VS100
Men’s Short Sleeve Poplin Shirt with Pocket $3198
TOPS TOPS
MEN’S TOPS
$3198
Men’s Short Sleeve Poplin Shirt 65/35 Polyester Cotton fabric blend 4.0/4.25 oz. wt. Traditional Fit, full silhouette with generous cut for more room in body, chest, waist, and sleeve, back box pleat. Wood tone buttons, button down collar, and left chest pocket.
Color: Navy, Titanium Embroidered USDA Logo Left Chest
Available in Regular & Tall Sizes
VS101
Women’s Short Sleeve Poplin Shirt with Pocket
Women’s Short Sleeve Poplin Shirt 65/35 Polyester Cotton fabric blend 4.0/4.25 oz. wt. Traditional Fit, full silhouette with generous cut for more room in body, chest, waist, and sleeve, back box pleat. Wood tone buttons, button down collar, and left chest pocket.
Color: Navy, Titanium Embroidered USDA Logo Left Chest
MEN’S TOPS
VS102
Men’s Long Sleeve Poplin Shirt 65/35 Polyester Cotton fabric blend 4.0/4.25 oz. wt. Traditional Fit, full silhouette with generous cut for more room in body, chest, waist, and sleeve, back box pleat. Wood tone buttons, button down collar, and left chest pocket.
Color: Navy, Titanium Embroidered USDA Logo Left Chest
VS107
Women’s Short Sleeve Poplin Shirt 65/35 Polyester Cotton fabric blend 4.0/4.25 oz. wt. Traditional Fit, full silhouette with generous cut for more room in body, chest, waist, and sleeve, back box pleat. Wood tone buttons, button down collar, and left chest pocket.
Color: Navy, Titanium Embroidered USDA Logo Left Chest
VS134
Men’s Short Sleeve Chroma Soft Polyester Polo TALL
Men’s Short Sleeve 100% Peruvian Pima Cotton Pique Polo 6.8oz.
Rib Knit cuffs, pearl 3 button placket. Only available in TALL Sizing
Color: Navy, Carbon Grey
Embroidered USDA Logo Left Chest
Men’s Long Sleeve Poplin Shirt with pocket
Women’s Long Sleeve Poplin Shirt with Pocket
$3282
$2574
VS122
Men’s Short Sleeve Chroma Soft Polyester Polo
Men’s Short Sleeve Fusion Chroma Soft Polo 100% Polyester Pique 6oz wt. soft cotton-feel performance fabric moisture wicking and antimicrobial, three button placket matching colored buttons, side vents.
Color: Carbon Grey, Navy
Embroidered USDA Logo Left Chest
WOMEN’S
$2158
VS121
Women’s Short Sleeve Performance Polyester Polo
Women’s Short Sleeve Performance Polo 100% Polyester 4.1oz fabric, moisture wicking, anti microbial and UV protection performance, matching flat knit collar, FOUR button placket, side slits.
Colors: Carbon Grey, Navy
Embroidered USDA Logo Left Chest
VS130
Men’s Short Sleeve Cool & Dry Mesh Pique Polo
Men’s Short Sleeve 100% Polyester Mesh Pique Polo 4.4oz fabric, moisture wicking, UV protection, rib-knit collar, 3 button placket with dyed to match buttons.
Color: Charcoal Grey, Navy
Embroidered USDA Logo Left Chest
$2270
VS131
Women’s Short Sleeve Cool & Dry Mesh Pique Polo
Women’s Short Sleeve 100% Polyester Mesh Pique Polo 4.4oz fabric, Feminine fit, moisture wicking, UV protection, rib-knit collar, 3 button placket with dyed to match buttons.
Color: Charcoal Grey, Navy Embroidered USDA Logo Left Chest
VS120
Unisex Short Sleeve Performance Polo w/Pocket
Unisex Short Sleeve Performance Polo with Left Chest Pocket
100% Polyester 4.1oz fabric, moisture wicking, antimicrobial and UV protection performance, matching flat knit collar, three button placket, side slits.
