Wireless Site Lighting Control
Take All Your Outdoor Lighting To The Next Level
速
Wireless Site Lighting Control
SAFE AND SECURE, SMART AND SCALABLE
Get the most from your outdoor lighting
To take energy-savings to the next level, take control of your outdoor lighting. Not just for entry ways and facade lighting, but parking decks or lots and over the entire site. Wireless technology is the latest frontier in aggressive energy-saving strategies; it offers faster value creation and significant benefits over traditional wired solutions. wiSCAPETM brand controls from Hubbell Control Solutions offer you radically smart solutions for new construction or retrofit applications. Beside the cost of electricity, owners and managers deal with associated lighting expenses daily. Replacing failed lamps or fixtures and managing the crews, tools and service trucks that service them. Now you can reduce costs while improving performance and security.
Optimal For: • Exterior Sites • Parking Garages • Parking Lots • Business Parks • Amusement Parks • Education Campuses • “At Risk” Locations • Limited Accessibility Locations • Street Lighting
Safe and Secure: Good lighting makes pedestrian and parking areas safer and more inviting. New solutions with advanced controls help reduce costs while improving performance and security. Reduce the overall amount of energy used when your lighting adapts to the activity level on your grounds. Maintain your lighting networks more effectively. Smart: Take advantage of the wireless outdoor lighting solution perfect for controlling today’s most advanced LED luminaires. It also adapts to all other light sources as well as all voltages. Modules are available for 120-347V and 480V light sources, in either 50Hz or 60Hz. • • • • • • •
Motion and Photo Sensor Input Dimming and Switching Dry Contact Interface for Switches and Sensors Standard or Astronomical Time Clock Control User Interface from computers and tablets Software for Easy Control, Configuring, Monitoring and Metering Alarm Notifications with GPS Location of Fixtures
The Perfect Streetlight Solution Street lighting provides an essential function for any prosperous city, but accounts for nearly 40 percent of municipal electrical spending. Approximately 52.6 million streetlights nationwide consume 53 TWh of electricity per year. That represents 7% of all lighting energy used in the United States. If all of these were automated, the estimated energy savings would be 15.9 TWh / year.* For cities and utilities, lighting control provides not only a reduction in energy usage, but the data to pay only for actual energy consumed.
Scalable: No control wiring is required for configuration. wiSCAPE control installations are non-invasive and non-disruptive, making lengthy wiring processes and relay panels a thing of the past. Each wiSCAPE module *U.S. Department of Energy, 2010 features its own logic processor. Scale a system without ever having to use a router, configure network components or use a central cabinet. Implement wiSCAPE controls anywhere--use two modules in an alleyway or thousands of modules across commercial or even municipal locations. PA G E 2
MANAGED, MONITORED AND METERED With smart monitoring and metering, your lighting system performs every function that facility managers, engineers and control electricians are looking for, wirelessly. This solution suites even utilities and municipalities. Total granularity provides control over each individual luminaire on site or multiple sites. wiSCAPETM control performs every function customers are looking for:
One of the best ways to save energy is to dim or switch fixtures off when they are not needed. Lights can be dimmed (0-10V) or switched based on daylight levels, time schedules and/or sunrise and sunset. For example, parking lot lights can be turned on 15 minutes before sunset, dimmed to 50% at 11 p.m., set to full at 5 a.m., and turn off 15 minutes after sunrise. If there is a storm during the day, lighting can automatically turn on to compensate for darkened skies. • • • •
Control based on activity level is perfect for locations that have random use at night, where setting a schedule for light levels is nearly impossible. Motion sensors allow individual fixtures to dim (0-10V) or switch based upon motion from either a vehicle or pedestrian.
