Wood Stain and Finishes Deck Defense ™

Exterior Deck Finish

Deck Defense has been reengineered with a new formula for better performance, longer life, and easier application. Although it is a totally waterborne product, it has penetrating properties like oil finishes, but unlike oil-based products, it hardens into a lattice, supporting and strengthening the natural cellulosic fibers to protect from the inside out - not just on the surface. Homeowners can feel secure in the knowledge that their investment is protected from the damaging effects of wind, sun and water.

Normal maintenance has also been made easier, as there will be no need to strip off the old Deck Defense prior to re-application, as it will not flake or peel when properly applied. Just clean the surface to remove any dirt or contaminants, allow the deck to fully dry, then apply your maintenance coat.

■ Excellent weather resistance

■ Excellent color retention

■ Allows texture and grain to show

■ Low odor and VOC

■ Contains trans-oxide pigment

■ Easy application

■ Easy soap and water clean-up

■ Complementary Lifeline colors and custom colors available

Application techniques, wood species and other factors will affect the actual color when finished. We supply free samples for evaluation on your specific wood.

Surface Preparation: Must be applied to clean, dry surface.

Application Rates: Approximately 175-250 sq.ft. per gallon depending on the porosity of the wood. Please refer to product label for application instructions.

Surface Temperature: 40˚F to 95˚F

Application Methods: Airless sprayer. Pump up sprayer. Brush. Roller. Pads.

Back-brushing required to ensure even coverage. Stir before and frequently during application.

# of Coats:

Up to two coats (refer to label for specific directions for two coat application).

Drying Time: Dry to the touch in 15 minutes. Tack free in 30 minutes.

Clean up: Soap and water.

Packaging: 1-gallon container. 5-gallon pail. Samples available.

Storage/Shelf Life: Freeze/thaw stable. 1 year.