Mining Division Providing pumping solutions to the Mining Industry
> www.hunterpumps.com
Hunter Pumps Sales & Service Pty Ltd is a family operated and owned business operating since 1995. We are a key supplier to the Commercial, Industrial, Mining and Civil Sectors. At Hunter Pumps we supply and manufacture a large range of pumping units that can be selected “off the shelf” or designed and customized in our Edgeworth workshop to the highest engineering standards. We work closely with engineers and designers to provide our clients with the solutions they need. Our Mining division is dedicated to providing you with the best possible solution to your problem, with the least damage to the environment and maximum protection to the personnel involved in the workplace.
2
Our commitment to: • Quality • Customer Satisfaction • Technical Expertise • Innovation
Providing our clients with the best pumping solution for their needs.
Water Supply Pump Units Hunter Pumps water supply pump units can be designed and manufactured to your every need. They have been successfully designed and installed on various large mine sites and industrial applications. Some of the areas where our systems have been supplied include: • Bath house applications • Dust suppression systems • Gland supply pump systems • Potable water supply units • Underground machinery supply pump-stations • Fire Fighting applications
These pump systems can be designed in any configuration required, and are complete with all valves, stainless steel pipework and variable speed configurations, for the easiest possible installation when delivered to site.
3
Centrifugal Water Pump Units Hunter Pumps centrifugal water pump units come in a variety of configurations & sizes to suit your application. From general water transfer to high pressure gland seal applications, Hunter Pumps has the range to suit. Our pump units can be manufactured in anything from cast iron to duplex stainless steel to suit the product being pumped and are available in a variety of styles including: • Self priming • Back pull out • Close coupled • Long coupled • Split case • Inline booster The pump impellers are also specifically designed to suit their application with vortex impellers, slurry handling, open and super vortex impellers available in any material.
Self priming > specifically designed > variety of styles > vortex impellers 4
Fire Protection Pump Units Hunter Pumps fire protection pumps are designed to cope with whatever your requirement demands. These pump systems can be designed in any configuration required, and are complete with all valves and pipework for the easiest possible installation when delivered to site. All pump sets can be designed & manufactured in any configuration, be it electric with diesel back-up, electric with generator back-up or stand alone diesel. These units fully comply with Australian Standard 2941 and are factory tested in our test bay to customer requirements. All pump units come complete with roll groove manifolds, to allow for installation as quickly and as easily as possible on site. We can also manufacture and supply: • Suction & booster assembly’s • Pressure jacking pump sets • Pressure relief valves • Annubar test points Hunter Pumps has a complete in-house design team able to completely design your system and suit all your on-site requirements.
Factory tested > electric or diesel > in-house design > complete with roll groove manifolds 5
Slurry Dewatering Hunter Pumps range of slurry dewatering pumps are the very best at what they are designed to do. The slurry dewatering range can handle from as small as 1 L/sec with a head of 70 metres to as big as 1200L/sec with a head of 50 metres in the 20 x18 pump series. The durability and wear resistance of the pumps wear parts will result in cost savings and less downtime. Being centrifugal slurry handling pumps, they have the ability to pump larger objects through the system reducing the danger of the pump failing during operation. If the job requires pumping acidic or caustic substances there are special coatings & castings available to suit. All spare parts are readily available, such as impellers, liners, bearing assemblies & mechanical seal kits off the shelf in most instances and are interchangeable with other brands.
Complete range > less downtime > spare parts > centrifugal 6
High Head Slurry Pump Systems Powerful handling of heavy duty slurry applications. • High Chrome and CD4 as standard • Capacities to 333L/S • Heads up to 320m • Patented Impeller release mechanism • Patented externally adjustable wear ring • Increased wall thickness for additional wear availability • Increased efficiencies in state of the art slurry pump design • Front and back pull out design • Three series available (Low Head -’LH’, High Head -’HH’ & Mine Dewatering -’MD’)
Four DBH 125/100 MDHM, 250 HP are used in two independent systems (inline configuration) for this mine dewatering application. This arrangement allows for double flow in peak periods. The pumps are reverse overhead motor mounted and have been running successfully for 2 years with no hard metal wear parts required.
