PDF DOWNLOAD MASCHIO GASPARDO OLIMPIA ORIETTA-C PARTS MANUAL G19530932 by www.heydownloads.com

MASCHIO GASPARDO S.p.A. *)

OLIMPIA ORIETTA-C Cod:

G19530932

2011-08

IT EN

*) Valido per Paesi UE *) Valid for EU member countries *) Valable dans les Pays UE *) Gilt für EU-Mitgliedsländer *) Válido para Países UE

DE FR ES

PARTI DI RICAMBIO SPARE PARTS ERSATZTEILE PIECES DÉTACHÉES PIEZAS DE REPUESTO

ITALIANO

ENGLISH

DEUTSCH

FRANÇAIS

ESPAÑOL

PARTI DI RICAMBIO

SPARE PARTS

ERSATZTEILE

PIECES DÈTACHÈES

RESPUESTOS

Le ordinazioni delle parti di ricambio vanno fatte presso i nostri concessionari di zona e devono essere sempre corredate dalle seguenti indicazioni:

Orders must be transmitted through our area dealers and should always include the following indications:

Die Bestellungen müssen bei unseren Gebietshändrer aufgegeben werden. Bei der Bestellung sind stets die folgenden Angaben zu machen:

Les ordres doivent être effectués auprés de nos concessionaires de zone en précisant les indications suivantes:

Los pedidos han de efectuarse en nuestros consesionarios de zona y deben incluir siempre las siguientes indicaciones:

- Tipo, modello e numero di matricola dell’attrezzatura. Tali dati sono stampigliati nell’apposita targhetta di cui è dotata ogni attrezzatura.

- Type, model and serial number of the machine. These data are punched on the data plate with which every implement is equipped.

- Typ, Modell und Serien-Nummer des Geräts. Diese Daten stehen auf dem Typenschild, mit dem jedes Gerät versehen ist.

- Type, modéle et numéro de série de la machine. Ces données sont gravées sur la plaque d’identification de chaque outil.

- Tipo, modelo y número de matrícula del equipo. Dichos datos están impresos en la relativa placa presente en el equipo.

- Numero di codice della parte richiesta rilevabile dal catalogo ricambi.

- Code number of the required spare part. This will be found in the spare parts catalogue.

- Artikel Nr. der erforderlichen Ersatzteile. Diese stehen im Ersatzteil-Katalog.

- Numéro de code de la piéce détachée indiqué sur le catalogue des piéces détachées.

- Número de código de la parte requerida presente en el catálogo respuestos.

- Descrizione del particolare e quantità richiesta.

- Description of the part and required quantity.

- Beschreibung des Ersatzteils und die erforderliche Stückzahl.

- Description de la piéce et quantité requise.

- Descripcíon de la pieza y cantidad requerida.

Numero della tavola.

Table number.

Tafelnummer.

Numéro de plan.

Numero de illustración.

- Mezzo di trasporto. Nel caso questa voce non sia specificata, la Ditta Costruttrice, pur dedicando a questo servizio una particolare cura, non risponde di eventuali ritardi di spedizione dovuti a cause di forza maggiore. Le spese di trasporto si intendono sempre a carico del destinatario. La merce viaggia a rischio e pericolo del committente anche se venduta franco destino.

- Means of dispatch. If this item is not indicated, the Manufacturer, while dedicating particular care to this service, shall not be held responsible for delays in delivery caused by cases of force majeure. Transport expenses shall always be at the consignee’s charge. The goods travel at the purchaser’s risk and peril even when sold ex destination.

- Versandmittel. Wenn dieser Punkt nicht spezifiziert wird, haftet die Herstellerfirma nicht für etwaigen Lieferverzug aufgrund höherer Gewalt, auch wenn er diesen Service besonders aufmerksam abwickelt. Die Frachtkosten gehen dagegen immer zu Lasten des Empfängers. Die Ware reist auf Gefahr und Risiko des Auftraggebers, auch wenn frei Haus Verkauft vereinbart worden ist.

- Moyen d’expédition. Si cette rubrique n’est pas indiquée, le Constructeur, bien que soucieux de ce service, ne répond pas des retards d’expédition pour des causes de force majeure. Les frais de transport sont toujours à la charge du destinataire. La marchandise voyage aux risques et périls de l’acheteur même si vendue franco de port.

- Medio de transporte. En caso que este ítem no esté especificado, el Fabricante, aún prestando la debidas consideraciones para este aspecto, no responde por eventuales retardos de env’o debidos a causas de fuerza mayor. Los gastos de transporte se consideran siempre a cargo del destinatario. La mercandería viaja bajo riesgo y peligro del comprador, incluso cuando se vende franco destino.

NOTA: Il termine (Dx) Destro o (Sx) Sinistro della macchina o di parti di essa, è inteso guardando la macchina dalla parte posteriore. Le eccezioni saranno indicate.

NOTE: The symbols (Dx) right and (Sx) left, concerning the machine or single parts of it, are referred, as in the figure, to a rear view of them. Exceptions will be indicated.

N.B.: Die Merkzeichen (Dx) rechts und (Sx) links betreffen eine rückwärtige Aussicht der Maschine oder Teile von ihr (siehe Bild). Ausnahmen werden gezeigt.

N.B.: Les références (Dx) droit et (Sx) gauche de la machine ou des parties de la même, est entendue, comme de la figure, en regardant la machine de derriere dans le sens de marche.

N.B.: La refencia (Dx) derecha o (Sx) izquierda de la máquina o de sus componentes, se entiende, como en la figura, mirando la máquina por la parte trasera. Se indicarán las excepciones.

cod. G19530932

(1)

(2)

ORIETTA-C (3)

OLIMPIA (4)

cod. G19530932

Nr. Tav.

Descrizione - Description

(1)

TAV. 011 TAV. 021 TAV. 032 TAV. 042 TAV. 051

Telaio ed attacco 3 punti .......................................................... 4 Segnafile ................................................................................... 6 Segnafile rinforzato ................................................................... 8 Comando segnafile oleodinamico .............................................. 10 Comando segnafile meccanico ................................................. 12

(2)

TAV. 271 TAV. 281 TAV. 291 TAV. 311

Telaio pieghevole ....................................................................... 14 Impianto telaio pieghevole ......................................................... 16 Segnafile per telaio pieghevole .................................................. 18 Impianto segnafile per telaio pieghevole ..................................... 20

(3)

TAV. 091 TAV. 101 TAV. 112 TAV. 122 TAV. 132

Distributore semi ....................................................................... 22 Telaio elemeto ........................................................................... 24 Falcioni assolcatori ................................................................... 28 Bilanciere e ruote di compressione ........................................... 30 Ruotini di compressione ............................................................ 32

(4)

VARIANTI OLIMPIA TAV. 231 Elemento seminatore «N» ......................................................... 34 TAV. 330 Elemento seminatore «W» ........................................................ 38 TAV. 242 Ruote e ruotini di compressione ................................................ 40 TAV. 062 TAV. 071 TAV. 081 TAV. 141 TAV. 151 TAV. 181 TAV. 191 TAV. 201 TAV. 210 TAV. 221 TAV. 251 TAV. 321 TAV. 260

Pag.

Depressore ............................................................................... 42 Impianto aspirazione e soffiaggio .............................................. 46 Ruota di trasmissione ............................................................... 48 Supporti serbatoi spandiconcime plastica ................................. 52 Serbatoi spandiconcime plastica .............................................. 54 Microgranulatore ....................................................................... 58 Trasmissione spandiconcime e microgranulatore ...................... 62 Concimazione pneumatica ........................................................ 64 Speedy set ............................................................................... 66 Rullo anteriore ........................................................................... 68 Accessori ................................................................................. 70 Cardani ..................................................................................... 72 Dischi di semina ....................................................................... 74

TAV. 011 5

6 7

1 2 3

8 9

6 16 - 150x100x 1900 17 - 150x100x 2480 18 - 150x100x 3200 19 - 150x100x 4200 20 - 150x100x 2750 11 28

10 12

15 - M14 x 160 21 - M14 x 220

13 22 14

24 - 150x150x 5000 25 - 150x150x 6000 26 - 150x150x 7500 23

cod. G19530932

TELAIO ED ATTACCO TERZO PUNTO Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

F20120400 G65336004 F01410088 G16610462 G13812311 F02200507 F20100133 G20970120 F20100136 G15112711 F01200306 F02200246 F02200584 G10710032 F01020225 G16610040 G16610050 G14217400 G16610070 G16610080 F01020236 G15110091 G16610110 G15210690 G15210740 G15211790 G19003000 G20970142

TAV. 011

Descrizione

Description

Benennung

Descripcion

GANCIO SOSTEGNO CARDANO MOLLA SPEC.ZN AGG.SEMINAT. SP ROS.M14 15X 28X2,5 U6592 ZN ASS.TERZO PUNTO 2 CATEGORIA CATENELLA CON MOSCHETTONE SPINA SCATTO D. 9 B/83 ZN PERNO D25 L122 C43 ZN RONDELLA 70X8X28,5 >PERNO D28 L109 C43 ZN SUPPORTO PUNTELLO DADO M14X 2 U5588 6.8 ZN COPIGLIA 6X 45 U1336 ZN SPINA SICUR. D. 12X70 ZN PUNTELLO VITE M14X2X160 U5737 8.8 BR TUBO RET.150X100X1900 TUBO R.150X100X2480 TUBO TELAIO 150X100X3200 TUBO R.150X100X4200 TUBO R.150X100X 6X2750 VITE M14X2X220 U5737 8.8 BR SCONTRO A U TAPPO TELAIO 150X100 COMPL. TUBO TELAIO FISSO 150X5000 TUBO TELAIO FISSO 150X6000 TUBO TELAIO FISSO L.7500 Q.150 TAPPO PER TELAIO 150 RONDELLA 32X4X15,5

SHAFT HOOK SUPPORT SPEC SPRING- ZN ADD. SEEDER SP WAS.M14 15X 28X2,5 U6592 ZB

SUPPORT CARDAN RESSORT SPEC. ZN ATTELAGE SEME RON.M14 15X 28X2,5 U6592 ZB

GELENKWELLE - HACKEN SPEZIALFEDER ZN SZELEM. KUPPL. SCH.M14 15X 28X2,5 U6592 ZB

SOPORTE CARDAN MUELLE ESPEC. ZN CONEX. SEMBRA ARA.M14 15X 28X2,5 U6592 ZB

CHAIN WITH SPRING CATCH SNAP PIN D9 B/83 ZN PIN D25 L122 C43 ZN WASHER 70X8X28-5 BOLT D28 L109 C43 ZN PROP SUPPORT NUT M14X2 PIN 6 X45 U1336 ZN PIN D12 L70 ZN PROP SCREW M 14 X160 5737 8.G RECTANGULAR PIPE 150X100X1900 RECTANGULAR PIPE 150X100X2480 FRAME PIPE 150X100X3200 RECTANGULAR PIPE 150X100X4200 RECTANGULAR PIPE 150X100X6X275 SCREW M14X2X220 U5737 8.8 BR STRIKER COMPL. FRAME PLUG 150X100 B319 FIXED FRAME PIPE 150X5000 FIXED FRAME PIPE 150X6000 FIXED FRAME PIPE L.7500 Q.150 CAP FOR FRAME 150 WASHER 32X4X15-5

CHAINETTE AVEC MOUSQUETON FICHE A DETENTE D9 B/83 ZN BOULON D25 L122 C43 ZN RONDELLE 70X8X28-5 BOULON D28 L109 C43 ZN SUPPORT ETRESILLON ECROU M14X2 GOUPILLE 6 X45 U1336 ZN FICHE D12 L70 ZN ETRESILLON VIS M 14 X160 5737 8.G TUBE RECTANGULAIRE 150X100X190 TUBE RECT.150X100X6X2480 TUBE BATI 150X100X3200 TUBE RECT.150X100X4200 TUBE RECT.150X100X6X2750 VIS M14X2X220 U5737 8.8 BR BRIDE 150 MM BOUCHON CH-SSIS 150X100 COMPL. PIPE BATI FIXE 150X5000 TUBE BATI FIXE 150X6000 TUBE BATI FIXE L.7500 Q.150 BOUCHON POUR BATI 150 RONDELLE 32X4X15-5

KETTE MIT KARABINERHAKEN EINRASTSTIFT D9 B/83 ZN BOLZEN D25 L122 C43 ZN UNTERLEGSCHEIBE 70X8X28-5 BOLTZEN D28 L109 C43 ZN STsTZLAGER MUTTER M14X2 SPLINT 6 X45 U1336 ZN STIFT D12 L70 ZN STsTZE SCHRAUBE M 14 X160 5737 8.G RECHTECK.ROHR150X100X1900 R. ROHR150X100X6X2480 ROHR RAHMEN 150X100X3200 R. ROHR150X100X4200 R. ROHR150X100X6X2750 SCHRAUBE M14X2X220 U5737 8.8 ANSCHLAG PFROPFEN RAHMEN 150X100 KOMPL. ROHR FIXER RAHMEN 150X5000 ROHR FIXER RAHMEN 150X6000 ROHR FIXER RAHMEN L.7500 Q.150 PFROPFEN FOR RAHMEN 150 UNTERLEGSCHEIBE 32X4X15-5

CADENA CON GANCHO CLAVIJA DE MUELLE D9 B/83 ZN PERNO D25 L122 C43 ZN ARANDELA 70X8X28-5 PERNO D28 L109 C43 ZN STsTZLAGER DADO M14X2 CLAVIJA 6 X45 U1336 ZN CLAVIJA D12 L70 ZN PUNTAL TORNILLO M 14 X160 5737 8.G TUBO RECT.150X100X1900 TUBO RECT.150X100X6X2480 TUBO BASTIDOR 150X100X3200 TUBO RECT.150X100X4200 TUBO RECT.150X100X6X2750 TORNILLO M14X2X220 U5737 8.8 ELEMENTO DE EMPALME TAPËN BASTIDOR 150X100 COMPL. TUBO BASTIDOR FIJO 150X5000 TUBO BASTIDOR FIJO 150X6000 TUBO BASTIDOR FIJO L.7500 Q150 TAPON PARA BASTIDOR 150 ARANDELA 32X4X15-5

cod. G19530932

TAV. 021

39 38 32 19 30 28 26 25 24 23 31 22 33

2 12

11 20

3 4

6 11

15 16 M14 x 160 - 5 M14 x 200 - 51 M14 x 220 - 52

21 42 41

2 48 12

14 49

42 10

29 35

49 45

13 40

cod. G19530932

SEGNAFILE Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52

G16610230 G13812311 G17111290 G16610200 F01020225 G15412691 G15412682 G23440198 G15110091 G18701600 F01200270 F02100312 F02100146 F01100011 G15412810 F20110705 G19203740 G15412852 G15412861 G15412780 F01020122 G16610430 G16610160 F04010156 G18801270 F02050370 G65337004 F03010576 F01020476 G16610170 F01200244 F01230098 G16610180 G18902260 G15470810 F01020236 F01200306 G16610190 F01060040 G15413020 G15413010 F02200194 G20970142 G20970111 G13811261 G15470231 G18901092 G18902861 F01020512 F01200293 F01020233 F01020236

TAV. 021

Descrizione

Description

Benennung

Descripcion

CAVALLOTTO MANICOTTO DISCO CATENELLA CON MOSCHETTONE MANICOTTO DISCO DISCO D.320 COMPL VITE M14X2X160 U5737 8.8 BR BRACCIO SEGNAFILE SX ASS.SUPP.SEGNAFILE SX SCONTRO ATTACCO BRACCIO HL/2 SCONTRO A U RONDELLA 35,5 X50 X3 ZN DADO M10X 1,5 U5588 6.8 ZN SPINA DI SICUREZZA D.8X45 ZN SPINA E.P. 8X 55 U6873 C70 BR ING.M 6X1 7663-A 9SMNPB28 ZN ATTACCO FUNE SEGNAFILE CAV.Q.M10X 1,5X 30 51X 62 ZN ELEMENTO FISSAGGIO GAMBO ZN. ASS.SUPP.SEGNAFILE DX BRACCIO SEGNAFILE DX PROLUNGA BRACCIO SEGNAFILE VITE M10X1,5X70 U5737 8.8 ZN FONDELLO ZN. SUPP.CUSCINETTI DISCO SEGN.ZN. CUSC.d20 D47 B14 6204 2RSH BOCCOLA 21 X25 X12 ZN ANELLO E. DI 47X1,75 U7437 C70 MOLLA TRAZ.SOLLEV. FU ANELLO OR 50,52X1,78 NBR VITE M10X1,5X30 U5739 8.8 ZN DISCO SEGNAFILE D.320 DADO M 8X1,25 U5588 6.8 ZN DADO M18X 2,5 D982 8 ZN PERNO REGGIDISCO SEGNAF. GUIDACORDA ZN MT SUPPORTO GUIDACORDA SP VITE M14X2X220 U5737 8.8 BR DADO M14X 2 U5588 6.8 ZN CHIUSURA CUSCINETTO ZN VITE M8X1,25X20 U5732 4.6 ZG SPINA 15X120 ZN SPINA 15X62 ZN COPIGLIA 4X 25 U1336 ZN RONDELLA 32X4X15,5 RONDELLA 29,8X2X16,5 FALCIONE SEGNAFILE INT. SUPPORTO MOLLA PIATTA CON.150* GAMBO CONCIMAZ.MOLLA PIATTA SP RINF.MOLLA PIATTA CONCIM.SP VITE M12X1,75X35 U5739 8.8 ZN DADO M12X1,75 U5588 6.8 ZN VITE M14X2X200 U5737 8.8 BR VITE M14X2X220 U5737 8.8 BR

DISK SLEEVE U BOLT CHAIN WITH SPRING CATCH DISK SLEEVE U BOLT DISK D.320 COMPL SCREW M 14 X160 5737 8.G LH FOLDING ARM

ETRIER MANCHON DISQUE CHAINETTE AVEC MOUSQUETON MANCHON DISQUE DISQUE D.320 COMPLET VIS M 14 X160 5737 8.G BRAS PLIANT GCH.

_BERBR_CKUNG MUFFE SCHEIBE KETTE MIT KARABINERHAKEN SCHEIBENMUFFE SCHEIBE D.320 KOMP SCHRAUBE M 14 X160 5737 8.G KLAPPBARER ARM LI.

ABRAZADERA MANGUITO DE DISCO CADENA CON GANCHO MANGUITO DISCO DISCO D.320 COM TORNILLO M 14 X160 5737 8.G BRAZO PLEGABLE IZQ.

STRIKER PLATE ARM ATTACH. HL/2 STRIKER WASHER 35.5 X 50 X 3- GALVANIZ NUT M10X 1,5 U5588 6.8 ZN SAFETY PIN D.8X45 ZN PIN EL. .8 X55 DIN 1481 GREASE NIPPLE M6X1 7663-A ZN ROW MARKER ROPE LINKAGE U-BOLT GALVAN GALVAN. SHANK FASTENING ELEMEN

BUTEE FIXATION BRAS HL/2 BRIDE 150 MM RONDELLE 35-5 X50 X3 ZN ECROU M10X 1,5 U5588 6.8 ZN FICHE EL.DE SECURITE D.8X45 ZN FICHE EL.8 X55 DIN 1481 GRAISS. A BILLE M6X1 7663A ZN FIXATION CABLE TRACEUR CAVALIER ZN ELEMENT FIXATION TIGES ZN

ARMKUPPLUNGSANSCHLAG HL/2 ANSCHLAG UNTERLEGSCHEIBE 35-5 X50 X3 MUTTER M10X 1,5 U5588 6.8 ZN SCHERSTIFT D.8X45 ZN SPANNSTIFT 8 X55 DIN 1481 SCHMIERBUECHE M6X1 7663-A ZN SEILKUPPLUNG SPURANZEIGER BsGELBOLZEN ZN BEFESTIGUNGSELEMENT SCHZCHTE Z

ELEMENTO DE EMPALME CONEXIN BC ELEMENTO DE EMPALME ARANDELA 35-5 X50 X3 ZN TUERCA M10X 1,5 U5588 6.8 ZN CLAVIJA DE SEGURIDAD D 8X45 ZN CLAVIJA EL.8 X55 DIN 1481 ENGRAS. DE ESFERAS M6X1 7663-A CONEXIÓN CABLE MARCADOR DE FIL PERNO EN U ZN ELEMENTO SUJECIN VµSTAGOS ZN

RH FOLDING ARM ROWMARKER EXTENSION SCREW M10X1,5X 70 U5737 8.8 ZN BOTTOM ZN. GALVAN. ROWMARKER DISK BEARING BEARING d20 D47 B14 6204 2RSH

BRAS PLIANT DRT. RALLONGE TRACEUR SOL. VIS 10X 1,5X 70 U5737 8.8 ZN

KLAPPBARER ARM RE. VERLZNGERUNG SPURREISSER SCHR.10X 1,5X 70 U5737 8.8 ZN

BRAZO PLEGABLE DER. PROLONG. MARC. DE FILAS TORN.10X 1,5X 70 U5737 8.8 ZN

SUPPORT ROULEMENTS DISQUE TRAC

SCHEIBENLAGERHALTERUNG

SOPORTE COJINETE DE DISCO MARC

SEEGER RING 47X 1,75 U7437 C70 TRACTION SPRING LIFT. FU GASKET OR 50,52X1,78 NBR SCREW M10X1,5 X 30 5739 8.8 ZN ROW MARKER DISK D.320 NUT M8 X1,25 U5588 6.8 ZN NUT M18X 2,5 D982 8 ZN ROWMAKER DISC-HOLDER PIN

SEEGER E. 47X 1,75 U7437 C70 RESSORT TRACT. LEVAGE FU BAGUE OR 50,52X1,78 NBR VIS M10X1,5 X 30 5739 8.8 ZN DISQUE TRACEUR D320 ECROU M8 X1,25 U5588 6.8 ZN ECROU M18X 2,5 D982 8 ZN PIVOT PORTE-DISQUE TRACEUR

SEEGERING E. 47X1,75 U7437 C70 ZUGFEDER HEBUNG FU RING OR 50,52X1,78 NBR SCHRA. M10X1,5X 30 5739 8.8 ZN SPURREISSERSCHEIBE D. 320 MUTTER M8 X1,25 U5588 6.8 ZN MUTTER M18X 2,5 D982 8 ZN SCHEIBENTRAGBOLZEN

ANILLO E. 47X 1,75 U7437 C70 MUELLE TRAC. LEVDEL. FU ANILLO OR 50,52X1,78 NBR TORN. M10X1,5 X 30 5739 8.8 ZN DISCO MARCARDOR DE FILAS O 320 TUERCA M8 X1,25 U5588 6.8 ZN TUERCA M18X 2,5 D982 8 ZN PERNO SOPORTE DISCO MARCAFILA

ROPE GUIDE SUPPORT SP SCREW M14X2X220 U5737 8.8 BR NUT M14X2

SUPPORT GUIDE-CORDE SP VIS M14X2X220 U5737 8.8 BR ECROU M14X2

HALTERUNG SEILFsHRUNG SP SCHRAUBE M14X2X220 U5737 8.8 MUTTER M14X2

SOPORTE GUIACUERDA SP TORNILLO M14X2X220 U5737 8.8 DADO M14X2

SCREW M8X1,25X20 U5732 4.6 ZN GALVANIZED PIN 15X120 PIN 15X62 ZN SPLIT PIN 4 X25 1336 GALVAN. WASHER 32X4X15-5 WASHER 29,8X2X16,5 INNER ROWM. CUTTER CONC. FLAT SPRING SUPPORT 150 FLAT SPRING MANURING LEG SP MANUR.PLATE SPRING REINFORCE.S SCREW M12X1,75X35 5739 8.8 ZN NUT M12X1,75 U5588 6.8 ZN SCREW M14X 2X200 U5737 8.8 ZB SCREW M14X2X220 U5737 8.8 BR

VIS M8X1,25X20 U5732 4.6 ZN GOUPILLE 15X120 ZN GOUPILLE 15X62 ZN GOUPILLE 4 X25 1336 ZN RONDELLE 32X4X15-5 RONDELLE 29,8X2X16,5 HACHOIR TRACEUR INT. SUPP. RESSORT PLAT FUMAGE 150 TIGE FUMAGE RESSORT PLAT SP RENF. RESSORT PLAT FUMAGE SP VIS M12X1,75X35 5739 8.8 ZN ECROU M12X1,75 U5588 6.8 ZN VIS M14X2X 200 U5737 8.8 ZB VIS M14X2X220 U5737 8.8 BR

SCHRA. M8X1,25X20 U5732 4.6 ZN TORN. M8X1,25X20 U5732 4.6 ZN STIFT 15X120 ZN CLAVIJA 15X120 ZN BOLZENSTIFT 15X62 ZN PASADOR 15X62 ZN SPLINT 4 X25 1336 ZN PASADOR 4 X25 1336 ZN UNTERLEGSCHEIBE 32X4X15-5 ARANDELA 32X4X15-5 UNTERLEGSCHEIBE 29,8X2X16,5 ARANDELA 29,8X2X16,5 SZSCHAR SPURREISSER INNEN GUADA¥ADORA MARCADOR DE HILE HALTERUNG DsNGERPLATTENFEDER 1 SOPORTE MUELLE CHATO DE ABONO1 SCHAFT DsNGUNG FLACHE FEDER SP VæSTAGO ABONO MUELLE CHATO SP VERSTZRKUNG FLACHFEDER DsNGUNG REFUERZO MUELLE ABONO SP SCHR. M12X1,75X35 5739 8.8 ZN TORN. M12X1,75X35 5739 8.8 ZN MUTTER M12X1,75 U5588 6.8 ZN TUERCA M12X1,75 U5588 6.8 ZN SCHRAUBE M14X 2X200 U5737 8.8 TORNILLO M14X2X200 5737 8.8 ZB SCHRAUBE M14X2X220 U5737 8.8 TORNILLO M14X2X220 U5737 8.8

cod. G19530932

TAV. 032 31 34 38 6 27 37

(L1) 220 mm - 5 (L1) 370 mm - 44

SX 46 - M6x80 25 - M8x90 47 31

(L1) 220 mm - 5 (L1) 270 mm - 44

28 29

14 12 11

39 16

13 33

31 8 19

40 29 2

35 (L2) 274 mm - 7 (L2) 343 mm - 45

(L1) 220 mm - 3 (L1) 270 mm - 42

29 40

4 - (L1) 220 mm 43 - (L1) 270 mm

23 26

31 L1 L2

2 35

(L2) 274 mm - 7 (L2) 343 mm - 45

cod. G19530932

SEGNAFILE RINFORZATO Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49

G13812311 G15413020 G15411381 G15411391 G15411471 G16072220 G14215830 G16610430 G16610160 F04010156 G18801270 F02050370 G15413010 F03010576 G19204230 G17111330 F20110860 G17111290 G16610180 G16610170 G16610222 F01020168 G19204030 F01020077 F01020088 F01020236 F01060040 F01410076 F01200293 F01200306 F01200244 F01230098 F01410088 F01420048 F02200227 F02200507 G16610190 G16610210 F01200270 F05150459 F02100312 G16611090 G16611100 G16611150 G16611250 F01020050 F01220011 F03150996 F01040101

TAV. 032

Descrizione

Description

Benennung

Descripcion

CATENELLA CON MOSCHETTONE SPINA 15X120 ZN SUPPORTO BRACCIO DX SUPPORTO BRACCIO SX BRACCIO SEGNAFILE FRANCIA BRACCIO SEGNAFILE ASSE SEGNAFILE ZN FONDELLO ZN. SUPP.CUSCINETTI DISCO SEGN.ZN. CUSC.d20 D47 B14 6204 2RSH BOCCOLA 21 X25 X12 ZN ANELLO E. DI 47X1,75 U7437 C70 SPINA 15X62 ZN ANELLO OR 50,52X1,78 NBR SUPPORTO MANICOTTO TQ.50 SCONTRO 90X70 -10 4F11 66X46 CAV.T.M10X 1,5X 30 46X128,5ZN MANICOTTO DISCO PERNO REGGIDISCO SEGNAF. DISCO SEGNAFILE D.320 MONT.DISCO D.320 LIM. VITE M12X1,75X90 U5737 8.8 ZN SCONTRO FISS.150 2F D15 VITE M 8X1,25X60 U5737 8.8 ZN VITE M 8X1,25X90 U5737 8.8 ZN VITE M14X2X220 U5737 8.8 BR VITE M8X1,25X20 U5732 4.6 ZG ROS.M12 13X 24X2,5 U6592 ZN DADO M12X1,75 U5588 6.8 ZN DADO M14X 2 U5588 6.8 ZN DADO M 8X1,25 U5588 6.8 ZN DADO M18X 2,5 D982 8 ZN ROS.M14 15X 28X2,5 U6592 ZN ROS.M8 8,4X 24X 2 U6593 ZN COPIGLIA 5X 30 U1336 ZN SPINA SCATTO D. 9 B/83 ZN CHIUSURA CUSCINETTO ZN ASS.LIMITATORE PROFONDITA' DADO M10X 1,5 U5588 6.8 ZN PARACOLPI CIL.75X25 M12 SH70 SPINA DI SICUREZZA D.8X45 ZN SUPPORTO BRACCIO SEGN.RINF.DX SUPPORTO BRACCIO SEGN.RINF.SX BRACCIO SEGNAFILE RINF. PERNO D.32X343 VITE M6X1X80 U5737 8.8 ZN DADO M 6X 1 D980 8 ZN COPPIA COLLARI X TUBO D.18 VITE M 8X1,25X40 U5931 8.8 ZN

CHAIN WITH SPRING CATCH GALVANIZED PIN 15X120 RIGHT ARM SUPPORT LEFT ARM SUPPORT FRENCH ROWMARKER ARM ROW MARKER BEAM GALVAN. ROWMAKER AXLE BOTTOM ZN. GALVAN. ROWMARKER DISK BEARING BEARING d20 D47 B14 6204 2RSH

CHAINETTE AVEC MOUSQUETON GOUPILLE 15X120 ZN RACLEUR GCH BAGUE SUPPORT BRAS GCH BRAS TRACEUR BRAS TRACEUR AXE BRAS TRACEUR ZN

KETTE MIT KARABINERHAKEN STIFT 15X120 ZN HALTERUNG ARM RE HALTERUNG ARM LI SPURREISSERARM REIHENANREISSARM REISSERASCHE

CADENA CON GANCHO CLAVIJA 15X120 ZN SOPORTE BRAZO DER SOPORTE BRAZO IZQ BRAZO MARCADOR DE FILAS BRAZO MARCADOR DE FILAS EJE MARCADOR DE FILAS

SUPPORT ROULEMENTS DISQUE TRAC

SCHEIBENLAGERHALTERUNG

SOPORTE COJINETE DE DISCO MARC

SEEGER RING 47X 1,75 U7437 C70 PIN 15X62 ZN GASKET OR 50,52X1,78 NBR

SEEGER E. 47X 1,75 U7437 C70 GOUPILLE 15X62 ZN BAGUE OR 50,52X1,78 NBR

SEEGERING E. 47X1,75 U7437 C70 BOLZENSTIFT 15X62 ZN RING OR 50,52X1,78 NBR

ANILLO E. 47X 1,75 U7437 C70 PASADOR 15X62 ZN ANILLO OR 50,52X1,78 NBR

STOP TEETH 90X70 -10 4F11 66X4 U BOLT M10X46 ZN DISK SLEEVE U BOLT ROWMAKER DISC-HOLDER PIN ROW MARKER DISK D.320 ROWMARKET DISC D.320 ASSEMBLY SCREW M12X1,75X90 U5737 8.8 ZN

BUT+E 90X70 -10 4TROUS 11 66X4 CAVALIER M10X46 ZN MANCHON DISQUE PIVOT PORTE-DISQUE TRACEUR DISQUE TRACEUR D320

ANSCHLAG 90X70 -10 4F11 66X46 VERBINDUNG M10X46 ZN SCHEIBENMUFFE SCHEIBENTRAGBOLZEN SPURREISSERSCHEIBE D. 320

DIENTE DE PARADA 90X70 -10 4F1 PERNO EN U M10X46 ZN MANGUITO DISCO PERNO SOPORTE DISCO MARCAFILA DISCO MARCARDOR DE FILAS O 320

VIS M12X1,75X90 U5737 8.8 ZN

SCHR.M12X1,75X90 U5737 8.8 ZN

TORN. M12X1,75X90 U5737 8.8 ZN

SCREW M8X1,25X60 U5737 8.8 ZN SCREW M8X1,25 X90 U5737 8.8 ZN SCREW M14X2X220 U5737 8.8 BR SCREW M8X1,25X20 U5732 4.6 ZN WASHER D12 U6592 ZN NUT M12X1,75 U5588 6.8 ZN NUT M14X2 NUT M8 X1,25 U5588 6.8 ZN NUT M18X 2,5 D982 8 ZN WAS.M14 15X 28X2,5 U6592 ZB WASHER M8 8,4X 24X 2 U6593 ZN SPLIT PIN 5 X30 1336 GALVAN. SNAP PIN D9 B/83 ZN

VIS M8X1,25X60 U5737 8.8 ZN VIS M8X1,25 X90 U5737 8.8 ZN VIS M14X2X220 U5737 8.8 BR VIS M8X1,25X20 U5732 4.6 ZN RONDELLE D12 U6592 ZN ECROU M12X1,75 U5588 6.8 ZN ECROU M14X2 ECROU M8 X1,25 U5588 6.8 ZN ECROU M18X 2,5 D982 8 ZN RON.M14 15X 28X2,5 U6592 ZB RONDELLE M8 8,4X 24X2 U6593 ZN GOUPILLE 5 X30 1336 ZN FICHE A DETENTE D9 B/83 ZN

SCHRA. M8X1,25X60 U5737 8.8 ZN SCHRA. M8X1,25X90 U5737 8.8 ZN SCHRAUBE M14X2X220 U5737 8.8 SCHRA. M8X1,25X20 U5732 4.6 ZN SCHEIBE D12 U6592 ZN MUTTER M12X1,75 U5588 6.8 ZN MUTTER M14X2 MUTTER M8 X1,25 U5588 6.8 ZN MUTTER M18X 2,5 D982 8 ZN SCH.M14 15X 28X2,5 U6592 ZB SCHEIBE M8 8,4X 24X 2 U6593 ZN SPLINT 5 X30 1336 ZN EINRASTSTIFT D9 B/83 ZN

TORN. M8X1,25X60 U5737 8.8 ZN TORN. M8X1,25 X90 U5737 8.8 ZN TORNILLO M14X2X220 U5737 8.8 TORN. M8X1,25X20 U5732 4.6 ZN ARANDELA D12 U6592 ZN TUERCA M12X1,75 U5588 6.8 ZN DADO M14X2 TUERCA M8 X1,25 U5588 6.8 ZN TUERCA M18X 2,5 D982 8 ZN ARA.M14 15X 28X2,5 U6592 ZB ARANDELA M8 8,4X 24X2 U6593 ZN PASADOR 5 X30 1336 ZN CLAVIJA DE MUELLE D9 B/83 ZN

LIMITER DEPTH COUPLYNG NUT M10X 1,5 U5588 6.8 ZN BUFFER-CYL. 75X25 M12 781103 SAFETY PIN D.8X45 ZN

GR. ASS. LIMITEUR DE PROFONDEU ECROU M10X 1,5 U5588 6.8 ZN TAMPON CIL. 75X25 M12 781103 FICHE EL.DE SECURITE D.8X45 ZN

TIEFENBEGRENZERKOMPLEX MUTTER M10X 1,5 U5588 6.8 ZN PUFFER ZYL. 75X25 M12 781103 SCHERSTIFT D.8X45 ZN

CONJ. LIMITADOR DE PROFUNDIDAD TUERCA M10X 1,5 U5588 6.8 ZN PARACHOQ. CIL.75X25 M12 781103 CLAVIJA DE SEGURIDAD D 8X45 ZN

SCREW M6X 1X80 U5737 8.8 ZN NUT M6X1 D980 8 ZN

VIS 6 X80 5737 8.G ZN ECROU M6X1 D980 8 ZN

SCHRAUBE 6 X80 5737 8.G ZN MUTTER M6X1 D980 8 ZN

TORNILLO 6 X80 5737 8.G ZN TUERCA M6X1 D980 8 ZN

SCREW M8X1,25X40 U5931 8.8 ZN

VIS M8X1,25X40 U5931 8.8 ZN

SCHRAUBE M8X1,25X40 U5931 8.8

TORNILLO M8X1,25X40 U5931 8.8

cod. G19530932

TAV. 042

18 15 18

20 15

6 7

5 18

4 2

L. 2000 - 19 L. 2350 - 27 L. 2750 - 28 L. 3150 - 29 L. 3500 - 30 L. 3850 - 31 L. 4000 - 32 L. 4250 - 11 L. 4650 - 13

9 12

L. 2000 - 19 L. 2350 - 27 L. 2750 - 28 L. 3150 - 29 L. 3500 - 30 L. 3850 - 31 L. 4000 - 32 L. 4250 - 11 L. 4650 - 13

2 3

1 26 24

cod. G19530932

COMANDO SEGNAFILE OLEODINAMICO Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

G15413050 F01500012 F03150266 G22270463 F20110770 F01200306 G20970142 G15412351 F01020068 F01200244 G15413070 G16611050 G15413080 F03150859 F05150325 F03150211 F03151237 F03150935 G23440517 G13811211 F03151226 F03151219 G16011690 G15413110 G16610140 G19702710 G22505140 G15210553 G15210950 G15210561 G15413060 G16012650

TAV. 042

Descrizione

Description

Benennung

Descripcion

STROZZATORE A PASTIGLIA D.0,8 RONDELLA IN RAME 1/4" NIPPLO MM CIL-CIL 1/4-1/4 ZN TUB.TR.1/4R2 F-F 1/4 L1500 LM CAV.Q.M14X 2X 50 96X119 ZN DADO M14X 2 U5588 6.8 ZN RONDELLA 32X4X15,5 SUPPORTO VALVOLA VITE M 8X1,25X40 U5737 8.8 ZN DADO M 8X1,25 U5588 6.8 ZN TUBO 1/4R2 CF1/4- F1/4 4250 VALVOLA SEGNAFILE CN COMPL TUBO 1/4 C-F L.4650 CURVA 90°F.GIREV.1/4 - M.1/4 CAPPUC.F X INN.M RAP.1/2 ROSSO NIPPLO MM CIL-CIL 1/2-1/4 ZN ROS. 21 X27X1,5 RAME -1/2" INNESTO RAP.MASCH.1/2 A VALV. TUBO 1/4R2 C-F 1/4 L2000 HL/ID TUBO X COLLEG. AL TRATTORE REGOL.DI FLUSSO VRF 1/4' GAS RACCORDO -T- MASCHIO 1/4 ZN NIPPLO MM 1/4-1/4 FORO 1,0 CILINDRO SEGNAFILE SP COMPL. CILINDRO DE 30X40 -155 DECAL.POSIZIONE STROZZATORE TUBO 1/4R2 C-F 1/4 L.2350 LM TUBO 1/4R2 CF45 1/4-F 1/4 2750 TUBO 1/4 R2 C-F 1/4 L.3150 TUBO 1/4R2 CF1/4- F1/4 3500 TUBO 1/4R2 CF1/4- F1/4 3850 TUBO R2 1/4 C-F L.4000

PAD VENTURI D.0,8 WASHER 13 X19X1,5 - 1/4" NIPPLE GALV.CYL.MALE 1/4 ZN TUBE TR.1/4R2 F-F1/4 L1500 LM U BOLT M14X2X50 96X119 ZN NUT M14X2 WASHER 32X4X15-5

ETRANGLEUR D.0,8 RONDELLE NIPPLE MALE CYL. 1/4 ZN TUB.TR.1/4R2 F-F 1/4 L1500 LM BRIDE U M14X2X50 96X119 ZN ECROU M14X2 RONDELLE 32X4X15-5

DROSSEL D.0,8 SCHEIBE NIPPELZYL.1/4 ZN ROHR1/4R2 F-F 1/4 L1500 LM ANSCHLANG U M14X2X50 96X119 ZN MUTTER M14X2 UNTERLEGSCHEIBE 32X4X15-5

ESTRANGULADOR D.0,8 ARANDELA NIPLE MACHO CIL.1/4 ZN TUB.TR.1/4R2 F-F 1/4 L1500 LM EL.DE EMPALME M14X2X50 96X119 DADO M14X2 ARANDELA 32X4X15-5

SCREW M8X1,25X40 U5737 8.8 ZN NUT M8 X1,25 U5588 6.8 ZN PIPE 1/4R2 CF1/4-F1/4 4250 ROWMARKER VALVE ASSY. TUBE 1/4 C-F L.4650 ELBOW 90° F. SWIVEL 1/4 -M.1/4 COVER CONNECT F 1/2 RED NIPLE MM CIL-CIL 1/4-1/2 ZN COPPER WASHER 21X27X1,5 1/2 QUICK CONNECT MALE CONE 1/2 PIPE 1/4R2 C-F 1/4 L2000 HL/ID PIPE FOR CONNECTION TO TRACTOR 1/4' GAS VALVE VRF MALE T-UNION 1/4 ZN UPRIGHT 1/4'' NIPPLE WITH GRUB ROW MARKER CYLINDER SP CYLINDER D.E.30-40/155 VENTURI POSITION STICKER PIPE 1/4R1 C-F 1/4 L.2350 LM PIPE 1/4R2 CF45 1/4-F 1/4 2750 PIPE 1/4-R2 C-F 1/4 M.3150 PIPE 1/4R2 CF1/4- F1/4 3500 TUBE 1/4R2 CF1/4-F1/4 3850 PIPE 1/4 R2 C-F 1/4 L.4000

VIS M 8X1,25X40 U5737 8.8 ZN ECROU M8 X1,25 U5588 6.8 ZN TUBE 1/4R2 CF1/4-F1/4 4250 SOUPAPE TRACEUR COMPL. TUBE 1/4 C-F L.4650 COUDE 90° F.TOURN.1/4 - M.1/4 COUVERCLE CONNEXION F 1/2 ROSE NIPLE MM 1/4-1/2 ZN RONDELLE CUIVRE 21X27X1,5 1/2 CONNEXION RAPIDE MALE CONE 1/2 TUBE 1/4R2 C-F 1/4 L2000 HL/ID TUBE POUR CONN. AU TRACTEUR SOUPAPE REG DEBIT VRF 1/4" GAZ CONNECTION A T MONTANT NIPPLE 1/4 AVEC GRAIN CYLINDRE TRACEUR SP CYLINDRE D.E. 30-40/155 DECALCOM POSITION TAQUET TUBE 1/4R1 C-F 1/4 L. 2350 LM

SCHRA. M8X1,25X40 U5737 8.8 ZN MUTTER M8 X1,25 U5588 6.8 ZN SCHLAUCH 1/4R2 CF1/4-F1/4 4250 KOMPL. SPURREISSERVENTIL ROHR 1/4 C-F L.4650 KNIESTsCK 90[ F.DREHB.1/4 - M. DECKEL W 1/2 SCHNELLKUPP. ROT NIPLE GG 1/4-1/2 ZN SCHEIBE KUPFER 21X27X1,5 1/2 SCHNELLKUPP.GEWINDE KONISC 1/2 ROHR 1/4R2 C-F 1/4 L2000 HL/ID ROHR F. KUPPLUNG AM SCHLEPPER VENITL VRF 1/4' GAS T VERBINDUNG STZNDER NIPPEL 1/4 MIT STIFT 8 SYLINDER REIHENANREISSER SP ZYLINDER D.E.30-40/155 ABZIEHBILD POSIZION DROSSELSTE ROHR 1/4R1 C-F 1/4 L.2350 LM

TORNIL.M8X1,25X40 U5737 8.8 ZN TUERCA M8 X1,25 U5588 6.8 ZN TUBO 1/4R2 CF1/4-F1/4 4250 V-LVULA MARC. DE FILAS COMPL TUBO 1/4 C-F L.4650 CURVA 90 F.GIRAT.1/4 - M.1/4 PAC PROTECCION F 1/2 ROJO NIPLE MM 1/4-1/2 ZN ARANDELA COBRE 21X27X1,5 1/2 ACOPLAMIENT.RAP.MACHO CONO 1/2 TUBO 1/4R2 C-F 1/4 L2000 HL/ID TUBO P/CONEXIN AL TRACTOR T VæLVULA VRF 1/4' GAS JUNTURA A T MONT.NIPLE 1/4 TORNIL.SIN CABE CILINDRO MARCADOR DE FILAS CILINDRO D.E. 30-40/155 CALCOMAN-A. POSICIËN ESTRANGUL TUBO 1/4R1 C-F 1/4 L.2350 LM

TUBE 1/4-R2 C-F 1/4 M.3150 TUBE 1/4R2 CF1/4- F1/4 3500 TUYAU 1/4R2 CF1/4-F1/4 3850 TUBE 1/4 R2 C-F 1/4 L. 4000

ROHR 1/4-R2 C-F 1/4 M.3150 ROHR 1/4R2 CF1/4- F1/4 3500 SCHLAUCH 1/4R2 CF1/4-F1/4 3850 ROHR 1/4 R2 C-F 1/4 L 4000

TUBO 1/4-R2 C-F 1/4 M.3150 TUBO 1/4R2 CF1/4- F1/4 3500 TUBO 1/4R2 CF1/4-F1/4 3850 TUBO 1/4 R2 C-F 1/4 L.4000

cod. G19530932

TAV. 051 19

26 - (mt. ...)

