDER)

1821-5

PN=293


1821-6 OPERATOR’S STATION

18

SEAT AND SEAT BELTS 1821 MECHANICAL SEAT SUSPENSION (STANDARD) T189045B

1821-6

-UN-01APR03

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=294


1821-7 OPERATOR’S STATION

18

SEAT AND SEAT BELTS 1821 MECHANICAL SEAT SUSPENSION (STANDARD)

KEY

1 2 3 4 5 6 7 8 9 10

PART NO.

AT106397 AT125801 T55210 T63798 AT125803 AT125829 34H266 AT125805 25H729 T55222 AT175436 AT211579

PART NAME

QTY.

BEARING KIT SPRING SPRING PLUG BOOT KNOB SPRING PIN KIT GROOVE PIN BUSHING KIT SEAT SUSPENSION

700J CRAWLER DOZER (S.N. -139435)

PC9473

1 1 1 25 1 1 1 1 1 2 1 1

(03-FEB-05)

SERIAL NO.

REMARKS

(INCLUDES T55210) (COMPONENT OF AT125801)

(ADJUSTING KNOB) (INCLUDES 25H729) (COMPONENT OF AT125805) (SHOCK)

1821-7

PN=295


1821-8 OPERATOR’S STATION

18

SEAT AND SEAT BELTS 1821 SEAT SLIDE AND TILT CONTROL (ALL SEATS) T205945

1821-8

-UN-05JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=296


1821-9 OPERATOR’S STATION

18

SEAT AND SEAT BELTS 1821 SEAT SLIDE AND TILT CONTROL (ALL SEATS)

KEY

1 2 3 4 6 7 8 9 10 11 12

PART NO.

T163336 T55207 T163339 T163344 AT182479 AT209020 R72655 T163334 T163335 T163336 AT209021

PART NAME

QTY.

TORSION SPRING SPRING CONTROL ANGLE CONTROL KIT SNAP RING SPRING SPRING TORSION SPRING KIT

700J CRAWLER DOZER (S.N. -139435)

PC9473

1 2 1 2 1 1 4 1 1 1 1

(03-FEB-05)

SERIAL NO.

REMARKS

(SEAT TILT) (SLIDE/SEAT TILT CONTROL KIT) (SLIDE PUCK KIT) (RIGHT) (LEFT) (SLIDE SPRING KIT)

1821-9

PN=297


1821-10 OPERATOR’S STATION

18

SEAT AND SEAT BELTS 1821 SLIDER PLATE ASSEMBLY (ALL SEATS) T189049B

1821-10

-UN-01APR03

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=298


1821-11 OPERATOR’S STATION

18

SEAT AND SEAT BELTS 1821 SLIDER PLATE ASSEMBLY (ALL SEATS)

KEY

1 2 3 4 5

PART NO.

T163334 T163335 R72655 AT226470 AT226471

PART NAME

QTY.

SPRING SPRING SNAP RING KIT KIT

700J CRAWLER DOZER (S.N. -139435)

1 1 2 1 1

PC9473

(03-FEB-05)

SERIAL NO.

REMARKS

(SLIDE LATCH, RIGHT HAND) (SLIDE LATCH, LEFT HAND) (SLIDE LATCH) (UPPER PLATE SLIDER) (INCLUDES AT226470)

1821-11

PN=299


1821-12 OPERATOR’S STATION

18

SEAT AND SEAT BELTS 1821 SEAT (DELUXE) TX1000849A

1821-12

-UN-01DEC05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(12-APR-06) PN=300


1821-13 OPERATOR’S STATION

18

SEAT AND SEAT BELTS 1821 SEAT (DELUXE)

KEY

1

PART NO.

PART NAME

QTY.

AT226693

SEAT SUSPENSION

1

AT226694

SEAT SUSPENSION

1

3

AT221015 AT308795 AT221016

SEAT CUSHION PAD

1 1 1

4

AT308796 T171686 AT228292

CUSHION CLIP SEAT BELT

1 4 1

5

AT226685

SEAT SUSPENSION

1

6

AT221017 AT308797 AT220105

CUSHION CUSHION PAD

1 1 2

2

7

700J CRAWLER DOZER (S.N. -139435)

PC9473

(12-APR-06)

SERIAL NO.

REMARKS

(DELUXE VINYL WITH MECHANICAL SUSPENSION) (DOES NOT INCLUDE SEAT BELT-SEAT BELT SOLD SEPARATELY) (DELUXE CLOTH WITH MECHANICAL SUSPENSION) (DOES NOT INCLUDE SEAT BELT-SEAT BELT SOLD SEPARATELY) (DELUXE VINYL SEAT BOTTOM PAD) (DELUXE CLOTH SEAT BOTTOM PAD) (DELUXE VINYL SEAT BACK PAD) (INCLUDES (4) T171686) (DELUXE CLOTH SEAT BACK PAD) (COMPONENT OF AT221016 AND AT308796) (3 INCH)(NOT INCLUDED WITH SEAT-MUST BE ORDERED SEPARATELY) (DELUXE MECHANICAL SUSPENSION) (COMPONENTS ON MECHANICAL SUSPENSION PAGES) (HEADREST) (DELUXE VINYL) (HEADREST) (DELUXE CLOTH) (KNEE PAD) (NOT ILLUSTRATED)

1821-13

PN=301


1821-14 OPERATOR’S STATION

18

SEAT AND SEAT BELTS 1821 SEAT ARMREST AND OPERATOR MANUAL HOLDER (DELUXE/AIR SUSPENSION) T205760

1821-14

-UN-12JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=302


1821-15 OPERATOR’S STATION

18

SEAT AND SEAT BELTS 1821 SEAT ARMREST AND OPERATOR MANUAL HOLDER (DELUXE/AIR SUSPENSION)

KEY

1 2 3 4 7 8 9 10

PART NO.

AT223247 T179167 24M7296 19M7938 19M7402 24M7239 R77914 R77914 R77915 AT195894

PART NAME

QTY.

ARMREST PLATE WASHER CAP SCREW CAP SCREW WASHER RIVET RIVET HOLDER HOLDER

700J CRAWLER DOZER (S.N. -139435)

2 2 8 4 8 4 4 6 1 1

PC9473

(03-FEB-05)

SERIAL NO.

REMARKS

(ARMREST) 10.500 X 30 X 2.500 MM M10 X 20 M10 X 25 10.700 X 21 X 2.500 MM (WITH VINYL SEAT OPERATOR MANUAL HOLDER) (WITH CLOTH SEAT OPERATOR MANUAL HOLDER) (CLOTH SEAT OPERATOR MANUAL HOLDER) (VINYL SEAT OPERATOR MANUAL HOLDER)

1821-15

PN=303


1821-16 OPERATOR’S STATION

18

SEAT AND SEAT BELTS 1821 MECHANICAL SEAT SUSPENSION (DELUXE) T189062B

1821-16

-UN-01APR03

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=304


1821-17 OPERATOR’S STATION

18

SEAT AND SEAT BELTS 1821 MECHANICAL SEAT SUSPENSION (DELUXE)

KEY

1 2 3 4 5

PART NO.

AT226685 AT182589 AT173316 AT173323 AT173325

PART NAME

QTY.

SEAT SUSPENSION KNOB KNOB SEAT KNOB KIT WEIGHT

700J CRAWLER DOZER (S.N. -139435)

PC9473

1 1 1 1 1

(03-FEB-05)

SERIAL NO.

REMARKS

(DELUXE MECHANICAL SUSPENSION) (WEIGHT ADJUSTMENT) (KIT)(WEIGHT ADJUSTMENT KNOB) (KIT)

1821-17

PN=305


1821-18 OPERATOR’S STATION

18

SEAT AND SEAT BELTS 1821 MECHANICAL SEAT SUSPENSION KITS (DELUXE) T189060B

1821-18

-UN-01APR03

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=306


1821-19 OPERATOR’S STATION

18

SEAT AND SEAT BELTS 1821 MECHANICAL SEAT SUSPENSION KITS (DELUXE)

KEY

6 7 8 9 10 11

PART NO.

AT173313 AT173315 AT173314 AT173317 AT173321 AT173322

PART NAME

QTY.

SHAFT KIT SEAT BEARING ROLLER KIT BOOT SEAT SUSPENSION BOOT KIT MOUNTING PARTS

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05)

1 1 1 1 1 1

SERIAL NO.

REMARKS

(SEAT SUSPENSION SHAFT KIT) (TETHER BELT KIT) (INCLUDES AT173321) (KIT) (CLIP KIT) (SEAT SUSPENSION SHOCK KIT)

1821-19

PN=307


1821-20 OPERATOR’S STATION

18

SEAT AND SEAT BELTS 1821 MECHANICAL SEAT SUSPENSION SPRING KITS (DELUXE) T189063B

1821-20

-UN-01APR03

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=308


1821-21 OPERATOR’S STATION

18

SEAT AND SEAT BELTS 1821 MECHANICAL SEAT SUSPENSION SPRING KITS (DELUXE)

KEY

12 13 14 15 16 17 18

PART NO.

AT173328 AT173326 AT173327 AT210549 AT173319 AT173318 AT173320

PART NAME

QTY.

CAM CAM ACTUATOR BUMPER SPRING SPRING MOUNTING PARTS

700J CRAWLER DOZER (S.N. -139435)

PC9473

1 1 1 1 1 1 1

(03-FEB-05)

SERIAL NO.

REMARKS

(SMALL) (LARGE) (ACTUATOR BEARING SERV. KIT) (KIT) (HEIGHT ADJUSTMENT SPRING KIT) (HEIGHT ADJUSTMENT KIT)

1821-21

PN=309


1821-22 OPERATOR’S STATION

18

SEAT AND SEAT BELTS 1821 SEAT (AIR SUSPENSION) TX1000849A

1821-22

-UN-01DEC05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(12-APR-06) PN=310


1821-23 OPERATOR’S STATION

18

SEAT AND SEAT BELTS 1821 SEAT (AIR SUSPENSION)

KEY

1

PART NO.

PART NAME

QTY.

AT226697

SEAT SUSPENSION

1

AT226698

SEAT SUSPENSION

1

4

AT221015 AT308795 AT221016 AT308796 T171686 AT228292

SEAT CUSHION PAD CUSHION CLIP SEAT BELT

1 1 1 1 4 1

5

AT226686

SEAT SUSPENSION

1

AT208485

ARM

1

AT221017 AT308797

CUSHION CUSHION

1 1

2 3

6

700J CRAWLER DOZER (S.N. -139435)

PC9473

(12-APR-06)

SERIAL NO.

REMARKS

(AIR RIDE VINYL SEAT)(DOES NOT INCLUDE SEAT BELT-SEAT BELT SOLD SEPARATELY) (AIR RIDE CLOTH SEAT)(DOES NOT INCLUDE SEAT BELT-SEAT BELT SOLD SEPARATELY) (VINYL SEAT PAD) (CLOTH SEAT PAD) (VINYL SEAT BACK) (INCLUDES (4) T171686) (CLOTH SEAT BACK) (COMPONENT OF AT221016 AND AT308796) (3 INCH)(NOT INCLUDED WITH SEAT-MUST BE ORDERED SEPARATELY) (AIR RIDE SUSPENSION) (COMPONENTS ON AIR RIDE SUSPENSION PAGE) (INCLUDES AT208485) (NOT ILLUSTRATED) (AIR SUSPENSION ARM WELDMENT) (VINYL HEADREST) (CLOTH HEADREST)

1821-23

PN=311


1821-24 OPERATOR’S STATION

18

SEAT AND SEAT BELTS 1821 SEAT SUSPENSION (AIR SUSPENSION) (COMPONENT PARTS) T200900A

1821-24

-UN-16JUN04

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(12-APR-06) PN=312


1821-25 OPERATOR’S STATION

18

SEAT AND SEAT BELTS 1821 SEAT SUSPENSION (AIR SUSPENSION) (COMPONENT PARTS)

KEY

1

2 3 4 5 6 7 8 9

PART NO.

PART NAME

QTY.

AT226686

SEAT SUSPENSION

1

AT208484 AT208485

HOUSING ARM

1 1

T55224 AT173313 AT173315 AT173314 AT173321 AT208491 AT226676 AT208488 57M7121 AT224393

BUMPER SHAFT KIT SEAT BEARING ROLLER KIT SEAT SUSPENSION BOOT KIT KIT COMPRESSOR WIRING HARNESS FUSE WIRING HARNESS

1 1 1 1 1 1 1 1 1 1

T63817

GROMMET

1

700J CRAWLER DOZER (S.N. -139435)

PC9473

(12-APR-06)

SERIAL NO.

REMARKS

(AIR RIDE SUSPENSION 24 VOLT) (INCLUDES ALL PARTS ON THIS PAGE AND ALSO PARTS ON SEAT SUSPENSION/SHOCK ABSORBER KIT (AIR SUSPENSION) PAGE) (INCLUDES AT208485 AND T55224) (TOP PLATE ONLY)(NOT ILLUSTRATED ALONE) (NOT ILLUSTRATED) (AIR SUSPENSION ARM WELDMENT) (SUSPENSION SHAFT KIT) (TETHER KIT) (BOOT CLIP KIT) (BOOT KIT) (INCLUDES AT173321) (24 VOLT) 10 AMP (NOT ILLUSTRATED) (FROM SEAT SUSPENSION COMPRESSOR HARNESS TO FUSE BOX) (NOT INCLUDED IN SEAT SUSPENSION ASSEMBLY) (NOT ILLUSTRATED)

1821-25

PN=313


1821-26 OPERATOR’S STATION

18

SEAT AND SEAT BELTS 1821 SEAT SUSPENSION COMPONENTS & SHOCK ABSORBER KIT (AIR T215935A

1821-26

SUSPENSION)

-UN-11OCT05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(12-APR-06) PN=314


1821-27 OPERATOR’S STATION

18

SEAT AND SEAT BELTS 1821 SEAT SUSPENSION COMPONENTS & SHOCK ABSORBER KIT (AIR

KEY

PART NO.

PART NAME

QTY.

8 9 10

AT208487 T163394 AT226686

KIT SHOCK ABSORBER SEAT SUSPENSION

1 1 1

11 12 13 14

57M7121 AT224393 AT208490 AT208493 AT209469 AT208486

FUSE WIRING HARNESS SELECTIVE CONTROL VALVE FITTING KIT KIT ABSORBER

1 1 1 1 1 1

700J CRAWLER DOZER (S.N. -139435)

PC9473

(12-APR-06)

SERIAL NO.

SUSPENSION)

REMARKS

(AIR SUSPENSION SEAT SHOCK ABSORBER) (ALSO ORDER CAPSCREW 19H2038)(THE REST OF COMPONENTS FOUND ON ANOTHER AIR SUSPENSION PAGE) 10 AMP (FROM SEAT COMPRESSOR HARNESS TO FUSE BOX) (AIR CONTROL VALVE) (AIRLINE FITTING KIT) (BUMPER KIT) (AIR SPRING) (AIR BLADDER SPRING)

1821-27

PN=315


1821-28 OPERATOR’S STATION

18

SEAT AND SEAT BELTS 1821 LUMBAR KIT (DELUXE AND AIR SUSPENSION SEAT) T189058B

1821-28

-UN-04APR03

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=316


1821-29 OPERATOR’S STATION

18

SEAT AND SEAT BELTS 1821 LUMBAR KIT (DELUXE AND AIR SUSPENSION SEAT)

KEY

1 2 3 4

PART NO.

34H387 AT209024 34H262 AT209026 AT280583

PART NAME

QTY.

SPRING PIN KIT SPRING PIN KIT PAN

700J CRAWLER DOZER (S.N. -139435)

2 1 1 1 1

PC9473

(03-FEB-05)

SERIAL NO.

REMARKS

(INCLUDES 34H262) (LUMBAR KNOB) 5/32" X 3/4" (LUMBAR) (INCLUDES 34H387 AND AT209024)

1821-29

PN=317


1821-30 OPERATOR’S STATION

18

SEAT AND SEAT BELTS 1821 RECLINER KIT (DELUXE AND AIR SUSPENSION SEAT) TX1019530

1821-30

-UN-01MAR07

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(05-MAR-07) PN=318


1821-31 OPERATOR’S STATION

18

SEAT AND SEAT BELTS 1821 RECLINER KIT (DELUXE AND AIR SUSPENSION SEAT)

KEY

PART NO.

PART NAME

QTY.

2 3 4 5 6 7 9

M453T 19H1813 24H1136 19H1914 AT209025 37H121 AT209225

LOCK NUT CAP SCREW WASHER CAP SCREW KIT SCREW KIT

3 2 2 3 1 2 1

10

24H1287

WASHER

6

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05)

SERIAL NO.

REMARKS

5/16" X 5/8" 11/32" X 11/16" X 0.065" 1/4" X 1" (RECLINER KNOB KIT) (INCLUDES 37H121) (RECLINER KIT) (DOES NOT INCLUDE 19H1813, 24H1136, 19H1914, 24H1287 - ORDER SEPARATELY) 9/32" X 5/8" X 0.065"

1821-31

PN=319


1822-2 OPERATOR’S STATION

18

STEPS AND HANDHOLDS 1822 STEPS TP67613

1822-2

-UN-08NOV99

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=320


1822-3 OPERATOR’S STATION

18

STEPS AND HANDHOLDS 1822 STEPS

KEY

1 2 3 4 5 6 7 8

PART NO.

T177973 19M7557 24M7296 AT221937 19M7662 T177330 19M7938 AT221920

PART NAME

QTY.

PLATE CAP SCREW WASHER STEP CAP SCREW PLATE CAP SCREW STEP

700J CRAWLER DOZER (S.N. -139435)

1 2 12 1 8 1 2 1

PC9473

(03-FEB-05)

SERIAL NO.

REMARKS

(LEFT TREAD PLATE) M10 X 16 10.500 X 30 X 2.500 MM (LEFT STEP) M10 X 30 (RIGHT TREAD PLATE) M10 X 20 (RIGHT STEP)

1822-3

PN=321


1831-2 OPERATOR’S STATION

18

HEATER, HOSES AND CONTROLS 1831 ROPS AND CAB HEATER (UNDER SEAT) T206102

1831-2

-UN-12JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=322


1831-3 OPERATOR’S STATION

18

HEATER, HOSES AND CONTROLS 1831 ROPS AND CAB HEATER (UNDER SEAT)

KEY

PART NO.

PART NAME

QTY.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

AT207486 AT220753 AT224602 AT221245 19M7775 AT211192 AT221246 AT224604 AT221249 19M7775 AT221247 19M7372 AT303864 M115279

BASE HEATER TRAY GASKET KIT SCREW CORE SUPPORT WIRING HARNESS PLATE SCREW BLOWER CAP SCREW TOGGLE/ROCKER SWITCH PLUG

1 1 1 1 2 1 1 1 1 8 1 2 1 1

15

AT313707

GATHERING NUMBER

1

16 17 19

T181217 AT182200 24M7087

BRACKET RESISTOR WASHER

1 1 2

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05)

SERIAL NO.

REMARKS

(ROPS SEAT) (UNDER SEAT) (HEATER) M6 X 16, (CAB ONLY) (HEATER) (SEAT BASE ROPS HEATER) (CAB ONLY) M6 X 16 (WITH MOTOR) M5 X 16 (HEATER) (NOT ILLUSTRATED)(USED WHEN ROPS SEAT BASE HEATER IS NOT) (ROPS HEATER FIELD KIT)(PARTS ARE ALSO INCLUDED ON ROPS HEATER PLUMBING PAGE) (FOUR SPEED RESISTOR) 5.500 X 10 X 1 MM

1831-3

PN=323


1831-4 OPERATOR’S STATION

18

HEATER, HOSES AND CONTROLS 1831 ROPS HEATER PLUMBING T206103

1831-4

-UN-07JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=324


1831-5 OPERATOR’S STATION

18

HEATER, HOSES AND CONTROLS 1831 ROPS HEATER PLUMBING

KEY

PART NO.

