June Specials! SPECIALTY TOOL SPECIALS
ADS394
$35.20
AE1167
$239.95
BCP41
$75.55
ANGLED AC/FUEL LINE DISCONNECT TOOLS • Angled handles access tight spots • Disconnects spring lock and quick connect couplings on Ford and Chrysler AC lines • Made of durable plastic that resists fuels • Works on fuel lines and other quick disconnect couplings on domestic and import vehicles • Six sizes: 5/16", 3/8", 1/2", 5/8", 3/4", 7/8" LARGE FOAM FLOOR MAT - PACK OF 5 • Closed cell foam is perfect for any odd job requiring the user to lay down • Will not break down under exposure to harsh chemicals found in the automotive, industrial and aircraft industries • Cleanable and liquid resistant • 15-1/2" x 38-1/2" 4-IN-1 BRAKE CALIPER PRESS • Works on twin and quad piston fixed calipers and single and twin piston floating calipers • Centrally located ratchet evenly distributes force to prevent misalignment of pistons • Ratchet allows for a full 360° swing so the spreader may be placed at any position • Extended reversing lever allows for easy change from spreading to retracting Sell Sheet Available
Video Available
June Specials! SPECIALTY TOOL SPECIALS
BCW18A
18 PIECE BRAKE CALIPER TOOL KIT
• • • • •
$100.80
Complete set of adapters for a wide range of vehicle applications used to prevent damaging pistons and seals New 1-piece threaded drive bodies for increased tool life Provides both left-handed and right-handed thrust bolt assemblies Designed for push-back and wind-back brake pistons Left-handed thrust bolt required for Ford, Citroen and Renault applications
BPHS4HD
4 PIECE BALL-PEEN HAMMER SET • Handles made tough from thousands of fiberglass strands encased in a proprietary resin • Moisture and chemical resistant and four times stronger than wood handles • Carbon steel heads are precision forged, heat treated, and polished and lacquer coated for rust resistance • Set contents include 16 oz., 24 oz., 32 oz. and 48 oz. hammers with a carrying case $205.15 • Lifetime warranty
BTS4
$206.30
4 PIECE FIBERGLASS HANDLE BODY TOOL SET • Most used body hammer and dolly styles • Handles made tough from thousands of fiberglass strands encased in a proprietary resin • Moisture and chemical resistant and four times stronger than wood handles • Hammer heads and dollies are heat treated forged steel • Set includes: general purpose pick hammer, curved pein finishing hammer, light dinging spoon, and toe dolly with a carrying case • Lifetime warranty
Sell Sheet Available
Video Available
June Specials! SPECIALTY TOOL SPECIALS
BT54150
BATTERY TERMINAL AND WIPER ARM PULLER • Dual-purpose puller that easily removes stuck battery terminals • Also removes bolted-on windshield wiper arms that fit over a tapered spline • Puller screw pad is designed to fit the top of the spline post for easy pulling $38.35
BUR5PC
$167.95
BUR8PC
$161.95
5 PIECE LONG CARBIDE BUR SET 4.5" • 1/4" shank, 20,000 RPM max double cut burs Only for use with die grinders rated at or adjusted below 20,000 RPM • Includes 5 popular sizes and shapes, 4.5" long for extra access in hard to reach spots • 100% Tungsten Carbide burrs quickly remove all ferrous metals including steel, cast iron, stainless, welds and sheet metal • Lifetime Warranty 8 PIECE CARBIDE BUR SET • 1/4" shank double cut burs , 30,000 RPM max • Includes 8 of the most popular sizes and shapes made from 100% Tungsten Carbide • Rapidly remove all ferrous metals including steel, cast iron, stainless, welds and sheet metal • Lifetime Warranty Sell Sheet Available