24 8 25 4

6 21 7

13 18

16 20 18

12 19 20 17

13 20 13

14 9

cod. G19530932

COMANDO SEGNAFILE MECCANICO Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

G15410921 G15410950 G15410960 G15410990 G15411110 G15411120 G15411130 G15411141 F20100133 G18902680 G21120067 G22220124 G22220132 G22270021 G22270022 G13810342 F01020182 F01020510 F01020517 F01200293 F01410088 F02200227 F02200507 F02100141 F01100011 F05150399 G13812311

Descrizione COMANDO SEGNAF.SP LEVA PIANA LEVA STAMPATA LEVA SCATTO SEGNAFILE SUPPORTO LEVA SCATTO FERMO LEVE AGGANCIO FERMO CORDE SEGNAFILE SP SCATTO AUTOMATICO SP 530 COMPL PERNO D25 L122 C43 ZN MOLLA TRAZ.ZN SERBATOIO SV290 BOCCOLA IN BRONZO SCONTRO SCONTRO BRACCI BRACCIO INF.SX COMANDO SEGNAF. BRACCIO INF.DX COMANDO SEGNAF. ATTACCO COMANDO 3° PUNTO VITE M12X1,75X160 5737 8.8 BR VITE M12X1,75X30 U5739 8.8 ZN VITE M12X1,75X50 U5739 8.8 ZN DADO M12X1,75 U5588 6.8 ZN ROS.M14 15X 28X2,5 U6592 ZN COPIGLIA 5X 30 U1336 ZN SPINA SCATTO D. 9 B/83 ZN SPINA E.P. 8X 36 U6873 C70 BR ING.M 6X1 7663-A 9SMNPB28 ZN CORDA POLIPROPILENE D.12 CATENELLA CON MOSCHETTONE

cod. G19530932

TAV. 051

Description

Benennung

Descripcion

FLAT LEVER PRESSED LEVER ROWMARKER SNAP LEVER SNAP LEVER SUPPORT LEVERS HOOK UP STOP ROWMARKER ROPE STOP SP

LEVIER PLAT LEVIER IMPRESSION LEVIER DETENTE TRACEUR SUPPORT LEVIER DETENTE ARRET LEVIER ACCORCHAGE ARRET CORDES TRACEUR SP

FLACHER HEBEL GEPRESSTER HEBEL SCHNAPPHEBEL REIHENANREISSER HALTERUNG SCHNAPPHEBEL FESTSTELLVORRICHTUNG KUPPLUNGS FESTSTELLVOR. SEILE REIHENANRE

PALANCA PLANA PALANCA MOLDEADA PALANCA DISPARO MARCADOR DE FI SOPORTE PALANCA DISPARADOR BLOQUEO PALANCA ENGANCHE BLOQUEO CUERDAS MARCADOR FILAS

PIN D25 L122 C43 ZN GALV.TANK TRACT.SPRING SV290 BRONZE BUSHING STRIKER PLATE STRIKER PLATE- ARMS ARM-LOWER LEFT ROWMARK. CONTR. RIGHT LOWER ARM-ROWMARK.CONTR. CONTROL COUPLING 3. POINT BOLT 12X160 5737 8.G BOLT M 12X30 SCRE M12X1,75X50 5739 8.8 ZN NUT M12X1,75 U5588 6.8 ZN WAS.M14 15X 28X2,5 U6592 ZB SPLIT PIN 5 X30 1336 GALVAN. SNAP PIN D9 B/83 ZN PIN EL. 8X 36 U6873 C70 BR GREASE NIPPLE M6X1 7663-A ZN POLIPROPILENE 12 CABLE CHAIN WITH SPRING CATCH

BOULON D25 L122 C43 ZN RESSORT RAZ.ZN RESERVOIR SV290 BOITE EN BRONZE BUTEE BUTEE BRAS BRAS INF. GCH. COMMANDE TRACEU BRAS INF. DRT. COMMANDE TRACEU FIXATION COMMANDE 3 POINT K VIS 12X160 5737 8.G VIS M 12X30 VIS M12X1,75X50 5739 8.8 ZN ECROU M12X1,75 U5588 6.8 ZN RON.M14 15X 28X2,5 U6592 ZB GOUPILLE 5 X30 1336 ZN FICHE A DETENTE D9 B/83 ZN FICHE EL. 8X 36 U6873 C70 BR GRAISS. A BILLE M6X1 7663A ZN CORDE POLIPROPILENE 12 CHAINETTE AVEC MOUSQUETON

BOLZEN D25 L122 C43 ZN ZUGFEDER ZN BEHZLTER SV290 BRONZEBsCHSE ANSCHLAG ARME ANSCHLAG LINKER UNT. ARM SPURREISSERSTE RECHTER UNT. ARM SPURREISSERST UPPLUNG STEUERUNG 3. PUNKT C SCHRAUBE 12X160 5737 8.G SCHRAUBE M 12X30 SCHRA. M12X1,75X50 5739 8.8 ZN MUTTER M12X1,75 U5588 6.8 ZN SCH.M14 15X 28X2,5 U6592 ZB SPLINT 5 X30 1336 ZN EINRASTSTIFT D9 B/83 ZN SPANNSTIFT 8X 36 U6873 C70 BR SCHMIERBUECHE M6X1 7663-A ZN SEIL POLIPROPILENE 12 KETTE MIT KARABINERHAKEN

PERNO D25 L122 C43 ZN MUELLE TRAC.ZN DEPSITO SV290 A CASQUILLO DE BRONCE ELEMENTO DE EMPALME ELEMENTO DE EMPALME BRAZOS BRAZO INF.IZQ. MANDO MARC. FIL BRAZO INF.DER. MANDO MARC. FIL ONEXIN MANDO 3PUNTO OPR TORNILLO 12X160 5737 8.G TORNILLO M 12X30 TORN. M12X1,75X50 5739 8.8 ZN TUERCA M12X1,75 U5588 6.8 ZN ARA.M14 15X 28X2,5 U6592 ZB PASADOR 5 X30 1336 ZN CLAVIJA DE MUELLE D9 B/83 ZN CLAVIJA EL. 8X 36 U6873 C70 BR ENGRAS. DE ESFERAS M6X1 7663-A CUERDA POLIPROPILENE 12 CADENA CON GANCHO

TAV. 271 20 29

24 20

8 - 150x150 x2650 45 - 150x150 x2800 47 - 150x150 x3000 48 - 150x150 x2500 49 - 150x100 x2650 53 - 150x100 x2800 54 - 150x100 x3200 55 - 150x100 x2480

20 29

24 31

4 7

TL - 14 TC - 65 31

13 - L.1400 52 - L.1590*

30 27

L 80 mm

60 mm

50*

11 - TL 66 - TC

35 18 61 30 27

12 - L.1400 51 - L.1590*

9 - 150x150 x1480 56 - 150x150 x1200 57 - 150x100 x1480 58 - 150x100 x1200

21 46

M14x220 - 25 M14x160 - 67

1 37 6

39 23

16 42

44 33

32 4

3 63 62

480

330

TL - 15 TC - 64

17 - 150X150 59 - 150X100

(*) Varianti per trasporto stradale 2,55 mt.

cod. G19530932

TELAIO PIEGHEVOLE Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67

G14219550 G14219500 G14215302 G14215360 G14215570 G14216730 G14217560 G14215170 G14215541 F20100076 G14219530 G14216613 G14216641 G14216714 G14216724 G15110091 G19003000 F20100124 F20100141 G20970043 G18701810 G20970126 G18701580 G18801380 F01020236 F01020322 F01020476 F01020510 F01230131 F01200270 F01200293 F01200306 F02200272 F02200374 F02200507 F01100011 F01100061 F05150459 G18701770 F01020166 F01230291 G15413210 G15817000 F01220048 G22505031 F03100178 G16610100 G15211690 G14217260 G14218890 G14218851 G14218830 G14217390 G14217400 G16610050 G14219190 G14217270 G14218860 G16610110 F20120401 F20120400 F01220033 F01020109 G14219860 G14219850 G14219880 F01020225

Descrizione SPINA ROTAZIONE FLANGIA CILINDRO DE 40X80X335 SPINA DI SICUREZZA FERMO TELAIO MOBILE PIASTRA SCORRIMENTO SUPPORTO 5 TUBI TELAIO FISSO TUBO Q.150X 8X1480 PERNO D28 L154 C40 ZN TELAIO PORTANTE SI-MTI BRACCIO INFERIORE BRACCIO SUPERIORE SUPPORTO TELAIO MOBILE DX SUPPORTO TELAIO MOBILE SX SCONTRO A U TAPPO PER TELAIO 150 PERNO D32 L135 C40 ZN PERNO D36 L128 C43 ZN RONDELLA 50X8X20,5 ZN RONDELLA 38X70X10 RONDELLA 75X2,5X14,5 RONDELLA 30,5 X76 X4 BOCCOLA 20,25X40 X121 VITE M14X2X220 U5737 8.8 BR VITE M20X2,5X190 U5737 10.9 ZD VITE M10X1,5X30 U5739 8.8 ZN VITE M12X1,75X30 U5739 8.8 ZN DADO M20X 2,5 D982 6 ZN DADO M10X 1,5 U5588 6.8 ZN DADO M12X1,75 U5588 6.8 ZN DADO M14X 2 U5588 6.8 ZN COPIGLIA 10X 60 U1336 ZN COPIGLIA R 4X 82 ZN SPINA SCATTO D. 9 B/83 ZN ING.M 6X1 7663-A 9SMNPB28 ZN ING.M10X1 7663-A 9SMNPB28 ZN PARACOLPI CIL.75X25 M12 SH70 RONDELLA 50 X90 X0,5 VITE M12X1,75X80 U5737 8.8 ZN DADO M30X 2 D985 ZN TAPPO TELAIO 120 COMPL. PUNTELLO TELAIO PIEGH. DADO M12X1,75 D980 8 ZN TUBO TELAIO L=2800 KIT GUARNIZ.CILINDRO 14216770 TUBO TELAIO FISSO L.3000 Q.150 TUBO TELAIO FISSO L.2500 Q.150 TUBO R.150X100X 6X2650 FERMO TELAIO BRACCIO INF.LUNGO BRACCIO SUPPORTO LUNGO TUBO R.150X100X 6X2800 TUBO TELAIO 150X100X3200 TUBO R.150X100X2480 TUBO Q.150X 8X1200 TUBO R.150X100X 6X1480 TUBO R.150X100X 6X1200 TAPPO TELAIO 150X100 COMPL. FASCETTA FERMA CARDANO ZN GANCIO SOSTEGNO CARDANO DADO M10X 1,5 D980 8 ZN VITE M10X1,5X 35 U5737 8.8 ZN TELAIO MOBILE SX TC TELAIO MOBILE DX TC TELAIO PORTANTE TC VITE M14X2X160 U5737 8.8 BR

cod. G19530932

TAV. 271 Description

Description

Benennung

Descripcion

CYLINDER 40X80X335 PIN D20 L173,5 MOBILE FRAME STOP SLIDING PLATE 5 PIPE SUPPORT FIXED FRAME SQUARE TUBE 150X1480 BOLT D28 L154 C40 ZN

CYLINDRE 40X80X335 FICHE D20 L173,5 ARRET BATI MOBILE PLAQUE GLISSEMENT SUPPORT 5 TUBES BATI FIXE TUBE CARR+ 150X1480 BOULON D28 L154 C40 ZN

ZYLINDER 40X80X335 STIFT D20 L173,5 FESTSTELLVORRICHTUNG MOBILER R GLEITPLATTE 5 ROHR HALTERUNG FIXER RAHMEN ROHR Q.150X1480 BOLZEN D28 L154 C40 ZN

LOWER ARM TOP ARM

BRAS INFERIEUR BRAS SUPERIEUR

UNTERER ARM OBERER ARM

STRIKER CAP FOR FRAME 150 BOLT D32 L135 C40 ZN BOLT D36 L128 C43 ZN WASHER 50X8X20-5 ZN WASHER 38X70X10 WASHER 75X2-5X14-5 WASHER 30.5 X 76 X 6 BUSHING 20,25X 40 X121 SCREW M14X2X220 U5737 8.8 BR SCREW M20X2,5X190 5737 10.9 ZN SCREW M10X1,5 X 30 5739 8.8 ZN BOLT M 12X30 NUT M20X 2,5 D982 6 ZN NUT M10X 1,5 U5588 6.8 ZN NUT M12X1,75 U5588 6.8 ZN NUT M14X2 SPLIT PIN 10 X60 1336 GALVAN. SPRING SPLIT PIN 4X82 SNAP PIN D9 B/83 ZN GREASE NIPPLE M6X1 7663-A ZN GREASE NIPPLE M10X1 7663-A ZN BUFFER-CYL. 75X25 M12 781103 WASHER 50 X90 X0,5 SCREW M12X1,75X80 U5737 8.8 ZN SELF-LOCK NUT M30X2 DIN 985 ZN

BRIDE 150 MM BOUCHON POUR BATI 150 BOULON D32 L135 C40 ZN BOULON D36 L128 C43 ZN RONDELLE 50X8X20-5 ZN RONDELLE 38X70X10 RONDELLE 75X2-5X14-5 RONDELLE 30-5 X78 X6

ANSCHLAG PFROPFEN FOR RAHMEN 150 BOLZEN D32 L135 C40 ZN BOLTZEN D36 L128 C43 ZN UNTERLEGSCHEIBE 50X8X20-5 ZN UNTERLEGSCHEIBE 38X70X10 UNTERLEGSCHEIBE 75X2-5X14-5 UNTERLEGSCHEIBE 30-5 X78 X6

0 0 CILINDRO 40X80X335 CLAVIJA D20 L173,5 BLOQUEO BASTIDOR MVIL PLACA DE DESPLAZAMIENTO SOPORTE 5 TUBOS BASTIDOR FIJO TUBO CUADRADO 150X1480 PERNO D28 L154 C40 ZN 0 BRAZO INFERIOR BRAZO SUPERIOR 0 0 ELEMENTO DE EMPALME TAPON PARA BASTIDOR 150 PERNO D32 L135 C40 ZN PERNO D36 L128 C43 ZN ARANDELA 50X8X20-5 ZN ARANDELA 38X70X10 ARANDELA 75X2-5X14-5 ARANDELA 30-5 X78 X6

VIS M14X2X220 U5737 8.8 BR VIS M20X2,5X190 5737 10.9 ZN VIS M10X1,5 X 30 5739 8.8 ZN VIS M 12X30 ECROU M20X 2,5 D982 6 ZN ECROU M10X 1,5 U5588 6.8 ZN ECROU M12X1,75 U5588 6.8 ZN ECROU M14X2 GOUPILLE 10 X60 1336 ZN GOUPILLE 4X82 FICHE A DETENTE D9 B/83 ZN GRAISS. A BILLE M6X1 7663A ZN GRAISSEUR M10X1 7663-A ZN TAMPON CIL. 75X25 M12 781103 RONDELLE 50 X90 X0,5 VIS M12X1,75X80 U5737 8.8 ZN ECROU AUTOB. M30X2 DIN 985 ZN

SCHRAUBE M14X2X220 U5737 8.8 SCHRA.M20X2,5X190 5737 10.9 ZN SCHRA. M10X1,5X 30 5739 8.8 ZN SCHRAUBE M 12X30 MUTTER M20X 2,5 D982 6 ZN MUTTER M10X 1,5 U5588 6.8 ZN MUTTER M12X1,75 U5588 6.8 ZN MUTTER M14X2 SPLINT 10 X60 1336 ZN SPLINT 4X82 EINRASTSTIFT D9 B/83 ZN SCHMIERBUECHE M6X1 7663-A ZN SCHMIERBUECHSE M10X1 7663-A ZN PUFFER ZYL. 75X25 M12 781103 UNTERLEGSCHEIBE 50 X90 X0,5 SCHRA.M12X1,75X80 U5737 8.8 ZN SELBSTSP. MU. M30X2 DIN 985 ZN

TORNILLO M14X2X220 U5737 8.8 TORN. M20X2,5X190 5737 10.9 ZN TORN. M10X1,5 X 30 5739 8.8 ZN TORNILLO M 12X30 TUERCA M20X 2,5 D982 6 ZN TUERCA M10X 1,5 U5588 6.8 ZN TUERCA M12X1,75 U5588 6.8 ZN DADO M14X2 PASADOR 10 X60 1336 ZN PASADOR 4X82 CLAVIJA DE MUELLE D9 B/83 ZN ENGRAS. DE ESFERAS M6X1 7663-A ENGRASADOR M10X1 7663-A ZN PARACHOQ. CIL.75X25 M12 781103 ARANDELA 50 X90 X0,5 TORN. M12X1,75X80 U5737 8.8 ZN TUERCA AUTOB. M30X2 DIN 985 ZN

NUT M12X1,75 D980 8 ZN FRAME PIPE L=2800 KIT O-RING CYLINDER 15312720 FIXED FRAME PIPE L.3000 Q.150 FIXED FRAME PIPE L.2500 Q.150 RECTANGULAR PIPE 150X100X2650 FRAME STOP LOWER ARM LONG LONG SUPPORT ARM COUPLING RECTANGULAR PIPE 150X100X2800 FRAME PIPE 150X100X3200 RECTANGULAR PIPE 150X100X2480

ECROU M12X1,75 D980 8 ZN TUBE BATI L=2800 KIT GARNIT. CYLINDRE 15312720 TUBE BATI FIXE L.3000 Q.150 TUBE BATI FIXE L.2500 Q.150 TUBE RECT. 150X100X 6X2650 ARRET BATI BRAS LONG INFERIEUR BRAS SUPPORT LONG TUBE RECT. 150X100X 6X2800 TUBE BATI 150X100X3200 TUBE RECT.150X100X6X2480

SCHEIBE M12X1,75 D980 8 ZN ROHR RAHMEN L=2800 KIT DICHT.OR ZYLINDER15312720 ROHR FIXER RAHMEN L.3000 Q.150 ROHR FIXER RAHMEN L.2500 Q.150 R. ROHR 150X100X 6X2650 FESTSTELLVORRICHTUNG UNTERER LARGER ARM LARGERALTERUNGSARM R. ROHR 150X100X 6X2800 ROHR RAHMEN 150X100X3200 R. ROHR150X100X6X2480

TUERCA M12X1,75 D980 8 ZN TUBO BASTIDOR L=2800 SET JUNTA OR CILINDRO15312720 TUBO BASTIDOR FIJO L.3000 Q150 TUBO BASTIDOR FIJO L.2500 Q150 TUBO RECT. 150X100X 6X2650 BLOQUEO BASTIDOR BRAZO LARGO INFERIOR BRAZO SOP. LARGO TUBO RECT. 150X100X 6X2800 TUBO BASTIDOR 150X100X3200 TUBO RECT.150X100X6X2480

RECTANGULAR PIPE 150X100X 1480 RECTANGULAR PIPE 150X100X 1200 COMPL. FRAME PLUG 150X100 B319 SHAFT HOOK SUPPORT SHAFT HOOK SUPPORT NUT M10X 1,5 D980 8 ZN SCREW M10X1.5X35 U5737 8.8 ZB

TUBE RECT.150X100X 6X1480 TUBE RECT.150X100X 6X1200 BOUCHON CH-SSIS 150X100 COMPL. SUPPORT CARDAN SUPPORT CARDAN ECROU M10X 1,5 D980 8 ZN VIS M10X1.5X 35 U5737 8.8 ZB

R. ROHR 150X100X 6X1480 R. ROHR 150X100X 6X1200 PFROPFEN RAHMEN 150X100 KOMPL. GELENKWELLE HACKEN HALTER GELENKWELLE - HACKEN MUTTER M10X 1,5 D980 8 ZN SCHRAUBE M10X1.5X35 U5737 8.8

TUBO RECT. 150X100X 6X1480 TUBO RECT. 150X100X 6X1200 TAPËN BASTIDOR 150X100 COMPL. SOPORTE CARDAN SOPORTE CARDAN TUERCA M10X 1,5 D980 8 ZN TORNILLO M8X150 U5737 8.8 ZB

SCREW M 14 X160 5737 8.G

VIS M 14 X160 5737 8.G

SCHRAUBE M 14 X160 5737 8.G

TORNILLO M 14 X160 5737 8.G

TAV. 281 3

2 3 2

11 2

3 5

3 6

VARIANTI PER IMPIANTO BASSA PRESSIONE

24 3

1 - L.3350

7 7

L.3350 - 1

9 16

28 - L.2100

L.1500

3 6

18 29

19 20

2 23

6 11 13 - L.2000

VARIANTI PER CILINDRO DOPPIO STADIO

28 - L.2100 15 - L.1500

13 - L.2000

cod. G19530932

IMPIANTO TELAIO PIEGHEVOLE Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29

G14217120 F03150935 F03151240 F03151237 F03150222 F03150321 F03151223 F03151252 F03150589 F03151213 F05150325 G14217511 G15312621 F03151220 G22280116 F03151211 F03151212 F01020479 F01420060 F01230048 F03150310 F03150859 F03151217 G13811211 F03150211 G22270463 G14219220 G15210541 F03151182

TAV. 281

Descrizione

Description

Benennung

Descripcion

TUBO 3/8R2 CF3/8- M3/8 3350 INNESTO RAP.MASCH.1/2 A VALV. ROS. 17 X23X1,5 RAME -3/8" ROS. 21 X27X1,5 RAME -1/2" NIPPLO MM CIL-CIL 1/2-3/8 ZG NIPPLO MM CIL-CIL 3/8-3/8 ZG RACCORDO VITE CAVA 3/8 STROZZATORE UNIDIREZ.VSRU 3/8 KIT VALVOLA DI BLOCCO 3/8 DE RACCORDO RIDUZIONE M 1/2-F 3/8 CAPPUC.F X INN.M RAP.1/2 ROSSO CILINDRO DOPPIO STADIO SI-MTI TUBO 3/8 R2 F3/8-C3/8 L.2000 RACCORDO -T- MASCHIO 3/8 ZN TUBO 3/8-R2 F3/8-M1/2 MT.1,50 RACCORDO OCCHIO 3/8 D.12 L.300 RACCORDO PROLUNGA CORTA 3/8 ZN VITE M10X1,5X35 U5739 8.8 ZN ROS.M10 10,5X 30X2,5 U6593 ZN DADO M10X 1,5 D982 8 ZN NIPPLO MM CIL-CIL 3/8-1/4 ZN CURVA 90°F.GIREV.1/4 - M.1/4 RACCORDO -T- LATER.M-M-FG 1/4 TUBO X COLLEG. AL TRATTORE NIPPLO MM CIL-CIL 1/2-1/4 ZN TUB.TR.1/4R2 F-F 1/4 L1500 LM CILINDRO DI SPINTA TUBO 1/4R2 CF1/4- F1/4 2100 OCCHIO FILETTATO CONICO 1/4 G

PIPE 3/8R2 CF3/8- M3/8 L.3350 QUICK CONNECT MALE CONE 1/2 COPPER WASHER 17X23X1,5 3/8" COPPER WASHER 21X27X1,5 1/2 NIPPLE M-M CYL-CYL 1/2-3/8 ZN

TUBE 3/8R2 CF3/8- M3/8 L.3350 CONNEXION RAPIDE MALE CONE 1/2 RONDELLE CUIVRE 17X23X1,5 3/8" RONDELLE CUIVRE 21X27X1,5 1/2 NIPPLE H-H CIL-CIL 1/2-3/8 ZN

ROHR 3/8R2 CF3/8- M3/8 L.3350 SCHNELLKUPP.GEWINDE KONISC 1/2 SCHEIBE KUPFER 17X23X1,5 3/8" SCHEIBE KUPFER 21X27X1,5 1/2 NIPPEL M-M CIL-CIL 1/2-3/8 ZN

TUBO 3/8R2 CF3/8- M3/8 L.3350 ACOPLAMIENT.RAP.MACHO CONO 1/2 ARADNDELA COBRE 17X23X1,5 3/8" ARANDELA COBRE 21X27X1,5 1/2 NIPLE H-H CIL-CIL 1/2-3/8 ZN

UNION SCREW 3/8 BI-DIRECTIONAL VENTURI 3/8 PIL. BLOCK VALVE VBPDE38EC M 1/2-F 3/8 CONNECTION PIPE COVER CONNECT F 1/2 RED

VIS 3/8 ETRANGLEUR BIDIRECTIONN. 3/8 SOUPAPE BLOC GUIDEE VBPDE38EC RACCORD REDUCTION FINALEM 1/2COUVERCLE CONNEXION F 1/2 ROSE

SCHRAUBE 3/8 ZWEIS. DROSSEL 3/8 GEST. SPERRVENTIL VBPDE38EC ANSCHLUSS REDUKTIONM 1/2-F 3/8 DECKEL W 1/2 SCHNELLKUPP. ROT

TORNILLO CAVA 3/8 ESTRANGULADOR BIDIRECCION.3/8 VæLVULA BLOQUE PIL.VBPDE38EC UNION REDUCCION M ¢-F 3/8 PAC PROTECCION F 1/2 ROJO

PIPE 3/8 R2 F3/8-C3/8 L2000 MALE T-UNION 3/8 ZN PIPE 3/8-R1 F3/8-M1/2 MT.1-50 EYE UNION 3/8 D.12 L.300 SHORT EXTENSION UNION 3/8 ZN SCREW M10X1,5X35 U5739 8.8 ZN WASHER 10,5X30 NUT M10X 1,5 D982 8 ZN NIPPLE CYL.MALE3/8-1/4 ZN ELBOW 90° F. SWIVEL 1/4 -M.1/4 T M-FG-M LATER.CONNECTION PIPE PIPE FOR CONNECTION TO TRACTOR NIPLE MM CIL-CIL 1/4-1/2 ZN TUBE TR.1/4R2 F-F1/4 L1500 LM CYLINDER

TUBE 3/8 R2 F3/8-C3/8 L2000 RACCORD -T- MALE 3/8 ZN TUBE 3/8-R1 F3/8-M1/2 M. 1-50 RACCORD OEIL 3/8 D.12 L.300 RACCORD RALLONGE COURTE 3/8 ZN VIS M10X1,5X35 U5739 8.8 ZN RONDELLE 10,5X30 ECROU M10X 1,5 D982 8 ZN NIPPLE MALE CYL.3/8-1/4 ZN COUDE 90° F.TOURN.1/4 - M.1/4 RACCORD T M-FG-M 1/4 TUBE POUR CONN. AU TRACTEUR NIPLE MM 1/4-1/2 ZN TUB.TR.1/4R2 F-F 1/4 L1500 LM CYLINDRE

ROHR 3/8 R2 F3/8-C3/8 L2000 ANSCHLUSSTsCK-T-GEWINDE 3/8 ZN ROHR 3/8-R1 F3/8-M1/2 M 1-50 TSENVERBINDUNGSSTsCK 3/8 D.12 ANSCHL.KURZE VERLZNG. 3/8 ZN SCHR. M10X1,5X35 U5739 8.8 ZN SCHEIBE 10,5X30 SCHEIBE M10X 1,5 D982 8 ZN NIPPELZYL.3/8-1/4 ZN KNIESTsCK 90[ F.DREHB.1/4 - M. ANSCHLUSST M-FG-M 1/4 ROHR F. KUPPLUNG AM SCHLEPPER NIPLE GG 1/4-1/2 ZN ROHR1/4R2 F-F 1/4 L1500 LM ZYLINDER

TUBO 3/8 R2 F3/8-C3/8 L2000 UNION -T-MACHO 3/8 ZN TUBO 3/8-R1 F3/8-M1/2 MT.1-50 UNIN OJO 3/8 O.12 L.300 R UNIN PROLONG. CORTA 3/8 ZN P TORN. M10X1,5X35 U5739 8.8 ZN ARANDELA 10,5X30 TUERCA M10X 1,5 D982 8 ZN NIPLE MACHO CIL.3/8-1/4 ZN CURVA 90 F.GIRAT.1/4 - M.1/4 UNION T M-HG-M 1/4 TUBO P/CONEXIN AL TRACTOR T NIPLE MM 1/4-1/2 ZN TUB.TR.1/4R2 F-F 1/4 L1500 LM CILINDRO

CONICAL UNION BOLT HOLLOW 1/4

RACCORD VIS CREUSE 1/4 G CONIQ

ANSCHLUSS GEWINDEHOHLSCHR.1/4

UNIN TORNILLO RANURA 1/4 G C+N

cod. G19530932

TAV. 291

6 2 - SX 42

20 45

33 63 53

43 4

47 32

28 9

16 17

62 61 60

47 35

DX - 1

32 35

Varianti TC - TC varying

Varianti per traccia su ruota trattore Varying trace on the tractor wheels 65 - DX 70

58 57 56 55 54 53 52 51

68 71

12 27

SX - 66

cod. G19530932

SEGNAFILE PER TELAIO PIEGHEVOLE Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71

G14218073 G14218083 F01100011 F02200260 G14218321 G14218112 G14218372 G14218121 G16610222 G14218190 G14218520 G14218210 G14218470 G14218450 G14218750 G14218162 G14218200 G14215840 G14218150 G14218430 G14218460 G14215850 G17111290 G14219030 G17111330 F20120349 F02200229 F20110855 F01020132 F01410124 F05150459 F01020544 G16610210 F01020436 F01020252 G14217050 F01020312 F01020086 F01200306 F02100197 F01230034 F01220048 F20030078 F01230131 F01200270 G20970142 G18700450 F02200226 F02200463 F02100312 G16610180 G18802790 F01200244 G16610160 F04010156 G18801270 F02050370 F03010576 G16610170 F01230098 G16610190 F01060040 F01420048 G16242560 G14218233 G14218243 G14217020 F01020218 G14218982 G14219001 G14218162

TAV. 291

Descrizione

Description

Benennung

Descripcion

SUPPORTO DX LUNGO SUPPORTO SX LUNGO ING.M 6X1 7663-A 9SMNPB28 ZN COPIGLIA 8X 60 U1336 ZN BRACCIO SPINTA SECONDO BRACCIO TESTA TERZO BRACCIO TUBO TERZO BRACCIO MONT.DISCO D.320 LIM. SPINA ROTAZIONE ZN TIRANTE ROTAZIONE REGOLAZIONE TIRANTE ASTA ROTAZIONE SUP. ASTA ROTAZIONE INF. SPINA D.20 X124 ZN TIRANTE ROTAZIONE SPINA DI SPINTA ZN TIRANTE SEGNAFILE PIASTRINA FISSAGGIO CILINDRO ASTA ROTAZIONE INFERIORE ASTA ROTAZIONE SUPERIORE SPINA 20 X194 ZN MANICOTTO DISCO SUPPORTO ESTERNO DISCO SCONTRO 90X70 -10 4F11 66X46 PUNTALE Q.50 ALETT.POLIT.NERO COPIGLIA 5X 45 U1336 ZN CAV.T.M10X 1,5X 25 46X58,5 ZN VITE M10X1,5X 90 U5737 10.9 ZD ROS.M20 21X 37X 3 U6592 ZN PARACOLPI CIL.75X25 M12 SH70 VITE M14X2X40 U5739 8.8 ZN ASS.LIMITATORE PROFONDITA' VITE M 8X1,25X 20 U5739 8.8 ZN VITE M16X2X50 U5737 8 8 ZN TIRANTE SUPPORTO SEGNAF. VITE M20X2,5X100 U5737 8.8 ZN VITE M 8X1,25X80 U5737 8.8 ZN DADO M14X 2 U5588 6.8 ZN SPINA E.P. 14X 50 U6873 C70 BR DADO M 8X1,25 D982 8 DADO M12X1,75 D980 8 ZN DECALCOM.CADUTA UTENSILI DADO M20X 2,5 D982 6 ZN DADO M10X 1,5 U5588 6.8 ZN RONDELLA 32X4X15,5 RONDELLA 17 X45 X6 ZN COPIGLIA 5X 25 U1336 ZN SPINA SCATTO D. 5 B/81 ZN SPINA DI SICUREZZA D.8X45 ZN PERNO REGGIDISCO SEGNAF. BOCCOLA 25 X20 X7 ZN B. DADO M 8X1,25 U5588 6.8 ZN SUPP.CUSCINETTI DISCO SEGN.ZN. CUSC.d20 D47 B14 6204 2RSH BOCCOLA 21 X25 X12 ZN ANELLO E. DI 47X1,75 U7437 C70 ANELLO OR 50,52X1,78 NBR DISCO SEGNAFILE D.320 DADO M18X 2,5 D982 8 ZN CHIUSURA CUSCINETTO ZN VITE M8X1,25X20 U5732 4.6 ZG ROS.M8 8,4X 24X 2 U6593 ZN PARACOLPI 30X8 M8X30 SUPPORTO DX CORTO SUPPORTO SX CORTO BOCCOLA 15 X35 X80 VITE M14X2X130 U5737 8.8 ZN SECONDO BRACCIO CORTO TUBO TERZO BRACCIO CORTO TIRANTE ROTAZIONE

RIGHT SUPPORT LONG LEFT SUPPORT LONG GREASE NIPPLE M6X1 7663-A ZN SPLIT PIN 8 X60 1336 ZN PRESS. ARM 2.ARM ARM COUPLING THIRD ARM TUBE ROWMARKET DISC D.320 ASSEMBLY ROTATION PIN ZN ROTATION TIE ROD TIE ROD ADJUSTMENT UPPER ROTATION ROD LOWER ROTATION ROD GALVANIZED PIN D.20 X124

SUPPORT DRT LONG SUPPORT GCH LONG GRAISS. A BILLE M6X1 7663A ZN GOUPILLE 8 X60 1336 ZN POUSSEE BRAS 2.BRAS FIXATION BRAS TUBE TROISIEME BRAS

HALTERUNG RE LANGES HALTERUNG LI LANGES SCHMIERBUECHE M6X1 7663-A ZN SPLINT 8 X60 1336 ZN ARMSCHUB 2.ARM ARMKUPPLUNG ROHR DRITTER ARM

SOPORTE DER LARGO SOPORTE IZQ LARGO ENGRAS. DE ESFERAS M6X1 7663-A PASADOR 8 X60 1336 ZN APRIETE BRAZO 2.ARM CONEXIËN BRAZO TUBO TERCER BRAZO

GOUPILLE ROTATION ZN TRINGLE ROTATION REGLAGE TIRANT TIGE DE ROTATION SUP. TIGE DE ROTATION INF. GOUPILLE D.20 X124 ZN

ROTATIONSSTIFT ZN ROTATIONS SPANNSTANGE SPANNSTANGENSTELLUNG ROTATIONSTANGE OBEN ROTATIONSTANGE UNTEN STIFT D.20 X124 ZN

PASADOR ROTACIËN ZN ROTATIONS SPANNSTANGE REGULACIËN TIRANTE VARILLA DE ROTACIËN SUPERIOR VARILLA DE ROTACIËN INFERIOR CLAVIJA D.20 X124 ZN

PRESS. PIN ROWMARKER TIE ROD SECURING PLATE LOWER ROTATION ROD UPPER ROTATION ROD GALVANIZED PIN 20 X194 DISK SLEEVE U BOLT DISC EXT. SUPPORT STOP TEETH 90X70 -10 4F11 66X4 CAP SPLIT PIN 5X 45 U1336 ZN

POUSSEE BROCHE TRINGLE TRACEUR PLAQUE FIXATION TIGE DE ROTATION INF. TIGE DE ROTATION SUP. GOUPILLE 20 X194 ZN MANCHON DISQUE SUPPORT EXT. DISQUE BUT+E 90X70 -10 4TROUS 11 66X4 BOUCHON GOUPILLE 5 X45 1336 ZN

STIFTSCHUB SPANNSTANGE SPURREISSER BEFESTIGUNGSPLATTE ROTATIONSTANGE UNTEN ROTATIONSTANGE OBEN STIFT 20 X194 ZN SCHEIBENMUFFE ZUSSERE HALTERUNG SCHEIBEN ANSCHLAG 90X70 -10 4F11 66X46 DECKEL SPLINT 5X 45 U1336 ZN

APRIETE CLAVIJA TIRANTE MARCADOR DE FILAS PLACA FIJACI-N VARILLA DE ROTACIËN INFERIOR VARILLA DE ROTACIËN SUPERIOR CLAVIJA 20 X194 ZN MANGUITO DISCO SOPORTE EXT. DISCO DIENTE DE PARADA 90X70 -10 4F1 CORCHO PASADOR 5 X45 U1336 ZN

SCREW M10X1,5X90 U5737 10.9 ZN WASHER M20 21X37X3 U6592 ZN BUFFER-CYL. 75X25 M12 781103 BOLT M14X2X40 LIMITER DEPTH COUPLYNG SCREW M8X1,25X20 U5739 8.8 ZN SCREW M16X 2X 50 U5737 8.8 ZN ROW MARKER SUPPORT TIE ROD SCREW M20X2,5X100 U5737 8.8 ZN BOLT M8X1X80 NUT M14X2 PIN E.P. 14X 50 U6873 C70 BR SELF LOCK.NUT M8X1,25 D982 8ZN NUT M12X1,75 D980 8 ZN ôTOOLS FALLING DOWNö TRANSFER NUT M20X 2,5 D982 6 ZN NUT M10X 1,5 U5588 6.8 ZN WASHER 32X4X15-5 WASHER 17X45X6 ZN SPLIT PIN 5 X25 1336 GALVAN. SNAP PIN D5 B/81 ZN SAFETY PIN D.8X45 ZN ROWMAKER DISC-HOLDER PIN BUSHING 25 X20 X7 ZN B. NUT M8 X1,25 U5588 6.8 ZN GALVAN. ROWMARKER DISK BEARING BEARING d20 D47 B14 6204 2RSH

