T R U & M O D E R N FLUSH WOOD DOOR AND MODERN JA M B S P E C I F I C AT I O N G U I D E
The Tru&Modern Flush Door (TMF Series) product represents a whole new approach to the flush door. One where we engineer for quality and beauty from the start. That’s why we say this is the only wood flush door that has been developed specifically for today’s modern custom homes. We hope you’ll see the attention to detail and care we’ve put into developing this product for you.
TMF1000 in Walnut with Nutmeg Stain and Flush-to-Wall Jamb.
How to Use this Guide This guide is designed to be a reference for the TruStile Standards and to provide you with the details and confidence to specify a Tru&Modern Flush Wood Door.
Contents Flush Door Construction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Veneer Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Veneer Widths . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Horizontal Veneers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Vertical Veneers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Wood Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Modern Jambs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Top:
TMF1000 in Walnut with Cappuccino Stain and Casing-Less Jamb.
Center:
TMF1000 in Mahogany with Ebony Stain and Flush-to-Wall Jamb.
Bottom: TMF1000 in Plain Sawn White Oak with Grey Mist Stain and Casing-Less Jamb.
CONSTRUC TION
Flush MDF Door Construction Core Construction • Highest quality super-refined MDF • Extremely stable LSL core • Comes standard with the Wedge Edge®, our field-proven hardwood edge system
Super-Refined MDF LSL Core Poplar Wedge Edge 1-3/8" Flush MDF Door Cross Section
Available Door Sizes • Available in 1-3/8", 1-3/4" and 2-1/4" thicknesses • Maximum size: 4' wide × 10' tall
Fire Rating • Available 20- to 90-minute
1-3/4" Flush MDF Door Cross Section
2-1/4" Flush MDF Door Cross Section
Flush Wood Door Construction Core Construction • Extremely stable LSL core • Ultra smooth HDF skins • 5/8" Hardwood lumber bands around all four sides
Doors under 80" tall do not include bottom hardwood lumber band
Veneer Specification • 1/16" Veneer • 5–6" Minimum widths • Consistent widths within face
Color & Grain Matching • Specific in-house matching rules based on species, cut & direction • Focus on visual appeal rather than yield
Available Door Sizes • Available in 1-3/4" thickness only • Maximum size: 4' wide × 10' tall
Fire-Rating • Available 20- to 90-minute
4
Flush Wood Door Cross Section Available in 1-3/4” widths only
1/16" Veneer Faces 5/8" Hardwood Lumber Bands 3/4" LSL Band HDF Backer LSL Core
VENEERS
Veneer Selection TruStile’s Flush Doors are hand crafted to accentuate the beauty found in nature. We apply strict standards based on species to achieve a look that focuses on beauty vs. yield. • 100% 1/16" flitch veneers • Sequenced bundles for each face • Focused on beauty
The best trees are sold as ½ logs, called flitches, to veneer houses that slice them into veneer sheets.
The sheets are then bundled in sequence for sale. TruStile purchases as many sequenced bundles as possible within our grading requirements.
Veneer Widths TruStile will guarantee 5" or 6" minimum veneer width and all equal veneers across the face of our doors. Minimum Veneer Width
Wood Species Quarter Sawn Red Oak Rift Sawn Red Oak Quarter Sawn White Oak
Rift Sawn White Oak Vertical Grain Douglas Fir Mahogany
5"
Cherry Clear Pine Hickory Knotty Alder Knotty Pine Select Alder
Paint-Grade Poplar Stain-Grade Poplar Plain Sawn Red Oak Plain Sawn White Oak Walnut
6"
Flush wood doors feature minimum 5" or 6" veneers widths, equally sized and spaced across the face of the door.