Colors: Carbon Grey, Navy
Embroidered USDA Logo Left Chest
VS132
Unisex Short Sleeve T-Shirt Cotton/Poly Blend
Unisex Short Sleeve Dry-Power Active T-Shirt, 50/50 Cotton, Polyester blend 5.4oz fabric, (color Oxford Grey is 47/53 Cotton/ Polyester blend) Double needle stitched hemmed sleeve and bottom, Seamless 1x1 rib collar.
Color: Royal, Deep Purple, Tru Red, Kelly, Gold, Navy, Oxford Screen-Print USDA Logo Left Chest
$2318
$2462
MEN’S & WOMEN’S
OUTERWEAR OUTERWEAR
VS300
Men’s Soft Shell Jacket
Men’s Deluxe Soft Shell Jacket 96/4 Polyester Spandex 10.3oz fabric with 100% Polyester fleece lining, wind and water resistant, stand up collar, front on seam pockets, hemmed cuffs with adjustable snaps, adjustable drawstring bottom.
Color: Navy, Charcoal
Embroidered USDA Logo Left Chest
VS302
Unisex Lightweight Rain Jacket
Unisex Waterproof, windproof Storm-Tech™ fabric Rain Jacket with nylon taffeta lining, attached tuck away hood, zippered front with storm flap closure, 2 double entry pockets.
Color: Black
Heat seal USDA Logo
VS301
Women’s Soft Shell Jacket
Women’s Deluxe Soft Shell Jacket 96/4 Polyester Spandex 10.3oz fabric with 100% Polyester fleece lining, wind and water resistant, stand up collar, front on seam pockets, hemmed cuffs with adjustable snaps, adjustable drawstring bottom.
Color: Black, Navy
Embroidered USDA Logo
VS312
Unisex Long Rain Jacket with Hood
Long Raincoat Polyurethane coated nylon 48”” long, Leaf collar with snaps for detachable matching hood (included) Snap front closure with interlocking storm flap, slash openings with pockets on each side, badge tab.
Color: Yellow Heat Transfer USDA on back
$8742
$8742
$7020
HATS & ACCESSORIES HATS &
Unisex Structured Cotton Twill Baseball Cap
Baseball Cap 100% Cotton Twill, Structured, 6 Panel, pre curved visor, mid profile with adjustable hook and loop Velcro closure
Color: Black, Grey Embroidered USDA Logo
Measuring Guide
Our belts are measured from the fold over the buckle to the center hole. That distance is the waist size to order.
Our belts have 7 holes for best fit.
HOW TO MEASURE:
Have someone else measure you. Keep the tape straight but not tight. Measure over undergarments or other clothing that will be worn under your uniform. If your measurements fall between two sizes, order the larger size.
FEMALE MEASURING GUIDE AND TIPS:
HEIGHT: Stand against a wall in stocking feet. Mark a point level with the top of your head. Measure from this point down to the floor. (Shoe heels can add inches to your height.) See measurement A.
CHEST: To measure a woman’s chest, wrap the tape beneath her armpits, fully encircling her body around her shoulder plates and the fullest part of her bust. For best results, she should wear a non-padded bra and relax her arms at her sides. Make sure not to cinch the tape so tight that it compresses the bust. See measurement B.
WAIST: Measure around the smallest part of the natural waistline. Hold tape firmly but not tightly. Keep the tape level and be sure to stand naturally. See measurement C.
HIPS: Measure around the fullest part of the hips. Hold the tape measure firmly, but not tightly. Keep the tape measure straight and level. See measurement D.
INSEAM LENGTH: Lay well-fitting similarly styled pair of slacks with a flat crease at back and front. Lift one leg and measure from crotch to seam to bottom of slacks leg. See measurements M and N.
MALE MEASURING GUIDE AND TIPS:
HEIGHT: Stand against a wall in stocking feet. Mark a point level with the top of the head. Measure from this point down to the floor. See measurement E.
CHEST: Measure around the fullest part of the chest, keeping the tape under the arms and across the shoulder blades. See measurement F.
