COMMERCIAL LAWN AND GARDEN
“Push the envelope for what’s possible.” It’s an indescribable feeling of satisfaction to have achieved something extraordinary. Far beyond what you thought was possible to achieve. This is our passion and drive. Not following already trodden paths, but instead constantly being inspired by the pursuit of progress. In short: we believe in challenging the impossible. Everything we do is about making the job easier for you. We refuse to add a new technical feature or design detail just for the sake of it. Any changes we make have to help you work smarter in some way. This mind set has throughout the years led to a long list of machines with pioneering solutions. A wide range of handheld and wheeled machines that give you the self-confdence and capability to push the envelope and make the impossible possible. In more rational terms this means more effcient and proftable commercial lawn and garden.
Read more at husqvarna.com/uk
Husqvarna conducts continuous product development and reserves the right to change designs, specifications and equipment levels without prior notification. All products with moving parts can be dangerous if used improperly. Always read the instructions carefully. Equipment and performance can vary from market to market. Ask your dealer about available equipment and performance in your market. All technical data was current at time of printing. However such data is subject to change due to product development. We cannot accept responsibility for printing errors.
News
4
Business solutions
8
Brushcutters and trimmers
12
Hedge trimmers
36
Blowers
44
Chainsaws
50
Power cutters
66
Front mowers
74
Lawnmowers
90
A RANGE OF PRODUCTS FOR YOUR EVERY NEED
16
HUSQVARNA 555RXT 53.3 cm≥, 2.8 kW, 9.2 kg.
16
HUSQVARNA 545RXT 45.7 cm≥, 2.1 kW, 8.5 kg.
17
HUSQVARNA 535RX 34.6 cm≥, 1.6 kW, 6.1 kg.
16
17
HUSQVARNA 545RX 45.7 cm≥, 2.1 kW, 8.7 kg.
HUSQVARNA 535RXT 34.6 cm≥, 1.6 kW, 6.2 kg.
17
19
HUSQVARNA 327RX 24.5 cm≥, 0.9 kW, 5.4 kg.
19
HUSQVARNA 553RBX 50.6 cm≥, 2.3 kW, 12.1 kg.
HUSQVARNA 324RX 25 cm≥, 0.8 kW, 5.5 kg. Not available in UK.
20
23
HUSQVARNA 327LDX 24.5 cm≥, 0.9 kW, 5.1 kg.
24
HUSQVARNA 327RDX 24.5 cm≥, 0.9 kW, 5.6 kg.
Not available in UK.
26
26
24
HUSQVARNA 336RK 34.6 cm≥, 1.4 kW, 7.4 kg.
HUSQVARNA 543RBK 40.1 cm≥, 1.5 kW, 10.9 kg.
Not available in UK.
Not available in UK.
27
38
59
HUSQVARNA 536LiL BLDC, 36 V, 4.3 kg. *
HUSQVARNA 536LiR BLDC, 36 V, 5.1 kg. *
incl. std. battery.
incl. std. battery.
* weight
38
HUSQVARNA 226HS75S 23.6 cm≥, 0.85 kW, 75 cm, 5.8 kg.
39
HUSQVARNA 536LiHD70X 36 V, 70 cm, 5.1 kg. * * weight incl. std. battery. Not available in UK.
* weight
38
HUSQVARNA BLi520X / BLi940X 14.4 Ah, 5.9 kg / 26.1 Ah, 6.7 kg.
HUSQVARNA 226HS99S 23.6 cm≥, 0.85 kW, 108 cm, 6.1 kg.
38
HUSQVARNA 226HD75S 23.6 cm≥, 0.85 kW, 75 cm, 6 kg.
41
39
HUSQVARNA 226HD60S 23.6 cm≥, 0.85 kW, 60 cm, 5.8 kg.
41
HUSQVARNA 327HDA65X 24.5 cm≥, 0.9 kW, 65 cm, 6.2 kg.
HUSQVARNA 536LiHD60X 36 V, 60 cm, 5.0 kg. * * weight
incl. std. battery.
41
HUSQVARNA 327HE3X 24.5 cm≥, 0.9 kW, 55 cm, 6.5 kg.
HUSQVARNA 327HE4X 24.5 cm≥, 0.9 kW, 55 cm, 6.6 kg.
Not available in UK.
46
47 HUSQVARNA 356BTX 51.7 cm≥, 13.4 m≥ / min, 79.13 m / s, 10.4 kg.
47 HUSQVARNA 580BTS 75.6 cm≥, 25.7 m≥ / min, 92.2 m / s, 11.8 kg.
HUSQVARNA 570BTS 65.6 cm≥, 21.8 m≥ / min, 105.6 m / s, 11.2 kg.
54
54
HUSQVARNA T540 XP ® 37.7 cm≥, 1.8 kW, 30 – 40 cm, 3.7 kg.
56
56
HUSQVARNA 543 XP ® 43.1 cm≥, 2.2 kW, 33 – 45 cm, 4.5 kg.
HUSQVARNA T435 35.2 cm≥, 1.5 kW, 30 – 35 cm, 3.4 kg.
HUSQVARNA 550 XP ® 50.1 cm≥, 2.8 kW, 33 – 50 cm, 4.9 kg.
Not available in UK.
56
56
56
HUSQVARNA 545 TRIOBRAKE ™ 50.1 cm≥, 2.5 kW, 33 – 50 cm, 5 kg.
HUSQVARNA 545 50.1 cm≥, 2.5 kW, 33 – 50 cm, 4.9 kg.
HUSQVARNA 550 XP ® TRIOBRAKE ™ 50.1 cm≥, 2.8 kW, 33 – 50 cm, 5 kg.
57
HUSQVARNA 560 XP ® 59.8 cm≥, 3.5 kW, 33 – 60 cm, 5.6 kg.
Not available in UK.
57
57
HUSQVARNA 562 XP ® 59.8 cm≥, 3.5 kW, 38 – 70 cm, 5.7 kg.
57
HUSQVARNA 555 59.8 cm≥, 3.1 kW, 33 – 60 cm, 5.6 kg.
57
HUSQVARNA 576 XP ® 73.5 cm≥, 4.2 kW, 38 – 70 cm, 6.8 kg.
Not available in UK.
HUSQVARNA 570 67.9 cm≥, 3.6 kW, 38 – 70 cm, 6.6 kg. Not available in UK.
58
58
59
HUSQVARNA 436Li BLDC, 36 V, 25 – 35 cm, 3.8 kg. *
HUSQVARNA 536Li XP ® BLDC, 36 V, 25 – 35 cm, 3.7 kg. *
HUSQVARNA T536Li XP ® BLDC, 36 V, 25 – 35 cm, 3.6 kg. *
* weight
* weight
* weight
incl. std. battery.
60
incl. std. battery.
60
HUSQVARNA 327P5X 24.5 cm≥, 0.9 kW, 350 cm, 6.4 kg.
incl. std. battery.
60
HUSQVARNA 327P4 24.5 cm≥, 0.9 kW, 240 cm, 6.1 kg.
HUSQVARNA 327PT5S 24.5 cm≥, 0.9 kW, 397 cm, 7.3 kg.
Not available in UK.
68
HUSQVARNA K 760 74 cm≥, 3.7 kW, 9.6 / 9.8 kg.
78
68
69
HUSQVARNA K 970 94 cm≥, 4.8 kW, 10.6 / 11.0 / 11.8 kg.
69
HUSQVARNA K 1260 119 cm≥, 5.8 kW, 13.7 / 14.4 kg.
78
HUSQVARNA K 3000 VAC 230 / 120 / 110 V, 2700 / 1800 / 2200 W, 8.9 kg.
84
69
HUSQVARNA K 3000 WET 230 / 120 / 110 V, 2700 / 1800 / 2200 W, 8.5 kg.
92 HUSQVARNA LB 553S Honda, 160 cm≥, 2.8 kW @ 2900 rpm.
93 HUSQVARNA LB 553S e Honda, 160 cm≥, 2.8 kW @ 2900 rpm. HUSQVARNA P 525D Kubota, 18.7 kW @ 3000 rpm.
HUSQVARNA P 520D Kubota, 14.5 kW @ 3000 rpm.
HUSQVARNA P 524 Kawasaki, 13.9 kW @ 3000 rpm.
News
Newcomers that will help you keep up to speed. The close cooperation we enjoy with professional users – combined with pioneering thinking and top-quality engineering skills – has yielded a wide range of innovative products over the years. For us it is an ongoing process that has no conclusion. The latest results of this work can be found here: machinery, accessories and clothing that all have one thing in common – to help you work effciently and comfortably in all possible situations.
y POWER EffICIENT BATTER HUSQVARNA 536LiHD60X / HUSQVARNA 536LiHD70X * Powerful, lightweight and ergonomic battery powered hedge trimmers with low levels of noise and vibration. New effcient motor and new battery with longer runtime maximizes your working hours. * Not available in UK.
y WORK A WHOLE DA BACKPACK BATTERIES BLi520X / BLi940X Back-mounted Li-Ion battery with a unique, ergonomic harness for comfortable operation. Gives you the option of working up to a full day with our handheld battery products.
HUSQVARNA 543 XP ® Versatile saws that are robust, effcient and comfortable to use. Like most of our other XP® chainsaws the 543 XP® is also available with heated handles (XP®G). Not available in UK. HUSQVARNA 550 XP ® TRIOBRAKE ™ / 545 TRIOBRAKE ™ The compact and highly effcient 550 XP®, as well as the powerful and versatile 545 are now available with our unique chain brake TrioBrake™. Not available in UK.
4
NEVER MIND TH
E WEATHER
ALL-WEATHER CLOTHES, TECHNICAL, WITH GORE-TEX® LAMINATE Jacket and trousers of durable materials, designed to help you work effciently. GoRE-TEX® laminate is both breathable and resists rain and wind effectively.
JACKET, TECHNICAL HIGH VIz High-visibility jacket with tight ft, two-way stretch material and good ventilation. Designed to give you great freedom of movement and to keep you cool at all times. Tested and approved according to EN 471:2004 and A1 2007 (class 3). Not available in UK.
Not available in UK.
fOREST HELMET, TECHNICAL A robust yet lightweight helmet with a completely new design. Can be adjusted to ft you perfectly – without sacrifcing good ventilation properties even during extended work shifts.
BRUSCHCUTTING- AND TRIMMER CLOTHES, TECHNICAL Jacket and trousers made of specially treated, durable materials with reinforcements on exposed areas. Designed for effcient and comfortable work when wearing a harness with a brushcutter or a trimmer.
COMBI CAN Newly designed can that ensures you avoid spills and overflled chainsaws. Has containers for both fuel and chain oil. Also has new, double-sided compartments for tools and small spare parts.
5
A new power source. Unchanged performance. We’re introducing The Husqvarna Battery Series. This is a range of high-effcient handheld machines driven by a powerful 36V Li-ion battery pack. The battery gives you high and constant power, a performance similar to our petrol machines. You get signifcantly less noise, maintenance, vibrations – and no emissions at all. Also, you’re able to exchange battery from one machine to another, and keep working.
The charger is ready before you are. The new battery comes with an extremely fast charger. If you have two batteries, you’re able to work nonstop since the charging time is shorter than the usual working time (4,2 Ah = 35 min).
6
RECHARGE AT ANy TIME There is no memory effect, even if you recharge partly empty batteries.
INTELLIGENT DISCHARGE MANAGEMENT Protects from deep discharge and assures extra long lifetime.
QUICK–START CHARGING SySTEM Active battery cooling after use shortens the recharge time.
INTELLIGENT CHARGING POWER MANAGEMENT Each battery cell is monitored to optimise the charging process.
THERMO BAG Protects batteries from cold and dirt to ensure trouble-free work.
Back-mounted power for nonstop working. Our new back-mounted Li-Ion battery gives you the option of working up to a full day with our handheld battery machines. It has a durable design, along with several unique, ergonomic solutions. The harness can be adjusted to suit your height and is thereby easy on your back and shoulders. The shoulder straps follow the movement of your shoulders, making sure you always work effciently and comfortably. You simply remove the battery from the harness to charge it. And thanks to the built-in cooling system, the cells do not need to cool down before you can quickly charge the battery and start working again.
THE POWER YOU NEED
WORk iN SiLENCE
Our specially developed, brushless motors give you long lasting and superb performance. As a matter of fact, they are 25 % more effcient than a standard brush engine. This means that the engines provide high and consistent torque – even when you cut high, thick or wet grass and brushwood. They just keep on going at an unchanged speed that outshines some of the petrol-driven machines on the market.
The noise level at your ear from a petrol-powered trimmer is 94 dB(A). A battery machine gives 81 dB(A) which equates to 13 dB(A) less noise. A difference that is really noticeable. It is generally recognised that a reduction of 3 dB(A) is perceived as a halving of the noise level. The low noise level of battery machines makes life a lot more pleasant for you – and also allows you to work in the most public of settings.
EXTREMELy CONVENIENT WORK Our battery machines are light and well balanced, which contributes to you always working in a comfortable position. The sturdy construction consists of the front handle being close to the centre of gravity of our machines. And the battery is located between the handles. These solutions make it easy to twist and turn the machines with little effort. Also, the battery technology reduces vibrations dramatically. This means that you’re able to work longer days without any stress on shoulders and arms. Compared to some petrol-driven machines, you can actually work twice as long time.
7
Business solutions
To succeed, you need more than first-class machines. Effective commercial lawn and garden requires that you have the right machines that are running as much as possible and that perform optimally. In addition to the most extensive product range on the market, our portfolio therefore also comprises support and services. Learn more about how you can guarantee high productivity and proftability.
fINANCING
AUTHORISED SERVICE
LITERATURE
SELECTED DEALERS
SPARE PARTS SUPPORT
husqvarna.com / uk
Business solutions
1
How do you finance your vehicle fleet? We want you to have access to the machines that match your particular needs. For this to be a reality for you, Husqvarna Fleet Finance is an integral part of our product and service portfolio. Our fnancing solutions vary slightly depending on your location. Check with your local authorised dealer about how you can fnance your next machine purchase.
2
Knowledge that takes you forward.
We offer you and your colleagues opportunities to gain in-depth knowledge in a range of areas as away of achieving greater effciency and proftability. For instance, we share tips for professional users in the form of self-produced professional literature. We have manuals and books about chainsaw cutting, clearing and grass and tree care.
3
Dealers that will help you achieve your goals.
Our dealers are carefully selected to meet challenging criteria. All of our dealers – owners, managers, sales staff and service technicians – receive continuous, relevant training from us, in order to serve you in all situations. Your dealer can advise you on machinery and services to suit your unique business situation, needs and objectives.They will be happy to visit you for product presentations.You also have the option to test drive any machine for a short period that you are interested in.
4
Routine service by specially trained technicians.
All servicing is conducted by authorised technicians at our dealers.They are all specialists trained in the machines you are using. Most workshops have fxed prices for all forms of service. For each machine there is a detailed service plan, which is divided into a number of time intervals. By maintaining your machines continuously, and servicing them at the proposed times you will ensure the machines perform optimally. You minimise the risk of unexpected and costly downtime. And, just as importantly, the machines will last longer and you will enjoy a healthy resale value when the time comes to trade-in to purchase new machines.
5
Quick access to spare parts. Only Husqvarna genuine parts are used at every service.These spare parts are identical to the parts that are in your machine. Through our computerised spare parts system, your dealer can quickly tell you when you will get the parts you need. The most important parts of each machine are always held in stock. You will get these parts the day after you have ordered. Thanks to our express delivery of spare parts, you will lose no valuable production time.
Brushcutters and trimmers
Our brushcutters spare nothing – apart from you. Powerful engines and a rugged design make our brushcutters work colleagues you can rely on. They can withstand demanding use over several years without succumbing to the tall, thick grass and undergrowth. The only things that are spared are your back, shoulders and arms. In addition to a lightweight and well balanced design, the machines have very low vibration levels. Some models are even below the recommended A8-value of 2.5 m/s², which means you can work uninterrupted all day without getting tired or injured.
Vibration level, m/s²
rpm
operating speed We are always running computer simulations to see how we can keep down and shorten inevitable vibration peaks when starting the machine. This is to ensure the machines go down to a low, easily-manageable working speed as quickly as possible.
Key features and benefits of our brushcutters and trimmers: iNCREASED SWEEP DiAmETER mEANS mORE EFFECTiVE WORk
WELL-ADAPTED SHAFT LENGTH CONTRiBUTES TO mORE EFFECTiVE CLEARiNG WORk
ERGONOmiC HARNESS mAkES WORkiNG mORE COmFORTABLE
LARGE FUEL TANk mEANS LONGER PERiODS WiTHOUT REFUELLiNG
imPRESSiVELY LOW ViBRATiONS ENSURE ExTENDED USAGE
HiGH-TECH ENGiNES PROViDE LOW FUEL CONSUmPTiON AND EmiSSiONS
HiGH, ANGLED OFFSET POST PROViDES ENHANCED LEG ROOm WHEN WORkiNG ON SLOPES
LiGHT WEiGHT CONTRiBUTES TO GOOD mANOEUVRABiLiTY AND LESS STRENUOUS WORk
Steady hands when trimming at a high intensity. We design our brushcutters to ensure the vibrations you are exposed to are as low as possible. Some of our machines have the lowest vibrations in their classes. We achieve these low values by, in some cases, isolating the vibrations from two directions. When it comes to our bigger machines, the fuel tank is not integrated into the engine (a solution that we were frst to introduce), but there are two rubber mouldings that serve as vibration-damping elements between the tank and engine. For all machines, we have placed two steel springs in the connection between the suspension and offset post in order to absorb the vibrations from the cutting equipment. These solutions minimise vibrations to your hip and thigh, as well as your hands. It allows you to stay alert and work effciently – and to avoid injury.
EXTREMELy DEMAN
DING CLEARING
All new machines undergo detailed, thorough tests before we add them to the range. We test run them during many hundred hours to ensure that emissions are kept within acceptable limits, and the machines are reliable when it comes to engine performance and drive systems. We also check the strength of the vibration damping elements and that the vibrations do not exceed recommended levels. In addition, all cutting equipment is exposed to testing under extreme conditions to ensure you can handle the demanding clearing of stubborn grass and undergrowth and small trees with ease.
14
Extend the cutting surface without having to move. With our brushcutters you can cut a signifcantly larger area than when using other machines. The explanation for this is the optimised transmission and powerful engine with an impressive development ratio of 1:1.46. Specifcally, at a maximum engine speed of 9.000 rpm, the speed of the output shaft for the trimmer line is as much as 6.164 rpm. This means that the machine has the power to pull round a much longer trimmer line, giving you 31 percent more clearing diameter per revolution.
mORE POWER, LESS FUEL AND EmiSSiONS Our brushcutters are fuel-effcient powerhouses. This is thanks to our patented engine technology X-Torq which provides increased torque over a wider rpm range, with increased power and quicker acceleration as a result. Moreover, by using pure air instead of an air/fuel mix to fush out exhaust fumes, the X-Torq engine consumes up to 20 % less fuel. And exhaust emissions are up to 75 % lower. In addition, X-Torq engines are lightweight and require minimal maintenance.
E EXCEPTIONALLy COMfORTABL
RiGHT ANGLE FOR EFFECTiVE CLEARiNG WORk Our mitre gears are precisely angled to facilitate and improve your grass clearing work. Accurate calculations and empirical studies have shown that an angle of 35 degrees is optimal for people of average height. This angle ensures that the support cup and blade do not hit the ground but glide over the grass and give you the best possible cutting performance into the bargain.
