HCP_Cat_2012_AU by Husqvarna Construction

HUSQVARNA CONSTRUCTION PRODUCTS 2012

HUSQVARNA CONSTRUCTION PRODUCTS Husqvarna Australia Pty Ltd, 29 Kinkaid Ave, North Plympton, Adelaide, South Australia, 5037. Tel:+61 (0)8 8375 1000, Fax +61 (0)8 8371 0990. www.husqvarnacp.com Copyright ÂŠ 2012 Husqvarna AB (publ). All rights reserved. Husqvarna and other product and feature marks are trademarks of the Husqvarna Group as displayed at www.international.husqvarna.com We reserve the right to make changes in technology and specifications without prior notice.

2012 HUSQVARNA CONSTRUCTION PRODUCTS

Husqvarna Construction Products is the world leader when it comes to equipment and diamond tools for the construction and stone industry. We provide users all over the world with the most efficient and reliable equipment there is. By doing this we ensure that our professional users will be proud of a job well done. And proud professionals are our best reward.

Contents. Service, environment and safety, Husqvarna support and website

Wall sawing Diamond tools for wall sawing

8 32

Wire sawing Diamond tools for wire sawing

38 48

Flat sawing Diamond tools for flat sawing

52 74

Early entry sawing

Surface preparation Diamond tools for surface preparation

92 114

Drilling Diamond tools for drilling

132 166

Hand held power cutting Diamond tools for hand held power cutting

176 224

Diamond tools for angle grinders

236

Masonry and tile sawing Diamond tools for masonry and tile sawing

244 258

Remote demolition

264

Protective equipment

280

Service and troubleshooting of diamond blades Service and troubleshooting of diamond drill bits

284 288

We reserve the right to make changes in technology and specifications without prior notice.

First a few words about our offer to you.

Efficiency and ergonomics.

Strength and support.

Working with heavy machinery is tough on your body. That’s why we develop machines that are lighter, easier and thereby safer to handle. Machines with low vibration levels, ergonomically designed handles and well-positioned controls, as well as many other technical solutions and smart details that make the day-to-day job easier for construction workers all over the world. For us it’s not just about ergonomics, it’s also efficiency – technical platforms and solutions that eliminate unnecessary strain, before and during the job. With this approach, the machines help boost your competitiveness and profitability.

With our deep knowledge of the industry, our global experience and our extensive R&D programme, we offer you one of the market’s strongest and most efficient product ranges. And through our sales companies, salespeople and retailers you get professional service and support. Production takes place in some ten factories worldwide, and our products are subject to rigorous testing before they are released on the market.

Creative solutions. All successful product development must be user-focused. Cooperation with professional users is what drives our product development forward. Their requirements inspire us towards new and creative solutions. A good example is the low-emission engine with X-Torq. This is a technology developed for two-stroke engines, providing more power, better fuel economy and reduced emissions by up to 75 % compared to a conventional two-stroke engine. Good for the environment and good for the user. Another solution that you can read more about in the catalogue is DEX, our newly developed dust management system, which efficiently minimizes the

amount of dust particles around the user. Our product portfolio contains innovative and exciting new systems which allows you to combine machines, tools, power packs and accessories into your own preferred configuration. Our R&D department will continue to develop creative technical solutions. Solutions that challenge our creativity and can stimulate yours. More diamond tools will for instance be equipped with our latest diamond tool technology, Diagripâ&#x201E;˘, which yields superior cutting capacity, longer life and a smooth, rapid cut.

Let our QR-tags enhance your product experience! On some of the pages in this catalogue you will find small black and white squares called QR-tags. Each tag is linked to a selected page on our new mobile website, where you can see useful and exciting content, such as product instruction movies, directly in your touch /smart phone. To use QR-tags, you need a touch /smart phone with camera and QR reader software (app) installed. If it’s not already installed in your phone, visit App Store, Android Market or the corresponding site for your phone. Search for “QR scan”, “QR reader” or similar, and download one of the QR reader apps available for your phone. Install the app, start it and point the camera at the QR-tag. The linked page will automatically appear on the screen.

Knowledge and commitment. To make your job easier we don’t just offer the market’s most efficient technical solutions in terms of machinery and diamond tools. Our support goes further than that. Husqvarna’s global organization includes a number of knowledgeable and committed salespeople, service technicians and product experts who can help you with the right equipment and prompt service.

Husqvarna Construction Products on the Internet. We also have an extensive website where you can find a lot of information on our machines and tools. It includes complete product information with technical specs, service materials, user manuals, tool guides and much more. Thereâ&#x20AC;&#x2122;s also information on the company and your local organization with service points and retailers.

www.husqvarnacp.com

Wall saWing

Application overview

Range overview

Benefit overview

Husqvarna wall saws

Husqvarna power packs

Technical specifications for wall saws

Technical specifications for power packs

Diamond tools for wall sawing

A Husqvarna wall saw is ideal for all types of openings in almost all building materials, such as brick and reinforced concrete. Even before you start working, you discover one of the biggest advantages: Husqvarnaâ&#x20AC;&#x2122;s wall saws are very easy to handle, meaning efficient work with a minimum of set up time. Every detail is carefully thought through and built in complete systems, from the power packs to the wall mounting brackets, tracks, saw carriages and blade guards.

Wall sawing â&#x20AC;&#x201C; application overview.

Door openings. The undercut is made by flush cutting.

Window openings.

Openings for ventilation. To make cuts adjacent to walls, use flush cutting.

Sawing of steps or other uneven contours.

Bevel cutting. Our unique universal mounting enables you to make cuts at a steplessly adjustable angle.

Flush cutting.

Wall sawing – range overview. APPLICATIONS ■

■

■ ■

PRODUCT

TECHNICAL SPECIFICATIONS

PAGE

Cutting in deep reinforced concrete, bricks and other building materials, up to 730 mm thickness. All kinds of sawing including stair cutting, bevel cutting and flush cutting. All kinds of openings such as windows, doors and ventilation.

Husqvarna Ws 482 HF.

Spindle output, max Diamond blade Cutting depth, max Weight saw head

19 kW 600 –1600 mm 730 mm 28.3 kg

Cutting in reinforced concrete, bricks and other building materials, up to 530 mm thickness. All kinds of sawing including stair cutting, bevel cutting and flush cutting. All kinds of openings such as windows, doors and ventilation.

Husqvarna Ws 440 HF.

Spindle output, max Diamond blade Cutting depth, max Weight saw head

13 kW 600 –1200 mm 530 mm 25.0 kg

Deep cutting in reinforced concrete, bricks and other building materials, up to 730 mm thickness. All kinds of sawing including stair cutting, bevel cutting and flush cutting. All kinds of openings such as windows, doors and ventilation.

Husqvarna Ws 463.

Flow Pressure Spindle output, max Diamond blade Cutting depth, max Weight saw head

65 l /min 230 bar 20 kW 600 –1600 mm 730 mm 22.0 kg

Cutting in reinforced concrete, bricks and other building material, up to 400 mm thickness. Lighter applications like sawing brick walls. A wall saw for surroundings where access to maintenance is limited.

Husqvarna Ws 325.

Flow Pressure Spindle output, max Diamond blade Cutting depth, max Weight saw head

36– 45 l /min 220 bar 6.3 kW 700 –930 mm 400 mm 24.0 kg

Power packs – range overview. APPLICATIONS ■

■

PRODUCT

TECHNICAL SPECIFICATIONS

PAGE

Electric power pack for electric products like the Husqvarna WS 482 HF. The unit is suitable for applications where easy transportation is requested both to and around the worksite. The unit can be used in surroundings where water usage should be kept at a minimum.

Husqvarna PP 480 HF.

Power output Weight

20 kW 23.4 kg

Electric power pack for electric products like the Husqvarna WS 440 HF. The unit is suitable for applications where easy transportation is requested both to and around the worksite. The unit can be used in surroundings where water usage should be kept at a minimum.

Husqvarna PP 440 HF.

Power output Weight

15 kW 18.0 kg

APPLICATIONS ■ ■

■

PRODUCT

TECHNICAL SPECIFICATIONS

PAGE

Flexible electric power pack for hydraulic products. For high-performance equipment such as Husqvarna WS 463 and CS 2512.

Husqvarna PP 455 E.

Pressure Flow Power output Weight including oil

230 bar 65 l /min 25 kW 139 kg

Electric power pack for hydraulic products like the Husqvarna WS 325 wall saw, DM 406 H drill motor, K 3600 MK II and K 2500 power cutters. For surroundings where access to maintenance is limited.

Husqvarna PP 325 E.

Pressure Flow Power output Weight including oil

140 bar 40 l /min 9.3 kW 95 kg

Professional power puts you in charge.

Small distance between track and blade gives a straight cut generating less wear on both saw and blade.

The quick connection makes it easy to attach the saw unit to the carriage. First, you press the saw unit into place on the carriage, and then you attach the unit using the locking device.

The smart and flexible universal mounting is a fairly revolutionary accessory that saves energy and time. Because the mounting pivots when positioned on the wall, it is simple to reposition the track during cutting. The mounting also allows you to easily carry out bevel cutting and stair cutting at a variety of angles.

Your wall saw can be combined with the CS 10, transforming it into a perfect wire saw.

The new blade guard is extremely durable, light and easy to install. Symmetric track makes it possible to cut on both sides of the track.

The blade’s direction of rotation is remote controlled and can easily be changed, so the water spray goes in the desired direction.

The WS 482 HF has one of the market’s most powerful engines, delivering an impressive 19 kW at 32 A. The two-speed water-cooled gearbox produces a wide rpm range and has the capacity to handle blades with diameters up to 1600 mm. This makes the saw suitable for many different applications.

Built on a modular system, the saws are easy to carry thanks to the optimised weight of each module.

The new wireless remote control is ergonomic and easy to use – both with gloves and without. The operations are performed using just a few buttons. With the 3.5-inch colour display it’s easy to see all information during operation. Equipped with shoulder strap as standard. As an option an ergonomically curved aluminium bar that the operator wears over the shoulder is available.

Husqvarna wall sawing system – Ws 482 HF.

Benefits.

The powerful water-cooled electric motor generates an impressive 19 kW to the spindle at 32 A and 9 kW at 16 A. ■ The two-speed gearbox delivers a wide rpm range, so it can handle blades up to 1600 mm. ■ The spindle has variable rpm control which gives optimized speed for each cutting application and is operated by a wireless remote control. ■ The wireless remote control has an ergonomic design with a large and clear display, which shows the current performance of the saw. ■ The blade’s direction of rotation can be adjusted by the wireless remote control, which gives water spray in the desired direction. ■ Symmetric track and carriage enable sawing on both sides of the track. ■ Modular design, easy to transport and install. ■

Husqvarna WS 482 HF

Use the QR-tag to check out more about WS 482 HF.

Husqvarna PP 480 HF

Technical specifications – Ws 482 HF. Spindle output, max Diamond blade Cutting depth, max Weight saw head

19 kW 600 –1600 mm 730 mm 28.3 kg

More technical specifications on page 30.

Technical specifications – PP 480 HF. Power output Weight

20 kW 23.4 kg

More information on PP 480 HF on page 24.

applications.

Product specifications.

Cutting in deep reinforced concrete, bricks and other building materials, up to 730 mm thickness. ■ All kinds of sawing including stair cutting, bevel cutting and flush cutting. ■ All kinds of openings such as windows, doors and ventilation.

WS 482 HF / PP 480 HF, 400 /480 V, 4 pin, Ø 1000 mm

■

Supplied with 4 wall mounting brackets, track coupling, oil, blade guard, connectable track with saw trolley, tool kit, track holder and blade guard guide.

Diamond tools. MATERIAL R E I N F O R C E D C O N C R E TE , H A R D R E I N F O R C E D C O N C R E TE , M E D I U M R E I N F O R C E D C O N C R E TE , S O F T BRICK

Read more on page l = Optimal l = Good l = Acceptable

– = Not recommended

966 41 75 04

W 1220

W 1230

l l l l

Blade guard.

Blade guard for flush cutting.

Blade guard holder.

Mounting bracket, universal.

Mounting bracket, standard. m

Tool kit, complete set of wrenches, allen keys and sockets.

Cleaning brush.

Blade flange hub. k

Coupling link for joining tracks together. n

Measure pin to mounting bracket. o

Grease gun.

Accessories. Blade guard, 800 mm Blade guard, 1000 mm Blade guard, 1240 mm Blade guard, 1600 mm Blade guard for flush cutting, 800 mm Blade guard for flush cutting, 1000 mm Blade guard for flush cutting, 1240 mm Blade guard for flush cutting, 1600 mm Blade guard holder Saw carriage Track, 1.2 m Track, 2.0 m Track, 2.2 m Track holder Blade flange hub, bore 60 mm Mounting bracket, universal Mounting bracket, standard Coupling link Measure pin Tool kit Cleaning brush Grease gun Harness

Saw carriage. g

Track holder for eaiser track mounting.

Track in 3 different lengths.

A A A A b b b b c d e e e f g h i j k l m n o

Curved aluminium bar, worn over one shoulder, for the remote control.

Equipment for wire sawing. 505 15 29-01 505 15 30-01 505 15 31-01 504 00 54-01 504 00 50-01 504 00 52-01 504 00 53-01 504 00 55-01 505 18 74-01 505 22 69-01 531 11 30-45 531 11 30-46 531 11 30-47 531 11 32-48 574 82 95 02 531 11 32-00 531 11 32-46 531 11 32-47 531 11 32-65 501 37 52-01 531 11 32-68 531 11 91-08 510 28 00-01

P CS 10

966 56 57 01

Your wall saw can be combined with the CS 10, transforming it into a perfect wire saw. Read more on page 46.

Husqvarna wall sawing system – WS 440 HF. Applications.

Cutting in reinforced concrete, bricks and other building materials, up to 530 mm thickness. ■ All kinds of sawing including stair cutting, bevel cutting and flush cutting. ■ All kinds of openings such as windows, doors and ventilation. ■

Husqvarna WS 440 HF

Benefits.

Water-cooled electric motor gives constant high power to the spindle over a wide rpm range for faster and more efficient sawing. ■ The spindle has variable rpm control which gives optimized speed for each cutting application and is operated by a wireless remote control. ■ Both feeding motors and blade drive motor can be operated individually at maximum power for more efficient and faster sawing. ■ The blade’s direction of rotation can be adjusted by the wireless remote control, which gives water spray in the desired direction. ■ Symmetric track and carriage enable sawing on both sides of the track. ■

Use the QR-tag to check out more about WS 440 HF.

Husqvarna PP 440 HF

Technical specifications – WS 440 HF. Spindle output, max Diamond blade Cutting depth, max Weight saw head

13 kW 600 –1200 mm 530 mm 25.0 kg

More technical specifications on page 30.

Technical specifications – PP 440 HF. Power output Weight

The WS 440 HF is a compact, user-friendly and ergonomic saw that is easy to transport.

15 kW 18.0 kg

More information on PP 440 HF on page 25.

Product specifications. WS 440 HF / PP 440 HF, 400 V, 4 pin, Ø 800 mm

966 86 83 03

Supplied with 4 wall mounting brackets, track coupling, oil, blade guard, connectable track with saw trolley, tool kit, track holder and blade guard guide.

The powerful, water-cooled electric motor produces an impressive 13 kW to the spindle, even though the saw weighs just 25 kg.

Diamond tools. MATERIAL

W 1210

R E I N F O R C E D C O N C R E TE , h A R D R E I N F O R C E D C O N C R E TE , M E D I uM R E I N F O R C E D C O N C R E TE , s O F T BRICK

Read more on page l = Optimal l = Good l = Acceptable

l l l l

– = Not recommended

Blade guard.

Blade guard for flush cutting.

Blade guard holder.

Mounting bracket, universal.

Mounting bracket, standard. m

Tool kit, complete set of wrenches, allen keys and sockets.

Cleaning brush.

Blade flange hub. k

Coupling link for joining tracks together. n

Measure pin to mounting bracket. o

Grease gun.

Saw carriage. g

Track holder for eaiser track mounting.

Track in 3 different lengths.

A A A A b b b b c d e e e f g h i j k l m n o

Curved aluminium bar, worn over one shoulder, for the remote control.

P CS 10

966 56 57 01

Your wall saw can be combined with the CS 10, transforming it into a perfect wire saw. Read more on page 46.

Husqvarna wall sawing system – Ws 463.

Benefits.

Very powerful hydraulic wall saw, 20 kW, for heavy sawing. ■ Three-speed hydraulic gearbox for optimal speed depending on materials, blade diameter and type of blade. ■ Built on a modular system where the weight is evenly distributed, making the saw easy to transport, handle and set up. ■ Small distance between track and blade gives a straight cut generating less wear on both saw and blade. ■ Symmetric track and carriage enable sawing on both sides of the track. ■ Deep cutting possible without changing blade due to a large maximum starter blade. ■

Husqvarna WS 463

Technical specifications – Ws 463. Flow Pressure Spindle output, max Diamond blade Cutting depth, max Weight saw head

65 l /min 230 bar 20 kW 600 –1600 mm 730 mm 22.0 kg

More technical specifications on page 30.

Technical specifications – PP 455 E. Husqvarna PP 455 E

Pressure Flow Power output Weight including oil

230 bar 65 l /min 25 kW 139 kg

More information on PP 455 E on page 26.

applications.

Deep cutting in reinforced concrete, bricks and other building materials, up to 730 mm thickness. ■ All kinds of sawing including stair cutting, bevel cutting and flush cutting. ■ All kinds of openings such as windows, doors and ventilation. ■

Product specifications. WS 463, Ø 800 mm

965 15 60 01

Supplied with 4 wall mounting brackets, track coupling, oil, blade guard, connectable track (2.0 m / 1.2 m) with saw trolley, tool kit, track holder and blade guard guide.

Diamond tools. MATERIAL R E I N F O R C E D C O N C R E TE , H A R D R E I N F O R C E D C O N C R E TE , M E D I U M R E I N F O R C E D C O N C R E TE , S O F T BRICK

Read more on page l = Optimal l = Good l = Acceptable

– = Not recommended

W 1220

W 1230

l l l l

Blade guard.

Blade guard for flush cutting.

Blade guard holder.

Track holder for eaiser track mounting.

Track in 3 different lengths. i

Mounting bracket, universal.

Mounting bracket, standard. m

Tool kit, complete set of wrenches, allen keys and sockets.

Saw carriage.

Coupling link for joining tracks together. n

Cleaning brush.

Blade flange hub.

Measure pin to mounting bracket. o

Grease gun.

Oil, 3 dl.

Accessories. A A A A b b b b c d e e e

Blade guard, 800 mm Blade guard, 1000 mm Blade guard, 1240 mm Blade guard, 1600 mm Blade guard for flush cutting, 800 mm Blade guard for flush cutting, 1000 mm Blade guard for flush cutting, 1240 mm Blade guard for flush cutting, 1600 mm Blade guard holder Saw carriage Track, 1.2 m Track, 2.0 m Track, 2.2 m

505 15 29-01 505 15 30-01 505 15 31-01 504 00 54-01 504 00 50-01 504 00 52-01 504 00 53-01 504 00 55-01 505 18 74-01 505 22 69-01 531 11 30-45 531 11 30-46 531 11 30-47

f g h i j k l m n o

Track holder Blade flange hub, bore 60 mm Mounting bracket, universal Monting bracket, standard Coupling link Measure pin Tool kit Cleaning brush Grease gun Oil

531 11 32-48 574 82 95 02 531 11 32-00 531 11 32-46 531 11 32-47 531 11 32-65 501 37 52-01 531 11 32-68 531 11 91-08 522 82 77 01

Husqvarna wall sawing system – Ws 325.

Husqvarna WS 325

Husqvarna WS 325 has a cutting depth of 400 mm.

Husqvarna PP 325 E

Symmetric track and carriage enable sawing on both sides of the track.

applications.

Technical specifications – Ws 325.

Cutting in reinforced concrete, bricks and other building materials, up to 400 mm thickness. ■ Lighter applications like sawing brick walls. ■ A wall saw for surroundings where access to maintenance is limited.

Flow Pressure Spindle output, max Diamond blade Cutting depth, max Weight saw head

■

Benefits.

Robust and easy-to-use wall saw, due to manually operated saw carriage and manual blade depth adjustment. ■ Symmetric track and carriage enable sawing on both sides of the track. ■ Small distance between track and blade gives a straight cut generating less wear on both saw and blade. ■ Central flushing through the blade flange means efficient cooling with little water spillage. ■ Combined lifting /locking handles ensure easy attachment to the track. ■ Can be used with most power packs on the market which makes it a perfect all-round saw. ■

36– 45 l /min 220 bar 6.3 kW 700–930 mm 400 mm 24.0 kg

More technical specifications on page 30.

Technical specifications – PP 325 E. Pressure Flow Power output Weight including oil

140 bar 40 l /min 9.3 kW 95 kg

More information on PP 325 E on page 28.

Product specifications. WS 325, Ø 930 mm, bore 60 mm

965 15 54 02

Supplied with 4 wall mounting brackets, track coupling, oil, blade guard, connectable track (2.0 m / 1.2 m) with saw trolley, tool kit, track holder and blade guard guide.

Blade guard.

Blade guard for flush cutting.

Flush cutting flange.

Mounting bracket.

Track in two different lengths.

Coupling link for joining tracks together. Water hose with valve.

Angle adapter, roof.

Angle adapter, stairs.

Telescopic feed handle for track feeding.

Feed handle for depth adjustment.

Accessories. A A b b c d E E F G H I J K

Blade guard, 730 mm Blade guard, 930 mm Blade guard for flush cutting, 930 mm Blade guard for flush cutting, 730 mm Flush cutting flange, bore 60 mm Mounting bracket Track, 2.3 m Track, 1.3 m Coupling link Water hose with valve Angle adapter, roof Angle adapter, stairs Telescopic feed handle Feed handle

531 11 30-57 531 11 30-62 531 11 31-25 531 11 31-27 531 11 30-27 531 11 31-38 531 11 30-10 531 11 30-11 531 11 30-13 531 11 30-37 531 11 30-32 531 11 30-36 531 11 30-07 531 11 30-02

Diamond tools. MATERIAL

W 1210

R E I N F O R c E d c O Nc R E T E , H A R d R E I N F O R c E d c O Nc R E T E , M E d I uM R E I N F O R c E d c O Nc R E T E , s O F T bRIcK

Read more on page l = Optimal l = Good l = Acceptable

l l l l 36

â&#x20AC;&#x201C; = Not recommended

Husqvarna PP 480 HF.

Technical specifications.

applications.

Power output Weight

Electric power pack for electric products like the Husqvarna WS 482 HF. ■ The unit is suitable for applications where easy transportation is requested. ■ The unit can be used in surroundings where water usage should be kept at a minimum. ■

More technical specifications on page 30.

Product specifications. WS 482 HF / PP 480 HF, 400 – 480 V, 4 pin, Ø 1000 mm

966 41 75 04

accessories and spare parts.

Benefits.

A powerful converter operated by radio remote control provides fast and accurate adjustment for each operating condition. ■ Low weight and compact design make it easy to transport. ■ Can be operated with 16, 25 and 32 A fuses, with high power on the spindle. ■ Only one cable from converter to machine, which simplifies set-up and transport. ■ The wireless remote-controlled electric water valve makes the water start with the cut, for a cleaner environment. ■ The wireless remote control provides extensive information to the operator (power level, operating time, service period, errors etc), to ensure total control of the sawing process and excellent freedom of movement at the workplace. ■

A B C D E F

CANbus cable, 6 m Cable Socket 32 A Water valve Water hose, 8 m Harness

CANbus cable.

20 kW 23.4 kg

531 11 50 12 531 12 32-48 531 11 71-31 505 42 42-01 505 11 53-01 510 28 00-01

Cable for power connection to saw.

Husqvarna PP 440 HF.

applications.

Technical specifications.

Electric power pack for electric products like the Husqvarna WS 440 HF. ■ The unit is suitable for applications where easy transportation is requested. ■ The unit can be used in surroundings where water usage should be kept at a minimum.

Power output Weight

■

More technical specifications on page 30.

Product specifications. WS 440 HF / PP 440 HF, 400 V, 4 pin, Ø 800 mm

A powerful converter provides fast and accurate adjustment for each operating condition. ■ Low weight (18 kg) and compact design make it easy to transport. ■ Can be operated with 16, 25 and 32 A fuses, with high power on the spindle. ■ Only one cable from converter to machine, which simplifies set-up and transport. ■ The wireless remote-controlled electric water valve makes the water start with the cut, for a cleaner environment. ■ The wireless remote control provides extensive information to the operator (power level, operating time, service period, errors etc), to ensure total control of the sawing process and excellent freedom of movement at the workplace. ■

Socket 32 A.

D F

Water valve for flow control of water to the blade.

966 86 83 03

accessories and spare parts.

Benefits.

C E

15 kW 18.0 kg

A B C D E F

CANbus cable, 6 m Cable Socket 32 A Water valve Water hose, 8 m Harness

G E

Water hose.

531 11 50 12 531 12 32-48 531 11 71-31 505 42 42-01 505 11 53-01 510 28 00-01

Curved aluminium bar, worn over one shoulder, for the remote control.

Husqvarna PP 455 E.

The handles are vertically adjustable and the power pack can be laid down on its handles, during transport as well as operation.

The WS 463 is easy to attach to the unit to facilitate transportation of the equipment.

applications.

Technical specifications.

Flexible electric power pack for hydraulic products. ■ For high-performance equipment such as Husqvarna WS 463 and CS 2512.

Pressure Flow Power output Weight including oil

Benefits.

More technical specifications on page 30.

The wireless remote control provides extensive information to the operator (power level, current pressure, operating time, service period, errors etc), to ensure total control of the sawing process and excellent freedom of movement at the workplace. ■ The handles are vertically adjustable and the power pack can be laid down on its handles during transport. ■ WS 463 can easily be fastened to the power pack, facilitating transport. ■ Electronic valves mean you can connect the hoses to the power pack with less effort. ■ Fitted with a 230 V outlet for the connection of peripheral equipment (when using 5 pin, 3-phase system). ■ Can be operated on both 32 A and 63 A fuses.

Product specifications.

■

PP 455 E, 400 V, 4 pin, with radio

230 bar 65 l /min 25 kW 139 kg

965 15 66 02

Supplied with remote control incl. CANbus cable (6 m), recharging adapter (12 V / 230 V), bag for remote control and accessories, hose package (8 m).

accessories and spare parts. A B C D E F

CANbus cable, 6 m Hose set incl. couplings, 8 m Water hose connection Hydraulic oil filter Supplementary cooler External cooler

531 11 50-12 531 11 51-90 510 20 30-01 531 11 81-42 504 81 20-01 574 23 73-01

A F

CANbus cable. D E

Hydraulic oil filter.

Hose set including couplings. E F

Supplementary cooler, to be used where the inlet water temperature is higher than 25째C or the outlet water flow from the machine is lower than 5 l /min.

Water hose connection located on PP. G F

External cooler, to be used where the need for additional cooling is increased.

Husqvarna PP 325 E. The PP 325 E is easy to transport and is ideal for use by one person.

The trolley and frame make the PP 325 E easy to move around, and it can be laid down on its handles.

applications.

Technical specifications.

Electric power pack for hydraulic products like the Husqvarna WS 325 wall saw, DM 406 H drill motor, K 3600 MK II and K 2500 power cutters. ■ For surroundings where access to maintenance is limited.

Pressure Flow Power output Weight including oil

■

Benefits.

Light and compact, easy to use and transport. ■ The control of the unit is easy to manoeuver. ■ Easy and smooth starts with SoftStart™. ■ The power pack can be operated on 16 A fuse.

140 bar 40 l /min 9.3 kW 95 kg

More technical specifications on page 30.

Product specifications. PP 325 E, 400 V, 4 pin SoftStart™

965 15 64 04

■

accessories and spare parts for PP 345 E and PP 325 E. A Water hose connection B Hydraulic oil filter

Water hose connection.

Hydraulic oil filter.

510 20 30-01 531 11 82-49

Technical specifications for wall saws.

WS 482 HF

WS 440 HF

Min blade diameter, mm

600

Max starter blade, mm

1000

Max blade diameter, mm

1600

1200

Max cutting depth, mm

730

530

Motor for saw blade

Electric

Max spindle output, kW

Output speed, rpm

0 – 850 / 0 – 1225

0 –1225

Feeding system / control

Electric /Auto

Max drive torque at the saw blade, Nm

235 / 174

125

Starting torque, Nm

200 / 160

100

Weight saw head, kg

28.3

25.0

Weight 2 m track section including carriage, kg

18.5

Weight 1.2 m track section including carriage, kg

12.0

Weight track section 2.3 m, kg

– –

Read more on page

Weight track section 1.3 m, kg

– –

Technical specifications for power packs.

PP 480 HF

PP 440 HF

Flow, l / min

– –

Power output, kW

Rated current,A

32 / 25 / 16 reduced

Voltage,V

400

Weight including oil, kg

23.4

18.0

Read more on page

Pressure, bar

*As rated by the engine manufacturer.

– –

WS 463

WS 325

600

–

1000

700

1600

930

730

400

Hydraulic

6.3

630 / 1000 / 1400

1100

Hydraulic /Auto

Manual / Manual

350 / 200 / 120

250 / 170 / 100 22.0 18.5 12.0

– –

– – –

13 23 22

PP 455 E

PP 325 E

230

140

9.3

63 / 32 reduced

400

139

With their unique design, Husqvarna’s wall saw blades ensure top performance in terms of product life and cutting properties. In production the latest technologies as well as high-quality components are used, to maximise product reliability and consistency. The W 1200 series has Diagrip™, a revolutionary technology for manufacturing segments, which delivers superior cutting capacity, longer life and a smooth, rapid cut.

The W 1200 Diagrip™ series, our premium blades, features a three-layer sandwich core which produces 50 % less noise than a standard solid core. The W 600 series consists of blades with a high cutting speed and a good balance between investment cost and cost per cut square metre.

DiaMOnD TOOls FOR Wall saWing

application chart. MATERIAL

W 1200 DIAGRIP TM SERIES

R E I N F O R C E D C O N C R E TE , H A R D R E I N F O R C E D C O N C R E TE , M E D I U M R E I N F O R C E D C O N C R E TE , S O F T BRICK

Read more on page l = Optimal l = Good l = Acceptable

10 – 20 KW

20 – 40 KW

W 1210

W 1230

l l l l

– = Not recommended

DiaMOnD BlaDEs FOR Wall saWs

Husqvarna W 1200 Diagrip™ series. Diagrip™, a revolutionary technology for manufacturing segments, yields superior cutting capacity, longer life and a smooth, rapid cut. ■ With a unique three-groove segment design, it optimises segment cooling and disposal of saw slurry. Providing excellent cutting speed and blade life. ■ With low noise three-layer sandwich blade core, it halves noise level. ■ All blades feature the sandwich design. This helps them blade to retain their shape ensuring superior cutting speed and maximum utilisation of the full segment height. ■ W 1210 Diagrip™ and W 1205 Diagrip™ is also available with 3.8 mm blade thickness for low powered electric saws. ■

Revolutionary diamond tool technology for superior cutting capacity and durability. One of the greatest benefits with this technology is how fast and smooth Diagrip™ tools cut in all types of construction materials, especially in heavily reinforced concrete. Diagrip™ tools mean trouble-free sawing, they just work their way through the toughest materials.

The diamonds are specially treated to remain in place in the segments longer, and be distributed optimally, delivering maximum efficiency to every diamond. With Diagrip™, the diamonds are exposed and expended at an even rate, which makes the cutting even and powerful, even when cutting hard materials like reinforced concrete.

This shows how effectively the Diagrip™ blade cuts in reinforcement.

This clearly shows the difference in capacity and speed between a traditional blade, to the left, and Diagrip™, to the right. The Diagrip™ blade has made the cut all the way, whilst the traditional blade still has 20 – 25 % to cut.

The Diagrip™ tools have a segment design which makes it easier to remove particles and shavings. It maintains cutting capacity during operation, increasing efficiency and service life.

Having larger diamonds, The Diagrip™ produces thicker and even shavings than you would expect from traditional segments. This is a sign that Diagrip™ gets a very good grip on the material – which means more efficient sawing. 35

Husqvarna W 1200 Diagrip™ series. Diagrip™, a revolutionary new technology for manufacturing segments, yields superior cutting capacity, longer life and a smooth, rapid cut. ■ With a unique three-groove segment design, “four segments in one”, it optimises segment cooling and disposal of saw slurry. Providing excellent cutting speed and blade life. ■ With low noise three-layer sandwich blade core, it halves noise level. ■ All blades feature the sandwich design. This helps them blade to retain their shape ensuring superior cutting speed and maximum utilisation of the full segment height.

Husqvarna W 1210 Diagrip™. For HarD to meDium HarD concrete, LoW–PoWereD SaWS, 10– 20 KW PRODUCT NUMBER – WITH FLUSH CUTTING HOLES STANDARD WALL SAW BLADES

DIAMETER, MM

SEGMENT LENGTH, MM

SEGMENT WIDTH, MM

SEGMENT HEIGHT, MM

BORE, MM

505 03 59-04 505 03 61-04 505 03 63-02 505 03 64-02 505 03 65-02 505 03 66-02

600 700 800 900 1000 1200

46 46 46 46 46 46

4.7 4.7 4.7 4.7 4.5 4.5

10 + 3 10 + 3 10 + 3 10 + 3 10 + 3 10 + 3

60 60 60 60 60 60

46 46 46

3.8 3.8 3.8

10 + 3 10 + 3 10 + 3

60 60 60

WALL SAW BLADES FOR LOW-POWERED ELECTRIC SAWS

505 03 58-02 505 03 59-02 505 03 61-02

500 600 700

Husqvarna W 1230 Diagrip™. FOR HARD, MEDIUM AND SOFT CONCRETE, HIGH–POWERED SAWS, 15 – 30 KW

This product available on specific request only. ■ Designed to give you optimum life at best cutting rate on WS 463 and WS 482 HF. ■

Husqvarna W 1230 Diagrip™. aVailaBlE as sPEcial ORDER OnlY FOR HaRD TO MEDiuM HaRD cOncRETE, HigH–POWERED saWs, 20–40 KW PRODUCT NUMBER DIAMETER, MM – WITH FLUSH CUTTING HOLES STANDARD WALL SAW BLADES

SEGMENT LENGTH, MM

SEGMENT WIDTH, MM

SEGMENT HEIGHT, MM

BORE, MM

505 03 67-02 505 03 68-02 505 03 69-02 505 03 70-02 505 03 71-02 505 03 72-02 505 03 73-02 505 03 74-02

46 46 46 46 46 46 46 46

4.7 4.7 4.7 4.7 4.7 4.7 4.5 4.5

10 + 3 10 + 3 10 + 3 10 + 3 10 + 3 10 + 3 10 + 3 10 + 3

60 60 60 60 60 60 60 60

600 650 700 750 800 900 1000 1200

Flush cutting holes, PL 3011.

Flush cutting.

wire sawing

Application overview

Range overview

Benefit overview

Husqvarna wire saw

Diamond tools for wire sawing

Sawing with diamond wire is the simplest and most efficient way to remove large concrete constructions, or to make holes in thick walls. A wire saw is easy to use. Itâ&#x20AC;&#x2122;s powerful and flexible which also makes it perfect for smaller jobs. Our wire saw makes sawing easy thanks to its unique design that increases the friction between the wire and the drive wheel. There is virtually no limit in terms of sawing depth. And our unique diamond tools enable you to cut very complex structures, both in steel and heavily reinforced concrete.

wire sawing â&#x20AC;&#x201C; application overview.

Wire sawing for large jobs such as foundations and bridges.

Cutting in thick walls and openings with exact corners.

Deep wire sawing in confined spaces.

CS 10 has a flexible design and can easily be mounted on objects like pipes.

The saw can be installed to cut on the right or the left. This gives great flexibility during installation and in selecting the direction of cutting.

wire sawing – range overview.

APPLICATIONS ■ ■ ■ ■ ■ ■

■ ■ ■

■ ■

PRODUCT

TECHNICAL SPECIFICATIONS

PAGE

Deep sawing. Sawing in steel, concrete and other building materials. Large-dimension sawing such as in pipes and tubes. Operation in confined spaces along with pulley wheels. Applications that require dry cuts. Suitable for all kind of openings with exact corners.

Husqvarna Cs 2512.

Wire speed Magazine capacity Wire length Flow Pressure Weight

20 or 25 m /s 12 m 15 m 65 l /min 230 bar 150 kg

Sawing in steel, concrete and other building materials. Both small and larger jobs. The symmetrical design lets you use the machine in all positions and to reach into the tightest spots. Can be used where dry cuts are needed. Suitable for all kind of openings with exact corners.

Husqvarna Cs 10.

Output power with WS 482 HF and PP 480 HF 19 kW Output power with WS 440 HF and PP 440 HF 13 kW Speed 0 –1200 rpm Wire speed at 1200 rpm 24 m /s Magazine capacity 10 m Wire length, max /min 11.7 / 1.7 m Column height 1200 mm Weight, WS 482 HF / WS 440 HF 138 /135 kg

wire sawing â&#x20AC;&#x201C; benefit overview.

Lots of sawing, little effort. Compact, with a large wire magazine.

The CS 2512 is modular, so it is easy to install and handle. It can be positioned both vertically and horizontally. The motor can be detached for easier transport.

The arm has a magazine cylinder that maintains tension on the magazine, to control the cutting and to absorb any jolts or shocks.

Locking mechanism helps the wire to stay in position in the magazine.

Husqvarnaâ&#x20AC;&#x2122;s wire saw has a large magazine capacity, so larger cuts can be made without cutting the wire.

The CS 2512 is equipped with swivel pulleys. This, in combination with the capacity to make both vertical and horizontal cuts, ensures superb flexibility.

The CS 10 can be combined with the WS 482 HF and WS 440 HF wall saws, forming a complete and flexible wire and wall cutting system. Suitable power packs are the PP 480 HF and PP 440 HF.

Husqvarna wire sawing system – CS 2512.

Husqvarna PP 455 E

Applications.

Technical specifications – CS 2512.

Deep sawing. ■ Sawing in steel, concrete and other building materials. ■ Large-dimension sawing such as in pipes and tubes. ■ Operation in confined spaces along with pulley wheels. ■ Applications that require dry cuts. ■ Suitable for all kind of openings with exact corners.

Power Motor for wire drive Max drive torque at drive wheel Starting torque Feed system / control Wire speed Magazine capacity Wire length Flow Pressure Dimensions (L × W × H) Weight

■

Benefits.

The saw has a large magazine capacity, enabling larger cuts without cutting the wire. ■ Easy set up – can be positioned vertically or horizontally. ■ No need for water when making dry cuts, for a better working environment. ■ The wire magazine is easy to operate and time-saving, for faster cuts. ■ The motor can be detached for easier transport. ■

20 kW Hydraulic multiple gear 200 Nm 190 Nm Hydraulic /Auto 20 or 25 m /s 12 m 15 m 65 l /min 230 bar 1100 × 750 × 900 mm 150 kg

Technical specifications – PP 455 E. Pressure Flow Power output Weight including oil

230 bar 65 l /min 25 kW 139 kg

More information about PP 455 E on page 26.

Product specifications. CS 2512

965 15 62 01

Diamond wires. MATERIAL CO NC RE T E R E I N F O R C E D C O N C R E TE

CS 2512 C 950 / C 1000 C

/ C 9 1000 5

H I G H LY RE I NFORC ED C O N C R E TE

C 1000 / C 1200

M E TA L

C 1000 / C 1200

Read more on page

Offset pulley system. e

Pulley. f

Swivel pulley, slide. i

Swivel pulley, ball bearing. j

Normal clamp.

Double clamp.

Single pulley. g

Offset pulley system Pulley Single pulley Angle bracket, pulley Swivel pulley, slide Swivel pulley, ball bearing Water lance Pipe, 48.3 × 1 m Pipe, 48.3 × 2 m Normal clamp Double clamp Pressure control block

Angle bracket, pulley. h

Water lance.

Pipe for pulley extension.

Pressure control block.

Accessories. a b c d e f g h h i j k

Spare parts. 504 01 19-01 531 11 30-33 531 11 44-33 531 11 31-35 531 11 44-69 531 11 44-67 531 12 15-25 531 12 06-41 531 12 06-42 531 11 95-71 531 11 44-60 531 11 44-26

Wear rubber pulleys, Ø 200 mm Wear rubber drive wheel, Ø 400 mm

531 12 00-29 531 12 00-50

Use the QR-tag to check out more about CS 2512.

Husqvarna wire sawing system – Cs 10. Use the QR-tag to check out more about CS 10.

applications.

Sawing in steel, concrete and other building materials. ■ Both small and larger jobs. ■ The symmetrical design lets you use the machine in all positions and to reach into the tightest spots. ■ Can be used where dry cuts are needed. ■ Suitable for all kind of openings with exact corners. ■

Benefits.

The saw is coupled to and operated with our electric wall saws WS 482 HF or WS 440 HF, giving you a flexible saw in one single system. ■ It can be mounted on both sides of the track and the direction of the wire is reversible. ■ The saw has a large magazine capacity, so you can make larger cuts without cutting the wire. ■ Easy to set up – can be placed both vertically and horizontally. ■ The wireless remote control (together with WS 482 HF or WS 440 HF) means superb comfort and freedom of movement for the operator. ■ No need for water when making dry cuts, which makes it useful where slurry is a concern. ■ The wire magazine is easy to operate and time-saving, which provides faster cuts. ■

Technical specifications. Output power with WS 482 HF and PP 480 HF Output power with WS 440 HF and PP 440 HF Speed Wire speed at 1200 rpm Magazine capacity Wire length, max /min Column height Weight, WS 482 HF / WS 440 HF

19 kW 13 kW 0 –1200 rpm 24 m /s 10 m 11.7 / 1.7 m 1200 mm 138 /135 kg

For additional specifications, see at each wall saw and power pack.

Product specifications. CS 10 (2 swivel pullies version)

966 56 57 01

The CS 10 can be combined with the WS 482 HF and WS 440 HF wall saws, forming a complete wire and wall cutting system.

Diamond wires. MATERIAL

CS 10

CO NC RE T E

C 950 / C 1000

R E I N F O R C E D C O N C R E TE

/ C 9 1000 5

H I G H LY RE I NFORC ED C O N C R E TE

C 1 000

M E TA L

C 1000

Read more on page

Offset pulley system. e

Swivel pulley, slide. i

Normal clamp.

Pulley. f

Single pulley. g

Swivel pulley, ball bearing.

Angle bracket, pulley. h

Water lance.

Pipe for pulley extension.

Double clamp.

Accessories.

With the CS 10 you can saw both vertically and horizontally. The saw head can be mounted on either side of the track and you can choose the wire’s direction of rotation. All of this makes for highly flexible and efficient wire sawing.

a b c d e f g h h i j

Offset pulley system Pulley Single pulley Angle bracket, pulley Swivel pulley, slide Swivel pulley, ball bearing Water lance Pipe, 48.3 × 1 m Pipe, 48.3 × 2 m Normal clamp Double clamp

504 01 19-01 531 11 30-33 531 11 44-33 531 11 31-35 531 11 44-69 531 11 44-67 531 12 15-25 531 12 06-41 531 12 06-42 531 11 95-71 531 11 44-60

Spare parts. Wear rubber pulleys, Ø 200 mm Wear rubber drive wheel, Ø 400 mm

531 12 00-29 531 12 00-50

Husqvarna offers a complete range of diamond wires, engineered for use with a variety of materials and numerous applications. With more than 40 years of industry experience, we have accumulated extensive knowledge of diamond bead design and wire assembly throughout the years. Husqvarna diamond wires use injected synthetic rubber and springs for the assembly.