5
HORIZONTAL VENEERS
Horizontal Veneer Placement Horizontal veneers will be laid up and cut to ensure a balanced or centered look across doors
1
1
1
1
2
2
2
2
3
3
3
3
4
4
5
5
6
6
7
7
8
8
9
9
4
4
5
5
6
6
7
7
8
8
9 10
9
10
10
11
10
11
11
12
11
12
12
On single doors with equal number of sheets, the center seam will fall in the center of the slab.
On single doors with unequal number of staves, the middle sheet will fall in the center of the slab.
Pairs of doors are treated like a single wide door. The position of the veneers is then transfered to the individual slabs to ensure the veneer pattern aligns across both faces.
Horizontal Veneer Matching The starting point in creating a TruStile Wood Door is our veneer application standards. We handcraft each face to optimize the beauty found in natural wood. NOTE: PAIRS ARE MATCHED STANDARD. IF USING IN A PAIR APPLICATION, PLEASE ORDER AS A PAIR. We have 3 standard face composition methods for horizontal grain wood flush doors:
6
Wood Characteristics
Wood Species
Veneer Match
Tighter, more consistent grain
Quarter Sawn Red Oak Rift Sawn Red Oak Quarter Sawn White Oak
Rift Sawn White Oak Vertical Grain Douglas Fir Mahogany
Slip Match See page 7
Highly figured with more cathedraling
Cherry Clear Pine Paint-Grade Poplar Stain-Grade Poplar
Select Alder Plain Sawn Red Oak Plain Sawn White Oak Walnut
Rotated Slip Match See page 8
High character rustic
Knotty Alder Knotty Pine
Hickory
Random Matched See page 9
HORIZONTAL VENEERS
Slip Matched Veneers Flush doors with horizontal veneers are slip matched as standard on these wood species: • Mahogany • Quarter Sawn Red Oak • Quarter Sawn White Oak
• Rift Sawn Red Oak • Rift Sawn White Oak • Vertical Grain Douglas Fir
1
Single Doors
2 3
Species with more consistent, tighter grain patterns will be slip matched.
1 2
4
3
5
4
6
5
7
6
8 9
7
10
8
11
9
12
10
13
11
14 15
12 13 14 15
Pair of Doors Pairs of doors for these species will feature a slip matched look across the entire face of the pair unit. Note: Pairs are matched standard. If using in a pair application, please order as a pair.
1A
1B
2A
2B
3A
3B
4A
1A
1B
2A
2B
4B
3A
3B
5A
5B
4A
4B
6A
6B
5A
5B
7A
7B
8A
8B
6A
6B
9A
9B
7A
7B
10A
10B
8A
8B
11A
11B
9A
9B
12A
12B
10A
10B
13A
13B
14A
14B
11A
11B
15A
15B
12A
12B
13A
13B
14A
14B
15A
15B 7
HORIZONTAL VENEERS
Rotated Slip Matched Veneers Flush doors with horizontal veneers are rotated slip matched as standard on these wood species:
1 2
Species with more figuring and cathedraling will feature rotating slip match .
3 4
1
3
5
4
6
5
7 8
Stain-Grade Poplar Walnut White Maple
6
Single Doors
Plain Sawn Red Oak Plain Sawn White Oak Select Alder
2
Cherry Clear Pine Paint-Grade Poplar
7
9
8
10
9 10 2B
3A
3B
4A
4B
5A
1A
1B
3A
3B
5B
4B
6A
6B
5A
5B
7A
7B
6B
6A
8A
8B
7A
7B
9A
9B
10A
10B
8B
8A
9A
9B
10B
10A
8
2A
4A
Note: Pairs are matched standard. If using in a pair application, please order as a pair.
1B
2B
Pairs will carry this rotated slip match across the entire face of the pair.
1A
2A
Pair of Doors
HORIZONTAL VENEERS
Random Matched Veneers Flush doors with horizontal veneers are random matched as standard on these wood species: • Hickory • Knotty Alder • Knotty Pine
1 2
TruStile will employ a random match on more rustic species to provide authentic character.
