The HUDDIG 1260C is our most powerful backhoe loader. It is equipped with a Cummins turbocharged diesel engine QSB6.7, which meets the environmental standard Stage III B l Tier 4 Interim. Engine Model Power output Type Cylinder volume Torque
Electrical system Cummins turbocharged diesel engine QSB6.7 Stage III B l Tier 4 Interim 116 kW (157 hp) at 1900 rpm Straight 6-cylinder water cooled 6.7 liters l 409 cu in 662 Nm l 488 lb ft at 800 - 1400 rpm
Transmission 2-gear hydrostatic gearbox ZF/2HL 290 Speed, 1st gear 0-10 km/hr low ratio l 0-6 mph low gear Speed, 2nd gear 0-42 km/hr high ratio l 0-26 mph high gear The transmission system is separated from the operating hydraulics.
Axles ZF Automatic differential brake with planetary hub reduction gears
Wheels Standard
520/70x34
Brake system Transport brakes Service brake
Servo assisted disc brakes Automatic engagement of transport brakes when stationary (automatic function can be disengaged)
Steering system Hydrostatic orbitrol control system with dual cylinders in the center pivot. Steering angle ±32° Frame oscillation ±8°
www.huddig.com facebook.com/huddig youtube.com/huddig
Voltage 24V Batteries 2x12V, 100 Ah Generator output 80A AC Starter motor output 5.8 kW
Hydraulic system Load sensing hydraulics with variable axial piston pumps, 60cc l 3.66 cu in + 100cc l 6.10 cu in (stepped-up pump distribution box provides a total of 174cc l 10.62 cu in). Low pressure compressor valves for backfilling and a heating system (circuit pump system) for cold starts. Internal servo supply to directional valve and return power for excavating functions. The hydraulic system is prepared for environmentally compatible hydraulic oils.
Working pressure Nom. max. flow at 1000 rpm Nom. max. flow at 1500 rpm Nom. max. flow at 2000 rpm
23.3 MPa (233 bar) l 3380 psi 176 l/min l 46 gal/min 264 l/min l 70 gal/min 352 l/min l 93 gal/min
Measurements and weight Width Height to cab roof Length Weight including bucket
2470 mm l 97 in 3110 mm l 122.5 in 8630 mm l 329 in 13200 kg l 29,101 lbs
45°
Måttuppgifter med standardskopor och 520/70x34 hjulutrustning Specifications with standard buckets and 520/70x30 wheel fittings
Backhoe L Reach M Depth N Load height O Digging width
HUDDIG AB Box 1054 824 12 Hudiksvall Sweden Tel. +46 650 375 00 info@huddig.se
8630 mm l 329 in 2600 mm l 102 in 1100 mm l 43 in 3110 mm l 122 in 4380 mm l 172 in 2300 mm l 91 in 515 mm l 20 in 32° 3700 mm l 146 in 2460 mm l 97 in 2500 mm l 98 in 2470 mm l 97 in 6288 mm l 248 in 5760 mm l 227 in 6530 mm 4900 mm 3770 mm 4200 mm
l l l l
257 in 192 in 148 in 165 in
Front loader P Reach Q Lift height leveled bucket R Load height 45° tilted bucket S Reach 45° tilt angle T Max. tilt angle U Load angle U1 Load angle in carrying position V Tilt angle ground plane X Excavation depth
2630 mm l 104 in 3500 mm l 138 in 2690 mm l 106 in 1030 mm l 40.5 in 63° 40° 46° 112° 90 mm l 3.5 in
youtube.com/huddig facebook.com/huddig www.huddig.com
HUDDIG 1260C_EN l US_201303
A Transport length B Wheelbase C Backhoe overhang D Height above cab E Transport height backhoe F Transport length backhoe G Ground clearance H Ground clearance angle, support legs I Maximum width support legs Width with support legs parked position J Width front bucket andardskopor K Width over wheels ustning r1 Swing radius outside bucket r2 Swing radius outside wheels