WORK
We want to make your work easier and help you work more effciently. For this reason we have angled the handlebar seven degrees, allowing you to always have the cutting equipment directly in front of you with a minimum of effort. This solution also means that you can make equally large sweeps on both sides of your body. Moreover, our offset posts are extra high. On many machines the handlebar is on a 15-cm high post. As a result, you can work in an upright, comfortable position while enjoying plenty of legroom. Something that you appreciate particularly when working on slopes.
15
HUSQVARNA 555RXT
HUSQVARNA 545RXT / 545RX
Our most powerful machine for the most demanding clearing work. ■■The X-Torq engine technology gives high torque as well
as up to 20 % less fuel consumption and up to 75 % lower exhaust emissions. ■■Effective vibration damping (Low Vib) and comfort handle make for more comfortable working conditions. ■■The ergonomic harness Balance XT™ are included. ■■Smart Start is a function that contributes to quick starts by up to 40 % reduced resistance in the starter cord. ■■The optimized length of transmission tube, and the 35-degree bevel gear facilitate operation and enable the cutting equipment to work parallel to the ground for best result. ■■Angled handlebar and comfort handle ensure a perfect working posture and comfortable grip. ■■High, angled post gives the user generous freedom of movement and leg room, especially on slopes. ■■Well-balanced design thanks to the fuel tank’s placement in front of the engine.
TECHNiCAL SPECiFiCATiONS
■■The X-Torq engine technology gives high torque as well
as up to 20 % less fuel consumption and up to 75 % lower exhaust emissions. ■■Effective vibration damping (Low Vib) and comfort handle make for more comfortable working conditions. ■■The ergonomic harnesses Balance XT™ (for 545RXT) and Balance X™ (545RX) are included. ■■Smart Start is a function that contributes to quick starts by up to 40 % reduced resistance in the starter cord. ■■The optimized length of transmission tube, and the 35-degree bevel gear facilitate operation and enable the cutting equipment to work parallel to the ground for best result. ■■Angled handlebar and comfort handle ensure a perfect working posture and comfortable grip. ■■High, angled post gives the user generous freedom of movement and leg room, especially on slopes. ■■Well-balanced design thanks to the fuel tank’s placement in front of the engine.
545RxT
545Rx
Cylinder displacement, cm≥
53.3
Cylinder displacement, cm≥
45.7
45.7
Power output, kW *
2.8
Power output, kW *
2.1
2.1
2.9 / 2.4
2.9 / 2.4
8.5
8.7
Equivalent vibration level (a hv , eq ) left / right handle, m / s² Weight (excl. cutting equipment), kg * Read more on engine power rating at page 34.
555RxT
Powerful brushcutters that can handle long shifts.
1.5 / 1.6 9.2
TECHNiCAL SPECiFiCATiONS
Equivalent vibration level (a hv , eq ) left / right handle, m / s² Weight (excl. cutting equipment), kg * Read more on engine power rating at page 34.
ERGONOMIC S HARNESSE The X-Torq engine technology gives extra torque, up to 20 % less fuel consumption and up to 75 % lower exhaust emissions.
16
Low Vib effectively reduces vibrations in the handles, which relieves the stress on the arms and hands of the user.
The brushcutters have ergonomic harnesses with wide shoulder straps and strain relieving waist belts.
HUSQVARNA 535RXT / 535RX
HUSQVARNA 327RX
Productive, reliable and comfortable brushcutters.
Lightweight brushcutters for long shifts at a high tempo.
■■The X-Torq engine technology gives high torque as well
■■Effective vibration damping (Low Vib) and comfort handle
as up to 20 % less fuel consumption and up to 75 % lower exhaust emissions. ■■Effective vibration damping (Low Vib) and comfort handle gives a more comfortable working conditions. ■■Ergonomic harness included. ■■The 35-degree bevel gear means the cutting equipment works parallel to the ground. ■■Angled handlebar and comfort handle ensure a perfect working posture and comfortable grip. ■■High, angled post gives the user generous freedom of movement and leg room, especially on slopes. ■■Fuel pump makes machine easy to start.
gives a more comfortable working conditions. ■■Ergonomic harness included. ■■Smart Start is a function that contributes to quick starts by up
to 40 % reduced resistance in the starter cord. ■■The 35-degree bevel gear means the cutting equipment works
parallel to the ground. ■■Angled handlebar and comfort handle ensure a perfect working posture and comfortable grip. ■■High, angled post gives the user generous freedom of movement and leg room, especially on slopes. ■■Fuel pump makes machine easy to start. Not available in UK.
TECHNiCAL SPECiFiCATiONS
535RxT
535Rx
Cylinder displacement, cm≥
34.6
34.6
Cylinder displacement, cm≥
Power output, kW *
1.6
1.6
Power output, kW *
2.5 / 2.7
3.4 / 4.1
6.2
6.1
Equivalent vibration level (a hv , eq ) left / right handle, m / s² Weight (excl. cutting equipment), kg * Read more on engine power rating at page 34.
The high offset post produces a raised position and increased legroom when working on slopes.
TECHNiCAL SPECiFiCATiONS
327Rx
24.5 0.9
Equivalent vibration level (a hv , eq ) left / right handle, m / s² Weight (excl. cutting equipment), kg
2.4 / 1.9 5.4
* Read more on engine power rating at page 34.
The combi-guard can be used together with both grass blade and trimmer head.
Smart Start means that the traction in the starter cord is reduced by up to 40 %, which makes the brushcutter easy to start.
17
18
HUSQVARNA 324RX
HUSQVARNA 553RBX
Machine for both fine trimming and clearing of long grass.
Back-mounted machine which facilitates work on slopes.
■■Fitted with 4 stroke engine which runs exclusively on petrol.
■■The X-Torq engine technology gives high torque as well as up
■■Combi guard for both trimmer heads and grass blades included.
to 20 % less fuel consumption and up to 75 % lower exhaust emissions. ■■Transmission and bevel gear in proven design together with a sturdy trimmer head means trouble free work. ■■The comfortable loop handle can easily be pivoted to enable operation in different angles. ■■Flexible connection between harness and engine increases freedom of movement for hips, and allows a better working posture on slopes and uneven terrain. ■■The combi-guard can be used together with both grass blade and trimmer head. ■■Includes ergonomic harness with angled back support and padded shoulder straps. ■■Fuel pump makes machine easy to start.
■■Smart Start is a function that contributes to quick starts by up
to 40 % reduced resistance in the starter cord. ■■Balance 35 harness included. ■■The 35-degree bevel gear means the cutting equipment works parallel to the ground for best result. ■■Fuel pump makes machine easy to start. Not available in UK.
TECHNiCAL SPECiFiCATiONS
324Rx
TECHNiCAL SPECiFiCATiONS
Cylinder displacement, cm≥
25
Cylinder displacement, cm≥
Power output, kW *
0.8
Power output, kW *
Equivalent vibration level (a hv , eq ) left / right handle, m / s² Weight (excl. cutting equipment), kg * Read more on engine power rating at page 34.
The combi guard can be used together with both grass blade and trimmer head.
2.7 / 2.2 5.5
553RBx
50.6 2.3
Equivalent vibration level (a hv , eq ) left / right handle, m / s² Weight (excl. cutting equipment), kg
2.7 / 3.8 12.1
* Read more on engine power rating at page 34.
Transmission and bevel gear in proven design together with a sturdy trimmer head for trouble free work.
The specially developed harness has padded shoulder straps and is angled in toward the back for better support.
19
HUSQVARNA 327LDX
HEDGE TRIMMERS Straight edges are now within reach. Available in two lengths for different cutting situations.
Robust, lightweight and highly versatile trimmer. ■■Smart Start means that the traction in the starter cord is reduced
by up to 40 %, which makes the trimmers easy to start. ■■Accessories for grass trimming, hedge trimming, tree pruning,
sweeping, cultivating and edging. ■■A two-part shaft facilitates transport and storage. ■■Fuel pump makes machine easy to start. ■■The comfortable loop handle is easy to pivot, for operation at different angles. Not available in UK.
TECHNiCAL SPECiFiCATiONS
Cylinder displacement, cm≥ Power output, kW * Equivalent vibration level (a hv , eq ) left / right handle, m / s² Weight (excl. cutting equipment), kg * Read more on engine power rating at page 34.
POLE SAW Gives extra reach when needed. Cuts branches up to approximately 15 cm in thickness.
CULTIVATOR Ideal on delicate flowerbeds and around the base of trees. 327LDx
24.5 0.9 2.9 / 3.4 5.1
EDGER Keeps lawns, pathways and flowerbeds looking good with straight neat edging.
SWEEPER Large capacity rubber broom attachment gives sweeping action without marking. Width 60 cm.
The trimmer is easy to store and transport thanks to the two part shaft.
20
The comfortable loop handle is easy to pivot, for operation at different angles.
Smart Start means that the traction in the starter cord is reduced by up to 40 %, which makes the brushcutter easy to start.
COmBi-ACCESSORiES LD
21
22
HUSQVARNA 327RDX
Effective, lightweight machine for a variety of clearing tasks. ■■Click-on attachments with trimmer head, grass blade and saw
blade are available. ■■Effective vibration damping (Low Vib) and comfort handle gives a more comfortable working conditions. ■■Ergonomic harness included. ■■Smart Start is a function that contributes to quick starts by up to 40 % reduced resistance in the starter cord. ■■A two-part shaft facilitates transport and storage. ■■The 35-degree bevel gear means the cutting equipment works parallel to the ground. ■■Angled handlebar and comfort handle ensure a perfect working posture and comfortable grip. ■■High, angled post gives the user generous freedom of movement and leg room, especially on slopes. ■■Fuel pump makes machine easy to start. Not available in UK.
TECHNiCAL SPECiFiCATiONS
Cylinder displacement, cm≥ Power output, kW * Equivalent vibration level (a hv , eq ) left / right handle, m / s² Weight (excl. cutting equipment), kg
TA 850 For normal grass trimming. Kit consisting shaft, guard and trimmer head T35.
BCA 850-24 For clearing higher grass. Kit consisting shaft, gear guard and grass blade Multi 255-4 including support cup.
CSA 850-24 For clearing bushes and smaller trees. Kit consisting shaft, guard and saw blade Scarlett 200–22.
327RDx
24.5 0.9 2.9 / 3.4 5.6
* Read more on engine power rating at page 34.
COMBI- G
The high offset post produces a raised position and increased legroom when working on slopes.
Smart Start means that the traction in the starter cord is reduced by up to 40 %, which makes the brushcutter easy to start.
UARD
The combi-guard can be used together with both grass blade and trimmer head.
23
HUSQVARNA 336RK
HUSQVARNA 543RBK
Robust, reliable and versatile brushcutter. ■■Click-on attachments with trimmer head, grass blade and saw
blade are available. ■■The X-Torq engine technology gives high torque as well as up
to 20 % less fuel consumption and up to 75 % lower exhaust emissions. ■■The 35-degree bevel gear means the cutting equipment works parallel to the ground for best result. ■■The combi-guard can be used together with both grass blade and trimmer head. ■■Angled handlebar and comfort handle ensure a perfect working posture and comfortable grip. ■■Fuel pump makes machine easy to start. ■■A two-part shaft facilitates transport and storage. ■■Balance 35 harness is included. Not available in UK.
Back-mounted, powerful machine for a range of clearing work. ■■Click-on attachments with trimmer head, grass blade and saw
blade are available. ■■The X-Torq engine technology gives high torque as well as up
to 20 % less fuel consumption and up to 75 % lower exhaust emissions. ■■Transmission and bevel gear in proven design together with a sturdy trimmer head means trouble free work. ■■The comfortable loop handle can easily be pivoted to enable operation in different angles. ■■Flexible connection between harness and engine increases freedom of movement for hips, and allows a better working posture on slopes and uneven terrain. ■■The combi-guard can be used together with both grass blade and trimmer head. ■■Includes ergonomic harness with angled back support and padded shoulder straps. ■■Fuel pump makes machine easy to start. Not available in UK.
TECHNiCAL SPECiFiCATiONS
TECHNiCAL SPECiFiCATiONS
543RBk
34.6
Cylinder displacement, cm≥
Power output, kW *
1.4
Power output, kW *
1.5
Equivalent vibration level (a hv , eq ) left / right handle, m / s²
N /A
Weight (excl. cutting equipment), kg
10.6
Equivalent vibration level (a hv , eq ) left / right handle, m / s² Weight (excl. cutting equipment), kg * Read more on engine power rating at page 34.
The X-Torq engine technology gives high torque as well as up to 20 % less fuel consumption and up to 75 % lower exhaust emissions.
24
336Rk
Cylinder displacement, cm≥
4.3 / 2.9 7.4
40.1
* Read more on engine power rating at page 34.
Transmission and bevel gear in proven design together with a sturdy trimmer head for trouble free work.
The specially developed harness has padded shoulder straps and is angled in toward the back for better support.
Combi attachments for RK/RBK-machines.
GTA 850-28 For normal grass trimming. Kit consisting shaft, guard and trimmer head T35.
BCA 850-28 For clearing higher grass. Kit consisting shaft, gear guard and grass blade Multi 300–3 including support cup.
CSA 850-28 For clearing bushes and smaller trees. Kit consisting shaft, guard and saw blade Scarlett 200–22 (not available for 543RBK).
25
HUSQVARNA 536LiL
HUSQVARNA 536LiR
Effective and comfortable battery-powered trimmer.
Powerful, lightweight battery machine for demanding clearing work.
■■Husqvarna-developed, brushless engine provides great power
■■Husqvarna-developed, brushless engine provides great power
for best brushcutting performance in tough conditions. ■■Powerful Li-ion battery delivers performance that is second to none. ■■Economy mode with savE™ contributes to longer working hours without having to change the battery. ■■Intuitive keypad makes it easy to start and stop the machine. ■■Two-way rotation of the trimmer means less grass on walkways. ■■Twin line cutting system with Tap‘n Go function for quick and easy line feed.
TECHNICAL SPECIFICATIONS
Battery voltage,V Equivalent vibration level (a hv , eq ) front / rear handle, m / s² Weight with battery, kg
The trimmer head can rotate to the left and to the right, which allows you to avoid grass on walkways.
26
536LiL
36 1.7 / 0.5 4.3
for best brushcutting performance in tough conditions. ■■Powerful Li-ion battery delivers performance that is second
to none. ■■Economy mode with savE™ contributes to longer working hours without having to change the battery. ■■Intuitive keypad makes it easy to start and stop the machine. ■■Two-way rotation of the trimmer means less grass on walkways. ■■Twin line cutting system with Tap‘n Go function for quick and easy line feed. ■■High, angled post and handle bar gives generous freedom of movement and legroom, especially on slopes. ■■ Padded, comfortable harness is included.
TECHNICAL SPECIFICATIONS
Battery voltage,V
36
Equivalent vibration level (a hv , eq ) front / rear handle, m / s² Weight with battery, kg
Economy mode savE™ means maximum runtime without having to change battery.
536LiR
2.6 / 2.1 5.1
The powerful, Husqvarna-developed, engine gives great brushcutting performance in tough conditions.
Accessories for battery trimmers. N ew ! LI-ION BACKPACK BATTERy
Robust and powerful, as well as ergonomic and adjustable backpack battery that allows you to work continuously up to a whole day.
LI-ION BATTERy
Li-ion batteries deliver unsurpassed, long-lasting power and performance. The batteries come in a range of capacities: BLi 80 (2.1Ah) and BLi 150 (4.2 Ah).
CHARGER
It takes approximately 35 minutes to charge a battery. This means that if you have two batteries, you’re able to work nonstop since the charging time is shorter than the usual working time.
N ew !
BLi BATTERy BAG
Keeps batteries warm even during winter for longest possible runtime. Effectively absorbs shocks and protects against dirt, grime and moisture. Can be attached to the belt. Suitable for BLi 60, BLi 80, BLi 110 and BLi 150 batteries.
COMfORTABLE HARNESS
Padded harness for convenient work (is included to 536LiR). 27
Our ergonomic harnesses spread the load and help you move in the right manner. A harness will improve working movement, enable you to manage your job in a safer way and take the strain from your body. That’s why we have spent time researching and developing harnesses to help you get the most out of your machine. Using a machine the right way also makes a difference to how it handles, and the results you experience.
Wide ventilated back plate.
28
Our ergonomically designed harnesses effectively spread the machine’s weight to maximise balance, making the machine feel lighter, and manouverable and less strenuous to work with. For more information, visit our website. You’ll fnd comparison charts, videos and our full range of harnesses.
Settings over and under the chest to fit both men and women.
Weight distribution from shoulders to hips.
Balance XTª.
Balance Xª.
Balance 55 / Balance 35.
Our most advanced harness with several unique features such as settings for men and women, and a pivoting shoulder section. Gives you an outstanding weight distribution between the shoulders, between the chest and back. Also, it distributes load from the shoulders to the hips.
Delivers great relief to your upper body and arms thanks to outstanding weight distribution between the shoulders, between the chest and back, and from the shoulders to hips.
Ergonomic harnesses that distribute the load optimally between your shoulders, chest and back.
BALANCE xT™
BALANCE x™
BALANCE 55 / 35
Wide, ventilated back plate Quick set adjustment points Padded, ergonomics straps Shock-absorbing hip pad
/―
Flexible hip pad suspension
―
Wide, supporting hip belt
―
Quick release on hip pad
― ―
Grass and forest mode Height adjustable back plate
―
―
Flexible shoulder section
―
―
Special setting for women
―
―
= Available
― = Not available
Flexible shoulder section and individual height adjustment.
Shock-absorbing, travelling hip pad.
Easy-access quick release in case of an emergency.
29
CUTTiNG EQUiPmENT GUiDE mODEL
GRASS
536LiL / 536LiR 129C 128C 128L * 323L * / 327LS * / 224L * / 326LS * 122LD 129Lk 324LDx * / 525Lk 535LS * 129RJ 233RJ * / 525RJx 535RJ 129R 323R * / 323Rii * / 324Rx * / 533RS * / 327Rx / 133R * / 226R * 327RDx 535Rx * / 535RxT / 336FR * / 235R * / 135R 336Rk * 345FR / 545Rx / 545RxT 555RxT 545Fx * / 545FxT * 345FR * / 555FxT * 555FRm * 143R * / 153R * / 143Rii / 236R * / 543RS * / 553RS * 243RJ * / 253RJ * / 543RBk * / 553RBx
TRimmER GUARDS
545 03 11-01
503 97 71-01
503 95 43-01
537 29 73-01
537 34 94-03
544 10 74-02
502 46 50-01
SAW BLADE GUARDS
537 29 95-01
537 04 85-01
200 mm (adapter incl.)
incl. B1
577 01 83-01
* Not available in UK.