PART NAME

QTY.

1

........

HOSE

1

2 3 4 5

T149597 RE59579 AT174697 ........

CLAMP DRAIN VALVE ELBOW FITTING HOSE

1 1 1 1

6 7 8 9 10 11

AR21837 51M7043 R123616 U13639 R44302 AT313707

CLAMP O-RING PLUG O-RING TIE BAND GATHERING NUMBER

4 3 1 1 8 1

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05)

SERIAL NO.

REMARKS

(FROM WATER PUMP TO UNDER SEAT HEATER CORE) (HEATER HOSE)(MAKE FROM TY22328 BULK MATERIAL CUT TO LENGTH 90 INCHES (2270MM))

(FROM UNDER SEAT HEATER CORE TO ENGINE BLOCK) (HEATER HOSE)(MAKE FROM TY22328 BULK MATERIAL CUT TO 70 INCHES (1754MM)) 15.300 X 2.200 MM (NOT ILLUSTRATED) (ROPS HEATER FIELD KIT)(PARTS ARE ALSO INCLUDED ON ROPS HEATER PAGE)

1831-5

PN=325


1831-6 OPERATOR’S STATION

18

HEATER, HOSES AND CONTROLS 1831 CAB HEATER PLUMBING T206104

1831-6

-UN-07JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=326


1831-7 OPERATOR’S STATION

18

HEATER, HOSES AND CONTROLS 1831 CAB HEATER PLUMBING

KEY

PART NO.

PART NAME

QTY.

1

........

BULK HOSE

1

2 3 4 5

T149597 RE59579 AT174697 ........

CLAMP DRAIN VALVE ELBOW FITTING BULK HOSE

1 1 1 1

6 7 8 9 10 11

AR21837 51M7043 R123616 U13639 R44302 ........

CLAMP O-RING PLUG O-RING TIE BAND BULK HOSE

8 1 1 1 4 1

12

........

BULK HOSE

1

13

........

HOSE GUARD

1

14

AT220542

FLOW CONTROL HYD. VALVE

1

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05)

SERIAL NO.

REMARKS

(FROM WATER PUMP TO HEATER CORE) (MAKE FROM TY22328 BULK MATERIAL CUT TO LENGTH 159 INCHES 4030MM)

(TO RIGHT REAR ENGINE BLOCK) (MAKE FROM TY22328 BULK MATERIAL CUT TO LENGTH 26 INCHES 657MM) 15.300 X 2.200 MM (NOT ILLUSTRATED) (TO UNDER SEAT HEATER CORE) (MAKE FROM TY22328 BULK MATERIAL, CUT TO LENGTH 46 INCHES 1175MM) (FROM HEATER CORE TO UNDER SEAT HEATER CORE) (MAKE FROM TY22328 BULK MATERIAL, CUT TO LENGTH 108 INCHES 2730MM) (CORDURA) (CUT FROM BULK, 950MM PARKER PS-B-33 OR PS-B-37) (WATER)

1831-7

PN=327


1831-8 OPERATOR’S STATION

18

HEATER, HOSES AND CONTROLS 1831 CAB HEATER (UPPER) TX1000206

1831-8

-UN-14NOV05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(12-APR-06) PN=328


1831-9 OPERATOR’S STATION

18

HEATER, HOSES AND CONTROLS 1831 CAB HEATER (UPPER)

KEY

PART NO.

PART NAME

QTY.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15A

AT221267 19M7775 AT207848 AT207849 19M7866 T177172 P41858 AT221263 AT220817 R44165 RE43497 AT303864 AT219733 AT315957 AT315958

COVER SCREW CORE CORE SCREW BRACKET GROMMET GASKET KIT KNOB LOCK NUT SWITCH TOGGLE/ROCKER SWITCH TEMPERATURE SWITCH FILTER ELEMENT AIR FILTER

1 24 1 1 10 1 2 1 2 2 1 1 1 1 1

15B

AT191102

AIR FILTER

2

16

AT224719 AT224721

HOUSING GASKET KIT

1 1

AT326633 19M8870 R26936 T158127 R113050 19M8669 RE57575 R33259 AT221317 T177171 RE198074 AT222736 AT221322 AT223253 AT221337 T177168 AT221266 AT221279 AT221268 AT224734 AT326632 24H1272

HOUSING SCREW GROMMET PLATE O-RING SCREW VALVE O-RING PLATE BRACKET TEMPERATURE SWITCH RESISTOR BLOWER FAN WIRING HARNESS RESISTOR PLATE RETAINER BRACKET COVER HEATER HEATER WASHER

1 4 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35

SERIAL NO.

REMARKS

(TOP) M6 X 16 (EVAPORATOR) (HEATER) M8 X 20 (LEFT TIE DOWN)

-118110 118111-

(SWITCH) 7/16", (JAM) (ROTARY) (HEATER) (HEATER CONTROL) (RECIRCULATION) (INSIDE-ABOVE REAR WINDOW) (FRESH AIR FILTER)(CONTACT GR MANUFACTURING IF YOU HAVE AN ENVIRONMENTAL CAB) (FRESH AIR FILTER)(CONTACT GR MANUFACFTURING IF YOU HAVE AN ENVIRONMENTAL CAB)

-118110 (NOT ILLUSTRATED) (UPPER HEATER DRAIN PAN FOAM) 118111M5 X 8 (EXPANSION VALVE MOUNT) M5 X 35 (THERMAL EXPANSION) (CUTOUT) (RIGHT TIE DOWN) (SWITCH FREEZE CONTROL) (NOT ILLUSTRATED) (WATER VALVE RESISTOR) (HEATER)(24V) (NOT ILLUSTRATED) (RETAINER MOTOR SUPPORT) (HEATER MOTOR) -118110 118111-

(AIR CONDITIONER BACK) (UPPER)(24V)

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(12-APR-06)

1831-9

PN=329


1832-2 OPERATOR’S STATION

18

AIR CONDITIONING SYSTEM, COMPRESSOR AND DRIVE 1832 AIR CONDITIONING T206142

1832-2

-UN-24JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=330


1832-3 OPERATOR’S STATION

18

AIR CONDITIONING SYSTEM, COMPRESSOR AND DRIVE 1832 AIR CONDITIONING

KEY

1 2 3 4 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

PART NO.

PART NAME

QTY.

33 35 39

AT315893 AT221323 19M7775 AT221298 AT223898 AT221312 AT221308 AT207545 R113050 AT315892 AT221321 R10093 AT162848 AT221320 19M7866 T27550 RE157329 AT221319 T177227 T177226 T143169 AH78237 T177228 AT303865 R26627 AT221340 T74412 T76252 24M7036 14M7273 AT221339 38H1220 H148375 R26936 ........

WIRING HARNESS SUCTION FAN SCREW AIR PLENUM BRACKET INSULATOR BRACKET CORE O-RING REFRIGERANT HOSE REFRIGERANT HOSE O-RING RECEIVER-DRYER REFRIGERANT HOSE SCREW CLIP SWITCH REFRIGERANT HOSE PLATE PLATE O-RING CLAMP BRACKET TOGGLE/ROCKER SWITCH NUT LINE CLAMP CLAMP WASHER NUT LINE ADAPTER FITTING LOCK NUT GROMMET PLUG

1 2 16 1 2 1 1 1 2 1 1 5 1 1 9 1 1 1 1 1 1 2 1 1 1 1 1 1 2 3 1 1 1 1 1

40 41

AT221324 AT227785

VAPOR CONDENSER FIELD INSTALLATION KIT

1 1

700J CRAWLER DOZER (S.N. -139435)

PC9473

(07-SEP-06)

SERIAL NO.

REMARKS

(CONDENSER) (CONDENSER) M6 X 16 (CONDENSER FANS) (CONDENSER MOUNTING END BRACKET) (CONDENSER FOAM KIT) (CONDENSER RETAINER) (CONDENSER) 0.426" X 0.070" (BULKHEAD TO CONDENSER) (HOSE DRIER) 0.301" X 0.070" (CONDENSER TO DRIER) M8 X 20 (BINARY PRESSURE SWITCH) (TO EXPANSION VALVE) 0.676" X 0.070" (RECEIVER DRIER) (AIR CONDITIONER) (ON-OFF) 7/8" (REFRIGERANT) 9 X 16 X 1.600 MM M8 (REFRIGERANT) (INCLUDES 38H1220)

(SUB T207060) ( T163309 NLA) (NOT ILLUSTRATED) (24 VOLT CONDENSER ASSEMBLY) (NOT ILLUSTRATED) (AIR CONDITIONING HOUSING KIT)(CONTAINS HOUSING AND INSTALLATION INSTRUCTIONS)

1832-3

PN=331


1832-4 OPERATOR’S STATION

18

AIR CONDITIONING SYSTEM, COMPRESSOR AND DRIVE 1832 AIR CONDITIONING PLUMBING T206236

1832-4

-UN-24JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=332


1832-5 OPERATOR’S STATION

18

AIR CONDITIONING SYSTEM, COMPRESSOR AND DRIVE 1832 AIR CONDITIONING PLUMBING

KEY

1 2 3 4 5 6 7 8 9

PART NO.

AT171107 AT207639 AT223872 AT223873 R113050 R33259 T148917 AT164903 AT164892

PART NAME

QTY.

STRUCTURAL TUBING LINE REFRIGERANT HOSE REFRIGERANT HOSE O-RING O-RING CAP FITTING HYDRAULIC CYLINDER PORT

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05)

1 1 1 1 3 3 2 1 1

SERIAL NO.

REMARKS

(REFRIGERANT) (REFRIGERANT) (LOW PRESSURE) (INCLUDES AT164903) (HIGH PRESSURE) (INCLUDES AT164892) 0.426" X 0.070" 0.551" X 0.070" (HIGH PRESSURE) (CHARGE)(LOW PRESSURE FITTING) (CHARGE)(HIGH PRESSURE FITTING)

1832-5

PN=333


1832-6 OPERATOR’S STATION

18

AIR CONDITIONING SYSTEM, COMPRESSOR AND DRIVE 1832 AIR CONDITIONING COMPRESSOR T199541

1832-6

-UN-04MAY04

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=334


1832-7 OPERATOR’S STATION

18

AIR CONDITIONING SYSTEM, COMPRESSOR AND DRIVE 1832 AIR CONDITIONING COMPRESSOR

KEY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 17

PART NO.

RE52454 24M7238 19M7407 19M8539 19M7808 R502079 RE505264 R500320 34M7189 R504192 14M7273 T78974 T188560 24M7239 19M7550 R500384 R500385

PART NAME

QTY.

COMPRESSOR WASHER CAP SCREW CAP SCREW SCREW SLEEVE PULLEY SPACER SPRING PIN BRACKET NUT CLAMP SUPPORT WASHER CAP SCREW V-BELT V-BELT

700J CRAWLER DOZER (S.N. -139435)

1 6 1 4 1 1 1 1 2 1 1 1 1 2 2 1 1

PC9473

(03-FEB-05)

SERIAL NO.

REMARKS

8.700 X 17 X 2 MM M8 X 25 M8 X 90 M10 X 65 (IDLER PULLEY) (WITH BEARING) (IDLER PULLEY) 11 X 8 MM (AC COMPRESSOR) M8 (USE WITH SUPPORT) (AC BRACKET) 10.700 X 21 X 2.500 MM M10 X 35 (POLY RIBBED) (POLY-VEE)

1832-7

PN=335


1832-8 OPERATOR’S STATION

18

AIR CONDITIONING SYSTEM, COMPRESSOR AND DRIVE 1832 AIR CONDITIONING COMPRESSOR MANIFOLD AND DUST COVER TP54000

KEY

-UN-13DEC96

PART NO.

PART NAME

QTY.

1 2 3 4 5 6

RE55423 RE52506 R115742 RE52454 AT163872 RE52508

MANIFOLD FLOW CONTROL HYD. VALVE SEAL COMPRESSOR STATOR KIT

1 1 1 1 1 1

7 8 9

R115743 AT168543 RE12363 R78057 R78059 14M7273

COVER COMPRESSOR ELECTRICAL CONNECTOR ASSY ELEC. CONNECTOR TERMINAL ELEC. CONNECTOR SEAL NUT

1 1 1 2 2 1

1832-8

SERIAL NO.

REMARKS

(MANIFOLD) COMPRESSOR CLUTCH AND PULLEY (INCLUDES CLUTCH, HUB SCREW, CLUTCH HUB, SNAP RING (STATOR), SNAP RING (ROTOR), (6) R77390 FRONT COVER SCREWS, (2) .5 MM SHIMS, (2) .3MM SHIMS, (2) .1 MM SHIMS AND PULLEY WITH BEARING) (DUST) (24V)(REAR PORT) (NOT ILLUSTRATED) (NOT ILLUSTRATED) (NOT ILLUSTRATED) M8, (NOT ILLUSTRATED)

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=336


1832-9 OPERATOR’S STATION

18

AIR CONDITIONING SYSTEM, COMPRESSOR AND DRIVE 1832 AIR CONDITIONER COMPRESSOR SHAFT SEAL KIT TP34246

KEY

1

-UN-01JAN94

PART NO.

RE52509

PART NAME

QTY.

SEAL KIT

700J CRAWLER DOZER (S.N. -139435)

1

PC9473

(03-FEB-05)

SERIAL NO.

REMARKS

(SHAFT SEAL)

1832-9

PN=337


1832-10 OPERATOR’S STATION

18

AIR CONDITIONING SYSTEM, COMPRESSOR AND DRIVE 1832 COMPRESSOR HARDWARE KIT TP53974

KEY

1

-UN-12OCT96

PART NO.

RE52507

1832-10

PART NAME

KIT

QTY.

1

SERIAL NO.

REMARKS

(HARDWARE)

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=338


1832-11 OPERATOR’S STATION

18

AIR CONDITIONING SYSTEM, COMPRESSOR AND DRIVE 1832 MEMORANDA

700J CRAWLER DOZER (S.N. -139435)

PC9473

(04-AUG-05)

1832-11

PN=339


1911-2 SHEET METAL AND STYLING

19

HOOD AND HOOD SUPPORTS 1911 HOOD T206321

1911-2

-UN-12JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(13-APR-07) PN=340


1911-3 SHEET METAL AND STYLING

19

HOOD AND HOOD SUPPORTS 1911 HOOD

KEY

1

PART NO.

PART NAME

QTY.

2

T228553 T228554 AT303698

EXHAUST PIPE EXHAUST PIPE DOOR

1 1 1

5 6 7 8 9 10 11 12 13

24M7296 19M7402 19M8183 24M7239 AT312468 14M7274 AT305203 AT162114 M68997

WASHER CAP SCREW CAP SCREW WASHER CLAMP NUT HOOD HINGE BUMPER

9 9 1 2 1 1 1 1 2

700J CRAWLER DOZER (S.N. -139435)

PC9473

(13-APR-07)

SERIAL NO.

REMARKS

(SUB FOR T178497) (BLACK EXHAUST STACK) (SUB FOR T178498) (CHROME EXHAUST STACK) (SERVICE DOOR) (INCLUDES (2) 14M7273, (2) 19M7932 AND (2) 24M7238) 10.500 X 30 X 2.500 MM M10 X 25 M10 X 90 10.700 X 21 X 2.500 MM (EXHAUST) M10 (SERVICE DOOR) (RUBBER)

1911-3

PN=341


1911-4 SHEET METAL AND STYLING

19

HOOD AND HOOD SUPPORTS 1911 HOOD SUPPORT T165774

1911-4

-UN-04MAR03

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=342


1911-5 SHEET METAL AND STYLING

19

HOOD AND HOOD SUPPORTS 1911 HOOD SUPPORT

KEY

1 2 3 4

PART NO.

AT228420 24M7296 19M8600 T180726

PART NAME

QTY.

SUPPORT WASHER CAP SCREW SEAL

700J CRAWLER DOZER (S.N. -139435)

1 8 8 1

PC9473

(03-FEB-05)

SERIAL NO.

REMARKS

(HOOD) 10.500 X 30 X 2.500 MM M10 X 50 (COWL)

1911-5

PN=343


1912-2 SHEET METAL AND STYLING

19

ENGINE SIDESHIELDS 1912 ENGINE SIDE SHIELDS T208381

1912-2

-UN-18FEB05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(04-AUG-05) PN=344


1912-3 SHEET METAL AND STYLING

19

ENGINE SIDESHIELDS 1912 ENGINE SIDE SHIELDS

KEY

PART NO.

PART NAME

QTY.

1 2 3 4 5 6 7 10

14M7167 19M7402 19M7658 24H1301 24M7296 AT223921 AT314034 AT225885 M64720

LOCK NUT CAP SCREW CAP SCREW WASHER WASHER SHIELD SHIELD LATCH RIVET

4 10 4 4 18 1 1 1 4

11 13 14

AT209110 T175361 T148643

HINGE BUMPER GUIDE

2 2 8

700J CRAWLER DOZER (S.N. -139435)

PC9473

(05-MAR-07)

SERIAL NO.

REMARKS

M10 M10 X 25 M10 X 50 13/32" X 9/16" X 0.065" 10.500 X 30 X 2.500 MM (LEFT HAND SIDE) (RIGHT HAND SIDE) (DOOR) 4.775 MM, (USE WITH AT225885) (SUB FOR M68628, THIS APPLICATION) (SERVICE DOOR) (RUBBER) (NYLON)

1912-3

PN=345


1921-2 SHEET METAL AND STYLING

19

GRILLE AND GRILLE HOUSING 1921 GRILLE HOUSING AND GRILLE T206333

1921-2

-UN-19JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=346


1921-3 SHEET METAL AND STYLING

19

GRILLE AND GRILLE HOUSING 1921 GRILLE HOUSING AND GRILLE

KEY

1 2 3 4 5 6 7 8 9 10 12 14 15 17 18 19 20

PART NO.

........ AT222807 T179584 24M7296 19M7662 19M7496 24M7180 14M7274 AT221254 AT209110 AT222536 H85233 T180042 19M8183 28H3472 AT222900 19M7402 19M7550

PART NAME

QTY.

PLATE GRILLE PLATE WASHER CAP SCREW CAP SCREW WASHER NUT HOUSING HINGE LATCH RIVET HOSE GUARD CAP SCREW SPACER SHIELD CAP SCREW CAP SCREW

700J CRAWLER DOZER (S.N. -139435)

1 1 1 17 8 4 4 4 1 1 1 2 1 1 1 1 4 2

PC9473

(04-AUG-05)

SERIAL NO.

REMARKS

(NOT AVAILABLE) (SUB FOR T176201) (GREY) LOWER HOSE GUARD 10.500 X 30 X 2.500 MM M10 X 30 M12 X 45 13 X 37 X 3 MM M10 (GRILLE) (RADIATOR COVER PLATE) (SPRING PIN) 3/16", (USE WITH AT222536) (UPPER HOSE GUARD) M10 X 90 0.493" X 0.675" X 2-1/8" M10 X 25 M10 X 35

1921-3

PN=347


1921-4 SHEET METAL AND STYLING

19

GRILLE AND GRILLE HOUSING 1921 HEAVY DUTY GRILLE T206336

1921-4

-UN-24JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=348


1921-5 SHEET METAL AND STYLING

19

GRILLE AND GRILLE HOUSING 1921 HEAVY DUTY GRILLE

KEY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

PART NO.

AT222443 24M7296 19M7662 19M7496 AT222484 AT223939 19M7403 19M8003 14M7517 AT222540 T151427 T118385 AT222541 19M7638 19M7572 19M8093 24M7239 19M7875 14M7296 28H3379 24M7180 24H1351 19M7550 24M7047

PART NAME

QTY.