WAIST: Measure around the waist over the shirt (not slacks) at the position that you wear your slacks. Keep one finger between the tape and your body. Or, measure the waistband of a well fitting pair of similar slacks (zipped and closed). See measurement G.
SLEEVE: Measure from center of neck at back of the collar, over the shoulder, along the arm, behind the elbow, to the wrist bone, (Or take marked sleeve length sizing from a dress shirt that fits you properly). See measurement H and I.
NECK: On a shirt that fits you well, lay the collar flat. Measure the collar from the center of the collar button to the far end of the collar button hole. See measurement J or K. Or, measure comfortably around your neck.
INSEAM LENGTH: Lay well-fitting and similarly styled pair of slacks flat with the crease at the back and front. Lift one leg and measure from the crotch seam to the bottom of the slacks leg. See measurement M and N.
HEAD: Measure the distance around your head at the position where your hat normally rests, using a soft tape measure (dressmaker/ tailor type). This is usually done right above the ears and across the forehead. See measurement O.
CARE INSTRUCTIONS:
General Maintenance of Polyester & Wool Garments.
• Follow all care instructions indicated on the label sewn into every gar ment.
• Brush your uniform regularly to remove surface dirt.
• When wet, don’t dry uniform in direct sun or near severe heat.
• When not in use, hang your uniform coat and slacks on wooden hangers. Slacks should be hung at full length by the cuffs.
• Avoid carrying pointed, sharp or heavy objects in the pockets.
• Have more than one uniform and alternate wearing. This will substantially extend the life of your uniform.
The Problem of Perspiration: Perspiration can have a harmful effect on fabrics. It can result in a loss of fabric strength. To prevent this from developing, the following precautions should be taken.
-Dry cleaning solvents do not remove perspiration from a fabric. Affected areas should be called to the attention of your dry cleaner, they will flush them with moisture from a steam spotting gun prior to dry cleaning.
-Although worsted and worsted blend fabrics may not be laundered, a perspiration affected area may be placed over a towel and blotted with a damp sponge. The area should then be blotted vigorously between two dry towels, and set to air dry.
What to do about spots and stains:
The following are simple procedures for removing or reducing common stains from uniform fabrics by using common household items:
Chemicals and materials needed: Rubbing Alcohol - Sponge - Naptha: Blotter Paper - White Vinegar - White Petroleum Jelly - Glycerin - AmmoniaStarch -Detergent -Soft Toothbrush
Type of stain: Solution
Butter, Cooking Oil, Blood: Sponge and flush with Naptha, feather out and dry. Sponge with water, dry; sponge and flush with naptha, feather out and dry. Coffee, Tea, Ketchup: Sponge with water, and soak stain with glycerin. Flush well with water, feather out and dry.
Glue: Sponge with water, loosen with brush, flush with water, feather out and dry.
Iodine: Sponge with rubbing alcohol against blotter paper, feather out and dry. Mayonnaise: Apply starch/naptha paste, dry and brush off excess. Sponge and flush with naptha, feather out and dry.
Motor Oil, Tar: Apply starch/naptha paste, dry and brush off excess. Sponge and flush with naptha, feather out and dry.
Mustard: Apply dry starch, brush to remove excess. Apply glycerin for 30 minutes, flush well with water, feather out and dry. Mud/Rust: Dry and brush off excess, sponge with water. Loosen with brush, flush with water, feather out and dry. Repeat with vinegar if necessary. Ink, Ballpoint: Rub white petroleum jelly into stain. Then soak in detergent solution and launder.
Tree Sap: Mix a small amount of ammonia with water and gently rub into the spot. After a spot has dried, have garment cleaned. Grass Stains: Rub detergent or pressure wash directly into stain. Clean promptly.
NOTES: Most chemicals listed above for spot removal are flammable and should be used in a well ventilated area free of any open flame. After treatment, air dry. Never dry in a tumble dryer.
All work should be done with a clean blotter underneath the stain area. Feathering out prevents ringing and is done by starting outside the stain area, and lightly brushing towards its center.
These care procedures are provided only as a service and should not be interpreted as a warranty, implied or otherwise.