30
F1
537 04 85-02 incl. B1
537 21 71-01
952 71 56-16
200 mm
incl. F1 21
502 03 94-06
952 71 56-15
225 mm
incl. F1 21 (USA)
501 32 04-02
537 04 85-04
200 mm (adapter incl.)
incl. F1 21 (USA)
502 43 55-01
544 24 96-01
225 mm (adapter incl.)
incl. B3
F4
21
531 00 77-01
(USA)
502 12 26-01
BLADE GUARDS
SUPPORT CUPS
537 28 85-01
503 89 01-01
502 14 55-01
537 29 74-01
200 mm
537 33 16-01
503 90 18-02 (20 mm / 1")
544 02 65-02
502 15 70-02 M12 (20 mm / 1") Ballbearing
21
544 24 96-02 F4
PLANT PROT. GUARDS 255 mm
537 31 09-02
F1
503 93 42-02
21
200 mm (adapter incl.)
incl. B3
574 47 95-01
COmBiNATiON GUARDS
kiTS
21
(USA)
545 03 09-01
544 16 03-01
503 89 01-02 M12
544 46 43-01
502 46 49-01
COARSE GRASS
BUSHES AND TREES
ATTACHmENTS
CUTTiNG EQUiPmENTS
537 18 33-11*
537 35 35-01
575 98 98-01
Saw head
TA850
Alloy
537 18 33-16
537 42 54-01
578 44 60-01
PA1100
CA150
T25 (R)
537 19 67-01*
967 11 31-01*
578 44 61-01
SR600
GTA 850-28
T25 (L)
537 19 69-01
967 02 67-01*
578 44 59-01
EA850
BCA 850-28
T25C (R)
967 02 69-01*
578 44 74-01
CSA 850-28
S35 M10
952 71 19-11*
578 44 63-01
BAC
T35 M10
967 18 59-01*
578 44 65-01
BCA 850-24
T35X M10
SII M12
Multi 330-2 (1")
967 18 60-01*
578 44 71-01
578 44 91-01
578 44 25-01
CSA 850-24
Superauto II M10 (1")
TriCut M10
Scarlett 200-22 (1")
578 44 93-01
578 44 27-01
TriCut M12
Scarlett 225-24 (1")
537 19 66-05
(Articulated)
HA110
537 19 66-06
(Articulated)
HA850
952 71 19-21* HAC
(Fixed)
578 44 76-01
(Fixed)
T35 M12
(Semiauto)
T35X M12 (Semiauto)
578 44 80-01*
(Semiauto)
578 44 68-01
(Fixed)
578 44 70-01
(Semiauto)
(Semiauto)
(Semiauto)
(Manual)
(Semiauto)
578 44 81-01*
578 44 49-01 Multi 255-3 (1")
(Semiauto)
T55X M12 (Manual)
578 44 37-01 Grass 255-4 (1")
T45X M12 (Semiauto)
578 44 40-01 Grass 255-8 (1")
F35 M12
S35 M12
578 44 64-01
578 44 66-01
578 44 47-01 Multi 275-4 (1")
(Fixed)
578 44 44-01
F55 M12
Multi 350-3 (1")
578 44 72-01*
578 44 45-01
Auto 55 M12 (1")
Multi 300-3 (1")
578 44 78-01
579 29 40-01 T25B
(Manual)
(Semiauto)
578 44 51-01
522 96 51-01* Shredder blade (1")
* Not available in UK.
31
ACCESSORiES BRUSCHCUTTERS AND TRimmERS
N ew !
N ew !
N ew !
ALL-WEATHER JACKET, TECHNICAL, WITH GORE-TEX速 LAMINATE
BRUSHCUTTING- AND TRIMMER JACKET, TECHNICAL
Jacket made of high quality fabric with reinforcements on extra exposed areas. GORE-TEX速 laminate provides excellent protection against rain and wind. Breathable fabric, ventilation zippers under the arms and ventilation yoke on the back keep you comfortable at all times. Pockets with zippers are easy to reach and the extended back part prevents a gap between jacket and trousers. The jacket has pre-bent arms for great movability and refective logos for good visibility. 580 68 80-xx. Not available in UK.
Designed for long hours of convenient work. Pre-bent sleeves and extended back part contribute to superior comfort. The jacket has pockets for extra padding on the shoulders to relieve stress and soreness. Four chest pockets and one low front pocket are easy to reach even when wearing a harness. Reinforcement on extra exposed areas ensures high durability. Ventilation zippers under the arms and ventilation yoke on the back provide a comfortable temperature. Refective logos and refective tape ensure good visibility. 580 68 82-xx
ALL-WEATHER TROUSERS,TECHNICAL, WITH GORE-TEX速 LAMINATE 速
High quality, durable trousers with GORE-TEX laminate for superb protection against rain and wind. Breathable fabric keeps you comfortable and reinforcements on extra exposed areas enable you to work in demanding environments. Pre-bent knees provide excellent ergonomics and refective tape and logos ensure good visibility. 580 68 79-xx. Not available in UK.
BRUSHCUTTING- AND TRIMMER TROUSERS, TECHNICAL
Made of specially treated fabric. The legs are water repellent and have pre-bent knees, extra padding on the front and ventilation zippers at the back for good protection and comfort. Hip pocket for extra padding relieves stress and soreness. Refective logos and refective tape ensure good visibility. 580 68 81-xx
More than a fuel can.
JACKET, TECHNICAL HIGH VIz
High visibility jacket with tight ft and twoway stretch material that allows you to work comfortably at all times. Ventilation zippers under the arms and open yoke on the back keeps you cool even during demanding work and hot days. The jacket has two chest pockets. With elastic drawstring adjusts both the waist and bottom of the jacket with ease. The high visibility jacket is tested and approved according to EN 471:2004 and A1 2007 (class 3). 585 12 78-xx Not available in UK.
GLOVES, CLASSIC LIGHT
Slim, comfortable gloves with goat leather palms (to withstand moisture) and strong jersey fabric on the backsides. The fngers are reinforced for extra durability. 579 38 00-xx
N ew !
Our redesigned Combi Can enables you to refuel quickly without splash effects and any waste. In addition, we have adjusted the sizes of the two containers to achieve an optimised fuel and chain oil ratio (5.0/2.5 litres). Also, the new Combi Can has improved compartments for tools and frequently needed spare parts, which allows you to keep on working.
The spouts are designed for an optimised, constant flow that speeds up refuelling.
32
A mechanical lock prevents leakage and an auto-stop prevents spill and flooded tanks.
The two compartments allow you to bring tools such as files, and spare parts such as chains.
HUSQVARNA TWO-STROKE OIL, XP ® SyNTHETIC
Fully synthetic, biodegradable oil that gives low smoke and contains the highest quality additives. Developed for tough, professional use with high loads and engine speeds. It’s excellent for all our machines, especially for engines with a cylinder volume over 55 cm³. Fulfls the requirements of JASO / FB / ISO EGB and Rotax 253 snowmobile test. 1 litre dosage 578 03 70-03. 4 litre 578 03 71-03, 0,1 litre 578 18 03-03. HUSQVARNA TWO-STROKE OIL, LS+
Made of a mix of mineral and synthetic oils to give very low smoke emissions. It’s best used for our chainsaws and clearing saws with a cylinder volume under 55 cm³. Fulfls the requirements of JASO FD / ISO EGD and Rotax 253 snowmobile test. 1 litre dosage 578 03 70-02, 4 litre 578 03 71-02, 0,1 litre 578 18 03-02.
TWO-STROKE OIL COMPARISON A laboratory test made with a Husqvarna 346 XP® under very heavy load clearly showed the difference between reference oil and our 2-stroke oils. Cylinder and piston comparison ran under the same circumstances but with different engine oil. The cylinder ran on the same engine block. The result was that our oils give better protection against lean and carbon related piston seizures.
Husqvarna oils have been proven to leave less deposits on the pistons. Reducing damage at high temperatures. PROTECTIVE BOOTS, TECHNICAL
Made of high quality leather and nylon mesh. Composite toecaps make the boots lightweight. They are 100 % waterproof yet breathable thanks to Sympatex® membrane. Front parts offer extra rubber protection. Perfect for both garden work and leisure. 575 35 47-xx
PROTECTIVE BOOTS, fUNCTIONAL 28
Handmade with saw protection, extra reinforced upper with deep lacing, steel toecap and reinforcement around the stud-ready sole. Have canvas lining, deep rear lacing, gripping points on the legs and heel caps that make it easier to put on and take off the boots. 573 95 59-xx
Regular 2-stroke oils leave depositis on the pistons causing damage at high temperatures.
Oils that give good performance.
HEARING PROTECTION
Comfortable design. Offer the possibility to adjust the pressure by 20 %. Feature a cover between the visor and headband, protecting your head from grass and rain. Can also be ftted with a sun peak. With perspex visor 505 66 53-48. With mesh visor 505 66 53-58.
HEARING PROTECTION WITH fM RADIO
Has a new headband that gives less pressure on the ears and earmuffs designed to ft all users. It also has improved attenuation and sound quality. FM radio and 3.5mm (AUX) for mp3 or communication radio are included. Headband 578 27 49-01. Helmet based 578 27 49-02.
The Husqvarna crown on the cap ensures that the product is authentic, and that it will deliver the protection and lubrication promised by Husqvarna.
PROTECTIVE GLASSES
Can be worn under a visor or on their own. Yellow tinted lenses (544 96 37-02) give improved vision in dark conditions. Grey tinted lenses (544 96 37-03) with UV protection improve vision in sunny conditions. Goggles (544 96 39-01) developed for people who wear eyeglasses, anti-fog treated and durable against impact. Clear 544 96 37-01.
The oils are developed, and continually tested, to keep the right temperature and to ensure that your engine gets the lubrication needed. 33
TECHNiCAL SPECiFiCATiONS FOR BRUSHCUTTERS AND TRimmERS
555RxT
545RxT
545Rx
535RxT
Cylinder displacement, cm≥
53.3
45.7
45.7
34.6
Power output, kW
2.8
2.1
2.1
1.6
Sound pressure level at operators ear, dB(A) *
101
100
101
96
Guaranteed sound power level, LWA dB(A)* *
121
117
117
111
1.5 / 1.6
2.9 / 2.4
2.9 / 2.4
2.5 / 2.7
9000
9000
9000
8400
Fuel tank volume, litres
1.1
0.9
0.9
0.6
Fuel consumption (g / KWh)
510
450
450
480
Idling speed, rpm
2800
2700
2700
2900
Exhaust emissions (Co average), g / kWh
350
380
380
196
Exhaust emissions (HC average), g / kWh
61
47
47
32
Exhaust emissions (Nox average), g / kWh
2.4
1
1
2
1:1.47
1:1.4
1:1.4
1:1.4
Equivalent vibration level (a hv , eq ) left / right handle, m / s² * ** Maximum power speed, rpm
Gear ratio Drive gear angle oEM Trimmer head
35
35
35
35
T55X M12
T45X M12
T45X M12
T35X M12
oEM Grass blade
Multi 350-3
Multi 300-3
Multi 300-3
Multi 300-3
oEM Harness
Balance XT™
Balance XT™
Balance X™
Balance X™
Weight (excl. cutting equipment), kg
9.2
8.5
8.7
6.2
Tube diameter, mm
35
32
32
28
― = Not available * Equivalent sound pressure level at the operator’s ear, measured according to EN ISO 11806 and ISO 22868, dB(A). Reported data for equivalent sound pressure level for the machine has a typical statistical dispersion (standard deviation) of 1 dB(A). ** Noise emissions in the environment measured as sound power (LWA) in conformity with EC directive 2000/14/EC. Reported sound power level for the machine has been measured with the original cutting attachment that gives the highest level. The guaranteed sound power level includes variation in production as well as variation from the test code with 1 Ð 3 dB(A). *** Equivalent vibration levels (ahv,eq) at handles, measured according to EN ISO 11806 and ISO 22867, m/s². Reported data for equivalent vibration level has a typical statistical dispersion (standard deviation) of 1 m/s².
TECHNiCAL SPECiFiCATiONS FOR BATTERY TRimmERS 536LiL
536LiR
Battery voltage,V
36
36
Weight with battery, kg
4.3
5.1
Weight without battery, kg Motor type Typical battery charging time to 80 / 100%, min
3
3.8
BLDC (brushless)
BLDC (brushless)
25 / 35
25 / 35
Battery runtime (free run) with savEª activated, min
60
60
Sound pressure level at operators ear, dB(A) *
81
76
1.7 / 0.5
2.6 / 2.1
Equivalent vibration level (a hv , eq) front / rear handle, m / s² * *
* Equivalent sound pressure level at the operatorÕs ear, measured according to EN ISO 11806 and ISO 22868, dB(A). Reported data for equivalent sound pressure level for the machine has a typical statistical dispersion (standard deviation) of 1 dB(A). ** Equivalent vibration levels (ahv,eq) at handles, measured according to EN ISO 11806 and ISO 22867, m/s². Reported data for equivalent vibration level has a typical statistical dispersion (standard deviation) of 1 m/s².
NOmiNAL POWER A new machinery directive (2006 / 42 / EC) came into force on January 1, 2010, requiring manufacturers to declare the nominal power of engines, in kilowatts (kW). The power rating of the engines indicated is the average net power output during a normal working situations and fulflling applicable noise regulations (at specifed rpm, see owners manual) of a typical production engine for the engine model measured to SAE standard J 1349 / ISO 1585. Mass production engines may differ from this value. Actual power output for the engine installed in the fnal machine will depend on the operating speed, environmental conditions and other variables.
34
Not available in UK.
Not available in UK.
Not available in UK.
Not available in UK.
Not available in UK.
Not available in UK.
535Rx
327Rx
324Rx
327LDx
327RDx
336Rk
34.6
24.5
25
24.5
24.5
34.6
1.6
0.9
0.8
0.9
0.9
1.4
95
95
89
94
94
98
114
110
106
109
109
113
3.4 / 4.1
2.4 / 1.9
2.7 / 2.2
2.9 / 3.4
2.9 / 3.4
4.3 / 2.9
8400
8400
7000
8400
8400
8400
0.6
0.5
0.5
0.5
0.5
0.6
480
550
510
550
550
435
2900
2700
3100
2700
2700
2900
196
153
399
153
153
301
32
29
15
29
29
33
2
2.9
3.3
2.9
2.9
1.4
1:1.4
1:1.46
1:1.46
1:1.46
1:1.46
1:1.4
35
30
30
30
30
35
T35 M12
T35 M10
T35 M10
T35 M10
T35X M12
Multi 300-3
Grass 255-4
Grass 255-4
T35 M10 ―
Grass 255-4
Multi 300-3
Balance 35
Balance 35
Balance 35
―
Balance 35
Balance 35
6.1
5.4
5.5
5.1
5.1
7.4
28
24
24
24
24
28
TECHNiCAL SPECiFiCATiONS FOR BACkPACk BRUSHCUTTERS
Not available in UK. 553RBx
543RBk
50.6
40.1
Cylinder bore, mm
45
40.5
Cylinder stroke, mm
31
31
Power output, kW
2.3
1.5
Cylinder displacement, cm≥
Sound pressure level at operators ear, dB(A) *
97
95
Guaranteed sound power level, LWA dB(A)* *
118
118
Equivalent vibration level (a hv , eq ) left / right handle, m / s² * ** Maximum power speed, rpm
2.7 / 3.8
N /A
9500
8500
Maximum recommended engine speed, rpm
13000
12000
Carburettor
Walbro
Walbro
Fuel tank volume, litres
0.8
0.75
Fuel consumption (g / KWh)
449
449
Walbro
Walbro
Idling speed, rpm
2800
3000
Exhaust emissions (Co average), g / kWh
319
―
Exhaust emissions (HC average), g / kWh
110
―
Exhaust emissions (Nox average), g / kWh
1.6
―
1:1.4
1:1.4
Ignition system
Gear ratio Drive gear angle
30
35
oEM Trimmer head
T45X M12
T45X M12
oEM Grass blade
Multi 275-4
Multi 275-4
oEM Harness
Integrated
Integrated
Weight (excl. cutting equipment), kg
12.1
10.6
Tube length, mm
1483
1483
Tube diameter, mm
28.05
28.05
― = Not available * Equivalent sound pressure level at the operator’s ear, measured according to EN ISO 11806 and ISO 22868, dB(A). Reported data for equivalent sound pressure level for the machine has a typical statistical dispersion (standard deviation) of 1 dB(A). ** Noise emissions in the environment measured as sound power (LWA) in conformity with EC directive 2000/14/EC. Reported sound power level for the machine has been measured with the original cutting attachment that gives the highest level. The guaranteed sound power level includes variation in production as well as variation from the test code with 1 – 3 dB(A). *** Equivalent vibration levels (ahv,eq) at handles, measured according to EN ISO 11806 and ISO 22867, m/s2. Reported data for equivalent vibration level has a typical statistical dispersion (standard deviation) of 1 m/s².
35
Hedge trimmers
Challenging hedge trimming has never been easier. Everything we do is about making your work easier. This is particularly evident in the development of our hedge trimmers. They are robust and powerful yet at the same time lightweight and well-balanced work companions. Crammed with ergonomic solutions and smart features (such as rotating handles and remotely operated angling of the cutting deck) that allow you to work quickly and effciently in even the most demanding situations.
our anti-vibration system Low Vib keeps you alert and productive – even during extended use. Between the engine body and handle mount, carefully tested damping elements are installed that are made up of steel springs or rubber mouldings (depending on model) that effectively absorb vibrations from the engine, transmission and cutting equipment. This minimises vibration in the handles, which helps protect your arms and hands.
Tough gear design for extended operation. Our machines are built for many years of trouble-free work. Gear housings and covers are made of high-graded, lightweight aluminium and magnesium. High-precision machined gear wheels ensure reliable operation. The crankshaft is stably integrated into the gear housing to ensure long life. Connecting rods with needle bearings and sealed, permanently greased bearings means easy maintenance and extended service intervals. And specially developed seals effciently prevent dust and dirt from getting into gears.
ExTREmELY SHARP AND HiGH-SPEED kNiVES The design of the cutting blades and knives make you work efficiently in all situations. The two blades are very sharp and supported by a solid steel rod which provides excellent rigidity and durability. We’ve also managed to create optimised cutting angles. In addition to this, many of our machines offer impressively high knife speed. And thanks to big teeth openings it’s possible to cut thick branches.
SS fUEL A MORE POWER, LE
ND EMISSIONS
Many of the hedge trimmers have our patented engine technology X-Torq. This means that the engines deliver extra torque over a wider rpm range, which gives the machines extra power and more rapid acceleration for effcient hedge trimming. The X-Torq engines uses pure air instead of a mix of air and fuel to scavenge the exhaust fumes. Resulting in up to 20 % less fuel consumption and gives up to 75 % lower exhaust emissions.
HUSQVARNA 226HS99S / 226HS75S
Robust, well balanced and productive machines.
Makes it easy to cut vertically and horizontally.
■■The X-Torq engine technology gives a high torque and up to
■■The X-Torq engine technology gives a high torque and up to
20 % less fuel consumption as well as up to 75 % lower fuel exhaust emissions. ■■Robust gear housing, hard-wearing gear components and top-calibre blade assembly make for long durability in tough working conditions.
20 % less fuel consumption as well as up to 75 % lower fuel exhaust emissions. ■■Robust gear housing, hard-wearing gear components and top-calibre blade assembly make for long durability in tough working conditions. ■■The rear handle can be angled, for easier vertical and horizontal trimming.
TECHNICAL SPECIFICATIONS
226HS99S
226HS75S
Displacement, cm³
23.6
23.6
Displacement, cm³
23.6
23.6
Power, kW *
0.85
0.85
Power, kW *
0.85
0.85
Knife length, mm Equivalent vibration level (a hv , eq ) front / rear handle, m / s² Weight, kg * Read more on engine power rating at page 42.
The X-Torq engine technology gives high torque as well as up to 20 % less fuel consumption and up to 75 % lower exhaust emissions.