GRILLE WASHER CAP SCREW CAP SCREW GUARD HOSE GUARD CAP SCREW CAP SCREW LOCK NUT HOSE GUARD BUSHING CLAMP HOSE GUARD CAP SCREW CAP SCREW CAP SCREW WASHER CAP SCREW FLANGE NUT SPACER WASHER WASHER CAP SCREW WASHER

700J CRAWLER DOZER (S.N. -139435)

1 14 6 2 1 1 1 1 4 1 1 1 1 1 1 1 4 2 1 2 2 1 3 1

PC9473

(03-FEB-05)

SERIAL NO.

REMARKS

(EXTREME DUTY GRILLE) 10.500 X 30 X 2.500 MM M10 X 30 M12 X 45 (EXTREME DUTY BOTTOM GUARD) (TOP HOSE GUARD) M12 X 35 M10 X 140 M10 (EXTREME DUTY C-FRAME GUARD) 17.385 X 30.163 X 75 MM, (SPACER) (EXTREME DUTY C-FRAME GUARD) M10 X 130 M10 X 45 M10 X 100 10.700 X 21 X 2.500 MM M10 X 70 M10 0.493" X 0.675" X 1-9/16" 13 X 37 X 3 MM 9/16" X 1-1/2" X 0.164" M10 X 35 13 X 24 X 2.500 MM

1921-5

PN=349


1927-2 SHEET METAL AND STYLING

19

FENDERS 1927 CANOPY CORNER COVERS T135591

1927-2

-UN-17NOV00

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=350


1927-3 SHEET METAL AND STYLING

19

FENDERS 1927 CANOPY CORNER COVERS

KEY

1 2 3 4 5

PART NO.

19M7402 24M7296 M85537 AT224007 T179549

PART NAME

QTY.

CAP SCREW WASHER WASHER COVER PLATE

700J CRAWLER DOZER (S.N. -139435)

12 8 4 1 1

PC9473

(03-FEB-05)

SERIAL NO.

REMARKS

M10 X 25 10.500 X 30 X 2.500 MM 0.406" X 2" X 0.188" (LEFT HAND SIDE COVER WITH HANDLE) (RIGHT HAND SIDE ROPS COVER)

1927-3

PN=351


1927-4 SHEET METAL AND STYLING

19

FENDERS 1927 CAB CORNER COVERS TP67731

1927-4

-UN-16MAY00

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=352


1927-5 SHEET METAL AND STYLING

19

FENDERS 1927 CAB CORNER COVERS

KEY

1 2 3 4 5 6

PART NO.

19M7402 24M7296 AT224007 T179528 M85537 T176444

PART NAME

QTY.

CAP SCREW WASHER COVER PLATE WASHER PLUG

700J CRAWLER DOZER (S.N. -139435)

11 7 1 1 4 1

PC9473

(03-FEB-05)

SERIAL NO.

REMARKS

M10 X 25 10.500 X 30 X 2.500 MM (LEFT HAND COVER WITH HANDLE) (RIGHT HAND COVER) 0.406" X 2" X 0.188"

1927-5

PN=353


2001-2 SAFETY, CONVENIENCE AND MISCELLANEOUS

20

RADIO 2001 RADIO TP67730

2001-2

-UN-15MAY00

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=354


2001-3 SAFETY, CONVENIENCE AND MISCELLANEOUS

20

RADIO 2001 RADIO

KEY

PART NO.

PART NAME

QTY.

1 2 3 4 5

RE190139 24M7139 T142434 T179761 AT224894 AT224893

RADIO WASHER PIN BRACKET CONVERTER CONVERTER

1 1 1 1 1 1

6 7 8 9 10 11 12 13

37M7059 AT222705 AT222831 AT208495 T176820 BP13712 19H1227 AT220750

SCREW RADIO SPEAKER WRG HARNESS SPEAKER ANTENNA GROMMET NUT CAP SCREW GATHERING NUMBER

2 1 2 1 1 8 8 1

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05)

SERIAL NO.

REMARKS

(AM/FM/WB) 6.400 X 18 X 1.600 MM (RADIO MOUNTING) (10AMP)(24V TO 12V) (NEEDED WITH RADIO) (5AMP)(24V TO 12V) (USED WHEN NOT EQUIPPED WITH RADIO) M5 X 12 (DELCO 4")(4 OHM) (WITH CABLE) (U-NUT) 1/4" X 1/2" (SPECIAL EQUIPMENT FIELD INSTALLED RADIO, SPEAKERS, CONVERTER, ANTENNA, AND MISCELLANEOUS)

2001-3

PN=355


2004-2 SAFETY, CONVENIENCE AND MISCELLANEOUS

20

HORN AND REVERSE ALARM 2004 HORN T209320

2004-2

-UN-11MAR05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(05-MAR-07) PN=356


2004-3 SAFETY, CONVENIENCE AND MISCELLANEOUS

20

HORN AND REVERSE ALARM 2004 HORN

KEY

1 2 3 4 5 6

PART NO.

AT226282 24M7095 19M7881 ........ ........ ........

PART NAME

QTY.

HORN WASHER SCREW NUT SCREW ANGLE

700J CRAWLER DOZER (S.N. -139435)

1 1 1 1 1 1

PC9473

(05-MAR-07)

SERIAL NO.

REMARKS

8.400 X 15 X 1.600 MM M8 X 20, (24V) (NOT SERVICED) (SUB AT226282) (NOT IN THIS APPLICATION) (NOT IN THIS APPLICATION)

2004-3

PN=357


2004-4 SAFETY, CONVENIENCE AND MISCELLANEOUS

20

HORN AND REVERSE ALARM 2004 BACKUP ALARM TP67596

2004-4

-UN-09NOV99

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=358


2004-5 SAFETY, CONVENIENCE AND MISCELLANEOUS

20

HORN AND REVERSE ALARM 2004 BACKUP ALARM

KEY

1 2 3

PART NO.

19M7932 24M7238 AT120461

PART NAME

QTY.

CAP SCREW WASHER TRAVEL WARNING ALARM

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05)

2 2 1

SERIAL NO.

REMARKS

M8 X 16 8.700 X 17 X 2 MM (BACKUP)

2004-5

PN=359


2006-2 SAFETY, CONVENIENCE AND MISCELLANEOUS

20

CIGAR LIGHTER 2006 CIGAR LIGHTER AND/OR POWER ACCESSORY T206362

2006-2

-UN-13JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=360


2006-3 SAFETY, CONVENIENCE AND MISCELLANEOUS

20

CIGAR LIGHTER 2006 CIGAR LIGHTER AND/OR POWER ACCESSORY

KEY

1 2 3

PART NO.

37M7059 AT224893 GY20126

PART NAME

QTY.

SCREW CONVERTER SOCKET OUTLET

700J CRAWLER DOZER (S.N. -139435)

PC9473

2 1 1

(03-FEB-05)

SERIAL NO.

REMARKS

M5 X 12 (24V TO 12V POWER CONVERTER)(5 AMP) (OUTLET WITH COVER)(12V)

2006-3

PN=361


2161-2 VEHICLE MAIN HYDRAULIC SYSTEM

21

HYDRAULIC PUMPS AND DRIVES 2161 STANDARD HYDRAULIC PUMP T200165

2161-2

-UN-19MAY04

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=362


2161-3 VEHICLE MAIN HYDRAULIC SYSTEM

21

HYDRAULIC PUMPS AND DRIVES 2161 STANDARD HYDRAULIC PUMP

KEY

1 4 5 6

PART NO.

AT224356 AT224352 T174515 T29342 19H2993

PART NAME

QTY.

HYDRAULIC PUMP GASKET KIT COUPLING WASHER CAP SCREW

700J CRAWLER DOZER (S.N. -139435)

PC9473

1 1 1 4 4

(03-FEB-05)

SERIAL NO.

REMARKS

(ALSO ORDER R99702) (NOT ILLUSTRATED) (SPLINE ADAPTER) 17/32" X 1-1/4" X 0.180", (SPECIAL HARDWARE) 1/2" X 1-1/2"

2161-3

PN=363


2161-4 VEHICLE MAIN HYDRAULIC SYSTEM

21

HYDRAULIC PUMPS AND DRIVES 2161 HYDRAULIC PUMP WITH DRIVE THROUGH SHAFT T206346

2161-4

-UN-13JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(07-SEP-06) PN=364


2161-5 VEHICLE MAIN HYDRAULIC SYSTEM

21

HYDRAULIC PUMPS AND DRIVES 2161 HYDRAULIC PUMP WITH DRIVE THROUGH SHAFT

KEY

1 2 3 4 7

PART NO.

19H2993 T29342 AT224354 AT224351 14H1039 T180651

PART NAME

QTY.

CAP SCREW WASHER HYDRAULIC PUMP GASKET KIT NUT COVER

700J CRAWLER DOZER (S.N. -139435)

PC9473

4 4 1 1 2 1

(07-SEP-06)

SERIAL NO.

REMARKS

1/2" X 1-1/2" 17/32" X 1-1/4" X 0.180", (SPECIAL HARDWARE) (WITH DRIVE THRU SHAFT) (ALSO ORDER R99702) (NOT ILLUSTRATED)(PUMP REPAIR KIT) 5/8" (PTO SHAFT COVER)

2161-5

PN=365


2163-2 VEHICLE MAIN HYDRAULIC SYSTEM

21

HYDRAULIC LINES AND HOSES 2163 SUCTION HOSE T207330

2163-2

-UN-26JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=366


2163-3 VEHICLE MAIN HYDRAULIC SYSTEM

21

HYDRAULIC LINES AND HOSES 2163 SUCTION HOSE

KEY

1 2

PART NO.

TY22485 T154809

PART NAME

QTY.

HOSE CLAMP SUCTION HOSE

700J CRAWLER DOZER (S.N. -139435)

PC9473

3 1

(13-APR-07)

SERIAL NO.

REMARKS

(SUB FOR RE52034) (FROM HYDRAULIC TANK TO HYDRAULIC PUMP)

2163-3

PN=367


2163-4 VEHICLE MAIN HYDRAULIC SYSTEM

21

HYDRAULIC LINES AND HOSES 2163 PRESSURE HOSE T207332

2163-4

-UN-26JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=368


2163-5 VEHICLE MAIN HYDRAULIC SYSTEM

21

HYDRAULIC LINES AND HOSES 2163 PRESSURE HOSE

KEY

PART NO.

PART NAME

QTY.

1

AT220311

HYDRAULIC HOSE - FABRICATE

1

2 3 4 5

T78313 H61354 12H304 19H3239

O-RING FLANGE FITTING LOCK WASHER CAP SCREW

1 2 4 4

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05)

SERIAL NO.

REMARKS

(FROM HYDRAULIC CONTROL VALVE TO HYDRAULIC PUMP) 1.296" X 0.139" (CLAMP HALF) 3/8" 3/8" X 1-1/4"

2163-5

PN=369


2163-6 VEHICLE MAIN HYDRAULIC SYSTEM

21

HYDRAULIC LINES AND HOSES 2163 HYDRAULIC FILTER HOSE T206349

2163-6

-UN-13JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=370


2163-7 VEHICLE MAIN HYDRAULIC SYSTEM

21

HYDRAULIC LINES AND HOSES 2163 HYDRAULIC FILTER HOSE

KEY

2 3 4 5 6 7 8 9 10 11 12 13

PART NO.

T211010 T76938 38H1179 U12547 38H1096 T77932 38H1214 R26906 AT228068 AT301792 AT301982 T149597

PART NAME

QTY.

TEE FITTING O-RING ADAPTER FITTING O-RING ELBOW FITTING O-RING ADAPTER FITTING O-RING HYDRAULIC HOSE - FABRICATE HYDRAULIC HOSE - FABRICATE HYDRAULIC HOSE - FABRICATE CLAMP

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05)

1 3 1 1 1 3 2 2 1 1 1 1

SERIAL NO.

REMARKS

0.926" X 0.070" 0.924" X 0.116" 0.614" X 0.070" 0.755" X 0.097" 1" X 173-1/4" X 1-7/16" 1-7/16" X 16" X 1-7/16", (VALVE TO FILTER) 1" X 129-1/2" X 1-7/16"

2163-7

PN=371


2163-8 VEHICLE MAIN HYDRAULIC SYSTEM

21

HYDRAULIC LINES AND HOSES 2163 SUCTION HOSE DRIVE THRU PUMP T207331

2163-8

-UN-27JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=372


2163-9 VEHICLE MAIN HYDRAULIC SYSTEM

21

HYDRAULIC LINES AND HOSES 2163 SUCTION HOSE DRIVE THRU PUMP

KEY

1 2

PART NO.

T154809 AT54837

PART NAME

QTY.

SUCTION HOSE CLAMP

700J CRAWLER DOZER (S.N. -139435)

PC9473

1 3

(03-FEB-05)

SERIAL NO.

REMARKS

(FROM HYDRAULIC RESERVOIR TO HYDRAULIC PUMP) (T-BOLT)(HEAVY DUTY)

2163-9

PN=373


2163-10 VEHICLE MAIN HYDRAULIC SYSTEM

21

HYDRAULIC LINES AND HOSES 2163 ENVIRONMENTAL DRAIN T206352

2163-10

-UN-14JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=374


2163-11 VEHICLE MAIN HYDRAULIC SYSTEM

21

HYDRAULIC LINES AND HOSES 2163 ENVIRONMENTAL DRAIN

KEY

PART NO.

PART NAME

QTY.

1

AT152180

DRAIN VALVE

3

3

........

HOSE

1

4 5 6 7 8

AR21837 38H1416 38H1012 R26906 T77857

CLAMP FITTING ELBOW FITTING O-RING O-RING

1 1 1 4 1

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05)

SERIAL NO.

REMARKS

(HYDRAULIC AND TRANSMISSION RESERVOIR, ENGINE OIL) (ENGINE DRAIN HOSE) (MAKE FROM T60811, CUT TO LENGTH 5 FEET) (HOSE) 0.755" X 0.097" 0.489" X 0.070"

2163-11

PN=375


2164-2 VEHICLE MAIN HYDRAULIC SYSTEM

21

HYDRAULIC RESERVOIR, FILTER AND COOLER 2164 HYDRAULIC RESERVOIR T206353

2164-2

-UN-26JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=376


2164-3 VEHICLE MAIN HYDRAULIC SYSTEM

21

HYDRAULIC RESERVOIR, FILTER AND COOLER 2164 HYDRAULIC RESERVOIR

KEY

PART NO.

PART NAME

QTY.

1 2 3 4 5 6 7 8 10 11 12

R26773 T170935 AT209110 24M7296 19M7938 AT220567 AT211118 AT186172 AT227279 14M7274 AT307278

O-RING DRAIN PLUG HINGE WASHER CAP SCREW DOOR LOCK LATCH LEVEL GAUGE NUT COVER

1 1 2 5 4 1 1 1 1 1 1

13 14 15 16 17 18 19 20 21 22 24 25 26

AT307292 AT223468 19M7417 24M7241 T77857 R26906 38H1012 38H1416 T197300 T175361 M68628 T180050 AT228531

GASKET KIT COVER CAP SCREW WASHER O-RING O-RING ELBOW FITTING FITTING LABEL BUMPER RIVET LABEL HYDRAULIC RESERVOIR

1 1 4 4 1 1 1 1 1 1 4 2 1

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05)

SERIAL NO.

REMARKS

1.720" X 0.118" (FILLER PLUG) 10.500 X 30 X 2.500 MM M10 X 20 (RIGHT HYDRAULIC RESERVOIR DOOR) (HYDRAULIC RESERVOIR SIGHT GAUGE) M10 (CLEAN OUT COVER) (INCLUDES GASKET AND HARDWARE, AT307292) (CLEAN OUT COVER) (INCLUDED WITH AT307278) (TANK ACCESS COVER PLATE) M16 X 65 17 X 34 X 4 MM 0.489" X 0.070" 0.755" X 0.097" (SIGHT GAUGE LABEL) (RUBBER) 3/16" (24V LABEL)

2164-3

PN=377


2164-4 VEHICLE MAIN HYDRAULIC SYSTEM

21

HYDRAULIC RESERVOIR, FILTER AND COOLER 2164 HYDRAULIC FILTER TP67735

-UN-24MAY00

THIS PARTS LISTING IS CONTINUED

2164-4

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=378


2164-5 VEHICLE MAIN HYDRAULIC SYSTEM

21

HYDRAULIC RESERVOIR, FILTER AND COOLER 2164 HYDRAULIC FILTER

KEY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

PART NO.

19M7402 24M7239 R29936 38H1037 T76938 T175002 R28782 U44115 14H778 12M7060 R26448 38H1164 AT302009 24M7296 14M7274 AH128450 AT221680

PART NAME

QTY.

CAP SCREW WASHER O-RING ELBOW FITTING O-RING HYDRAULIC FILTER O-RING FITTING PLUG NUT WASHER O-RING ADAPTER FITTING BRACKET WASHER NUT PUSH SWITCH FILTER HEAD

700J CRAWLER DOZER (S.N. -139435)

PC9473

4 8 2 1 2 1 1 1 2 1 1 1 1 2 2 1 1

(03-FEB-05)

SERIAL NO.

REMARKS

M10 X 25 10.700 X 21 X 2.500 MM 1.171" X 0.116" 0.926" X 0.070" (4 INCH) 0.351" X 0.072" 0.190" 5.300 MM 0.468" X 5/64" 10.500 X 30 X 2.500 MM M10 (RESTRICTION INDICATOR) (4" FILTER)

2164-5

PN=379


3201-2 DOZERS

32

BLADE 3201 BLADE T210159

3201-2

-UN-14APR05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(12-APR-06) PN=380


3201-3 DOZERS

32

BLADE 3201 BLADE

KEY

PART NO.

PART NAME

QTY.

1 2 3 4

19M7787 T126814 T177000 T180374

SCREW BUSHING RETAINER PIN FASTENER

3 4 3 1

5 6

T208700 T223519

PIN FASTENER END BIT

1 1

T223520

END BIT

1

AT341153

DOZER BLADE

1

AT308055

DOZER BLADE

1

T216870 T217919 T217916 T176988 19M8639 R94361 T177108 T177209 T177111 JD7759 14H1058 T10510 T70286 T224178

LABEL LABEL LABEL BUSHING CAP SCREW WASHER RETAINER WASHER SOCKET LUBRICATION FITTING NUT WASHER BOLT CUTTING EDGE

1 1 1 2 6 6 2 12 1 1 21 21 21 1

T224179

CUTTING EDGE

1

T212049 T212047 T176360

END BIT END BIT PIN

1 1 2

7

8 9 10 11 12 13 14 15 16 17 18

19 20

700J CRAWLER DOZER (S.N. -139435)

PC9473

(13-APR-07)

SERIAL NO.

REMARKS

M12 X 20 51.250 X 60.325 X 10.500 MM (PIN RETAINER) (USE WITH TILT CYLINDER) (UPPER LEFT POSITION ON BACK OF BLADE) (USE WITH PITCH JACK) (RIGHTHAND) (STRAIGHT END BIT) (SUB FOR T207993) (LEFTHAND) (STRAIGHT END BIT) (SUB FOR T207994) (SUB FOR AT310723) (CONVENIENCE ASSEMBLY) (120 INCH STANDARD BLADE) (CONVENIENCE ASSEMBLY) (132 INCH LOW GROUND PRESSURE BLADE) (ENGLISH TORQUE AND SHIM DECAL) (SPANISH TORQUE AND SHIM DECAL) (FRENCH TORQUE AND SHIM DECAL) (USED ON TILT CYLINDER) M20 X 70 (BALL RETAINER)

3/4" (DOME HEAD PLOW BOLT) (SUB FOR T175278) (120 INCH CUTTING EDGE)(LT, XLT) (SUB FOR T176000) (132 INCH CUTTING EDGE)(LGP) (RIGHTHAND) (CUPPED ENDBIT) (HD) (LEFTHAND) (CUPPED ENDBIT) (HD) (USE WITH ANGLE CYLINDERS)

3201-3

PN=381


3215-2 DOZERS

32

CONTROLS LINKAGE 3215 HYDRAULIC CONTROLS TX1013837

3215-2

-UN-20OCT06

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(05-MAR-07) PN=382


3215-3 DOZERS

32

CONTROLS LINKAGE 3215 HYDRAULIC CONTROLS

KEY

1 2 3 4 5 6 7 8 9 10 11 13 14 17 18 19 20 21 22 24 27 28 29 30 31 32 33 34 39

PART NO.

