Dear Customer, Thank you for purchasing Hirisi products. Please read all the instructions in this manual carefully, before you assemble or use the product. Should you pass on this product to third parties, please hand over the instruction manual along with it.
DATA/ INFORMATION Fishing bite alarm:
Special encoded frequencies
On/off switch
Push button to change Volume, Tone, and Sensitivity
Night vision LED-Lights
High output speaker
Low battery warning
Require 1pcs 9-volt battery
2.5mm DV-connection for illuminated swinger
Standard fixed bolt with O ring
Fishing swinger:
Blue color tube
Adjustable plastic clips
Black chain which you can cut to a shorter length to hold the fishing line
Removeable seat
BATTERY Slide out the battery cover at rear of the alarm and insert on piece of 9V battery, ensuring the correct polarity and connection. As the battery is connected you will hear beeps and Led light will flash, then slide back the battery cover into place. Always have the alarm switched off when replacing or change battery. Alkaline battery is greatly recommended for maximum battery life.
TIPS
Remove the battery immediately if one of the parts fell into the water.
This unit is not waterproof but can withstand droplets of water (ex. Light rain)
Remove the battery before storing for a longer period of time, this will ensure a longer life and durability for the battery
Make sure the unit is switched off before changing or removing the battery.