DOWNLOAD PDF Volkswagen Arteon 2018 - 2020 Maintenance Manual by www.heydownloads.com

Service

Maintenance

Arteon 2018 ➤ Arteon 2021 ➤ Arteon Shooting Brake 2021 ➤

n AG. Volkswagen AG do es n wage s k l ot g o yV ua b d ran ir se tee o h t or u ac a ss

ht rig py Co t.

agen lksw Vo by

AG.

Prote cted by

c o p yri gh t . C op yi

Service Department. Technical Information

in t his d o cu m en

r te o iva r rp fo ng

rrectness o f i t to the co n f orm spec atio h re n wit

es, in part or in w l purpos hole ercia , is n m ot com

pe rm itte d

ility ab y li an pt ce

un le

Edition 11.2022

Service Maintenance

Heading 1. Engine list 2. Service work 3. General information 4. Descriptions of work 5. Exhaust emissions test

ility ab y li an pt ce

r fo ng

rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um en

urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d p

un le

ht rig py Co t.

AG. Volkswagen AG d agen oes ksw not l o V gu 00 Periodic Technical Inspection (PTI) by ara d e nte is r o eo Glossary h ut ra a c s s ---Change history---

agen lksw Vo by

AG.

Prote cted by c o p yri gh t. C op yi

Technical information should always be available to the foremen and mechanics, because their careful and constant adherence to the instructions is essential to ensure vehicle road-worthiness and safety. In addition, the normal basic safety precautions for working on motor vehicles must, as a matter of course, be observed. All rights reserved. No reproduction without prior agreement from publisher. Copyright © 2022 Volkswagen AG, Wolfsburg

D4B806FF750

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

Contents Engine list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Service work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Information about flexible or fixed service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Service tables up to model year ►2020 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Service tables as of model year 2021► . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General warnings for workinglkon high-voltage system . . . . . . . . . . . . . . . . . . . . . . . . . . . . Vo swagen AG en AG.platform glifting does jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . a Raising vehicle with or trolley w not olks gu y V service schedule or service schedule b Entries in digital ............................ ara d nte ise r o Adverse th operating conditions . . . . . . . . . . . . . . . . . e.o. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . au data sticker . . . . . . . . . . . . . . . . . . . . . . . . . . r.ac. . . . . . . . . . . . . . . . . . . . . . . . . . . Vehicle ss Connecting vehicle diagnostic tester . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Vehicle identification number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Countries with hot climate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Country overview for diesel not compliant with EN 590/EN 15940 . . . . . . . . . . . . . . . . . . Country overview for petrol not compliant with EN 228 . . . . . . . . . . . . . . . . . . . . . . . . . . . . Motor code and motor number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Countries with high levels of dust . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Identification plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Shortened intervals for spark plug replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Descriptions of work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Swivel joints and suspension link mountings: inspecting . . . . . . . . . . . . . . . . . . . . . . . . . . All-wheel drive coupling: changing oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Automatic headlight control and static cornering light: checking function . . . . . . . . . . . . . . Automatic gearbox 09P: changing ATF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Battery (12 V): checking battery terminal clamps for secure seating . . . . . . . . . . . . . . . . . . Battery (12 V): checking with battery tester (always refer to workshop manual) . . . . . . . . Battery (12V): checking (applies only to Arteon eHybrid) . . . . . . . . . . . . . . . . . . . . . . . . . . Status of battery (12 V): reading - sending diagnosis protocol via online connection . . . . Front passenger front airbag: checking key switch and “ON/OFF function” . . . . . . . . . . . . Tyres: checking condition, wear pattern, tyre pressure and tread depth . . . . . . . . . . . . . . Brake and clutch system: changing brake fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Brake system and shock absorbers: inspecting for leaks and damage . . . . . . . . . . . . . . . . Brake fluid level: checking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Brakes, front and rear: checking thickness of brake pads and condition of brake discs . . Diesel fuel filter: draining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Diesel fuel filter: renewing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Diesel particulate filter: checking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Dual clutch gearbox 0D9: changing gear oil and filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . Dual clutch gearbox 0DL: changing gear oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Dual clutch gearbox 0GC: changing gear oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Electric windows: checking positioning (open and close functions) . . . . . . . . . . . . . . . . . . Fault memory of all systems: reading with vehicle diagnostic tester, correcting possible faults according to repair guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Boots: inspecting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Head-up display (HUD): removing protective film . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . High-voltage battery: checking charge level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Maintenance of high-voltage battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . High-voltage battery: charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hybrid components: inspect for damage to high-voltage components and wires. . . . . . . . . Interior and exterior body: inspecting for corrosion with doors and flaps open . . . . . . . . . . Poly V-belt: renew . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Poly V-belt: checking condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ht rig py Co t.

agen lksw Vo by

AG.

Prote cted by

c o p yri gh t . C op yi

4.23 4.24 4.25 4.26 4.27 4.28 4.29 4.30 4.31

do c um en

r te o iva r rp fo g n

rrectness of i t to the co nform spec a t i h re o n in wit thi s

es, in part or in w l purpos hole ercia , is n m ot com

pe rm itte d

un le

ility ab y li an pt ce

1 2 2.1 2.2 2.3 3 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14 4 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 4.10 4.11 4.12 4.13 4.14 4.15 4.16 4.17 4.18 4.19 4.20 4.21 4.22

Contents

1 6 6 9 17 25 25 25 27 27 28 29 30 31 32 33 34 34 35 35 40 42 44 48 49 49 53 53 54 54 55 67 73 74 76 79 79 81 81 82 82 82 82 83 83 83 84 84 84 85 85 85

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ en AG. Volkswagen AG does ag ksw not Maintenance - Edition 11.2022 Vol g

un le

pe rm itte d

r te o iva r rp fo ng

es, in part or in w l purpos hole ercia , is n m ot com

AG.

Prote cted by

ii Contents

agen lksw Vo by

4.66 4.67 4.68 4.69 5 5.1 5.2 6 7 8

c o p yri gh t. C op yi

4.62 4.63 4.64 4.65

ht rig py Co t.

4.61

in t his d o cu m en

4.40 4.41 4.42 4.43 4.44 4.45 4.46 4.47 4.48 4.49 4.50 4.51 4.52 4.53 4.54 4.55 4.56 4.57 4.58 4.59 4.60

Air filter: clean housing and renew filter element . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 Multi-purpose additive for diesel fuel: adding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 Multi-purpose additive for petrol fuel: add . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 Motor and components in motor compartment: inspecting for leaks and damage (from above and below) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 Engine cover panel “top”: removing and installing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 Engine data plate with Certification Test Group code: checking if fitted and for condition, also checking CTG code against the code in the engine control unit . . . . . . . . . . . . . . . . . . 109 Motor compartment cover (noise insulation) “bottom”: removing and installing . . . . . . . . . . 110 Engine oil level: checking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 Engine oil: draining, renewing oil filter and filling engine oil . . . . . . . . . . . . . . . . . . . . . . . . 111 Engine oil: capacities and specifications up to model year ►2020 . . . . . . . . . . . . . . . . . . . . 122 Engine oil: capacities and specifications as of model year 2021► . . . . . . . . . . . . . . . . . . . . 123 Panoramic sliding sunroof . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 Road test: performing (driving behaviour, noises, air conditioner etc.) . . . . . . . . . . . . . . . . 132 Wheel securing bolts: tighten to specified torque . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 Reducing agent (AdBlue®/DEF): replenishing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 Reducing agent (AdBlue®/DEF): changing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 Tyre Pressure Loss Indicator: calibrating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 Tyre repair set: checking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138 Window wash/wipe system and headlight washer system: checking function . . . . . . . . . . 139 Headlight adjustment: checking LED headlights with cornering light . . . . . . . . . . . . . . . . . . 143 Headlight adjustment: checking LED headlights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149 Sliding sunroof drains at rear: checking for blockage, cleaning if necessary . . . . . . . . . . . . 152 Service interval display: Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153 Service interval display: recoding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154 Track rods: checking clearance, attachment and boots . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155 Interior filter: cleaning housing and renewing filter element . . . . . . . . . . . . . . . . . . . . . . . . 156 Selective wheel torque control: changing oil in left and right clutch chambers, and resetting oil learnt values using vehicle diagnostic tester . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156 Selective wheel torque control: assessing oil degradation on left and right sides using vehicle diagnostic tester . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156 Transport mode: switching off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157 Transportation devices: removing blocking pieces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157 Clock and date: set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159 Underbody: inspecting for damage to underbody sealant, underbody panels, routing of lines, plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159 Warning stickers Arteon eHybrid: checking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159 Toothed belt (petrol engines): renewing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160 Camshaft drive toothed belt (diesel engines): renewing . . . . . . . . . . . . . . . . . . . . . . . . . . 160 Spark plugs: renew . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160 Exhaust emissions test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173 Exhaust emissions test for petrol engines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173 Exhaust emissions test for diesel engines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175 00 Periodic Technical Inspection (PTI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179 Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183 ---Change history--- . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186

rrectness o f i t to the co n f orm spec atio h re n wit

4.38 4.39

ility ab y li an pt ce

4.32 4.33 4.34 4.35 4.36 4.37

y ua db ran ise tee r o h Cooling system: checking anti-freeze protection or87 ut and coolant level . . . . . . . . . . . . . . . . . . ac a ss Cooling system for high-voltage system: checking coolant additive and coolant level . . . . 91

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

Engine list

(VIGG001733; Edition 11.2022) G. Volkswagen o yV db Petrol ise engines ⇒ page 1 r tho auDiesel engines ⇒ page 3

Note

To ease the search for an engine, the engine codes are listed in alphabetical order. Petrol engines Engines:

⇒

Petrol engine

Displace‐ ment Engine code DGEB

2.0

CJXA

CZPB

1.5

Petrol/hybrid en‐ gine 1.4

DADA

DGEB

4/4

4/4 115/5000-6000 250/1550-3500 74.5 80.0 10.0 Magneti Marelli TSI turbocharger

110/5000 250/1500-3500 74.5 85.7 10.5 Bosch Motronic MG 1 TSI turbocharger 95

yes1)/no

yes

Chain

Toothed belt

Petrol engine 2.0

DJHC

DKZA

DLRB

DNFE

4/4

206/5700-6500 350/1800-5600 82.5

140/4200-6000 320/1500-4100 82.5

200/5500-6500 350/1950-5400 82.5

206/5000-6500 400/2000-4900 82.5

140/4200-6000 320/1450-4200 82.5 84.2 11.65 Motronic SIMOS TSI turbocharger

agen lksw Vo by

Prote cted by c o p yri gh t. C op yi

AG.

unleaded, at 98 least (regular unleaded petrol RON 95 can also be used but with reduced performance) no

Petrol en‐ gine particu‐ late filter Belt-driven starter-alterna‐ tor Camshaft drive

ht rig py Co t.

r fo ng

4/4

do c um en

No. of cylinders/valves per 4/4 cylinder Power kW at rpm 206/5600-6500 Torque Nm at rpm 350/1700-5600 Bore ∅ mm 82.5 Stroke mm 92.8 Compression ratio 9.6 Injection/ignition Motronic SIMOS TSI turbocharger

RON

rrectness of i t to the co nform spec at i h re o n wit in t his

es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

ot g ua ran tee or ac ility ab y li an pt ce

un le

A AG do agen This chapter provides information on the following es nsubjects: lksw

Petrol engine

1) As of model year 2019 with petrol particulate filter

Engines: Displace‐ ment Engine code

⇒ I

No. of cylinders/valves per cylinder Power kW at rpm Torque Nm at rpm Bore ∅ mm

1. Engine list

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 Engines: Displace‐ ment Engine code

⇒ I

Stroke Compression ratio Injection/ignition

Petrol engine 2.0

DJHC

DKZA

DLRB

DNFE

94.2 92.8 92.8 9.3 11.65 9.3 Motronic SIMOS Motronic SIMOS Motronic SIMOS TSI turbocharger TSI turbocharger TSI turbocharger unleaded, 98 98 98 at least (regular unleaded (regular unleaded (regular unleaded petrol RON 95 petrol RON 95 petrol RON 95 can also be used can also be used can also be used but with reduced but with reduced but with reduced performance) performance) performance) no yes no

RON

Petrol en‐ gine particu‐ late filter Belt-driven starter-alter‐ nator Camshaft drive

92.8 9.3 TSI turbocharger 98

yes

Chain

Petrol engine 2.0

1) As of model year 2019 with petrol particulate filter

Engines: Displace‐ ment Engine code

⇒ I

Petrol engine 2.0

pe rm itte d

es, in part or in w l purpos hole ercia , is n m ot com

Petrol en‐ gine particu‐ late filter Belt-driven starter-alterna‐ tor Camshaft drive

yes

Chain

AG.

Prote cted by c o py rig ht . C op yi

2 1. Engine list

agen lksw Vo by

r te o iva r rp fo g n

4/4

yes no

Chain

320/1500-4100 82.5 92.8 12.2 TSI turbocharger 95

do c um en

unleaded, at least

ht rig py Co t.

RON

420/2100-5350 82.5 92.8 9.3 TSI turbocharger

rrectness of i t to the co nform spec a t i h re o n in wit thi s

Torque Nm at rpm 420/2100-5600 Bore ∅ mm 82.5 Stroke mm 92.8 Compression ratio 9.3 Injection/ignition TSI turbocharger

DNUA

200/5500-6500 380/1950-5300 82.5 84.2 9.3 Motronic SIMOS TSI turbocharger 98 (regular unleaded petrol RON 95 can also be used but with reduced performance) yes

ility ab y li an pt ce

un le

AG. Volkswagen AG d DNFG DNFF DNNA agen oes ksw not l o V g y No. of cylinders/valveseper 4/4 4/4 uara 4/4 db nte ris cylinder o e th or au Power 245/5600-6500 235/5350-6500 ac 140/4200-6000 sskW at rpm

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 Engines: Displacement Engine code

⇒ I

Petrol engine 1.5 DPCA

Petrol engine 2.0 DSFB

rrectness o f i t to the co n f orm spec atio h re n wit

1) As of model year 2019 with petrol particulate filter

Diesel engines

r te o iva r rp fo ng

Belt-driven starter-alterna‐ tor Camshaft drive

95 no no Chain

Diesel engine 2.0 DFGA

Diesel engine 2.0 DFHA

4/4

130/3500-4000 350/1750-3000 81.0 95.5 16.2 TDI common rail no PMS1) no

176/4000 500/1750-2500 81.0 95.5 15.5 TDI common rail Yes

110/3500-4000 340/1750-3000 81.0 95.5 16.2 TDI common rail Yes

140/3500-4000 400/1750-3250 81.0 95.5 16.2 TDI common rail Yes

Toothed belt

Prote cted by

c o p yri gh t . C op yi

Diesel particulate filter

140/4200-6000 320/1500-4200 82.5 92.8 11.65 TSI turbocharger

Diesel engine 2.0 CUAA

Toothed belt

AG.

No. of cylinders/valves per cylinder Power kW at rpm Torque Nm at rpm Bore ∅ mm Stroke mm Compression ratio Injection/ignition

4/4

Diesel engine 2.0 CRGA

agen lksw Vo by

⇒ I

ht rig py Co t.

Engines: Displacement Engine code

in t his d o cu m en

es, in part or in w l purpos hole ercia , is n m ot com

pe rm itte d

un le

ility ab y li an pt ce

No. of cylinders/valves per cylin‐ 4/4 4/4 der Power kW at rpm 110/5000-6000 224/5350-6500 Torque Nm at rpm 250/1500-3500 400/2000-5350 n AG. Volkswagen AG do es n wage s k l Bore ∅Vmm 74.5 82.5 ot g o y ua db ran Stroke mm 85.9 ir se tee 92.8 tho or u ac 9.3 Compression ratios a 10.5 s Injection/ignition Bosch Motronic MG 1 TSI turbocharger TSI turbocharger RON unleaded, at 95 98 least Petrol engine yes no particulate filter Belt-driven starter-alternator no no Camshaft drive Toothed belt Chain

Petrol engine 2.0 DUNA

Vehicles with diesel particulate filter (fitted ex-factory) can be identified by PR numbers 7MM, 7MV 7MJ, 4BI or 4BF on the vehicle data sticker. 1) PMS: particulate reduction system

1. Engine list

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 Engines: Displace‐ ment Engine code

⇒ I

No. of cylin‐ ders/valves per cyl‐ inder Power kW at rpm Torque Nm at rpm Bore ∅ mm Stroke mm Compression ratio Injection/ignition Diesel particulate filter Belt-driven starteralternator Camshaft drive

Diesel engine 2.0

CRGA

CUAA

DBGA

DFGA

4/4

130/3500-4000

176/4000

110/3500-4000

350/1750-3000

500/1750-2500

320/1750-3500

340/1750-3000

81.0 95.5 16.2 TDI common rail no PMS1) no

81.0 95.5 15.5 TDI - bi-turbo common rail Yes

81.0 95.5 16.2 TDI common rail Yes

Toothed belt

Vehicles with diesel particulate filter (fitted ex-factory) can be identified by PR numbers 7MM, 7MV 7MJ, 4BI or 4BF on the vehicle data sticker.

DSRB

DTSA

4/4

110/3000-4200

110/3250-4200

340/1700-2750

360/1700-2750

340/1600-3000

81.0 95.5 16.0 TDI common rail Yes

81.0 95.5 16.0 TDI common rail Yes no

400/1750-3250

Diesel particulate filter Belt-driven starteralternator Camshaft drive

r te o iva r rp fo g n

es, in part or in w l purpos hole ercia , is n m ot com

No. of cylin‐ ders/valves per cyl‐ inder Power kW at rpm Torque Nm at rpm Bore ∅ mm Stroke mm Compression ratio Injection/ignition

81.0 95.5 16.0 TDI common rail Yes

Toothed belt

140/3500-4000

81.0 95.5 16.2 TDI common rail Yes

Vehicles with diesel particulate filter (fitted ex-factory) can be identified by PR numbers 7MM, 7MV 7MJ, 4BI or 4BF on the vehicle data sticker.

4 1. Engine list

Toothed belt

AG.

pe rm itte d

DSRA

do c um en

Diesel engine 2.0

Prote cted by c o py rig ht . C op yi

4/4

Diesel engine 2.0

rrectness of i t to the co nform spec a t i h re o n in wit thi s

DFHA

Diesel engine 2.0

agen lksw Vo by

Diesel engine 2.0

ht rig py Co t.

⇒ I

ility ab y li an pt ce

Engines: Dis‐ place‐ ment Engine code

un le

1) PMS: particulate reduction system

AG. Volkswagen AG d agen oes ksw not l o gu yV b ara d e nte is r o eo h ut ra a c s s

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 Engines: Displacement Engine code

⇒ I

No. of cylinders/valves per cylin‐ der Power kW at rpm Torque Nm at rpm Bore ∅ mm Stroke mm Compression ratio Injection/ignition Diesel particulate filter Belt-driven starter-alternator Camshaft drive

Diesel engine 2.0 DTSB

Diesel engine 2.0 DTUA

4/4

110/3000-4200 360/1600-2750 81.0 95.5 16.0 TDI common rail Yes no Toothed belt

147/3600-4100 400/1750-3500 81.0 95.5 16.0 TDI common rail Yes no Toothed belt

AG. Volkswagen AG d agen oes ksw not l o V gu y b ara d nte ise r o eo h t u ra a c s s

in t his d o cu m en

ht rig py Co t.

r te o iva r rp fo ng

rrectness o f i t to the co n f orm spec atio h re n wit

es, in part or in w l purpos hole ercia , is n m ot com

pe rm itte d

ility ab y li an pt ce

un le

Vehicles with diesel particulate filter (fitted ex-factory) can be identified by PR numbers 7MM, 7MV 7MJ, 4BI or 4BF on the vehicle data sticker.

1. Engine list

agen lksw Vo by

AG.

Prote cted by

c o p yri gh t. C op yi

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

Service work

Information reference flexible or fixed service ⇒ page 6 Service tables up to model year ►2020 ⇒ page 9 Service tables as of model year 2021► ⇒ page 17

2.1

Information about flexible or fixed serv‐ . Volkswagen AG gen AG does a w ice ks not Vol gu ara nte eo ra c

y db

ise ⇒ page 6 Service identification or h ut

un le

ility ab y li an pt ce

a ⇒ page 6 Flexible service ss

Service interval display ⇒ page 7

Service identification

– Referring to vehicle data sticker, check if vehicle is equipped with following PR numbers:

The PR number is decisive for the service intervals ⇒ page 9. Vehicle ID with PR number Model year

PR number

2018► 2018►

QI6 QI1, QI2, QI3, QI4, QI7

Service

In the past, the PR numbers QG0, QG1 and QG2 determined the type of service.

agen lksw Vo by

AG.

Prote cted by

c o p yri gh t . C op yi

Flexible service

ht rig py Co t.

r fo ng

With immediate effect, these PR numbers only denote whether an engine oil level sensor is installed or not and no longer have an influence on the oil change interval.

2.1.2

The flexible service enables long service intervals, depending on individual driving style and the conditions under which the vehicle is used. Note

For the flexible service a special LongLife engine oil is required ⇒ page 9 . Vehicles with production control number “QI6” are set up for flexible service at the factory. This means that these vehicles have a flexible service interval display and are fitted with the following components: ♦ Flexible service interval display in dash panel insert ♦ Engine oil level sensor ♦ Brake pad wear indicator (if fitted) For vehicles with flexible service the service interval is deter‐ mined by the control unit and is indicated on service interval display (SID) ⇒ page 7 . Therefore the service intervals are flexible.

6 2. Service work

rrectness of i t to the co nform spec at i h re o n wit in t his

2.1.1

Flexible service Fixed service

do c um en

es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

Fixed service ⇒ page 7

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

2.1.3

Fixed service

For vehicles with a fixed service, fixed services are calculated. This means that the mileage or time values are already set by Volkswagen. For normal operating conditions achieving these service intervals is technically assured. Therefore the service intervals are fixed. For vehicles ♦ which have not been delivered with extended servicing inter‐ vals (ESI) (PR numbers “QI1”, “QI2”, “QI3”, “QI4”, “QI7”), ♦ that have had extended servicing interval (ESI) stopped ♦ in which no LongLife engine oil was used the fixed service applies. These non-flexible service intervals apply to all types of service including an engine oil change. Therefore, these vehicles have a fixed service interval display ⇒ page 7 and for maintenance the fixed service intervals (rigid service intervals) apply. These vehicles are fitted with the following components: ♦ Fixed service interval display in dash panel insert ♦ Engine oil level sensor ♦ Brake pad wear indicator (if fitted)

AG. Volkswagen AG d agen oes ksw not l o V gu y b ara d nte ise r o eo h t Introduction of extended servicing intervals (ESI) ⇒aupage 7 ra c s s

2.1.4

Service interval display

pe rm itte d

un le

ility ab y li an pt ce

Flexible service interval display (only vehicles with a flexible service) ⇒ page 7

rrectness of i t to the co nform spec a t i h re o n in wit thi s

es, in part or in w l purpos hole ercia , is n m ot com

Fixed service interval display (only vehicles with a fixed service) ⇒ page 8 Service type for service due ⇒ page 8 Service initial warning ⇒ page 8

Retrieving service information from Infotainment system ⇒ page 8 Service interval display: resetting ⇒ page 153 Service interval display: recoding ⇒ page 154 Introduction of extended servicing intervals (ESI)

AG.

♦ The service intervals on vehicles with a flexible service is calculated. Input values such as, distance travelled, fuel con‐ sumption, oil temperature and loading on diesel particulate filter are evaluated by the control unit.

agen lksw Vo by

c o p yri gh t. C op yi

Calculation of service intervals:

ht rig py Co t.

Flexible service interval display (only vehicles with a flexible service)

do c um en

r te o iva r rp fo g n

Ask your importer if the extended servicing interval (ESI) is available for your country.

Prote cted by

♦ The result of the evaluation is a value for the deterioration of the oil due to thermal loading. ♦ The oil deterioration is the deciding factor concerning the distance that can still be driven to the next service. 2. Service work

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 Note

For vehicles with a flexible service but which are serviced ac‐ cording to fixed service intervals, the service interval display must be recoded to “non-flexible” ⇒ page 154 . Fixed service interval display (only vehicles with a fixed service) Calculation of service intervals: ♦ The service interval for vehicles with a fixed service is calcu‐ lated in fixed service intervals. This means that the mileage or time values have been previously determined and speci‐ fied by Volkswagen. ♦ For normal operating conditions achieving these service in‐ AG. Volkswagen AG d agen tervals is technically assured. oes w s k n l

ot g ua ran tee or ac

un le

♦

pe rm itte d

played.

rrectness o f i t to the co n f orm spec atio h re n wit

Service initial warning If a service is due, “Service initial warning” appears on dash panel insert display when ignition is switched on. ♦ On vehicles with text messages on dash panel insert display the following appears: “Service in --- km or --- days”. The service information disappears after a few seconds or if the motor is on. ♦ The service initial warning is displayed 20 days before the next service is due. r te o iva r rp fo ng

♦ The remaining distance displayed is always rounded to the nearest 100 km or the remaining time rounded to full days. Retrieving service information from Infotainment system

Prote cted by

– Press Home function button.

AG.

– Switch on infotainment system.

– Press Vehicle function button. – Tap Setup function button. – In the menu, scroll to the Service function button. – Press Service function button. The service information is displayed in Infotainment system.

8 2. Service work

agen lksw Vo by

c o p yri gh t. C op yi

– Switch on ignition.

ht rig py Co t.

The current service information can always be read with ignition switched on, engine switched off and vehicle stationary.

in t his d o cu m en

es, in part or in w l purpos hole ercia , is n m ot com

The service information disappears after a few seconds or if the motor is on.

ility ab y li an pt ce

o yV db e s ri ho ut On vehicles with text messages on dash panel insert, the a s message “Service now” sand a “spanner symbol” are dis‐

Service type for service due

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

2.2

Service tables up to model year ►2020 Note

♦ The service tables apply in general with differences depend‐

ing on the vehicle model and equipment level. There is no relation between individual vehicles and identified vehicle identification numbers.

♦ Vehicle-specific time and mileage dependent additional work

can only be found in the ⇒ maintenance tables.

2.2.1

Delivery inspection

Scope of work – – – –

12V battery: check battery clamp for firm seating. Transportation mode: switch off. Service interval display: reset. Status of 12V battery: read.

•

Runs automatically on vehicles with battery monitor control unit -367- at switching off of transportation mode.

– 12V battery: check using -VAS 6161-. Only applicable to vehicles without battery data module.

– – – – – – – – –

Event memories of all systems: read. Time and date: set. All switches, electrical consumers, sockets, gauges and other control elements: check function. Front passenger airbag: check key switch and ON/OFF function. agen AG Window regulators: initialise AG. Volksw(activate) does agen ksw n l o Vehicle interior: check for cleanliness. ot gua yV b d ran e ris Protective seat covers and protective carpet film:teeremove. ho t or a au All ss equipment which has been packed inside vehiclec(if part of original equipment): install. Two safety hammers: install according to installation instructions.

•

Applies only to the Netherlands.

– – – – – – – – – – – – – – –

Vehicle exterior: check for cleanliness. Tyre pressure: check. Wheel bolts: tighten to specified torque. Wiper blade protection: remove. Tyre Pressure Loss Indicator: calibrate after tyre pressure has been corrected. Vehicle: inspect for leaks and damage from above and below. Brake system: inspect for leaks and damage. Transportation devices: remove (if fitted). Vehicle underside (underbody): inspect for damage. Windscreen wash/wipe system and headlight washer system: check function and settings. Engine oil level: check; observe oil specification when topping up. Coolant level: check. Brake fluid must be changed if vehicle is older than 12 months. Brake fluid level: check that it is at maximum. Keys: check number, operation and cleanliness.

r te o iva r rp fo ng

es, in part or in w l purpos hole ercia , is n m ot com

rrectness o f i t to the co n f orm spec atio h re n wit

in t his d o cu m en

ht rig py Co t.

pe rm itte d

un le

ility ab y li an pt ce

•

2. Service work

agen lksw Vo by

AG.

Prote cted by c o py rig ht . C op yi

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 Scope of work – Service Schedule / Digital Service Schedule: enter pre-delivery inspection. – Carry out road test. – Charging cable: check that cable is present and check its condition. • –

ility ab y li an pt ce

n AG. Volkswagen AG do es n wage s k l ot g o yV ua b High-voltage battery: echarging d ran ir s tee o h t or Applies only to sBEV and PHEV ac au s

es, in part or in w l purpos hole ercia , is n m ot com

Scopes of service

rrectness of i t to the co nform spec a t i h re o n in wit thi s

2.2.2

pe rm itte d

un le

•

Applies only to BEV and PHEV

Note

♦ Depending on the time elapsed and the mileage since the

last service, service events may be combined (inspection with oil change).

♦ An extended scope of inspection should be carried out in

combination with an inspection.

♦ The scopes of service work are generally applicable and dif‐

♦ Scopes of service work for individual vehicles can be found

only in the maintenance tables. ⇒ Maintenance tables

Scope of work

AG.

Prote cted by

Exten‐ ded scope of inspec‐ tion (recom‐ mended in addi‐ tion to regular inspec‐ tion)

agen lksw Vo by

c o p yri gh t . C op yi

Inspec‐ tion

ht rig py Co t.

Oil change service

do c um en

r te o iva r rp fo g n

fer according to vehicle model and equipment level. There is no relation between individual vehicles and identified vehicle identification numbers.

Vehicle interior X X X

– Interior lights: check function of headliner, luggage compartment and glove compartment lights. – Horn: check function. – Charging cable: check that cable is present and check its condition. •

Vehicle exterior X X X X

10 2. Service work

Applies only to BEV and PHEV

– High-voltage battery: check charge level, charge as necessary. •

Applies only to BEV

– – – –

Headlight washer system: check function. Front lighting: check function. Static cornering light (cornering light): check function. Automatic headlight control: check function.

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 Inspec‐ tion

Exten‐ ded scope of inspec‐ tion (recom‐ mended in addi‐ tion to regular inspec‐ tion)

Scope of work

– –

– Wiper blades: move blades to service position and check for damage; check park position. – Interior and exterior of body: inspect for corrosion. – Windscreen: visual check for damage – High-voltage charging socket in radiator grille: inspect for soiling and damage.

es, in part or in w l purpos hole ercia , is n m ot com

•

Applies only to PHEV

– High-voltage charging socket in radiator grille and tank cap: inspect for soiling and damage. •

Applies only to BEV

– Reducing agent (AdBlue®): replenish only if customer requests.

Prote cted by c o p yri gh t. C op yi

X X X X X X X X X

– Drain engine oil and renew oil filter. – Motor and components in motor compartment: inspect for leaks and damage (from below). – Gearbox, final drive and drive shaft boots: inspect for leaks and dam‐ age. – Brakes, front and rear: check thickness of pads/linings and condition of brake discs. – Poly V-belt: check condition. – Swivel joints, axle mountings, coupling rod bearings and anti-roll bar rubber mountings: perform visual inspection for damage. – Track rods: check clearance, attachment and boots. – Brake system and shock absorbers: inspect for leaks and damage. – Exhaust system: inspect for leaks, firm seating and damage. – Underbody: inspect for damage to undercoating, underbody cladding, routing of lines, plugs. – Front and rear coil springs and rubber buffers: inspect for damage. – Warning stickers: check that they are present. •

AG.

Underside of vehicle X X

– Panoramic sliding sunroof/sliding sunroof: check noise and function.

do c um en

If part of equipment r te o iva r rp fo g n

•

agen lksw Vo by

rrectness of i t to the co nform spec a t i h re o n in wit thi s

pe rm itte d

un le

ility ab y li an pt ce

X X

AG. Volkswagen AG d agen oes ksw not l o V gu by ara d e Rear lighting: check function. nte is r o eo h ut ra Windscreen wash/wipe system: check function and spray jet settings a c s and adjust ifsnecessary; check for damage.

ht rig py Co t.

Oil change service

Applies only to PHEV

– Warning stickers: check that they are present. •

Applies only to BEV

2. Service work

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 Inspec‐ tion

Exten‐ ded scope of inspec‐ tion (recom‐ mended in addi‐ tion to regular inspec‐ tion)

Scope of work

– Removable towing bracket: check. • X

If part of equipment

– Air suspension: check for leaks and damage. olk yV db e ris ho ut aTyre pressure: check.

Tyres un le

– Window wash/wipe system: check anti-freeze protection; replenish washer fluid. – Hybrid components: inspect for damage to high-voltage components and wires.

– High-voltage components and high-voltage cables: inspect for damage and correct routing and securing of lines. AG.

• X

Applies only to PHEV

agen lksw Vo by

• X

Applies only to PHEV

r fo ng

es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

•

do c um en

Engine oil: replenish. Oil level: check. Battery and, if fitted, second battery: check with battery tester. Engine and components in engine compartment: inspect for leaks and damage (from above). – Brake fluid level (dependent upon brake pad/lining wear): check. – Cooling system: check anti-freeze protection and coolant level. – Check cooling system for high-voltage system and also check presence and attachment of tamperproof seal on coolant expansion tank

Prote cted by c o py rig ht . C op yi

– – – –

rrectness of i t to the co nform spec at i h re o n wit in t his

X X X

–s s – Tyre mobility set: check for damage and use. – Tyres: check condition and wear pattern of tyre; enter tread depth. ility ab y li an pt ce

X X X Motor compartment X X X X

olkswagen AG does not gu ara nte eo ra c

en AG. V Applies onlyswtoagTouareg

•

ht rig py Co t.

Oil change service

Applies only to BEV

– Plenum chamber: check for soiling. • X

– Plenum chamber: check for soiling. •

Concluding work X X X

12 2. Service work

Applies only to up!

Applicable for e-up! only

– Service interval display: Reset – Headlight adjustment: check and adjust as necessary.

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 Oil change service

Inspec‐ tion

Exten‐ ded scope of inspec‐ tion (recom‐ mended in addi‐ tion to regular inspec‐ tion)

Scope of work

– Tyre Pressure Loss Indicator: calibrate after tyre pressure has been corrected. – Carry out road test. – High-voltage battery: charge.

X X

• X

– High-voltage battery: charge. •

2.2.3

Applies only to PHEV

Applies only to BEV

Service intervals

n AG. Volkswagen AG do es n wage ot g For operation with fuels that are »NOT« compliant ua ran with standard EN 228 ⇒ page 33 or EN 590/ tee or EN 15940 ⇒ page 32 ac

Oil change service

---

rrectness of i t to the co nform spec at i h re o n wit in t his

QI1 every 5,000 km or 1 year (fixed) 1) --QI2 every 7,500 km or 1 year (fixed) 1) --QI3 every 10,000 km or 1 year (fixed) 1) QI4 every 15,000 km or 1 year (fixed) 1) QI6 --max. 30,000 km or 2 years (flexible) 1) QI7 --every 10,000 mi or 1 year (fixed) 1)

Prote cted by

-----

AG.

Inspection

Climate and traffic con‐ ditions usual for passen‐ ger vehicles operated on fuels compliant with EN 228 or EN 590/EN 15940

For operation with fuels that are »NOT« compliant with standard EN 228 ⇒ page 33 or EN 590/ EN 15940 ⇒ page 32

agen lksw Vo by

c o p yri gh t. C op yi

Scope of work

ht rig py Co t.

r fo ng

1) Whichever occurs first.

do c um en

es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

ks Climate and traffic con‐ Vol by d ditions usual for passen‐ e s ri ger vehicles operated on tho u a fuels compliant with EN ss 228 or EN 590/EN 15940

ility ab y li an pt ce

un le

Scope of work

QI1 every 10,000 km or 1 year 1) QI2 every 15,000 km or 1 year 1)

2. Service work

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 Scope of work

Climate and traffic con‐ ditions usual for passen‐ ger vehicles operated on fuels compliant with EN 228 or EN 590/EN 15940

For operation with fuels that are »NOT« compliant with standard EN 228 ⇒ page 33 or EN 590/ EN 15940 ⇒ page 32

---

QI3 every 10,000 km or 1 year 1) QI4 every 15,000 km or 1 year 1)

1) Whichever occurs first.

Climate and traffic con‐ ditions usual for passen‐ ger vehicles operated on fuels compliant with EN 228 or EN 590/EN 15940

rrectness of i t to the co nform spec at i h re o n wit in t his

Scope of work

For operation with fuels that are »NOT« compliant with standard EN 228 ⇒ page 33 or EN 590/ EN 15940 ⇒ page 32

Extended scope of in‐ After 60,000 km or spection 3 years (recommended in addition then every 60,000 km or to regular inspection) 2 years 1)

After 30,000 km or 2 years or after 20,000 km or 2 years 1)

Air filter: clean housing and re‐ new filter element

Every 60,000 km or 4 years 1)

AG.

Air filter: clean housing and re‐ new filter element • Applies only to Polo with en‐ gine code CHYB & CHYC and up! with PFI

Climate and traffic conditions usu‐ al for passenger vehicles

Countries with high levels of dust ⇒ page 34

agen lksw Vo by

Scope of work

Prote cted by c o py rig ht . C op yi

Air filter

ht rig py Co t.

2.2.4

r fo ng

1) Whichever occurs first.

do c um en

es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

un le

ility ab y li an pt ce

QI4 30,000 km or 2 years then every 30,000 km or 1 year 1) QI6 --30,000 km or 2 yearsgen AG. Volkswagen AG d a oes then every 30,000 ksw or not olkm gu yV 1) b ara d 1 year e nte is r o h --- e or a ut QI7 a c ss 20,000 mi or Every 1) 2 years

Every 30,000 km or 2 years 1)

Every 90,000 km or 6 years 1)

Every 30,000 km or 2 years 1)

Scope of work

Climate and traffic conditions usu‐ al for passenger vehicles

Countries with high levels of dust ⇒ page 34

Interior filter: clean housing and renew filter element

Every 60,000 km or 2 years 1)

Max. 1 year or 30,000 km 1)

1) Whichever occurs first.