AT223278 14M7275 AT220759 R11151 AT210265 AT221783 24M7296 AT221200 AA34134 T177506 AT56822 14H774 AT211316 19M7863 M68954 T177138 14H882 AT48548 19M8499 24M7096 AT112928 19H2309 T178362 AT223375 T133674 AT220322 24H1821 M43940 24M7044 T223467

PART NAME

QTY.

HANDLE NUT SHAFT LOCK NUT BALL BEARING TIE ROD ASSEMBLY WASHER BELLCRANK BALL BEARING STRAP BALL JOINT NUT CONTROL SCREW LOCK NUT EYEBOLT NUT BALL JOINT CAP SCREW WASHER BALL JOINT CAP SCREW GROMMET BOOT SELF-LOCKING SCREW CONTROL WASHER SNAP RING WASHER STRAP

1 1 1 3 2 1 1 1 2 2 3 3 1 4 5 1 1 1 1 4 2 2 2 1 4 1 4 1 1 1

700J CRAWLER DOZER (S.N. -139435)

PC9473

(05-MAR-07)

SERIAL NO.

REMARKS

M12 (WITH ARM) 5/16" (SEALED) (DOUBLE) 10.500 X 30 X 2.500 MM (INCLUDES (2) AA34134) (LINK) 3/8" (HYDRAULIC CONTROL U-JOINT REPAIR KIT) M6 X 25 3/8" 5/16" M10 X 60 10.500 X 18 X 1.600 MM (RIGHT HAND THREAD) 3/8" X 1-1/4" (PLUG) (HYDRAULIC CONTROL BOOT) M6 X 16 (U-JOINT) 9/32" X 47/64" X 1/16" 13 X 20 X 2 MM

3215-3

PN=383


3243-2 DOZERS

32

MOVEABLE FRAME 3243 C-FRAME T206415

3243-2

-UN-21JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=384


3243-3 DOZERS

32

MOVEABLE FRAME 3243 C-FRAME

KEY

1 3 4 5 6 7 8 9 10 11 12 13 14 15 17 18 19 20 21 22 23 24 25 27

28 29 30 31 32 33 34 35 36 37 38

PART NO.

PART NAME

QTY.

19M8543 T101172 JD7759 40M1873 AT128774 34M7073 19M8011 24M7240 T177000 T176360 T176988 T179350 AT221387 AT221388 19M7403 24H1790 28H3418 AT221145 T177030 19M7950 T177028 T102171 T102136 T177029 AT224949

CAP SCREW WASHER LUBRICATION FITTING SNAP RING SELF-ALIGNING BUSHING SPRING PIN CAP SCREW WASHER STRAP PIN BUSHING BALL STEP STEP CAP SCREW WASHER WASHER PIN PIN CAP SCREW STRAP WASHER SEAL BUSHING HOSE

2 2 4 4 2 2 5 3 3 3 6 1 1 1 3 2 2 2 2 4 2 4 4 2 2

AT173254

HYDRAULIC HOSE

2

E12379 JD7797 T208700 AT308737 T176696 AT308736 M117096 T177673 T178166 AT310614 AT310615 AT308735

NUT LUBRICATION FITTING PIN FASTENER LINK END TURNBUCKLE LINK END PIN FASTENER SPRING LOCKING PIN COVER FRAME FRAME LINK

2 2 1 1 1 1 1 1 1 1 1 1

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05)

SERIAL NO.

REMARKS

M20 X 30 20.675 X 70 X 6 MM

10 X 65 MM M12 X 30 13 X 25 X 3 MM (FLAG PIN) 49.940 X 153.500 MM (PIVOT) (CONVENIENCE ASSEMBLY) (RIGHT STEP) (CONVENIENCE ASSEMBLY) (LEFT STEP) M12 X 35 17/32" X 1-1/2" X 0.164" 0.546" X 0.840" X 5/16" (LIFT CYLINDER) (C-FRAME) M20 X 45 (C-FRAME FLAG PIN) 66.500 X 108 X 3 MM (PIN) (LUBE HOSE)(WITH STANDARD C-FRAME) (INCLUDES JD7797) (LUBE HOSE)(WITH LOW GROUND PRESSURE C-FRAME) (INCLUDES JD7797) 1/8" (PITCH) (LEFT HAND) (RIGHT HAND) (PITCH LINK) (CONVENIENCE ASSEMBLY) (STANDARD) (CONVENIENCE ASSEMBLY) (LOW GROUND PRESSURE) (PITCH LINK)

3243-3

PN=385


3262-2 DOZERS

32

CONTROL VALVES 3262 HYDRAULIC CONTROL VALVE T206450

3262-2

-UN-01FEB05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=386


3262-3 DOZERS

32

CONTROL VALVES 3262 HYDRAULIC CONTROL VALVE

KEY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 21 22

PART NO.

PART NAME

QTY.

48

AT221851 14H865 14H807 R36636 R29936 T118685 AT221848 24M7047 19M7493 U12547 38H1163 T77858 T77857 T77932 38H1175 38H1329 19H3554 T118808 T177849 T81540 T178477 T178478 T177847 T121239 AT169373 T76938 38H1164 R27175 T174722 T81538 T81539 AT280406 21H1352 AT322180 AT314538 AT224726

TIE ROD ASSEMBLY NUT NUT FITTING PLUG O-RING O-RING VALVE STACK WASHER CAP SCREW O-RING ADAPTER FITTING O-RING O-RING O-RING ADAPTER FITTING ADAPTER FITTING SCREW CAP EXTENSION SPRING RETAINER SPACER SPACER PLATE SPRING CHECK VALVE O-RING ADAPTER FITTING DRAIN PLUG EXHAUST VALVE POPPET SPRING SEAL KIT SCREW PRESSURE RELIEF VALVE SEAL KIT HYD ACTUATED CONTROL VALVE

1 2 4 1 2 4 1 3 3 9 1 1 4 2 4 2 2 1 1 2 1 1 5 1 1 1 1 2 1 1 1 1 2 1 1 1

49

AT224725

HYD ACTUATED CONTROL VALVE

1

50 52

AT222384 AT224724

SPRING ASSEMBLY HYD ACTUATED CONTROL VALVE

1 1

54

AT224729

VALVE STACK

1

AT224730

VALVE STACK

1

23 31 33 36 37 39 40 41 42 45 46 47

700J CRAWLER DOZER (S.N. -139435)

PC9473

(04-AUG-05)

SERIAL NO.

REMARKS

(THREE SECTION) 1/2" 7/16" 1.171" X 0.116" 3-31/64" X 0.139" (INLET ASSEMBLY) 13 X 24 X 2.500 MM M12 X 40 0.924" X 0.116" (NOT INCLUDED WITH COMPLETE VALVE) 0.739" X 0.070" 0.489" X 0.070" 0.614" X 0.070" (NOT INCLUDED WITH COMPLETE VALVE) (NOT INCLUDED WITH COMPLETE VALVE) 1/4" X 0.880" (SPOOL END CAP) (SPRING SEAT) (WITH ANGLE SECTION) (WITH TILT SECTION) (SEAL) (RETURN) (ANTI-CAV VALVE) 0.926" X 0.070" (NOT INCLUDED WITH COMPLETE VALVE)

(LOAD CHECK SPRING) (SPOOL SEAL KIT) 1/4" X 3/8" (SUB FOR AT221849) (RELIEF VALVE SEAL KIT) (TILT SECTION) (INCLUDES SPRING ASSEMBLY AND SEALS) (LIFT SECTION) (INCLUDES SPRING ASSEMBLY AND SEALS) (FLOAT POSITIONER) (ANGLE SECTION) (INCLUDES SPRING ASSEMBLY AND SEALS) (CONVENIENCE ASSEMBLY) (THREE SECTION VALVE) (DOES NOT INCLUDE ADAPTERS 11,15,16 OR 37) (INCLUDES AT280406) (CONVENIENCE ASSEMBLY) (NOT ILLUSTRATED) (FOUR SECTION VALVE) (INCLUDES AUXILIARY SECTION)(DOES NOT INCLUDE ADAPTERS 11,15,16 OR 37) (INCLUDES AT280406)

3262-3

PN=387


3262-4 DOZERS

32

CONTROL VALVES 3262 AUXILIARY VALVE WITH LINKAGE (FOURTH FUNCTION) T206456

3262-4

-UN-26JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=388


3262-5 DOZERS

32

CONTROL VALVES 3262 AUXILIARY VALVE WITH LINKAGE (FOURTH FUNCTION)

KEY

1 3 4 5 6 9 10 11 12 13 14 18 19 21 22 23 25 26 28 29 30 31

32 33 34 35 37 38 39

40

PART NO.

PART NAME

QTY.

T71570 AT140287 R11151 19M8499 24M7096 14H732 M80373 11M7081 R65563 21H1352 T177847 14H865 14H807 T118685 T81539 T81538 T81540 T187884 T118808 19H3554 T183756 AT83174 AT165736

GRIP BOOT LOCK NUT CAP SCREW WASHER NUT YOKE COTTER PIN PIN FASTENER SCREW PLATE NUT NUT O-RING SPRING POPPET RETAINER SPRING CAP SCREW SEAL FITTING PLUG PRESSURE RELIEF VALVE

1 1 1 1 2 1 1 1 1 2 2 2 4 1 1 1 2 1 1 2 2 2 AR

AT171403

PRESSURE RELIEF VALVE

AR

19M7662 14M7517 14H882 AT48548 AT221256 AA34134 AT221852 AT224727 AT224728

CAP SCREW LOCK NUT NUT BALL JOINT CONTROL BALL BEARING TIE ROD ASSEMBLY SPOOL VALVE SPOOL VALVE

2 1 1 1 1 2 1 1 1

AT222384

SPRING ASSEMBLY

1

AT220860

HYD ACTUATED CONTROL VALVE

1

700J CRAWLER DOZER (S.N. -139435)

PC9473

(04-AUG-05)

SERIAL NO.

REMARKS

5/16" M10 X 60 10.500 X 18 X 1.600 MM 3/8" (ADJUSTABLE) 2.500 X 20 MM 1/4" X 3/8" (SEAL) 1/2" 7/16" 3-31/64" X 0.139" (LOAD CHECK SPRING) (SPRING SEAT) 1/4" X 0.880" (SHUT-OFF) (NOT ILLUSTRATED) (CIRCUIT RELIEFS) (MUST BE ORDERED SEPERATELY, WILL NOT COME WITH AUX VALVE) (3500 PSI, 1 GALLON PER MINUTE) (NOT ILLUSTRATED) (CIRCUIT RELIEFS) (MUST BE ORDERED SEPERATELY, WILL NOT COME WITH AUX VALVE) (2150 PSI, 1 GALLON PER MINUTE) M10 X 30 M10 5/16" (AUXILIARY CONTROL LINKAGE) (FOR CONTROL ROD) (KIT)(INCLUDES TIE RODS AND NUTS) (STANDARD AUXILIARY VALVE) (AUXILIARY VALVE WITH FLOAT) (INCLUDES AT222384) (NOT ILLUSTRATED) (SHOWN ON HYDRAULIC CONTROL VALVE PAGE) (FIELD EQUIPMENT) (AUXILIARY VALVE WITH LINKAGE)

3262-5

PN=389


3262-6 DOZERS

32

CONTROL VALVES 3262 AUXILIARY VALVE WITH LINKAGE (FIFTH FUNCTION) T206460

3262-6

-UN-13JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=390


3262-7 DOZERS

32

CONTROL VALVES 3262 AUXILIARY VALVE WITH LINKAGE (FIFTH FUNCTION)

KEY

1 3 4 5 6 8 9 10 11 12 14 16 17 19 20 22 23 24 26 27 28 29

30 31 32 33 34

35

PART NO.

PART NAME

QTY.

T71570 AT140287 R11151 19M8081 24M7096 14H732 M80373 11M7081 R65563 21H1352 T118685 14H865 14H807 T81539 T81538 T177847 T81540 T187884 T118808 19H3554 T183756 AT83174 AT165736

GRIP BOOT LOCK NUT CAP SCREW WASHER NUT YOKE COTTER PIN PIN FASTENER SCREW O-RING NUT NUT SPRING POPPET PLATE RETAINER SPRING CAP SCREW SEAL FITTING PLUG PRESSURE RELIEF VALVE

1 1 1 1 1 1 1 1 1 2 1 2 4 1 1 2 2 1 1 2 1 2 AR

AT171403

PRESSURE RELIEF VALVE

AR

14H882 AT48548 AT221310 AA34134 AT221853 AT224727 AT224728

NUT BALL JOINT LEVER BALL BEARING TIE ROD ASSEMBLY SPOOL VALVE SPOOL VALVE

1 1 1 2 1 1 1

AT222384

SPRING ASSEMBLY

1

AT220863

HYD ACTUATED CONTROL VALVE

1

700J CRAWLER DOZER (S.N. -139435)

PC9473

(04-AUG-05)

SERIAL NO.

REMARKS

5/16" M10 X 80 10.500 X 18 X 1.600 MM 3/8" (ADJUSTABLE) 2.500 X 20 MM 0.370" X 1.122" 1/4" X 3/8" 3-31/64" X 0.139" 1/2" 7/16" (SEAL) (SPRING SEAT) (SPOOL END CAP) 1/4" X 0.880" (SHUT-OFF) (NOT ILLUSTRATED) (CIRCUIT RELIEFS) (MUST BE ORDERED SEPERATELY, WILL NOT COME WITH AUX VALVE) (3500 PSI, 1 GALLON PER MINUTE) (NOT ILLUSTRATED) (CIRCUIT RELIEFS) (MUST BE ORDERED SEPERATELY, WILL NOT COME WITH AUX VALVE) (2150 PSI, 1 GALLON PER MINUTE) 5/16" (AUXILIARY CONTROL LINKAGE) (STANDARD AUXILIARY VALVE) (AUXILIARY VALVE WITH FLOAT) (INCLUDES AT222384) (NOT ILLUSTRATED) (SHOWN ON HYDRAULIC CONTROL VALVE PAGE) (FIELD EQUIPMENT)

3262-7

PN=391


3263-2 DOZERS

32

LINES, HOSES AND FITTINGS 3263 LIFT PLUMBING T207336

3263-2

-UN-27JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=392


3263-3 DOZERS

32

LINES, HOSES AND FITTINGS 3263 LIFT PLUMBING

KEY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

PART NO.

........ TY22470 AR85327 R26375 38H1005 T77857 AT208515 38H1354 T181801 38H1161 AT220570 AT220620 T77932 38H1032 AT220621 AT220622

PART NAME

QTY.

HOSE GUARD CLAMP CLAMP O-RING ELBOW FITTING O-RING TUBE TUBE NUT CLAMP ADAPTER FITTING HYDRAULIC HOSE - FABRICATE HYDRAULIC HOSE - FABRICATE O-RING TEE FITTING HYDRAULIC HOSE - FABRICATE HYDRAULIC HOSE - FABRICATE

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05)

2 2 2 4 2 6 2 4 2 2 1 1 3 2 1 1

SERIAL NO.

REMARKS

(CUT FROM BULK 1410MM, PARKER PS-B-33)

0.489" X 0.070" (HYDRAULIC OIL TUBE) (TUBE SUPPORT) (RIGHT LIFT CYLINDER, HEAD END) (RIGHT LIFT CYLINDER, ROD END) 0.614" X 0.070" (LEFT LIFT CYLINDER, ROD END) (LEFT LIFT CYLINDER, HEAD END)

3263-3

PN=393


3263-4 DOZERS

32

LINES, HOSES AND FITTINGS 3263 TILT PLUMBING T206462

3263-4

-UN-04FEB05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(04-AUG-05) PN=394


3263-5 DOZERS

32

LINES, HOSES AND FITTINGS 3263 TILT PLUMBING

KEY

PART NO.

PART NAME

QTY.

1 2 3 4 5 6 8 9 12

AT220646 ........ 14M7274 24M7296 AT136909 19M7550 24M7239 T34530 ........

HYDRAULIC HOSE - FABRICATE HOSE GUARD NUT WASHER CLAMP CAP SCREW WASHER ANGLE ISOLATOR

2 2 2 6 2 1 2 1 AR

13

........

ISOLATOR

AR

14 15 16 17 18 19

24H1272 T176009 T77857 38H1095 T78716 24M7396

WASHER PLATE O-RING ELBOW FITTING NUT WASHER

700J CRAWLER DOZER (S.N. -139435)

PC9473

2 1 4 2 2 2

(03-FEB-05)

SERIAL NO.

REMARKS

(CUT FROM BULK 1537MM, PARKER PS-B-47) M10 10.500 X 30 X 2.500 MM M10 X 35 10.700 X 21 X 2.500 MM (MAKE FROM T176644 BULK MATERIAL, CUT TO LENGTH 6 INCHES) (MAKE FROM T61861 BULK MATERIAL, CUT TO LENGTH(1 FT)) 9/16" X 1-1/4" X 1/4" 0.489" X 0.070" 13/16" 21 X 34 X 3 MM

3263-5

PN=395


3263-6 DOZERS

32

LINES, HOSES AND FITTINGS 3263 ANGLE PLUMBING T207335

3263-6

-UN-27JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=396


3263-7 DOZERS

32

LINES, HOSES AND FITTINGS 3263 ANGLE PLUMBING

KEY

1 2 3 4 5

PART NO.

AT220646 38H1095 T77857 T78716 24M7396

PART NAME

QTY.

HYDRAULIC HOSE - FABRICATE ELBOW FITTING O-RING NUT WASHER

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05)

2 2 4 2 2

SERIAL NO.

REMARKS

0.489" X 0.070" 13/16" 21 X 34 X 3 MM

3263-7

PN=397


3263-8 DOZERS

32

LINES, HOSES AND FITTINGS 3263 BLADE PLUMBING T207334

3263-8

-UN-27JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=398


3263-9 DOZERS

32

LINES, HOSES AND FITTINGS 3263 BLADE PLUMBING

KEY

1

PART NO.

PART NAME

QTY.

AT219986 AT221229 24M7239 AT62123 ........

CABLE CABLE WASHER CLAMP HOSE SLEEVE - FABRICATE

1 1 6 2 AR

........

HOSE SLEEVE - FABRICATE

AR

5 6

TY22472 ........

CLAMP HOSE GUARD

3 AR

7

AR44217 R76477 T118385 AT220715 T77857 38H1161 R26375 38H1095 38H1321 24M7396 T78716 38H1031 AT220716 AT220717 ........ 38H1005 AT221024 AT221276 ........ AT221604 AT222554

CLAMP TIE BAND CLAMP HYDRAULIC HOSE - FABRICATE O-RING ADAPTER FITTING O-RING ELBOW FITTING ELBOW FITTING WASHER NUT TEE FITTING HYDRAULIC HOSE - FABRICATE HYDRAULIC HOSE - FABRICATE HOSE GUARD ELBOW FITTING HYDRAULIC HOSE - FABRICATE HYDRAULIC HOSE - FABRICATE HOSE GUARD HYDRAULIC HOSE - FABRICATE HYDRAULIC HOSE - FABRICATE

7 AR 2 1 16 4 6 2 2 2 2 2 1 1 AR 2 2 2 AR 1 1

25

AT221515 AT221622

HYDRAULIC HOSE - FABRICATE HYDRAULIC HOSE - FABRICATE

1 1

26 27 28 29 30 31 32

19M7638 24M7296 T177132 T151427 14M7517 19M7572 AT220714

CAP SCREW WASHER GUARD BUSHING LOCK NUT CAP SCREW HYDRAULIC HOSE - FABRICATE

1 2 1 1 2 1 1

2 3 4

8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05)

SERIAL NO.

