(US & CA) New Dimension in Surface Preparation 2022 by Husqvarna Construction

NEW DIMENSION IN SURFACE PREPARATION REMOVE, PREPARE & REFINE FLOORS

REMO VE

PREP ARE

GET READY FOR A NEW DIMENSION IN SURFACE PREPARATION. Introducing the former Blastrac surface preparation portfolio of scarifiers, scrapers and floor grinders under the Husqvarna brand. With even wider options, and as one passionate team, we are committed to shaping the surface preparation industry for tomorrow. 3

WIDER OPTIONS. DEEPER EXPERTISE. UNITED TO SERVE YOU.

REFIN

E 4

CONTENT FLOOR APPLICATIONS & SOLUTIONS REMOVAL

7-8

PREPARE

9-10

REFINE

11-16

DUST & SLURRY MANAGEMENT

17-18

EQUIPMENT & CONSUMABLES FLOOR SCRAPERS

23-26

SCARIFIERS

27-30

SHAVERS

31-34

SINGLE DISC GRINDERS

35-38

PLANETARY GRINDERS

39-48

DIAMOND TOOLING

49-64

CHEMICALS

65-66

SUPERFLOOR

67-70

HIPERTROWEL

71-72

DUST EXTRACTORS

73-84

SHOT & STEEL BLASTING SHOT BLASTERS

89-92

STEEL APPLICATIONS

93-94

STEEL BLASTERS

95-98

DUST EXTRACTORS

99-100

REMOVAL

WHICH TYPE OF FLOOR DO YOU WANT TO REMOVE?

THIN COATINGS FROM HARD FLOORS

THIN COATINGS FROM SOFT FLOORS

THICK AND RESILIENT COATINGS FROM HARD FLOORS

SHOT BLASTING

GRINDING

SCARIFYING

Page 89-92

Page 35-48

Page 27-30

METHODS TO REMOVE COATINGS There is more than one method to remove a coating from a floor. Choosing wisely between multiple methods to remove floors will enable you to achieve better results, reduce tooling cost, optimize labor time and create better conditions for floor maintenance. Industries have different requirements from floor materials. Therefore, before removing a floor, you have to determine which surface preparation methods are the most suitable in terms of budget, efficiency, quality and of course the finished result. Industrial floors are subject to movements of loads, chemical products and damage througout their lifetime. When removing old and damaged industrial floor coatings, the objective is to remove the floor coatings without damaging the concrete base layer beneath them.

THICK AND RESILIENT COATINGS FROM SOFT FLOORS

GLUED SOFT COVERINGS

GLUED HARD COVERINGS

SHAVING

SCRAPING

RIDE-ON SCRAPING

Page 31-34

Page 23-26

Page 23-26 8

PREPARE

WHAT CSP LEVEL ARE YOU LOOKING FOR?

CSP-1 LIGHT GRINDING

CSP-2 MEDIUM GRINDING

CSP-3 VERY LIGHT SHOT BLASTING OR VERY ROUGH GRINDING

CSP-4 LIGHT SHOT BLASTING

CSP-5 MEDIUM SHOT BLASTING

To achieve CSP-1, use a Husqvarna grinder with metal bonded diamond tools.

To achieve CSP-2, use a Husqvarna grinder with metal bonded diamond tools.

To achieve CSP-3, preferably use a Blastrac shot blaster* with small sized steel shot at maximum speed.

To achieve CSP-4, use a Blastrac shot blaster* with small / medium sized steel shot at high speed.

To achieve CSP-5, use a Blastrac shot blaster* with medium sized steel shot at medium speed.

CSP-8 MEDIUM / HEAVY SCARIFYING OR LIGHT MILLING / PLANING

CSP-9 HEAVY SCARIFYING OR MEDIUM MILLING / PLANING

CSP-10 HEAVY MILLING / PLANING

To achieve CSP-8, use a Husqvarna scarifier at high depth.

To achieve CSP-9, use a large To achieve CSP-10, use a large Husqvarna scarifier at Husqvarna scarifier at very very high depth. high depth.

CSP-6 CSP-7 MEDIUM/HEAVY SHOT BLASTING HEAVY SHOT BLASTING OR MEDIUM SCARIFYING OR LIGHT SCARIFYING To achieve CSP-6, use a Blastrac shot blaster with medium / large sized steel shot at medium speed or a Husqvarna scarifier at low depth. 9

To achieve CSP-7, use a Blastrac shot blaster* with large sized steel shot at low speed or a Husqvarna scarifier at medium depth.