2.2.5

Interior filter

1) Whichever occurs first.

14 2. Service work

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ AG. Volkswagen AG d agen oes - Edition 11.2022 Maintenance ksw not l o V ss

Scope of work

es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

un le

Sliding sunroof drains at rear

ility ab y li an pt ce

2.2.6

gu ara nte eo ra c

by ed ris o th au

Countries with high levels of dust ⇒ page 34

Max. 2 years or 30,000 km 1)

Max. 1 year or 15,000 km 1)

Climate and traffic conditions usu‐ al for passenger vehicles

Countries with high levels of dust ⇒ page 34

Toothed belt and camshaft drive tensioning roller: renew. • Applies only to TDI bi-turbo

Every 120,000 km

Toothed belt and camshaft drive tensioning roller: renew. • Applies to all diesel engines with toothed belt

Every 210,000 km

Every 120,000 km

Sliding sunroof drains at rear: checking for blockage, cleaning if necessary 1) Whichever occurs first.

AG.

---

agen lksw Vo by

Toothed belt drive for coolant pump: renew. • Applies to all petrol engines with toothed belt for coolant pump

---

do c um en

Toothed belt and camshaft drive tensioning roller: renew. • Applies to all petrol engines with toothed belt

Prote cted by c o py rig ht . C op yi

Scope of work

r fo ng

Toothed belt

ht rig py Co t.

2.2.7

rrectness of i t to the co nform spec at i h re o n wit in t his

Climate and traffic conditions usu‐ al for passenger vehicles

Every 120,000 km

1) Whichever occurs first.

Engines with toothed belts that have no prescribed replacement or inspection interval are engineered to last longer. Volkswagen recommends an inspection of the toothed belt after 300,000 km or 15 years.

2.2.8

Poly V-belt Scope of work

Climate and traffic conditions usu‐ al for passenger vehicles

Countries with high levels of dust ⇒ page 34

---

Every 60,000 km

Diesel compliant with EN 590/EN 15940

Diesel not compliant with EN 590/ EN 15940 ⇒ page 32

Diesel fuel filter: renewing • Applies only to Touareg

Every 60,000 km

Every 30,000 km

Diesel fuel filter: renewing

Every 90,000 km

Every 30,000 km

Poly V-belt: renew

2.2.9

Diesel fuel filter Scope of work

2. Service work

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

2.2.10

Spark plugs

Scope of work Spark plugs: renew Spark plugs: renew • Applies for all 6-cylin‐ der engines

Petrol engine compliant with EN 228

E100

Petrol engine not compli‐ ant with EN 228 ⇒ page 33

Every 60,000 km or 4 years 1) Every 90,000 km or 6 years 1)

Every 40,000 km or 4 years 1)

Every 30,000 km / 20,000 km or 2 years 1) and every 15,000 km / 10,000 km or 1 year 1)

1) Whichever occurs first.

2.2.11

Brake fluid Scope of work

Climate and traffic conditions usu‐ Only for markets outside Europe al for passenger vehicles and with fixed oil change intervals AG. Volkswagen A

n G do Brake and clutch system: chang‐ 3 lkyears es n wage after initial registration, ot g o s V y ing brake fluid then every 2 years ua b d r

pe rm itte d

un le

Automatic gearbox

Automatic gearbox: change ATF.

---

Every 60,000 km

USA

rrectness of i t to the co nform spec a t i h re o n in wit thi s

Climate and traffic condi‐ Countries with hot climate tions usual for passenger ⇒ page 31 vehicles

es, in part or in w l purpos hole ercia , is n m ot com

Scope of work

2.2.13

an tee or ac

e ris ho t au

ility ab y li an pt ce

2.2.12

Every 2 years

Every 80,000 mi

Multi-purpose additive Climate and traffic conditions usu‐ al for passenger vehicles

Multi-purpose additive for diesel fuel: adding Multi-purpose additive for petrol fuel: add

---

At every service.

---

At every service.

Russia

do c um en

ht rig py Co t.

Prote cted by c o py rig ht . C op yi

Country-specific additional work dependent on time and mileage Scope of work

Dual clutch gearbox (DSG) 02E and 0D9: change gear oil and filter. Dual clutch gearboxes (DSG) 0DD, 0DL and 0BH: change gear oil. Dual clutch gearbox (DSG) 0GC: change gear oil.

16 2. Service work

AG.

Reducing agent (AdBlue®/DEF): replenishing • Only if requested by customer, and as a separate charge

agen lksw Vo by

2.2.14

r te o iva r rp fo g n

Scope of work

Interval

At every service.

Every 60,000 km Every 60,000 km Every 120,000 km

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 Scope of work

Interval

Diesel particulate filter: checking All-wheel drive coupling: changing oil Front differential lock: changing oil Reducing agent (AdBlue®/DEF): changing • Applies only to vehicles driven less than 15,000 km in 4 years n AG. Volkswagen A

G do es n ot g ua ran tee or ac

age ksw Vol y b ed ris o h t au

un le

s Service stables as of model year 2021►

rrectness of i t to the co nform spec at i h re o n wit in t his

♦ Deviating scopes of service no longer include extended ad‐ ditional inspections. These must now also be carried out within the scope of every inspection. ♦ Deviating service intervals: inspection is now always due after the same interval, meaning e.g. for PR-number QI4: after 30,000 km or 2 years, whichever occurs first. ♦ Individual intervals of the additional work have been adapted to the new inspection interval.

2.3.1

Delivery inspection

Scope of work

Prote cted by c o p yri gh t. C op yi

Runs automatically on vehicles with battery monitor control unit -367- at switching off of transportation mode.

•

AG.

– 12V battery: check using -VAS 6161-.

agen lksw Vo by

•

ht rig py Co t.

r fo ng

Diagnostic work – Transportation mode: switch off. – Status of 12V battery: read.

do c um en

es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

A new maintenance concept has been introduced as of model year 2021►. Compared with the previous concept, the main features are as follows:

ility ab y li an pt ce

2.3

At 180,000 km/210,000 km, then every 30,000 km Every 3 years Every 3 years Every 4 years

Only applicable to vehicles without battery data module.

– Service interval display: reset. – Event memories of all systems: read. Vehicle interior – Front passenger airbag: check key switch and ON/OFF function. – Vehicle interior: check for cleanliness. – All switches, electrical consumers, sockets, gauges and other control elements: check function. – Window regulators: initialise (activate) – Time and date: set. – Two safety hammers: install according to installation instructions. •

Applies only to the Netherlands.

– High-voltage battery: check charge level (recommendation: approx. 80 % when handing over to custom‐ er) •

Applies only to BEV and PHEV

Vehicle exterior – Vehicle exterior: check for cleanliness. 2. Service work

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 Scope of work

Applies only to BEV and PHEV

2.3.2

Scopes of service

Note

♦ Depending on the time elapsed and the mileage since the r te o iva r rp fo ng

♦ The scopes of service work are generally applicable and dif‐

Oil change Inspection service

AG.

only in the maintenance tables. ⇒ Maintenance tables

agen lksw Vo by

Prote cted by c o py rig ht . C op yi

♦ Scopes of service work for individual vehicles can be found

ht rig py Co t.

fer according to vehicle model and equipment level. There is no relation between individual vehicles and identified vehicle identification numbers.

Scope of work

Vehicle interior X X

18 2. Service work

– Interior lights: check function of headliner, luggage compartment and glove compartment lights. – Horn: check function.

in t his d o cu m en

last service, service events may be combined (inspection with oil change).

rrectness o f i t to the co n f orm spec atio h re n wit

•

es, in part or in w l purpos hole ercia , is n m ot com

pe rm itte d

un le

ility ab y li an pt ce

– Wheel bolts: tighten to specified torque. – Wiper blade protection: remove. Underside of vehicle – Vehicle underside (underbody): inspect for damage. – Brake system: inspect for leaks and damage. – Transportation devices: remove (if fitted). – Vehicle underside: inspect for leaks and damage. Tyres – Tyre pressure: check. Motor compartment – Coolant level: check. – Engine oil level: check; observe oil specification when topping up. – Brake fluid level: check that it is at maximum. – Brake fluid: renew, if vehicle is older than 12 months. – Windscreen wash/wipe system and headlight washer system: check function and settings. Concluding work . Volkswagen AG gen AG does swa k not l o – 12V battery: check battery clamp for firm seating. gu yV b ara d e nte – All equipment which has been packed inside vehicle (ifopart ris of original equipment): install. eo h ut ra a – Tyre Pressure Loss Indicator: calibrate after tyre pressure has been corrected. c s s – Keys: check number, operation and cleanliness. – Service Schedule / Digital Service Schedule: enter pre-delivery inspection. – Carry out road test. – Charging cable: check that cable is present and check its condition.

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 Oil change Inspection service X

Scope of work – Charging cable: check that cable is present and check its condition. •

Applies only to BEV and PHEV

– High-voltage battery: check charge level, charge as necessary. •

Applies only to BEV

X X X X X X

– – – – – –

–

X X X

– – –

Headlight washer system: check function. Front lighting: check function. Static cornering light (cornering light): check function. AG. Volkswagen AG d agen o w s kcontrol: check function. es not Automatic headlight Vol gu by ara d e Rear lighting:rischeck function. nte o e h ut wash/wipe system: check function and sprayorjet Windscreen ac settings and ad‐ a s s just if necessary; check for damage. Wiper blades: move blades to service position and check for damage; check park position. Interior and exterior of body: inspect for corrosion. Windscreen: visual check for damage High-voltage charging socket in radiator grille or left wing: inspect for soiling and damage.

Vehicle exterior

un le

Applies only to BEV

– Reducing agent (AdBlue®): replenish only if customer requests.

X X X X

AG.

X X

Only for T-Roc Cabriolet

agen lksw Vo by

– Convertible top: perform water test. •

X Underside of vehicle X X

Only for T-Roc Cabriolet

Prote cted by c o p yri gh t. C op yi

• X

r te o iva r rp fo ng

– Convertible top: clean and lubricate locking element. ht rig py Co t.

If part of equipment

in t his d o cu m en

•

pe rm itte d

es, in part or in w l purpos hole ercia , is n m ot com

– High-voltage charging socket in radiator grille and tank cap: inspect for soiling and damage.

•

Applies only to PHEV

rrectness o f i t to the co n f orm spec atio h re n wit

ility ab y li an pt ce

•

– Panoramic sliding sunroof/sliding sunroof: check noise and function. – Drain engine oil and renew oil filter. – Motor and components in motor compartment: inspect for leaks and damage (from below). – Gearbox, final drive and drive shaft boots: inspect for leaks and damage. – Brakes, front and rear: check thickness of pads/linings and condition of brake discs. – Poly V-belt: check condition. – Poly V-belt and tensioning roller for belt-driven starter-alternator: check condi‐ tion. – Swivel joints, axle mountings, coupling rod bearings and anti-roll bar rubber mountings: perform visual inspection for damage. – Track rods: check clearance, attachment and boots. 2. Service work

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 Oil change Inspection service X X X X X

Scope of work – Brake system and shock absorbers: inspect for leaks and damage. – Exhaust system: inspect for leaks, firm seating and damage. – Underbody: inspect for damage to undercoating, underbody cladding, routing of lines, plugs. – Front and rear coil springs and rubber buffers: inspect for damage. – Warning stickers: check that they are present. •

– Warning stickers: check that they are present. •

Applies only to BEV

– Removable towing bracket: check. •

Applies only to PHEV

If part of equipment

– Air suspension: check for leaks and damage. •

Applies only to Touareg

Tyres

– Window wash/wipe system: check anti-freeze protection; replenish washer flu‐ id. – Hybrid components: inspect for damage to high-voltage components and wires. •

r fo ng

Applies only to PHEV

– High-voltage components and high-voltage cables: inspect for damage and correct routing and securing of lines.

Prote cted by c o p yri gh t. C op yi

•

– Plenum chamber: check for soiling. •

Concluding work

20 2. Service work

Applies only to up!

AG.

Applies only to BEV agen lksw Vo by

Applies only to PHEV

ht rig py Co t.

rrectness of i t to the co nform spec at i h re o n wit in t his

•

Applicable for e-up! only

do c um en

es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

un le

ility ab y li an pt ce

X – Tyre pressure: check. olksw agen AG X – Tyre mobility check for damage and use. AG. Vset: doe agen s no ksw l o t gpattern V X – byTyres: check condition and wear of tyre; enter tread depth. ua d ran ise t r e Motor compartment tho eo ra au c s X – Engine oil: replenish. s X – Oil level: check. X – Battery and, if fitted, second battery: check with battery tester. X – Engine and components in engine compartment: inspect for leaks and damage (from above). X – Brake fluid level (dependent upon brake pad/lining wear): check. X – Cooling system: check anti-freeze protection and coolant level. X – Check cooling system for high-voltage system and also check presence and attachment of tamperproof seal on coolant expansion tank

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 Oil change Inspection service X

X X X X X

Scope of work – – – – –

Service interval display: Reset Headlight adjustment: check and adjust as necessary. Tyre Pressure Loss Indicator: calibrate after tyre pressure has been corrected. Carry out road test. Selective wheel torque control: assessing oil degradation on left and right sides using vehicle diagnostic tester – High-voltage battery: charge. •

– High-voltage battery: charge. •

2.3.3

Applies only to BEV

Service intervals

Scope of work

Oil change service

Climate and traffic con‐ ditions usual for passen‐ ger vehicles operated on fuels compliant with EN 228 or EN 590/EN 15940

For operation with fuels that are »NOT« compliant with standard EN 228 ⇒ page 33 or EN 590/ EN 15940 ⇒ page 32

--AG. Volkswagen AG d agen oes w s k not Vol gu by ara d --e nte is r o eo h ut ra a c s s

QI1 every 5,000 km or 1 year (fixed) 1) QI2 every 7,500 km or 1 year (fixed) 1) --QI3 every 10,000 km or 1 year (fixed) 1) QI4 every 15,000 km or 1 year (fixed) 1) QI6 --max. 30,000 km or 2 years (flexible) 1) QI7 --every 10,000 mi or 1 year (fixed) 1) rrectness of i t to the co nform spec at i h re o n wit in t his

1) Whichever occurs first.

r fo ng

Prote cted by c o p yri gh t. C op yi

1) Whichever occurs first.

Every 20,000 mi or 2 years1)

Every 10,000 km or 1 year1) Applies to vehicles with PR numbers QI1 and QI3.

AG.

Every 30,000 km or 2 years1)

For operation with fuels that are »NOT« compliant with standards EN 228 ⇒ page 33 or EN 590/EN 15940 ⇒ page 32

agen lksw Vo by

Inspec‐ tion

USA

ht rig py Co t.

Scope of Climate and traf‐ work fic conditions usual for passenger vehi‐ cles

do c um en

es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

ility ab y li an pt ce

un le

Applies only to PHEV

Every 15,000 km or 1 year1) Applies to vehicles with PR numbers QI2 and QI4.

2. Service work

olkswagen AG en AG. V does not gu ara nte eo ra c

Air filter

ris tho u a ss

ility ab y li an pt ce

2.3.4

un le

ag Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake ksw 2021 ➤ Vol y b Maintenance - Edition 11.2022 ed

Air filter: clean housing and re‐ new filter element • Applies only to Polo with en‐ gine code CHYB & CHYC and up! with PFI

Every 60,000 km or 4 years 1)

Every 30,000 km or 2 years 1)

Every 90,000 km or 6 years 1)

Every 30,000 km or 2 years 1)

Scope of work

Climate and traffic conditions usu‐ al for passenger vehicles

Countries with high levels of dust ⇒ page 34

Interior filter: clean housing and renew filter element

Every 60,000 km or 2 years 1)

Max. 1 year or 30,000 km 1)

2.3.6

r fo ng

Prote cted by

1) Whichever occurs first.

AG.

Interior filter

agen lksw Vo by

2.3.5

c o p yri gh t . C op yi

1) Whichever occurs first.

ht rig py Co t.

Air filter: clean housing and re‐ new filter element

es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

Countries with high levels of dust ⇒ page 34

Sliding sunroof drains at rear Scope of work

Climate and traffic conditions usu‐ al for passenger vehicles

Countries with high levels of dust ⇒ page 34

Sliding sunroof drains at rear: checking for blockage, cleaning if necessary

Max. 2 years or 30,000 km 1)

Max. 1 year or 15,000 km 1)

Scope of work

Climate and traffic conditions usu‐ al for passenger vehicles

Countries with high levels of dust ⇒ page 34

Toothed belt and camshaft drive tensioning roller: renew. • Applies only to TDI bi-turbo

Every 120,000 km

Toothed belt and camshaft drive tensioning roller: renew. • Applies to all diesel engines with toothed belt

Every 210,000 km

Every 120,000 km

Toothed belt and camshaft drive tensioning roller: renew. • Applies to all petrol engines with toothed belt

---

Every 120,000 km

Toothed belt drive for coolant pump: renew. • Applies to all petrol engines with toothed belt for coolant pump

---

Every 120,000 km

1) Whichever occurs first.

2.3.7

Toothed belt

22 2. Service work

rrectness of i t to the co nform spec at i h re o n wit in t his

Climate and traffic conditions usu‐ al for passenger vehicles

do c um en

Scope of work

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 1) Whichever occurs first.

2.3.8

Poly V-belt Scope of work

Climate and traffic conditions usu‐ al for passenger vehicles

Countries with high levels of dust ⇒ page 34

Poly V-belt: renew Poly V-belt and tensioning roller for belt-driven starter-alternator: renew 1)

--Every 180,000 km

Every 60,000 km Every 60,000 km

Diesel fuel filter

pe rm itte d

un le

2.3.9

Diesel compliant with EN 590/EN 15940

Diesel fuel filter: renewing • Applies only to Touareg

Every 60,000 km

Diesel fuel filter: renewing

Every 90,000 km

Every 30,000 km

Spark plugs

Spark plugs: renew • Applies for all 6-cylin‐ der engines

E100

Every 60,000 km or 4 years 1) Every 90,000 km or 6 years 1)

Every 40,000 km or 4 years 1)

Prote cted by c o py rig ht . C op yi

1) Whichever occurs first.

Petrol engine not compli‐ ant with EN 228 ⇒ page 33

do c um en

r te o iva r rp fo g n

Spark plugs: renew

Petrol engine compliant with EN 228

agen lksw Vo by

Scope of work

AG.

2.3.11

Every 30,000 km

ht rig py Co t.

2.3.10

Diesel not compliant with EN 590/ EN 15940 ⇒ page 32 rrectness of i t to the co nform spec a t i h re o n in wit thi s

es, in part or in w l purpos hole ercia , is n m ot com

Scope of work

ility ab y li an pt ce

1) Engines equipped with a belt-driven AG. Volkswagen AG d are lis‐ agen starter-alternator oes ksw not l o ted in the engine overviewby⇒V page 1 . gu ara d e nte is r o eo h ut ra a c s s

Every 30,000 km / 20,000 km or 2 years 1) and every 15,000 km / 10,000 km or 1 year 1)

Automatic gearbox

Scope of work Automatic gearbox: change ATF.

Climate and traffic condi‐ Countries with hot climate tions usual for passenger ⇒ page 31 vehicles ---

Every 60,000 km

USA Every 80,000 mi

2. Service work

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

Multi-purpose additive Scope of work

Climate and traffic conditions usu‐ al for passenger vehicles

Russia

Multi-purpose additive for diesel fuel: adding Multi-purpose additive for petrol fuel: add

---

At every service.

---

At every service.

2.3.13

Country-specific additional work dependent on time and mileage Scope of work

Interval

Reducing agent (AdBlue®/DEF): replenishing • Only if requested by customer, and as a separate charge

At every service.

Selective wheel torque control: change oil in left and right clutch chambers

Every 60,000 km or 4 years 1) Every 60,000 km

Dual clutch gearbox (DSG) 02E and 0D9: change gear oil and filter. Dual clutch gearboxes (DSG) 0DD, 0DL and 0BH: change gear oil. Dual clutch gearbox (DSG) 0GC: change gear oil. Diesel particulate filter: checking

Every 60,000 km Every 120,000 km At 180,000 km/210,000 km, then every 30,000 km Every 2 years Every 2 years Every 2 years olkswagen AG en AG. V4 years does agEvery n lksw

All-wheel drive coupling: changing oil Brake and clutch system: changing brake fluid Front differential lock: changing oil

ot g ua ran tee or ac

o yV db ir se ho ut a ss

r fo ng

agen lksw Vo by

AG.

Prote cted by

c o p yri gh t . C op yi

24 2. Service work

rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um en

urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d p

ility ab y li an pt ce

un le

Reducing agent (AdBlue®/DEF): changing • Applies only to vehicles driven less than 15,000 km in 4 years

ht rig py Co t.

2.3.12

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

General information

General warnings for working on high-voltage system ⇒ page 25 Raising vehicle with lifting platform or trolley jack ⇒ page 25 Entries in digital service schedule or service schedule ⇒ page 27 . Volkswagen AG does not l o V gu y b page 28 ara d Vehicle data sticker ⇒ nte ise r o eo h t u ra Connecting vehicle diagnostic tester ⇒ page 29 a c s s

n AG 27 Severe operating conditions a⇒gepage ksw

pe rm itte d

un le

ility ab y li an pt ce

Vehicle identification number ⇒ page 30 Countries with hot climate ⇒ page 31 es, in part or in w l purpos hole ercia , is n m ot com

Country overview for petrol not compliant with EN 228 ⇒ page 33 Motor code and motor number ⇒ page 34 Countries with high levels of dust ⇒ page 34 Type plate ⇒ page 35 Shortened intervals for spark plug replacement ⇒ page 35

General warnings for working on highvoltage system

⇒ Rep. gr. 00; Classification of dangers for the high-voltage system

Raising vehicle with lifting platform or trolley jack agen lksw Vo by

c o p yri gh t. C op yi

Safety notes ⇒ page 25

ht rig py Co t.

3.2

do c um en

r te o iva r rp fo g n

3.1

rrectness of i t to the co nform spec a t i h re o n in wit thi s

Country overview for diesel not compliant with EN 590/ EN 15940 ⇒ page 32

Prote cted by

Lifting points for lifting platform and trolley jack ⇒ page 26 AG.

3.2.1

Safety notes

NOTICE Risk of damage to vehicle unless sufficient distance is kept between low-lying vehicle components and lifting platform. – Observe ground clearance of vehicle.

NOTICE Risk of damage to lifting platform if load-carrying capacity is exceeded. – Observe load-carrying capacity of lifting platform. WARNING Risk of injury if motor is started while a gear is engaged and the drive wheels make contact with the ground. – Ensure that there is sufficient distance between the ground and the drive wheels.

3. General information

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

NOTICE Risk of damage to vehicle if it is raised incorrectly. Potential damage to underbody if the vehicle tips over. – Raise vehicle only at specified jacking points.

3.2.2

Lifting points for lifting platform and trolley jack

NOTICE Risk of damage to vehicle if the lifting platform is not used in the correct manner. – Screw support plates of the lifting platform out far enough to ensure sufficient clearance between lifting arm and side member. . Volkswagen AG gen AG does swa – Only position the support beneath the reinforce‐ kplates not l o V gu y b ments of the side member. ara ed

nte eo ra c

agen lksw Vo by

AG.

Prote cted by c o p yri gh t. C op yi

26 3. General information

ht rig py Co t.

– Position support plate in area of side member marking (at vertical reinforcement of floor pan -arrow-).

in t his d o cu m en

r te o iva r rp fo ng

rrectness o f i t to the co n f orm spec atio h re n wit

es, in part or in w l purpos hole ercia , is n m ot com

pe rm itte d

un le

ility ab y li an pt ce

ris ho ut a Front lifting pointss

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

AG. Volkswagen AG d agen oes ksw not l o V gu y b ara d nte ise r o eo h t u ra a c s s

rrectness of i t to the co nform spec at i h re o n wit in t his

– Position support plate in area of side member marking at vertical reinforcement of floor pan -arrow-.

3.3

Entries in digital service schedule or service schedule

•

Therefore it is very important, every time a component is changed, to document this in the service schedule.

•

This also applies to components which were changed before the regular change interval. AG.

Prote cted by

Adverse operating conditions

agen lksw Vo by

c o p yri gh t. C op yi

3.4

ht rig py Co t.

r fo ng

If a component is changed which has a change interval prescri‐ bed by the manufacturer, e.g. the toothed belt, the new change interval begins at the time the component is changed.

do c um en

es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

ility ab y li an pt ce

un le

Rear lifting point

If the vehicle is used under severe operating conditions some work will have to be performed before the next service is due or at shorter service intervals. •

Regular short trips or stop and go operation in urban traffic

•

High percentage of cold starts

•

Vehicle is used in areas with winter temperatures over a long period

•

Regular long periods of idling (e.g. taxis)

•

Vehicle is often driven at full throttle with high payload or whilst towing a trailer

•

Using diesel with elevated sulphur content

•

Regular operation in areas with high levels of dust

•

Countries with generally poor road conditions such as high number of potholes, protrusions, high elevations in the road/ deep “tramlines”.

•

High number of gravel roads with poor surface quality, such as irregularities/bumps, elevations, protruding stones, waves.

•

Subtropical climates (combination of high ambient tempera‐ ture and high air humidity)

3. General information

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

3.5

Vehicle data sticker Note

The vehicle data sticker is discontinued as of model year 2022►.

3.5.1

“Vehicle data sticker”: attaching to service schedule or owner’s manual

In markets with digital service schedules (DSP), the place to paste the vehicle date sticker has moved from the service schedule to the owner's manual.

3.5.2

Vehicle data sticker

AG.

28 3. General information

agen lksw Vo by

Prote cted by c o py rig ht . C op yi

The sticker contains the following data of the vehicle

ht rig py Co t.

r fo ng

The vehicle data sticker -arrow- is located in the luggage com‐ partment on the lock carrier cover. The vehicle data sticker is also found in the service schedule for the customer.

rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um en

urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d p

un le

– Apply the lower of the two vehicle data stickers -arrow- in the service schedule or the owner's manual.

ility ab y li an pt ce

AG. Volkswagen AG d agen oes ksw not l o gu yV b ara d e nte is r o eo h ut ra a c s s

es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

rrectness of i t to the co nform spec at i h re o n wit in t his

1 - Vehicle identification number

AG. Volkswagen AG d agen oes ksw not l o V gu by ara d e nte is r o eo h ut ra a c s s

ility ab y li an pt ce

un le

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

2 - Vehicle type, engine output, gearbox

3 - Engine and gearbox codes, paint number, interior equipment 4 - Optional equipment, PR numbers

The sticker in service schedule or owner's manual includes the same data. The legend can be found below the sticker.

3.6

Connecting vehicle diagnostic tester

♦ During a road test, always secure testing and measuring

equipment on the back seat.

AG.

only with the respective diagnostic cable.

agen lksw Vo by

♦ Ensure that the selected vehicle diagnostic tester is used

do c um en

Note

Prote cted by c o p yri gh t. C op yi

♦

ht rig py Co t.

♦ Vehicle diagnostic tester

r fo ng

Special tools and workshop equipment required

♦ Only a passenger may operate these devices while the vehi‐

cle is in motion.

3. General information

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

AG. Volkswagen AG d agen oes ksw not l o V gu by ara d e nte is r o eo h ut ra a c s s

ility ab y li an pt ce

un le

Procedure

pe rm itte d

– Fit diagnosis interface -2- on diagnostic connection.

rrectness of i t to the co nform spec a t i h re o n in wit thi s

– Switch on ignition.

es, in part or in w l purpos hole ercia , is n m ot com

– Switch on vehicle diagnostic tester -1-. Now follow instructions on screen in order to start desired func‐ tions.

3.7

Vehicle identification number

♦ Vehicle identification number on lower edge of windscreen ⇒ page 30 ♦ Vehicle identification number on extension of longitudinal member ⇒ page 30 ♦ Significance of vehicle identification number ⇒ page 31 r te o iva r rp fo g n

Vehicle identification number on exten‐ sion of longitudinal member

The vehicle identification number is located on the extension of longitudinal member -arrow-.

30 3. General information

AG.

3.7.2

agen lksw Vo by

Prote cted by c o p yri gh t. C op yi

The vehicle identification number (chassis number) -arrow- is located on the left-hand side of the vehicle in the windscreen near the wiper mounting. It is visible from the outside.

do c um en

Vehicle identification number on lower edge of windscreen ht rig py Co t.

3.7.1

pe rm itte d

Significance of vehicle identification number ZZZ

Manufacturer Filler charac‐ code ters

3.8

Model

Filler charac‐ ters

Model year 2018

rrectness o f i t to the co n f orm spec atio h re n wit

WVW

000 234

Production lo‐ Serial number cation

Countries with hot climate

♦ Countries with hot and super hot climates have elevated peak temperatures (50°C) compared with the European average (25°C).

agen lksw Vo by

AG.

Prote cted by c o py rig ht . C op yi

Abu Dhabi Algeria Egypt Afghanistan Bahrain Burkina Faso China Dubai Djibouti Eritrea Guinea Guinea-Bissau Iran India Iraq Israel Yemen Jordan

Lebanon Libya Mexico Morocco Niger Oman Puerto Rico Palestine Pakistan Saudi Arabia South Sudan Sierra Leone Somalia Syria Chad Tunisia Togo USA United Arab Emirates

ht rig py Co t.

r te o iva r rp fo ng

♦ Locally high ambient temperatures have an influence on the longevity of the motor, gearbox and coolant circuit, such as journeys uphill and at higher speeds as well as start/stop operation.

in t his d o cu m en

es, in part or in w l purpos hole ercia , is n m ot com

3.7.3

AG. Volkswagen AG d agen oes ksw not l o gu yV b ara d e nte is r o eo h ut ra a c s s

ility ab y li an pt ce

un le

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

3. General information

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 Kuwait Cameroon Qatar

G do es n ot g ua ran tee or ac

pe rm itte d

un le

Country overview for diesel not compli‐ ant with EN 590/EN 15940

ility ab y li an pt ce

3.9

agen ksw Vol y b ed ris o h t au ss

West Sahara Central African Republic AG. Volkswagen A

es, in part or in w l purpos hole ercia , is n m ot com

rrectness of i t to the co nform spec a t i h re o n in wit thi s

Examples in fuel inadequacies that can lead to shortened main‐ tenance / exchange intervals: ♦ High sulphur content

♦ Elevated amount of biodiesel ♦ Contaminants in diesel

♦ Elevated amount of water in diesel

AG.

r te o iva r rp fo g n

Prote cted by

32 3. General information

Mauritius Macedonia Mexico Moldova Mongolia Mozambique Myanmar Namibia Nepal New Caledonia Nicaragua Dutch Overseas Territo‐ ries Niger Nigeria North Korea Oman

agen lksw Vo by

Burkina Faso Burundi Cayman Islands China Costa Rica Democratic Republic of the Congo Djibouti Dominican Republic Dubai Ecuador

Guinea-Bissau Guyana Haiti Honduras India Indonesia Iraq Iran Jamaica Yemen Jordan Cambodia

c o p yri gh t. C op yi

Bolivia Botswana Brazil Brunei

Malawi Malaysia Mali Morocco Mauritania

Sierra Leone Zimbabwe Singapore Somalia Sri Lanka and the Mal‐ dives South Africa Sudan South Sudan Surinam Swaziland Syria Tajikistan Tanzania Thailand Togo Trinidad and Tobago Chad do c um en

Equatorial Guinea Argentina Armenia Azerbaijan Ethiopia Bahamas Bahrain Bangladesh Belize Benin Bermudas Bhutan

Gambia Georgia Ghana Guatemala Guinea

ht rig py Co t.

Abu Dhabi Afghanistan Egypt Algeria Angola

Cameroon Canada Cape Verde Caribbean driving on the left Kazakhstan Qatar Kenya Kyrgyz Republic Columbia Cuba

Tunisia Turkey Turkmenistan Uganda

Pakistan Panama Papua New Guinea Paraguay Peru Philippines

Ukraine Uruguay USA Uzbekistan Venezuela United Arab Emirates

Kuwait Laos Lesotho Lebanon

Puerto Rico Republic of Congo Rwanda Russia

Vietnam West Sahara Central African Republic Ivory Coast

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 El Salvador Eritrea Fiji Gabon

Zambia Saudi Arabia Senegal Seychelles

South Africa

AG. Volkswagen AG d agen oes ksw not l o V gu y b ara d nte ise r o eo h t u ra a c s s

ility ab y li an pt ce

Country overview for petrol not compli‐ ant with EN 228 un le

3.10

Liberia Libya Macao Madagascar

pe rm itte d

Examples in fuel inadequacies that can lead to shortened main‐ tenance / exchange intervals: es, in part or in w l purpos hole ercia , is n m ot com

♦ High sulphur content

♦ Poor boiling point / evaporation ♦ Metallic components / Octane Booster Additive

r te o iva r rp fo g n

Tanzania Thailand Togo Trinidad and Tobago Chad Tunisia Turkey

do c um en

Mongolia Mozambique Myanmar (Burma) Nepal (Indian subconti‐ nent) Angola Guinea-Bissau New Caledonia Equatorial Guinea Haiti Nicaragua Armenia Honduras Dutch Overseas Territo‐ ries Azerbaijan Indonesia Niger Ethiopia Iraq Nigeria Bahamas Iran North Korea Bahrain Jamaica Oman Bangladesh Yemen Pakistan Belize Jordan Panama Benin (Dahomey) Cameroon Papua New Guinea Bermudas Cape Verde Paraguay Bhutan Caribbean, left-hand traf‐ Peru fic Bolivia Kazakhstan Philippines Brunei Qatar Republic of Congo Burkina Faso (Upper Vol‐ Kenya Rwanda ta) Burundi Kyrgyz Republic Russian Federation Chile Columbia Zambia China Cuba Saudi Arabia Costa Rica Kuwait Senegal Democratic Republic of Laos Seychelles the Congo Djibouti Lebanon Sierra Leone Dominican Republic Liberia Singapore Dubai Madagascar Somalia Ecuador Malawi Sri Lanka

Turkmenistan Uganda Ukraine Uruguay Uzbekistan Venezuela United Arab Emirates Vietnam West Sahara

agen lksw Vo by

Georgia Ghana Guatemala Guinea

AG.

Prote cted by

c o p yri gh t. C op yi

Abu Dhabi Afghanistan Egypt Algeria

ht rig py Co t.

♦ Contaminants in petrol

rrectness of i t to the co nform spec a t i h re o n in wit thi s

♦ Petrol contaminated with diesel

Central African Republic Macao Libya Cayman Islands Guyana Cambodia

3. General information

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 El Salvador Ivory Coast Eritrea Fiji Gabon Gambia

3.11

Maldives Mali Morocco Mauritania Mauritius Mexico

South Sudan Zimbabwe Sudan Suriname Syria Tajikistan

Motor code and motor number

Engine code and engine number are located: ♦ On vehicle data sticker ♦ On type plate Or ⇒ Rep. gr. 00; Identification; Engine number, engine data

n AG. Volkswagen AG do es n wage s k l ot g o yV ua b d ran ir se tee o h t or High dust content in the air due to road and environmental u ac a ss conditions.

3.12

ility ab y li an pt ce

un le

♦

Countries with high levels of dust

Prote cted by

Panama Papua New Guinea Paraguay

AG.

34 3. General information

r fo ng

Kenya Kyrgyz Republic Columbia

Somalia Sri Lanka Seychelles South Sudan Sudan Suriname Swaziland Syria Tajikistan Tanzania Thailand Togo Chad Tunisia agen lksw Vo by

Yemen Jordan Cambodia Cameroon Cape Verde Kazakhstan Qatar

c o p yri gh t . C op yi

Benin (Dahomey) Bhutan Bolivia Botswana Brazil Brunei Burkina Faso (Upper Vol‐ ta) Chile China Costa Rica

Macau Madagascar Malawi Maldives Mali Morocco Mauritania Mauritius Mexico Mongolia Mozambique Myanmar (Burma) Namibia Nepal (Indian subconti‐ nent) Nicaragua Niger Nigeria North Korea Oman Pakistan Palestine

ht rig py Co t.

Gabon Gambia Georgia Ghana Guatemala Guinea Guinea-Bissau Guyana Honduras Hong Kong India Indonesia Iraq Israel

rrectness of i t to the co nform spec at i h re o n wit in t his

Abu Dhabi Afghanistan Egypt Algeria Angola Equatorial Guinea Argentina Armenia Azerbaijan Ethiopia Australia Bahrain Bangladesh Belize

do c um en

es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

♦ Dust is categorised according to particle size or type of dust (organic and inorganic material) such as e.g. pollen, bacte‐ ria, fungal spores or rock dust, mineral fibres.

Turkey Turkmenistan Uganda Uruguay Ukraine Uzbekistan Venezuela United Arab Emirates Vietnam West Sahara

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 Democratic Republic of the Congo Djibouti Dominican Republic Dubai Ecuador El Salvador Ivory Coast Eritrea French Guyana Fiji

3.13

Cuba

Peru

Central African Republic

Kuwait Laos Lesotho Lebanon Liberia Libya Philippines Burundi

Puerto Rico Rwanda Russian Federation Zambia Saudi Arabia Senegal Sierra Leone Zimbabwe South Africa

Identification plate Note

Vehicles for some countries have no type plate.

n AG. Volkswagen AG do es n wage s k l ot g o yV ua b d ran ir se tee o h t or u ac a ss

rrectness of i t to the co nform spec at i h re o n wit in t his

es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

ility ab y li an pt ce

un le

Owing to legal requirements, the type plate -arrow- is located in the lower area of the B-pillar, after opening either the right or the left front door.