Video Available
June Specials! SPECIALTY TOOL SPECIALS
CHP6L
6 PIECE LONG HOOK AND PICK SET WITH CUSHION GRIP
• 9-3/4" Length • Great for removing small fuses, "O" rings, adjusting and retrieving small parts, removing transmission oil seals and clips $35.05
CRY933
CHRYSLER AUTO TRANSMISSION DIPSTICK • Used on all vehicles equipped with a NAG1, 42RLE, CVT transmission and the 62TE transaxle • Fits all Chrysler/Dodge/Jeep models 2005-2014 except the Sprinter and Crossfire
$93.00
DFS8
$155.95
8" DIAMOND FILE SET • Includes four extremely durable, industrial, diamond-coated files in half round, round, flat and square • Cuts ten times faster than traditional files • Smooth action, cuts in all directions • Cuts into welds and hardened surfaces • Includes custom folding pouch Sell Sheet Available
Video Available
June Specials! SPECIALTY TOOL SPECIALS
DHGM
$12.00
DLR20
$12.35
EFV8
$182.35
GM DOOR HANDLE SPRING TOOL • Allows door handle replacement without having to remove the interior door panel • It is designed to prevent damage to the door components or finish • Applications are 2014 and up Yukon, Tahoe, Suburban, Silverado, Sierra, Impala and Escalade DOOR LATCH RELEASE TOOL
• Door handle cable release tool used to release the cable from the handle so the door panel can be removed • Tool works on 2007-2013 Chevy and GMC pickups, Suburban, Tahoe, Avalanche, Denali and Yukon vehicles DRILL TEMPLATE FOR FORD • Template allows the techs to remove broken exhaust bolts from the head • Tool is designed to work on the 4.6l 5.4l 2 valve 5.4l 3 valve and the 6.8L V10 Ford engines • Kit includes: Template plates, 2- 1/8 double end drill bits, 1- 3/16 drill bit , 1- #4 Stripped Screw Extractor, and drill depth gauge on the template Sell Sheet Available
Video Available
June Specials! SPECIALTY TOOL SPECIALS
FSS5
5 PIECE OIL FILTER SOCKET SET • For use on oil and fuel filter canisters when replacing the element • Use with 3/8" drive • The 2009 and up Chevy Aveo, Pontiac G3 and 2011 and up Chevy Cruze with 1.4L, 1.6L, 1.8L motors use the 24mm socket • Set includes: 6 point 24mm, 27mm, 29mm, $57.55 32mm and 35/36mm sockets
HPR5S
$49.75
HPS3
$119.95
5 PIECE HOSE PICK REMOVER SET • Contains long and short, standard and offset hooks • Can be used to remove hoses, moldings, clips, clamps, seals, O-rings, cotter pins, gaskets, etc. • Long pullers are 13" long • Handles are dual durometer material for comfort and grip • Rods are heat-treated for strength and plated for durability 3 PIECE HOSE CLAMP PLIERS SET • Patent pending offset design allows more access in hard-to-reach areas • Tightens with just a squeeze and stays locked while you work • Used when working on vacuum systems, fuel lines and cooling and heating systems • Won't damage hoses and other flexible materials • Pivoting jaws will conform to materials Sell Sheet Available
Video Available
June Specials! SPECIALTY TOOL SPECIALS
HTDIS
MAGNETIC PICK-UP TOOL AND INSPECTION MIRROR DISPLAY
• • • • • • •
HT2 lifts over 5 Lbs. with Powercap, and telescopes HTE2 has 1-1/4" mirror for tight areas and telescopes HT1 lifts over 2-1/2 Lbs. with Powercap and telescopes HT3 lifts 10 Lbs. with Powercap and telescopes HTC2 has 2-1/4" mirror for viewing in less restricted areas and telescopes HTS2 has 3-1/4" mirror for brightest clearest viewing with room to maneuver and telescopes Eye catching counter or shelf display holds three of each