7
Submersible Dewatering Submersible dewatering pumps Submersible dewatering pumps are suitable for pumping dirty water. The pumps have low weight and compact design for convenient transport, handling and installation. The plug-in start enables quick start-up on site, and motor protection eliminates the risk of overheating. The modular design with interchangeable spare parts makes service easy and increases flexibility.
Application Areas • Construction Sites
• Stone Cutting
• Sewage by-pass
• Irrigation
• Infrastructure
• Open Quarries
• Tunneling
• Rescue Pumping
• Flood Control
• Fire Fighting
• Dredging Motor Size 0.5-70KW Flow Max: 1220m3/h Head Max: 101m
Submersible Slurry Pumps The submersible slurry pumps are electric submersible centrifugal pumps designed for pumping abrasive and high density slurries in Mining, Heavy Industry, Civil construction and municipal applications. Flowrate up to 670l/S Head Up to 65m Max Solid Size to 60mm Discharge to 400mm Motor Sizes 7.5-315KW
8
Diesel Dewatering Hunter Pumps diesel surface dewatering pumps are well known throughout the mining industry. The diesel units can pump anything up to 12,000LPS and heads of up to 225m. With exceptional engineering and quality the pumps require less service and downtime meaning an increase in productivity and profit. The pumps are designed to be environmentally friendly; this means that there are preventative systems in place for leakages and carry over while not compromising the reliability of the pump. Fully contained units have been designed up to 110% containment level and have a reading of only 60dBA, meeting noise containment regulations. Our mine dewatering series are built to all the mining standards both mechanically and electrically, and come with your choice of diesel motor, be it Cummins, Detroit, Cat, Yanmah etc. All pumps are available with a number of optional extras, so be sure to give us a call today to discuss your needs on 1800 092 210.
Dewatering Pumps are also available for hire.
9
Dewatering Pump Pods Hunter Pumps dewatering pump pods are designed to meet the need of every individual mine site. Hunter Pumps portable pump pods range from 1000 litres to 10,000 litres. These pump pods can be fitted with either internal or external pumps, depending on your requirements. Hunter Pumps pump pods can be fitted with any lifting points including forklift access, QDS lifting attachments, and towing hitch. Before going onsite the pump pods are rigorously tested for stability for the safety of those that are operating the equipment and others in the vicinity. Our design team can ensure that your vision becomes a reality.
Trailer mounted option available > contact our design team on 1800 092 210 for further information.
Individual design > tested for safety > fitted with lifting points > designed for you 10
Pontoon Pump Stations When it comes to pontoon pump stations, Hunter Pumps are capable of designing and manufacturing your complete pontoon pumping system. Our large pontoons can be manufactured with all access walkways, floor gratings, cable tray, handrails and all lifting and fixing points to suit. Our smaller range is custom built to suit the individual pump, be it a submersible, centrifugal style or column pump. All pumps can be designed either submerged or self priming. Hunter Pumps has also been involved in sludge/slurry removal from dams using our unique pumping systems and these have proven very cost effective. For any application our design team can meet with you to discuss your requirements. With your safety and the environment in mind, all designs are produced to the highest relevant standards to ensure complete customer satisfaction.
Custom made > cost effective > environmentally friendly > submerged or self primed 11
Bore Hole Pump Units Hunter Pumps have only the best when it comes to submersible bore hole pump installations. Lowering your costs is how Hunter Pumps operates. To do this we have bore hole pumps that are made of all different materials including corrosion resistant stainless steel, bronze and marine grade stainless steel, so that the pumps can be used in any application. Using the correct material means less wear to the pump resulting in less downtime and servicing costs. The pumps can pump up to 400 L/second with heads that range from 20 metres to 480+ metres. Hunter Pumps can also mount these pump units to pontoons. This involves a bore hole pump attached to the frame of a pontoon which will suit high head dewatering applications. (See Pontoon Pump Station section) Be sure to ask our experienced team for assistance.