A synthetic rubber wire is very flexible, making it easy to use, as well as minimising the risk of uneven wear to the wire beads. Husqvarna’s generation of wires has at least 40 beads per metre. More beads per metre means increased contact between the cutting diamonds and the wire, resulting in higher speed and increased product life. Also, the distance between the beads is smaller, making for a more even cut.

application chart – diamond wires. MATERIAL

10 – 20 kW

20 – 33 kW

> 33 kW

CO NC RE T E

C 950 / C 1000

C 950 / C 1 0 0 0

C 1000

R E I N F O R C E D C O N C R E TE

C 950 / C 1000

C 1000

H I G H LY RE I NFORC ED C O N C R E TE

C 1000

C 1000 / C 1200

M E TA L

C 1000

C 1000 / C 1200

Read more on page

DiaMOnD TOOLs FOr wire sawing

Vacuum-brazed wires are developed specifically for demanding applications like dry and wet cutting in reinforced concrete, and in solid or hollow steel. The vacuum technology enhances durability and performance. Vacuum technology uses active welding, one of the strongest welding methods, making for extra hard bonds and excellent diamond retention.

As all of our professional range wires have the same orange rubber, an indicator ring is used to distinguish between the wire models. This indicator ring is pierced with a number of holes corresponding to the wire model. So itâ&#x20AC;&#x2122;s easy to identify the wires, even when they are worn.

Quality indicator ring. MODEL

HOLES

C 1200 C 1000 C 950

5 4 6

DiaMOnD TOOLs FOr wire sawing

Vacuum-brazed wires.

Vacuum-brazed wires cut faster and last longer than standard electroplated / sintered wires. They are ideal for both dry and wet cutting.

Husqvarna C 1200. THe HigH-enD wire FOr DeManDing aPPLiCaTiOns, > 20 kw

Developed specifically for heavy demolition jobs (e.g. dry cutting of steel, nuclear decommissioning, and extremely accurate sawing on oilrigs). ■ The increased number of beads gives the wire excellent performance on these demanding jobs. ■

Husqvarna C 1000. THe uniVersaL wire, > 10 kw

Designed for cutting in medium to hard reinforced concrete, and can be used in extreme conditions like dry cutting and iron sawing. ■ Cuts faster and lasts longer than standard electroplated /sintered wire. ■

new

Husqvarna C 950. THe uniVersaL wire, > 10 kw

PRODUCT NUMbER C 1200

NUMbER OF bEADS / M

DIAMETER bEADS, MM

ASSEMbLY

CUTTING SYSTEM

543 07 77-08

10.3

Springs + rubber, vacuum-brazed beads

Dry / wet

10.3

Springs + rubber, vacuum-brazed beads

Dry / wet

10.3

Springs + rubber, vacuum-brazed beads

Dry / wet

C 1000

543 08 09-61 C 950

543 08 09-61

Closed loop wires. aVaiLaBLe as sPeCiaL OrDer OnLY wire wiTHOuT COnneCTiOn THaT neVer FaiLs

The wire that doesn’t need the weakest link: a connection. ■ Perfect for cutting in steel, sandwich and hollow structures. ■ This wire is used mainly in offshore and nuclear applications. ■ Wires can be used on push cutting machines and conventional pulling machines (open pulleys are necessary). ■

PRODUCT NUMbER C 1200 SPL

NUMbER OF bEADS / M

DIAMETER bEADS, MM

ASSEMbLY

CUTTING SYSTEM

521 98 30-01

10.3

Springs + rubber, vacuum-brazed beads, closed loop

Dry / wet

10.3

Springs + rubber, vacuum-brazed beads, closed loop

Dry / wet

10.3

Springs + rubber, vacuum-brazed beads, closed loop

Dry / wet

9.8

Springs + rubber, vacuum-brazed beads, closed loop

Dry / wet

C 1000 SPL

521 98 29-01 C 950 SPL

577 67 82-01 C 900 SPL

577 05 91-01

diamoNd TooLs For wire sawiNG

Husqvarna connector. For vacuum-brazed wires

Designed to maintain cutting effect at the connector’s location. ■ Same size as a standard screw connector (24 mm) and maintains the cutting by a vacuum-brazed concretion on its female part. ■

PRODUCT nUmbeR

OUTeR DiameTeR, mm

inneR DiameTeR, mm

LengTh, mm

CabLe DiameTeR, mm

TYPe

PReSS, TOnne

DieS PReSS

USe On WiRe

543 08 40-49

9.5 (diamond bead 10.3)

5.1

SCR

4.5

PC(HT45)H5F-70

C 1000 and C 1200

accessories for diamond wires. PRODUCT OUTeR nUmbeR DiameTeR, mm a COnneCTOR, CYLinDeR 16

inneR DiameTeR, mm

LengTh, mm

CabLe DiameTeR, mm

TYPe

PReSS, TOnne

DieS PReSS

543 08 07-19

5.1

CYL9

4.5

PC(HT45)H5F-66 *

5.1

CYL9

4.5

PC(HT45)H5F-66 *

SCR

4.5

PC(HT45)H5F-70 *

CRD

4.5

PC(HT45)H5F-70 *

b COnneCTOR, CYLinDeR 20

543 02 16-70

C COnneCTOR, SCReWeD

543 02 15-15

9.5

D COnneCTOR, CaRDan

543 02 15-84

9.5

* Explanation of code: H5F -66 / H5F -70 means that the die length is 5 mm and the distance between parallel sides of the hexagon is 6.6 / 7.0 mm.

Husqvarna has a complete range of connectors designed for the wires. There are also appropriate hydraulic hand presses and corresponding dies for crimping the connectors.

e F F g h

Spare pin for cardan Press, cembre 4.5 Tonne Dies, press 66 Dies, press 70 Wire bag Wire cooling dry steel cutting

Press, cembre.

543 02 15-90 543 00 06-70 543 00 28-89 543 00 28-78 522 91 45-01 576 37 83-01

Dies, press.

Wire bag.

Wire cooling dry steel cutting.

flat sawing

Range overview

Husqvarna flat saws

Technical specifications for flat saws

Diamond blades for flat sawing

Our extensive range of flat saws includes productive saws for floors, driveways, carparks, roadways, runways, new concrete, old concrete and asphalt. The blades and machines must safely and powerfully work together with the material being cut. In addition to prioritising the requirements of the users, we evaluate the capacity and efficiency of our equipment, allowing us to continually develop efficient solutions.

flat sawing – range overview. APPLICATION ■

■ ■

■

■ ■

PRODUCT

TECHNICAL SPECIFICATIONS

Large jobs such as airports, highways, larger service work, and other application where production is a concern. Deep sawing applications. Versatile enough for smaller jobs that require high production rates.

Husqvarna fs 8400 D.

Power Power at blade shaft Diamond blade, max Cutting depth, max Weight, approx.

62 kW, 84 hp * 53 kW, 72 hp 1500 mm 620 mm 955 kg

Large jobs such as airports, highways, larger service work, and other application where production is a concern. Mid-size and smaller jobs that require high production rates.

Husqvarna fs 6600 D.

Power Power at blade shaft Diamond blade, max Cutting depth, max Weight, approx.

49 kW, 66 hp * 44 kW, 60 hp 1000 mm 410 mm 850 kg

Jobs such as airports, highways, service work, and other application where production is a concern. Mid-size to small jobs that require high production rates.

Husqvarna fs 4800 D.

Power Power at blade shaft Diamond blade, max Cutting depth, max Weight, approx.

35 kW, 48 hp * 30 kW, 42 hp 750 mm 300 mm 650 kg

Jobs such as airports, highways, service work, and other application where production is a concern. Ideal for heavy-duty commercial, industrials and paving applications. Available with a 3-speed gearbox.

Husqvarna fs 4400 D.

Power Power at blade shaft Diamond blade, max Cutting depth, max Weight, approx.

32 kW, 44 hp * 24 kW, 33 hp 750 mm 300 mm 535 kg

* As rated by the engine manufacturer.

PAGE

APPLICATION

PRODUCT

TECHNICAL SPECIFICATIONS

PAGE

■

Suitable for all medium to small service work such as paving, warehouses, footpaths and other commercial and industrial applications.

Husqvarna fs 627.

FS 627, petrol Diamond blade, max Cutting depth, max Weight

20 kW, 27 hp * 750 mm 300 mm 295 kg

■

Medium to small service and repair work jobs where a self propelled saw is needed for production.

Husqvarna fs 524.

FS 524, petrol 15.3 kW, 20.5 hp * Diamond blade, max 500 / 600 mm Cutting depth, max 190 / 220 mm mm Weight 197/ 231 kg

■

Medium to small service and repair jobs.

Husqvarna fs 413.

FS 413, petrol Diamond blade, max Cutting depth, max Weight

8.2 kW, 11 hp * 500 mm 190 mm 145 / 163 kg

■

Very small road repair jobs. Cutting small trenches for pipe laying. Cutting in difficult to access job sites.

Husqvarna fs 309.

FS 309, petrol Diamond blade, max Cutting depth, max Weight

6.7 kW, 9 hp * 350 mm 120 mm 54 / 64 kg

■ ■

* As rated by the engine manufacturer.

Husqvarna FS 8400 D.

The handles (patent pending) are easily adjusted, so the user can find the most comfortable working position.

Available in versions with 3-speed or 1-speed transmission. The 3-speed version extends the range of applications and allows for optimum performance when step cutting. ■ Equipped with mechanical (3-speed) or electronic (1-speed) clutch for instant release of power transmission, which fulfils safety regulations.

Applications.

■

Large jobs such as airports, highways, larger service work, and other application where production is a concern. ■ Deep sawing applications. ■ Versatile enough for smaller jobs that require high production rates.

Technical specifications.

■

Benefits.

One of the most powerful and productive flat saws on the market. ■ Patented power transmission system transmits more power to the bladeshaft with optimum torque. ■ Bladeshaft tachometer helps operator identify correct bladeshaft rpm for selected blade size. ■ Electric tracking system allows operator to make tracking adjustments with a touch of a switch, while cutting. ■ Patented IntelliSeal bladeshaft system allows for a minimum of 500 maintenance-free hours and eliminates daily greasing of bearings. ■

Engine: John Deere, diesel Power at blade shaft Diamond blade, max Cutting depth, max Weight, approx.

62 kW *, 84hp 53 kW 1500 mm 620 mm 955 kg

More technical specifications on page 70. * As rated by the engine manufacturer.

Product specifications. FS 8400 D, 1500 mm blade guard, rear pivot with clutch and electrical tracking FS 8400 D*, 3-speed, 1500 mm blade guard, gear box and electrical tracking *Special order only.

Diamond blades. MATERIAL

FS 1240

l l l

Cu R E d C O NC RE T E , HA R d Cu R E d C O NC RE T E , M E dI uM Cu R E d C O NC RE T E , S O F T

– –

ASPH A LT, HARd ASPHALT, S O FT

Read more on page l = Optimal l = Good l = Acceptable

– = Not recommended

965 88 55 17 965 88 55 31

Blade guard slip-on. D

Blade guard slip-on with mounting kit. E

Dual light kit.

Water pump kit.

Blade guard slip-on, 450 mm Blade guard slip-on, 600 mm Blade guard slip-on, 800 mm Blade guard slip-on, 900 mm Blade guard slip-on, 1000 mm Blade guard slip-on with mounting kit, 1000 mm Blade guard bolt-on, 1200 mm Blade guard bolt-on, 1500 mm Dual light kit Weight kit, 30 kg Catalytic converter kit

Blade guard bolt-on. G

Weight kit.

accessories. A A A A A B C C D F G

Catalytic converter kit, for outdoor use only.

spare parts. 542 19 87 78 542 20 32 66 542 20 33 05 542 20 33 18 504 01 94 01 504 55 83 01 542 20 33 31 542 19 81 91 542 18 11 17 542 19 61 72 504 61 12 01

Blade shaft belts, 450, 600, 900 and 1200 mm × 4 Blade shaft belts, 750 mm × 4 Blade shaft belts, 1000 mm × 4 Blade shaft belts, 1500 mm × 4 Blade collar (outer flange with drive pin), 114 mm Blade collar (outer flange with drive pin), 127 mm Blade collar (outer flange with drive pin), 152 mm Blade collar (outer flange with drive pin), 178 mm Drive pin, 450 – 800 mm Drive pin, 900 – 1000 mm Bladeshaft wrench Front wheel Rear wheel Air filter, outer Air filter, inner Engine oil filter Hydraulic oil filter Fuel filter

542 19 97-00 542 19 67-66 542 19 97-65 541 20 19-08 542 16 31-72 542 16 63-07 542 16 32-72 542 19 93-78 505 53 19-01 539 30 00-10 539 30 01-33 542 19 17-70 542 19 88-42 542 19 11-15 542 19 11-16 542 19 94-60 542 16 64-49 542 19 94-61

Husqvarna fs 6600 D. applications.

Large jobs such as airports, highways, larger service work, and other application where production is a concern. ■ Mid-size and smaller jobs that require high production rates. ■

Benefits.

One of the most powerful and productive flat saws in the mid-size segment. ■ Patented power transmission system transmits more power to the bladeshaft with optimum torque. ■ Bladeshaft tachometer helps operator identify correct bladeshaft rpm for selected blade size. ■ Electric tracking system allows operator to make tracking adjustments with a touch of a switch, while cutting. ■ Patented IntelliSeal bladeshaft system allows for a minimum of 500 maintenance-free hours and eliminates daily greasing of bearings. ■ Available in versions with 3-speed or 1-speed transmission. The 3-speed version extends the range of applications and allows for optimum performance when step cutting. ■ Equipped with mechanical (3-speed) or electronic (1-speed) clutch for instant release of power transmission, which fulfils safety regulations. ■

technical specifications. Engine: John Deere, diesel Power at blade shaft Diamond blade, max Cutting depth, max Weight, approx. The gearbox shift lever is used to change the output speed of the engine gearbox. Three speeds and two neutral positions are standard. The gearbox shift lever positions are colourcoded to match the blade diameter and the bladeshaft rpm decal located on the control panel. Gearbox detent locks the gearbox shift lever in position.

49 kW *, 66hp 44 kW 1000 mm 410 mm 850 kg

More technical specifications on page 70. * As rated by the engine manufacturer.

Product specifications. FS 6600 D, 660 mm blade guard,rear pivot with clutch and electrical tracking FS 6600 D, 900 mm blade guard, 3-speed gearbox

Diamond blades. MATERIAL

FS 1240

l l l

CU R E D C O NC RE T E , H A R D CU R E D C O NC RE T E , M E DI UM CU R E D C O NC RE T E , SO F T

– –

ASPH A LT, HARD ASPHALT, SO FT

Read more on page l = Optimal l = Good l = Acceptable

– = Not recommended

965 88 54 07 965 8 854 24

Blade guard slip-on. D

Blade guard slip-on with mounting kit. E

Water pump kit.

Weight kit.

accessories. A A A A A B C E F

Blade guard slip-on, 450 mm Blade guard slip-on, 600 mm Blade guard slip-on, 800 mm Blade guard slip-on, 900 mm Blade guard slip-on, 1000 mm Blade guard slip-on with mounting kit, 1000 mm Dual light kit Weight kit, 30 kg Catalytic converter kit

Dual light kit.

Catalytic converter kit, for outdoor use only.

spare parts. 542 19 87 78 542 20 32 66 542 20 33 05 542 20 33 18 504 01 94 01 504 55 83 01 542 18 11 17 542 19 61 72 504 61 12 01

Blade shaft belts, 450, 600 and 900 mm × 4 Blade shaft belts, 800 mm × 4 Blade shaft belts, 1000 mm × 4 Blade collar (outer flange with drive pin), 114 mm Blade collar (outer flange with drive pin), 127 mm Blade collar (outer flange with drive pin), 152 mm Blade collar (outer flange with drive pin), 178 mm Drive pin, 450 – 800 mm Drive pin, 900 – 1000 mm Bladeshaft wrench Front wheel Rear wheel Air filter, outer Air filter, inner Engine oil filter Hydraulic oil filter Fuel filter

542 16 66-29 542 16 63-62 542 19 97-64 542 16 31-72 542 16 63-07 542 16 32-72 542 19 93-78 505 53 19-01 539 30 00-10 539 30 01-33 542 19 17-70 542 19 88-42 542 19 11-15 542 19 11-16 542 19 94-60 542 16 64-49 542 19 94-61

Husqvarna fs 4800 D. applications.

Jobs such as airports, highways, service work, and other application where production is a concern. ■ Mid-size to small jobs that require high production rates. ■

Benefits.

One of the most powerful and productive flat saws in the small /mid-size segment. ■ Rear pivot model is recommended when manoeuverability is key for road repair and service work. ■ Patented power transmission system transmits more power to the bladeshaft with optimum torque. ■ Bladeshaft tachometer helps operator identify correct bladeshaft rpm for selected blade size. ■ Electric tracking system allows operator to make tracking adjustments with a touch of a switch, while cutting. ■ Patented IntelliSeal bladeshaft system allows for a minimum of 500 maintenance-free hours and eliminates daily greasing of bearings. ■ Available in versions with 3-speed or 1-speed transmission. The 3-speed version extends the range of applications and allows for optimum performance when step cutting. ■ Equipped with mechanical (3-speed) or electronic (1-speed) clutch for instant release of power transmission, which fulfils safety regulations. ■

technical specifications. Engine: Yanmar, diesel Power at blade shaft Diamond blade, max Cutting depth, max Weight, approx.

35 kW *, 48hp 30 kW 750 mm 300 mm 650 kg

More technical specifications on page 71. * As rated by the engine manufacturer.

The tachometer / bladeshaft rpm gauge indicates engine rpm or bladeshaft rpm. Bladeshaft rpm range is colour-coded to gear selection position.

Product specifications. FS 4800 D, 660 mm blade guard, rear pivot with clutch FS 4800 D, 660 mm blade guard, front pivot with clutch and electrical tracking FS 4800 D, 900mm blade guard, rear pivot 3 - speed gear box FS 4800 D, 900 mm blade guard, front pivot 3-speed gearbox

965 16 52 21 965 16 52 09 965 16 52 35 965 16 52 29

Diamond blades. MATERIAL CU R E D C O NC RE T E , H A R D CU R E D C O NC RE T E , M E DI UM A S P H A LT, HARD A S P H A LT, SO FT

Read more on page

FS 810

l l

– – –

CU R E D C O NC RE T E , SO F T

l = Optimal l = Good l = Acceptable

FS 800

– = Not recommended

– – –

FS 830

–

l l

FS 890

– – –

– –

l l

Blade guard slip-on.

Dual light kit.

Catalytic converter kit, for outdoor use only.

spare parts.

accessories. A A A B C

Blade guard slip-on, 450 mm Blade guard slip-on, 600 mm Blade guard slip-on, 750 mm Dual light kit Catalytic converter kit

542 19 87 78 542 20 32 66 542 20 33 05 542 18 11 17 504 61 12 02

3 speed blade shaft belts 355, 450, 650 and 750 mm × 4 1 speed blade shaft belts 355 mm × 4 1 speed blade shaft belt 450 mm × 4 1 speed blade shaft belts 650 and 750 mm × 4 Blade collar (outer flange with drive pin), 114 mm Blade collar (outer flange with drive pin), 127 mm Drive pin, 450 – 750 mm Bladeshaft wrench Front wheel Rear wheel Air filter, outer Air filter, inner Engine oil filter Hydraulic oil filter Fuel filter

542 20 64-47 542 18 60-48 542 19 04-16 542 19 84-41 542 16 31-72 542 16 63-07 505 53 19-01 539 30 01-33 542 19 17-16 542 19 88-42 542 16 64-53 542 16 64-54 542 20 63-69 542 16 64-49 542 20 63-60

Husqvarna fs 4400 D.

applications.

technical specifications.

Large jobs such as airports, highways, service work and other applications where production is a concern. ■ Ideal for heavy-duty commercial, industrial and paving. applications. ■ Available with a 3-speed gearbox.

Power Power at blade shaft Diamond blade, max Cutting depth, max Weight

Benefits.

Product specifications.

■

Diesel-powered self-propelled saw has a low noise enclosed design. ■ 44 hp Kubota water-cooled engine. ■ Turbocharged-altitude compensator. ■ Available in rear pivot only for maneuverability in road repair and service work. ■ Heavy-duty steel frame. ■ Fully enclosed differential. ■ Control panel is conveniently placed for easy operation. ■ Direct spindle drive or 3-speed gearbox for optimum cutting performance ■

More technical specifications on page 71.* As rated by the engine manufacturer.

FS 4400 D, 500mm, rear pivot FS 4400 D, 750mm, 3-speed rear pivot

965 97 92 01 965 97 93 05

accessories. A Blade guard slip-on, 450 mm A Blade guard slip-on, 650 mm A Blade guard slip-on, 750 mm

Control panel with two side handwheels for manual drive of the saw.

32 kW, 44 hp 24 kW, 33 hp 750 mm 300 mm 535 kg

523 20 10 01 523 20 15 01 522 50 66 17

Husqvarna fs 627.

applications. ■

Perfect for all small service work such as paving, warehouses, footpaths and other commercial and industrial applications.

Benefits.

Self-propelled saw has a low noise enclosed design. 27 hp Kohler water-cooled engine. ■ Available in front pivot. ■ Heavy-duty steel frame. ■ Fully enclosed differential. ■ Control panel is conveniently placed for easy operation. ■ ■

technical specifications. Power Diamond blade, max Cutting depth, max Weight

20 kW, 27 hp 750 mm 300 mm 295 kg

More technical specifications on page 72.* As rated by the engine manufacturer.

Product specifications. FS 627, 500 mm, front pivot

966 43 35 02

Husqvarna fs 524.

Self-contained differential drive system eliminating drive gear from rear wheels and related wear. It is simple to handle and maintain.

Patent-pending low-vibration engine mount offering a greater comfort in work.

technical specifications.

applications. ■

Medium to small service and repair work jobs where a self propelled saw is needed for production.

Benefits.

Innovative series of self-propelled small flat saws with blade capacities of 500 to 600 mm. ■ Patent-pending engine and bladeshaft mounting system reduce vibrations and give better cutting performance. ■ Patented IntelliSeal bladeshaft system allows for a minimum of 250 maintenance-free hours and eliminates daily greasing of bearings. ■ Patent-pending spring-assist screw feed adjustment reduces the force required to adjust the blade in and out of the cut. ■

FS 524* engine: Honda, petrol Diamond blade, max Cutting depth, max Weight

15.3 kW *, 20hp 600 / 500 mm 220 / 190 mm 231 / 197 kg

More technical specifications on page 72. * As rated by the engine manufacturer. *Available special order only.

Product specifications. FS 524

965 15 02 11

Diamond blades. MATERIAL

420

l l

CU R E D C O NC RE T E , H A R D CU R E D C O NC RE T E , M E DI UM CU R E D C O NC RE T E , SO F T ASPH A LT, HARD A S P H A LT, SO FT

Read more on page l = Optimal l = Good l = Acceptable

– = Not recommended

450

– –

480

– – –

– –

l l

accessories. A Blade guard 600 mm, FS 524

542 20 40 89

spare parts. Blade shaft belt, FS 524 Blade collar outer flange Drive pin Hydrostatic transmission drive belt Hydrostatic drive belt Rear wheels Front wheels Water tank kit

504 06 83-01 542 16 79-62 505 53 19-01 510 23 73-21 542 20 41 17 542 19 88-42 543 04 59-49 541 20 82-86

Blade guard.

Husqvarna fs 413.

Comprehensive console with engine throttle, emergency stop switch, tachometer, timer and depth indicator. The patented IntelliSeal blade spindle has four sealed radial bearings for strength and durability.

applications. ■

technical specifications.

Medium to small service and repair jobs.

Benefits.

A compact push saw with a clear focus on ergonomics. Patent-pending engine and bladeshaft mounting system reduce overall vibration and produce better cutting performance. ■ Patented IntelliSeal bladeshaft system allows for a minimum of 250 maintenance-free hours and eliminates daily greasing of bearings. ■ Patent-pending spring-assist screw feed adjustment reduces the force required to adjust the blade in and out of the cut. ■ Compact and easy to transport. ■ ■

FS 413 engine: Honda, petrol Diamond blade, max Cutting depth, max Weight

8.2 kW * 500 mm 190 mm 163 /145 kg

More technical specifications on page 73. * As rated by the engine manufacturer.

Product specifications. FS 413

965 15 01 09

Diamond blades. MATERIAL

420

l l

CU R E D C O NC RE T E , H A R D CU R E D C O NC RE T E , M E DI UM CU R E D C O NC RE T E , SO F T ASPH A LT, HARD A S P H A LT, SO FT

Read more on page l = Optimal l = Good l = Acceptable

– = Not recommended

450

– –

480

– – –

– –

l l

Blade guard.

Water tank kit.

Accessories. A Blade guard 500 mm, FS 413 B Water tank kit

542 20 40 89 541 20 82 86

Spare parts.

Precision bearing hinge blade guard system reduces wear and noise.

Blade shaft belt, FS 413 Blade collar outer flange Drive pin Rear wheels Front wheels Blade shaft wrench

542 20 21-50 542 16 79-62 505 53 19-01 543 04 59-51 543 04 59-49 542 20 22-92

Husqvarna fs 300 series. applications.

Very small road repair jobs. Cutting small trenches for pipe laying. ■ Cutting in difficult to access job sites. ■ ■

Benefits.

Very light weight (64 /54 kg), facilitating transport and handling. ■ Adjustable handle and extendable right rear wheel for increased stability. ■ Patent-pending assisted raise / lower system using gas spring. ■ Excellent power transmission to the blade thanks to the Poly-V belt. ■

technical specifications. FS 309 engine: Robin, petrol Diamond blade, max Cutting depth, max Weight

6.7 kW *, 9hp 350 mm 120 mm 64 / 54 kg

More technical specifications on page 73. * As rated by the engine manufacturer.

Product specifications. FS 309, Robin engine, water tank

965 15 00 15

spare parts. Poly-V belt, FS 309 Wheel front Wheel back Wrench 13" Wrench 16" and 18" Outer flange Inner flange Bolt for flanges Pulley blade shaft, FS 309 Water injectors blade guard

With retracted handle, the saw can easily be placed in a car.

502 08 31-01 543 04 59-48 543 04 59-50 543 04 58-91 543 04 59-04 504 06 40-01 543 08 08-89 725 25 34-71 543 08 32-68 543 08 12-71

Diamond blades for fs 309. MATERIAL

420

l l

CU R E D C O NC RE T E , H A R D CU R E D C O NC RE T E , M E DI UM CU R E D C O NC RE T E , SO F T ASPH A LT, HARD A S P H A LT, SO FT

Read more on page l = Optimal l = Good l = Acceptable

– = Not recommended

450

– –

480

– – –

– –

l l

technical specifications for flat saws.

Engine manufacturer

FS 8400 D

FS 6600 D

John Deere

Engine specifications

5030TF270

4042TF270

Max power, kW (hp) *

62 (84)

49 (66)

Power at blade shaft, kW (hp)

53 (72)

44 (60)

Displacement, cc

3000

2400

Bore / Stroke, mm

86 / 105

Cylinders / Cycles

5/4

4/4

Fuel capacity, l

Oil capacity, l

11.2

Air filter

Multi-stage

Multi stage

Starter

Electric

Engine cooling

Liquid /Air

Motor, rpm

2800

Axle, front / rear

25.4 / Hydraulic

Wheels, front

203 × 76 × 25.4

Wheels, rear

254 × 76

Handlebar adjustment

Multi position

Transmission type

Dual motor

Transmission speeds, m / min

0 –100

Blade guard type

Slip-on / bolted

Max blade diameter, mm

1500

1000

Max depth of cut, mm

620

410

Arbor size, mm

25.4

Blade shaft diameter, mm

Number of belts

Blade depth control

Electrohydraulic

Blade flanges, mm

QDS 114 –254

QDS 114 –178

Weight, kg

1044 – 1085

850 – 885

Weight crated, kg

1085 – 1125

893 – 916

Dimensions, mm (L ×W × H)

1816 × 949 × 1632

1701 × 965 × 1448

Dimensions crated, mm (L ×W × H)

2070 × 1067 × 1550

1740 × 1067 × 1600

Sound pressure level, Lpa (dB)

94.8

Sound power level, Lwa (dB)

119

Hand-arm vibration Aeq, m / s²

3 – 3.6

Read more on page

* As rated by the engine manufacturer.

FS 4800 D

FS 4400 D

Yanmar

Kubota

TNV88

Diesel

35 (48)

34 (44)

30 (42)

24 (33)

2190

1500

88 / 90

78 / 78.5

4/4

29.5

7.4

6.7

Multi stage

–

Electric

Liquid /Air

3000

–

25.4 / Hydraulic

25.4 / 3-bolt hub mount

203 × 51

152 × 51

254 × 76

Multi position

Dual motor

Hydrostatic drive

0 –30 / 0 –70

–

Slip-on

750

300

25.4

Electrohydraulic

– – –

QDS 114 – 127

102

640 – 660

535

675 – 695

approx. 565

1422 × 845 × 1295

1092 × 736 × 1117

51 12

3 – 3.6

– – – –

1500 × 965 × 1300 91 113

technical specifications for flat saws.

FS 627

FS 524

Engine manufacturer

Kohler

Honda

Engine specifications

Petrol

GX670

Max power, kW (hp) *

20 (27)

15.3 (24) 670

Cylinders / Cycles

– – –

Fuel capacity, l

6.5

Displacement, cc Bore / Stroke, mm

Air filter

– –

Starter

Electric

Engine cooling

Air

Oil capacity

Handlebar adjustment

– – – – –

Transmission type

Hydrostatic drive

Motor, rpm Axle, front / rear Wheels, front Wheels, rear

77 / 67 2/4 1.9 Dry type canister Electric Air 3000 22 / 22 127 × 38 × 22 254 × 76 × 22 Yes Hydrostatic transaxle

Transmission speeds, m / min

–

0 – 26

Blade guard type

Slip-on

Max blade diameter, mm

750

600

Max depth of cut, mm

300

220

Arbor size, mm

25.4

– –

Poly-V

Blade depth control Blade flanges, mm

102

114

Weight crated, kg

295

271

Dimensions, mm (L ×W × H)

1003 × 647 × 990

1750 × 660 × 1200

Number of belts

Hand-arm vibration Aeq, m / s²

– – – –

Read more on page

Dimensions crated, mm (L ×W × H) Sound pressure level, Lpa(dB) Sound power level, Lwa (dB)

* As rated by the engine manufacturer.

Handwheel

1360 × 800 × 1130 94 104 3.5 64

FS 413

FS 309

FS 305

Honda

Robin

Honda

GX390

GX270

GX160

10 (13)

6.7 (9)

3.5 (4.8) 163

389

270

88 / 64

77 / 58

68 / 45

1/4

6.1

5.3

3.1

1.1

0.6

Cyclone dry dual

Cord

Air

Air 3600

3000

25.4 / 25.4

20 / 20

125 × 40 × 20

100 × 35 × 20

203 × 51 × 25.4

160 × 35 × 20

Yes

– –

Slip-on

Bolted

500

350

190

120

25.4

Poly-V

Handwheel

114

178

1550 × 655 × 1200

915 × 381 × 990

1125 × 725 × 1125

975 × 505 × 850

106

100

Husqvarna’s range of diamond tools for flat sawing are designed to work in all types of material and with all types of saws, from small electric units to large diesel machines. All our blades for abrasive applications are fitted with undercut protection and we offer the highest possible performance in terms of cutting speed, blade durability, consistency and product reliability.

Blade diameters range from 300 to 1520 mm and are divided into three groups: the 400, 800 and 1200 series. Husqvarna also offers the L 600 range of blades for slot cutting for electric and electronic cables as installation of traffic loops. The same blades could also be used in other joint widening applications.

application chart. MATERIAL

WET CUTTING FS 1200 DIAGRIP TM

FS 800 SERIES

50-120 HP CU R E D C O NC RE T E , H A R D CU R E D C O NC RE T E , M E DI UM CU R E D C O NC RE T E , SO F T GREEN CONCRETE, HARD GREEN CONCRETE, SOFT A S P H A LT, HARD A S P H A LT, SO FT

Read more on page l = Optimal l = Good l = Acceptable

– = Not recommended

50 ➞ 60 HP

FS 1240

FS 800

FS 810

l l l

l l

– – – –

– – – – –

FS 830

–

l l l l

FS 890

– – – – –

– –

l l

DiamonD BlaDEs for flat sawing

Diagrip™ is a revolutionary new segment production technology with a special treatment that ensures an optimal distribution of the diamonds, wich gives blades with superior cutting durability and capacity.

The Husqvarna range of flat saw blades includes the Diagrip™ blades F 1240, diamond tools with superior cutting capacity in all types of concrete.

400 T15 SERIES

400 SERIES

25 - 35 HP 420 T15

> 25 HP 450 T15

–

– – – – 80

The shape of the segment means that you get a smooth and free-cutting start.

420

450

–

l l

– – – –

– –

l l l

– –

– – – –

480

DiamonD BlaDEs for HigH PowErED flat saws

Husqvarna FS 1200 Series. CURED CONCRETE BLADES, 50 – 120 HP

The ultimate performance blade designed for highest productivity on saws (50 –120 hp) and provides the longest life and fastest cutting speed at the lowest cost per square metre. Available in diameters from 460 – 1810 mm. All diameters have a 12 mm segment height. HUSQVARNA FS 1240 DIAGRIP™

The Husqvarna FS 1240 is a blade for cured concrete with hard (quartz) to medium-hard (granite) aggregate. HUSQVARNA FS 1250 DIAGRIP™

The Husqvarna FS 1250 is a blade for cured concrete with medium (granite) to soft (limestone) aggregate. HUSQVARNA FS 1290 DIAGRIP™

The blade to use for all asphalt cutting situations with improved performances. Available with undercut protection if required for more abrasive or demanding applications.

revolutionary diamond tool technology for superior cutting capacity and durability. One of the greatest benefits with this new technology is how fast and smooth Diagrip™ tools cut in all types of construction materials, especially in heavily reinforced concrete. Diagrip™ tools mean trouble-free sawing, they just work their way through the toughest materials. The diamonds are specially treated to remain in place in the segments longer, and be distributed optimally, delivering maximum efficiency to every diamond. With Diagrip™, the diamonds are exposed and expended at an even rate, which makes the edge very even and powerful, even when cutting hard materials like reinforced concrete.

To optimise performance, the blades for highpowered saws have narrow water slots.

To protect against wear on the core, all our asphalt blades feature undercut protection in the form of a support segment or recessed drop segment.

MATERIAL

MACHINE POWER, 50 ➞ KW F 1240

l l l

CU R E D C O NC RE T E , H A R D CU R E D C O NC RE T E , M E DI UM CU R E D C O NC RE T E , SO F T

– –

ASPH A LT, HARD ASPHALT, SO FT l = Optimal l = Good l = Acceptable

– = Not recommended

PRODUCT UNDERCUT NUMBER PROTECTION HUSQVARNA F 1240

DIAMETER, MM

WATER SLOTS

SEGMENT LENGTH, MM

SEGMENT WIDTH, MM

SEGMENT HEIGHT, MM

BORE, MM

525 35 51 93 525 35 51 94 525 35 51 95 525 35 51 96 525 35 51 97 525 35 51 98 525 35 51 99 525 35 52 00 525 35 52 02

460 510 610 660 760 910 1070 1210 1520

Ugullet Ugullet Ugullet Ugullet Ugullet Ugullet Ugullet Ugullet Ugullet

40 40 40 40 40 40 40 40 40

4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5

12 12 12 12 12 12 12 12 12

25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4

– – – – – – – – –

Other dimensions available on request.

DiamonD BlaDEs for mEDiUm PowErED flat saws

Husqvarna FS 800 Series. CURED CONCRETE BLADES, 30 – 60 HP

Extreme performance blades designed for professional saws (30 – 60 hp) providing economical extended life and improved speed. Available in diameters 460 – 910 mm as standard. HUsQVarna fs 800

When speed is paramount, this extremely free cutting blade cuts through heavily reinforced and hard concrete with ease. Exceptional speed on the FS 4800 D. HUSQVARNA FS 810

For excellent cutting speed on extremely hard, heavy reinforced concrete typically with river type aggregates. All these blades now come with a 12 mm high segment. HUSQVARNA FS 830

A general purpose blade with excellent life and speed on a broad range of materials from extremely hard concrete to more softer abrasive concrete. HUSQVARNA FS 890

The blade to use for all asphalt cutting situations. Available with additional undercut protection if required for more abrasive or demanding applications.

MATERIAL

MACHINE POWER, 30 – 60 KW

CU R E D C O NC RE T E , H A R D CU R E D C O NC RE T E , M E DI UM CU R E D C O NC RE T E , SO F T

A S P H A LT, HARD A S P H A LT, SO FT

FS 810

l l l

– – – –

GREEN CONCRETE, HARD GREEN CONCRETE, SOFT

l = Optimal l = Good l = Acceptable

FS 800

– = Not recommended

– – – –

FS 830

FS 890

l l

– – –

– –

– – –

– –

PRODUCT DiameTeR, mm nUmbeR HUSQVaRna FS 800

bORe, mm

SLOT TYPe

nO. OF SeGmenTS SeGmenT LenGTH, mm

SeGmenT WiDTH, mm

SeGmenT HeiGHT, mm

577 92 13 01 577 92 13 02 577 92 13 03 577 92 13 04 577 92 13 05

25.4 25.4 25.4 25.4 25.4

Keyhole Keyhole Keyhole Keyhole Keyhole

30+6 35+7 38+8 45+9 56+8

4 4 4 4 4

12 12 12 12 12

BORE, MM

SLOT TYPE

NO. OF SEGMENTS SEGMENT LENGTH, MM

SEGMENT WIDTH, MM

SEGMENT HEIGHT, MM

25.4 25.4 25.4 25.4 25.4 25.4

Keyhole Keyhole Keyhole Keyhole Keyhole Keyhole

28+4 30+6 35+7 38+8 45+9 56+8

4 4 4 4 4 4

12 12 12 12 12 12

510 610 660 760 910

40 40 40 40 40

Other dimensions available on request. PRODUCT NUMBER

DIAMETER, MM

HUSQVARNA FS 810

5 2 5 3 5 51 67 5 2 5 3 5 51 68 5 2 5 3 5 51 69 5 2 5 3 5 51 70 5 2 5 3 5 51 71 5 2 5 3 5 51 72

460 510 610 660 760 910

40 40 40 40 40 40

Silent versions available on request. Diameters 305 and 360 mm with a thick segment of 6 mm or above, is available on request for all the FS 800 Series. PRODUCT NUMBER

DIAMETER, MM

BORE, MM

SLOT TYPE

NO. OF SEGMENTS SEGMENT LENGTH, MM

SEGMENT WIDTH, MM

SEGMENT HEIGHT, MM

25.4 25.4 25.4 25.4 25.4 25.4

Keyhole Keyhole Keyhole Keyhole Keyhole Keyhole

28+4 30+6 35+7 38+8 45+9 56+8

4 4 4 4 4 4

12 12 12 12 12 12

HUSQVARNA FS 830

5 2 5 3 5 51 73 5 2 5 3 5 51 74 5 2 5 3 5 51 75 5 2 5 3 5 51 76 5 2 5 3 5 51 77 5 2 5 3 5 51 78

460 510 610 660 760 910

40 40 40 40 40 40

Silent versions available on request. Diameters 305 and 360 mm with a thick segment of 6 mm or above, is available on request for all the FS 800 Series. PRODUCT NUMBER

DIAMETER, MM

BORE, MM

SLOT TYPE

NO. OF SEGMENTS SEGMENT LENGTH, MM

SEGMENT WIDTH, MM

SEGMENT HEIGHT, MM

25.4 25.4 25.4 25.4 25.4 25.4

Keyhole Keyhole Keyhole Keyhole Keyhole Keyhole

28+4 30+6 35+7 38+8 45+9 56+8

4 4 4 4 4 4

12 12 12 12 12 12

HUSQVARNA FS 890

5 2 5 3 5 51 79 5 2 5 3 5 51 80 5 2 5 3 5 51 81 5 2 5 3 5 51 82 5 2 5 3 5 51 83 5 2 5 3 5 51 84

460 510 610 660 760 910

40 40 40 40 40 40

Silent versions available on request. Diameters 305 and 360 mm with a thick segment of 6 mm or above, is available on request for all the FS 800 Series.

gEnEral PUrPosE DiamonD tools

Husqvarna 400 T 15 Series. CURED CONCRETE BLADES, 25 – 35 HP

A diamond tool for the professional. Full 15 mm diamond height for ultimate life and a unique turbo style segment for extreme speed of cut in the most demanding applications on a full range of medium to high powered machines. HUSQVARNA 420 T 15

A general purpose blade with extended life and speed on a broad range of materials from extremely hard concrete to more softer abrasive concrete. HUSQVARNA 450 T 15

Designed for extended life on hard reinforced concrete with a mixture of soft concrete or abrasive materials.

MATERIAL

MACHINE POWER, 25 ➞ 35 KW 420 T15

l l l

CU R E D C O NC RE T E , H A R D CU R E D C O NC RE T E , M E DI UM CU R E D C O NC RE T E , SO F T

– –

ASPH A LT, HARD ASPHALT, SO FT l = Optimal l = Good l = Acceptable

PRODUCT NUMBER

MACHINE POWER, < 25 ➞ 35 KW

450 T15

420

–

l l l l

450 COMBI

480

l l l l

l l

–

l l l

– –

– – –

– = Not recommended

DIAMETER, MM

BORE, MM

SLOT TYPE

SEGMENT LENGTH, MM

SEGMENT WIDTH, MM

SEGMENT HEIGHT, MM

25.4 25.4

Narrow Narrow

40 40

3.2 3.2

15 15

BORE, MM

SLOT TYPE

SEGMENT LENGTH, MM

SEGMENT WIDTH, MM

SEGMENT HEIGHT, MM

25.4 25.4

Narrow Narrow

40 40

3.2 3.2

15 15

HUSQVARNA 420 T15

5 2 5 3 6 30 01 5 2 5 3 6 31 01

355 415

Other dimensions available on request. PRODUCT NUMBER

DIAMETER, MM

HUSQVARNA 450 T15

5 2 5 3 6 43 01 5 2 5 3 6 44 01

355 415

Other dimensions available on request.

DiamonD blaDes for loW PoWereD flat saWs

Husqvarna 400 Series. CURED CONCRETE BLADES, < 25 HP

Premium Performance blades designed for affordable sawing on flat saws (up to 25 hp) whilst maintaining acceptable life and cutting speed. Available in diameters 300 â&#x20AC;&#x201C; 510 mm. HUSQVARNA 420

A general purpose blade with excellent life and speed on a broad range of materials from extremely hard concrete to more softer abrasive concrete. HUSQVARNA 450

Designed for extended life on reinforced concrete with a mixture of soft concrete or abrasive materials. HUSQVARNA 480

The blade to use for all asphalt cutting situations. Has a wide slot to assist flushing away the abrasive slurry.