3 4
1 10 9
5
12
6
7
7
5
8 9 10 11 12
3 6 11 4
Single Doors
2 8
2A
2B
3A
3B
4A
4B
5A
1A
1B
10A
10B
9A
9B
5B
6A
6B
7A
7B
7A
7B
5A
5B
8A
8B
9A
9B
3A
3B
10A
10B
6A
6B
11A
11B
11A
11B
12A
12B
4B
4A
Note: Pairs are matched standard. If using in a pair application, please order as a pair.
1B
12B
The random match rules will be carried across the face of rustic pairs.
1A
12A
Pair of Doors
2A
2B
8A
8B 9
VERTIC AL VENEERS
Vertical Veneer Placement Vertical veneers will be laid up and cut to ensure a balanced or centered look across doors
1
2
3
4
5
6
On vertical flush doors with equal number of sheets, the center seam will fall in the center of the slab.
1
2
3
4
5
6
7
On vertical flush doors with unequal number of staves, the middle sheet will fall in the center of the slab.
1
2
3
4
5
6
7
8
9 10 11 12
Pairs of doors are treated like a single wide door. The position of the veneers is then transfered to the individual slabs to ensure the veneer pattern aligns across both faces.
Vertical Veneer Matching The starting point in creating a TruStile Wood Door is our veneer application standards. We handcraft each face to optimize the beauty found in natural wood. NOTE: PAIRS ARE MATCHED STANDARD. IF USING IN A PAIR APPLICATION, PLEASE ORDER AS A PAIR. We have 3 standard face composition methods for vertical grain wood flush doors:
10
Wood Characteristics
Wood Species
Veneer Match
Tighter, more consistent grain
Quarter Sawn Red Oak Rift Sawn Red Oak Quarter Sawn White Oak
Rift Sawn White Oak Vertical Grain Douglas Fir Mahogany
Slip Match See page 11
Highly figured with more cathedraling
Cherry Clear Pine Paint-Grade Poplar Stain-Grade Poplar
Select Alder Plain Sawn Red Oak Plain Sawn White Oak Walnut
Book Matched See page 12
High character rustic
Knotty Alder Knotty Pine
Hickory
Random Matched See page 13
VERTIC AL VENEERS
Slip Matched Veneers Flush door with vertical veneers are slip matched as standard on these wood species: • Mahogany • Quarter Sawn Red Oak • Quarter Sawn White Oak
• Rift Sawn Red Oak • Rift Sawn White Oak • Vertical Grain Douglas Fir
Single Doors Species with more consistent, tighter grain patterns will be slip matched.
1
2
3
4
1
2
3
4
Pair of Doors Pair of doors for these species will feature a slip matched look across the entire face of the pair unit. Note: Pairs are matched standard. If using in a pair application, please order as a pair.
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
11
VERTIC AL VENEERS
Book Matched Veneers Flush doors with vertical veneers are book matched as standard on these wood species: Plain Sawn Red Oak Plain Sawn White Oak Select Alder
Cherry Clear Pine Paint-Grade Poplar
Stain-Grade Poplar Walnut White Maple
Single Doors Species with more figuring and cathedraling will feature book match.
1
2
3
4
1
3
Pair of Doors Pairs will carry this book match across the entire face of the pair. Note: Pairs are matched standard. If using in a pair application, please order as a pair. 1
2
3
4
5
6
7
8
1
12
3
5
7
VERTIC AL VENEERS
Random Matched Veneers Flush doors with vertical veneers are random matched as standard on these wood species: • Hickory • Knotty Alder • Knotty Pine
Single Doors TruStile will employ a random match on more rustic species to provide authentic character.
2
3
4
5
1
5
1
3
Pair of Doors The random match rules will be carried across the face of rustic pairs.
2
3
4
5
6
7
8
9
1
3
1
8
6
5
Note: Pairs are matched standard. If using in a pair application, please order as a pair.