REMARKS

(STANDARD MACHINE) (WITH LOW GROUND PRESSURE) 10.700 X 21 X 2.500 MM (CORDURA-BLADE TO GRILLE) (CUT TO LENGTH 1321MM(52 INCHES), MAKE FROM PARKER BULK PS-B-47) (STANDARD MACHINE) (CORDURA-BLADE TO GRILLE) (CUT TO LENGTH 1537MM(60.5 INCHES), MAKE FROM PARKER BULK PS-B-47) (WITH LOW GROUND PRESSURE) (CORDURA-RIGHT ANGLE CYLINDER TO BLOCK) (CUT FROM BULK 533MM, PARKER PS-B-33) (NOT ILLUSTRATED) (ANGLE CYLINDER, HEAD END) 0.489" X 0.070" 0.644" X 0.087" 21 X 34 X 3 MM 13/16" (ANGLE CYLINDER, ROD END) (ANGLE CYLINDER, HEAD END) (CUT FROM BULK 838MM, PARKER PS-B-33) (STANDARD MACHINE) (WITH LOW GROUND PRESSURE) (CUT FROM BULK 966MM, PARKER PS-B-33) (TILT CYLINDER, HEAD END) (STANDARD MACHINE) (TILT CYLINDER, HEAD END) (WITH LOW GROUND PRESSURE) (TILT CYLINDER, ROD END) (STANDARD MACHINE) (TILT CYLINDER, ROD END) (WITH LOW GROUND PRESSURE) M10 X 130 10.500 X 30 X 2.500 MM (ANGLE HOSE GUARD) 17.385 X 30.163 X 75 MM M10 M10 X 45 (ANGLE CYLINDER, ROD END)

3263-9

PN=399


3263-10 DOZERS

32

LINES, HOSES AND FITTINGS 3263 RIPPER HOSES T207333

3263-10

-UN-27JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=400


3263-11 DOZERS

32

LINES, HOSES AND FITTINGS 3263 RIPPER HOSES

KEY

1 2 3 4 5 6 7

PART NO.

38H1013 U12547 T77857 AT168175 T78716 38H1275 38H1416

PART NAME

QTY.

ELBOW FITTING O-RING O-RING HYDRAULIC HOSE - FABRICATE NUT ADAPTER FITTING FITTING

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05)

2 2 6 2 2 2 2

SERIAL NO.

REMARKS

0.924" X 0.116" 0.489" X 0.070" (REAR COVER PLATE TO HYDRAULIC CONTROL VALVE) 13/16"

3263-11

PN=401


3265-2 DOZERS

32

HYDRAULIC CYLINDERS 3265 HYDRAULIC ANGLE CYLINDER T212932

3265-2

-UN-25JUL05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(04-AUG-05) PN=402


3265-3 DOZERS

32

HYDRAULIC CYLINDERS 3265 HYDRAULIC ANGLE CYLINDER

KEY

1 2 3 10 17 21 22 23 24 25 27 28 29 30 31 32 33 34 35 37 39

PART NO.

PART NAME

QTY.

40 41 42 43 44 52 53 54

40M5099 AH150341 19H3632 JD7799 H145176 AH169828 AH146558 H180103 R79101 AH146562 14M7517 T137908 19M8197 T101975 AH211326 AH169827 F1430R H152204 H152795 H206859 AT223552 AT223656 14M7426 19M7663 R91730 E65288 R83576 AH211335 H155630 AH149814

SNAP RING BUSHING CAP SCREW LUBRICATION FITTING WASHER HYDRAULIC CYLINDER ROD SEAL SNAP RING BACK-UP RING SEAL LOCK NUT CLAMP CAP SCREW BUSHING HYDRAULIC CYLINDER BARREL PISTON O-RING SEAL WEAR RING SNAP RING GUARD GUARD LOCK NUT CAP SCREW RING O-RING O-RING HYDRAULIC CYLINDER SEAL HYDRAULIC CYLINDER KIT

4 2 1 1 1 1 1 1 1 1 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1

55

AH212097

HYDRAULIC CYLINDER KIT

1

56

H209264

HYDR. CYLINDER ROD GUIDE

1

700J CRAWLER DOZER (S.N. -139435)

PC9473

(04-AUG-05)

SERIAL NO.

REMARKS

(SPHERICAL) 1" X 3" 90 X 0.770" LONG 26.600 X 44.500 X 6.200 MM (WIPER) (ROD UNIVERSAL) 3.228" X 3.556" X 0.070" (BUFFER) M10 M10 X 85 10.560 X 17.460 X 45 MM 3.100" X 0.210" (ROD) (ROD) (RIGHT HAND SIDE CYLINDER STEP GUARD) (LEFT HAND SIDE CYLINDER STEP GUARD) M8 M8 X 70 (NOT ILLUSTRATED) (FILLER) 3.239" X 0.070", (NOT ILLUSTRATED) 3.100" X 0.210", (NOT ILLUSTRATED) (BLADE ANGLE) (NOT ILLUSTRATED) (WIPER INSTALLATION TOOL) (ROD SEAL KIT) (INCLUDES AH146558, AH146562, H152204, H152795 AND H155630) (BORE SEAL KIT) (INCLUDES R79101, R83576, R91730 AND E65288)

3265-3

PN=403


3265-4 DOZERS

32

HYDRAULIC CYLINDERS 3265 HYDRAULIC LIFT CYLINDER T207211

3265-4

-UN-01FEB05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=404


3265-5 DOZERS

32

HYDRAULIC CYLINDERS 3265 HYDRAULIC LIFT CYLINDER

KEY

5 6 7 8 9 11 12 13 14 15 19 20 37 38 42 43 44 45 46 47 49 50 54

PART NO.

H208995 F950R R81862 H208987 H210686 H180094 AH146557 H180080 H152203 AH146561 T162396 R81971 AH205062 H170539 24H1790 19M7872 AT221145 28H3418 R81968 AH215879 AH160177 AH215878 AH210484

PART NAME

QTY.

HYDR. CYLINDER ROD GUIDE O-RING BACK-UP RING WEAR RING O-RING SNAP RING SEAL SNAP RING SEAL SEAL LUBRICATION FITTING BUSHING PISTON NUT WASHER CAP SCREW PIN WASHER BUSHING HYDRAULIC CYLINDER BARREL HYDRAULIC CYLINDER ROD HYDRAULIC CYLINDER HYDRAULIC CYLINDER KIT

700J CRAWLER DOZER (S.N. -139435)

PC9473

(12-APR-06)

1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1

SERIAL NO.

REMARKS

(WIPER) (U-CUP) (BUFFER) (SUB FOR AH159034) (UNITIZED) M30 17/32" X 1-1/2" X 0.164" M12 X 25 0.546" X 0.840" X 5/16"

(LIFT) (ROD SEAL KIT) (INCLUDES AH146557, H152203, AH146561 AND H208987)

3265-5

PN=405


3265-6 DOZERS

32

HYDRAULIC CYLINDERS 3265 HYDRAULIC TILT CYLINDER T207212

3265-6

-UN-19JAN05

THIS PARTS LISTING IS CONTINUED 700J CRAWLER DOZER (S.N. -139435)

PC9473

(13-APR-07) PN=406


3265-7 DOZERS

32

HYDRAULIC CYLINDERS 3265 HYDRAULIC TILT CYLINDER

KEY

PART NO.

PART NAME

QTY.

1 2 3 4 5 6 7 8 9 12 13 14 15 16 17 18 19 28

40M5099 AH150341 19H3632 H180094 H208995 F950R R81862 H208987 AH169778 AH146557 H180080 H152203 AH146561 AH169826 H145176 AH216999 JD7799 AH210484

SNAP RING BUSHING CAP SCREW SNAP RING HYDR. CYLINDER ROD GUIDE O-RING BACK-UP RING WEAR RING HYDRAULIC CYLINDER ROD SEAL SNAP RING SEAL SEAL PISTON WASHER HYDRAULIC CYLINDER BARREL LUBRICATION FITTING HYDRAULIC CYLINDER KIT

4 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

51

AH216998

HYDRAULIC CYLINDER

1

700J CRAWLER DOZER (S.N. -139435)

PC9473

(13-APR-07)

SERIAL NO.

REMARKS

(SPHERICAL) 1" X 3" 3.475" X 0.210" (ROD BEARING) (WIPER) (U-CUP) (BUFFER) 26.600 X 44.500 X 6.200 MM (ROD SEAL KIT) (INCLUDES AH146557, AH146561, H152203 AND H208987) (TILT)

3265-7

PN=407


3265-8 DOZERS

32

HYDRAULIC CYLINDERS 3265 MEMORANDA

3265-8

700J CRAWLER DOZER (S.N. -139435)

PC9473

(03-FEB-05) PN=408


00II-1 700J CRAWLER DOZER (S.N. -139435)

NUMERICAL INDEX PART NO.

KEY

AA34134 AA34134 AA34134 AH106982 AH106982 AH123403 AH128450 AH128450 AH146557 AH146557 AH146557 AH146557 AH146558 AH146558 AH146561 AH146561 AH146561 AH146561 AH146562 AH146562 AH149814 AH150341 AH150341 AH159034 AH160177 AH169778 AH169826 AH169827 AH169828 AH205062 AH210484 AH210484 AH211326 AH211335 AH212097 AH215878 AH215879 AH216998 AH216999 AH78237 AH89557 AL153660 AM102420 AM102487 AM118213 AN220311 AN220311 AN220311 AN220311 AN220311 AN220419 AR21837 AR21837 AR21837 AR21837 AR21999 AR44217 AR44361 AR65507 AR85327 AR85519 AR85519 AT106397 AT112903 AT112928 AT120461 AT125801

8 37 32 2 34 11 15 16 12 54 12 28 22 54 15 54 15 28 25 54 54 2 2 37 49 9 16 32 21 37 54 28 31 52 55 50 47 51 18 23 18 3 4 5 2 20 20 9 25 30 25 15 6 6 4 2 7 10 9 3 25 13 1 13 24 3 2

PAGE

3215-3 3262-5 3262-7 0563-3 0563-3 0355-7 0364-3 2164-5 3265-5 3265-5 3265-7 3265-7 3265-3 3265-3 3265-5 3265-5 3265-7 3265-7 3265-3 3265-3 3265-3 3265-3 3265-7 3265-5 3265-5 3265-7 3265-7 3265-3 3265-3 3265-5 3265-5 3265-7 3265-3 3265-3 3265-3 3265-5 3265-5 3265-7 3265-7 1832-3 0511-3 1814-7 0363-3 0363-3 0563-3 0355-5 0355-7 0355-9 0355-11 0355-13 0355-13 0505-9 1831-5 1831-7 2163-11 0505-3 3263-9 0521-3 0403-1 3263-3 0413-3 0420-7 1821-7 0132-5 3215-3 2004-5 1821-7

700J CRAWLER DOZER (S.N. -139435)

PC9473

PART NO.

KEY

AT125803 AT125805 AT125829 AT128774 AT128774 AT136909 AT136909 AT13740 AT13740 AT13740 AT140287 AT140287 AT141724 AT145341 AT152180 AT156445 AT159554 AT160480 AT162114 AT162350 AT162848 AT162863 AT162863 AT163156 AT163872 AT164892 AT164892 AT164903 AT164903 AT165736 AT165736 AT166459 AT167356 AT167356 AT168175 AT168543 AT169186 AT169373 AT169374 AT170759 AT171107 AT171162 AT171403 AT171403 AT171539 AT173188 AT173188 AT173192 AT173193 AT173254 AT173304 AT173306 AT173307 AT173313 AT173313 AT173314 AT173314 AT173315 AT173315 AT173316 AT173317 AT173318 AT173319 AT173320 AT173321 AT173321 AT173321

4 7 5 6 6 7 5 2 23 5 3 3 19 10 1 10 24 3 12 13 14 1 1 6 5 4 9 3 8 31 29 30 1 1 4 8 20 33 15 1 1 7 31 29 1 4 18 4 3 27 4 12 15 6 2 8 4 7 3 3 9 17 16 18 9 10 5

(13-APR-07)

PAGE

1821-7 1821-7 1821-7 1743-3 3243-3 0363-11 3263-5 0404-3 0511-3 0564-3 3262-5 3262-7 1810-3 1674-9 2163-11 0564-3 0133-9 1676-3 1911-3 1115-3 1832-3 1674-11 1674-13 1672-3 1832-8 1832-5 1832-5 1832-5 1832-5 3262-5 3262-7 0511-3 1511-3 1511-5 3263-11 1832-8 0511-3 3262-3 0315-3 0505-3 1832-5 0505-3 3262-5 3262-7 0505-3 0355-3 0355-5 1814-5 1814-5 3243-3 0355-19 0355-19 0355-19 1821-19 1821-25 1821-19 1821-25 1821-19 1821-25 1821-17 1821-19 1821-21 1821-21 1821-21 1821-19 1821-19 1821-25

PART NO.

KEY

AT173321 AT173322 AT173323 AT173325 AT173326 AT173327 AT173328 AT173610 AT174697 AT174697 AT175357 AT175358 AT175436 AT176958 AT176958 AT176959 AT177131 AT177131 AT177132 AT177870 AT178542 AT180814 AT181917 AT182200 AT182399 AT182479 AT182589 AT183222 AT184799 AT184822 AT184868 AT184868 AT184869 AT184869 AT186172 AT186172 AT186760 AT186760 AT186760 AT186760 AT186925 AT188681 AT191102 AT195301 AT195302 AT195894 AT195894 AT196462 AT203470 AT206842 AT207364 AT207486 AT207486 AT207545 AT207639 AT207848 AT207849 AT208436 AT208484 AT208485 AT208485 AT208486 AT208487 AT208488 AT208490 AT208491 AT208493

6 11 4 5 13 14 12 24 4 4 2 12 9 6 2 7 4 11 1 10 10 17 13 17 8 6 2 13 4 24 18 9 20 5 2 8 6 13 13 5 29 5 15B 4 5 14 10 14 4 13 10 3 1 9 2 3 4 12 1 5 1 14 8 8 11 6 12

PAGE

1821-25 1821-19 1821-17 1821-17 1821-21 1821-21 1821-21 0511-3 1831-5 1831-7 0521-3 0521-3 1821-7 1814-7 1814-9 1814-7 1814-7 1814-9 1814-9 1671-3 0521-3 0355-21 0355-19 1831-3 0355-21 1821-9 1821-17 0505-3 1743-3 0355-21 0355-21 0355-23 0355-21 0355-23 0364-5 2164-3 1810-3 1810-5 1810-5B 1810-15 0511-3 1814-7 1831-9 1676-3 1676-3 1821-5 1821-15 0355-21 0521-3 0521-3 0363-13 1811-5 1831-3 1832-3 1832-5 1831-9 1831-9 1810-13 1821-25 1821-23 1821-25 1821-27 1821-27 1821-25 1821-27 1821-25 1821-27

00II-1

PN=409


00II-2 700J CRAWLER DOZER (S.N. -139435)

NUMERICAL INDEX - CONTINUED PART NO.

KEY

AT208495 AT208515 AT208549 AT208682 AT209020 AT209021 AT209024 AT209024 AT209025 AT209026 AT209110 AT209110 AT209110 AT209110 AT209225 AT209259 AT209299 AT209303 AT209308 AT209308 AT209469 AT209926 AT209965 AT210156 AT210158 AT210265 AT210517 AT210549 AT210791 AT210791 AT210829 AT210886 AT210996 AT211118 AT211118 AT211191 AT211192 AT211239 AT211255 AT211316 AT211344 AT211347 AT211548 AT211550 AT211554 AT211577 AT211579 AT211579 AT214541 AT214541 AT214566 AT214702 AT214702 AT214844 AT214860 AT214861 AT214873 AT214874 AT219733 AT219793 AT219938 AT219952 AT219952 AT219953 AT219953 AT219958 AT219959

9 7 21 7 7 12 2 3 6 3 5 11 10 3 9 1 11 3 9 7 13 15 4 32 28 5 13 15 5 9 2 1 22 1 7 6 6 15 16 13 33 4 1 17 17 1 5 10 2 10 11 4 6 2 8 7 7 9 13 1 11 14 19 27 25 17 1

00II-2

PAGE

2001-3 3263-3 0511-3 0363-9 1821-9 1821-9 1821-29 1821-29 1821-31 1821-29 0364-5 1912-3 1921-3 2164-3 1821-31 1821-3 0363-13 0363-9 1811-3 1811-5 1821-27 0521-3 0375-3 0563-3 0563-3 3215-3 1671-3 1821-21 1821-3 1821-5 1741-3 1810-9 0511-3 0364-5 2164-3 0505-5 1831-3 0363-11 0363-11 3215-3 0511-3 0512-3 0132-3 0132-5 0132-5 1810-13 1821-3 1821-7 0355-19 0355-23 0355-19 0355-19 0355-19 0355-5 0355-9 0355-9 0355-13 0355-13 1831-9 0315-3 0363-5 1673-5 1673-7 1673-5 1673-7 0132-5 0132-3

PART NO.

KEY

AT219986 AT220049 AT220051 AT220053 AT220105 AT220105 AT220265 AT220266 AT220268 AT220269 AT220277 AT220278 AT220279 AT220292 AT220311 AT220322 AT220327 AT220452 AT220474 AT220477 AT220510 AT220542 AT220567 AT220570 AT220590 AT220620 AT220621 AT220622 AT220633 AT220634 AT220642 AT220643 AT220646 AT220646 AT220702 AT220703 AT220704 AT220706 AT220707 AT220708 AT220709 AT220710 AT220711 AT220714 AT220715 AT220716 AT220717 AT220750 AT220753 AT220759 AT220770 AT220771 AT220774 AT220778 AT220778 AT220817 AT220833 AT220846 AT220855 AT220860 AT220863 AT220879 AT220912 AT220913 AT220914 AT220916 AT220918

1 5 4 1 7 7 2 5 10 6 17 18 19 4 1 31 1 1 3 3 11 14 6 10 24 11 14 15 4 3 5 5 1 1 33 62 59 25 49 39 24 57 56 32 9 18 19 13 2 3 10 12 5 11 8 9 2 26 65 40 35 29 8 9 7 6 3

PAGE

3263-9 1511-3 1511-5 1512-3 1810-13 1821-13 1811-3 0363-5 0363-5 0363-5 0363-11 0363-11 0363-11 1821-3 2163-5 3215-3 0363-9 0531-3 1743-5 1743-5 0564-3 1831-7 2164-3 3263-3 0364-5 3263-3 3263-3 3263-3 0131-3 0131-3 0131-3 0131-3 3263-5 3263-7 0315-3 0315-3 0315-3 0315-3 0315-3 0315-3 0315-3 0315-3 0315-3 3263-9 3263-9 3263-9 3263-9 2001-3 1831-3 3215-3 0355-13 0355-11 0355-7 0355-3 0355-7 1831-9 0511-5 0363-11 0315-3 3262-5 3262-7 0315-3 1741-3 1741-3 1741-3 1741-3 1741-3

PART NO.