38
HUSQVARNA 226HD75S / 226HD60S
108
75
5.6 / 3.3
7.7 / 3.2
6.1
5.8
TECHNICAL SPECIFICATIONS
Knife length, mm Equivalent vibration level (a hv , eq ) front / rear handle, m / s² Weight, kg
226HD75S 226HD60S
75
60
2.5 / 2.1
1.8 / 1.5
6.0
5.8
* Read more on engine power rating at page 42.
Effective vibration damping (Low Vib) in the handles relieves the stress on the arms and hands for more convenient work.
The hedge trimmers have hardened steel blades, which stay shaper longer and ensures durability.
HUSQVARNA 536LiHD60X
HUSQVARNA 536LiHD70X
N ew !
Strong, lightweight and sustained battery machine.
Powerful battery machine that gives you extra reach.
■■New, high-performance and long lasting 4-brushed motor
■■New, high-performance and long lasting 4-brushed motor
for great reliability. ■■New, more powerful battery pack gives an extended run time. ■■Economy mode savEª contributes to maximum operational time. ■■60 cm long high-speed blade for demanding professional use. ■■The rear handle can be angled for easier vertical and horizontal trimming. ■■Lightweight, balanced design facilitates efficient work even during long shifts. ■■No emissions, low noise and vibrations means best possible working conditions.
for great reliability. ■■New, more powerful battery pack gives an extended run time. ■■Economy mode savEª contributes to maximum operational time. ■■70 cm long high-speed blade for demanding professional use. ■■The rear handle can be angled for easier vertical and horizontal
trimming. ■■Lightweight, balanced design facilitates efficient work even
during long shifts. ■■No emissions, low noise and vibrations means best possible working conditions. Not available in UK.
TECHNICAL SPECIFICATIONS
Battery voltage,V Equivalent vibration level (a hv , eq ) front / rear handle, m / s² Weight with battery, kg
The newly developed 4-brushed motor gives you great, long lasting performance.
536LiHD60X
36 1,3 / 1,1 5,0
TECHNICAL SPECIFICATIONS
Battery voltage,V
36
Equivalent vibration level (a hv , eq ) front / rear handle, m / s² Weight with battery, kg
The ergonomic rear handle is pivoted to get the most comfortable and less strained working position.
536LiHD70X
2,4 / 2,1 5,1
Low noise and vibrations means less disturbing and tiring work even during long shifts.
39
The cutter bar can be folded to facilitate transport and storage (goes for the model 327HE4X).
40
Smart Start facilitates starting by reducing the resistance of the starter cord by up to 40% (applies to 327HDA65X, 327HE3X, 327HE4X).
The rear impact guard on the 327HE4X protects the engine from wear and damage.
HUSQVARNA 327HDA65X
HUSQVARNA 327HE4X / 327HE3X
A versatile hedge trimmer that makes trimming the hedge top easy.
Machines for faster cutting both high up and low down. ■■Remote angling of cutting bar for easy, efficient operation.
■■Angleable cutting bar for easier, more efficient operation.
■■Long reach saves the userÕs back and shoulders.
■■Low weight and well-balanced design make the hedge trimmer
■■The engine functions as a counterweight to the cutting bars,
easy to manoeuvre. ■■The engine placement directs the emissions away from the operator. ■■Smart Start reduces the resistance of the starter cord by up to 40 %, making the machine easy to start. ■■Soft handles give good grip and make operation more comfortable.
for better balance and manoeuvrability. ■■The ergonomic Balance Flexª harness is available as an accessory (327HE4X only). ■■Smart Start reduces the resistance of the starter cord by up to 40 %, making the machine easy to start.
Not available in UK.
TECHNICAL SPECIFICATIONS
327HE4X
327HE3X
Displacement, cm³
24.5
Displacement, cm³
24.5
24.5
Power, kW *
0.9
Power, kW *
0.9
0.9
Knife length, mm
65
Knife length, mm
55
55
4/5
4/4
Equivalent vibration level (a hv , eq ) front / rear handle, m / s²
327HDA65X
4.2 / 4.2
TECHNICAL SPECIFICATIONS
Equivalent vibration level (a hv , eq ) front / rear handle, m / s²
Weight, kg
6.2
Weight, kg
6.6
6.5
Length, cm
157
Length, cm
234
174
* Read more on engine power rating at page 42.
Angle adjustable cutting bars for easier, more efficient operation.
* Read more on engine power rating at page 42.
Well-balanced designs make the machines easy to manoeuvre.
The remote control enables fast and easy adjustment of the cutter bar during operation (327HE4X and 327HE3X).
41
TECHNiCAL SPECiFiCATiONS FOR HEDGE TRimmERS
226HS99S
226HS75S
Cylinder displacement, cm≥
23.6
23.6
Power, kW
0.85
0.85
Maximum power speed, rpm
8000
8000
Sound pressure level at operators ear, min / max, dB(A) *
92
93
Guaranteed sound power level, LWA dB(A) **
104
104
5.6 / 3.3
7.7 / 3.2
Equivalent vibration level (a hv , eq ) front / rear handle, m / s² *** Fuel tank volume, litres
0.5
0.5
Fuel consumption (g / KWh)
412
412
Exhaust emissions (Co average), g / kWh
118
118
Exhaust emissions (HC average), g / kWh
47.2
47.2
Exhaust emissions (Nox average), g / kWh
1.7
1.7
5.11:1
5.11:1
Knife Length, cm
108
75
Teeth opening, mm
28
28
Recommended maximum twig diameter, mm
22
22
4100
4110
Weight, kg
6.1
5.8
Length, cm
―
―
Gear ratio
Cutting speed, cut / min
― = Not available * Equivalent sound pressure level at the operator’s ear, measured according to EN ISO 22868, dB(A). Reported data for equivalent sound pressure level for the machine has a typical statistical dispersion (standard deviation) of 1 dB(A). ** Noise emissions in the environment measured as sound power (LWA) in conformity with EC directive 2000/14/EC. Reported sound power level for the machine has been measured with the original cutting attachment that gives the highest level. The guaranteed sound power level includes variation in production as well as variation from the test code with 1 – 3 dB(A). *** Equivalent vibrations levels (ahv,eq) at handles measured according to EN ISO 22867, m/s². Reported data for equivalent vibration level has a typical dispersion (standard deviation) of 1 m/s².
TECHNiCAL SPECiFiCATiONS FOR BATTERY HEDGE TRimmERS Battery type
Not available in UK. 536LiHD60X
536LiHD70X
Li-ion
Li-ion
Battery voltage,V
36
36
Weight with battery, kg
5.0
5.1
Weight without battery, kg Motor type
3.7
3.8
PMDC (4-brush)
PMDC (4-brush)
Knife lenght, mm
600
700
Knife speed, 1/min
4000
4000
Teeth opening, mm
30
30
Guaranteed sound power level, LWA dB(A) *
94
94
1.3 / 1.1
2.4 / 2.1
Equivalent vibration level (a hv , eq) front / rear handle, m / s² * *
* Noise emissions in the environment measured as sound power (LWA) in conformity with EC directive 2000/14/EC. The guaranteed sound power level includes variation in production as well as variation from the test code with 1 – 3 dB(A). ** Equivalent vibrations levels (ahv,eq) at handles measured according to EN ISO 22867, m/s². Reported data for equivalent vibration level has a typical dispersion (standard deviation) of 1 m/s².
NOmiNAL POWER A new machinery directive (2006 / 42 / EC) came into force on January 1, 2010, requiring manufacturers to declare the nominal power of engines, in kilowatts (kW). The power rating of the engines indicated is the average net power output during a normal working situations and fulflling applicable noise regulations (at specifed rpm, see owners manual) of a typical production engine for the engine model measured to SAE standard J 1349 / ISO 1585. Mass production engines may differ from this value. Actual power output for the engine installed in the fnal machine will depend on the operating speed, environmental conditions and other variables.
42
Not available in UK. 226HD75S
226HD60S
327HDA65x
327HE3x
327HE4x
23.6
23.6
24.5
24.5
24.5
0.85
0.85
0.9
0.9
0.9
8000
8000
8400
8400
8400
91
91
94
94
92
104
100
106
106
106
2.5 / 2.1
1.8 / 1.5
4.2 / 4.2
4/4
4/5
0.5
0.5
0.5
0.5
0.5
412
412
600
550
600
329
329
304
127
127
54.7
54.7
121
44
44
0.6
0.6
1.2
2
2
5.11:1
5.11:1
4.78:1
4.78:1
4.78:1
75
60
65
55
55
28
28
29
29
29
22
22
20
20
20
4100
4100
4184
4184
4184
6.0
5.8
6.2
6.5
6.6
―
―
157
174
234
43
Blowers
Experience force without even feeling it. Our backpack blowers have specially designed, unique fans that generate high air velocity and powerful airfow. As a result, you can effectively blow away even wet, heavy piles of leaves. The blowers are also ergonomic and easy to use. It is the debris that gives way to the strong air currents – not your shoulders and arms.
MAXIMUM A
IR SPEED
The geometry for blower fans has been inspired by turbo technology. Their large diameter allows for high pressure and a high peripheral speed at lower engine speeds. In addition, we have designed fans and fan housings that reduce turbulence and ensure minimal air loss. And we have optimised the pipes and bellows to generate streamlined airflows. All this contributes to high air speeds and powerful, directed air that allows you to work extremely effectively.
Extremely quiet operation. The 356BTX has a unique design that makes it the worldテ不 quietest petrol-powered blower. The reasons for this are threefold. First and foremost, the engine and fan are completely integrated under the covers using similar sound insulating plastic material to that used in doors and torpedo walls in cars (partition walls between the engine compartment and cab). The second reason is the intake air for cooling the engine and supplying the fan with blow air through the intakes both under the blower and between the blower and the userテ不 back. Intake air to the engine is supplied via the Air Injectionツェ air flter system, which also decreases the noise level. Third, the 356BTX has a silenced Blair-engine that runs at low speeds. The exhaust gas is sent out through a closed, tuned pipe before reaching the muffer. All this results in a pleasant noise level of 64 dB at 15 meters distance.
BEST POSSiBLE COmFORT AND EFFiCiENCY All our blowers are ergonomically designed for maximum manoeuvrability and minimum strain for you. The 356BTX has a particularly compact design with its centre of gravity close to your back, making it easier to carry than traditional blowers. All harnesses have wide, padded shoulder straps to reduce the strain on your upper body and shoulders. The comfortable waist belt distributes the weight effectively between your shoulders and hips. The harnesses are also ventilated through air spaces between your back and the harness. And you have the option of making individual adjustments to ensure that your work is comfortable and effective.
UNOBSTRUC TED
WORK
Air Injection邃「 (in the models 580BTS and 356BTX) is a sophisticated, effcient system that uses centrifugal power to clean the air. The air comes in through the nozzle and then passes the specially developed foam and folded paper flters. This air cleaning process ensures trouble-free operation even in dusty conditions, reduced wear and longer periods of work between flter cleanings.
HUSQVARNA 580BTS / 570BTS
Powerful blowers with robust design. ■■The X-Torq engine technology gives more performance and
less fuel consumption and exhaust emissions. ■■Unique fan design gives high blowing capacity. ■■Long-life components and specially developed air filters make for problem-free application and increased operating times. ■■Ergonomic harnesses with padded shoulder straps and strain relieving waist belts. ■■Comfort handle that can be easily angled where necessary. ■■Easily mountable handlebar for your left hand will facilitate working for longer periods (accesssory). ■■Wide, angled nozzle contributes to more efficient blowing aside of wet and very heavy debris (accessory).
X-Torq gives extra torque, up to 20 % less fuel consumption and up to 75 % lower exhaust emissions.
46
TECHNiCAL SPECiFiCATiONS
580BTS
570BTS
Displacement, cm≥
75.6
65.6
Power, kW *
3.1
2.9
Sound pressure level at operators ear, dB(A)
100
99
Noise level 15 m ANSI B 175.2
77
76
92.2
105.6
Max air speed, m / s
29
27.5
Max air fow in pipe, m³ / min
25.7
21.8
Weight, kg
11.8
11.2
Max air fow in housing, m³ / min
* Read more on engine power rating at page 48.
The 2-stage intake air filtration system ensures long operation periods even in dusty conditions.
The handles can be angled and have rubber inserts for a stable, comfortable grip.
HUSQVARNA 356BTX
The world’s quietest petrol-powered blower. ■■Enclosed design makes the blower silent and durable.
Unique fan design generates a high blowing capacity. ■■Air Injectionª contributes to efficient air filtration and problem-free operation. ■■Active vibration damping (Low Vib) and comfort handle that can be angled. ■■Engine housing with snap locks facilitate accessibility for maintenance. ■■Ergonomic harness for the best strain relief and comfort.
TECHNiCAL SPECiFiCATiONS
356BTx
Displacement, cm≥
51.7
Power, kW *
2.4
Sound pressure level at operators ear, dB(A)
91
Noise level 15 m ANSI B 175.2
64
Max air speed, m / s
79.13
Max air fow in housing, m³ / min
21.7
Max air fow in pipe, m³ / min
13.4
Weight, kg
10.4
* Read more on engine power rating at page 48.
Effective noise dampening with a gentler tone. The engine, fan housing and insulation reduce noise dramatically.
Exhaust emissions are below current and planned levels.
Comfortable, ventilated and load reducing harness with hip belt and wide shoulder straps.
47
TECHNiCAL SPECiFiCATiONS FOR BLOWERS
580BTS
570BTS
356BTx
Cylinder displacement, cm≥
75.6
65.6
51.7
Power, kW
3.1
2.9
2.4
Maximum power speed, rpm
7200
8000
6000
Idling speed, rpm
2000
2000
2300
Sound pressure level at operators ear, dB(A)*
100
99
91
Noise level 15 m ANSI B 175.2
77
76
64
Guaranteed sound power level, LWA dB(A) * *
112
110
100
Equivalent vibration level (a hv , eq ) right handle, m / s² * **
1.6
1.8
3.9
Fuel tank volume, litres
2.6
2.2
1.5
Fuel consumption, g / kWh
440
431
400 21.7
29
27.5
Air fow in pipe, m³ / min
25.7
21.8
13.4
Air Speed, m / s
92.2
105.6
79.13
Exhaust emissions (Co average), g / kWh
536
536
144
Exhaust emissions (HC+Nox average), g / kWh
49
49
49
Round
Round
Round+Flat
11.8
11.2
10.4
Air fow in housing, m³ / min
oEM Nozzle type Weight, kg
* Equivalent sound pressure level at the operator’s ear, measured according to EN15503 dB(A). The equivalent sound pressure level value is calculated with a work cycle of a duration of 1 / 7 for idling and 6 / 7 for racing. Reported equivalent sound pressure level for the machine has a typical statistical dispersion (standard deviation) of 1 dB(A). ** Noise emissions in the environment measured as sound power (LWA) in conformity with EC directive 2000/14/EC. The guaranteed sound power level includes variation in production as well as variation from the test code with 1 – 3 dB(A). *** Equivalent vibrations levels (ahv,eq) at handles, measured according to EN15503, m/s². The equivalent vibration level value is calculated with a work cycle of a duration of 1 / 7 idling and 6 / 7 for racing. Reported data for equivalent vibration level has a typical statistical dispersion (standard deviation of 1 m/s².
NOmiNAL POWER A new machinery directive (2006 / 42 / EC) came into force on January 1, 2010, requiring manufacturers to declare the nominal power of engines, in kilowatts (kW). The power rating of the engines indicated is the average net power output during a normal working situations and fulflling applicable noise regulations (at specifed rpm, see owners manual) of a typical production engine for the engine model measured to SAE standard J 1349 / ISO 1585. Mass production engines may differ from this value. Actual power output for the engine installed in the fnal machine will depend on the operating speed, environmental conditions and other variables.
48
Chainsaws
you don’t need to be a chainsaw professional to work as a professional. We want you to feel comfortable when working with our chainsaws. That your work is running smoothly, i.e. both safely and effectively. Whether you fell trees regularly or maybe less often, you still use your chain saw. Therefore, we are not just hung up on engine power and acceleration speeds when we develop our saws. We focus just as much on the functions that make the saws easy to use. This is to ensure you get a tool that does not restrict your work, but instead lets you deal with the task at hand in all conceivable situations.
Key features and benefits of our chainsaws: AUTOmATiCALLY TUNED ENGiNES ALLOW YOU TO FOCUS ON YOUR WORk
LiGHTWEiGHT AND SLEEk SAW BODiES FACiLiTATE YOUR WORk iN ALL POSSiBLE POSTURES
HiGH EFFiCiENCY ENGiNES GiVE YOU FULL POWER AND QUiCk ACCELERATiON
iNNOVATiVE ENGiNE TECHNOLOGY mEANS LOW FUEL CONSUmPTiON AND EmiSSiONS
ERGONOmiC DESiGN AND LOW ViBRATiONS ALLOW YOU TO WORk COmFORTABLY
UNiQUE TRiOBRAkE™ CHAiN BRAkE SYSTEm CONTRiBUTES TO SAFER, mORE EFFECTiVE WORk
A NUmBER OF CLEVER FEATURES mAkE THE CHAiNSAWS EASY TO USE FOR EVERYONE
HiGH CENTRE OF GRAViTY CLOSE TO THE FRONT HANDLE PROViDES SUPERB mANOEUVRABiLiTY
Optimal engine settings will keep you going. Our unique AutoTune™ engine function ensures that your engine always runs optimally. It automatically sets the correct amount of fuel at a certain speed in order to compensate for factors such as humidity, altitude, temperature, fuel and air flter clogging. AutoTune™ consists of five functions that interact with each other. The base is an AutoTune™ module that monitors and controls the engine. A magnetic valve is integrated into the module that controls the amount of fuel to the carburettor along with a temperature sensor that provides the AutoTune™ module with the relevant temperature information. Added to this is a valve sensor that monitors and keeps the AutoTune™ module updated on the position of the throttle trigger. The ignition module supplies the AutoTune™ module with electricity and information on the current speed. The result is a more reliable chainsaw that runs more smoothly. And you don’t have to spend time setting the carburettor manually.
AutoTune™ makes it easy for your servicing Husqvarna dealer to check the condition of your chainsaw engine. By connecting the saw to a computer, the service technician and you can quickly see in black and white what is working well and what is working less well and that might need attention.
NDER TESTED UN S O DITION C E M E R T EX All chainsaws undergo intensive testing, both in laboratories and out in the feld. We test run the machines for several hundred hours in water brake test rigs where chainsaws are loaded at different speeds to simulate felling. This is performed in order to detect any temperature problems. The test time corresponds to almost 10 times the run time in reality. In order to detect any vibration problems we also run the chainsaws at full throttle in laboratory test units for a long period of time. In addition, we expose the chainsaws to demanding impact tests as well as both extreme cold and sweltering heat, in order to ensure they make the grade when itÕs time for you to use them.
52
More power, less fuel and emissions. Many of our chainsaws and arborist saws are equipped with our patented engine technology X-Torq. It uses pure air instead of a mix of air and fuel to scavenge the exhaust fumes, which results in up to 20 % less fuel consumption and gives up to 75 % lower exhaust emissions. At the same time, the engine delivers extra torque over a wider rpm range, providing raw power and rapid acceleration for effcient operation.
Scan the QR tag to see a video clip about how X-Torq works.
LOW ViBRATiONS kEEP YOU ALERT Thanks to effective vibration damping (Low Vib), you can work comfortably and effciently – even during longer shifts. By separating the tank and handles from the engine and saw blades with carefully tuned anti vibration elements, we have managed to keep the vibrations in the handles at extremely low levels. All this to spare your arms and hands so that you stay alert and productive instead.