7
9
13
WOOD CHAR AC TERISTICS
Characteristics of Natural Wood
Worm Hole
Worm Track
Vine Mark
Sound Knot
Ray or Fleck
Pitch Streak
Pin Knot
Mineral Streak
Gum Spot or Pocket
Cross Bars
Burl
Bird Peck
Bark Pocket
It is expected that wood will have naturally occurring variation. TruStile uses HPVA AA standards as a starting point to set the allowable variations by species for our Flush Wood Doors. In all cases we seek to meet or exceed HPVA AA standards.
Alder, Knotty Alder, Select Cherry Douglas Fir Hickory Mahogany Maple Pine, Clear Pine, Knotty Poplar, Paint-Grade Poplar, Stain-Grade Red Oak, Plain Sawn Red Oak, Quarter Sawn Red Oak, Rift Sawn White Oak, Plain Sawn White Oak, Quarter Sawn White Oak, Rift Sawn Walnut
Bark Pocket
Mineral Streak
Vine Mark
Small area of bark around which normal wood has grown
Well defined streak ranging from greenish-brown to black and running parallel with grain
Scar in the wood caused by the stems of clinging vines; may contain dead residue of the vine
Bird Peck Mark or wound in the wood caused by birds pecking on the growing tree Burl
Knot that is solid across its face, at least as hard as surrounding wood and shows no sign of decay; typically 1/4" in diameter
Swirl, twist or distortion in the grain which usually occurs near a knot; abrupt color variation and/ or cluster of small dark spots
Pitch Streak
Cross Bars
Ray or Fleck
Irregularity of grain resembling a dip in the grain running at right angles to the length of the veneer Gum Spot or Pocket Well defined brown or black spots containing gum; often round or teardrop-shaped 14
Pin Knot
A well-defined accumulation of pitch in the wood cells; similar to a mineral streak
Stripes of cells that extend radially; dominant in oak
Sound Knot Knot that is solid across its face, at least as hard as surrounding wood and shows no sign of decay; greater than 1/4" in diameter
Worm Track Mark caused by attacking larvae; often appear as discolorations running with or across the grain in straight to wavy streaks Worm Hole Round holes resulting from an infestation of worms
MODERN JAMB SYSTEMS
MODERN JAMB SYSTEMS
Casing-Less Jambs Cross-Section of Casing-Less Jamb Installation with Concealed Hinge Complexity Level
Recommended: Phillips U-200 trim or similar
Requires jamb installation prior to drywall
Jamb width should be same as stud width
Swing range may be limited
Cross-Section of Casing-Less Jamb Installation with Barrel Hinge Complexity Level
Recommended: Phillips L-200 trim or similar
Jambs can be installed after drywall
Swing range may be limited
16
MODERN JAMB SYSTEMS
Casing-Less Jamb Installation
Assemble and install jamb before hanging drywall.
Trim remaining drywall and install baseboard.
Lift drywall to baseboard height using a block for support. Overlap jamb with drywall to create the desired amount of reveal.
OUNT CONCEALED HINGES TO JAMB M FIRST USING SUPPLIED SCREWS.
Finish drywall edges with U-bead, J-bead or similar drywall trim.
Align door with hinges and mount with provided screws. Adjust hinges if necessary and attach cover plate.
Baseboard Idea: Return your trim to the jamb for a beautiful shadow line at the base of each opening.
17
MODERN JAMB SYSTEMS
Flush-to-Wall Jambs Cross-Section of Flush-to-Wall Jamb Installation with Concealed Hinge Complexity Level
Recommended: Phillips L-200 trim or similar Note: Drywall bead will be slightly proud. For a completely flush look oversize the jamb width accordingly. Jambs can be installed after drywall
Cross-Section of Flush-to-Wall Jamb Installation with Barrel Hinge Complexity Level
Recommended: Phillips L-200 trim or similar Note: Drywall bead will be slightly proud. For a completely flush look oversize the jamb width accordingly. Jambs can be installed after drywall
We recommend our 5/4 or 8/4 jamb to achieve a bold look.