Pay for just the energy consumed. wiSCAPE controls allow management of each fixture’s energy use and create an energy usage report for an individual luminaire, a zone or the whole site--up to an entire city. • Fixture Modules
• Motion Sensors
Photocells Light Sensors Standard Time Clock Astronomical Time Clock
Maintain lighting networks more cost-effectively. Keeping fixtures in working order is an expense that can now be more easily managed. No more calls about a fixture being out-- you know it first. Set trigger alarm notifications for problems such as over/under voltage conditions. Not only does the wiSCAPE system report the exact problem fixture and fixture location via GPS coordinates, it also provides the information needed for maintenance crews to prioritize repairs and schedule the efficient repair routes.
Light pollution is gaining greater attention across the country as more and more cities are passing Dark Sky legislation. The wiSCAPE system helps reduce light pollution by providing control granularity down to a single fixture. Utilize a combined strategy of dimming (0-10V), scheduling, and motion control to dim or turn lights off when they are not needed. • Dimming • Scheduling • Motion Control
The wiSCAPE system is affordable. Whether retrofit or new construction, modules are compatible with all types of lighting. Wireless technology also allows for a cost effective installation, eliminating the need for trenching and wiring – practices that make controls a cost prohibitive solution. Due to the modular nature of the wiSCAPE system, additional fixtures can be added to the system at any time. • Wireless • Modular
• Alarms
PA G E 3
A SYSTEM THAT WORKS THE WAY YOU WANT A combination of wiSCAPETM fixture modules and gateways creates a wireless lighting controls solution that is adaptable to all fixture types and all voltages in both retrofit and new environments. These components create a secure peerto-peer, self-organizing and self-healing mesh network infrastructure that allows for distances of up to 1,000ft between devices. Easily manage, monitor, and meter individual fixtures or groups of fixtures over-the-air with the click of a mouse. Users can access the system from desktop or laptop computers or even tablets. The wiSCAPE system is scalable for any outdoor lighting need, from two modules in an alleyway to a hundred modules across a university campus to thousands of modules in multiple sites across a city. This lowers costs and impact on the environment.
EXAMPLE: A major city streetlight network • Over 50,000 nodes • 155 square miles coverage area • 165 zones with 100 to 1000 nodes per zone • 20%-50% additional energy savings in addition to LED retrofit • Estimated 40%-50% savings on maintenance costs
PA G E 4
A COMPLETE YET FLEXIBLE PRODUCT PLATFORM The wiSCAPETM platform of relays, controls, sensors and interfaces, supported by wiSCAPE View software, is an all-in-one range of smart products. The system is optimized to configure, control, monitor and meter all lighting sources and all voltages. wiSCAPE FIXTURE MODULES Wireless fixture modules are available for internal or external versions: • Internal Modules: 120V, 208V, 277V, 347V 50/60Hz • External Modules: 110V-480V 50/60 Hz Each wireless wiSCAPE module has the following features: • Dry Contact inputs for low voltage devices. • Dry contact output for driving external contactors. (-Internal Versions only) • 0-10V output control for Pre-set levels (programmable), Ramp speed (Up-Down), Smooth transition, Minimum and Maximum Dimming Levels, Minimum On-time before dimming, and Demand/ Response load shedding settings. • Unlimited number of schedules based on Sunrise/Sunset, Time of day, Day of week, Predefined periods and Holidays. • Real latitude and longitude location information. • Unique serial number barcode. • Works with all lighting fixtures types such as: LED, Induction, MH-HPS-LPS, Incandescent, Halogen, and Plasma.
WISCAPE GATEWAYS wiSCAPE Gateways are used to combine up to 1000 wiSCAPE Fixture Modules into a single wireless network. Although each Fixture Module is functionally autonomous, the Gateway also acts as an access point through which the modules can be managed, monitored, and metered through wiSCAPE View software. THREE SERVER OPTIONS There are three ways to manage an wiSCAPE network: 1. Local PC networked directly to the Gateway(s). 2. Local PC connected to remote Gateway(s) via the Intranet/Internet. 3. Local PC connected to remote Gateway(s) which have a cellular connection to Internet.