VIS M10X1,5X90 U5737 10,9 ZN RONDELLE M20 21X37X3 U6592 ZN TAMPON CIL. 75X25 M12 781103 VIS M14X2X40 GR. ASS. LIMITEUR DE PROFONDEU VIS M8X1,25X20 U5739 8.8 ZN VIS M16X 2X 50 U5737 8.8 ZN TRINGLE SUPPORT TRACEUR VIS M20X2,5X100 U5737 8.8 ZN VIS M8X1X80 ECROU M14X2 GOUPILLE E.P. 14X50 U6873 C70 ECROU AUTOBL.M8X1,25 D982 8 ZN ECROU M12X1,75 D980 8 ZN DECALC. CHUTE OUTILS ECROU M20X 2,5 D982 6 ZN ECROU M10X 1,5 U5588 6.8 ZN RONDELLE 32X4X15-5 RONDELLE 17X45X6 ZN GOUPILLE 5 X25 1336 ZN FICHE A DETENTE D5 B/81 ZN FICHE EL.DE SECURITE D.8X45 ZN PIVOT PORTE-DISQUE TRACEUR BOITE 25 X20 X7 ZN B. ECROU M8 X1,25 U5588 6.8 ZN SUPPORT ROULEMENTS DISQUE TRAC

SCHRA.M10X1,5X90 U5737 10,9 ZN SCHEIBE M20 21X37X3 U6592 ZN PUFFER ZYL. 75X25 M12 781103 SCHRAUBE M14X2X40 TIEFENBEGRENZERKOMPLEX SCHRA. M8X1,25X20 U5739 8.8 ZN SCHRAUBE M16X2X50 U5737 8.8 ZN SPANNSTANGE HALTERUNG SPURR. SCHRA.M20X2,5X100 U5737 8.8 ZN SCHRAUBE M8X1X80 MUTTER M14X2 SPANNSTIFT E,P,14X50 6873 C70 SELBST.MUTT.M8X1,25 D982 8 ZN SCHEIBE M12X1,75 D980 8 ZN AUFKLEBERABSTURZ WERKZEUGE MUTTER M20X 2,5 D982 6 ZN MUTTER M10X 1,5 U5588 6.8 ZN UNTERLEGSCHEIBE 32X4X15-5 SCHEIBE 17X45X6 ZN SPLINT 5 X25 1336 ZN EINRASTSTIFT D5 B/81 ZN SCHERSTIFT D.8X45 ZN SCHEIBENTRAGBOLZEN B_CHSE 25 X20 X7 ZN B. MUTTER M8 X1,25 U5588 6.8 ZN SCHEIBENLAGERHALTERUNG

TORN. M10X1,5X90 U5737 10,9 ZN ARANDELA M20 21X37X3 U6592 ZN PARACHOQ. CIL.75X25 M12 781103 TORNILLO M14X2X40 CONJ. LIMITADOR DE PROFUNDIDAD TORN. M8X1,25X20 U5739 8.8 ZN TORNILLO M16X2X50 U5737 8.8 ZN TIRANTE SOPORTE MARCADOR TORN. M20X2,5X100 U5737 8.8 ZN TORNILLO M8X1X80 DADO M14X2

SEEGER RING 47X 1,75 U7437 C70 GASKET OR 50,52X1,78 NBR ROW MARKER DISK D.320 NUT M18X 2,5 D982 8 ZN

SEEGER E. 47X 1,75 U7437 C70 BAGUE OR 50,52X1,78 NBR DISQUE TRACEUR D320 ECROU M18X 2,5 D982 8 ZN

SEEGERING E. 47X1,75 U7437 C70 RING OR 50,52X1,78 NBR SPURREISSERSCHEIBE D. 320 MUTTER M18X 2,5 D982 8 ZN

ANILLO E. 47X 1,75 U7437 C70 ANILLO OR 50,52X1,78 NBR DISCO MARCARDOR DE FILAS O 320 TUERCA M18X 2,5 D982 8 ZN

SCREW M8X1,25X20 U5732 4.6 ZN WASHER M8 8,4X 24X 2 U6593 ZN BUFFER 30X8 M8X30 RIGHT SUPPORT SHORT LEFT SUPPORT SHORT BUSHING 15 X35 X80 SCREW M14X 2X130 5737 8.8 ZN

VIS M8X1,25X20 U5732 4.6 ZN RONDELLE M8 8,4X 24X2 U6593 ZN PARE-CHOCS 30X8 M8X30 SUPPORT DRT COURT SUPPORT GCH COURT BOITE 15 X35 X80 VIS M 14X130

SCHRA. M8X1,25X20 U5732 4.6 ZN SCHEIBE M8 8,4X 24X 2 U6593 ZN STOSSDZMPFER 30X8 M8X30 HALTERUNG RE KURZER HALTERUNG LI KURZER B_CHSE 15 X35 X80 SCHRAUBE M 14X130

TORN. M8X1,25X20 U5732 4.6 ZN ARANDELA M8 8,4X 24X2 U6593 ZN PARAGOLPES 30X8 M8X30 SOPORTE DER CORTO SOPORTE IZQ CORTO CASQUILLO 15 X35 X80 TORNILLO M 14X130

THIRD ARM TUBE SHORT

TUBE TROISIEME BRAS COURT

ROHR DRITTER ARM KURZER

TUBO TERCER BRAZO CORTO

cod. G19530932

TUERCA AUTO. M8X1,25 D982 8 ZN TUERCA M12X1,75 D980 8 ZN ETIQUETA ADHES. CAIDA HERRAMIE TUERCA M20X 2,5 D982 6 ZN TUERCA M10X 1,5 U5588 6.8 ZN ARANDELA 32X4X15-5 ARANDELA 17X45X6 ZN PASADOR 5 X25 1336 ZN CLAVIJA DE MUELLE D5 B/81 ZN CLAVIJA DE SEGURIDAD D 8X45 ZN PERNO SOPORTE DISCO MARCAFILA CASQUILLO 25 X20 X7 ZN B TUERCA M8 X1,25 U5588 6.8 ZN SOPORTE COJINETE DE DISCO MARC

TAV. 311

2 6

22 23

11 5

15 9

14 15

3 2

cod. G19530932

IMPIANTO SEGNAFILE PER TELAIO PIEGHEVOLE Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

G14218300 F01500012 G16011690 G16012650 F03150266 F03151226 F03150859 G14218300 G13811211 G22270463 F03151245 F03150211 F03151237 F03150935 F05150325 F03151216 F05010359 G16611050 G19702880 G14217082 F01020068 F01410051 F01200244

TAV. 311

Descrizione

Description

Benennung

Descripcion

CILINDRO SEGNAFILE RONDELLA IN RAME 1/4" NIPPLO MM 1/4-1/4 FORO 1,0 TUBO R2 1/4 C-F L.4000 NIPPLO MM CIL-CIL 1/4-1/4 ZN REGOL.DI FLUSSO VRF 1/4' GAS CURVA 90°F.GIREV.1/4 - M.1/4 CILINDRO SEGNAFILE TUBO X COLLEG. AL TRATTORE TUB.TR.1/4R2 F-F 1/4 L1500 LM RUBINETTO F-F 1/4 NIPPLO MM CIL-CIL 1/2-1/4 ZN ROS. 21 X27X1,5 RAME -1/2" INNESTO RAP.MASCH.1/2 A VALV. CAPPUC.F X INN.M RAP.1/2 ROSSO RACCORDO -T- CENTR.M-FG-M 1/4 PASSAPARETE 1/4M-1/4M VALVOLA SEGNAFILE CN COMPL DECAL.MOVIMENT.SEGNAFILE SUPPORTO VALVOLA VITE M 8X1,25X40 U5737 8.8 ZN ROS.M8 8,4X 17X1,6 U6592 ZN DADO M 8X1,25 U5588 6.8 ZN

ROW MARKER CYLINDER WASHER 13 X19X1,5 - 1/4" UPRIGHT 1/4'' NIPPLE WITH GRUB PIPE 1/4 R2 C-F 1/4 L.4000 NIPPLE GALV.CYL.MALE 1/4 ZN 1/4' GAS VALVE VRF ELBOW 90° F. SWIVEL 1/4 -M.1/4 ROW MARKER CYLINDER PIPE FOR CONNECTION TO TRACTOR TUBE TR.1/4R2 F-F1/4 L1500 LM COCK F.-F. 1/4" NIPLE MM CIL-CIL 1/4-1/2 ZN COPPER WASHER 21X27X1,5 1/2 QUICK CONNECT MALE CONE 1/2 COVER CONNECT F 1/2 RED UNION T M-M-F 1/4' ZN PASS WALL 1/4M -1/4M ROWMARKER VALVE ASSY. STICKER VALVE SUPPORT SCREW M8X1,25X40 U5737 8.8 ZN WASHER M8 8,4X17X1,6 U6592 ZN NUT M8 X1,25 U5588 6.8 ZN

CYLINDRE TRACEUR RONDELLE MONTANT NIPPLE 1/4 AVEC GRAIN TUBE 1/4 R2 C-F 1/4 L. 4000 NIPPLE MALE CYL. 1/4 ZN SOUPAPE REG DEBIT VRF 1/4" GAZ COUDE 90° F.TOURN.1/4 - M.1/4 CYLINDRE TRACEUR TUBE POUR CONN. AU TRACTEUR TUB.TR.1/4R2 F-F 1/4 L1500 LM ROBINET F.-F. 1/4" NIPLE MM 1/4-1/2 ZN RONDELLE CUIVRE 21X27X1,5 1/2 CONNEXION RAPIDE MALE CONE 1/2 COUVERCLE CONNEXION F 1/2 ROSE RACCORD T M-M-F ª' ZN

SYLINDER REIHENANREISSER SCHEIBE STZNDER NIPPEL 1/4 MIT STIFT 8 ROHR 1/4 R2 C-F 1/4 L 4000 NIPPELZYL.1/4 ZN VENITL VRF 1/4' GAS KNIESTsCK 90[ F.DREHB.1/4 - M. SYLINDER REIHENANREISSER ROHR F. KUPPLUNG AM SCHLEPPER ROHR1/4R2 F-F 1/4 L1500 LM HAHN F.-F. 1/4" NIPLE GG 1/4-1/2 ZN SCHEIBE KUPFER 21X27X1,5 1/2 SCHNELLKUPP.GEWINDE KONISC 1/2 DECKEL W 1/2 SCHNELLKUPP. ROT ANSCHLUSSTsCK TM-M-F 1/4' ZN

CILINDRO MARCADOR DE FILAS ARANDELA MONT.NIPLE 1/4 TORNIL.SIN CABE TUBO 1/4 R2 C-F 1/4 L.4000 NIPLE MACHO CIL.1/4 ZN VæLVULA VRF 1/4' GAS CURVA 90 F.GIRAT.1/4 - M.1/4 CILINDRO MARCADOR DE FILAS TUBO P/CONEXIN AL TRACTOR T TUB.TR.1/4R2 F-F 1/4 L1500 LM GRIFO H.-H. 1/4" NIPLE MM 1/4-1/2 ZN ARANDELA COBRE 21X27X1,5 1/2 ACOPLAMIENT.RAP.MACHO CONO 1/2 PAC PROTECCION F 1/2 ROJO UNIN T M-M-F 1/4' ZN R

SOUPAPE TRACEUR COMPL. DECALCOMANIE SUPPORT SOUPAPE VIS M 8X1,25X40 U5737 8.8 ZN RONDEL. M8 8,4X17X1,6 U6592 ZN ECROU M8 X1,25 U5588 6.8 ZN

KOMPL. SPURREISSERVENTIL ABZIEHBILDER VENTILHALTERUNG SCHRA. M8X1,25X40 U5737 8.8 ZN SCHEIBE M8 8,4X17X1,6 U6592 ZN MUTTER M8 X1,25 U5588 6.8 ZN

V-LVULA MARC. DE FILAS COMPL CALCOMANIAS SOPORTE V+LVULA TORNIL.M8X1,25X40 U5737 8.8 ZN ARANDELA M8 8,4X17X1,6 U6592ZN TUERCA M8 X1,25 U5588 6.8 ZN

cod. G19530932

TAV. 091

25 26

24 18 22 21

20 19

8 69 13

FS - 57 29

4 31

DR - 60

39 40

34 37 45 21

31 47

TR - 63

38 FS - 56

66 48

DR - 59

50 4

67 TR - 62

FS - 58 DR - 61

2 1

TR - 64

cod. G19530932

DISTRIBUTORE SEMI Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69

G15826062 G19005920 F06220037 F01200244 G15829600 F01070047 G19004640 F01020383 F01410023 G18904240 G19004880 F01230019 F01020429 G15826052 G19005610 F01020452 G15828220 F02050649 G22250145 G15825840 G18901220 G19002121 F01030011 F01070049 G19004580 F05100190 G19203870 F02200463 G15827421 F02050056 F04010308 F02050293 G15829490 G10521111 F02050651 F01410011 G19004650 F01040060 G15826040 F06220036 G10521094 G15828430 G15828391 G15882120 G19005620 F01030055 G18701890 G15828290 F01070078 F01430059 G16620470 F03151196 G15882430 G19006100 G19006090 G19004891 G19005530 G19005930 G19005022 GA5820110 G19005940 G19005880 G19005550 G19005950 G19006350 G15881540 G15881550 G15882540 G65338044

Descrizione COPERCHIO CORPO DISTR.R1"LAV." GUARNIZIONE COPERCHIO VOLANTINO ZIGR.D.26-M8 FEM DADO M 8X1,25 U5588 6.8 ZN GRUPPO SELETTORE COMPL VITE M3,5X1,34X9,5 U6954 4.8NI FINESTRA LIVELLO SEME "R" VITE M5X0,8X30 U5739 8.8 ZN ROS.M5 5,3X 10X 1 U6592 ZN MOLLA APERTURA PORTA CONTROLLO FINESTRA DISTRIBUTORE DADO M 5X 0,8 D982 8 ZN VITE M 8X1,25X14 U5739* 8.8 ZN CORPO DISTRIBUTORE R1 "LAVOR." COPERCHIO TRAMOGGIA DISTRIBUT. VITE M 8X1,25X50 U5739 8.8 ZN PERNO COPERCHIO DISTRIB.ZN FISSATORE ELAST.ALBERO D.3 S.S PUNTA SELETTORE ECCENTRICO SV SUPPORTO SELETTORE SEM.ORTAG. MOLLA COMP.SELETT.ECCEN. SV POMELLO GRADUATO SELET.ECC.SV VITE M4X0,7X10 U5933 10.9 ZD VITE M3,5X1,27X13 U6954 4.8NI SCATTO SELETTORE DR "R" TAPPO FORO SELETTORE > PORTELLINO ISPEZIONE DISCO SPINA SCATTO D. 5 B/81 ZN INGRANAGGIO Z.15 COMPL. ANELLO E. DE 17X 1 U7435 C70 CUSC.D17 D30 B7 61903 2RS1> ANELLO E. DI 30X 1,2 U7437 C70 PERNO ESPULSORE PRIGIONIERO CORPO DISTR. ANELLO E. DE 10X 1 U7435 C70 ROS.M4 4,3X 9X0,8 U6592 ZN GUARNIZIONE SEME "R" VITE M6X1X14 U5931 8.8 ZN PORTELLO ALIMENTAZIONE VOLANTINO ZIGR. D.15-M5 X10 > SUPPORTO AGITATORE ORIETTA ASS.AGITATORE R TRASCINATORE DISCO ZN CERNIERA COPERCHIO IX GUARNIZIONE CAVA DISCO "R" VITE M 8X1,25X20 U5933 10.9 ZD RONDELLA D.8,5 SVASATA ZN. CAPPELLOTTO TENUTA GUARNIZ.DR VITE M4,2X1,41X13 U6950 4.8ZN ROS.M8 8,4X 15X0,8 U8842J ZN TAPPO CENTRALE H=7,5 RACC.SUPERAPIDO 90° 1/8G-8 PIASTA RINF.COPERCHIO TRAM. IX COPERCHIO RIALZO TRAMOGGIA ESPULSORE SEME FS ORIETTA PATTINO SELETTORE FS TASSELLO FS ESPULSORE SEME DR ORIETTA PATTINO SELETTORE DR LAV. TASSELLO DR ESPULSORE SEME 3F PATTINO SELETTORE 3F TASSELLO TR PATTINO DISCO CARTERINO ESPULSORE DR CARTERINO ESPULSORE TR ASSE FISS.COPERCHIO RIALZO IX MOLLA COMP.ZN PRESS.SELETT. SV

cod. G19530932

TAV. 091 Description

Description

Benennung

Descripcion

NUT M8 X1,25 U5588 6.8 ZN

ECROU M8 X1,25 U5588 6.8 ZN

MUTTER M8 X1,25 U5588 6.8 ZN

EMPAQUES DE CUBIERTA FOLLETO ZIGR.D.26-M8 TUERCA M8 X1,25 U5588 6.8 ZN

BOLT 3-5X 9-5 DIN 7981 SEED LEVEL OPENING "R" SCREW M5X 0,8X 30 U5739 8.8 ZN WASHER D5 UNI 6592 ZN SPRING DISTRIBUTOR OPENING NORM.SELF-LOCKING NUT 5 GALVAN BOLT 8X14 5739 8.G GALVANIZ.

VIS 3-5X 9-5 DIN 7981 FENETRE DE NIVEAU DES GRAINES VIS 5X30 5739 8.G ZN RONDELLE D5 UNI 6592 ZN RESSORT FENETRE DISTRIBUTEUR ECROU AUTOB.NOR.5 ZN VIS 8X14 5739 8.G ZN

SCHRAUBE 3-5X 9-5 DIN 7981 SAMENINSPEKTIONSFENSTER "R" SCHRAUBE 5X30 5739 8.G ZN UNTERLEGSCHEIBE D5 UNI 6592 ZN FEDER VERTEILERFENSTER SELBSTSP. MUTTER NOR.5 ZN SCHRAUBE 8X14 5739 8.G ZN

TORNILLO 3-5X 9-5 DIN 7981 VENTANA DE NIVEL SEMILLAS TORNILLO 5X30 5739 8.G ZN ARANDELA D5 UNI 6592 ZN MUELLE VENTANA DISTRIBUIDOR TUERCA AUTOB. NOR. 5 ZN TORNILLO 8X14 5739 8.G ZN

SEED DISTRIBUTOR COVER SCREW M8X1,25X50 U5739 8.8 ZN DISTRIBUTOR COVER PIN D.3 S.S ELASTIC SHAFT FASTENE

VIS M8X1,25X50 U5739 8.8 ZN PIVOT COUVERCLE DISTRIBUTEUR FIXATEUR ELAST. ARBRE D.3 S.S

SCHRA. M8X1,25X50 U5739 8.8 ZN BOLZEN DECKEL SZAPPARAT WELLE, ELASTISCHE BEFESTIGUNG

TORN. M8X1,25X50 U5739 8.8 ZN PERNO TAPA DISTRIBUDOR FIJADOR EL-STICO -RBOL D.3.S.S SELECTOR EXCENTRICO SV

BOLT 3,5X1,27X 13 6954 4.8NI

VIS 3,5X1,27X 13 6954 4.8NI

SCHRAUBE 3.5X1.27X 13 6954 4.8

TORNILLO 3.5X1.27X 13 6954 4.8

SELECTOR HOLE PLUG DISC INSPECTION DOOR SNAP PIN D5 B/81 ZN

BOUCHON TROU SELECTEUR

PFROPFEN LOCHWZLER

TAPN AGUJERO SELECTOR

FICHE A DETENTE D5 B/81 ZN

EINRASTSTIFT D5 B/81 ZN

CLAVIJA DE MUELLE D5 B/81 ZN

SEEGER RING E. 17X 1 U7435 C70 BEARING 61903-2RS1 SEEGER RING 30X1,2 U7437 C70

SEEGER E. 17 X 1 U7435 C70 PALIER 61903-2RS1 SEEGER E. 30X 1,2 U7437 C70

SEEGERING E. 17X 1 U7435 C70 LAGER 61903-2RS1 SEEGERING E. 30X 1,2 U7437 C70

INEL E 17X 1 U7435 C70 COJINETE 61903-2RS1 ANILLO E. 30 X1,2 U7437 C70

DISTR. CASING STUD BOLT . SV SEEGER RING ARR.10 U7435-75 PLANE WASHER 4,5X 9 6592 SEED SEAL "R" BOLT 6X14 5931 8.G GALVANIZED POWER FLAP KNURLED FLYWHEEL D.15-M5 X10 AGITATOR SUPPORT ORIETTA

PRISONNIER CORPS DISTRIB. SEEGER ARR. 10 UNI 7435-75 RONDELLE 4,5X 9 6592 GARNITURE GRAINES "R" VIS 6X14 5931 8.G ZN PORTILLON ALIMENTATION VOLANT CANNEL+ D.15-M5 X10

STIFTSCHRAUBE SZAPPARATKTRPER SEEGERING ARR.10 UNI 7435-75 SCHEIBE 4,5X 9 6592 SAMEN DIHCHTUNG "R" SCHRAUBE 6X14 5931 8.G ZN ZUF_HRUNGSDECKEL GER-ND. HANDRAD D.15-M5 X10

TIRANTE CUERPO DISTR. ANILLO ARR.10 UNI 7435-75 ARANDELA 4,5X 9 6592 JUNTA SEMILLAS "R" TORNILLO 6X14 5931 8.G ZN REGISTRO ALIMENTACIËN VOLANTE ESTR. D.15-M5 X10

GASKET FOR DISC R SCREW M8X1.25X20 U5933 10.9 ZD FLARED WASHER D.8.5 ZN.

VIS M 8X20 RONDELLE D.8,5 +VAS+E ZN.

SCHRAUBE M 8X20 F-CHERSCHEIBE D.8,5 ZN.

TORNILLO M 8X20 ARANDELA Ï 8,5 ABOCINADA ZN.

SELFTHREADING BOLT 4,2X13 TE WASHER M8 8,4X15X0,8 U8842J ZN CENTRAL PLUG H=7.5

VIS AUTOTARADEUSE.4-2X13 TE ROND. M8 8,4X 15X0,8 U8842J ZN BOUCHON CENTRAL H=7,5

SELBSTSCHNEID. SCHRAUBE 4-2X13 SCHEIBE M8 8,4X15X0,8 U8842JZN ZENTRALER PFROPFEN H=7,5

TORNILLO AUTOR.4-2X13 TE ARAND. M8 8,4X15X0,8 U8842J ZN TAPËN CENTRAL H=7,5

SEED EJECTOR SR ORIETTA ANCLA FS SEED EMISSION DR ORIETTA CAP DOUBLE ROW

ZN SELCT. PRESS. COMP. SPRING

RESSORT COMPL. ZN PRESS. SELEC

DRUCKFEDER ZN WZHLERDRUCK SV

MUELLE COMP.ZN PRES. SELECT. S

TAV. 101

21 49

60 61 45 63 62

17 15

14 5

51 56

59 50

55 56

52 48

18 23

69 68

19 39

54 26 25

10 55

46 22

57 76

56 OPTIONAL

9 34 44

31 41 75

26 37 32 36

cod. G19530932

TELAIO ELEMENTO Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55

F01020170 G66349003 G22250405 G15828250 G15827900 F01220048 F01020432 G14820991 F01200244 G19003400 F02200363 G18903140 G15827930 G65336100 F06080223 G15881270 F01070011 F01020440 F01420048 G20980050 F01200306 F02250077 G65337035 F02200165 F01030056 G15821110 G16610010 G15829970 G15829820 F01200270 G19006460 F01020472 G15881090 F01200232 G19005300 G15881080 G15829960 G15110091 G19005110 G18902520 F01020403 G18801450 G15829790 F01230034 F02050615 F06220010 G22230063 G22230062 F01410088 F02100109 G22270235 G15827940 G15829681 G18902880 G20980082

TAV. 101

Descrizione

Description

Benennung

Descripcion

VITE M12X1,75X100 5737 8.8 ZN BOCCOLA SINT. PERNO BRACCIO INFERIORE SV/2 ATTACCO TELAIO BRACCIO SUP.PARALLELOGRAMMA DADO M12X1,75 D980 8 ZN VITE M 8X1,25X16 U5739 8.8 ZN FERMO REGOLAZIONE DADO M 8X1,25 U5588 6.8 ZN ASTA INDICAZIONE PROFONDITA' COPIGLIA R 3X 62 ZN MOLLA GUIDATUBO CARTER ANT. MOLLA SPEC.FERMO MANIGLIA SP SP.CAT.1/2-3/16 108M.ISO 083-1 CARTER LATERALE VITE M4,2X1,41X9,5 U6950 4.8NI VITE M 8X1,25X25 U5739 8.8 ZN ROS.M8 8,4X 24X 2 U6593 ZN BOCCOLA 15X7X8,5 ZN DADO M14X 2 U5588 6.8 ZN RIVETTO STR. 3X 14 U9200A AL MOLLA TENDICATENA RUOTA DP COPIGLIA 3X 35 U1336 ZN VITE M 8X1,25X25 U5933 10.9 ZD BOCCOLA SUPPORTO COPRISEME VITE A MARTELLO M14X165 ATTACCO DX MOLLA COPRISEME BRACCIO BILANCIERE DADO M10X 1,5 U5588 6.8 ZN DISTANZIALE D15-25X45 VITE M10X1,5X25 U5739 8.8 ZN COPRISEME DX DADO M 6X 1 U5588 6.8 ZN DISTANZIALE 15X22X4,5 COPRISEME SX ATTACCO SX MOLLA COPRISEME SCONTRO A U RULLO TENDICATENA MOLLA TRAZ.ZN RASCHIATERRA VITE M6X1X16 U5739 8.8 ZN BOCCOLA 8,25 X18 X17 ASS.TELAIETTO SEMINATORE DADO M 8X1,25 D982 8 ANELLO E. DE 28X 1,5 U7435 C70 VOLANTINO 4 LOBI M12X25 ELEMENTO ARTICOLATO VITE DI REGOLAZIONE ROS.M14 15X 28X2,5 U6592 ZN SPINA E.P. 6X 24 U6873 C70 BR MANIGLIA REGOLAZIONE B4 BRACCETTO INF. ASTA AGGANCIO MOLLA FERMO PARALLELO SP BOCCOLA 18X7X12,25

SCREW M12X1,75X100 5737 8.8 ZN BUSHING- SINTERED PIN- LOWER ARM SV/2 FRAME COUPLING

VIS M12X1,75X100 5737 8.8 ZN BOITE FRITTEE PIVOT BRAS INF. SV/2 FIXATION BATI

SCHRA.M12X1,75X100 5737 8.8 ZN SYNTH. BUECHSE ZAPFEN UNTERER ARM SV/2 KUPPLUNG RAHMEN

TORN. M12X1,75X100 5737 8.8 ZN CASQUILLO SINT. PERNO BRAZO INFERIOR SV/2 CONEXIN BASTIDOR

NUT M12X1,75 D980 8 ZN SCREW M8X 1.25X16 U5739 8.8 ZN ADJUSTMENT STOP NUT M8 X1,25 U5588 6.8 ZN DEPTH INDICATING ROD SPRING SPLIT PIN 3X 62 ZN PIPE GUIDE SUPPORT

ECROU M12X1,75 D980 8 ZN VIS M 8X16 BUTEE REGLAGE ECROU M8 X1,25 U5588 6.8 ZN TIGE INDICATION PROFONDEUR GOUPILLE R 3X62 RESSORT GUIDE-TUBE

SCHEIBE M12X1,75 D980 8 ZN SCHRAUBE M 8X16 EINSTELLUNGSSPERRE MUTTER M8 X1,25 U5588 6.8 ZN TIEFENANZEIGESTAB SPLINT R 3X62 FEDER ROHRFsHRUNG

TUERCA M12X1,75 D980 8 ZN TORNILLO M 8X16 BLOQUEO REGULACIËN TUERCA M8 X1,25 U5588 6.8 ZN VARILLA INDICACIÓN PROFUNDIDAD CHAVETA R 3X62 MUELLE GUA TUBOS A

SPEC SPRING HANDLE STOP SP

RESSORT SPEC. ARRET POIGNEE SP

SPEZIALFEDER GRIFFSPERRE SP

MUELLE ESPEC. BLOQUEO MANIJA S

BOLT- SELF-TAPPING 4-2X9-5T.E. BOLT M8X1,25X25 U5739 8.8 ZN WASHER M8 8,4X 24X 2 U6593 ZN BUSHING 15X7X8-5 ZN NUT M14X2 3X14 ALUMINIUM PULL RIVET

VIS AUTOTAR. 4-2X9-5 T. E. COU VIS M8X1,25X25 U5739 8.8 ZN RONDELLE M8 8,4X 24X2 U6593 ZN BOITE 15X7X8-5 ZN ECROU M14X2 RIVET A RUPTURE 3X14 ALUMINIUM

SELBSTSCHNEID. SCHRAUBE 4-2X9SCHRA. M8X1,25X25 U5739 8.8 ZN SCHEIBE M8 8,4X 24X 2 U6593 ZN BsCHSE 15X7X8-5 ZN MUTTER M14X2 REISSNIETE3X14 ALL.

SPLIT PIN 3 X35 1336 GALVAN. BOLT 8X25 5933 10.9 GALVANIZED SEED COVER SUPP. BUSHING WINGED SCREW M14X165

GOUPILLE 3 X 35 1336 ZN VIS 8X25 5933 10.9 ZN BOITE SUPPORT COUVRE-SEMENCE VIS A TETE MARTEAU M14X165

SPLINT 3 X35 1336 ZN SCHRAUBE 8X25 5933 10.9 ZN BsCHSE SAMENABDECKERHALTER. ZWEIFLÜGEL- SCHRAUBEN M14X165

TORNILLO AUTORROSC. 4-2X9-5 TORNIL.M8X1,25X25 U5739 8.8 ZN ARANDELA M8 8,4X 24X2 U6593 ZN CASQUILLO 15X7X8-5 ZN DADO M14X2 REMACHE DESGAR. 3X14 ALL. RESORTE TENSION CADENA DE RUED PASADOR 3 X35 1336 ZN * TORNILLO 8X25 5933 10.9 ZN CASQUILLO SOPORTE CUBRESEMILLA TORNILLO DE MARIPOSA M14X165

NUT M10X 1,5 U5588

ECROU M10X 1,5 U5588 6.8 ZN

MUTTER M10X 1,5 U5588 6.8 ZN

TUERCA M10X 1,5 U5588 6.8 ZN

BOLT 10X25 5739 8.G GALVANIZED

VIS 10X25 5739 8.G ZN

SCHRAUBE 10X25 5739 8.G ZN

TORNILLO 10X25 5739 8.G ZN

NUT 6 UNI 5588 6.8 GALVANIZED

ECROU 6 UNI 5588 6.8 ZN

MUTTER 6 UNI 5588 6.8 ZN

TUERCA 6 UNI 5588 6.8 ZN

STRIKER

BRIDE 150 MM

ANSCHLAG

SCREW M6X1X16 U5739 8.8 ZN BUSHING 8,25 X 18 X 17

VIS M6X1X16 U5739 8.8 ZN BOITE 8,25 X18 X17

SCHRAUBE M6X1X16 U5739 8.8 ZN BsCHSE 8,25 X18 X17

ELEMENTO DE EMPALME RODILLO TENSIONA CADENA RESORTE TRAZ.ZN RASTRILLO TORNILLO M6X1X16 U5739 8.8 ZN CASQUILLO 8,25 X18 X17

SELF LOCK.NUT M8X1,25 D982 8ZN STOP RING 28 UNI 7435-75 8-LOBE HANDWHEEL M12X25 ARTICULATED ELEMENT ADJUSTMENT BOLT WAS.M14 15X 28X2,5 U6592 ZB PIN EL. .6 X24 DIN 1481 ADJUSTMENT HANDLE B4

ECROU AUTOBL.M8X1,25 D982 8 ZN BAGUE DE SERRAGE 28 UNI 7435-7 VOLANT 8 LOBES M12X25 ELEMENT ARTICULE VIS DE REGLAGE RON.M14 15X 28X2,5 U6592 ZB FICHE EL. 6 X24 DIN 1481 POIGNEE REGLAGE B4

SELBST.MUTT.M8X1,25 D982 8 ZN DRAHTSPRENGRING 28 UNI 7435-75 HANDRAD 8 BUCKEL M12X25 GELENKELEMENT EINSTELLSCHRAUBE SCH.M14 15X 28X2,5 U6592 ZB SPANNSTIFT 6 X24 DIN 1481 EINSTELLGRIFF B4

TUERCA AUTO. M8X1,25 D982 8 ZN ANILLO PARADA 28 UNI 7435-75 VOLANTE 8 LOBI M12X25 ELEMENTO ARTICULADO TORNILLO DE REGULACIN S ARA.M14 15X 28X2,5 U6592 ZB CLAVIJA EL.6 X24 DIN 1481 MANIJA REGULACIN B4 M

BUSHING 18X7X12-25

BOITE 18X7X12-25

BsCHSE 18X7X12-25

CASQUILLO 18X7X12-25

cod. G19530932

6.8 ZN

TAV. 101

21 49

60 61 45 63 62

17 15

14 5

51 56

59 50

55 56

52 48

18 23

69 68

19 39

54 26 25

10 55

46 22

57 76

56 OPTIONAL

9 34 44

31 41 75

26 37 32 36

cod. G19530932

TELAIO ELEMENTO Pos.

Cod.

56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76

G20970035 F01020174 G15881320 F01020528 G22250190 G15725030 G22250441 F04010135 F02050101 G15828660 G15829290 G15220120 G15828760 G22505063 G22505061 F01030060 G15829851 G15829861 F01060040 G15882440 G15882450

TAV. 101

Descrizione

Description

Benennung

Descripcion

RONDELLA 32X4X13 VITE M12X1,75X120 5737 8.8 ZN BRACCIO TENDICATENA VITE M12X1,75X40 U5739 10.9 ZD CORONA ASSE SEMINAT.Z-15 SV SUPPORTO CUSCINETTO MOZZO CORONA SEMINATORE SV/2 CUSC.D25 D47 B12 6005 2RS EX> ANELLO E. DE 25X 1,2 U7435 C70 ASS.MOLLA ALLEGGERIMENTO INDICE MOLLA PARALLELOGR. ZN VITE REGOLAZIONE ZN BOCCOLA TENDITORE 14,00X25X 45 VITE REGOL.RUOTE POSTERIORI BOCCOLA VITE DI REGOLAZIONE VITE M 8X1,25X35 U5933 10.9 ZD COPRISEME REGOLABILE SX COPRISEME REGOLABILE DX VITE M8X1,25X20 U5732 4.6 ZG SUPP.DX COPRISEME REGOLABILE SUPP.SX COPRISEME REGOLABILE

WASHER 32X4X13

RONDELLE 32X4X13

UNTERLEGSCHEIBE 32X4X13

ARANDELA 32X4X13

SCREW M12X1,75X40 U5739 10.9ZN PLANTING UNIT AXLE Z-15 RING G BEARING SUPPORT PLANTING UNIT CROWN HUB SV/2 BEARING D25 D47 B12 6005 2RS SEEGER RING E. 25X1,2 7435 C70 LIGHTENING SPRING COUPLING

VIS M12X1,75X40 U5739 10.9 ZN COURONNE AXE SEMEUR Z-15 SV SUPPORT PALIER MOYEU COURONNE SEMEUR SV/2 0 SEEGER E. 25X 1,2 U7435 C70 ASS. RESSORT ALLEGEMENT

SCHR.M12X1,75X40 U5739 10.9 ZN KRANZ SZELEMENTACHSE Z-15 SV LAGERHALTERUNG KRANZNABE SZELEMENT SV/2

TORN.M12X1,75X40 U5739 10.9 ZN CORONA EJE SEMBR. Z-15 SV SOPORTE COJINETE CUBO CORONA SEMBRADOR SV/2

SEEGERING E. 25X 1,2 U7435 C70 ERLEICHTERUNGSFEDERKOMPLEX

ANILLO E. 25X 1,2 U7435 C70 CONJ. MUELLE DE ALIGERAMIENTO

REGULATION BOLT BUSHING- TIGHTENER BOLT- REAR WHEEL ADJUSTM. BUSHING SCREW M8X1,25X35 U5933 8.8 ZD

VIS RÉGLAGE ZN BOITE TENDEUR VIS REGLAGE ROUES ARRIERES BOITE VIS DE REGLAGE VIS 8X35 5933 8.8 ZN

STELLSCHRAUBE ZN BsCHSE SPANNER EINSTELLSCHRAUBE HINTERRZDER BsCHSE EINSTELLSCHRAUBE SCHRAUBE 8X35 5933 8.8 ZN

TORNILLO REGULACIÓN ZN CASQUILLO TENSOR TORNILLO REGUL. RUEDAS TRASERA CASQUILLO TORNILLO DE REGULACI TORNILLO 8X35 5933 8.8 ZN

SCREW M8X1,25X20 U5732 4.6 ZN

VIS M8X1,25X20 U5732 4.6 ZN

SCHRA. M8X1,25X20 U5732 4.6 ZN

TORN. M8X1,25X20 U5732 4.6 ZN

cod. G19530932

TAV. 112

4 7 1

11 2

15 16

4 18 26 8

9 10

8 - 15

0 192

366

15 - 25

192

036

6 13

cod. G19530932

FALCIONI ASSOLCATORI Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

F01020468 F01040098 G15828350 F01200244 G15828400 G15828410 G15881601 G15881620 G15881610 G15881630 F01030054 G15881691 G15881591 G15881472 G15881450 G15881481 G15881740 G15881492 G15882020 G15881440 G19203660 G19203670 F01200270 G15827310 G19203640 F01020450 G15827340

TAV. 112

Descrizione

Description

Benennung

Descripcion

VITE M10X1,5 X16 U5739 8.8 ZN VITE M 8X1,25X30 U5931 8.8 BR ASS.LAMIERE FALCIONE FS-03 DADO M 8X1,25 U5588 6.8 ZN FALCIONE FILA SINGOLA H14 FALCIONE FS-03 H14/25 SUPPORTO FALCIONE DR7 '11 ASS.RIGA DX.FALCIONE DR '06 ASS.RIGA SX.FALCIONE DR '06 ASS.SLITTA FALCIONE DR7 '06 VITE M 8X1,25X16 U5933 10.9 ZD FALCIONE DR7 H08/15 '11 COMPL FALCIONE DR7 H15/25 '11 COMPL ASS.RIGA DX FALCIONE TR ASS.TOP FALCIONE TR ASS.RIGA CENTRALE FALCIONE TR ASS.SLITTA TR ASS.RIGA SX FALCIONE TR MONT.FALCIONE TR-10 H 8-15 MONT.FALCIONE TR-10 H15-25 TAGLIENTE FALCIONE FS03 H8/15 TAGLIENTE FALCIONE FS03 H15/25 DADO M10X 1,5 U5588 6.8 ZN ASS.FALCIONE FASCIA 6 PUNTALE FALCIONE A FASCIA "R" VITE M 8X1,25X40 U5739 8.8 ZN FALCIONE A FASCIA 6 CON VITE

SCREW M10X1,5X16 U5739 8.8 ZN SCREW 8 X30 5931 8.G COULTER SHEET ASS. FS-03 NUT M8 X1,25 U5588 6.8 ZN H14 SINGLE ROW COULTER FS-03 H14/25 COULTER

VIS M10X1,5X16 U5739 8.8 ZN VIS 8 X30 5931 8.G GR. T+LES SOC FS-03 ECROU M8 X1,25 U5588 6.8 ZN HACHOIR RANG SIMPLE H14 HACHOIR TRANSMISSION-03 H14/25

SCHRA. M10X1,5X16 U5739 8.8 ZN SCHRAUBE 8 X30 5931 8.G BLECHE S-SCHAR FS-03 MUTTER M8 X1,25 U5588 6.8 ZN EINZELREIHENS-SCHAR H 14 S-SCHAR FS-03 H14/25

TORN. M10X1,5X16 U5739 8.8 ZN TORNILLO 8 X30 5931 8.G CONJ. CHAPAS BOTA FS-03 TUERCA M8 X1,25 U5588 6.8 ZN ARADO FILA SENCILLA H14 ARADO FS-03 H14/25