KEY

AT220921 AT220933 AT220995 AT221015 AT221015 AT221015 AT221016 AT221016 AT221016 AT221017 AT221017 AT221024 AT221027 AT221045 AT221048 AT221055 AT221055 AT221104 AT221145 AT221145 AT221168 AT221173 AT221200 AT221228 AT221228 AT221229 AT221245 AT221246 AT221247 AT221249 AT221254 AT221256 AT221263 AT221266 AT221267 AT221268 AT221276 AT221279 AT221283 AT221298 AT221302 AT221304 AT221308 AT221310 AT221312 AT221317 AT221319 AT221320 AT221321 AT221322 AT221323 AT221324 AT221337 AT221339 AT221340 AT221344 AT221351 AT221351 AT221355 AT221387 AT221388 AT221426 AT221427 AT221440 AT221450 AT221450 AT221450

14 32 28 2 2 2 3 3 3 6 6 22 22 8 4 55 55 12 19 44 10 9 8 51 51 1 4 7 11 9 9 37 8 31 1 33 22 32 9 4 5 2 8 32 7 24 19 15 12 27 2 40 29 32 27 17 4 9 1 14 14 14 22 17 5 13 10

700J CRAWLER DOZER (S.N. -139435)

PAGE

0521-3 0201-3 0133-9 1821-3 1821-13 1821-23 1821-3 1821-13 1821-23 1821-13 1821-23 3263-9 0133-9 1814-7 0133-11 1810-5 1810-5B 1814-9 3243-3 3265-5 0133-11 0133-11 3215-3 1810-5 1810-5B 3263-9 1831-3 1831-3 1831-3 1831-3 1921-3 3262-5 1831-9 1831-9 1831-9 1831-9 3263-9 1831-9 1810-13 1832-3 1743-7 1743-7 1832-3 3262-7 1832-3 1831-9 1832-3 1832-3 1832-3 1831-9 1832-3 1832-3 1831-9 1832-3 1832-3 0132-5 1673-5 1673-7 1814-5 3243-3 3243-3 1743-3 0133-9 0505-9 1673-3 1673-5 1673-7 PC9473

(13-APR-07) PN=410


00II-3 700J CRAWLER DOZER (S.N. -139435)

NUMERICAL INDEX - CONTINUED PART NO.

KEY

AT221478 AT221486 AT221515 AT221560 AT221574 AT221578 AT221578 AT221596 AT221596 AT221596 AT221597 AT221604 AT221605 AT221610 AT221611 AT221619 AT221622 AT221623 AT221680 AT221680 AT221693 AT221743 AT221783 AT221808 AT221845 AT221848 AT221849 AT221851 AT221852 AT221853 AT221854 AT221920 AT221937 AT221990 AT222039 AT222041 AT222088 AT222214 AT222218 AT222219 AT222258 AT222384 AT222384 AT222384 AT222443 AT222484 AT222507 AT222536 AT222540 AT222541 AT222550 AT222554 AT222555 AT222606 AT222608 AT222609 AT222652 AT222676 AT222676 AT222676 AT222696 AT222697 AT222705 AT222722 AT222736 AT222803 AT222804

9 1 25 18 13 2 12 6 7 10 5 24 19 10 1 28 25 5 9 17 25 21 6 59 7 7 47 1 38 33 50 8 4 20 9 19 6 21 60 60 5 50 39 34 1 5 7 12 10 13 26 24 4 8 5 2 28 5 17 26 22 23 7 3 26 58 3

PAGE

0133-11 0133-11 3263-9 0505-9 1810-13 1814-9 1814-9 1814-7 1814-7 1814-9 0133-11 3263-9 0505-9 0133-11 0133-11 0355-13 3263-9 0133-11 0364-3 2164-5 0511-3 0131-3 3215-3 1810-7 1673-3 3262-3 3262-3 3262-3 3262-5 3262-7 0315-3 1822-3 1822-3 0505-9 1671-3 1671-3 0133-9 0505-9 0201-5 0201-5 1813-5 3262-3 3262-5 3262-7 1921-5 1921-5 1511-7 1921-3 1921-5 1921-5 0511-3 3263-9 0563-3 0315-3 0315-3 0315-3 0511-3 1673-3 1673-5 1673-7 0505-9 0505-9 2001-3 0521-3 1831-9 0315-3 0315-3

700J CRAWLER DOZER (S.N. -139435)

PC9473

PART NO.

KEY

AT222807 AT222829 AT222830 AT222831 AT222900 AT222916 AT223099 AT223103 AT223216 AT223217 AT223218 AT223218 AT223225 AT223247 AT223247 AT223253 AT223278 AT223375 AT223377 AT223447 AT223447 AT223447 AT223447 AT223447 AT223447 AT223447 AT223447 AT223447 AT223454 AT223454 AT223454 AT223454 AT223454 AT223454 AT223454 AT223454 AT223454 AT223454 AT223454 AT223468 AT223468 AT223492 AT223527 AT223552 AT223636 AT223656 AT223739 AT223769 AT223821 AT223872 AT223873 AT223898 AT223909 AT223909 AT223910 AT223921 AT223937 AT223939 AT224007 AT224007 AT224094 AT224119 AT224151 AT224194 AT224201 AT224344 AT224351

2 11 3 8 18 16 24 25 10 9 6 15 31 2 1 28 1 29 11 2 3 4 5 6 7 8 9 10 1 11 12 13 14 15 16 17 18 19 20 16 14 25 6 39 4 39 11 12 7 3 4 6 50 53 2 6 26 6 4 3 26 5 5 5 8 29 3

(13-APR-07)

PAGE

1921-3 1511-7 1511-7 2001-3 1921-3 0540-3 0505-9 0505-9 0355-5 0355-5 0355-3 0355-7 0511-3 1821-5 1821-15 1831-9 3215-3 3215-3 1813-5 1807-5 1807-5 1807-5 1807-5 1807-5 1807-5 1807-5 1807-5 1807-5 1807-5 1807-5 1807-5 1807-5 1807-5 1807-5 1807-5 1807-5 1807-5 1807-5 1807-5 0364-5 2164-3 0133-9 0540-3 3265-3 1671-3 3265-3 0363-11 0564-3 1814-3 1832-5 1832-5 1832-3 0201-5 0201-5 0201-3 1912-3 0363-11 1921-5 1927-3 1927-5 0505-9 0131-3 0375-3 0355-21 0355-19 0355-13 2161-5

PART NO.

KEY

AT224352 AT224354 AT224356 AT224393 AT224393 AT224602 AT224604 AT224606 AT224719 AT224721 AT224724 AT224725 AT224726 AT224727 AT224727 AT224728 AT224728 AT224729 AT224730 AT224731 AT224734 AT224873 AT224893 AT224893 AT224894 AT224949 AT225112 AT225122 AT225123 AT225125 AT225563 AT225605 AT225664 AT225665 AT225674 AT225675 AT225681 AT225730 AT225822 AT225823 AT225885 AT225927 AT225928 AT226282 AT226282 AT226360 AT226360 AT226426 AT226427 AT226430 AT226430 AT226441 AT226441 AT226470 AT226470 AT226471 AT226561 AT226562 AT226610 AT226611 AT226676 AT226685 AT226685 AT226686 AT226686 AT226686 AT226693

1 3 1 9 10 3 8 14 16 16 52 49 48 39 34 39 34 54 54 32 34 10 5 2 5 27 12 33 34 12 3 27 7 9 4 3 5 6 4 3 10 4 9 1 4 7 8 24 25 7 8 2 4 4 5 5 2 1 7 7 7 5 1 5 1 10 1

PAGE

2161-3 2161-5 2161-3 1821-25 1821-27 1831-3 1831-3 1115-3 1831-9 1831-9 3262-3 3262-3 3262-3 3262-5 3262-7 3262-5 3262-7 3262-3 3262-3 0511-3 1831-9 1062-3 2001-3 2006-3 2001-3 3243-3 0363-7 0363-11 0363-11 0363-13 1811-7 0505-9 0131-7 0131-7 0132-9 0132-9 0131-13 0131-13 0131-3 0131-3 1912-3 0131-5 0131-5 2004-3 2004-3 1743-3 1743-3 0363-13 0363-13 1743-3 1743-3 0355-3 0355-9 1821-11 1821-11 1821-11 0540-3 0540-3 1743-3 1743-3 1821-25 1821-13 1821-17 1821-23 1821-25 1821-27 1821-13

00II-3

PN=411


00II-4 700J CRAWLER DOZER (S.N. -139435)

NUMERICAL INDEX - CONTINUED PART NO.

KEY

AT226694 AT226697 AT226698 AT226733 AT226804 AT227029 AT227030 AT227279 AT227279 AT227668 AT227668 AT227669 AT227669 AT227674 AT227675 AT227785 AT228068 AT228292 AT228292 AT228298 AT228420 AT228531 AT228533 AT228841 AT276140 AT280406 AT280406 AT280583 AT300952 AT300953 AT300954 AT300970 AT301442 AT301498 AT301498 AT301762 AT301762 AT301762 AT301792 AT301982 AT302009 AT302222 AT302223 AT303698 AT303797 AT303798 AT303799 AT303821 AT303861 AT303862 AT303862 AT303862 AT303864 AT303864 AT303865 AT303867 AT304200 AT304326 AT304634 AT304671 AT304672 AT304672 AT304714 AT304718 AT305203 AT305224 AT305225

1 1 1 1 3 4 3 9 10 55 11 57 58 7 6 41 10 4 4 9 1 26 25 13 6 45 54 4 1 6 6 9 2 4 2 13 9 16 11 12 13 18 19 2 3 4 10 6 12 19 16 7 13 12 25 16 22 72 10 9 3 6 16 1 11 1 17

00II-4

PAGE

1821-13 1821-23 1821-23 0131-9 1743-3 0131-3 0131-3 0364-5 2164-3 1810-5B 1810-7 1810-5B 1810-7 0131-13 0131-11 1832-3 2163-7 1821-13 1821-23 1062-3 1911-5 2164-3 0364-5 0563-3 0133-5 3262-3 3262-3 1821-29 0201-7 0201-7 0201-7 0355-19 0325-3 1674-5 1674-7 0355-3 0355-7 0355-19 2163-7 2163-7 2164-5 0132-5 0132-5 1911-3 0131-11 0131-11 1062-3 0131-11 1814-7 1673-5 1673-7 1676-3 1831-3 1831-9 1832-3 1676-3 1810-3 0315-3 1814-7 0355-15 0355-3 0355-15 0355-3 0355-3 1911-3 0132-3 0132-5

PART NO.

KEY

AT305226 AT305227 AT305233 AT305234 AT305235 AT305695 AT305855 AT306056 AT306181 AT306182 AT306399 AT306469 AT306587 AT306587 AT306587 AT306587 AT306674 AT306743 AT306744 AT306798 AT306799 AT306803 AT306983 AT307089 AT307096 AT307105 AT307253 AT307278 AT307278 AT307278 AT307292 AT307292 AT307292 AT307292 AT307543 AT307543 AT307626 AT307745 AT307746 AT307772 AT307980 AT307982 AT307984 AT307986 AT308006 AT308055 AT308470 AT308735 AT308736 AT308737 AT308795 AT308795 AT308796 AT308796 AT308797 AT308797 AT308928 AT309176 AT309946 AT310614 AT310615 AT310723 AT310970 AT311106 AT311107 AT312468 AT312606

17 17 17 1 17 5 9 13 23 10 20 21 12 35 33 33 11 34 1 1 34 4 2 6 32 64 22 6 12 13 6 7 12 13 14 17 47 30 30 14 11 1 1 2 10 7 2 38 33 31 2 2 3 3 6 6 6 2 1 37 37 7 16 1 24 9 13

PAGE

0132-5 0132-5 0132-5 0132-3 0132-5 0133-3 0133-5 1115-5 1813-3 1813-3 0133-3 0133-3 1322-3 1810-3 1810-5 1810-5B 1814-7 1813-3 1813-3 1813-3 1813-3 0133-5 0355-21 1676-3 1813-3 0315-3 0133-3 0364-5 2164-3 2164-3 0364-5 0364-5 2164-3 2164-3 0355-23 0355-23 0505-9 1813-3 1813-3 1115-5 1674-9 1674-3 1674-7 1674-5 1062-3 3201-3 0564-3 3243-3 3243-3 3243-3 1821-13 1821-23 1821-13 1821-23 1821-13 1821-23 0375-3 1741-3 0505-7 3243-3 3243-3 3201-3 1673-5 1673-5 1673-7 1911-3 1676-3

PART NO.

KEY

AT312707 AT312708 AT313403 AT313494 AT313496 AT313668 AT313668 AT313707 AT313707 AT313962 AT314034 AT314538 AT314728 AT314728 AT314756 AT314757 AT314758 AT314759 AT315017 AT315017 AT315017 AT315146 AT315147 AT315786 AT315789 AT315892 AT315893 AT315957 AT315958 AT316482 AT317949 AT317949 AT317949 AT317949 AT317949 AT317949 AT317949 AT318267 AT318268 AT320692 AT320978 AT321257 AT321522 AT321523 AT322180 AT322353 AT322354 AT322708 AT322752 AT322789 AT322789 AT322789 AT322789 AT322790 AT322790 AT322790 AT322790 AT323045 AT323046 AT323627 AT323628 AT324000 AT324134 AT324135 AT324136 AT326272 AT326632

9 9 1 56 9 30 28 15 11 63 7 47 4 4 10 8 11 9 3 3 14 8 9 19 20 11 1 14 15A 3 3 4 5 6 7 8 9 8 9 40 11 10 6 9 47 1 1 71 15 1 8 18 20 1 8 18 21 14 13 6 9 8 55 56 9 1 34

700J CRAWLER DOZER (S.N. -139435)

PC9473

PAGE

1813-3 1813-3 0355-23 1810-7 1810-7 1673-5 1673-7 1831-3 1831-5 1810-7 1912-3 3262-3 1810-5 1810-5B 0363-3 0363-3 0363-3 0363-3 0355-17 0355-19 0355-19 1741-3 1741-3 1322-5 1322-5 1832-3 1832-3 1831-9 1831-9 1807-3 1807-3 1807-3 1807-3 1807-3 1807-3 1807-3 1807-3 1814-3 1814-3 0201-5 1115-5 0363-7 0132-3 0132-3 3262-3 1811-5 1811-3 1810-5B 0363-7 0133-3 0133-3 0133-3 0133-3 0133-3 0133-3 0133-3 0133-3 0133-3 0133-3 0132-3 0132-3 1676-3 1810-5 1810-7 1810-7 1810-13 1831-9 (13-APR-07) PN=412


00II-5 700J CRAWLER DOZER (S.N. -139435)

NUMERICAL INDEX - CONTINUED PART NO.

KEY

AT326633 AT330297 AT330299 AT330449 AT330450 AT333064 AT333766 AT334532 AT334532 AT334533 AT334533 AT334796 AT334796 AT334796 AT334796 AT334796 AT334796 AT335803 AT335804 AT336352 AT338903 AT340467 AT341153 AT41188 AT46597 AT47069 AT47069 AT48548 AT48548 AT48548 AT48548 AT50923 AT54837 AT56657 AT56822 AT62123 AT73296 AT83174 AT83174 AT86950 AZ43305 A364R A4827R BP13712 B3690R CD16284 DP36113 DP36115 DP36297 DP40226 D2361R E12379 E12379 E12379 E1343FN E65288 E65288 E80224 F1430R F431875 F431875 F434249 F950R F950R GY20126 H110232 H110232

16 5 16 1 16 5 11 14 19 14 18 12 17 9 10 18 9 8 9 2 6 2 7 7 28 18 5 26 20 35 31 7 2 9 10 3 4 31 29 52 72 13 17 11 3 7 32 28 4 8 1 10 3 28 2 43 55 13 33 10 7 8 6 6 3 25 3

PAGE

1831-9 0355-7 0355-13 0355-3 0355-3 0363-5 0363-5 0355-23 0355-23 0355-23 0355-23 0355-3 0355-5 0355-7 0355-7 0355-21 0355-23 1814-3 1814-3 1674-5 0375-3 0540-3 3201-3 1671-3 0315-3 1671-3 1674-5 0315-3 3215-3 3262-5 3262-7 0521-3 2163-9 0521-3 3215-3 3263-9 0505-5 3262-5 3262-7 0315-3 1810-5B 0402-5 0452-3 2001-3 0133-3 0409-3 0563-3 0563-3 0563-3 0563-3 0404-3 1743-3 1743-7 3243-3 0429-3 3265-3 3265-3 0355-11 3265-3 0420-3 0420-5 0133-3 3265-5 3265-7 2006-3 1673-5 1673-7

700J CRAWLER DOZER (S.N. -139435)

PC9473

PART NO.

KEY

H110232 H122182 H130695 H144095 H145176 H145176 H148375 H152203 H152203 H152203 H152203 H152204 H152204 H152795 H152795 H155630 H155630 H170539 H180080 H180080 H180094 H180094 H180103 H206859 H208987 H208987 H208987 H208987 H208995 H208995 H209264 H210686 H23125 H61354 H82308 H85233 JD5764 JD5822 JD5920 JD7759 JD7759 JD7797 JD7797 JD7797 JD7797 JD7799 JD7799 JD8177 JD8194 JD8213 JD8230 JD8261 JD8924 JD8959 JD9041 JD9106 M115279 M115279 M115279 M115279 M115279 M117096 M1746T M3689T M40333 M41029 M43940

9 1 14 6 17 17 33 14 54 14 28 34 54 35 54 53 54 38 13 13 11 4 23 37 8 54 8 28 5 5 56 9 1 3 33 12 1 2 3 14 4 9 4 27 29 10 19 24 40 23 39 17 46 18 7 8 2 19 9 6 14 34 7 19 26 4 33

(13-APR-07)

PAGE

1813-5 0363-5 0407-2 1672-3 3265-3 3265-7 1832-3 3265-5 3265-5 3265-7 3265-7 3265-3 3265-3 3265-3 3265-3 3265-3 3265-3 3265-5 3265-5 3265-7 3265-5 3265-7 3265-3 3265-3 3265-5 3265-5 3265-7 3265-7 3265-5 3265-7 3265-3 3265-5 0402-3 2163-5 0563-3 1921-3 1322-3 1322-3 1322-3 3201-3 3243-3 1743-3 1743-7 3243-3 3243-3 3265-3 3265-7 0201-3 0201-5 0201-3 0201-5 0201-3 0201-5 0201-3 0133-5 0133-5 0505-7 1673-5 1676-3 1810-7 1831-3 3243-3 0407-2 0201-3 0363-11 0403-1 3215-3

PART NO.

KEY

M453T M45387 M48238 M64720 M68628 M68628 M68628 M68954 M68997 M74600 M74600 M74600 M74600 M80373 M80373 M84247 M84971 M84972 M84972 M84972 M85537 M85537 M87733 N157204 N203486 N203486 N203491 N203952 N206810 N206810 N220940 N31296 N31296 PM38655 P41858 P42061 RE12363 RE151064 RE151074 RE151096 RE151096 RE151096 RE151101 RE154222 RE157329 RE159656 RE167207 RE190139 RE19797 RE19800 RE198074 RE20901 RE31617 RE40048 RE43497 RE44574 RE44574 RE46684 RE46684 RE46685 RE46685 RE46686 RE46686 RE46686 RE48419 RE48419 RE500002

2 6 17 10 10 10 24 17 13 19 7 16 8 10 9 18 40 5 5 5 3 5 3 14 19 3 6 3 17 3 24 5 8 19 7 7 9 16 14 5 10 23 6 12 18 4 1 1 3 10 26 8 13 2 11 4 18 9 4 16 6 7 9 20 8 2 3

PAGE

1821-31 0355-21 1115-5 1912-3 0364-5 1912-3 2164-3 3215-3 1911-3 0355-19 0355-21 0355-21 0355-23 3262-5 3262-7 1115-5 0511-3 1810-5 1810-5B 1810-7 1927-3 1927-5 0416-2 1813-5 0355-5 0355-9 0355-7 0355-5 0355-3 0355-11 0355-13 1811-3 1811-5 0404-5 1831-9 0355-7 1832-8 0355-13 0355-11 0355-3 0355-11 0355-11 0355-11 1676-3 1832-3 0355-13 1678-3 2001-3 0413-3 0413-3 1831-9 0413-3 0409-3 0531-3 1831-9 0433-2 0452-3 0414-1 0418-3 0402-5 0419-3 0419-3 0420-7 0563-3 0363-11 1678-3 0403-1

00II-5

PN=413


00II-6 700J CRAWLER DOZER (S.N. -139435)

NUMERICAL INDEX - CONTINUED PART NO.