PA G E 5
EASY GRAPHICAL SYSTEM MANAGEMENT WITH wiSCAPETM VIEW SOFTWARE SUITE Smart operations are easy with wiSCAPE View software, a graphical system managment software platform that can configure, control, monitor and meter your lighting systems. wiSCAPE View software allows for zoom and pan mapping and satellite views, so you can observe real-time monitoring, receive instant alarm notifications from faulty lighting equipment, and increase a network’s efficiency and maintenance operations. wiSCAPE View software is compatible with industry standard protocols and is controllable from computers or tablets! wiSCAPE VIEW SOFTWARE Configure, control, monitor and meter a complete system. With this intuitive software platform , the user is able to remotely access multiple Gateways from one location. ENTERPRISE SOFTWARE Enterprise is an add-on module to wiSCAPE View software that allows the user to conveniently combine all of their Gateways into a single database. Enterprise allows single sign-on to all installed Gateways and provides all the functionality of wiSCAPE View software.
PA G E 6
BACnet SOFTWARE The BACnet software module allows easy interfacing of the wiSCAPE control system and modules with BACnet IP building automation systems. wiSCAPE VIEW FEATURES This graphical system management software comes with the following features: • • • • • • • • •
No annual software fees Password secured User-friendly Graphical User Interface Real time control status Central management of schedules, groups, scenarios, and settings Allows grouping (up to 32,000) of fixtures and advanced scenarios per group Easy reporting and exporting Server and database installed on end-user protected network Backup utility for system backup and restore
INDIVIDUAL FIXTURE MONITORING wiSCAPE TM View software enables the user to monitor and meter each individual fixture for: Voltage (V), Current (Amps), Power (W), Energy (KWh), Power factor (%), Status, On – Off – Level %, Burn time (h) and ON/OFF cycles (#).
MAP AND SATELLITE VIEWS wiSCAPE View software allows for zoom & pan mapping and satellite views, so you can observe real-time monitoring, receive instant alarm notifications from faulty lighting equipment, and increase a network’s efficiency and maintenance operations. Each fixture is populated into the mapping view based upon it’s latitude and longitude settings.
REPORTS wiSCAPE View software has a Report Generator that provides easilyunderstandable information such as: Power Metering, Fixture Module Inventory Per Gateway, History of Commands and Scenarios, Energy and Electrical Monitoring, Current Alarms, and History of Alarms.
ALARMS wiSCAPE View software can generate alarm notifications of failures identified by Fixture Modules installed in each fixture and pinpoint service issues. Problems are automatically identified and can be investigated from a central service center, reducing maintenance costs. Various parameters can be set to trigger alarm notifications including: • Power Consumption • Over /under Voltage • Low Power Factor
PA G E 7
WiSCAPETM PRODUCT PLATFORM The wiSCAPE platform of modules, controls, sensors and interfaces, supported by the wiSCAPE View software, is an all-in-one range of SMART products designed to configure, control, monitor and meter ALL fixture types.
wiSCAPE Gateway The Gateway is used to combine up to 1000 Fixture Modules into a single wireless network. Although each Fixture Module is functionally autonomous, the Gateway also acts as an access point through which the modules can be managed, monitored, and metered through wiSCAPE View software. Using the robust 2.4GHz ISM (Industrial, Scientific and Medical) radio band, the Gateway wireless control technology adapts easily to complex automation situations for quick, simple and economical commissioning and operation.
PRODUCT FEATURES • • • • • •
Module/Gateway ratio:1000 modules per Gateway Fail-safe operation- defaults to photocell control Data storage supports up to six months of rolling data storage 128-bit AES encryption Five-year limited warranty See product specification sheet for complete list of features
Ordering Information
Accessories
WIR-GATEWAY MODEL WIR-GATEWAY
Blank CM
MODEM None Cellular Modem
STEPDOWN TRANSFORMER WIR-STPDNXFMR-277 wiSCAPE Gateway 277V to 120V Stepdown WIR-STPDNXFMR-347 wiSCAPE Gateway 347V to 120V Stepdown
wiSCAPE Gateway Cellular Modem The Gateway Cellular Modem is a secure Ethernet gateway ideal for customers requiring 24/7 broadband connectivity. With simple installation and configuration requirements, the Gateway Cellular Modem is designed to handle robust, fixed applications requiring broadband communication speeds and bandwidth.