RIGHT CUTTER LINE ASS. DR LEFT CUTTER LINE ASS. DR

GR. REGLE DROITE DE HACHOIR D GR. REGLE GAUCHE DE HACHOIR D

STAB RE SZSCHAR DR STAB LI SZSCHAR DR

CONJ. VARILLA DER. GUADA¥ADORA CONJ. VARILLA IZQ. GUADA¥ADORA

BOLT 8X16 UNI5933 10.9 GALVANI

VIS 8X16 UNI 5933 10.9 ZN

SCHRAUBE 8X16 UNI 5933 10.9 ZN

TORNILLO 8X16 UNI 5933 10.9 ZN

RIGHT CUTTER LINE ASS. TR

GR. REGLE DROITE DE HACHOIR TR

STAB RE SZSCHAR TR

CONJ. VARILLA DER. GUADA¥ADORA

LEFT CUTTER LINE ASS. TR

GR. REGLE GAUCHE DE HACHOIR TR

STAB LI SZSCHAR TR

CONJ. VARILLA IZQ. GUADA¥ADORA

CUTTER EDGE FS03 H8/15

COUPEUR HACHOIR FS03 H8/15

SCHARSCHNEIDE FS03 H8/15

NUT M10X 1,5 U5588

ECROU M10X 1,5 U5588 6.8 ZN

MUTTER M10X 1,5 U5588 6.8 ZN

AFIL. HOJA DE CORTE FS03 H8/15 REJA TRIPLE FS03 H15/25 TUERCA M10X 1,5 U5588 6.8 ZN

VIS M 8X40

SCHRAUBE M 8X40

TORNILLO M 8X40

cod. G19530932

6.8 ZN

SCREW M8X 1,25X40 5739 8.8 ZN

TAV. 122 18

4 13 22

13 4 25 10

8 7 4

27 33

23 18

30 27

39 8 18 4

8 32

19 15

20 18

27 1

8 7 4

36 9

4 3

OPTIONAL

(**) 43 (*) 52

41 40 37 21

8 13 4

18 45

(**) 44 (*) 53 49

51 18

4 13

47 46

14 3

35 6

12 8 7 4

48 (**) 54 (*)

cod. G19530932

RUOTE DI COMPRESSIONE Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54

G15826830 G15826820 G15826561 F01020472 G15829430 G15829330 G19005320 F04010131 G19005080 G15829580 G15829410 F01030038 G19005081 G15881340 G15829920 G15829950 G15829890 F01200270 G10525830 G15882040 G19005160 G15821861 G15829690 G15829160 F01420060 G15827960 G15827980 G15829760 G15829770 G19005600 G15881380 G19005600 G15827870 G15881810 G19005960 G15827970 F01020512 G15224630 F01200293 G15421231 F01220048 F01020404 G15882181 G15882191 G15882160 G20980037 F01020470 G15882171 F01220011 G18904170 G15882150 G15882730 G15882740 G15882750

Descrizione MONT.RUOTA IN GOMMA D.250X100 RUOTA IN GOMMA 250X100 ASSE RUOTA 250X100 VITE M10X1,5X25 U5739 8.8 ZN MONT.RUOTA INOX D.250X100 FL. ASS.ANELLO INOX D.250X100 FIANCO RUOTA D.250 CUSC.D20 D42 B12 6004-2RSH EX> DISTANZIALE RUOTE INOX R MONT.RUOTA GOMMA D.250X100 FL. TUBO GOMMATO D.250X100 VITE M6X1X20 U5933 10.9 ZD DISTANZIALE RUOTE INOX R ASS.RUOTA IN GRIGLIA 250X100 ASS.SUPPORTO BILANCIERE RASCHIATERRA ASSE POSTERIORE BILANCIERE DADO M10X 1,5 U5588 6.8 ZN SPIANATERRA ASS.SUPPORTO SPARTIZOLLE BOCCOLA FINECORSA BILANCIERE SPIANATERRA SUPPORTO SPARTIZOLLE RUOTA 250X170 COMPL. ROS.M10 10,5X 30X2,5 U6593 ZN RUOTA GOMMA 250X170 MOZZO 180 ASSE RUOTA 250X170 MONT.RUOTA INOX D.250X170 FL. ASS.ANELLO INOX D.250X170 DISTANZIALE D.20 XD.27 X10.5 ASS.RUOTA IN GRIGLIA 250X170 DISTANZIALE D.20 XD.27 X10.5 SUPPORTO BILANCIERE ASSE POSTERIORE BILANCIERE 187 DIST.D.15 X30 X53 RASCHIATERRA VITE M12X1,75X35 U5739 8.8 ZN BOCCOLA BRACCIO DADO M12X1,75 U5588 6.8 ZN BOCCOLA BRACCIO SUPERIORE DADO M12X1,75 D980 8 ZN VITE M6X1X20 U5739 8.8 ZN PIASTRA 175X45 RASCHIATORE IN GOMMA SUPPORTO DX BOCCOLA 15X10,25X8 VITE M10X1,5X20 U5739 8.8 ZN SUPPORTO RASCHIATERRA GOMMA DADO M 6X 1 D980 8 ZN MOLLA SPORTELLO GRANDE SUPPORTO SX PIASTRA RASCHIATORE IN GOMMA SUPP.RASCHIATERRA IN GOMMA

cod. G19530932

TAV. 122 Description

Description

Benennung

Descripcion

RUBBER WHEEL 250X100 AXLE BOLT 10X25 5739 8.G GALVANIZED

ROUE EN CAOUTCHOUC 250X100 AXE VIS 10X25 5739 8.G ZN

GUMMIRAD 250X100 ACHSE SCHRAUBE 10X25 5739 8.G ZN

RUEDA DE CAUCHO 250X100 EJE TORNILLO 10X25 5739 8.G ZN

RING D.250X100

BAGUE D.250X100

RING D.250X100

ANILLO D.250X100

BEARING D20 D42 B12 6004-2RSH INOX R WHEEL SPACER

ROULEMENT 6004 ENTRETOISE ROUE INOX R

LAGER 6004 DISTANZSTsCK RAD INOX R

COJINETE 6004 DISTANCIADOR RUEDA INOX R

SCREW M6X 1X20 U5933 10.9 ZD

VIS M 6X20

SCHRAUBE M 6X20

TORNILLO M 6X20

NUT M10X 1,5 U5588 SOIL LEVELLER

ECROU M10X 1,5 U5588 6.8 ZN NIVELEUSE

MUTTER M10X 1,5 U5588 6.8 ZN ERDEBNER

TUERCA M10X 1,5 U5588 6.8 ZN NIVELADORA

LIMIT SWITCH ROCKER BUSHING

DOUILLE BUTEE

ENDANSCHLAGSBUCHSE TANDEMWAGEN CASQUILLO FIN DE CARRERA BALAN

WASHER 10,5X30

RONDELLE 10,5X30

SCHEIBE 10,5X30

ARANDELA 10,5X30

WHEEL AXLE 250X170

AXE ROUE 250X170

RADACHSE 250X170

EJE RUEDA 250X170

RING D.250X170

BAGUE D.250X170

RING D.250X170

ANILLO D.250X170

SCREW M12X1,75X35 5739 8.8 ZN ARM BUSHING NUT M12X1,75 U5588 6.8 ZN UPPER ARM BUSHING NUT M12X1,75 D980 8 ZN SCREW M 6X 1X20 U5739 8.8 ZN

VIS M12X1,75X35 5739 8.8 ZN BOITE BRAS ECROU M12X1,75 U5588 6.8 ZN BOITE BRAS SUPERIEURE ECROU M12X1,75 D980 8 ZN VIS 6X20 5739 8.G ZN

SCHR. M12X1,75X35 5739 8.8 ZN BsCHSE ARM MUTTER M12X1,75 U5588 6.8 ZN OBERE ARMBsCHSE SCHEIBE M12X1,75 D980 8 ZN SCHRAUBE 6X20 5739 8.G ZN

TORN. M12X1,75X35 5739 8.8 ZN CASQUILLO BRAZO TUERCA M12X1,75 U5588 6.8 ZN CASQUILLO BRAZO SUPERIOR TUERCA M12X1,75 D980 8 ZN TORNILLO 6X20 5739 8.G ZN

BUSHING 15X10,25X8 BOLT M 10X20

BOITE 15X10,25X8 VIS M 10X20

BsCHSE 15X10,25X8 SCHRAUBE M 10X20

CASQUILLO 15X10,25X8 TORNILLO M 10X20

NUT M6X1 D980 8 ZN LARGE HATCH SPRING

ECROU M6X1 D980 8 ZN RESSORT PORTILLON GRAND

MUTTER M6X1 D980 8 ZN GROSSE KLAPPE FEDER

TUERCA M6X1 D980 8 ZN MUELLE DE PORTILLO GRANDE

6.8 ZN

BALANCIE

TAV. 132 FILA SINGOLA - SINGLE ROW

ORIETTA «N» (*) ORIETTA «W» (**)

ORIETTA «N» (*) ORIETTA «W» (**) 7

ORIETTA «N» (*)

(**)51

29 19 9

10(*) 14

14 13 10(*)

11(*)

11(*) 12

9 11(*)

9 1

ORIETTA «W» (**)

39(**)

17 18

(**)51

FILA DOPPIA E TRIPLA - DOUBLE AND TRIPLE ROW

(*)10

FILA DOPPIA - DOUBLE ROW

SEMINA A FASCIA - BROAD SEEDING

36 9

26 9

39(**)

1 5

34 10(*)

6 26

4 60

4 37

20 2

25 -D.168x65 (INOX)

58 53 47

46 22 -D.168x23 (INOX)

59 55 56 54

52 50 48

42 45 47 41 21 -D.178x24 42

49 48

cod. G19530932

RUOTINI DI COMPRESSIONE Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

F01030211 G19005290 F06120066 F01240012 G15828440 F01060069 G15827491 G15828740 F02050034 G19005970 G15827480 G15825251 F01410037 F20110500 F02200363 G19004530 G66248100 G19004560 G18903670 G19005160 G15829590 GA5820270 F01020398 G15826010 G15829451 F01200232 G22250178 G15828830 G15828151 G19005300 G15825430 G15825440 G10122392 G15881931 G15881921 F01410100 G15881800 G15881780 G15881840 G15881750 F04010125 G19005331 G15882720 F01030038 G15829420 GA5820280 F01030041 G15827610 F01020472 F01200270 G15882300 G15882480 G15882470 G15882490 G18801680 F01020043 F01230022 F01020114 F01410064 G20970149

TAV. 132

Descrizione

Description

Benennung

Descripcion

VITE M8X1,25X25 U7380 10.9 ZD DISTANZIALE 15X24X6 RUOTINO FLEX 170 X 30 DADO M 6X 1 U5448 5.8 ZN RASCHIATERRA RUOTINI FS VITE M10X1,5X30 U5732 4.6 ZN STELO PRESSORE R ASS.ASSE RUOTINO ANELLO E. DE 15X 1 U7435 C70 DIST.D.15 X22 X 9 ASSE COPRISEME SUPP.RUOTINO PREMISEME FS ROS.M6 6,4X12,5X1,6 U6592 ZN INGRASS.A SFERE M6X1 LUNGO COPIGLIA R 3X 62 ZN VOLANTINO PRESSORE (SEM.ORT.R) RULLO TEND. SP BOCCOLA MOLLA PRESSORE MOLLA COMPRESSIONE RUOTINO BOCCOLA FINECORSA BILANCIERE MONT.RUOTA GOMMA D.162X24 FL. RUOTA INOX D.168X23 COMPL VITE M6X1X12 U5739 8.8 ZN BRACCIO PREMISEME FASCIA RUOTA INOX D.162X65 FL.COMPL DADO M 6X 1 U5588 6.8 ZN RASCHIATERRA RUOTINO LARGO SV ASS.ASSE RUOTINO A FASCIA STELO PRESSORE RUOT.FASCIA DISTANZIALE 15X22X4,5 BRACCIO SX.PREMISEME DR BRACCIO DX.PREMISEME DR RASCHIATERRA COPRISEME A FASCIA DX COPRISEME A FASCIA SX ROS.M16 17X 30X 3 U6592 ZN ASS.SUPPORTO RASCHIATERRA ASS.ASSE RUOTINO TR PERNO RUOTE PREMISEME TR ZN ASS.PRESSORE RUOTINI TR CUSC.D15 D32 B9 6002 2RS1 FIANCO RUOTA D.168 ANELLO INOX 168X65 VITE M6X1X20 U5933 10.9 ZD TUBO GOMMATO D.162X24 ANELLO INOX 168X23 VITE M6X1X10 U5933 10.9 ZD PROLUNGA BILANCIERE VITE M10X1,5X25 U5739 8.8 ZN DADO M10X 1,5 U5588 6.8 ZN DISTANZIALE 15-25X50 SUPP.BASCULANTE PIATTO DX SUPP.BASCULANTE PIATTO SX SUPP.BASCULANTE BOCCOLA 11 X25 X7,5 ZN VITE M6X1X60 U5737 8.8 ZN DADO M 6X 1 D982 8 ZN VITE M10X1,5X50 U5737 8.8 ZN ROS.M10 10,5X 20X 2 U6592 ZN RONDELLA D.15X28X1,5

BOLT 8X25 U7380 10.9 GALVANIZ

VIS 8X25 U7380 10.9 ZN

SCHRAUBE 8X25 U7380 10.9 ZN

TORNILLO 8X25 U7380 10.9 ZN

WHEEL FLEX 170X 30 NUT 6 UNI 5448 5.8 ZN WHEEL SOIL-SCRAPER FS BOLT 10X30 5732 4.6 PRESSURE STEM ASS. WHEEL AXIS ASS. ELASTIC RING DE 15X 1

ECROU 6 UNI 5448 5.8 ZN RACLEUR ROUE FS BOULON 10X30 5732 4.6 GR. TIGE GR. AXE ROUE BAGUE ELASTIQUE DE 15X 1

MUTTER 6 UNI 5448 5.8 ZN ERDSCHABER FS SCHRAUBE 10X30 5732 4.6 SCHAFT RADACHSE RING DE 15X 1

TUERCA 6 UNI 5448 5.8 ZN RASCADOR RUEDA FS PERNO 10X30 5732 4.6 CONJ. VµSTAGO CONJ. EJE RUEDA ANILLO DE 15X 1

SEED-COVER AXLE STRIP SEED PRESS WHEEL SUPPORT PLANE WASHER D.6 SPHERE NIPPLE M6X1 LONG SPRING SPLIT PIN 3X 62 ZN HANDWHEEL TIGHTENER ROLLER SP SPRING BUSHING COMPR. WHEEL SPRING LIMIT SWITCH ROCKER BUSHING

AXE COUVRE-GR. ASS. SUPPORT ROUET RECOUVREUR RONDELLE D.6 GRAISSEUR A BILLES M6X1 LONG GOUPILLE R 3X62 VOLANT ROULEAU TENDEUR SP RESSORT RESSORT COMPRESSION ROUET DOUILLE BUTEE BALANCIE

SAMENABDECK ASCHE CUBRESEMILLAS EJE SAMENANDRUCKROLLENHALTERUNGSKO CONJ.. SOPORTE RODILLO PRENSA SCHEIBE D.6 ARANDELA D.6 KUGELFETTBsCHSE M6X1 LANG ENGRASADOR ESFERAS M6X1 LARGO SPLINT R 3X62 CHAVETA R 3X62 HANDRAD VOLANTE SPANNERROLLE SP RODILLO TENSOR SP FEDER CASQUILLO MUELLE FEDER DsNGUNG ROLLE MUELLE COMPRESIN RUEDECILLA A ENDANSCHLAGSBUCHSE TANDEMWAGEN CASQUILLO FIN DE CARRERA BALAN

BOLT M 6X12 STRIP SEED PRESS ARM COUPLING

VIS M 6X12 ASS. BRAS ROUE INTERMEDIAIRE P

SCHRAUBE M 6X12 SAMENANDRUCKARMB_GELKOMPLEX

TORNILLO M 6X12 CONJ. PRENSA SEMILLAS FAJA

NUT 6 UNI 5588 6.8 GALVANIZED WIDE WHEEL SOIL-SCRAPER SV SEM."R" BANDS WHEEL AXIS ASS. STRIP WHEEL PRESSURE STEM ASS.

ECROU 6 UNI 5588 6.8 ZN RACLEUR ROUET LARGE SV GR. AXE ROUE BANDES SEM."R" GR. TIGE ROUE BRIDE

MUTTER 6 UNI 5588 6.8 ZN ERDSCHABER BREITE ROLLE SV RADACHSE BsNDE SEM."R" SCHAFT RAD BAND

TUERCA 6 UNI 5588 6.8 ZN RASCADOR RUEDECILLA LARGA SV CONJ. EJE RUEDA FAJA SEM."R" CONJ. VµSTAGO RUEDA BANDA

DR LEFT-SIDE SEED PRESS ARM CO DR RIGHT-SIDE SEED PRESS ARM C

ASS. BRAS GAUCHE ROUE INTERMED ASS. BRAS DROIT ROUE INTERMEDI

ARMKOMPLEX LINKS SAMENANDR_CKE ARMKOMPLEX RECHTS SAMENANDR_CK

CONJ.. BRAZO SX PRENSASEMILLAS CONJ. BRAZO DX PRENSASEMILLAS

WASHER M16 17X30X3 U6592 ZN

RONDELLE M16 17X30X3 U6592 ZN

SCHEIBE M16 17X30X3 U6592 ZN

ARANDELA M16 17X30X3 U6592 ZN

WHEEL AXIS TR

AXE ROUE TR

RADACHSE TR

EJE RUEDA TR

BEARING D15 D32 B9 6002 2RS1

PALIER 6002 2RS1

LAGER 6002 2RS1

COJINETE 6002 2RS1

SCREW M6X 1X20 U5933 10.9 ZD

VIS M 6X20

SCHRAUBE M 6X20

TORNILLO M 6X20

BOLT 6x10 5933 10.9 GALVANIZ.

VIS 6x10 5933 10.9 ZN

SCHRAUBE 6x10 5933 10.9 ZN

TORNILLO 6x10 5933 10.9 ZN

BOLT 10X25 5739 8.G GALVANIZED NUT M10X 1,5 U5588 6.8 ZN

VIS 10X25 5739 8.G ZN ECROU M10X 1,5 U5588 6.8 ZN

SCHRAUBE 10X25 5739 8.G ZN MUTTER M10X 1,5 U5588 6.8 ZN

TORNILLO 10X25 5739 8.G ZN TUERCA M10X 1,5 U5588 6.8 ZN

BUSHING 11X25X7,5 GALVA SCREW M6X 1X60 U5737 8.8 ZN NORM.SELF-LOCKING NUT 6 GALVAN SCREW M10X 1,5X50 U5737 8.8 ZN WASHER M10 10,5X20X2 U6592 ZN WASHER D.15X28X1-5

BOITE 11X25X7,5 ZN VIS 6 X60 5737 8.G ZN ECROU AUTOB.NOR.6 ZN VIS M10X 1,5X50 U5737 8.8 ZN RONDELL.M10 10,5X20X2 U6592 ZN RONDELLE D. 15X28X1-5

BsCHSE 11X25X7,5 ZN SCHRAUBE 6 X60 5737 8.G ZN SELBSTSP. MUTTER NOR.6 ZN SCHRA.M10X 1,5X50 U5737 8.8 ZN SCHEIBE M10 10,5X20X2 U6592 ZN UNTERLEGSCHEIBE D.15X28X1-5

CASQUILLO 11X25X7,5 ZN TORNILLO 6 X60 5737 8.G ZN TUERCA AUTOB. NOR. 6 ZN TORN. M10X 1,5X50 U5737 8.8 ZN ARAND. M10 10,5X20X2 U6592 ZN ARANDELA D.15X28X1-5

cod. G19530932

TAV. 231

38 45 43 79

78 82

43 66 47

M14x165 - 41 M14x215 - 42 7

15 76 64

86 11 10 35 9

84 53

49 88 46 60

73 17

26 45

31 14

18 24

74 59

83 51 49 40

65 25

93 94 98

102 100

75 59

81 76

97 80

80 61

95 76

90 62

60 51

75 37

20 58

67 75

34 30 86 64

79 69

48 43 57

76 39

82 1 3

79 7 27

2 87 5

63 59

75 101

VEDI TAV. 112 SEE TAV. 112

cod. G19530932

ELEMENTO OLIMPIA Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54

G22230062 G66349003 G22230063 G22250190 G22250405 G22250441 G22270235 G14820991 G15220120 G22505063 G22505061 G15224630 G15725030 F06080087 G15821861 G15827620 G15827660 F06220037 G15827680 G15827700 G15827800 F06080050 G15827831 G15827860 G15827870 F06220010 G15827900 G15827930 G15827940 F06080016 G15827990 G15828250 G15828350 G15828660 G15828760 G15829290 G15829630 G15829681 G15829690 G15835360 G16610010 G16610020 G20970035 G20980050 G20980082 G18801450 G65336100 G18902880 G18801450 G19003400 G19005110 G19005460 G19203660 G19203670

TAV. 231

Descrizione

Description

Benennung

Descripcion

VITE DI REGOLAZIONE BOCCOLA SINT. ELEMENTO ARTICOLATO CORONA ASSE SEMINAT.Z-15 SV PERNO BRACCIO INFERIORE SV/2 MOZZO CORONA SEMINATORE SV/2 MANIGLIA REGOLAZIONE B4 FERMO REGOLAZIONE VITE REGOLAZIONE ZN VITE REGOL.RUOTE POSTERIORI BOCCOLA VITE DI REGOLAZIONE BOCCOLA BRACCIO SUPPORTO CUSCINETTO CATENA 1/2 ISO 083 86 MAGLIE SPIANATERRA TELAIETTO CENTRALE PIGNONE Z-15 ZN VOLANTINO ZIGR.D.26-M8 FEM BRACCIO TENDICATENA ATTACCO DISTRIBUTORE ANT. CARTER POST.SEMINATORE CATENA 1/2 ISO 083 96 MAGLIE BRACCIO BILANCIERE ATTACCO DISTRIBUTORE POST. SUPPORTO BILANCIERE VOLANTINO 4 LOBI M12X25 BRACCIO SUP.PARALLELOGRAMMA CARTER ANT. BRACCETTO INF. CATENA 1/2 ISO 083 38 MAGLIE CARTER CENTRALE SEMINATORE ATTACCO TELAIO ASS.LAMIERE FALCIONE FS-03 ASS.MOLLA ALLEGGERIMENTO BOCCOLA TENDITORE 14,00X25X 45 INDICE MOLLA PARALLELOGR. ZN ASSE TRASMISSIONE ASTA AGGANCIO SUPPORTO SPARTIZOLLE BRACCIO TENDICATENA VITE A MARTELLO M14X165 VITE A MARTELLO M14X215 RONDELLA 32X4X13 BOCCOLA 15X7X8,5 ZN BOCCOLA 18X7X12,25 BOCCOLA 8,25 X18 X17 MOLLA SPEC.FERMO MANIGLIA SP MOLLA FERMO PARALLELO SP BOCCOLA 8,25 X18 X17 ASTA INDICAZIONE PROFONDITA' RULLO TENDICATENA BOCCOLA BILANCIERE TAGLIENTE FALCIONE FS03 H8/15 TAGLIENTE FALCIONE FS03 H15/25

ADJUSTMENT BOLT BUSHING- SINTERED ARTICULATED ELEMENT PLANTING UNIT AXLE Z-15 RING G PIN- LOWER ARM SV/2 PLANTING UNIT CROWN HUB SV/2 ADJUSTMENT HANDLE B4 ADJUSTMENT STOP REGULATION BOLT BOLT- REAR WHEEL ADJUSTM. BUSHING ARM BUSHING BEARING SUPPORT

VIS DE REGLAGE BOITE FRITTEE ELEMENT ARTICULE COURONNE AXE SEMEUR Z-15 SV PIVOT BRAS INF. SV/2 MOYEU COURONNE SEMEUR SV/2 POIGNEE REGLAGE B4 BUTEE REGLAGE VIS RÉGLAGE ZN VIS REGLAGE ROUES ARRIERES BOITE VIS DE REGLAGE BOITE BRAS SUPPORT PALIER

EINSTELLSCHRAUBE SYNTH. BUECHSE GELENKELEMENT KRANZ SZELEMENTACHSE Z-15 SV ZAPFEN UNTERER ARM SV/2 KRANZNABE SZELEMENT SV/2 EINSTELLGRIFF B4 EINSTELLUNGSSPERRE STELLSCHRAUBE ZN EINSTELLSCHRAUBE HINTERRZDER BsCHSE EINSTELLSCHRAUBE BsCHSE ARM LAGERHALTERUNG

TORNILLO DE REGULACIN S CASQUILLO SINT. ELEMENTO ARTICULADO CORONA EJE SEMBR. Z-15 SV PERNO BRAZO INFERIOR SV/2 CUBO CORONA SEMBRADOR SV/2 MANIJA REGULACIN B4 M BLOQUEO REGULACIËN TORNILLO REGULACIÓN ZN TORNILLO REGUL. RUEDAS TRASERA CASQUILLO TORNILLO DE REGULACI CASQUILLO BRAZO SOPORTE COJINETE

cod. G19530932

FOLLETO ZIGR.D.26-M8

CUT-DOWN CHAIN 1/2 ISO 083 96

TR. CH...1/2 ISO 083 96 MAILL

KETTENLZNGE 1/2 ISO 083 96 GL

TRECHO CADENA 1/2 ISO 083 96 E

8-LOBE HANDWHEEL M12X25

VOLANT 8 LOBES M12X25

HANDRAD 8 BUCKEL M12X25

VOLANTE 8 LOBI M12X25

FRAME COUPLING COULTER SHEET ASS. FS-03 LIGHTENING SPRING COUPLING BUSHING- TIGHTENER

FIXATION BATI GR. T+LES SOC FS-03 ASS. RESSORT ALLEGEMENT BOITE TENDEUR

KUPPLUNG RAHMEN BLECHE S-SCHAR FS-03 ERLEICHTERUNGSFEDERKOMPLEX BsCHSE SPANNER

CONEXIN BASTIDOR CONJ. CHAPAS BOTA FS-03 CONJ. MUELLE DE ALIGERAMIENTO CASQUILLO TENSOR

TRANSMISSION AXLE

AXE TRANSMISSION

ANTRIEBSACHSE

EJE TRANSMISIN

WINGED SCREW M14X165 WINGED SCREW M14X215 WASHER 32X4X13 BUSHING 15X7X8-5 ZN BUSHING 18X7X12-25 BUSHING 8,25 X 18 X 17 SPEC SPRING HANDLE STOP SP

VIS A TETE MARTEAU M14X165 VIS A TETE MARTEAU M14X215 RONDELLE 32X4X13 BOITE 15X7X8-5 ZN BOITE 18X7X12-25 BOITE 8,25 X18 X17 RESSORT SPEC. ARRET POIGNEE SP

ZWEIFLÜGEL- SCHRAUBEN M14X165 ZWEIFLÜGEL- SCHRAUBEN M14X215 UNTERLEGSCHEIBE 32X4X13 BsCHSE 15X7X8-5 ZN BsCHSE 18X7X12-25 BsCHSE 8,25 X18 X17 SPEZIALFEDER GRIFFSPERRE SP

TORNILLO DE MARIPOSA M14X165 TORNILLO DE MARIPOSA M14X215 ARANDELA 32X4X13 CASQUILLO 15X7X8-5 ZN CASQUILLO 18X7X12-25 CASQUILLO 8,25 X18 X17 MUELLE ESPEC. BLOQUEO MANIJA S

BUSHING 8,25 X 18 X 17 DEPTH INDICATING ROD

BOITE 8,25 X18 X17 TIGE INDICATION PROFONDEUR

BsCHSE 8,25 X18 X17 TIEFENANZEIGESTAB

ROCKER BUSHING CUTTER EDGE FS03 H8/15

BOITE BALANCIER COUPEUR HACHOIR FS03 H8/15

BsCHSE KIPPHEBEL SCHARSCHNEIDE FS03 H8/15

CASQUILLO 8,25 X18 X17 VARILLA INDICACIÓN PROFUNDIDAD RODILLO TENSIONA CADENA CASQUILLO BALANCN AFIL. HOJA DE CORTE FS03 H8/15 REJA TRIPLE FS03 H15/25

TAV. 231

38 45 43 79

78 82

43 66 47

M14x165 - 41 M14x215 - 42 7

15 76 64

86 11 10 35 9

84 53

49 88 46 60

73 17

26 45

31 14

18 24

74 59

83 51 49 40

65 25

93 94 98

102 100

75 59

81 76

97 80

80 61

95 76

90 62

60 51

75 37

20 58

67 75

34 30 86 64

79 69

48 43 57

76 39

82 1 3

79 7 27

2 87 5

63 59

75 101

VEDI TAV. 112 SEE TAV. 112

cod. G19530932

ELEMENTO OLIMPIA «N» Pos.

Cod.

55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103

G18801610 F01020170 F01020172 F01020432 F01020436 F01020440 F01020445 F01020468 F01020479 F01020472 F01020512 F01020152 F01030054 F01030056 F01030060 F01040098 F01060069 F01070050 F01070073 F01200243 F01200244 F01200270 F01200293 F01200306 F01220048 F01410051 F01410064 F01410088 F01420048 F02050101 F02050615 F02100109 F02200342 F02200363 F04010135 F01020403 G15829960 F01420060 G18800260 G15882220 F01200232 G18902520 F01230034 G15882240 F01060040 G15882250 G15829970 G15882230 G18801610

TAV. 231

Descrizione

Description

Benennung

Descripcion

BOCCOLA 10,25X16 X11 ZN VITE M12X1,75X100 5737 8.8 ZN VITE M12X1,75X110 5737 8.8 ZN VITE M 8X1,25X16 U5739 8.8 ZN VITE M 8X1,25X 20 U5739 8.8 ZN VITE M 8X1,25X25 U5739 8.8 ZN VITE M8X1,25X30 U5739 8.8 ZN VITE M10X1,5 X16 U5739 8.8 ZN VITE M10X1,5X35 U5739 8.8 ZN VITE M10X1,5X25 U5739 8.8 ZN VITE M12X1,75X35 U5739 8.8 ZN VITE M12X1,75X 40 5737 8.8 ZN VITE M 8X1,25X16 U5933 10.9 ZD VITE M 8X1,25X25 U5933 10.9 ZD VITE M 8X1,25X35 U5933 10.9 ZD VITE M 8X1,25X30 U5931 8.8 BR VITE M10X1,5X30 U5732 4.6 ZN VITE M3,5X1,27X16 U6954 4.8NI VITE M4,2X1,41X9,5 U6954 4.8NI DADO M 8X1,25 U5588 6.8 BR DADO M 8X1,25 U5588 6.8 ZN DADO M10X 1,5 U5588 6.8 ZN DADO M12X1,75 U5588 6.8 ZN DADO M14X 2 U5588 6.8 ZN DADO M12X1,75 D980 8 ZN ROS.M8 8,4X 17X1,6 U6592 ZN ROS.M10 10,5X 20X 2 U6592 ZN ROS.M14 15X 28X2,5 U6592 ZN ROS.M8 8,4X 24X 2 U6593 ZN ANELLO E. DE 25X 1,2 U7435 C70 ANELLO E. DE 28X 1,5 U7435 C70 SPINA E.P. 6X 24 U6873 C70 BR COPIGLIA R 2X 50 ZN COPIGLIA R 3X 62 ZN CUSC.D25 D47 B12 6005 2RS EX> VITE M6X1X16 U5739 8.8 ZN ATTACCO SX MOLLA COPRISEME ROS.M10 10,5X 30X2,5 U6593 ZN BOCCOLA 10,5X18X6 ZN SUPPORTO COPRISEME SX DADO M 6X 1 U5588 6.8 ZN MOLLA TRAZ.ZN RASCHIATERRA DADO M 8X1,25 D982 8 COPRISEME SX VITE M8X1,25X20 U5732 4.6 ZG COPRISEME DX ATTACCO DX MOLLA COPRISEME SUPPORTO COPRISEME DX BOCCOLA 10,25X16 X11 ZN

BUSHING 10.25 X 16 X 11- GALVA SCREW M12X1,75X100 5737 8.8 ZN SCREW M12X1,75X110 5737 8.8 ZN SCREW M8X 1.25X16 U5739 8.8 ZN SCREW M8X1,25X20 U5739 8.8 ZN BOLT M8X1,25X25 U5739 8.8 ZN BOLT M 8X30 SCREW M10X1,5X16 U5739 8.8 ZN SCREW M10X1,5X35 U5739 8.8 ZN BOLT 10X25 5739 8.G GALVANIZED SCREW M12X1,75X35 5739 8.8 ZN SCREW M12X1,75X40 U5737 8.8 ZN BOLT 8X16 UNI5933 10.9 GALVANI BOLT 8X25 5933 10.9 GALVANIZED SCREW M8X1,25X35 U5933 8.8 ZD SCREW 8 X30 5931 8.G BOLT 10X30 5732 4.6 BOLT 3,5X1,27X 16 6954 4.8NI BOLT 4-2X 9-5 DIN 7981 NUT 8 UNI 5588 6.8 NUT M8 X1,25 U5588 6.8 ZN NUT M10X 1,5 U5588 6.8 ZN NUT M12X1,75 U5588 6.8 ZN NUT M14X2 NUT M12X1,75 D980 8 ZN WASHER M8 8,4X17X1,6 U6592 ZN WASHER M10 10,5X20X2 U6592 ZN WAS.M14 15X 28X2,5 U6592 ZB WASHER M8 8,4X 24X 2 U6593 ZN SEEGER RING E. 25X1,2 7435 C70 STOP RING 28 UNI 7435-75 PIN EL. .6 X24 DIN 1481 SPRING SPLIT PIN 2X50 ZN SPRING SPLIT PIN 3X 62 ZN BEARING D25 D47 B12 6005 2RS SCREW M6X1X16 U5739 8.8 ZN

BOITE 10-25X16 X11 ZN VIS M12X1,75X100 5737 8.8 ZN VIS 12X110 5737 8.G ZN VIS M 8X16 VIS M8X1,25X20 U5739 8.8 ZN VIS M8X1,25X25 U5739 8.8 ZN VIS M 8X30 VIS M10X1,5X16 U5739 8.8 ZN VIS M10X1,5X35 U5739 8.8 ZN VIS 10X25 5739 8.G ZN VIS M12X1,75X35 5739 8.8 ZN VIS M12X1,75X 40 U5737 8.8 ZN VIS 8X16 UNI 5933 10.9 ZN VIS 8X25 5933 10.9 ZN VIS 8X35 5933 8.8 ZN VIS 8 X30 5931 8.G BOULON 10X30 5732 4.6 VIS 3,5X1,27X 16 6954 4.8NI VIS 4-2X 9-5 DIN 7981 ECROU 8 UNI 5588 6.8 ECROU M8 X1,25 U5588 6.8 ZN ECROU M10X 1,5 U5588 6.8 ZN ECROU M12X1,75 U5588 6.8 ZN ECROU M14X2 ECROU M12X1,75 D980 8 ZN RONDEL. M8 8,4X17X1,6 U6592 ZN RONDELL.M10 10,5X20X2 U6592 ZN RON.M14 15X 28X2,5 U6592 ZB RONDELLE M8 8,4X 24X2 U6593 ZN SEEGER E. 25X 1,2 U7435 C70 BAGUE DE SERRAGE 28 UNI 7435-7 FICHE EL. 6 X24 DIN 1481 GOUPILLE R 2X50 ZN GOUPILLE R 3X62

BsCHSE 10-25X16 X11 ZN SCHRA.M12X1,75X100 5737 8.8 ZN SCHRAUBE 12X110 5737 8.G ZN SCHRAUBE M 8X16 SCHRA. M8X1,25X20 U5739 8.8 ZN SCHRA. M8X1,25X25 U5739 8.8 ZN SCHRAUBE M 8X30 SCHRA. M10X1,5X16 U5739 8.8 ZN SCHR. M10X1,5X35 U5739 8.8 ZN SCHRAUBE 10X25 5739 8.G ZN SCHR. M12X1,75X35 5739 8.8 ZN SCHR.M12X1,75X 40 U5737 8.8 ZN SCHRAUBE 8X16 UNI 5933 10.9 ZN SCHRAUBE 8X25 5933 10.9 ZN SCHRAUBE 8X35 5933 8.8 ZN SCHRAUBE 8 X30 5931 8.G SCHRAUBE 10X30 5732 4.6 SCHRAUBE 3.5X1.27X 16 6954 4.8 SCHRAUBE 4-2X 9,5 DIN 7981 MUTTER 8 UNI 5588 6.8 MUTTER M8 X1,25 U5588 6.8 ZN MUTTER M10X 1,5 U5588 6.8 ZN MUTTER M12X1,75 U5588 6.8 ZN MUTTER M14X2 SCHEIBE M12X1,75 D980 8 ZN SCHEIBE M8 8,4X17X1,6 U6592 ZN SCHEIBE M10 10,5X20X2 U6592 ZN SCH.M14 15X 28X2,5 U6592 ZB SCHEIBE M8 8,4X 24X 2 U6593 ZN SEEGERING E. 25X 1,2 U7435 C70 DRAHTSPRENGRING 28 UNI 7435-75 SPANNSTIFT 6 X24 DIN 1481 SPLINT R 2X50 ZN SPLINT R 3X62

CASQUILLO 10-25X16 X11 ZN TORN. M12X1,75X100 5737 8.8 ZN TORNILLO 12X110 5737 8.G ZN TORNILLO M 8X16 TORN. M8X1,25X20 U5739 8.8 ZN TORNIL.M8X1,25X25 U5739 8.8 ZN TORNILLO M 8X30 TORN. M10X1,5X16 U5739 8.8 ZN TORN. M10X1,5X35 U5739 8.8 ZN TORNILLO 10X25 5739 8.G ZN TORN. M12X1,75X35 5739 8.8 ZN TORN.M12X1,75X 40 U5737 8.8 ZN TORNILLO 8X16 UNI 5933 10.9 ZN TORNILLO 8X25 5933 10.9 ZN TORNILLO 8X35 5933 8.8 ZN TORNILLO 8 X30 5931 8.G PERNO 10X30 5732 4.6 TORNILLO 3.5X1.27X 16 6954 4.8 TORNILLO 4-2X 9-5 DIN 7981 TUERCA 8 UNI 5588 6.8 TUERCA M8 X1,25 U5588 6.8 ZN TUERCA M10X 1,5 U5588 6.8 ZN TUERCA M12X1,75 U5588 6.8 ZN DADO M14X2 TUERCA M12X1,75 D980 8 ZN ARANDELA M8 8,4X17X1,6 U6592ZN ARAND. M10 10,5X20X2 U6592 ZN ARA.M14 15X 28X2,5 U6592 ZB ARANDELA M8 8,4X 24X2 U6593 ZN ANILLO E. 25X 1,2 U7435 C70 ANILLO PARADA 28 UNI 7435-75 CLAVIJA EL.6 X24 DIN 1481 CHAVETA R 2X50 ZN CHAVETA R 3X62

VIS M6X1X16 U5739 8.8 ZN

SCHRAUBE M6X1X16 U5739 8.8 ZN

TORNILLO M6X1X16 U5739 8.8 ZN

WASHER 10,5X30

RONDELLE 10,5X30

SCHEIBE 10,5X30

ARANDELA 10,5X30

NUT 6 UNI 5588 6.8 GALVANIZED

ECROU 6 UNI 5588 6.8 ZN

MUTTER 6 UNI 5588 6.8 ZN

SELF LOCK.NUT M8X1,25 D982 8ZN

ECROU AUTOBL.M8X1,25 D982 8 ZN

SELBST.MUTT.M8X1,25 D982 8 ZN

TUERCA 6 UNI 5588 6.8 ZN RESORTE TRAZ.ZN RASTRILLO TUERCA AUTO. M8X1,25 D982 8 ZN

SCREW M8X1,25X20 U5732 4.6 ZN

VIS M8X1,25X20 U5732 4.6 ZN

SCHRA. M8X1,25X20 U5732 4.6 ZN

TORN. M8X1,25X20 U5732 4.6 ZN

BUSHING 10.25 X 16 X 11- GALVA

BOITE 10-25X16 X11 ZN

BsCHSE 10-25X16 X11 ZN

CASQUILLO 10-25X16 X11 ZN

cod. G19530932

TAV. 330

38 12 44 19

12 7

12 17 18

2 26 3

12 30

12 4 9

32 14

10 35

10 32

36 25

20 15

11 31 2

28 44 21 31

16 45

45 1

L2 L1 - 8 - 11 75 00 mm mm

47 - L1 43 - L2

46 7

cod. G19530932

VARIANTI ELEMENTO OLIMPIA «W» Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47

F01020122 F01060069 F01410064 F01200270 F01020432 F01020440 F01020472 F01020485 G15827700 F01030056 G15881260 F01200244 F01200270 F01020445 F02050101 F01410064 F04010135 G22250441 F02100109 G15725030 F06080016 F06080197 GA5820400 F02050615 G22250190 F01030060 G15835360 G22250028 G18801450 G19005110 G22505085 G15821110 F01420048 G15881140 G15827811 G19003400 F01070050 F06220037 G15881250 G15827860 F06080023 G15829630 GA5820350 G66248218 G19005460 GA5820310 GA5820320