PRODUCT NUMBER

DIAMETER, MM

BORE, MM

SLOT TYPE

SEGMENT LENGTH, MM

SEGMENT WIDTH, MM

SEGMENT HEIGHT, MM

HUSQVARNA 420 WHITE

5 2 5 3 6 26 01 5 2 5 3 6 27 01 5 2 5 3 6 28 01 5 2 5 3 6 29 01 5 2 5 3 5 51 20

305 355 415 460 510

25.4 25.4 25.4 25.4 25.4

Narrow Narrow Narrow Narrow Narrow

40 40 40 40 40

3.2 3.2 3.2 3.5 3.5

10 10 10 10 10

PRODUCT NUMBER

DIAMETER, MM

BORE, MM

SLOT TYPE

SEGMENT LENGTH, MM

SEGMENT WIDTH, MM

SEGMENT HEIGHT, MM

HUSQVARNA 450 COMBI

5 2 5 3 6 32 01 5 2 5 3 6 34 01 5 2 5 3 6 37 01 5 2 5 3 6 40 01 5 2 5 3 6 42 01

305 355 415 460 510

25.4 25.4 25.4 25.4 25.4

Narrow Narrow Narrow Narrow Narrow

40 40 40 40 40

3.2 3.2 3.2 3.5 3.5

10 10 10 10 10

PRODUCT NUMBER

DIAMETER, MM

BORE, MM

SLOT TYPE

SEGMENT LENGTH, MM

SEGMENT WIDTH, MM

SEGMENT HEIGHT, MM

25.4 25.4 25.4

Wide Wide Wide

40 40 40

3.2 3.2 3.2

10 10 10

HUSQVARNA 480 BLACK

5 2 5 3 6 45 01 5 2 5 3 6 46 01 5 2 5 3 6 48 01

305 355 415

Use the QR-tag to check out more about Soff-Cut.

EARLY ENTRY SAWING

How the system works

Range overview

Husqvarna Soff-Cut equipment and tools

Husqvarna Soff-Cut is a unique patented system for early entry concrete sawing. This technology enables concrete to be cut within the first one or two hours of finishing and before final set. Husqvarna Soff-Cut provides the best solution for minimising the risk of random cracking, and it simplifies the working process, compared to conventional sawing.

how the system works. ThE pRobLEm

As concrete hydrates and begins to set, it develops internal stresses. The objective in controlling shrinkage cracking is to relieve these stresses before they seek their own relief in the form of a random crack.

Of the problems facing concrete contractors, random cracking is among the most costly and aggravating.

ThE NEW SoLuTIoN

With the Husqvarna Soff-Cut Ultra Early Entry™ dry-cutting system, joints are sawn in the green zone – within the first hour or two after finishing. The Husqvarna Soff-Cut technology is based on the combination of the Soff-Cut blade and skid plate. The up-cutting rotation of the blade combines with the skid plate, which applies pressure to the surface to prevent chipping and spalling. Soff-Cut is the only system that allows you to cut in the green zone as part of the finishing process, to more effectively control shrinkage cracking. Soff-Cut has the unique Ultra Early Entry™ dry-cutting system which controls random cracking by making the cut at an early stage.

Use Soff-Cut joint protectors at saw-cut intersections prior to cross-cutting in order to prevent the corners from breaking down.

Early entry sawing – range overview. APPLICATION ■

■

■ ■

■

■ ■

■

PRODUCT

TECHNICAL SPECIFICATIONS

PAGE

Ultra Early EntryTM concrete cutting system husqvarna Soff-Cut 5000. for controlling shrinkage cracking and to reduce random cracking. Designed for peak performance usage on highways, runways and paving, and ideal for heavy-duty commercial, industrial and paving applications. Several blade widths can be used, allowing different joint widths and crack control simultaneously.

Engine, Kohler petrol Diamond blade, max Cutting depth, max Weight

20 kW, 27 hp* 350 mm 100 mm 225 kg

Ultra Early EntryTM concrete cutting system husqvarna Soff-Cut 4200. for controlling shrinkage cracking and to reduce random cracking. Designed for peak performance usage on highways, runways and paving, and ideal for heavy-duty commercial, industrial and paving applications. Multiple blade widths can be used, allowing different joint widths and crack control simultaneously.

Engine, Kohler petrol Diamond blade, max Cutting depth, max Weight

17.2 kW, 23 hp* 350 mm 76 mm 221 kg

Ultra Early EntryTM concrete cutting system husqvarna Soff-Cut 2500. for controlling shrinkage cracking and to reduce random cracking. Ideal for medium to heavy-duty commercial, industrial and paving applications. Three blade widths can be used, allowing for different joint widths and crack control simultaneously.

Engine, Kohler petrol Diamond blade, max Cutting depth, max Weight

9.6 kW, 13 hp* 250 mm 38 mm 158kg

Ultra Early EntryTM concrete cutting system husqvarna Soff-Cut 4000. for controlling shrinkage cracking and to reduce random cracking. Designed for peak performance usage on highways, runways, and paving, and ideal for heavy-duty commercial, industrial and paving applications. Three blade widths can be used, allowing different joint widths and crack control simultaneously.

Engine, Kohler petrol Diamond blade, max Cutting depth, max Weight

14.9 kW, 20 hp* 350 mm 76 mm 191 kg

Ultra Early EntryTM concrete cutting system husqvarna Soff-Cut 2000e. for controlling shrinkage cracking and to reduce random cracking. Ideal for medium to heavy-duty commercial, industrial and paving applications. Three blade widths can be used, allowing for different joint widths and crack control simultaneously.

Engine, Robin petrol Diamond blade, max Cutting depth, max Weight

6.5 kW, 9 hp* 250 mm 38 mm 144 kg

Ultra Early EntryTM concrete cutting system husqvarna Soff-Cut 150. for controlling shrinkage cracking and to reduce random cracking. Designed for residential and light commercial applications with minimal noise disruption.

Engine, Robin petrol Diamond blade, max Cutting depth, max Weight

3.3 kW, 4.5 hp* 150 mm 30 mm 39 kg

*As rated by the engine manufacturer.

Husqvarna Soff-Cut 5000. Applications.

Ultra Early Entry™ concrete cutting system to reduce random cracking. ■ Designed for highway, runway and paving applications. ■ Several blade widths can be used, allowing different joint widths and crack control simultaneously. ■

Benefits.

Self-propelled petrol saw with positraction drive, hydrostatic transmission and travel speed indicator. ■ Switch-activated electronic adjustable handles. ■ Master switch control panel. ■ Electronic remote key start and choke. ■ High-strength, lightweight aluminium frame. ■ 20 amp regulated charging system. ■ Switch-activated blade depth control and retractable guide. ■ Dual halogen headlight system ■ Adjustable depth of cut 50mm to 100mm ■ Patented dry-cut diamond blade, anti-ravel skid plate and safety arbor. ■ Patented low-noise and low-dust blade block enclosure. ■ Mechanical depth gauge. ■

Spare parts. Headlight/side light Ignition key, 2 pk Blade wrench

505 48 50 03 505 48 74 02 505 48 31 03

Joint protectors. Red, 150 pieces – 150, 200 and 250 mm blades Blue, 150 pieces – 300 and 350 mm blades

505 48 32 02 505 48 32 03

Technical specifications Engine, Kohler petrol Diamond blade, max Cutting depth, max Weight

20kW, 27 hp * 350 mm 100 mm 225 kg

*As rated by the engine manufacturer.

Product specifications. Soff-Cut 5000

966 84 57 03

Diamond blades for Soff-Cut 5000. PRODUCT NUMBER

NAME

DIAMETER, MM

SEGMENT SHAPE

SEGMENT LENGTH, MM

SEGMENT THICKNESS, MM

SEGMENT HEIGHT, MM

NUMBER OF SEGMENTS

BORE

Flat Flat

40 40

3 3

7 + 1.5 7 + 1.5

24 24

Soff-Cut Triangular Soff-Cut Triangular

PV 5000 SERIES: PAVER SAW BLADES

542 75 61 73 5 4 2 75 6 1 7 4

PV14-2000 PV14-4000

Additional blades on request.

356 356

husqvarna Soff-Cut 4200. Patented dry-cut diamond blade, anti-ravel skid plate and arbor. ■ Patented low-noise and low-dust blade block enclosure. ■ Mechanical depth gauge. ■

Technical specifications. Engine, Kohler petrol Diamond blade, max Cutting depth, max Weight

17.2 kW * 350 mm 76 mm 221 kg

*As rated by the engine manufacturer.

product specifications. Soff-Cut 4200

966 84 56 02

Spare parts. Side lights Air filter, 2 pieces Oil filter, 2 pieces Spark plug, 2 pieces Battery, 12 V DC

Applications.

Ultra Early Entry™ concrete cutting system for controlling shrinkage cracking and to reduce random cracking. ■ Designed for peak performance usage on highways, runways and paving, and ideal for heavy-duty commercial, industrial and paving applications. ■ Multiple blade widths can be used, allowing different joint widths and crack control simultaneously. ■

505 48 69-02 505 48 74-02 505 48 77-01 505 48 28-03 505 48 76-01

Joint protectors. Red, 150 pieces – 150, 200 and 250 mm blades Blue, 150 pieces – 300 and 350 mm blades

505 48 32 02 505 48 32 03

A Soff-Cut patented anti-ravel skid plate comes with every XL blade. This allows for same-day sawing without chipping and spalling.

benefits.

Self-propelled petrol saw with positraction drive, hydrostatic transmission and travel speed indicator. ■ Switch-activated electronic adjustable handles. ■ Electronic remote key start and choke. ■ High-strength, lightweight aluminium frame. ■ Switch-activated blade depth control and retractable guide. ■

Diamond blades for Soff-Cut 4200. PRODUCT NUMBER

NAME

DIAMETER, MM

SEGMENT SHAPE

SEGMENT LENGTH, MM

SEGMENT THICKNESS, MM

SEGMENT HEIGHT, MM

NUMBER OF SEGMENTS

BORE

3 3

7.5 + 1.5 7.5 + 1.5

20 24

Soff-Cut Triangular Soff-Cut Triangular

3 3

7.5 + 1.5 7.5 + 1.5

20 24

Soff-Cut Triangular Soff-Cut Triangular

3 3

7.5 + 1.5 7.5 + 1.5

20 24

Soff-Cut Triangular Soff-Cut Triangular

3 3

7.5 + 1.5 7.5 + 1.5

20 24

Soff-Cut Triangular Soff-Cut Triangular

3 3

7.5 + 1.5 7.5 + 1.5

20 24

Soff-Cut Triangular Soff-Cut Triangular

1000 SERIES: VERY HARD TO HARD AGGREGATE CONCRETE - PURPLE

5 4 2 75 6 1 0 5 5 4 2 75 6 1 1 2

XL12-1000 XL14-1000

305 350

Flat Flat

40 40

2000 SERIES: FIBRE STEEL AND HARD AGGREGATE CONCRETE - GREEN

5 4 2 75 6 1 0 6 5 4 2 75 6 1 1 3

XL12-2000 XL14-2000

305 350

Flat Flat

40 40

3000 SERIES: HARD TO MEDIUM-HARD AGGREGATE CONCRETE - RED

5 4 2 75 6 1 0 7 5 4 2 75 6 1 1 4

XL12-3000 XL14-3000

305 350

Flat Flat

40 40

4000 SERIES: MEDIUM TO HARD AGGREGATE CONCRETE - ORANGE

5 4 2 75 6 1 0 8 5 4 2 75 6 1 1 5

XL12-4000 XL14-4000

305 350

Flat Flat

40 40

5000 SERIES: SOFT TO MEDIUM-HARD AGGREGATE CONCRETE - YELLOW

5 4 2 75 6 1 0 9 5 4 2 75 6 1 1 6

XL12-5000 XL14-5000

Additional blades on request.

305 350

Flat Flat

40 40

Husqvarna Soff-Cut 2500. Applications.

Ultra Early Entry™ concrete cutting system to reduce random cracking. ■ Ideal for medium to heavy-duty usage on highways, runways, commercial, industrial and paving applications. ■ Three blade widths can be used, allowing different joint widths and crack control simultaneously. ■

Benefits.

Self-propelled petrol saw with positraction drive, hydrostatic transmission and travel speed indicator. ■ Switch-activated electronic adjustable handles. ■ Master switch control panel. ■ Electronic remote key start and choke. ■ High-strength, lightweight aluminium frame. ■ 10 amp regulated charging system. ■ Switch-activated blade depth control and retractable guide. ■ Patented dry-cut diamond blade, anti-ravel skid plate and safety arbor. ■ Patented low-noise and low-dust blade block enclosure. ■

Spare parts.

Technical specifications Headlight/side light Ignition key, 2 pk Blade wrench

505 48 50 03 505 48 74 02 505 48 31 03

Joint protectors.

Engine, Kohler petrol Diamond blade, max Cutting depth, max Weight

9.6kW, 13 hp * 250 mm 38 mm 158 kg

*As rated by the engine manufacturer.

Red, 150 pieces – 150, 200 and 250 mm blades Blue, 150 pieces – 300 and 350 mm blades

505 48 32 02 505 48 32 03

Product specifications. Soff-Cut 2500

966 84 54 01

Diamond blades for Soff-Cut 2500. PRODUCT NUMBER

NAME

DIAMETER, MM

SEGMENT SHAPE

SEGMENT LENGTH, MM

SEGMENT THICKNESS, MM

SEGMENT HEIGHT, MM

NUMBER OF SEGMENTS

BORE

2.6

7.5 + 1.5

Soff-Cut Triangular

2.6

7.5 + 1.5

Soff-Cut Triangular

3000 SERIES: HARD TO MEDIUM-HARD AGGREGATE CONCRETE - RED

5 4 2 75 6 1 0 2

XL10-3000

250

Flat

5000 SERIES: SOFT TO VERY SOFT AGGREGATE CONCRETE - YELLOW

5 4 2 75 6 1 0 4

XL10-5000

Additional blades on request.

250

Flat

husqvarna Soff-Cut 4000. benefits.

Self-propelled petrol saw with hydrostatic transmission. Electronic key start. ■ Electric blade depth control. ■ Mechanical remote retractable guide. ■ Patented dry-cut diamond blade, anti-ravel skid plate and arbor. ■ Patented low-noise and low-dust blade block enclosure. ■ ■

Technical specifications. Engine, Kohler petrol Diamond blade, max Cutting depth, max Weight

14.9 kW * 350 mm 76 mm 191 kg

*As rated by the engine manufacturer.

product specifications. Soff-Cut 4000

966 84 55 03

Accessories.

Applications.

Ultra Early Entry™ concrete cutting system for controlling shrinkage cracking and to reduce random cracking. ■ Designed for peak performance usage on highways, runways, and paving, and ideal for heavy-duty commercial, industrial and paving applications. ■ Three blade widths can be used, allowing different joint widths and crack control simultaneously. ■

Headlight kit

505 48 47-02

Spare parts. Air filter, 2 pieces Spark plug, 2 pieces Blade belt Pump belt Blade wrench

505 48 23-06 505 48 28-03 505 48 39 04 505 48 48-01 505 48 31-03

Joint protectors. Red, 150 pieces – 150, 200 and 250 mm blades Blue, 150 pieces – 300 and 350 mm blades

Joint protectors.

505 48 32 02 505 48 32 03

Headlight kit.

Diamond blades for Soff-Cut 4000. PRODUCT NUMBER

NAME

DIAMETER, MM

SEGMENT SHAPE

SEGMENT LENGTH, MM

SEGMENT THICKNESS, MM

SEGMENT HEIGHT, MM

NUMBER OF SEGMENTS

BORE

3 3

7.5 + 1.5 7.5 + 1.5

20 24

Soff-Cut Triangular Soff-Cut Triangular

3 3

7.5 + 1.5 7.5 + 1.5

20 24

Soff-Cut Triangular Soff-Cut Triangular

3 3

7.5 + 1.5 7.5 + 1.5

20 24

Soff-Cut Triangular Soff-Cut Triangular

3 3

7.5 + 1.5 7.5 + 1.5

20 24

Soff-Cut Triangular Soff-Cut Triangular

3 3

7.5 + 1.5 7.5 + 1.5

20 24

Soff-Cut Triangular Soff-Cut Triangular

1000 SERIES: VERY HARD TO HARD AGGREGATE CONCRETE - PURPLE

5 4 2 75 6 1 0 5 5 4 2 75 6 1 1 2

XL12-1000 XL14-1000

305 350

Flat Flat

40 40

2000 SERIES: FIBRE STEEL AND HARD AGGREGATE CONCRETE - GREEN

5 4 2 75 6 1 0 6 5 4 2 75 6 1 1 3

XL12-2000 XL14-2000

305 350

Flat Flat

40 40

3000 SERIES: HARD TO MEDIUM-HARD AGGREGATE CONCRETE - RED

5 4 2 75 6 1 0 7 5 4 2 75 6 1 1 4

XL12-3000 XL14-3000

305 350

Flat Flat

40 40

4000 SERIES: MEDIUM TO HARD AGGREGATE CONCRETE - ORANGE

5 4 2 75 6 1 0 8 5 4 2 75 6 1 1 5

XL12-4000 XL14-4000

305 350

Flat Flat

40 40

5000 SERIES: SOFT TO MEDIUM-HARD AGGREGATE CONCRETE - YELLOW

5 4 2 75 6 1 0 9 5 4 2 75 6 1 1 6

XL12-5000 XL14-5000

Additional blades on request.

305 350

Flat Flat

40 40

husqvarna Soff-Cut 2000e. Technical specifications. Engine, Robin petrol Diamond blade, max Cutting depth, max Weight

6.5 kW * 250 mm 38 mm 144 kg

*As rated by the engine manufacturer.

product specifications. Soff-Cut 2000e

966 84 53 01

Accessories. Headlight kit

505 48 47-01

Spare parts. Air filter Spark plug Blade belt Pump belt Blade wrench

505 48 23-02 505 48 28-01 505 48 22-02 505 48 40-02 505 48 31-03

Joint protectors.

Applications.

Ultra Early Entry™ concrete cutting system for controlling shrinkage cracking and to reduce random cracking. ■ Ideal for medium to heavy-duty commercial, industrial and paving applications. ■ Three blade widths can be used, allowing for different joint widths and crack control simultaneously. ■

Red, 150 pieces – 150, 200 and 250 mm blades Blue, 150 pieces – 300 and 350 mm blades

505 48 32 02 505 48 32 03

benefits.

Self-propelled petrol saw with electric start engine and hydrostatic transmission. ■ Electronic remote key start and choke. ■ Patented low-noise and low-dust blade block enclosure. ■ Built-in lifting system. ■ Mechanical remote retractable guide. ■ Roll cage frame. ■ Mechanical depth control. ■ Cyclonic air filter to increase engine longevity. ■ Non-stick low-density polyurethane wheels. ■

Headlight kit.

Joint protectors.

Diamond blades for Soff-Cut 2000e. PRODUCT NAME DIAMETER, SEGMENT SEGMENT NUMBER MM SHAPE LENGTH, MM 2000 SERIES: VERY HARD TO HARD AGGREGATE CONCRETE

SEGMENT THICKNESS, MM

SEGMENT HEIGHT, MM

NUMBER OF SEGMENTS

BORE

542 75 61-01

2.6

7.5 + 1.5

Soff-Cut Triangular

2.6

7.5 + 1.5

Soff-Cut Triangular

2.6

7.5 + 1.5

Soff-Cut Triangular

XL10-2000

250

Flat

3000 SERIES: HARD TO MEDIUM-HARD AGGREGATE CONCRETE

542 75 61-02

XL10-3000

250

Flat

5000 SERIES: SOFT TO VERY SOFT AGGREGATE CONCRETE

542 75 61-04

XL10-5000

Additional blades on request.

250

Flat

husqvarna Soff-Cut 150.

benefits.

Patented low-noise and low-dust blade block enclosure. 3.3 kW engine with cyclone air filter. ■ Mechanical blade depth control. ■ Non-marking and non-stick polyurethane wheels. ■ Retractable front guide system. ■ Folding handle. ■ Easy pull-start engine. ■ Patented arbor. ■ ■

Technical specifications. Engine, Robin petrol Diamond blade, max Cutting depth, max Weight

Applications.

3.3 kW * 150 mm 30 mm 39 kg

*As rated by the engine manufacturer.

Ultra Early Entry™ concrete cutting system for controlling shrinkage cracking and to reduce random cracking. ■ Designed for residential and light commercial applications with minimal noise disruption. ■

product specifications. Soff-Cut 150

966 84 48 05

Spare parts. Air filter Spark plug, 2 pieces Blade belt, 2 pieces Blade wrench

A Soff-Cut patented anti-ravel skid plate comes with every XL blade. This allows for same-day sawing without chipping and spalling.

505 48 23-01 505 48 28-01 505 48 22-01 505 48 31-02

Joint protectors. Red, 150 pieces – 150, 200 and 250 mm blades Blue, 150 pieces – 300 and 350 mm blades

505 48 32 02 505 48 32 03

Diamond blades for Soff-Cut 150. PRODUCT NAME DIAMETER, NUMBER MM 1000ND SERIES: LATE ENTRY SAWING

SEGMENT SHAPE

SEGMENT LENGTH, MM

SEGMENT THICKNESS, MM

SEGMENT HEIGHT, MM

NUMBER OF SEGMENTS

BORE

542 75 62 81

Flat

2.4

7 + 1.5

Soff-Cut Triangular

2.4

7 + 1.5

Soff-Cut Triangular

2.4

7 + 1.5

Soff-Cut Triangular

2.4

7 + 1.5

Soff-Cut Triangular

2.4

7 + 1.5

Soff-Cut Triangular

XL6-1000ND

150

1000 SERIES: VERY HARD AGGREGATE CONCRETE

542 77 70 05

XL6-1000

150

Flat

2000 SERIES: VERY HARD TO HARD AGGREGATE CONCRETE

542 77 70-06

XL6-2000

150

Flat

3000 SERIES: HARD TO MEDIUM-HARD AGGREGATE CONCRETE

542 77 70-07

XL6-3000

150

Flat

5000 SERIES: SOFT TO VERY SOFT AGGREGATE CONCRETE

542 77 70-09

XL6-5000

150

Flat

Additional blades on request.

SURFACE PREPARATION

Range overview

Benefit overview

Husqvarna Dual Drive Technology™

Husqvarna planetary grinders

100

Husqvarna dust collectors

108

Technical specifications for planetary grinders and dust collectors

112

Diamond tools for surface preparation and floor treatment products 114 Diamond tools for grinding and polishing

116

Floor treatment products

126

Husqvarna Hiperfloor™ method

128

Husqvarna’s surface preparation and dust collection systems boast a unique balance between the machine’s power and design, and the tool’s speed and efficiency. Their patented Dual Drive Technology™ sets them apart from other machines and provides users with unsurpassed control for everything from the preparation, grinding and polishing of concrete floors to the repair and polishing of terrazzo and other natural stone. With Husqvarna surface preparation machines you not only get a beautiful surface, you get a high-quality, hard-wearing floor.

Surface preparation – range overview. APPLICATIONS ■ ■ ■ ■ ■ ■

■ ■ ■ ■ ■ ■

■ ■ ■ ■ ■ ■ ■

■

PRODUCT

TECHNICAL SPECIFICATIONS

PAGE

All polishing and grinding applications – for both wet and dry grinding. Adhesives, coatings and screed removal. Concrete surface repair and flattening. Polishing of natural stone and terrazzo. Perfect for Hiperfloor™ concrete floor polishing system. Recommended dust collector DC 5500.

Husqvarna PG 820.

Power Voltage Power supply Grinding width Grinding disc Weight

12.5 kW 380–480 V 3-phase 820 mm 3 × 270 mm 440 kg

100

Husqvarna PG 680.

Power Voltage Power supply Grinding width Grinding disc Weight

12.5 kW 380–480 V 3-phase 680 mm 3 × 240 mm 385 kg

102

Excellent for residential and light commercial purposes. Can be used for both wet and dry grinding applications. Adhesives, coatings and screed removal. Concrete surface repair and flattening. Polishing of natural stone and terrazzo. Perfect for Hiperfloor™ concrete floor polishing system. Recommended dust collector for PG 530 3-phase is the DC 5500, and for PG 530 1-phase it’s the DC 3300.

Husqvarna PG 530.

Power Voltage Power supply Grinding width Grinding disc Weight

4.75 / 3.75 kW 380–480 / 220–240 V 3-phase / 1-phase 530 mm 3 × 240 mm 216 / 200 kg

104

Floor grinder for surface preparation and grinding of adhesive residue, paint and spackle on large concrete areas. Recommended dust collector DC 3300.

Husqvarna PG 400.

Power Voltage Rated current, max Power supply Speed Weight

4 kW 380–480 V 16 A 3-phase 1400 rpm 115 kg

106

APPLICATIONS ■

■

■ ■

■

■ ■ ■

PRODUCT

TECHNICAL SPECIFICATIONS

PAGE

Floor grinder for surface preparation and grinding of adhesive residue, paint and spackle on medium-sized concrete areas. Recommended dust collector DC 3300.

Husqvarna PG 280.

Power 3 / 2.2 kW Voltage 380–480 / 220–240 V Rated current, max 16 A Power supply 1-phase Speed 2800 / 1400 rpm Weight 70 kg

107

For the most demanding industrial applications, where high suction and flow are required to eliminate airborne dust. Highly mobile and versatile for both wet and dry applications when coupled with the Husqvarna PG 820, PG 680 or PG 530, 3-phase.

Husqvarna DC 5500.

Power Voltage Rated current, max Vacuum, max Suction inlet Weight

5.5 kW 380 – 480 V 16 A* 300 mbar Ø 75 mm 215 kg

108

Dust extraction unit for wet and dry applications. Has the suction capacity and filtration technology for even the toughest jobs, effectively eliminating airborne dust. Recommended for Husqvarna PG 530, PG 400 and PG 280.

Husqvarna DC 3300.

Power Voltage Rated current, max Vacuum, max Suction inlet Weight

3.3 kW 220–240 V 11 A 300 mbar Ø 75 mm 97 kg

109

Versatile dust collection unit for wet and dry applications. Ideal for smaller jobs when a high level of portability is wanted. Recommended with Husqvarna PG 400 and PG 280. Also with Husqvarna K 3000 Vac and DM 220.

Husqvarna DC 1400.

Power Voltage Rated current, max Vacuum, max Suction inlet Container capacity (l) Weight

1.4 kW 240 V 16 A 230 mbar Ø 40 mm 55 16 kg

110

* 32 A with PG 820 and PG 680.

NEW

High-level power and performance.

A unique 5-way sealing mechanism protects bearings and internal parts from aggressive concrete dust and slurry. This extends service life as well as the period before first service and between subsequent services.

Low impact on operatorâ&#x20AC;&#x2122;s body during operation, due to the ergonomic design of frame and handle.

Solid hard rubber wheels help the machine deliver smoother cutting and polishing.

The control box is clearly marked and easy to use. It regulates and controls various functions on the machine.

Dust collectors with primary and secondary filter housing for efficient containment of dust.

Superior industrial strength construction delivers an attractive yet robust and powerful machine.

The kicker bar is useful when tilting the machine back onto the floor because you can put your foot on the bar and use your body as a counter weight.

Low tool and maintenance cost per square metre.

Same direction rotation.

Counter rotation.

Husqvarna Dual Drive Technology™. Dual Drive Technology™ is an exclusive and patented twin motor drive system, revolutionising low-maintenance, gear-driven planetary head rotation system. Available only with the Husqvarna PG 820, PG 680 and PG 530. Dual Drive Technology™ allows the operator to selectively control speed or direction of either the planetary head or the discs – resulting in unlimited potential speed and direction combinations. The Husqvarna PG 820 and PG 680 offer the operator the freedom to set their machinery to counter-rotate for polishing applications and also enables you to choose to set both systems to rotate in the same direction for aggressive cutting. These genuinely multifunctional machines with multiple benefits are for the modern polishing and grinding operator.

Enables the operator to optimise the grinder for each application. ■ Individual speed and direction control for both planetary head and satellite discs. ■ Same direction of rotation creates more friction on diamond tools delivering wider width of grinding and higher productivity. ■ Opposite direction of rotation create less friction on diamond tools delivering less powerful grinding effect and easier handling. ■

Application optimisation via Dual Drive Technology™. APPLICATION

SAME DIRECTION ROTATION

COUNTERROTATION

DISC SPEED MEDIUM

HIGH

l l

l l l l l l l

–

l l

LIPPAGE R E M OVA L (STONE A N D T E R R A ZZO T I L E S )

– – – – – – –

R E-GRO U TI NG O F C O N C R E T E F L O O RS ( FO R HI P ER FLO O R™ S YS T E M )

–

R ESIN B O ND DI A M O N D S , C O N C RE T E

l l

CE R A MI C TI L E A DH E S I V E R E M OVA L R A I N - DA M AG E D S L A B R E C T I F I CAT I O N FL AT TE N IN G O F UN E V E N F L O O R S AG G R E S S I V E G R I N D I N G O F F L O O R S U R FAC E S R E M OVA L OF T H I C K CONTACT ADHESIVE

R E S I N B O N D D I A M O N D S , S TO N E

– – – – – –

LOW

l l l l l l l

E P OX Y C OAT I N G REMOVAL

PLANETARY SPEED

– – – – –

LOW

– – –

MEDIUM

HIGH

l l

l l l

–

l l

– –

l l l l

–

l l

–

– – – – –

–

The above chart lists some applications that can be performed using the PG 820 and PG 680 and demonstrates how Dual Drive Technology™ can be utilised to optimise the perfomance and productivity of the machine.

Husqvarna PG 820.

Redi Lock™ diamond holder disc. F

Use the QR-tag to check out more about PG 820.

Head lock.

Applications.

All polishing and grinding applications – for both wet and dry grinding. ■ Adhesives, coatings and screed removal. ■ Concrete surface repair and flattening. ■ Polishing of natural stone and terrazzo. ■ Perfect for Hiperfloor™ concrete floor polishing system. ■ Recommended dust collector DC 5500. ■

Benefits.

The ultimate choice for professional flooring contractors. ■ Dual Drive Technology™ – fully independent control of both planetary and satellite grinding heads in regards to speed and direction of rotation. This enables higher production rates. ■ Triple-headed grinder – more downward pressure and power can be delivered to grinding heads. More stable operation over undulating surfaces. ■ Wide grinding path. ■

100

Long machinery service life thanks to the 5-way sealing mechanism, the spring steel head system and all zincplated steel parts. ■ Gear-driven planetary head; premium quality belt for powering grinding heads. ■ Industrial strength construction (robust steel frame, strong single-piece aluminium cover). ■ Low tool cost. ■

Technical specifications. Power Voltage Power supply Grinding width Grinding disc Weight

12.5 kW 380–480 V 3-phase 820 mm 3 × 270 mm 440 kg

More technical specifications on page 112.

Product specifications. PG 820, 380–480 V, 3-phase

965 19 56 11

Resin holder disc.

Rubber skirt, non marking.

Resin holder disc replacement rubber pad. Resin holder disc replacement velcro pad.

Head lock screw.

Flexible grinding head spring steel replacement.

Silicone ring.

HR 820 head, for heavy removal and preparation.

Accessories. K A B C D E F G H I J K L

Redi Lock™ diamond holder disc Resin holder disc Rubber skirt, non marking Resin holder disc replacement rubber pad Resin holder disc replacement velcro pad Head lock Head lock screw Flexible grinding head spring steel replacement Silicone ring HR 820 head, for heavy removal and preparation Pin Silicone ring

502 53 22-01 502 53 18-01 502 53 46-01 502 53 19-01 502 53 20-01 502 53 44-01 725 53 70-55 502 53 42-01 502 53 43-01 502 53 38-01 522 65 98-03 502 53 39-01

Pin.

Silicone ring.

Diamond tools. STEP

GRIT SIZE

TOOL NAME PRODUCT NUMBER

QUANTITY

ROTATION

HEAD SPEED

DISC SPEED

NOTE

Disc backward Same direction Same direction

5 8 8

5–7 9 9

Recommended if glue or epoxy thickness > 4 mm. For starting – thin layer of abrasive glues. For starting – thin epoxies and plastic type glues.

REMOVAL OF CERAMIC GLUE AND THICK EPOXY

G 11X1 D G 1173 D G 1143 D

543 08 66-11 543 08 64-78 543 08 64-42

18 18 18

REMOVAL OF VINYL GLUE AND THIN EPOXY

G 1153 D G 1123 D

543 08 64-60 543 08 64-24

9 9

Same direction Same direction

8 8

10 10

For starting. For continuing if segment does not open. Black Jack glues.

543 08 64-96 543 08 64-80 543 08 64-44 543 08 64-26 543 08 64-07

18 18 18 18 18

Same direction Same direction Same direction Same direction Same direction

8 8 8 8 8

10 10 10 10 10

To remove the major damaged part. To start the second step. For continuing if G 1174 D does not open well. For continuing if G 1144 D does not open well. For use on extremely hard concrete only.

8 8 8 8 8 8 8

10 10 10 10 10 10 10

For starting. For continuing if G 1173 D does not open well. For continuing if G 1143 D does not open well. For use on extremely hard concrete only. To start the second step if G 1173 D is used. For use if G 1143 D or G 1123 D is used in first step. For use if G 1115 D does not open well.

RAIN-DAMAGED CONCRETE

1 2

20 30

G 1183 D G 1174 D G 1144 D G 1124 D G 1114 S

CONCRETE GRINDING – PREPARATION FOR EPOXY LAYING AND SEALER

G 1173 D G 1143 D G 1123 D G 1113 S G 1145 D G 1115 D G 1115 S

543 08 64-78 543 08 64-42 543 08 64-24 543 08 64-05 543 08 64-48 543 08 64-12 543 08 64-11

18 18 18 18 18 18 9

Same direction Same direction Same direction Same direction Same direction Same direction Same direction

Read more about diamond tools for surface preparation and floor treatment products on page 114

101

Husqvarna PG 680.

Redi Lock™ diamond holder disc. F

Head lock.

Applications.

Benefits.

An excellent machine with power and a versatile size. ■ At 680 mm, it will fit through a standard door making it accessable to most projects. ■ Dual Drive Technology™ – fully independent control of both planetary and satellite grinding heads in regards to speed and direction of rotation. This enables higher production rates. ■ Triple-headed grinder – more downward pressure and power can be delivered to grinding heads. More stable operation over undulating surfaces. ■ Market-leading power-to-weight ratio. ■

102

Technical specifications. Power Voltage Power supply Grinding width Grinding disc Weight

12.5 kW 380–480 V 3-phase 680 mm 3 × 240 mm 385 kg

More technical specifications on page 112.

Product specifications. PG 680, 380–480 V, 3-phase

965 19 57 11

Resin holder disc.

Rubber skirt, non marking.

Resin holder disc replacement rubber pad. Resin holder disc replacement velcro pad.

Head lock screw.

Flexible grinding head spring steel replacement.

Silicone ring.

HR 680 head, for heavy removal and preparation.

Accessories. K A B C D E F G H I J K L

Redi Lock™ diamond holder disc Resin holder disc Rubber skirt, non marking Resin holder disc replacement rubber pad Resin holder disc replacement velcro pad Head lock Head lock screw Flexible grinding head spring steel replacement Silicone ring HR 680 head, for heavy removal and preparation Pin Silicone ring

502 54 58-01 502 54 51-01 502 54 86-01 502 54 55-01 502 54 56-01 502 53 44-01 725 53 70-55 502 54 82-01 502 53 43-01 502 54 78-01 522 65 98-03 502 53 39-01

Pin.

Silicone ring.

Diamond tools. STEP

GRIT SIZE

TOOL NAME PRODUCT NUMBER

QUANTITY

ROTATION

HEAD SPEED

DISC SPEED

NOTE

Disc backward Same direction Same direction

5 8 8

5–7 9 9

Recommended if glue or epoxy thickness > 4 mm. For starting – thin layer of abrasive glues. For starting – thin epoxies and plastic type glues.

REMOVAL OF CERAMIC GLUE AND THICK EPOXY

G 11X1 D G 1173 D G 1143 D

543 08 66-11 543 08 64-78 543 08 64-42

18 18 18

REMOVAL OF VINYL GLUE AND THIN EPOXY

G 1153 D G 1123 D

543 08 64-60 543 08 64-24

9 9

Same direction Same direction

8 8

10 10

For starting. For continuing if segment does not open. Black Jack glues.

543 08 64-96 543 08 64-62 543 08 64-26 543 08 64-08 543 08 64-07

18 18 18 18 18

Same direction Same direction Same direction Same direction Same direction

8 8 8 8 8

10 10 10 10 10

To remove the major damaged part. To start the second step. For continuing if G 1154 D does not open well. For continuing if G 1124 D does not open well. For use on extremely hard concrete only.

8 8 8 8 8 8 8

10 10 10 10 10 10 10

For starting. For continuing if G 1173 D does not open well. For continuing if G 1143 D does not open well. For use on extremely hard concrete only. To start the second step if G 1173 D is used. For use if G 1143 D or G 1123 D are used in first step. For use if G 1115 D does not open well.

RAIN-DAMAGED CONCRETE

1 2

20 30

G 1183 D G 1154 D G 1124 D G 1114 D G 1114 S

CONCRETE GRINDING – PREPARATION FOR EPOXY LAYING AND SEALER

G 1173 D G 1143 D G 1123 D G 1113 S G 1145 D G 1115 D G 1115 S

543 08 64-78 543 08 64-42 543 08 64-24 543 08 64-05 543 08 64-48 543 08 64-12 543 08 64-11

18 18 18 18 18 18 9

Same direction Same direction Same direction Same direction Same direction Same direction Same direction

Read more about diamond tools for surface preparation and floor treatment products on page 114

103

Husqvarna PG 530.

Redi Lock™ diamond holder disc. F

Head lock.

Applications.

Excellent for residential and light commercial purposes. ■ Can be used for both wet and dry grinding applications. ■ Adhesives, coatings and screed removal. ■ Concrete surface repair and flattening. ■ Polishing of natural stone and terrazzo. ■ Perfect for Hiperfloor™ concrete floor polishing system. ■ Recommended dust collector for PG 530 3-phase is the DC 5500, and for PG 530 1-phase it’s the DC 3300. ■

Benefits.

Powerful 3-phase and 1-phase versions. ■ Triple-headed grinder – more downward pressure and power can be delivered to grinding heads. More stable operation over undulating surfaces. ■ FWD / REV operation with variable speed control. ■ Long machinery service life thanks to the 5-way sealing mechanism. ■ Gear-driven planetary head; premium quality belt for powering grinding heads. ■ Industrial strength construction (robust steel frame, strong single-piece aluminium cover). ■ Weight just 200 kg. ■

104

Low tool cost. ■ Ease of manoeuvrability and enhanced operator control. ■

Technical specifications PG 530 (3-phase). Power Voltage Power supply Grinding width Grinding disc Weight

4.75 kW 380–480 V 3-phase 530 mm 3 × 240 mm 216 kg

Technical specifications PG 530 (1-phase). Power Voltage Power supply Grinding width Grinding disc Weight

3.75 kW 220–240 V 1-phase 530 mm 3 × 240 mm 200 kg

More technical specifications on page 112.

Product specifications. PG 530, 220–240 V, 1-phase PG 530, 380–480 V, 3-phase

965 19 58 18 965 19 58 19

Resin holder disc.

Rubber skirt, non marking.

Head lock screw.

Resin holder disc replacement rubber pad. Resin holder disc replacement velcro pad. I

Water kit.

Replacement flexible grinding head.

Pin.

Accessories. K A b c d E F G H I J K

Redi Lock™ diamond holder disc Resin holder disc Rubber skirt, non marking Resin holder disc replacement rubber pad Resin holder disc replacement velcro pad Head lock Head lock screw Water kit Replacement flexible grinding head Pin Silicone ring

502 54 58-01 502 54 51-01 502 55 89-01 502 54 55-01 502 54 56-01 502 53 44 01 725 53 70 55 505 45 32-01 502 55 82-01 522 65 98-03 502 53 39-01

Silicone ring.

Diamond tools. STEP

GRIT SIZE

TOOL NAME PROdUcT NUMbER

QUANTITY

ROTATION

dISc SPEEd

NOTE

Same direction Same direction Same direction

8–9 8–9 8–9

For starting – thin layer of abrasive glues. For starting – thin epoxies and plastic type glues. For continuing if G 1123 D does not open well.

REMOVAL OF cERAMIc GLUE ANd THIcK EPOXY

G 1153 D G 1123 D G 1123 S

543 08 64-60 543 08 64-24 543 08 64-23

18 18 18

REMOVAL OF VINYL GLUE ANd THIN EPOXY

G 1153 D G 1123 D G 1123 S

543 08 64-60 543 08 64-24 543 08 64-23

9 9 9

Same direction Same direction Same direction

8 – 10 8 – 10 8–9

For starting. For continuing if segment does not open. Black Jack glues. For continuing if G 1123 D still does not open well.

543 08 64-78 543 08 64-79 543 08 64-43 543 08 64-25 543 08 64-07

18 18 18 18 18

Same direction Same direction Same direction Same direction Same direction

8 – 10 8 – 10 8 – 10 8 – 10 8 – 10

To remove the major damaged part. To start the second step. For continuing if G 1174 S does not open well. For continuing if G 1144 S does not open well. For use on extremely hard concrete only.

8 – 10 8 – 10 8 – 10 8 – 10 8 – 10

For starting. For continuing if G 1143 D does not open well. For continuing if G 1143 S does not open well. To start the second step if G 1143 D used. For use if G 1143 S or G 1123 S are used in first step.

RAIN-dAMAGEd cONcRETE

1 2

20 30

G 1173 D G 1174 S G 1144 S G 1124 S G 1114 S

cONcRETE GRINdING – PREPARATION FOR EPOXY LAYING ANd SEALER

G 1143 D G 1143 S G 1113 S G 1125 D G 1115 S

543 08 64-42 543 08 64-41 543 08 64-05 543 08 64-30 543 08 64-11

18 18 18 18 18

Same direction Same direction Same direction Same direction Same direction

Read more about diamond tools for surface preparation and floor treatment products on page 114.

105

Husqvarna PG 400.

The PG 400 and PG 280 are light and easy to transport: the handle can be folded over the machine to make it more compact.

Applications.

Technical specifications.

Floor grinder for surface preparation and grinding of adhesive residue, paint and spackle on large concrete areas. ■ Recommended dust collector DC 3300.

Power Voltage Rated current, max Power supply Speed Weight

■

Benefits.

More technical specifications on page 112.

Efficient grinding thanks to the high rpm levels and the wide range of grinding discs available. ■ The efficient suction of grinding dust is a result of the design of the dust guard and vacuum port. ■ Easy and convenient to use, with ergonomically designed handlebar and low noise levels. ■ 4 kW 3-phase motor. ■

Product specifications. PG 400, 380–480 V, 3-phase, 5 pin

Diamond tools for PG 400 and PG 280. STEP

GRIT SIZE

TOOL NAME

PRODUCT NUMBER

QUANTITY QUANTITY NOTE PG 400 PG 280

REMOVAL OF CERAMIC GLUE AND THICK EPOXY

–

G 11X1 D

543 08 66-11

–

REMOVAL OF VINYL GLUE AND THIN EPOXY

G 1153 D

543 08 64-60

–

G 1114 D G 1174 D

543 08 64-08 543 08 64-80

8 8

6 6

To use on hard concrete. To use in abrasive conditions for more life.