KEY

RE501060 RE501150 RE501938 RE503027 RE503208 RE503664 RE503664 RE503664 RE504134 RE504231 RE504233 RE504563 RE504836 RE504914 RE505264 RE505264 RE505501 RE505515 RE505921 RE505980 RE506818 RE506819 RE507149 RE507598 RE507766 RE507852 RE507864 RE507920 RE507920 RE507920 RE508185 RE508195 RE508317 RE508566 RE508716 RE508719 RE508847 RE508847 RE508932 RE508966 RE509031 RE509032 RE509036 RE509540 RE509794 RE509794 RE515228 RE515229 RE515230 RE515231 RE515232 RE515233 RE515360 RE515372 RE515372 RE515393 RE515404 RE515978 RE516340 RE516340 RE51649 RE51649 RE51650 RE516512 RE516512 RE516553 RE516553

11 11 4 5 7 1 4 12 24 2 5 3 10 2 17 7 18 24 4 17 9 8 2 2 28 6 1 7 8 10 4 1 9 20 20 2 2 13 6 2 3 3 6 1 1 11 12 11 6 5 4 1 7 10 1 2 18 32 24 18 14 4 7 11 9 17 2

00II-6

PAGE

0422-3 0422-3 0402-5 0402-3 0416-2 0429-3 0429-3 0429-3 0420-5 0407-2 0421-1 0407-5 0407-5 0407-4 0429-3 1832-7 0404-3 0402-5 0401-1 0402-5 0407-5 0407-5 0402-1 0420-7 0413-3 0403-1 0404-9 0403-1 0403-1 0403-1 0404-3 0402-5 0402-2 0402-5 0413-3 0416-2 0420-3 0420-3 0404-5 0433-1 0420-5 0420-5 0420-3 0404-7 0420-5 0420-5 0413-3 0413-3 0413-3 0413-3 0413-3 0413-3 0420-7 0403-1 0404-9 0414-1 0420-3 0402-5 0402-5 0452-3 0420-3 0420-5 0420-3 0420-3 0420-5 0420-3 0420-5

PART NO.

KEY

RE517370 RE518089 RE518527 RE519144 RE519144 RE519696 RE519696 RE52034 RE520540 RE520909 RE521519 RE521822 RE521823 RE521824 RE521825 RE522076 RE522109 RE52242 RE522529 RE52346 RE52454 RE52454 RE524676 RE52506 RE52507 RE52508 RE52509 RE526282 RE526319 RE526673 RE526834 RE526965 RE52722 RE527301 RE531116 RE532629 RE54885 RE55423 RE56369 RE56369 RE56690 RE57489 RE57575 RE57836 RE57836 RE57836 RE59355 RE59438 RE59579 RE59579 RE59810 RE59810 RE60005 RE60029 RE60071 RE60854 RE60854 RE60854 RE61812 RE65165 RE65168 RE65908 RE65909 RE65911 RE65912 RE65978 RE66153

4 13 1 1 7 9 2 1 6 1 8 13 13 13 13 7 13 1 3 24 1 4 2 2 1 6 1 12 6 17 4 33 3 .. 28 3 12 1 29 14 2 14 22 11 25 15 2 15 3 3 24 19 3 11 7 15 3 5 1 7 10 11 11 7 10 13 1

PAGE

0402-5 0413-3 0404-7 0402-5 0578-1 0420-3 0578-2 2163-3 0402-3 0420-7 0420-7 0413-3 0413-3 0413-3 0413-3 0418-3 0413-3 0407-5 0575-2 0402-5 1832-7 1832-8 0505-5 1832-8 1832-10 1832-8 1832-9 0420-3 0420-3 0452-1 0420-5 0452-3 0578-1 0403-1 0413-3 0575-2 0416-2 1832-8 0402-5 0404-5 0419-3 0409-3 1831-9 0131-3 0404-3 0409-3 0429-1 0416-2 1831-5 1831-7 0402-5 0452-3 0409-3 0420-7 0414-1 0420-3 0420-5 0420-5 0578-1 0401-1 0401-1 0403-1 0403-1 0401-1 0401-1 0416-2 0421-1

PART NO.

KEY

RE67231 RE67238 RE67238 RE67239 RE68748 RE69568 RE70535 RE70678 RE70682 RE70756 RE71256 R100369 R100377 R10093 R101225 R104592 R104592 R104919 R104919 R105812 R107731 R110531 R111137 R11151 R11151 R11151 R111632 R113050 R113050 R113050 R113562 R113562 R113563 R113563 R113565 R113565 R113565 R114193 R114193 R114194 R114241 R114358 R115149 R115150 R115250 R115742 R115743 R116115 R116296 R116386 R116386 R116466 R116516 R116516 R116516 R119874 R120013 R120467 R120631 R120636 R120638 R120641 R120653 R120653 R120653 R120653 R121043

1 1 11 7 24 8 9 3 4 10 5 14 1 13 16 24 5 8 1 19 10 10 27 4 4 4 10 20 10 5 3 15 4 14 5 6 16 28 13 15 1 12 3 4 1 3 7 5 2 17 15 14 12 8 8 15 14 1 3 14 3 5 5 1 6 7 10

700J CRAWLER DOZER (S.N. -139435)

PAGE

0419-3 0407-1 0419-3 0402-5 0413-3 0407-4 0429-3 0422-3 0422-3 0422-3 0422-3 0402-5 0423-3 1832-3 0404-5 0404-3 0409-3 0420-3 0578-2 1115-5 0402-2 0414-1 0404-3 3215-3 3262-5 3262-7 1676-3 1831-9 1832-3 1832-5 0420-3 0420-5 0420-3 0420-5 0420-3 0420-3 0420-5 0402-5 0404-5 0404-5 0404-3 0407-5 0201-3 0201-3 0417-1 1832-8 1832-8 0407-5 0407-1 0404-5 0413-3 0404-3 0409-3 0452-1 0452-3 0404-3 0416-2 0408-3 0401-1 0404-5 0407-4 0404-5 1814-5 1814-7 1814-9 1814-9 0404-3 PC9473

(13-APR-07) PN=414


00II-7 700J CRAWLER DOZER (S.N. -139435)

NUMERICAL INDEX - CONTINUED PART NO.

KEY

R121376 R121411 R121424 R121608 R121635 R121674 R121897 R123174 R123178 R123226 R123226 R123226 R123226 R123271 R123273 R123273 R123323 R123324 R123345 R123345 R123354 R123354 R123354 R123417 R123417 R123471 R123501 R123501 R123514 R123525 R123543 R123543 R123562 R123563 R123564 R123565 R123570 R123570 R123570 R123572 R123572 R123572 R123574 R123575 R123575 R123575 R123584 R123593 R123593 R123593 R123594 R123616 R123616 R123616 R123960 R128662 R128662 R130574 R130575 R130577 R131016 R131182 R131206 R131283 R131283 R131769 R132166

6 10 9 14 5 4 3 4 5 12 8 4 4 5 2 20 3 11 5 5 1 13 12 8 21 5 3 23 2 25 1 1 6 8 9 11 16 6 6 6 11 11 2 3 7 7 10 24 26 5 3 29 8 8 2 5 2 8 9 6 1 9 7 27 12 2 2

PAGE

0407-4 0402-5 0402-5 0409-3 0417-1 0402-3 0429-1 0404-5 0403-1 0402-5 0418-3 0452-1 0452-3 0402-2 0421-1 0452-3 0418-3 0418-3 0452-1 0452-3 0407-2 0452-1 0452-3 0402-5 0452-3 0419-3 0419-3 0452-3 0402-2 0452-3 0452-1 0452-3 0401-1 0401-1 0401-1 0402-2 0416-2 0452-1 0452-3 0416-2 0452-1 0452-3 0402-3 0402-3 0452-1 0452-3 0404-5 0413-3 0413-3 0420-7 0420-7 0505-9 1831-5 1831-7 0403-1 0429-3 0512-3 0401-1 0401-1 0401-1 0418-3 0404-3 0404-5 0402-5 0404-5 0433-2 0423-3

700J CRAWLER DOZER (S.N. -139435)

PC9473

PART NO.

KEY

R132167 R132186 R132262 R132518 R132656 R132874 R133295 R133303 R133405 R133978 R134240 R134518 R134527 R135509 R135510 R135757 R135918 R135918 R136052 R136052 R136082 R136475 R136495 R136495 R136515 R136516 R136516 R150986 R150997 R151062 R151063 R151065 R151066 R151067 R151067 R151069 R151072 R151075 R151078 R151088 R151090 R151097 R151097 R151099 R151103 R206883 R26125 R26375 R26375 R26375 R26375 R26448 R26448 R26448 R26448 R26448 R26448 R26448 R26627 R26650 R26773 R26773 R26773 R26906 R26906 R26906 R26906

5 1 1 11 4 18 1 1 6 11 12 2 1 1 2 2 1 6 11 .. 21 3 3 31 22 30 22 2 3 3 17 5 11 9 18 19 24 12 1 4 4 7 20 23 4 3 4 1 3 4 12 51 2 4 2 16 6 11 26 17 21 21 1 54 24 14 11

(13-APR-07)

PAGE

0423-3 0404-3 0410-1 0404-3 0407-2 0413-3 0429-1 0402-1 0421-1 0429-3 0407-2 0404-5 0404-5 0422-3 0422-3 0404-10 0433-1 0433-2 0422-3 0422-3 0420-7 0404-5 0407-1 0452-3 0452-3 0402-5 0452-3 0355-9 0355-7 0355-13 0355-13 0355-13 0355-13 0355-3 0355-11 0355-11 0355-11 0355-13 0355-9 0355-7 0355-15 0355-11 0355-11 0355-13 0355-11 0505-5 0409-3 0563-3 1062-3 3263-3 3263-9 0315-3 0363-3 0363-7 0363-13 0364-3 1062-3 2164-5 1832-3 0404-3 0363-11 0364-5 2164-3 0201-5 0363-11 0363-13 0364-5

PART NO.

KEY

R26906 R26906 R26906 R26906 R26936 R26936 R27175 R27212 R27218 R27218 R27218 R27218 R27390 R27474 R28782 R28782 R28782 R28782 R28782 R28782 R28811 R29936 R29936 R29936 R29936 R29936 R33259 R33259 R36235 R36636 R39090 R39832 R41440 R41440 R41987 R42009 R43409 R44165 R44302 R44302 R44302 R44302 R44302 R44302 R44302 R44302 R44302 R44302 R44302 R44302 R44313 R44342 R460R R46528 R46528 R47151 R48685 R48685 R48808 R500000 R500270 R500271 R500320 R500320 R500322 R500374 R500384

6 9 7 18 18 35 39 26 12 17 9 10 14 10 11 13 8 29 11 7 3 4 12 4 3 5 23 6 23 4 42 1 6 6 12 9 9 10 9 13 35 4 3 6 3 6 13 2 10 10 20 11 16 6 9 9 1 13 7 3 4 3 16 8 14 32 15

PAGE

0409-3 2163-7 2163-11 2164-3 1831-9 1832-3 3262-3 0363-13 0355-3 0355-5 0355-7 0355-7 0355-7 0407-2 0355-21 0363-7 0364-3 0563-3 1062-3 2164-5 0433-1 0363-9 0363-11 0364-3 2164-5 3262-3 1831-9 1832-5 1673-7 3262-3 0315-3 1743-7 1673-5 1673-7 0133-3 0563-3 0409-3 1831-9 0315-3 0355-23 0363-11 1673-3 1674-3 1674-5 1674-7 1814-5 1814-7 1814-9 1831-5 1831-7 1115-5 1676-3 0420-3 1811-3 1811-5 0407-2 0401-1 0404-3 1672-3 0403-1 0421-1 0421-1 0429-3 1832-7 0429-3 0452-3 0429-3

00II-7

PN=415


00II-8 700J CRAWLER DOZER (S.N. -139435)

NUMERICAL INDEX - CONTINUED PART NO.

KEY

R500384 R500384 R500385 R500385 R500385 R500390 R500390 R501124 R501144 R501195 R501373 R501373 R501428 R501428 R501436 R501472 R501486 R502014 R502076 R502079 R502079 R502175 R502287 R502329 R502346 R502504 R502687 R502725 R502811 R502814 R502814 R502814 R502864 R502943 R503452 R50406 R50406 R50406 R504192 R504725 R504725 R504730 R504734 R504734 R504850 R504948 R505121 R505142 R505472 R505601 R505609 R517471 R517471 R51936 R51936 R519767 R520130 R520130 R520132 R520132 R521439 R521439 R521439 R53108 R54123 R54477 R54477

1 17 15 1 17 28 .. 1 9 19 9 9 8 13 7 4 8 12 16 18 6 1 17 2 3 3 2 12 10 10 3 3 24 15 1 24 19 19 10 30 32 19 25 9 1 13 6 2 17 6 2 11 8 24 6 7 30 32 30 32 2 2 2 26 1 34 52

00II-8

PAGE

0512-3 1832-7 0429-3 0512-3 1832-7 0413-3 0413-3 0403-1 0418-3 0420-3 0452-1 0452-3 0419-3 0452-3 0407-5 0414-1 1672-3 0429-3 0413-3 0429-3 1832-7 0409-4 0420-7 0409-4 0407-2 0407-5 0407-4 0407-2 0419-3 0418-3 0452-1 0452-3 0452-3 0407-2 0433-2 1810-3 1810-5 1810-5B 1832-7 0402-5 0402-5 0420-7 0402-5 0419-3 0404-3 0420-3 0404-5 0433-1 0413-3 0420-5 0401-1 0401-1 0578-1 0413-3 0420-7 0402-2 0402-5 0402-5 0402-5 0402-5 0410-1 0452-1 0452-3 0452-3 0505-5 1810-3 1810-5

PART NO.

KEY

R54477 R54565 R55233 R56101 R56462 R56551 R57438 R61105 R61467 R61871 R61871 R61871 R63548 R65563 R65563 R71963 R72328 R72328 R726R R726R R72655 R72655 R73290 R73290 R73290 R73290 R73290 R74012 R75892 R75892 R76454 R76477 R77390 R77914 R77914 R77915 R78035 R78057 R78059 R79101 R79101 R79604 R79605 R81275 R81275 R81275 R81275 R81862 R81862 R81876 R81968 R81971 R83576 R83576 R85363 R85687 R89944 R89944 R90692 R91360 R91730 R91730 R91889 R92352 R93910 R94361 R96703

52 1 26 35 6 11 21 29 3 9 16 16 4 12 11 23 2 27 1 20 8 3 17 10 10 7 17 4 14 14 13 7 6 13 9 10 14 9 9 24 55 21 22 3 5 10 10 7 7 3 46 20 44 55 1 8 6 28 10 19 42 55 2 27 8 10 8

PAGE

1810-5B 0402-2 0404-3 0511-3 0407-5 0414-1 1115-5 0452-3 0433-2 0407-4 0452-1 0452-3 0416-2 3262-5 3262-7 0413-3 0408-3 0452-3 0355-13 0355-19 1821-9 1821-11 0131-3 0131-5 0131-7 0133-3 0133-5 0420-7 0452-1 0452-3 1813-5 3263-9 1832-8 1821-5 1821-15 1821-15 1676-3 1832-8 1832-8 3265-3 3265-3 0413-3 0413-3 0414-1 0414-1 0452-1 0452-3 3265-5 3265-7 0512-3 3265-5 3265-5 3265-3 3265-3 0409-3 0409-3 0417-1 0452-3 0409-3 0413-3 3265-3 3265-3 0409-3 0413-3 0409-3 3201-3 0422-3

PART NO.

KEY

R97185 R97185 R97185 R97185 R98062 R98063 R98335 R99702 R99702 R99702 SE500831 SE501103 SE501237 SE501362 SE501406 TCU14336 TT206940 TT206940 TT207136 TT207136 TY15733 TY16004 TY16005 TY22328 TY22328 TY22328 TY22328 TY22328 TY22328 TY22462 TY22462 TY22462 TY22464 TY22470 TY22470 TY22472 TY22485 TY22489 TY22566 TY22566 TY24443 TY26045 TY6128 TY6304 T101172 T101807 T101975 T102136 T102136 T102171 T102419 T102780 T102780 T103461 T10510 T106955 T107114 T107115 T11234 T11234 T114681 T118385 T118385 T118685 T118685 T118685 T118808

19 5 15 15 11 8 8 14 1 3 28 28 13 6 11 12 79 59 79 59 8 1 2 1 5 1 5 11 12 9 16 15 19 19 2 5 1 11 8 34 11 6 8 .. 3 2 30 12 24 23 26 18 27 10 16 14 12 20 22 4 12 12 8 6 21 14 18

700J CRAWLER DOZER (S.N. -139435)

PAGE

0404-3 0407-4 0452-1 0452-3 0409-3 0409-3 0409-3 0355-3 2161-3 2161-5 0413-3 0413-3 0413-3 1672-3 0422-3 1813-3 1810-5B 1810-7 1810-5B 1810-7 1671-3 1369-1 1369-1 1831-5 1831-5 1831-7 1831-7 1831-7 1831-7 0505-3 0505-9 0563-3 0563-3 0511-3 3263-3 3263-9 2163-3 0521-3 0505-3 0511-3 0422-3 1672-3 1671-3 0452-3 3243-3 1811-7 3265-3 1743-3 3243-3 3243-3 0363-11 1673-5 1673-7 0564-3 3201-3 0132-5 1671-3 1671-3 1115-5 1810-13 1322-5 1921-5 3263-9 3262-3 3262-5 3262-7 3262-3 PC9473

(13-APR-07) PN=416


00II-9 700J CRAWLER DOZER (S.N. -139435)

NUMERICAL INDEX - CONTINUED PART NO.

KEY

T118808 T118808 T119816 T119915 T119916 T120720 T121239 T121478 T122075 T122075 T125572 T125615 T126814 T127575 T13213 T133674 T134895 T134895 T135764 T135764 T137908 T139636 T14050 T140608 T141123 T142434 T143169 T146097 T146097 T146097 T146097 T146098 T146099 T146102 T146104 T146106 T146182 T146183 T146184 T148409 T148409 T148410 T148411 T148643 T148917 T149247 T149248 T149248 T149292 T149315 T149361 T149597 T149597 T149597 T151427 T151427 T151711 T151711 T151711 T151711 T151959 T151994 T152076 T152122 T152122 T152122 T152178

28 26 16 23 24 23 31 15 4 30 10 10 2 4 8 30 3 3 2 8 28 4 14 15 11 3 22 13 10 25 25 1 10 9 18 2 4 25 23 40 40 17 17 14 7 12 11 11 4 4 11 2 2 13 11 29 14 5 24 24 10 10 2 2 2 8 7

PAGE

3262-5 3262-7 0563-3 1115-5 1115-5 0133-9 3262-3 0132-5 0419-3 0452-3 0133-3 0133-5 3201-3 1322-5 0407-2 3215-3 1810-5 1810-7 1814-7 1814-9 3265-3 0133-9 0420-7 1115-3 1671-3 2001-3 1832-3 1322-3 1810-3 1810-5 1810-5B 1322-5 1322-5 0422-3 1322-5 1322-5 1322-3 1322-5 1322-5 1810-5 1810-5B 1741-3 1741-3 1912-3 1832-5 0132-3 0132-3 0133-3 0132-3 0363-5 0133-5 1831-5 1831-7 2163-7 1921-5 3263-9 1322-3 1810-3 1810-5 1810-5B 0563-3 1741-3 0131-11 1511-3 1511-5 1511-7 0132-3

700J CRAWLER DOZER (S.N. -139435)

PC9473

PART NO.