TAV. 330

Descrizione

Description

Benennung

Descripcion

VITE M10X1,5X70 U5737 8.8 ZN VITE M10X1,5X30 U5732 4.6 ZN ROS.M10 10,5X 20X 2 U6592 ZN DADO M10X 1,5 U5588 6.8 ZN VITE M 8X1,25X16 U5739 8.8 ZN VITE M 8X1,25X25 U5739 8.8 ZN VITE M10X1,5X25 U5739 8.8 ZN VITE M10X1,5 X 50 5739 8.8 ZN ATTACCO DISTRIBUTORE ANT. VITE M 8X1,25X25 U5933 10.9 ZD ALBERO DADO M 8X1,25 U5588 6.8 ZN DADO M10X 1,5 U5588 6.8 ZN VITE M8X1,25X30 U5739 8.8 ZN ANELLO E. DE 25X 1,2 U7435 C70 ROS.M10 10,5X 20X 2 U6592 ZN CUSC.D25 D47 B12 6005 2RS EX> MOZZO CORONA SEMINATORE SV/2 SPINA E.P. 6X 24 U6873 C70 BR SUPPORTO CUSCINETTO CATENA 1/2 ISO 083 38 MAGLIE CATENA 1/2 ISO 083 58 MAGLIE SUPPORTO CUSCINETTO OLIMPIA W ANELLO E. DE 28X 1,5 U7435 C70 CORONA ASSE SEMINAT.Z-15 SV VITE M 8X1,25X35 U5933 10.9 ZD BRACCIO TENDICATENA PIGNONE Z-15 SV BOCCOLA 8,25 X18 X17 RULLO TENDICATENA FERMO ASSE IN LAMIERA BOCCOLA SUPPORTO COPRISEME ROS.M8 8,4X 24X 2 U6593 ZN ASS.TUBO REGOLAZ.PROFONDITA COPRISEME ASTA INDICAZIONE PROFONDITA' VITE M3,5X1,27X16 U6954 4.8NI VOLANTINO ZIGR.D.26-M8 FEM CARTER ATTACCO DISTRIBUTORE POST. CATENA 1/2 ISO 083 54 MAGLIE ASSE TRASMISSIONE BILANCIERE SAGOMATO L1100 RONDELLA DISTAN.SPAND. BOCCOLA BILANCIERE SUPPORTO RUOTA COMPRESS.L170 BILANCIERE SAGOMATO L875

SCREW M10X1,5X 70 U5737 8.8 ZN BOLT 10X30 5732 4.6 WASHER M10 10,5X20X2 U6592 ZN NUT M10X 1,5 U5588 6.8 ZN SCREW M8X 1.25X16 U5739 8.8 ZN BOLT M8X1,25X25 U5739 8.8 ZN BOLT 10X25 5739 8.G GALVANIZED BOLT M 10X50

VIS 10X 1,5X 70 U5737 8.8 ZN BOULON 10X30 5732 4.6 RONDELL.M10 10,5X20X2 U6592 ZN ECROU M10X 1,5 U5588 6.8 ZN VIS M 8X16 VIS M8X1,25X25 U5739 8.8 ZN VIS 10X25 5739 8.G ZN VIS M 10X50

SCHR.10X 1,5X 70 U5737 8.8 ZN SCHRAUBE 10X30 5732 4.6 SCHEIBE M10 10,5X20X2 U6592 ZN MUTTER M10X 1,5 U5588 6.8 ZN SCHRAUBE M 8X16 SCHRA. M8X1,25X25 U5739 8.8 ZN SCHRAUBE 10X25 5739 8.G ZN SCHRAUBE M 10X50

TORN.10X 1,5X 70 U5737 8.8 ZN PERNO 10X30 5732 4.6 ARAND. M10 10,5X20X2 U6592 ZN TUERCA M10X 1,5 U5588 6.8 ZN TORNILLO M 8X16 TORNIL.M8X1,25X25 U5739 8.8 ZN TORNILLO 10X25 5739 8.G ZN TORNILLO M 10X50

BOLT 8X25 5933 10.9 GALVANIZED SHAFT NUT M8 X1,25 U5588 6.8 ZN NUT M10X 1,5 U5588 6.8 ZN BOLT M 8X30 SEEGER RING E. 25X1,2 7435 C70 WASHER M10 10,5X20X2 U6592 ZN BEARING D25 D47 B12 6005 2RS PLANTING UNIT CROWN HUB SV/2 PIN EL. .6 X24 DIN 1481 BEARING SUPPORT

VIS 8X25 5933 10.9 ZN ARBRE ECROU M8 X1,25 U5588 6.8 ZN ECROU M10X 1,5 U5588 6.8 ZN VIS M 8X30 SEEGER E. 25X 1,2 U7435 C70 RONDELL.M10 10,5X20X2 U6592 ZN

SCHRAUBE 8X25 5933 10.9 ZN WELLE MUTTER M8 X1,25 U5588 6.8 ZN MUTTER M10X 1,5 U5588 6.8 ZN SCHRAUBE M 8X30 SEEGERING E. 25X 1,2 U7435 C70 SCHEIBE M10 10,5X20X2 U6592 ZN

TORNILLO 8X25 5933 10.9 ZN EJE TUERCA M8 X1,25 U5588 6.8 ZN TUERCA M10X 1,5 U5588 6.8 ZN TORNILLO M 8X30 ANILLO E. 25X 1,2 U7435 C70 ARAND. M10 10,5X20X2 U6592 ZN

MOYEU COURONNE SEMEUR SV/2 FICHE EL. 6 X24 DIN 1481 SUPPORT PALIER

KRANZNABE SZELEMENT SV/2 SPANNSTIFT 6 X24 DIN 1481 LAGERHALTERUNG

CUBO CORONA SEMBRADOR SV/2 CLAVIJA EL.6 X24 DIN 1481 SOPORTE COJINETE

CHAIN 1/2 ISO 083 58 LINKS

CHAINE 1/2 ISO 083 58 MAILLES

KETTE 1/2 ISO 083 58 GLIEDER

CADENA 1/2 ISO 083 58 ESLABNEL

STOP RING 28 UNI 7435-75 PLANTING UNIT AXLE Z-15 RING G SCREW M8X1,25X35 U5933 8.8 ZD

BAGUE DE SERRAGE 28 UNI 7435-7 COURONNE AXE SEMEUR Z-15 SV VIS 8X35 5933 8.8 ZN

DRAHTSPRENGRING 28 UNI 7435-75 KRANZ SZELEMENTACHSE Z-15 SV SCHRAUBE 8X35 5933 8.8 ZN

ANILLO PARADA 28 UNI 7435-75 CORONA EJE SEMBR. Z-15 SV TORNILLO 8X35 5933 8.8 ZN

Z-15 PINION SV BUSHING 8,25 X 18 X 17

PIGNON Z-15 SV BOITE 8,25 X18 X17

RITZEL Z-15 SV BsCHSE 8,25 X18 X17

PLATE AXLE STOP SEED COVER SUPP. BUSHING WASHER M8 8,4X 24X 2 U6593 ZN

ARRET AXE EN TOLE BOITE SUPPORT COUVRE-SEMENCE RONDELLE M8 8,4X 24X2 U6593 ZN

FESTSTELLVORRICHTUNG BLECHACHS BsCHSE SAMENABDECKERHALTER. SCHEIBE M8 8,4X 24X 2 U6593 ZN

PI¾N Z-15 SV P CASQUILLO 8,25 X18 X17 RODILLO TENSIONA CADENA BLOQUEO EJE DE CHAPA CASQUILLO SOPORTE CUBRESEMILLA ARANDELA M8 8,4X 24X2 U6593 ZN

DEPTH INDICATING ROD BOLT 3,5X1,27X 16 6954 4.8NI

TIGE INDICATION PROFONDEUR VIS 3,5X1,27X 16 6954 4.8NI

TIEFENANZEIGESTAB SCHRAUBE 3.5X1.27X 16 6954 4.8

VARILLA INDICACIÓN PROFUNDIDAD TORNILLO 3.5X1.27X 16 6954 4.8 FOLLETO ZIGR.D.26-M8

CUT-DOWN CHAIN .1/2 ISO 083 54 TRANSMISSION AXLE

TR. CH..1/2 ISO 083 54 MAILLE AXE TRANSMISSION

KETTENLZNGE 1/2 ISO 083 54 GL ANTRIEBSACHSE

TRECHO CADENA 1/2 ISO 083 54 E EJE TRANSMISIN

MAN. SPR. SPACER WASHER ROCKER BUSHING

RONDELLE ENTRETOISE EP. ENGRAI BOITE BALANCIER

ABSTANDSCHEIBE DsNGERSTREUER BsCHSE KIPPHEBEL

ARANDELA DISTAN.ABONAD. CASQUILLO BALANCN

cod. G19530932

TAV. 242

27 38

24 43

3 42 13

35 33

D.168x23 - 2 20 (INOX) 1 54 19 20

6 28

24 11

31 27

47 24

44 17

48 7 53 50 51 52

cod. G19530932

RUOTE E RUOTINI DI COMPRESSIONE Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55

GA5820280 GA5820270 G15882490 G15827610 G15827960 G15828440 G15829160 G15829760 G15829610 G15829620 G18802980 G18903670 G66248100 G19004530 G19004560 G19004961 G19005081 G19005300 F04010125 G19005331 F01020114 F01020472 F01060016 F01200270 F01240012 F01410064 F01420060 F02200194 F02200363 F06120066 G15827980 G15826561 G19005600 F04010131 G19005320 G15829770 G15829360 F01030038 G15882480 G15882470 G18801680 F01020043 F01230022 F01020404 G15882180 G15882190 G15882160 G20980037 F01020470 G15882171 F01220011 G18904170 G15882150 F01030041 F01410088

Descrizione ANELLO INOX 168X23 RUOTA INOX D.168X23 COMPL PIATTO SX SUPP.BASCULANTE PROLUNGA BILANCIERE RUOTA GOMMA 250X170 MOZZO 180 RASCHIATERRA RUOTINI FS RUOTA 250X170 COMPL. MONT.RUOTA INOX D.250X170 FL. BRACCIO PREMISEME PRESSORE BOCCOLA 15 X22 X7 MOLLA COMPRESSIONE RUOTINO RULLO TEND. SP VOLANTINO PRESSORE (SEM.ORT.R) BOCCOLA MOLLA PRESSORE DISTANZIALE 15X22X10 DISTANZIALE RUOTE INOX R DISTANZIALE 15X22X4,5 CUSC.D15 D32 B9 6002 2RS1 FIANCO RUOTA D.168 VITE M10X1,5X50 U5737 8.8 ZN VITE M10X1,5X25 U5739 8.8 ZN VITE M6X1X30 U5732 4.6 ZN DADO M10X 1,5 U5588 6.8 ZN DADO M 6X 1 U5448 5.8 ZN ROS.M10 10,5X 20X 2 U6592 ZN ROS.M10 10,5X 30X2,5 U6593 ZN COPIGLIA 4X 25 U1336 ZN COPIGLIA R 3X 62 ZN RUOTINO FLEX 170 X 30 ASSE RUOTA 250X170 ASSE RUOTA 250X100 DISTANZIALE D.20 XD.27 X10.5 CUSC.D20 D42 B12 6004-2RSH EX> FIANCO RUOTA D.250 ASS.ANELLO INOX D.250X170 DISTANZIALE D.39-45 L.90,5 ZN VITE M6X1X20 U5933 10.9 ZD SUPP.BASCULANTE PIATTO DX SUPP.BASCULANTE BOCCOLA 11 X25 X7,5 ZN VITE M6X1X60 U5737 8.8 ZN DADO M 6X 1 D982 8 ZN VITE M6X1X20 U5739 8.8 ZN PIASTRA RASCHIATORE IN GOMMA SUPPORTO DX BOCCOLA 15X10,25X8 VITE M10X1,5X20 U5739 8.8 ZN SUPPORTO RASCHIATERRA GOMMA DADO M 6X 1 D980 8 ZN MOLLA SPORTELLO GRANDE SUPPORTO SX VITE M6X1X10 U5933 10.9 ZD ROS.M14 15X 28X2,5 U6592 ZN

cod. G19530932

TAV. 242

Description

Benennung

Descripcion

WHEEL SOIL-SCRAPER FS

RACLEUR ROUE FS

ERDSCHABER FS

RASCADOR RUEDA FS

BUSHING 15 X22 X7 COMPR. WHEEL SPRING TIGHTENER ROLLER SP HANDWHEEL SPRING BUSHING

BOITE 15 X22 X7 RESSORT COMPRESSION ROUET ROULEAU TENDEUR SP VOLANT RESSORT

BsCHSE 15 X22 X7 FEDER DsNGUNG ROLLE SPANNERROLLE SP HANDRAD FEDER

CASQUILLO 15 X22 X7 MUELLE COMPRESIN RUEDECILLA A RODILLO TENSOR SP VOLANTE CASQUILLO MUELLE

BEARING D15 D32 B9 6002 2RS1

PALIER 6002 2RS1

LAGER 6002 2RS1

COJINETE 6002 2RS1

SCREW M10X 1,5X50 U5737 8.8 ZN BOLT 10X25 5739 8.G GALVANIZED BOLT 6X30 5732 4.6 GALVANIZED NUT M10X 1,5 U5588 6.8 ZN NUT 6 UNI 5448 5.8 ZN WASHER M10 10,5X20X2 U6592 ZN WASHER 10,5X30 SPLIT PIN 4 X25 1336 GALVAN. SPRING SPLIT PIN 3X 62 ZN WHEEL FLEX 170X 30 WHEEL AXLE 250X170 AXLE

VIS M10X 1,5X50 U5737 8.8 ZN VIS 10X25 5739 8.G ZN VIS 6X30 5732 4.6 ZN ECROU M10X 1,5 U5588 6.8 ZN ECROU 6 UNI 5448 5.8 ZN RONDELL.M10 10,5X20X2 U6592 ZN RONDELLE 10,5X30 GOUPILLE 4 X25 1336 ZN GOUPILLE R 3X62

SCHRA.M10X 1,5X50 U5737 8.8 ZN SCHRAUBE 10X25 5739 8.G ZN SCHRAUBE 6X30 5732 4.6 ZN MUTTER M10X 1,5 U5588 6.8 ZN MUTTER 6 UNI 5448 5.8 ZN SCHEIBE M10 10,5X20X2 U6592 ZN SCHEIBE 10,5X30 SPLINT 4 X25 1336 ZN SPLINT R 3X62

TORN. M10X 1,5X50 U5737 8.8 ZN TORNILLO 10X25 5739 8.G ZN TORNILLO 6X30 5732 4.6 ZN TUERCA M10X 1,5 U5588 6.8 ZN TUERCA 6 UNI 5448 5.8 ZN ARAND. M10 10,5X20X2 U6592 ZN ARANDELA 10,5X30 PASADOR 4 X25 1336 ZN CHAVETA R 3X62

AXE ROUE 250X170 AXE

RADACHSE 250X170 ACHSE

EJE RUEDA 250X170 EJE

BEARING D20 D42 B12 6004-2RSH

ROULEMENT 6004

LAGER 6004

COJINETE 6004

RING D.250X170

BAGUE D.250X170

RING D.250X170

ANILLO D.250X170

SCREW M6X 1X20 U5933 10.9 ZD

VIS M 6X20

SCHRAUBE M 6X20

TORNILLO M 6X20

BUSHING 11X25X7,5 GALVA SCREW M6X 1X60 U5737 8.8 ZN NORM.SELF-LOCKING NUT 6 GALVAN SCREW M 6X 1X20 U5739 8.8 ZN

BOITE 11X25X7,5 ZN VIS 6 X60 5737 8.G ZN ECROU AUTOB.NOR.6 ZN VIS 6X20 5739 8.G ZN

BsCHSE 11X25X7,5 ZN SCHRAUBE 6 X60 5737 8.G ZN SELBSTSP. MUTTER NOR.6 ZN SCHRAUBE 6X20 5739 8.G ZN

CASQUILLO 11X25X7,5 ZN TORNILLO 6 X60 5737 8.G ZN TUERCA AUTOB. NOR. 6 ZN TORNILLO 6X20 5739 8.G ZN

BUSHING 15X10,25X8 BOLT M 10X20

BOITE 15X10,25X8 VIS M 10X20

BsCHSE 15X10,25X8 SCHRAUBE M 10X20

CASQUILLO 15X10,25X8 TORNILLO M 10X20

NUT M6X1 D980 8 ZN LARGE HATCH SPRING

ECROU M6X1 D980 8 ZN RESSORT PORTILLON GRAND

MUTTER M6X1 D980 8 ZN GROSSE KLAPPE FEDER

TUERCA M6X1 D980 8 ZN MUELLE DE PORTILLO GRANDE

BOLT 6x10 5933 10.9 GALVANIZ. WAS.M14 15X 28X2,5 U6592 ZB

VIS 6x10 5933 10.9 ZN RON.M14 15X 28X2,5 U6592 ZB

SCHRAUBE 6x10 5933 10.9 ZN SCH.M14 15X 28X2,5 U6592 ZB

TORNILLO 6x10 5933 10.9 ZN ARA.M14 15X 28X2,5 U6592 ZB

TAV. 062

78 76 45

39 74 34

35 42

75 35

37 33

40 41

29 26 31

54 70

42 43

16 23

25 24

47 14 36

50 6

21 20

10 14

52 7

9 80 Vedi TAV. 321 See TAV. 321

56 60 61 62 63

59 1

57 58 64 65 64

66 67 68

cod. G19530932

DEPRESSORE Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55

F01020047 G15855361 F01430047 G19005240 G19004480 F01230143 G13912060 G13912050 G22230335 F01020403 G22230015 F03100277 F02050112 F02050403 F01220011 F04010215 F01020472 G15850200 G15450061 F01430023 F01200270 G22270369 G22230012 F01420084 F01200293 F06010160 F01430047 F01020403 G15450342 F03151288 G19002131 G15450390 F03151287 G15450270 F05150479 G22230014 G15850140 G15850280 F03100391 F20110770 G15450051 F03151149 F01200306 F01020086 F03100385 F03100500 G15855370 F05050020 G19005250 F03151197 G15855330 F01090204 F03151183 G22250274 F03151185

TAV. 062

Descrizione

Description

Benennung

Descripcion

VITE M6X1X70 U5737 8.8 ZN ASPIRASEME COMPL ROS.M6 6,4X 11X0,7 U8842J ZN TAPPO ASPIRAZIONE FORATO CONVOGLIATORE 12 USCITE DADO M24X 2 D982 8 ZN PIASTRINA DI TENUTA RONDELLA DI FERMO INVOLUCRI DEPRESSORE VITE M6X1X16 U5739 8.8 ZN GIRANTE TUBO PVC ANTIG.NEU.TRA.14X19 ANELLO E. DE 30X 1,5 U7435 C70 ANELLO E. DI 72X 2,5 U7437 C70 DADO M 6X 1 D980 8 ZN CUSC.D30 D72 B19 6306 2RSC3 EX VITE M10X1,5X25 U5739 8.8 ZN INCASTELLATURA DEPRESSORE SUPPORTO SX ROS.M10 10,5X 18X0,9 U8842J ZN DADO M10X 1,5 U5588 6.8 ZN P.DI P.CON CODOLO PULEGGIA MOTRICE ROS.M14 14,5X 36X 3 U6593 ZN DADO M12X1,75 U5588 6.8 ZN CINGHIA POLY V 1287 J-16 GOLE ROS.M6 6,4X 11X0,7 U8842J ZN VITE M6X1X16 U5739 8.8 ZN PROTEZ.CINGHIA DEPRES.COMPLETO VACUOM.0-100 MBAR C.SM.INC.D80 PROTEZIONE P.D.P. PULEGGIA CONDOTTA MANOM.0 A 25 MBAR C.SM.INC.D80 VITE 10X130 8.8 FIL.60 ZN ROND.APPOGGIO MANOMETRI SV DISTANZIALE CONVOGLIATORE SUPPORTO PULEGGIA CONDOTTA TUBO POLIURETANO 8-6 CAV.Q.M14X 2X 50 96X119 ZN SUPPORTO DX FILTRO LINEA 1'F 100 MESH DADO M14X 2 U5588 6.8 ZN VITE M 8X1,25X80 U5737 8.8 ZN TUBO FLEX EOLO DIAM.22 TUBO EOLO 35 PU FILTRO E MANOMETRI COMPL TAPPO SALVAFILETTO D.39 RIDUZIONE CONVOGLIATORE 45-35 RACC.SUPERAPIDO DRITTO 1/8G-8> PORTELLO REGOLAZ.ASPIRAZIONE VITE M6X1X70 U5449 5.8 ZN P/GOMMA 1'X22 M COD.2130 COLLEGAMENTO MANOMETRI SP-SV P/GOMMA PVC 1/2X20 >

SCREW M6X 1X70 U5737 8.8 ZN SEED SUCTION GROUP WASHER D6 DIN 6798 D.INT.GALV. FLANGE CONVEYOR 12 OUTLETS NUT M24X2 D982 8 ZN STOP PLATE STOP WASHER VACUUM PUMP CASINGS SCREW M6X1X16 U5739 8.8 ZN

VIS 6 X70 5737 8.G ZN GROUPE ASPIRATEUR DE GRAINES RONDELLE D6 DIN 6798 D. INT. Z BRIDE CONVOYEUR 12 SORTIES ECROU M24X2 D982 8 ZN PLAQUETTE DE TENUE RONDELLE DE BLOCAGE ENVELOPPES DEPRESSEUR H VIS M6X1X16 U5739 8.8 ZN

SCHRAUBE 6 X70 5737 8.G ZN GEBL-SEAGGREGAT UNT. SCHEIBE D6 DIN 6798 D. IN FLANSH TRICHTER MIT 12 AUSG-NGEN MUTTER M24X2 D982 8 ZN DICHTPLZTTCHEN FESTSTELLSCHEIBE sLLEN VAKUUMPUMPE C SCHRAUBE M6X1X16 U5739 8.8 ZN

TORNILLO 6 X70 5737 8.G ZN GRUPO ASPIRASEMILLAS ARANDELA D6 DIN 6798 D.INT.ZN BRIDA TRANSPORTADOR 12 SALIDAS TUERCA M24X2 D982 8 ZN PLACA DE RETENCIN P ARANDELLA DE BLOQUEO AJAS BOMBA VACO CA TORNILLO M6X1X16 U5739 8.8 ZN

PIPE- ANTIFREEZE NEU.TRA.14X19 SEEGER RING 30X 1,5 U7435 C70 SEEGER RING E.72X2,5 U7437 C70 NUT M6X1 D980 8 ZN BEARING D30 D72 B19 6306 2RSC3 BOLT 10X25 5739 8.G GALVANIZED DIFFUSION AIR PUMP FRAME

TUBE PVC TRA. 14X19 SEEGER E. 30 X 1,5 U7435 C70 SEEGER E. 72X 2,5 U7437 C70 ECROU M6X1 D980 8 ZN PALIER 6306 2RS C3 VIS 10X25 5739 8.G ZN B-TI POMPE A D+PRESSION

ROHR PVC FROSTSCHUTZNEU.TRA.14 SEEGERING E. 30X 1,5 U7435 C70 SEEGERING E. 72X 2,5 U7437 C70 MUTTER M6X1 D980 8 ZN LAGER 6306 2RS C3 SCHRAUBE 10X25 5739 8.G ZN GESTELL VAKUUMPUMPE

TUBO PVC ANTICONG.14X19 ANILLO E. 30 X 1,5 U7435 C70 ANILLO E. 72X 2,5 U7437 C70 TUERCA M6X1 D980 8 ZN COJINETE 6306 2RS C3 TORNILLO 10X25 5739 8.G ZN ARMAZËN BOMBA VAC-O

WASHER D10 DIN 6798 D.INT.ZN NUT M10X 1,5 U5588 6.8 ZN POWER TAKE-OFF- W/ SPIGOT DRIVING PULLEY GALVANIZED WASHER 14 X36 X3 NUT M12X1,75 U5588 6.8 ZN BELT POLY V 1287 J-16 CU GAT WASHER D6 DIN 6798 D.INT.GALV. SCREW M6X1X16 U5739 8.8 ZN BELT PROTECTION VACUUM METER 0-100 MBAR C.SMOR

RONDELLE D10 DIN 6798 D. INT. ECROU M10X 1,5 U5588 6.8 ZN PRISE DE FORCE AVEC CONE POULIE MOTRICE 540T RONDELLE 14 X36 X3 ZN ECROU M12X1,75 U5588 6.8 ZN COURROIE POLY V 1287 J-16 GOR RONDELLE D6 DIN 6798 D. INT. Z VIS M6X1X16 U5739 8.8 ZN

UNT. SCHEIBE D10 DIN 6798 D.IN MUTTER M10X 1,5 U5588 6.8 ZN KRAFTABTRIEB MIT ENDSTsCK ANTRIEBSSCHEIBE UNTERLEGSCHEIBE 14 X36 X3 ZN MUTTER M12X1,75 U5588 6.8 ZN UNT. SCHEIBE D6 DIN 6798 D. IN SCHRAUBE M6X1X16 U5739 8.8 ZN

ARANDELA D10 DIN 6798 D.INT.ZN TUERCA M10X 1,5 U5588 6.8 ZN TOMA DE FUERZA CON MANGO POLEA MOTRIZ ARANDELA 14 X36 X3 ZN TUERCA M12X1,75 U5588 6.8 ZN BANDA POLY V 1287 J-16 GOLE ARANDELA D6 DIN 6798 D.INT.ZN TORNILLO M6X1X16 U5739 8.8 ZN

VACUOMETRE 0-100 MBARS A/SUPPO

VAKUUMMETER 0-100 MBAR M. DZMP

VACUM. 0-100 MBAR C.ATEN.INC.V

DRIVEN PULLEY D.28 MANOM.0 TO 25 MBAR CUSHION D80 GALVANIZ. SCREW 10X130 8.8 FIL PRESSURE GAUGE REST WASHER SPACER SEED FUNNEL

POULIE ENTRAINEE D. 28

GETRIEBENE SCHEIBE D.28

POLEA CONDUCIDA D.28

VIS 10X130 8.8 FIL.60 ZN ROND. LOGEMENT MANOMETRES SV ENTRETOISE CONVOYEUR

SCHRAUBE 10X130 8.8 GEW.60 ZN STsTZSCHEIBE MANOMETER SV DISTANZSTsCK TRICHTER

TORNILLO 10X130 8.8 FIL.60 ZN ARAND. SOPORTE MANOMETROS SV DISTANCIADOR TRANSPORTADOR

POLIURETHAN PIPE 8-6 U BOLT M14X2X50 96X119 ZN

BRIDE U M14X2X50 96X119 ZN

ANSCHLANG U M14X2X50 96X119 ZN

EL.DE EMPALME M14X2X50 96X119

LINE FILTER 1'F 100 MESH NUT M14X2 BOLT M8X1X80

FILTRE LIGNE 1'F 100 MESH ECROU M14X2 VIS M8X1X80

LEITUNGSFILTER 1' F 100 MESH MUTTER M14X2 SCHRAUBE M8X1X80

FILTRO LINEA 1'F 100 MESH DADO M14X2 TORNILLO M8X1X80

TUBE EOLO 35 PU FILTER AND PRESSURE GAUGE UNIT CONVEYOR PLUG D.39

TUBE EOLO 35 PU GROUPE FILTRE ET MANOMETRES BOUCHON PROTEGE-FILET D. 39

FILTER- UND MANOMETERAGGREGAT GEWINDESCHUTZPFROPFEN D.39

GRUPO FILTRO Y MANËMETROS TAPN GUARDARROSCA D.39 D

ASPIRATION ADJUSTMENT FLAP GALVAN. SCREW 6X70 5449 5.8 HOSE 1''X22 M PRESSURE GAUGE CONNECT. SP-SV PVC 1/2X20 RUBBER/TIRE-CARRIER

PORTE REGLAGE ASPIRATION VIS 6X70 5449 5.8 ZN RACCORD PLASTIQUE 1"X22 M RACCORD MANOMETRES SP-SV PORTE-ROUE PVC 1/2X20

EINSTELLUNGSDECKEL GEBL-SE SCHRAUBE 6X70 5449 5.8. ZN P/GUMMI 1''X22 M VERBINDUNG MANOMETER SP-SV REIFENHALTERUNG PVC 1/2X20

REGISTRO REGULADOR DE ASPIRACI TORNILLO 6X70 5449 5.8 ZN P/CAUCHO 1''X22 M CONEXIN MANMETROS SP-SV LE CARGA GOMA PVC 1/2X20

cod. G19530932

TAV. 062

78 76 45

39 74 34

35 42

75 35

37 33

40 41

29 26 31

54 70

42 43

16 23

25 24

47 14 36

50 6

21 20

10 14

52 7

9 80 Vedi TAV. 321 See TAV. 321

56 60 61 62 63

59 1

57 58 64 65 64

66 67 68

cod. G19530932

DEPRESSORE Pos.

Cod.

56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80

F03151243 G15850300 G10551031 G15855350 F01020403 F03151183 F01070047 G18904440 G22250314 G22250315 F02050168 G22250316 F05150389 F03150821 G15855340 F01200244 G19005260 G19005270 F01020050 F01420036 F03151200 F06220018 G22250118 F03151356 F08011711

TAV. 062

Descrizione

Description

Benennung

Descripcion

RUBINETTO RIDUZIONE G1'-G1/2' COPERCHIO ASPIRASEMI SUPPORTO ASPIRASEME VITE M6X1X16 U5739 8.8 ZN P/GOMMA 1'X22 M COD.2130 VITE M3,5X1,34X9,5 U6954 4.8NI STAFFA FISSAGGIO BRACCI ZN GRIGLIA FILTRO ASPIRASEMI SV FILTRO ASPIRASEMI SV ANELLO E. DE 40X1,75 U7435 C70 DEFLETTORE ASPIRASEMI SV CONTENIT.SOTTOVUOT.LT.2 AR.122 ADATT. OCCHIO 1/4 L.38 SUPP.FILTRO E MANOMETRI DADO M 8X1,25 U5588 6.8 ZN RIDUZIONE CONVOGLIATORE 45-22 RIDUZIONE CONVOGLIATORE 22-19 VITE M6X1X80 U5737 8.8 ZN ROS.M6 6,4X 18X 2 U6593 ZN RACCORDO 90° C5 1/8' 6/8 VOLANTINO 3LOBI D.65-M8X15 PORTA CHIUSURA CAMERE SV VETRO VACUOM.0-100 MBAR D80 CARD.B1 Z6-Z6 L700

BREATHER TAP REDUCTION G1'-G1/2'

BOUCHON REFOUL. REDUCTION G1'-G1/2'

ENTLsFTUNGSPFROPFEN UNTERSETZUNG G1'-G1/2'

TAPON PURGADOR REDUCCIN G1'-G1/2'

SEED SUCTION SUPPORT SCREW M6X1X16 U5739 8.8 ZN HOSE 1''X22 M BOLT 3-5X 9-5 DIN 7981

SUPPORT ASPIRATEUR DE GRAINES VIS M6X1X16 U5739 8.8 ZN RACCORD PLASTIQUE 1"X22 M VIS 3-5X 9-5 DIN 7981

GEBL-SEHALTERUNG SCHRAUBE M6X1X16 U5739 8.8 ZN P/GUMMI 1''X22 M SCHRAUBE 3-5X 9-5 DIN 7981

SOPORTRE ASPIRA SEMILLAS TORNILLO M6X1X16 U5739 8.8 ZN P/CAUCHO 1''X22 M TORNILLO 3-5X 9-5 DIN 7981

SEED SUCTION FILTER GRID SV SEED SUCTION FILTER SV SEEGER RING 40X1,75 U7435 C70 SEED SUCTION DEFLECTOR SV VACUUM CONTAINER LT.2 AR.122 EYE UNION 1/4 L.38 FILTER AND PRESSURE GAUGE SUPP NUT M8 X1,25 U5588 6.8 ZN CONVEYOR REDUCTION 45-22 CONVEYOR REDUCTION 22-19 SCREW M6X 1X80 U5737 8.8 ZN FLAT WASHER 6-6X 18X2 6593 ZN UNION 90° C5 1/8'' 6/8 3-LOBE HANDWHEEL D.65-M8X15 CHAMBER CLOSURE INSPECTION DOO

GRILLE FILTRE ASPIRATEUR DE GR FILTRE ASPIRATEUR DE GRAINES S BAGUE SEEGER 40X1,75 U7435 C70 DEFLECTEUR ASPIR.DE GRAINES SV CONTENEUR SOUS VIDE LT. 2 AR. RACCORD OEIL 1/4 L.38 SUPPORT FILTRE ET MANOMETRES ECROU M8 X1,25 U5588 6.8 ZN REDUCTION DE CONVOYEUR 45-22 REDUCTION DE CONVOYEUR 22-19 VIS 6 X80 5737 8.G ZN ROND. PLATE 6-6X 18X2 6593 ZN RACCORD 90° C5 1/8'' 6/8 VOLANT 3 LOBES D.65-M8X15 PORTE FERMETURE CHAMBRES SV

GITTER SAMENABSAUGERFILTER SV SAMENABSAUGFILTER SV SEEGERRING 40X1,75 U7435 C70 ABLENKER SAMENABSAUGER SV LUFTDICHTER BEHZLTER .L2 AR. TSENVERBINDUNGSSTsCK 1/4 L.38 FILTER- UND MANOMETERHALTERUNG MUTTER M8 X1,25 U5588 6.8 ZN FTRDERERUNTERSETZUNG 45-22 FTRDERERUNTERSETZUNG 22-19 SCHRAUBE 6 X80 5737 8.G ZN SCHEIBE 6-6X 18X2 6593 ZN ANSCHLUSSTsCK 90° C5 1/8' 6/8 HANDRAD 3 BUCKEL D.65-M8X15 KAMMERN ABSCHLUSSTsR SV

REJILLA FILTRO ASPIRADOR DE SE FILTRO ASPIRADOR DE SEMILLAS S ANIL.SEEGER 40X1,75 U7435 C70 DEFLECTOR ASPIRADOR DE SEMILLA CONTENED. AL VACO LT. 2 AR.12C UNIN OJO 1/4 L.38 R SOPORTE FILTRO Y MANËMETROS TUERCA M8 X1,25 U5588 6.8 ZN REDUCCIN DE CONDUCTOR 45-22 REDUCCIN DE CONDUCTOR 22-19 TORNILLO 6 X80 5737 8.G ZN ARAND. PLANA 6-6X 18X2 6593 ZN UNION 90° C5 1/8'' 6/8 VOLANTE 3 LOBI D.65-M8X15 PUERTA DE CIERRE CAMARAS SV

cod. G19530932

TAV. 071

2 7

12 file/rows (L. 1600) - 17 14 file/rows (L. 2100) - 18 8 file/rows (L. 2100) - 19

16 7 13 2

5 10

11 12 4 7 21

6 9 20

14 - 12 file/rows (L. 1600) 15 - 14 file/rows (L. 2100) 16 - 8 file/rows (L. 2100)

cod. G19530932

IMPIANTO ASPIRAZIONE E SOFFIAGGIO Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

G66248098 F02300020 F05150473 F03151197 F03151225 F03100391 F03100500 F01020404 G22250091 F05150473 F01200232 F01410037 G15855170 G15855150 G15855240 G15855280 G15855140 G15855230 G15855270 G15850000 F20110706 F01200270

TAV. 071

Descrizione

Description

Benennung

Descripcion

TAPPO CONVOGLIATORE DEPR. SP FASCETTA STRING. 32/50 H.9 PUNTALE PVC D.20 RACC.SUPERAPIDO DRITTO 1/8G-8> RACCORDO Y 1/8G F-F-M > TUBO POLIURETANO 8-6 TUBO EOLO 35 PU VITE M6X1X20 U5739 8.8 ZN FORCELLA SUPP.TUBI SV PUNTALE PVC D.20 DADO M 6X 1 U5588 6.8 ZN ROS.M6 6,4X12,5X1,6 U6592 ZN SUPPORTO RAMPA SOFFIAGGIO RAMPA SOFFIAGGIO 1600X12 RAMPA SOFFIAGGIO 2100X14 RAMPA SOFFIAGGIO 2100X8 RAMPA ASPIRAZIONE 1600X12 RAMPA ASPIRAZIONE 2100X14 RAMPA ASPIRAZIONE 2100X8 SUPP.TUBI ASP. E SOFF. CAV.Q.M10X 1,5X 30 47X 60 ZN DADO M10X 1,5 U5588 6.8 ZN

AIR PUMP CONVEYOR PLUG SP STRING FASTEN.STRAPS 32/50 H.9 PVC TIP D.20

BOUCHON CONVOYEUR TURBINE SP COLLIER 32/50 H.9 EMBOUT PVC D. 20

VAKUUM FTRDERPFROPFEN SP SCHELLE 32/50 H.9 STTSSELSCHAFT PVC D.20

TAPN CONDUCTOR DEPR. SP ABRAZADERA 32/50 H.8 PUNTAL PVC D.20

UNION Y 1/8G F-F-M POLIURETHAN PIPE 8-6 TUBE EOLO 35 PU SCREW M 6X 1X20 U5739 8.8 ZN FORK PVC TIP D.20 NUT 6 UNI 5588 6.8 GALVANIZED PLANE WASHER D.6 BLOWER RAMP SUPPORT 1600X12 BLOW RAMP COUPLING 2100X14 BLOW RAMP COUPLING 2100X8 BLOW RAMP COUPLING 1600X12 BLOW RAMP COUPLING 2100X14 BLOW RAMP COUPLING 2100X8 BLOW RAMP COUPLING PIPE SUPPORT DISK SUPPORT.ELEMENT U BOLT SV NUT M10X 1,5 U5588 6.8 ZN

RACCORD Y 1/8G F-F-M

ANSCHLUSSTsCK Y 1/8G F-F-M

UNIN Y 1/8G F-F-M

TUBE EOLO 35 PU VIS 6X20 5739 8.G ZN FOURCHETTE SUPPORT TUBES SV EMBOUT PVC D. 20 ECROU 6 UNI 5588 6.8 ZN RONDELLE D.6 SUPPORT RAMPE SOUFFLAGE ASS. RAMPE SOUFFLAGE 1600X12 ASS. RAMPE SOUFFLAGE 2100X14 ASS. RAMPE SOUFFLAGE 2100X8 ASS. RAMPE ASPIRATION 1600X12 ASS. RAMPE ASPIRATION 2100X14 ASS. RAMPE ASPIRATION 2100X8 SUPPORT TUBES CAVALIER SUPPORT DISQUE SV ECROU M10X 1,5 U5588 6.8 ZN

SCHRAUBE 6X20 5739 8.G ZN GABEL ROHRHALTERUNG SV STTSSELSCHAFT PVC D.20 MUTTER 6 UNI 5588 6.8 ZN SCHEIBE D.6 GEBL-SERAMPENHALTERUNG GEBL-SERAMPENKOMPLEX 1600X12 GEBL-SERAMPENKOMPLEX 2100X14 GEBL-SERAMPENKOMPLEX 2100X8 GEBL-SERAMPENKOMPLEX 1600X12 GEBL-SERAMPENKOMPLEX 2100X14 GEBL-SERAMPENKOMPLEX 2100X8 ROHRHALTERUNG VERBINDUNG SCHEIBENHALTERUNG S MUTTER M10X 1,5 U5588 6.8 ZN

TORNILLO 6X20 5739 8.G ZN HORQUILLA SOPORTE TUBOS SV PUNTAL PVC D.20 TUERCA 6 UNI 5588 6.8 ZN ARANDELA D.6 SOPORTE RAMPA DE SOPLO CONJ. RAMPA DE SOPLO 1600X12 CONJ. RAMPA DE SOPLO 2100X14 CONJ. RAMPA DE SOPLO 2100X8 CONJ. RAMPA DE ASPIRACIËN 160 CONJ.. RAMPA DE ASPIRACIËN 210 CONJ.. RAMPA DE ASPIRACIËN 210 SOPORTE TUBOS PERNO EN U SOP. DISCO SV TUERCA M10X 1,5 U5588 6.8 ZN

cod. G19530932

TAV. 081 17 16x16x 85 - 68 16x16x150 - 69 16x16x200 - 70 16x16x220 - 71 16x16x248 - 72 16x16x275 - 73 16x16x320 - 74

6 5 - Metrical (cm) 51 - Imperial (inch)

Z21- 29 Z20- 16 Z19- 30 Z18- 15 Z17- 32 Z16- 14

4 7

34 37

9 67

10 49

39 2

35 -Z21 36 -Z15

1 65

64 85 62 61 58

57 56 63

60 55

83 43 48 47

13 46

12 76

cod. G19530932

RUOTA DI TRASMISSIONE Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54

F01200306 F01020221 F06220037 G22250035 G19704260 G15835170 F01040063 F01230022 G22250037 G10538350 G22230094 G10530101 F01200232 G10530690 G22250045 G22250047 G22250038 G65337005 F01020050 G10530361 G22250040 F02100062 G10530271 F01020172 G66248024 F06080017 F01430071 F01230058 G22250048 G22250046 G22250053 G22250044 F01020408 F01200244 G22250048 G22250050 F01020432 F01020526 G15220120 G13825210 G15830440 F01020403 G15830141 F06120113 G15835111 G22250028 G22250006 F02200452 F01020229 G15835241 G19708000 G65337035 F01030084 F01220033