Supply, install, repair > corrosion resistant > less downtime > less wear
12
Air Operated Diaphragm Pumps Hunter Pumps’s Wilden range of air operated pumps and systems are recognised worldwide. They are made from cast iron or polypropylene and utilise neoprene and numerous other elastomers. They are approved for use in underground mines. These pumps are designed to cope with flow rates of up to 1174 L/Min, suction lift of 9.5 metres wet or 7.6 metres dry, and discharge capabilities of over 80 metres. Pumping corrosive substances or slurrys are not a worry for these types of pumps with their highly resistant elastomers and solids handling capabilities. Hire units and test pumps are readily available for your needs, whatever they may be. Any questions that you have feel free to contact one of our friendly staff to help guide you through the solution to your problem.
Wide Range > cast iron or polypropylene > quality control testing > underground approved
Helical Rotor Pumps Hunter Pumps only use helical rotor pumps that have been proven in service over many years, with a range of different abrasive substances pumped and have exceeded their expected life span. The helical rotor pumps that Hunter Pumps use have only the best quality parts and highest standard of workmanship. Helical rotor pumps are seen at their best when there is a high head to pump, or when there is a substantial quantity of slurry or sludge to be moved. These pumps can be coupled to both air and electric motors to suit the pump application and your need. They have the capacity to pump up to 500+ metres vertically from pit bottom in underground mining applications. Be certain to call us so we can assist you with your inquiry and your design.
13
Light/Heavy Vehicle & Train Wash Units Hunter Pumps vehicle wash units are designed to take the manual labour out of washing mine vehicles both small and large by the use of automation. Automation is the key to time efficiency and power saving. Hunter Pumps product has been tested and proven in many situations in the mining industry. These units also have a water recycle program so that water is not wasted and so the sediment that comes from the wash is discharged in an environmentally friendly way. Our service team is always available to assist with any adjustments, breakdown or advice - 24/7.
Train Wash Units > > > > 14
power saving increases efficiency saves water key to time efficiency
Portable Wheel Wash Systems Hunter Pumps can help you with your Portable Wheel Wash System needs. Contact one of our friendly sales staff on 1800 092 210 to discuss and then we can begin to configure the correct system for your site. We do offer installation configurations that range from totally portable above ground systems to permanent systems that are set in concrete. Providing solutions for:
Applicator
Air Cannon Dryer System
High Pressure Curtain Rinse
High igh Pressure Prep Stations A li t Applicator
• Construction Sites • Mining Operations • Landfills
S Scraper C Conveyor TTanks k
121'-2.500"
Filtration System Applicator Pump And Solution Station
• Energy Facilities and other Industrial applications • Portable or permanent systems available
Higher Hi h P Pressure HOMA Heavy Duty Submersible Pumps
Applicator
15
Poly Pipe And Fittings Hunter Pumps range of polyethylene products provide you with systems of the highest quality, integrity and innovation. Combining quality and service, we provide you with a purpose designed piping system that is well worth your investment. Hunter Pumps has a complete qualified team of poly pipe installers that can supply and install your pipe-line in any length, size and layout. Hunter Pumps has always good stocks of all required pipe & pipe fittings including: • Tees • Elbows (S/R and L/R) • Butt-weld flanges • Backing rings • Electrofusion With our express delivery service we will have it to you in no time at all.