SUPERB MANO
EFFiCiENT AiR FiLTER SYSTEm mEANS SmOOTH OPERATiON Some models have Air Injection™, our sophisticated air cleaning solution. It uses centrifugal power to pre-clean the air from particles like sawdust before it reaches the flter system, which consists of specially developed foam and / or folded paper flters. This effcient air cleaning process provides trouble-free operation even in dusty conditions. Resulting in smoother running, reduced wear and longer periods between flter cleanings.
EUVRABILIT y
Great power is not necessarily synonymous with heavy, cumbersome machines. When we design our chainsaws, we always aspire to facilitate your work. Our latest models are very lightweight and sleek power packs. And we have lowered the front handle and thereby narrowed the distance between the handle and the saw’s centre of gravity. These along with several other large and small design solutions now make it easy to twist and turn even our most powerful chainsaws.
53
HUSQVARNA T540 XP ®
HUSQVARNA T435
To see the T540 XP¨ in action, visit www.youtube.com / Husqvarnaworldwide or use the QR-tag.
The saw that has everything full-time arborists are looking for. ■■Well-balanced, compact design, low weight and high centre
of gravity make the saw extra manoeuvrable. ■■The X-Torq engine technology gives a high torque and up to 20 %
less fuel consumption as well as up to 75 % lower exhaust emissions. ■■The engine adjusts automatically for optimal operation, regardless of factors like temperature, humidity and fuel type (AutoTuneª). ■■Air Injectionª means longer service intervals, more even running and reduced wear. ■■Efficient vibration dampening of the handles (Low Vib) makes operation more comfortable Ð even on long shifts. ■■Three different sized grips are included, to suit a wide range of users. ■■An extra eyelet means the saw can be attached to a harness, for easier climbing and handling while up a tree.
TECHNiCAL SPECiFiCATiONS
■■The X-Torq gives a high torque and up to 20 % less fuel
consumption as well as up to 75 % lower exhaust emissions. ■■The low weight makes the saw easy to lift and manoeuvre. ■■For fast and easy chain adjustments simply use the side-mounted
chain tensioner. ■■The right hand guard is perforated to give you a better overview
of the nose of the bar. ■■Smart Start is a function that contributes to quick starts by up to 40 % reduced resistance in the starter cord. ■■You can remove the air filter cover without any tools which makes maintenance easy.
TECHNiCAL SPECiFiCATiONS
T435
Cylinder displacement, cm≥
37.7
Cylinder displacement, cm≥
35.2
Power output, kW *
1.8
Power output, kW *
Recommended bar length min – max, cm / inch Weight (excluding cutting equipment), kg * Read more on engine power rating at page 66.
AutoTune™ means that the engine adjusts automatically for optimal operation, regardless of temperature, humidity, fuel type, etc (T540 XP®).
54
T540 xP ®
Versatile, fast and effective arborist saw.
30 – 40 / 12 – 16 3.7
1.5
Recommended bar length min – max, cm / inch Weight (excluding cutting equipment), kg
30 – 35 / 12–14 3.4
* Read more on engine power rating at page 64.
An extra eyelet for attaching the saw to a harness, facilitate climbing and handling (T540 XP®).
Air Injection™ is a sophisticated air filter system that provides smoother engine operation, reduced wear and – above all – longer working periods between filter cleaning (T540 XP®).
You can choose from three sizes of top handle to ensure you get a comfortable and perfect grip when working (T540 XP¨).
The X-Torq engine technology gives high torque as well as up to 20 % less fuel consumption and up to 75 % lower exhaust emissions.
Accessories include the TechliteÂŞ guide bar which is 20 % lighter and 25 % stiffer than a conventional laminated guide bar, making the chainsaw more balanced.
55
HUSQVARNA 543 XP ®
HUSQVARNA 550 XP ® / 550 XP ® TRIOBRAKE ™ 545 / 545 TRIOBRAKE ™
N ew !
Rapid, lightweight and convenient all-round chainsaws.
Versatile, fast saws for a multitude of work tasks. ■■X-Torq delivers high torque and cuts fuel consumption by
■■X-Torq delivers high torque and cuts fuel consumption by up to
20 % and cuts exhaust emissions by up to 75 %. ■■Effective anti-vibration system (Low Vib) for comfortable work. ■■Air Injectionª means longer service intervals, more even running and reduced wear. ■■Sturdily built magnesium crankcase and forged three-piece crankshaft for maximum durability. ■■Smart Start makes the machine start quickly. Resistance in the starter cord is reduced by up to 40 %. ■■The 543 XP¨ is also available as 543 XP¨ G with heated handles that make the saw more comfortable to use in cold and damp conditions. Not available in UK.
up to 20 % and cuts exhaust emissions by up to 75 %. ■■The engine adjusts automatically for optimal operation, regardless of factors like temperature, humidity and fuel type (AutoTuneª). ■■RevBoostª is a unique engine feature that provides extremely fast acceleration and extra high chain speed, which make de-limbing more efficient (applies to 550 XP¨) ■■Effective anti-vibration system (Low Vib) for comfortable work. ■■Air Injectionª means longer service intervals, more even running and reduced wear. ■■Sturdily built magnesium crankcase and forged three-piece crankshaft for maximum durability. ■■Smart Start makes the machine start quickly. Resistance in the starter cord is reduced by up to 40 %. ■■The 550 XP¨ is also available as 550 XP¨ G with heated handles that make the saw more comfortable to use in cold and damp conditions. ■■Both models are available with the unique, triple activated chain brake TrioBrakeª for more efficient, safe and convenient work. 545 TrioBrake™ and 550XP® TrioBrake™ are not available in UK.
TECHNiCAL SPECiFiCATiONS
543 xP ®
TECHNiCAL SPECiFiCATiONS
550 xP ® / TrioBrake™ 545 / TrioBrake™
Cylinder displacement, cm≥
43.1
Cylinder displacement, cm≥
50.1
50.1
Power output, kW *
2.2
Power output, kW *
2.8
2.5
33 – 50 / 13 – 20
33 – 50 / 13 – 20
4.9 / 5.0
4.9 / 5.0
Recommended bar length min – max, cm / inch Weight (excluding cutting equipment), kg
33 – 45 / 13 – 18 4.5
Recommended bar length min – max, cm / inch Weight (excluding cutting equipment), kg
* Read more on engine power rating at page 64. * Read more on engine power rating at page 64.
The triple activated chain brake TrioBrake™ makes you work more safely, conveniently and efficiently (550 XP® and 545).
56
The centrifugal air cleaning system Air Injection™ contributes to reduced wear and longer filter cleaning intervals.
Side-mounted chain tensioner makes chain adjustment quick and easy.
HUSQVARNA 562 XP ¨ / 560 XP ¨ / 555
HUSQVARNA 576 XP ¨ / 570
Powerful, effective saw for demanding jobs.
Robust chainsaws that deliver great power.
■■X-Torq delivers high torque and cuts fuel consumption by
■■X-Torq delivers high torque and cuts fuel consumption by up to
up to 20 % and cuts exhaust emissions by up to 75 %. ■■The engine adjusts automatically for optimal operation, regardless of factors like temperature, humidity and fuel type (AutoTune™). ■■RevBoost™ is a unique engine feature that provides extremely fast acceleration and extra high chain speed, which make de-limbing more efficient (applies to 560 XP® and 562 XP®). ■■Effective anti-vibration system (Low Vib) for comfortable work. ■■Air Injection™ means longer service intervals, more even running and reduced wear. ■■Sturdily built magnesium crankcase and forged three-piece crankshaft for maximum durability. ■■Smart Start makes the machine start quickly. Resistance in the starter cord is reduced by up to 40 %. ■■The 560 XP® and 562 XP® are also available as 560 XP® G and 562 XP® G with heated handles that make the saws more comfortable to use in cold and damp conditions. ■■562 XP® has an extra large air filter for longer trouble-free use. ■■562 XP® can be fitted with bars up to 28".
20 % and cuts exhaust emissions by up to 75 %. ■■Smart Start makes the machine start quickly. Resistance in the starter cord is reduced by up to 40 %. ■■Air Injection™ means longer service intervals, more even running and reduced wear. ■■The engine adjusts automatically for optimal operation, regardless of factors like temperature, humidity and fuel type (AutoTune™). ■■The 576 XP® is also available as 576 XP® G with heated handles that make the saw more comfortable to use in cold and damp conditions. 570 is not available in UK.
562 XP¨ is not available in UK.
TECHNiCAL SPECiFiCATiONS
562 xP ®
560 xP ®
555
TECHNiCAL SPECiFiCATiONS
59.8
59.8
59.8
Cylinder displacement, cm≥ Power output, kW *
Cylinder displacement, cm≥
3.5
3.5
3.1
38 – 70 / 15 – 28
33 – 60 / 13 – 24
33 – 60 / 13 – 24
5.7
5.6
5.6
Power output, kW * Recommended bar length min – max, cm / inch Weight (excluding cutting equipment), kg
Recommended bar length min – max, cm / inch Weight (excluding cutting equipment), kg
576 xP ®
570
73.5
67.9
4.2
3.6
38 – 70 / 15 – 28 38 – 70 / 15 – 28 6.6
6.7
* Read more on engine power rating at page 64.
* Read more on engine power rating at page 64.
X-Torq delivers high torque and cuts fuel consumption by up to 20 % and cuts exhaust emissions by up to 75 % compared to an conventional two-stroke engine.
Smart Start makes the machine start quickly. Resistance in the starter cord is reduced by up to 40 %.
RevBoost™ provides rapid acceleration and higher chain speed for extra efficient de-limbing.
57
HUSQVARNA 536Li XP ¨
HUSQVARNA 436Li
Lightweight, powerful and all-round battery saw.
Powerful and effective saw with battery power.
■■Powerful Li-ion battery delivers performance that is second
■■Powerful Li-ion battery delivers performance that is second
to none. ■■Well-balanced design, low weight and high centre of gravity make the saw extra manoeuvrable. ■■Economy mode with savEª contributes to longer working hours on one battery Ð without having to recharge or change it. ■■Intuitive keypad means that you start and stop the saw by just pushing one button. ■■Effective inertia-activated chain brake makes work safer. ■■Flip-up oil tank cap that is easy to open. ■■The bar nuts are integrated into the clutch housing to ensure they are not lost when changing the guide bar. ■■Tool-less chain tensioning simplifies and speeds up chain replacement.
to none. ■■Well-balanced design, low weight and high centre of gravity make the saw extra manoeuvrable. ■■Economy mode with savEª contributes to longer working hours on one battery Ð without having to recharge or change it. ■■Intuitive keypad means that you start and stop the saw by just pushing one button. ■■High chain speed contributes to smooth, efficient cutting. ■■Effective inertia-activated chain brake makes work safer. ■■Flip-up oil tank cap that is easy to open. ■■The bar nuts are integrated into the clutch housing to ensure they are not lost when changing the guide bar.
TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS
536Li XP®
36
Battery voltage,V
36
Chainspeed, m / s
15.0
Chainspeed, m / s
20.0
Recommended bar length min – max, cm / inch Weight without cutting equipment, kg
Economy mode savE™ means maximum runtime without having to change battery.
58
436Li
Battery voltage,V
25 – 35 / 10 –14 3.8
Recommended bar length min – max, cm / inch Weight without cutting equipment, kg
The chainsaw is operated using an intuitive keypad, which makes it extremely easy to start and stop. Just push a button.
25 – 35 / 10 –14 3.7
The efficient Husqvarna-developed motor gives you high chain speed and best possible cutting performance.
HUSQVARNA T536Li XP ®
Accessories for battery chainsaws.
N ew ! LI-ION BACKPACK BATTERy
Robust and powerful, as well as ergonomic and adjustable backpack battery that allows you to work continuously up to a whole day.
Compact, fast batterypowered arborist saw. ■■Powerful Li-ion battery delivers performance that is second to none. ■■Well-balanced and compact design, low weight and high centre of
gravity make the saw extra manoeuvrable. ■■Effective anti-vibration system (Low Vib) for comfortable work. ■■Economy mode with savE™ contributes to longer working hours
on one battery – without having to recharge or change it.
CHARGER
■■Intuitive keypad means that you start and stop the saw by just
pushing one button. ■■High chain speed contributes to smooth, efficient cutting. ■■Effective inertia-activated chain brake makes work safer. ■■Two robust eyelets for connecting the machine to the chainsaw strop and harness facilitates climbing and operation. ■■Robust eye makes it easy to quickly connect the saw to the climbing harness. ■■Flip-up oil tank cap that is easy to open. ■■The bar nuts are integrated into the clutch housing to ensure they are not lost when changing the guide bar.
TECHNICAL SPECIFICATIONS
36
Chainspeed, m / s
20.0
Weight without cutting equipment, kg
LI-ION BATTERy
Li-ion batteries deliver unsurpassed, long-lasting power and performance. The batteries come in a range of capacities: BLi 80 (2.1 Ah) and BLi 150 (4.2 Ah).
T536Li XP¨
Battery voltage,V Recommended bar length min – max, cm / inch
It takes approximately 35 minutes to charge a battery. This means that if you have two batteries, you’re able to work nonstop since the charging time is shorter than the usual working time.
25 – 35 / 10 –14 3.6
N ew ! BLi BATTERy BAG
Keeps batteries warm even during winter for longest possible runtime. Effectively absorbs shocks and protects against dirt, grime and moisture. Can be attached to the belt. Suitable for BLi 60, BLi 80, BLi 110 and BLi 150 batteries.
TECHLITE GUIDE BAR Two robust eyelets make it easy to connect the machine to the chainsaw strop and the climbing harness.
Is 20 % lighter and 25 % stiffer than a conventional laminated guide bar, making the chainsaw more balanced. Available with 3/8" mini chain pitch, in lengths 12" and 14".
59
HUSQVARNA 327P5X / 327P4
HUSQVARNA 327PT5S
Robust, versatile and effective pole saws.
Lightweight, well balanced pole saw with long range.
■■Smart Start is a function that contributes to quick starts by
■■Adjustable working height thanks to the telescopic tube.
up to 40 % reduced resistance in the starter cord. ■■Ergonomic handle makes the saw comfortable to operate. ■■Side-mounted chain tensioner for easy, tool-less chain adjustments. ■■Rear impact guard protects the tank and starter (goes for 327P5X). ■■The unique, ergonomic harness Balance Flex™ helps make your work comfortable (327P5X). ■■The two-part shaft facilitates tranport and storage (327P5X).
■■The saw has the longest reach on the market. ■■The unique, ergonomic harness Balance Flex™ helps make
your work comfortable. ■■Commercial graded components for long durability in tough
conditions.
327P5X is not available in UK.
TECHNiCAL SPECiFiCATiONS
327P5x
327P4
Cylinder displacement, cm≥
24.5
24.5
Cylinder displacement, cm≥
Power output, kW *
0.9
0.9
Power output, kW *
Recommended bar length min – max, cm / inch Length, extended, including cutting equipment, cm / inch Weight (excluding cutting equipment), kg
25 – 30 / 10 –12 25 – 30 / 10 –12 350 / 138
240 / 95
TECHNiCAL SPECiFiCATiONS
Recommended bar length min – max, cm / inch Length, extended, including cutting equipment, cm / inch Weight (excluding cutting equipment), kg
6.4
6.1
327PT5S
24.5 0.9 25 – 30 / 10 – 12 397 / 156.3 7.3
* Read more on engine power rating at page 64.
* Read more on engine power rating at page 64.
The unique, ergonomic harness Balance Flex™ helps make your work comfortable (applies to 327P5X and 327PT5S).
Adjustable working height thanks to the telescopic tube (goes for 327PT5S).
60
Smart Start is a function that contributes to quick starts by up to 40 % reduced resistance in the starter cord (applies to 327P5X and 327P4).
CUTTiNG EQUiPmENT GUiDE, CHAiN AND BARS
3120 XP¨
390 XP¨ * / 395 XP¨
570 / 576 XP¨
365 / 372 XP¨
555 / 560 XP¨
562 XP¨
460 Rancher
455 Rancher / 455 e-series Rancher
545 / 550 XP¨
445 / 445 e-series / 450 / 450 e-series / 543XP¨
435 / 435 e-series / 440 / 440 e-series
Large bar mounting point
135 / 135 e-series
T540 XP¨
T435
T425
317 Electric / 321 Electric
T536Li XP¨
436Li / 536Li XP¨
327PT5S
327P4 / 327P5X
Small bar mounting point
Bar length inches / cm
Chain pitch inches
Gauge inches / cm
Product number
Drive links
Type
Product number
10 / 25
3 / 8 mini
.043 / 1.1
501 95 95-40
40
H38 Low Vib
581 80 79-40
12 / 30 14 / 35
3 / 8 mini 3 / 8 mini
.043 / 1.1 .043 / 1.1
501 95 95-45 501 95 95-52
45 52
H38 Low Vib H38 Low Vib
501 84 23-54 501 84 23-52
10 / 25
3 / 8 mini
.050 / 1.3
505 89 16-40
40
H37 Low Vib
576 93 65-40
12 / 30
3 / 8 mini
.050 / 1.3
501 95 92-45
45
H37 Low Vib
576 93 65-45
14 / 35
3 / 8 mini
.050 / 1.3
501 95 92-52
52
H37 Low Vib
576 93 65-52
16 / 40
3 / 8 mini
.050 / 1.3
501 95 92-56
56
H37 Low Vib
576 93 65-56
13 / 33
.325
.050 / 1.3
508 92 61-56
56
H30 Low Vib
501 84 06-56
15 / 38
.325
.050 / 1.3
508 92 61-64
64
H30 Low Vib
501 84 06-64
16 / 40
.325
.050 / 1.3
508 92 61-66
66
H30 Low Vib
501 84 06-66
18 / 45
.325
.050 / 1.3
508 92 61-72
72
H30 Low Vib
501 84 06-72
20 / 50
.325
.050 / 1.3
508 92 61-80
80
H30 Low Vib
501 84 06-80
13 / 33
.325
.058 / 1.5
508 91 21-56
56
H25 Low Vib
501 84 04-56
15 / 38
.325
.058 / 1.5
508 91 21-64
64
H25 Low Vib
501 84 04-64
16 / 40
.325
.058 / 1.5
508 91 21-66
66
H25 Low Vib
501 84 04-66
18 / 45
.325
.058 / 1.5
508 91 21-72
72
H25 Low Vib
501 84 04-72
20 / 50
.325
.058 / 1.5
508 91 21-80
80
H25 Low Vib
501 84 04-80
15 / 38
3/8
.058 / 1.5
508 91 41-56
56
H42 Low Vib
501 84 14-56
16 / 40
3/8
.058 / 1.5
508 91 41-60
60
H42 Low Vib
501 84 14-60
18 / 45
3/8
.058 / 1.5
508 91 41-68
68
H42 Low Vib
501 84 14-68
20 / 50
3/8
.058 / 1.5
510 15 35-72
72
H42 Low Vib
501 84 14-72
15 / 38
3/8
.058 / 1.5
508 91 31-56
56
H42 Low Vib
501 84 14-56
16 / 40
3/8
.058 / 1.5
508 91 31-60
60
H42 Low Vib
501 84 14-60
18 / 45
3/8
.058 / 1.5
508 91 31-68
68
H42 Low Vib
501 84 14-68
20 / 50
3/8
.058 / 1.5
544 28 55-72
72
H42 Low Vib
501 84 14-72
12 / 30
3 / 8 mini
.043 / 1.1
578 10 68-45
45
H38 Low Vib
501 84 23-45
14 / 35
3 / 8 mini
.043 / 1.1
578 10 68-52
52
H38 Low Vib
581 80 79-52
12 / 30
3 / 8 mini
.050 / 1.3
576 83 07-45
45
H37 Low Vib
576 93 65-45
14 / 35
3 / 8 mini
.050 / 1.3
576 83 07-52
52
H37 Low Vib
576 93 65-52
16 / 40
3 / 8 mini
.050 / 1.3
576 83 07-56
56
H37 Low Vib
576 93 65-56
20 / 50
3/8
.058 / 1.5
544 90 25-72
72
H42 Low Vib
501 84 14-72
28 / 70
3/8
.058 / 1.5
544 90 25-92
92
H42 Low Vib
501 84 14-92
18 / 45
3/8
.058 / 1.5
501 95 77-68
68
H42 Low Vib
501 84 14-68
20 / 50
3/8
.058 / 1.5
501 95 77-72
72
H42 Low Vib
501 84 14-72
18 / 45
3/8
.058 / 1.5
501 95 69-68
68
H42 Low Vib
501 84 14-68
20 / 50
3/8
.058 / 1.5
501 95 69-72
72
H42 Low Vib
501 84 14-72
24 / 60
3/8
.058 / 1.5
501 95 69-84
84
H42 Low Vib
501 84 14-84
28 / 70
3/8
.058 / 1.5
501 95 69-92
92
H42 Low Vib
501 84 14-92
10 / 25
1/4
.050 / 1.3
505 89 15-60
60
H00
501 84 40-60
10 / 25
1/4
.050 / 1.3
575 84 22-58
58
H00
501 84 40-58
12 / 30
1/4
.050 / 1.3
575 84 22-64
64
H00
501 84 40-64
18 / 45
3/8
.058 / 1.5
501 95 80-68
68
H42 Low Vib
501 84 14-68
20 / 50
3/8
.058 / 1.5
501 95 80-72
72
H42 Low Vib
501 84 14-72
24 / 60
3/8
.058 / 1.5
501 95 80-84
84
H42 Low Vib
501 84 14-84
28 / 70
3/8
.058 / 1.5
501 95 80-92
92
H42 Low Vib
501 84 14-92
24 / 60
.404
.063 / 1.6
507 47 60-46
76
H64
501 84 31-76
28 / 70
.404
.063 / 1.6
501 58 96-01
84
H64
501 84 31-84
30 / 75
.404
.063 / 1.6
501 95 81-92
92
H64
501 84 31-92
36 / 90
.404
.063 / 1.6
501 95 81-04
104
H64
501 84 31-04
42 / 105
.404
.063 / 1.6
501 92 18-24
124
H64
501 84 31-24
LAMINATED BAR WITH NOSE WHEEL
LAMINATED BAR WITH NOSE WHEEL, TECHLITEª
LAMINATED BAR WITH REPLACEABLE TIP, TECHLITEª
SOLID BAR WITH REPLACEABLE TIP
SOLID BAR
* Solid bar with .404 chain pitch on 390 XP ¨ is optional on certain markets.