TAV. 081

Descrizione

Description

Benennung

Descripcion

DADO M14X 2 U5588 6.8 ZN VITE M14X2X140 U5737 8.8 BR VOLANTINO ZIGR.D.26-M8 FEM PORTA DI CHIUSURA SV TABELLA DISTANZA DI SEMINA R COPERCHIO SCATOLA CAMBIO R.5" VITE M6X1X20 U5931 8.8 ZN DADO M 6X 1 D982 8 ZN ASSE INF.CAMBIO SV CUSCINETTO FORO QUADRO RIB. SUPPORTO CUSCINETTO ASS.RASCHIATERRA DADO M 6X 1 U5588 6.8 ZN PIGNONE Z16 1/2-3/16 Q.20,5 ZN CORONA CAMBIO Z-18 SV CORONA CAMBIO Z-20 SV MANIGLIA SV MOLLA TRAZ.CAMBIO SV VITE M6X1X80 U5737 8.8 ZN TUBO Q. 20X1,2X 107 SPINA TENDICATENA SV SPINA E.P. 4X 24 U6873 C70 BR TENDICATENA CAMBIO VITE M12X1,75X110 5737 8.8 ZN RULLO TEND. SP CATENA 1/2 ISO 083 42 MAGLIE ROS.M12 13X20,5X 1 U8842J ZN DADO M12X1,25 D982 8 ZN CORONA CAMBIO Z-21 SV CORONA CAMBIO Z-19 SV DISTAN.INFERIORE SV CORONA CAMBIO Z-17 SV VITE M6X1X30 U5739 8.8 ZN DADO M 8X1,25 U5588 6.8 ZN CORONA CAMBIO Z-21 SV CORONA CAMBIO Z-15 SV VITE M 8X1,25X16 U5739 8.8 ZN VITE M12X1,75X100 5739 8.8 ZN VITE REGOLAZIONE ZN MONT.MOLLA PRESS.USA > BOCCOLA MOLLA TRAZIONE ZN. VITE M6X1X16 U5739 8.8 ZN PARAFANGO RUOTA COMPL.5.00-15 6PR DX ASS.BRACCI RUOTA TRASMISSIONE PIGNONE Z-15 SV INGR.CON MOZZO 1/2 Z-10 SV SPINA SCATTO D.4,4 B/80 ZN VITE M14X2X180 U5737 8.8 BR CARTER RUOTA TRASMISSIONE R DECAL.CAMBIO R.5,00-15 R INCH MOLLA TENDICATENA RUOTA DP VITE M10X1,5X25 U5933 10.9 ZD DADO M10X 1,5 D980 8 ZN

NUT M14X2 BOLT M 14 X140 5737 8.G

ECROU M14X2 VIS M 14 X140 5737 8.G

MUTTER M14X2 SCHRAUBE M 14 X140 5737 8.G

CLOSURE DOOR SV R SEED PLANTING DISTANCE TABLE GEARBOX COVER R.5" BOLT M 6 NORM.SELF-LOCKING NUT 6 GALVAN LOWER GEARBOX SPINDLE SV SQUARE HOLE BEARING BEARING SUPPORT SOIL SCRAPER ASSEMBLY NUT 6 UNI 5588 6.8 GALVANIZED GEAR Z16 1/2-3/16 Q.20,5 ZN GEARBOX RING GEAR Z-18 SV GEARBOX RING GEAR Z-20 SV HANDLE SV TRACTION COUPLING SPRING- GEAR SCREW M6X 1X80 U5737 8.8 ZN SQUARE PIPE 20X1,2X 110 CHAIN TIGHTENER PIN SV PIN EL. 4 X24 DIN 1481

PORTE DE FERMETURE SV TABLEAU DISTANCE DE SEMIS R COUVERCLE BOITE DE VITESSE R.5 VIS M 6 ECROU AUTOB.NOR.6 ZN AXE INF. BOITE DE VITESSE PALIER TROU CARRE SUPPORT PALIER GR. RACLEUR ECROU 6 UNI 5588 6.8 ZN

ABSCHLUSSTsR SV TABELLE AUSSAATSABSTAND R DECKEL GETRIEBEGEHZUSE R.5" SCHRAUBE M 6 SELBSTSP. MUTTER NOR.6 ZN UNTERE GETRIEBEACHSE SV LAGER VIERKANTLOCH LAGERBsCHSE ERDSCHABER MUTTER 6 UNI 5588 6.8 ZN

DADO M14X2 TORNILLO M 14 X140 5737 8.G FOLLETO ZIGR.D.26-M8 PUERTA DE CIERRE SV TABLA DE DISTANCIA DE SIEMBRA TAPA CAJA DEL CAMBIO R.5" TORNILLO M 6 TUERCA AUTOB. NOR. 6 ZN EJE INF. CAMBIO SV COJINETE ORIFICIO CUADRADO SOPORTE COJINETE CONJ. RASC. TIERRA TUERCA 6 UNI 5588 6.8 ZN

COURONNE BOITE DE VITESSE COURONNE BOITE DE VITESSE POIGNEE SV RESSORT TRACT.BOITE DE VITESSE VIS 6 X80 5737 8.G ZN

GETRIEBEKRANZ Z-18 SV GETRIEBEKRANZ Z-20 SV GRIFF SV ZUGFEDER GETRIEBE SV SCHRAUBE 6 X80 5737 8.G ZN

CORONA CAMBIO Z-18 SV CORONA CAMBIO Z-20 SV MANIJA SV MUELLE TRAC. CAMBIO SV TORNILLO 6 X80 5737 8.G ZN

BROCHE TENDEUR DE CHAINE SV FICHE EL. 4 X24 DIN 1481

KETTENSPANNERSTIFT SV SPANNSTIFT 4 X24 DIN 1481

CLAVIJA TENSOR DE CADENA SV CLAVIJA EL.4 X24 DIN 1481

SCREW M12X1,75X110 5737 8.8 ZN TIGHTENER ROLLER SP CHAIN 1/2 ISO 083 42 SHACKLE WASHER D12 DIN 6798 D.INT.ZN NUT M12X1,25 D982 8 ZN GEARBOX RING GEAR Z-21 SV GEARBOX RING GEAR Z-19 SV LOWER SPACER SV GEARBOX RING GEAR Z-17 SV BOLT M 6X1X30 NUT M8 X1,25 U5588 6.8 ZN GEARBOX RING GEAR Z-21 SV GEARBOX RING GEAR Z-15 SV SCREW M8X 1.25X16 U5739 8.8 ZN SCREW M12X1.75X100 5739 8.8 ZN REGULATION BOLT

VIS 12X110 5737 8.G ZN ROULEAU TENDEUR SP

SCHRAUBE 12X110 5737 8.G ZN SPANNERROLLE SP

TORNILLO 12X110 5737 8.G ZN RODILLO TENSOR SP

RONDELLE D12 DIN 6798 D. INT. ECROU M12X1,25 D982 8 ZN COURONNE BOITE DE VITESSE COURONNE BOITE DE VITESSE ENTRETOISE INF. SV COURONNE BOITE DE VITESSE VIS M 6X1X30 ECROU M8 X1,25 U5588 6.8 ZN COURONNE BOITE DE VITESSE COURONNE BOITE DE VITESSE VIS M 8X16 VIS 12X100 5739 8.G ZN VIS RÉGLAGE ZN

UNT. SCHEIBE D12 DIN 6798 D.IN MUTTER M12X1,25 D982 8 ZN GETRIEBEKRANZ Z-21 SV GETRIEBEKRANZ Z-19 SV UNTERES DISTANZSTsCK SV GETRIEBEKRANZ Z-17 SV SCHRAUBE M 6X1X30 MUTTER M8 X1,25 U5588 6.8 ZN GETRIEBEKRANZ Z-21 SV GETRIEBEKRANZ Z-15 SV SCHRAUBE M 8X16 SCHRAUBE 12X100 5739 8.G ZN STELLSCHRAUBE ZN

ARANDELA D12 DIN 6798 D.INT.ZN DADO M12X1,25 D982 8 ZN CORONA CAMBIO Z-21 SV CORONA CAMBIO Z-19 SV DISTAN. INFERIOR SV CORONA CAMBIO Z-17 SV TORNILLO M 6X1X30 TUERCA M8 X1,25 U5588 6.8 ZN CORONA CAMBIO Z-21 SV CORONA CAMBIO Z-15 SV TORNILLO M 8X16 TORNILLO 12X100 5739 8.G ZN TORNILLO REGULACIÓN ZN

GALVANIZED BUSH EXTENSION SPR SCREW M6X1X16 U5739 8.8 ZN MUDGARD/FENDER COMPL. WHEEL 5.00-15 6PR RH. TRANSMISSION WHEEL ARMS ASSEMM Z-15 PINION SV GEARS- W/ HUB 1/2 Z-10 SV SNAP PIN D4,4 B/80 ZN SCREW 14X180 5737 8.G

DOUILLE RESSORT TRACTION ZN VIS M6X1X16 U5739 8.8 ZN PARE-BOUE ROUE COMPL. 5.00-15 6PR DRT. GR. BRAS ROUE ENTRAINEMENT PIGNON Z-15 SV ENGRENAGE AVEC MOYEU 1/2 Z-10 FICHE A DETENTE D4,4 B/80 ZN VIS 14X180 5737 8.G

ZUGFEDERBUCHSE SCHRAUBE M6X1X16 U5739 8.8 ZN KOTFL_GEL RAD KOMPL.5.00-15 6PR RE ANTRIEBSRADARME RITZEL Z-15 SV ZAHNRAD MIT NABE 1/2 Z-10 SV EINRASTSTIFT D4,4 B/80 ZN SCHRAUBE 14X180 5737 8.G

MANGUITO MUELLE DE TRACCIËN GA TORNILLO M6X1X16 U5739 8.8 ZN GUARDABARRO RUEDA COMPL.5.00-15 6PR DER. RUEDA DE TRANSMISIN R PI¾N Z-15 SV P ENGRAN.CON PERNO 1/2 Z-10 SV CLAVIJA DE MUELLE D4,4 B/80 ZN TORNILLO 14X180 5737 8.G

BOLT 10 X25 5933 10.9 GALVANIZ NUT M10X 1,5 D980 8 ZN

VIS 10 X25 5933 10.9 ZN ECROU M10X 1,5 D980 8 ZN

SCHRAUBE 10 X25 5933 10.9 ZN MUTTER M10X 1,5 D980 8 ZN

RESORTE TENSION CADENA DE RUED TORNILLO 10 X25 5933 10.9 ZN TUERCA M10X 1,5 D980 8 ZN

cod. G19530932

TAV. 081 17 16x16x 85 - 68 16x16x150 - 69 16x16x200 - 70 16x16x220 - 71 16x16x248 - 72 16x16x275 - 73 16x16x320 - 74

6 5 - Metrical (cm) 51 - Imperial (inch)

Z21- 29 Z20- 16 Z19- 30 Z18- 15 Z17- 32 Z16- 14

4 7

34 37

9 67

10 49

39 2

35 -Z21 36 -Z15

1 65

64 85 62 61 58

57 56 63

60 55

83 43 48 47

13 46

12 76

cod. G19530932

RUOTA DI TRASMISSIONE Pos.

Cod.

55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85

F01410064 F01030060 G15830460 G19005110 G18801450 F01420048 F02200452 G20910039 F01020231 F06080111 F01020445 G22310011 G15110091 G10920400 G22270089 G22230141 G22250276 G22250275 G22250031 G13732200 G15835131 F02050101 F04100137 G22250323 F01250040 F06120134 F06120170 F06120206 F05050025 G22505085 G66248218

TAV. 081

Descrizione

Description

Benennung

Descripcion

ROS.M10 10,5X 20X 2 U6592 ZN VITE M 8X1,25X35 U5933 10.9 ZD TENDICATENA SEM. R RULLO TENDICATENA BOCCOLA 8,25 X18 X17 ROS.M8 8,4X 24X 2 U6593 ZN SPINA SCATTO D.4,4 B/80 ZN INGRANAGGIO SUP.Z-20 FERRO * VITE M14X2X190 U5737 8.8 BR CATENA 1/2 ISO 084 113 MAGLIE VITE M8X1,25X30 U5739 8.8 ZN FLANGIA CAMBIO DP SCONTRO A U ASSE TRASM.L.850 ASSE TRASM.SEMINAT.L.1500 SP ASSE SEMINAT.6F.CM.80 L.2000 ASSE TRASM.SEMINAT.L.2200 SV ASSE TRASM.SEMINAT.L.2750 SV ASSE TRASM.SEMINAT.L.3200 SV ASSE TRASMISSIONE L.2485 ASS.SCATOLA CAMBIO R.5" ANELLO E. DE 25X 1,2 U7435 C70 SUPPORTO FY 25 TF ASSE RUOTA SV DADO COLON. 12X1.5 ZN CAMERA 15 L 290 COPERTURA 5.00-15 IM 110 6PR CERCHIO 3.00 D 15 PV RAL 9001 CAPPELLOTTO PROTEZ. X VALV.PVC FERMO ASSE IN LAMIERA RONDELLA DISTAN.SPAND.

WASHER M10 10,5X20X2 U6592 ZN SCREW M8X1,25X35 U5933 8.8 ZD SEEDER CHAIN TIGHTENER R

RONDELL.M10 10,5X20X2 U6592 ZN VIS 8X35 5933 8.8 ZN TENDEUR DE CHAINE SEMEUR R

SCHEIBE M10 10,5X20X2 U6592 ZN SCHRAUBE 8X35 5933 8.8 ZN KETTENSPANNER SZELEMENT R

BUSHING 8,25 X 18 X 17 WASHER M8 8,4X 24X 2 U6593 ZN SNAP PIN D4,4 B/80 ZN

BOITE 8,25 X18 X17 RONDELLE M8 8,4X 24X2 U6593 ZN FICHE A DETENTE D4,4 B/80 ZN

BsCHSE 8,25 X18 X17 SCHEIBE M8 8,4X 24X 2 U6593 ZN EINRASTSTIFT D4,4 B/80 ZN

ARAND. M10 10,5X20X2 U6592 ZN TORNILLO 8X35 5933 8.8 ZN TENSOR DE CADENA SEMBRADOR R RODILLO TENSIONA CADENA CASQUILLO 8,25 X18 X17 ARANDELA M8 8,4X 24X2 U6593 ZN CLAVIJA DE MUELLE D4,4 B/80 ZN

SCREW M14X2 X190 5737 8.8 BR CHAIN 1/2 ISO 084 113 BOLT M 8X30 GEARBOX FLANGE DP STRIKER TRANSMISSION AXLE L850 AXLE- SEEDING MACH.. GEARBOX L AXLE- 6-ROW SEEDER MACH. 80 CM AXLE- SEEDING MACH. GEARBOX L. AXLE- SEEDING MACH. GEARBOX L. AXLE- SEEDING MACH. GEARBOX L. TRANSMISSION AXLE L2485

VIS M 14 X190 5737 8.G

SCHRAUBE M 14 X190 5737 8.G

TORNILLO M 14 X190 5737 8.G

VIS M 8X30 BRIDE BOITE DE VITESSE DP BRIDE 150 MM AXE TRANSMISSION L.850 AXE ENTRAINEMENT SEMEUR L. 150 AXE SEMEUR 6 RANGEES CM. 80 L. AXE ENTRAINEMENT SEMEUR L. 220 AXE ENTRAINEMENT SEMEUR L. 275 AXE ENTRAINEMENT SEMEUR L.3200 AXE TRANSMISSION L.2485

SCHRAUBE M 8X30 FLANSCH GETRIEBE DP ANSCHLAG ANTRIEBSACHSE L.850 ACHSE SZELEMENTANTRIEB.L.1500 ACHSE SZAELEMENT 6 R.CM.80 L.2 ACHSE SZELEMENT-ANTRIEB.L.2200 ACHSE SZELEMENTANTRIEB L.2750 ACHSE SZELEMENTANTRIEB .L.3200 sBERTRAGUNGSACHSE L.2485

TORNILLO M 8X30 BRIDA CAMBIO DP ELEMENTO DE EMPALME EJE TRANSMISIN L 850 EJE TRANS.SEMBR. L.1500 SP EJE SEMBR. 6 FILAS. CM.80 L.20 EJE TRANS.SEMBR. L.2200 SV EJE TRANS.SEMBR. L.2750 SV EJE TRANS.SEMBR. L.3200 SV EJE TRANSMISIN L 2485 A

cod. G19530932

SEEGER RING E. 25X1,2 7435 C70 SUPPORT FY 25 TF WHEEL AXLE SV COLUMN NUT M12X1.5 STUD BOLT INNER TUBE 15 L.290 TYRE 500-15 IM110 4PR

SEEGER E. 25X 1,2 U7435 C70

SEEGERING E. 25X 1,2 U7435 C70

ANILLO E. 25X 1,2 U7435 C70

AXE ROUE SV ECROU M12X1. 5 COLONNE CHAMBRE 15 L 290 COUVERTURE 500-15 IM110 4PR

RADACHSE SV SCHRAUBBOLZENMUTTER M12X1.5 KAMMER 15 L 290 MANTEL 500-15 IM110 4PR

EJE RUEDA SV TUERCA 12X1.5 COLUMNA CAMARA 15 L 290 CUBIERTA 500-15 IM110 4PR

PLATE AXLE STOP MAN. SPR. SPACER WASHER

ARRET AXE EN TOLE RONDELLE ENTRETOISE EP. ENGRAI

FESTSTELLVORRICHTUNG BLECHACHS ABSTANDSCHEIBE DsNGERSTREUER

BLOQUEO EJE DE CHAPA ARANDELA DISTAN.ABONAD.

TAV. 141 3

serb. 1100 - 22

SPANDI 1100 PLA

SPANDI 850 PLA

mm 8500 mm 110

13 18

9 15

37 20

28 - L. 600 27 - L. 750 40 - L. 940 35 - L. 990 30 - L. 1170 26 - L. 1200 34 - L. 1400 25 - L. 1600 36 - L. 2000 29 - L. 2480 21 - L. 2980 31 - L. 3100 24 - L. 3980 33 - L. 5100 32 - L. 5800

15 38 8 17 4

15 7

23 8 5 - telaio 150x100 6 - telaio 150x150 16 11

12 - M14x160 19 - M14x220

16 11 12 - M14x160 19 - M14x220

cod. G19530932

SUPPORTI SPANDICONCIME IN PLASTICA Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40

G15470632 G15470642 G15171380 G15171390 G16670011 G15472901 G18701140 F20110706 F20110770 G20970142 G15110091 F01020225 F01020144 F01020465 F01200271 F01200306 F01200271 F01420059 F01020236 F20120346 G07000028 G15272961 G15275790 G07000370 G07000375 G15472970 G15472980 G15472990 G15475130 G15475300 G15475390 G15475400 G15475540 G20890207 G22220141 G22270115 G15475271 F01410064 G14276330 G15171650

Descrizione SUPP.SPANDI CENTR.DX SUPP.SPANDI CENTR.SX SUPPORTO ESTERNO SPANDI DX * SUPPORTO ESTERNO SPANDI SX * SUPPORTO SPANDI SUPPORTO SPANDI Q.150 RONDELLA 11 X35 X5 CAV.Q.M10X 1,5X 30 47X 60 ZN CAV.Q.M14X 2X 50 96X119 ZN RONDELLA 32X4X15,5 SCONTRO A U VITE M14X2X160 U5737 8.8 BR VITE M10X1,5X75 U5737 A2 IX VITE M10X1,5 X35 U5739 A2 IX DADO M10X 1,5 U5588 A2 IX DADO M14X 2 U5588 6.8 ZN DADO M10X 1,5 U5588 A2 IX ROS.M10 10,5X 30X2,5 U6593 IX VITE M14X2X220 U5737 8.8 BR PUNTALE Q 35 ALETT.POLIT.NERO TUBO Q. 35X 4X2980 RINFORZO SPANDICONCIME 1100 ASS.SUPPORTO ANT.SPANDI PLA TUBO Q. 35X 3X3980 TUBO Q. 35X 3X1600 TUBO Q. 35X 4X1200 TUBO Q. 35X 4X 750 TUBO Q. 35X 4X 600 TUBO SUPPORTO SERBATOIO L.2480 TUBO SUPPORTO MICRO L.1170 TUBO SUPPORTO MICRO L.3100 TUBO SUPPORTO MICRO L.5800 TUBO SUPPORTO MICRO L.5100 BARRA DIFFUSORI DISERBO L.1400 BRACCIO SCORREVOLE 4 FILE BRACC.SCORR.6F.100 L.2000 SP SUPPORTO MICRO ROS.M10 10,5X 20X 2 U6592 ZN SUPPORTO TUBO TUBO Q. 35X 4X 940

cod. G19530932

TAV. 141

Description

Benennung

Descripcion

MAN.SPR. EXT. RIGHT SUPPORT MAN.SPR.EXT.LEFT SUPPORT SPREADER SUPPORT SQ. FERTILIZER SPREADER SUPPOR WASHER 11 X 35 X 5 DISK SUPPORT.ELEMENT U BOLT SV U BOLT M14X2X50 96X119 ZN WASHER 32X4X15-5 STRIKER SCREW M 14 X160 5737 8.G BOLT M10X 1,5X 75 U5737 8.8 IX SCREW 10X35 5739 INOX A2 NUT 10 5588 6.8 INOX NUT M14X2 NUT 10 5588 6.8 INOX WASHER 11X30X2,5 6593 A2 SCREW M14X2X220 U5737 8.8 BR

SUPPORT EXT. DRT. EP. ENGRAIS SUPPORT EXT. GCH. EP. ENGRAIS SUPPORT +PANDEUR SUPPORT +PANDEUR CARR+ 150 RONDELLE 11 X35 X5 CAVALIER SUPPORT DISQUE SV BRIDE U M14X2X50 96X119 ZN RONDELLE 32X4X15-5 BRIDE 150 MM VIS M 14 X160 5737 8.G VIS M10X 1,5X 75 U5737 8.8 IX VIS 10X35 5739 INOX A2 ECROU 10 5588 6.8 INOX ECROU M14X2 ECROU 10 5588 6.8 INOX RONDELLE 11X30X2,5 6593 A2 VIS M14X2X220 U5737 8.8 BR

RECHTE ZUSSERE HALTER.DsNGERST LINKER ZUSSERE HALTER.DsNGERST HALTERUNG SPANDI HALTERUNG SPANDI Q.150 UNTERLEGSCHEIBE 11 X35 X5 VERBINDUNG SCHEIBENHALTERUNG S ANSCHLANG U M14X2X50 96X119 ZN UNTERLEGSCHEIBE 32X4X15-5 ANSCHLAG SCHRAUBE M 14 X160 5737 8.G SCHRAUBE M10X 1,5X 75 U5737 8. SCHRAUBE 10X35 5739 INOX A2 MUTTER 10 5588 6.8 INOX MUTTER M14X2 MUTTER 10 5588 6.8 INOX UNTERLEGSCHEIBE 11X30X2,5 6593 SCHRAUBE M14X2X220 U5737 8.8

SOPORTE EXT.DER. ABONADORA . SOPORTE EXTERIOR IZQ.ABONADORA SOPORTE ABONADORA SOPORTE ABONADORA Q.150 ARANDELA 11 X35 X5 PERNO EN U SOP. DISCO SV EL.DE EMPALME M14X2X50 96X119 ARANDELA 32X4X15-5 ELEMENTO DE EMPALME TORNILLO M 14 X160 5737 8.G TORNIL. M10X 1,5X 75 U5737 8.8 TORNILLO 10X35 5739 INOX A2 TUERCA 10 5588 6.8 INOX DADO M14X2 TUERCA 10 5588 6.8 INOX ARANDELA 11X30X2,5 6593 A2 TORNILLO M14X2X220 U5737 8.8

SQUARE PIPE 35 X 35 X 3 X 2980 FERTILIZER 1100 REINFORCEMENT

TUBE CARRE 35 X 35 X 3 X 2980 RENFORT EPANDEUR D'ENGRAIS 110

VIERKANTROHR 35 X 35 X 3 X 298 VERSTZRKUNG DsNGERSTREUER 1100

TUBO CUADRADO 35 X 35 X 3 X 29 REFUERZO ABONADORA 1100

SQUARE PIPE 35X35X4X3980 SQUARE PIPE 35X35X4X1600 SQUARE PIPE 35 X4 X1200 SQUARE PIPE 35 X4 X750 SQUARE PIPE 35 X4 X600 TANK SUPPORT PIPE L.2480 MICRO SUPPORT PIPE L.1170 MICRO SUPPORT PIPE L.3100 MICRO SUPPORT PIPE L.3800 MICRO SUPPORT PIPE L.5100 WEEDKILLER SPREADER BAR L.1400 SLIDING ARM- 4-ROW SLIDING ARM 6-R. 100 L.2000 SP MICRO SUPPORT WASHER M10 10,5X20X2 U6592 ZN

TUBE CARRE 35X35X4X3980 TUBE CARRE 35X35X4X1600 TUBE CARRE 35 X4 X1200 TUBE CARRE 35 X4 X750 TUBE CARRE 35 X4 X600 TUBE SUPPORT RESERVOIR L2460 TUBE SUPPORT MICRO L1170 TUBE SUPPORT MICRO L3100 TUBE SUPPORT MICRO L5800 TUBE SUPPORT MICRO L5100 BARRE DIFFUSEURS DESHERBAGE L. BRAS GLISSANT 4 RANGEES BRAS GLISS. 6 RANG. 100 L. 200 SUPPORT MICROGRANULATEUR RONDELL.M10 10,5X20X2 U6592 ZN

VIERKANTROHR 35X35X4X3980 VIERKANTROHR 35X35X4X1600 VIERKANTROHR 35 X4 X1200 VIERKANTROHR 35 X4 X750 VIERKANTROHR 35 X4 X600 ROHR HALTERUNG BEHZLTER L.2480 ROHR HALTERUNG MIKRO L.1170 ROHR HALTERUNG MIKRO L.3100 ROHR HALTERUNG MIKRO L.5800 ROHR HALTERUNG MIKRO L.5100 DIFFUSORENSTANGE UNKRAUTVERT. GLEITARM 4 REIHEN GLEITARM 6R.100 L.2000 SP HALTERUNG MICRO SCHEIBE M10 10,5X20X2 U6592 ZN

TUBO CUADRADO 35X35X4X3980 TUBO CUADRADO 35X35X4X1600 TUBO CUADRADO 35 X4 X1200 TUBO CUADRADO 35 X4 X750 TUBO CUADRADO 35 X4 X600 TUBO SOPORTE DEPSITO L 2480 T TUBO SOPORTE MICRO L1170 TUBO SOPORTE MICRO L.3100 TUBO SOPORTE MICRO L.5800 TUBO SOPORTE MICRO L 51000 BARRA DIFUSORES HERBICIDA L.1 BRAZO CORREDIZO 4 FILAS BRAZO CORRED. 6 FILAS. 100 L.2 SOPORTE MICRO ARAND. M10 10,5X20X2 U6592 ZN

TAV. 151 serb. 850 - 4 serb. 1100 - 64 38 59

33 50

serb. 850 - 7 serb. 1100 - 65

(*) (**)

2 - serb. 850 62 - serb. 1100

3 - serb. 850 63 - serb. 1100

31 36

mm 850 m m 0 11 0

44 26

53 44

36 31

40 1

E D C B A

48 19

20 13 49

(***) 21

69 78 70 73

76 72

14 - L. 500 67 - L. 1180 68 - L. 1375

23 8

31 36

18 - L. 1460 61 - L. 1160

serb. 850 - 11 serb. 1100 - 66

41 52

*** Kit ingranaggi (2+2 pezzi)

77 24 34

60 12

cod. G19530932

SPANDICONCIME IN PLASTICA Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54

G14830390 G20860121 G20860122 G15470580 G15471930 G15471990 G15472760 G15472770 G15472780 G19002710 G19004470 G19002850 G19002920 G20860012 G20860052 G20860086 G20860088 G20860090 G20860093 G20860106 G20860126 G19005040 G22505085 G20970097 G20970125 G22220073 G22230094 G22250287 F01020043 F01020068 F01020403 F01020432 F01020472 F01070075 F01070011 F01200232 F01200244 F01220033 F01410037 F01410051 F02100079 F02100089 F02100114 F03011081 F06080196 F03100500 G65336025 G65336055 G65336062 G65336064 G65336065 G65338043 G66248121 G66248125

TAV. 151

Descrizione

Description

Benennung

CUSCINETTO FORO QUADRO ASSE AGITAT.DX SERB.850 COMPL. ASSE AGITAT.SX SERB.850 COMPL. COPERCHIO SERBATOIO 850 PROTEZIONE SUPPORTO COCLEA GRIGLIA SERBATOIO PLASTICA 850 DISTR.COMPL.8PALE SPANDI PL TAPPO SPANDI PLASTICA PROTEZ.RINVIO SPANDICONCIME SERBATOIO CONCIME 850 PROTEZIONE PIGNONE CORPO DISTRIBUTORE SPANDI PLA. MANICOTTO DI UNIONE L.500 REGOLATORE APERTURA INGRANAGGIO 1/2 Z-12 F.Q. INGRANAGGIO 1/2 Z-12 F.T. ASSE SX 5F.60 L.1460 VITE DI REGOL. DOSATORE SPANDI 8 PALE COMPL. KIT INGR DISTR CONCIME (2+2) BOCCOLA ASSE SPANDI FERMO ASSE IN LAMIERA RONDELLA 32X3X4,5 RONDELLA 28X2,5X6,5 RONDELLA 28X0,3X16,5 SUPPORTO CUSCINETTO MANICOTTO DISTANZIALE SV VITE M6X1X60 U5737 8.8 ZN VITE M 8X1,25X40 U5737 8.8 ZN VITE M6X1X16 U5739 8.8 ZN VITE M 8X1,25X16 U5739 8.8 ZN VITE M10X1,5X25 U5739 8.8 ZN VITE M4,2X1,41X38 U6954 4.8 NI VITE M4,2X1,41X9,5 U6950 4.8NI DADO M 6X 1 U5588 6.8 ZN DADO M 8X1,25 U5588 6.8 ZN DADO M10X 1,5 D980 8 ZN ROS.M6 6,4X12,5X1,6 U6592 ZN ROS.M8 8,4X 17X1,6 U6592 ZN SPINA E.P. 5X 16 U6873 C70 BR SPINA E.P. 5X 36 U6873 C70 BR SPINA E.P. 6X 30 U6873 C70 BR GUARNIZIONI LABBRO DE100 CATENA 1/2 ISO 083 32 MAGLIE TUBO EOLO 35 PU MOLLA SPEC.ZN STRINGIT.ASP.SP MOLLA SPEC.REGOL.SPAND. SP MOLLA SPEC.SCIV.DISTR.SPAND.SP MOLLA SPEC.COCLEA DX SPAND.HL MOLLA SPEC.COCLEA SX SPAND.HL MOLLA COMP.ZN SERB. M80 BOCCOLA CON FLANGIA M80 GHIERA REGOLAZIONE M80

SQUARE-HOLED BEARING STIRRER SPINDLE- RIGHT 850 TAN STIRRER SPINDLE- LEFT 850 TANK TANK TOP 850 GUARD SCREW SUPPORT PLASTIC TANK GRID 850 COMPL.PLAS.FERTIL.DISTR.8RIBS PLASTIC FERT. SPREADER PLUG FERTILIZER TRANSM. PROTECTION FERTILIZER HOPPER 850 PINION GUARD PLA. F.SPREADER DISTRIB.CASING JOINT SLEEVE L.500 OPENING REGULATOR GEAR 1/2 Z-12 F.Q. GEAR 1/2 Z-12 F.T. AXLE- LEFT 5-R.60 L.1460 ADJUSTMENT BOLT FERT.METERING DEVICE ASS.8 GRO KIT- MAN. DISTR. GEARS (2+2) FERT. SPREADER AXLE BUSH PLATE AXLE STOP WASHER 32X3X4-5 WASHER 28X2-5X6-5 WASHER 28X0-3X16-5 BEARING SUPPORT SPACER SLEEVE SV SCREW M6X 1X60 U5737 8.8 ZN SCREW M8X1,25X40 U5737 8.8 ZN SCREW M6X1X16 U5739 8.8 ZN SCREW M8X 1.25X16 U5739 8.8 ZN BOLT 10X25 5739 8.G GALVANIZED BOLT 4-2X38 DIN 7981 BOLT- SELF-TAPPING 4-2X9-5T.E. NUT 6 UNI 5588 6.8 GALVANIZED NUT M8 X1,25 U5588 6.8 ZN NUT M10X 1,5 D980 8 ZN PLANE WASHER D.6 WASHER M8 8,4X17X1,6 U6592 ZN PIN EL. 5X 16 U6873 C70 BR PIN EL. 5X 36 U6873 C70 BR ELASTIC PIN 6X30 LIP GASKET D100 CUT-DOWN CHAIN .1/2 ISO 083 32 TUBE EOLO 35 PU SPEC SPRING ZN FAN . PIPE CLAM SPEC SPRING MAN. SPR. ADJUSTM. SPEC SPRING - MAN. SPR. DISTR. SPEC. WORM SCREW SPRING RIGHT SPEC. WORM SCREW SPRING LEFT M ZN TANK COMP.SPRING M80 BUSHING W/ FLANGE M80 ADJUSTMENT KNURLED NUT M80

ROULEMENT AL+SAGE CARR+ AXE AGITATEUR DRT. RESERVOIR 8 AXE AGITATEUR GCH. RESERVOIR 8 COUVERCLE RESERVOIR 650 PROTECTION SUPPORT VIS ALIMENTATION GRILLE RESERVOIR PLASTIQUE 850 MINIMAX COMPL 8C PLA BOUCHON EPAND. PLASTIQUE PROTECTION RENVOI FERTILISEUR TR+MIE ENGRAIS 850 PROTECTION PIGNON CORPS DISTRIBUTEUR EPAND. MANCHON DE RACCORD L. 500 REGULATEUR OUVERTURE ENGRENAGE 1/2 Z-12 TROUS CARRE ENGRENAGE 1/2 Z-12 TROUS RONDS AXE GCH. 5 RANGEES 60 L. 1460 VIS DE REGLAGE ROTOR DOSEUR 8C FERTIL COMPL. COUPLE CON DISTR ENGRAIS (2+2) DOUILLE AXE +PANDEUR ARRET AXE EN TOLE RONDELLE 32X3X4-5 RONDELLE 28X2-5X6-5 RONDELLE 28X0-3X16-5 SUPPORT PALIER MANCHON ENTRETOISE SV VIS 6 X60 5737 8.G ZN VIS M 8X1,25X40 U5737 8.8 ZN VIS M6X1X16 U5739 8.8 ZN VIS M 8X16 VIS 10X25 5739 8.G ZN VIS 4-2X38 DIN 7981 VIS AUTOTAR. 4-2X9-5 T. E. COU ECROU 6 UNI 5588 6.8 ZN ECROU M8 X1,25 U5588 6.8 ZN ECROU M10X 1,5 D980 8 ZN RONDELLE D.6 RONDEL. M8 8,4X17X1,6 U6592 ZN

VIERKANTLAGER COJINETE ORIFICIO CUADRADO SAMENMISCHERACHSE RE BEH.850 EJE AGITAD. DER. DEPS.850 COMA SAMENMISCHERACHSE LI BEH.850 EJE AGITAD. IZQ. DEPS. 850 COA BEHZLTERDECKEL 850 TAPA DEPSITO 850 A SCHUTZ PROTECCIN P HALTERUNG SCHNECKE SOPORTE CCLEA S BEHZLTERGITTER PLAST.850 REJILLA DEPSITO PLAST.850 G KOMPL.DOSIER.PLA.DÜNGERSTR.8S DISTR.COMP.ABONO PLAST. 8AL. PLASTIKPFROPFEN DsNGERSTR. TAPN ABONADORA PLæSTICO D SCHUTZ VORGELEGE DUNGERSTREUER PROTECCION TRANSMISION ABONADO D_NGERTANK 850 DEPËSITO ABONO 850 RITZELSCHUTZ PROTECCIN PI¾N PR VERTEILUNGSKTRPER STREUER PLA. CUERPO DIST. ABONADORA PLæS. VERBINDUNGSMUFFE L.500 MANGUITO DE UNIN L.500 M TFFNUNGSEINSTELLER REGULADOR ABERTURA ZAHNRAD 1/2 Z-12 F.Q. ENGRANAJE 1/2 Z-12 F.Q. ZAHNRAD 1/2 Z-12 F.T. ENGRANAJE 1/2 Z-12 F.T. ACHSE LI 5R.F.60 L.1460 EJE IZQ. 5 FILA. 60 L.1460 EINSTELLSCHRAUBE. TORNILLO DE REGULACIN S DOSIERER DUNGER.KOMPL. 8 SEKT DOSIFICADOR ABONO COMP.8 SECT KIT ZAHNRZDER DsNGERSTREUER SET ENGRANAJES DISTRIB. ABONO ACHSENBUCHSE STREUER MANGUITO -RBOL ABONADORA FESTSTELLVORRICHTUNG BLECHACHS BLOQUEO EJE DE CHAPA UNTERLEGSCHEIBE 32X3X4-5 ARANDELA 32X3X4-5 UNTERLEGSCHEIBE 28X2-5X6-5 ARANDELA 28X2-5X6-5 UNTERLEGSCHEIBE 28X0-3X16-5 ARANDELA 28X0-3X16-5 LAGERBsCHSE SOPORTE COJINETE ABSTANDSMUFFE SV MANGUITO DISTANCIADOR SV SCHRAUBE 6 X60 5737 8.G ZN TORNILLO 6 X60 5737 8.G ZN SCHRA. M8X1,25X40 U5737 8.8 ZN TORNIL.M8X1,25X40 U5737 8.8 ZN SCHRAUBE M6X1X16 U5739 8.8 ZN TORNILLO M6X1X16 U5739 8.8 ZN SCHRAUBE M 8X16 TORNILLO M 8X16 SCHRAUBE 10X25 5739 8.G ZN TORNILLO 10X25 5739 8.G ZN SCHRAUBE 4-2X38 DIN 7981 TORNILLO 4-2X38 DIN 7981 SELBSTSCHNEID. SCHRAUBE 4-2X9TORNILLO AUTORROSC. 4-2X9-5 MUTTER 6 UNI 5588 6.8 ZN TUERCA 6 UNI 5588 6.8 ZN MUTTER M8 X1,25 U5588 6.8 ZN TUERCA M8 X1,25 U5588 6.8 ZN MUTTER M10X 1,5 D980 8 ZN TUERCA M10X 1,5 D980 8 ZN SCHEIBE D.6 ARANDELA D.6 SCHEIBE M8 8,4X17X1,6 U6592 ZN ARANDELA M8 8,4X17X1,6 U6592ZN

FICHE EL. 5X 36 U6873 C70 BR GOUJON ELASTIQUE 6X30

STIFT EL. 5X 36 U6873 C70 BR SPANNHUELSE 6X30

CLAVIJA EL. 5X 36 U6873 C70 BR ESPINA ELASTICA 6X30

TRONCON CHAINE 1/2 ISO 083 32 TUBE EOLO 35 PU RESSORT SPEC. ZN SERRE-TUBE AS RESSORT SPEC. REGL. EP. ENTRAI RESS. SPEC. LANCOIR DISTR. EP. RESSORT SPEC. VIS DRT. EP. ENG RESSORT SPEC. VIS GCH. EP. ENG RESSORT COMPL. ZN RESERVOIR M8 SUPPORT AVEC BRIDE M80 BAGUE REGLAGE M80

KETTENLZNGE 1/2 ISO 083 32 GL

TRECHO CADENA 1/2 ISO 083 32

SPEZIALFEDER ZN RORHSCHELLE AB SPEZIALFEDER STREUEREINSTELLUN SPEZ.FEDER RUTSCHE SZAPP. STRE SPEZ.FEDER RE SCHNECKE STREUER SPEZ.FEDER LI SCHNECKE STREUER DRUCKFEDER ZN BEHZLTER M80 BsCHSE MIT FLANSCH M80 EINSTELLMUTTER M80

MUELLE ESPEC. ZN APRIETA TUBOS MUELLE ESPEC. REGUL. ABONADORA MUELLE ESPEC.PLANO INCL.DISTR. MUELLE ESPEC. TORN.S/F DER. AB MUELLE ESPEC. TORN.S/F IZQ. AB MUELLE COMP.ZN DEPS. M80 A CASQUILLO CON BRIDA M80 CONTRATUERCA REGULACIN M80 G

cod. G19530932

Descripcion

TAV. 151 serb. 850 - 4 serb. 1100 - 64 38 59

33 50

serb. 850 - 7 serb. 1100 - 65

(*) (**)

2 - serb. 850 62 - serb. 1100

3 - serb. 850 63 - serb. 1100

31 36

mm 850 m m 0 11 0

44 26

53 44

36 31

40 1

E D C B A

48 19

20 13 49

(***) 21

69 78 70 73

76 72

14 - L. 500 67 - L. 1180 68 - L. 1375

23 8

31 36

18 - L. 1460 61 - L. 1160

serb. 850 - 11 serb. 1100 - 66

41 52

*** Kit ingranaggi (2+2 pezzi)

77 24 34

60 12

cod. G19530932

SPANDICONCIME IN PLASTICA Pos.

Cod.