8 8 8

6 6 6

To use on hard concrete. To use in abrasive conditions for more life. –

CONCRETE GRINDING

PREPARATION FOR EPOXY LAYING AND SEALER

G 1114 D G 1174 D G 1155 D

543 08 64-08 543 08 64-80 543 08 64-66

Read more about diamond tools for surface preparation and floor treatment products on page 114.

106

4 kW 380–480 V 16 A 3-phase 1400 rpm 115 kg

966 98 75-02

Husqvarna PG 280.

Single grinding plate with multiple diamond tool distribution positions.

The efficient suction of grinding dust is a result of the design of the dust guard and vacuum port.

Use the QR-tag to check out more about PG 280.

Easy and convenient to use, with ergonomically designed handlebar.

Applications.

Technical specifications PG 280 (3-phase).

Floor grinder for surface preparation and grinding of adhesive residue, paint and spackle on medium-sized concrete areas. ■ Recommended dust collector DC 1400.

Power Voltage Rated current, max Power supply Speed Weight

■

Benefits.

3 kW 380–480 V 16 A 3-phase 2800 rpm 70 kg

Technical specifications PG 280 (1-phase). Power Voltage Rated current, max Power supply Speed Weight

2.2 kW 220–240 V 15 A 1-phase 1400 rpm 70 kg

More technical specifications on page 112.

Product specifications. PG 280, 220–240 V, 1-phase

966 98 74 09

Accessories for PG 400 and PG 280.

Redi Lock™ resin pad adapter.

Rubber skirt.

A Redi Lock™ resin pad adapter, Ø 75 mm B Rubber skirt, PG 280

574 65 37-01 574 27 20-01

107

Husqvarna DC 5500.

Applications.

For the most demanding industrial applications, where high suction and flow are required to eliminate airborne dust. ■ Highly mobile and versatile for both wet and dry applications when coupled with the Husqvarna PG 820, PG 680 or PG 530, 3-phase. ■

Benefits.

Three-way filtering system for efficient containment of dust. ■ Efficient particle filtration rate of 99.9% @ 1 micron. ■ Quiet in operation and compact in design. ■ Unique bag – disposal system for containment of messy and hazardous substances. ■ Built-in phase correction for additional protection of vacuum pump and electronic circuitry. ■ Power outlet for Husqvarna PG 680 and PG 820. ■ 75 mm hose inlet. ■ Washable polyester filters. ■ Folds down to reduce height, for easier transport in vans. ■ Easy to service. ■ Robust diecast aluminium hose fittings. ■

Technical specifications. Power Voltage Rated current, max Vacuum, max Suction inlet Weight

5.5 kW 380 – 480 V 16 A* 300 mbar Ø 75 mm 215 kg

* 32 A with PG 820 and PG 680. More technical specifications on page 112.

Product specifications. DC 5500, 380–480 V, 3-phase, 5 pin

Vacuum hosing with end fittings. G

Black 3" ring.

108

Vacuum wand with floor tool. H

Replacement strap.

Plastic adaptor. I

Primary filter for DC 5500.

965 19 59 12

Replacement brush kit. J

Primary filter for DC 3300.

Husqvarna DC 3300.

Applications.

Dust extraction unit for wet and dry applications. ■ Has the suction capacity and filtration technology for even the toughest jobs, effectively eliminating airborne dust. ■ Recommended for Husqvarna PG 530, PG 400 and PG 280. ■

DC 3300 filter assembly.

Benefits.

3 × 1100 W motors. ■ Efficient particle filtration rate of 99.9% @ 1 micron. ■ Three-stage filtration mechanism – maximum protection for vacuum motors. ■ Electronic vibrator system for cleaning of filters. ■ Unique bag – disposal system for containment of messy and hazardous substances. ■ Quiet in operation and compact in design. ■ Handles up to 75 mm hosing. ■ Designed to plug into 220–240 V domestic /residential power supplies. ■ Washable polyester filters. ■ All metal super-industrial strength construction. ■ Easy to service. ■ Robust diecast aluminium hose fittings. ■

Technical specifications. Power Voltage Rated current, max Vacuum, max Suction inlet Weight More technical specifications on page 112.

Product specifications. DC 3300, 220–240 V, 1-phase

Replacement rubber strips kit. K

Secondary filter for DC 5500.

Dust collection bags. L

3.3 kW 220–240 V 11 A 300 mbar Ø 75 mm 97 kg

965 19 60 09

Accessories DC 5500 and DC 3300. A A B B B C D E F G H I J K L

3" vacuum hosing with end fittings (10 m) 2" vacuum hosing with end fittings (10 m) Vacuum wand with floor tool Vacuum wand Floor tool Plastic adaptor Replacement brush kit Replacement rubber strips kit Dust collection bags (box of 200) Black 3" ring Replacement strap DC 5500 Primary filter (filter sock) DC 3300 Primary filter (filter sock with end cap) DC 5500 Secondary filter (polyester) / micro filter DC 3300 Secondary filter (polyester) / micro filter

502 56 96 01 502 56 98-01 502 57 03-01 502 57 03-03 502 57 03-02 505 53 94-01 510 27 85-01 521 91 21-01 502 57 01-01 502 53 40-05 502 57 02-01 502 56 93-01 502 57 30-01 502 56 95-01 502 57 32-01

Secondary filter for DC 3300.

109

NEW

Husqvarna DC 1400.

Benefits.

Compact design, low weight, highly portable. ■ Automatic dust filter cleaning prevents clogging while working. ■ Auxiliary start /stop system enables remote start /stop of the DC 1400 when starting /stopping a connected hand tool (max 1200 W). ■ Powerful single-phase motor. ■ Low noise, 64 dB (A). ■ Polyester filters. ■ Long hose (4 m plus 2.5 m extension hose). ■ Convenient drainage outlet. ■ Can be used as heavy duty dry /wet vacuum cleaner. ■

Use the QR-tag to check out more about DC 1400.

Technical specifications. Power Voltage Rated current, max Vacuum, max Suction inlet Container capacity (l) Weight

Applications.

Versatile dust collection unit for wet and dry applications. ■ Ideal for smaller jobs when a high level of portability is wanted. ■ Recommended with Husqvarna PG 400 and PG 280. Also with Husqvarna K 3000 Vac and DM 220. ■

1.4 kW 240 V 16 A 230 mbar Ø 35 mm 55 16 kg

More technical specifications on page 112.

Product specifications. DC 1400, 220 – 240 V, 1-phase

966 76 68 02

Supplied with hose (4 + 2.5 m), vacuum wand, polyester filter, floor tool, crevice tool, two Husqvarna multi adaptors, dust bag and wand elbow.

Spare parts. Unique Husqvarna multi adapter.

Flat filter polyester, safety class M.

110

Dust bag.

4 m hose, 40 mm diameter 2.5 m hose, 40 mm diameter 2 × 0.5 m vacuum wand, metal Floor tool Crevice tool Husqvarna multi adaptor Wand elbow

Standard paper filter.

579 53 39-01 579 53 53-01 579 53 61-01 579 53 55-01 579 53 60-01 579 53 51-01 579 53 52-01

HEPA filter.

Accessories. A B C D E F F

Floor nozzle metal.

Flat filter polyester, safety class M Dust bag Standard paper filter HEPA filter Floor nozzle metal Antistatic hose, 4 m Antistatic hose, 2.5 m

579 49 95-01 579 53 54-01 579 54 31-01 579 54 00-01 579 54 34-01 579 54 32-01 579 54 33-01

Antistatic hose.

111

Technical specifications for planetary grinders.

PG 820

PG 680

PG 530 (3-PHASE)

Power, kW

12.5

4.75

Voltage,V

380–480

Rated current, A

Power supply

3-phase

Grinding width, mm

820

680

530

Grinding disc, mm

3 × 270

3 × 240

Grinding pressure total, kg

335

300

149

Grinding pressure per disc, kg

112

100

Power per grinding disc, kW

4.15

1.58

Grinding disc speed, rpm

250 –1100

600 –1200

200 –710

Planetary head speed, rpm

5 – 65

5 – 70

Direction of rotation

Independent FWD / REV direction control on both grinding discs and planetary head

FWD / REV with grinding discs and planetary head rotation in same direction (not counter-rotation)

Recommended DC

DC 5500

Dimensions (L × W × H), mm

1370 × 820 × 1230

1150 × 680 × 1220

1100 × 530 × 1150

Weight, kg

440

385

216

Read more on page

100

102

104

Technical specifications for dust collectors.

DC 5500

DC 3300

DC 1400

Power, kW

5.5

3.3

1.4

Voltage,V

380–480

220 –240

Max rated current, A

16 *

Power supply

3-phase

1-phase

Airflow, m³/ h (cfm)

580 (350)

520 (325)

220

Max vacuum, mbar

300

230

Suction inlet diameter, mm

Primary filtration surface area, m²

2.25

Micro filter surface area, m²

– –

2 × 3.25

–

Container capacity, l Dimensions (L ×W × H), mm

1100 × 660 × 1960

900 × 650 × 1520

580 × 380 × 870

Weight, kg

215

Read more on page

108

109

110

* 32 A with PG 820 and PG 680.

112

–

PG 530 (1-PHASE)

PG 400

PG 280 (1-PHASE)

3.75

2.2

220–240

380–480

220–240

1-phase

3-phase

1-phase

530

400

280

3 × 240

410

290

134

1.25

2.2

200 –710

1400

50 FWD / REV with grinding discs and planetary head rotation in same direction (not counter-rotation)

1400

– –

DC 3300

1100 × 530 × 1150

1400 × 510 × 1050

1200 × 410 × 1000

200

115

104

106

107

PG 530 and DC 3300.

113

When it comes to surface preparation and tools that polish, grind concrete surfaces or remove previous treatments, weâ&#x20AC;&#x2122;re often talking about work that is both difficult, strenuous and time consuming. By listening to our customers we have been able to build a range of tools to fit every step of the surface preparation process. Whatever level of finish you are looking for, Husqvarna offers an array of tools developed for use with most materials. From the hardest concrete floor to the more porous, to meet demands for cutting speed and surface finish.

114

Husqvarna Hiperfloorâ&#x201E;˘ is a revolutionary flooring concept for the grinding and polishing of old and new concrete floors. Through market-leading research and development, Husqvarna has combined advancements in planetary floor grinders, floor treatment products and the latest resin diamond technologies to create a system whereby new and old concrete floors can be transformed into highly abrasion-resistant, incredibly dense, smooth and visually appealing surfaces.

DIAMOND TOOLS FOR SURFACE PREPARATION FLOOR TREATMENT PRODUCTS

Husqvarna’s Redi Lock™ is an instant and hasslefree system for changing diamond tooling, available for a variety of machine manufacturers.

The polishing pads of the P 1200 series allows the user to reach a certain gloss level in less steps than former series. Other benefits are higher working speed and increased durability.

Husqvarna Hiperfloor™ is a truly unique flooring solution which gives a spectacular, resistant surface with low maintenance costs for an infinite range of applications.

115

innovative diamond tools for optimum grinding and polishing. Husqvarnaâ&#x20AC;&#x2122;s range of diamond grinding and polishing tools is the result of innovative development and a commitment to providing the best possible options for the professional grinding contractor for every situation and application. From the removal of tough coatings to high-gloss premium polishing. Piranhaâ&#x201E;˘ PCD tools have been designed for even faster, more aggressive removal of coatings and screes. Metal bond tools are used in the initial grinding and polishing stages and in particular for surface preparation applications. The Husqvarna metal bond diamond

selection offers a wide choice of bonds and grit sizes, all with the choice of double or single segments to suit the application and budget of the end user. Husqvarna supplies cup wheels for surface preparation in all required grit sizes. Choose our premium-quality resin-bond polishing pads for high-end polishing, with a grit range from 50 to 3000. Husqvarna resin pads attach easily to the PG machinery range, by way of a simple Velcro system, and are also available for handheld machinery.

Product codification guide. for hard concrete

for medium concrete

for soft concrete

s1 g 1110 series

g 1120 series

g 1140 series

g 1150 series

g 1170 series

h2 g 1180 series

g 620 series

g 640 series

g 670 series

soft metal bond

medium metal bond

hard metal bond

Soft segments for hard materials

Hard segments for soft materials

standard grit sizes

116

120

200

(20/30)

(30/40)

(60/80)

(80/100)

(120/140)

(200/220)

Application guide – removal. MATERIAL

PCD

P O RO U S C E R A M I C G L U E S P L A S T I C- L I K E C E R A M I C G L U E S VINYL GLUES* PA I N T AND THIN EPOXY (<2 MM) THICK EPOXY (15–40 MM)

Read more on page l = Optimal l = Good l = Acceptable

1100 SERIES

600 SERIES

G 1110

G 1120

G 1140

G 1150

G 1170

G 1180

G 620

G 640

G 670

– –

–

l l

–

l l l l

l l l

l l

l l l l

l l l l l

–

l l l l

l l l

117

118

119

l l

– –

–

– = Not recommended

* The advised tooling for this application depends on the type of concrete under the material being removed. Husqvarna recommends starting with a harder bond (G 1170 or G 1150), and moving to a softer bond if productivity is not satisfactory.

Application guide – grinding. MATERIAL R A I N - DA M AG E D C O N C R E TE CO NC RE T E, SO FT CO NC RE T E, M E DI UM H A RD CO NC RE T E, H A RD SE M I-P O L I SHE D C O N C RE T E

Read more on page l = Optimal l = Good l = Acceptable

PCD

l l

1100 SERIES

600 SERIES

G 1110

G 1120

G 1140

G 1150

G 1170

G 1180

G 620

G 640

G 670

– – –

– –

l l l l

l l l

–

– –

l l l

l l

l l l

–

– –

118

119

– – –

l l

l l l

117

– –

– – –

l l l

118

119

– = Not recommended

The triple segments offers improved life and speed in very abrasive conditions such as asphalt grinding.

The G 1112 has a 16 mesh grit size to offer even more efficiency in removal application.

117

METAL-BOND DIAMOND TOOLS – REDI LOCk ™ Husqvarna offers a complete range of robust, metalbonded diamond tools for every application. Husqvarna’s Redi Lock™ is an instant and hassle-free system for changing diamond tooling. The need for multiple sets of diamond holder discs for different sets of diamond tooling is eliminated. The system is available for a variety of machine manufacturers. With six different types of products, the G 1100 series offers the best removal rate and the longest durability,

providing maximum profitability and performance with all types of applications. It also covers the surface preparation application in only three steps before using the resin tools in polishing applications. The G 600 range offers a good simple alternative. Perfect for smaller jobs and for users not specialised in surface preparation. This range offers a larger application window compared to the more high performance G 1100 series.

Redi Lock™ instant change system saves time. Switch the entire sets of diamonds instantly without any tooling. Its strong base plate is integrated making the locking system very robust and safe.

Steel construction diamond holder disc /carrier plate ensures maximum durability in tough preparation grinding applications.

Low-profile disc holder with recessed locking mechanism reduces overall height of tooling, increasing the efficiency of dust extraction.

The Husqvarna segments shape means more active diamonds than a basic rectangular shape for a more agressive grinding. The pre-sharpened segments enables the diamond tools to work with 100 % efficiency from the start with no need to dress the tool.

For bigger grit size parallel segments mean a higher removal rate.

Convex segments have a secant position to offer a smoother behavior for scratch removals.

118

Husqvarna G 11X1. FoR RemovaL oF HaRd-to-Remove coatinGs, adHesives and scReeds

Maximum wear and productivity is ensured with Husqvarna’s Piranha™ diamond scraper inserts. ■ For use on the PG machinery range in conjunction with the Redi Lock™ system. ■ Single or double quarter-round PCD with protective diamond strip. ■ Tools can be re-tipped once worn out. ■

PRODUCT NUMBER

NAME

DESCRIPTION

RECOMMENDED WITH

543 08 66-11

G 11X1 D

Double PCD plate

PG 820, PG 680, PG 530

Husqvarna Redi Lock™ G 1110. Single or double H or convex segment with a very soft bond for very hard concrete. ■ Can also be used for dry grinding of many natural stone (calcerous) and terrazzo floors. ■ Available in grit sizes 20, 30, 60 and 120. ■

PRODUCT NUMBER

NAME

COLOUR

SINGLE / DOUBLE

GRIT SIZE (MESH)

SHAPE

BOND HARDNESS

543 08 64-05 543 08 64-06 543 08 64-07 543 08 64-08 543 08 64-11 543 08 64-12 543 08 64-15 543 08 64-16

G 1113 S G 1113 D G 1114 S G 1114 D G 1115 S G 1115 D G 1116 S G 1116 D

Black Black Black Black Black Black Black Black

Single Double Single Double Single Double Single Double

20 20 30 30 60 60 120 120

H H H H Convex Convex Convex Convex

Soft 1 Soft 1 Soft 1 Soft 1 Soft 1 Soft 1 Soft 1 Soft 1

Husqvarna Redi Lock™ G 1120. Single or double H or convex segment with a soft bond for very hard concrete. ■ Available in grit sizes 20, 30, 60 and 120. ■

PRODUCT NUMBER

NAME

COLOUR

SINGLE / DOUBLE

GRIT SIZE (MESH)

SHAPE

BOND HARDNESS

543 08 64-23 543 08 64-24 543 08 64-25 543 08 64-26 543 08 64-29 543 08 64-30 543 08 64-34

G 1123 S G 1123 D G 1124 S G 1124 D G 1125 S G 1125 D G 1127 D

Yellow Yellow Yellow Yellow Yellow Yellow Yellow

Single Double Single Double Single Double Double

20 20 30 30 60 60 120

H H H H Convex Convex Convex

Soft 2 Soft 2 Soft 2 Soft 2 Soft 2 Soft 2 Soft 2

119

Husqvarna Redi Lock™ G 1140. Single or double H or convex segment with a medium bond for medium to hard concrete. ■ Available in grit sizes 20, 30, 60 and 120. ■

PRODUCT NUMBER

NAME

COLOUR

SINGLE / DOUBLE

GRIT SIZE (MESH)

SHAPE

BOND HARDNESS

543 08 64-41 543 08 64-42 543 08 64-43 543 08 64-44 543 08 64-47 543 08 64-48 543 08 64-52

G 1143 S G 1143 D G 1144 S G 1144 D G 1145 S G 1145 D G 1147 D

Pink Pink Pink Pink Pink Pink Pink

Single Double Single Double Single Double Double

20 20 30 30 60 60 120

H H H H Convex Convex Convex

Medium 1 Medium 1 Medium 1 Medium 1 Medium 1 Medium 1 Medium 1

Husqvarna Redi Lock™ G 1150. Single or double H or convex segment with a medium-hard bond for soft to medium concrete. ■ Available in grit sizes 20, 30, 60 and 120. ■

PRODUCT NUMBER

NAME

COLOUR

SINGLE / DOUBLE

GRIT SIZE (MESH)

SHAPE

BOND HARDNESS

543 08 64-59 543 08 64-60 543 08 64-61 543 08 64-62 543 08 64-65 543 08 64-66

G 1153 S G 1153 D G 1154 S G 1154 D G 1155 S G 1155 D

Grey Grey Grey Grey Grey Grey

Single Double Single Double Single Double

20 20 30 30 60 60

H H H H Convex Convex

Medium 2 Medium 2 Medium 2 Medium 2 Medium 2 Medium 2

Husqvarna Redi Lock™ G 1170. Single or double H or convex segment with a hard bond for soft concrete and abrasive surfaces (for example broom finished concrete and ceramic tile adhesive). ■ Available in grit sizes 20, 30 and 60. ■

PRODUCT NUMBER

NAME

COLOUR

SINGLE / DOUBLE

GRIT SIZE (MESH)

SHAPE

BOND HARDNESS

543 08 64-77 543 08 64-78 543 08 64-79 543 08 64-80

G 1173 S G 1173 D G 1174 S G 1174 D

Red Red Red Red

Single Double Single Double

20 20 30 30

H H H H

Hard 1 Hard 1 Hard 1 Hard 1

Husqvarna Redi Lock™ G 1180. Single, double or triple H segment with a very hard bond for very soft concrete and abrasive surfaces. ■ Available in grit sizes 20 and 30. ■ Triple segments offers improved life and speed in very abrasive conditions. ■

PRODUCT NUMBER

NAME

COLOUR

SINGLE / DOUBLE

GRIT SIZE (MESH)

SHAPE

BOND HARDNESS

543 08 64-95 543 08 64-96 574 43 00-01 543 08 64-97 543 08 64-98 574 43 01-01

G 1183 S G 1183 D G 1183 T G 1184 S G 1184 D G 1184 T

Blue Blue Blue Blue Blue Blue

Single Double Triple Single Double Triple

20 20 20 30 30 30

H H H H H H

Hard 2 Hard 2 Hard 2 Hard 2 Hard 2 Hard 2

120

Husqvarna Redi Lock™ G 620. Single or double, hexagonal or round segment with a soft bond for very hard concrete. ■ Available in grit sizes 20, 30, 50 and 100. ■

PRODUCT NUMBER

NAME

COLOUR

SINGLE / DOUBLE

GRIT SIZE (MESH)

SHAPE

BOND HARDNESS

543 08 93-76 543 08 93-80 543 08 93-77 543 08 93-81 543 08 93-78 543 08 93-82 543 08 93-79 543 08 93-83

G 623 S G 623 D G 624 S G 624 D G 625 S G 625 D G 627 S G 627 D

Green Green Green Green Green Green Green Green

Single Double Single Double Single Double Single Double

20 20 30 30 50 50 100 100

Hexagonal Hexagonal Hexagonal Hexagonal Round Round Round Round

Soft Soft Soft Soft Soft Soft Soft Soft

Husqvarna Redi Lock™ G 640. Single or double, hexagonal or round segment with a medium bond for medium to hard concrete. ■ Available in grit sizes 20, 30, 50 and 100. ■

PRODUCT NUMBER

NAME

COLOUR

SINGLE / DOUBLE

GRIT SIZE (MESH)

SHAPE

BOND HARDNESS

543 08 93-84 543 08 93-87 543 08 93-85 543 08 93-88 543 08 93-86 543 08 93-89

G 643 S G 643 D G 644 S G 644 D G 645 S G 645 D

White White White White White White

Single Double Single Double Single Double

20 20 30 30 50 50

Hexagonal Hexagonal Hexagonal Hexagonal Round Round

Medium Medium Medium Medium Medium Medium

Husqvarna Redi Lock™ G 670. Single or double, hexagonal segment with a hard bond for soft concrete and abrasive surfaces (for example broom finished concrete, ceramic tile adhesive). ■ Available in grit sizes 20 and 30. ■

PRODUCT NUMBER

NAME

COLOUR

SINGLE / DOUBLE

GRIT SIZE (MESH)

SHAPE

BOND HARDNESS

543 08 93-90 543 08 93-92 543 08 93-91 543 08 93-93

G 673 S G 673 D G 674 S G 674 D

Gold Gold Gold Gold

Single Double Single Double

20 20 30 30

Hexagonal Hexagonal Hexagonal Hexagonal

Hard Hard Hard Hard

CERAMIC DRY GRINDING AND POLISHING TOOLS

Husqvarna CP 1200 series. FOR INDUSTRIAL FINISHED CONCRETE FLOOR Ceramic tools with velcro backing for dry grinding and polishing of concrete. ■ Aggressive tool for grinding and honing of concrete, which will leave an excellent scratch pattern. ■ Long life offers excellent value for money. ■

PRODUCT NUMBER

NAME

COLOUR

DIAMETER, MM

GRIT SIZE (MESH)

DIAMOND HEIGHT, MM

577 31 70-04 577 31 70-01 577 31 70-02 577 31 70-05

CP1241 CP1242 CP1243 CP1244

Purple Dark Green Black Red

75 75 75 75

30 50 100 200

6.5 6.5 6.5 6.5

121

CUP WHEELS FOR SURFACE PREPARATION Grinding tools for handheld applications, dedicated to floor specialists and construction professionals. The product range offers the highest performance in all floor preparation applications. The cups are provided with 22.2 bore hole and an M 14 adapter in order to provide more options for the user. The anti-vibration connector decreases the vibration for the user and makes the job less tiring. The effect can be cancelled by using the M 14 adapter.

When using bigger grit sizes, the anti-vibration connector decreases the risk of digging in the material. When using fine grit sizes, the anti-vibration connector makes the finish of the material smoother and softer.

122

M 14 adapter is supplied with all cup wheels of the G 1000 series. It gives more options to the user regarding the attachment and can also cancel the antivibration effect if required.

Husqvarna G 1043 / G 1013. FOR CONCRETE REPAIRS, FLOOR FLATTENING AND AGGREGATE EXPOSURE

Specific support for natural and improved dust extraction. ■ Exclusive Husqvarna segment shape for more active diamonds. ■ Optimal removal rate. ■ The anti-vibration connector reduces strain on user and boosts flatness. ■

PRODUCT NUMBER

NAME

APPLICATION

CONNECTOR

DIAMETER, MM

GRIT SIZE (MESH)

543 09 34-68 543 09 34-69 525 35 53 03

G 1013 G 1043 G 1043

Hard to very hard concrete Normal concrete Normal concrete

22.2 / M 14 22.2 / M 14 22.2 / M 14

125 125 180

20 / 30 20 / 30 20 / 30

Husqvarna G 1045. FOR EPOXY AND SEALER LAYING PREPARATION

Smoothening step in concrete polishing applications. ■ Specifically designed convex segments for smoother but active grinding. ■ Optimal removal rate. ■ The anti-vibration connector reduces vibration and improves surface contact. ■

PRODUCT NUMBER

NAME

APPLICATION

CONNECTOR

DIAMETER, MM

GRIT SIZE (MESH)

525 35 53 04 543 09 34-74

G 1045 G 1045

Normal to soft and abrasive concrete Normal to soft and abrasive concrete

22.2 / M 14 22.2 / M 14

180 125

40 / 50 40 / 50

Husqvarna G 1017. FOR SCRATCH REMOvAL AND POLISHING PREPARATION

Smoothening step in concrete polishing applications. ■ Rounded segments for smooth operation and complete avoidance of surface scratching. ■ The anti-vibration connector reduces vibration and improves surface contact. ■ Three different diameters to cover all handheld applications. ■

PRODUCT NUMBER

NAME

CONNECTOR

DIAMETER, MM

GRIT SIZE (MESH)

543 09 34-75 525 35 53 05

G 1017 G 1017

22.2 / M 14 22.2 / M 14

125 180

100 / 120 100 / 120

123

PREMIUM POLISHING TOOLS Premium quality polishing pad delivering exceptional gloss and clarity when used for dry polishing of concrete, terrazzo and some natural stones. Highly recommended for use in conjunction with Hiperhard™ floor densifier / hardener in the Hiperfloor™ concrete polishing system. The 1200 series is developed to reach a maximum gloss in less steps, which saves time and tooling and gives a better end result.

Husqvarna P 1200 series. MORE LIFE, MORE SPEED AND HIGHER GLOSS

Resin bond polishing diamonds. Allows the user to reach a certain gloss level in few steps, which saves time and tooling and brings a lower cost as well as a better end result. ■ 6.5 mm diamond height and a lower wear-out rate offer a long durability. ■ More aggressive allowing higher working speed which results in a lower cost /m². ■ Specific design allowing work in both rotation directions. ■ ■

Gloss levels. Gloss value

P 1200 resins allow the user to achive a given result in less steps compared to other resins. They also present a better end result. Gloss value

Gloss value

P 1200

P 600

Less steps to achieve a given result.

Steps

Usual resin

Higher maximum gloss.

7 Steps

For handheld machines.

For PG machines.

124

Husqvarna P 1200 range. PRODUCT NUMBER

NAME

COLOUR

DIAMETER, MM

GRIT SIZE (MESH)

DIAMOND HEIGHT, MM

P 1242 P 1243 P 1244 P 1245 P 1246 P 1247 P 1248

Dark green Black Red Yellow White Blue Grey

75 75 75 75 75 75 75

50 100 200 400 800 1500 3000

6.5 6.5 6.5 6.5 6.5 6.5 6.5

Dark green Black Red Yellow White Blue Grey

125 125 125 125 125 125 125

50 100 200 400 800 1500 3000

2.8 2.8 2.8 2.8 2.8 2.8 2.8

FOR PG MACHINES

574 42 82-01 574 42 83-01 574 42 84-01 574 42 85-01 574 42 86-01 574 42 87-01 574 42 88-01

FOR HANDHELD MACHINES

574 42 89-01 574 42 90-01 574 42 91-01 574 42 92-01 574 42 93-01 574 42 96-01 574 42 97-01

P 1242 P 1243 P 1244 P 1245 P 1246 P 1247 P 1248

Husqvarna P 1100 series. WET POLISHING RANGE

Resin bond polishing diamonds for PG machines. ■ Consistent progression in gloss levels throughout all successive steps. ■ Dedicated to wet polishing of concrete and terazzo. Can also be used for stain removals. ■

PRODUCT NUMBER

NAME

COLOUR

DIMENSION, MM

GRIT SIZE (MESH)

DIAMOND HEIGHT, MM

543 08 74-39 543 08 65-73 543 08 65-74 543 08 65-75 543 08 65-76

P 1182 P 1183 P 1184 P 1185 P 1186

Dark blue Yellow Orange Red Dark green

76 76 76 76 76

60 100 200 400 800

10 10 10 10 10

125

Floor TreaTMenT ProduCTS Husqvarna offers a range of floor treatment products for use in the Hiperfloor™ process to help you achieve a first-class mechanical and aesthetic finish.

Husqvarna GM 3000™. GM 3000™ is specifically formulated for re-grouting and hole filling in concrete surfaces. It’s an inherent part of the Hiperfloor™ process. GM 3000™ is effective for patching and filling small air pockets /pin holes when polishing concrete floors. Product specifications. GM 3000™, 20 l Soft broom for application, 600 mm

543 08 71 61 543 08 71 74

Holes filled when grinding with 120 grit metal-bonded diamonds and GM 3000™.

Husqvarna TM Green Seal. Green Seal is primarily a water based, high level stain protecting, penetrating, natural look sealer. It sits below surface without affecting slip resistance. It provides maximum stain resistance against oils and airborne pollutants; and can be applied to a wide range of surfaces. TM

Product specifications. Green Seal™, 20 l Microfibre mop, 600 mm Replacement mop, 600 mm

543 08 71 70 543 09 23-44 543 09 31-46

Husqvarna Polished Concrete Cleaner. Husqvarna Polished Concrete Cleaner is a premium quality bio-degradeable floor cleaner which does not require rinsing. The product is safe to use on all surfaces and may be mopped onto the floor or used through an automatic scrubbing machine. Husqvarna Polished Concrete Cleaner dries film free with a light fresh pine fragrance, leaving floors looking bright and clean. Product specifications. Polished Concrete Cleaner, 5 l Microfibre mop, 600 mm Replacement mop, 600 mm

126

543 08 71 69 543 09 23-44 543 09 31-46

Husqvarna Hiperhard™. Hiperhard™ is an additional treatment product in the Hiperfloor™ process. It is a silicate applied to the concrete surface, to react with the calcium hydroxide that already exists in the concrete. A crystalline /glassy structure is formed in the pores of the concrete near the surface, and this is a main contributor to increasing the surface hardness of the concrete. The formation of calcium silicate in the concrete, combined with polishing the concrete with resin-bonded diamonds, significantly hardens the floor and improves the abrasion resistance as well having a significant impact on the appearance of the final floor. Product specifications. Hiperhard™, 20 l Soft broom for application

543 08 71 65 543 08 71 74

Husqvarna Hiperguard™ Premium Enhance. Hiperguard™ Premium Enhance (PE) is a premiumgrade surface impregnator which is used in the final step of the Hiperfloor™ process. Hiperguard™ PE penetrates the concrete to form a film along the surface of the capillaries. This increases the surface tension of the floor, restricting the absorption of water, oil, fats and dirt. Stains are kept at the surface level, which simplifies maintenance and cleaning and extends the lifespan of the floor. Hiperguard™ PE also helps enhance the colour of the material being sealed. Product specifications. Hiperguard™ PE, 10 l Microfibre mop, 600 mm Replacement mop, 600 mm

543 08 74 48 543 09 23-44 543 09 31-46

Husqvarna burnishing pads. Recommended for use in conjunction with Hiperguard™ Premium Enhance. Use the velcro adapter to maintain the burnishing pad more firmly under the machine. Product specifications. Burnishing pad for PG 530 and PG 680, Ø 240 mm Burnishing pad for PG 820, Ø 270 mm Velcro for burnishing pads, 240 mm Velcro for burnishing pads, 270 mm

543 08 73 44 543 08 73 49 574 51 36-01 574 51 36-02

127

Husqvarna Hiperfloor™. Hiperfloor™ is a method for mechanically grinding, treating and polishing concrete floors. Concrete is evolving as an artistic medium which provides unparalleled advantages in design flexibility, longevity, strength, low maintenance, hygiene and cost effective flooring. It is also a fundamental building element in most projects. Combined with concrete, Hiperfloor™ creates opportunities for an infinite range of application possibilities.

128

Benefits.

Applications.

Truly unique environmentally sensible flooring solution. ■ Spectacular surface finish. ■ Hard wearing surface suitable for commercial, industrial and domestic environments. ■ Low maintenance. ■ Predictable concrete floor finishes. ■ Can be installed to conform to a variety of slip resistance classifications.

With spectacular design and performance properties, Hiperfloor™ can be used in a broad range of both new and old construction. Warehouses, manufacturing plants, automotive factories, showrooms and other retail, commercial and domestic environments can all be radically transformed.

■

Hard and resistant. Hiperfloor™ increase hardness and abrasion resistance to a level where the surface is extremely resistant to wear; hence a very effective solution for high traffic and industrial flooring areas. This means that the requirement for surface coatings in many applications is eliminated, thus avoiding the very real possibility of flaking, peeling or delamination often associated with such topical products. Hiperfloor™ installation is also dust free, free of toxic odours and once complete instantly trafficable.

Environmentally sensible solution. Hiperfloor™ is a smart solution to reduce environmental impact from a number of different aspects. ■ Reduces material wastage and future surface replacements /refurbishments. ■ Reduces lighting energy requirements. ■ Incorporates products whith low environmental impact. ■ No need for reapplications of topical coatings to maintain a desired finish or to prevent concrete from wear.

Hiperfloor™ is a good investment for your work, your economy and our environment. GLOSS LEvEL CHOICES

5 YEAR MAINTENANCE COST

More glossy

Cost

Less glossy Prem spec

High spec

Med spec

Hiperfloor™

Low spec

SLIP COEFFICIENT

Vinyl

Carpet

Resin

15 YEAR LIFE CYCLE COST (INCL. PURCHASE) Cost

Less slippery

More slippery Dry

Wet

Hiperfloor™

Dry

Wet Vinyl

Dry

Wet Resin

Hiperfloor™

Vinyl

Carpet

Resin

129

The Hiperfloor™ method: GRIND – FILL – HARDEN – POLISH – PROTECT The concrete floor is first ground to establish the required flatness and /or aggregate exposure. This also removes what is in many cases the softer, unstable surface layer of concrete. ■ Small holes, air-bubbles and other small surface imperfections are then filled using Husqvarna’s GM 3000™ to ensure a smooth uniform surface. ■ The surface of the concrete is then treated with Husqvarna’s Hiperhard™ water based concrete hardener. This produces a homogenously hardened surface and creates a non-dusting floor. ■ Polishing via progressively finer stages of resin bond diamond tools to achieve desired surface gloss. ■ Protection by impregnation using Hiperguard™ to enhance water and stain resistance of floor. ■

Alternative flooring comparison chart. BENEFITS

HIPERFLOOR™ DECORATIVE

HIPERFLOOR™ INDUSTRIAL

STONE, HARD

l l l l l

STAIN RESISTANCE

MEDIUM / HIGH

MEDIUM

MEDIUM / HIGH

HEAT RESISTANCE

l l l l l l l l l l l

MEDIUM / HIGH

MEDIUM

HIGH

HIGH GLOSS LEVEL HIGH ABRASION RESISTANCE HIGH WEAR RESISTANCE NON DUSTING NON MARKING

L OW- C O S T M A I N T E N A N C E E ASY M A I NT EN A N C E SE AM L E SS E NVIRO N ME N TA L LY SENSIBLE O D O U R L E SS INSTA LL ATION HIGH DURABI LITY MINIMA L DOWNTIME ON INSTALLATION INCREA SES SURFACE F L AT N E S S LOW L I F E CYCLE COST LONG TERM LIGHT REFLECTIVITY INITIAL INSTALLATION COST BROAD C O L O U R O P T I O N S SO U ND DA M P E N I N G HIGH INSULATION R E P L AC E M E N T C O S T R EFU RB ISH A BL E L OW A L L ER G E N I C

130

– – –

–

l l l

– – –

l l

– –

L OW

LOW

HIG H

l l

Before.

During.

STONE, SOFT

TILES

CARPET

–

– – – – –

MEDIUM / HIGH

HIGH

LOW

l l l

–

l l l

– – –

–

VINYL

l l l

After.

– –

THIN FILM COATINGS

– –

l l

– –

– – –

HIGH

l l

LOW

MEDIUM

–

– –

– – – –

–

– – – – – – – – –

HIGH

MEDIUM / HIGH

MEDIUM

H I GH

M E DI U M

–

– – –

MEDIUM / HIGH

MEDIUM

l l

– – – –

– –

–

l l l

– –

HIGH

l l

–

l l

– – –

–

– –

EPOXY

–

– – – – – – –

– –

–

– – –

– – – – – – –

– –

MEDIUM / HIGH

– –

131

132

DRILLING

Application overview

134

Benefit overview

136

Range overview

138

Husqvarna automatic drill system

142

Husqvarna drill motors

144

Husqvarna drill stands

154

Husqvarna drill motors with stand

158

Technical specifications for drill motors

162

Technical specifications for drill stands

164

Technical specifications for drill motors with stand

165

Diamond tools for drilling

166

Efficient drilling equipment is just as much about manoeuvrability and ergonomics as it is about capacity and adaptability to different drilling jobs. Whether drilling by hand or using a stand, both the drill motor and the other equipment must be light, efficient and easy to use. Not until you can work without unnecessary effort and without wasting time, before as well as during the job, can you really talk about efficiency.

133

Drilling â&#x20AC;&#x201C; application overview.

Vertical drilling, upwards and downwards.

Horizontal drilling.

Stitch drilling.

Angle drilling.

Automatic drilling in all applications.

Dry drilling handheld.

134

Drilling for channels, pipes and cables.

Drilling for water evacuation.

Drilling for barriers.

Vertical drilling.

135

Smart solutions that simplify even the toughest drilling. LED and pulse technology helps the user to drill with optimal power and warns of an approaching overload.

The DM 220 has an integrated dust control feature which uses the same connection for both wet and dry drilling adapters.

The DM 220 has a quick connection for a sturdy and fast fitting to the drillstand. A plastic cover protects the connection when not in use.

The DM 220 is equipped with an electronic positioning system that shows when the machine is in preferred vertical or horizontal position. This provides more efficient drilling.

136

With one single control, the operator can easily adjust the speed, direction and power of the AD 10.

The AD 10 is a unique automatic drill system that optimises the operation on the basis of which drill motor itâ&#x20AC;&#x2122;s working with. This gives a highly efficient and precise operation.

Sensing when the drill has gone through the material, the AD 10 automatically stops the drilling.

Use the QR-tag to check out more about AD 10.

The AD 10 is very easy to use. With one single control, you adjust speed, direction and power.

137

Automatic drill system – range overview. APPLICATIONS ■ ■

For core drilling of small to large diameter holes. Perfect for stitch drilling as well as deep drilling.

PRODUCT

TECHNICAL SPECIFICATIONS

Husqvarna AD 10.

Weight 3.6 kg Speed 0 – 3.2 m /min in both directions

PAGE

142

Drill motors – range overview. APPLICATIONS ■

■

138

PRODUCT

TECHNICAL SPECIFICATIONS

PAGE

For heavy duty core drilling up to Ø 400 mm together with Husqvarna drill stands. For a variety of materials, including reinforced concrete, brick and other building materials. Heavy-duty applications like water evacuation, ventilation and plumbing channels, waste evacuation pipes, gas supply pipes, barriers, road signs and holes in corners for wall sawing openings. For angle drilling, stitch drilling and drilling in all directions, with Husqvarna drill stands.

Husqvarna DM 340.

Power 3300 W 1-phase rated voltage 230 V Spindle speed full load 240 / 540 / 930 rpm Spindle thread 1 1 / 4" 7 UNC Drill diameter, max 400 mm Weight 14.0 kg

144

For medium core drilling up to Ø 350 mm together with Husqvarna drill stands. For a variety of materials, including reinforced concrete, brick and other building materials. Medium applications like water evacuation, ventilation and plumbing channels, waste evacuation pipes, gas supply pipes, barriers, road signs and holes in corners for wall sawing openings. For angle drilling, stitch drilling and drilling in all directions, with Husqvarna drill stands.

Husqvarna DM 280.

Power 2700 W 1-phase rated voltage 230 / 110 V Spindle speed full load high speed 350 / 780 /1340 rpm Spindle speed full load low speed 240 / 540 / 930 rpm Spindle thread 1 1 / 4" 7 UNC Drill diameter, max 250 / 350 mm Weight 13.0 kg

146

APPLICATIONS ■

■

■ ■

■

■ ■

■

PRODUCT

TECHNICAL SPECIFICATIONS

PAGE

For heavy core drilling up to Ø 650 mm. with Husqvarna larder drill stands and any Husqvarna hydraulic power pack. For a variety of materials, including reinforced concrete, brick and other building materials. Suitable for waste evacuation pipes, stitch drilling, large openings and deep holes for channels and pipes.

Husqvarna DM 406 H.

Power at 40 1/min 9300 W Gear 6 Geometric displacemnt 22/15 cm3 Spindle speed 120/230/340/ 580/980/1400 rpm Spindle thread 1 1/4" 7 UNC/CR 128 Drill diameter, max 650 mm Drill diameter, min 50 mm Weight 16.0 kg

148

Handheld core drilling up to Ø 80 mm. Can be mounted on Husqvarna drill stands for angle drilling and holes up to 150 mm. For a variety of materials, including reinforced concrete, brick and other building materials. Suitable for ventilation, plumbing pipes, joints, electrical sockets and telecom cables.

Husqvarna DM 230.

Power 1850 W 1-phase rated voltage 230 / 110 V Spindle speed full load 580 / 1400 / 2900 rpm Spindle thread 1 1 / 4" UNC and G 1 / 2" Drill diameter, with stand / handheld, max 150 / 80 mm Weight 7.0 kg

150

Handheld core drilling up to Ø 80 mm. Can be mounted on a Husqvarna drill stand for angle drilling and holes up to 150 mm. For a variety of materials, including reinforced concrete, brick and other building materials. Suitable for ventilation, plumbing pipes, joints, electrical sockets and telecom cables. Can be used for both dry and wet drilling.

Husqvarna DM 220.

152

139

Drill stands – range overview. APPLICATIONS ■ ■

■

■ ■

■

140

PRODUCT

TECHNICAL SPECIFICATIONS

PAGE

For heavy core drilling in walls, floors and roofs, up to Ø 450 mm. For a variety of materials, including reinforced concrete, brick and other building materials. For larger holes such as channels for ventilation, plumbing and stitch drilling with larger holes.