*Husqvarna branded shot blasters will be available in 2023

METHODS TO PREPARE FLOORS Proper surface preparation of existing concrete is essential for achieving a successful project including resurfacers, polymermodified or selfleveling overlays, sealers, coatings, or stains. Since there are many products available for overlays and restoration, it is important you know the surface condition requirements for the specific product you plan to use. Taking steps to correctly prepare the existing concrete surface will save you time and money, and can substantially reduce the possibility of coating failure. The International Concrete Repair Institute (ICRI) has defined ten classifications for proper surface preparation and has developed profile replica blocks to give a visual point of reference for the user. Each profile carries a CSP number ranging from a base line of 1 (nearly flat) through 10 (very rough).

PREPARATION METHOD

CSP-1

CSP-2

CSP-3

CSP-4

CSP-5

CSP-6

CSP-7

CSP-8

CSP-9

CSP-10

GRINDING SHOT BLASTING SCARIFYING MILLING / PLANING

GRINDING

SHOT BLASTING

SCARIFYING

Thousands of customers around the world use our floor grinders. They have a solid reputation for quality of work produced on industrial, and decorative flooring, but also in decontamination and demolition markets. Available in many sizes and electricallypowered versions can work any time and anywhere.

After the steel abrasive hits the surface, the shot blaster recycles the media. Dust and contaminants are removed by an air wash separator and are removed to a dedicated Husqvarna dust collector. This makes the process almost dust free in operation.

The drum is placed inside the machine and once the machine is switched on, the rotating drum generates centripetal force which ‘slams’ the cutter on to the surface, causing a mechanical cutting action. Dust and contaminants are removed to a dedicated Husqvarna dust collector.

To level uneven floors and remove thin coatings.

To clean and retexture concrete or asphalt.

To level large surfaces or remove thick coatings.

Husqvarna branded shot blasters will be available in 2023.

REFINE

REFINE FLOOR OVERVIEW REFINE CONCRETE FLOORS Decorative floors are a new, fast developing market trend. Concrete floors are no longer considered as sole supports, they have become part of the decoration itself while offering superbly functional features. • Polishing • Bush hammering

• Exposing aggregates • Grooving

REFINE ASPHALT FLOORS Removing the binder of asphalt surfaces in order to show the natural beauty of the colored ggregate particles is often considered the best solution to enhance aesthetic on asphalt because it saves maintenance costs. Asphalt can also be polished for a smooth surface with exposed aggregates. • Polishing • Exposing aggregates

REFINE WOODEN FLOORS Renovate wooden floors in residential settings or school gymnasiums, or outdoor patios, with our special tools developed for wood grinding. • Grinding

METHODS TO REFINE FLOORS Floors are getting more and more focus from architects and facility owners when it comes to functional and aesthetic specifications. Mechanically refining materials that are already part of a construction structure, such as concrete, is often a sustainably smart choice.

REFINE NATURAL STONE FLOORS Just as the name suggests, natural stone is stone created by nature. Natural stone is taken from the Earth’s crust and shaped to the desired size and form through sawing, grinding or polishing. Its global occurrence, as well as its beautiful and varied appearance, has made it a very popular stone for construction and decoration. • Polishing • Bush hammering

• Grinding

RENOVATION AND MAINTENANCE OF REFINED FLOORS The trend is not to replace existing surfaces but to maintain and renovate them. Industrial flooring renovation offers a cheaper, less invasive solution that is a more environmentally conscious alternative to a new industrial floor. With Husqvarna equipment, you are able to repair cracks or seals and you can maintain your polished concrete by cleaning it and restoring its original properties. • Polishing • Exposing aggregates

REFINE

REFINE CONCRETE FLOORS POLISHED CONCRETE

GRINDING WITH POLISHING TOOLS

The Husqvarna method to polish concrete is called Superfloor™. It consists of a set of pre-defined and well-proven processes including a complete concept of machines, tools and chemicals for creating a mechanically refined, polished and diffusion open concrete surface with resulting surface metrics (Ra, DOI and GU). Superfloor polished concrete floors are very durable, have a low lifecycle cost, high slip resistance and are aesthetically pleasing, making them a popular choice for industrial and commercial facilities.

BUSH HAMMERED CONCRETE Bush-hammering concrete is a process that enables you to achieve a similar effect as natural cut stone, with a concrete surface as the basis. The concrete is mechanically abraded with bush-hammering tools in order to give an authentic effect to outdoor areas. The bush-hammered concrete is ideal for swimming pool surroundings, or for the creation of an anti-skid surface on terraces, garden paths, or pedestrian areas. GRINDING WITH BUSH HAMMERED

GROOVED CONCRETE

SHAVING WITH A SPECIAL DRUM

Grooving concrete is the process of creating patterned grooves along concrete surfaces. It can be used to make a surface anti-slip, for example in a farm to reduce the risk of cattle slipping. It can also be used to create an easy-to-differentiate “guide-line” allowing people with impaired vision to follow with their cane in cities. The shaving method can be used on surfaces such as concrete to create grooves in the floor. By using different sawing blades and drum settings, it is possible to create a wide range of grooved patterns.