The type plate includes the following vehicle data: A - Vehicle identification number B - Variable indications e.g. axle loads, gross vehicle weight rating, gross combination weight C - Model identification number D - Engine code

r fo ng

Shortened spark plug replacement intervals are necessary if fuel not compliant with DIN EN 228 are used.

AG.

Prote cted by

♦ Petrol contaminated with diesel

agen lksw Vo by

c o p yri gh t . C op yi

Examples in fuel inadequacies that can lead to shortened main‐ tenance / exchange intervals:

do c um en

Shortened intervals for spark plug re‐ placement ht rig py Co t.

3.14

♦ High sulphur content ♦ Poor boiling point / evaporation

3. General information

36 3. General information

un le

pe rm itte d

X X X X X

X X X X

10,000 km /1 year

X X X

r te o iva r rp fo ng

X X X

AG.

Afghanistan Egypt Algeria Angola Equatorial Guinea Armenia Azerbaijan Ethiopia Bahamas Bahrain Bangladesh Belize Benin (Dahomey) Bermudas Bhutan Bolivia Brunei Burkina Faso (Up‐ per Volta) Burundi Chile China Costa Rica Democratic Repub‐ lic of the Congo Djibouti Dominican Republic Dubai Ecuador El Salvador Ivory Coast Eritrea Fiji Gabon Gambia Georgia Ghana Guatemala Guinea Guinea-Bissau Guyana Haiti Honduras

Prote cted by c o py rig ht . C op yi

Abu Dhabi

15,000 km /1 year

X X X X X X X X X X X X X X X X X X X X X X X X

in t his d o cu m en

es, in part or in w l purpos hole ercia , is n m ot com

30,000 km / 2 years 20,000 km / 2 years

rrectness o f i t to the co n f orm spec atio h re n wit

Country

agen lksw Vo by

♦ Contaminants in petrol

ht rig py Co t.

♦ Metallic components / Octane Booster Additive

ility ab y li an pt ce

AG. Volkswagen AG d agen oes ksw not l o gu yV b ara d e nte s i r Arteon 2018 ➤, Arteon 2021 ➤, Arteon ShootinghBrake 2021 ➤ o eo t u ra a Maintenance - Edition 11.2022 c s s

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 30,000 km / 2. Vyears olkswag 20,000 km / 2 years

n AG wage X olks V y db e X ris tho au

X X X

X X

X X X X X X

AG.

un le

r fo ng

10,000 km /1 year

rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um en

urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d p

X X X X

15,000 km /1 year

ility ab y li an pt ce

Iraq Iran ss Jamaica Yemen Jordan Cambodia Cameroon Cape Verde Caribbean, left-hand traffic Kazakhstan Qatar Kenya Kyrgyz Republic Columbia Cuba Kuwait Laos Lebanon Liberia Libya Macao Madagascar Malawi Maldives Mali Morocco Mauritania Mauritius Mexico Mongolia Mozambique Myanmar (Burma) Nepal (Indian sub‐ continent) Nicaragua Netherlands over‐ seas territories Ar‐ uba, Curacao, SintMaarten (Dutch) Niger Nigeria North Korea Oman Pakistan Panama

agen lksw Vo by

Indonesia

en AG does not gu ara nte eo ra c

ht rig py Co t.

Country

X X X X

Prote cted by c o py rig ht . C op yi

X X X X X X X X X X X X

X X X X X X 3. General information

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

un le

urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d p

X X X

r fo ng

AG.

X agen lksw Vo by

X X

rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um en

38 3. General information

b ed ris o h t au

ility ab y li an pt ce

Paraguay Peru Philippines Republic of Congo Rwanda Russian Federation Zambia Saudi Arabia Senegal Seychelles Sierra Leone Singapore Somalia Sri Lanka South Sudan Sudan Suriname Syria Tajikistan Tanzania Thailand Togo Trinidad and Toba‐ go Chad Tunisia Turkey Turkmenistan Uganda Ukraine Uruguay Uzbekistan Venezuela United Arab Emi‐ rates Vietnam West Sahara Central African Re‐ public Zimbabwe

X X X X

Prote cted by c o p yri gh t. C op yi

Papua New Guinea

n AG. Volkswagen AG do es n wage ot/1 15,000 km 10,000 km /1 year guyear ara nte eo ra c

olks km / 2 years 30,000 km / 2 years 20,000 yV

ht rig py Co t.

Country

X X X

X X

X X X X X X X X X X X X X X X

AG. Volkswagen AG d agen oes ksw not l o V gu y b ara d nte ise r o eo h t u ra a c s s

do c um en

ht rig py Co t.

r fo ng

rrectness of i t to the co nform spec at i h re o n wit in t his

es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

ility ab y li an pt ce

un le

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

agen lksw Vo by

4. Descriptions of work

AG.

Prote cted by

c o p yri gh t. C op yi

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ . Volkswagen AG Maintenance - Edition 11.2022 gen AG does swa

k Vol by d e ris tho u a Swivel joints and axle mountings: inspecting ⇒ page 42ss

Descriptions of work

ility ab y li an pt ce

pe rm itte d

All-wheel drive coupling: changing oil ⇒ page 44

un le

not gu ara nte eo ra c

rrectness o f i t to the co n f orm spec atio h re n wit

es, in part or in w l purpos hole ercia , is n m ot com

Automatic headlight control and static cornering light: checking function ⇒ page 48 Automatic gearbox 09P: changing ATF ⇒ page 49 Battery (12 V): checking battery terminal clamps for secure seating ⇒ page 49 Battery (12 V): checking with battery tester (always refer to workshop manual) ⇒ page 53 Battery (12V): checking (applies only to Arteon eHybrid) ⇒ page 53 Status of battery (12 V): reading - sending diagnosis protocol via online connection ⇒ page 54 r te o iva r rp fo ng

Tyres: checking condition, wear pattern, tyre pressure and tread depth ⇒ page 55

Diesel fuel filter: draining ⇒ page 79 Diesel fuel filter: renewing ⇒ page 79 Diesel particulate filter: checking ⇒ page 81 Dual clutch gearbox 0D9: changing gear oil and filter ⇒ page 81 Dual clutch gearbox 0DL: changing gear oil ⇒ page 82 Dual clutch gearbox 0GC: changing gear oil ⇒ page 82 Window regulators: checking positioning (open and close func‐ tions) ⇒ page 82 Fault memories of all systems: reading with vehicle diagnostic tester and correcting possible faults according to repair guide‐ lines ⇒ page 82 Protective bellows: inspecting ⇒ page 83 Head-up Display (HUD): removing protective film ⇒ page 83 High-voltage battery: checking charge level ⇒ page 83 Maintenance of high-voltage battery ⇒ page 84 High-voltage battery: charging ⇒ page 84 Hybrid components: inspecting for damage to high-voltage com‐ ponents and wires ⇒ page 84 Interior filter: cleaning housing and renewing filter element ⇒ page 156 Interior and exterior body: inspecting for corrosion when doors and flaps are open ⇒ page 85

40 4. Descriptions of work

Prote cted by

Brakes, front and rear: checking thickness of brake pads and condition of brake discs ⇒ page 76

AG.

Brake fluid level: checking ⇒ page 74

agen lksw Vo by

c o p yri gh t . C op yi

Brake system and shock absorbers: inspecting for leaks and damage ⇒ page 73

ht rig py Co t.

Brake and clutch system: changing brake fluid ⇒ page 67

in t his d o cu m en

Front passenger airbag: checking key switch and “ON/OFF function” ⇒ page 54

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 n AG. Volkswagen AG do es n wage s k l ot g o yV ua b d 85 ran Poly V-belt: checking condition ⇒ page ir se tee o h t or u Cooling system: checking anti-freeze protection and coolant lev‐ ac a s s el ⇒ page 87

Poly V-belt: renewing ⇒ page 85

un le

ility ab y li an pt ce

es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

Cooling system for high-voltage system: checking freeze pro‐ tection and coolant level ⇒ page 91

rrectness of i t to the co nform spec at i h re o n wit in t his

Air filter: cleaning housing and renewing filter element ⇒ page 94 Multi-purpose additive for diesel fuel: adding ⇒ page 102 Multi-purpose additive for petrol fuels: adding ⇒ page 104 Motor and components in motor compartment: inspecting for leaks and damage (from above and below) ⇒ page 106 Engine cover panel “top”: removing and installing ⇒ page 107 Engine data plate with Certification Test Group code: checking if fitted and for condition, also checking CTG codes against the code in the engine control unit ⇒ page 109 Motor compartment cover (noise insulation) “bottom”: removing and installing ⇒ page 110 r fo ng

AG.

Prote cted by

Engine oil: capacities and specifications as of model year 2021► ⇒ page 123

agen lksw Vo by

c o p yri gh t . C op yi

Engine oil: capacities and specifications up to model year ►2020 ⇒ page 122

ht rig py Co t.

Engine oil: draining, renewing oil filter and replenishing engine oil ⇒ page 111

do c um en

Oil level: checking ⇒ page 110

Panoramic sliding roof ⇒ page 125 Road test (performance, handling, noises, air conditioner etc.): carrying out ⇒ page 132 Wheel securing bolts: tightening to specified torque ⇒ page 132 Reducing agent (AdBlue®/DEF): replenishing ⇒ page 133 Reducing agent (AdBlue®/DEF): changing ⇒ page 137 Tyre Pressure Loss Indicator: calibrating ⇒ page 137 Tyre repair set: checking ⇒ page 138 Window wash/wipe system and headlight washer system: checking function ⇒ page 139 Headlight adjustment: checking LED headlights with cornering light ⇒ page 143 Headlight adjustment: checking LED headlights ⇒ page 149 Sliding sunroof drains at rear: checking for blockage, cleaning if necessary ⇒ page 152 Service interval display: resetting ⇒ page 153 Service interval display: recoding ⇒ page 154 Track rods: checking clearance, attachment and boots ⇒ page 155 Selective wheel torque control: change oil in left and right clutch chambers, and reset oil learnt values using vehicle diagnostic tester ⇒ page 156

4. Descriptions of work

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 Selective wheel torque control: assess oil degradation on left and right sides using vehicle diagnostic tester ⇒ page 156 Transportation mode: switching off ⇒ page 157 Transportation devices: removing blocking pieces ⇒ page 157 Clock and date: setting ⇒ page 159 Underbody: inspecting for damage to underbody sealant, un‐ derbody panels, routing of lines, plugs ⇒ page 159 Warning stickers Arteon eHybrid: checking ⇒ page 159 Toothed belt: renewing (petrol engines) ⇒ page 160 Camshaft drive toothed belt: renewing (diesel engines) ⇒ page 160 Spark plugs: renewing ⇒ page 160

4.1

Swivel joints and suspension link mountings:geinspecting n AG. Volkswagen AG d a lksw

oes no

th au ss

or ac

r fo ng

ht rig py Co t.

agen lksw Vo by

AG.

Prote cted by

c o p yri gh t . C op yi

– Check lower axle mountings for large cracks, perforating cracks or cuts in rubber material -arrows-.

42 4. Descriptions of work

rrectness of i t to the co nform spec at i h re o n wit in t his

– Check lower axle mountings for large cracks, perforating cracks or cuts in rubber material -arrows-.

do c um en

es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

ility ab y li an pt ce

un le

o t gu and yV – Check boots -arrowof lower swivel joints for leaks ara db nte damage. orise e

un le

– Check axle mountings also for following damage: ♦ Complete separation of rubber and metal parts.

♦ Superficial cracks and cuts as well as minor separations of

the rubber element from the metal part do not significantly affect the operation of the elasto-kinematic mounting and do not constitute a basis for a complaint.

agen lksw Vo by

Prote cted by c o py rig ht . C op yi

Note

ht rig py Co t.

r fo ng

♦ Large play between mounting and suspension link, which has a considerably negative effect on the function of the mounting.

rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um en

urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d p

ility ab y li an pt ce

AG. Volkswagen AG d agen oes ksw not l o gu yV b ar d e is Arteon 2018 ➤, Arteon 2021 ➤, ArteonanShooting tee r Brake 2021 ➤ o h or ut ac - Edition 11.2022 a Maintenance s s

AG.

♦ Damage to the thin rubber skin over cavities due to con‐

struction is also permissible.

♦ Play between bearing and axle component is permissible as

long as there is no negative effect on the function of the bearing.

4. Descriptions of work

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

4.2

All-wheel drive coupling: changing oil Note

♦ On vehicles with all-wheel drive coupling the drain plugs and

sealing plugs of both systems are often interchanged ow‐ ing to the integrated housing construction of all-wheel drive coupling and final drive. Caution must be exercised during maintenance and servicing as incorrect fitting can cause the all-wheel drive coupling and the final drive to fail.

♦ The all-wheel drive coupling and the final drive are one sys‐

AG. Volkswagen AG d agen oes ksw not l o V gu by ara d e nte is r o eo h ut ra a c s s

pe rm itte d

♦ -1- Sealing plug for filler hole of all-wheel drive coupling oil ♦ -2- Drain plug for all-wheel drive coupling oil

rrectness o f i t to the co n f orm spec atio h re n wit

es, in part or in w l purpos hole ercia , is n m ot com

♦ -3- Sealing plug for gear oil filler hole

ility ab y li an pt ce

un le

tem with separate oil systems.

♦ -4- Drain plug for gear oil Special tools and workshop equipment required

agen lksw Vo by

Prote cted by c o p yri gh t. C op yi

AG.

44 4. Descriptions of work

ht rig py Co t.

♦ Torque wrench

in t his d o cu m en

r te o iva r rp fo ng

♦ Temperature gauge -VAS 6519-

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 ♦ Used oil collector and extractor -VAS 6622A-

♦ -VAS 6291 A-

AG. Volkswagen AG d agen oes ksw not l o V gu y b ara d nte ise r o eo h t u ra a c s s

Draining oil

rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um en

urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d p

ility ab y li an pt ce

un le

♦ Drip tray for workshop hoist -VAS 6208-

ht rig py Co t.

r fo ng

– Raise vehicle on lifting platform and place used oil collection and extraction unit -VAS 6622A- under all-wheel drive cou‐ pling. c o p yri gh t. C op yi

– Unscrew oil drain plug -2- and drain high performance oil completely. 4. Descriptions of work

agen lksw Vo by

AG.

Prote cted by

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 – Screw in new oil drain plug with new seal and tighten it to specified torque. Oil drain plug is fitted with captive seal. Specified torque

Oil drain plug

rrectness of i t to the co nform spec a t i h re o n in wit thi s

es, in part or in w l purpos hole ercia , is n m ot com

pe rm itte d

ility ab y li an pt ce

un le

Filling with oil

n AG. Volkswagen AG do es n wage s k l ot g o yV ua b d ran ir se tee o h t or u ac a ss

ht rig py Co t.

agen lksw Vo by

AG.

Prote cted by

c o p yri gh t . C op yi

– Separate angled piece -B- from adapter -A- and screw adapter fully into oil filler hole. – Refit angled piece again and route hose above drive shaft to prevent sagging. – Place drip tray for workshop hoist -VAS 6208- under final drive. – Once hose above rear left wheel has been moved away from vehicle, vehicle can be lowered. Note ♦ The prescribed temperature range for oil during oil level

check is 20°C to 40°C.

♦ Observe the temperature of oil container when topping up

oil.

♦ After topping up oil, the temperature gauge -VAS 6519- can

be used for measuring oil temperature.

46 4. Descriptions of work

do c um en

r te o iva r rp fo g n

– Unscrew oil filler plug -1-.

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 Oil capacity and oil specification ⇒ page 48

– Screw oil container -A- onto charging device -VAS 6291 Awith valve closed -arrow-. – Open valve -arrow- and hold oil tank as shown in diagram. – Fill enough oil in system with charging device -VAS 6291 A- until it starts to escape between adapter and gearbox housing. – Remove filling device -VAS 6291 A-. – Unscrew adapter -A-.

AG. Volkswagen AG d agen oes ksw not l o gu yV b ara d e nte is r o eo h ut ra a c s s

rrectness of i t to the co nform spec at i h re o n wit in t his

The oil level is correct if oil is dripping out of the oil filler hole.

agen lksw Vo by

AG.

Oil filler plug

Prote cted by c o py rig ht . C op yi

Specified torque

ht rig py Co t.

r fo ng

– Screw in new oil filler plug -arrow- with captive seal and tighten it to specified torque.

do c um en

es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

ility ab y li an pt ce

un le

– Let any excess oil flow out until it is only dripping out of hole.

Nm 15

4. Descriptions of work

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 Ensure adherence to prescribed temperature range during oil level check if oil temperature was not within prescribed temper‐ ature range of 20 °C to 40 °C when topping up oil. The oil temperature can be measured using temperature gauge . Volkswagen AG gen AG does -VAS 6519-. a w ks not g

ol yV

un le

ility ab y li an pt ce

ua d b is not between 20 and 40°C, adherence ran If the oil temperature ise tee or to prescribedthtemperature range must be ensured by running or u ac a gearbox warm or allowing it to cool down. ss es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

Oil capacity and oil specification

4.3

Automatic headlight control and static cornering light: checking function

Note

The automatic headlight control was formerly called driving light assist.

•

Vehicle must be in natural daylight. r fo ng

ht rig py Co t.

– Turn light switch -4- to position “Auto” -2-. agen lksw Vo by

AG.

Prote cted by c o py rig ht . C op yi

The headlights may not light in brightness.

The rain and light sensor is located centrally at top of wind‐ screen -arrow-.

48 4. Descriptions of work

do c um en

– Switch on ignition.

rrectness of i t to the co nform spec at i h re o n wit in t his

Oil capacity, 4MO‐ ⇒ Rear propshaft and final drive; Rep. gr. 00; Technical data; Capacities TION Oil specifications ⇒ Electronic parts catalogue (ETKA)

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 – Switch on ignition. AG. Volkswagen AG d agen oes ksw not l o V gu y b your hand ara d – Cover light/rain sensor -arrow- from outside iswith e nte r o eo or a suitable object. h t u ra a c s This measures the light incidence and thes headlights are

– Turn light switch -4- to position “Auto” -2-.

– Turn light switch -4- to position “0” -1- and switch off ignition.

r fo ng

Note

AG.

Prote cted by

The static cornering light is integrated in the headlights.

agen lksw Vo by

c o p yri gh t. C op yi

The static cornering light is deactivated when “ECO” is selected as the driving mode.

ht rig py Co t.

Static cornering light

rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um en

urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d p

un le

ility ab y li an pt ce

switched on.

– Start the engine. – Switch on dipped headlight. – Switch on turn signal. – Check cornering light. – Repeat procedure on other side.

4.4

Automatic gearbox 09P: changing ATF

– ⇒ Automatic gearbox 09P – 8-speed; Rep. gr. 37; ATF; Draining and filling ATF

4.5

Battery (12 V): checking battery termi‐ nal clamps for secure seating

4.5.1

12 V battery in engine compartment: checking battery terminal clamp for firm seating

Special tools and workshop equipment required ♦ Torque wrench

4. Descriptions of work

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 Note ♦ A securely seated battery terminal clamp ensures trouble

free function and long service life of the battery.

♦ When securing terminal clamp, ensure that it is completely

seated on battery terminal. NOTICE

The battery clamp on the positive terminal is not firmly attach‐ ed. Potential short circuit or sparks. – First, always disconnect the battery earth strap from the battery negative terminal.

AG. Volkswagen AG d agen oes ksw not l o gu yV b ara d e nte is r o eo h ut ra a c s s

rrectness of i t to the co nform spec a t i h re o n in wit thi s

es, in part or in w l purpos hole ercia , is n m ot com

pe rm itte d

ility ab y li an pt ce

un le

– Open cover of heat shield sleeve -4-.

– Open cover -4- over battery negative terminal. ht rig py Co t.

agen lksw Vo by

AG.

Prote cted by c o py rig ht . C op yi

50 4. Descriptions of work

do c um en

r te o iva r rp fo g n

– Check battery -3- for secure seating. If necessary, retighten bolt -2- to specified torque.

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

– Check battery terminal clamps -1- and -5- for secure seating. If necessary, retighten nuts -2- and -6-. Specified torque

Nut for battery terminal Bolt for securing bracket

6 15

Carry out following procedures after connecting battery: Procedure AG. Volkswagen AG ⇒ Electrical system; Rep. gr. 27; Battery; and gen Disconnecting does swa k not l o connecting battery V gu y b ed ris o th au

rrectness o f i t to the co n f orm spec atio h re n wit

pe rm itte d

♦ Torque wrench Note

♦ A securely seated battery terminal clamp ensures trouble

free function and long service life of the battery.

♦ When securing terminal clamp, ensure that it is completely

seated on battery terminal. NOTICE

r te o iva r rp fo ng

Prote cted by c o py rig ht . C op yi

– Open service flap in left luggage compartment side trim.

ht rig py Co t.

The battery clamp on the positive terminal is not firmly attach‐ ed. Potential short circuit or sparks. – First, always disconnect the battery earth strap from the battery negative terminal.

in t his d o cu m en

es, in part or in w l purpos hole ercia , is n m ot com

Special tools and workshop equipment required

or ac ility ab y li an pt ce

12 V battery in luggage compartment: ss battery terminal clamp for checking firm seating un le

4.5.2

ara nte e

4. Descriptions of work

agen lksw Vo by

AG.

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

AG. Volkswagen AG d agen oes ksw not l o V gu by ara d e nte is r o eo h ut ra a c s s

es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

ility ab y li an pt ce

– Open cover -5- over battery negative terminal.

r fo ng

rrectness of i t to the co nform spec at i h re o n wit in t his do c um en

agen lksw Vo by

AG.

Prote cted by c o p yri gh t. C op yi

– If fitted, open cover over battery positive terminal.

ht rig py Co t.

un le

– Check battery -4- for firm seating. If necessary, retighten bolt -1- to specified torque.

– Check battery terminal clamps -1- and -3- for secure seating. If necessary, retighten nuts -2- and -4-. Specified torque

Nut for battery terminal Bolt for securing bracket

6 15

Carry out following procedures after connecting battery: Procedure ⇒ Electrical system; Rep. gr. 27; Battery; Disconnecting and connecting battery

52 4. Descriptions of work

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

4.6

Battery (12 V): checking with battery agen AG AG. Volksw tester (always refer todoeworkshop man‐ agen s no ksw l o t gu V ual) y ar db an te

e ris

un le

ility ab y li an pt ce

tho The following are measures to be carried out during ae obattery ra au c s inspection within the scope of maintenance. s urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d p

Procedure Visual check.

Check whether colour indicator is “3-colour” or “2-colour”. Does not apply to AGM batteries.

Battery check using battery tester with printer -VAS 6161-.

Depending on the result of the battery test, “perform cur‐ rent draw test” (charged separately).

rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um en

⇒ Electrical system, General information; Rep. gr. 27; Checking battery

4.7

Battery (12V): checking (applies only to Arteon eHybrid)

Use only vehicle diagnostic tester to check battery on Arteon eHybrid models.

Test and adjustment conditions Charge level (SOC) of battery ≥80%.

•

Visual check carried out.

•

Battery terminal clamps checked for secure seating. agen lksw Vo by

AG.

Prote cted by c o p yri gh t. C op yi

Procedure

ht rig py Co t.

r fo ng

•

– Visually inspect condition of exterior, connections, firm seat‐ ing, plugs of gas vents (negative terminal side open and positive terminal side closed) and electrolyte level indicator of battery. – If electrolyte level is too low (indicator »clear/light yellow«), renew battery. – Battery (12V): check battery terminal clamp for secure seat‐ ing. – Connect vehicle diagnostic tester ⇒ page 29 . – Determine charge level (SOC). Determining charge level (SOC), version 1 ♦ Select tab “Special functions” ♦ Select »Service work« ♦ Select »Assess charge level« Determining charge level (SOC), version 2 ♦ Select »My test« ♦ Select »12-V electrical system« or »Service work« ♦ Select »Assess charge level« – If charge level of 12V battery <80%, charge battery with ex‐ ternal battery charger ⇒ Electrical system; Rep. gr. 27; Bat‐ tery; Charging battery or charge 12V battery via high-voltage battery. – If charge level of battery ≥80%, check battery with Vehicle diagnostic tester. 4. Descriptions of work

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 Battery check, version 1 ♦ Select tab “Special functions” ♦ Select »Service work« ♦ Select »Perform battery check« Battery check, version 2 ♦ Select »My test« ♦ Select »12-V electrical system« or »Service work« ♦ Select »Perform battery check«

4.8

Status of battery (12 V): reading sending diagnosis protocol via online connection

Procedure

The battery status is read while the transportation mode is be‐ ing switched off ⇒ page 157 .

4.9

Front passenger front airbag: checking key switch and “ON/OFF function” Note

The “PASSENGER AIRBAG ON/OFF” switch is located in the dashboard on the front passenger side. Front passenger front airbag: checking key switch and “ON/OFF function”.

54 4. Descriptions of work

AG.

– Warning lamp “PASSENGER AIRBAG OFF” -arrow- must also light up after self-test (passenger airbag deactivated).

agen lksw Vo by

Prote cted by c o py rig ht . C op yi

– Switch on ignition.

ht rig py Co t.

r fo ng

– Using ignition key, turn switch to position “PASSENGER AIRBAG OFF”.

rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um en

urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d p

un le

system

ility ab y li an pt ce

AG. Volkswagen AG d agen oes ksw not l o gu yV b ara Note d e nte is r o eo h ut ra a c s Applies only to vehicles with start/stop and energy recovery s

AG. Volkswagen AG d agen oes ksw not l o V gu y b ara d nte ise r o eo h t u ra a c s s

rrectness o f i t to the co n f orm spec atio h re n wit

– Switch off ignition.

agen lksw Vo by

AG.

Prote cted by

c o p yri gh t. C op yi

– Switch on ignition.

ht rig py Co t.

r te o iva r rp fo ng

– Using the ignition key, turn switch to position “PASSENGER AIRBAG ON”.

in t his d o cu m en

es, in part or in w l purpos hole ercia , is n m ot com

pe rm itte d

ility ab y li an pt ce

un le

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

– Warning lamp “PASSENGER AIRBAG OFF” -arrow- goes out after self-test (passenger airbag activated).

– Switch off ignition.

4.10

Tyres: checking condition, wear pat‐ tern, tyre pressure and tread depth

Checking condition of tyre ⇒ page 56 . Checking wear pattern ⇒ page 56 Tread depth (including spare wheel): check ⇒ page 57 . General notes ⇒ page 57 Tyre pressures, Arteon ⇒ page 59 . Special tools and workshop equipment required

4. Descriptions of work

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

Tyres: checking condition

rrectness of i t to the co nform spec at i h re o n wit in t his

4.10.1

AG. Volkswagen AG d agen oes ksw not l o V gu by ara d e nte is r o eo h ut ra a c s s

ility ab y li an pt ce

un le

♦ Tyre inflator -VAS 5216-

Tests at delivery inspection

– Check tyre side walls and treads for damage and foreign bodies such as, for example, nails or glass splinters. Tests at service

– Check tyre side walls and treads for damage and foreign bodies such as, for example, nails or glass splinters. – Check tyres for cupping, one-sided wear, porous side walls, cuts and punctures. – Ensure direction of rotation is correct and tyres are not fitted wrong way round.

♦ If damage is determined, always check to see if a new tyre

should be fitted.

4.10.2

Wear pattern: checking

The wear pattern on the front tyres will indicate, for example, if toe and camber settings should be checked: ♦ Feathering on tread indicates incorrect toe setting. ♦ One-sided tread wear is mainly attributed to incorrect cam‐ ber. When wear of this nature is detected, determine cause by checking alignment (repair measure).

56 4. Descriptions of work

AG.

⇒ Wheels and Tyres Guide - General Information; Rep. gr. 44; Information about tyres; Tyre ageing

agen lksw Vo by

Prote cted by c o p yri gh t. C op yi

♦ For indications of tyre ageing, see Wheels and Tyres Guide.

ht rig py Co t.

Note

do c um en

r fo ng

– Check for ageing of tyres.

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

4.10.3

Tyre tread depth (including spare wheel): checking

– Check tyre tread depth. Minimum tread depth: 1.6 mm Note ♦ This figure may vary according to legislation in individual

countries. Your importer will inform you about this.

♦ The minimum tread depth is reached when the tyres have

worn down level with the 1.6 mm high tread wear indicators -arrows- positioned at intervals around the tyre.

♦ If the tread depth is approaching the minimum allowed

depth, inform the customer.

4.10.4

General information AG. Volkswagen AG d agen oes

NOTICE y Volksw

not gu ara db e nte pattern s i r For safety reasons, only tyres of same type and tread o eo h ut fitted on a vehicle! ra shoulds abe c s

r fo ng

urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d p

rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um en

ht rig py Co t.

un le

ility ab y li an pt ce

– Observe approved wheel and tyre combinations. ⇒ Wheels and tyres guide; Rep. gr. 44; Wheels, tyres, vehicle geom‐ etry; Wheel and tyre combinations

4. Descriptions of work

agen lksw Vo by

AG.

Prote cted by c o py rig ht . C op yi

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 Note ♦ Tyre pressures for the relevant model can also be found on

a sticker. It is attached to the inside of tank flap or to B-pillar.

♦ The pressures on the sticker apply to cold tyres. Do not

reduce increased pressures of warm tyres.

♦ Depending on the vehicle, the sticker may also contain in‐

formation on the comfort tyre pressure. The comfort tyre pressure facilitates improved driving comfort.

♦ Driving with comfort tyre pressure may result in an increased

fuel consumption.For delivery inspections or repairs, the par‐ tial load tyre pressure is to be used.

♦ Adjust the tyre pressure to suit the vehicle load. For delivery

inspections or repairs, the partial load tyre pressure is to be used.

♦ If no inflation pressure is shown for the spare wheel, then

inflate the spare wheel to the highest inflation pressure for the vehicle.

♦ Please note that basic setting should be performed on vehi‐

cles with Tyre Pressure Loss Indicator after every pressure change ⇒ page 137 .

Winter tyres Note G. Volkswagen o found in ⇒ Wheels and tyres guide; y V Rep. gr. 44; Wheels, db tyres, vehicle geometry; Wheel ise and tyre combinations. r ho ut If winter tyres are fitted,ssaa sticker indicating the speed limit

G do en A agwinter ♦ Important information on recommended tyres canAbe es n lksw

un le

r fo ng

creased. However, this only applies if the winter tyre used corresponds exactly to the standard summer tyre size and the speed index is no higher than “H”. If this is not the case, please refer to the recommendation of the tyre manufactur‐ er.

agen lksw Vo by

AG.

Prote cted by c o py rig ht . C op yi

58 4. Descriptions of work

rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um en

urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d p

♦ For winter tyres, the tyre pressure does not have be in‐

ility ab y li an pt ce

must be attached in the interior where it is visible for the customer.

ht rig py Co t.

♦

ot g ua ran tee or ac

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

4.10.5

Tyre pressures, Arteon

Note ♦ During delivery inspection, check that tyre inflation pressure

sticker is fitted. If the sticker is missing, order a new sticker through ETKA.

♦ The mandatory tyre pressures for the respective model can

be found on a sticker attached to the inside of the tank flap or to the B-pillar.

♦ If the inflation pressure sticker is missing, proceed as fol‐

lows:

♦ Locate correct part number for respective vehicle in ETKA.

AG. Volkswagen AG d agen oes

ksw ♦ Using part number, determine respective Vol inflation pressures

in tyre inflation table.

not gu ara nte eo ra c ility ab y li an pt ce

un le

♦

y db ise r ho Uniform pressure: if tyre sizesautare not shown for a part num‐ s ber, then a uniform pressures is valid for all authorised wheel/

Check tyre pressure using tyre inflator -VAS 5216-, correct if necessary. Part number -3G8 010 000-

Half load, comfort kPa/bar/psi Front Rear

Full payload kPa/bar/psi Front Rear

250/2.5/36

220/2.2/32

250/2.5/36

220/2.2/32

250/2.5/36

220/2.2/32

250/2.5/36

270/2.7/39

250/2.5/36 250/2.5/36 250/2.5/36 250/2.5/36

220/2.2/32 220/2.2/32 220/2.2/32 220/2.2/32 220/2.2/32 220/2.2/32 220/2.2/32 220/2.2/32 420/4.2/61

250/2.5/36 250/2.5/36 250/2.5/36 250/2.5/36

270/2.7/39 270/2.7/39 270/2.7/39 270/2.7/39

Prote cted by

AG.

c o p yri gh t. C op yi

agen lksw Vo by

r te o iva r rp fo ng

250/2.5/36

in t his d o cu m en

215/55 R17 M+S 245/45 R18 M+S 245/40 R19 M+S 225/55 R17 245/45 R18 245/40 R19 245/35 R20 T125/70 R18

Half payload kPa/bar/psi Front Rear

ht rig py Co t.

Tyre size

Arteon

rrectness o f i t to the co n f orm spec atio h re n wit

es, in part or in w l purpos hole ercia , is n m ot com

pe rm itte d

tyre combinations. ⇒ Wheels and tyres guide; Rep. gr. 44; Wheels, tyres, vehicle geometry; Wheel and tyre combina‐ tions

270/2.7/39 270/2.7/39

1) Spare wheel

Part number -3G8 010 000 A-

Tyre size 215/55 R17 M+S 245/45 R18 M+S

Arteon Half payload kPa/bar/psi Front Rear

Half load, comfort kPa/bar/psi Front Rear

Full payload kPa/bar/psi Front Rear

260/2.6/38

230/2.3/33

260/2.6/38

280/2.8/41

260/2.6/38

230/2.3/33

260/2.6/38

280/2.8/41

4. Descriptions of work

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 Part number -3G8 010 000 A-

Arteon Half payload kPa/bar/psi Front Rear

Tyre size

260/2.6/38

230/2.3/33

Full payload kPa/bar/psi Front Rear

230/2.3/33

un le

AG. Volkswagen AG d agen oes ksw n l o 260/2.6/38 by V 260/2.6/38 230/2.3/33 ot g230/2.3/33 ua d ran se i tee r 260/2.6/38 260/2.6/38 230/2.3/33 230/2.3/33 o h or ut ac a 260/2.6/38 260/2.6/38 230/2.3/33 230/2.3/33 ss

260/2.6/38

230/2.3/33 230/2.3/33 420/4.2/61

1) Spare wheel

Part number -3G8 010 000 B-

260/2.6/38 260/2.6/38 260/2.6/38 260/2.6/38

280/2.8/41 280/2.8/41 280/2.8/41 280/2.8/41

250/2.5/36

---

250/2.5/36

---

250/2.5/36

---

250/2.5/36 250/2.5/36 270/2.7/39 250/2.5/36

---------

Full payload kPa/bar/psi Front Rear

do c um en

ht rig py Co t.

agen lksw Vo by

AG.

Prote cted by

c o p yri gh t. C op yi

215/55 R17 M+S 245/45 R18 M+S 245/40 R19 M+S 225/55 R17 245/45 R18 245/40 R19 245/35 R20 T125/70 R18

Half load, comfort kPa/bar/psi Front Rear

r fo ng

Tyre size

Arteon Half payload kPa/bar/psi Front Rear

280/2.8/41

rrectness of i t to the co nform spec at i h re o n wit in t his

es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

260/2.6/38

ility ab y li an pt ce

245/40 R19 M+S 225/55 R17 245/45 R18 245/40 R19 245/35 R20 T125/70 R18

Half load, comfort kPa/bar/psi Front Rear

---------

280/2.8/41

300/3.0/44

280/2.8/41

300/3.0/44

280/2.8/41

300/3.0/44

280/2.8/41 280/2.8/41 300/3.0/44 280/2.8/41

300/3.0/44 300/3.0/44 320/3.2/46 300/3.0/44

420/4.2/61

1) Spare wheel

Part number -3G8 010 000 C-

Tyre size 215/55 R17 M+S 245/45 R18 M+S 245/40 R19 M+S 225/55 R17 245/45 R18

Arteon Half payload kPa/bar/psi Front Rear

Half load, comfort kPa/bar/psi Front Rear

Full payload kPa/bar/psi Front Rear

270/2.7/39

240/2.4/35

270/2.7/39

290/2.9/42

270/2.7/39

240/2.4/35

270/2.7/39

290/2.9/42

270/2.7/39

240/2.4/35

270/2.7/39

290/2.9/42

270/2.7/39 270/2.7/39

240/2.4/35 240/2.4/35

270/2.7/39 270/2.7/39

290/2.9/42 290/2.9/42

60 4. Descriptions of work

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ AG. Volkswagen AG d agen oes - Edition 11.2022 Maintenance ksw not l o V

1) Spare wheel

Part number -3G8 010 000 D-

Full payload kPa/bar/psi Front Rear

240/2.4/35 240/2.4/35 240/2.4/35 240/2.4/35 420/4.2/61

270/2.7/39 270/2.7/39

Arteon

r fo ng

Half payload kPa/bar/psi Front Rear

Half load, comfort kPa/bar/psi Front Rear

290/2.9/42 290/2.9/42

Full payload kPa/bar/psi Front Rear

250/2.5/36

---

290/2.9/42

250/2.5/36

---

290/2.9/42

310/3.1/45

250/2.5/36

---

290/2.9/42

310/3.1/45

250/2.5/36 250/2.5/36

-----

290/2.9/42 290/2.9/42

310/3.1/45 310/3.1/45

agen lksw Vo by

AG.