$343.50
KP1019
$26.95
LT140A
$96.85
SMALL FOAM FLOOR MAT • Will not break down under exposure to harsh chemicals found in the automotive, industrial and aircraft industries • Cleanable and liquid resistant • 10" x 19"
LOCKOUT TOOL KIT • Allows you to open the vehicle with door handle, lock button or electric switch • Multiple length applications, short, medium and across car • Glow in the dark tip • 53" long, 2-piece lock out tool eliminates storage problems Sell Sheet Available
Video Available
June Specials! SPECIALTY TOOL SPECIALS
LT146
$120.80
LT4240
$121.10
MIC1200
$271.15
3 PIECE LOCKOUT TOOL KIT • 3 piece lockout tool features snap and lock design center to increase or decrease length for easy storage • Quick-connect • Will not come apart during use • Fits in tool box/behind car seat 5 PIECE LOCKING LUGNUT TWIST SET • Removes locked or damaged lugnuts without a key • 4 sizes for maximum coverage: 3/4" (19mm), 13/16", 1", 1-3/16" and extractor punch • Twist sockets have a tapered fluted design for a tight grip • Use 1/2" drive impact or breaker bar CHARGER/MAINTAINER/STARTER • For 6V or 12V batteries • Fully automatic and microprocessor controlled • For 12V regular automotive, deep-cycle, AGM/gel cell and 6V regular batteries • 120 amp engine start for quick starting • 15 to 40 amperage 6V and 12V rapid charge with self-adjusting, variable charge rates and float-mode monitoring • 2 amp slow charge for charging small batteries and warming large ones. Charges motorcycle, ATV, snowmobile and lawn tractor batteries Sell Sheet Available
Video Available
June Specials! SPECIALTY TOOL SPECIALS
MNTS13
13" NUT/THREAD SETTER KIT
$131.95
MP15X30A
• Includes metric sizes M5, M6 & M8 and SAE 10-24, 1/4"-20 and 5/16"-18 mandrels, nosepieces and 10 rivet nuts • Change mandrel sizes by hand without wrenches using unique quick-change design • Maximum strength, patented structure outputs 30 times the input force 30 PACK MAGNETIC PICK UP TOOLS • Telescopes 5-7/8" - 25-5/8" • Picks up 1-1/2 lbs. • Ballpoint pen styling pocket clip
$197.70
MSTPA5A
$111.20
5 TON GEAR PULLER • Universal gear puller for inside and outside pulling • 2 or 3 jaw reversible and adjustable 5 ton puller • 5-1/2" reach and 7" spread • Jaws are reversible so they can pull a bearing race out of the inside of a hub, or swapped around and be used to pull flywheels from small engines, gears, bearings or pulleys
Sell Sheet Available
Video Available
June Specials! SPECIALTY TOOL SPECIALS
MST34C
15 PACK 4" MINI SCRAPERS • Heavy-duty steel scraper for tough jobs • Plastic coated handle for comfort • Steel construction gives added strength for tough scraping • Blade locked in by a screw so it will not pop out
$69.85
MST6501A
$161.95
MS15
MASTER BOLT GRIP SET • Covers most bolt grip pulling applications including the 3300 / 3800 GM V6 engines • Typical applications: steering wheels, harmonic balancers, flywheels, crankshaft pulleys and gears with tapped holes • Contains: heavy-duty forged, three way puller flange, two different length live center forcing screws, four live center adapters, eleven sets of heavy-duty washer head hardened steel bolts and one special set of shoulder bolts for the 3300 / 3800 GM V6 ADJUSTABLE MECHANIC'S STOOL WITH DRAWERS • Fully upholstered padded seat • Four 3" polyurethane wheels with full bearing casters • Powder coat finish • 17-1/8" - 21-5/8" adjustable height • Max weight: 300 lbs.