61
ACCESSORiES CHAiNSAWS
N ew !
fOREST HELMET, TECHNICAL
A robust yet lightweight helmet with a completely new design – packed with smart solutions that lessen the weight, enable a more personal ft and ensure a better head temperature even during long shifts. It also offers an improved feld of vision and a headlamp slot. 585 05 84-01 JACKET, TECHNICAL
JACKET, TECHNICAL EXTREME
Jacket with a tight ft. Has 4-way stretch material for great movability, extra reinforcement for high durability and ventilation zippers for good comfort. Refective logotype on chest and refective band on arms give excellent visibility. 578 16 60-xx
Has a slim ft. Made of advanced stretch material for high movability. Has extra reinforcement on critical areas, pre-bent arms and ventilation zippers under the arms. Refective fabric on shoulders and fuorescent orange on upper part gives good visibility. 578 16 63-xx
TROUSERS, TECHNICAL
TROUSERS, TECHNICAL EXTREME
Trousers with the same tight ft, stretch material, reinforcements, ventilation and refective material as the jacket. Also, pre-bent knees for better movement and fve useful pockets. 578 16 61-xx
Trousers with the same slim ft, stretch material, reinforcements as the jacket. Have pre-bent knees with refective fabric, ventilation zippers at the back, adjustable waist and removable braces. Also, four pockets with zipper and one for a ruler. Removable braces are included. 578 16 65-xx
N ew !
LEATHER BOOTS WITH SAW PROTECTION, TECHNICAL 24
Improved model with new heel construction, more stabile upper part with softer inside and new sole for even better grip. Made of 100 % waterproof Sympatex®, which has good ventilation. Extra padding, steel toecap and rubber reinforcements means great protection and comfort. 578 78 56-xx
GLOVES, TECHNICAL
Tight, comfortable gloves with goat leather palms for good protection against moisture and laminated spandex fabric on the upper sides for great durability. 579 38 04-xx, 579 38 10-xx (with saw protection.)
IT y A HIGH DURABIL
ND COMfORT
Stay sharp. Add safety. We’re setting new standards in protective clothing. Safety, comfort, modern styling and technology combined to produce clothes that help you work conveniently and effciently. All garments have been rigorously tested to provide good protection. Also, jackets and trousers are lightweight and fexible which allows you to work fast and unobstructed.
Ventilation zipper under the arms.
62
Protective material that comprises of fewer layers making it lighter but still with the same protection.
Reinforcement with reflective material on arms and shoulders.
Pre-bent arms for movement and comfort.
EyELET
Eyelet with unique design, made for arborists who use a standard chainsaw. Offers a safe way to connect the chainsaw to the chainsaw strop. Has an overload release. 578 07 71-01
TECHLITE™ BAR ARBORIST
20 % lighter than a regular laminated bar and with 25 % better rigidity. ItÕs less susceptible to bending and has a low weight, which gives a more balanced chainsaw. 576 83 07-xx ARBORIST HELMET, TECHNICAL CHAINSAW STROP
To be used together with a chainsaw hook for connecting the chainsaw to a belt. Has an elastic design. Measures 0,5 m when relaxed and 1,25 fully stretched out. 577 43 80-01
CHAINSAW HOOK
Robust construction. Fits any harness with removable belt. Designed for easy connection of chainsaw to a belt. Steel 577 43 79-01. Black 580 80 03-01.
Lightweight and ventilated helmet for professional arborists, approved for work at heights. Has a unique harness adjustment with two wheels that centres the head in the helmet for best balance and stability. 578 09 23-01
Professional arborist accessories that’ll keep you protected.
PROTECTIVE GLASSES
Yellow tinted lenses (544 96 37-02) give improved vision in dark conditions. Grey tinted lenses (544 96 37-03) with UV protection improve vision in sunny conditions. Goggles (544 96 39-01) developed for people who wear eyeglasses, anti-fog treated and durable against impact. Clear 544 96 37-01.
BAG
Roomy bag (105 litres) for your protective equipment. 576 85 95-01. With wheels: 576 85 90-01.
N ew ! PRUNING SAWS
New generation of extremely sharp and ergonomic pruning saws. Foldable saw with 200 mm blade for different applications (967 23 64-01). Straight saw with 300 mm blade for sawing of fresh and dry wood (967 23 65-01). Holster included. Curved saw with 300 mm blade for heavy pruning (967 23 66-01). Holster included. Not available in UK.
Great ventilation and thin ABS shell and inside of styrofoam gives comfort and light weight.
HUSQVARNA TWO-STROKE OIL, XP ® SyNTHETIC
1 litre dosage 578 03 70-03. 4 litre 578 03 71-03, 0,1 litre 578 18 03-03. HUSQVARNA TWO-STROKE OIL, LS+
1 litre dosage 578 03 70-02, 4 litre 578 03 71-02, 0,1 litre 578 18 03-02.
Unique designed eyelet that offers a safe way to connect the chainsaw to the chainsaw strop.
COMBI CAN read more on page 32.
63
TECHNiCAL SPECiFiCATiONS FOR CHAiNSAWS
Not available in UK.
Not available in UK.
T435
T540 XP ®
543 XP ®
545
545 TrioBrakeª
Cylinder displacement, cm³
35.2
37.7
43.1
50.1
50.1
Power output, kW
1.5
1.8
2.2
2.5
2.5
Fuel tank volume, litres
0.26
0.34
0.42
0.52
0.49
Oil tank volume, litres
0.17
0.2
0.27
0.27
0.27
Chain pitch, inch
3/8
3/8
.325
.325
.325
Recommended bar length, min – max, cm / inch
30 – 35 / 12 – 14
30 – 40 / 12 – 16
33 – 45 / 13 – 18
33 – 50 / 13 – 20
33 – 50 / 13 – 20
Sound pressure level at operators ear, dB(A)*
103
104
101
106
106
Guaranteed sound power level, LWA, dB(A)* *
114
116
113
116
116
4.1 / 3.9
3.1 / 3.2
2.8 / 3.5
2.8 / 3.7
3.0 / 3.7
3.4
3.7
4.5
4.9
5.0
Equivalent vibration level (a hv , eq ) front / rear handle, m / s² * ** Weight (excl. cutting equipment), kg
* Equivalent sound pressure level, according to ISO 22868, is calculated as the time-weighted energy total for different sound pressure levels under various working conditions. Typical statistical dispersion for equivalent sound pressure level is a standard deviation of 1 dB(A). ** Noise emissions in the environment measured as sound power (LWA) in conformity with EC directive 2000 /14 / EC. The guaranteed sound power level includes variation in production as well as variation from the test code with 1 Ð 3 dB(A). *** Equivalent vibration level, according to ISO 22867, is calculated as the time-weighted energy total for vibration levels under various working conditions. Reported data for equivalent vibration level has a typical statistical dispersion (standard deviation) of 1 m/s².
TECHNiCAL SPECiFiCATiONS FOR POLESAW
Not available in UK. 327P4
327P5X
327PT5S
Cylinder displacement, cm³
24.5
24.5
24.5
Power output, kW
0.9
0.9
0.9
Fuel tank volume, litres
0.5
0.5
0.5
Oil tank volume, litres
0.22
0.22
0.14
Chain pitch, inch
3/8
3/8
1/4
25 Ð 30 / 10 Ð 12
25 Ð 30 / 10 Ð 12
25 Ð 30 / 10 Ð 12
Recommended bar length, min Ð max, cm / inch Sound pressure level at operators ear, dB(A)*
95
86
92
Guaranteed sound power level, LWA, dB(A)* *
105
105
105
Equivalent vibration level (a hv , eq ) front / rear handle, m / s² * **
2.9 / 2.8
3.4 / 1.9
3.04 / 3.02
Length, extended, including cutting equipment, cm / inch
240 / 95
350 / 138
397 / 156.3
6.1
6.4
7.3
Weight (excl. cutting equipment), kg
* Equivalent sound pressure level, according to ISO 22868, is calculated as the time-weighted energy total for different sound pressure levels under various working conditions. Typical statistical dispersion for equivalent sound pressure level is a standard deviation of 1 dB(A). ** Noise emissions in the environment measured as sound power (LWA) in conformity with EC directive 2000 /14 / EC. The guaranteed sound power level includes variation in production as well as variation from the test code with 1 Ð 3 dB(A). *** Equivalent vibration level, according to ISO 22867, is calculated as the time-weighted energy total for vibration levels under various working conditions. Reported data for equivalent vibration level has a typical statistical dispersion (standard deviation) of 1 m/s².
NOmiNAL POWER A new machinery directive (2006 / 42 / EC) came into force on January 1, 2010, requiring manufacturers to declare the nominal power of engines, in kilowatts (kW). The power rating of the engines indicated is the average net power output during a normal working situations and fulflling applicable noise regulations (at specifed rpm, see owners manual) of a typical production engine for the engine model measured to SAE standard J 1349 / ISO 1585. Mass production engines may differ from this value. Actual power output for the engine installed in the fnal machine will depend on the operating speed, environmental conditions and other variables.
64
Not available in UK.
Not available in UK.
550 XP ¨
550 XP ¨ TrioBrakeª
555
560 XP ¨
562 XP ¨
570
576 XP ¨
50.1
50.1
59.8
59.8
59.8
67.9
73.5
2.8
2.8
3.1
3.5
3.5
3.6
4.2
0.52
0.49
0.65
0.65
0.65
0.7
0.7
0.27
0.27
0.33
0.33
0.35
0.4
0.4
.325
.325
.325
.325
3/8
3/8
3/8
33 – 50 / 13 – 20
33 – 50 / 13 – 20
33 – 60 / 13 – 24
33 – 60 / 13 – 24
38 – 70 / 15 – 28
38 – 70 / 15 – 28
38 – 70 / 15 – 28
106
106
106
106
106
105
105
116
116
118
118
118
115
116
2.8 / 3.7
3.0 / 3.7
2.7 / 3.2
4.4 / 5.3
4.4 / 5.3
3.2 / 3.4
2.9 / 3.6
4,9
5.0
5.6
5.6
5.7
6.7
6.6
TECHNiCAL SPECiFiCATiONS FOR BATTERY CHAiNSAWS 436Li
536Li XP¨
T536Li XP¨
BLDC (brushless)
BLDC (brushless)
BLDC (brushless)
Automatic
Automatic
Automatic
Sound pressure level at operators ear, dB(A)*
93
93
93
Guaranteed sound power level, LWA, dB(A)* *
106
106
106
25 Ð 35 / 10 Ð 14
25 Ð 35 / 10 Ð 14
25 Ð 35 / 10 Ð 14
2.2 / 2.4
2.5 / 2.8
2.0 / 2.4
Chain speed at max power, m / s
15
20
20
Weight (excl. cutting equipment), kg
3.8
3.7
3.6
Motor type Oil pump type
Recommended bar length, min Ð max, cm / inch Equivalent vibration level (a hv , eq ) front / rear handle, m / s² * *
Battery voltage, V Battery type Weight of one battery, kg
36
36
36
Li-ion
Li-ion
Li-ion
1.3
1.3
1.3
Battery model name
BLi 150
BLi 150
BLi 150
Typical battery charging time to 80 / 100%
25 / 35
25 / 35
25 / 35
35
35
35
Battery runtime (free run) with savEª activated
* Equivalent sound pressure level, according to ISO 22868, is calculated as the time-weighted energy total for different sound pressure levels under various working conditions. Typical statistical dispersion for equivalent sound pressure level is a standard deviation of 1 dB(A). ** Noise emissions in the environment measured as sound power (LWA) in conformity with EC directive 2000 /14 / EC. The guaranteed sound power level includes variation in production as well as variation from the test code with 1 – 3 dB(A). *** Equivalent vibration level, according to ISO 22867, is calculated as the time-weighted energy total for vibration levels under various working conditions. Reported data for equivalent vibration level has a typical statistical dispersion (standard deviation) of 1 m/s².
65
Power cutters
Handle today’s work with tomorrow’s cutting technology. WeÕre driven by constant change. By a curiosity and a desire to advance our power cutters as well as the cutting industry, through the introduction of new technology Ð often developed in-house. Large and small innovations that help you cut more effciently – with greater precision and less effort. Our basic philosophy is to offer you cutters with high power, without compromising on comfort and versatility.
Highly efficient cutting Ð without dust and slurry. Power cutting in sensitive or public locations – whether indoors or outdoors – can be problematic. Sometimes it’s not possible to use water, other times there are limitations on the spreading of dust. The solution is DEX , our innovative dust management system for clean and effcient wet and dry cutting. For wet cutting, many of our machines have a smart kit with an integrated regulator that ensures a constant water fow that’s suffcient to bind the dust without an excess of water or slurry. For dry cutting, the K 3000 Vac has a unique dust collecting unit that’s easy to install on the machine. The result? Dust collection that no other machine comes close to.
mORE POWER, LESS FUEL AND EmiSSiONS our X-Torq engines provide a lot of power and are still able to keep both fuel consumption and emissions low. This technology uses air to flush out the emissions rather than fuel-air mixture as is done in conventional 2 stroke engines, and is thereby able to reduce emissions by up to 75 % and lower fuel consumption by 20 %. The new K 760 has an optimized engine which further saves fuel, reduces emissions and boosts performance. It is easy to start and has extremely low vibrations.
TIME MAXIMUM UP With the new generation of Active Air Filtration™ you can run our power cutters for a long period of time. Basically until you notice that the machines are starting to lose power. How? Firstly, it uses centrifugal power to make the air up to 93 % cleaner from dust particles and dirt. Secondly, the air passes a paper flter, which fltrates the smallest dust particles. The result of all this is less engine wear and longer service intervals – even when cutting in tough conditions.
HUSQVARNA K 760
HUSQVARNA K 970
Powerful, efficient cutter at the technological forefront.
Reliable machine with high power-to-weight ratio.
■■Top class ergonomics thanks to high power/weight ratio,
■■Active Air Filtrationª is one of the most efficient air filtration
low vibration levels (below 2.5 m /s²) and steplessly adjustable magnesium blade guard. ■■Optimized engine performance and 5 % further fuel savings through the new efficient cylinder design, digital ignition system and X-Torq engine technology. ■■Easy to start thanks to the digital ignition system, fast idle lock in choke lever and improved starter grip. ■■The DEX system provides superior dust control and less water and slurry, with a new-designed water valve allowing for progressive water flow adjustment. ■■Reliable operation and minimal service requirements through Active Air Filtrationª and DuraStarterª. ■■SmartCarbª and built-in automatic filter compensation maintain high power and lowers fuel consumption. ■■Blades with 20 mm and 25.4 mm (2") bore can be fitted thanks to the multi-fit blade bushing.
TECHNiCAL SPECiFiCATiONS
Engine
fuel consumption and more power. ■■DuraStarterª, the dust-sealed starter, and the durable starter cord reduce the risk of downtime and increase reliability and product life. ■■SmartCarbª, built-in automatic filter compensation, maintains high power and lowers fuel consumption. ■■Easy to start thanks to Air Purge and decompression valve. ■■The Poly-V belt provides better transmission of power, less frequent re-tensioning and greatly extended product life. ■■Efficient vibration dampening reduces vibrations to less than 5 m /s² (applies to the 350 and 400 mm blades), for more convenient operation. ■■DEX Ð water-saving wet cutting kit for efficient dust management. ■■Fuel indicator in the tank shows fuel level, to help avoid unnecessary stoppages.
TECHNiCAL SPECiFiCATiONS
Engine
k 970
Air-cooled 2 stroke engine
Displacement, cm≥
74
Displacement, cm≥
94
Power, kW *
3.7
Power, kW *
4.8
* Read more on engine power rating at page 73.
The new cylinder design of K 760 improves the efficient X-Torq engine even further: 5 % less fuel consumption and 15 % lower emissions.
68
k 760
Air-cooled 2 stroke engine
systems on the market. ■■Engine with X-Torq produces 75 % less emissions, 20 % lower
* Read more on engine power rating at page 73.
The dust managing system DEX gives cleaner cutting with less water usage and slurry.
Built-in automatic filter compensation (SmartCarb™) contributes to continually high power levels and low fuel consumption.
HUSQVARNA K 1260
HUSQVARNA K 3000 VAC / K 3000 WET To see the K 3000 Vac in action, visit www.youtube.com/Husqvarnacp or use the QR-tag:
The most powerful cutter on the market?