215/55 R17 M+S 245/45 R18 M+S 245/40 R19 M+S 245/40 R19 245/35 R20 T125/70 R18

270/2.7/39 270/2.7/39

Prote cted by c o py rig ht . C op yi

Tyre size

urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d p

270/2.7/39 270/2.7/39

Half load, comfort kPa/bar/psi Front Rear

ht rig py Co t.

245/40 R19 245/35 R20 T125/70 R18

Half payload kPa/bar/psi Front Rear

Arteon

rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um en

Tyre size

gu ara nte eo ra c

ility ab y li an pt ce

un le

Part number -3G8 010 000 C-

by ed ris o th au

310/3.1/45

420/4.2/61

1) Spare wheel

Part number -3G8 010 000 E-

Tyre size 225/55 R17 245/45 R18 T125/70 R18 1)

Arteon Half payload kPa/bar/psi Front Rear 260/2.6/38 260/2.6/38

260/2.6/38 260/2.6/38

Half load, comfort kPa/bar/psi Front Rear 230/2.3/33 230/2.3/33 230/2.3/33 230/2.3/33 420/4.2/61

Full payload kPa/bar/psi Front Rear 260/2.6/38 260/2.6/38

280/2.8/41 280/2.8/41

1) Spare wheel

4. Descriptions of work

pe rm itte d

un le

ility ab y li an pt ce

AG. Volkswagen AG d agen oes ksw not l o V gu by ara d e nte is r o eo ➤ h Arteon 2018ut ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ra a c s Maintenance - Edition 11.2022 s

Arteon Half payload kPa/bar/psi Front Rear

Tyre size

---

260/2.6/38

---

260/2.6/38

---

260/2.6/38 260/2.6/38 280/2.8/41 280/2.8/41

---------

AG.

Prote cted by c o p yri gh t. C op yi

1) Spare wheel

420/4.2/61 agen lksw Vo by

r te o iva r rp fo g n

260/2.6/38

Part number -3G8 010 000 L-

Tyre size 215/55 R17 M+S 245/45 R18 M+S 245/40 R19 M+S 245/40 R19 245/35 R20 T125/70 R18

ht rig py Co t.

260/2.6/38

do c um en

215/55 R17 M+S 245/45 R18 M+S 245/40 R19 M+S 225/55 R17 245/45 R18 245/40 R19 245/35 R20 T125/70 R18

Half load, comfort kPa/bar/psi Front Rear

rrectness of i t to the co nform spec a t i h re o n in wit thi s

es, in part or in w l purpos hole ercia , is n m ot com

Part number -3G8 010 000 F-

Full payload kPa/bar/psi Front Rear

290/2.9/42

310/3.1/45

290/2.9/42

310/3.1/45

290/2.9/42

310/3.1/45

290/2.9/42 290/2.9/42 310/3.1/45 310/3.1/45

310/3.1/45 310/3.1/45 330/3.3/48 330/3.3/48

Arteon Half payload kPa/bar/psi Front Rear

Half load, comfort kPa/bar/psi Front Rear

Full payload kPa/bar/psi Front Rear

250/2.5/36

---

280/2.8/41

300/3.0/44

250/2.5/36

---

280/2.8/41

300/3.0/44

250/2.5/36

---

280/2.8/41

300/3.0/44

250/2.5/36 250/2.5/36

-----

280/2.8/41 280/2.8/41

300/3.0/44 300/3.0/44

420/4.2/61

1) Spare wheel

Part number -3G8 010 000 G-

Tyre size 225/55 R17 9 7W 245/45 R18 9 6W 245/40 R19 9 4W

Arteon Half payload kPa/bar Front Rear

Half payload kPa/bar Front Rear

Full payload kPa/bar Front Rear

230/2.3

---

260/2.6

280/2.8

230/2.3

---

260/2.6

280/2.8

230/2.3

---

260/2.6

280/2.8

62 4. Descriptions of work

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 Part number -3G8 010 000 G-

Arteon

Tyre size 245/35 R20 9 5Y T125/70 R18 99M 1)

Half payload kPa/bar Front Rear

Full payload kPa/bar Front Rear

230/2.3

---

260/2.6

230/2.3

---

280/2.8

420/4.2

1) Spare wheel

Part number -3G8 010 000 H-

Tyre size un le

t au

250/2.5

---

250/2.5

---

270/2.7

---

250/2.5

--420/4.2

1) Spare wheel

Part number -3G8 010 000 J-

---

280/2.8

300/3.0

---

300/3.0

320/3.2

---

280/2.8

300/3.0

Half payload kPa/bar Front Rear

Full payload kPa/bar Front Rear

230/2.3

---

260/2.6

280/2.8

230/2.3

---

260/2.6

280/2.8

---

280/2.8

300/3.0

---

280/2.8

300/3.0

Prote cted by

c o p yri gh t . C op yi

250/2.5

AG.

r fo ng

300/3.0

Half payload kPa/bar Front Rear

agen lksw Vo by

225/55 R17 9 7W 245/45 R18 9 6W 245/40 R19 9 4W 245/35 R20 9 5Y T125/70 R18 99M 1)

280/2.8

Arteon

ht rig py Co t.

Tyre size

Full payload kPa/bar Front Rear

---

rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um en

urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d p

olkswagen AG does Half payload not gkPa/bar ua ran tee Front Rear or ac

AG. V Halfswpayload agen k olkPa/bar V by ed risFront Rear o h

ility ab y li an pt ce

225/55 R17 9ss 7W 245/45 R18 9 6W 245/40 R19 9 4W 245/35 R20 9 5Y T125/70 R18 99M 1)

Arteon

420/4.2

1) Spare wheel

4. Descriptions of work

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 Part number -3G8 010 000 K-

Half payload kPa/bar Front Rear

Full payload kPa/bar Front Rear

230/2.3

---

260/2.6

280/2.8

260/2.6

280/2.8

290/2.9

310/3.1

290/2.9

310/3.1

230/2.3

---

AG. Volkswagen AG d agen oes ksw not l o gu --230/2.3 ed by V230/2.3 --ara nte is r o eo h ut ra a c 250/2.5 250/2.5 ----s s

250/2.5

---

--420/4.2

1) Spare wheel

Part number -3G8 010 000 M-

230/2.3

---

230/2.3

---

230/2.3

420/4.2

AG.

230/2.3

agen lksw Vo by

r fo ng

Half payload kPa/bar Front Rear

Prote cted by c o p yri gh t. C op yi

225/55 R17 9 7W 245/45 R18 9 6W 245/40 R19 9 4W T125/70 R18 99M 1)

Half payload kPa/bar Front Rear

ht rig py Co t.

Tyre size

Arteon

rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um en

urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d p

250/2.5

ility ab y li an pt ce

225/55 R17 9 7W 245/45 R18 9 6W 245/40 R19 9 4W 245/35 R20 9 5Y T125/70 R18 99M 1)

Half payload kPa/bar Front Rear

un le

Tyre size

Arteon

Full payload kPa/bar Front Rear

260/2.6

280/2.8

260/2.6

280/2.8

260/2.6

280/2.8

1) Spare wheel

Part number -3G8 010 000 N-

Tyre size 225/55 R17 9 7W 245/45 R18 9 6W 245/40 R19 9 4W T125/70 R18 99M 1)

Arteon Half payload kPa/bar Front Rear

Half payload kPa/bar Front Rear

Full payload kPa/bar Front Rear

250/2.5

---

280/2.8

300/3.0

250/2.5

---

280/2.8

300/3.0

270/2.7

---

300/3.0

320/3.2

1) Spare wheel

64 4. Descriptions of work

420/4.2

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 Part number -3G8 010 000 P-

Tyre size 225/55 R17 9 7W 245/45 R18 9 6W 245/40 R19 9 4W T125/70 R18 99M 1)

Arteon Half payload kPa/bar Front Rear

Half payload kPa/bar Front Rear

Full payload kPa/bar Front Rear

230/2.3

---

260/2.6

280/2.8

230/2.3

---

260/2.6

280/2.8

250/2.5

---

280/2.8

300/3.0

420/4.2

1) Spare wheel

Part number -3G8 010 000 Q-

---

260/2.6

290/2.9

250/2.5

---

290/2.9

310/3.1

un le

---

Half payload kPa/bar/psi Front Rear

420/4.2

Arteon

260/2.6/38

260/2.6/38 260/2.6/38 280/2.8/41

Half load, comfort kPa/bar/psi Front Rear ---

Full payload kPa/bar/psi Front Rear

---

290/2.9/42

---

290/2.9/42

---

290/2.9/42

-------

290/2.9/42 290/2.9/42 310/3.1/45

do c um en

215/55 R17 M+S 245/45 R18 M+S 245/40 R19 M+S 225/55 R17 245/45 R18 245/40 R19 T125/70 R18

230/2.3

r te o iva r rp fo g n

Tyre size

ac 290/2.9

es, in part or in w l purpos hole ercia , is n m ot com

Part number -3G8 010 000 R-

260/2.6

Prote cted by c o p yri gh t. C op yi

1) Spare wheel

---

pe rm itte d

250/2.5

---

AG.

230/2.3

t au ss

agen lksw Vo by

230/2.3

rrectness of i t to the co nform spec a t i h re o n in wit thi s

230/2.3

ility ab y li an pt ce

225/55 R17 9 7W 245/45 R18 9 6W 245/35 R20 9 5Y T125/70 R18 99M 1)

AG. Volkswagen AG d Full payload Half payload agen oes ksw nokPa/bar l o t gu VkPa/bar by ara d e nte Rear is r Front Rear Front e ho

Half payload kPa/bar Front Rear

310/3.1/45 ht rig py Co t.

Tyre size

Arteon

310/3.1/45

310/3.1/45 310/3.1/45 330/3.3/48

420/4.2/61

1) Spare wheel

4. Descriptions of work

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

Part number -3G8 010 000 CDHalf payload kPa/bar/psi Front Rear

Tyre size

Half load, comfort kPa/bar/psi Front Rear

250/2.5/36

---

280/2.8/41

300/3.0/44

250/2.5/36 270/2.7/39 250/2.5/36

-------

280/2.8/41 300/3.0/44 280/2.8/41

300/3.0/44 320/3.2/46 300/3.0/44

420/4.2/61

1) Spare wheel

un le

urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d p

1) Spare wheel

Half load, comfort kPa/bar/psi Front Rear

250/2.5/36

---

250/2.5/36

270/2.7/39

260/2.6/38

---

290/2.9/42

310/3.1/45

420/4.2/61

Part number -3G8 010 000 BD-

Half load, comfort kPa/bar/psi Front Rear

r fo ng

Half payload kPa/bar/psi Front Rear

250/2.5/36

250/2.5/36 Prote cted by

250/2.5/36

---

Full payload kPa/bar/psi Front Rear

270/2.7/39

300/3.0/44

---

270/2.7/39

300/3.0/44

250/2.5/36

---

250/2.5/36

---

270/2.7/39

300/3.0/44

250/2.5/36 250/2.5/36 250/2.5/36 250/2.5/36

---------

270/2.7/39 270/2.7/39 270/2.7/39 270/2.7/39

300/3.0/44 300/3.0/44 300/3.0/44 300/3.0/44

66 4. Descriptions of work

AG.

215/55 R17 M+S 245/45 R18 M+S 245/40 R19 M+S 225/55 R17 245/45 R18 245/40 R19 245/35 R20

Arteon

c o p yri gh t. C op yi

Tyre size

Full payload kPa/bar/psi Front Rear

250/2.5/36

agen lksw Vo by

Half payload kPa/bar/psi Front Rear

rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um en

245/45 R18 M+S 245/35 R20 T125/70 R18

AG. Volkswagen AG d agen oes ksw not l o V gu y b ara d nte ise r o eo h t Arteon u ra a c s s

ility ab y li an pt ce

Part number -3G8 010 000 CF-

Tyre size

Full payload kPa/bar/psi Front Rear

ht rig py Co t.

245/45 R18 M+S 245/45 R18 245/40 R19 245/35 R20 T125/70 R18

Arteon

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 Part number -3G8 010 000 BC-

Arteon

Tyre size

Half payload kPa/bar Front Rear

Half load, comfort kPa/bar/psi Front Rear

Full payload kPa/bar Front Rear

225/45 R17 245/45 R18

240/2.4 240/2.4

-----

260/2.6 260/2.6

240/2.4 240/2.4

-----

Part number -3G8 010 000 FE-

Arteon Half payload kPa/bar/psi Front Rear

Tyre size 245/40 R19 245/35 R20 215/55 R17 M+S 245/45 R18 M+S T125/70 R18

250/2.5/36

Half load, comfort kPa/bar/psi Front Rear

250/2.5/36

---

Full payload kPa/bar/psi Front Rear 290/2.9/42

310/3.1/45

AG. Volkswagen AG d agen oes ksw not 420/4.2/61 l o V gu y b ara d nte ise r o eo h t u ra a c s s

urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d p

225/55 R17 245/45 R18 T125/70 R18

260/2.6/38

Half load, comfort kPa/bar/psi Front Rear

260/2.6/38

230/2.3/33

rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um en

Half payload kPa/bar/psi Front Rear

Tyre size

4.11

Arteon

ility ab y li an pt ce

Part number -3G8 010 000 FFun le

290/2.9 290/2.9

230/2.3/33

Full payload kPa/bar/psi Front Rear 260/2.6/38

290/2.9/42

420/4.2/61

Brake and clutch system: changing brake fluid

Special tools and workshop equipment required

♦ Torque wrench

ht rig py Co t.

r fo ng

♦ Brake filling and bleeding equipment -VAS 5234-

4. Descriptions of work

agen lksw Vo by

AG.

Prote cted by

c o p yri gh t. C op yi

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 ♦ Brake filling and bleeding equipment -VAS 6860-

♦ Insert tool -VAS 6564/9-

AG. Volkswagen AG d agen oes ksw not l o gu yV b ara d e nte is r o eo h ut ra a c s s

rrectness o f i t to the co n f orm spec atio h re n wit

CAUTION

es, in part or in w l purpos hole ercia , is n m ot com

pe rm itte d

ility ab y li an pt ce

un le

♦ Tool set for brake bleeding -VAS 6564-

Risk of skin injury from corrosive brake fluid. Risk of irritation and injury to skin. – Avoid contact with the skin.

r te o iva r rp fo ng

agen lksw Vo by

AG.

Prote cted by c o py rig ht . C op yi

68 4. Descriptions of work

in t his d o cu m en

Risk of damage to vehicle from corrosive brake fluid. Possible damage to paintwork and vehicle. – Avoid contact with components and paintwork and if nec‐ essary rinse off any spilt brake fluid with water.

ht rig py Co t.

NOTICE

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

NOTICE Risk of damage to brake system if brake fluid is used incor‐ rectly. Mineral oils damage plugs and sleeves of the brake system. – Do not mix fluids containing mineral oil (oil, petrol, cleaning solution) with brake fluid.

NOTICE Brake fluid is hygroscopic, which means it absorbs moisture from the ambient air. If the water content in the brake fluid is too high, the brake system could fail, and it promotes corrosion within the brake system. – Store brake fluid in air tight containers. Extracting brake fluid – Unscrew cap -1- from brake fluid reservoir.

nte eo ra c

ris ho ut a ss

rrectness of i t to the co nform spec a t i h re o n in wit thi s

Note

es, in part or in w l purpos hole ercia , is n m ot com

pe rm itte d

ility ab y li an pt ce

un le

– Using the suction hose from brake filling and gen AG G. Volkswaunit, Ableeding does agen extract as much brake fluid -2- from the kswbrake fluid reservoir not l o gu yV b as possible through the strainere-1-. ara d

♦ The strainer in brake fluid reservoir must remain in place.

completing the extraction (the brake fluid level in the reser‐ voir must be even with the lower edge of the strainer).

do c um en

r te o iva r rp fo g n

♦ Ensure that no brake fluid runs through the strainer after

4. Descriptions of work

ht rig py Co t.

agen lksw Vo by

AG.

Prote cted by c o py rig ht . C op yi

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 Connecting brake filling and bleeding equipment – Screw adapter -1- onto brake fluid reservoir.

– Connect filler hose from brake filling and bleeding unit to adapter -1-. – Set correct pressure on brake filling and bleeding equipment ⇒ Operating Manual, and switch on brake filling and bleed‐ ing equipment. Note G. Volkswagen AG d oes not o gu that no air can enter the brake system. yV b ara d e nte is r o eo There must always be sufficient brake fluid h in the brake res‐ ut ra a ervoir so that no air can enter the brake system through the c s s

A agen so ♦ The bleeder hose must be firmly seated on bleeder valve lksw

♦

pe rm itte d

un le

ility ab y li an pt ce

reservoir.

♦ Start with front right brake caliper on RHD vehicles. ♦ Due to the tool attachment -VAS 6564/9- the rear wheels do

rrectness of i t to the co nform spec a t i h re o n in wit thi s

Front axle

es, in part or in w l purpos hole ercia , is n m ot com

not need to be removed any more.

agen lksw Vo by

Prote cted by c o py rig ht . C op yi

AG.

70 4. Descriptions of work

ht rig py Co t.

– Push collector bottle bleeder hose -1- onto front left bleeder valve.

do c um en

r te o iva r rp fo g n

– Remove cap -1- from bleeder valve of front left brake caliper.

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

– Open bleeder screw, and let appropriate quantity of brake fluid run out ⇒ page 73 . . Volkswag

n AG gr. 47; en AG do – Close bleeder valve. Torque: ⇒ Brake system; ageRep. es n ksw l ot g o V Front brake caliper; Assembly overview ua by - front brake caliper. d ise

ran tee or ac

or brake caliper. – Fit cap back onto bleeder valve thon

u sa

un le

pe rm itte d

Rear axle

ility ab y li an pt ce

s – Repeat procedure on front right.

– Use tool attachment -VAS 6564/9- for rear axle. ht rig py Co t.

– Guide bleeder hose -1- from tool set for brake bleeding -VAS 6564- from inner side of rim through socket -3-, and fit it onto bleeder valve.

in t his d o cu m en

r te o iva r rp fo ng

rrectness o f i t to the co n f orm spec atio h re n wit

es, in part or in w l purpos hole ercia , is n m ot com

– Remove cover cap -1- from bleeder valve of rear left brake caliper.

agen lksw Vo by

AG.

Prote cted by c o p yri gh t. C op yi

– Open bleeder screw, and let appropriate quantity of brake fluid run out ⇒ page 73 . – Close bleeder screw; torque: ⇒ Brake system; Rep. gr. 47; Rear brake caliper; Assembly overview - rear brake caliper.

4. Descriptions of work

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 – Fit again cover cap on bleeder valve of rear left brake cali‐ per. – Repeat procedure on rear right of vehicle. Bleeding clutch slave cylinder Note

Applies only to vehicles with manual gearbox. – If the bleeder valve -arrow- is not accessible, remove com‐ plete air filter housing. – ⇒ Rep. gr. 23; Air filter; Removing and installing air filter housing Or – ⇒ Rep. gr. 24; Air filter; Removing and installing air filter housing

ility ab y li an pt ce

un le

–

n AG. Volkswagen AG do es n wage s k l ot g o yV ua b d ran ir se tee o h t or u ac a Remove dust cap from bleeder valve -arrow-. ss es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

– Fit bleeder hose, and connect it to pressure hose of collector bottle. Use bleeder hose -V.A.G 1238B/3- for bleeding, if necessary.

rrectness of i t to the co nform spec at i h re o n wit in t his

– Open bleeder valve.

– Allow approx. 100 ml of brake fluid to flow out. – Close bleeder valve.

– Quickly press and release pedal from stop to stop 10 to 15 times. – Open bleeder valve.

– Allow another 50 ml of brake fluid to flow out. – Close bleeder valve and fit dust cap. – Depress clutch pedal several times after completion of bleeding process. r fo ng

– Unscrew adapter from brake fluid reservoir.

Prote cted by

72 4. Descriptions of work

AG.

– Check brake fluid level and adjust level if necessary. It must be between position -1- and -2-.

agen lksw Vo by

c o p yri gh t . C op yi

– Take filler hose off adapter.

ht rig py Co t.

– Reinstall air filter housing in reverse order of removal.

do c um en

– Switch off brake filling and bleeding unit.

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

– Check function during road test.

Table - Sequence and quantity of brake fluid

r fo ng

0.20 l 0.20 l

Rear left Rear right

0.30 l 0.30 l 0.15 l approx. 1.00 l

4.12

AG.

Clutch slave cylinder Total quantity for automatic gearbox including the quantity extracted from the brake fluid res‐ ervoir Total quantity for manual gearbox including the quantity extracted from the brake fluid res‐ ervoir

agen lksw Vo by

Wheel brake cylinder/brake caliper

Front left Front right

Prote cted by c o p yri gh t. C op yi

Brake caliper

Brake fluid quantity which must flow out of bleeder valves:

ht rig py Co t.

Sequence bleeder valves:

rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um en

urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d p

ility ab y li an pt ce

un le

– Screw cap -1- onto brake fluid reservoir.

AG. Volkswagen AG d agen oes ksw not l o V gu by ara d e nte is r o eo h ut ra a c s s

approx. 1.15 l

Brake system and shock absorbers: in‐ specting for leaks and damage

Check following components for leaks and damage: ♦ Brake master cylinder ♦ Brake servo (for anti-lock brake system: hydraulic unit) ♦ Brake pressure regulator and

4. Descriptions of work

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 ♦ Brake caliper ♦ Shock absorbers (during inspection only) ♦ Presence of dust caps on brake fluid bleeder screws ♦ Presence of caps on guide bushes – Ensure that brake hoses are not twisted. – Additionally ensure that brake hoses do not touch any vehi‐ cle components when steering is at full lock. – Check brake hoses for abrasion, porosity and brittleness. – Check brake lines for corrosion. – Check brake connections and fastenings for correct seating, leaks and corrosion. – Check brake lines and brake hoses for correct seating and attachment in retainers. Note

AG. Volkswagen AG d agen oes ksw not l o V gu y b ara d e nte Faults found must always be rectifiedo(repair measure). ris eo h t u ra a c s s

Brake fluid level: checking

CAUTION

es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

un le

ility ab y li an pt ce

4.13

NOTICE

rrectness of i t to the co nform spec at i h re o n wit in t his

Risk of skin injury from corrosive brake fluid. Risk of irritation and injury to skin. – Avoid contact with the skin.

r fo ng

Prote cted by

Brake fluid level at delivery inspection – At delivery inspection, the fluid level must be at MAX. mark‐ ing -1-.

74 4. Descriptions of work

AG.

Brake fluid is hygroscopic, which means it absorbs moisture from the ambient air. If the water content in the brake fluid is too high, the brake system could fail, and it promotes corrosion within the brake system. – Store brake fluid in air tight containers.

agen lksw Vo by

c o p yri gh t. C op yi

NOTICE

do c um en

Risk of damage to brake system if brake fluid is used incor‐ rectly. Mineral oils damage plugs and sleeves of the brake system. – Do not mix fluids containing mineral oil (oil, petrol, cleaning solution) with brake fluid.

ht rig py Co t.

NOTICE

rrectness of i t to the co nform spec at i h re o n wit in t his

Note

es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

un le

ility ab y li an pt ce

n AG. Volkswagen AG do es n wage s k l ot g Vo y ua b Arteon 2018 ➤, Arteon d 2021 ➤, Arteon Shooting Brake 2021 ran ➤ ir se tee o Maintenance - Edition 11.2022 h t or u ac a ss

r fo ng

Prote cted by

lining/pad wear.

AG.

♦ The fluid level must always be judged in conjunction with

agen lksw Vo by

c o p yri gh t . C op yi

Note

ht rig py Co t.

Brake fluid level at inspection service

do c um en

To prevent brake fluid from flowing out of the reservoir, the MAX. marking -1- must not be exceeded.

♦ When vehicle is in use, fluid level tends to drop slightly due

to lining/pad wear and automatic adjustment.

Recommended brake fluid level “before” brake pads are at wear limit •

At MIN marking or just above -2-

“replenishing is NOT required”.

Recommended brake fluid level, brake pads new or well within wear limit: •

Between MIN and MAX markings Note

If the fluid level is below MIN. marking -2-, the brake system must be checked for leaks before fluid is topped up, “Repair measure”.

4. Descriptions of work

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

4.14

Brakes, front and rear: checking thick‐ ness of brake pads and condition of brake discs

Front disc brake pads: checking thickness ⇒ page 76 Rear disc brake pads: checking thickness ⇒ page 77 Brake discs: checking condition ⇒ page 78 Special tools and workshop equipment required ♦ Torque wrench ♦ Battery lamp -VAS 6901-

♦ Mirror

AG. Volkswagen AG d agen oes ksw not l o V gu y b ara d nte ise r o eo h t u ra a c s s

un le

pe rm itte d

Front disc brake pads: checking thick‐ ness

rrectness of i t to the co nform spec a t i h re o n in wit thi s

Note

es, in part or in w l purpos hole ercia , is n m ot com

4.14.1

ility ab y li an pt ce

The adapter to loosen and tighten the anti-theft wheel bolts can be found in the vehicle tool kit ⇒ page 132 .

One some vehicles it may be very difficult to ascertain or meas‐ ure the thickness of the pad due to the geometry of the wheel rim. If this is the case, remove the wheel on the side where the brake pad wear indicator is installed for better evaluation or measurement of the remaining pad thickness. Procedure

– Measure inner and outer pad thickness.

76 4. Descriptions of work

Prote cted by

– Unbolt wheel bolts and remove wheel.

AG.

– Mark position of wheel relative to brake disc.

agen lksw Vo by

c o p yri gh t. C op yi

– Pull off wheel bolt covers if necessary ⇒ page 132 .

ht rig py Co t.

– For better evaluation or measurement of remaining pad thickness, remove wheel on side where brake pad wear indi‐ cator is installed as necessary.

do c um en

r te o iva r rp fo g n

– Measure outer and inner brake pad thickness by inspecting through the holes of wheel rim (depending on type).

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

a - Pad thickness “without” backplate Wear dimension: 2 mm Note ♦ The brake pads have reached their wear limit at a pad thick‐

ness of 2 mm (without backplate) and must be renewed (repair measure).

Volkswa k l o t gu V wear as well. Checkingby and if necessary replacing thenobrake ara d e discs is a repair measure. nte s ri o eo h t u ra a c s s Procedure

gen AG AG.check brake d ♦ When replacing brake pads,swalways discs agen oes for

un le

ility ab y li an pt ce

– Tighten wheel securing bolts in diagonal sequence to speci‐ fied torque ⇒ page 132 . – Place adapter in vehicle tool kit after completing work. – Fit wheel bolt covers if necessary .

4.14.2

Rear disc brake pads: checking thick‐ ness

Note

agen lksw Vo by

Prote cted by

c o p yri gh t. C op yi

Procedure

ht rig py Co t.

r fo ng

rrectness of i t to the co nform spec at i h re o n wit in t his

– If necessary, secure wheel in marked position.

do c um en

es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

– Check brake disc for wear ⇒ Brake system; Rep. gr. 46; Front brake; Assembly overview - front brake.

– Illuminate area behind hole in rim using an electric hand torch. AG.

– Inspect outer pad to determine its thickness.

4. Descriptions of work

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

pe rm itte d

un le

– Illuminate inner pad with an electric hand torch and mirror. – Determine thickness of inner pad by inspecting.

Note

♦ The brake pads have reached their wear limit at a pad thick‐

ness of 2 mm (without backplate) and must be renewed (repair measure).

♦ When replacing brake pads, always check brake discs for

wear as well. Checking and if necessary replacing the brake discs is a repair measure. r te o iva r rp fo ng

Procedure

– Check brake disc for wear ⇒ Brake system; Rep. gr. 46; Rear brake; Assembly overview - rear brake. ht rig py Co t.

– If necessary, secure wheel in marked position. c o p yri gh t . C op yi

– Tighten wheel securing bolts in diagonal sequence to speci‐ fied torque ⇒ page 132 . agen lksw Vo by

Prote cted by

– Place adapter in vehicle tool kit after completing work. AG.

– Fit wheel bolt covers if necessary .

4.14.3

Brake discs: checking condition

Check all brake discs for the following damage patterns: ♦ Cracks ♦ Scoring ♦ Rust (no surface rust) ♦ Burrs on circumference of brake disc Note

Inform the customer if brake disc damage is similar to these damage patterns. Renewing the brake discs is a repair meas‐ ure.

78 4. Descriptions of work

rrectness o f i t to the co n f orm spec atio h re n wit

Wear dimension: 2 mm

in t his d o cu m en

es, in part or in w l purpos hole ercia , is n m ot com

a - Inner and outer pad thickness “without” backplate

ility ab y li an pt ce

n AG. Volkswagen AG do es n wage s k l ot g o yV ua b d ran ir se tee o h t or u ac a ss

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

4.15

Diesel fuel filter: draining Note

Applies only to vehicles with PR number 1A8. Description of work Note ♦ Ensure that no diesel fuel contacts other components in the

engine compartment. Clean immediately, if necessary.

♦ Observe relevant disposal regulations. –

ility ab y li an pt ce

– Carefully loosen banjo bolt -arrow- until water escapes. The water is drained from the diesel fuel filter due the system pressure.

AG.

4.16

Nm agen lksw Vo by

Banjo bolt

Prote cted by c o py rig ht . C op yi

Specified torque

ht rig py Co t.

– Tighten banjo bolt to specified torque.

r fo ng

– When diesel fuel escapes, tighten banjo bolt, and pull off hose.

rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um en

urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d p

un le

–

. Volkswagen AG gen AG does swa k not l o Fit a suitable hose onto banjo bolt -arrow-. gu yV b ara d e nte s i r Start the engine. o eo h ut ra a c s s

Diesel fuel filter: renewing CAUTION

Fuel system is under pressure. Danger of injury caused by fuel spray. – Wear protective gloves! – Wear safety goggles. – To release pressure in fuel system, place clean cloth around connection and carefully undo connection. Special tools and workshop equipment required ♦ Safety gloves

4. Descriptions of work

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 ♦ Safety glasses

es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

ility ab y li an pt ce

Note

un le

Removing

AG. Volkswagen AG d agen oes ksw not l o V gu y b ara d nte ise r o eo h t u ra a c s s

♦ Before opening the system, place a cloth around the filter

housing.

rrectness of i t to the co nform spec at i h re o n wit in t his

♦ Ensure that no diesel fuel contacts other components in the

engine compartment. Clean immediately, if necessary.

♦ Observe relevant disposal regulations. – Switch off ignition.

– Unscrew bolts -arrows- in sequence shown -1- to -5-. – Collect any escaping fuel.

– Remove upper section of fuel filter -1- from fuel filter housing -2-.

80 4. Descriptions of work

Prote cted by

– Insert filter element -1- centrally into fuel filter housing -2-.

AG.

– Always moisten new seal slightly with diesel fuel to avoid malfunctions!

agen lksw Vo by

c o p yri gh t. C op yi

Installing

ht rig py Co t.

– Remove filter element -1- from fuel filter housing -2-.

do c um en

r fo ng

– Place upper part of fuel filter -1- to one side (with fuel lines connected).

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

Further assembly is carried out in the reverse order. Specified torque

Bolts for filter housing

NOTICE Risk of damage to high-pressure pump if allowed to run dry. – After removing or renewing components of fuel system, bleed and fill fuel system before engine is started for first time. Bleeding fuel system •

There must be sufficient fuel in the tank.

– Activate fuel pump ⇒ page 29 . – After the fuel system has been bled, start engine. – Allow engine to run for several minutes at mid revs, then n AG. Volkswagen AG do es n wage switch engine off again. s k l o o

t gu ara nte eo ra c

V by

ed and erase if necessary. – Read event memory ris

tho

un le

pe rm itte d

Note

es, in part or in w l purpos hole ercia , is n m ot com

4.17

Diesel particulate filter: checking

– Check ash loading ⇒ page 29 .

4.18

Dual clutch gearbox 0D9: changing gear oil and filter

Procedure r te o iva r rp fo g n

⇒ 6-speed dual clutch gearbox 0D9; Rep. gr. 34; Gear oil cir‐ cuit; Removing and installing gear oil filter

do c um en

⇒ 6-speed dual clutch gearbox 0D9; Rep. gr. 34; Gear oil; Draining and filling gear oil

rrectness of i t to the co nform spec a t i h re o n in wit thi s

If there is still air in the fuel system, the engine can change to emergency running mode during road test. In this case, switch the engine off and erase the fault memory. Then continue with a road test.

ility ab y li an pt ce

au – Carry out assleakage test of the fuel system.

4. Descriptions of work

ht rig py Co t.

agen lksw Vo by

AG.

Prote cted by

c o p yri gh t . C op yi

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

4.19

Dual clutch gearbox 0DL: changing gear oil

⇒ 7-speed dual clutch gearbox 0DL; Rep. gr. 34; Gear oil; Draining and filling gear oil

4.20

Dual clutch gearbox 0GC: changing gear oil

⇒ 7-speed dual clutch gearbox 0GC; Rep. gr. 34; Gear oil; Draining and filling gear oil

4.21

Electric windows: checking positioning (open and close functions) Note

The automatic opening and closing features for the electric windows do not function after disconnecting and reconnecting the battery. Therefore, before a new vehicle is delivered, the window regulators must be reactivated. Once the windows have been reactivated, the battery must not be disconnected again. CAUTION After batteries have been disconnected and reconnected the roll-back function of the electric window regulators is disabled. Severe pinching injuries could result! – Reposition window regulator. Carry out the following procedure to position the electric window regulators: Note

n AG. Volkswagen AG do es n wage s k l ot g o yV ua b d ran The following work description applies to the front left window ir se te o regulator. Reactivate h the other window automatic functions in e o t u ra a the same manner by operating the respective switch in the c ss pe rm itte d

un le

ility ab y li an pt ce

driver door.

– Switch on ignition. es, in part or in w l purpos hole ercia , is n m ot com

– Pull up button for window regulator and hold in this position for at least one second. – Release button, pull it up again and hold. The one-touch opening and closing function is now ready for use. Note

– Switch off ignition.

Fault memory of all systems: reading with vehicle diagnostic tester, correct‐ agen lksw Vo by

AG.

Prote cted by

c o p yri gh t . C op yi

82 4. Descriptions of work

ht rig py Co t.

4.22

do c um en

r te o iva r rp fo g n

It is possible to re-establish the position of one or more window regulators at the same time.

rrectness of i t to the co nform spec a t i h re o n in wit thi s

– Close all doors and windows completely.

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

ing possible faults according to repair guidelines – Read event memory ⇒ page 29 . – Repair all faults according to repair guidelines. Static faults If one or more static faults are found in the event memory, we recommend seeking agreement from the customer to rectify these faults using Guided Fault Finding. Sporadic faults If only sporadic faults or notes are stored in the event memory and the customer has no complaints regarding the vehicle elec‐ tronic system, erase event memory. Note

The vehicle must always be delivered to the customer with event memory cleared.

4.23

Boots: inspecting

olkswagen AG en AG. V does not gu ara nte eo ra c

g swa and damage. – Check outer and inner boots -arrows- forolkleaks

V by

urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d p

Head-up display (HUD): removing pro‐ tective film

Switching on Head-up Display •

The transport mode must be switched off.

Prote cted by c o p yri gh t. C op yi

– Carefully remove protective film on Head-up Display.

High-voltage battery: checking charge level

agen lksw Vo by

AG.

4.25

ht rig py Co t.

r fo ng

– Press control next to light switch to switch on the Head-up Display.

rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um en

4.24

tho au s s

ility ab y li an pt ce

un le

ed – Ensure clamps -1- are fitted on boots. ris

Checking charge level of high-voltage battery Charge level display of high-voltage battery is located in instru‐ ment cluster. The charge level must be determined for the first time on vehi‐ cle delivery:

4. Descriptions of work

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 Note

AG. Volkswagen AG d agen oes ksw not l o gu yV b ara d e nte is r o eo h ut ra a c s s

un le

pe rm itte d

pre-delivery inspection.

ility ab y li an pt ce

♦ The high-voltage battery must be charged to at least 80 % at ♦ During subsequent service inspections, the high-voltage bat‐

rrectness o f i t to the co n f orm spec atio h re n wit

4.26

es, in part or in w l purpos hole ercia , is n m ot com

tery will be charged fully only if requested by the customer.

Maintenance of high-voltage battery

The high-voltage battery maintenance programme includes de‐ termining the battery charge level ⇒ page 83 and, depending on the test result, the subsequent charging of the battery. Arteon eHybrid

If the charge level display indicates 1/4 or <1/4, the high-volt‐ age battery has to be charged until the charge level display indicates maximum 1/2.

Note

♦ The high-voltage battery must be charged to at least 80 % at ♦ During subsequent service inspections, the high-voltage bat‐

4.28

Hybrid components: inspect for dam‐ age to high-voltage components and wires. WARNING

High voltage in the hybrid vehicle's high-voltage system! Risk of electric shock! – All work on vehicles with high-voltage system must only be carried out by persons who are at least qualified as “electrically instructed person (EIP)”. – Before commencing any work, inspect high voltage com‐ ponents in working area. – Observe the safety notes ⇒ 4-cyl. injection engine (hybrid); Rep. gr. 00; Safety notes. – In the event of conspicuous findings or uncertainties, con‐ tact your responsible high-voltage technician or specialist electrician! Carry out visual check During visual check in area of engine compartment, note power and control electronics for electric drive, high-voltage cables for battery and air conditioner compressor, as well as high-voltage cable for electric drive motor and high-voltage charging socket in front left wing. When inspecting the underbody, note the hybrid battery and the high-voltage cables for battery. Pay attention to the following during inspection:

84 4. Descriptions of work

AG.

tery will be charged fully only if requested by the customer.

agen lksw Vo by

Prote cted by c o py rig ht . C op yi

pre-delivery inspection.

in t his d o cu m en

r te o iva r rp fo ng

High-voltage battery: charging

ht rig py Co t.