Husqvarna DS 450.

Drill diameter, max Travel length Weight

450 mm 70 mm 24.0 kg

157

For core drilling in walls, floors and roofs, up to Ø 250 mm. For a variety of materials, including reinforced concrete, brick and other building materials. For drilling holes such as channels for ventilation, plumbing and joints. Suitable for stitch and angle drilling.

Husqvarna DS 250.

Drill diameter, max Travel length Weight

250 mm 685 mm 16.0 kg

154

Lighter core drilling up to Ø 150 mm in walls, floors and ceilings. For a variety of materials, including reinforced concrete, brick and other building materials. Smaller jobs requiring fast setup, such as smaller channels and pipes.

Husqvarna DS 150.

Drill diameter, max Travel length Weight

150 mm 495 mm 15.5 kg

155

APPLICATIONS ■

■ ■

■

For heavy core drilling up to Ø 650 mm. Has a travel length of 680 mm. Applications where good stability and fixing is needed. For a variety of materials, including reinforced concrete, brick and other building materials. Large holes for channels and stitch drilling.

PRODUCT

TECHNICAL SPECIFICATIONS

Husqvarna DS 70 ATS.

Drill diameter, max Travel length Weight

650 mm 680 mm 37 kg

PAGE

156

Drill motors with stand – range overview. APPLICATIONS ■ ■

■

■ ■

PRODUCT

TECHNICAL SPECIFICATIONS

PAGE

For medium core drilling in walls, floors and roofs, up to Ø 250 mm. For a variety of materials, including reinforced concrete, brick and other building materials. Suitable for drilling ventilation and plumbing channels, waste evacuation pipes, barriers and road signs. For angle and stitch drilling.

Husqvarna DMS 240.

Power 1-phase rated voltage Spindle speed full load Drill diameter, max Weight

2400 W 230 / 110 V 185 / 455 rpm 250 mm 25.0 kg

158

Core drilling in walls, floors and roofs, up to Ø 120 mm. For a variety of materials, including reinforced concrete, brick and other building materials. Stitch drilling and drilling close to walls /edges. Suitable for lighter applications such as small channels and pipes, electrical sockets and telecom cables, anchoring and gas supply pipes.

Husqvarna DMS 1600 AT.

Power 1-phase rated voltage Spindle speed full load Drill diameter, max Weight

1550 W 230 / 110 V 1100 rpm 120 mm 12.0 kg

160

141

Husqvarna AD 10. Applications. ■ ■

For core drilling of small to large diameter holes. Perfect for stitch drilling as well as deep drilling.

Benefits.

No manual work is needed. The operator can stand comfortably upright, without having to keep turning. ■ The AD 10 is the fastest of its kind on the market, both when it comes to drill and bring the drill and core out of the material. ■ A new built-in technology optimises operation on the basis of which Husqvarna model the AD 10 is working with. This ensures high efficiency and precision. ■ The unit is simple to mount and manoeuvre. In a few seconds, it snaps firmly in place at any angle on the drill stand. ■ With the aid of one control, the operator controls the speed, direction and power of the AD 10 and the drill stand it is mounted on. ■ AD 10 senses when the drill head has gone through the material and then automatically stops both the power supply and the drilling. ■ It has a compact design and weighs only 3.6 kg. ■ AD 10 fits the Husqvarna drill motors DM 280, DM 340 and the Husqvarna drill stands DS 450, DS 70 Gyro, DS 50 Gyro. ■

The AD 10 makes the drilling work faster and easier, enabling the operator to produce more on shorter time with less strain. This unique, automatic drill system optimises the feed rate to the drill motor being used, providing a highly efficient and precise operation. With one single control, the operator easily adjusts speed, direction and power.

Technical specifications. Weight Speed

3.6 kg 0 – 3.2 m /min in both directions

Product specifications. AD 10

With a quick connection plate, the AD 10 is easily mounted to the DS 450 drill stand.

142

966 66 66 04

The AD 10 can be mounted on both sides of the DS 450 drill stand.

Use the QR-tag to check out more about AD 10.

Available drill motors- and stands. DRILL mOTORS

DRILL STANDS

Dm 280

Dm 340

DS 450

350

450

Travel, max mm

–

400

Weight, incl. carriage, kg

13.0

14.0

25 / 30

Read more on page

146

144

157

Drill diameter, max mm

–

700 / 1635

143

Husqvarna DM 340.

Watercooled 3 speed gearbox for optimal drilling performance.

Top with load indicator (LED) for optimal load.

Applications.

SoftStart™ – electronic current limiter means full speed is reached about two seconds after start. ■ The machine has a designed handle for easier transport and faster set-up. ■ The controls are designed and positioned to enhance ergonomics and facilitate operation. ■ The water hose can turn 180, for greater flexibility in terms of setup configuration. ■

For heavy duty core drilling up to Ø 400 mm together with Husqvarna drill stands. ■ For a variety of materials, including reinforced concrete, brick and other building materials. ■ Heavy-duty applications like water evacuation, ventilation and plumbing channels, waste evacuation pipes, gas supply pipes, barriers, road signs and holes in corners for wall sawing openings. ■ For angle drilling, stitch drilling and drilling in all directions, with Husqvarna drill stands. ■

Benefits.

Equipped with Elgard™ which indicates via the LED when the machine is overloaded. This allows the operator to always drill at maximum pressure and prevents engine damage and extends product life. ■ When making a starter hole speed can be reduced by half using SmartStart. ■

Technical specifications. Power 1-phase rated voltage Spindle speed full load Spindle thread Drill diameter, max Weight

3300 W 230 V 240 / 540 / 930 rpm 1 1 / 4" 7 UNC 400 mm 14.0 kg

More technical specifications on page 162.

Product specifications. DM 340, 230 V

965 98 72 02

Diamond drill bits. MATERIAL

D 1200 DIAgRIp™ sERIEs

NATURAL sTONE, gRANITE / sANDsTONE C O N C R E TE , H A R D C O N C R E TE , M E D I U M C O N C R E TE , s O FT C O N C R E TE , A B R A s I V E BRICK CEME NT BLOCKs

Read more on page

144

C 400 sERIEs

D 1220

D 1235

C 620

C 420

l l l l

l l

170

171

172

174

–

A s p H A LT

l = Optimal l = Good l = Acceptable

C 600 sERIEs

D 1210

– = Not recommended

–

A large selection of slurry collectors.

V-shaped slurry collectors.

Washer quick release, to release the drill motor thread from the drill bit.

U-shaped slurry collectors.

Pressurised water tank holds 15 litres and comes with a 3-meter hose.

Anchoring kit, incl large nut, holding screw, pointer and 5 anchors. H

WT 15 – battery-powered water tank.

Large selection of adapters to suit various threads.

The AD 10 is a unique automatic drill system. It optimises the power based on which drill it’s working with, providing high efficiency and precision – and less strain for the operator. The speed is up to 3.2 m / min in both directions, which makes the AD 10 the fastest product of its kind on the market. Read more about the AD 10 on page 142.

Extensions, for deep drilling with standard drill bits.

Accessories. A A A A A A B B C D

Slurry collector, 160 mm Slurry collector, 180 mm Slurry collector, 210 mm Slurry collector, 220 mm Slurry collector, 260 mm Slurry collector, 310 mm Slurry collector V-shaped, 350 mm Slurry collector V-shaped, 700 mm Slurry collector U-shaped, 212 mm Anchoring kit

531 28 00 02 531 28 02 96 531 28 00 03 531 07 46 82 531 28 00 04 531 28 00 05 531 07 46 22 531 28 00 07 531 28 03 29 502 43 48 01

D E F G H I I I I J

Anchors Washer quick release Pressurised water tank Water pump,WT 15, 230 V Adapter drill bit *, 1 1 / 4" F – 1 / 2" G F Extension drill bit *, 200 mm, 1 1 / 4" F – 1 1 / 4" M, steel Extension drill bit *, 300 mm, 1 1 / 4" F – 1 1 / 4" M, steel Extension drill bit *, 500 mm, 1 1 / 4" F – 1 1 / 4" M, steel Extension drill bit *, 1000 mm, 1 1 / 4" F – 1 1 / 4" M, steel AD 10

502 43 54 01 543 03 91 82 506 32 63 02 966 70 83 03 543 04 64 26 543 04 65 01 543 04 65 02 543 04 65 04 543 04 65 05 966 66 66 04

* See page 175 for more drill bit accessories.

Available drill stands. RECOMMENDED DS 450

DS 70 ATS

Drill diameter, max mm

450

650

Travel, max mm

700

680

Weight, incl. carriage, kg

24.0

Read more on page

157

156

145

Husqvarna DM 280.

Watercooled 3 speed gearbox for optimal drilling performance.

Use the QR-tag to check out more about DM 280.

Applications.

The machine has a designed handle for easier transport and faster set-up. ■ The controls are designed and positioned to enhance ergonomics and facilitate operation. ■ The water hose can turn 180°, for greater flexibility in terms of setup configuration. ■

For medium core drilling up to Ø 350 mm together with Husqvarna drill stands. ■ For a variety of materials, including reinforced concrete, brick and other building materials. ■ Medium applications like water evacuation, ventilation and plumbing channels, waste evacuation pipes, gas supply pipes, barriers, road signs and holes in corners for wall sawing openings. ■ For angle drilling, stitch drilling and drilling in all directions, with Husqvarna drill stands. ■

Benefits.

Technical specifications. Power 1-phase rated voltage Spindle speed full load, low speed version Spindle thread Drill diameter, max Weight

2700 W 230 V 240 / 540 / 930 rpm 1 1 / 4" 7 UNC 250 / 350 mm 13.0 kg

More technical specifications on page 162.

Product specifications. LOW SPEED VERSION

DM 280, 230 V, low speed

966 55 41 02

Diamond drill bits. mATERIAL

D 1200 DIAGRIP™ SERIES

NATURAL STONE, GRANITE / SANDSTONE C O N C R E TE , H A R D C O N C R E TE , m E D I U m C O N C R E TE , S O F T C O N C R E TE , A B R A S I V E BRICK CEmE NT BLOCKS

Read more on page

146

C 400 SERIES

D 1220

D 1235

C 620

D 420

l l l l

l l

170

171

172

174

–

A S P H A LT

l = Optimal l = Good l = Acceptable

C 600 SERIES

D 1210

– = Not recommended

–

A large selection of slurry collectors.

V-shaped slurry collectors.

Washer quick release, to release the drill motor thread from the drill bit.

U-shaped slurry collectors.

Pressurised water tank holds 15 litres and comes with a 3-meter hose.

Anchoring kit, incl large nut, holding screw, pointer and 5 anchors. h

WT 15 – battery-powered water tank.

Large selection of adapters to suit various threads.

Extensions, for deep drilling with standard drill bits.

Accessories. A A A A A A B B C d

531 28 00 02 531 28 02 96 531 28 00 03 531 07 46 82 531 28 00 04 531 28 00 05 531 07 46 22 531 28 00 07 531 28 03 29 502 43 48 01

d e f g h i i i i j

502 43 54 01 543 03 91 82 506 32 63 02 966 70 83 03 543 04 64 26 543 04 65 01 543 04 65 02 543 04 65 04 543 04 65 05 966 66 66 04

* See page 175 for more drill bit accessories.

Available drill stands. ReCOMMeNded

Drill diameter, max mm

dS 450

dS 70 ATS

dS 250

450

650

250

Travel, max mm

700

680

685

Weight, incl. carriage, kg

24.0

16.0

Read more on page

157

156

154

147

Husqvarna DM 406 H.

Hydraulic speed control.

Gearbox leveller.

Applications.

Technical specifications.

For heavy core drilling up to Ø 650 mm with Husqvarna larger drill stands and any Husqvarna hydraulic power pack. ■ For a variety of materials, including reinforced concrete, brick and other building materials. ■ Suitable for waste evacuation pipes, stitch drilling, large openings and deep holes for channels and pipes.

Power at 40 l / min Gear Geometric displacement Spindle speed Spindle thread Drill diameter, max Drill diameter, min Weight

■

9300 W 6 22 / 15 cm³ 120 / 230 / 340 / 580 / 980 / 1400 rpm 1 1 / 4" 7 UNC / CR 128 650 mm 50 mm 16.0 kg

More technical specifications on page 163.

Benefits.

Six-speed gearbox, providing a wide rpm range for all types of applications, material and holes up to Ø 650 mm. ■ The hydraulic gearbox is easy to manoeuvre and enables the operator to change speed during operation. ■ The operator can adjust the speed when starting to drill a hole, which gives a smoother start and straighter holes. ■

Product specifications. DM 406 H, 1 1 /4" 7 UNC spindle

965 15 82 07

Diamond drill bits. mATERIAL

D 1200 DIAGRIP™ SERIES

NATURAL STONE, GRANITE / SANDSTONE C O N C R E TE , H A R D C O N C R E TE , m E D I U m C O N C R E TE , S O F T C O N C R E TE , A B R A S I V E BRICK CEmE NT BLOCKS

Read more on page

148

D 1220

D 1235

l l l l

l l

188

–

A S P H A LT

l = Optimal l = Good l = Acceptable

D 1210

– = Not recommended

–

A large selection of slurry collectors.

V-shaped slurry collectors.

Drill motor keys.

U-shaped slurry collectors.

Washer quick release, to release the drill motor thread from the drill bit.

Large selection of adapters to suit various threads.

Extensions, for deep drilling with standard drill bits.

Accessories. A A A A A A A A A B B C

Slurry collector, 160 mm Slurry collector, 180 mm Slurry collector, 210 mm Slurry collector, 220 mm Slurry collector, 260 mm Slurry collector, 310 mm Slurry collector, 360 mm Slurry collector, 410 mm Slurry collector, 430 mm Slurry collector V-shaped, 700 mm Slurry collector V-shaped, 350 mm Slurry collector U-shaped, 212 mm

531 28 00-02 531 28 02-96 531 28 00-03 531 07 46-82 531 28 00-04 531 28 00-05 531 28 00-06 531 28 03-22 531 07 46-78 531 28 00-07 531 07 46-22 531 28 03-29

D E F G G G G

Washer quick release Drill motor keys, 32 mm Adapter drill bit *, 1 1 / 4" F – 1 / 2" G F Extension drill bit *, 200 mm, 1 1 / 4" F – 1 1 / 4" M, steel Extension drill bit *, 300 mm, 1 1 / 4" F – 1 1 / 4" M, steel Extension drill bit *, 500 mm, 1 1 / 4" F – 1 1 / 4" M, steel Extension drill bit *, 1000 mm, 1 1 / 4" F – 1 1 / 4" M, steel

543 03 91-82 531 11 90-32 543 04 64-26 543 04 65 01 543 04 65-02 543 04 65-04 543 04 65-05

* See page 175 for more drill bit accessories.

Available power packs. TECHNICAL SPECIFICATIONS

PP 325 E

Pressure, bar

140

Flow, l / min

Power output, kW

9.3

Weight, kg

Read more on page

*As rated by the engine manufacturer.

Husqvarna PP 325 E

Available drill stands. RECOmmENDED

Drill diameter, max mm Travel, max mm Length, telescopic stanchion, m

DS 70 ATS

DS 450

650

450

680

–

700

–

Weight, incl. carriage, kg

Read more on page

156

157

149

Husqvarna DM 230.

Watercooled 3 speed gearbox for optimal drilling performance and longer service intervals.

The ergonomic designed handle with pistol grip gives the user a good control of the torque of the drill bit.

Applications.

SoftStart™ – electronic current limiter means full speed is reached about two seconds after start. ■ Three-speed water-cooled gearbox for optimal drilling performance and longer service intervals. ■ The plastic housing makes it more durable against drops and daily wear. ■

Handheld core drilling up to Ø 80 mm. ■ Can be mounted on Husqvarna drill stands for angle drilling and holes up to 150 mm. ■ For a variety of materials, including reinforced concrete, brick and other building materials. ■ Suitable for ventilation, plumbing pipes, joints, electrical sockets and telecom cables. ■

Benefits.

Equipped with Elgard™ which uses pulsation to indicate when the machine is overloaded. This extends product life. ■ When making a starter hole or cutting through reinforcement speed can be reduced by half using SmartStart. ■

Technical specifications. Power 1-phase rated voltage Spindle speed full load Spindle thread Drill diameter, with stand / handheld, max Weight

1850 W 230 V 580 / 1400 / 2900 rpm 1 1 / 4" UNC and G 1 / 2" 150 / 80 mm 7.0 kg

More technical specifications on page 163.

Product specifications. DM 230, 1 / 2" inner thread, 230 V

968 41 14 01

Diamond drill bits.

MATERIAL

D 1200 DIAgRIp™ sERIEs

NATURAL sTONE, gRANITE / sANDsTONE C O N C R E TE , H A R D C O N C R E TE , M E D I U M C O N C R E TE , s O FT C O N C R E TE , A B R A s I V E BRICK CEME NT BLOCKs

Read more on page

150

C 400 sERIEs

D 1220

D 1235

C 620

C 420

l l l l

l l

170

171

172

174

–

A s p H A LT

l = Optimal l = Good l = Acceptable

C 600 sERIEs

D 1210

– = Not recommended

–

A large selection of slurry collectors.

V- and U-shaped slurry collectors.

Centring device, for a smooth start of the hole.

Anchoring kit, incl large nut, holding screw, pointer and 5 anchors.

Pressurised water tank holds WT 15 – battery-powered 15 litres and comes with a water tank. 3-meter hose.

Anchoring systems, for anchoring in abrasive materials. M

Dust extraction adapter.

Telescopic start help device, for an easy and safe start.

Drill motor keys.

Washer quick release, to release the drill motor thread from the drill bit. J

Front handle designed for a good user comfort.

Large selection of adapters to suit various threads.

Extensions, for deep drilling with standard drill bits.

Accessories. A A A A B B C D E F F G G H I

Slurry collector, 65 mm Slurry collector, 110 mm Slurry collector, 130 mm Slurry collector, 160 mm Slurry collector V-shaped, 700 mm Slurry collector U-shaped, 212 mm Centering device Telescopic start help device Washer quick release Anchoring kit Anchors Anchoring system, 1 m Anchoring system, 1.5 m Pressurised water tank Water pump,WT 15, 230 V

531 28 00-00 531 28 00-01 531 28 02-95 531 28 00-02 531 28 00-07 531 28 03-29 543 07 24-26 522 93 50-01 543 03 91-82 502 43 48-01 502 43 54-01 502 43 49-01 502 43 50-01 506 32 63-02 966 70 83-03

J K K L M M M M M N

Transport box Front handle Drill motor keys, 24 mm Drill motor keys, 32 mm Dust extraction adapter, 1 / 2" G M – 1 1 / 4" M Adapter drill bit *, 1 / 2" G M – M 16 M Adapter drill bit *, 1 1 / 4" F – CR 128 M Adapter drill bit *, 1 / 2" G M – CR 128 M Adapter drill bit *, 1 1 / 4" F – Cooler Adapter drill bit *, 1 / 2" G M – 1 / 2" G M Extension drill bit *, 500 mm, 1 1 / 4" F – 1 1 / 4" M, aluminium

502 29 45-01 504 04 47-01 531 14 09-51 531 14 09-52 543 07 70-61 543 07 15-04 531 07 20-02 531 07 20-00 543 05 74-71 543 09 35-28 543 04 65-07

* See page 175 for more drill bit accessories.

Available drill stands. DS 150

Drill diameter, max mm

150

Travel, max mm

495

Weight, incl. carriage, kg

15.5

Read more on page

155

151

Husqvarna DM 220. Use the QR-tag to check out more about DM 220.

Ergonomically designed handles for stable drilling and easy transport.

When drilling without stand, the electronic positioning system guides the operator to drill in the correct preferred angle.

Applications.

Handheld core drilling up to Ø 80 mm. ■ Can be mounted on a Husqvarna drill stand for angle drilling and holes up to 150 mm. ■ For a variety of materials, including reinforced concrete, brick and other building materials. ■ Suitable for ventilation, plumbing pipes, joints, electrical sockets and telecom cables. ■ Can be used for both dry and wet drilling. ■

Equipped with Elgard™, which uses pulsation to indicate when the machine is overloaded. This extends product life. ■ When making a starter hole, speed can be reduced by half using SmartStart. This function is integrated in the trigger. ■ Built-in SoftStart™ – electronic current limiter means full speed is reached about two seconds after start. ■

Technical specifications.

Benefits.

Adapted to all types of users – from beginners to professionals. ■ Has a new level guiding system that guides the operator, increases precision, and through that, provides more efficient drilling. ■ The machine’s front handle can be turned 360 degrees, which is useful when drilling in cramped areas. ■ The electronic positioning system guides the operator to drill in vertical, horizontal or preferred angled position. ■

Power 1-phase rated voltage Spindle speed full load Spindle thread Drill diameter, with stand / handheld, max Weight

1850 W 2300 V 580 / 1400 / 2900 rpm 1 1 / 4" UNC and G 1 / 2" 150 / 80 mm 7.5 kg

More technical specifications on page 163.

Product specifications. DM 220, 1 1 / 4" outer thread 1 / 2" inner thread, 230 V

966 56 35 04

Diamond drill bits. MATERIAL

D 1200 DIAgRIp™ sERIEs

NATURAL sTONE, gRANITE / sANDsTONE C O N C R E TE , H A R D C O N C R E TE , M E D I U M C O N C R E TE , s O FT C O N C R E TE , A B R A s I V E BRICK CEME NT BLOCKs

Read more on page

152

C 400 sERIEs

D 1220

D 1235

C 620

C 420

l l l l

l l

170

171

172

174

–

A s p H A LT

l = Optimal l = Good l = Acceptable

C 600 sERIEs

D 1210

– = Not recommended

–

A large selection of slurry collectors.

V- and U-shaped slurry collectors.

Centring device, for a smooth start of the hole.

Washer quick release, to release the drill motor thread from the drill bit.

Anchoring kit, incl large nut, holding screw, pointer and 5 anchors.

Large selection of adapters to suit various threads.

Telescopic start help device, for an easy and safe start. H

Pressurised water tank WT 15 – battery-powered holds 15 litres and comes water tank. with a 3-meter hose.

Front handle designed for a good user comfort.

NEW

DC 1400 is an efficient, compact, single-phase dust collection unit. DM 220 and DC 1400 makes a perfect combination for dry drilling jobs when an easily portable equipment is needed. Read more on page 110.

Extensions, for deep drilling with standard drill bits.

Accessories. A A A A B B C D E F F G H

531 28 00-00 531 28 00-01 531 28 02-95 531 28 00-02 531 28 00-07 531 28 03-29 543 07 24-26 522 93 50-01 543 03 91-82 502 43 48-01 502 43 54-01 506 32 63-02 966 70 83-03

I J J J J J K K K K K K L

Transport box Front handle Adapter drill bit *, 1 / 2" G M – M 16 M Adapter drill bit *, 1 1 / 4" F – CR 128 M Adapter drill bit *, 1 / 2" G M – CR 128 M Adapter drill bit *, 1 1 / 4" F – Cooler Adapter drill bit *, 1 / 2" G M – 1 / 2" G M Extension drill bit *, 250 mm, 1 / 2" G M – M 16 M Extension drill bit *, 100 mm, 1 / 2" G M – 1 / 2" G F Extension drill bit *, 250 mm, 1 / 2" G M – 1 / 2" G F Extension drill bit *, 500 mm, 1 / 2" G M – 1 / 2" G F Extension drill bit *, 300 mm, 1 1 / 4" F – 1 1 / 4" M, aluminium Extension drill bit *, 500 mm, 1 1 / 4" F – 1 1 / 4" M, aluminium DC 1400

502 29 45-01 504 04 47-01 543 07 15-04 531 07 20-02 531 07 20-00 543 05 74-71 543 09 35-28 543 06 03-24 543 04 62-99 531 07 20-06 543 04 64-22 543 06 03-88 543 04 65-07 966 76 68 02

* See page 175 for more drill bit accessories.

Available drill stand. DS 250

Drill diameter, max mm

250

Travel, max mm

685

Weight, incl. carriage, kg

16.0

Read more on page

154

153

Husqvarna DS 250. Applications.

For core drilling in walls, floors and roofs, up to Ø 250 mm. ■ For a variety of materials, including reinforced concrete, brick and other building materials. ■ For drilling holes such as channels for ventilation, plumbing and joints. ■ Suitable for stitch and angle drilling. ■

Benefits.

Being light, compact and wheeled, the stand is easy to transport and install. ■ Two-speed carriage gear box lets you choose crank speed for optimal performance, depending on application. ■ Integrated vacuum base for fast and easy setup without anchoring. ■ Equipped with guide rollers for stable and accurate drilling as well as cleaner and straighter holes. ■ The carriage has a universal quick connection plate for fast installation, and it fits most products on the market. ■ The back support is clamped to the column with a patented rigid solution, for stable drilling. ■ All adjusting screws on base plate, carriage and back support can be adjusted with the supplied feeding handle. ■ The stand has a jacking screw on the top for easy clamping of the stand. ■ The baseplate can also be used as a vacuum plate. ■

Two speed carraige gear box and quick connection plate for optimal drilling performance and fast mounting of the drillmotor.

Technical specifications. Drill diameter, max Travel length Weight

250 mm 685 mm 16.0 kg

More technical specifications on page 165.

Product specifications.

Available drill motors for DS 250. TECHNICAL SPECIFICATIONS

Dm 220

Input power,W

1850

Motor

1-phase electric

Voltage,V

230

Drill diameter, max mm

150

Weight, kg

7.5

Read more on page

152

Vacuum pump with powerful electric motor and tubularshaped tank.

154

Vacuum gasket.

DS 250

Anchoring kit, incl large nut, holding screw, pointer and 5 anchors.

966 82 73 01

A large selection of slurry collectors.

Husqvarna DS 150. Applications.

Lighter core drilling up to Ø 150 mm in walls, floors and ceilings. ■ For a variety of materials, including reinforced concrete, brick and other building materials. ■ Smaller jobs requiring fast setup, such as smaller channels and pipes. ■

Benefits.

Being light and compact, the stand is easy to transport and install. ■ Fast setup with the integrated vacuum base, with no need for anchoring or clamping. ■ Equipped with guide rollers for stable and accurate drilling as well as cleaner and straighter holes. ■ The back support is clamped to the column with a patented rigid solution, for stable drilling. ■ All adjusting screws on base plate, carriage and back support can be adjusted with the supplied feeding handle. ■ The stand has a jacking screw on the top for easy clamping of the stand. ■ The baseplate can also be used as a vacuum plate. ■

Accessories for DS 250 and DS 150. A B B B C C D D D D D D D D E E F

Vacuum pump,VP 200 Vacuum gasket Vacuum cap Male fitting Anchoring kit, incl. 5 expanders Anchoring kit, box 50 expanders Slurry collector, 65 mm Slurry collector, 110 mm Slurry collector, 132 mm Slurry collector, 160 mm Slurry collector, 180 mm Slurry collector, 210 mm Slurry collector, 220 mm Slurry collector, 260 mm Slurry collector V-shaped, 350 mm Slurry collector V-shaped, 700 mm Slurry collector U-shaped, 212 mm Wheelbase DS 250 / 150

V-shaped slurry collectors.

Technical specifications. 544 92 90-01 541 40 48-91 541 40 49-04 541 40 40-71 502 43 48-01 502 43 54-01 531 28 00-00 531 28 00-01 531 28 02-95 531 28 00-02 531 28 02-96 531 28 00-03 531 07 46-82 531 28 00-04 531 07 46-22 531 28 00-07 531 28 03-29 541 40 50-89

Drill diameter, max Travel length Weight

150 mm 495 mm 15.5 kg

More technical specifications on page 165.

Product specifications. DS 150

966 82 72 01

Available drill motors for DS 150. TECHNICAL SPECIFICATIONS

Dm 230

Input power,W

1850

Motor

1-phase electric

Voltage,V

230

Drill diameter, max mm

150

Weight, kg

7.0

Read more on page

150

U-shaped slurry collectors.

155

Husqvarna DS 70 ATS. Applications.

For heavy core drilling up to Ø 650 mm. Has a travel length of 680 mm. ■ Applications where good stability and fixing is needed. ■ For a variety of materials, including reinforced concrete, brick and other building materials. ■ Large holes for channels and stitch drilling. ■

Benefits.

In combination with DM 406 H, this is the ultimate solution for drilling large holes. ■ Outstanding drilling performance due to high stability and rigidity. ■ The column is turnable 360° for quicker positioning and longer travel length. ■ The column is tiltable 180°, providing flexibility for drilling in various positions. ■ The back support ensures optimum strength and accuracy when drilling. ■

Technical specifications. Drill diameter, max Travel length Weight

650 mm 680 mm 37 kg

More technical specifications on page 164.

Product specifications. DS 70 ATS

965 16 49 02

Available drill motors DS 70 ATS and DS 450. TECHNICAL SPECIFICATIONS

Dm 340

Dm 406 H

Dm 280

Input power,W

3300

9300 W at 40 l / min

2700

Motor

1-phase electric

Hydraulic

230

–

1-phase electric

Voltage,V Drill diameter, max mm

400

650

350

Weight, kg

14.0

16.0

13.0

Read more on page

144

148

146

Tool kit.

156

Anchoring kit, incl large nut, holding screw, pointer and 5 anchors.

3 spoke handle.

230 / 110

The new, automatic drill system Vacuum pump with powerful electric motor and tubularAD 10 makes drilling more shaped tank. effective and less strenuous. Read more on page 142.

Husqvarna DS 450. Applications.

For heavy core drilling in walls, floors and roofs, up to Ø 450 mm. ■ For a variety of materials, including reinforced concrete, brick and other building materials. ■ For larger holes such as channels for ventilation, plumbing and stitch drilling with larger holes. ■

Use the QR-tag to check out more about DS 450.

Benefits.

Being light, compact and wheeled, the stand is easy to transport and install. ■ The two speed carriage gearbox gives the possibility to choose cranking speed for best drilling performance. ■ Equipped with 8 guide rollers, for good positioning of the carriage and stable drilling. ■ The column is protected with plastic strips on the side to prevent damage during transport and scratches when opening the drill bit with a key. ■ All adjusting screws on carriage and back support can be adjusted with the supplied 3-spoke handle. ■ The baseplate can also be used as a vacuum plate. ■

Technical specifications. Drill diameter, max Travel length Weight

450 mm 700 mm 24.0 kg

More technical specifications on page 164.

Product specifications. DS 450, 700 mm

966 82 98 07

Accessories for DS 70 ATS and DS 450. A B B D E F F F F F

Tool kit, incl. in standard package Anchoring kit, incl. 5 expanders Anchoring kit, box 50 expanders 3 spoke handle AD 10 Vacuum pump,VP 200 Slurry collector, 160 mm Slurry collector, 180 mm Slurry collector, 210 mm Slurry collector, 220 mm

A large selection of slurry collectors.

506 40 86-01 502 43 48-01 502 43 54-01 541 40 50-39 966 66 66-04 544 92 90-01 531 28 00-02 531 28 02-96 531 28 00-03 531 07 46-82

V- and U-shaped slurry collectors.

F F G G G H I J K

Slurry collector, 260 mm Slurry collector, 310 mm Slurry collector V-shaped, 350 mm Slurry collector V-shaped, 700 mm Slurry collector U-shaped, 212 mm Spacer for quick mounting Vacuum plate Wheels Short column, 100 cm

Spacer, 50 mm, for quick mounting when drilling with large drill bits.

Vacuum plate.

531 28 00-04 531 28 00-05 531 07 46-22 531 28 00-07 531 28 03-29 541 40 51-82 541 40 50-93 541 40 50-83 576 89 88-01

Wheels.

Short column.

157

Husqvarna DMS 240. Applications.

For medium core drilling in walls, floors and roofs, up to Ø 250 mm. ■ For a variety of materials, including reinforced concrete, brick and other building materials. ■ Suitable for drilling ventilation and plumbing channels, waste evacuation pipes, barriers and road signs. ■ For angle and stitch drilling. ■

Benefits.

Electronic overload protection helps prevent overheating and extends product life. ■ Supplied with wheels, for easier transportation. ■ Two-speed carriage gear box lets you choose crank speed for optimal performance, depending on application. ■ The integrated vacuum base means setup is fast and easy, with no need for anchoring or clamping. ■ The drill stand is tiltable and the back support has a rigid locking system, for reliable and stable angle drilling. ■ The baseplate can also be used as a vacuum plate. ■

Technical specifications. Power 1-phase rated voltage Spindle speed full load Drill diameter, max Weight

2400 W 230 V 185 / 455 rpm 250 mm 25.0 kg

More technical specifications on page 165.

Product specifications. DMS 240, 230 V

965 17 36 04

Diamond drill bits. MATERIAL

C 400 sERIEs C 420

NATURAL sTONE, gRANITE / sANdsTONE

l l l l l

C O N C R E TE , H A R d C O N C R E TE , M E d I U M C O N C R E TE , s O FT C O N C R E TE , A B R A s I V E

–

A s P H A LT

l l

BRICK CEMENT BLOCKs

Read more on page l = Optimal l = Good l = Acceptable

158

174

– = Not recommended

A large selection of slurry collectors.

V-shaped slurry collectors.

U-shaped slurry collectors.

Washer quick release, to release the drill motor thread from the drill bit. I

Dust extraction adapter.

Large selection of adapters to suit various threads.

Anchoring kit, incl large nut, holding screw, pointer and 5 anchors.

Vacuum pump with powerful electric motor and tubular-shaped tank.

Pressurised water tank holds 15 litres and comes with a 3-meter hose.

WT 15 – battery-powered water tank.

Extensions, for deep drilling with standard drill bits.

Accessories. A A A A A A A B C D D E F G H I J J K K K

Slurry collector, 65 mm Slurry collector, 110 mm Slurry collector, 132 mm Slurry collector, 160 mm Slurry collector, 180 mm Slurry collector, 210 mm Slurry collector, 220 mm Slurry collector V-shaped, 700 mm Slurry collector U-shaped, 212 mm Anchoring kit, incl. 5 expanders Anchoring kit, box 50 expanders Washer quick release Vacuum pump,VP 200 Pressurised water tank Water pump,WT 15, 230 V Dust extraction adapter, 1 / 2" G M – 1 1 / 4" M Adapter drill bit *, 1 1 / 4" F – 1 / 2" G F Extension drill bit *, 200 mm, 1 1 / 4" F – 1 1 / 4" M, steel Extension drill bit *, 300 mm, 1 1 / 4" F – 1 1 / 4" M, steel Extension drill bit *, 500 mm, 1 1 / 4" F – 1 1 / 4" M, steel Extension drill bit *, 1000 mm, 1 1 / 4" F – 1 1 / 4" M, steel

531 28 00-00 531 28 00-01 531 28 02-95 531 28 00-02 531 28 02-96 531 28 00-03 531 07 46-82 531 28 00-07 531 28 03-29 502 43 48-01 502 43 54-01 543 03 91-82 544 92 90-01 506 32 63-02 965 97 10-01 543 07 70-61 543 04 64-26 543 04 65 01 543 04 65-02 543 04 65-04 543 04 65-05

* See page 175 for more drill bit accessories.

159

Husqvarna DMS 160 AT.

Benefits.

The DMS 160 AT can be pivoted and tilted, with a quick connection between the column and base. ■ The pivot column of the DMS 160 AT can be angled 80° and rotated 360°, so the operator enjoys optimal drilling flexibility with a single setup. ■ The DMS 160 A has a fixed column with base plate and expander bolt. ■ The drilling load indicator (LED) displays the current load on the machine, enabling the user to maximise drilling speed, for highly efficient operation. ■ The drill motor is equipped with electronic overload protection which helps prevent overheating and extends product life. ■ An integrated slip-clutch protects the machine and the tool from strong external forces, for greater durability. ■

Technical specifications. Applications.

Core drilling in walls, floors and roofs, up to Ø 120 mm. ■ For a variety of materials, including reinforced concrete, brick and other building materials. ■ Stitch drilling and drilling close to walls /edges. ■ Suitable for lighter applications such as small channels and pipes, electrical sockets and telecom cables, anchoring and gas supply pipes. ■

Power 1-phase rated voltage Spindle speed full load Drill diameter, max Weight, DMS 160 AT

1550 W 230 V 1100 rpm 120 mm 12.0 kg

More technical specifications on page 165.

Product specifications. DMS 160 AT, 230 V

965 15 75 12

Diamond drill bits. mATERIAL

SHS 600

–

TILES NATURAL STONE, GRANITE NATURAL STONE, SANDSTONE CONCRE TE, HARD CONCRE TE, mEDI Um CONCRE TE, SOFT CONCRE TE, ABRAS IVE ASPHA LT BRICK CEmE NT BLOCKS

Read more on page l = Optimal l = Good l = Acceptable

160

l l l l l l l l l 172

– = Not recommended

Tool kit.

Anchoring kit, incl large nut, holding screw, pointer and 5 anchors. G

WT 15 â&#x20AC;&#x201C; battery-powered water tank. J

Drill motor keys.

Dust extraction adapter.

Large selection of adapters to suit various threads.

Small-diameter vacuum plate.

Dust and slurry control device.

Vacuum pump with powerful electric motor and tubularshaped tank.

Pressurised water tank holds 15 litres and comes with a 3-meter hose.

A large selection of slurry collectors.

Extensions, for deep drilling with standard drill bits.

Accessories. A B B C D E F G H I I J K L m m

Tool kit, incl. in standard package Anchoring kit, incl. 5 expanders Anchoring kit, box 50 expanders Small-diameter vacuum plate Vacuum pump,VP 200 Pressurised water tank Water pump,WT 15, 230 V Drill motor keys, 27 mm Dust and slurry control device, 132 mm Slurry collector, 65 mm Slurry collector, 110 mm Slurry collector V-shaped, 700 mm Slurry collector U-shaped, 212 mm Dust extraction adapter, 1 / 2" G M â&#x20AC;&#x201C; 1 1 / 4" M Adapter drill bit Adapter drill bit

506 40 86-01 502 43 48-01 502 43 54-01 544 45 84-01 544 92 90-01 506 32 63-02 965 97 10-03 544 42 72-01 531 28 02-95 531 28 00-00 531 28 00-01 531 28 00-07 531 28 03-29 543 07 70-61 543 04 64-98 531 07 20-00

161

Technical specifications for drill motors.

Dm 340

Dm 280

Power, W

3300

2700

Motor

1-phase, electric

Voltage, V

230

230 / 110

Speeds

Spindle speed full load, rpm

240 / 540 / 930

350 / 780 / 1340 * 240 / 540 / 930 **

400

250 / 350

Drill diameter with stand, max mm Drill diameter handheld, max mm Mounting collar, mm Spindle thread, outer

– –

1 1 / 4" 7 UNC

–

1 1 / 4" 7 UNC

Spindle thread, inner UNC water coupling

G 1 / 4"

–

Sound pressure level, dB (A)

Sound power level, dB (A)

14.0

13.0

Weight, kg Flow, max l / min Pressure, max bar

– –

Recommended drill stand

DS 450

DS 450, DS 50 ATS

Read more on page

144

146

* High speed version. ** Low speed version.

162

Dm 406 H

Dm 230

Dm 220

9300 W at 40 l / min

1850

Hydraulic

1-phase, electric

1-phase electric

–

230 / 110

120 / 230 / 340 / 580 / 980 / 1400

580 / 1400 / 2900

650

150

– –

1 1 / 4" 7 UNC / CR 128

–

R 1 / 2"

–

1 1 / 4" 7 UNC

G 1 / 2" or 5 / 8" 11 UNC

– –

G 1 / 4"

16.0

7.0

140

– –

7.5

DS 70 ATS

DS 40 Gyro, DS 150

DS 250

148

150

152

– –

163

Technical specifications for drill stands.

DS 70 ATS

DS 450

Drill diameter, max mm

650

450

Travel, max mm

680

700

Length, telescopic stanchion, m

–

Pivoting

Continuously adjustable

Angling

+ / – 90°

0–60°

Weight, incl. carriage, kg

24.0

Available drill motor

DM 340, DM 406 H, DM 280

DM 340, DM 280

Read more on page

156

157

164

– –

Technical specifications for drill motors with stand.

Power, W

DmS 240

DmS 160 AT

2400

1550

Motor

1-phase, electric

Voltage, V

230 / 110

Spindle speed full load, rpm

185 / 455

1100

Drill connection

1 1 / 4" 7 UNC

R 1 / 2"

Drill diameter, max mm

250

120

Travel, max mm

685

700

Column height, mm

1000

890

Total weight, kg

25.0

12.0

Sound pressure level, dB (A)

Sound power level, dB (A)

106

102

Read more on page

158

160

DS 250

DS 150

250

150

685

495

0– 60°

0–60°

16.0

15.5

DM 280 HS, DM 220

DM 230

154

155

– –

165

With more than 30 years of experience, Husqvarna continues to develop state-of-the-art diamond drill bits for professionals and frequent users. Our drill bit range consists of four series. The B 1200 series has segments with Diagripâ&#x201E;˘, the revolutionary technology that yields superior cutting capacity, longer life and a smooth, rapid cut.

166

The C 600 series contains light weight, mainly laserwelded bits for major indoor handheld applications. The C 400 series are reliable, laser-welded bits with a high purchasing value for non-intensive use in heavier applications.

DiamonD tools for DrillinG

full range summary. Range

UseR pRofile

seRvice

pRoDUcTs

B 1200

Very intensive professionals

• All dimensions and connectors on request • Segment sales • Retipping • Kits

D 1210

–

C 420

c 600

Specialised professionals

c 400

Non-intensive professionals

D 1220

DRY / WeT

connecToR

DiameTeRs, mm

lengTh, mm

1/ 2" G – 1 1/4" – CR 128

8 – any

350 – 450

1 1/4" – CR 128

52 – any

450

1/ 2" G – 1 1/4" – CR 128

36 – any

350 – 450

Dry / Wet

HEX – M14

5 – 85

30 – 45

Wet

1 1/4"

32 – 250

450

Wet

D 1235 C 620

application chart. maTeRial

1200 seRies D 1210

Tiles naTURal sTone, gRaniTe naTURal sTone, sanDsTone concRe Te, haRD concRe Te, meDi Um concRe Te, sofT concRe Te, aBRas ive aspha lT BRicK ceme nT BlocKs

Read more on page l = Optimal l = Good l = Acceptable

D 1220

–

D 1235

–

600 seRies

400 seRies

c 620

c 420

l l l l l l l

l l l l l l

l l

l l l l l l l l l l

170

171

172

–

l l l l l l

–

l l 174

– = Not recommended

167

DIAMOND TOOLS FOR DRILLING

Husqvarna D 1200 Diagrip™ series. Husqvarna extends the Diagrip portfolio by adapting this unique technology to one of the most sensitive construction applications; drilling. The D 1200 has been developed and tested in the four most representative types of concrete with the ambition to establish a new benchmark in each of these applications. Each product has then been designed for a specific type of application in order to provide the user with the best profitability in each case. Provides the best performance and profitability in each concrete type. ■ The segment design results in optimised cooling, efficient disposal of slurry, high speed cutting, quick and easy start and less vibrations. ■ The shape differentiation allows the user to mix segments to get optimised durability and speed in every application. ■ With its wide application window the D 1200 is perfect for the most demanding professionals such as drilling and contruction workers. ■

MATERIAL TILES NATURAL STONE, gRANITE NATURAL STONE, SANDSTONE CONCRE TE, HARD CONCRE TE, MEDI UM CONCRE TE, SOFT CONCRE TE, ABRAS IVE BRICK CEME NT BLOCKS

168

D 1220

D 1235

l l l l l l l

l l l l l l

l l

–

ASPHA LT

l = Optimal l = Good l = Acceptable

D 1210

– = Not recommended

–

Revolutionary diamond tool technology for superior cutting capacity and durability. One of the greatest benefits with the Diagrip™ technology is how fast and smooth the diamond tools go through all types of construction materials. Diagrip™ tools means trouble-free drilling, especially in heavily reinforced concrete.

