Brackets

SYSTEM GRIDS BRACKET 0.50 M

–Steel, hot dip galvanized –With half coupler –With tube connector –Used mainly to extend or shorten scaffold fields by 0.50 m –When used as a scaffold widening, two 0.61 m platforms can be installed without gaps (see picture)

Width (m) 0.50 Weight (kg) 5.40 A/F 19 PU (pcs.) 20

Article no. 007126 Price (€) 38.80

Z

BRACKET 0.73 M

–Steel, hot dip galvanized –With half coupler –With tube connector –Assembly only with support (e. g. cross diagonal, see page 25)

Width (m) 0.73 0.73 Weight (kg) 6.20 6.10 A/F 19 22 PU (pcs.) 20 20 Article no. 000585 006946 Price (€) 39.30 39.30

Z

BRACKET WITHOUT TUBE CONNECTOR 0.73 M

–Steel, hot dip galvanized –With half coupler –With integrated deck retainer

Width (m) 0.73 Weight (kg) 5.90 A/F 19 PU (pcs.) 20 Article no. 000592

BRACKET 0.73 M REINFORCED

Price (€) 37.40

–Steel, hot dip galvanized –With half coupler –With integrated deck retainer –For use up to load class 3 without bracing

Width (m) 0.73 Weight (kg) 9.30 A/F 19

FRAME BRACKET 0.73 M

PU (pcs.) 20 Article no. 009068 Price (€) 66.80

–Steel, hot dip galvanized –With two half couplers –With two tube connectors –For scaffolding extension and for the construction of a gap-free roof guard –For the creation of scaffold projections or for the construction of a gap-free roof guard

Width (m) 0.73 Weight (kg) 10.00 A/F 19 PU (pcs.) 20 Article no. 000589 Price (€) 70.40

Z

Z

Z

BRACKET 1.09 M

–Steel, hot dip galvanized –With half coupler –With tube connector –Assembly only with support (e. g. cross diagonal, see page 25)

Width (m) 1.09 1.09 Weight (kg) 9.00 9.00 A/F 19 22 PU (pcs.) 20 20 Article no. 000586 006947

CORNER BRACKET WITHOUT TUBE CONNECTOR

to be connected to one stand pipe Price (€) 88.80

–Steel, hot dip galvanized –With integrated deck retainer –A welded on half coupler at a staggered height enables two brackets 88.80

Width (m) 0.36 0.73 Weight (kg) 4.70 6.50

A/F 19 19 PU (pcs.) 20 20 Article no. 008087 008086 Price (€) 39.00 47.50

Z

Z

ROOFER BRACKET

–Steel, hot dip galvanized –With two tube connectors –Meets different requirements for ergonomic workplaces for painters and tinsmiths

CONSOL FRAME

–For use up to load class 3 –Not to be used as a roof guard scaffold

Width (m) 0.73 Weight (kg) 15.60 A/F 19 VPE 12 Article no. 000275 Price (€)

103.00

–Steel, hot dip galvanized –With two tube connectors –For use at the eaves

Height (m) 1.00 Width (m) 0.73 Weight (kg) 14.60 PU (pcs.) 50 Article no. 010918 Price (€) 105.00

Z

Z

LEDGER

–Steel, hot dip galvanized –U-profile with welded half couplers –For mounting decks in any intermediate levels

Width (m) 0.73 1.09 Weight (kg) 3.60 6.50

START LEDGER

Article no. 000594 000593 Price (€) 40.20 44.80

–Aluminum –As lower attachment for the aluminum stairs –For setting up a deck area in the base section for inside scaffold access

Width (m) 0.73 1.09 Weight (kg) 3.00 5.40

DECK TRANSOM

Article no. 000595 009148 Price (€) 32.10 37.50

–Steel, hot dip galvanized –For installation between two assembly frames to create a continuous deck area

Width (m) 0.73 1.09 Weight (kg) 4.70 6.40 Article no. 004072 002556 Price (€) 49.00 54.10