PRODUCT FEATURES • • • • • •
Ordering Information WIR-MOD-GPRS MODEL WIR-MOD-GPRS
PA G E 8
GPRS Cell Modem add-on option for wiSCAPE Gateways
Persistent 3G Network Low Power Consumption Compact Size for Easy Integration Rugged Aluminum Case Five-year limited See product specification sheet for complete list of features
wiSCAPETM Fixture Module The Fixture Module is a bidirectional wireless RF device that allows an individual fixture to be managed, monitored, and metered. The module can switch loads of up to 3 Amps and is available for voltages from 110-347VAC. Built-in 0-10V outputs also allow fixtures to be dimmed. The Fixture Module works with all fixture types including: LED, Induction, MH-HPS-LPS, Incandescent, Halogen, and Plasma. Digital and analog inputs and outputs make sending and receiving signals from additional control devices simple and easy.
PRODUCT FEATURES • • • • • • • • • • •
Switch 3 Amp loads in voltage options of 120, 208, 277 and 347VAC Outputs 0-10V for dimming ballasts (Sink+Source) Optional Inputs for low-voltage switch, motion and photo sensor Optional Dry contact output for driving external contactors Bidirectional wireless RF Mesh communications Individual addresses of unique serial numbers Multi-level grouping and multiple scenarios Programmable state after blackout, with peak shaving options Demand response (load shedding) and emergency mode ready Available in a NEMA 4 enclosure for exterior mounting See product specification sheet for complete list of features
Ordering Information
WIR-RML
MODEL wiSCAPE Wireless Relay - Long Range
24 120 208 277 347
VOLTAGE ‡ 24VAC* 120VAC 208/240VAC 277VAC 347VAC
INPUT/OUTPUT Blank None IO Input/Output
Blank N4
ENCLOSURE None NEMA 4
* Requires Power Pack/ Includes IO Option
‡ NOTE: For 480V applications a stepdown transformer is required.
wiSCAPE External Fixture Module The External Fixture Module is a bidirectional wireless RF device that allows an individual fixture to be managed, monitored and metered. The universal voltage module provides ON/OFF control and features an adaptable sink & source 0-10V output compatible with all 2-wire dimming drivers and ballast.
PRODUCT FEATURES • • • • • • • • • •
Universal 110-480 Vac On/Off outdoor lighting control with 0-10V full-range dimming Bidirectional wireless RF Mesh communications Military grade AES-128 communication encryption Multi-level grouping and multiple scenarios Adjustable minimum and maximum dimming levels Programmable power-up state with peak shaving options Remotely controllable with instantaneous metering Complete integration with wiSCAPE View software Complete reporting including alarms for maintenance optimization
Ordering Information WIP-RME
WIR-RME
MODEL wiSCAPE Wireless Relay External Module
L
RADIO COVERAGE Long Range (1000 ft)
PA G E 9
wiSCAPETM WASPTM2 Motion Sensor
TITLE
24 COMPLIANCE
The WASP2 Motion Sensor is specifically designed for control of street lighting based on occupancy. The motion sensor is also available for low-mount applications when using the appropriate lens. The sensor is available in end-mount and surface-mount versions.