REFINE ASPHALT & WOODEN FLOORS POLISHED ASPHALT Polished asphalt exposes the aggregates in the asphalt course. This is done to promote the various colors existing between the bond and the aggregates. The final result has the look of polished concrete or marble. It has a very smooth surface with a high quality feel, which maintains the original properties of the asphalt. Polished asphalt can adapt to many places with high traffic, such as exhibition halls, schools, museums, offices, entrances, pedestrian walk ways, etc. WET GRINDING WITH POLISHING PADS

ASPHALT WITH EXPOSED AGGREGATES Natural exposed aggregate asphalt gives the architect or designer the option to use locally available aggregates to compliment, contrast and enhance roads, car parking areas, footpaths, residential developments, town centers and urban areas. Exposed aggregate asphalt provides a unique, new generation of distinctive asphalt surfaces with greatly increased aesthetic appeal and improved skid resistance while still providing all the functional qualities and durability of traditional asphalt. SHOT BLASTING

WOOD GRINDING With our specifically developed wood grinding tools mounted under our grinders, you can easily renovate any old wooden floor or patio. Unlike many other belt-driven machines, this is a very forgiving method that is equally efficient in residential settings as it is in large school gymnasiums. The possibilities ranges from removing laquer to grinding a very smooth surface. GRINDING WITH DIAMOND TOOLS

REFINE

REFINE NATURAL STONE FLOORS POLISHED MARBLE, LIMESTONE, GRANITE AND CEMENT-BASED TERRAZZO When speaking about natural stone for floors, we mainly think about granite, limestone and marble. We developed special grinding methods for the various types of floors. We have also included cement-based terrazzo, while not actually natural stone, it contains marble and is smoothed using a grinding method that is much the same as natural stone. WET OR DRY GRINDING

BUSH HAMMERED COBBLESTONES / BRICKS Many cities are facing problems due to slippery surfaces on squares, sidewalks, or pavements made of cobblestones or bricks. Cobblestones and bricks get gradually polished because of pedestrian and/or car traffic. Bush-hammering existing cobblestone is the ideal solution in cities to create a slip-resistant surface.

GRINDING WITH BUSH HAMMERED

GRINDED COBBLESTONES The presence of irregular cobblestones in city centers is often a problem for people with reduced mobility, using wheeled support devices to remove unevenness while preserving the charming look of cobblestone surfaces.

GRINDING WITH DIAMOND DISCS

RENOVATION & MAINTENANCE OF REFINED FLOORS REPAIR OF EXPANSION JOINTS The sawing technology can be used on surfaces such as concrete to create a trench in the floor. By using a certain number of sawing blades and drum settings, it is possible to create a trench up to 11.8 in (30 cm) in width.

SAWING

MAINTENANCE OF POLISHED CONCRETE Polished concrete is an attractive flooring solution, especially in industrial and commercial settings. To maintain the particular attributes of polished concrete (e.g. gloss, slip resistance), we recommend cleaning with diamond impregnated Hiperclean pads and periodical maintenance with a floor grinder or burnisher.

BURNISHING | GRINDING

DUST & SLURRY MANAGEMENT

OUR HEPA DUST EXTRACTORS On any construction job, dust is the enemy. It can harm machine operators. It can cause problems with equipment. And it can have a negative effect on working efficiency. No matter your project, make them part of your set-up and enjoy more confidence, higher productivity and a healthier working environment. Most of our models of dust extractors comply with the latest HEPA standards for heavy-duty dust extractors usage (DE 110S / DE 110i / DE 110 / DE 120 / S 36 / T 4000 / T 7500). They are also equipped with EN1822 certified HEPA H13-filters. In addition, our trained service technicians will help keep your dust and slurry equipment in top working condition. Our technicians follow correct service procedures and always use individually tested Husqvarna original HEPA filters for replacement. It is important to maintain your equipment to ensure performance, safety and efficiency throughout your equipment’s life.

THE IDEAL COMPLEMENT TO YOUR AIR QUALITY SYSTEM The Husqvarna A-Line includes some of the most advanced and versatile portable air cleaners available on the market. They are tested and certified for use as both Air Cleaners and Negative Air Machines, making them the ideal complement to your dust and slurry management equipment, as well as in other applications where good air quality is essential. The Husqvarna A-Line provides added workplace safety, and aids in legal compliance. The compact design makes the units easy to move and transport. 17

EVERY BREATH COUNTS No matter which type of surface you are working on, dust and slurry need to be removed in a safe and efficient way to protect you and your team from dust exposure. With Husqvarna, you get access to guidance, knowledge and a broad, fully integrated range of highly efficient equipment for dust and slurry management, enabling you to comply with rules and regulations without compromising your productivity.