4.27

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 ♦ The high-voltage components must not reveal any external damage. ♦ Insulation of high-voltage cables must not be defective or damaged. ♦ Pay attention to unusual deformations of high-voltage ca‐ bles. Note

Defects which are found must be immediately reported to the responsible high-voltage technician.

4.29

Interior and exterior body: inspecting for corrosion with doors and flaps open

n AG. Volkswagen AG do es n wage s k l ot g o yV ua b d ran ir se tee o h t or u ac a ss

♦ Sliding sunroof frame

♦ Inner and outer door frame ♦ Area around trim strips

Poly V-belt: renew

Prote cted by

4.30

AG.

♦ Inner and outer tailgate

agen lksw Vo by

♦ Wheel arches

c o p yri gh t . C op yi

♦ Inner and outer bonnet

ht rig py Co t.

♦ Outer and inner A-pillar

r fo ng

♦ Windscreen roof edge

rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um en

urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d p

ility ab y li an pt ce

un le

Test locations

Procedure ⇒ Rep. gr. 13; Cylinder block belt pulley end; Removing and installing poly V-belt

4.31

Poly V-belt: checking condition

Procedure – Crank engine at vibration damper on pulley using a socket. Check poly V-belt -1- for: 4. Descriptions of work

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

♦ Sub-surface cracks (cracks, core ruptures, cross-sectional breaks) ♦ Layer separation (top layer, cord strands)

AG. Volkswagen AG d agen oes ksw not l o gu yV b ara d e nte Frayed cord strands is r o eo h ut ra a c Flank wearss(material wear, frayed flanks, flank brittleness

♦ Base disruption ♦

pe rm itte d

un le

-glassy flanks-, surface cracks)

NOTICE

On petrol or diesel engines, poly V-belts which came into contact with oil, brake fluid, fuel or reducing agent. Failure or malfunction of alternator/engine/belt drive. – Renew poly V-belt.

agen lksw Vo by

AG.

Prote cted by c o py rig ht . C op yi

86 4. Descriptions of work

ht rig py Co t.

r te o iva r rp fo ng

– The replacement of a poly V-belt is a repair measure.

in t his d o cu m en

es, in part or in w l purpos hole ercia , is n m ot com

NOTICE

rrectness o f i t to the co n f orm spec atio h re n wit

Visible damage such as sub-surface cracks, layer separation, base disruption, frayed cord strands or flank wear. Failure or malfunction of alternator/engine/belt drive. – Renew poly V-belt.

ility ab y li an pt ce

♦

AG. Volkswagen AG d agen oes ksw not l o V gu 2021 ➤ y b Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake ara d nte ise r o Maintenance Edition 11.2022 eo h t u ra a c s s

Cooling system: checking anti-freeze protection and coolant level

♦ Due to the differing constitution of tap water in the various

countries and regions, distilled water must be used for mix‐ ing with coolant concentrate.

♦ Only use coolant additives approved for the vehicle ⇒ Elec‐

tronic parts catalogue (ETKA). Other coolant additives may reduce corrosion protection substantially. The resulting dam‐ age could lead to loss of coolant and subsequent severe damage to the motor.

♦ Mixed in the proper proportions, coolant inhibits frost and

♦ Because of its high boiling point, the coolant improves en‐

gine reliability under heavy loads, particularly in countries with tropical climates.

AG.

Prote cted by

must be used to determine the current anti-freeze value.

agen lksw Vo by

c o p yri gh t. C op yi

♦ The refractometer -T10007A- or refractometer -T10007B-

ht rig py Co t.

r fo ng

corrosion damage as well as scaling. Such additives also raise the boiling point of the coolant. For this reason, the cooling system must be filled all-year-round with coolant ad‐ ditives.

rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um en

Note

urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d p

un le

ility ab y li an pt ce

4.32

♦ Scale -1- of the refractometer is calibrated for the coolant

additives G12++ and G12evo.

♦ Scale -2- of the refractometer is calibrated for the coolant

additive G13.

♦ If it is not possible to ensure that the same type of coolant

additive is filled: always determine anti-freeze protection us‐ ing the scale for G13.

♦ Frost protection must be guaranteed down to -25°C as a

minimum and, in countries with arctic conditions, down to approx. -36°C. Increasing the frost protection is permissible only if climatic conditions require stronger frost protection. It may, however, be increased only to a maximum of -48°C. Otherwise, the cooling effect will be impaired.

4. Descriptions of work

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 ♦ The coolant concentration must not be reduced by adding

water even in warmer seasons and in warmer countries. Frost protection must be guaranteed down to at least -25°C.

♦ The temperature reading on the refractometer corresponds

to the »ice flocculation point«. Flakes of ice may start form‐ ing in the coolant below this temperature. AG. Volkswagen A gen swa

G do es n ot g ua d ran e s i tee r o Use only a water/coolant additive mixture as a slip agent for h or ut ac a coolant hoses. ss

k ♦ Never reuse old coolant. Vol by

ility ab y li an pt ce

un le

♦

♦ Refractometer -T10007A♦ Refractometer -T10007BNote

Read precise value for the following tests at light-dark border. Using a pipette, place a drop of water on the glass to improve the readability of the light-dark border. The light-dark border can be clearly recognised on the “WATERLINE”. – Check concentration of coolant additive using refractometer (refer to operating instructions).

ht rig py Co t.

r fo ng

Scale -1- of the refractometer is calibrated for the coolant addi‐ tives G12++ and G12evo.

agen lksw Vo by

AG.

Prote cted by

c o p yri gh t. C op yi

Scale -2- of the refractometer is calibrated for the coolant addi‐ tive G13. – If anti-freeze protection is insufficient, drain some coolant and top up with coolant additive ⇒ page 89 . Note ♦ If the currently used coolant additive cannot be determined

precisely, use the scale -2- for coolant additive G13.

♦ Please observe disposal instructions!

88 4. Descriptions of work

rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um en

urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d p

Special tools and workshop equipment required

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ AG. Volkswagen AG d agen Maintenance es n w - oEdition 11.2022 s k o ol

Coolant level: checking, replenishing coolant if necessary es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

un le

ility ab y li an pt ce

4.32.1

♦ Delivery inspection: coolant level is at least at marking -1-.

AG.

♦ The excessive amount of coolant does not need to be ex‐ tracted as the coolant level in new vehicles will decrease after the system has been bled.

agen lksw Vo by

c o p yri gh t. C op yi

♦ At delivery inspection a coolant level above marking -1- is permissible.

do c um en

r fo ng

Version 1

rrectness of i t to the co nform spec at i h re o n wit in t his

– Check coolant level in coolant expansion tank with motor cold.

ht rig py Co t.

–

t gu ara nte eo ra c

yV db ise again. r Check coolant additive concentration after road test tho au s s

Prote cted by

♦ Inspection: coolant level is above “MIN. marking” -2-. Version 2

♦ Delivery inspection: coolant level is at least at marking -1-. ♦ At delivery inspection a coolant level above marking -1- is permissible. ♦ The excessive amount of coolant does not need to be ex‐ tracted as the coolant level in new vehicles will decrease after the system has been bled. ♦ Inspection: coolant level is above “MIN. marking” -2-. – If coolant is too low, add required amount according to mix‐ ing ratio.

4. Descriptions of work

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 Note

If fluid loss is greater than can be expected through normal use, determine source and rectify (repair measure).

Mixing ratio

Anti-freeze protection to

ag ksw Vol approx. 40% y b ed ris approx. 50 % o h ut a ss

Distilled water does not gu ara nte eo ra c

approx. 60 % approx. 50 %

agen lksw Vo by

AG.

Prote cted by

c o p yri gh t. C op yi

90 4. Descriptions of work

do c um en

r fo ng

rrectness of i t to the co nform spec at i h re o n wit in t his

es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

ility ab y li an pt ce

un le

-25°C -36 °C

Coolant additive portionolkswagen AG en AG. V

ht rig py Co t.

4.32.2

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

4.33

AG. Volkswagen AG d agen oes ksw not l o gu yV b ara Note d e nte is r o eo h ut ra a c s Due to the differing constitution of tap s water in the various

countries and regions, distilled water must be used for mix‐ ing with coolant concentrate. es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

un le

ility ab y li an pt ce

♦

Cooling system for high-voltage sys‐ tem: checking coolant additive and coolant level

♦ Only use coolant additives approved for the vehicle ⇒ Elec‐

rrectness of i t to the co nform spec at i h re o n wit in t his

tronic parts catalogue (ETKA). Other coolant additives may reduce corrosion protection substantially. The resulting dam‐ age could lead to loss of coolant and subsequent severe damage to the motor.

♦ Mixed in the proper proportions, coolant inhibits frost and

corrosion damage as well as scaling. Such additives also raise the boiling point of the coolant. For this reason, the cooling system must be filled all-year-round with coolant ad‐ ditives.

♦ Because of its high boiling point, the coolant improves en‐

gine reliability under heavy loads, particularly in countries with tropical climates.

♦ The refractometer -T10007A- or refractometer -T10007B-

do c um en

ht rig py Co t.

r fo ng

must be used to determine the current anti-freeze value.

agen lksw Vo by

AG.

Prote cted by c o py rig ht . C op yi

♦ Scale -1- of the refractometer is calibrated for the coolant

additives G12++ and G12evo.

♦ Scale -2- of the refractometer is calibrated for the coolant

additive G13.

♦ If it is not possible to ensure that the same type of coolant

additive is filled: always determine anti-freeze protection us‐ ing the scale for G13.

♦ Frost protection must be guaranteed down to -25°C as a

4. Descriptions of work

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 ♦ The coolant concentration must not be reduced by adding

water even in warmer seasons and in warmer countries. Frost protection must be guaranteed down to at least -25°C.

. Volkswagcorresponds en AG ♦ The temperature reading on the arefractometer gen AG do

es n ksw to the »ice flocculation point«. ot g Vol Flakes of ice may start form‐ ua by temperature. ing in the coolant below this d ran se i or

th ♦ Never reuse old coolant. au un le

Coolant level: checking, replenishing coolant if necessary

rrectness of i t to the co nform spec at i h re o n wit in t his

4.33.1

Note

If the coolant expansion tank is sealed with a lead seal -1-, seal it again after checking or replenishing the coolant level.

agen lksw Vo by

AG.

Prote cted by

c o p yri gh t. C op yi

Delivery inspection

Coolant level at lower edge of welded rim -3- of coolant expan‐ sion tank or above: – No activity required, coolant level OK. Coolant level between lower edge of welding rim -3- and “MIN. mark” -4- of coolant expansion tank: – Replenish coolant up to “max. mark” -2-. – Fit a new lead seal to coolant expansion tank. Coolant level below “min. mark” -4-. – Check cooling system for leaks ⇒ 4-cyl. injection engine (hy‐ brid); Rep. gr. 19; Cooling system/coolant. – Replenish coolant up to “max. mark” -2-. – Fit a new lead seal -1- to coolant expansion tank. 2-

1st oil change service at 15,000 km or after 1 year

Coolant level at “MAX. marking” -2-: – No action necessary. Coolant level between “MIN. marking” -4- and “MAX. marking” -2-:

92 4. Descriptions of work

ht rig py Co t.

r fo ng

– Check coolant level in coolant expansion tank with motor cold.

do c um en

es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

coolant hoses.

ility ab y li an pt ce

♦ Use only a water/coolant additive mixture as a slip agent for

tee or ac

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 – Check coolant additive ⇒ page 93 . – Replenish coolant up to “max. mark” -2-. – Fit a new lead seal to coolant expansion tank. Coolant level below “min. mark” -4-. lksw

agen AG AG. Vo injection en4-cyl. – Check cooling system for leaks engine does (hy‐ ag⇒ ksw not l o brid); Rep. gr. 19; Cooling system/coolant. V gu y b

ara nte e

d se

i or to “max. mark” -2-. – Replenish coolantthup au

un le

Anti-freeze protection: checking, re‐ plenishing coolant additive if necessary

Special tools and workshop equipment required ♦ Refractometer -T10007A♦ Refractometer -T10007BNote

ht rig py Co t.

Scale -1- of the refractometer is calibrated for the coolant addi‐ tives G12++ and G12evo.

rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um en

urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d p

4.33.2

or ac ility ab y li an pt ce

s – Fit a new lead sseal -1- to coolant expansion tank.

agen lksw Vo by

AG.

Prote cted by

c o p yri gh t. C op yi

Scale -2- of the refractometer is calibrated for the coolant addi‐ tive G13. – If anti-freeze protection is insufficient, drain some coolant and top up with coolant additive ⇒ page 92 .

4. Descriptions of work

Note

♦ If the currently used coolant additive cannot be determined

precisely, use the scale -2- for coolant additive G13.

♦ Please observe disposal instructions! – Check coolant additive concentration after road test again.

Mixing ratio

Anti-freeze protection to -25°C -36 °C

Distilled water

approx. 40% approx. 50 %

approx. 60 % approx. 50 %

r fo ng

Air filter: clean housing and renew filter element c o p yri gh t. C op yi

Air filter element: removing and installing, 1.4 l TSI engines ⇒ page 95

Prote cted by

Air filter element: removing and installing, 2.0 l TSI engines ⇒ page 98 Air filter element: removing and installing, common rail engines, version 1 ⇒ page 98 Air filter element: removing and installing, common rail engines, version 2 ⇒ page 99 Air filter element, common rail engine, engine code CUAA: re‐ moving and installing ⇒ page 101 Special tools and workshop equipment required ♦ Spring-type clip pliers -VAS 6499-

♦ Torque wrench

94 4. Descriptions of work

AG.

Air filter element: removing and installing, 1.5 l TSI engines ⇒ page 97

agen lksw Vo by

4.34

Coolant additive portion

ht rig py Co t.

4.33.3

rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um en

urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d p

un le

ility ab y li an pt ce

AG. Volkswagen AG d agen oes ksw not l o V gu y b ara d e nte isShooting Arteon 2018 ➤, Arteon 2021 ➤, Arteon Brake 2021 ➤ r o eo h t u ra Maintenance - Edition 11.2022 s a c s

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 Note ♦ Always use genuine part for air filter element: see Electronic

parts catalogue (ETKA).

♦ Use a silicone-free lubricant when installing the intake hose. ♦ When installing the air filter element, ensure that it is proper‐

ly centred in the mounting in lower part of air filter.

♦ Hose connections and hoses for charge air system must

be free of oil and grease before assembly. Do not use lubri‐ cants containing silicone.

♦ Secure all hose connections with the correct type of hose

clips (same as original equipment): see Electronic parts catalogue (ETKA).

4.34.1

olkswagen AG en AG. V

does wag Air filter element:Vremoving and instal‐ not olks gu y b ara d e ling, 1.4 l TSIorisengines nte

un le

eo ra c

th au s s

ility ab y li an pt ce

Removing

rrectness o f i t to the co n f orm spec atio h re n wit

es, in part or in w l purpos hole ercia , is n m ot com

pe rm itte d

– Pull air intake hose -1- off upper part of air filter -2-.

in t his d o cu m en

ht rig py Co t.

r te o iva r rp fo ng

– Release hose clips -1- and -2-.

agen lksw Vo by

AG.

Prote cted by

c o p yri gh t. C op yi

– Pull air filter housing in -direction of arrow- off ball studs. – Pull off both air hoses. – Remove air filter housing completely, and place it down. – Unscrew bolts -1-.

4. Descriptions of work

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

olkswagair en AG – Carefully release retaining tabs -arrows- onagupper en AG. Vpart of does ksw not l filter one after the other. o V g

un le

ua ran tee

pe rm itte d

The retaining tabs may break.

rrectness of i t to the co nform spec a t i h re o n in wit thi s

es, in part or in w l purpos hole ercia , is n m ot com

– Remove upper part of air filter housing and remove air filter element. Installing

or ac ility ab y li an pt ce

Note

by ed ris o th au

– Check air filter housing, air mass meter and water drains for soiling and clean them if necessary ⇒ page 102 .

AG.

– Screw in bolts -4-, and tighten them to specified torque. – Check ball stud grommets -5- for damage, and renew them as necessary. – Position air filter housing centrally on ball studs, and press it on firmly. – Fit both air ducts to air filter housing. – Fit hose clips.

96 4. Descriptions of work

agen lksw Vo by

Prote cted by c o py rig ht . C op yi

– Carefully engage retaining tabs one after the other.

ht rig py Co t.

– Fit lower part of air filter -3- onto upper part of air filter -1-.

do c um en

r te o iva r rp fo g n

– Insert air filter element -2- centrally into mounting in air filter upper part -1-.

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

n AG. Volkswagen AG do es n wage s k l ot g Vo y ua b – Fit air intake hose -1- onto upper part of airedfilter -2-. ran ir s tee o h t or u Specified torque Nm ac a ss un le

pe rm itte d

r te o iva r rp fo ng

agen lksw Vo by

c o p yri gh t . C op yi

AG.

Prote cted by

– Remove air filter element -2-.

in t his d o cu m en

– Unscrew securing bolts -arrows- from upper part of air filter housing -1- and lift it together with air ducts to one side.

ht rig py Co t.

Removing

es, in part or in w l purpos hole ercia , is n m ot com

Removing and installing air filter ele‐ ment, 1.5 l TSI engines

rrectness o f i t to the co n f orm spec atio h re n wit

4.34.2

1.5

ility ab y li an pt ce

Securing bolts -4-

Installing – Check air filter housing, air mass meter and water drains for soiling and clean them if necessary ⇒ page 102 . – Insert air filter element -2- centrally into mounting in lower part of air filter. – Carefully fit upper part of air filter onto lower part of air filter without applying excessive force. Screw in securing bolts -arrows-, and tighten them to specified torque. Specified torque

Securing bolts -arrows-

1.5

4. Descriptions of work

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

4.34.3

Air filter element: removing and instal‐ ling, 2.0 l TSI engines

AG. Volkswagen AG d agen oes ksw not l o gu yV b ara d e nte is r o eo h ut ra a c s s

– Pull vacuum hose -1- off upper part of air filter.

– Unscrew securing bolts -arrows- from upper part of air filter and lift it together with air ducts to one side. – Remove air filter element -2-. Installing

– Check air filter housing, air mass meter and water drains for soiling, and clean them, if necessary ⇒ page 102 . – Insert air filter element centred into mounting in lower part of air filter.

Removing

– Unscrew securing bolts -arrows- from upper part of air filter and lift it together with air ducts to one side. – Remove air filter element -1-.

98 4. Descriptions of work

AG.

Air filter element: removing and instal‐ ling, common rail engines

1.5

agen lksw Vo by

4.34.4

Prote cted by c o py rig ht . C op yi

Securing bolts

ht rig py Co t.

Specified torque

r fo ng

– Carefully fit upper part of air filter onto lower part of air filter without applying excessive force. Screw in securing bolts and tighten them to specified torque.

rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um en

urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d p

ility ab y li an pt ce

un le

Removing

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

n AG. Volkswagen AG do es n wage s k l ot g o yV ua b d ran ir se tee o h t or u ac a ss

ility ab y li an pt ce

un le

Checking position of warm air flap

Note

rrectness o f i t to the co n f orm spec atio h re n wit

es, in part or in w l purpos hole ercia , is n m ot com

pe rm itte d

– Check position of warm air flap -1- in lower part of air filter. The warm air flap must close completely at temperatures above +12°C.

The snow screen land warm air flap are not fitted on all vehi‐ cles. Installing

– Check air filter housing, air mass meter and water drains for soiling, and clean them, if necessary ⇒ page 102 . – Insert air filter element centred into mounting in lower part of air filter. r te o iva r rp fo ng

agen lksw Vo by

AG.

Prote cted by

4.34.5

c o p yri gh t . C op yi

Securing bolts

ht rig py Co t.

Specified torque

in t his d o cu m en

– Carefully fit upper part of air filter onto lower part of air filter without applying excessive force. Screw in securing bolts and tighten them to specified torque.

1.5

Removing and installing air filter ele‐ ment, common rail engines, version 2

Removing

– Unscrew and remove bolts -arrows- from upper part of air filter. – Lift upper part of air filter -1-.

4. Descriptions of work

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 – Remove air filter element -2-.

rrectness of i t to the co nform spec a t i h re o n in wit thi s

es, in part or in w l purpos hole ercia , is n m ot com

pe rm itte d

ility ab y li an pt ce

un le

Checking position of warm air flap

AG. Volkswagen AG d agen oes ksw not l o V gu by ara d e nte is r o eo h ut ra a c s s

Note

The warm air flap is not installed in all vehicles.

AG.

– Insert air filter element centred into mounting in lower part of air filter.

agen lksw Vo by

Prote cted by c o p yri gh t. C op yi

– Check air filter housing, air mass meter and water drains for soiling and clean them if necessary ⇒ page 102 .

ht rig py Co t.

Installing

– Carefully fit upper part of air filter onto lower part of air filter without applying excessive force. Screw in securing bolts and tighten them to specified torque. Specified torque

Securing bolts

1.5

100 4. Descriptions of work

do c um en

r te o iva r rp fo g n

– Check position of warm air flap -1- in lower part of air filter. The warm air flap must close completely at temperatures above +12°C.

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

4.34.6

Air filter element, common rail engine, engine code CUAA: removing and in‐ stalling

Removing

– Unclip line -1- on upper part of air filter. AG. Volkswagen A

n G do upper part of air agebolts – Unscrew and remove -arrows- from es n ksw ot g Vol y filter. ua db r an tee or ac

e ris

ho part of air filter -2-. – Lift upper ut

un le

ility ab y li an pt ce

s – Remove air filter element -3-. es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

Installing

– Insert air filter element -3- centrally into mounting in lower part of air filter. – Carefully fit upper part of air filter -2- onto lower part of air filter without applying excessive force. Screw in securing bolts and tighten them to specified torque. – Clip line -1- into upper part of air filter. Specified torque

Nm 1.5

do c um en

ht rig py Co t.

r fo ng

Securing bolts

rrectness of i t to the co nform spec at i h re o n wit in t his

– Check housing and water drains for soiling, clean if necessa‐ ry.

4. Descriptions of work

101

agen lksw Vo by

AG.

Prote cted by

c o p yri gh t. C op yi

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

4.34.7

Fuel filter housing: cleaning

Note ♦ The air mass value may be falsified due to excessive soiling

or moisture. This would lead to loss of power because AG. Volkaswagen AG d oes smaller injection quantity is calculated. olkswagen no V by

ed ♦ Please observe disposal instructions! ris

tho

pe rm itte d

un le

tion.

ility ab y li an pt ce

au ♦ The cleaning is carried out according to a separate calcula‐ ss

t gu ara nte eo ra c

rrectness o f i t to the co n f orm spec atio h re n wit

es, in part or in w l purpos hole ercia , is n m ot com

– Check for salt residue, dirt and leaves in air mass meter and air intake hose (engine intake side). – Check water drain hose in lower part of air filter housing for dirt and clogging. – Remove salt residues, dirt and leaves from upper and lower part of air filter housing using a vacuum cleaner if necessary.

4.35.1

Specification for using multi-purpose additive for diesel fuel

♦ In the market mentioned below there is a particularly high ♦ To counteract the formation of deposits, a multi-purpose ad‐

AG.

ditive for diesel fuel must be added.

♦ Only additives compliant with VW 505 26 (multi-purpose ad‐

ditive G 001 790 M3) may be used.

♦ After adding the additive, it is extremely important to fully

refuel the vehicle to achieve optimal effectiveness of the additive.

– During each change oil service, fill entire bottle of multi-pur‐ pose additive for diesel fuel into regular fuel tank. Country Russia

102 4. Descriptions of work

agen lksw Vo by

Prote cted by c o p yri gh t. C op yi

risk of deposits forming on the injectors and inlet valves owing to the quality of the fuel.

in t his d o cu m en

Note

r te o iva r rp fo ng

Multi-purpose additive for diesel fuel: adding

ht rig py Co t.

4.35

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

4.35.2

Recommendation for using multi-pur‐ pose additive for diesel fuel

Note ♦ In the following markets with a high risk of coke and deposit

formation, the addition of a multi-purpose additive is recom‐ mended owing to the lower concentration of additives in the diesel fuel.

♦ Only additives compliant with VW 505 26 (multi-purpose ad‐

ditive G 001 790 M3) may be used.

♦ After adding the additive, it is extremely important to fully

refuel the vehicle to achieve optimal effectiveness of the additive.

♦ The multi-purpose additive can also be used in all other

markets that are not listed in the table.

– During each change oil service, fill entire bottle Gof. Vmulti-pur‐ olkswagen AG nA does pose additive for diesel fuel into regularlksfuel wagetank. n

do c um en

agen lksw Vo by

AG.

un le

pe rm itte d

r te o iva r rp fo g n

rrectness of i t to the co nform spec a t i h re o n in wit thi s

es, in part or in w l purpos hole ercia , is n m ot com

Liberia Mali Morocco Mauritania Macedonia Moldova Myanmar Dutch Overseas Territories Nigeria Pakistan Panama Paraguay Saudi Arabia Senegal Sierra Leone Zimbabwe Sri Lanka and the Maldives South Africa Sudan South Sudan Surinam Syria Thailand Togo Trinidad and Tobago Chad Turkmenistan Ukraine USA

ility ab y li an pt ce

Afghanistan ss Egypt Albania Equatorial Guinea Argentina Azerbaijan Belize Benin Bhutan Brazil Brunei Burkina Faso China Democratic Republic of the Congo Dominican Republic El Salvador Ivory Coast Fiji Gambia Georgia Ghana Guatemala Guinea Guinea-Bissau Guyana Haiti Honduras Indonesia India

ot g ua ran tee or ac

Country

ht rig py Co t.

o yV db e ris tho au

4. Descriptions of work

103

Prote cted by c o p yri gh t. C op yi

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ AG. Volkswagen AG d agen oes Maintenance - Edition 11.2022 ksw not l o V

pe rm itte d r te o iva r rp fo ng

es, in part or in w l purpos hole ercia , is n m ot com

rrectness o f i t to the co n f orm spec atio h re n wit

Specification for using multi-purpose additive for petrol fuel

Prote cted by c o py rig ht . C op yi

Note ♦ In the market mentioned below there is a particularly high

risk of deposits forming on the injectors and inlet valves owing to the quality of the fuel.

♦ To counteract the formation of deposits, a multi-purpose ad‐

ditive for petrol fuel must be added.

♦ Only additives compliant with VW 507 53 B (multi-purpose

additive G 001 780 M3) may be used.

♦ Observe the dosing instructions on the additive container. ♦ After adding the additive, it is extremely important to fully

refuel the vehicle to achieve optimal effectiveness of the additive.

– Fill multi-purpose additive for petrol fuels into regular fuel tank during each oil change service. Country Russia

104 4. Descriptions of work

AG.

4.36.1

agen lksw Vo by

Multi-purpose additive for petrol fuel: add

in t his d o cu m en

4.36

ht rig py Co t.

un le

Belarus Venezuela Central African Republic Zimbabwe

gu ara nte eo ra c ility ab y li an pt ce

Iraq Jamaica Jordan Cayman Islands Cambodia Cameroon Canada Cape Verde Caribbean, left-hand traffic Columbia Laos Lebanon

by ed ris o Country th au ss

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

4.36.2

Recommendation for using multi-pur‐ pose additive for petrol fuel

Note

additive G 001 780 M3) may be used.

rrectness of i t to the co nform spec at i h re o n wit in t his

♦ Observe the dosing instructions on the additive container. ♦ After adding the additive, it is extremely important to fully

refuel the vehicle to achieve optimal effectiveness of the additive.

♦ The multi-purpose additive can also be used in all other

markets that are not listed in the table.

– Fill multi-purpose additive for petrol fuels into regular fuel tank during each oil change service.

r fo ng

ht rig py Co t.

agen lksw Vo by

AG.

Prote cted by

c o p yri gh t . C op yi

Algeria Bahrain Bolivia Brazil China Ghana Indonesia Iraq Iran Japan Yemen Jordan Cambodia Qatar Columbia Kuwait Lebanon Malaysia Mauritius Niger Nigeria Oman Pakistan Peru Philippines Saudi Arabia Senegal Singapore

Country

do c um en

es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

♦ Only additives compliant with VW 507 53 B (multi-purpose

ility ab y li an pt ce

in the petrol.

un le

♦

n AG. Volkswagen AG do es n wage s k l ot o yV b In the following marketsswith a high risk of coke and deposit guaran d ir e tee formation, the addition hoof a multi-purpose additive is recom‐ or ut elevated olefin content and aromatics ac a mended owing to the ss

4. Descriptions of work

105

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 Country Surinam Syria Chad Uzbekistan United Arab Emirates Vietnam

4.37

Motor and components in motor com‐ AG. Volkswagen AG d agen oes ksw not l partment: inspecting for leaks and o gu yV b ara d e nte damage (from above and below) horis e t au

un le

– Check motor and components in motor compartment for leaks and damage. – Lines, hoses and connections ♦ Fuel system ♦ Cooling and heating system ♦ Lubrication system ♦ Air conditioning system ♦ Intake system ♦ And brake system

♦ Any detected defects must be rectified as repair measures.

use, determine source and rectify (repair measure).

106 4. Descriptions of work

AG.

♦ If fluid loss is greater than can be expected through normal

agen lksw Vo by

Prote cted by c o py rig ht . C op yi

Note

ht rig py Co t.

r fo ng

Check for leaks, abrasion, porousness, cracks, correct seating and attachment in retainers.

rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um en

urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d p

– If necessary, remove motor compartment cover (noise insu‐ lation) -bottom- ⇒ page 110 . Inspect as follows:

or ac ility ab y li an pt ce

– Remove engine cover panel if necessary. ⇒ pagess107

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

4.38

Engine cover panel “top”: removing and installing

Engine cover panel: removing and installing, 2.0 l TSI engines ⇒ page 107 . Engine cover panel: removing and installing, common rail diesel engines ⇒ page 108

4.38.1

Engine cover panel: removing and in‐ stalling, 2.0 l TSI engines

Version 1 Removing – Carefully pull engine cover panel off ball studs one after the other -arrows-. Do not pull off engine cover panel abruptly or only on one side (image shows example).

– Position engine cover panel, paying attention to oil filler neck and dipstick. – Press engine cover panel onto ball studs, first on left and then on right.

r fo ng

Removing

ht rig py Co t.

Version 2

rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um en

urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d p

– To prevent damage, do not strike engine cover panel with the fist or a tool.

ility ab y li an pt ce

un le

Installing

n AG. Volkswagen AG do es n wage s k l ot g o yV ua b d ran ir se tee o h t or u ac a ss

agen lksw Vo by

Prote cted by

c o p yri gh t . C op yi

– Carefully pull engine cover panel off retaining pins one after the other -arrows-. Do not pull off motor cover panel abruptly or only on one side.

4. Descriptions of work

107

AG.

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 Installing – To prevent damage, do not strike engine cover panel with the fist or a tool. – Position engine cover panel, paying attention to oil filler neck and dipstick. – Press engine cover panel into rubber grommets first on the left side and then on the right side.

4.38.2

Engine cover panel, common rail die‐ sel engines: removing and installing

Version 1 Removing

– Carefully pull engine cover panel off retaining pins one after the other -arrows-. Do not pull off motor cover panel abruptly or only on one side. AG. Volkswagen A n wage olks V y db se riengine o To prevent damage, do not strike cover panel with h ut a the fist or a tool. ss

G do es n ot g ua ran tee or ac ility ab y li an pt ce

un le

–

– Press engine cover panel into rubber grommets first on the left side and then on the right side. Version 2

r fo ng

Removing

agen lksw Vo by

AG.

Prote cted by

c o p yri gh t . C op yi

108 4. Descriptions of work

rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um en

urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d p

– Position engine cover panel, paying attention to oil filler neck and dipstick.

ht rig py Co t.

Installing

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

NOTICE Danger of leaks in fuel system due to damaged components. – When removing or installing, make sure that no other com‐ ponents are moved. – Carefully pull engine cover panel off retaining pins one after the other -arrows-. Do not pull off motor cover panel abruptly or only on one side. Installing – To prevent damage, do not strike engine cover panel with the fist or a tool. – Position engine cover panel, paying attention to oil filler neck and dipstick. – Press engine cover panel into rubber grommets first on the left side and then on the right side as seen facing direction of travel.

4.39

Engine data plate with Certification Test Group code: checking if fitted and for condition, also checking CTG code against the code in the engine control unit Note

un le

On Arteon models, the CTG label is located on the inside of the bonnet -3-.

r fo ng

Make sure that the CTG label is present, readable and not damaged.

rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um en

urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d p

♦ Vehicle diagnostic tester

ht rig py Co t.

♦ 2D scanner -VAS 6161/1A-

ility ab y li an pt ce

AG. Volkswagen AG d agen oes ksw not l o V gu y b ara Applies only to USA, Canada and Mexico. d e nte is r o eo h ut ra a c s Special tools and workshop equipment required s

agen lksw Vo by

4. Descriptions of work

109

AG.

Prote cted by c o py rig ht . C op yi

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

– Read the code on the CTG label -1-, or scan the QR code -2- using the 2D scanner -VAS 6161/1A-, and compare it against the code in the engine control unit. If the CTG code deviates from the code in the control unit, or if the label is not readable, damaged or not at all present, order a new CTG label via the Electronic parts catalogue (ETKA).

4.40

Motor compartment cover (noise insu‐ lation) “bottom”: removing and instal‐ ling

Procedure The procedure of removing the engine cover panel -bottom(noise insulation) can be found in Workshop Manual under: ⇒ General body repairs, exterior; Rep. gr. 66; Noise insulation; Assembly overview – noise insulation . Volkswag

4.41

Engine oil level: checking

Note the following:

en AG does not gu ara nte eo ra c

pe rm itte d

un le

– After shutting off engine, wait at least 3 minutes so that the oil can flow back into the sump.

– Pull dipstick out again and read oil level. Note

♦ The oil level must always be in the upper third of area -B-

for the delivery inspection. This way, you will achieve the greatest possible customer satisfaction.

♦ The oil-change quantity in the service table was determined

r te o iva r rp fo ng

agen lksw Vo by

AG.

Prote cted by

c o p yri gh t. C op yi

110 4. Descriptions of work

ht rig py Co t.

experimentally and is sufficient for the technical functionality of the engine in all operating conditions. During all other service events, the oil level must be checked and corrected as necessary if the customer requests this. This enables an additional topping-up to the specified oil quantity to the upper limit of the dip stick. Due to tolerances, the oil temper‐ ature and the drip time, various quantities may be required for topping up.

in t his d o cu m en

es, in part or in w l purpos hole ercia , is n m ot com

rrectness o f i t to the co n f orm spec atio h re n wit

– Pull out dipstick, wipe with a clean cloth and push dipstick in again to limit stop.

ility ab y li an pt ce

AG agen ksw l o yV db ise r tho au s s

AG. Volkswagen AG d agen oes ksw not l o V gu by ara d e nte is r o eo h ut ra a c s s

pe rm itte d

ility ab y li an pt ce

un le

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

rrectness o f i t to the co n f orm spec atio h re n wit

es, in part or in w l purpos hole ercia , is n m ot com

A - Oil must not be replenished. B - Oil can be replenished up to the MAX. mark -A-. C - Oil must be replenished. The oil level must then be at least in the upper half of the measuring area -B-. – If oil level is above MAX. mark -A-, drain or extract excess oil to prevent damage to catalytic converter. – If the oil level is below MIN. marking -C- replenish a suffi‐ cient amount of oil (at least 0.5 l) ⇒ page 9 .

4.42

Engine oil: draining, renewing oil filter and filling engine oil r te o iva r rp fo ng

Engine oil: draining and renewing oil filter, 2.0 l TSI engines ⇒ page 114

agen lksw Vo by

Prote cted by c o p yri gh t. C op yi

AG.

Draining engine oil and renewing oil filter, common rail diesel engines, version 2 ⇒ page 119

ht rig py Co t.

Draining engine oil and renewing oil filter, common rail diesel engines, version 1 ⇒ page 117

in t his d o cu m en

Engine oil: draining and renewing oil filter, 1.4 l TSI engine and 1.5 l TSI engines ⇒ page 111

Engine oil: replenishing ⇒ page 121

4.42.1

Engine oil: draining and renewing oil filter, 1.4 l TSI engine and 1.5 l TSI engines

NOTICE If engine oil is removed by extraction, the amount of oil re‐ maining in the sump afterwards will be too high. Catalytic converter damage due to excessive engine oil in the engine. – Always drain engine oil. – Extracting engine oil is not permitted. Special tools and workshop equipment required

4. Descriptions of work

111

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 ♦ Used oil collector and extractor -VAS 6622A-

♦ Oil spill cloth ♦ Oil filter tool -3417-

♦ Torque wrench

AG. Volkswagen AG d agen oes ksw not l o V gu by ara d e nte is r o eo h ut ra a c s s

– Remove “lower” engine compartment cover (noise insula‐ tion) ⇒ page 110 . – Loosen oil filter element -arrow- using oil filter tool -3417-, and remove oil filter. Installing oil filter

– Clean sealing surface for oil filter on engine. – Moisten rubber seal of oil filter element with engine oil.

agen lksw Vo by

AG.

112 4. Descriptions of work

Prote cted by c o p yri gh t. C op yi

Oil filters

ht rig py Co t.