$146.85 Sell Sheet Available
Video Available
June Specials! SPECIALTY TOOL SPECIALS
MS396
MECHANIC'S STOOL • Ideal for rugged environments Durable vinyl seat construction is designed to offer a comfortable seat with a diameter of 14" • Multiple seating heights from 19" to 27" reaches the majority of workplace applications • Rugged reinforced molded nylon base with 2-1/2" industrial casters • Stool has a 250 lbs. capacity • Meets and exceeds BIFMA testing standard
$131.05
MTAP71410
$80.35
MTS18700
AXLE POPPER KIT
• Safer than a pry bar - forked end applies even pressure to both sides of the shaft for release of the shaft • Strike the wedge or use it as a pry bar to release the half shaft with tapered ends • Shim included to fill the gap between the half shaft and transaxle • Both 14" x 3" x 1/2" MASTER TERMINALS SERVICE KIT • Complete 11 piece kit to crimp and release the most popular automotive specialty terminals found on cars and trucks • For use on Deutsch open and closed barrel terminals, Weather Pack terminals, Metri Pack terminals, Molex terminals and other open barrel terminals
$371.95
Sell Sheet Available
Video Available
June Specials! SPECIALTY TOOL SPECIALS
NES1015
3 PIECE COMBO REPAIR SET • Saves you time by restoring and repairing inch or metric, coarse or fine, right or left handed external fastener threads without the need for measuring • To operate - open, close, turn, then remove • Floating cutters are self-adapting to any pitch and size within the range of the tool • No need for calibration or identifying thread Automatically chases good thread sections to repair the damaged thread section
$347.95
OSS843
OXYGEN SENSOR SOCKET WRENCH • Designed for all 7/8" and 22mm hex oxygen sensor sockets • Flexible head to get at tough angles and low clearance areas • Use on Ford Contours - 4.6L and 5.4L Ford Modular engines
$45.30
PLCOBPACK
12 PACK POCKET LIGHT COB - VARIETY
• • • • • $197.75
175 lumen Pocket clip Magnetic base Up to 7 hrs. run time 3 x AAA batteries included
Sell Sheet Available
Video Available
June Specials! SPECIALTY TOOL SPECIALS
SBT593
STRETCH BELT INSTALLER/REMOVER
$33.30
SL360R
$101.65
SP5665
$29.95
• Combination installation / removal tool for most stretch belt applications • Unique magnetic face holds the tool on the pulley 360° SWIVEL RECHARGEABLE WORK LIGHT • Hands free operation with two swivel hooks and three covered magnets • 10 super-bright SMD LEDs • High-powered 3W directional torch • Multifunction switch for high/low and torch function • Unique ball joint enables 360° swivel and tilt • Rechargeable Li-Ion battery • Included: micro USB charging port with 110V wall and 12V charging adapters ADJUSTABLE SEAL PULLER
• Head adjusts and locks in 5 positions to fit where clearance is a problem • 2 hook sizes remove most oil and grease seals • Works great on front wheel drive transaxles and front crankshaft seals without removing the radiator Sell Sheet Available
Video Available
June Specials! SPECIALTY TOOL SPECIALS
SS3K
3 PIECE OXYGEN SENSOR SOCKET SET • Vacuum switch socket designed to remove and install oxygen sensors in most domestic and many imported vehicles with a slot which allows clearance of wire and to be used with 3/8" drive tool or 1" wrench • Heated oxygen sensor socket designed with slot in socket which accommodates the connectors on heat oxygen sensors and has a double 1/2" for easy access • Offset oxygen sensor wrench has a low profile design for use in tight spaces and should be $44.35 used with a 3/8" drive tool
S300A6
SCRIBER STRAIGHT AND 90° ANGLE ENDS • Double pointed scribers with screw in point, heat treated, high carbon steel points and knurled aluminum handle • Made of high-carbon polished steel, these picks can be used to separate wires, remove small fuses and O-rings • Six (6) Pack $35.80
TC159
$40.75