Non Corrosive > installation available > increases efficiency > same day delivery 16
Victaulic Pipe And Fittings Hunter Pumps use only the best quality piping when it comes to victaulic pipe and fittings. Known worldwide for its simple but reliable design the victaulic pipe incorporates the best quality for both rigid and flexible joints. Fittings can be both bolted or toggled to allow permanent fixing and quick access. This system covers from 25mm to 400mm in the standard 2 part couplings. Hunter Pumps stocks both the shouldered & roll grooved range of pipes, valves and fittings. We also manufacture any specialist requirements such as pressure reduction stations, suction and booster brigade hydrants, to all relevant standards. Our specialist range of valves can be supplied and installed to any requirements, so be sure to ask us how.
Air Pipe and Fittings Hunter Pumps can provide efficient and economical solutions to your pneumatic problems. Hunter Pumps have the complete range of air piping and fittings. Chemical resistant, mine approved and superior strength are just three of the many positives about our products. With new ways to get air from A to B being introduced all the time, Hunter Pumps keep up to date with the latest advancements so as to inform you of progress made including our aluminium range. With these systems in your work shop, your air powered equipment will be running better than ever before. Fast, reliable and easy to fit systems also cut the cost on installation. Once a system is in place you will find that there is little to no maintenance needed to keep it in working order. These systems also help to stop moisture build-up, so that your machinery doesn’t get water inside vital parts and bring your time efficiency down. Special advice and onsite guidance is available from our friendly team at Hunter Pumps.
17
Graco Lubrication And Fluid Handling Hunter Pumps believes in the most efficient workplace and this is only achieved if everything is running smoothly. For keeping a company running in smooth working order you need the workshop to be kept clean and to function at 100%. To achieve this, ask us how we can assist to design the best setup for your workshop. Our range includes air diaphragm pumps, complete lubrication stands with reels and all attachments to suit. These can be set up both inside and outside and are tailored to your specific requirements. Hunter Pumps also design & manufacture underground lubrication pods to keep your underground machinery at the coal seam. Hunter Pumps maintain an ample stock of the Graco product, so that if you need it urgently we have it here.
Hose and Connectors Hunter Pumps have a wide range of hose and connectors available to you. Our range incorporates everything from all hose fittings, hose assemblies, pipe, pipe fittings, valves, fire protection, petroleum and specialty fittings. All hoses and fittings are manufactured to the highest of standards so you can achieve the highest possible life span to reduce downtime. All hoses to be used in underground coal mines are certified to relevant standards to ensure the highest of safety standards on your site.
18
Spare Parts and Service URGENT WORK IS OUR SPECIALITY Whether it is for an urgent onsite call or service from our warehouse, our competent service team is dedicated to providing economical repairs or replacement. Comprehensive range of pumps & spare parts Backed by a comprehensive range of pumps and spare parts, you can be guaranteed that we’ll find a solution to suit your needs. At Hunter Pumps we provide FREE technical advice on the correct selection of pumps to suit your specific application. Fully equipped workshop Our fully equipped workshop with test facilities is available to solve all your mechanical plant repair and maintenance requirements. Providing solutions and satisfying your demands of decreased downtime while getting you back on track without delay is our forte.
Miscellaneous
Gear Pumps
Chemical Dosing Pumps
Peristaltic Hose Pumps
Oil Gear Pumps
Mechanical Diaphragm Pumps
Specialised Pump Builds 19
Contact Hunter Pumps for all your pumping requirements: Water Supply Pump Units
Light/Heavy Vehicle & Train Wash Units
Fire Protection Pump Units
Helical Rotor Pump Units
Pontoon Pump Stations
Air Operated Diaphragm Pumps
Dewatering Pump Pods
Poly Pipe And Fittings
Slurry Dewatering
Lubrication And Fluid Handling
Centrifugal Water Pump Units
Victaulic Pipe And Fitting
Bore Hole Pump Units
Hose And Connectors
Diesel Dewatering Pump Units
Air Pipe And Fittings
Submersible Dewatering Pump Units
Specialist Piping Systems
PO Box 45 Cardiff NSW 2285 P 1800 092 210 E sales@hunterpumps.com
www.hunterpumps.com