Specified torque

r fo ng

– Screw in oil filter element -arrow- using oil filter tool -3417-, and tighten it to specified torque. 20

rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um en

urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d p

ility ab y li an pt ce

un le

Removing oil filter

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

Draining engine oil on 1st oil change ⇒ page 113 Draining engine oil after 1st oil change ⇒ page 113

AG. Volkswagen AG d agen oes ksw not l o gu yV b ara d e nte is r o eo h ut ra a c s s

rrectness o f i t to the co n f orm spec atio h re n wit

– Unscrew and dispose of oil drain plug with captive seal -1-. – Let engine oil drain. Note

Please observe disposal instructions! r te o iva r rp fo ng

– Screw in new oil drain plug -3- with new seal -2- hand-tight first and then tighten it to specified torque. Draining engine oil after 1st oil change

in t his d o cu m en

es, in part or in w l purpos hole ercia , is n m ot com

pe rm itte d

ility ab y li an pt ce

un le

Draining engine oil on 1st oil change

4. Descriptions of work

113

ht rig py Co t.

agen lksw Vo by

AG.

Prote cted by c o py rig ht . C op yi

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 – Unscrew oil drain plug -2- and dispose of seal -3-. Note

The oil drain plug will be reused after the 1st oil change. – Let engine oil drain. Note

un le

ility ab y li an pt ce

n AG. Volkswagen AG do es n wage s k l ot g o yV ua b d ran Please observe disposal instructions! ir se tee o h t or u ac a s s – Screw in oil drain plug -2- with new seal -1- hand-tight and

– Install engine compartment cover (noise insulation) “bottom” ⇒ page 110 . Oil drain plug

– Replenish engine oil. Engine oil capacity: ♦ ⇒ Maintenance tables

Nm 30

♦ Engine oil: capacities and specifications ⇒ page 122

NOTICE

♦ Used oil collector and extractor -VAS 6622A-

♦ 32 mm socket ♦ Torque wrench ♦ Oil spill cloth ♦ Assembly tool -T10549-

114 4. Descriptions of work

Prote cted by

Special tools and workshop equipment required

AG.

Engine oil: draining and renewing oil filter, 2.0 l TSI engines

agen lksw Vo by

c o p yri gh t . C op yi

4.42.2

ht rig py Co t.

r fo ng

Excessive torque can cause leaks in the area of the oil drain plug or even damage. – Tighten oil drain plug to specified torque.

rrectness of i t to the co nform spec at i h re o n wit in t his

Specified torque

do c um en

es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

then tighten it firmly to specified torque.

– Remove engine cover panel ⇒ page 107 .

– Wait a few minutes for engine oil to flow back from oil filter housing.

agen lksw Vo by

AG.

Prote cted by

c o p yri gh t. C op yi

Note

ht rig py Co t.

– Remove complete oil filter housing -arrow-.

do c um en

r te o iva r rp fo g n

– Loosen oil filter housing -arrow- using 32 mm hexagon sock‐ et insert.

rrectness of i t to the co nform spec a t i h re o n in wit thi s

es, in part or in w l purpos hole ercia , is n m ot com

pe rm itte d

un le

ility ab y li an pt ce

AG. Volkswagen AG d agenArteon 2018 ➤, oes Arteon ksw not 2021 ➤, Arteon Shooting Brake 2021 ➤ l o V gu y b Maintenance - Edition 11.2022 ara d nte ise r o e h t or Removing oil filters au ac s

Ensure that no engine oil drips onto engine. Use a cloth for collecting any dripping oil. Oil filter: renewing element

– Pull out filter element. – Moisten new O-ring -2- with engine oil and insert it into groove in oil filter housing -1-. – Renew filter element -3-. Note

Disregard the remaining items -4, 5 and 6-.

4. Descriptions of work

115

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

– Tighten oil filter housing -arrow- to specified torque using 32 mm hexagon socket insert. Specified torque

Oil filter housing

Note ♦ Depending on version, the vehicle is fitted with a sump made

of sheet-metal or plastic.

♦ After the engine oil has been drained, the oil drain plug

(sheet-metal sump) or the sealing plug (plastic sump) must always be renewed. This prevents leaks.

♦ Please observe disposal instructions! – Remove “lower” engine compartment cover (noise insula‐ en AG. Volkswagen AG does wag tion) ⇒ page 110 . no olks – Unscrew oil drain plug or sealing plug. ss

ility ab y li an pt ce

un le

– Let engine oil drain.

t gu ara nte eo ra c

yV db ise r tho au

– Install engine compartment cover (noise insulation) “bottom” ⇒ page 110 . Oil drain plug

– Replenish engine oil. Note

Nm 30

r fo ng

Proceed slowly when pouring in the engine oil. The filler neck is narrow, and the housing structure is directly underneath it. This causes the oil to run very slowly. If necessary, use oil filler funnel VAS 6842 for pouring in the engine oil.

AG.

116 4. Descriptions of work

agen lksw Vo by

♦ ⇒ Maintenance tables

Prote cted by c o p yri gh t. C op yi

Engine oil capacity:

ht rig py Co t.

Specified torque

do c um en

es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

rrectness of i t to the co nform spec at i h re o n wit in t his

– Screw in new oil drain plug together with seal hand-tight, and then tighten to specified torque. Or tighten new sealing plug to stop. Moisten new O-ring of sealing plug with engine oil before installing it.

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 ♦ Engine oil: capacities and specifications ⇒ page 122

NOTICE Excessive torque can cause leaks in the area of the oil drain plug or even damage. – Tighten oil drain plug to specified torque.

Draining engine oil and renewing oil filter, common rail diesel engines, ver‐ lkswagen AG. Volkswagen AG does n ot g o yV ua sion 1 db ran se

Special tools and workshop equipment required

un le

r fo ng

♦ Oil spill cloth

urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d p

♦ Torque wrench

rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um en

♦ 32 mm socket

tee or ac ility ab y li an pt ce

♦ Used oil collector and extractor -VAS 6622A-

ri ho ut a ss

ht rig py Co t.

4.42.3

agen lksw Vo by

AG.

Prote cted by

c o p yri gh t. C op yi

– Remove “lower” engine compartment cover (noise insula‐ tion) ⇒ page 110 . – Disconnect connector -1- from return-flow pump. – Unclip alternator cable -2- from clip -3- and swing it in -direction of arrow-.

4. Descriptions of work

117

n AG. Volkswagen AG do es n wage s k l ot g o yV ua b d ran ir se tee o h t or u ac a ss

rrectness of i t to the co nform spec at i h re o n wit in t his

es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

ility ab y li an pt ce

un le

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

– Unscrew oil drain plug -1- from screw cap -3- and drain engine oil.

– Pull out oil filter element -5-.

agen lksw Vo by

c o p yri gh t . C op yi

Oil filter: renewing element

ht rig py Co t.

r fo ng

– Remove screw cap -3- using 32 mm hexagon socket insert.

do c um en

Removing oil filter

Prote cted by

– Insert O-ring -2- in groove of oil drain plug for screw cap -1-. Screw in oil drain plug and tighten it to specified torque. AG.

– Moisten new O-ring -4- with engine oil and renew oil filter element -5-. – Screw on screw cap -3- and tighten it to specified torque using 32 mm hexagon socket insert. – Clip in alternator cables and connect connector to returnflow pump. – Clean all lines contaminated with engine oil using oil spill cloth. Specified torque

Screw cap for oil filter Oil drain plug in screw cap

25 5

– Remove oil drain plug. – Let engine oil drain. Note ♦ After the engine oil has been drained, the oil drain plug must

always be renewed. This prevents leaks.

♦ Please observe disposal instructions! – Screw in oil drain plug together with seal hand-tight and then tighten to specified torque.

118 4. Descriptions of work

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 . Volkswagen AG gen AG d

oes wa – Install engine compartment not olkscover (noise insulation) “bottom” gu yV b ara ⇒ page 110 . ed

nte eo ra c

ris ho

Specified torque s aut un le

♦ ⇒ Maintenance tables ♦ Engine oil: capacities and specifications ⇒ page 122

NOTICE

Excessive torque can cause leaks in the area of the oil drain plug or even damage. – Tighten oil drain plug to specified torque.

Special tools and workshop equipment required agen lksw Vo by

Prote cted by c o py rig ht . C op yi

♦ Used oil collector and extractor -VAS 6622A-

ht rig py Co t.

r fo ng

Draining engine oil and renewing oil filter, common rail diesel engines, ver‐ sion 2

do c um en

es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

Engine oil capacity:

rrectness of i t to the co nform spec at i h re o n wit in t his

– Replenish engine oil.

4.42.4

ility ab y li an pt ce

Oil drain plug

AG.

♦ 32 mm socket ♦ Torque wrench ♦ Oil spill cloth – Remove “lower” engine compartment cover (noise insula‐ tion) ⇒ page 110 .

– Disconnect connector -1- of coolant pump.

4. Descriptions of work

119

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 – Unscrew bolt -3- and swivel coolant pump -2- to one side.

– Remove screw cap -2- using 32 mm hexagon socket insert.

r fo ng

Oil filter: renewing element

agen lksw Vo by

AG.

Prote cted by c o p yri gh t. C op yi

– Pull out oil filter element -5-.

– Insert O-ring -2- in groove of oil drain plug for screw cap -1-. Screw in oil drain plug and tighten it to specified torque. – Moisten new O-ring -4- with engine oil and renew oil filter element -5-. – Screw on screw cap -3- and tighten it to specified torque using 32 mm hexagon socket insert. Further assembly is carried out in the reverse order. – Clean all lines contaminated with engine oil using oil spill cloth. Specified torque

Screw cap for oil filter Oil drain plug in screw cap Coolant pump bolt

25 5 9

120 4. Descriptions of work

rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um en

urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d p

un le

ility ab y li an pt ce

Removing oil filter

ht rig py Co t.

–

AG. Volkswagen AG d agen oes ksw not l o V gu by ara d e nte is r o eo h ut and drain ra Unscrew oil drain plug -1- from screw cap -2a c s s engine oil.

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 – Remove oil drain plug. – Let engine oil drain. Note ♦ After the engine oilnhas the oil drain plug must olkswadrained, gen A AG. Vbeen G do es n wage This prevents leaks. always be renewed. o olks V by

ed ♦ Please ris observe disposal instructions!

un le es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

ho ut a s sScrew in oil drain plug together with seal hand-tight and then ility ab y li an pt ce

–

t gu ara nte eo ra c

tighten to specified torque.

– Install engine compartment cover (noise insulation) “bottom” ⇒ page 110 . rrectness of i t to the co nform spec at i h re o n wit in t his

Specified torque Oil drain plug

– Replenish engine oil. Engine oil capacity: ♦ ⇒ Maintenance tables ♦ Engine oil: capacities and specifications ⇒ page 122

NOTICE

Nm 30

r fo ng

c o p yri gh t . C op yi

Engine oil: replenishing

agen lksw Vo by

AG.

Prote cted by

NOTICE

ht rig py Co t.

4.42.5

do c um en

Excessive torque can cause leaks in the area of the oil drain plug or even damage. – Tighten oil drain plug to specified torque.

The oil pressure warning lamp in the dash panel insert lights up after an oil change. Risk of damage to the engine if the accelerator pedal is de‐ pressed too early. – Run the engine at idling speed, and do not rev up! – Make sure not to rev up as long as the warning lamp is lit. Special tools and workshop equipment required ♦ Oil filler funnel -VAS 6842A♦ Adapter -VAS 6842/2♦ Adapter -VAS 6842/3A-

NOTICE Subjecting the oil filler funnel to lateral stress may damage the cylinder head cover. The locking devices for the filler cap will break off. This may result in oil leaks and subsequent damage to the engine. – Do not subject the oil filler funnel to lateral stress. – Use oil filler funnel -VAS 6842A- with suitable adapter if necessary to fill oil. 4. Descriptions of work

121

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 – Clean sealing surface in engine oil filler neck using a lint-free cloth prior to screwing in the cap. Engine oil: capacities and specifications up to model year ►2020 ⇒ page 122 Engine oil: capacities and specifications as of model year 2021► ⇒ page 123 Oil level: checking ⇒ page 110

4.43

Engine oil: capacities and specifica‐ tions up to model year ►2020

A new VW standard for engine oil - 508 00/509 00 - has been introduced for most Volkswagen engines. This is distinguished by reduced fuel consumption and CO2 emissions. The main facts are the following: ♦ VW 508 00/509 00 is a combined product that meets the petrol specification as VW 508 00 and the diesel specifica‐ tion as VW 509 00. ♦ Volkswagen recommends not using the new specifications for older engine generations. The recommended specifica‐ tions are allocated to the engines in this chapter. ♦ Engines with particulate filter (petrol and diesel) can also be filled with oil standard VW 504 00/507 00 when serviced. However, the caveat could be elevated fuel consumption and CO2 emissions. n AG. Volkswagen AG age lksw

does no

un le

ility ab y li an pt ce

o yV ♦ Engines without particulate filter can also be filled with oil t guar db an e is 01 when serviced. However, the standard VW 502 00/505 tee r ho t or caveat could be elevated fuel consumption and CO emis‐ u 2 ac a ss sions. es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

♦ The new oil is miscible.

rrectness of i t to the co nform spec at i h re o n wit in t his

♦ If oil with VW engine oil standard 508 00/509 00 is used in engines that are not recommended for this, engine damage could ensue. ♦ As of model year 2018, engines that are not recommended to be used with the new oil will have a notice (lock carrier/en‐ gine compartment) from which the oil standard to be used can be gleaned. ♦ For an overview of the engine oils approved by Volkswagen, please refer to Volkswagen ServiceNet or contact your im‐ porter ⇒ https://vw.servicenet.vwgroup.com/de/service-tech‐ nik/inspektion-und-wartung/oelfreigaben.html.

r fo ng

ht rig py Co t.

Prote cted by c o p yri gh t. C op yi

CJXA

2.0 l/206 kW

5.7

504 00

CZPB

2.0 l/140 kW

5.7

508 00, 504 00

DADA1)

1.5 l/110 kW

4.3

DADA2) DJHC

1.5 l/110 kW 2.0 l/206 kW 2.0 l/140 kW

502 00

4.3

508 00, 504 00

504 00

5.7 5.7

504 00 508 00, 504 00

502 00 504 00

504 00, 502 00 508 00, 504 00

AG.

122 4. Descriptions of work

508 00, 504 00

504 00, 502 00 508 00, 504 00, 502 00 508 00, 504 00, 502 00 508 00, 504 00

agen lksw Vo by

DKZA2)

do c um en

Arteon Petrol engines Oil quantity with VW engine oil standards filter (I) Engine code Capacity / out‐ With flexible With fixed service 3) put service Not compliant Applies only to with EN 228 EN 228 ⇒ page 33 502 00 502 00

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 Arteon Petrol engines Oil quantity with VW engine oil standards filter (I) Engine code Capacity / out‐ With flexible With fixed service 3) put service Not compliant Applies only to with EN 228 EN 228 ⇒ page 33 DLRB

2.0 l/200 kW

5.7

504 00

DNUA2)

2.0 l/200 kW

5.7

504 00

502 00 504 00

504 00, 502 00 504 00

1) Without petrol particulate filter 2) With petrol particulate filter 3) For USA and Canada, engine oil specifications on adhesive

label in engine compartment apply.

Diesel engines Engine code Capacity / output

urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d p

♦ As of model year 2022►, engines in specific markets are equipped with a label (lock carrier/engine compartment) stat‐ ing the oil standard and viscosity to be used.

ht rig py Co t.

r fo ng

♦ If oil with VW engine oil standard 508 00/509 00 is used in engines that are not recommended for this, engine damage could ensue.

rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um en

Engine oil: capacities and specifica‐ tions as of model year 2021►

agen lksw Vo by

AG.

c o p yri gh t. C op yi

♦ For an overview of the engine oils approved by Volkswagen, please refer to Volkswagen ServiceNet or contact your im‐ porter ⇒ https://vw.servicenet.vwgroup.com/de/service-tech‐ nik/inspektion-und-wartung/oelfreigaben.html.

505 01 507 00 507 00 507 00 507 00 509 00, 507 00 509 00, 507 00

ility ab y li an pt ce

4.44

VW engine oil standards With flexible service With fixed service

4.7 2.0 l/130 kW --2.0 l/176 kW 4.9 507 00 2.0 l/110 kW 4.7 507 00 2.0 l/110 kW 4.7 507 00 n AG. Volkswagen AG do 507 00 e g a 2.0 l/140 kW 4.7 es n ksw ot g Vol ua 00 2.0 l/110 kW sed by 5.5 509 00, 507 ran i te r o h t 2.0 l/110 kW 5.5 509 00, 507 00e or a au un le

CRGA CUAA DBGA DFGA DFHA DSRA DSRB

Arteon Oil quantity with fil‐ ter (I)

4. Descriptions of work

123

Prote cted by

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 Arteon Oil quantity with fil‐ ter (I)

Petrol engines Engine code Capacity / output

507 00

0W-30

4.9 4.7 4.7 4.7 5.5 5.5 5.5 5.5 5.5

507 00 507 00 507 00 507 00 509 00 509 00 509 00 509 00 507 00

0W-30 0W-30 0W-30 0W-30 0W-20 0W-20 0W-20 0W-20 0W-30

AG.

un le

r te o iva r rp fo ng

SAE class

4.7

agen lksw Vo by

es, in part or in w l purpos hole ercia , is n m ot com

rrectness o f i t to the co n f orm spec atio h re n wit

Prote cted by c o p yri gh t. C op yi

124 4. Descriptions of work

0W-30

in t his d o cu m en

2.0 l/130 kW 2.0 l/176 kW 2.0 l/110 kW 2.0 l/110 kW 2.0 l/140 kW 2.0 l/110 kW 2.0 l/110 kW 2.0 l/110 kW 2.0 l/110 kW 2.0 l/147 kW

Arteon Oil quantity with filter (I) VW standard

ht rig py Co t.

pe rm itte d

5.7 504 00 2.0 l/206 kW 2.0 l/140 kW 5.7 508 00 1.5 l/110 kW 4.3 508 00 1.4 l/115 kW 4.0 508 00 2.0 l/206 kW 5.7 504 00 2.0 l/140 kW 5.7 508 00 2.0 l/200 kW 5.7 504 00 2.0 l/206 kW 5.7 504 00 2.0 l/245 kW 5.7 504 00 2.0 l/235 kW 5.7 504 00 2.0 l/140 kW 5.7 508 00 . Volkswagen AG gen AG does a w s 2.0 l/200VkW 5.7 504 00 not olk gu y ara d b kW e 1.5ril/110 4.3 nte 508 00 s eo ho t u r a 00 l/224 kW 5.7 504 a2.0 c s s 2.0 l/140 kW 5.7 508 00

Diesel engines Engine code Capacity / output CRGA CUAA DBGA DFGA DFHA DSRA DSRB DTSA DTSB DTUA

SAE class

ility ab y li an pt ce

CJXA CZPB DADA DGEB DJHC DKZA DLRB DNFE DNFF DNFG DNNA DNUA DPCA DSFB DUNA

VW standard

0W-20 0W-20 0W-20 0W-30 0W-20 0W-30 0W-30 0W-30 0W-30 0W-20 0W-30 0W-20 0W-30 0W-20

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 G. Volkswagen AG do es n ot g ua ran tee or ac

Panoramic sliding sunroof

♦ Employing the new special lubricant results in a new proce‐

dure in the course of servicing.

♦ Only function and noise are checked using special colour‐

less lubricant.

♦ Cleaning and lubrication of the guide rails is a repair meas‐

ure.

♦ Rather than a brush, it is better to apply the lubricant with a

spray can and a long capillary tube.

Special tools and workshop equipment required ♦ Special lubricant G 060 567 A2 (spray can with long capillary tube) ♦ Lint-free cloth

ht rig py Co t.

r fo ng

♦ Industrial vacuum cleaner

rrectness of i t to the co nform spec at i h re o n wit in t his

ly noticeable.

do c um en

es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

♦ The new special lubricant G 060 567 is colourless and bare‐

ility ab y li an pt ce

Note

un le

4.45

nA wage olks V by ed ris o th au ss

c o p yri gh t . C op yi

♦ Commercially-available brush: approx. 15 mm wide, angled to approx. 40° in a workshop agen lksw Vo by

AG.

Prote cted by

Noise and function: checking ⇒ page 126

Guide rails: cleaning and lubricating ⇒ page 126

Guide rail: cleaning and lubricating from inside ⇒ page 127 Glass panel guide: cleaning and lubricating from inside ⇒ page 127 Guide rail: cleaning and lubricating from outside ⇒ page 128 Glass panel mechanism: cleaning and lubricating ⇒ page 128 Glass panel guide: cleaning and lubricating from outside ⇒ page 129 Wind deflector: cleaning ⇒ page 130 Seals: checking for damage and cleaning ⇒ page 130 Guide plate: locking ⇒ page 131

NOTICE Risk of damage to roof insert by unlocking guide plate block‐ ing element. – The guide plate must not be cleaned or lubricated. If the blocking element of the control plate -diagram- becomes disengaged during cleaning or lubricating operations, do not operate the panorama sliding/tilting glass roof.

4. Descriptions of work

125

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

Guide plate: locking ⇒ page 131

4.45.1

Noise and function: checking

– Check roof system for damage. – Check function of roof system, i.e. open and close glass panel and sliding headliner/roller blind completely. Other than the noises associated with normal operation there should be no unusual noises, such as chattering, squeaking, clicking, nor should there be any vibration.

Guide rails: cleaning and lubricating

AG. Volkswagen AG d agen oes ksw not l o V gu by ara d e nte is r o eo h ut ra a c s s

– Open sunroof roller blind completely. – Open glass panel completely. – Remove loose particles of dirt in the guide rail in advance using an industrial vacuum cleaner. – Remove residual grease and dirt from guide rail using iso‐ propanol and a lint-free cloth.

agen lksw Vo by

AG.

Prote cted by c o p yri gh t. C op yi

126 4. Descriptions of work

ht rig py Co t.

r fo ng

– Apply lubricant to the outer guide rail -arrow-.

rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um en

urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d p

ility ab y li an pt ce

un le

4.45.2

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

– Apply lubricant to the inner guide rail -arrow-. AG. Volkswagen A gen swa

G do es

not using olk – Remove any excess paste from guide rails Vlubricating gu by ara a lint-free cloth.rised nte

tho

eo ra c

Guide rail: cleaning and lubricating from inside

r fo ng

– Close glass panel just enough so that wind deflector is still completely deployed. – Remove residual grease and dirt from guide rail using a lint-free cloth.

ht rig py Co t.

Prote cted by c o py rig ht . C op yi

– Apply lubricant to guide rail from inside -arrows-.

rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um en

urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d p

ility ab y li an pt ce

4.45.3

un le

u – Repeat process on the other side of the vehicle. sa

agen lksw Vo by

– Remove any excess lubricating paste from guide rail using a lint-free cloth. AG.

– Repeat process on the other side of the vehicle.

4.45.4

Glass panel guide: cleaning and lubri‐ cating from inside

Close glass panel just enough so that wind deflector is still completely deployed.

4. Descriptions of work

127

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

un le

ility ab y li an pt ce

–

– Repeat process on the other side of the vehicle.

Guide rail: cleaning and lubricating from outside

r fo ng

4.45.5

– Apply lubricant to guide rail from outside -arrows-. – Remove any excess lubricating paste from guide rail using a lint-free cloth. – Repeat process on the other side of the vehicle.

4.45.6

Glass panel mechanism: cleaning and lubricating

128 4. Descriptions of work

AG.

– Remove residual grease and dirt from guide rail using a lint-free cloth.

agen lksw Vo by

Prote cted by c o py rig ht . C op yi

– Open glass panel completely.

rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um en

urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d p

– Remove any excess lubricating paste from guide rail using a lint-free cloth.

ht rig py Co t.

–

AG. Volkswagen AG d agen oes ksw not l o gu y Vguide Remove residual grease and dirt from glass panel b ara d e nte is using a lint-free cloth. r o eo h ut ra a c s Apply lubricant to glass panel guide from inside -arrows-. s

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

– Close glass panel just enough so that wind deflector is still completely deployed. – Remove residual grease and dirt from glass panel mecha‐ nism using a lint-free cloth.

n AG. Volkswagen AG do es n wage s k l ot g o yV ua b d ran ir se tee o h t or u ac a ss

rrectness of i t to the co nform spec a t i h re o n in wit thi s

– Open glass panel completely.

es, in part or in w l purpos hole ercia , is n m ot com

pe rm itte d

ility ab y li an pt ce

un le

– Apply lubricant to support cage of glass panel mechanism at friction surfaces from outside -arrows-.

– Remove any excess lubricant from support cage and tilt lev‐ er of glass panel mechanism using a lint-free cloth.

Glass panel guide: cleaning and lubri‐ cating from outside

AG.

Prote cted by

Glass panel completely open.

agen lksw Vo by

c o p yri gh t . C op yi

4.45.7

ht rig py Co t.

– Repeat process on the other side of the vehicle.

do c um en

r te o iva r rp fo g n

– Apply lubricant to support cage of glass panel mechanism at friction surface from inside or outside -arrow-.

4. Descriptions of work

129

rrectness of i t to the co nform spec at i h re o n wit in t his

es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

un le

ility ab y li an pt ce

AG. Volkswagen AG d agen oes ksw not l o V➤ Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 gu by ara d e nte Maintenance - Edition 11.2022 is r o eo h ut ra a c s s

r fo ng

– Perform complete sequence of roof system operations and check again for lubricant residue at all lubrication points.

4.45.8

Wind deflector: cleaning

Glass panel completely open.

– Clean net and frame of wind deflector -1- with a sponge and soap solution. – Remove loose particles of dirt from wind deflector slot -arrows- using an industrial vacuum cleaner. – Close glass panel completely.

4.45.9

Seals: checking for damage and clean‐ ing

130 4. Descriptions of work

AG.

– Repeat process on the other side of the vehicle.

agen lksw Vo by

Prote cted by c o p yri gh t. C op yi

– Remove any excess lubricating paste from guide rail using a lint-free cloth.

ht rig py Co t.

– Apply lubricant to glass panel guide from outside -arrow-.

do c um en

– Remove residual grease and dirt from glass panel guide using a lint-free cloth.

n AG. Volkswagen AG do es n wage s k l ot g o yV ua b d ran ir se tee o h t or u ac a ss

– Inspect seal on rear glass panel -2- for damage.

ht rig py Co t.

r te o iva r rp fo ng

– Clean seal on rear glass panel -2- and opposite sealing surface on roof.

rrectness o f i t to the co n f orm spec atio h re n wit

– Bring glass panel -1- into tilt position

in t his d o cu m en

es, in part or in w l purpos hole ercia , is n m ot com

pe rm itte d

ility ab y li an pt ce

un le

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

agen lksw Vo by

AG.

Prote cted by

c o p yri gh t . C op yi

– Open glass panel -1- completely.

– Check seal on roof -3- for damage. – Clean seal on roof -3- and sealing surfaces on glass panel -2-.

4.45.10

Guide plate: locking

Note

If the blocking element of the control guide becomes disengag‐ ed during cleaning or lubricating operations, do not operate the panorama slide sunroof. Risk of damage Engage control guide as follows:

4. Descriptions of work

131

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 AG. Volkswagen A

ility ab y li an pt ce

4.46

un le

–

G do es n ot g ua ran tee or ac

Road test: performing (driving behav‐ iour, noises, air conditioner etc.)

Which of the following can be checked depends on vehicle equipment and local conditions (urban/country). Check the following during a road test: ♦ Engine: output, misfiring, idling speed, acceleration ♦ Clutch: pulling away, pedal pressure, odours ♦ Gear selection: ease of operation, stick position ♦ Automatic gearbox: Selector lever position, shift lock/ignition key removal lock, shift behaviour, dash panel insert display ♦ Foot brake and handbrake: function, free travel and effec‐ tiveness, pulling to one side, juddering, squeal ♦ ABS function: pulsing must be felt at the brake pedal during ABS-regulated braking r fo ng

♦ Multi-function indicator (MFI): functions ♦ Air conditioning system: check function (At low temperatures the function of air conditioner must be checked in a work‐ shop). ♦ Vehicle: pulls to one side when travelling straight ahead (lev‐ el road). ♦ Imbalance: wheels, drive shafts, propshaft ♦ Noise/vibration: wheel bearing, exhaust system ♦ Engine: hot starting behaviour

4.47

Wheel securing bolts: tighten to speci‐ fied torque

Special tools and workshop equipment required ♦ Adapter set for wheel bolts -T10313-

♦ Torque wrench

132 4. Descriptions of work

AG.

♦ Radio/radio navigation system: function, reception, GALA, interference noise

agen lksw Vo by

Prote cted by c o py rig ht . C op yi

♦ Tilting roof: function

ht rig py Co t.

♦ Steering: function, steering free clearance, steering wheel centred when vehicle is travelling straight ahead

rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um en

urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d p

–

n wage olks V Carefully push control guide lever -greenbydownwards. ed ris o Using a screwdriver, carefully pushuthblocking element -bluea over lever -green- from side. ss

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 Note ♦ To loosen/tighten the anti-theft wheel bolts a special adapt‐

er, located in vehicle tool kit, is required.

♦ To loosen the anti-theft wheel bolts (lockable wheel bolts) do

not use an impact screwdriver.

♦ If the adapter to loosen or tighten the anti-theft wheel bolts

urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d p

AG. Volkswagen AG d agen oes ksw not l o V gu by ara d e nte is r o eo h ut ra a c s s

ility ab y li an pt ce

un le

is not available in the vehicle, use the corresponding adapter set for tamper-proof wheel bolts.

– Fit adapter -2- onto anti-theft wheel bolt -1- as far as stop. – Tighten wheel bolts diagonally to specified torque. Specified torque Wheel bolts

4.48

rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um en

– Fit wheel brace onto adapter -2- as far as stop.

Nm 140

Reducing agent (AdBlue®/DEF): re‐ plenishing Note

♦ The following description applies to diesel vehicles with SCR r fo ng

ht rig py Co t.

process (selective catalytic reduction). Prote cted by c o p yri gh t. C op yi

♦ Additional information on the SCR process and reducing

agent (AdBlue ®) can be found in the glossary ⇒ page 183 agen lksw Vo by

♦ To prevent the descriptions from becoming unclear, the

“NOx reducing agent AUS 32” (AdBlue®) is merely called reducing agent (AdBlue®/DEF) in the following texts. AG.

General notes ⇒ page 134 Health/endangerment and cleaning ⇒ page 135 Disposal instructions ⇒ page 136 Filling reducing agent tank ⇒ page 136 Special tools and workshop equipment required

4. Descriptions of work

133

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 ♦ Filling device for AdBlue -VAS 6960-

4.48.1

General information

Properties ♦ The reducing agent (AdBlue®/DEF) is not a diesel additive and must not be poured into the diesel fuel tank. ♦ The reducing agent (AdBlue®/DEF) is used for exhaust treatment to reduce nitrogen oxides in the exhaust gas of diesel powered vehicles. ♦ The reducing agent (AdBlue®/DEF) reduces these nitrogen oxides to water and nitrogen. ♦ The reducing agent (AdBlue®/DEF) is a high-purity 32.5% urea solution and is used in systems with exhaust treatment (SCR catalytic converters) ⇒ page 183 for diesel engines. ♦

mobilindustrie e. V. (VDA) in the USA, Germany, the Euro‐ pean Union and other countries.

Application

♦ Do not mix additives with reducing agent (AdBlue®/DEF). ♦ Do not dilute the reducing agent (AdBlue®/DEF) with water. ♦ Do not use fluid which has already been used.

♦ Use only reducing agent (AdBlue®/DEF) in the intended, original containers. Also note the expiry date information. ♦ Additionally note the reducing agent manufacturer's usage and storage instructions. Technical data

♦ “NOx reducing agent AUS 32” is the designation according to ISO 22241-1. r fo ng

Prote cted by

134 4. Descriptions of work

AG.

♦ The part numbers for available sizes of containers is availa‐ ble in ⇒ ETKA.

agen lksw Vo by

c o p yri gh t. C op yi

♦ A refill container approved by Volkswagen must be used for replenishing the reducing agent (AdBlue®/DEF).

ht rig py Co t.

♦ The reducing agent (AdBlue®/DEF) is contained in a sepa‐ rate tank in the vehicle. It is NOT therefore mixed with diesel fuel.

rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um en

urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d p

un le

ility ab y li an pt ce

♦

AG. Volkswagen AG d agen oes ksw not l o V gu y b ara d nte operating vehicles with SCR. ise r o eo h t u ra c AdBlue® is a registered trademark of the Verband derss aAuto‐

The reducing agent (AdBlue®/DEF) is legally required for

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 Insufficient reducing agent If the level of reducing agent is low, one of the following mes‐ sages appears on the dash panel insert: ♦ From a remaining distance of 2400 km, a gong sounds and “Top up AdBlue (DEF)!” is displayed“ Remaining distance 2400 km”. ♦ From a remaining distance of 1000 km, a warning buzzer sounds and “Top up AdBlue (DEF)!” is displayed“ No engine starting in 1000 km” ♦ From a remaining distance of 0 km, a warning buzzer sounds three times and “Top up AdBlue (DEF)!” is dis‐ played“ Engine start no longer possible is shown.” System malfunction or incorrect filling

NOTICE Use of reducing agent (AdBlue®) or other fluids that do not comply with standards. AG. Volkswagen AG d Risk of damage to the vehicle. agen oes ksw no l o – For BlueTDI vehicles, only y Vuse reducing agent (AdBlue®/ t gua b d ran e tee ris DEF). ho

rrectness of i t to the co nform spec at i h re o n wit in t his

♦ From a remaining distance of 1050 km, “Check AdBlue (DEF)!” is displayed“ Remaining distance 1050 km”. ♦ From a remaining distance of 1000 km, a warning buzzer sounds and “Check AdBlue (DEF)!” is displayed“ No engine start possible in 1000 km”. ♦ From a remaining distance of 0 km, a warning buzzer sounds three times and “Check AdBlue (DEF)!” is dis‐ played“ Engine start no longer possible”. Note

As soon as the message “Check AdBlue! No engine start pos‐ sible! ” is displayed and the engine is switched off; the engine cannot be started again.

Health risk and cleaning agen lksw Vo by

Prote cted by c o py rig ht . C op yi

CAUTION

ht rig py Co t.

4.48.2

r fo ng

– Fault recovery ⇒ Guided fault finding

do c um en

es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

un le

In case of system malfunction or incorrect filling, one of the following messages appears on the dash panel insert:

or ac ility ab y li an pt ce

t au ss

AdBlue®/DEF is an irritant and corrosive fluid! Risk of irritation and injury to skin, eyes and respiratory or‐ gans. – In the event of AdBlue®/DEF coming into contact with the eyes, wash off immediately with water for at least 15 mi‐ nutes, and seek medical assistance. – In the event of skin contact with AdBlue®/DEF, wash off immediately with water. – In the event of AdBlue®/DEF ingestion, rinse out the mouth immediately with water for at least 15 minutes. Do not induce vomiting unless instructed to do so by a doctor. Seek medical assistance without delay.

4. Descriptions of work

135

AG.

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

NOTICE AdBlue®/DEF is an irritant and corrosive fluid. When left ex‐ posed to air, reducing agent residue will crystallise after some time. Risk of damage to trims and body parts. – Wash off reducing agent (AdBlue®/DEF) with clear water and a lint-free cotton cloth. – If the reducing agent (AdBlue®/DEF) has already crystal‐ lised, use warm water and a sponge.

4.48.3

AG. Volkswagen AG d agen oes ksw not l o gu yV b ara d e nte is r o eo h ut ra a c s s

Disposal instructions

un le pe rm itte d

ility ab y li an pt ce

Note

♦ Information reference storage and disposal ⇒ Infonet, Oper‐ es, in part or in w l purpos hole ercia , is n m ot com

♦ The refill container must be disposed of in accordance with

environmental regulations.

4.48.4

Reducing agent tank: filling

Procedure Note

♦ Ensure that the vehicle is on a hard, level standing and that r te o iva r rp fo ng

♦ Refer to the ⇒ Operating manual for the filling device for

AdBlue -VAS 6960-.

♦ Use only demineralised water for cleaning any components

in t his d o cu m en

the ignition is switched off.

ht rig py Co t.

Prote cted by c o py rig ht . C op yi

of the AdBlue®/DEF system. Do not use tap water for this. agen lksw Vo by

AG.

– Switch off ignition.

The filler opening for the reduction agent tank (AdBlue®/DEF) is located under the tank flap. – Open tank flap. – Open the tank cap -arrowof the reducing agent tank (AdBl‐ ue®/DEF) under the fuel tank flap.

136 4. Descriptions of work

rrectness o f i t to the co n f orm spec atio h re n wit

ation, Strategy and deadlines, Environment, Handbook Serv‐ ice Environmental Protection! Ask your importer about coun‐ try-specific information on storage and disposal.

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 – Clean reducing agent tank filler neck with a water-soaked, lint-free cotton cloth. – Insert filler nozzle of filling device for AdBlue -VAS 6960- into filler neck of tank for reducing agent, and start filling the tank for reducing agent. Note

The filler nozzle of the filling device for AdBlue -VAS 6960stops automatically when the required reducing agent level has been attained. – Remove filler nozzle. – Screw on tank cap -arrowof the reducing agent tank (AdBl‐ ue®/DEF) until the cap locks.

– Close tank flap. AG. Volkswagen AG d agen oes ksw not l o gu yV b ara d e nte is r o eo After filling the reducing agent tank, switch on uthe th ignition and ra a leave it switched on for at least 30 seconds sso c s that the system

Note

pe rm itte d

un le

ility ab y li an pt ce

can detect the replenishment.