MICRO TUBE CUTTER • Spring tension tube cutter keeps tension between the tubing and the blade for a tighten once and cut function • Low profile design to fit into tight spaces • Cuts from the smallest tubing up to 5/8" • 2" Length • Replaceable cutting wheel Sell Sheet Available
Video Available
June Specials! SPECIALTY TOOL SPECIALS
THD394
$214.65
TPT69700
$407.95
TRS26
$83.95
HEAVY-DUTY TOOL TROLLEY CREEPER SEAT • Designed for mechanic and shop applications that require low height work tasks • Includes a thick vinyl covered seat designed for rugged environments with a seat height of 18" • Steel, removable parts storage tray Steel tubing frame that is designed for 450 lbs. capacity and includes 4 casters (2 locking) • Lumbar support is designed with a dual back bar that helps posture at low height applications • Exceeds BIFMA testing standards 13 PIECE TURBO PRESSURE TESTER KIT • Designed to put pressure on the turbo and inlet system so leakage will be located quickly • Works on most automotive and light duty pickups with a turbo • Each adapter is lipped to allow for better grip within the turbo hose end • Can also be used on cooling system hoses • Includes: 6 sets of adapters ranging from 31mm to 90mm and a gauge with quick release valve 26 PIECE THREAD RESTORER SET • Chase out damaged threads and remove nicks and burrs without undercutting good threads • Taps and dies are highly tempered for strength and durability • Taps and dies are color-coded for quick visual identification Sell Sheet Available
Video Available
June Specials! SPECIALTY TOOL SPECIALS
TRT47
INNER TIE ROD TOOL • Works on tie rods with inaccessible flats and utilizes six crows feet to engage the wrench flats • Uses 6 crows feet to engage the wrench flats 13/16", 1-1/4", 1-5/16", 1-7/16", 33.6mm and 11/2" • Remove and install the inner tie rod without removing the rack
$158.00
TS709
3 PIECE TAP SOCKET SET
$51.00
UHWLRC
$305.05
• For larger, fractional MCTI standard taps • Ideal for use where a T-handle won't fit, especially in restricted areas • Includes: #9 socket for 5/8" (16mm), #10 socket for 11/16" (18mm) and #11 socket for 3/4"
CONVERTIBLE UNDER HOOD LIGHT • Two light output levels: 500 lumen output on low and 1,050 lumen output on high • Can run cordless form internal battery or off of the provided lock on 25 ft. 110V power cord • Can charge while light is on • Rubber coated clamps for attaching under hood • Head allows you to put light where you need it • Ideal for mounting on "A" pillars for interior or dash work; also great for use on alignment racks or under hoist to illuminate under side of vehicle • IP-65 dust and water rated
Sell Sheet Available
Video Available
June Specials! SPECIALTY TOOL SPECIALS
UPR3M
V-NOTCH UPHOLSTERY TOOL
• Small clip tool machined to allow easy removal of smaller size clips, tacks and molding pieces where clearance is a problem • Perfect for small clips used on weather stripping around doors and radiators $23.90
UPR4M
U-NOTCH UPHOLSTERY TOOL
• Retains thin notched head to allow for easy removal of flush difficult to access smaller size moldings tacks and clips where clearance is a problem $23.90
UP4SET
4 PIECE UPHOLSTERY TOOL SET • Complete set for removing door panel fasteners, upholstery and trim clips for dashboards and consoles • Ideal for tight spaces • Full polish chrome plated shanks for lasting corrosion resistance • Works on a variety of plastic and metal clips
$75.25
Sell Sheet Available
Video Available
June Specials! SPECIALTY TOOL SPECIALS
UP41
20-3/4" LONG DOOR PANEL TOOL
• P.P. and TPR material handle provides comfortable and non-slip grip • Extra long reach for hidden away clips and fasteners • Full polish chrome plated shanks for long lasting corrosion resistance
$26.20
UP42
10" DOOR UPHOLSTERY REMOVER