55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80

G66248178 G66248207 G66248218 F03150757 G19702751 G18701500 G20860032 G15271540 G15271550 G15471920 G15473130 G19003060 G20910045 G20910044 G18903220 G18903210 G15110091 F01020225 F01020512 F01200306 F01220048 G15470231 G16670610 G18901092 G18902861 G18903911

TAV. 151

Descrizione

Description

Benennung

Descripcion

SCIVOLO DISTR.SPAND. SP TENDICATENA SPAND. SP-520 RONDELLA DISTAN.SPAND. TAPPO FILETT.SERBAT.PLASTICA DECAL.TABELLA CONCIME 'V'99 RONDELLA 29,5 X38 X0,3 ASSE RUOTA CAMBIO L.1160 ASSE AGITATORE DX 1100 ASSE AGITATORE SX 1100 COPERCHIO SERBATOIO L.1100 GRIGLIA SERBATOIO 1100 PLAST. SERBATOIO 1100 PLASTICA MANICOTTO UNIONE L.1180 MANICOTTO UNIONE L.1375 RINF.MOLLA CONCIM.FILE DISP. MOLLA CONCIM.FILE DISPARI SCONTRO A U VITE M14X2X160 U5737 8.8 BR VITE M12X1,75X35 U5739 8.8 ZN DADO M14X 2 U5588 6.8 ZN DADO M12X1,75 D980 8 ZN SUPPORTO MOLLA PIATTA CON.150* FALCIONE ELEM.CONCIMAZ.PIATTA GAMBO CONCIMAZ.MOLLA PIATTA SP RINF.MOLLA PIATTA CONCIM.SP MOLLA FERMO TUBO D.35

CHUTE- MANURE-SPREADER DISTRIB CHAIN TENSIONER MAN. SPR. SPACER WASHER SCREWED PLUG FOR PLASTIC TANK V 99 FERTILIZER CHART STICKER WASHER 29,5 X 38 X 0,3 WHEEL AXLE - GEARBOX L.1160 STIRRER SPINDLE-RIGHT 1100 TAN STIRRER SPINDLE- LEFT 1100 TANK COVER L.1100 PLASTIC TANK GRID 1100 PLASTIC TANK 1100 JOINT SLEEVE L.1180 JOINT SLEEVE L.1375 ODD NUM. ROW MANUR.SPRING REIN ODD NUMBER ROW MANUR.SPRING STRIKER SCREW M 14 X160 5737 8.G SCREW M12X1,75X35 5739 8.8 ZN NUT M14X2 NUT M12X1,75 D980 8 ZN CONC. FLAT SPRING SUPPORT 150

LANCOIR DISTRIBUTION EP. ENGR. TENDEUR DE CHAINE EPAND. ENGR. RONDELLE ENTRETOISE EP. ENGRAI

DsNGERSTREUER RUTSCHE SP KETTENSPANNER DsNGERSTR. SP-52 ABSTANDSCHEIBE DsNGERSTREUER

PLANO INCLINADO DISTR. ABON. S TENSOR DE CADENA ABON. SP-520 ARANDELA DISTAN.ABONAD.

DECALC. TABLEAU ENGRAIS V 99 RONDELLE 29,5 X38 X0,3 AXE ROUE BOITE DE VITESSE AXE AGITATEUR DRT.RESERV.1100 AXE AGITATEUR GCH. 1100 COUVERCLE RESERVOIR L.1100 GRILLE RESERVOIR PLAST.1100 RESERVOIR 1100 PLASTIQUE MANCHON RACCORD L. 1180 MANCHON RACCORD L. 1375 RENF. RESS. FUMAGE RANGEES IMP RESS. FUMAGE RANGEES IMPAIRES BRIDE 150 MM VIS M 14 X160 5737 8.G VIS M12X1,75X35 5739 8.8 ZN ECROU M14X2 ECROU M12X1,75 D980 8 ZN SUPP. RESSORT PLAT FUMAGE 150

ABZIEHB. TABELLE DsNGER V 99 UNTERLEGSCHEIBE 29,5X38X0,3 GEBTRIEBERADACHSE L 1160 SAMENMISCHERACHSE RE BEH.1100 SAMENMISCHERACHSE LINKER 1100 BEHZLTERDECKEL L.1100 BEHZLTERGITTER PLAST.1100 PLASTIKBEHZLTER 1100 VERBINDUNGSMUFFE L.1180 VERBINDUNGSMUFFE L.1375 VERST. FEDER DsNG. UNGERADE RE FEDER DsNGUNG UNGERADE REIHEN ANSCHLAG SCHRAUBE M 14 X160 5737 8.G SCHR. M12X1,75X35 5739 8.8 ZN MUTTER M14X2 SCHEIBE M12X1,75 D980 8 ZN HALTERUNG DsNGERPLATTENFEDER 1

CAL.TABLA ABONO V 99 ARANDELA 29,5 X38 X0,3 EJE RUEDA CAMBIO L.1160 EJE AGITAD.DER.DEPS.1100 COM A EJE AGITAD. IZQ. 1100 TAPA DEPS.L.1100 A REJILLA DEPSITO PLAST.1100 G DEPSITO 1100 PLæSTICA B MANGUITO DE UNIN L.1180 M MANGUITO DE UNIN L.1375 M REFUERZO MUELLE ABONO FILAS IM MUELLE ABONO FILAS IMPARES ELEMENTO DE EMPALME TORNILLO M 14 X160 5737 8.G TORN. M12X1,75X35 5739 8.8 ZN DADO M14X2 TUERCA M12X1,75 D980 8 ZN SOPORTE MUELLE CHATO DE ABONO1

FLAT SPRING MANURING LEG SP MANUR.PLATE SPRING REINFORCE.S PIPE LOCK SPRING D.35

TIGE FUMAGE RESSORT PLAT SP RENF. RESSORT PLAT FUMAGE SP RESSORT ARR-T TUBE D.35

SCHAFT DsNGUNG FLACHE FEDER SP VæSTAGO ABONO MUELLE CHATO SP VERSTZRKUNG FLACHFEDER DsNGUNG REFUERZO MUELLE ABONO SP ROHRSPERRFEDER D.35 MUELLE TOPE TUBO D. 35

cod. G19530932

TAV. 181 150x150 - 6 150x100 - 69

33 74 32

23 2 34

Standard - 46 Umostart - 68

47 31

28 38

8 - L. 2000 10 - L. 2480 70 - L. 2980 71 - L. 3980 72 - L. 5100 73 - L. 5800

57 32 4

26 31

37 60

31 35

30 49

13 36

31 35 27

26 12

61 - L. 250 62 - L. 440 63 - L. 470 64 - L. 550 65 - L. 690 66 - L. 1110 67 - L. 1620

43 52 42

16 15

17 51 56

19 (*)

24 33 45

25 - 150x100 58 - 150x150

(*) Kit ingranaggi cod. 20890211 (2+2 pezzi)

cod. G19530932

MICROGRANULATORE Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54

G19002932 G15475231 G15475260 G15475271 G15870251 G15475382 G15475411 G22270115 G18903191 G15475130 G20890078 G20890079 G20890081 G20890089 G20890135 G20890151 G20890158 G20890194 G20890211 F01420011 G22220073 F20110706 F20110770 G15110091 F01020229 F01020397 F01020403 F01020472 F01070061 F01070121 F01200232 F01200270 F01200306 F01220033 F01410088 F02200161 F02200162 F02200194 F02100083 F02100089 F03011081 F02300017 G65336041 G65336046 G22250240 G19702731 G65338043 G66248119 G66248120 G66248121 G66248123 G66248125 G66248126 G66248138

TAV. 181

Descrizione

Description

Benennung

Descripcion

SERBATOIO MICRO 250 PLA. COPERCHIO MICRO 250 PLA. SCONTRO SP SUPPORTO MICRO TUBO DISCESA MICRO ORTAG.COMPL TIRANTE MICRO TEL.150 SUPP.BARRA MICRO M.S.SPAN. BRACC.SCORR.6F.100 L.2000 SP MOLLA SPEC.ZN DISCESA MICRO TUBO SUPPORTO SERBATOIO L.2480 PIASTRA DI COLLEGAMENTO PIASTRA DI CHIUSURA ASSE DISTRIB.MICRO L.445 REGOLATORE DI APERTURA DISTRIB.NYLON COMPL.E SCIVOLO VITE-SCALA GRADUATA DOSATORE MICRO COMPL. ASSE AGITATORE SERB.MICRO 250 KIT INGRANAGGI DISTRIB.MICRO ROS.M4 4,3X 16X 1 U6593 ZN RONDELLA 28X0,3X16,5 CAV.Q.M10X 1,5X 30 47X 60 ZN CAV.Q.M14X 2X 50 96X119 ZN SCONTRO A U VITE M14X2X180 U5737 8.8 BR VITE M6X1X10 U5739 8.8 ZN VITE M6X1X16 U5739 8.8 ZN VITE M10X1,5X25 U5739 8.8 ZN VITE M3,9X1,34X9,5 U6954 4.8NI VITE M3,9X1,34X9,5 6955 4.8NI DADO M 6X 1 U5588 6.8 ZN DADO M10X 1,5 U5588 6.8 ZN DADO M14X 2 U5588 6.8 ZN DADO M10X 1,5 D980 8 ZN ROS.M14 15X 28X2,5 U6592 ZN COPIGLIA 3X 15 U1336 ZN COPIGLIA 3X 20 U1336 ZN COPIGLIA 4X 25 U1336 ZN SPINA E.P. 5X 24 U6873 C70 BR SPINA E.P. 5X 36 U6873 C70 BR GUARNIZIONI LABBRO DE100 FASCETTA STRING. 20/32 H.9 MOLLA SPEC.ZN STRINGITUBO M80 MOLLA SPEC.ZN SCIVOLO M80 DOSATORE COMPL. SV DECAL.TABELLA MICRO V99 MOLLA COMP.ZN SERB. M80 RUOTA DENTATA Z-24 M80 RUOTA DENT.FORO QUAD.Z-24 M80 BOCCOLA CON FLANGIA M80 CORPO DISTRIBUZIONE M80 GHIERA REGOLAZIONE M80 SUPP.TRASMISSIONE M80 COPERCHIO SUPP.TRASM. M80

PLASTIC TANK MICRO 250 PLASTIC COVER MICRO 250 STRIKER PLATE SP MICRO SUPPORT

RESERVOIR MICRO 250 PLASTIQUE COUVERCLE MICRO 250 PLASTIQUE BUTEE SP SUPPORT MICROGRANULATEUR

MIKROGRANULATBEHZLTER PLAST. MIKRO DECKEL 250 PLAST. ANSCHLAG STREUER HALTERUNG MICRO

DEPSITO MICRO 250 PLAST. TAPA MICRO 250 PLAST. ELEMENTO DE EMPALME SP SOPORTE MICRO

M.S. FERTILISER SPREADER MICRO SLIDING ARM 6-R. 100 L.2000 SP SPEC.SPRING ZN MICRO GUIDE TANK SUPPORT PIPE L.2480 CONNECTION PLATE CLOSURE PLATE MICRO DISTR. SPINDLE- L. 445 OPENING REGULATOR DISTRIB. NYLON ASSY. AND CHUTE GRADUATED SCALE BOLT ROTOR DIST. MICRO 20 GROOVES STIRRER SPINDLE- MICRO TANK 25

SUPPORT BARRE MICRO M.S. EPAND BRAS GLISS. 6 RANG. 100 L. 200 RESSORT SPEC. ZN GUIDE MICRO TUBE SUPPORT RESERVOIR L2460 PLAQUE DE RACCORD PLAQUE DE FERMETURE AXE DISTRIBUTEUR MICRO L. 445 REGULATEUR D'OUVERTURE MINIMAX COMPL 20C MICRO VIS-ECHELLE GRADUEE ROTOR DOSEUR 20C MICRO COMPL. AXE AGITATEUR RESERVOIR MICRO

MIKRO SPINDELHALTERUNG M.S. Ds GLEITARM 6R.100 L.2000 SP SPEZIALFEDER ZN F_HR.MIKRO ROHR HALTERUNG BEHZLTER L.2480 VERBINDUNGSPLATTE ABSCHLUSSPLATTE MIKRO STREUERACHSE L 445 TFFNUNGSEINSTELLER SZAPPARAT NYLON KOMPL. UND RUT SCHRAUBE - GRADSKALA DOSIERER MIKRO KOMPL. 20 SEKT SAMENMISCHERACHSE BEH.MIKRO 25

FLAT WASHER 4-3X 16X1-5 6593 G WASHER 28X0-3X16-5 DISK SUPPORT.ELEMENT U BOLT SV U BOLT M14X2X50 96X119 ZN STRIKER SCREW 14X180 5737 8.G SCREW M 6X 1X 10 U5739 8.8 ZN SCREW M6X1X16 U5739 8.8 ZN BOLT 10X25 5739 8.G GALVANIZED BOLT 3,9X 9,5 DIN 7981 BOLT 3-9X 9-5 DIN 7982 NUT 6 UNI 5588 6.8 GALVANIZED NUT M10X 1,5 U5588 6.8 ZN NUT M14X2 NUT M10X 1,5 D980 8 ZN WAS.M14 15X 28X2,5 U6592 ZB SPLIT PIN 3 X15 1336 GALVAN. SPLIT PIN 3 X20 1336 GALVAN. SPLIT PIN 4 X25 1336 GALVAN. PIN EL. 5 X24 DIN 1481 PIN EL. 5X 36 U6873 C70 BR LIP GASKET D100 CABLE TIE 20/32 H.9 SPEC.SPRING ZN . PIPE CLAMP M8 SPEC SPRING ZN CHUTE M80 MICRO DISTR.ROTOR 8 GROOVES V 99 MICRO CHART STICKER ZN TANK COMP.SPRING M80 GEAR-WHEEL Z-24 M80 GEAR-WHEEL- SQUARE HOLE- Z-24 BUSHING W/ FLANGE M80 DISTRIBUTION CASING M80 ADJUSTMENT KNURLED NUT M80 TRANSM.SUPPORT M80 TRANSMISSION SUPP. COVER M80

ROND.PLATE 4-3X 16X1-5 6593 ZN RONDELLE 28X0-3X16-5 CAVALIER SUPPORT DISQUE SV BRIDE U M14X2X50 96X119 ZN BRIDE 150 MM VIS 14X180 5737 8.G VIS 6X10 5739 8.G ZN VIS M6X1X16 U5739 8.8 ZN VIS 10X25 5739 8.G ZN VIS 3,9X 9,5 DIN 7981 VIS 3-9X 9-5 DIN 7982 ECROU 6 UNI 5588 6.8 ZN ECROU M10X 1,5 U5588 6.8 ZN ECROU M14X2 ECROU M10X 1,5 D980 8 ZN RON.M14 15X 28X2,5 U6592 ZB GOUPILLE 3 X15 1336 ZN GOUPILLE 3 X20 1336 ZN GOUPILLE 4 X25 1336 ZN FICHE EL. 5 X24 DIN 1481 FICHE EL. 5X 36 U6873 C70 BR

SCHEIBE 4-3X 16X1-5 6593 ZN UNTERLEGSCHEIBE 28X0-3X16-5 VERBINDUNG SCHEIBENHALTERUNG S ANSCHLANG U M14X2X50 96X119 ZN ANSCHLAG SCHRAUBE 14X180 5737 8.G SCHRAUBE 6X10 5739 8.G ZN SCHRAUBE M6X1X16 U5739 8.8 ZN SCHRAUBE 10X25 5739 8.G ZN SCHRAUBE 3,9X 9,5 DIN 7981 SCHRAUBE 3-9X 9-5 DIN 7982 MUTTER 6 UNI 5588 6.8 ZN MUTTER M10X 1,5 U5588 6.8 ZN MUTTER M14X2 MUTTER M10X 1,5 D980 8 ZN SCH.M14 15X 28X2,5 U6592 ZB SPLINT 3 X15 1336 ZN SPLINT 3 X20 1336 ZN SPLINT 4 X25 1336 ZN SPANNSTIFT 5 X24 DIN 1481 STIFT EL. 5X 36 U6873 C70 BR

SOPORTE BARRA MICRO M.S. ABONA BRAZO CORRED. 6 FILAS. 100 L.2 MUELLE ESPEC. ZN GUA MICRO TUBO SOPORTE DEPSITO L 2480 T PLACA DE CONEXIN P PLACA DE CIERRE EJE DISTRIB.MICRO L.445 REGULADOR DE ABERTURA DISTRIB.NYLON COMPL.Y PLANO IN TORNILLO - ESCALA GRADUADA DOSIFICADOR MICRO COMPL.20 SEC EJE AGITADOR DEPS. MICRO 250 A KIT ENGRANAJES DISTRIB.MICRO ARAND. PLANA 4-3X 16X1-5 6593 ARANDELA 28X0-3X16-5 PERNO EN U SOP. DISCO SV EL.DE EMPALME M14X2X50 96X119 ELEMENTO DE EMPALME TORNILLO 14X180 5737 8.G TORNILLO 6X10 5739 8.G ZN TORNILLO M6X1X16 U5739 8.8 ZN TORNILLO 10X25 5739 8.G ZN TORNILLO 3,9X 9,5 DIN 7981 TORNILLO 3-9X 9-5 DIN 7982 TUERCA 6 UNI 5588 6.8 ZN TUERCA M10X 1,5 U5588 6.8 ZN DADO M14X2 TUERCA M10X 1,5 D980 8 ZN ARA.M14 15X 28X2,5 U6592 ZB PASADOR 3 X15 1336 ZN PASADOR 3 X20 1336 ZN PASADOR 4 X25 1336 ZN CLAVIJA EL.5 X24 DIN 1481 CLAVIJA EL. 5X 36 U6873 C70 BR

COLLIER DE SERRAGE 20/32 H.9 RESSORT SPEC. ZN SERRE-TUBE M8 RESSORT SPEC. ZN LANCOIR M80 ROTOR DOSEUR 8C MICRO SV DECALC. TABLEAU MICRO V 99 RESSORT COMPL. ZN RESERVOIR M8 ROUE DENTEE Z-24 M80 ROUE DENTEE TROU CARRE Z-24 M8 SUPPORT AVEC BRIDE M80 CORPS DISTRIBUTION M80 BAGUE REGLAGE M80 SUPPORT ENTRAINEMENT M80 COUVERCLE SUPPORT ENTRAINEM.

SCHELLE 20/32 H.9 SPEZIALFEDER ZN ROHRSCHELLE M8 SPEZIALFEDER ZN RUTSCHE M80 DOSIERER KOMPL. SV ABZIEHB. TABELLE MIKRO V 99 DRUCKFEDER ZN BEHZLTER M80 ZAHNRAD Z-24 M80 RAD VERZAHNT VIERKANTLOCH.Z-24 BsCHSE MIT FLANSCH M80 VERTEILUNGSKTRPER EINSTELLMUTTER M80 ANTRIEBSHALTERUNG M80 DECKEL ANTRIEBSHALTERUNGS M80

ABRAZADERA 20/32 H.9 MUELLE ESPEC. ZN APLASTA TUBOS MUELLE ESPEC. ZN PLANO INCLINA DOSIFICADOR COMPL. SV CAL.TABLA MICRO V 99 MUELLE COMP.ZN DEPS. M80 A RUEDA DENTADA Z-24 M80 RUEDA DENT.ORIFICIO CUAD.Z-24 CASQUILLO CON BRIDA M80 CUERPO DISTRIBUCIN M80 C CONTRATUERCA REGULACIN M80 G SOPORTE TRANSMISIN M80 S TAPA SOP. TRANSM. M80

cod. G19530932

TAV. 181 150x150 - 6 150x100 - 69

33 74 32

23 2 34

Standard - 46 Umostart - 68

47 31

28 38

8 - L. 2000 10 - L. 2480 70 - L. 2980 71 - L. 3980 72 - L. 5100 73 - L. 5800

57 32 4

26 31

37 60

31 35

30 49

13 36

31 35 27

26 12

61 - L. 250 62 - L. 440 63 - L. 470 64 - L. 550 65 - L. 690 66 - L. 1110 67 - L. 1620

43 52 42

16 15

17 51 56

19 (*)

24 33 45

25 - 150x100 58 - 150x150

(*) Kit ingranaggi cod. 20890211 (2+2 pezzi)

cod. G19530932

MICROGRANULATORE Pos.

Cod.

55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74

G66248154 G20970100 G66248223 F01020238 G15475560 G16675090 G20890205 G20890201 G20890111 G20890130 G20890202 G20890112 G20890203 G19702460 G16670241 G07000028 G07000370 G15475540 G15475400 G20970142

TAV. 181

Descrizione

Description

Benennung

Descripcion

SCIVOLO DISTR. M80 RONDELLA 30X0,5X22 ACC. TAPPO SUPP.SPAND.D.11 VITE M14X2X240 U5737 8.8 BR TAPPO TUBO 35X35 * TAPPO PLASTICA MICRO C/OR MANICOTTO UNIONE MICRO L.250 MANICOTTO UNIONE MICRO L.440 MANIC.UNIONE RINV.MICRO L.470 MANICOTTO UNIONE MICRO L.550 MANICOTTO UNIONE MICRO L.690 MANICOTTO UNIONE MICRO L.1110 MANICOTTO UNIONE MICRO L.1620 DECAL.TABELLA DISTRIB.UMOSTART TIRANTE BARRA MICRO SP TUBO Q. 35X 4X2980 TUBO Q. 35X 3X3980 TUBO SUPPORTO MICRO L.5100 TUBO SUPPORTO MICRO L.5800 RONDELLA 32X4X15,5

CHUTE- DISTRIB. M80 WASHER 30X0-5X22 ACC. PLUG MAN. SPR. SUPP. D.11 BOLT M 14 X240 5737 8.G PLUG PIPE 35X35

ENTONNOIR DOSEUR MINIMAX MICRO RONDELLE 30X0-5X22 ACIER BOUCHON SUPPORT EP. ENGRAIS D. VIS M 14 X240 5737 8.G BOUCHON TUBE 35X35

SAAPPARAT RUTSCHE M80 UNTERLEGSCHEIBE 30X0-5X22 ACC. HALTERUNGSPFROPFEN DsNGERSTR. SCHRAUBE M 14 X240 5737 8.G ROHRPFROPFEN 35X35

PLANO INCLINADO DISTR. M80 ARANDELA 30X0-5X22 ACC. TAPN SOPORTE ABON.D.11 D TORNILLO M 14 X240 5737 8.G TAP N TUBO 35X35

MICRO JOINT SLEEVE L.250 MICRO JOINT SLEEVE L.440 MICRO TRANSM.JOINT SLEEVE L.47 MICRO JOINT SLEEVE MICRO JOINT SLEEVE L.690 MICRO JOINT SLEEVE L.1110 MICRO JOINT SLEEVE L.1620 UMOSTART DISTRIBUTOR CHART STI

MANCHON RACCORD MICRO L. 250 VERBINDUNGSMUFFE MIKRO L.250 MANCHON RACCORD MICRO L. 440 VERBINDUNGSMUFFE MIKRO L.440 MANCHON RACCORD TRANSMISSION M VERBINDUNGSMUFFE VORGELEGE MIK MANCHON RACCORD MICRO L. 550 VERBINDUNGSMUFFE MIKRO L 550 MANCHON RACCORD MICRO L. 690 VERBINDUNGSMUFFE MIKRO L.690 MANCHON RACCORD MICRO L. 1110 VERBINDUNGSMUFFE MIKRO L1110 MANCHON RACCORD MICRO L. 1620 VERBINDUNGSMUFFE MIKRO L.1620 DECALC. TABLEAU DISTRIBUTEUR U ABZIEHB. TABELLE SZAPPARAT UMO

MANGUITO DE UNIN MICRO L.250 M MANGUITO DE UNIN MICRO L.440 M MANGUITO EMPALME TRANSM. MICRO MANGUITO DE UNIN MICRO L.550 M MANGUITO DE UNIN MICRO L.690 M MANGUITO DE UNIN MICRO L.1110M MANGUITO DE UNIN MICRO L.1620M CAL.TABLA DISTRIBUDOR UMOSTART

SQUARE PIPE 35 X 35 X 3 X 2980 SQUARE PIPE 35X35X4X3980 MICRO SUPPORT PIPE L.5100 MICRO SUPPORT PIPE L.3800 WASHER 32X4X15-5

TUBE CARRE 35 X 35 X 3 X 2980 TUBE CARRE 35X35X4X3980 TUBE SUPPORT MICRO L5100 TUBE SUPPORT MICRO L5800 RONDELLE 32X4X15-5

TUBO CUADRADO 35 X 35 X 3 X 29 TUBO CUADRADO 35X35X4X3980 TUBO SOPORTE MICRO L 51000 TUBO SOPORTE MICRO L.5800 ARANDELA 32X4X15-5

cod. G19530932

VIERKANTROHR 35 X 35 X 3 X 298 VIERKANTROHR 35X35X4X3980 ROHR HALTERUNG MIKRO L.5100 ROHR HALTERUNG MIKRO L.5800 UNTERLEGSCHEIBE 32X4X15-5

TAV. 191 21 10 6

7 31

37 12

27 14

29 32

16 17

45 29 46

19 29

7 34

32 19

22 - L. 300 54 - L. 120

1 52

45 1

49 39

51 14

50 56

20 14

26 1 18

55 - L. 800 18 45 19

cod. G19530932

TRASMISSIONE SPANDICONCIME E MICROGRANULATORE Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56

G14830390 F06080024 G15470851 G15475031 G15475041 G15475260 G15475310 G18902960 G19000091 G19002810 G19002820 G19002830 G19002880 G22505085 G20890128 G20970032 G20980086 G22230094 G20910039 G22250006 F20110706 G22270127 F01060047 F01020075 F01020083 F01020225 F01020403 G15875320 F01020436 F01070074 F01200232 F01200244 F01200270 F01410037 F01410051 F01410064 F01420011 F01430047 G15875310 F01100011 F06080056 F06080025 G66248152 G66248207 G66248218 F01420048 F02200452 G10538351 F01070073 G15110091 F01200306 F01200244 F01020432 G15870380 G22230142 G20970142

TAV. 191

Descrizione

Description

Benennung

Descripcion

CUSCINETTO FORO QUADRO CATENA 1/2 ISO 083 55 MAGLIE FIANCO SUPP.TRASM.SPANDI SUPPORTO TRASMISSIONE SX SUPPORTO TRASMISSIONE DX SCONTRO SP SUPPORTO RULLINI TENDIC. MICRO MOLLA TRAZ.TRASM.RUOTA ZN ROCCHETTO 2 META' CARTER RINVIO MICRO DX CARTER RINVIO MICRO SX CARTER TRASMISSIONE SUPERIORE CARTER INFERIORE TRASM.SPAND. FERMO ASSE IN LAMIERA CORONA Z-42 SP RONDELLA 32X4X8,5 BOCCOLA DIST.D.8,5X16X31 SUPPORTO CUSCINETTO INGRANAGGIO SUP.Z-20 FERRO * INGR.CON MOZZO 1/2 Z-10 SV CAV.Q.M10X 1,5X 30 47X 60 ZN ASSE RUOTA CAMBIO 2F.L.500 SP VITE M8X1,25X45 U5732 4.6 ZN VITE M8X1,25X 55 U5737 8.8 ZN VITE M 8X1,25X70 U5737 8.8 ZN VITE M14X2X160 U5737 8.8 BR VITE M6X1X16 U5739 8.8 ZN CARTER RINVIO VITE M 8X1,25X 20 U5739 8.8 ZN VITE M4,2X1,41X25 U6954 4.8NI DADO M 6X 1 U5588 6.8 ZN DADO M 8X1,25 U5588 6.8 ZN DADO M10X 1,5 U5588 6.8 ZN ROS.M6 6,4X12,5X1,6 U6592 ZN ROS.M8 8,4X 17X1,6 U6592 ZN ROS.M10 10,5X 20X 2 U6592 ZN ROS.M4 4,3X 16X 1 U6593 ZN ROS.M6 6,4X 11X0,7 U8842J ZN RINVIO TRASMISSIONE ING.M 6X1 7663-A 9SMNPB28 ZN SP.CAT.1/2-3/16 105M.ISO 083-1 CATENA 1/2 ISO 083 56 MAGLIE MOZZO TRASM.MICRO M80 TENDICATENA SPAND. SP-520 RONDELLA DISTAN.SPAND. ROS.M8 8,4X 24X 2 U6593 ZN SPINA SCATTO D.4,4 B/80 ZN CUSCINETTO F.Q. RIBASSATO VITE M4,2X1,41X9,5 U6954 4.8NI SCONTRO A U DADO M14X 2 U5588 6.8 ZN DADO M 8X1,25 U5588 6.8 ZN VITE M 8X1,25X16 U5739 8.8 ZN ASSE TRASM.L. 120 ASSE 4 FILE L.800 RONDELLA 32X4X15,5

SQUARE-HOLED BEARING CUT-DOWN CHAIN.1/2-3/16 55 SPREADER TRANSM. SIDE SUPPORT LEFT TRANSMISSION SUPPORT RIGHT TRANSMISSION SUPPORT STRIKER PLATE SP MICRO CHAIN STRETCHER ROLLERS TRANSMISSION TENSIONER SPRING CHAIN TENSIONER RIGHT MICRO TRANSM. CASE LEFT MICRO TRANSM. CASE TOP TRANSMISSION CASE BOTTOM SPREADER TRANSM. CASE PLATE AXLE STOP RING GEAR Z-42 SP WASHER 32X4X8-5 BUSHING SPAC.. D.8-5X16X31 BEARING SUPPORT

ROULEMENT AL+SAGE CARR+ TR. CH.1/2-3/16 55 MAILLES COTE SUPPORT TRANSM. EPAND. SUPPORT ENTRAINEMENT GCH SUPPORT ENTRAINEMENT DRT BUTEE SP SUPP. ROUETS TEND. CHAINE MICR RESSORT TRACT. ENTRAIN. ROUE Z TENDEUR DE CHAINE 2 MOITIE CARTER TRANSM. MICRO DRT CARTER TRANSM. MICRO GCH CARTER ENTRAINEMENT SUPERIEUR CARTER INFERIEUR TRANSM EPAND. ARRET AXE EN TOLE COURONNE Z-42 SP RONDELLE 32X4X8-5 BOITE ENTRETOISE D. 8-5X16X31 SUPPORT PALIER

VIERKANTLAGER KETTENLZNGE 1/2-3/16 55 GLIEDE SEITEN HALTER. ANTRIEB DUNGERS HALTERUNG GETRIEBE LI HALTERUNG GETRIEBE RE ANSCHLAG STREUER HALTERUNG KETTENSPANNROLLEN ZUGFEDER RADANTRIEB ZN KLEINRAD SPANNER SA VORGELEGEGEHZUSE MIKRO RE VORGELEGEGEHZUSE MIKRO LI OBERES ANTRIEBSGEHZUSE UNTER. ANTRIEBSGEHZUSE DsNG.GE FESTSTELLVORRICHTUNG BLECHACHS KRANZ Z-42 SP UNTERLEGSCHEIBE 32X4X8-5 VERTEILERBsCHSE D.8-5X16X31 LAGERBsCHSE

COJINETE ORIFICIO CUADRADO TRECHO CADENA 1/2-3/16 55 ESLA COSTADO SOPORTE TRANSM. ABONAD SOPORTE TRANSMISIN IZQ S SOPORTE TRANSMISIN DER S ELEMENTO DE EMPALME SP SOP. RODILLOS TENSOR CADENA MI MUELLE TRAC. TRANSM.RUEDA ZN CARRETE TENSOR SA CæRTER TRANSMISIN MICRO DER C CæRTER TRANSMISIN MICRO IZQ C CæRTER TRANSMISIN SUPERIOR C CæRTER INFER. TRANSMISIN ABONC BLOQUEO EJE DE CHAPA CORONA Z-42 SP ARANDELA 32X4X8-5 CASQUILLO DIST. D.8-5X16X31 SOPORTE COJINETE

GEARS- W/ HUB 1/2 Z-10 SV DISK SUPPORT.ELEMENT U BOLT SV WHEEL AXLE - GEARBOX 2-ROW L. BOLT 8X45 5732 4.6 GALVANIZED BOLT 8 X55 5737 8.8 GALVANIZED SCREW M8X1,25X70 U5737 8.8 ZN SCREW M 14 X160 5737 8.G SCREW M6X1X16 U5739 8.8 ZN INTERMEDIATE CASE SCREW M8X1,25X20 U5739 8.8 ZN BOLT 4-2X25 DIN 7981 NUT 6 UNI 5588 6.8 GALVANIZED NUT M8 X1,25 U5588 6.8 ZN NUT M10X 1,5 U5588 6.8 ZN PLANE WASHER D.6 WASHER M8 8,4X17X1,6 U6592 ZN WASHER M10 10,5X20X2 U6592 ZN FLAT WASHER 4-3X 16X1-5 6593 G WASHER D6 DIN 6798 D.INT.GALV. TRANSMISSION DRIVE ASS. GREASE NIPPLE M6X1 7663-A ZN

ENGRENAGE AVEC MOYEU 1/2 Z-10 CAVALIER SUPPORT DISQUE SV AXE ROUE BOITE DE VITESSE VIS 8X45 5732 4.6 ZN VIS 8 X55 5737 8.8 ZN VIS M 8X70 VIS M 14 X160 5737 8.G VIS M6X1X16 U5739 8.8 ZN CARTER TRANSMISSION VIS M8X1,25X20 U5739 8.8 ZN VIS 4-2X25 DIN 7981 ECROU 6 UNI 5588 6.8 ZN ECROU M8 X1,25 U5588 6.8 ZN ECROU M10X 1,5 U5588 6.8 ZN RONDELLE D.6 RONDEL. M8 8,4X17X1,6 U6592 ZN RONDELL.M10 10,5X20X2 U6592 ZN ROND.PLATE 4-3X 16X1-5 6593 ZN RONDELLE D6 DIN 6798 D. INT. Z GR. RENVOI TRANSMISSION GRAISS. A BILLE M6X1 7663A ZN

ZAHNRAD MIT NABE 1/2 Z-10 SV VERBINDUNG SCHEIBENHALTERUNG S GEBTRIEBERADACHSE 2R.L.500 SP SCHRAUBE 8X45 5732 4.6 ZN SCHRAUBE 8 X55 5737 8.8 ZN SCHRAUBE M 8X70 SCHRAUBE M 14 X160 5737 8.G SCHRAUBE M6X1X16 U5739 8.8 ZN VORGELEGEGEHZUSE SCHRA. M8X1,25X20 U5739 8.8 ZN SCHRAUBE 4-2X25 DIN 7981 MUTTER 6 UNI 5588 6.8 ZN MUTTER M8 X1,25 U5588 6.8 ZN MUTTER M10X 1,5 U5588 6.8 ZN SCHEIBE D.6 SCHEIBE M8 8,4X17X1,6 U6592 ZN SCHEIBE M10 10,5X20X2 U6592 ZN SCHEIBE 4-3X 16X1-5 6593 ZN UNT. SCHEIBE D6 DIN 6798 D. IN VORGELEGE ANTRIEB SCHMIERBUECHE M6X1 7663-A ZN

ENGRAN.CON PERNO 1/2 Z-10 SV PERNO EN U SOP. DISCO SV EJE RUEDA CAMBIO 2 FILAS. L.50 TORNILLO 8X45 5732 4.6 ZN TORNILLO 8 X55 5737 8.8 ZN TORNILLO M 8X70 TORNILLO M 14 X160 5737 8.G TORNILLO M6X1X16 U5739 8.8 ZN CµRTER TRANSMISIN TORN. M8X1,25X20 U5739 8.8 ZN TORNILLO 4-2X25 DIN 7981 TUERCA 6 UNI 5588 6.8 ZN TUERCA M8 X1,25 U5588 6.8 ZN TUERCA M10X 1,5 U5588 6.8 ZN ARANDELA D.6 ARANDELA M8 8,4X17X1,6 U6592ZN ARAND. M10 10,5X20X2 U6592 ZN ARAND. PLANA 4-3X 16X1-5 6593 ARANDELA D6 DIN 6798 D.INT.ZN CONJ. REENV-O TRANSMISI-N ENGRAS. DE ESFERAS M6X1 7663-A

CHAIN 1/2-3/16 56 LINKS. HUB - TRANSM. MICRO M80 CHAIN TENSIONER MAN. SPR. SPACER WASHER WASHER M8 8,4X 24X 2 U6593 ZN SNAP PIN D4,4 B/80 ZN SQUARE HOLE BEARING BOLT 4-2X 9-5 DIN 7981 STRIKER NUT M14X2 NUT M8 X1,25 U5588 6.8 ZN SCREW M8X 1.25X16 U5739 8.8 ZN TRANSMISSION AXLE L120 4-ROW SPINDLE L.800 WASHER 32X4X15-5

CHAINE 1/2-3/16 56 MAILLES MOYEU ENTRAINEMENT MICRO M80 TENDEUR DE CHAINE EPAND. ENGR. RONDELLE ENTRETOISE EP. ENGRAI RONDELLE M8 8,4X 24X2 U6593 ZN FICHE A DETENTE D4,4 B/80 ZN PALIER TROU CARRE VIS 4-2X 9-5 DIN 7981 BRIDE 150 MM ECROU M14X2 ECROU M8 X1,25 U5588 6.8 ZN VIS M 8X16 AXE TRANSMISSION L.120 AXE 4 RANGEES L. 800 RONDELLE 32X4X15-5

KETTE 1/2-3/16 56 GLIEDER ANTRIEBSNABE MIKRO M80 KETTENSPANNER DsNGERSTR. SP-52 ABSTANDSCHEIBE DsNGERSTREUER SCHEIBE M8 8,4X 24X 2 U6593 ZN EINRASTSTIFT D4,4 B/80 ZN LAGER VIERKANTLOCH SCHRAUBE 4-2X 9,5 DIN 7981 ANSCHLAG MUTTER M14X2 MUTTER M8 X1,25 U5588 6.8 ZN SCHRAUBE M 8X16 sBERTRAGUNGSACHSE L.120 ACHSE 4 REIHEN B. 800 UNTERLEGSCHEIBE 32X4X15-5

CADENA 1/2-3/16 56 ESLABNE CUBO TRANSM. MICRO M80 TENSOR DE CADENA ABON. SP-520 ARANDELA DISTAN.ABONAD. ARANDELA M8 8,4X 24X2 U6593 ZN CLAVIJA DE MUELLE D4,4 B/80 ZN COJINETE ORIFICIO CUADRADO TORNILLO 4-2X 9-5 DIN 7981 ELEMENTO DE EMPALME DADO M14X2 TUERCA M8 X1,25 U5588 6.8 ZN TORNILLO M 8X16 EJE TRANSMISIN L 120 A EJE 4 FILAS L.800 ARANDELA 32X4X15-5

cod. G19530932

TAV. 201

48 21

20 46

38 43 (

75 precisare m)

12 42

36 33

6 29 1

30 36

( 22

35 precisare m) 44

Rosso / Red - 54 51 11

4 37

32 30

M4 - 53 M6 - 18

9 42 8

40 57

40 41

M6x30 - 52 M4x12 - 59 M6x12 - 58 M6x25 - 17

24 31

cod. G19530932

CONCIMAZIONE PNEUMATICA Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59

G13912101 G13912131 G13912350 G13912460 G13912470 G13912512 G15450390 G15450401 G15450410 G15450420 G15450431 G15470410 G15470420 G15471471 G18901960 G18902650 F01020406 F01220011 G22230264 G23440551 G23440553 G23440562 G23440563 G23440564 F01020048 F01020404 F01020445 F01020472 F01020476 F01030054 F01080044 F01230048 F01200232 F01200244 F01200270 F01410037 F01410064 F01420048 F01430047 F04010165 F02050078 F02150036 F03100367 F03100500 F02300023 F02300018 F05150060 G66248098 F03150664 F06220034 G67320001 F01020037 F01230016 G58162014 G15473770 F01440012 F02050370 F01020398 F01020362

TAV. 201

Descrizione

Description

Benennung

Descripcion

UGELLO CONCIMAZIONE PNEUMATICA TUBO CONCIMAZIONE PNEUMATICA FASCETTA VASO ESPANSIONE COPRIVENTOLA LATO SCHIENALE COPRIVENTOLA LATO MOTORE VASO ESPANSORE D.35-50 PULEGGIA CONDOTTA PUL.CONDOTTA CONCIM.PNEUM. RONDELLA X GIUNTO ELASTICO GIUNTO ELAS.ROTEX19 95/98SHORE FLANGIA SUPP.CONC.PNEUM. RINFORZO ANTERIORE RINFORZO POSTERIORE SUPPORTO CONVOGLIATORE GUIDATUBI PER 3 TUBI MOLLA SUPP.VASO ESPANSIONE VITE M6X1X25 U5739 8.8 ZN DADO M 6X 1 D980 8 ZN RONDELLA TUBI DEPR. FLANGIA CONVOGLIATORE HL/ID CONVOGLIATORE D.35 HL/ID DISTANZ.GUSCI SOFFIANTE HL/ID GRIGLIA DI PROTEZIONE HL/ID COPERCHIO CHIUSURA SOFF. HL/ID VITE M6X1X75 U5737 8.8 ZN VITE M6X1X20 U5739 8.8 ZN VITE M8X1,25X30 U5739 8.8 ZN VITE M10X1,5X25 U5739 8.8 ZN VITE M10X1,5X30 U5739 8.8 ZN VITE M 8X1,25X16 U5933 10.9 ZD VITE M5X0,8X14 U7688 4 8 ZN DADO M10X 1,5 D982 8 ZN DADO M 6X 1 U5588 6.8 ZN DADO M 8X1,25 U5588 6.8 ZN DADO M10X 1,5 U5588 6.8 ZN ROS.M6 6,4X12,5X1,6 U6592 ZN ROS.M10 10,5X 20X 2 U6592 ZN ROS.M8 8,4X 24X 2 U6593 ZN ROS.M6 6,4X 11X0,7 U8842J ZN CUSC.D20 D47 B14 6204,2RSC3 ANELLO E. DE 20X 1,2 U7435 C70 LINGUETTA 6X 6X 20 U6604A TUBO VULCANO PU R 76 TUBO EOLO 35 PU FASCETTA STRING. 80/100 H.8 FASCETTA STRING. 25/40 H.8 FASCETTA POLYAMIDE 9X380 31919 TAPPO CONVOGLIATORE DEPR. SP TAPPO MASCHIO 1/8 ESAGONO VOLANTINO M5 X 25 VPA/25 VENTOLA PLASTICA DISCO L80M8 VITE M6X1X30 U5737 8.8 ZN DADO M 4X 0,7 D982 8 ZN ELEM.ELAS.ROTEX 19 95/98 SHORE SOFFIANTE CONC.PNEUM.COMPL. ROS. 20X28X 2 D988 IX ANELLO E. DI 47X1,75 U7437 C70 VITE M6X1X12 U5739 8.8 ZN VITE M4X0,7X12 U5739 8.8 ZN