4.49

rrectness of i t to the co nform spec a t i h re o n in wit thi s

Procedure

es, in part or in w l purpos hole ercia , is n m ot com

Reducing agent (AdBlue®/DEF): changing

– ⇒ Rep. gr. 26; SCR system (selective catalytic reduction)

4.50

Tyre Pressure Loss Indicator: calibrat‐ ing Note

♦ The calibration of the Tyre Pressure Loss Indicator must on‐ ♦ If no pressure loss and tyre damage are found after a tyre

agen lksw Vo by

AG.

Prote cted by c o py rig ht . C op yi

Tyre Pressure Loss Indicator compares the speed and thus the rolling circumference and vibrations of the individual wheels via the ABS sensors. If the tyre pressure changes on one or

ht rig py Co t.

pressure warning, the incorrect warning can be rectified by calibrating.

do c um en

r te o iva r rp fo g n

ly be performed “after” the tyre pressure has been corrected to the prescribed values.

4. Descriptions of work

137

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 several wheels, the Tyre Pressure Loss Indicator will indicate this in the dash panel insert and the Infotainment system. The rolling circumference of tyre changes if: ♦ The tyre pressure is too low. ♦ The tyre has structural damage. ♦ The vehicle is loaded more heavily on one side. ♦ The wheels on one axle are loaded more heavily (e.g. when towing a trailer or when driving in mountains). ♦ Snow chains are fitted. ♦ The temporary spare wheel is fitted. ♦ One wheel per axle has been changed. The Tyre Pressure Loss Indicator warning lamp has a yellow warning lamp in the dash panel insert.

♦ A “PERMANENT LIGHTING-UP” in conjunction with a warn‐ ing tone, means “WARNING”, pressure loss has been detec‐ . Volkswagen AG ted, check tyre pressure and carry out calibration. gen AG d Calibration – Switch on ignition.

wa olks yV b ed ris ho t au ss

oes not gu ara nte eo ra c

un le

ility ab y li an pt ce

– Switch on infotainment system. pe rm itte d

– Press Home function button.

rrectness of i t to the co nform spec a t i h re o n in wit thi s

es, in part or in w l purpos hole ercia , is n m ot com

– Press Vehicle function button. – Tap Setup function button. – Press Tyres function button. – Press Set function button. – Press Confirm function button.

4.51

Tyre repair set: checking

Note

♦ Depending on the equipment level, the vehicles are equip‐ ♦ It also contains a filling bottle with tyre sealant.

agen lksw Vo by

AG.

Prote cted by

c o p yri gh t . C op yi

138 4. Descriptions of work

ht rig py Co t.

The breakdown set is in the spare wheel well in the luggage compartment.

do c um en

r te o iva r rp fo g n

ped with a breakdown set.

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

The breakdown set includes a bottle of tyre sealant -2- and a compressor -1-. The tyre sealant in the bottle has a limited storage life. Therefore the expiry date is indicated on the bottle -2-. – Enter expiry date in maintenance table. – If the expiry date has been reached, replace tyre sealant. (The tyre sealant must not be more than 4 years old).

4.52

Window wash/wipe system and head‐ light washer system: checking function

Checking anti-freeze protection of fluid, topping up fluid ⇒ page 139 Window wash/wipe system: check spray jet settings and adjust if necessary ⇒ page 141 Headlight washer system: checking spray jet settings ⇒ page 142 Windscreen wiper blades: check park position ⇒ page 142 .

4.52.1

Anti-freeze: checking protection of flu‐gen AG. Volkswagen AG d a oes not id, topping up fluid if necessaryby Volksw gu a d ise

ran tee or ac

Special tools and workshop equipment requiredthor un le pe rm itte d

rrectness o f i t to the co n f orm spec atio h re n wit

Note

es, in part or in w l purpos hole ercia , is n m ot com

♦ Refractometer -T10007B-

au ss

ility ab y li an pt ce

♦ Refractometer -T10007A-

In countries and regions where no frost occurs due to the local climatic conditions, the anti-freeze protection does not need to be checked. Read precise value for the following tests at light/dark boun‐ dary. Using a pipette, place a drop of water on the glass to improve the readability of the light/dark boundary. The light-dark border can be clearly recognised on the “WATERLINE”. – Check concentration of anti-freeze additive using refractom‐ eter.

ht rig py Co t.

r te o iva r rp fo ng

in t his d o cu m en

The scale -4- of the refractometer is applicable for the antifreeze protection of the window wash/wipe system.

agen lksw Vo by

4. Descriptions of work

139

AG.

Prote cted by

c o p yri gh t. C op yi

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

Anti-freeze protection to

Genuine washer fluid ⇒ ETKA

Water

n AG. Volkswagen AG do 1 part es no t gu ara 1 part nte eo 1 part ra c

– Top up fluid in window wash/wipe system (only if customer requests to do so). Use genuine washer fluid ⇒ ETKA throughout all year to fill window wash/wipe system. Depending on season, a winter product with anti-freeze protec‐ tion or a summer product with increased cleaning capabilities should be used. Ready-to-use window cleaner (Ready Mix) does not need to be mixed with water. Note

♦ Genuine washer fluid ⇒ ETKA prevents the spray jets, wash‐

er fluid reservoirs and connecting hoses from freezing.

♦ In vehicles with fan jets, the reservoir must be filled with r fo ng

agen lksw Vo by

AG.

Prote cted by

c o p yri gh t. C op yi

♦ Genuine washer fluid ⇒ ETKA can also be used in the sum‐

mer. The powerful cleanser easily removes wax and oil resi‐ due from the glass.

♦ Anti-freeze protection must be guaranteed to approx. -25°C

(approx. -35°C in countries with an arctic climate) in the windscreen wash/wipe system.

140 4. Descriptions of work

ht rig py Co t.

Genuine washer fluid, as this fluid has a low viscosity at tem‐ peratures below freezing. Otherwise the complicated spray jet system can become blocked by the crystallised washer fluid, which affects the spray pattern of the spray jet. Genu‐ ine washer fluid ensures that the fan jets remain fully func‐ tional at low temperatures.

rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um en

urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d p

3 parts 2 part 1 part

ility ab y li an pt ce

un le

age -17/-18°C ksw Vol y b -22/-23 °C ed ris o h -37/-38 °C aut

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

4.52.2

Window wash/wipe system: checking spray jet settings and adjusting if nec‐ essary

Note

In case of uneven spray field due to impurities in the spray jet: remove spray jet, and rinse it through with water, opposite to di‐ rection of spray. Subsequent blowing through with compressed air against the spraying direction is permitted. Never use imple‐ ments to clean the spray jets. Windscreen spray jet settings

The spray jets are preset. However, small differences in height may be corrected. oes not gu ara nte eo ra c

w olks yV b ed ris ho t au ss

rrectness of i t to the co nform spec a t i h re o n in wit thi s

es, in part or in w l purpos hole ercia , is n m ot com

pe rm itte d

ility ab y li an pt ce

un le

– If both spray fields are not at same height, adjust spray . Volkswagen AG direction upwards or downwards asafollows: gen AG d

1 - Cowl panel in front of windscreen 2 - Adjuster, Torx size 8 3 - Fan jet 4 - Bonnet

♦ “Clockwise” lower.

ht rig py Co t.

♦ “Anti-clockwise” higher.

do c um en

r te o iva r rp fo g n

– Adjust spray jet -3- by turning adjuster -2- using a Torx screwdriver.

4. Descriptions of work

141

agen lksw Vo by

AG.

Prote cted by

c o p yri gh t . C op yi

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

4.52.3

Headlight washer system: checking spray jet settings

Note

Only control function of spray jets but do not adjust them.

AG. Volkswagen AG d agen oes ksw not l o V gu y b ara d nte ise r o eo h t u ra a c s s

– Switch on dipped headlight.

– Operate windscreen washing system. The headlights are washed if the windscreen wiper lever is held in “wipe position” for at least 1.5 seconds. The washer fluid jet must hit the headlight lens centrally. If spray pattern deviates from specifications, carry out repair measures.

Wiper blades: checking park position r fo ng

Procedure

⇒ Electrical system; Rep. gr. 92; Windscreen wiper system; Adjusting windscreen wiper arms Prote cted by

♦ The repair measure is carried out subject to a separate

charge.

142 4. Descriptions of work

AG.

♦ Adjusting the wiper blades is a repair measure.

agen lksw Vo by

c o p yri gh t. C op yi

Note

ht rig py Co t.

4.52.4

rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um en

urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d p

ility ab y li an pt ce

un le

Washer spray jet: checking settings

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

4.53

Headlight adjustment: checking LED headlights with cornering light Note

♦ Additional weights are no longer used. ♦ Instead, a different inclination setting on the headlight adjust‐

ment unit is used.

♦ If the maintenance tables are used, the settings are dis‐

played in the vehicle-specific maintenance list.

♦ In the US, Canadian and Mexican markets, SAE-compliant

headlights are used.

♦ The headlight adjustment is subject to a separate charge. Test and adjustment prerequisites ⇒ page 143 Check headlight adjustment (ECE). ⇒ page 144

Test and adjustment conditions un le

4.53.1

not gu ara nte eo ra c

Headlight lenses must not be damaged or dirty

•

Reflectors and lights OK

•

The initialisation of the headlight range control must have been completed. 1)

•

The vehicle must be rolled forward and backward several metres or front and rear springs must be bounced fully sev‐ eral times so that springs settle.

•

Vehicle and headlight adjuster must be on a level surface.

•

Vehicle and headlight adjustment unit must be aligned.

•

Inclination must be set.

•

Event memory must be cleared.

•

If the headlight adjustment unit has an adjustment mode, select it.

•

Dynamic cornering light must be deactivated ⇒ page 143 .

•

Refer to the ⇒ operating instructions for headlight adjust‐ ment units.

•

The current software for the headlight adjustment unit -VAS 621 001- is available on the equipment manufacturer’s homepage.

r fo ng

es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

•

rrectness of i t to the co nform spec at i h re o n wit in t his

Tyre pressure OK

do c um en

•

ility ab y li an pt ce

y db ise light: adjusting ⇒ page 148 LED headlights with cornering r tho au s s

ht rig py Co t.

AG. Volkswagen AG d agen oes

ksw Check headlight adjustment (SAE). Vol ⇒ page 146

agen lksw Vo by

AG.

Prote cted by c o p yri gh t. C op yi

1) During the initialisation, the step motors for the headlight

range control are reset to dipped beam position. The initialisa‐ tion of the headlight range control is performed during vehicle start or after an "on" signal is applied to terminal 15. Deactivate dynamic cornering light in Infotainment system

The cornering light is deactivated as this ensures that no head‐ light is in “city light” mode. In “city light” mode, the headlight setting cannot be checked.

4. Descriptions of work

143

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 – Switch on ignition. – Switch on infotainment system. – Press Infotainment CAR button. – Press Setup function button. – Press Light function button. – Press Dynamic cornering light function button and re‐ move tick. Dynamic cornering light is now deactivated. Note

After adjusting the headlights, the dynamic cornering light must be reactivated.

4.53.2

Headlight adjustment (ECE): adjusting

Special tools and workshop equipment required ♦ Headlight adjustment unit -VAS 621 001♦ Headlight adjustment unit -VAS 621 005♦ Vehicle diagnostic tester The inclination on the headlight adjustment unit is set according to the fuel level in the fuel tank. Inclination setting for ECE-compliant gas discharge headlights, LED headlights and DLA headlights Fill level of fuel gauge

Inclination

pe rm itte d

ility ab y li an pt ce

un le

0 to 1/2 1/2 to 1

AG. Volkswagen AG d agen oes ksw not l o V gu by ara d 1.0% e nte is r o eo h 1.0% ut ra a c s s

rrectness of i t to the co nform spec a t i h re o n in wit thi s

es, in part or in w l purpos hole ercia , is n m ot com

Test pattern with dynamic main beam Note

♦ For dynamic main beam test pattern, headlights need to be

reset to basic settings using vehicle diagnostic tester.

♦ The basic settings can only be reset using vehicle diagnostic

tester. After resetting, DLA main beam distribution is actu‐ ated automatically.

♦ Pay special attention to correct alignment of the adjustment

sighting device on the headlight adjuster. Only when this has been done can you adjust the headlights to ensure that they do not dazzle other road users. checked as an alternative. ⇒ page 145

♦ DLA: “Dynamic Light Assist”, dynamic high beam regulation.

agen lksw Vo by

AG.

Prote cted by c o p yri gh t. C op yi

144 4. Descriptions of work

ht rig py Co t.

Check the following:

do c um en

r te o iva r rp fo g n

♦ In vehicles with DLA the dipped headlight setting can be

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

– Whether the horizontal light-dark border touches the sepa‐ olkswabeam rating line -1- in the test area when the main gen AG is on. en AG. V ag lksw

does n

Note

The setup pattern applies only to the left headlight. The setup pattern for the right headlight is a mirror image. Test pattern with dipped headlights Testing may also be carried out with dipped headlights switched on. Nevertheless, said dynamic main beam test pattern is pre‐ ferred. For checking dipped headlight it is not necessary to use the vehicle diagnostic tester.

ht rig py Co t.

r fo ng

The headlight setting can also be carried out using the dipped headlight test pattern.

rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um en

urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d p

un le

ility ab y li an pt ce

o o – Whether the breaking point y V -2- between horizontal part oft gua db ran e the light-dark borderoron is the right and the rising part on the tee h line of the central point -3-. The bright t or left lies on the vertical u ac a s core of the lightsbeam must be to the left of the vertical line.

agen lksw Vo by

AG.

Prote cted by c o py rig ht . C op yi

– With the dipped beam switched on, the lowest part of the horizontal light-dark border must touch the dividing line -1- of the test area – The breaking point -2- between the horizontal part of the light-dark border on the left and the slope on the right should be on the vertical line passing through the centre mark. If no light-dark border with rising asymmetric portion can be seen in the left headlight (right-hand drive) or in the right head‐ light (left-hand drive), the “city light” function must be deactiva‐ ted. The city light feature is used to ensure that oncoming traffic is not dazzled up to a speed of 30 km/h in city traffic. 4. Descriptions of work

145

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

4.53.3

AG. Volkswagen Headlight adjustment (SAE): agenchecking AG does no lksw Vo by

t gu ara nte eo ra c

ed Special tools and workshop equipment ris required

tho

ility ab y li an pt ce

un le

u ♦ Headlight adjustment unit -VAS s a 621 001-

♦ Vehicle diagnostic tester

rrectness of i t to the co nform spec at i h re o n wit in t his

Note

♦ The VOL/VOR marking is visible on the outside the head‐

light.

♦ The lateral adjustment mechanism is sealed on SAE-compli‐

ant headlights.

The inclination on the headlight adjustment unit is set according to the fuel level in the fuel tank. Inclination setting for SAE-compliant VOL gas discharge head‐ lights, LED headlights and DLA headlights

r fo ng

0.7 % 0.7 %

Inclination setting for SAE-compliant VOR gas discharge head‐ lights, LED headlights and DLA headlights

agen lksw Vo by

Prote cted by c o py rig ht . C op yi

0 to 1/2 1/2 to 1

Inclination

AG.

Fill level of fuel gauge

Inclination

0 to 1/2 1/2 to 1

0.0 % 0.0 %

Test pattern with dynamic main beam Note ♦ For dynamic main beam test pattern, headlights need to be

reset to basic settings using vehicle diagnostic tester.

♦ The basic settings can only be reset using vehicle diagnostic

tester. After resetting, DLA main beam distribution is actu‐ ated automatically.

♦ Pay special attention to correct alignment of the adjustment

sighting device on the headlight adjuster. Only when this has been done can you adjust the headlights to ensure that they do not dazzle other road users.

♦ In vehicles with DLA the dipped headlight setting can be

checked as an alternative. ⇒ page 147

♦ DLA: “Dynamic Light Assist”, dynamic high beam regulation. Check the following:

146 4. Descriptions of work

ht rig py Co t.

Fill level of fuel gauge

do c um en

es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

♦ Headlight adjustment unit -VAS 621 005-

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

AG. Volkswagen AG d agen oes ksw not l o gu yV b ara d e nte is r o eo h ut ra a c s s

un le

pe rm itte d

ility ab y li an pt ce

– Whether the horizontal light-dark border touches the sepa‐ rating line -1- in the test area when the main beam is on.

es, in part or in w l purpos hole ercia , is n m ot com

Note

The setup pattern applies only to the left headlight. The setup pattern for the right headlight is a mirror image. Test pattern with dipped headlights

For checking dipped headlight it is not necessary to use the vehicle diagnostic tester.

do c um en

r te o iva r rp fo g n

Testing may also be carried out with dipped headlights switched on. Nevertheless, said dynamic main beam test pattern is pre‐ ferred.

rrectness of i t to the co nform spec a t i h re o n in wit thi s

– Whether the breaking point -2- between horizontal part of the light-dark border on the right and the rising part on the left lies on the vertical line of the central point -3-. The bright core of the light beam must be to the left of the vertical line.

The headlight setting can also be carried out using the dipped headlight test pattern. ht rig py Co t.

agen lksw Vo by

AG.

Prote cted by c o py rig ht . C op yi

147

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

4.53.4

LED headlights with cornering light: ad‐ justing AG. Volkswagen A

Note

n wage olks V by ed ris o th au ss

G do es n ot g ua ran tee or ac

un le

pe rm itte d

♦ A vehicle with LED headlights and cornering light can be

rrectness o f i t to the co n f orm spec atio h re n wit

– Carrying out basic setting of headlight range control ⇒ page 29

Prote cted by

Height adjustment

AG.

– Turn height adjustment screw -2- until setting is correct.

agen lksw Vo by

Lateral adjustment

c o p yri gh t . C op yi

– Turn lateral adjustment screw -1- until setting is correct. The lateral adjustment mechanism is sealed on SAE-compliant headlights. Subsequent check of left headlight Note ♦ The subsequent check of the headlight is performed using

the test pattern for the dipped beam headlight.

♦ It is not permitted to change the lateral setting of the head‐

light any more during the check. Readjusting the vertical setting is permissible.

– Check headlight setting. – Adjust height setting of headlight, if necessary. – After adjusting the headlights, the dynamic cornering light must be reactivated ⇒ page 143 . Note ♦ Adjustment of the right headlight is carried out in the same

sequence.

♦ The adjustment screws for the right headlight are a mirror

image.

148 4. Descriptions of work

ht rig py Co t.

r te o iva r rp fo ng

Adjusting left headlight

in t his d o cu m en

es, in part or in w l purpos hole ercia , is n m ot com

identified by PR number 8IU.

ility ab y li an pt ce

♦ The headlight adjustment is subject to a separate charge.

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

4.54

Headlight adjustment: checking LED headlights

AG. Volkswagen AG d agen oes ksw not l o V gu y b ara d nte ise r o eo h t Additional weights are no longer used. u ra a c s s

Note

♦

un le

pe rm itte d

ment unit is used.

♦ If the maintenance tables are used, the settings are dis‐

headlights are used.

♦ The headlight adjustment is subject to a separate charge. Test and adjustment conditions ⇒ page 149 Headlight adjustment (ECE): checking ⇒ page 149 Check headlight adjustment (SAE). ⇒ page 150 LED headlights: adjusting ⇒ page 152 .

4.54.1

Tyre pressure OK r te o iva r rp fo ng

•

Test and adjustment conditions

•

Headlight lenses must not be damaged or dirty

•

Reflectors and lights OK

•

The initialisation of the headlight range control must have been completed. 1)

•

The vehicle must be rolled forward and backward several metres or front and rear springs must be bounced fully sev‐ eral times so that springs settle.

•

Vehicle and headlight adjuster must be on a level surface.

•

Vehicle and headlight adjustment unit must be aligned.

•

Inclination must be set.

•

Event memory must be cleared.

•

If the headlight adjustment unit has an adjustment mode, select it.

•

Refer to the ⇒ operating instructions for headlight adjust‐ ment units.

•

The current software for the headlight adjustment unit -VAS 621 001- is available on the equipment manufacturer’s homepage.

in t his d o cu m en

es, in part or in w l purpos hole ercia , is n m ot com

♦ In the US, Canadian and Mexican markets, SAE-compliant

rrectness o f i t to the co n f orm spec atio h re n wit

played in the vehicle-specific maintenance list.

ility ab y li an pt ce

♦ Instead, a different inclination setting on the headlight adjust‐

ht rig py Co t.

agen lksw Vo by

AG.

Prote cted by

c o p yri gh t. C op yi

1) During the initialisation, the step motors for the headlight

range control are reset to dipped beam position. The initialisa‐ tion of the headlight range control is performed during vehicle start or after an "on" signal is applied to terminal 15.

4.54.2

Headlight adjustment (ECE): adjusting

Special tools and workshop equipment required ♦ Headlight adjustment unit -VAS 621 001♦ Headlight adjustment unit -VAS 621 005♦ Vehicle diagnostic tester 4. Descriptions of work

149

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 The inclination on the headlight adjustment unit is set according to the fuel level in the fuel tank. Inclination setting for ECE-compliant gas discharge headlights, LED headlights and DLA headlights Fill level of fuel gauge

Inclination

0 to 1/2 1/2 to 1

1.0% AG. Volkswagen AG d agen oes 1.0% n lksw

un le pe rm itte d

rrectness of i t to the co nform spec a t i h re o n in wit thi s

es, in part or in w l purpos hole ercia , is n m ot com

Check the following:

ility ab y li an pt ce

Test pattern with dipped headlights

ot g ua ran tee or ac

o yV db ir se ho ut a ss

Prote cted by

and uncover left (from driver perspective) half of the head‐ light a few times. Then check dipped beam again.

♦ After correct adjustment of dipped beams, the centre point of

the main beam must lie on the centre mark -3-.

4.54.3

Headlight adjustment (SAE): checking

Special tools and workshop equipment required ♦ Headlight adjustment unit -VAS 621 001♦ Headlight adjustment unit -VAS 621 005♦ Vehicle diagnostic tester Note ♦ The VOL/VOR marking is visible on the outside the head‐

light.

♦ The lateral adjustment mechanism is sealed on SAE-compli‐

ant headlights.

150 4. Descriptions of work

AG.

♦ To simplify the determination of the breaking point -2-, cover

agen lksw Vo by

c o p yri gh t . C op yi

Note

ht rig py Co t.

– The breaking point -2- between the horizontal part of the light-dark border on the left and the slope on the right should be on the vertical line passing through the centre mark.

do c um en

r te o iva r rp fo g n

– With the dipped beam switched on, the lowest part of the horizontal light-dark border must be aligned with the dividing line -1- of the test area.

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 The inclination on the headlight adjustment unit is set according to the fuel level in the fuel tank. Inclination setting for SAE-compliant VOL gas discharge head‐ lights, LED headlights and DLA headlights Fill level of fuel gauge

Inclination

0 to 1/2 1/2 to 1

0.7 % 0.7 %

rrectness o f i t to the co n f orm spec atio h re n wit

es, in part or in w l purpos hole ercia , is n m ot com

pe rm itte d

un le

ility ab y li an pt ce

n AG. Volkswagen AG do es n wage s k l ot g o yV ua b ran ed s i tee VOL: Visual Optical Aim Left -1- thor or u ac a ss

– Check whether the left horizontal light-dark border touches the separating line -1- in the test area of the headlight ad‐ justment unit. r te o iva r rp fo ng

0.0 % 0.0 %

agen lksw Vo by

AG.

Prote cted by

c o p yri gh t . C op yi

0 to 1/2 1/2 to 1

Inclination ht rig py Co t.

Fill level of fuel gauge

in t his d o cu m en

Inclination setting for SAE-compliant VOR gas discharge head‐ lights, LED headlights and DLA headlights

VOR: Visual Optical Aim Right -2-

– Check whether the right horizontal light-dark border touches the separating line -2- in the test area of the headlight ad‐ justment unit.

4. Descriptions of work

151

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

4.54.4

LED headlights: adjusting

Note

un le

ility ab y li an pt ce

number 8IT.

es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

♦

– Carrying out basic setting of headlight range control ⇒ page 29

r fo ng

Height adjustment

– Turn height adjustment screw -2- until setting is correct.

Sliding sunroof drains at rear: checking for blockage, cleaning if necessary

Tilt rear sliding sunroof.

– Check water drain at rear left -arrows- for contamination and clean if necessary. – Pour about 0.5 litre of tap water into the water drain from a measuring beaker using a commercially available funnel. Proceed with caution to make sure no water enters the vehi‐ cle interior. – Check under vehicle if water emerges in area of rear wheel housing.

152 4. Descriptions of work

Prote cted by

4.55

AG.

– Turn lateral adjustment screw -1- until setting is correct. The lateral adjustment mechanism is sealed on SAE-compliant headlights.

agen lksw Vo by

c o p yri gh t . C op yi

Lateral adjustment

do c um en

rrectness of i t to the co nform spec at i h re o n wit in t his

Adjusting left headlight

ht rig py Co t.

♦

n AG. Volkswagen AG do es n wage s k l ot g o yV ua b d ran The headlight adjustment is subject to a separate charge. ir se tee o h t or u ac a Vehicles with LED headlights can be identified via the PR ss

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 . Volkswag

G G do en Aother – Repeat procedure side eofn Avehicle. agon es ksw

not g

Vol

au ss

ra c

ility ab y li an pt ce

Note

es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

un le

ua b – If no water ed emerges at relevant positions, cleanransunroof tee ris o drains. th o

4.56

Service interval display: Reset

rrectness of i t to the co nform spec at i h re o n wit in t his

Cleaning of the sliding sunroof drains is a repair measure which is subject to a separate charge when performed.

Resetting service interval display using vehicle diagnostic tester ⇒ page 153 Resetting service interval display without vehicle diagnostic tester ⇒ page 153 Additional information for service interval display ⇒ page 7 A reset of the service interval display during ♦ Delivery inspection ♦ Each oil change (flexible/fixed) r fo ng

ht rig py Co t.

c o p yri gh t . C op yi

Note

do c um en

must be carried out.

agen lksw Vo by

It is also possible to reset the service interval display (SID) manually. However, bear in mind that, on vehicles coded to flexible interval, the SID needs to be coded to fixed intervals. This also modifies the adaptation channel for oil quality. AG.

Prote cted by

4.56.1

Service interval display: resetting using vehicle diagnostic tester

– Reset service interval display ⇒ page 29 . – Select the respective service which is to be reset.

4.56.2

Service interval display: resetting with‐ out vehicle diagnostic tester

Resetting oil change service Function button on dash panel insert:

– With ignition switched off, press and hold button -1-. – Switch on ignition. 4. Descriptions of work

153

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 Wait until “Reset oil change service?” appears on the display. – Release button -1-. The service interval display is now in the resetting mode. – Briefly press button -1- once. After a short time the display switches back to the original dis‐ play. Resetting inspection

AG. Volkswagen AG d agen oes ksw not l o V gu y b ara d nte ise r o eo h t u ra a c s s

es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

ility ab y li an pt ce

un le

Function button on dash panel insert:

– With ignition switched off, press and hold button -1-.

rrectness of i t to the co nform spec at i h re o n wit in t his

– Switch on ignition.

Wait until “Reset inspection?” appears on the display. on the display. – Release button -1-.

The service interval display is now in the resetting mode. – Briefly press button -1- once.

After a short time the display switches back to the original dis‐ play.

Service interval display: recoding Note

r fo ng

Prote cted by

– – – – – – – – –

Connect vehicle diagnostic tester ⇒ page 29 . Switch on ignition. Carry out identification of vehicle. Enter task data, or select “Without task”. Select “Control units”. Select “Dash panel insert”. Select “Guided Functions”. Select “Change flexible/fixed intervals”. Carry out adaptation according to the information of “Guided functions”.

154 4. Descriptions of work

AG.

ODIS Service

agen lksw Vo by

c o p yri gh t. C op yi

Recoding from flexible to fixed intervals

do c um en

If the display is not as shown in the procedure: ⇒ Operating instructions for vehicle diagnostic tester

ht rig py Co t.

4.57

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

Changing values for maximum distance to be driven (km) until next oil change service (fixed) during delivery inspection ODIS Service

r te o iva r rp fo ng

agen lksw Vo by

AG.

Prote cted by c o py rig ht . C op yi

– Check that boots -arrow- are not damaged and are seated correctly.

in t his d o cu m en

– With vehicle raised (wheels hanging free), check clearance by moving track rods and wheels. Clearance (specified): no clearance:

ht rig py Co t.

Procedure

Track rods: checking clearance, at‐ tachment and boots

rrectness o f i t to the co n f orm spec atio h re n wit

4.58

es, in part or in w l purpos hole ercia , is n m ot com

pe rm itte d

un le

ility ab y li an pt ce

– Connect vehicle diagnostic tester ⇒ page 29 . – Switch on ignition. – Carry out identification of vehicle. – Enter task data, or select “Without task”. – Select “Control units”. – Select “Dash panel insert”. – Select “Guided Functions”. – Select “Oil change service (fixed)”. – Follow instructions in “Guided functions” mode. – Reset “-1- Oil change service (fixed)”. – Follow instructions in “Guided functions” mode. The current values for maximum distance to be driven (km) until next oil change service are shown in the AG. Volkswagen AG d display of the vehicle diagnostic tester. agen oes ksw not l o gu yV b – Select “No”. ara d e nte is r o eo hbe driven until next oil change service, according – Select value for maximum distance to to specifications ut ra a c valid in your country. s s – Carry out adaptation according to the information of “Guided functions”.

4. Descriptions of work

155

AG. Volkswagen AG d agen oes ksw not l o V gu y b ara d nte ise r o eo h t u ra a c s s

rrectness o f i t to the co n f orm spec atio h re n wit

– Make sure that boots -1- of steering rack are not damaged and are seated correctly. – Perform visual inspection for leaks and damage in area of steering rack including track rods.

4.59

Interior filter: cleaning housing and re‐ newing filter element

r te o iva r rp fo ng

Procedure

Note

♦ Use a dust and pollen filter with at least an activated char‐ c o p yri gh t. C op yi

♦ Pollen, soot, fine dust, unpleasant odours, ozone, nitrogen

oxide and allergies can be filtered out effectively in this way.

agen lksw Vo by

AG.

Prote cted by

⇒ Heating, air conditioning; Rep. gr. 87; Front heater and air conditioning unit; Removing and installing dust and pollen filter.

4.60

Selective wheel torque control: chang‐ ing oil in left and right clutch chambers, and resetting oil learnt values using ve‐ hicle diagnostic tester

Procedure ⇒ Propshaft and rear final drive, selective wheel torque control; Rep. gr. 39; Gear oil; Draining and filling oil in clutch chamber

4.61

Selective wheel torque control: assess‐ ing oil degradation on left and right sides using vehicle diagnostic tester

Special tools and workshop equipment required ♦ Vehicle diagnostic tester Depending on the customer’s driving style, premature oil degra‐ dation may occur in the selective wheel torque control. For this reason, a load value for the oil must be read out. To do this, select the addresses “selective wheel torque control, rear left axle” and “selective wheel torque control, rear right axle” in the vehicle diagnostic tester. The test program shows the maximum value as well as the current load value.

156 4. Descriptions of work

ht rig py Co t.

coal layer, ideally an additional allergy filter layer.

in t his d o cu m en

es, in part or in w l purpos hole ercia , is n m ot com

pe rm itte d

ility ab y li an pt ce

un le

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 Depending on the mileage, the time left until the next service as well as the customer's driving profile, a decision must be made regarding a potential oil change.

4.62

Transport mode: switching off Note

♦ The transport mode is responsible for assuring the starting

capability of vehicle.

♦ Battery discharging is reduced by the transportation mode,

because electrical consumers are switched off.

♦ All vehicle functions which are not necessarily used during

vehicle transportation and require no-load voltage or battery capacity are switched off with the activated transportation mode, with regard to the service life of battery.

♦ These are especially all functions in the vehicle which can

reduce the battery capacity when being misused.

♦ Examples are radios, electronically operated flaps and at‐

tachments and anti-theft alarm systems which can produce faults during transportation.

– Switch transportation mode off/on ⇒ page 29 .

4.63

Transportation devices: removing blocking pieces Note

♦ The blocking pieces must be removed without reservation

before delivering the vehicle. A notice reading “Warning!” and attached to the interior rear view mirror highlights this point with absolute clarity.

rrectness of i t to the co nform spec at i h re o n wit in t his

es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

possible damage to the vehicle when being driven onto a vehicle transporter or railway wagon.

ility ab y li an pt ce

♦

un le

♦

AG. Volkswagen AG d agen oes ksw not l o V ua by blocking pieces are fitted to the gsuspen‐ On some models d ran e tee ris o sion strut piston rod. h t or u a a ss The blocking pieces prevent the springs compressing and c

ht rig py Co t.

agen lksw Vo by

Prote cted by c o p yri gh t. C op yi

Removing blocking pieces on piston rod

do c um en

r fo ng

– Vehicles with blocking pieces fitted to the suspension struts have a label hanging from the mirror -arrow-.

AG.

– Relieve weight on coil springs by raising vehicle with a hoist.

4. Descriptions of work

157

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 – Slide suspension strut protective sleeve -arrow- upwards.

Note ♦ On the front axle, up to 3 blocking pieces are installed on

each side.

♦ Usage of any auxiliary means for removal (such as lubricant

spray, silicone or similar) is not permitted.

AG. Volkswagen AG d agen oes ksw not l o V gu by ara d e nte is r o eo h ut ra a c s s

– Slightly press in bellows to sense the remaining blocking pieces. Slide them downwards on piston rod towards shock absorber cap using the folds of the bellows. – Push remaining blocking pieces off piston rod.

agen lksw Vo by

AG.

Prote cted by c o p yri gh t. C op yi

– To rectify dents, slide bellows upwards, reach inside the bellows with your hand and press out the dents.

158 4. Descriptions of work

ht rig py Co t.

r fo ng

– Check bellows -arrows- all-round for dents and rectify any dents.

rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um en

urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d p

ility ab y li an pt ce

un le

– Push visible blocking piece -arrow- off piston rod.

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 – Check that bellows are properly engaged in axial bearing: ♦ Correct position: bellows can be turned around rotational axis while seated in axial bearing. ♦ Otherwise pull bellows all-round out of axial bearing by one notch. ♦ After that, the bellows should be able to be turned around rotational axis.

4.64

Clock and date: set

Setting time and date in Infotainment system – Switch on ignition. – Switch on infotainment system. – Press Home function button. un le

pe rm itte d

– Tap Setup function button.

ility ab y li an pt ce

– Press Vehicle function button.

AG. Volkswagen AG d agen oes ksw not l o gu yV b ara d e nte is r o eo h ut ra a c s s

rrectness of i t to the co nform spec a t i h re o n in wit thi s

es, in part or in w l purpos hole ercia , is n m ot com

– Press Time and date function button. – Select function button Time and set current time. – Select function button Date set current date.

Underbody: inspecting for damage to underbody sealant, underbody panels, routing of lines, plugs NOTICE

r te o iva r rp fo g n

AG.

Warning stickers Arteon eHybrid: checking

agen lksw Vo by

Prote cted by c o py rig ht . C op yi

4.66

do c um en

During inspection, also check floor pan, wheel housings and sills. Risk of corrosion and rust penetration. – Ensure that all lines are secured in their mountings, all plugs are available and there is no visible damage to un‐ derbody. – Faults found must always be rectified (repair measure).

ht rig py Co t.

4.65

All high-voltage components are equipped with warning stick‐ ers. When performing maintenance work, ensure that warning stick‐ ers are not soiled or damaged and are present on all high-volt‐ age components. Note ♦ During oil change service or inspection, only warning stick‐

ers that are attached in visible areas are checked.

♦ Missing warning stickers on high-voltage components must

be renewed.

Warning sticker: ⇒ 4-cyl. direct injection (1.4 l engine, 4V, EA 211, turbocharger, hybrid); Rep. gr. 93; Warning sticker; Check‐ ing warning sticker

4. Descriptions of work

159

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

4.67

Toothed belt (petrol engines): renewing

Camshaft drive toothed belt: renewing, petrol engines – ⇒ Rep. gr. 15; Toothed belt drive; Removing and installing toothed belt Coolant pump toothed belt: renewing, petrol engines – ⇒ Rep. gr. 19; Coolant pump/thermostat assembly

4.68

Camshaft drive toothed belt (diesel en‐ gines): renewing

TDI common rail engines – ⇒ Rep. gr. 15; Toothed belt drive; Removing and installing toothed belt

4.69

Spark plugs: renew

Renewing spark plugs, 1.4 l TSI engines ⇒ page 160 Spark plugs: renewing, 1.5 l TSI engines ⇒ page 164 Spark plugs: renewing, 2.0 l TSI engines ⇒ page 167 Spark plugs: renewing, 2.0 l TSI engines (engine codes DNFE, DNFF, DNFG, DNNA) ⇒ page 169 Special tools and workshop equipment required

pe rm itte d es, in part or in w l purpos hole ercia , is n m ot com r te o iva r rp fo ng

rrectness o f i t to the co n f orm spec atio h re n wit

Spark plugs: renewing, 1.4 l TSI en‐ gines

Prote cted by

160 4. Descriptions of work

AG.

– Loosen hose clips -1- and -3- and remove air pipe -2-.

agen lksw Vo by

Removing

c o p yri gh t. C op yi

4.69.1

in t his d o cu m en

♦ Torque wrench

ht rig py Co t.

♦ Spark plug socket -3122 B-

AG. Volkswagen AG d agen oes ksw not l o V gu y b ara d nte ise r o eo h t u ra a c s s

ility ab y li an pt ce

un le

♦ Puller -T10530-

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

– Separate connectors -1-.

AG. Volkswagen AG d agen oes ksw not l o V gu y b ara d nte ise r o eo h t u ra a c s s

rrectness of i t to the co nform spec at i h re o n wit in t his

es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

ility ab y li an pt ce

un le

– Unscrew bolts -2-.

ht rig py Co t.

agen lksw Vo by

c o p yri gh t. C op yi

– Tighten knurled nut -2- in -direction of arrow-.

do c um en

r fo ng

– Push puller -T10530- as far as stop into hole in ignition coil -1-.