PRODUCT FEATURES • •
• • • • •
Digital Passive Infrared (PIR) sensor Supported maximum mounting heights: • High mount lens: 30 ft outdoors • Low mount lens: 16 ft outdoors End-mount and surface-mount versions Interchangeable high/low area detection lens options (Available separately) Withstands low temperature and conforms to IP65 water-tight standards Five-year limited warranty See product specification sheet for complete list of features
Ordering Information WSP SENSOR MODEL
WSP
EM SM
MOUNTING End-Mount Surface-Mount
24V
VOLTAGE 24VDC (Low Voltage)
wiSCAPE Photo Sensor
LWO
LOW-TEMP Low-Temp/Water Tight/ Indoor/Outdoor
Blank BK GY
COLOR White Black Gray
TITLE
24 COMPLIANCE
The Photo Sensor provides the necessary daylight level information to the wiSCAPE Fixture Modules. Using a photodiode element, this sensor continuously measures daylight levels and sends the information to the module.
PRODUCT FEATURES • • • • • •
Ordering Information
DLCPCO
PA G E 10
MODEL Outdoor Photocell Sensor, 0-250FC
Low voltage device: 24 Vdc Open loop operation Foot-candle range: 0-250FC Mounts horizontally Five-year limited warranty See product specification sheet for complete list of features
wiSCAPETM View wiSCAPE View is an intuitive software platform that can configure, manage, monitor and meter a wiSCAPE Lighting Control System, all in one easy to use software platform. Using wiSCAPE View the user is able to remotely access multiple wiSCAPE Gateways individually from one location. wiSCAPE View comes included with each Gateway.
PRODUCT FEATURES • • • • • • • • •
Secured multi-concurrent users login and tractability Module configuration and control Creation/Editing of Scenarios - Commands - Groups - Schedules Database management Historical data logging Configuration of modules Zone Design (Virtual assignment of Relays to Zones) Power Monitoring See product specification sheet for complete list of features
Ordering Information WIR-SS
WIR-SS
MODEL wiSCAPE View Software Suite
ENTERPRISE
SOFTWARE wiSCAPE Enterprise wiSCAPE BACnet
PA G E 11
701 Millennium Blvd. Greenville, NC 29607 hubbelllighting.com
Hubbell Lighting Brands: Alera Lighting Architectural Area Lighting Beacon Products Columbia Lighting Compass Life Safety Devine Lighting Dual-Lite Hubbell Control Solutions Hubbell Industrial Hubbell Outdoor Kim Lighting Kurt Versen Litecontrol Precision-Paragon [P2] Prescolite
Hubbell Control Solutions Lighting Control Product Lines: Networked Lighting Controls NX™ Distributed Intelligence controls Wireless Lighting Controls wiHUBB® Distributed lighting controls wiSCAPE™ Outdoor lighting controls wiSTAR™ Self-powered lighting controls Daylight Harvesting Controls Zone 5™ Daylighting controls LuxStat Simple daylighting control Lighting Control Panels CX Commercial Lighting Controls LX Networked Lighting Controls Occupancy/Vacancy Sensors LightHAWK®2 Wall switch sensor LightOWL® Wall-mount occupancy sensor OMNI® Ceiling-mount occupancy sensor WASP™2 High-mount occupancy sensor Dimming WASP™ Indoor/outdoor sensor
Progress Lighting Security Lighting Systems Spaulding Lighting Sportsliter Solutions Sterner Thomas Research Products Whiteway
Hubbell, A Name You Can Trust Hubbell Control Solutions is a strong proponent of innovative, integrated energy-saving lighting controls. From introducing the industry’s first self-adaptive occupancy sensor to today’s advanced wired and wireless distributed intelligence lighting controls, the company continues to offer the most comprehensive line of occupancy sensors on the market. Other products include daylight harvesting and high bay controls. The brand is part of Hubbell Lighting, one of the largest lighting manufacturers in North America. Hubbell Lighting brands offer products for commercial, industrial and residential markets. The company’s history of innovation extends back to 1886 and Harvey Hubbell’s invention of the very first lighting control device—the pull chain switch. 9601 Dessau Rd., Building One | Austin, Texas 78754 T 512-450-1100 | F 512-450-1215 www. hubbell-controls.com © 2016 Hubbell Control Solutions. All rights reserved. Subject to change without notice. PA G E 12 are property of their respective owners. Trademarks
Doc # 4425 3-22-2016