The diamonds are specially treated to remain in place in the segments longer, and be distributed optimally, delivering maximum efficiency to every diamond. With Diagrip™, the diamonds are exposed and expended at an even rate, which makes the edge very even and powerful, even when cutting hard materials like reinforced concrete.

Diagrip™ drill bits provides the best performance and profitability in each concrete type and is the right choice for demanding professionals.

The corrugated shape allows a very free cutting behaviour in hard conditions.

The full shape allows to keep a good side clearance in more abrasive conditions.

Different lengths and connector sizes helps to ensure a job runs smoothly, reducing downtime.

169

DIAMoND TooLS foR DRILLING

Husqvarna D 1210 Diagrip™.

The specific corrugated segment shape offers more free cutting in hard conditions.

EASY DRILLING WITH HIGH SPEED

High speed and outstanding free cutting in very hard concrete and stone. The segment shape helps the mud evacuation and provide less friction. For motors from 1.5 kW. PRODUCT NUmBER

DIAmETER, mm

SEGmENT DImENSIONS, mm (L×W×H)

NUmBER OF SEGmENTS

522 68 24 01 579 09 39 01 579 10 32 01 522 68 27 01 579 09 42 01 579 10 42 01 579 09 51 01 522 68 30 01 579 10 43 01 522 68 32 01 579 09 52 01 574 52 96 04 522 68 36 01 579 09 53 01 525355146 522 68 42 01 522 68 44 01 522 68 45 01 522 68 46 01 579 09 54 01 579 10 44 01 579 09 55 01 579 09 56 01 579 09 57 01 579 09 74 01 579 09 75 01 579 09 76 01 579 09 77 01 579 09 78 01 579 09 79 01 579 09 80 01 579 09 81 01 522 68 61 01

52 55 57 62 65 67 70 72 77 82 89 92 102 108 115 127 132 142 152 166 178 204 229 254 280 305 331 356 381 407 431 458 500

24 × 3.5 × 9.3 24 × 3.5 × 9.3 24 × 3.5 × 9.3 24 × 3.5 × 9.3 24 × 3.5 × 9.3 24 × 3.5 × 9.3 24 × 3.5 × 9.3 24 × 3.5 × 9.3 24 × 3.5 × 9.3 24 × 3.5 × 9.3 24 × 3.5 × 9.3 24 × 3.5 × 9.3 24 × 3.5 × 9.3 24 × 3.5 × 9.3 24 × 3.5 × 9.3 24 × 3.5 × 9.3 24 × 3.5 × 9.3 24 × 3.5 × 9.3 24 × 3.5 × 9.3 24 × 4 × 9.3 24 × 4 × 9.3 24 × 4 × 9.3 24 × 4 × 9.3 24 × 4.5 × 9.3 24 × 4.5 × 9.3 24 × 4.5 × 9.3 24 × 4.5 × 9.3 24 × 4.5 × 9.3 24 × 4.5 × 9.3 24 ×5 × 9.3 24 ×5 × 9.3 24 ×5 × 9.3 24 ×5 × 9.3

5 5 5 6 6 6 6 6 6 8 8 8 9 9 10 11 11 12 13 13 14 15 16 18 20 22 24 26 28 30 32 33 36

All items with 1 1/4" connectors have a standard length of 450 mm. Other diameters available on request.

170

Husqvarna D 1220 Diagrip™.

The full segment shape gives an easy start and allows a trouble free job in even in hard concrete as well as in medium abrasive.

DURABILITY IN TOUGH CONDITIONS

Offers optimal performance in medium to hard concrete. Provides high speed and great performance even in difficult conditions. For motors from 2.4 kW. PRODUCT nUmbeR (COnneCTOR 1 1/4")

DIAmeTeR, mm

SeGmenT DImenSIOnS, mm (L ×W × H)

nUmbeR OF SeGmenTS

522 69 60 01 579 09 94 01 575 53 93 01 522 69 61 01 579 09 95 01 575 53 98 01 579 09 96 01 522 69 62 01 575 71 72 01 522 69 63 01 579 09 97 01 575 39 32 01 522 69 65 01 579 09 98 01 525 35 52 42 522 69 69 01 522 69 70 01 522 69 71 01 522 69 72 01 579 09 99 01 577 90 74 04 579 10 01 01 579 10 02 01 579 10 03 01 578 27 45 01 579 10 05 01 579 10 06 01 579 10 07 01

52 55 57 62 65 67 70 72 77 82 89 92 102 108 115 127 132 142 152 166 178 204 229 254 280 305 331 356

24 × 3.5 × 9.3 24 × 3.5 × 9.3 24 × 3.5 × 9.3 24 × 3.5 × 9.3 24 × 3.5 × 9.3 24 × 3.5 × 9.3 24 × 3.5 × 9.3 24 × 3.5 × 9.3 24 × 3.5 × 9.3 24 × 3.5 × 9.3 24 × 3.5 × 9.3 24 × 3.5 × 9.3 24 × 3.5 × 9.3 24 × 3.5 × 9.3 24 × 3.5 × 9.3 24 × 3.5 × 9.3 24 × 3.5 × 9.3 24 × 3.5 × 9.3 24 × 3.5 × 9.3 24 × 4 × 9.3 24 × 4 × 9.3 24 × 4 × 9.3 24 × 4 × 9.3 24 × 4.5 × 9.3 24 × 3.5 × 9.3 24 × 4.5 × 9.3 24 × 3.5 × 9.3 24 × 4.5 × 9.3

5 5 5 6 6 6 6 6 6 8 8 8 9 9 10 11 11 12 13 13 14 15 16 18 20 22 24 26

All items with 1 1/4" connectors have a standard length of 450 mm. Other diameters available on request.

Husqvarna D 1235 Diagrip™.

The corrugated segment design offers more free cutting and higher speed, better mud evacuation and less friction.

AVAILABLE AS SPECIAL ORDER ONLY

An all-round drill bit for fast and smooth cuts in all standard applications. For motors from 2.4 kW. PRODUCT nUmbeR (COnneCTOR 1 1/4")

DIAmeTeR, mm

SeGmenT DImenSIOnS, mm (L ×W × H)

nUmbeR OF SeGmenTS

522 68 76 01 579 13 43 01 579 13 44 01 522 68 79 01 579 13 50 01 522 68 79 15 579 13 52 01 522 68 82 01 575 54 28 01 522 68 84 01 579 13 54 01 575 47 64 01 522 68 88 01 579 13 55 01 522 68 94 01 522 68 96 01 522 68 97 01 522 68 98 01 579 14 38 01 579 14 39 01 579 14 41 01 579 14 50 01

52 55 57 62 65 67 70 72 77 82 89 92 102 108 127 132 142 152 166 178 204 229

5 5 5 6 6 6 6 6 6 8 8 8 9 9 11 11 12 13 13 14 15 16

All items with 1 1/4" connectors have a standard length of 450 mm. Other diameters available on request.

171

DIAMoND TooLS foR DRILLING

Husqvarna C 600 Series. Extreme performance on medium to high powered (3 to 7 hp) electric and hydraulic drilling machines. HUSQVARNA C 620 CROWNS

The C 620 crowns range from Husqvarna gives you the most flexible solution for all type of concrete drilling application for diameter below 52 mm. The crowns have been optimised to give the best speed / life ratio in low to medium reinforced concrete on low to medium power drills. PRODUCT NUMBER

DIAMETER, MM

CONNECTOR

NO. OF SEGMENTS

SEGMENT LENGTH, MM

SEGMENT WIDTH, MM

SEGMENT HEIGHT, MM

1 1 / 4" UNC 1 1 / 4" UNC 1 1 / 4" UNC 1 1 / 4" UNC 1 1 / 4" UNC 1 1 / 4" UNC 1 1 / 4" UNC 1 1 / 4" UNC 1 1 / 4" UNC 1 1 / 4" UNC 1 1 / 4" UNC 1 1 / 4" UNC 1 1 / 4" UNC 1 1 / 4" UNC 1 1 / 4" UNC 1 1 / 4" UNC 1 1 / 4" UNC

Crown Crown Crown Crown Crown Crown Crown Crown Crown Crown Crown Crown Crown Crown Crown Crown Crown

― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ―

3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2

9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9

HUSQVARNA C 620 CROWNS

5 3 1 2 1 27 31 5 3 1 2 1 27 32 5 3 1 2 1 27 33 5 3 1 2 1 27 34 5 3 1 2 1 27 35 5 3 1 2 1 27 36 5 3 1 2 1 27 37 5 3 1 2 1 27 38 5 3 1 2 1 27 39 5 3 1 2 1 27 40 5 3 1 2 1 27 41 5 3 1 2 1 27 42 5 3 1 2 1 27 43 5 3 1 2 1 27 44 5 3 1 2 1 27 45 5 3 1 2 1 27 46 5 3 1 2 1 27 47

12 14 16 18 20 22 24 25 26 28 29 32 35 38 39 42 45

All codes refer to a utile length of 450 mm and a 1 1 / 4" connector. Other connectors, diameters and lengths are available on request.

Husqvarna SHS 600 Crowns PRODUCT NUMBER

DIAMETER, MM

CONNECTOR

NO. OF SEGMENTS SEGMENT LENGTH, MM

SEGMENT WIDTH, MM

SEGMENT HEIGHT, MM

1 / 2" 1 / 2" 1 / 2" 1 / 2" 1 / 2" 1 / 2" 1 / 2" 1 / 2" 1 / 2" 1 / 2" 1 / 2" 1 / 2" 1 / 2" 1 / 2" 1 / 2" 1 / 2" 1 / 2"

Crown Crown Crown Crown Crown Crown Crown Crown Crown Crown Crown Crown Crown Crown Crown Crown Crown

2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8

9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9

HUSQVARNA SHS 600

5 3 1 2 13 42 1 5 3 1 2 1 34 22 5 3 1 2 1 34 23 5 3 1 2 1 34 24 5 3 1 2 1 34 25 5 3 1 2 1 34 26 5 3 1 2 1 34 27 5 3 1 2 1 34 28 5 3 1 2 1 34 29 5 3 1 2 1 34 30 5 3 1 2 1 34 31 5 3 1 2 1 34 32 5 3 1 2 1 34 33 5 3 1 2 1 34 34 5 3 1 2 1 34 35 5 3 1 2 1 34 36 5 3 1 2 1 34 37

12 14 16 18 20 22 24 25 26 28 29 32 35 38 39 42 45

― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ―

Application chart. mATERIAL

600 SERIES

TILES NATURAL STONE CONCRE TE, HARD CONCRE TE, mEDI Um CONCRE TE, SOFT CONCRE TE, ABRAS IVE ASPHA LT BRICK CEmE NT BLOCKS l = Optimal l = Good l = Acceptable

172

– = Not recommended

C 620

SHS 600

l l l l l l l l l

Air conditioning kit.

Electrician kit.

Complete solutions package. 5 pieces with the most commonly used diameters, a connector, a centering device, adapters and extension. Weight 6 kg.

Complete solutions package. 4 pieces – 2 diameters 68 and 82 mm, an M 16 connector, a centering device, and adapters. Weight 2.3 kg.

Product specifications.

Air conditioning kit D 625 1/2"

522 97 63-01

Content of kit D 625 M 16.

Drill bit box, D 625 EL

522 97 66-01

Contents.

PRODUcT NUMBER

DEScRIPTION

PIEcES

PRODUcT NUMBER

DEScRIPTION

PIEcES

522 97 32-01 522 97 34-01 522 97 36-01 522 97 40-01 522 97 41-01 522 97 49-01 575 81 98-01 575 81 99-01 575 82 00-01 575 82 01-01

D 625 drill bit, Ø 52 mm, 150 mm, connector M 16 D 625 drill bit, Ø 57 mm, 150 mm, connector M 16 D 625 drill bit, Ø 68 mm, 150 mm, connector M 16 D 625 drill bit, Ø 85 mm, 150 mm, connector M 16 D 625 drill bit, Ø 107 mm, 150 mm, connector M 16 Centering device Adapter drill bit, HEX – M 16 M Adapter drill bit, SDS + – M 16 M Adapter drill bit,1 / 2" GM – M 16 M Extension drill bit, 250 mm, M 16 F – M 16 M

1 1 1 1 1 1 1 1 1 1

522 97 37-01 522 97 39-01 522 97 50-01 575 81 98-01 575 81 99-01

D 625 drill bit, Ø 68 mm, 62 mm, connector M 16 D 625 drill bit, Ø 82 mm, 62 mm, connector M 16 Centering device Adapter drill bit, HEX – M 16 M Adapter drill bit, SDS + – M 16 M

2 2 1 1 1

Big diameters kit.

Adapter drill bit.

Small diameters kit.

Small diameters tile kit.

Big diameters tile kit.

For motors up to 1 kW. Supplied with HEX connectors, easy core removal and centering device for Ø 5 –12 mm. Content: D 605 drill bits, Ø 5, 6, 7, 8, 10, 12 mm.

For motors up to 1 kW. Supplied with M 14 connectors, HEX + SDS adapters and centering device for diameters 20 – 65 mm. Content: D 605 drill bits, Ø 20, 27, 35, 45, 55, 65 mm.

Product specifications. Tile kit

Product specifications. 522 97 61-01

Tile kit

522 97 62-01

173

DIAMOND TOOLS FOR DRILLING

Husqvarna C 400 series. Designed for non-intensive professionals with a wide application window. ■ Laser welded products for trouble free applications. ■ Two specifications for optimised performance in all concrete and abrasive material. ■ Reliable and a good price /performance ratio. ■ Drills through the thickness of most standard walls. ■ Tube length 450 mm. ■

MATERIAL

C 420

–

TILES

l l l l l l

NATURAL STONE, gRANITE NATURAL STONE, SANdSTONE CONCRE TE, HARd CONCRE TE, MEdI UM CONCRE TE, SOFT CONCRE TE, ABRAS IVE

–

ASPHA LT

l l

BRICK CEME NT BLOCKS l = Optimal l = Good l = Acceptable

– = Not recommended

Husqvarna C 420. HIGH SPEED AND FREE CUTTING

For non–intensive use in medium to hard concrete. For motors from 1 kW. PRODUCT NUMBER

DIAMETER, MM

CONNECTOR

NO. OF SEGMENTS SEGMENT LENGTH, MM

SEGMENT WIDTH, MM

SEGMENT HEIGHT, MM

18 20 22 25 28 32 35 38 42 45 52 64 77 83 89 102 108 115 127 152 178 204 254

1 1 / 4" 1 1 / 4" 1 1 / 4" 1 1 / 4" 1 1 / 4" 1 1 / 4" 1 1 / 4" 1 1 / 4" 1 1 / 4" 1 1 / 4" 1 1 / 4" 1 1 / 4" 1 1 / 4" 1 1 / 4" 1 1 / 4" 1 1 / 4" 1 1 / 4" 1 1 / 4" 1 1 / 4" 1 1 / 4" 1 1 / 4" 1 1 / 4" 1 1 / 4"

Crown Crown Crown Crown Crown Crown Crown Crown Crown Crown 4 5 6 6 7 8 8 8 10 13 13 14 18

3.2 3.2 3.2 3.2 3.2 3.5 3.5 3.5 3.5 3.5 3.75 3.75 3.75 3.75 3.75 3.75 4 4 4 4 4 4 9

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

HUSQVARNA C 420

5 2 5 3 5 47 01 5 2 5 3 5 49 01 5 2 5 3 5 50 01 5 2 5 3 5 51 01 5 2 5 3 5 52 01 5 2 5 3 5 53 01 5 2 5 3 5 54 01 5 2 5 3 5 55 01 5 2 5 3 5 56 01 5 2 5 3 5 57 01 5 2 5 3 5 58 01 5 2 5 3 5 59 01 5 2 5 3 5 60 01 5 2 5 3 5 61 01 5 2 5 3 5 62 01 5 2 5 3 5 63 01 5 2 5 3 5 64 01 5 2 5 3 5 65 01 5 2 5 3 5 66 01 5 2 5 3 5 67 01 5 2 5 3 5 68 01 5 2 5 3 5 69 01 5 2 5 3 5 70 01

– – – – – – – – – – 24 24 24 24 24 24 24 32 32 32 32 32 32

All codes refer to a utile length of 450 mm and a 1 1 / 4" connector. Other connectors, diameters and lengths are available on request. * The advised power level is measured in kW.

174

Core drilling accessories.

GENERAL ADAPTERS

ExTENSIoNS

Large selection of adapters to suit various threads used for both dry and wet drill bits. Most threads commonly used in the drilling industry are available.

These extension rods are used when deeper holes need to be drilled using standard drill bits. Available in both steel, and also aluminum for a lighter alternative.

PRODUCT NUMBER

DESCRIPTION

PRODUCT NUMBER

DESCRIPTION

FOR 1 / 2" G M BITS

5 4 3 0 4 64 26 5 4 3 0 3 71 41 5 4 3 0 8 16 29 5 4 3 0 5 85 57

543057368 543046499 543046422

1 1 / 4" F – 1 / 2" G F M 18 F – 1 1 / 4" M / 1 / 2" G F Hilti L – 1 1 / 4" M / 1 / 2" G F Hilti U – 1 1 / 4" M / 1 / 2" G F

FOR 1 1 / 4" F BITS

5 4 3 0 4 64 98 5 4 3 0 8 16 29 5 4 3 0 5 85 57 5 4 3 0 3 71 41

1 / 2" G M – 1 1 / 4" M Hilti L – 1 1 / 4" M / 1 / 2" G F Hilti U – 1 1 / 4" M / 1 / 2" G F M 18 F – 1 1 / 4" M / 1 / 2" G F

1 / 2" G M – 1 / 2" G F 1 / 2" G M – 1 / 2" G F 1 / 2" G M – 1 / 2" G F

LENGTH, MM

MATERIAL

200 300 500

Steel Steel Steel

400 500 200 300 500

Aluminium Aluminium Steel Steel Steel

FOR 1 1 / 4" F BITS

543056605 543046507 543046501 543046502 543046504

1 1 / 4" F – 1 1 / 4" M 1 1 / 4" F – 1 1 / 4" M 1 1 / 4" F – 1 1 / 4" M 1 1 / 4" F – 1 1 / 4" M 1 1 / 4" F – 1 1 / 4" M

FOR DUST EXTRACTION

5 4 3 0 7 70 61

1 / 2" G M – 1 1 / 4" M

175

176

HANDHELD POWER CUTTING

Application overview

178

Range overview

180

Benefit overview

184

Husqvarna petrol power cutters

188

Husqvarna electric power cutters

206

Husqvarna air power cutters

212

Husqvarna hydraulic power cutters

214

Accessories for power cutters

216

Technical specifications for power cutters

220

Diamond tools for power cutters

224

Husqvarna is a world leader when it comes to handheld power cutters. The range includes machines with various types of power sources: petrol, hydraulic, pneumatic and electrical. This means you can always find the right machine to get any job done, with maximum efficiency. We work hard to improve and develop cutting technologies, always focusing on the work situation of the user. Because not until the user can get more done, with greater precision and less effort, can you talk about real efficiency. This real efficiency keeps us ahead of the competition.

177

Handheld power cutting â&#x20AC;&#x201C; application overview.

Floor and wall cutting.

Cutting building blocks, curbstones and garden pavers.

Minor adjustments of window and door openings.

Cutting cast concrete.

Pipe cutting.

Deep cutting in pipe trenches.

178

Cutting grooves for expansion joints and crack repair.

Burying of signal cables.

Asphalt cutting in roadworks.

Rail cutting.

Rescue cutting.

Irregular deep cutting.

179

Handheld power cutting – range overview. APPLICATIONS ■

■

■ ■ ■ ■

■

■ ■ ■ ■

■

■ ■ ■ ■

■

■ ■ ■ ■

180

PRODUCT

TECHNICAL SPECIFICATIONS

PAGE

Cutting of concrete and masonry in alteration, renovation and new construction work. Cutting of smaller openings and adjustment of window and door openings. Cutting of curbstones and pavers in landscaping. Pipe cutting in installation work. Asphalt cutting in roadworks and pre-cutting in pipe trenches. Metal cutting.

Husqvarna K 760.

Engine Air-cooled 2 stroke engine Displacement 74 cc Power 3.7 kW Diamond blade 300 / 350 mm Cutting depth 100 / 125 mm Weight without fuel and cutting equipment 9.7/ 9.9 kg

188

Husqvarna K 760 with OilGuard.

Engine Air-cooled 2 stroke engine Displacement 74 cc Power 3.7 kW Diamond blade 300 / 350 mm Cutting depth 100 / 125 mm Weight without fuel and cutting equipment 9.7/ 9.9 kg

190

Husqvarna K 970.

Engine Air-cooled 2 stroke engine Displacement 94 cc Power 4.8 kW Diamond blade 300 / 350 / 400 mm Cutting depth 100 / 125 / 145 mm Weight without fuel and cutting equipment 10.6 / 11.0 / 11.8 kg

192

Husqvarna K 1260.

Engine Air-cooled 2 stroke engine Displacement 119 cc Power 5.8 kW Diamond blade 350 / 400 mm Cutting depth 125 / 145 mm Weight without fuel and cutting equipment 13.7 / 14.4 kg

194

APPLICATIONS

PRODUCT

TECHNICAL SPECIFICATIONS

PAGE

Deep cutting up to 400 mm. For cutting pipes in pipe trenches, for cutting grooves for cabling, expansion joints and crack repair. Window and door openings where you don’t want overcutting at the corners. Excellent for cutting when burying signal cables.

Husqvarna K 760 Cut-n-Break.

Engine Air-cooled 2 stroke engine Displacement 74 cc Power 3.7 kW Diamond blades 230 mm Cutting depth 400 mm Weight without fuel incl. cutting equipment 11.3 kg

196

Cutting of openings in alteration, renovation and new construction work. Adjustment of window and door openings. Pipe cutting in installation work.

Husqvarna K 970 Ring.

Engine Air-cooled 2 stroke engine Displacement 94 cc Power 4.8 kW Diamond blade 350 mm Cutting depth 260 mm Weight without fuel and cutting equipment 13.5 kg

198

Small and irregularly shaped openings. An excellent complement to a wall saw, to avoid overcutting at the corners. Cutting of concrete and masonry in alteration, renovation and new construction work. Cutting small openings and adjusting window and door openings.

Husqvarna K 970 Chain.

Engine Air-cooled 2 stroke engine Displacement 94 cc Power 4.8 kW Bar 350 mm Cutting depth 390 mm Weight without fuel and cutting equipment 9.4 kg

200

■

Rescue and clearing jobs: cutting in masonry, concrete and metal. Everything from buildings, roads, bridges, trains and airplanes.

Husqvarna K 970 Rescue.

Engine Air-cooled 2 stroke engine Displacement 94 cc Power 4.8 kW Blade 350 mm Cutting depth 125 mm Weight without fuel and cutting equipment 11.2 kg

202

■

Rescue and clearing jobs: cutting in masonry, concrete and metal. Everything from buildings, roads, bridges, trains and airplanes.

Husqvarna K 760 Rescue.

Engine Air-cooled 2 stroke engine Displacement 74 cc Power 3.7 kW Blade 300 mm Cutting depth 100 mm Weight without fuel and cutting equipment 9.8 kg

202

■

■ ■

■

■ ■

■ ■ ■

■

181

Handheld power cutting – range overview. APPLICATIONS

PRODUCT

TECHNICAL SPECIFICATIONS

PAGE

■

Cutting rails in maintenance work on train, tram and underground rail systems.

Husqvarna K 1260 Rail.

Engine Air-cooled 2 stroke engine Displacement 119 cc Power 5.8 kW Disc 350 / 400 mm Cutting depth 125 / 145 mm Weight with RA 10 but without fuel and cutting equipment 20.5 / 21.1 kg

204

■

Outdoors in built-up areas, when you want to avoid getting dust on buildings and cars, for instance. Indoors when it’s not possible to use water or when you want to minimise the amount of dust in sensitive locations. For quick and easy cutting and adjustment of building blocks, pipes, supports etc, on location.

Husqvarna K 3000 Vac.

Motor Electric 230 / 120 / 110 V Power 2700 / 1800 / 2200 W Diamond blade 350 mm Cutting depth with / without Vac unit 119 / 125 mm Weight incl. cable, not incl. cutting equipment and Vac unit 7.9 kg Weight, Vac unit 1.0 kg

206

Indoor and outdoor cutting. Quick and easy cutting and adjustment of building blocks, pipes, reinforcement bars, supports etc, on location. For sensitive environments where only a limited quantity of slurry is accepted.

Husqvarna K 3000 Wet.

Motor Electric 230 / 120 / 110 V Power 2700 / 1800 / 2200 W Diamond blade 350 mm Cutting depth 125 mm Weight incl. cable but without cutting equipment 7.8 kg

208

Flush cutting, i.e. cutting tight against walls and floors. Indoor use and smaller jobs where you want to avoid overcutting at the corners. Cutting pipes in pipe trenches, cutting grooves for cabling, expansion joints and crack repair.

Husqvarna K 3000 Cut-n-Break.

Motor Electric 230 / 120 / 110 V Power 2700 / 1800 / 2200 W Diamond blades 230 mm Cutting depth 400 mm Weight incl. cable and cutting equipment 10.4 kg

210

■

■ ■

■

■ ■

■

182

APPLICATIONS ■

■

■ ■

■

PRODUCT

TECHNICAL SPECIFICATIONS

PAGE

Cutting jobs in construction, engineering and shipbuilding industries. An obvious choice indoors where the ventilation is poor; and in pipe trenches, deep building foundations, shipyard docks etc.

Husqvarna K 40.

Motor Air requirement

Air 2.8 –3.5 m³ / min, 99 – 124 CFM Max air pressure 7 kp / cm², 7 bar Power 3.2 kW Diamond blade 350 mm Cutting depth 125 mm Weight without hose, mist lubricator and cutting equipment 9.8 kg

212

Cutting in all kinds of material from brick to reinforced concrete, both indoors and outdoors. Cutting small openings and adjusting window and door openings. Pipe cutting in installation jobs.

Husqvarna K 3600 MK II.

Motor Hydraulic gear motor Max pressure, flow rate 140 bar / 40 l / min Power 4.3 kW Diamond blade 350 mm Cutting depth 260 mm Weight without cutting equipment 8.3 kg

214

A pre-cutting machine for the K 3600 MK II, which gives a higher cutting speed at a lower cost. Well suited to indoor operation.

Husqvarna K 2500.

Motor Hydraulic gear motor Max pressure, flow rate 140 bar / 40 l / min Power 5.2 kW Diamond blade 400 mm Cutting depth 145 mm Weight without cutting equipment 8.3 kg

215

183

Smart solutions for efficient tools. Air Purge and a decompression valve make the machine extra easy to start.

The new generation of Active Air Filtrationâ&#x201E;˘ is one of the most efficient air filtration systems on the market, delivering operational times (for dry cutting) of up to one year, with no filter service required.

DuraStarterâ&#x201E;˘ is a patented, dust-sealed starter attachment, where the return spring and the pulley bearing are sealed. This makes the starter virtually maintenance free, giving a further boost to the reliability of our cutters.

184

SmartCarbâ&#x201E;˘ our carburettor with built-in filter compensation, adjusts the fuel-air mixture so the engine maintains maximum power even when the filters start to get clogged.

Unlike other electric cutters, the blade on the K 3000 Vac rotates forward, cutting into the material efficiently and with a minimum of strain on the operator.

The Vac attachment enables superior dust collection, making the machine unique on the market.

DC 1400 is a versatile dust collection unit for wet and dry applications. The compact design and low weight makes it easily portable and ideal for smaller jobs. Recommended with power cutters such as K 3000 Vac and K 3000 Wet using the Vac attachment.

DEX is a dust management system for wet and dry cutting, which contains several solutions. The Vac attachment on the K 3000 Vac and the DC 1400 are two solutions within this system. Most of the power cutters have a water-saving wet cutting kit, which ensures that exactly the right amount of water is used to bind the dust. This results in cleaner cutting with less water usage and slurry, compared to traditional wet cutting. The mobile battery- powered water tank WT 15 is available as an accessory, which means that you donâ&#x20AC;&#x2122;t have to pump manually.

185

A better choice for you and the environment. Our vast experience of the business helps us create cutters where fine-tuned ergonomics make the user more comfortable and efficient. With low weight, compact design and correctly positioned handles, the machine becomes easier to handle while you work. Our anti-vibration system reduces vibrations in the cutter handles, so they are more comfortable to hold and can be used for longer periods.

All models are equipped with a Poly-V belt, for better transmission of power, far longer product life and extended service intervals.

186

The X-Torq technology differs from conventional engine technology in that it uses dual intakes, one for the clean air and one for the fuel-air mixture. First, a barrier of clean air presses out the burnt gases, after which the fuel-air mixture is flushed in. In addition to increased power, results include up to 75 % reduction in emissions and a 20 % reduction in fuel consumption.

If all power cutters in the world were equipped with X-Torq engine technology: â&#x2013; â&#x2013;

Emissions

Fuel consumption

Husqvarna X-Torq engine

Power

Standard 2-stroke engine

13.500 tons less hydrocarbons would be emitted per year. 19 million litres less two-stroke fuel would be used per year.

Estimated world population of petrol power cutters 750.000 of which 50 % is estimated to have conventional two-stroke engines. X-Torq means reduction of hydrocarbons per year and machine by 36 kg resulting in reduced fuel consumption per year and machine by 51 litres.

187

Husqvarna K 760. The K 760 is a powerful machine, equipped with our latest engine technology. It’s packed with ergonomic solutions for convenient cutting, even during long periods of operation.

The Poly-V belt provides better transmission of power, less frequent re-tensioning and greatly extended product life. ■ Efficient vibration dampening system minimises vibrations (less than 5 m /s²), enabling long periods of operation without operator fatigue. ■ DEX – water-saving wet cutting kit for efficient dust management. ■ Fuel indicator in the tank shows fuel level, to help avoid unnecessary stoppages.

Applications.

■

Cutting of concrete and masonry in alteration, renovation and new construction work. ■ Cutting of smaller openings and adjustment of window and door openings. ■ Cutting of curbstones and pavers in landscaping. ■ Pipe cutting in installation work. ■ Asphalt cutting in roadworks and pre-cutting in pipe trenches. ■ Metal cutting.

Technical specifications.

■

Benefits.

The new generation of Active Air Filtration™ is one of the most efficient air filtration systems on the market, delivering operational times of up to one year, with no filter service required. ■ Engine with X-Torq produces 75% less emissions, 20 % lower fuel consumption and more power. ■ DuraStarter™, the dust-sealed starter, and the durable starter cord reduce the risk of downtime and increase reliability and product life. ■ SmartCarb™, built-in automatic filter compensation, maintains high power and lowers fuel consumption. ■ Easy to start thanks to Air Purge and decompression valve. ■

188

Engine Displacement Power Diamond blade Cutting depth Weight without fuel and cutting equipment

Air-cooled 2 stroke engine 74 cc 3.7 kW 300 / 350 mm 100 / 125 mm 9.7/ 9.9 kg

More technical specifications on page 220.

Product specifications. K 760, blade guard 300 mm, bore 25.4 mm K 760, blade guard 350 mm, bore 25.4 mm All product numbers includes wet cutting kit as standard.

966 43 32 01 966 43 34 01

Engine with X-Torq produces 75% less emissions, 20 % lower fuel consumption and more power.

Efficient vibration dampening, to less than 5 m /sÂ˛, and less noise make the machine more convenient to use.

The WT 15 and water-saving wet cutting kit deliver efficient operation with less water usage and slurry.

See page 238 216 for power cutter accessories. 189

Husqvarna K 760 with OilGuard.

OilGuard is a quality oil developed specifically for dusty environments like construction sites and is ideal for all air-cooled two-stroke engines.

The optical detection system detects if there is oil in the fuel or if the oiltype is wrong.

Applications.

Technical specifications.

Engine Displacement Power Diamond blade Cutting depth Weight without fuel and cutting equipment

■

Benefits.

Eliminates engine damage should straight fuel or if an incorrect fuel oil mix is used. ■ OilGuard oil is a quality oil developed specifically for dusty environments like construction sites. ■ OilGuard oil is ideal for all air-cooled two-stroke engines. ■ You can use standard two-stroke oil in a K 760 with OilGuard machine by deactivating the OilGuard function: simply pull out the OilGuard button by the rear handle. ■

190

Air-cooled 2 stroke engine 74 cc 3.7 kW 300 / 350 mm 100 / 125 mm 9.7/ 9.9 kg

More technical specifications on page 220.

Product specifications. K 760 with OilGuard, blade guard 350 mm, bore 25.4 mm 966 47 76 01 All product numbers includes wet cutting kit as standard.

Husqvarna KV 760. The handle on the KV 760 is easy to adjust to the ideal working posture.

Benefits.

A compact cutting trolley, developed specifically for the Husqvarna K 760. ■ The quick mounts make it easy to install the cutter on the trolley. ■ Efficient control of cutting depth facilitates adjustment and returning to the previous setting. ■ Track control means you can cut in straight or curved lines. ■ The wheels are laterally adjustable, so you can cut close to walls and curbs. ■ Easy to fold up and transport. ■ Supplied complete with 15-litres water tank. ■

The wheels are laterally adjustable so you can cut close to walls and curbs.

Product specifications. KV 760, water tank 15 litres

965 19 16 01

Diamond blades for K 760 and K 760 with Oilguard. 150 COMBI

MATERIAL

– –

GRANITE MARBLE

l l l l l

CU R E D C O NC RE T E R EINFO R C ED C O N C RE T E B R ICK RO O F T IL E AB R ASI vE M AT E RI A L A S P H A LT

Read more on page l = Optimal l = Good l = Acceptable

210

220

l l l l

– –

–

– – – –

256

254

250 COMBI

– –

l l l l

l l l l l

254

– –

280

410

420

– – – – –

l l l l

– –

–

l l l

– – – –

254

450 COMBI

– –

480

– – – – –

l l l l

l l l l l

–

l l l

257

– –

– = Not recommended

191

Husqvarna K 970. K 970 is equipped with the new generation of Active Air Filtration™, which delivers operational times up to one year without filter service, as well as a sealed starter for enhanced reliability and product life.

Applications.

Technical specifications.

Benefits.

The new generation of Active Air Filtration™ is one of the most efficient air filtration systems on the market, delivering operational times of up to one year, with no filter service required. ■ Engine with X-Torq produces 75% less emissions, 20% lower fuel consumption and more power. ■ DuraStarter™, the dust-sealed starter, and the durable starter cord reduce the risk of downtime and increase reliability and product life. ■ SmartCarb™, built-in automatic filter compensation, maintains high power and lowers fuel consumption. ■ Easy to start thanks to Air Purge and decompression valve. ■

The Poly-V belt provides better transmission of power, less frequent re-tensioning and greatly extended product life. ■ Efficient vibration dampening reduces vibrations to less than 5 m /s² (applies to the 350 and 400 mm blades), for more convenient operation. ■ DEX – water-saving wet cutting kit for efficient dust management. ■ Fuel indicator in the tank shows fuel level, to help avoid unnecessary stoppages. ■

Engine Displacement Power Diamond blade Cutting depth Weight without fuel and cutting equipment More technical specifications on page 220.

Product specifications. K 970, blade guard 350 mm, bore 25.4 mm K 970, blade guard 400 mm, bore 25.4 mm All product numbers includes wet cutting kit as standard.

See page 216 for power cutter accessories. 192

Air-cooled 2 stroke engine 94 cc 4.8 kW 300 / 350 / 400 mm 100 / 125 / 145 mm 10.6 / 11.0 / 11.8 kg

966 47 71 01 966 47 72 01

The rear handle has been redesigned with a soft insert that provides better grip for the hand and facilitates when using your hip for support. Refuelling is easier with the fuel cap moved to the right side, and vibration damping has been further improved by an adjustment of the front spring.

Husqvarna KV 970 / 1260. Benefits.

A compact cutting trolley, developed specifically for Husqvarna K 970 and K 1260. Fits also K 960. ■ The quick mounts make it easy to install the cutter on the trolley. ■ Efficient control of cutting depth facilitates adjustment and returning to the previous setting. ■ Track control means you can cut in straight or curved lines. ■ The wheels are laterally adjustable, so you can cut close to walls and curbs. ■ Easy to fold up and transport. ■ Supplied complete with 15-litres water tank. ■

DEX, the new Dust Extinguisher System that gives cleaner cutting with less water usage and slurry.

The quick mounts make it easy to install the cutter on the trolley.

Product specifications. KV 970 / 1260, water tank 15 litres

965 19 16 05

Diamond blades. MATERIAL GRANITE MARBLE CU R E D C O NC RE T E R EINFO R C ED C O N C RE T E B R ICK RO O F T IL E AB R ASI vE M AT E RI A L A S P H A LT

Read more on page l = Optimal l = Good l = Acceptable

NEW 150 COMBI

– –

l l l l l

210

220

l l l l

– –

–

– – – –

231

l l l l

– –

231

250 COMBI

– –

l l l l l

280

410

420

– – – – –

l l l l

– –

–

l l l

– – – –

231

230

l l l l

– –

230

450 COMBI

– –

l l l l l

480

HS 800

HS 810

S 1255

– – – – –

l l l l

– – l l l l

l l l l l l

228

226

–

l l l

– – – –

230

228

– –

– = Not recommended

193

Husqvarna K 1260. The K 1260 is one of the most powerful cutters on the market, with features like Active Air Filtration™, allowing up to one year’s running time without filter service, and SmartCarb™ — built-in automatic filter compensation.

Applications.

Benefits.

One of the market’s most powerful power cutters. ■ The new generation of Active Air Filtration™ is one of the most efficient air filtration systems on the market, delivering operational times of up to one year, with no filter service required. ■ SmartCarb™, built-in automatic filter compensation, maintains high power and lowers fuel consumption. ■

The Poly-V belt provides better transmission of power, less frequent re-tensioning and greatly extended product life. ■ Efficient vibration dampening reduces vibrations to less than 5 m /s² for more convenient operation. ■ DEX – water-saving wet cutting kit for efficient dust management. ■

Technical specifications. Engine Displacement Power Diamond blade Cutting depth Weight without fuel and cutting equipment More technical specifications on page 220.

Product specifications. K 1260, blade guard 400 mm, bore 25.4 mm All product numbers includes wet cutting kit as standard.

See page 216 for power cutter accessories. 194

Air-cooled 2 stroke engine 119 cc 5.8 kW 350 / 400 mm 125 / 145 mm 13.7 / 14.4 kg

966 00 35 01

The new generation of Active Air Filtration™ is one of the most efficient air filtration systems on the market, delivering operational times (for dry cutting) of up to one year, with no filter service required.

Husqvarna KV 970 / 1260. Benefits.

DEX, the new Dust Extinguisher System that gives cleaner cutting with less water usage and slurry.

The quick mounts make it easy to install the cutter on the trolley.

Product specifications. KV 970 / 1260, water tank 15 litres

Diamond blades.

NEW

MATERIAL

HS 800

GRANITE

l l l l

MARBLE CURED CONCRETE REINFORCED CONCRETE

– – – –

BRICK RO O F T IL E AB R ASI vE M AT E RI A L A S P H A LT

Read more on page l = Optimal l = Good l = Acceptable

965 19 16 05

228

HS 810

S 1255

l l l l

l l l l l l

228

226

– –

– = Not recommended

195

Husqvarna K 760 Cut-n-Break.

Twin, specially-developed 230 mm blades provide high cutting speed and power.

The Husqvarna K 760 Cut-n-Break is easy to use and maintain with very low diamond tool and maintenace cost.

DuraStarter™ reduces wear on the starter. ■ Fuel indicator in the tank shows fuel level, to help avoid unnecessary stoppages.

Applications.

■

Deep cutting up to 400 mm. For cutting pipes in pipe trenches, for cutting grooves for cabling, expansion joints and crack repair. ■ Window and door openings where you don’t want overcutting at the corners. ■ Excellent for cutting when burying signal cables.

Technical specifications.

■

Benefits.

Twin, specially-developed 230 mm blades provide high cutting speed and power. ■ The new generation of Active Air Filtration™ is one of the most efficient air filtration systems on the market, delivering operational times (for dry cutting) of up to one year, with no filter service required. ■ SmartCarb™, built-in automatic filter compensation, maintains high power and lowers fuel consumption. ■ Easy to start thanks to Air Purge and decompression valve. ■

Engine Displacement Power Diamond blades Cutting depth Weight without fuel incl. cutting equipment

When using the K 760 Cut-n-Break, water should be applied to the blades. More technical specifications on page 221.

Product specifications. K 760 Cut-n-Break, blade EL 35 CNB

966 48 19 01

Includes wet cutting kit as standard.

Accessories. Cut-n-Break tool

See page 216 for power cutter accessories. 196

Air-cooled 2 stroke engine 74 cc 3.7 kW 230 mm 400 mm 11.3 kg

544 17 80-03

The Cut-n-Break method allows you to cut in stages through walls up to 400 mm thick. 1. Each cut can be up to 65 mm deep. 2. As the cutter has twin blades, a core is formed

in the saw cut. 3. The core can easily be broken off, using the accompanying breaking tool. 4. When the core has been broken off, you continue cutting until the required depth is reached, max. 400 mm.

Diamond blades. MATERIAL STO N E CO NC RE T E, H A RD CO NC RE T E, M E DI UM CO NC RE T E, SO FT BUILDING BRICK ABRASIvE BUILDING BLOCK

Read more on page l = Optimal l = Good l = Acceptable

EL 10 CNB

EL 35 CNB

EL 70 CNB

l l l

– – –

l l l l l l

l l l

233

– – –

– = Not recommended

197

Husqvarna K 970 Ring. The Husqvarna K 970 Ring is a power cutter that is just as flexible, versatile and mobile as a standard petrol driven model.

Efficient vibration dampening reduces vibrations to less than 5 m /s², for more convenient operation. ■ Fuel indicator in the tank shows fuel level, to help avoid unnecessary stoppages.

Applications.

■

Cutting of openings in alteration, renovation and new construction work. ■ Adjustment of window and door openings. ■ Pipe cutting in installation work.

Technical specifications.

■

Benefits.

Cutting depth of 260 mm, twice the depth of a traditional blade. ■ Engine with X-Torq produces 75 % less emissions, 20 % lower fuel consumption and more power. ■ DuraStarter™, the dust-sealed starter, and the durable starter cord reduce the risk of downtime and increase reliability and product life. ■ SmartCarb™, built-in automatic filter compensation, maintains high power and lowers fuel consumption. ■ Easy to start thanks to Air Purge and decompression valve. ■ The Poly-V belt provides better transmission of power, less frequent re-tensioning and greatly extended product life. ■

Engine Displacement Power Diamond blade Cutting depth Weight without fuel and cutting equipment More technical specifications on page 221.

Product specifications. K 970 Ring Includes wet cutting kit as standard.