Unique electric machines for efficient wet and dry cutting.
■■Active Air Filtrationª is one of the most efficient air filtration
■■The blade rotates forward for more efficient cutting and less
systems on the market. ■■Built-in automatic filter compensation (SmartCarbª) contributes to continually high power levels and low fuel consumption. ■■The Poly-V belt provides better transmission of power, less frequent re-tensioning and greatly extended product life. ■■Effective vibration dampening reduces vibrations to less than 5 m/s² for more convinient operation. ■■DEX (Dust extinguisher system) gives cleaner cutting with less water usage and slurry, thanks to the water saving wet cutting kit.
TECHNiCAL SPECiFiCATiONS
Engine
k 1260
Air-cooled 2 stroke engine
Displacement, cm≥
119
Power, kW *
5.8
strain on the operator. ■■An integrated regulator ensures a constant and sufficient water
flow to bind the dust without creating an excess of water (K 3000 Wet). ■■The unique and easy to install vacuum attachment gives unbeatable dust collection (K 3000 Vac, K 3000 Wet with vac attachment). ■■Allows good vision of the cutting, as the blade is visible even when the Vac attachment is installed (K 3000 Vac, K 3000 Wet with vac attachment). ■■Ergonomic handles in generous distance improve control and reduce the load on the operator. ■■The advanced electronic system Elgardª varies the rpm rate to warn the user of an approaching overload. ■■Electronic SoftStartª allows starting with normal, slow-acting fuses. ■■Generously dimensioned mitre gear provides high durability, minimal power loss and low noise levels.
SPECiFiCATiONS
k 3000 Vac
Electric motor, V Power, W *
k 3000 Wet
230 / 120 / 110
Electric 230 / 120 / 110
2700 / 1800 / 2200
2700 / 1800 / 2200
* Read more on engine power rating at page 73.
* Read more on engine power rating at page 73.
Active Air Filtration™ is one of the most efficient air filtration systems on the market and delivers impressively long service intervals.
The unique and easy to install vacuum attachment gives unbeatable dust collection (K 3000 Vac, K 3000 Wet with vac attachment).
An integrated regulator ensures a constant and sufficient water flow to bind the dust without creating an excess of water (K 3000 Wet).
69
HUSQVARNA MT 85 / MT 65 / MT 15 +
HUSQVARNA S 1435 / S 1445 / S 1465 / S 1485
Ideal for precision cutting in hard materials.
Unique diamond blades for cutting in all materials.
■■Provide cost effective cutting performance.
■■Easy operation even in heavily reinforced concrete.
■■Ideal for occasional use.
■■Higher cutting speed.
■■Specially developed for electric, air and petrol
■■Free cutting with less vibration.
powered hand held cutters.
■■Easy-fit bushing for bore hole expansion from 20 to 25.4 mm. ■■Innovative segment design for efficient cutting, cooling and slurry
evacuation; which increases both cutting speed and service life. ■■New Husqvarna packaging designed to make your choice easier. ■■The new packaging is tailored to ensure to find the right blade for different materials.
MATERIAL
MT SERIES MT 65
MT 15 +
– –
– –
l l
R E I N F oRCE D CoN CR ETE
– – – –
BR I CK
l l l
l l l
g R A NITE MA R BL E CU RED Co NCR ET E
Roo F TIL E A BR AS Iv E M ATER IA L
l l l
A Sp h ALT
l l
–
D U CTIL E IRo N l l l
70
S 1400 DIAgRIp2™ SERIES
MT 85
= Optimal
l l
= Good
l
= Acceptable Ð = Not recommended
S 1445
S 1465
S 1485
l l l
– –
– –
l l l
l l l
l l l
l l l
l l l
l l l
l l
l l l
l l l
l l l
l l
l l
l l
l l l
l l
l l
l l l
– – –
– – –
– – – – – –
– – –
– – – l
S 1435 l l l
l l l
l l
l l
l l l
–
–
Accessories for handheld power cutters.
TRANSPORT BOXES
Specifcally designed for our handheld petrol power cutters. The trolleys make it easy to cut in straight or curved lines, and close to walls and curbstones. They are compact and can be folded, facilitating transportation.
Perfect for both protecting and keeping track of different kind of equipment when moving between worksites. Made of plywood, with metal reinforcement at edges and corners.
MOTOR KIT
fUEL CAN WITH NON-SPILL fILLER
CUTTING TROLLEyS
Comprises a complete crankcase with assembled crankshaft, piston and cylinder. Useful in the event of urgent repairs.
TWO-STROKE OIL WITH HANDy DISPENSING BOTTLE
Complies with the highest JASO / ISO-Global EGD standards. Doses of 2 cl, is needed for mixing with one litre of petrol. Gives the correct oil mixture faster and more easily.
Makes refuelling convenient. Made of tough plastic with a capacity of 6 litres. Approved according to UN regulations.
HUSQVARNA WT 15
WATER HOSE
PRESSURISED WATER TANK
Compact and easy-to-use water tank with electric pump. Has a capacity of 15 litres and allows continual cutting for 45 minutes. Battery-powered, 18.5 V Gardena Li-ion accumulator system.
9 metres long with quick connections and the possibility to join multiple sections together.
Holds 15 litres and comes complete with a 3 metre hose which is connected to the wet cutting kit on the machine.
71
TECHNiCAL SPECiFiCATiONS FOR mT AND S 1400 DiAGRiP2™ SERiES mT 85
mT 65
mT 15 +
S 1435
S 1445
S 1465
S 1485
300, 350
300 , 350
300, 350
300, 350, 400
300, 350, 400
300, 350, 400
300, 350, 400
Blade geometry
Segmented
Joint segments
Segmented
Segmented
Segmented
Segmented
Segmented
Segment shape
Flat
Flat
Turbo
Multi-teeth
Multi-teeth
Multi-teeth
Flat
7
12
10
10 + 4
10 + 3
10 + 3
10 + 2
Diameter, mm
Segment height, mm Number of segments Bore, mm
72
―
―
―
20, 24, 27
20, 24, 27
20, 24, 27
18, 21, 24
20 – 25.4
20 – 25.4
20 – 25.4
20 – 25.4 “Easy-ft”
20 – 25.4 “Easy-ft”
20 – 25.4 “Easy-ft”
20 – 25.4 “Easy-ft”
TECHNiCAL SPECiFiCATiONS FOR POWER CUTTERS
k 760
k 970
k 1260
k 3000 Vac
k 3000 Wet
Electric motor,V
―
―
―
230 / 120 / 110
230 / 120 / 110
Power, kW
3.7
4.8
5.8
2700 / 1800 / 2200 W
2700 / 1800 / 2200 W
Rated current, A
―
―
―
12 / 15 / 20
12 / 15 / 20
―
―
Air-cooled 2-cycle engine Displacement, cm≥
74
94
119
―
―
Power / weight ratio
0.39 / 0.38
0.45 / 0.44 / 0.41
0.42 / 0.40
―
―
9.6 / 9.8
10.6 / 11.0 / 11.8
13.7 / 14.4
―
―
8.9 (incl. Vac attachment)
8.5
Weight, without fuel and cutting equipment, kg
―
―
―
Blade, mm
300 / 350
300 / 350 / 400
350 / 400
350
350
Cutting depth, mm
100 / 125
100 / 125 / 145
125 / 145
119 (incl. Vac unit)
125
―
―
―
―
―
Weight incl. cable without cutting equipment, kg
Elgard™, overload protection “Pulling” rotation Simple blade change Active Air Filtration™
―
X-Torq SmartCarb™
―
―
―
― ―
Air Purge
―
―
DuraStarter™
―
―
―
EasyStart decompression valve
―
―
Poly-V belt
―
―
Sealed transmission
―
―
Reversible cutting arm
―
―
―
―
―
Easy-adjust blade guard
―
―
Wet cutting kit
―
Fuel indicator in the tank
DEX Replaceable arbor bushing Sound power level LWA dB(A)
115
114
117
105
Sound pressure level, dB(A)
101
104
103
95
95
Vibrations front handle equivalent, m / s²
< 2.5 / < 2.5
3.1 / 3.7 / 2.5
3.3 / 3.6
3.5
3.5
Vibrations rear handle equivalent, m / s²
< 2.5 / < 2.5
5.4 / 4.5 / 3.5
3.5 / 4.1
3.5
3.5
= Available
105
― = Not available
NOmiNAL POWER A new machinery directive (2006 / 42 / EC) came into force on January 1, 2010, requiring manufacturers to declare the nominal power of engines, in kilowatts (kW). The power rating of the engines indicated is the average net power output during a normal working situations and fulflling applicable noise regulations (at specifed rpm, see owners manual) of a typical production engine for the engine model measured to SAE standard J 1349 / ISO 1585. Mass production engines may differ from this value. Actual power output for the engine installed in the fnal machine will depend on the operating speed, environmental conditions and other variables.
73
Front mowers
DonÕt spend time and money on unnecessary follow-up trimming. A study that we recently conducted shows that large-scale commercial mowers in general only manage about 65 % of the grass areas they should mow. The remaining 35 % has to be taken care of afterwards by hand, using a walk-behind mower or a trimmer. This means markedly lower productive and more expensive labour, which leads to less revenue. The reason behind this is that most machines haven’t been designed for the complex grass areas that professional landscapers have to deal with on a daily basis. The exception is our new 500 series of compact front mowers. It’s a line-up of machines with many smart solutions that reduce the amount of follow-up trimming to 20 %. Allowing you to be fnished earlier and on the way to the next job.
Husqvarna P 500-series front mowers
Large scale commerical mowers
Trimmers / walk behinds
Trimmers
Walk behinds
How we make you more productive: PERFECT mOWiNG WiTH VERY FiNE CLiPPiNGS
HiGH-PRECiSiON TRimmiNG OF EDGES
ABiLiTY TO REACH UNDER BUSHES AND BENCHES
mOWiNG WHiLE TURNiNG – WiTH A SmALL UNCUT CiRCLE
VERSATiLE USE FOR ALL YEAR ROUND PRODUCTiViTY
SUPERB TRACTiON AND SLOPE STABiLiTY
mOWiNG iN NARROW AND COmPLEx SPACES
WiDE CUTTiNG DECkS FOR ALL GRASS CONDiTiONS
Make turns you never thought were possible. Our front mowers have the smallest uncut circle in the industry. This means that you’ll spend a lot less time trying to get out of complex areas or going back and fourth to mow in tight corners. The secret lies in a unique dog-bone solution that links the front of the mower to the rear axle. When you turn, the wheels in the back swing in underneath the machine. This allows you to make more advanced manoeuvres around corners, trees and bushes. The dog-bone construction automatically adds an all-new level of effciency and security in any terrain. This becomes particularly apparent in slopes, as the dog-bone construction heightens stability by adjusting and lowering the machine’s centre of gravity. For you this means increases traction on the front inner wheel and immediate response – when you need it the most.
“The fact that the rig is normally used to evaluate trucks, buses and construction machinery speaks for itself. These are heavy-duty products – tested for heavy-duty use.” Peter Mejegård, Laboratory engineer.
S AV y TRUCK E H E IK L D E T E ST To test the mechanical construction of our machines, we put them trough extremely tough twists and turns in a ferce test rig – over and over again. We then evaluate every system and component to make sure everything meets our high demands for durability. So, how rough you’ll ever use your Husqvarna front mower, you probably won’t put it trough half of what it’s built to really take.
76
Prepared to help you tackle every challenge. When you invest in machines of this size, versatility is a key factor. Great cutting is, of course, always number one – but having the option to add other functions certainly heighten both use and value of investment. That’s why we’ve equipped our front mowers with a wide range of smart attachments, which make them truly all-year-round machines. You don’t have to use any tools to easily switch between attachments for tidying up leaves and debris, removing snow or clearing overgrown grass and low brushwood. Just to mention a few applications. If you go for a diesel model, there’s an optional dual hydraulic kit that enables you to adjust attachments from the driver’s seat. Also, the machine can be ftted with a spacious cabin with heating and a road kit.
Scan the QR tag or visit www.youtube.com/Husqvarnaworldwide to see the P 500-series in action.
HANDHELD TRimmiNG RESULTS
UNmATCHED COmFORT
No matter which model you choose, you get a front mower that has been designed to minimise your need for follow-up trimming. This is thanks to that the inner workings of the patented cutting deck are elevated further via an exterior that enables state-of-art manoeuvrability. The cutting deck’s low profle and patented 3-positioned height adjustment allows you to reach in under bushes and park benches. And, a slight offset placement of the deck further accentuates corner handling ability, enabling you to mow extremely close to walls and fences.
The P 500-series is packed with ergonomic solutions, focusing just as much on the driver as on performance. The machines have great stability and balance thanks to a low centre of gravity, and their compact size and articulated steering keeps you in full command at all times. To avoid interfering with your driving, the control panel is placed right by your right hand, complemented by ergonomic pedals that ensure instant and precise speed control. And a specially sculpted, highly comfortable driver’s seat makes long days behind the wheel feel a lot shorter.
UNIQUE MOWIN
G
The word unique can sometimes seem like a cliché. But when it comes to the design of the cutting deck to our front mowers, this is really the case. The inside of the robust Combi deck has been stamped out of one solid, 4.5 mm thick piece of metal to optimize airfow, which is the main factor to its high effciency. Smooth arches, without welded seams that cause clogging, force every straw of grass to pass the blades repeatedly. The result is market-leading mulching with nothing but a fnely chopped layer of grass left behind.
77
HUSQVARNA P 525D / P 520D
Highly productive diesel machines for long shifts in very large areas. ■■Powerful 3-cylinder diesel engines from Kubota.
■■No tools are required for the three-point cutting height adjustment.
■■Unique articulated steering concept creates a dynamic weight
■■The cutting deck can be tilted up without tools, for easy cleaning
transfer on the front wheels, which maximises traction in all conditions. ■■The steering concept in combination with AWD and a low centre of gravity provides excellent handling on slopes. ■■Commercial-grade components means uncompromised durability and maximum uptime. ■■Ergonomic operator interface with all controls within easy reach. ■■Heavy-duty square tube ladder frame (4 – 10 mm) with an open design for easy service access. ■■Shaft PTO for maximum efficiency and versatility. ■■The Combi deck makes it easy to switch between mulching and rear discharge.
and maintenance. ■■Extra large tyres and high transport speed (18.5 km / h) (P 525D). ■■The optional cabin and a wide range of attachments makes P 525D/P 520D a versatile year-round machines.
TECHNiCAL SPECiFiCATiONS
P 525D
Engine manufacturer
Kubota
Kubota
18.7 @ 3000
14.5 @ 3000
Net power at preset rpm, kW * Transmission type
E ASy-AC
CESS
It’s easy to put the cutting deck in service position for cleaning and blade service.
78
P 520D
Hydrostatic AWD
Hydrostatic AWD
optional cutting decks
Combi 132, Combi 155
Combi 132, Combi 155
Uncut circle, cm / inch
58 / 22.8
55 / 21.7
* Read more on engine power rating at page 89.
The unique articulated steering delivers superb manoeuvrability and cutting efficiency, which means high productivity.
The machine’s compact design facilitates mowing in cramped and complex spaces, reducing the need for touch-up work with a walk-behind mower or a trimmer.
All-wheel drive with uncompromised traction and slope stability in all conditions.
The low profile front-mounted cutting deck gives unbeatable accessibility under bushes and park benches.
The P 525D / P 520D can be fitted with a cabin for comfortable operation in wet and cold conditions.
79
ATTACHmENTS FOR P 525D / P 520D
BROOM
Shaft PTO driven broom with bevel gear and chain drive. 40 cm broom diameter. Two rear solid support wheels for ground following. Max/min working width 130/120 cm. Requires hydraulic kit and counterweight.
fLAIL MOWER
Shaft PTO driven fail mower with bevel gear. Optional swiveling front pivot wheels. Working width 120 cm. Recommended for use on P 525D only. Requires counterweight.
UTILITy BUCKET
SNOW BLADE
Hydraulic adjustment of angling and emptying. Working width 120 cm. Loading capacity 65 kg. Requires hydraulic kit and counterweight.
Reversable rubber wear. Spring-loaded shock absorber and two skid plates. Max/min working width 130/120 cm. Requires hydraulic kit and counterweight.
fOLDING PLOUGH
Individual hydraulic adjustable blades. Reversable hardox steel wears. Two adjustable skid plates. Max/min working width 140/119 cm. Requires hydraulic kit and counterweight. P 525D with cabin and folding plough.
80
SNOW THROWER
Highly effcient and heavy-duty two-stage snow thrower. Requires hydraulic kit and counterweight. P 525D with cabin and snow thrower.
HyDRAULIC KIT
COUNTERWEIGHT
Two auxiliary hydraulic connections to control front-mounted attachments. Includes valve, switch, hoses with connectors and wires.
Rear counterweight for improved grip and stability. Must be used when operating front-mounted attachments and adding cabin. Total weight 62 kg. Includes 10 5 5 kg stackable, separate weights to be installed to a mounting frame (12 kg).
ROAD KIT
GRAMMER SEAT
We offer accessories needed for driving on public roads. Please check your local legislations to fnd out the requirements in your market.
Deluxe seat with many options for personal settings for optimum ergonomics. Available with or without heated seat cushion. Armrests available as accessories.
CABIN START KIT
Includes cabin structure, front and rear windows, side windows (in the rear), window wiper and front working lights, incl wire harness and electric controls. Requires counterweight.
CABIN yEAR-ROUND KIT
Includes door, side window, heater/defroster, rear-view mirrors and hoses for connecting the heater/defroster.
The cabin pictured is equipped with road kit accessories.
81
Heater/defroster effectively heats up the cabin during cold workdays.
82
The spacious cabin design makes operation very comfortable.
If needed, itâ&#x20AC;&#x2122;s possible to open or remove the side window.
HUSQVARNA P 525D / P 520D WITH CABIN
Extremely useful machines, regardless of weather and time of year. ■■The start kit includes a spacious cabin structure, front and rear
windows, side windows (in the rear), window wiper and front working lights. ■■There’s complementary year-round kit for more comfortable use, including door, side window, heater/defroster and rear-view mirrors. ■■The front and rear windows are made of glass, and the side windows and the door are made of the durable thermoplastic material makrolon.
■■The ceiling features sound absorbing material to keep the noise
level down. ■■If needed, it’s possible to open or remove the side window.
TRULy VERSATI
The ceiling features sound absorbing material to keep the noise level down.
LE USE
P 525D and P 520D with cabin are truly versatile machines. A wide range of attachments keeps you busy and productive basically all year round – even during traditional low season periods. Check out all the attachments on pages 80 – 81.
83
HUSQVARNA P 524
Compact petrol-machine that offers superior trimming in complex areas. ■■Powerful 2-cylinder engine from Kawasaki.
■■Easy-access lever for central cutting height adjustment.
■■Unique articulated steering concept creates a dynamic weight
■■The cutting deck can be tilted up without tools, for easy cleaning
transfer on the front wheels, maximizing traction in all conditions. ■■Class-leading handling on slopes, thanks to a combination of the steering concept, AWD and a low centre of gravity. ■■Commercial-grade components for uncompromised durability and maximum uptime. ■■Ergonomic operator interface with all controls within easy reach. ■■Heavy-duty square tube ladder frame (4–10 mm) with an open design for easy service access. ■■The Combi deck makes it easy to switch between mulching and rear discharge.
and maintenance. ■■A wide range of attachments makes the P 524 a versatile
all-year round machine.