• P.P. and TPR material handle provides comfortable and non-slip grip • The most popular size and design • Full polish chrome plated shanks for long lasting corrosion resistance $17.70
VT1415
NON-MARRING VALVE STEM PULLER • • • •
$43.20
Vinyl spacer seats tool against rim without marring Simplify inserting any tubeless tire valve Swivel head screws onto cap thread of tire valve Handle is used as a lever to pull tire valve into rim hole
Sell Sheet Available
Video Available
June Specials! SPECIALTY TOOL SPECIALS
WCS190A
WIRE STRIPPER • • • • •
$37.15
WSP5
$59.95
203F
$254.60
Automatically adjusts to wire size Cuts and strips solid or stranded 12-22 AWG Handles single or multiple conductor wire Yields clean, nick-free results every time CAUTION: Not designed to strip Teflon or similar insulation
5-IN-1 PISTOL GRIP PLIERS/STRIPPER/CRIMPER
• Long nose pliers, cutter, stripper, bolt extractor and crimper • Ergonomic cushion grip • Great for hard-to-reach areas • 7 wire strippers (10-12-14-16-18-20-22) AWG METRIC THREAD SETTER KIT
• Set strong permanent threaded inserts in thin sheet metal • Choice of a set for fractional or metric threads • Includes Nosepieces and mandrels • KLIK-brand and "Poly-Nut" Thread inserts • Metric OD KLIK-brand "Poly-Nuts" in sizes 4mm, 5mm, 6mm, and 8mm threads • 203F - Metric Thread Setter Kit with OD KLIKbrand "Poly-Nuts" in sizes 4mm, 5mm, 6mm, and 8mm threads Sell Sheet Available
Video Available
June Specials! SPECIALTY TOOL SPECIALS
2101
7 PIECE OIL FILTER SOCKET SET
$155.95
23970
$28.75
30800
• Includes oil filter wrench sockets for foreign and domestic applications • Coverage for Mercedes-Benz, Volkswagen, Audi, BMW, Saturn, Toyota, Mazda, GM, Ford Escape Hybrid (2.3L), Dodge Sprinter, Jeep and Volvo
IN-LINE SPARK TESTER • A must for testing newer vehicles with recessed spark plugs as well as conventional and coil-on plug ignition systems • Provides information not available with OBDII code reading devices and pinpoints if there is a spark plug, plug wire, mechanical, fuel injection or electrical problem • Troubleshoots most domestic and import cars, SUVs and trucks ANGLED CV BOOT CLAMP PLIERS • For all ear-type clamps, including late model GM FWD outboard CV joints • Designed for use with a torque wrench, as required for stainless steel bands
$56.10 Sell Sheet Available
Video Available
June Specials! SPECIALTY TOOL SPECIALS
40MTDS
40PC. METRIC TAP AND DIE SET
$203.95
40STDS
• Patented rapid select ratchet • Quickly change between forward and reverse while using taps/dies without working a switch or flipping over ratchet • Proprietary Japanese Aichi grade tool steel is hardened specifically to remain sharp yet avoid breaking • Tailored for professional automotive use • 1" hex shaped dies, holders, ratchet and thread sizes all designed for automotive use • Lifetime warranty
40 PIECE SAE TAP AND DIE SET
$203.95
• Patented rapid select ratchet • Quickly change between forward and reverse while using taps/dies without working a switch or flipping over ratchet • Proprietary Japanese Aichi grade tool steel is hardened specifically to remain sharp yet avoid breaking • Tailored for professional automotive use • 1" hex shaped dies, holders, ratchet and thread sizes all designed for automotive use • Lifetime warranty
Sell Sheet Available
Video Available
June Specials! SPECIALTY TOOL SPECIALS
TOY158
TOYOTA SERPENTINE BELT WRENCH
• Allows service to be performed from top of engine • 19mm, 12-point deep socket and 14mm, 12-point shallow clearance socket • Universal tool works on most models of Toyota and Scion from 2005 to current • Handle is engineered to reach the fasteners on the serpentine belt tensioner in one quick motion, without having to lift the car, remove the wheel and also remove the splash shield located inside the inner fender well area
$119.95
Sell Sheet Available
Video Available