See page 216 for power cutter accessories. 198

Air-cooled 2 stroke engine 94 cc 4.8 kW 350 mm 260 mm 13.5 kg

966 03 79-01

By using K 970 Ring on pipe diameter up to 260 mm, the cut can be made from one position.This saves a lot of unnecessary digging which, in turn, saves time and money with less filling and finishing work.

Engine with X-Torq produces 75 % less emissions, 20 % lower fuel consumption and more power.

DuraStarter™, the dust-sealed starter, and the durable starter cord reduce the risk of downtime and increase reliability and product life.

Cutting depth of 260 mm, twice the depth of a traditional blade.

Diamond blades. MATERIAL STO N E CO NC RE T E, H A RD CO NC RE T E, M E DI UM CO NC RE T E, SO FT BUILDING BRICK

R 845

l l l l l

234

–

ABRASIvE BUILDING BLOCK

Read more on page l = Optimal l = Good l = Acceptable

R 1220

–

– = Not recommended

199

Husqvarna K 970 Chain.

Easy to start thanks to Air Purge and decompression valve. ■ Efficient vibration dampening reduces vibrations to less than 5 m /s², for more convenient operation. ■ Fuel indicator in the tank shows fuel level, to help avoid unnecessary stoppages.

Applications.

■

Small and irregularly shaped openings. ■ An excellent complement to a wall saw, to avoid overcutting at the corners. ■ Cutting of concrete and masonry in alteration, renovation and new construction work. ■ Cutting small openings and adjusting window and door openings. ■

Technical specifications. Engine Displacement Power Bar Cutting depth Weight without fuel and cutting equipment

Benefits.

Makes 390 mm deep cuts from one side. Engine with X-Torq produces 75 % less emissions, 20 % lower fuel consumption and more power. ■ DuraStarter™, the dust-sealed starter, and the durable starter cord reduce the risk of downtime and increase reliability and product life. ■ SmartCarb™, built-in automatic filter compensation, maintains high power and lowers fuel consumption. ■ ■

Air-cooled 2 stroke engine 94 cc 4.8 kW 350 mm 390 mm 9.4 kg

More technical specifications on page 221.

Product specifications. K 970 Chain

966 03 78-02

Includes wet cutting kit as standard.

Diamond chains. MATERIAL STO N E CO NC RE T E, H A RD CO NC RE T E, M E DI UM CO NC RE T E, SO FT BUILDING BRICK

ELC 45

l l l l l

236

–

ABRASIvE BUILDING BLOCK

Read more on page l = Optimal l = Good l = Acceptable

PXC 45

ELC 70

SLC 45

–

l l l l

l l l l l l

236

– = Not recommended

See page 216 for power cutter accessories. 200

– –

Makes 390 mm deep cuts from one side.

By cutting the corners first with the K 970 Chain, these cuts can be placed exactly in the correct position.

Engine with X-Torq produces 75 % less emissions, 20 % lower fuel consumption and more power.

The K 970 Chain can make openings as small as 11 Ă&#x2014;11 cm, and is perfect for openings with irregular shapes.

DuraStarterâ&#x201E;˘, the dust-sealed starter, and the durable starter cord reduce the risk of downtime and increase reliability and product life.

201

Husqvarna K 970 / K 760 Rescue.

Applications. ■

Rescue and clearing jobs: cutting in masonry, concrete and metal. Everything from buildings, roads, bridges, trains and airplanes.

Benefits.

Chromium-plated blade guard, visible in smoke and water spray, enhances control of the cutter. ■ Specially designed starter handle, with room for heavy gloves. ■ Adjustable carry strap allows full freedom of movement. ■ The new generation of Active Air Filtration™ is one of the most efficient air filtration systems on the market, delivering operational times up to one year, with no filter service required. ■ Engine with X-Torq produces 75 % less emissions, 20 % lower fuel consumption and more power. ■ DuraStarter™, the dust-sealed starter, and the durable starter cord reduce the risk of downtime and increase reliability and product life. ■ SmartCarb™, built-in automatic filter compensation, maintains high power and lowers fuel consumption. ■ Easy to start thanks to Air Purge and decompression valve. ■ The Poly-V belt provides better transmission of power, less frequent re-tensioning and greatly extended product life. ■

202

Efficient vibration dampening reduces vibrations to less than 5 m /s², for more convenient operation. ■ DEX – water-saving wet cutting kit for efficient dust management. ■ Fuel indicator in the tank shows fuel level, to help avoid unnecessary stoppages. ■

Technical specifications K 970 Rescue. Engine Displacement Power Blade Cutting depth Weight without fuel and cutting equipment

Air-cooled 2 stroke engine 94 cc 4.8 kW 350 mm 125 mm 11.2 kg

Technical specifications K 760 Rescue. Engine Displacement Power Blade Cutting depth Weight without fuel and cutting equipment

Air-cooled 2 stroke engine 74 cc 3.7 kW 300 mm 100 mm 9.8 kg

More technical specifications on page 221.

Product specifications. K 970 Rescue, blade guard 350 mm, bore 25.4 mm K 760 Rescue, blade guard 300 mm, bore 20 mm

966 47 73 01 966 47 77 01

Specially designed starter handle, with room for heavy gloves.

Adjustable carry strap allows full freedom of movement.

Chromium-plated blade guard, visible in smoke and water spray, enhances control of the cutter.

See page 216 for power cutter accessories. 203

Husqvarna K 1260 Rail. One of the market’s most powerful rail cutters.

Technical specifications.

Applications. ■

Cutting rails in maintenance work on train, tram and underground rail systems.

Benefits.

One of the market’s most powerful rail cutters. ■ Capacity for a 400 mm blade. ■ Double attachment mountings allow cutting from both directions. ■ Fast, stable mounting of the attachment onto the rail. ■ Precise right-angle cuts on all levels. ■ Starting is easy, thanks to EasyStart. ■ SmartCarb™, built-in automatic filter compensation, maintains high power and lowers fuel consumption. ■

Engine Displacement Power Disc Cutting depth Weight with RA 10 but without fuel and cutting equipment

Air-cooled 2 stroke engine 119 cc 5.8 kW 350 / 400 mm 125 / 145 mm

More technical specifications on page 221.

Product specifications. K 1260, incl. RA 10, blade guard 350 mm, bore 25.4 mm K 1260, incl. RA 10, blade guard 400 mm, bore 25.4 mm

Abrasive discs. PRODUCT NUMBER

DIAMETER, MM

BORE, MM

Read more on page

188

190

192

194

Active Air Filtration™ X-Torq SmartCarb™ DuraStarter™ EasyStart decompression valve Air Purge Poly-V belt Sealed transmission Reversible cutting arm Fuel indicator in the tank Easy-adjust blade guard Wet cutting kit DEX

220

K 760 CUT-N-BREAK

•

K 970 RING

•

K 970 CHAIN

•

K 970 RESCUE

•

K 760 RESCUE

•

K 1260 RAIL

•

119

3.7

4.8

3.7

5.8

0.33

0.35

0.51

0.43

0.38

0.28 / 0.27

11.3 (Incl. cutting equipment)

13.5

9.4

11.2

9.8

20.5 / 21.1

230

350

300

350 / 400

400

260

390

125

100

125 / 145

• • • • • • – – – • – • • –

– • • • • • • • – • – • – –

– • • • • • – – – • – • – –

• • • • • • • • • • • – – •

• – • – • – • • – – • – – •

113

116

114

113

117

101

104

103

104

101

1.9

3.4

3.9

3.7

1.9

5.0 / 5.0

2.8

4.0

4.1

4.5

2.6

4.1 / 3.6

196

198

200

202

204

221

Technical specifications electric power cutters.

K 3000 vAC

K 3000 wET

K 3000 CUT-N-BREAK

Electric motor,V

230 / 120 / 110

Power,W

2700 / 1800 / 2200

Rated current,A

12 / 15 / 20

Weight incl. cable without cutting equipment, kg

8.9 (incl.Vac attachment)

8.5

10.4 (Incl. cutting equipment)

Blade, mm

350

230

Cutting depth, mm

119 (incl.Vac attachment)

125

Elgard, overload protection “Pulling” rotation Simple blade change Replaceable arbor bushing Wet cutting kit DEX

• • • • – •

400

• • • • • •

• • • – • •

Sound power level Lwa, dB (A)

105

109

Sound pressure level, dB (A)

Vibrations front handle equivalent, m /s²

3.5

3.2

Vibrations rear handle equivalent, m /s²

3.5

3.4

Read more on page

206

208

210

Technical specifications air power cutters.

K 40

•

K 30

Air motor Air requirement, m³/ min

2.8 – 3.5

2.0 – 2.4

Max. air pressure, kp / cm², bar

Power, kW

3.2

2.3

Weight, without hose, mist lubricator and cutting equipment, kg

9.8

8.7

Blade, mm

350

300

Cutting depth, mm

125

100

Replaceable arbor bushing

• • • • •

Sound power level Lwa, dB (A)

107

106

Sound pressure level, dB (A)

Vibrations front handle equivalent, m /s²

9.5

7.2

Vibrations rear handle equivalent, m /s²

5.2

3.8

Read more on page

212

Automatic mist lubrication Reversible cutting arm Wet cutting kit DEX

222

•

• • • • •

Technical specifications hydraulic power cutters.

K 3600 MK II

•

K 2500

Hydraulic gear motor Max. pressure / flow, bar / l / min

140 / 40

Power, kW

4.3

5.2

Weight, without cutting equipment, kg

8.3

Blade, mm

350

400

Cutting depth, mm

260

145

Relplaceable arbor bushing

–

– – – • • • • •

Sound power level Lwa, dB (A)

111

107

Sound pressure level, dB (A)

Vibrations front handle equivalent, m /s²

4.3

7.5

Vibrations rear handle equivalent, m /s²

5.2

Read more on page

214

215

Peripheral drive Adjustable front handle Automatic start for water flow Blade brake Servo for rpm control Reversible cutting arm Wet cutting kit

• • • – – –

•

Integrated

223

Husqvarna offers blades for all types of cutting and all types of machines. A blade’s properties are determined by the application, the material to be cut and the machine to be used. With many years of experience in the business, we know which properties are required for each situation. Husqvarna innovations in the area of handheld cutting include our ring saws, chainsaw and Cut-n-Break tool, with cutting depths up to 400 mm. The S 1200 Diagrip™ blades are developed for professional users who want value for money as well

as good performance. The S 1200 Diagrip™ is a new series of diamond blades that enable the operator to work efficiently, even in heavily reinforced concrete. Our VN range gives a high cutting speed and a good balance between investment cost and cost per cut square metre. The R 1200 series of ring saw blades also has the Diagrip™ technology giving a ring blade with very high cutting speed, long life and a smooth cut.

Application chart – special tools. MATERIAL

RING SAw BLADES R 1220

R 845

EL 10 CNB

EL 35 CNB

EL 70 CNB

l l l l l

l l l

–

– – –

l l l l l l

l l l

234

233

STO N E CO NC RE T E, H A RD CO NC RE T E, M E DI UM CO NC RE T E, SO FT BUILDING BRICK

–

ABRASIvE BUILDING BLOCK

Read more on page l = Optimal l = Good l = Acceptable

224

BLADES FOR CUT-N-BREAK

– = Not recommended

– – –

DIAMOND TOOLS FOR HANDHELD CUTTING

Application chart.

NEW MAXI 150 PRO COMBI LASER GRANITE

MATERIAL

GRANITE MARBLE CU R E D C O NC RE T E REINFORCED CONCRETE B R ICK RO O F T IL E AB R ASI vE M AT E RI A L A S P H A LT

Read more on page l = Optimal l = Good l = Acceptable

– –

l l l l

l l l l l

– –

232

210

220

250 COMBI

l l l l

– –

l l l l

l l l l l

–

– – – –

231

– –

231

410

420

450 COMBI

– – – – –

l l l l

– –

l l l l

l l l l l

–

l l l

– – – –

231

230

– –

230

480

HS 800

HS 810

S 1255

– – – – –

l l l l

– – l l l l

l l l l l l

228

226

–

l l l

– – – –

257

230

228

– –

– = Not recommended

BLADES FOR HYDRAULIC CUTTERS

DIAMOND CHAINS

S 1235

PXC 45

ELC 45

l l l l l

226

236

–

280

–

ELC 70

SLC 45

–

l l l l

l l l l l l

236

– –

225

DiamoND blaDES for poWEr cuttErS

Husqvarna S 1200 Diagrip™ series. The blades for the new S 1200 series feature Diagrip™ as well as other technical solutions that enable the operator to work efficiently in all kinds of materials. Easy operation even in heavily reinforced concrete. ■ Higher cutting speeds. ■ Stable cutting without vibrations. ■ The S 1235 has the innovative three-segments-in-one design, which gives the highest cutting speed due to the efficient cooling effect of the segments. ■ The S 1255 offers superior speed and life in heavily reinforced concrete applications. ■

S 1255

NEW

GRANITE MARBLE CURED CoNCRETE REINFoRCED CoNCRETE BRICK Ro o F T IL E

D U C T I LE I Ro N

226

S 1255

l l l l l l

– – –

AB R AS Iv E M AT E RIA L A S p h A LT l = Optimal l = Good l = Acceptable

S 1235

– = Not recommended

– – –

Diagripâ&#x201E;˘ ensures an optimal distribution of the diamonds and holds them in the segment longer. The result is blades with superior cutting capacity, longer life and a smooth, rapid cut.

PRODUCT NUMBER S 1235

DIAMETER, MM

BLADE GEOMETRY

SEGMENT SHAPE

SEGMENT HEIGHT, MM

NUMBER OF SEGMENTS

BORE, MM

576 12 98-01

416

Segmented

Double notch

10 + 2

25.4

416

Segmented

Single notch

10 + 2

25.4

S 1255

579 53 08-01

227

DIAMOND BLADES FOR POWER CUTTERS

Husqvarna HS 800 Series. HIGH SPEED AND CUTTING OF HARD MATERIALS

The ultimate performance blades specifically designed for the professional using 2-stroke and hydraulic handheld saws. HUSQVARNA HS 800

For sawing of extremely hard reinforced concrete such as pre-stressed panels, tilt up panels, concrete pipes and extremely hard clay brick and granite. Can be used on K 2500. HUSQVARNA HS 810

Best life /speed ratio of performance for hard reinforced concrete and general concrete cutting applications.

HUSQVARNA HS 800 PRODUCT NUMBER

DIAMETER, MM

BORE, MM

WATER SLOTS

SEGMENT LENGTH, MM SEGMENT WIDTH, MM

SEGMENT HEIGHT, MM

5 2 5 3 5 51 92 5 2 5 3 5 51 90

360 417

25.4 25.4

Narrow Narrow

40 40

10 12

3.2 3.2

HUSQVARNA HS 810 PRODUCT NUMBER

DIAMETER, MM

BORE, MM

WATER SLOTS

SEGMENT LENGTH, MM SEGMENT WIDTH, MM

SEGMENT HEIGHT, MM

5 2 5 3 5 51 31 5 2 5 3 5 51 30

417 360

25.4 25.4

Narrow Narrow

40 40

12 12

2.8 3.2

Application chart. MATERIAL

HS 800

GRANITE

l l l l

MARBLE CURED CONCRETE REINFORCED CONCRETE

– – – –

BRICK RO O F T IL E AB R ASI vE M AT E RI A L A S P H A LT

Read more on page l = Optimal l = Good l = Acceptable

228

254

– = Not recommended

HS 810

– –

l l l l

– –

257

DiamonD blaDes for power cutters

Husqvarna p 800 series. Husqvarna has developed a range of Pre-cut diamond blades for use on Husqvarna 2-stroke power cutters or the Husqvarna K 2500 hydraulic saw. These blades are 4.2 mm wide, the same as the ring blade. These blades are used to Pre-cut all materials to a depth of 145 mm prior to deepening with the Husqvarna K 3600 or K 970 Ring saw – providing the most cost effective solution. Husqvarna has now developed a 5.6 mm wide Pre-cut blade to be used with the same dimension ring blade. These blades are used to Pre-cut prior to using the K 970 Chain saw. HUSQVARNA P 800

The ultimate performance blades specifically designed for the Husqvarna K 2500 and other hydraulic hand held power cutters. For sawing of extremely hard reinforced concrete such as pre-stressed panels, tilt up panels, concrete pipes and extremely hard clay brick and granite. HUSQVARNA P 810

Best life /speed ratio of performance for hard reinforced concrete and general concrete cutting applications.

HUSQVARNA P 800 PRODUCT NUMBER

DIAMETER, MM

BORE

SEGMENT LENGTH, MM

SEGMENT WIDTH, MM

SEGMENT HEIGHT, MM

5 2 5 3 5 51 85 5 2 5 3 5 51 88

417 417

25.4 25.4

40 40

4.2 5.6

12 12

HUSQVARNA P 810 PRODUCT NUMBER

DIAMETER, MM

BORE

SEGMENT LENGTH, MM

SEGMENT WIDTH, MM

SEGMENT HEIGHT, MM

5 2 5 3 5 51 86

417

25.4

4.2

application chart. MATERIAL

P 800

GRANITE

l l l l

MARBLE CURED CoNCRETE REINFoRCED CoNCRETE

– – – –

BRICK Ro o F T IL E AB R As Iv E M AT E RIA L A s P h A LT

Read more on page l = Optimal l = Good l = Acceptable

254

P 810

– –

l l l l

– –

257

– = Not recommended

229

DiamonD blaDes for power cutters

Husqvarna 400 T 15 Series. A diamond tool for the professional. Full 15 mm diamond height for ultimate life and a unique turbo style segment for extreme speed of cut in the most demanding applications on a full range of medium to high powered machines. Husqvarna 420 T15 ■ Husqvarna 450 T15 ■

HUSQVARNA 420 T15 PRODUCT NUMBER

DIAMETER, MM

BORE

WATER SLOTS

SEGMENT LENGTH, MM SEGMENT WIDTH, MM

SEGMENT HEIGHT, MM

5 2 5 3 6 30 01 5 2 5 3 6 31 01

355 415

25.4 25.4

Narrow Narrow

40 40

15 15

3.2 3.2

Other dimensions available on request. HUSQVARNA 450 T15 PRODUCT NUMBER

DIAMETER, MM

BORE

WATER SLOTS

SEGMENT LENGTH, MM SEGMENT WIDTH, MM

SEGMENT HEIGHT, MM

5 2 5 3 6 43 01 5 2 5 3 6 44 01

355 415

25.4 25.4

Narrow Narrow

40 40

15 15

3.2 3.2

Other dimensions available on request.

Husqvarna 400 Series. The ultimate performance blade for hand held power cutters. An extremely high performing product for contractors, rental companies and general trades where cost per cut is the prime consideration. 300 – 415 mm diameter available, available bonds: Husqvarna 410 ■ Husqvarna 420 ■ Husqvarna 450 Combi ■ Husqvarna 480 ■

HUSQVARNA 410 PRODUCT NUMBER HUSQVARNA 410

DIAMETER, MM

BORE

WATER SLOTS

SEGMENT LENGTH, MM SEGMENT WIDTH, MM

SEGMENT HEIGHT, MM

5 2 5 3 6 21 01 NUMBER PRODUCT

305 DIAMETER, MM 25.4 BORE 355 25.4 415 25.4

Narrow WATER SLOTS Narrow Narrow

40 SEGMENT LENGTH, MM 3.2 SEGMENT WIDTH, MM 40 3.2 40 3.2

10 SEGMENT HEIGHT, MM 10 10

5 2 5 3 6 22 01 5 2 5 3 6 23 01

HUSQVARNA 420 PRODUCT NUMBER

DIAMETER, MM

BORE

WATER SLOTS

SEGMENT LENGTH, MM SEGMENT WIDTH, MM

SEGMENT HEIGHT, MM

5 2 5 3 6 26 01 5 2 5 3 6 27 01 5 2 5 3 6 28 01

305 355 415

25.4 25.4 25.4

Narrow Narrow Narrow

40 40 40

10 10 10

3.2 3.2 3.2

HUSQVARNA 450 COMBI PRODUCT NUMBER

DIAMETER, MM

BORE

WATER SLOTS

SEGMENT LENGTH, MM SEGMENT WIDTH, MM

SEGMENT HEIGHT, MM

5 2 5 3 6 32 01 5 2 5 3 6 34 01 5 2 5 3 6 37 01

305 355 415

25.4 25.4 25.4

Narrow Narrow Narrow

40 40 40

10 10 10

3.2 3.2 3.2

HUSQVARNA 480 PRODUCT NUMBER

DIAMETER, MM

BORE

WATER SLOTS

SEGMENT LENGTH, MM SEGMENT WIDTH, MM

SEGMENT HEIGHT, MM

5 2 5 3 6 45 01 5 2 5 3 6 46 01 5 2 5 3 6 48 01

305 355 415

25.4 25.4 25.4

Narrow Narrow Narrow

40 40 40

10 10 10

230

3.2 3.2 3.2

DIAMOND BLADES FOR POWER CUTTERS

Husqvarna 200 Series. For extreme performance on handheld power cutters. 300 – 415 mm diameter available. Husqvarna 210 ■ Husqvarna 220 ■ Husqvarna 250 Combi ■ Husqvarna 280 ■

HUSQVARNA 210 PRODUCT NUMBER

DIAMETER, MM

BORE

WATER SLOTS

SEGMENT LENGTH, MM SEGMENT WIDTH, MM

SEGMENT HEIGHT, MM

5 2 5 3 6 10 01 5 2 5 3 6 11 01 5 2 5 3 6 12 01

305 355 415

25.4 25.4 25.4

Narrow Narrow Narrow

40 40 40

8 8 8

3.2 3.2 3.2

HUSQVARNA 220 PRODUCT NUMBER

DIAMETER, MM

BORE

WATER SLOTS

SEGMENT LENGTH, MM SEGMENT WIDTH, MM

SEGMENT HEIGHT, MM

5 2 5 3 6 13 01 5 2 5 3 6 14 01 5 2 5 3 6 15 01

305 355 415

25.4 25.4 25.4

Narrow Narrow Narrow

40 40 40

8 8 8

3.2 3.2 3.2

HUSQVARNA 250 COMBI PRODUCT NUMBER

DIAMETER, MM

BORE

WATER SLOTS

SEGMENT LENGTH, MM SEGMENT WIDTH, MM

SEGMENT HEIGHT, MM

5 2 5 3 6 16 01 5 2 5 3 6 17 01 5 2 5 3 6 18 01

305 355 415

25.4 25.4 25.4

Narrow Narrow Narrow

40 40 40

8 8 8

3.2 3.2 3.2

HUSQVARNA 280 PRODUCT NUMBER

DIAMETER, MM

BORE

WATER SLOTS

SEGMENT LENGTH, MM SEGMENT WIDTH, MM

SEGMENT HEIGHT, MM

5 2 5 3 6 19 01 5 2 5 3 6 46 01 5 2 5 3 6 48 01

305 355 415

25.4 25.4 25.4

Narrow Narrow Narrow

40 40 40

8 8 8

3.2 3.2 3.2

Husqvarna 100 Series. Economical quality for the occasional user. Suits a broad range of materials on low horse power hand held saws. 300 – 415 mm diameter available. ■

Husqvarna 150 Combi

HUSQVARNA 150 COMBI PRODUCT NUMBER

DIAMETER, MM

BORE

WATER SLOTS

SEGMENT LENGTH, MM SEGMENT WIDTH, MM

SEGMENT HEIGHT, MM

5 2 5 3 6 04 01 5 2 5 3 6 05 01 5 2 5 3 6 06 01

305 355 415

25.4 25.4 25.4

Narrow Narrow Narrow

40 40 40

7 7 7

3.2 3.2 3.2

231

DIAMOND BLADES FOR POWER CUTTERS

Husqvarna Maxipro Laser Granite Series.

HUSQVARNA MAXIPRO LASER STONE

Wet For longer life on all granites. Smooth cutting for minimal chipping in granite and most marbles. Individual segments are laser welded to the saw blank to provide ultimate weld strength. This blade is to be used on the K 3000 Electric.

HUSQVARNA MAXIPRO LASER STONE PRODUCT NUMBER

DIAMETER, MM

BORE

BLADE GEOMETRY

SEGMENT LENGTH, MM SEGMENT WIDTH, MM

SEGMENT HEIGHT, MM

5 2 5 3 5 50 36

350

25.4

Segmented

3.2

Application chart. MAXI PRO 150 LASER COMBI GRANITE

MATERIAL

GRANITE MARBLE CU R E D C O NC RE T E REINFORCED CONCRETE B R ICK RO O F T IL E A S P H A LT

Read more on page l = Optimal l = Good l = Acceptable

232

– = Not recommended

220

250 COMBI

l l l l

– –

l l l l

l l l l l

254

– –

l l l l

l l l l l

–

– – – –

256

254

– –

AB R ASI vE M AT E RI A L

210

– –

280

410

420

450 COMBI

– – – – –

l l l l

– –

l l l l

l l l l l

–

l l l

257

–

l l l

– – – –

254

– –

480

– – – – –

DIAMOND BLADES FOR CUT-N-BREAK CUTTERS

Husqvarna EL 10 CNB / EL 35 CNB / EL 70 CNB. UNIQUE CUTTING DEPTH AND LOW TOOL COST

Cut in stages through walls up to 400 mm thick, with a very low diamond tool investment. ■ U-shaped segments on concrete blades EL 10 CNB and EL 35 CNB to promote efficient cooling and disposal of saw slurry. ■ The self sharpen segments are designed to give a free-cutting tool regardless of direction of blade rotation. ■ Pulley incorporated into the blade. ■ Highest quality blade components due to tough application and extreme cutting depth. ■

Twin blades. Especially-developed blades provide high cutting speed and power.

MATERIAL

EL 10 CNB

EL 35 CNB

EL 70 CNB

l l l

l l l l l l

l l l

STO N E CO NC RE T E, H A RD CO NC RE T E, M E DI UM

– – –

CO NC RE T E, SO FT BUILDING BRICK ABRASIvE BUILDING BLOCK l = Optimal l = Good l = Acceptable

– = Not recommended

– – –

PRODUCT NUMBER EL 10 CNB

SEGMENT LENGTH, MM

SEGMENT wIDTH, MM

SEGMENT HEIGHT, MM

NUMBER OF BLADES

574 83 62-01

2.4

8.5

2.4

8.5

2.4

8.5

EL 35 CNB

574 83 62-02 EL 70 CNB

574 83 62-03

Each product number includes one set of blades = two blades.

233

DIAMOND BLADES FOR RING CUTTERS

Husqvarna R 1220 Diagrip™. PREMIUM RING BLADES WITH THE REVOLUTIONARY DIAGRIP™ TECHNOLOGY

Diagrip™ technology which yields superior cutting capacity, longer life and a smooth rapid cut. ■ Longer segment to give a better stability to the ring. Making it more solid and stiff which helps to cut a straight cut. ■ The design of the segments improves cooling and slurry transportation, effecting both speed and life in a positive way. ■ The self sharpen segments are designed to give a free-cutting tool regardless of direction of blade rotation. ■ CE-certification applies only when using Husqvarna ring blades and drive disc together with Husqvarna ring saw. ■ All ring saw blades are supplied with a patented drive disc. ■

Diagrip™ ensures an optimal distribution of the diamonds and holds them in the segment longer, ensuring blades with superior cutting capacity, longer life and a smooth, rapid cut.

MATERIAL

R 1200 DIAGRIP™ SERIES

STO N E CO NC RE T E, H A RD CO NC RE T E, M E DI UM CO NC RE T E, SO FT BUILDING BRICK

234

R 1220

R 845

l l l l l

–

ABRASIvE BUILDING BLOCK l = Optimal l = Good l = Acceptable

The design of the R 1200 segments promotes the efficient cooling of the segments and steel core, and helps to dispose of the abrasive saw slurry.

– = Not recommended

–

Husqvarna R 845. HIGH PERFORMANCE WITH GOOD CUTTING SPEED

The self sharpen segments are designed to give a free-cutting tool regardless of direction of blade rotation. ■ An excellent complement to the R 1200 series. ■ CE-certification applies only when using Husqvarna ring blades and drive disc together with Husqvarna ring saw. ■ All ring saw blades are supplied with a patented drive disc. ■

Husqvarna Pre-cut ring blade. PRE-CUT BLADE FOR ALL TYPES OF CONSTRUCTION MATERIAL

Cuts all standard types of construction material. ■ 5.6 mm wide ring saw blade that could be used before another machine, such as the Husqvarna K 970 Chain. ■ The self sharpen segments are designed to give a free-cutting tool regardless of direction of blade rotation. ■ CE-certification applies only when using Husqvarna ring blades and drive disc together with Husqvarna ring saw. ■ All Ring saw blades are supplied with a patented drive disc. ■

PRODUCT nUmbeR

DIAmeTeR, mm

SeGmenT LenGTh, mm

SeGmenT wIDTh, mm

SeGmenT heIGhT, mm

365

4.2

365

4.2

R 1220

574 47 87-01 R 845

574 83 63-02

235

DIAMOND CHAINS

Husqvarna PXC 45. PREMIUM ALL-ROUND CHAIN FOR AGGREGATE CONCRETE

High performance in combination with a very wide application area. ■ Quick start segment design, smooth and quick start at first cut. ■ Double bumper segment support for smooth cutting performance. ■ All chains are supplied with a nine-toothed driving wheel. ■

Husqvarna ELC 45 / ELC 70. HIGH PERFORMANCE WITH GOOD CUTTING SPEED

Double bumper segment support for smooth cutting performance and quick start. ■ All chains are supplied with a nine-toothed driving wheel. ■

Husqvarna SLC 45. ALL-ROUND CHAIN FOR AGGREGATE CONCRETE

Chainsawing is an excellent complement to avoid overcutting in cornes where bigger blades have been used and to cut small and irregular openings. Husqvarna has an assortment of chains and accessories for sawing in reinforced concrete and other construction materials in different hardness.

Quick start segment design, smooth and quick start at first cut. ■ Offers good balance between investment cost and cost per cut square metre. ■ Double bumper segment support for smooth cutting performance. ■ All chains are supplied with a nine-toothed driving wheel. ■

Our ring blade range offers a 5.6 mm wide pre-cut ring blade that could be used before cutting with a chainsaw, see page 259.

Accessories for diamond chains. PRODUCT NUMBER

DESCRIPTION

531 10 11-94 531 10 11-95 506 34 62-14

Repair kit for chain segments Repair kit for chain links Bar 350 mm / 15"

MATERIAL STO N E CO NC RE T E, H A RD CO NC RE T E, M E DI UM CO NC RE T E, SO FT BUILDING BRICK

ELC 45

l l l l l

–

ABRASIvE BUILDING BLOCK l = Optimal l = Good l = Acceptable

PXC 45

–

ELC 70

SLC 45

l l l l

l l l l l l

– –

– = Not recommended

PRODUCT NUMBER PXC 45

SEGMENT LENGTH, MM

SEGMENT wIDTH, MM

SEGMENT HEIGHT, MM

531 10 11-85

5.7

13.7

5.7

13.7

5.7

13.7

5.7

ELC 45

531 10 11-87 ELC 70

531 10 11-86 SLC 70

531 10 11-84

236

RESCUE BLADES

HUSQVARNA UNIVERSAL DBT RING BLADE

HUSQVARNA UNIVERSAL DBT BLADE

Sheet

Metal Vehicle Chassis Sheet Roofing Concrete Cast Iron

Metal Reinforcement ■ Vehicle Panels ■ Metal Roller Doors ■ Wooden Structures ■ Masonry ■ 260 mm cutting depth ■

Metal Reinforcement ■ Vehicle Panels ■ Metal Roller Doors ■ Wooden Structures ■ Masonry ■ 125 mm cutting depth (355 mm) ■

Sheet

Metal Vehicle Chassis Sheet Roofing Concrete Steel Bars

HUSQVARNA WIDE TOOTHED BLADE ■ Vehicle Panels Metal Roller Doors ■ Sheet Roofing Wooden Frames ■ 125 mm cutting depth (355 mm)

HUSQVARNA METAL ABRASIVE BLADE ■ Metal Reinforcement Sheet Metal ■ Vehicle Panels Steel Bars ■ Metal Locks Railway Track ■ 125 mm cutting depth (355 mm)

HUSQVARNA DIAMOND BLADE ■ Reinforced Concrete Brick ■ Natural Stone ■ 125 mm cutting depth (355 mm)

HUSQVARNA FINE TOOTHED BLADE Vehicle Panels ■ Metal Roller Doors ■ Wooden Frames ■ Stainless Steel Railway Carriages ■ 125 mm cutting depth (355 mm) ■

Vehicle Chassis Sheet Roofing Aircraft Alloys

ABRASIVE DISCS FOR STONE AND METAL

Husqvarna abrasive discs. Top-grade abrasive discs, developed specifically for use with handheld power cutters. ■ Can cut practically any material. A good choice for use on steel and other metals. ■

PRODUCT NUMBER

DIAMETER, MM

BORE, MM

MATERIAL

504 00 08-03 504 00 10-03

350 400

25.4 25.4

Railway rail Railway rail

237

Our diamond tools for angle grinders have been developed on the basis of our long experience, which is characterised by continual innovation and improvement. The range for angle grinders consist of two performance levels and you can choose from a variety of both multipurpose and specialised blades. They are suitable for all types of angle grinding jobs, from tiles to metal and reinforced concrete, and include blade diameters from 115 to 350 mm.

238

The Husqvarna grinding cup wheels are supplied in all required grit sizes for a wide application range. The range of quality abrasive discs offers high performance cutting, to meet any need you might have.

DIAMOND TOOLS FOR ANGLE GRINDERS

239

DIAMOND tOOls fOr ANgle grINDers

HUSQVARNA MAXIPRO WAVE TURBO ABRASIVE

Wet / dry (105–230 mm)

As per Maxi Wave Turbo, but with a special harder bond to minimise wear in abrasive materials.

HUSQVARNA MAXIPRO WAVE TURBO ABRASIVE PRODUCT NUMBER

DIAMETER, MM

BORE

BLADE GEOMETRY

SEGMENT LENGTH, MM SEGMENT WIDTH, MM

SEGMENT HEIGHT, MM

5 2 5 3 5 50 50

230

25.4

Wave Turbo Abrasive

–

2.6

* Larger diamaters avaialble on request.

HUSQVARNA MAXIPRO GRANITE THIN TURBO

Wet above 150 mm diameter (105–250 mm)

For rapid, precise cutting of all granites, marbles and other hard non-abrasive stones or construction materials. A thinner version of the traditional turbo blade but with a flat blank. This blade is the ultimate blade for the professional stone mason.

HUSQVARNA MAXIPRO GRANITE THIN TURBO PRODUCT NUMBER

DIAMETER, MM

BORE

BLADE GEOMETRY

SEGMENT WIDTH, MM

SEGMENT LENGTH, MM

5 2 5 3 5 50 61

230

25.4

Thin Turbo

–

2.6

HUSQVARNA MAXIPRO LASER ABRASIVE

Wet / dry (125–230 mm)

For very abrasive materials such as sandstone, limestone and ashphalt. Individual segments are laser welded to the saw blank to provide ultimate weld strength.

HUSQVARNA MAXIPRO LASER ABRASIVE PRODUCT NUMBER

DIAMETER, MM

BORE

BLADE GEOMETRY

SEGMENT LENGTH, MM SEGMENT WIDTH, MM

SEGMENT HEIGHT, MM

5 2 5 3 5 50 19 5 2 5 3 5 50 23

125 230

22.2 25.4

Segmented Segmented

32 38

10 10

2.0 2.6

HUSQVARNA MAXIPRO CHASER GENERAL PURPOSE

Wet / dry (125 mm) Special undercut protection to this turbo style blade provides ultimate blank protection from under-cutting, particularly when making chases in walls and floors for insertion of pipes and electrical ducts.

HUSQVARNA MAXIPRO CHASER GENERAL PURPOSE PRODUCT NUMBER

DIAMETER, MM

BORE

BLADE GEOMETRY

SEGMENT LENGTH, MM SEGMENT WIDTH, MM

SEGMENT HEIGHT, MM

5 2 5 3 5 50 03

125

22.2

Chaser

–

240

2.15

DIAMOND TOOLS FOR ANGLE GRINDERS

HUSQVARNA TUCK POINT

Wet / dry (105 – 180 mm)

These 6 mm wide abrasive bonds are designed for removing the mortar between courses of brick or block reparation work.

HUSQVARNA MAXIPRO TUCK POINT PRODUCT NUMBER

DIAMETER, MM

BORE

BLADE GEOMETRY

SEGMENT LENGTH, MM SEGMENT WIDTH, MM

SEGMENT HEIGHT, MM

5 3 1 2 1 16 78 5 3 1 2 1 16 79

105 180

22.2 25.4

Segmented Segmented

10 10

6 6

HUSQVARNA MAXIPRO TAW

Wet / dry (105–230 mm)

For aggressive removal of all concrete and masonry products. Providing long life and a semi-smooth finish.

HUSQVARNA MAXIPRO TAW PRODUCT NUMBER

DIAMETER, MM

BORE

SEGMENTS

SEGMENT LENGTH, MM SEGMENT WIDTH, MM

SEGMENT HEIGHT MM

5 2 5 3 58 3 0 1 5 2 5 3 58 4 0 1 5 2 5 3 58 5 0 1 5 2 5 3 58 6 0 1

105 125 180 230

25.4 25.4 25.4 25.4

TAW – Course TAW – Course TAW – Course TAW – Course

24 24 24 24

5 5 5 5

MAXIPRO BLADES

Continuous Rim Laser Stone Laser General Purpose Laser Abrasive Wave Turbo Wave Turbo Abrasive Mr Tile Granite Thin Turbo Electroplated Chaser General Purpose Chaser Abrasive Tuck Point Double Row Segmented Turbo• TAW

• • + + + • + + + +

+ + + • + + • • + • + + + + + • • + • • • + + +

+ + • + + + •

+ • • •

• • + • + • • + + + +

8 8 8 8

+ • • + +

+ • + + + • + + • + + • + • • + • • + + + + + • • • + + + • + + + + • •

• + + • + • • +

+ • + + + • • + + • + • • • + + + • • • + + +

•

• + + •

+ Highly recommended for this material • Suitable for this material (Background colour corresponds to blade decal) * Maxipro Turbo Cupwheels – available in Course , Medium and Fine grit.

241

DIAMOND BLADES FOR ANGLE GRINDERS

Husqvarna Mizer Diamond Blades. Premium quality blades which have been developed for situations where cost is a principal consideration and hassle free working is essential. MIZER CONTINUOUS RIM

Wet above 150 mm diameter (105–250 mm)

A non-interrupted continuous rim provides the best solution where a perfect chip-free edge is required. 7 mm segment height boosts blade life. HUSQVARNA MIZER CONTINUOUS RIM PRODUCT NUMBER

DIAMETER, MM

BORE

BLADE GEOMETRY

SEGMENT LENGTH, MM SEGMENT WIDTH, MM

SEGMENT HEIGHT, MM

5 2 5 3 5 50 66 5 2 5 3 5 50 67 5 2 5 3 5 50 68 5 2 5 3 5 50 69 5 2 5 3 5 50 70 5 2 5 3 5 50 71 5 2 5 3 5 50 72 5 2 5 3 5 50 73

105 115 125 150 180 200 230 250

25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4

Continuous Rim Continuous Rim Continuous Rim Continuous Rim Continuous Rim Continuous Rim Continuous Rim Continuous Rim

– – – – – – – –

7 7 7 7 7 7 7 7

1.7 1.7 1.7 1.7 1.7 1.7 1.8 1.8

HUSQVARNA MIZER WAVE TURBO

Wet / dry (105–250 mm)

Fluted continuous rim incorporating wave design in blank for maximum cooling capacity.

HUSQVARNA MIZER WAVE TURBO PRODUCT NUMBER

DIAMETER, MM

BORE

BLADE GEOMETRY

SEGMENT LENGTH, MM SEGMENT WIDTH, MM

SEGMENT HEIGHT, MM

5 2 5 3 6 56 01 5 2 5 3 5 50 74 5 2 5 3 6 57 01 5 2 5 3 6 58 01 5 2 5 3 5 50 75 5 2 5 3 5 50 76 5 2 5 3 5 50 77 5 2 5 3 5 50 78

105 115 125 150 180 200 230 250

22.2 22.2 22.2 25.4 25.4 25.4 25.4 25.4

Wave Turbo Wave Turbo Wave Turbo Wave Turbo Wave Turbo Wave Turbo Wave Turbo Wave Turbo

– – – – – – – –

9 9 9 9 9 9 9 9

2.2 2.2 2.2 2.4 2.4 2.6 2.6 3.2

HUSQVARNA MIZER SEGMENTED

Wet / dry (105–230 mm)

For economical general purpose cutting of a wide variety of construction materials.

HUSQVARNA MIZER SEGMENTED PRODUCT NUMBER

DIAMETER, MM

BORE

BLADE GEOMETRY

SEGMENT LENGTH, MM SEGMENT WIDTH, MM

SEGMENT HEIGHT, MM

5 2 5 3 6 59 01 5 2 5 3 5 50 88 5 2 5 3 6 60 01 5 2 5 3 6 61 01 5 2 5 3 5 50 89 5 2 5 3 5 50 90 5 2 5 3 6 62 01

105 115 125 150 180 200 230

22.2 22.2 22.2 25.4 25.4 25.4 25.4

Segmented Segmented Segmented Segmented Segmented Segmented Segmented

– – – – – – –

8 8 8 8 8 8 8

242

2.0 2.0 2.0 2.0 2.1 2.1 2.4

CUP WHEELS FOR ANGLE GRINDERS

Husqvarna Mizer Cup Wheels. HUSQVARNA MIZER DOUBLE ROW SEGMENTED

Wet / dry (105 – 180 mm)

For the cost conscious tradesperson who needs a speedy removal rate on general concrete and masonry products.

HUSQVARNA MIZER DOUBLE ROW SEGMENTED PRODUCT NUMBER

DIAMETER, MM

BORE

SEGMENTS

SEGMENT LENGTH, MM SEGMENT WIDTH, MM

SEGMENT HEIGHT MM

5 2 5 3 6 66 01 5 2 5 3 6 67 01 5 2 5 3 6 68 01

105 125 180

22.2 25.4 25.4

Double Double Double

20 / 30 20 / 30 20 / 30

5 5 5

8 8 8

HUSQVARNA MIZER TURBO

Wet / dry (105 – 180 mm)

For the cost conscious tradesperson who needs fast removal but extra life when grinding concrete, masonry and stone products.

HUSQVARNA MIZER TURBO PRODUCT NUMBER

DIAMETER, MM

BORE

SEGMENTS

SEGMENT LENGTH, MM SEGMENT WIDTH, MM

SEGMENT HEIGHT MM

5 2 5 3 6 63 01 5 2 5 3 6 64 01 5 2 5 3 6 65 01

105 125 180

25.4 25.4 25.4

Wave Wave Wave

20 20 20

5 5 5

MIZER BLADES

Continuous Rim Wave Turbo Segmented MIZER CUPWHEELS

Double Row Segmented Turbo

• + + + • + + + •

8 8 8

+ + + • • + + + • + • • + • + + + + + • • + + + + • + + • • • • + +

+ + + • • • + Highly recommended for this material

• +

• • + +

+ • • • + +

+ • • +

• Suitable for this material (Background colour corresponds to blade decal)

243

244

MASONRY ANd TILE SAWING

Range overview

246

Husqvarna masonry saws

248

Husqvarna tile saws

252

Technical specifications for masonry saws

254

Technical specifications for tile saws

256

Diamond blades for masonry and tile sawing

258

For people who work with stone, brick, large tiles or blocks, it goes without saying that precision is crucial to the end result. But the efficiency of the machine should never compromise the need for good ergonomics and a reasonable workload. Husqvarna’s table saws are easy to use whether you’re cutting large or small tiles and if you’re standing on the ground or cutting tiles up on a roof. For us it’s just as important that the material you’re cutting and the machine you’re using are perfectly matched.