18
MODERN JAMB SYSTEMS
Flush-to-Wall Jamb Installation
Lift drywall to baseboard height using a block for support. Mount drywall and trim to rough opening. Install jamb.
Finish remaining drywall edges and install baseboard.
Assemble and install jamb before hanging drywall. For this application, you may need to remove stop before installation.
OUNT CONCEALED HINGES TO JAMB M FIRST USING SUPPLIED SCREWS.
Finish drywall edges around jamb with L-bead or similar drywall trim.
Align door with hinges and mount with provided screws. Adjust hinges if necessary and attach cover plate.
Baseboard Idea: Consider finishing your recessed trim at the same width of your jamb for a sleek modern look.
19
MODERN JAMB SYSTEMS
Reveal Jambs Cross-Section of Reveal Jamb Installation with Concealed Hinge Complexity Level
Recommended: Fry Reglet “F” reveal or similar
Jambs can be installed after drywall
Design shim space to the dimension of your chosen reveal trim
Tip: I nsert backer rod after installation to protect the reveal and jamb through drywall finish
Cross-Section of Reveal Jamb Installation with Barrel Hinge Complexity Level
Recommended: Fry Reglet “Z” reveal or similar
Jambs can be installed after drywall
Tip: Insert backer rod after installation to protect the reveal and jamb through drywall finish
20
Design shim space to the dimension of your chosen reveal trim
MODERN JAMB SYSTEMS
Reveal Jamb Installation
Assemble and install jamb before hanging drywall. For this application, you may need to remove stop before installation.
Finish remaining drywall edges and install baseboard.
Lift drywall to baseboard height using a block for support. Mount drywall and trim to rough opening. Install jamb.
OUNT CONCEALED HINGES TO JAMB M FIRST USING SUPPLIED SCREWS. Reinstall stop if necessary.
Finish drywall edges around jamb with reveal trim.
Align door with hinges and mount with provided screws. Adjust hinges if necessary and attach cover plate.
Baseboard Idea: Continue the reveal trim and finish with painted recessed baseboard for a touch of definition within a clean modern look.
21
TRU&MODERN FLUSH WOOD DOOR SPECIFIC ATIONS
TruStile flush wood doors feature hand-selected veneers, precision matched to optimize the beautiful character found across each species of natural wood.
Distinguishing Features: • Hand matched 1/16" veneers available in horizontal and vertical grain • Highly engineered core provides stability for the door, while the matching hardwood edge provides a beautiful finish
1/16" Veneer Faces 5/8" Hardwood Lumber Bands 3/4" LSL Cross Band HDF Backer LSL Core
22
Specification
Description
Thickness
1-3/4"
Maximum size
48" × 120"
Matching for Pairs
Pair matching standard
Stiles
5/8" wood laminated to 3/4" laminated strand lumber (LSL)
Rails
5/8" wood laminated to 3/4" laminated strand lumber (LSL)
Core
HDF-faced laminated strand lumber (LSL) core
Face
1/16" wood veneer
Options
20-, 45-, 60- and 90-minute rating Refer to fire door section of our website for details
Notes
Doors under 80" tall will not have bottom lumber band
Warranty
Life of original installation See our website for complete warranty details
Factory finish
Standard stains Custom color match available
TMF1000 in Rift Sawn White Oak with Hazelnut Stain
www.trustile.com
Front Cover: TMF1000 in Rift Sawn White Oak with Hazelnut Stain and Reveal Jamb. Back Cover: TMF1000 in Plain Sawn White Oak with Grey Mist Stain.
TRUSTILE DOORS, LLC 1780 East 66th Avenue Denver, Colorado 80229 888.286.3931
Copyright © 2018 TruStile Doors, LLC. All rights reserved.