Prote cted by

– Pull ignition coil on puller -T10530- in direction of -arrow- out of cylinder head cover.

4. Descriptions of work

161

AG.

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

Repeat step for all ignition coils with output stage. Note ♦ Observe installation position of ignition coils with output

stage!

n AG. Volkswagen AG

do age ♦ Ensure that the cables are onot lkswkinked or damaged. es no

ility ab y li an pt ce

rrectness of i t to the co nform spec at i h re o n wit in t his

Note

♦ When installing new spark plugs, regrease ignition coils with

output stage using silicone paste ⇒ ETKA.

♦ The applicable silicone paste is stated in the ETKA along

with the corresponding ignition coil and/or spark plug.

agen lksw Vo by

AG.

Prote cted by

c o p yri gh t . C op yi

162 4. Descriptions of work

ht rig py Co t.

r fo ng

– Screw in new spark plugs and tighten them to specified tor‐ que using spark plug socket -3122 B- ⇒ page 164 .

do c um en

es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

Installing

un le

–

t gu yV ara db nte ir se eo Unscrew spark plugs ho using spark plug socket -3122 B-. t u ra a c ss

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

AG. Volkswagen AG d agen oes ksw not l o V gu y b ara d nte ise r o eo h t u ra a c s s

rrectness of i t to the co nform spec a t i h re o n in wit thi s

es, in part or in w l purpos hole ercia , is n m ot com

pe rm itte d

ility ab y li an pt ce

un le

– Tighten bolt -2- of ignition coil with output stage to specified torque ⇒ page 164 .

– Connect connector -1-. – Install air pipe -2-.

do c um en

ht rig py Co t.

r te o iva r rp fo g n

– Fit hose clips -1- and -3-.

4. Descriptions of work

163

agen lksw Vo by

AG.

Prote cted by

c o p yri gh t. C op yi

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

Specified torque

n AG. Volkswagen AG do es n wage s k l ot g o yV ua b d ran ir se tee o h t or u ac a ss

un le

urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d p

Renewing spark plugs, 1.5 l TSI en‐ gines

Removing

– Remove engine cover panel ⇒ page 107 . – Remove air pipe ⇒ 4-cylinder direct injection (1.5 l engine, 4V, EA 211 EVO, turbocharger); Rep. gr. 21; Charge air system; Removing and installing air pipe – Remove hose on crankcase breather ⇒ 4-cylinder direct in‐ jection (1.5 l engine, 4V, EA 211 EVO, turbocharger); Rep. gr. 17; Crankcase breather. – Separate connectors -2-.

agen lksw Vo by

AG.

Prote cted by

c o p yri gh t . C op yi

– Push puller -T10530- as far as stop into hole in ignition coil -1-.

164 4. Descriptions of work

ht rig py Co t.

r fo ng

– Unscrew bolts -1-.

rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um en

4.69.2

22 8

ility ab y li an pt ce

Spark plugs in cylinder head Bolt for ignition coil with output stage

AG. Volkswagen AG d agen oes ksw not l o gu yV b ara d e nte is r o eo h ut ra a c s s

rrectness of i t to the co nform spec at i h re o n wit in t his

es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

ility ab y li an pt ce

un le

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

– Tighten knurled nut -2- in -direction of arrow-.

do c um en

ht rig py Co t.

r fo ng

– Pull ignition coil on puller -T10530- in direction of -arrow- out of cylinder head cover.

agen lksw Vo by

AG.

Prote cted by c o py rig ht . C op yi

Repeat step for all ignition coils with output stage. Note ♦ Observe installation position of ignition coils with output

stages!

♦ Ensure that the cables are not kinked or damaged. – Unscrew spark plugs using spark plug socket -3122 B-. Installing Note ♦ When installing new spark plugs, regrease ignition coils with

output stage using silicone paste ⇒ ETKA.

♦ The applicable silicone paste is stated in the ETKA along

with the corresponding ignition coil and/or spark plug.

4. Descriptions of work

165

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

n AG. Volkswagen AG do es n wage s k l ot g o yV ua b d ran ir se tee o h t or u ac a ss

– Align and insert all ignition coils with output stage one after another loosely into spark plug hole. – Press ignition coils with output stage onto spark plugs evenly by hand (do not use any tools).

ht rig py Co t.

r te o iva r rp fo ng

– Tighten bolt -1- of ignition coil with output stage to specified torque ⇒ page 166 .

rrectness o f i t to the co n f orm spec atio h re n wit

– Apply a thin bead of silicone paste on the circumference of the sealing hose of the ignition coil with output stage -arrow-.

in t his d o cu m en

es, in part or in w l purpos hole ercia , is n m ot com

pe rm itte d

ility ab y li an pt ce

un le

– Screw in new spark plugs and tighten them to specified tor‐ que using spark plug socket -3122 B- ⇒ page 166 .

agen lksw Vo by

AG.

Prote cted by

c o p yri gh t . C op yi

– Connect connector -2-. Repeat step for all ignition coils with output stage. – Further assembly is performed in the reverse order of re‐ moval. Specified torque

Spark plugs in cylinder head Bolt for ignition coil with output stage

22 8

166 4. Descriptions of work

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

4.69.3

Renewing spark plugs, 2.0 l TSI en‐ gines

Removing

– Remove engine cover panel ⇒ page 107 .

AG. Volkswagen AG d agen oes ksw not l o V gu by ara d e nte is r o eo h ut ra a c s s

– Release connectors -1- to -4-, and simultaneously pull all connectors off ignition coils with output stage.

ht rig py Co t.

r fo ng

– Unscrew bolts for ignition coils with output stage.

rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um en

urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d p

ility ab y li an pt ce

un le

– If fitted, unbolt earth wires -arrows-.

agen lksw Vo by

AG.

Prote cted by c o p yri gh t. C op yi

– Push puller -T10530- as far as stop into hole in ignition coil -1-. – Tighten knurled nut -2- in -direction of arrow-.

4. Descriptions of work

167

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

– Pull ignition coil on puller -T10530- in direction of -arrow- out of cylinder head cover. Repeat step for all ignition coils with output stage. Note ♦ Observe installation position of ignition coils with output

stages!

♦ Ensure that the cables are not kinked or damaged. – Unscrew spark plugs using spark plug socket -3122 B-. AG. Volkswagen AG d agen oes ksw not l o gu yV b ara d e nte is r o eo h ut ra a c s s

ht rig py Co t.

agen lksw Vo by

AG.

Prote cted by c o py rig ht . C op yi

168 4. Descriptions of work

do c um en

r fo ng

rrectness of i t to the co nform spec at i h re o n wit in t his

es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

ility ab y li an pt ce

un le

Installing

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 Note ♦ When installing new spark plugs, regrease ignition coils with

output stage using silicone paste ⇒ ETKA.

♦ The applicable silicone paste is stated in the ETKA along

with the corresponding ignition coil and/or spark plug.

– Screw in new spark plugs and tighten them to specified tor‐ que using spark plug socket -3122 B- ⇒ page 169 . – Apply a thin bead of silicone paste on the circumference of the sealing hose of the ignition coil with output stage -arrow-. – Align and insert all ignition coils with output stage one after another loosely into spark plug hole. – Press ignition coils with output stage onto spark plugs evenly by hand (do not use any tools). – Tighten bolts of ignition coils with output stage to specified torque ⇒ page 169 . – Simultaneously connect all connectors. – If present, bolt on earth wires. – Install engine cover panel ⇒ page 107 . Specified torque

Spark plugs in cylinder head Bolt for ignition coil with output stage Nut for earth wire

30 10 10

t au ss

– Remove electrical connector -2- for Lambda probe 1 before catalytic converter -GX10- from bracket and disconnect.

ht rig py Co t.

r fo ng

– Unscrew nut -2-, and move earth wire -1- clear.

rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um en

urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d p

– Remove engine cover panel ⇒ page 107 .

or ac ility ab y li an pt ce

Removing

Spark plugs: renewing, 2.0 l TSI en‐ n AG. Volkswagen AG do es n wage s k l ot g o codes DNFE, DNFF, gines (engine yV ua b d ran ir se DNFG,hoDNNA) tee un le

4.69.4

4. Descriptions of work

169

agen lksw Vo by

AG.

Prote cted by

c o p yri gh t . C op yi

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

– Release electrical connectors while simultaneously pull them off ignition coils -arrows-.

pe rm itte d

AG. Volkswagen AG d agen oes ksw not l o V gu by ara d e nte is r o eo h ut ra a c s s

agen lksw Vo by

AG.

Prote cted by c o p yri gh t. C op yi

170 4. Descriptions of work

ht rig py Co t.

r te o iva r rp fo ng

– Using puller -T10530-, carefully pull out ignition coil in verti‐ cal direction -arrow-.

in t his d o cu m en

es, in part or in w l purpos hole ercia , is n m ot com

rrectness o f i t to the co n f orm spec atio h re n wit

– Turn knurled nut -2- clockwise -arrow- until puller is fixed in position.

ility ab y li an pt ce

un le

– Insert puller -T10530- into hole -1- in ignition coil.

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 Repeat step for all ignition coils with output stage. Note ♦ Observe installation position of ignition coils with output

stages!

♦

ility ab y li an pt ce

rrectness of i t to the co nform spec a t i h re o n in wit thi s

Note

es, in part or in w l purpos hole ercia , is n m ot com

Installing

pe rm itte d

un le

–

AG. Volkswagen AG d agen oes ksw not l o Ensure that the cables are not kinked or damaged. by V gu ara d nte ise r o eo h t u ra Unscrew spark plugs using spark plug socketa -3122 B-. c s s

♦ When installing new spark plugs, regrease ignition coils with

output stage using silicone paste ⇒ ETKA.

♦ The applicable silicone paste is stated in the ETKA along

with the corresponding ignition coil and/or spark plug.

do c um en

ht rig py Co t.

r te o iva r rp fo g n

– Screw in new spark plugs and tighten them to specified tor‐ que using spark plug socket -3122 B- ⇒ page 171 .

agen lksw Vo by

AG.

Prote cted by

c o p yri gh t. C op yi

– Apply a thin bead of silicone paste on the circumference of the sealing hose of the ignition coil with output stage -arrow-. – Align and insert all ignition coils with output stage one after another loosely into spark plug hole. – Press ignition coils with output stage onto spark plugs evenly by hand (do not use any tools). – Tighten bolts of ignition coils with output stage to specified torque ⇒ page 171 . – Simultaneously connect all connectors. – If present, bolt on earth wires. – Install engine cover panel ⇒ page 107 . Specified torque

Spark plugs in cylinder head

30 4. Descriptions of work

171

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 Specified torque

G do es n ot g ua ran tee or ac

age ksw Vol y b ed ris o h t au ss

agen lksw Vo by

AG.

Prote cted by

c o p yri gh t. C op yi

172 4. Descriptions of work

do c um en

r fo ng

rrectness of i t to the co nform spec at i h re o n wit in t his

es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

ility ab y li an pt ce

un le

10 9 n AG. Volkswagen A

ht rig py Co t.

Bolt for ignition coil with output stage Nut for earth wire

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

nA wage Exhaust Vemissions test AG does not olks G. Volkswagen

y db

gu ar

ise information on the following subjects:ante This chapter provides or e h ut

or ac

un le

ility ab y li an pt ce

a Exhaust emissions test for petrol engines ⇒ page 173 ss

♦ Please observe the country specific legal regulations. ♦ The exhaust emissions test described below has been cre‐

ated according to the legal regulations valid in Germany.

5.1

Exhaust emissions test for petrol en‐ gines

Special tools and workshop equipment required ♦ Exhaust gas testing station L -VAS 7320 ANote

board diagnosis” OBD.

ht rig py Co t.

r fo ng

♦ The following description refers to vehicles fitted with “On‐

rrectness of i t to the co nform spec at i h re o n wit in t his

Note

do c um en

es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

Exhaust emissions test for diesel engines ⇒ page 175

c o p yri gh t . C op yi

♦ The OBD monitors all components and part systems influ‐ agen lksw Vo by

encing the exhaust emissions quality. Prote cted by

♦ It is possible to carry out an exhaust emissions test only AG.

when all units of the emissions testing station are connected properly and joined to each other according to the operating instructions.

♦ All work to be performed is displayed by the emissions test‐

ing station.

Test requirements •

All test conditions and data required for exhaust emissions test are found on EET data sheet for the respective engine.

•

For bar code reading the EET data sheet must be printed out.

•

Automatic gearbox: selector lever in position “P” or “N”.

•

Manual gearbox: gear lever in neutral

•

Parking brake applied

•

12V battery fully charged (if battery charge is too low, raise idling speed if necessary).

•

Hybrid vehicles: the EET is to be performed on the combus‐ tion engine.

– Perform exhaust emissions test according to instructions on display. Vehicle data input – Enter the following data: ♦ Registration number ♦ Key numbers ♦ Vehicle identification number 5. Exhaust emissions test

173

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 ♦ Type of fuel ♦ Mileage The following vehicle data can be found in the vehicle registra‐ tion certificate part 1: ♦ Registration number: “e.g. WOB-HH 1234”

n AG. Volkswagen AG do es n wage s k l ot g o yV ua b ran ed s i tee Vehicle manufacturer: “Field 2”, “Field 2.1 (code for field 2)”or h t or u ac a Vehicle identification number “field E” ss

♦ Emission key number “Field 14.1 (code for field 14)”

ility ab y li an pt ce

♦

un le

♦

es, in part or in w l purpos hole ercia , is n m ot com

rrectness o f i t to the co n f orm spec atio h re n wit

Specified data input for EET

pe rm itte d

♦ Type and version “Field D2 (type only)”, “Field 2.2 (code for field D.2)” There are different ways to enter the specified data: ♦ 1. By manual input ♦ 2. By bar code input from EET data sheet ♦ 3. Through ELSA web service Note

♦ To use the ELSA web service, the exhaust gas testing sta‐

tion L which is used for the exhaust emissions test must be integrated in the workshop network. r te o iva r rp fo ng

the specific vehicle via the network to the respective mask.

– Enter displayed values on EET data sheet in column “Test values for exhaust emissions test” on display as follows: 1-

Test speed (idling speed)

Warm-up phase for catalytic converter

Engine temperature

Increased idling speed

CO content at increased idling speed

Lambda at increased idling speed

Idling speed

Select regulating probe type; either “Step-type probe” or “Broad-band probe”.

Lambda probe value

Specified data input for EET as bar code:

174 5. Exhaust emissions test

Prote cted by

– Perform manual data input according to instructions on dis‐ play.

AG.

All test conditions and data required for exhaust emissions test can be found in the ⇒ Data sheets for exhaust emissions test for respective engine.

agen lksw Vo by

c o p yri gh t . C op yi

Note

ht rig py Co t.

Manual specified data input for EET:

in t his d o cu m en

♦ The ELSA web service automatically transmits the data for

code of EET data sheet with bar code reader. es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

un le

ility ab y li an pt ce

–

. Volkswagen AG gen AG does swa k noBrake l o Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting 2021 ➤ t gu yV b ara d e Maintenance - Edition nt11.2022 is r ee tho or ac au s If specified data for EET are available as bar code, read bar s

All data required are shown on display.

rrectness of i t to the co nform spec at i h re o n wit in t his

Inspection

– Inspect all exhaust emissions relevant components. – Check if exhaust system is fitted and complete and check for leaks and damage. Procedure

If hybrid vehicle starts in »E-Mode«, combustion engine must be activated for EET. – Take up driving position. – Wear seat belt. – Selector lever in position “P”.

r fo ng

– Press accelerator pedal to »kickdown« position.

5.2

AG.

– Follow instructions from exhaust gas testing station.

agen lksw Vo by

– Open bonnet again.

Prote cted by c o py rig ht . C op yi

Combustion engine is now active.

do c um en

– Operate brake pedal.

ht rig py Co t.

– Close bonnet.

Exhaust emissions test for diesel en‐ gines

Special tools and workshop equipment required ♦ Exhaust gas testing station L -VAS 7320 ANote ♦ The following description refers to vehicles fitted with “On‐

board diagnosis” OBD.

♦ The OBD monitors all components and part systems influ‐

encing the exhaust emissions quality.

♦ It is possible to carry out an exhaust emissions test only

when all units of the emissions testing station are connected properly and joined to each other according to the operating instructions.

♦ All work to be performed is displayed by the emissions test‐

ing station.

Test requirements •

All test conditions and data required for exhaust emissions test are found on EET data sheet for the respective engine.

•

Automatic gearbox: selector lever in “P” position

•

Manual gearbox: gear lever in neutral

•

Parking brake applied

•

12V battery fully charged (if battery charge is too low, raise idling speed if necessary).

– Perform exhaust emissions test according to instructions on display.

5. Exhaust emissions test

175

pe rm itte d

un le

ility ab y li an pt ce

AG. Volkswagen AG d agen oes ksw not l o gu yV b ara d e nte is r o eo h Arteon 2018 ➤, Arteon 2021 ➤, aArteon Shooting Brake 2021 ➤ ut ra c s Maintenance - Edition 11.2022 s

♦ Registration number ♦ Key numbers

rrectness o f i t to the co n f orm spec atio h re n wit

– Enter the following data:

es, in part or in w l purpos hole ercia , is n m ot com

Vehicle data input

♦ Vehicle identification number ♦ Type of fuel ♦ Mileage

The following vehicle data can be found in the vehicle registra‐ tion certificate part 1: ♦ Registration number: “e.g. WOB-HH 1234” ♦ Vehicle manufacturer: “Field 2”, “Field 2.1 (code for field 2)” ♦ Vehicle identification number “field E”

♦ 1. By manual input ♦ 2. By automatic data acceptance from the exhaust-emission station database Note ♦ Regarding Euro 6 vehicles with manual gearbox and info‐

tainment system, the deactivation of the idle speed limitation is carried out in the infotainment system. ⇒ page 176

♦ Euro 6 vehicles with automatic gearbox, manufactured from

week no. 48/18 do not have idle speed limitation any more.

♦ If there is no ESP or soft key in the infotainment system

to deactivate the speed limitation, the governed speed can be measured using the engine speed limited by the control unit. To do this, all the EET specifications must be entered manually.

♦ For all Euro 6 vehicles an opacity figure of max. 0.25 m -1

applies.

Deactivation of idle speed limitation of Euro 6 vehicles with manual gearbox: – Switch on ignition. – Switch on infotainment system. – Press Home function button. – Press Vehicle function button. – Tap Setup function button. – Press ESC system function button and deactivate TCS. Manual specified data input for EET:

176 5. Exhaust emissions test

AG.

There are different ways to enter the specified data:

agen lksw Vo by

Specified data input for EET

Prote cted by c o py rig ht . C op yi

♦ Nominal speed “field P4”

ht rig py Co t.

♦ Type and version “Field D2 (type only)”, “Field 2.2 (code for field D.2)”

in t his d o cu m en

r te o iva r rp fo ng

♦ Emission key No. “field 14.1 (code for field 14)”

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 olksw

Note

agen AG does not gu ara nte eo ra c

un le

♦ For the relevant test requirements and all the necessary da‐ pe rm itte d

ta for the exhaust emissions test, refer to the ⇒ Data sheets for exhaust emissions test of the respective engine.

rrectness o f i t to the co n f orm spec atio h re n wit

tration certificate part 1 or field 7 of the vehicle document and must always be entered manually.

♦ If the idle speed limitation cannot be deactivated, enter the

value 2500 ± 200 rpm in the box for rev limit and 2500 in the box for engine speed for conditioning.

– Perform manual data input according to instructions on dis‐ play. – Enter displayed values on EET data sheet in column “Test values for exhaust emissions test” on display as follows: 2-

Number of throttle bursts for conditioning

Engine oil temperature (min. value)

Select engine oil temperature measurement procedure

Idling speed

Governed speed

Nominal speed (vehicle registration certificate part 1, vehi‐ cle document)

Governed speed measuring period (1 second)

Type plate value ⇒ page 177

r te o iva r rp fo ng

Speed for conditioning

ht rig py Co t.

in t his d o cu m en

es, in part or in w l purpos hole ercia , is n m ot com

♦ The nominal speed is located in field P4 of the vehicle regis‐

ility ab y li an pt ce

AG. V agen ksw l o yV db ise r tho au

agen lksw Vo by

AG.

Prote cted by c o p yri gh t. C op yi

10 - Select probe type (no. of probe) 11 - Select measuring mode 12 - Measured period portion Note ♦ When performing the exhaust emissions test for Euro 5 ve‐

hicles, the respective engineer must always use the vehiclespecific exhaust emissions limit value indicated on the type plate.

♦ If no value is indicated on the type plate, the opacity figure

specified by the manufacturer and indicated in ELSA must be used.

♦ If no value is indicated on the type plate and no opacity

figure has been specified by the manufacturer, the statutory opacity figures (2.5 m -1 or 1.5 m -1, depending on date of initial registration) must be used.

The nominal speed can only be entered manually. If the opacity figure of Euro 5 vehicles on the EET data sheet is different from the value indicated on the type plate, enter the type plate value manually. Inspection – Inspect all exhaust emissions relevant components.

5. Exhaust emissions test

177

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 – Check if exhaust system is complete and check for leaks and damage. Procedure – Follow instructions from exhaust gas testing station. Evaluation Note

AG. Volkswagen AG d agen oes ksw not l o gu yV b ara d e nte is r o eo h ut ra a c s s

ht rig py Co t.

agen lksw Vo by

AG.

Prote cted by c o py rig ht . C op yi

178 5. Exhaust emissions test

do c um en

r te o iva r rp fo g n

rrectness of i t to the co nform spec a t i h re o n in wit thi s

es, in part or in w l purpos hole ercia , is n m ot com

pe rm itte d

ility ab y li an pt ce

un le

If the exhaust emissions test was performed at idle speed lim‐ itation, the log note “governed speed <90 % of the nominal speed (idle speed limitation)” is entered in the log.

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

00 Periodic Technical Inspection (PTI) Note

♦ The following information is provided on the basis of the

Commission Implementing Regulation (EU) 2019/621 and is intended solely as information for the regular roadworthiness testing of motor vehicles.

♦ The information on maintenance is provided as usual in the

n AG. Volkswagen AG do es n wage s k l ot g o yV ua b d ran ir se tee o h t or u ac a ss

in t his d o cu m en

ht rig py Co t.

r te o iva r rp fo ng

rrectness o f i t to the co n f orm spec atio h re n wit

es, in part or in w l purpos hole ercia , is n m ot com

pe rm itte d

ility ab y li an pt ce

un le

corresponding maintenance tables, and the activities to be performed are described in detail in the “Maintenance Man‐ ual”.

6. 00 Periodic Technical Inspection (PTI)

179

agen lksw Vo by

AG.

Prote cted by

c o p yri gh t . C op yi

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 Necessary information

AG. Volkswagen AG d agen oes ksw not l o V gu y b ara d nte ise r o eo h individual systems are in t u ra a general compatible with c s s

♦ CAN ♦ Most ♦ Flex-Ray

Standardisation: ISO TP (LAH.5G0.042.B) Implemented protocols: ♦ UDS (Unified Diag‐ nostic Services) Prote cted by

♦ Select vehicle data ♦ Identify PR number 1 Brake system 1 Mechanical . condition 1 and func‐ tionality 1 Parking Visual inspection of General description of . brake, op‐ all components dur‐ electromechanical park‐ 1 erating lev‐ ing operation of ing brake . er, ratchet brake system ♦ Electromechanical 6 parking brake ⇒ page 181

180 6. 00 Periodic Technical Inspection (PTI) ♦ ⇒ Brake system; Rep. gr. 46; Parking brake; Overview of fitting

AG.

The original status of the vehicle (as delivered) can be obtained via the PR number. Please follow document path: ♦ Identify vehicle by VIN

agen lksw Vo by

r fo ng

Implemented protocols: ♦ UDS (Unified Diag‐ nostic Services)

c o p yri gh t. C op yi

I. Vehicle2 specific . communi‐ 2 cation pa‐ rameter specifica‐ tions for tested sys‐ tem/tested function I. Vehicle3 specific in‐ formation about the originally installed system

Implemented bus sys‐ tems: ♦ LIN

rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um en

urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d p

diagnostics. For further information on this sub‐ ject for the respective items, refer to Location of vehicle inter‐ face ⇒ page 181

ht rig py Co t.

un le

Location of vehicle inter‐ face ⇒ page 181

ility ab y li an pt ce

It Description Method e m I. Vehicle1 specific de‐ scription of the location of and ac‐ cess to the vehicle in‐ terface I. Information 2 on whether the specific system supports diagnostic procedures (yes/no) If yes: I. Vehicle2 specific . bus system 1 and proto‐ col specifi‐ cations

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 General description of electromechanical parking brake Electromechanical parking brake In the case of electromechanical parking brakes, the conven‐ tional handbrake lever is replaced by a switch. The electromechanical parking brake is operated by two electric n AG. Volkswagen AG do es n motors, which act on the rear disc brakes via a gear mecha‐ olkswage ot g yV ua nism. The mechanical components are designed to hold the b d ran e tee ris is parked vehicle securely even if the on-board power supply o h t or lost. a au

un le

pe rm itte d

ility ab y li an pt ce

Warning lamps in the dash panel insert and in the button indi‐ cate whether the parking brake is activated. In addition, the activation of the brake is accompanied by an operating sound.

rrectness o f i t to the co n f orm spec atio h re n wit

Auto Hold function

es, in part or in w l purpos hole ercia , is n m ot com

The electromechanical parking brake is easy to operate via the button and offers additional convenience and safety functions, such as the dynamic pull-away assist system and the Auto Hold function.

The Auto Hold function prevents the vehicle from rolling away unintentionally when stationary or when starting off, without the need to permanently apply the brake. The system is operated by the ABS/ESC hydraulic unit. If the vehicle is braked to a standstill, the last brake pressure is stored by Auto Hold. The driver can remove the foot from the brake pedal, and all four wheel brakes will still remain applied. r te o iva r rp fo ng

ht rig py Co t.

agen lksw Vo by

AG.

This can happen, for example, when the driver brakes gently on a gradient. As soon as the driver accelerates again and lets go of the clutch (for vehicles with a manual gearbox), the brake will again be released by Auto Hold. For safety reasons, the function must then be reactivated using a button to the left of the gear lever.

in t his d o cu m en

If the ABS wheel speed sensors detect a rolling motion, the braking torque is automatically increased until the vehicle comes to a standstill again. Prote cted by c o py rig ht . C op yi

Electronic vehicle interface Note

Ensure that the selected vehicle diagnostic tester is used only with the respective diagnostic cable.

6. 00 Periodic Technical Inspection (PTI)

181

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

AG. Volkswagen AG d agen oes ksw not l o gu yV b ara d e nte is r o eo h ut ra a c s s

rrectness o f i t to the co n f orm spec atio h re n wit

Steering system check Prerequisite:

“Checking the steering system in the course of the periodic technical inspection” agen lksw Vo by

AG.

Prote cted by c o py rig ht . C op yi

Test method:

Visual inspection to ensure continuous alignment of the angle at which the steering wheel is held with the resulting steering angle of the front wheels Prerequisites for testing: Put vehicle ready into operation, and wait for system to be checked. Test sequence:

Bring steering wheel to straight-ahead position. Then turn it 180° to the left, then 360° to the right and finally 180° to the left again. Test result OK: The resulting steering angle at the front wheels continuously corresponds to the steering angle at which the steering wheel is held.

182 6. 00 Periodic Technical Inspection (PTI)

ht rig py Co t.

r te o iva r rp fo ng

The steering wheel must be moved in the same direction as the desired direction of vehicle travel. The angle at which the steer‐ ing wheel is held must at all times correspond to the steering angle of the front wheels.

in t his d o cu m en

es, in part or in w l purpos hole ercia , is n m ot com

pe rm itte d

ility ab y li an pt ce

un le

The connection for the diagnostic tester -1- is located in the lower left section of the dash panel -2-.

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

Glossary

Term

Explanation

AG. Volkswagen AG d agen o

ABS

do c um en

ht rig py Co t.

r fo ng

rrectness of i t to the co nform spec at i h re o n wit in t his

es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t itte iva d pr

un le

ility ab y li an pt ce

es n w Anti-locking brake system. The ABS ot g is a regulating system in the brake system, that olks yV ua b d ran prevents locking when braking. This helps to maintain directional stability and steerabil‐ e tee ris ity. o h t o u ra c sa All-wheel sdrive Term to be used in place of “Haldex” with immediate effect. Legal implications make coupling this step necessary. The term may nevertheless appear in older documents but need not be replaced. TCS Traction control system The TCS prevents the wheels from slipping when the vehicle is driven off. ATF Automatic Transmission Fluid. Gear oil for automatic gearbox. AU Exhaust emissions test AUS 32 Abbreviation for “Aqueous Urea Solution” with 32.5% urea content, see also (AdBlue®) ⇒ page 183 AdBlue® Is an invented name. This fluid is also referred to as “NOx reducing agent AUS 32”, “AUS 32” or “Diesel Exhaust Fluid” (in the US). AdBlue® is a colourless reducing agent that is used for exhaust post-treatment in order to reduce nitrous oxides and particulates. AdBlue® is a registered trademark of the VDA (Verband der Automobilindustrie German association of the automotive industry) in the USA, Germany, the European Union and other countries. The AdBlue urea solution is not mixed with diesel fuel, but is carried in a separate tank in the vehicle. ATF level Filling level of ATF in gearbox BEV Battery Electric Vehicle. Electric vehicle CNG Compressed Natural Gas. Compressed natural gas CO Carbon monoxide. Produced when fuels containing carbon are not combusted com‐ pletely Common rail This term refers to a common high-pressure injection line, the “rail”, which supplies all “CR” cylinders of the relevant cylinder bank with fuel. Diesel exhaust Designation used in the US for the NOx reducing agent AUS 32, or the AdBlue®. fluid DIN Deutsches Institut für Normung e.V. (German Standards Authority) DLA Dynamic Light Assist: a system with variable road illumination allows the vehicle to be driven permanently with main beam without dazzling oncoming traffic. DPF Diesel particulate filter DS Direct shift DSP Digital service plan DSG Dual clutch gearbox ATA Anti-theft alarm ECE Economic Commission for Europe eHybrid (plug-in High-performance plug-in hybrid vehicles made by Volkswagen. Even longer distances hybrid) can be covered fully electrically (commuters). eTSI (mild hybrid) Electrified power units made by Volkswagen. Savings in fuel consumption plus higher comfort. ETKA Electronic parts catalogue Part no. Abbreviation for part number EN European standard EOBD European On-Board Diagnosis ESP Electronic stabilisation program. Prevents potential vehicle skidding by targeted inter‐ vention in the brake and motor management systems. FAME Fatty acid methyl ester

7. Glossary

183

agen lksw Vo by

AG.

Prote cted by c o p yri gh t. C op yi

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 Term

Explanation GJ

pe rm itte d

r te o iva r rp fo ng

es, in part or in w l purpos hole ercia , is n m ot com

agen lksw Vo by

AG.

Prote cted by c o py rig ht . C op yi

♦ Engine oil level sensor ♦ Brake pad wear indicator QG2

The LongLife service is not factory-activated. This means vehicles have a fixed service interval display (time and mileage dependent service intervals): These vehicles are fitted with the following components: ♦ Non-flexible service interval display in dash panel insert ♦ Engine oil level sensor ♦ Brake pad wear indicator

184 7. Glossary

rrectness o f i t to the co n f orm spec atio h re n wit

in t his d o cu m en

ht rig py Co t.

un le

ility ab y li an pt ce

All-season tyre All-season tyres (also called all-weather tyres) can be used in the summer and also the winter. GTE The sports derivative as an independent vehicle concept. HEV Hybrid Electric Vehicle. Hybrid vehicle Hybrid (full hybrid) Introduction to the hybrid technology by Volkswagen. G. Volkswagenelectric AConvenient AG do cruising over agen es n short distances and at inner-city speeds. ksw l ot g o yV ua b d ran e MM Maintenance manual tee ris o h t u LongLife service The LongLife service enables extremely long inspection or oil change intervals, de‐or ac a pending on individual driving stylessand conditions under which the vehicle is used. For the LongLife service a special engine oil is required. LED Light-emitting diode LED LPG Liquefied petroleum gas. Liquefied petroleum gas or LPG MHEV (mild hy‐ Mild Hybrid Electric Vehicle brid) MIL Malfunction indicator light. American designation for exhaust emissions warning lamp K83 MPI Multi-point injection M+S Winter tyre (M+S tyre). Winter tyres are designed for low temperatures and wintry road conditions. NAR North American region NSC National sales company NOx reducing Designation of aqueous urea solution according to DIN ISO 22241-1, see also (AdBl‐ agent AUS 32 ue®) ⇒ page 183 NOx reducing Designation of aqueous urea solution according to DIN ISO 22241-1, see also (AdBl‐ agent AUS 32 ue®) ⇒ page 183 OBD On-board diagnosis. The OBD monitors all components influencing the exhaust emis‐ sions quality. OBD-II American onboard diagnosis PHEV Plug-in hybrid electric vehicle. A vehicle with hybrid drive whose battery can also be recharged externally using mains electricity. PR No. Abbreviation for production control number. It identifies among other things optional equipment, country-specific deviations PM Particulate matter. Soot particle value for diesel engine emissions PMS Particulate reduction system QG0 Vehicles are “not” factory-fitted with components for LongLife service. For mainte‐ nance, the intervals based on time and distance (non-flexible intervals) apply. QG1 Vehicles are factory-fitted with active LongLife service. This means vehicles have a flexible service interval display and are fitted with the following components: ♦ Flexible service interval display in dash panel insert

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022 Term

Explanation QG3

do c um en

ht rig py Co t.

r te o iva r rp fo g n

rrectness of i t to the co nform spec a t i h re o n in wit thi s

es, in part or in w l purpos hole ercia , is n m ot com

pe rm itte d

un le

ility ab y li an pt ce

® Registered trademark Readiness code 8-digit binary code which indicates if all exhaust relevant diagnoses have been per‐ formed by the electronic engine management. RON Research Octane Number. Measurement unit of the knock resistance of petrol SPF Particulate filter TPMS, TPLI Tyre Pressure Monitoring System, Tyre Pressure Loss Indicator SAE Society of Automotive Engineers. Association which creates proposals/guidelines for implementing legal requirements (e.g. standards). SCR With the SCR process (selective catalytic reduction) the noxious nitrogen oxides emis‐ sions are reduced to a great extent and are converted to steam and nitrogen by the urea solution. A special urea solution (AdBlue®) is injected into the exhaust system upstream of a special catalytic converter. PFI Intake manifold injection system (indirect injection system) SULEV Super Ultra Low Emission Vehicle TSI TSI turbocharger. Charging with turbocharger only. TSI twincharger. Charging with turbocharger and compressor TGI Charging with turbocharger and natural gas injection system TDI Turbo diesel engine - direct injection AG. Volkswagen G d ULEV Ultra agen low emissionAvehicle oes ksw not l o V gu ara VDAed by German association of the automotive industry nte is r o e th VW Volkswagen or ac au ss ESI Extended servicing interval ZEV Zero Emission Vehicle ASSY Assembly

7. Glossary

185

agen lksw Vo by

AG.

Prote cted by c o py rig ht . C op yi

Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤ Maintenance - Edition 11.2022

8 Date

---Change history--Chapter

Scope of modification

25/11/2 Tyres: checking condition, wear pattern, tyre Chapter updated. 022 pressure and tread depth ⇒ page 55 Brake and clutch system: changing brake fluid Chapter updated. ⇒ page 67 Connecting vehicle diagnostic tester ⇒ page 29 Chapter updated.

un le

pe rm itte d

es, in part or in w l purpos hole ercia , is n m ot com

Chapter updated. Chapter updated.

r te o iva r rp fo g n

Chapter updated.

Chapter updated. Chapter added.

AG.

Prote cted by

Chapter added.

agen lksw Vo by

c o p yri gh t. C op yi

186 8. ---Change history---

Chapter updated.

do c um en

26/11/2 Service tables up to model year ►2020 ⇒ page 021 9 Service tables as of model year 2021► ⇒ page 17 Tyres: checking condition, wear pattern, tyre pressure and tread depth ⇒ page 55 Interior filter: cleaning housing and renewing fil‐ ter element ⇒ page 156 Battery (12V): checking (applies only to Arteon eHybrid) ⇒ page 53 Selective wheel torque control: assess oil deg‐ radation on left and right sides using vehicle diagnostic tester ⇒ page 156

Chapter updated.

ht rig py Co t.

Engine oil: capacities and specifications as of model year 2021► ⇒ page 123 Engine oil: capacities and specifications up to model year ►2020 ⇒ page 122 Panoramic sliding roof ⇒ page 125

rrectness of i t to the co nform spec a t i h re o n in wit thi s

Service tables as of model year 2021► ⇒ page 17

must now be carried out for all market areas of service scopes (no longer additional work). Chapter updated. Panoramic sliding sun‐ roof/sliding sunroof: noise and function check must now be carried out for all market areas of service scopes (no longer additional work). Chapter updated.

ility ab y li an pt ce

01/07/2 Engine oil: draining, renewing oil filter and re‐ 022 plenishing engine oil ⇒ page 111 Service tables up to model year ►2020 ⇒ page 9

AG. Volkswagen AG d agen oes ksw not l o V Chapter updated. Information about oil filler gufun‐ y b ara d nel added. nte ise r o eo h t u ra Chapter updated. Panoramic sliding sun‐ a c s s roof/sliding sunroof: noise and function check