245

Masonry and tile sawing – range overview. APPLICATIONS ■

All kinds of bricks and blocks.

PRODUCT

TECHNICAL SPECIFICATIONS

PAGE

Husqvarna TS 400 F.

Power 1500 / 2200 / 2700 W Diamond blade, max 400 mm Cutting depth, max 125 / 230 * mm Weight 96 kg

248

* By reversing the material.

■

All kinds of bricks and blocks.

Husqvarna TS 350 E.

Power 1500 / 2200 / 2700 W Diamond blade, max 350 (300) mm Cutting depth, max 100 (80) mm Weight 92 kg

249

■

All kinds of bricks and blocks.

Husqvarna TS 300 E.

Power Diamond blade, max Cutting depth, max Weight

250

246

2200 / 2700 W 300 (350) mm 80 (100) mm 82 kg

APPLICATIONS ■

All larger tiling materials.

PRODUCT

TECHNICAL SPECIFICATIONS

PAGE

Husqvarna TS 73 R.

Power Diamond blade, max Cutting depth, max Weight

1000 W 230 mm 50 / 100 * mm 47 kg

252

800 W 200 mm 40 mm 41 kg

253

* By reversing the material.

■

Tile cutting.

Husqvarna TS 66 R.

Power Diamond blade, max Cutting depth, max Weight

247

Husqvarna TS 400 F. Applications. ■

All kinds of bricks and blocks.

Benefits.

Patented self-locking blade nut (no wrench required) and full-access blade guard. ■ One person can easily set up the machine, thanks to the semi-automatic folding legs. ■ Laser guide for quick positioning of material. ■ Easy transport and handling – even in vans – thanks to the 4 wheels. ■ Slurry collection tray for longer pump use. ■

Technical specifications. Power Diamond blade, max Cutting depth, max Weight

2200 W 400 mm 125 / 230 * mm 96 kg

More technical specifications on page 254. * By reversing the material.

Product specifications. TS 400 F, 230 V, 1-phase, blade GS 50 S + 400 mm

965 14 81-06

Accessories. Extra blade guard kit, complete blade coverage A Quick disconnect flange

543 07 82-44 543 04 33-57

Spare parts. Water pump Quick connection flange Table, complete Roller for table Angular cutting guide Plug for tank Wrench 13 Wrench 30

Quick disconnect flange, for easy installation of the blade.

577 32 69-02 543 04 33-57 540 06 50-01 543 04 63-00 543 04 61-46 543 04 60-51 543 04 58-91 543 04 59-00

Tiltable head for angle cutting.

The laser pointer enables easier positioning.

diamond blades. MATERIAL

150 COMBI

– –

GRANITE MARBLE

l l l l l

CU R E D C O NC RE T E REINFORCED CONCRETE B R ICK RO O F T IL E AB R ASI vE M AT E RI A L A S P H A LT

Read more on page l = Optimal l = Good l = Acceptable

248

– = Not recommended

210

220

250 COMBI

l l l l

– –

l l l l

l l l l l

254

–

– – – –

256

254

– –

280

410

420

450 COMBI

– – – – –

l l l l

– –

l l l l

l l l l l

–

l l l

257

–

l l l

– – – –

254

– –

480

– – – – –

Husqvarna TS 350 E. Applications. ■

All kinds of bricks and blocks.

Benefits.

Two rear wheels make for easy transport on floors. ■ One person can easily set up the machine, thanks to the semi-automatic foldable legs. ■ The quick disconnect system makes the water pump easy to replace. ■ Very sturdy and rigid frame with protected guide rails. ■ Can plunge or cut at 45° for maximum versatility. ■

Technical specifications. Power Diamond blade, max Cutting depth, max Weight

2200 W 350 (300) mm 100 (80) mm 92 kg

More technical specifications on page 254.

Product specifications. TS 350 E, 230 V, 1-phase, blade GS 50 S + 350 mm

965 14 80-09

Accessories.

The foldable legs allows one person alone to set up the machine.

D Slurry collector tray

543 04 33-41 543 04 14-39

Extra blade guard kit, complete blade coverage

Spare parts. D

Water pump Table, complete Angle cutting guide Roller for table Plug for tank Wrench 30 Locking nut for flange

577 32 69-02 544 94 85-01 543 04 61-46 543 04 63-00 543 04 60-51 543 04 59-00 543 85 01-75

Slurry collection tray, adjustable for 45° and 90° cuts.

diamond blades. MATERIAL

150 COMBI

– –

GRANITE MARBLE

l l l l l

CU R E D C O NC RE T E REINFORCED CONCRETE B R ICK RO O F T IL E AB R ASI vE M AT E RI A L A S P H A LT

Read more on page l = Optimal l = Good l = Acceptable

210

220

250 COMBI

l l l l

– –

l l l l

l l l l l

254

–

– – – –

256

254

– –

280

410

420

450 COMBI

– – – – –

l l l l

– –

l l l l

l l l l l

–

l l l

257

–

l l l

– – – –

254

– –

480

– – – – –

– = Not recommended

249

Husqvarna TS 300 E. Applications. ■

All kinds of bricks and blocks.

Benefits.

Solid construction with protected guide rails. ■ Foldable legs for easier transport and handling. ■ Large table to handle bigger materials. ■ Can plunge or cut at 45°, for maximum versatility. ■

Technical specifications. Power Diamond blade, max Cutting depth, max Weight

2200 W 300 (350) mm 80 (100) mm 82 kg

More technical specifications on page 254.

Product specifications. TS 300 E, 230 V, 1-phase

965 15 46-06

Accessories. A Angle cutting guide

543 04 61-46

Spare parts. Water pump Table, complete Roller for table Plug for tank Wrench, simple Locking nut for flange

577 32 69-02 544 94 78-01 543 04 63-00 543 04 60-51 543 04 34-50 543 85 01-75

Angle cutting guide.

diamond blades. MATERIAL

150 COMBI

– –

GRANITE MARBLE

l l l l l

CU R E D C O NC RE T E REINFORCED CONCRETE B R ICK RO O F T IL E AB R ASI vE M AT E RI A L A S P H A LT

Read more on page l = Optimal l = Good l = Acceptable

250

– = Not recommended

210

220

250 COMBI

l l l l

– –

l l l l

l l l l l

254

–

– – – –

256

254

– –

280

410

420

450 COMBI

– – – – –

l l l l

– –

l l l l

l l l l l

–

l l l

257

–

l l l

– – – –

254

– –

480

– – – – –

251

Husqvarna TS 73 R.

Side support.

Angle cutting guide.

Applications. ■

Product specifications. TS 73 R, 230 V, 1-phase

All larger tiling materials.

Benefits.

965 15 38-03

Accessories.

High precision rail saw with unique long-life rail system. Plunge cut and bevel cuts (from 45 to 90°). ■ 730 mm cutting length (to cut a 50 × 50 cm tile diagonally). ■ Folding legs and removable water tray, for easier cleaning and transport. ■ ■

Technical specifications. Power Diamond blade, max Cutting depth, max Weight More technical specifications on page 256. * By reversing the material.

1000 W 230 mm 50 / 100 * mm 47 kg

A Angle cutting guide

543 06 98-41

Spare parts. Side support Water pump, 230 V Plug water tray Wrench 19 Locking nut for flanges

544 94 53-01 577 32 69-02 543 04 60-51 543 04 58-95 543 07 20-02

diamond blades for TS 73 R. MATERIAL H A RD TI LE S , P ORCE LLA NATO CE RA M I C TI LE S GRA NI TE , H A RD M A RB LE GRA NI TE , S OF T

Read more on page l = Optimal l = Good l = Acceptable

252

PORCELAIN PLUS

MIzER CONTINUOUS RIM

l l l l l

289

– = Not recommended

Husqvarna TS 66 R.

Wide cutting table to handle larger material.

Easy and safe storage of the removable legs.

Applications. ■

Spare parts.

Tile cutting.

ON / OFF switch and motor 230 V, 50 Hz ON / OFF switch Capacitor Water pump Feet pad Locking knob 45° Rubber splash guard Rubber splash guard, rear Inner flange Outer flange Flange locking nut (LH)

Benefits.

Light and compact rail saw. Two working positions: on floor or on legs. ■ Plunge cuts and bevel cuts up to 45°. ■ Tile cutting up to 45 × 45 cm diagonally. ■ ■

Technical specifications. Power Diamond blade, max Cutting depth, max Weight

543 85 03-24 543 04 04-95 543 85 03-29 543 04 05-03 543 04 60-31 543 04 60-82 543 04 04-91 543 04 05-13 543 85 03-25 543 85 03-27 543 85 03-28

800 W 200 mm 40 mm 41 kg

More technical specifications on page 256.

Product specifications. TS 66 R, 230 V, 1-phase

965 15 37-03

diamond blades for TS 66 R. MIzER CONTINUOUS RIM

MATERIAL H A RD TI LE S , P ORCE LLA NATO CE RA M I C TI LE S GRA NI TE , H A RD M A RB LE GRA NI TE , S OF T

Read more on page l = Optimal l = Good l = Acceptable

l l l l l 289

– = Not recommended

253

Technical specifications for masonry saws.

TS 400 F

TS 350 E

Power,W

1500 / 2200 / 2700

Voltage,V

115 / 230 / 400

Phases

1–3

Cycles, Hz

Motor, rpm

2800

Electric protect. class

IP 55

Engine cooling

Air

Blade shaft, rpm

2800

Max blade diameter, mm

400

350

Max depth of cut, mm

125 / 230

100

Max length of cut, mm

700

Arbor size, mm

25.4

Number of belts

Direct drive

Distance blade / support

310

Wet / Dry cutting

Wet

45° angle cut

Yes, head tilting

Water tank capacity, l

Weight, kg

Weight crated, kg

125

120

Dimensions, mm (L ×W × H)

1120 × 600 × 600

Dimensions crated, mm (L ×W × H)

1230 × 720 × 860

Sound pressure level, Lpa (dB)

82 – 97

76 – 82

Sound power level, Lwa (dB)

102 – 104

110 – 112

Hand-arm vibration Aeq, m /s²

Read more on page

248

249

254

TS 300 E

2200 / 2700 230 / 400 1–3 50 2800 IP 55 Air 2800 300 (350) 80 (100) 695 25.4 Direct drive 310 Wet Yes, head tilting 35 82 110 1120 × 600 × 600 1230 × 720 × 860 76 – 82 110 – 112 2 250

255

Technical specifications for tile saws.

TS 73 R

TS 66 R

Power,W

1000

800

Voltage,V

115 / 230

230

Phases

Cycles, Hz

Motor, rpm

2800

Electric protection class

IP 54

Max blade diameter, mm

230

200

Max depth of cut, mm

50/100

Arbor size, mm

25.4

Max length of cut, mm

730

660

Wet / dry cutting

Wet

45° angle cut

Head tilting

Water tank capacity, l

Weight, kg

Weight crated, kg

Dimensions, mm (L ×W × H)

1060 × 575 × 600

950 × 480 × 490

Dimensions crated, mm (L ×W × H)

1070 × 590 × 650

960 × 460 × 540

Sound pressure level, Lpa (dB)

Sound power level, Lwa (dB)

Hand-arm vibration Aeq, m /s²

Read more on page

252

253

* At 45°.

256

Comparision chart – standard features.

TS 400 F

TS 350 E

Blade adaptation 300, 350 and 400 mm

• • • • • • • • •

• – – – – • • • –

• • • • • – – – – – – – • – • –

Read more on page

248

249

250

No volt release switch Plunging head Blade shaft wrench Straight cutting guide Water pump Quick-connect electric pump Transport wheels Angle cutting guide Quick disconnect flange Slurry collector tray Laser pointer Side extension for table Folding legs Semi-automatic foldable legs Blade adaptation 300 – 350 mm

• • • • • •

TS 73 R

• • • • • •

TS 66 R

Blade GS 2 S, continuous rim

• • • • • • •

Read more on page

252

253

Blade shaft wrench Angle cutting guide Adjustable cutting guide Water pump Plunging head Side extension for table

TS 300 E

257

This professional range has been developed for intensive use, and is optimised for particularly demanding work environments and materials from hard ceramic tiles to highly abrasive low density bricks and blocks. The features originate in our global experience of heavy-duty jobs. The blade range accommodates several low-noise core blades with a special steel core that reduces the noice by 50 %, highly recommended by both operators and surroundings.

258

diamond blades for tile saws. MATERIAL H A RD TI LE S , P ORCE LLA NATO CE RA M I C TI LE S GRA NI TE , H A RD M A RB LE GRA NI TE , S OF T

Read more on page l = Optimal l = Good l = Acceptable

PORCELAIN PLUS

MIzER CONTINUOUS RIM

l l l l l

263

â&#x20AC;&#x201C; = Not recommended

dIAMONd BLAdES FOR MASONRY ANd TILE SAWING

diamond blades for masonry saws. MATERIAL

150 COMBI

– –

GRANITE MARBLE

l l l l l

CU R E D C O NC RE T E REINFORCED CONCRETE B R ICK RO O F T IL E AB R ASI vE M AT E RI A L A S P H A LT

Read more on page l = Optimal l = Good l = Acceptable

210

220

250 COMBI

l l l l

– –

l l l l

l l l l l

261

–

– – – –

261

– –

280

410

420

450 COMBI

– – – – –

l l l l

– –

l l l l

l l l l l

–

l l l

260

–

l l l

– – – –

261

260

– –

480

– – – – –

– = Not recommended

259

DiamonD blaDes for masonry saws

HUSQVARNA 420 T15 PRODUCT NUMBER

DIAMETER, MM

BORE

WATER SLOTS

SEGMENT LENGTH, MM SEGMENT WIDTH, MM

SEGMENT HEIGHT, MM

5 2 5 3 6 30 01 5 2 5 3 6 31 01

355 415

25.4 25.4

Narrow Narrow

40 40

15 15

3.2 3.2

Other dimensions available on request. HUSQVARNA 450 T15 PRODUCT NUMBER

DIAMETER, MM

BORE

WATER SLOTS

SEGMENT LENGTH, MM SEGMENT WIDTH, MM

SEGMENT HEIGHT, MM

5 2 5 3 6 43 01 5 2 5 3 6 44 01

355 415

25.4 25.4

Narrow Narrow

40 40

15 15

3.2 3.2

Other dimensions available on request.

HUSQVARNA 410 HUSQVARNA 410 PRODUCT NUMBER

DIAMETER, MM

BORE

WATER SLOTS

SEGMENT LENGTH, MM SEGMENT WIDTH, MM

SEGMENT HEIGHT, MM

5PRODUCT 2 5 3 6 21 01 NUMBER 5 2 5 3 6 22 01 5 2 5 3 6 23 01

DIAMETER, MM 25.4 BORE 305 355 25.4 415 25.4

WATER SLOTS Narrow Narrow Narrow

SEGMENT LENGTH, MM 3.2 SEGMENT WIDTH, MM 40 40 3.2 40 3.2

SEGMENT HEIGHT, MM 10 10 10

HUSQVARNA 420 PRODUCT NUMBER

DIAMETER, MM

BORE

WATER SLOTS

SEGMENT LENGTH, MM SEGMENT WIDTH, MM

SEGMENT HEIGHT, MM

5 2 5 3 6 26 01 5 2 5 3 6 27 01 5 2 5 3 6 28 01

305 355 415

25.4 25.4 25.4

Narrow Narrow Narrow

40 40 40

10 10 10

3.2 3.2 3.2

HUSQVARNA 450 COMBI PRODUCT NUMBER

DIAMETER, MM

BORE

WATER SLOTS

SEGMENT LENGTH, MM SEGMENT WIDTH, MM

SEGMENT HEIGHT, MM

5 2 5 3 6 32 01 5 2 5 3 6 34 01 5 2 5 3 6 37 01

305 355 415

25.4 25.4 25.4

Narrow Narrow Narrow

40 40 40

10 10 10

3.2 3.2 3.2

HUSQVARNA 480 PRODUCT NUMBER

DIAMETER, MM

BORE

WATER SLOTS

SEGMENT LENGTH, MM SEGMENT WIDTH, MM

SEGMENT HEIGHT, MM

5 2 5 3 6 45 01 5 2 5 3 6 46 01 5 2 5 3 6 48 01

305 355 415

25.4 25.4 25.4

Narrow Narrow Narrow

40 40 40

10 10 10

260

3.2 3.2 3.2

DiamonD blaDes for masonry saws

Husqvarna 200 Series. For extreme performance on handheld power cutters. 300 – 415 mm diameter available. Husqvarna 210 ■ Husqvarna 220 ■ Husqvarna 250 Combi ■ Husqvarna 280 ■

HUSQVARNA 210 PRODUCT NUMBER

DIAMETER, MM

BORE

WATER SLOTS

SEGMENT LENGTH, MM SEGMENT WIDTH, MM

SEGMENT HEIGHT, MM

5 2 5 3 6 10 01 5 2 5 3 6 11 01 5 2 5 3 6 12 01

305 355 415

25.4 25.4 25.4

Narrow Narrow Narrow

40 40 40

8 8 8

3.2 3.2 3.2

HUSQVARNA 220 PRODUCT NUMBER

DIAMETER, MM

BORE

WATER SLOTS

SEGMENT LENGTH, MM SEGMENT WIDTH, MM

SEGMENT HEIGHT, MM

5 2 5 3 6 13 01 5 2 5 3 6 14 01 5 2 5 3 6 15 01

305 355 415

25.4 25.4 25.4

Narrow Narrow Narrow

40 40 40

8 8 8

3.2 3.2 3.2

HUSQVARNA 250 COMBI PRODUCT NUMBER

DIAMETER, MM

BORE

WATER SLOTS

SEGMENT LENGTH, MM SEGMENT WIDTH, MM

SEGMENT HEIGHT, MM

5 2 5 3 6 16 01 5 2 5 3 6 17 01 5 2 5 3 6 18 01

305 355 415

25.4 25.4 25.4

Narrow Narrow Narrow

40 40 40

8 8 8

HUSQVARNA 280 HUSQVARNA 280 PRODUCT NUMBER

DIAMETER, MM

BORE

WATER SLOTS

SEGMENT LENGTH, MM SEGMENT WIDTH, MM

SEGMENT HEIGHT, MM

5PRODUCT 2 5 3 6 19 01 NUMBER 5 2 5 3 6 19 01 525362001

DIAMETER, MM 25.4 BORE 305 355 25.4 415 25.4

WATER SLOTS Narrow Narrow Narrow

SEGMENT LENGTH, MM 3.2 SEGMENT WIDTH, MM 40 40 3.2 40 3.2

8SEGMENT HEIGHT, MM 8 8

3.2 3.2 3.2

Husqvarna 100 Series. Economical quality for the occasional user. Suits a broad range of materials on low horse power hand held saws. 300 – 415 mm diameter available. ■

Husqvarna 150 Combi

HUSQVARNA 150 COMBI PRODUCT NUMBER

DIAMETER, MM

BORE

WATER SLOTS

SEGMENT LENGTH, MM SEGMENT WIDTH, MM

SEGMENT HEIGHT, MM

5 2 5 3 6 04 01 5 2 5 3 6 05 01 5 2 5 3 6 06 01

305 355 415

25.4 25.4 25.4

Narrow Narrow Narrow

40 40 40

7 7 7

3.2 3.2 3.2

261

dIAMONd BLAdES FOR MASONRY SAWS

Husqvarna Maxipro Laser Granite Series.

HUSQVARNA MAXIPRO LASER STONE

HUSQVARNA MAXIPRO LASER STONE PRODUCT NUMBER

DIAMETER, MM

BORE

BLADE GEOMETRY

SEGMENT LENGTH, MM SEGMENT WIDTH, MM

SEGMENT HEIGHT, MM

5 2 5 3 5 50 36

350

25.4

Segmented

3.2

Application chart. MAXI PRO 150 LASER COMBI GRANITE

MATERIAL

GRANITE MARBLE CU R E D C O NC RE T E REINFORCED CONCRETE B R ICK RO O F T IL E A S P H A LT

Read more on page l = Optimal l = Good l = Acceptable

262

– = Not recommended

220

250 COMBI

l l l l

– –

l l l l

l l l l l

254

– –

l l l l

l l l l l

–

– – – –

256

254

– –

AB R ASI vE M AT E RI A L

210

– –

280

410

420

450 COMBI

– – – – –

l l l l

– –

l l l l

l l l l l

–

l l l

257

–

l l l

– – – –

254

– –

480

– – – – –

dIAMONd BLAdES FOR TILE SAWS

HUSQVARNA MAXIPRO PORCELAIN +

Wet (105–350 mm)

Provides long life and fast, smooth chip free cutting of porcelain and vitrified tiles. Will also cut granite, marble and other hard, non-abrasive natural stone.

HUSQVARNA MAXIPRO PORCELAIN + PRODUCT NUMBER

DIAMETER, MM

BORE

BLADE GEOMETRY

SEGMENT WIDTH, MM

SEGMENT HEIGHT, MM

5 2 5 3 5 50 24 5 2 5 3 5 50 25 5 2 5 3 5 50 26 5 2 5 3 5 50 27 5 2 5 3 5 50 28 5 2 5 3 5 50 29

105 125 180 230 250 350

22.2 22.2 25.4 25.4 25.4 25.4

Continuous Rim Continuous Rim Continuous Rim Continuous Rim Continuous Rim Continuous Rim

1.7 1.7 1.7 1.9 1.9 2.4

7 7 10 10 10 10

MIZER CONTINUOUS RIM Husqvarna Mizer Diamond Blades. Wet above 150 mm diameter (105–250 mm)

Premium quality blades which have developed forsolution situations where cost A non-interrupted continuous rimbeen provides the best iswhere a principal consideration andis hassle free working is essential. a perfect chip-free edge required. MIZER CONTINUOUS RIM

Wet above 150 mm diameter (105–250 mm)

A non-interrupted continuous rim provides the best solution where a perfect chip-free edge is required. HUSQVARNA MIZER CONTINUOUS RIM PRODUCT NUMBER

DIAMETER, MM

BORE

BLADE GEOMETRY

SEGMENT WIDTH, MM

SEGMENT HEIGHT, MM

5 2 5 3 5 50 66 5 2 5 3 5 50 67 5 2 5 3 5 50 68 5 2 5 3 5 50 69 5 2 5 3 5 50 70 5 2 5 3 5 50 71 5 2 5 3 5 50 72 5 2 5 3 5 50 73

105 115 125 150 180 200 230 250

25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4

Continuous Rim Continuous Rim Continuous Rim Continuous Rim Continuous Rim Continuous Rim Continuous Rim Continuous Rim

1.7 1.7 1.7 1.7 1.7 1.7 1.8 1.8

7 7 7 7 7 7 7 7

Application chart. MATERIAL HARD TILES, PORCELLANATO CE R A MI C TI L ES GR AN IT E, H A RD M AR BL E GR AN IT E, SO FT

Read more on page l = Optimal l = Good l = Acceptable

PORCELAIN PLUS

MIzER CONTINUOUS RIM

l l l l l

289

– = Not recommended

263

264

REMOTE DEMOLITION

Benefit overview

266

Husqvarna DXR

268

Technical specifications for demolition robots

276

Our remote-controlled demolition robots are the very latest in demolition machines, featuring high power, low weight and functional design. They are the obvious choice for users who want manoeuvrable yet highly powerful, stable machines with long reach. Our DXR machines have a modern and easy-to-use remote control, with unrivaled user-friendliness and well-considered design. All this, combined with our experience, know-how and global presence mean you are also assured of highly accessible and competent service and support.

265

Remote demolition – benefit overview.

Full control of the demolition job.

The remote control for the Husqvarna DXR is the market’s most modern and easy-to-use model, delivering a unique user-friendly and well-considered design. It steers everything the machine does, simply and conveniently. The control box is equipped with a 3.5-inch colour display that is easy to read and uses industrial Bluetooth technology – a first for this type of machine. The remote control is mounted on a curved aluminium bar which is worn comfortably over the operator’s shoulder, instead of a conventional strap. It’s easy to put on and off, and makes operation more comfortable and ergonomic. The control remains secure even when the operator moves around the site.

The machines developed entirely by Husqvarna are the most powerful in their class. They are easy to operate thanks to smart functional design, innovative engineering and their technology. They move quickly into position and are ready to start work without time-consuming preparation.

The low height provides good view over the machine when you work, making operation both more efficient and safer as well as lowering the machine’s centre of gravity.

266

The telescopic boom on the DXR 310 has a range of approximately 5.5 m including the breaker. Itâ&#x20AC;&#x2122;s made of high-quality steel and can withstand high stresses.

The ergonomic joysticks with one-handed control means that the tower and the arm can be operated while the machine is being transported.

Because itâ&#x20AC;&#x2122;s only 77 cm wide, the DXR 140 passes through all normal doorways. It climbs stairs easily and operates on uneven surfaces and close to walls, due to the individually controlled outriggers. The track widener facilitates transport on uneven surfaces.

267

Husqvarna DXR 310.

With different tools you can further increase efficiency, areas of application and profitability. The DXR 310 can be equipped with a number of different tools.

Remote control.

Applications.

Perfect for demolition and smaller excavation work, both indoors and out. ■ Efficient in tough environments, like the process industry. ■ Handles building demolition in most types of materials. ■ Ideal for demolition of concrete and brick constructions, staircases, roofs, balconies, as well as sensitive locations like courtyards. ■

Benefits.

Long telescopic arm of high-quality steel and stepless slow-motion operation deliver maximum usability and precision. ■ Great flexibility in terms of demolition method. ■ Extremely robust and durable. ■ Its low height allows the user good vision over the machine during operation, and helps give it a low centre of gravity. ■

268

The remote control is the market’s most modern and easy to use, with one-handed operation, 3.5 inch colour display and Bluetooth technology (a stable, globally certified technology that is less sensitive to interference). A sturdy harness with curved aluminium bar enhances control and comfort. ■ Only 78 cm wide, so it fits through most doorways. ■ Individually controlled outriggers enable it to work on uneven surfaces and close to walls. ■ Strong, durable baseplate is cast in one solid cast steel piece with integrated lifting points. ■ Strong LED lights provide good workplace illumination. ■ The power unit’s location above the undercarriage and the easy-opening housing are examples of design solutions that make the DXR 310, together with the DXR 250, the market’s most easily serviced demolition robots. ■ With Husqvarna’s global service network you always have good access to servicing and product specialists. ■

Breaker.

Individually controlled outriggers.

Bucket.

Read more on page

268

*Reach measured on machine with breaker SB 202/SB 152 (DXR 140), from centre of rotation to tip of breaker, with machine's arm at maximum extension, in horizontal position.

276

DXR 250

DXR 140

18/22

1620

975

4.5

3.7

Included on standard version

200

250

0-65

0-52

Variable load-sensing axial piston pump

780

771

1695 (incl. dozer blade)

1614 (incl. outriggers)

1035

854

Modular, digital CAN-based

Portable

Radio or cable

Industrial Bluetooth, class 1

Up to 100 m

High-capacity Li-ion 1600 mAh

270

272

Technical specifications for crushers.

DCR 300

DCR 100

COMMENT

Mainly for

DXR 250/DXR 310

DXR 140

Weight, kg

274/604

192/423

Incl. hoses and adapter plate

Jaw opening, mm/inch

430/17

425/16 3/4*

Crushing force, kN/t

440/45

335/34*.317/32**

Max power at the tips (in max opening position, crushing start)

Depth, mm/inch

200/7.9

193/7.6**

Large depth which gives high operation efficiency

Rebars size, mm/inch

30/1.2

28/1.1

Read more on page

275

*Pins in outer pos. **Pins in inner pos.

277

metres

REACH, DXR 310, MM

5488

2655

–1

–2

5148 5

metres

–1

–2

–3

REACH, DXR 250, MM metres 5

4765

1933

–1

metres

–1

–2

4381

REACH, DXR 140, MM metres 5

4391

1849

–1

3721 4

metres

278

–1

–2

DIMENSIONS, DXR 310, MM

Ø 1574

1605

1484

1035

1464

Ø 1679

780 1110 1638 1734 1921

(121)

2056 2594

DIMENSIONS, DXR 250, MM

Ø 1643

1422 1801

1515

Ø 1536

1695

780 1110 1374

2288

DIMENSIONS, DXR 140, MM

854

1210 1215 1283

Ø 1343

1555 1614

771 1548 1625 1770

1932

279

280

Protective equiPment

The aim of all our development work is to make it easier for the person using our machines. Obviously, this covers everything from the accessories which adapt the machines for various tasks to personal work and safety equipment. The common denominator is that everything should be easy to use. Here are some examples of protective gear, clothes and accessories for construction work. Most products are tested and approved in accordance with the applicable European standards and CE norms, where required.

281

Protective equipment that makes work more practical and convenient. In our wide range of protective equipment you will find products aimed at making your job safer, more convenient and more practical â&#x20AC;&#x201C; so you can always achieve the best possible results.

Protective GLoveS.

Comfortable gloves with leather palm and velcro fastening. Back of polyester and reinforced leather thumb. Approved according to current EN standards.

505 64 20-19 Size 9 505 64 20-20 Size 10 505 64 20-22 Size 12

Protective BootS.

Boots for power cutting with approved fire resistant rubber and reinforced toe cap. Non-slip sole prepared for studs and ankle protection. Roomy fit and ridges on heel for easy removal. Approved according to EN 345 SB E. 505 67 39-45 Size 45 505 67 39-46 Size 46 505 67 39-47 Size 47

282

PROTECTIVE TROUSERS. Trousers made

of ventilating material with 4-way stretch. The material is stretchable in all directions which provides for high durability and freedom of movement. Perfect for the professional power cutter user. The trousers have been reinforced in Aramid material on knees and Cordura nylon on the lower front part. Lighter and more comfortable due to our new saw protection material. Greater ventilation due to a spacer material in the rear and zipped ventilation openings at back of legs. The back pockets can also be opened for extra ventilation. Wide elasticized waist and a raised back.

HeArinG Protection witH HeAdBAnd.

Comfortable and lightweight with a flexible padded headband. Design allows 20 % adjustment of pressure. Approved according to current EN standards. 505 66 53-04

523 07 82-46 Size S 523 07 82-50 Size M 523 07 82-54 Size L 523 07 82-58 Size XL 523 07 82-62 Size XXL

Protective HeLmet. With extra-large visor, neck guard and hearing protectors. Approved according to current EN and ANSI standards. 544 80 89 01

Protective GLASSeS, cLeAr X.

Protective glasses with non-scratch, clear lenses, extendable frames and lenses that can be angled. Approved as per EN 166 and Ansi Z87+. 544 96 38-01

283

Service and troubleshooting of diamond blades. Husqvarna has prepared this guide to help you find, identify and resolve the problems which you may encounter with diamond saw blades. The majority of problems encountered arise from – the use of a blade not suited to the job, – the incorrect use of a blade, – equipment faults. symptom

Loss of tension.

“undercutting”.

There is “undercutting” when the steel plate wears more rapidly than the diamond segment, particularly at the joint between the segments and the steel plate. uneven segment wear.

284

cause

remedy

The blade is being used on a poorly aligned saw.

Correct the alignment of the saw.

The blade is too hard in relation to the material being cut, which causes excessive stress on the steel plate.

Ensure that the blade is suitable for the material being cut (consult the selection table or see your distributor).

Slippage of the material causes deformation of the blade – it twists or bends.

Secure the material firmly while sawing.

The use of flanges which are too small or of different diameters causes unequal pressure on the steel plate.

Ensure that the flanges are of the right size and the same diameter.

The blade is being used at the wrong speed of rotation.

Check whether the spindle is rotating at the correct speed, using a tachometer. This precaution is particularly important for concrete saws.

The blade is poorly fitted onto the spindle and bends when the flanges are tightened.

Hold the blade on the spindle until the outer flange and the nut have been firmly tightened.

The steel plate heats up due to friction caused by too rapid or uneven wear of the rim.

Use a blade with more side clearance or of a specification more suited to the material.

This situation is caused by grinding of the blade by very abrasive materials during sawing. Usually materials with a high sand content are responsible for this type of wear (see section “Loss of segment”).

The abrasive slurry must be dispersed over a greater area, away from the critical zone of the segment. Very often, it is sufficient to use protective segments placed on the steel plate to modify the areas constantly subject to abrasion. Although they are effective in the majority of cases, these segments do not give total protection. Use a high flow of water to remove the slurry.

With a flat saw, when cutting in one pass through more than the total thickness of the material, the cooling water escapes from the cutting line and this causes the blade to overheat.

Adjust the depth of cut so that a few millimetres of uncut material remains; this will hold the cooling water in the kerf.

The segments are worn on one side only, which reduces the side clearance. This wear is generally caused by poor blade alignment or inadequate cooling on both sides of the blade.

Check the saw alignment. Clean the cooling device, ensure that the front edge of the flange is correctly cooled. Check that the pump is supplying water in sufficient quantities and regularly. (See section “Excessive wear” below).

The blade has lost its circular shape because of wear caused by poor bearings, a worn spindle, dirty or damaged flanges or even excessive baulking. (See section “Excessive wear” below).

Replace the bearings or the worn spindle as necessary; do not remove the drive pivot pins when supplied with the flanges.

symptom

excessive wear.

cracked centre plate.

Never use a blade with a cracked plate.

cause

remedy

The blade used is not suitable for the highly abrasive material being cut (e.g: a tile-cutting blade used on a concrete block).

See the blade selection table or consult your distributor who will indicate the correct blade specification.

Blade cooling is insufficient; this problem is often found because of excessive wear in the centre of the segment. (Note: in the two cases mentioned above, the diamonds generally project very sharply).

Clean the cooling system. Ensure that the water pump is operating correctly.

Wear accelerates if the blade has lost its circular shape; this may be due to poor bearings, a worn spindle or the use of a blade which is too hard in relation to the material being cut.

Check the bearings and the spindle. If they are worn, replace them before fitting a new blade.

Output power is insufficient because V-belts are not properly tensioned, voltage is inadequate or speed is incorrect.

Tension the belts correctly. Replace worn belts. Check the voltage. Use an appropriate power source.

Cutting speed is too fast.

Reduce the speed of advance.

Blade is not perpendicular to the material being cut.

Check the speed of the blade’s drive spindle and the flanges to ensure correct alignment of the blade and of the machine.

Spindle is rotating too slowly.

Check the speed of the drive spindle. If necessary, change the equipment or modify speed of rotation.

The blade is too hard for the material being cut.

Use the appropriate blade with a softer bond.

Cutting pressure is too high or a blade jammed or twisted in the cut may bend or flex the blade’s steel plate. When it is subjected to extreme tension and to metal fatigue, there is a risk of the steel plate cracking.

The operator must use stable, even pressure to make the tool penetrate the material and should take care not to twist or jam the blade in the cut.

A cracked centre can be a consequence of overheating. Overheating is caused by inadequate water supply or incorrect use of a blade intended for dry cutting.

Use sufficient water to cool diamond blades for wet cutting (e.g. 7–18 litres / minute for flat saws). Allow sufficient air to circulate around the diamond blades when dry cutting so as to prevent overheating.

Excessive speed of rotation.

Check the machine’s speed of rotation; if necessary, change the equipment or blade.

285

symptom

Loss of blade segment.

Does a blade need repairing? It is possible to replace two or three missing diamond segments providing the plate is not cracked or badly worn. If numerous segments are missing or if only 50% of the practical life of the blade remains, it may not be worthwhile repairing the diamond blade. Ensure there is no other mechanical or operational problem before replacing the blade.

cracked segment.

eccentricity.

286

cause

remedy

The material slips during cutting, which twists or jams the segments enough to break them.

Secure the material firmly while cutting.

The blade is too hard for the material being cut, which causes excessive polishing, which breaks off the segment or causes fatigue.

Use a blade with a softer bond. Consult the blade specification tables.

When worn, the flanges do not provide the necessary support, which causes the blade to deviate.

Replace the two flanges.

The rotation of an ovalised blade (because of a worn spindle or poor bearings) causes the segments to break.

Replace the worn spindle and /or bearings.

Loss of segment caused by overheating. Overheating is detectable by the steel plate taking on a bluish colour, generally limited to where the segment is missing.

Check that the cooling system is not blocked. Test the pump. In the case of dry cutting, it may be necessary to reduce the depth of cut and, after a few minutes, allow the blade to turn freely and cool in the air.

The segment has suffered knocks when moving the machine or when in contact with the material.

Avoid knocking the blade during transport; bring the blade gently into contact with the material.

The blade is too hard for the material being cut.

Use a blade with a softer bond. Adjust cutting speed.

Cutting speed is too fast.

Reduce the speed of advance.

The bond is too hard for the material being cut. A hard bond retains the diamonds which start to round off, thereby smoothing the blade. Instead of cutting, the blade starts to hammer and thereby loses its circular shape.

Use a softer bond that will wear away more easily, allowing the smooth diamonds to become detached and new sharp edges to surface.

The blade spindle may be notched by a groove, caused by the blade rotating between the flanges. If you fit a new blade on the spindle, it will home into the groove and become eccentric as soon as the saw is switched on.

Replace the damaged spindle.

If the spindle bearings are worn, the spindle and the mandrel will rotate eccentrically, which will cause the blade to lose its circular shape. This problem occurs most often with concrete saws when the necessary lubrication of the bearings is neglected.

Fit new bearings. In some cases, it may be necessary to replace the spindle as well if it is worn or if it is no longer properly aligned.

symptom

overheated blade.

ovalised bore hole.

cause

remedy

The necessary cooling water has not been adequately distributed.

Check that the volume of water is sufficient and that the cooling system is not blocked. Use dry blades for shallow cuts only (2 to 5 cm deep) or for cutting with several passes. Let the blade turn freely every 10 to 15 seconds to allow the air to cool it.

Incorrect specification for the material to be cut.

Consult the blade selection table for the appropriate specification.

Cutting speed is too fast.

Reduce the speed of advance.

The spindle is badly worn because the blade is poorly fitted.

Check that the blade is properly fitted on the spindle before tightening the flanges.

If the flanges are not tightened, the blade will rotate around the spindle.

Always tighten the nut on the spindle with a spanner; do not just tighten it by hand. Always use hexagonal nuts and never wing nuts.

The flanges or the spindle are worn and do not provide the blade with the necessary support.

Check the wear on the flanges and spindle. The wear on the two flanges must not be greater than that recommended by the manufacturer. Replace worn parts.

The blade is too hard for the material being cut (e.g. a blade for a block or a universal blade used for a prolonged period on hard brick; a blade for asphalt used to cut reinforced concrete).

See the blade selection table or consult your distributor or the manufacturer who will indicate the proper blade for the material to be cut.

The output power is inadequate to allow the blade to cut correctly (belts too slack, voltage and motor output insufficient).

Check the belts, the voltage and the motor output power.

The blade segments still appear to have some life left but the blade is not cutting.

Cut an abrasive material until the diamonds surface again. This remedy may prove necessary from time to time; however, if the blade becomes dull too often, this probably means it is too hard for the material being cut.

The blade segments still appear to have some life left but the blade is not cutting.

The segments of a blade with a harder bond provided for abrasive materials require a nondiamond support at the base of the diamond segment in order to achieve better adherence to the steel plate. Wearing of the blade to this state is considered normal wear. The blade must therefore be replaced.

The tool becomes smooth because of excessive speed of rotation.

Match the specification and the diameter of the blade to the machine.

The tool becomes smooth due to excessive pressure of the blade on the material to be cut.

Ensure that the pressure of the blade on the material allows natural sharpening of the blade without any excess.

If the oval shape is not too exaggerated, return the blade to the factory for possible repairs. the blade will not cut.

287

Service and trouble-shooting of diamond drill bits. symptom

the tool will not cut.

excessive wear of diamond segments.

excessive wear of the bitâ&#x20AC;&#x2122;s steel tube.

288

cause

remedy

The material is too hard for the diamond specification.

Match the diamond specification to the material.

The bit is glazed (smooth diamonds).

Re-sharpen the tool by drilling into abrasive material (sandstone, block etc.)

Excessive speed of rotation.

Adjust speed of rotation.

The cooling is excessive and causes the tool to aquaplane.

Adjust speed of rotation.

The cooling is excessive and causes the tool to aquaplane.

Reduce the water flow.

Excessive play within the carriage guides.

Adjust the carriage on the slide to reduce play.

The weight on the tool is insufficient.

Increase the weight on the tool.

The machine is badly fixed.

Check that the machineâ&#x20AC;&#x2122;s fixing is correct.

The motor is too weak.

Match the motor power to the diameter.

Insufficient irrigation.

Adjust the water flow.

Insufficient speed of rotation.

Adjust speed of rotation.

Excessive speed of advance.

Reduce speed of advance.

The material is more abrasive than expected.

Use a blade with a harder diamond specification (see drill-bit selection table).

Too much motor power applied to the tool.

Match the motor power to the drill diameter.

Too much play on the machine causing vibrations.

Check the state of the machine.

The machine is badly anchored.

Anchor the machine firmly.

The machine is incorrectly adjusted (excessive play in the carriage guides, motor spindle or adapter out of true, etc.).

Correctly adjust the machine, replace worn parts, correct the play (rollers, bearings, adapters, etc.).

The tool is warped.

Withdraw any warped tool. If it is relatively new, it may be straightened by the supplier.

The bit is not correctly fixed to the motor spindle.

Check that the bit is correctly aligned on the motor spindle (straight line).

There are fragments of metal in the bottom of the hole that have not been evacuated by the coolant.

Remove all the metal fragments from the drilled hole. Temporarily increase the flow of water to clean out the hole and remove any debris that may still be there.

symptom

Segments broken and lost in the hole.

tool jammed in the hole.

cause

remedy

For a bit with brazed segments, stopping the coolant even for an instant has caused the segments to heat up and destroy the brazing.

Always ensure the tool is correctly irrigated.

The bit has suffered some knocks in the hole (due to steel or loose debris, etc.) and these have broken the segments.

Remove the bit from the machine and recover all the bits of steel, segments and debris before introducing a new bit. If any segment debris remains in the hole, there is a risk of very rapid damage to the new bit.

Excessive speed of rotation causes heating up of the segments.

Take the tool out of service, replace or repair it if possible (consult supplier). Adjust the speed of rotation.

Start up too brutal.

Always start drilling gently.

Impacts due to the equipment being dropped.

Avoid dropping the bit on the ground as this can crack the segments.

Debris is blocked between the core and the bit tube (steel, pieces of material); a steel bar has been drilled â&#x20AC;&#x153;banana shapedâ&#x20AC;?; it has moved during drilling and jammed the bit (wedge effect).

Disconnect the bit from the machine: use a spanner to turn the bit in both directions until it is released.

Loss of side-clearance of segments.

Check the side-clearance of the segments. If the play is too little replace the tool.

289

290

HUSQVARNA CONSTRUCTION PRODUCTS 2012

2012 HUSQVARNA CONSTRUCTION PRODUCTS