KEY

T152178 T152230 T152230 T152230 T153420 T154809 T154809 T15509 T155559 T155560 T155561 T155640 T155641 T155677 T155694 T155694 T155729 T155731 T155732 T155735 T155736 T155737 T155741 T155757 T155964 T155975 T155987 T156000 T157172 T157172 T157172 T157172 T157251 T158127 T158241 T158583 T158584 T158588 T158589 T158619 T159875 T159875 T159945 T159946 T160017 T161296 T161816 T162012 T162396 T162854 T163113 T163309 T163334 T163334 T163335 T163335 T163336 T163336 T163339 T163344 T163394 T164263 T164318 T164365 T16464 T16464 T16464

8 26 21 21 25 2 1 2 14 14 14 16 15 13 7 7 5 4 7 23 25 26 13 22 6 2 21 5 16 11 26 26 13 19 3 23 9 26 24 6 14 3 12 10 8 36 16 1 19 15 16 39 9 1 10 2 1 11 3 4 9 2 21 2 21 64 64

(13-APR-07)

PAGE

0132-3 1810-3 1810-5 1810-5B 1115-5 2163-3 2163-9 0355-11 0132-5 0132-5 0132-5 0355-11 0355-11 0355-5 0355-3 0355-5 0355-19 0355-21 0355-19 0355-21 0355-21 0355-21 0355-21 0355-21 0355-5 0355-23 0355-21 0355-5 1322-3 1810-3 1810-5 1810-5B 1743-3 1831-9 0355-21 0364-5 1672-3 1322-5 1322-5 1511-7 1814-7 1814-9 1810-7 1810-7 1813-3 0511-3 1671-3 0355-19 3265-5 0355-21 0521-3 1832-3 1821-9 1821-11 1821-9 1821-11 1821-9 1821-9 1821-9 1821-9 1821-27 1674-3 0355-19 0355-15 1810-3 1810-5 1810-5B

PART NO.

KEY

T16464 T165492 T165535 T165535 T165536 T167226 T167841 T168219 T169107 T169108 T169109 T169116 T170935 T170935 T171686 T171686 T171686 T171737 T171778 T171778 T172763 T173311 T173580 T174191 T174326 T174327 T174447 T174490 T174515 T174600 T174600 T174600 T174722 T174731 T174740 T174841 T174975 T175002 T175002 T175102 T175239 T175244 T175278 T175296 T175361 T175361 T175361 T175376 T175376 T175390 T175549 T175550 T175551 T175615 T175617 T175674 T175748 T175773 T175823 T175824 T175828 T175866 T175866 T175900 T175963 T176000 T176009

11 9 19 4 31 1 43 1 44 38 48 51 22 2 3 3 3 11 4 6 1 .. 3 8 22 21 7 1 4 16 30 30 40 37 38 2 1 12 6 14 26 3 18 26 20 13 22 8 2 2 10 34 36 8 20 6 1 15 4 5 5 11 12 19 7 18 15

PAGE

1821-5 0355-21 0355-21 0355-23 0355-21 0355-5 0201-5 1115-3 0201-5 0201-5 0201-5 0201-5 0364-5 2164-3 1821-3 1821-13 1821-23 1811-3 1811-3 1811-5 1810-11 0404-3 1671-3 0363-5 0201-3 0201-3 0201-3 1810-7 2161-3 1810-3 1810-5 1810-5B 3262-3 0511-3 0511-3 1810-9 0201-3 0364-3 2164-5 0132-5 0511-3 1810-9 3201-3 0355-3 0364-5 1912-3 2164-3 0355-3 0355-7 0133-9 0201-3 0201-3 0201-5 0201-3 0201-3 1813-3 1814-3 0131-3 1743-5 1743-5 0133-9 1673-5 1673-7 0133-9 1810-7 3201-3 3263-5

00II-9

PN=417


00II-10 700J CRAWLER DOZER (S.N. -139435)

NUMERICAL INDEX - CONTINUED PART NO.

KEY

T176064 T176091 T176136 T176137 T176143 T176144 T176145 T176146 T176147 T176148 T176149 T176150 T176152 T176154 T176155 T176157 T176158 T176168 T176169 T176170 T176171 T176172 T176173 T176201 T176240 T176241 T176242 T176243 T176244 T176245 T176249 T176252 T176253 T176254 T176256 T176257 T176258 T176259 T176260 T176261 T176262 T176268 T176268 T176269 T176269 T176270 T176270 T176296 T176296 T176360 T176360 T176383 T176444 T176473 T176522 T176523 T176524 T176571 T176572 T176586 T176644 T176696 T176721 T176745 T176753 T176756 T176762

2 2 4 31 60 61 55 54 47 48 34 35 41 45 53 38 63 21 19 22 23 18 20 1 23 24 6 13 14 15 18 17 16 19 20 21 19 18 22 27 5 47 47 47 47 50 50 39 39 20 11 10 6 1 10 11 12 13 1 31 12 32 3 1 22 27 1

00II-10

PAGE

1743-3 0131-3 0315-3 0315-3 0315-3 0315-3 0315-3 0315-3 0315-3 0315-3 0315-3 0315-3 0315-3 0315-3 0315-3 0315-3 0315-3 0315-3 0315-3 0315-3 0315-3 0315-3 0315-3 1921-3 0355-3 0355-3 0355-13 0355-13 0355-13 0355-13 0355-7 0355-7 0355-7 0355-7 0355-13 0355-13 0355-13 0355-13 0355-13 0355-13 0355-11 1810-5 1810-5B 1810-5 1810-5B 1810-5 1810-5B 1810-5 1810-5B 3201-3 3243-3 0355-21 1927-5 1813-5 1810-9 1810-9 1810-9 0131-3 0131-3 0201-3 3263-5 3243-3 0133-7 0133-7 0131-3 0133-9 0133-9

PART NO.

KEY

T176764 T176777 T176777 T176818 T176818 T176820 T176863 T176863 T176876 T176877 T176878 T176878 T176879 T176879 T176888 T176903 T176904 T176958 T176958 T176958 T176958 T176959 T176979 T176988 T176988 T177000 T177000 T177028 T177029 T177030 T177074 T177075 T177076 T177108 T177111 T177132 T177138 T177148 T177155 T177168 T177169 T177171 T177172 T177179 T177196 T177197 T177198 T177199 T177209 T177226 T177227 T177228 T177261 T177261 T177265 T177307 T177308 T177309 T177313 T177330 T177364 T177365 T177385 T177506 T177523 T177524 T177525

15 15 9 41 41 10 11 11 16 19 21 4 20 5 57 1 2 37 68 68 5 6 2 8 12 3 10 22 25 20 33 33 33 11 13 28 18 14 11 30 2 25 6 4 8 16 9 17 12 21 20 24 26 4 14 3 12 8 9 6 2 3 27 9 30 31 32

PAGE

0133-9 1814-7 1814-9 1810-5 1810-5B 2001-3 0131-5 0131-7 1814-7 1814-7 1814-7 1814-9 1814-7 1814-9 1810-5 1810-3 1810-3 1810-3 1810-5 1810-5B 1814-3 1814-3 0132-3 3201-3 3243-3 3201-3 3243-3 3243-3 3243-3 3243-3 0201-3 0201-3 0201-3 3201-3 3201-3 3263-9 3215-3 0201-3 0355-23 1831-9 1810-5 1831-9 1831-9 1814-3 1322-5 1322-5 1322-5 1322-5 3201-3 1832-3 1832-3 1832-3 1673-5 1673-7 0132-5 0133-9 0133-9 0133-9 0133-9 1822-3 1814-3 1814-3 0201-3 3215-3 0505-9 0505-9 0505-9

PART NO.

KEY

T177548 T177550 T177551 T177568 T177575 T177580 T177594 T177595 T177597 T177602 T177603 T177604 T177605 T177614 T177673 T177781 T177788 T177796 T177818 T177833 T177847 T177847 T177847 T177849 T177859 T177859 T177864 T177865 T177876 T177878 T177890 T177890 T177890 T177890 T177973 T178007 T178008 T178009 T178021 T178024 T178075 T178076 T178085 T178166 T178263 T178264 T178265 T178266 T178268 T178297 T178362 T178425 T178439 T178472 T178472 T178472 T178472 T178473 T178474 T178477 T178478 T178497 T178498 T178533 T178580 T178665 T178724

11 12 13 16 33 34 26 11 1 43 44 37 36 13 35 3 1 14 1 3 23 14 22 19 1 8 20 21 14 16 17 12 27 27 1 28 28 28 14 21 45 47 7 36 29 29 57 42 49 6 28 14 39 18 13 34 34 21 22 22 22 1 1 7 13 46 2

700J CRAWLER DOZER (S.N. -139435)

PAGE

0201-3 0201-3 0201-3 1810-5 0505-9 0505-9 0355-13 0355-11 0355-11 0315-3 0315-3 0315-3 0315-3 0540-3 3243-3 0132-7 0132-7 0132-5 1749-3 1673-3 3262-3 3262-5 3262-7 3262-3 0132-3 0132-3 0133-9 0133-9 0133-9 0133-9 1322-3 1810-3 1810-5 1810-5B 1822-3 0201-3 0201-3 0201-3 0131-3 1673-5 0201-5 0201-5 0133-9 3243-3 0201-3 0201-3 0201-5 0201-5 0201-5 0133-11 3215-3 1811-3 0511-3 1322-3 1810-3 1810-5 1810-5B 1322-5 1322-5 3262-3 3262-3 1911-3 1911-3 0564-3 0133-9 1810-5 1814-5 PC9473

(13-APR-07) PN=418


00II-11 700J CRAWLER DOZER (S.N. -139435)

NUMERICAL INDEX - CONTINUED PART NO.

KEY

T178726 T178726 T178767 T178768 T178871 T178901 T179073 T179167 T179167 T179254 T179306 T179322 T179350 T179467 T179483 T179504 T179528 T179549 T179584 T179637 T179638 T179639 T179671 T179675 T179732 T179761 T179875 T179907 T179923 T180042 T180047 T180050 T180051 T180080 T180150 T180231 T180374 T180379 T180379 T180548 T180549 T180584 T180651 T180726 T180751 T180755 T180755 T181070 T181071 T181217 T181668 T181801 T182582 T182582 T182625 T182632 T183756 T183756 T186793 T186793 T186793 T187884 T187884 T188306 T188306 T188306 T188560

10 3 63 3 35 36 18 3 2 8 37 2 13 38 41 1 4 5 3 11 12 8 42 41 13 4 13 2 4 14 6 25 14 14 7 5 4 7 7 25 26 37 7 4 1 23 8 7 18 16 16 8 20 5 17 3 30 28 20 28 28 26 24 17 11 12 13

PAGE

0355-3 0355-11 0315-3 0315-3 0505-9 0505-9 0133-9 1821-5 1821-15 0521-3 0505-9 0133-7 3243-3 0505-9 0505-9 0521-3 1927-5 1927-3 1921-3 0355-5 0355-5 0355-5 0505-9 0201-5 1810-9 2001-3 1741-3 1807-3 1807-3 1921-3 1810-15 2164-3 0132-5 1741-3 0540-3 1671-3 3201-3 0355-3 0355-5 0201-3 0201-3 0201-5 2161-5 1911-5 1807-3 1322-3 1810-7 0131-3 0131-3 1831-3 1115-3 3263-3 0131-3 0131-11 1115-3 1115-3 3262-5 3262-7 1810-3 1810-5 1810-5B 3262-5 3262-7 0355-19 0355-23 0355-23 1832-7

700J CRAWLER DOZER (S.N. -139435)

PC9473

PART NO.

KEY

T18891 T190502 T190503 T196319 T197300 T197300 T200765 T201520 T201606 T201606 T201606 T20168 T20168 T201702 T201706 T201712 T202551 T20314 T20316 T203194 T203442 T203442 T203473 T203512 T203865 T204071 T204128 T204422 T204487 T204576 T204577 T204599 T204691 T204691 T204691 T204966 T204967 T204968 T204969 T204970 T205160 T205205 T205289 T205289 T205289 T205499 T205726 T205901 T205902 T207060 T207189 T207191 T207451 T20758 T207993 T207994 T208406 T208406 T208406 T208406 T208406 T208406 T208582 T208583 T208700 T208700 T208918

16 12 3 9 8 21 3 2 25 22 22 10 22 10 7 15 4 4 3 8 70 70 21 23 2 10 10 6 26 11 11 18 27 38 38 12 13 14 15 16 25 25 28 42 42 33 29 19 20 39 5 6 1 1 6 6 5 6 12 13 10 11 28 29 5 30 65

(13-APR-07)

PAGE

0404-3 0355-21 0355-23 0540-3 0364-5 2164-3 0355-15 1115-3 1810-3 1810-5 1810-5B 0133-9 0404-3 1322-3 1322-5 1322-5 1673-3 0402-2 0402-2 0563-3 1810-5 1810-5B 0133-5 1810-7 0132-3 0315-3 1062-3 0363-7 1115-5 1813-3 1813-3 1813-3 1810-3 1810-5 1810-5B 0133-5 0133-5 0133-5 0133-5 0133-5 1813-3 1813-3 1810-3 1810-5 1810-5B 1813-3 1810-3 1813-3 1813-3 1832-3 1322-3 1322-3 0132-7 0404-10 3201-3 3201-3 1673-3 1673-3 1673-5 1673-5 1673-7 1673-7 1673-5 1673-5 3201-3 3243-3 1810-7

PART NO.

KEY

T208937 T209860 T209860 T209860 T209860 T209917 T209995 T210101 T210102 T210103 T210105 T210106 T210217 T210385 T210386 T210413 T210494 T210494 T210495 T210496 T210496 T210497 T210500 T210501 T210502 T210503 T210527 T210591 T210591 T210774 T210774 T210774 T210774 T210843 T211010 T211078 T211079 T211336 T211337 T211338 T211381 T211382 T211391 T211392 T211532 T211532 T211532 T211727 T211729 T211947 T212047 T212049 T213861 T213861 T213861 T213861 T213866 T213867 T213889 T214209 T214230 T214238 T214242 T214596 T216631 T216631 T216870

66 21 33 61 61 17 15 14 27 29 28 31 9 32 33 7 6 7 15 6 7 29 30 18 27 28 5 44 44 22 9 36 36 7 2 13 14 24 25 26 5 13 27 28 11 7 4 8 9 5 19 19 19 8 20 74 6 14 6 7 3 8 9 39 46 46 7

PAGE

1810-7 1322-3 1810-3 1810-5 1810-5B 1676-3 1676-3 1813-3 1813-3 1813-3 1813-3 1813-3 1115-3 0355-21 0355-21 1813-3 0355-23 0355-23 0355-23 0355-23 0355-23 0355-21 0355-21 0355-19 0355-21 0355-21 0355-5 1810-5 1810-5B 1322-3 1810-3 1810-5 1810-5B 1322-3 2163-7 1741-3 1741-3 1322-3 1322-3 1322-3 1322-5 1322-5 1322-5 1322-5 1322-3 1674-5 1674-7 1322-3 1322-3 1807-3 3201-3 3201-3 1322-3 1810-3 1810-5 1810-5B 1322-5 1322-5 1807-3 1807-3 0564-3 1807-3 1807-3 0201-5 1810-5 1810-5B 3201-3

00II-11

PN=419


00II-12 700J CRAWLER DOZER (S.N. -139435)

NUMERICAL INDEX - CONTINUED PART NO.

KEY

T217101 T217102 T217327 T217916 T217919 T218063 T218435 T218457 T218457 T218570 T222125 T222125 T223395 T223395 T223395 T223467 T223519 T223520 T223607 T223612 T224178 T224179 T225284 T226424 T226424 T226427 T226430 T227018 T227019 T228553 T228554 T230113 T230131 T230132 T230142 T23474 T24199 T24652 T26257 T26955 T27550 T28949 T29342 T29342 T29342 T29342 T29969 T30637 T34530 T35580 T35580 T35986 T38489 T41770 T42199 T45097 T45099 T47858 T49337 T55207 T55210 T55222 T55224 T58056 T58477 T58920 T59014

19 18 75 7 7 76 77 16 78 11 9 18 6 7 16 39 6 6 6 3 18 18 6 7 7 15 17 2 3 1 1 4 25 23 6 23 8 10 40 43 17 13 4 11 5 2 7 17 9 8 21 12 52 44 6 16 14 17 6 2 2 8 1 38 6 6 13

00II-12

PAGE

0133-5 0133-5 1810-5B 3201-3 3201-3 1810-5B 1810-5B 1810-5 1810-5B 0355-23 0355-3 0355-11 0355-23 0355-23 0355-23 3215-3 3201-3 3201-3 0355-13 0355-7 3201-3 3201-3 1807-3 0355-3 0355-5 1676-3 1676-3 1814-3 1814-3 1911-3 1911-3 1322-3 1322-5 1322-5 0363-7 0404-3 0355-13 0564-3 0315-3 0505-9 1832-3 1674-9 0540-3 1741-3 2161-3 2161-5 0563-3 0315-3 3263-5 0355-11 0355-11 1115-5 0201-5 0505-9 1671-3 0132-5 0132-5 0133-3 1743-5 1821-9 1821-7 1821-7 1821-25 1810-3 0409-3 1813-5 0355-7

PART NO.

KEY

T60811 T60828 T61861 T62323 T63224 T63225 T63798 T63817 T64769 T64769 T70286 T70316 T70317 T70622 T71386 T71570 T71570 T72570 T72570 T73607 T74412 T74416 T74416 T75197 T76252 T76697 T76938 T76938 T76938 T76938 T76938 T76938 T76938 T77170 T77613 T77613 T77613 T77613 T77613 T77814 T77814 T77857 T77857 T77857 T77857 T77857 T77857 T77857 T77857 T77857 T77857 T77858 T77858 T77858 T77858 T77932 T77932 T77932 T77932 T77932 T77932 T78313 T78313 T78497 T78593 T78612 T78716

3 14 13 45 11 3 3 9 12 17 17 3 5 2 7 1 1 15 10 10 28 14 17 15 29 16 7 5 13 3 3 5 36 15 3 8 3 27 7 7 31 14 4 8 17 13 6 16 3 10 3 14 21 6 12 56 25 15 7 14 12 9 2 28 6 6 18

PAGE

2163-11 0132-5 3263-5 0505-9 1322-5 1322-5 1821-7 1821-25 0355-7 0355-11 3201-3 0132-3 0132-3 0133-3 1673-3 3262-5 3262-7 0355-5 0355-19 0132-3 1832-3 1674-9 1814-7 1674-9 1832-3 1674-9 0363-5 0363-9 0363-11 0364-3 2163-7 2164-5 3262-3 0201-3 0363-3 0416-2 0563-3 0563-3 1062-3 0363-7 0563-3 0364-5 1062-3 2163-11 2164-3 3262-3 3263-3 3263-5 3263-7 3263-9 3263-11 0363-11 0363-13 0364-3 3262-3 0201-5 0363-11 0363-13 2163-7 3262-3 3263-3 0363-5 2163-5 0505-9 0505-3 0363-9 3263-5

PART NO.

KEY

T78716 T78716 T78716 T78784 T78787 T78974 T78974 T81538 T81538 T81538 T81539 T81539 T81539 T81540 T81540 T81540 T81899 T83426 T83426 T83426 T83426 U12547 U12547 U12547 U12547 U12547 U13639 U13639 U13639 U13639 U13639 U15973 U15980 U15980 U43021 U44115 U44115 U44115

4 16 5 22 8 17 12 41 23 20 42 22 19 21 25 23 7 12 12 20 2 42 18 5 10 2 5 5 46 9 9 16 32 18 31 14 7 8

700J CRAWLER DOZER (S.N. -139435)

PAGE

3263-7 3263-9 3263-11 0363-11 1674-5 1674-9 1832-7 3262-3 3262-5 3262-7 3262-3 3262-5 3262-7 3262-3 3262-5 3262-7 1743-5 0131-5 0131-7 0133-5 1511-7 0363-11 0363-13 2163-7 3262-3 3263-11 0404-3 0505-5 0505-9 1831-5 1831-7 0201-3 0315-3 1115-3 1810-3 0363-7 0364-3 2164-5

PC9473

(13-APR-07) PN=420



Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.