Poly/Cotton and Poly/Rayon Permanent Press Garments:
• Machine wash garments in warm water (DO NOT USE BLEACH), tumble dry (on a permanent press setting), remove promptly. Hang up so that wrinkles will fall out. Touch up using a warm iron.
• Follow care instructions shown on every garment.
• For stains, spray a prewash on soiled area and then wash as instructed above.
• Dry clean periodically to sharpen creases.
• Do not use fabric softeners.
CARE OF ITEMS:
Follow care instructions indicated on the care label sewn in every garment.
WEAR LIFE:
100% cotton garments have approximately half the wear life of Polyester, and Poly blend garments. 100% Cotton garments are not acid resistant and color loss is accelerated.
ADDITIONAL SIZE INFORMATION:
If additional size information is needed on any garments, please call a HTC - APHIS Customer Support Specialist at 1-877-482-2260, or refer to any special ordering instructions.
Need to make a return?
Please try on your new garment to check the fit before laundering. We’re sorry but we cannot accept garments for return that have been personally altered, laundered, worn or otherwise made unsalable unless the garment is defective in workmanship or materials.
Please note any pants ordered with an inseam length of 28” or less are considered Special Cuts and are non-returnable.
Request an RMA number
• Please notify HT Customer Service regarding any discrepancies with your order within 7 calendar days of receipt.
• RMA numbers must be requested within 30 days of item receipt.
• Returns must be shipped to Human Technologies within 30 days of receiving your RMA number.
• RMA numbers may be requested year round, even when the web site is unavailable.
To help us process your Return, please request a Return Material Authorization (RMA) number. You can request an RMA number by:
• Calling our Customer Service department toll-free: 877-HTC-2260 (877-482-2260).
• Emailing our Customer Service department: customersvc@htcorp.net
An RMA number and Returns Form may be downloaded from the uniform site or we will email it to you. Please complete all fields on this form, especially the reason for the Return, as this helps us continually improve the products and services we provide to you.
We are not able to process your return and issue any allowance credit without an RMA number.
Package and ship your Return
1. Please return the item(s) in the same box you received them in, (when possible).
2. Place the completed Returns Form, and a copy of your Packing List, in the box.
3. Pack items in such a way to ensure they are not lost or damaged in transit. Seal the box well.
4. Write the RMA number on the top of the carton along with your name and address.
Please send Returns to this address: HT Distribution Center Attn: USDA-APHIS-PPQ Uniform Returns 2332 Bleecker St Utica, NY 13501
We recommend that your return be shipped via an insured carrier such as UPS or Fed-Ex which provide tracking information. If you return your garments through the US Post Office, you should insure the package so it can be traced.
Once we get your Return
Upon receipt and approval of a qualified return your allowance will be credited. Please allow 3 business days from receipt of your return for processing and allowance credit.
ABOUT US
Human Technologies, established in 1954 and headquartered in Utica, New York, has operations centers throughout New York, Pennsylvania, and Delaware. We are a 501c3 not-for-profit Social Enterprise, with a mission to create employment for people with disabilities, while operating as a self-sustaining business.
Our 300+ employees provide outstanding products and services in our five main lines of business:
3PL Supply Chain Services
Uniform Management Services
Manufacturing and Packaging Operations
Facilities Management Services
Environmental Services
We are proud to add USDA Plant Protection and Quarantine to our growing customer list.
FEDERAL CUSTOMERS
• U.S. Department of Agriculture
• U.S. Air Force Air Force Security Forces Center
• U.S. Air Force Research Lab
• U.S. Defense Logistics Agency
• U.S. Department of State
• Naval Facilities Engineering Command
• U.S. Army Corps of Engineers
• U.S. General Services Administration
• U.S. Postal Service
NEW YORK STATE CUSTOMERS
• New York State Department of Corrections and Community Supervision
• New York State Department of Agriculture and Markets
• New York State Police Department
• New York City Police Department
• Nassau County Police Department
• New York State Department of Transportation
• New York State Department of Conservation
• State University of New York