PNEUMATIC FERTIL. NOZZLE PIPE PNEUMATIC FERTILISATION EXPANSION CHAMBER CLAMP BACK FAN PROTECTION MOTOR FAN PROTECTION D.35-50 EXPANSION TANK DRIVEN PULLEY D.28

BUSE FUMAGE PNEUMATIQUE TUBE FUMAGE PNEUMATIQUE COLLIER VASE EXPANSION PROTECTION ROTOR DOSSIER PROTECTION ROTOR MOTEUR VASE EXPANSION D.35-50 POULIE ENTRAINEE D. 28

DsSE PNEUMATISCHE DsNGUNG ROHR PNEUMATISCHE DsNGUNG SCHELLE EXPANSIONSGEFZSS RUECKENLAUFRADSCHUTZ MOTORLAUFRADSCHUTZ EXPANSIONSGEFZSS D.35-50 GETRIEBENE SCHEIBE D.28

BOQUILLA DE ABONO NEUMATICA TUBO DE ABONO NEUMAT. ABRAZADERA DEPSITO DE EXPANSIC PROTECCIN VENTILADOR RESPALDOP PROTECCIN VENTILADOR MOTOR P DEPSITO DE EXPANSIN D.35-50 POLEA CONDUCIDA D.28

LOCK WASHER LOCK COUPLING FLANGE SUPPORT FRONT REINFORCEMENT REAR REINFORCEMENT CONVEYOR SUPPORT PIPE GUIDE FOR 3 PIPES EXPANSION TANK SUPPORT SPRING SCREW M6X 1X 25 U5739 8.8 ZN NUT M6X1 D980 8 ZN AIR PUMP PIPE WASHER CONVEYOR FLANGE HL/ID CONVEYOR- D.35 HL/ID BLOWER SHELL SPACER HL/ID PROTECT. GRID HL/ID BLOWER CLOSING COVER . HL/ID SCREW M6X 1X75 U5737 8.8 ZN SCREW M 6X 1X20 U5739 8.8 ZN BOLT M 8X30 BOLT 10X25 5739 8.G GALVANIZED SCREW M10X1,5 X 30 5739 8.8 ZN BOLT 8X16 UNI5933 10.9 GALVANI BOLT 5 X14 7688 GALVANIZED NUT M10X 1,5 D982 8 ZN NUT 6 UNI 5588 6.8 GALVANIZED NUT M8 X1,25 U5588 6.8 ZN NUT M10X 1,5 U5588 6.8 ZN PLANE WASHER D.6 WASHER M10 10,5X20X2 U6592 ZN WASHER M8 8,4X 24X 2 U6593 ZN WASHER D6 DIN 6798 D.INT.GALV. BEARING D20 D47 B14 6204 2RSC3 SEEGER RING E. 20X1,2 7435 C70 PARALLEL KEY 6X 6X 20 U6604A FLEXIBLE PVC PIPE R 76 TUBE EOLO 35 PU PIPE CLAMP 80/100 H.8 CABLE TIE 25/40 H.8 POLYAMIDE FASTENING STRAPS 9X3 AIR PUMP CONVEYOR PLUG SP 1/8 MALE HEXAGON. PLUG HANDWHEEL M5 X 25 VPA/25 PLASTIC FAN- DISK L80M8 BOLT M6X 1X 30 U5737 8.8 ZN NORM.SELF-LOCKING NUT 4 GALVAN ELASTIC ELEMENT OF JOINT 24.24 COMPL. FERTILIZER PNEUMATIC BL WASHER 20X28X2 DIN 988 SEEGER RING 47X 1,75 U7437 C70 BOLT M 6X12 SCREW 4X12 5739 8.G GALVANIZED

RONDELLE DE BLOCAGE JOINT DE BLOCAGE BRIDE SUPPORT RENFORCEMENT AVANT RENFORCEMENT ARRIERE SUPPORT CONVOYEUR GUIDE-TUBES POUR 3 TUBES RESSORT SUPP. VAS EXPANSION VIS M 6X25 ECROU M6X1 D980 8 ZN RONDELLE TUBES DISPOSITIF DE D BRIDE CONVOYEUR HL/ID CONVOYEUR D. 35 HL/ID ENTRETOISE COQUES SOUFFLANTE H GRILLE DE PROTECTION HL/ID COUVERCLE FERMETURE SOUFFL. HL VIS 6 X75 5737 8.G ZN VIS 6X20 5739 8.G ZN VIS M 8X30 VIS 10X25 5739 8.G ZN VIS M10X1,5 X 30 5739 8.8 ZN VIS 8X16 UNI 5933 10.9 ZN VIS 5 X14 7688 ZN ECROU M10X 1,5 D982 8 ZN ECROU 6 UNI 5588 6.8 ZN ECROU M8 X1,25 U5588 6.8 ZN ECROU M10X 1,5 U5588 6.8 ZN RONDELLE D.6 RONDELL.M10 10,5X20X2 U6592 ZN RONDELLE M8 8,4X 24X2 U6593 ZN RONDELLE D6 DIN 6798 D. INT. Z PALIER 6204 2RS SEEGER 20X 1,2 U7435 C70 LANGUETTE 06X6X20 UNI6604 TUBE FLEXIBLE PVC R 76 TUBE EOLO 35 PU COLLIER DE SERRAGE 77/95 COLLIER DE SERRAGE 25/40 H.8 COLLIER POLYAMIDE 9X350 31919 BOUCHON CONVOYEUR TURBINE SP BOUCHON MALE 1/8 HEXAGONAL VOLANT M5 X 25 VPA/25 ROTOR PLASTIQUE DISQUE L80M8 VIS M6X 1X 30 U5737 8.8 ZN ECROU AUTOB.NOR.4 ZN ELEM. ELASTIQUE DU JOINT 24.24 SOUFFLEUR ENGRAIS PNEUMATIQUE RONDELLE 20X28X2 DIN 988 SEEGER E. 47X 1,75 U7437 C70 VIS M 6X12 VIS 4X12 5739 8.G ZN

SPERRSCHEIBE ARANDELA DE BLOQUEO SPERRKUPPLUNG JUNTA DE BLOQUEO LAGERFLANSCH BRIDA DE SOPORTE VORDERE VERSTZRKUNG REFUERZO DELANTERO HINTERE VERSTZRKUNG REFUERZO TRASERO HALTERUNG FTRDERER SOPORTE TRANSPORTADOR ROHRFsHRUNG FsR 3 ROHRE GUA TUBOS PARA 3 TUBOS G OB. FEDER EXPANSIONSGEFZSS MUELLE SOP. DEPSITO DE EXPANSA SCHRAUBE M 6X25 TORNILLO M 6X25 MUTTER M6X1 D980 8 ZN TUERCA M6X1 D980 8 ZN UNTERLEGSCHEIBE VAKUUMPUMPENRO ARANDELA TUBOS BOMBA VACO. S FLANSCH FTRDERER HL/ID BRIDA CONDUCTOR HL/ID FTRDERER D.35 HL/ID CONDUCTOR D.35 HL/ID DISTANZSTsCK SCHALEN GELBZSE H DISTANC. CASCARAS SOPLAD. HL/I SCHUTZGITTER HL/ID REJILLA DE PROTECCIN HL/ID G ABSCHLUSSDECKEL GEBL. HL/ID TAPA CIERRE SOPL. HL/ID SCHRAUBE 6 X75 5737 8.G ZN TORNILLO 6x75 5737 8.G ZN SCHRAUBE 6X20 5739 8.G ZN TORNILLO 6X20 5739 8.G ZN SCHRAUBE M 8X30 TORNILLO M 8X30 SCHRAUBE 10X25 5739 8.G ZN TORNILLO 10X25 5739 8.G ZN SCHRA. M10X1,5X 30 5739 8.8 ZN TORN. M10X1,5 X 30 5739 8.8 ZN SCHRAUBE 8X16 UNI 5933 10.9 ZN TORNILLO 8X16 UNI 5933 10.9 ZN SCHRAUBE 5 X14 7688 ZN TORNILLO 5 X14 7688 ZN SCHEIBE M10X 1,5 D982 8 ZN TUERCA M10X 1,5 D982 8 ZN MUTTER 6 UNI 5588 6.8 ZN TUERCA 6 UNI 5588 6.8 ZN MUTTER M8 X1,25 U5588 6.8 ZN TUERCA M8 X1,25 U5588 6.8 ZN MUTTER M10X 1,5 U5588 6.8 ZN TUERCA M10X 1,5 U5588 6.8 ZN SCHEIBE D.6 ARANDELA D.6 SCHEIBE M10 10,5X20X2 U6592 ZN ARAND. M10 10,5X20X2 U6592 ZN SCHEIBE M8 8,4X 24X 2 U6593 ZN ARANDELA M8 8,4X 24X2 U6593 ZN UNT. SCHEIBE D6 DIN 6798 D. IN ARANDELA D6 DIN 6798 D.INT.ZN LAGER 6204 2RS COJINETE 6204 2RS SEEGER E. 20X 1,2 U7435 C70 FEDERKEIL 06X6X20 UNI6604 LENGsETA 06X6X20 UNI6604 76 SCHLAUCH PVC TUBO FLEXIBLE PVC R 76

cod. G19530932

ROHRSCHELLE 80/100 H.8 SCHELLE 25/40 H.8 SCHELLE POLYAMID 9X350 31919 VAKUUM FTRDERPFROPFEN SP GEWINDEPFROPFEN 1/8 SECHSKANT HANDRAD M5 X 25 VPA/25 SCHEIBE PLASTIKRAD L80M8 SCHRAUBE M6 X30 5737 8.G ZN SELBSTSP. MUTTER NOR. 4 ZN ELAST. KUPPLUNGSELEM. 24.24 PNEUMATISCHES GEBLZSE KOMPL. UNTERLEGSCHEIBE 20X28X2 DIN 98 SEEGERING E. 47X1,75 U7437 C70 SCHRAUBE M 6X12 SCHRAUBE 4X12 5739 8.G ZN

ABRAZADERA P. MANGUERA 80/100 ABRAZADERA 25/40 H.8 ABRAZADERA POLIAMIDA 9X350 319 TAPN CONDUCTOR DEPR. SP D TAPN MACHO 1/8 HEXæGONO D VOLANTE M5 X 25 VPA/25 VENTILADOR PLæSTICO DISCO L80M TORNILLO M6X 1X30 U5737 8.8 ZN TUERCA AUTOB. NOR. 4 ZN ELEM.ELÁSTICO DEL ACOPLAMIENTO SOPLADOR ABONO NEUM-TICO COMPL ARANDELA 20X28X2 DIN 988 ANILLO E. 47X 1,75 U7437 C70 TORNILLO M 6X12 TORNILLO 4X12 5739 8.G ZN

TAV. 210 10 10 9

9 12

DX 11

12 14 1

19 20

L. 780 - 8 L. 1030 - 33 L. 1230 - 34 L. 1430 - 35 37

22 29

SP - 23 SF - 36

7 - SP 32 - SF

28 SP = serbatoio plastica / plastic hopper SF = serbatoio ferro / metal hopper

25 27

cod. G19530932

REGOLAZIONE CENTRALIZZATA SPANDICONCIME (SPEEDY SET) Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37

F02100066 G19003660 F01070061 F01050083 G19705101 G19003680 G16670040 G16670320 F01420038 F01200233 G19003670 F01020419 G65336055 G19003720 G16670310 G19003690 F01080032 G16670100 G19003700 G66248173 G66248172 G66248211 G19002920 G18701500 G20860126 F01070075 G20970097 G66248178 G65336062 G19002850 F01070011 G13722330 G16670330 G16670340 G16670350 G66248176 G19003710

Descrizione SPINA E.P. 4X 36 U6873 C70 BR SUPPORTO VITE M3,9X1,34X9,5 U6954 4.8NI VITE M5X0,8X12 U5927 A2 IX DECAL.SPANDIC.CON SPEEDYSET INGRANAGGIO Z.15 DISTR.COMPL.8PALE SPEEDY SET P TONDO D.10X780 ROS.M6 6,4X 18X 2 U6593 IX DADO M 6X 1 U5588 A2 IX MANOPOLA SPEEDY SET VITE M 6X1 X 16 U5739 A2 IX MOLLA SPEC.REGOL.SPAND. SP GHIERA REGOLAZIONE SX SUPPORTO MOLLA REGOLATORE CREMAGLIERA VITE M4X0,7X10 U7688 A2 IX REGOLATORE APERTURA COPERCHIO SPEEDY SET ASSE DISTR.SPAND. SP DOSATORE DISTR.SPAND. SP PERNO RONDELLA FUSA SPAND. SP CORPO DISTRIBUTORE SPANDI PLA. RONDELLA 29,5 X38 X0,3 KIT INGR DISTR CONCIME (2+2) VITE M4,2X1,41X38 U6954 4.8 NI RONDELLA 32X3X4,5 SCIVOLO DISTR.SPAND. SP MOLLA SPEC.SCIV.DISTR.SPAND.SP PROTEZIONE PIGNONE VITE M4,2X1,41X9,5 U6950 4.8NI DISTR.COMPL.8PALE SPEEDY SET F TONDO D.10X1030 TONDO D.10X1230 TONDO D.10X1430 CORPO DISTR.SPAND. SP GHIERA REGOLAZIONE DX

cod. G19530932

Description

TAV. 210 Benennung

Descripcion

SUPPORT BOLT 3,9X 9,5 DIN 7981 GRUB-SCREW5X12 UNI 5927

SUPPORT VIS 3,9X 9,5 DIN 7981 GOUJON 5X12 UNI 5927

HALTERUNG SCHRAUBE 3,9X 9,5 DIN 7981 STIFT 5X12 UNI 5927

0 SOPORTE TORNILLO 3,9X 9,5 DIN 7981 TORNILLO SIN CABEZA 5X12 5927

GEAR Z 15 COMPL.PLA.SPEEDY SET DISTR.8R D.10X780 ROUND WASHER M6 6,4X18X2 U6593 IX NUT M 6X 1 U5588 IX SPEEDY HANDLE SET BOLT M6 X1 X 16 U5739 8.8 IX SPEC SPRING MAN. SPR. ADJUSTM. LEFT ADJUSTMENT KNURLED NUT

ENGRENAGE Z 15 MINIMAX COMPL 8C PLA SPEEDYSET ROND D.10X780 RONDELLE M6 6,4X18X2 U6593 IX ECROU M 6X 1 U5588 I POIGN+E SPEEDY SET VIS M6 X1 X 16 U5739 8.8 IX RESSORT SPEC. REGL. EP. ENTRAI MANCHON DE REGLAGE GCH

ZAHNRAD Z 15 KOMPL.DOSIER.SPEEDY SET PLA.8S RUNDEISEN D.10X780 SCHEIBE M6 6,4X18X2 U6593 IX MUTTER M 6X 1 U5588 GRIFF SPEEDY SET SCHRAUBE M6 X1 X 16 U5739 8. SPEZIALFEDER STREUEREINSTELLUN EINSTELLMUTTER LINKS

ENGRANAJE Z 15 DISTR.COMP.SPEEDY SET PLA.8AL. BARRA REDONDA D. 10X780 ARANDELA M6 6,4X18X2 U6593 IX TUERCA M 6X 1 U5588 EMPUÐADURA SPEEDY SET TORNIL. M6 X1 X 16 U5739 8.8 MUELLE ESPEC. REGUL. ABONADORA ROSCA REGULACION IZQUIERDA

RACK SCREW M4X 0,7X10 U7688 A2 IX OPENING REGULATOR COVER SPEEDY SET MANURE SPREADER DISTR. SPINDLE MAN.SPR. SEED METERING DEVICE MAN. SPR. CAST WASHER PIN. SP PLA. F.SPREADER DISTRIB.CASING WASHER 29,5 X 38 X 0,3 KIT- MAN. DISTR. GEARS (2+2) BOLT 4-2X38 DIN 7981 WASHER 32X3X4-5 CHUTE- MANURE-SPREADER DISTRIB SPEC SPRING - MAN. SPR. DISTR. PINION GUARD BOLT- SELF-TAPPING 4-2X9-5T.E. COMPL.SPEEDY 8-BLADE DISTR. SE D.10X1030 ROUND D.10X1230 ROUND D.10X1430 ROUND MANURE SPREADER DISTR. CASING RIGHT ADJUSTMENT KNURLED

CR+MAILL+RE VIS M4X 0,7X10 U7688 A2 IX REGULATEUR OUVERTURE COUVERCLE SPEEDY SET AXE DISTRIBUTEUR EP.ENGRAIS SP DOSEUR DISTRIBUTEUR EP. ENGRAI PIVOT RONDELLE MOULEE EP. ENGR CORPS DISTRIBUTEUR EPAND. RONDELLE 29,5 X38 X0,3 COUPLE CON DISTR ENGRAIS (2+2) VIS 4-2X38 DIN 7981 RONDELLE 32X3X4-5 LANCOIR DISTRIBUTION EP. ENGR. RESS. SPEC. LANCOIR DISTR. EP. PROTECTION PIGNON VIS AUTOTAR. 4-2X9-5 T. E. COU DISTR.COMPL.8PALETTES SPEEDY S ROND D.10X1030 ROND D.10X1230 ROND D.10X1430 CORPS DISTRIB. EP. ENGRAIS SP BAGUE REGLAGE DROITE

ZAHNSTANGE SCHRAUBE M4X 0,7X10 7688 A2 IX TFFNUNGSEINSTELLER DECKEL SPEEDY SET ACHSE SZAPPARAT STREUER SP DOSIERER DsNGERSTREUER. SP ZAPFEN LOSE UNTERLEGSCHEIBE ST VERTEILUNGSKTRPER STREUER PLA. UNTERLEGSCHEIBE 29,5X38X0,3 KIT ZAHNRZDER DsNGERSTREUER SCHRAUBE 4-2X38 DIN 7981 UNTERLEGSCHEIBE 32X3X4-5 DsNGERSTREUER RUTSCHE SP SPEZ.FEDER RUTSCHE SZAPP. STRE RITZELSCHUTZ SELBSTSCHNEID. SCHRAUBE 4-2X9SAATGUTAUS.8SCH.KOMPL.SPEEDY S RUNDEISEN D.10X1030 RUNDEISEN D.10X1230 RUNDEISEN D.10X1430 VERTEILUNGSKTRPER STREUER SP EINSTELLMUTTER RE

CREMALLERA TORNILLO M4X0.7X10 U7688 A2 IX REGULADOR ABERTURA TAPA SPEEDY SET EJE DISTR. ABON. SP DOSIFICADOR DISTR.ABON. SP PERNO ARANDELA FUNDIDA ABONAD CUERPO DIST. ABONADORA PLæS. ARANDELA 29,5 X38 X0,3 SET ENGRANAJES DISTRIB. ABONO TORNILLO 4-2X38 DIN 7981 ARANDELA 32X3X4-5 PLANO INCLINADO DISTR. ABON. S MUELLE ESPEC.PLANO INCL.DISTR. PROTECCIN PI¾N PR TORNILLO AUTORROSC. 4-2X9-5 DISTR.COMPL.8PALETAS SPEEDY SE BARRA REDONDA D. 10X1030 BARRA REDONDA D. 10X1230 BARRA REDONDA D. 10X1430 CUERPO DISTR. ABON. SP CONTRATUERCA REGULACIN DER.

TAV. 221

1047

.5 mm

30 31

26 27

21 - L. 1900 22 - L. 2480

2 1

4 5 6 7 - L. 1500 25 - L. 1800

L. 1500 - 23 L. 1800 - 24

2 3

6 5 9 12 11 5 9 10

20 19 18 17

16 15 14 13

cod. G19530932

RULLO ANTERIORE Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

G15816370 F01200306 F01410088 F01020470 F01430023 G20970099 G15810410 G15810330 F01020476 F04100137 F02050101 G15810471 F02200397 G15810240 G15816380 F04150019 F01020198 G15810190 F01020223 F02200463 G16610040 G16610050 G15810310 G15810870 G15810890 GA5820340 F20110770 F20110706 F01200270 F01200306 G20970142

TAV. 221

Descrizione

Description

Benennung

Descripcion

DISTANZIALE TELAIO DADO M14X 2 U5588 6.8 ZN ROS.M14 15X 28X2,5 U6592 ZN VITE M10X1,5X20 U5739 8.8 ZN ROS.M10 10,5X 18X0,9 U8842J ZN RONDELLA 38X4X11 * RASCHIATERRA PER RULLO 1500 SUPPORTO RASCH.RULLO 355 VITE M10X1,5X30 U5739 8.8 ZN SUPPORTO FY 25 TF ANELLO E. DE 25X 1,2 U7435 C70 ASS.PERNO BLOCCAGGIO RULLO ZN COPIGLIA R 5X100 ZN BRACCIO SUPPORTO RULLO ATTACCO RULLO BOCCOLA FLANG.25 X 28 X 20 > VITE M14X2X45 U5737 8.8 ZN SUPPORTO RULLO VITE M14X2X150 U5737 8.8 BR SPINA SCATTO D. 5 B/81 ZN TUBO RET.150X100X1900 TUBO R.150X100X2480 RULLO 355X1500 RULLO D.355X1800 RASCHIATERRA PER RULLO 1800 TIRANTE BARRA MICRO RULLO ANT. CAV.Q.M14X 2X 50 96X119 ZN CAV.Q.M10X 1,5X 30 47X 60 ZN DADO M10X 1,5 U5588 6.8 ZN DADO M14X 2 U5588 6.8 ZN RONDELLA 32X4X15,5

FRAME SPACER ASS. NUT M14X2 WAS.M14 15X 28X2,5 U6592 ZB BOLT M 10X20 WASHER D10 DIN 6798 D.INT.ZN WASHER 38X4X11 SOIL SCRAPER FOR ROLLER 1500 ROLLER 355 SOIL SCRAPER SUPPOR SCREW M10X1,5 X 30 5739 8.8 ZN SUPPORT FY 25 TF SEEGER RING E. 25X1,2 7435 C70 GALVAN. PIN BLOCK ROLLER SPRING SPLIT PIN 5X100 ZN ROLLER SUPPORT ARM COUPLING ROLLER COUPLING ASS. COLLARED BUSH 25 X 28 X 20 SCREW M14X2X45 U5737 8.8 ZN ROLLER SUPPORT ASS. SCREW 14X150 5737 8.G SNAP PIN D5 B/81 ZN RECTANGULAR PIPE 150X100X1900 RECTANGULAR PIPE 150X100X2480 ROLLER 355X1500 ASS. ROLLER 355X1500 ASS. SOIL SCRAPER FOR ROLLER 1800

GR. ENTRETOISE BATI ECROU M14X2 RON.M14 15X 28X2,5 U6592 ZB VIS M 10X20 RONDELLE D10 DIN 6798 D. INT. RONDELLE 38X4X11 RACLEUR ROULEAU 1500 SUPPORT RACLEUR ROULEAU 355 VIS M10X1,5 X 30 5739 8.8 ZN

DISTANZSTsCK RAHMEN MUTTER M14X2 SCH.M14 15X 28X2,5 U6592 ZB SCHRAUBE M 10X20 UNT. SCHEIBE D10 DIN 6798 D.IN UNTERLEGSCHEIBE 38X4X11 ERDSHABER ROLLE 1500 HALTERUNG ERDSCHABER ROLLE 355 SCHRA. M10X1,5X 30 5739 8.8 ZN

CONJ. DISTANCIADOR BASTIDOR DADO M14X2 ARA.M14 15X 28X2,5 U6592 ZB TORNILLO M 10X20 ARANDELA D10 DIN 6798 D.INT.ZN ARANDELA 38X4X11 RASCADOR DE TIERRA POR RODILLO SOPORTE RASCADOR TIERRA RODILL TORN. M10X1,5 X 30 5739 8.8 ZN

SEEGER E. 25X 1,2 U7435 C70 PIVOT BLOCAGE ROULEAU ZN GOUPILLE R 5X100 ZN GR. BRAS SUPPORT ROULEAU GR. FIXATION ROULEAU BOITE COLLIER 25 X 28 X 20 VIS 14X45 5737 8.G ZN * GR. SUPPORT ROULEAU VIS 14X150 5737 8.G FICHE A DETENTE D5 B/81 ZN TUBE RECTANGULAIRE 150X100X190 TUBE RECT.150X100X6X2480 GR. ROULEAU 355X1500 GR. ROULEAU 355X1800 RACLEUR ROULEAU 1800

SEEGERING E. 25X 1,2 U7435 C70 ZAPFEN ROLLEBLOCK ZN SPLINT R 5X100 ZN WALZENHALTERUNGSARM KUPPLUNG ROLLE ANSCHLUSSBUECHSE 25 X 28 X 20 SCHRAUBE 14X45 5737 8.G ZN * HALTERUNG ROLLE SCHRAUBE 14X150 5737 8.G EINRASTSTIFT D5 B/81 ZN RECHTECK.ROHR150X100X1900 R. ROHR150X100X6X2480 ROLLE 355X1500 ROLLE 355X1800 ERDSHABER ROLLE 1800

ANILLO E. 25X 1,2 U7435 C70 PERNO BLOQUE RODILLO ZN CLAVIJA R 5X100 ZN CONJ. BRAZO SOP. RODILLO CONJ. CONEXIN RODILLO CASQUILLO CONEX. 25 X 28 X 20 TORNILLO 14X45 5737 8.G ZN * CONJ. SOP. RODILLO TORNILLO 14X150 5737 8.G CLAVIJA DE MUELLE D5 B/81 ZN TUBO RECT.150X100X1900 TUBO RECT.150X100X6X2480 CONJ. RODILLO 355X1500 CONJ. RODILLO 355X1800 RASCADOR DE TIERRA POR RODILLO

U BOLT M14X2X50 96X119 ZN DISK SUPPORT.ELEMENT U BOLT SV NUT M10X 1,5 U5588 6.8 ZN NUT M14X2 WASHER 32X4X15-5

BRIDE U M14X2X50 96X119 ZN CAVALIER SUPPORT DISQUE SV ECROU M10X 1,5 U5588 6.8 ZN ECROU M14X2 RONDELLE 32X4X15-5

ANSCHLANG U M14X2X50 96X119 ZN VERBINDUNG SCHEIBENHALTERUNG S MUTTER M10X 1,5 U5588 6.8 ZN MUTTER M14X2 UNTERLEGSCHEIBE 32X4X15-5

EL.DE EMPALME M14X2X50 96X119 PERNO EN U SOP. DISCO SV TUERCA M10X 1,5 U5588 6.8 ZN DADO M14X2 ARANDELA 32X4X15-5

cod. G19530932

TAV. 251

11 - Red / Yellow (564x282) (pair of warning boards) 2

15 - Red / White (423x423) (pair of warning boards)

9 7

3 10

(423x282) Red / White - 16 (pair of warning boards)

13 DECALCOMANIE AVVERTIMENTO DECAL DBZIEHBILD DECALCOMANIE CALCOMANIE CALCOMANIE

14 Rosso Gaspardo - 1Kg Gaspardo red - 1Kg Rot Gaspardo - 1Kg Rouge Gaspardo - 1Kg Rojo Gaspardo - 1Kg

ORIETTA OLIMPIA

cod. G19530932

ACCESSORI Pos.

Cod.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

F01020408 F01020479 F01200270 F01220011 F01410037 F01410064 F05010076 F05010221 G13616570 G15817130 F05010357 G89900515 G89900500 F03200253 F05010590 F05010591

TAV. 251

Descrizione

Description

Benennung

Descripcion

VITE M6X1X30 U5739 8.8 ZN VITE M10X1,5X35 U5739 8.8 ZN DADO M10X 1,5 U5588 6.8 ZN DADO M 6X 1 D980 8 ZN ROS.M6 6,4X12,5X1,6 U6592 ZN ROS.M10 10,5X 20X 2 U6592 ZN FANALE X KIT LUCI CATARIFRANGENTE TONDO D.80 > PIASTRA SUPP.LUCI SUPPORTO KIT LUCI N.2 PANNELLI CARICHI SPORGENTI KIT DECALCOMANIE ORIETTA KIT DECALCOMANIE -CEARANCIO RAL2002 BICOMP.LT.1,5 PANNELLI CAR.SPORG.423X423 PANNELLI CAR.SPORG.423X282

BOLT M 6X1X30 SCREW M10X1,5X35 U5739 8.8 ZN NUT M10X 1,5 U5588 6.8 ZN NUT M6X1 D980 8 ZN PLANE WASHER D.6 WASHER M10 10,5X20X2 U6592 ZN LAMP KIT LIGHTS COMPL. D.80 ROUND REFLECTOR LIGHTS SUPPORT PLATE

VIS M 6X1X30 VIS M10X1,5X35 U5739 8.8 ZN ECROU M10X 1,5 U5588 6.8 ZN ECROU M6X1 D980 8 ZN RONDELLE D.6 RONDELL.M10 10,5X20X2 U6592 ZN FEU KIT ECLAIRAGE COMPL. CATADIOPTRE ROND D.80 PLAQUE DE SUPPORT ECLAIRAGE

SCHRAUBE M 6X1X30 SCHR. M10X1,5X35 U5739 8.8 ZN MUTTER M10X 1,5 U5588 6.8 ZN MUTTER M6X1 D980 8 ZN SCHEIBE D.6 SCHEIBE M10 10,5X20X2 U6592 ZN LAMPEN KIT LICHT KOMPL. RUNDER R_CKSTRAHLER D.80 LICHTERHALTERUNGSPLATTE

TORNILLO M 6X1X30 TORN. M10X1,5X35 U5739 8.8 ZN TUERCA M10X 1,5 U5588 6.8 ZN TUERCA M6X1 D980 8 ZN ARANDELA D.6 ARAND. M10 10,5X20X2 U6592 ZN FAROL SET LUCES COMPL. PAPEL REFRACTARIO REDONDO D.80 PLACA SOPORTE LUCES

N.2 JUTTING LOAD PANELS ORIETTA DECAL KIT DECAL KIT -CERAL2002 1,5

N.2 PANNEAUX CHARGES SAILLANT KIT DECALCOM. ORIETTA KIT DECALCOMANIE -CEK

N.2 TAFELN VORSPRINGENDE LADUN KIT ABZIEHB. ORIETTA IT ABZIEHB. -CES

2 PANELES CARGADOS SALIENTES SET CALCOM. ORIETTA ET CALCOMANAS -CE-

cod. G19530932

TAV. 321 Classe - Size B

Descrizione - Description

min.

max.

CARD.B1 Z6-Z6 L700 CARD.B1 Z8-Z6 L700 CARD.B1 Z20-Z6 L700 CARD.B1 Z8-Z6 L900 R.LIB CARD.B1 Z6-Z6 L900 R.LIB CARD.B2 Z6-Z6 L900 CARD.B3 Z8-Z6 L1300 CARD.B1 Z20-Z6 L900 R.L CARD.R4 Z20-Z6 L1210 OM-RL CARD.B3 Z6-Z6 L1200

700 700 700 900 900 900 1300 900 1210 1200

1100 1100 1100 1400 1400 1400 2000 1400

Codice - Code F08011711 F08011713 F08011714 F08011715 F08011716 F08011719 F08011720 F08011757 F08011764 F08011930

1700

Forcelle - Yokes (**)

Tipo - Type (*)

(A x B)

B1 (22 x 54) B1 (22 x 54) B1 (22 x 54) B1 (22 x 54) B1 (22 x 54) B2 (23,8 x 61,3) B3 (27 x 70) B1 (22 x 54) R4 (27 x 74,6) B3 (27 x 70)

A A A A A A A A A A

A A A B B B A B C A

Z6 (1"3/8)

Z6 (1"3/4)

Z8 (32x38)

Z20 (1"3/4)

Z21 (1"3/8)

G58161015 G58161015 G58161015 G58161015 G58161015

F08011772 F08011772 F08011772 F08011772 F08011772

F08011742 F08011742 F08011742 F08011742 F08011742

F08011758 F08011758 F08011758 F08011758 F08011758

F08011767 F08011767 F08011767 F08011767 F08011767

G58161016 F08011743 G58161015 F08011772 F08011742 F08011758 F08011767 F08011768 F08011766 F08011774 F08011773 G58161016 F08011743

(*)

RUOTA LIBERA OVERRUNNING CLUTCH

GIUNTO STANDARD STANDARD JOINT

Z8 (32x38)

36,25 36,00

37,82 37,77

6.03 6.00

38.10 38.00

44,45 44,42

44,37 44,32

34.93 34.90

34,87 34,82 28,14 27,89

29.72 29.67

11,00 10,95

11,13 11,07

8,64 8,59

8.74 8.69

5.99 5.96

2 32.0 0 32.0

91 31.9 66 31.9

Z21 (1"3/8)

34,97 34,92

44,27 44,12

45,29 45,03

Z20 (1"3/4)

40,28 40,13

GIUNTO OMOCINETICO CONSTANT VELOCITY JOINT

Z6 (1"3/4)

Z6 (1"3/8)

F08010152

39,21

34,88 34,85

(**)

KIT PRESSORE/BUSSOLA - KIT PUNCH/ROOT

37.69 37.53

Lunghezze Lengths

31,82 31,75

31,30

cod. G19530932

CARDANI Pos.

Cod. F08010152 F08011711 F08011713 F08011714 F08011715 F08011716 F08011719 F08011720 F08011742 F08011743 F08011757 F08011758 F08011764 F08011766 F08011767 F08011768 F08011772 F08011773 F08011774 F08011930 G58161015 G58161016

TAV. 321 Descrizione

Description

KIT PRESSORE BUSSOLA CAT I-IV> CARD.B1 Z6-Z6 L700 CARD.B1 Z8-Z6 L700 CARD.B1 Z20-Z6 L700 CARD.B1 Z8-Z6 L900 R.LIB CARD.B1 Z6-Z6 L900 R.LIB CARD.B2 Z6-Z6 L900 CARD.B3 Z8-Z6 L1300 FORCELLA CARD.32X38 Z8 B1 FORCELLA CARD.32X38 Z8 B3 CARD.B1 Z20-Z6 L900 R.L > FORCELLA CARD.1''3/4 Z20 B1 > CARDANO OM 3/4Z20-RL Z6 L1381 FORCELLA CARD.32X38 Z8 R4 FORCELLA CARD.1 3/8 Z21 B1 > FORCELLA CARD.1 3/8 Z6 R4 FORCELLA CARD.1''3/4 Z6 B1 > FORCELLA CARD.1 3/8 Z21 R4 > FORCELLA CARD.1 3/4 Z20 R4 CARD.B3 Z6-Z6 L1200 FORCELLA CARD.1'3/8 Z6 B1 FORCELLA CARD.1'3/8 Z6 B3 >

TOOLS FOR PTO YOKE CAT I-IV

cod. G19530932

PTO SHAFT B1 Z8-Z6 L700 UNIVERSAL JOINT B1 Z20-Z6 L700 CARD.B1 Z8-Z6 L900 FREE W. CARD.B1 Z6-Z6 L900 R.LIB UNIVERSAL JOINT 102 071 N T07 UNIV.JOINT B3 Z8-Z6 L1300 YOKE CARD.32X38 Z8 B1 YOKE CARD.32X38 Z8 B3 UNIVERSAL JOINTB1 Z20-Z6 L900

Description

Benennung

Descripcion

CARD ROUE LIBRE T100710 112R12 CARD. 102 071 N T07 T07 1 CAT

KARDAN CE T100710 112 R12 KARDAN 102 071 N T07 T07 1CAT

CARDAN CE T100710 112 R12 CARDæN 102 071 N T07 T07 1CAT

FOURCHETTE CARDAN Z8 B1

GABEL KARDAN Z8 B1

HORQUILLA CARDAN Z8 B1

CARD.R4 Z20-Z6 L1381 OM-RL FORK 32X38 Z8 R4 FORK 1 3/8 Z6 R4 YOKE 1" 3/4 Z6 B1 FORK 1 3/8 Z21 R4 UNIVERSAL JOINT B3 1200 CE

TAV. 260 Fila singola - Single row - Einreihig - Un seul rang - Hilera sencilla

Fori - Holes - Trous Löcher - Agujeros

Fori - Holes - Trous - Löcher - Agujeros

Nr.

0,5

0,6

0,8

1,2

1,5

2,2

2,5

24 G15823880 G15823890 G15823900 G15823910 G15823920 G15823930 G15823940 G15823950 G15823960 G15823970 45 G15824200 G15824210 G15824220 G15824230 G15824240 G15824250 G15824260 G15824270 G15824280 G15824290 75 G15824300 G15824310 G15824320 G15824330 G15824340 G15824350 G15824360 G15824370 G15824380 G15824390 90 G15824400 G15824410 G15824420 G15824430 G15824440 G15824450 G15824460 G15824470 G15824480 G15824490 120 G15824600 G15824610 G15824620 G15824630 G15824640 G15824650 G15824660 G15824670 G15824680 G15824690

Fila doppia - Double row - Doppelreihe - Double rang - Hilera doble

DR Fori - Holes - Trous Löcher - Agujeros

Fori - Holes - Trous - Löcher - Agujeros

Nr.

0,5

0,6

0,8

1,2

1,5

24 45 75 90 120

G15880010 G15880110 G15880210 G15880310 G15880410

G15880020 G15880120 G15880220 G15880320 G15880420

G15880030 G15880130 G15880230 G15880330 G15880430

G15880040 G15880140 G15880240 G15880340 G15880440

G15880050 G15880150 G15880250 G15880350 G15880450

G15880060 G15880160 G15880260 G15880360 G15880460

Fila Tripla - Triple row - Dreiergruppereihe - Triple rang - Hilera Triple

TR Fori - Holes - Trous Löcher - Agujeros

Fori - Holes - Trous - Löcher - Agujeros

Nr.

0,6

0,8

G15880810

G15880820

G15880860

G15880870

G15882500

G15880910

G15880920

120

G15880960

G15880970

cod. G19530932

USATE SEMPRE RICAMBI ORIGINALI ALWAYS USE ORIGINAL SPARE PARTS IMMER DIE ORIGINAL-ERSATZTEILE VERWENDEN EMPLOYEZ TOUJOURS LES PIECES DE RECHANGE ORIGINALES UTILIZAR SIEMPRE REPUESTOS ORIGINALES

Servizio Assistenza Tecnica - After Sales Service Servizio Ricambi - Spare Parts Service +39 0434 695410 DEALER:

*G19530932* MASCHIO GASPARDO SpA Registered office & Production plant Via Marcello, 73 - 35011 Campodarsego (Padova) - Italy Tel. +39 049 9289810 Fax +39 049 9289900 info@maschio.com www.maschionet.com

MASCHIO GASPARDO SpA Production plant Via Mussons, 7 - 33075 Morsano al Tagliamento (PN) - Italy Tel. +39 0434 695410 Fax +39 0434 695425 info@gaspardo.it

MASCHIO DEUTSCHLAND GMBH Äußere Nürmberger Straße 5 D - 91177 Thalmässing - Deutschland Tel. +49 (0) 9173 79000 Fax +49 (0) 9173 790079 dialog@maschio.de www.maschio.de

MASCHIO FRANCE Sarl 1, Rue de Mérignan ZA F - 45240 La Ferte St. Aubin France Tel. +33 (0) 2.38.64.12.12 Fax +33 (0) 2.38.64.66.79 info@maschio.fr

000 МАСКИО-ГАСПАРДО РУССИЯ Улица Пушкина, 117 Б 404126 Волжский Волгоградская область Тел. +7 8443 515152 факс. +7 8443 515153 info@maschio.ru

MASCHIO-GASPARDO ROMANIA S.R.L. Strada Înfrátirii, F.N. 315100 Chisineu-Cris (Arad) -România Tel. +40 257 307030 Fax +40 257 307040 info@maschio.ro

MASCHIO-GASPARDO North America 120 North Scott Park Road Eldridge, IA 52748 - USA Ph. +1 563 2859937 Fax +1 563 2859938 info@maschio.us

MASCHIO-GASPARDO IBERICA MASCHIO-GASPARDO POLAND MASCHIO-GASPARDO UCRAINA GASPARDO-MASCHIO TURCHIA MASCHIO-GASPARDO CINA

Research & Development MASCHIO GASPARDO S.p.A.