TECHNiCAL SPECiFiCATiONS
Engine manufacturer
P 524
Kawasaki
Net power at preset rpm, kW * Transmission type
13.9 @ 3000 Hydrostatic AWD
optional cutting decks
Combi 112, Combi 122
Uncut circle, cm / inch
50 / 19.7
* Read more on engine power rating at page 89.
The grass is cut into small pieces that quickly decompose and return to the lawn as natural fertilizer.
84
The compact size in combination with the unique articulated steering makes it easy to manoeuvre the machine in narrow spaces and tricky areas.
The tilting hood and easy-access service points make maintenance and servicing easy.
ATTACHmENTS FOR P 524
SNOW THROWER
Highly effective, heavy-duty single-stage thrower with a working width of 100 cm.
SNOW BLADE
Rugged steel blade with steel blade edge.
fLAIL MOWER
Robust, reliable fail mower for rough areas with overgrown grass and low brushwood. Equipped with a hard-wearing mitre gear for maximum product life. BROOM
Rotating broom for sweeping up leaves, snow etc. Can be angled to either side.
fOLDING PLOUGH GRAMMER SEAT
Deluxe seat with many options for personal settings for optimum ergonomics. Available with and without electric heating. Armrests available as accessories
Compact and fexible folding plough in heavy-duty steel performance. Mechanical adjustment of the blades makes it usable as an V-plough, point plough or diagonal plough. Equipped with rubber scrape blade.
85
ACCESSORiES FRONT mOWERS
N ew !
ALL-WEATHER JACKET, TECHNICAL, WITH GORE-TEX ® LAMINATE
Jacket made of high quality fabric with reinforcements on extra exposed areas. GORE-TEX¨ laminate provides excellent protection against rain and wind. Breathable fabric, ventilation zippers under the arms and ventilation yoke on the back keep you comfortable at all times. Pockets with zippers are easy to reach and the extended back part prevents a gap between jacket and trousers. The jacket has pre-bent arms for great movability and refective logos for good visibility. 580 68 80-xx. Not available in UK.
ALL-WEATHER TROUSERS, TECHNICAL, WITH GORE-TEX ® LAMINATE
High quality, durable trousers with GORE-TEX¨ laminate for superb protection against rain and wind. Breathable fabric keeps you comfortable and reinforcements on extra exposed areas enable you to work in demanding environments. Pre-bent knees provide excellent ergonomics and refective tape and logos ensure good visibility. 580 68 79-xx. Not available in UK.
SOfTSHELL JACKET
THERMAL VEST
Wind and water repellent, made of a comfortable and stretchy membrane with a soft feece inner. Can be worn over other clothing or alone. Cordura¨ reinforcement over shoulders, on back of arms, and on the sides. Sleeves are precurved for higher movement. Lover parts of sleeves are adjustable and have Velcro fastenings. Has four pockets with zipper at front and two inside pockets. 577 25 30-xx
Made of 100 % water repellent polyester lined with feece. Can be worn over jacket or sweater to keep you warm without reducing the freedom of movement. Has four front pockets with zip fastenings. Back is extended with adjustable elastic at the waist and at the bottom of the back. The collar is high and closes tight. 577 25 29-xx
Work efficiently in heavy rain and strong winds. WeÕve designed our new rain clothes to enable you to continue working even in the most extreme weather conditions. The jacket and trousers are extremely durable, comfortable and packed with smart ergonomic features. Every single detail has one and the same purpose: to keep you focused on the job ahead of you, regardless of how rainy and windy the weather is forecast to be.
Breathable fabric with GoRE-TEX® laminate keeps you comfortable at all times.
86
Pockets with zippers are easy to reach while you’re working.
The lower parts of the legs are reinforced and the knees are prebent for durable, convenient work.
GLOVES, CLASSIC LIGHT
Slim, comfortable gloves with goat leather palms (to withstand moisture) and strong jersey fabric on the backsides. The fngers are reinforced for extra durability. 579 38 00-xx
Oils that give good performance.
PROTECTIVE BOOTS, TECHNICAL
Made of high quality leather and nylon mesh. Composite toecaps keeps the boots low in weight. They are 100 % waterproof yet breathable thanks to Sympatex® membrane. Front parts offer extra rubber protection. Perfect for both work and leisure. 575 35 47-xx ENGINE OIL, WP 4T 10W / 40
PROTECTIVE GLASSES
Can be worn under a visor or on their own. Yellow tinted lenses (544 96 37-02) give improved vision in dark conditions. Grey tinted lenses (544 96 37-03) with UV protection improve vision in sunny conditions. Goggles (544 96 39-01) developed for people who wear eyeglasses, anti-fog treated and durable against impact. Clear 544 96 37-01.
Developed for 4-stroke machines. Provides easy starting at low temperatures and perfect lubrication at all conditions. Has a low consumption and prevents the engine from fouling. Meets the requirements of API SL (CF), ACEA A3 (B3). 0.08 litres, 531 00 92-71. 1.4 litres, 577 41 97-02. ENGINE OIL, SAE 10W-50
Fully synthetic, specially developed for the transmission in our AWD vehicles. It’s extremely temperature stable and suitable for both cold and warm environments. Fulflls API SM, ACEA A3 / B4, API GL-1&4. 4 litres, 578 03 71-04.
BATTERy STATUS INDICATOR
Connected to the battery it quickly shows if the battery needs to be charged. To charge the battery, connect the charger BC 0.8 to the status indicator.
BATTERy CHARGER BC 0.8
Charges all 12V lead-acid batteries from 1.2 – 32 Ah and is suitable for maintenance charging up to 100 Ah. It’s fully automatic to maximize performance and battery life. Is used together with the battery status indicator.
N ew !
COVERS
Full size cover for ride-on mowers. Made of water resistant nylon. Has ventilation holes and adjustable drawstring at the lower end. 505 63 08-70
LOADING RAMPS
RIDE-ON fUEL CAN
15 litres fuel can for wheeled machines that offers an innovative way of refuelling. Three uniquely placed, ergonomic grips facilitate lifting, carrying and refuelling. The spout has an auto-stop function that prevents spill and fooded tanks. And a mechanical lock prevents opening and leakage during transport.
Made of sea water resistant aluminium with slip resistant surface. 505 69 90-40 – 200 5■1500 5■35 mm, max load of 450 kg /pair. 505 69 90-42 – 200 5■2000 5■50 mm, max load of 450 kg /pair. 505 69 90-44 – 260 5■1500 5■60 mm, max load of 1000 kg /pair. 505 69 90-45 – 260 5■2000 5■60 mm, max load of 1000 kg /pair. 87
ATTACHmENT GUiDE FOR P 525D / P 520D
mODEL ATTACHmENT
ART. NO
CABiN START kiT
966 75 46-01
CABiN YEAR-ROUND kiT
966 75 47-01
CABiN ROAD kiT
966 75 48-01
WORkiNG LiGHTS REAR
966 79 16-01
BeACOn lighT (CABin)
966 79 17-01
GRAmmER PRimO m SEAT
967 00 84-01
GRAmmER PRimO m SEAT, HEATED
967 00 84-02
GRAmmER ARmREST kiT, RiGHT
965 89 68-01
GRAmmER ARmREST kiT, LEFT
965 89 70-01
SNOW BLADE
966 75 43-01
SNOW THROWER
966 73 44-01
UTiLiTY BUCkET
965 99 74-01
FLAiL mOWER
967 02 43-01
FOLDiNG PLOUGH
965 99 72-01
BROOm
966 75 44-01
ROTATing BeACOn lighT (ROPS)
966 79 15-01
FRONT HEADLiGHTS*
966 79 12-01
POSiTiOn And TuRning lighTS ReAR (START KiT)
966 79 09-01
LOW SPEED VEHiCLE TRiANGLE
966 79 11-01
POSiTiON AND TURNiNG LiGHTS FRONT
966 79 10-01
NUmBER PLATE kiT
966 79 13-01
mAx SPEED DECAL*
966 79 14-01
PRiCE
P 520D
P 525D
ADDiTiONAL PARTS NEEDED COUNTERWEiGHT
966 75 49-01
CONTROL BOx
966 79 08-01
CABiN HEATER ADAPTOR P 525D
967 14 48-01
CABiN HEATER ADAPTOR P 520D
966 80 24-02
HYDRAULiC kiT
966 75 45-01
= Requires additional attachments and/or parts. For full technical specifications, please visit the international support site. * Not available in UK.
88
TOTAL:
CALCULATE
✔
TECHNiCAL SPECiFiCATiONS FOR FRONT mOWERS
Engine manufacturer
P 525D
P 520D
P 524
Kubota
Kubota
Kawasaki FX Series V-Twin
Engine name
D1105
D 902
Engine type
Diesel horisontal axle
Diesel horisontal axle
FX691V
18.7 @ 3000
14.5 @ 3000
13.9 @ 3000 726
Net power at preset rpm, kW Cylinder displacement, cm≥
1123
898
Cylinders
3
3
2
Sound pressure level at operators ear, dB(A)*
92
88
88
Guaranteed sound power level, LWA, dB(A)* *
105
103
104
Vibration level steering wheel * * *
1.7
1.7
1.7
Vibration level seat * * *
0.7
0.7
0.7
Liquid
Liquid
Air
Engine cooling Generator, A
40
40
20
Battery,V / Ah
12 / 62
12 / 62
12 / 24
Air flter type
Heavy-Duty Canister Style
Heavy-Duty Canister Style
Heavy-Duty Canister Style
Fuel tank volume, litre
25
25
22
Oil tank volume (incl oil flter), litre
3.3
3.3
2.1 Hydrostatic AWD
Transmission type
Hydrostatic AWD
Hydrostatic AWD
Transmission manufacturer
Kanzaki
Kanzaki
Kanzaki
Transmission model
KTM 23
KTM 23
KTM 23
Speed forward, min – max, km / h
0 – 18
0 – 15
0 – 13
Speed reverse, min – max, km / h
0 – 11
0 – 12
0–9
58 / 22.8
55 / 21.7
50 / 19.7
Uncut circle, cm / inch optional cutting decks
Combi 132 / Combi 155
Combi 132 / Combi 155
Combi 112 / Combi 122
Cutting methods
Mulching / Rear discharge
Mulching / Rear discharge
Mulching / Rear discharge
Deck thickness, mm Cutting height, min – max, mm Cutting height steps Blade engagement RoPS Power steering All -Wheel Drive (AWD) oil cooler Hydraulic equipment lift Service position Hour meter
4.5
4.5
4
25 – 127
25 – 127
25 – 75
7
7
7
Electric clutch
Electric clutch
Electric clutch
• • • • • •
• • • • • •
―
• • • • •
Digital
Digital
Digital
12V outlet
•
•
Cup holder
―
―
• •
Frame construction type
Ladder frame
Ladder frame
Ladder frame
Full suspension, arm rests
Full suspension, arm rests
Premium
•
•
•
Tyre size, front, inch
20 × 10 – 10
18 × 8.5 – 8
18 × 8.5 – 8
Tyre size, rear, inch
Seat type Hinged armrests
20 × 10 – 10
18 × 8.5 – 8
18 × 8.5 – 8
Wheelbase, cm / inch
106 / 41.7
106 / 41.7
100 / 39.4
Ground clearance, mm / inch
140 / 5.5
105 / 4.1
105 / 4.1
Base machine, length, cm / inch
211 / 83.1
207.5 / 81.7
205 / 80.7
Base machine, width, cm / inch
114 / 44.9
111 / 43.7
98 / 38.6
Base machine, height, cm / inch
133 / 52.4 (RoPS down)
129 / 50.8 (RoPS down)
115 / 45.3
675
600
385
Weight (excluding cutting deck), kg
= Available ― = Not available. * Sound pressure level according to ISO 5395 an EN 836. Reported data for sound pressure level has a typical statistical dispersion (standard deviation) of 1.2 dB(A). ** Noise emissions in the environment measured and calculated as guaranteed sound power level according to EC-Directive 2000/14/EC. The guaranteed sound power level includes variation in production as well as variation from the test code with 1 Ð 2 dB(A). Noise emissions and sound pressure level can be influenced by the cutting unit used. Declared figures are for the machine equipped with the most used cutting unit for the specific mower model. For further information, see the OperatorÕs manual. *** Vibration level according to ISO 5395 and EN 836. Reported data for vibration has a typical statistical dispersion of 0.2 m/s² (steering wheel) and 0.8 m/s² (seat).
NOmiNAL POWER A new machinery directive (2006 / 42 / EC) came into force on January 1, 2010, requiring manufacturers to declare the nominal power of engines, in kilowatts (kW). The power rating of the engines indicated is the average net power output during a normal working situations and fulflling applicable noise regulations (at specifed rpm, see owners manual) of a typical production engine for the engine model measured to SAE standard J 1349 / ISO 1585. Mass production engines may differ from this value. Actual power output for the engine installed in the fnal machine will depend on the operating speed, environmental conditions and other variables.
89
Lawnmowers
Walk-behind machines that make you stay ahead. Our lawnmowers have many unique, smart features that help you achieve productive lawn mowing. They are powerful and compact â&#x20AC;&#x201C; perfect for smaller and tricky grass areas. A robust design makes them reliable workmates for many years. And, not the least, several ergonomic solutions allow you to keep the pace and stay effcient even during longer shifts.
Powerful, sophisticated Honda engines drive our machines. The engines have solutions that significantly lower noise as well as exhaust emissions. The combination of smart functions and heavyduty design give you easy service and many years of reliable use.
Superb cutting in all situations. Our lawnmowers offer outstanding productivity, day after day. The main reason for this is the roomy design of the cutting decks that enables higher volumes of grass to be cut. This is a major contribution to the models well-known and appreciated performance. The deck design even makes it possible to get a great cutting result even on damp surfaces.
We’ve paid a lot of attention at selecting the right material for the mowers. Not at least when it comes to the cutting decks. They are all cast in onepiece aluminium, which gives optimal torsional rigidity and expands service life. Aluminium is a light material that doesn’t rust and it’s solid enough for tough and demanding operation for a long time.
ExPERiENCE EFFiCiENT mOWiNG AND GREENER LAWNS Our lawnmowers are mulching machines, which means that the grass is cut twice and fnely chopped. The cuttings are then scattered on the lawn surface, where they quickly break down and nourish the soil. By using the grass cuttings as natural fertiliser, vital nutrients are replaced in the soil. Mulching contributes to regularly fertilising the lawn, which makes the grass grow stronger and healthier. The lawn takes on a lusher, thicker, and glossier fnish. This means less chance for weeds, moss and dandelions. The denser coverage also shades the soil and improves moisture retention. To summarize, you get fnely mowed, greener lawns – and save time and labour since you don’t have to deal with the cuttings.
HUSQVARNA LB 553S
Efficient mulching mower for small and mid-sized areas. ■■The highly specified Honda engine is powerful, reliable and
easy to start. ■■The cutting deck is cast in one-piece aluminium for optimum torsional rigidity and service life. ■■Effective front-wheel drive makes the mower easy to manoeuvre. ■■Specially developed cutting deck with large volume for effective mulching. ■■Spring-assisted, central adjustment of the cutting height facilitates your work. ■■Vibration-dampened and folding handle with all controls within comfortable reach. ■■Aluminium wheel rims with double ball bearings and rubber tyres offer increased operational reliability.
Effective front-wheel drive makes the mower easy to manoeuvre.
92
TECHNiCAL SPECiFiCATiONS
Engine
LB 553S
Honda
Cylinder displacement, cm≥
160
Net power at preset rpm, kW * Cutting width, cm / inch
2.8 @ 2900 53 / 21
Weight, kg
35
* Read more on engine power rating at page 94.
Specially developed cutting deck with large volume for effective mulching.
Strong, easy-to-start and reliable Honda engines provide great power.
HUSQVARNA LB 553S e
Reliable mulching mower for tough professional use. ■■The highly specified Honda engine is powerful, reliable and
easy to start. ■■Effective front-wheel drive contributes to great manoeuvrability. ■■The cutting deck is cast in one-piece aluminium for optimum torsional rigidity and service life. ■■Spring-assisted, central adjustment of the cutting height facilitates your work. ■■Fully anti-vibrated and folding handle with all controls within comfortable reach. ■■The handle is side-adjustable, which makes it easy to mow close to walls and hedges. ■■Aluminium wheel rims with double ball bearings and rubber tyres offer increased operational reliability.
Heavy-duty, cast aluminium chassis means increased strength and many years of troublefree use.
TECHNiCAL SPECiFiCATiONS
Engine
LB 553S e
Honda
Cylinder displacement, cm≥
160
Net power at preset rpm, kW * Cutting width, cm / inch
2.8 @ 2900 53 / 21
Weight, kg
36.7
* Read more on engine power rating at page 94.
Spring-assisted, central adjustment of the cutting height facilitates your work.
The handle is side-adjustable, which make it easy to mow close to walls and hedges.
93
TECHNiCAL SPECiFiCATiONS FOR LAWNmOWERS
LB 553S
LB 553S e
Engine manufacturer
Honda
Honda
Engine type
oHC
oHC
Engine name
GCV160
GCV160
Cylinder displacement, cm≥
160
160
2.8 @ 2900
2.8 @ 2900
Engine lubrication type
Splash
Splash
Fuel tank volume, litres
0.9
0.9
Drive system
Self-propelled, single speed
Self-propelled, single speed
Drive wheels
Front
Front
Speed, km / h
4.8
4.8
Aluminium
Aluminium
BioClip®
BioClip®
Net power at preset rpm, kW
Cutting deck material Cutting methods Cutting width, cm / inch
53 / 21
53 / 21
Cutting height, min – max, mm
27 – 65
27 – 65
Cutting height steps Cutting height adjustment Wheel size, front / rear, mm / inch Rims, material Ball beared wheels Handle type
5
5
Central, spring-assisted
Central, spring-assisted
203.2 / 203.2 / 8 / 8
203.2 / 203.2 / 8 / 8
Aluminium
Aluminium
•
•
Anti-vibrated
Anti-vibrated
•
•
Sound level, dB(A)
97
97
Sound pressure level at operators ear, dB(A)*
82
82
•
•
―
•
•
•
Throttle control
Soft grip Handle height adjustment Foldable handle Side adjustable handle
―
•
Weight, kg
35
36.7
= Available ― = Not available * Equivalent sound pressure level, as per ISO 22868, is calculated as the time – weighted energy sum for the sound pressure levels at various operational states. Typical variation for equivalent sound pressure level is a standard deviation of 1 dB(A).
NOmiNAL POWER A new machinery directive (2006 / 42 / EC) came into force on January 1, 2010, requiring manufacturers to declare the nominal power of engines, in kilowatts (kW). The power rating of the engines indicated is the average net power output during a normal working situations and fulflling applicable noise regulations (at specifed rpm, see owners manual) of a typical production engine for the engine model measured to SAE standard J 1349 / ISO 1585. Mass production engines may differ from this value. Actual power output for the engine installed in the fnal machine will depend on the operating speed, environmental conditions and other variables.
94
Copyright Š 2014 Husqvarna AB (publ). All rights reserved. Husqvarna and other product and feature marks are trademarks of the Husqvarna Group as displayed at www.international.husqvarna.com
Stendahls. 585 57 55-25 UK.
Husqvarna UK Limited, Preston Road, Aycliffe Business Park, Newton Aycliffe, County Durham, DL5 6UP. Telephone 0844 243 5263 Email info@husqvarna.co.uk www.husqvarna.com/uk