HEPA H13 FILTER The strict HEPA standard (EN 1822-1) is divided into different levels (E10 to H14) depending on filtration efficiency. Husqvarna applies level H13, which can separate up to 99.95% of the particles between 0.15 and 0.30 μm in size. This particle size is the hardest to separate – both larger and smaller particles are easier to capture in a filter.

THREE STAGE FILTERING Stage 1: Cyclone chamber removing the heaviest dust fractions. Stage 2: Large, washable sock-style main filter provides long, uninterrupted service. Can be cleaned efficiently from outside the tank with the Jet Pulse filter cleaning system. Stage 3: Individually tested and certified HEPA H13 micro filters catching 99.99% of the remaining silica dust in the respirable fraction (0.3 μm).

JET PULSE FILTER CLEANING Ensures high continuous airflow due to easy and efficient cleaning of the conical main filter without opening the machine, meaning you are not exposed to particles.

PRE-SEPARATION Minimizes the dust particles that make it to the vacuum filter. This prolongs filter list and maintains higher airflow resulting in greater dust pick up and a cleaner working environment.

LONGOPAC® The Longopac bag system ensures a clean and simple change of the bag without any dust spills. Meaning harmful particles are not released into the working environment.

AIR CLEANERS The ideal complement on every jobsite to quickly and efficiently clean the air from airborne dust.

HUSQVARNA EXPERIENCE CENTER IN-PERSON & ONLINE TRAINING COURSES There are many ways to renovate, prepare and create floors. Depending on the material, the desired outcome and the resources available, there are choices to be made. With the right expertise, it becomes easier to make assessments and complete flooring projects faster and with better quality. Our popular training courses are a mix of theoretical and practical sessions designed to improve your skills and make your working day more profitable. To learn more visit: www.husqvarnacptraining.com

EQUIPMENT & CONSUMABLES

FLOOR SCRAPERS

EFFICIENT IN REMOVAL OF FLOOR COVERINGS & ADHESIVES Husqvarna offers a complete range of floor scraping machines and tools for the removal of bonded and soft floor coverings. From the small but powerful walk behind floor scraper to the heavy duty ride-on unit, there is a Husqvarna floor scraper to match every requirement.

LINOLEUM

CARPET

VINYL TILES

CERAMICS

RESINS

EXOPY

REMOVE BONDED AND SOFT FLOOR COVERS Husqvarna floor scrapers are equipped with different types of scraping blades to remove (old or worn out) floor coverings such as hardwood parquet, ceramics, linoleum, vinyl, carpet, woven floor, glue and roofing materials. The stronger the adhesive, the smaller the blade you have to use. Use thicker blades to increase the lifetime or to remove hard materials.

WALK-BEHIND OR RIDE-ON UNITS From the small but powerful walk behind stripper to the heavy duty ride-on unit, there is a Husqvarna floor scraper to match every requirement.

STRONG AND COMPACT DESIGN

BATTERY DRIVEN

Husqvarna floor scrapers are heavy duty and strongly fabricated to create minimum downtime. They can easily pass through a standard doorway.

Husqvarna BMS 220ADB has up to 10 hours of run time thanks to its 12 powerful batteries. It provides complete freedom of movement.

FLOOR SCRAPERS

TECHNICAL SPECIFICATIONS

Product

BS 75

BS 110

970615002

970615101

2-12 (50-305)

282 (128)

375 (170)

34 × 20 × 42 (872 × 511 × 1,062)

38 × 20 × 42 (963 × 511 × 1,062)

0-69 (0-21)

2 (1.5)

Part Number Working width, in (mm) Weight, lbs (kg) Dimensions LxWxH, in (mm) Working speed, ft/min (m/min) Rated power, hp (kW) Required current, A

110-120

Forward & Reverse (Electrically Driven)

2 (51)

13 (4)

15 (4.6)

DE 120

Rated voltage, V Working direction Dust hose connection, in (mm) Noise level, dB(A) Vibration emission, ft/s (m/s ) 2

Applications Recommended dust extractors

FLAT BLADES – TO REMOVE ALL TYPES OF FLOOR COVERINGS A

Description

Part Number

Width, in (mm)

Thickness, in (mm)

BS 75

BS 110

BMS 220ADB

BMS 220LP

Heavy duty blade

533824501

6 (152)

0.09 (2.5)

•

BMS 280LP •

Heavy duty blade

533851501

8 (203)

0.09 (2.5)

•

Heavy duty blade

533850301

12 (305)

0.09 (2.5)

•

Extreme duty blade

533865901

12 (305)

0.18 (4.5)

•

Heavy duty blade

533833701

24 (610)

0.09 (2.5)

•

BMS 220ADB

BMS 220LP

BMS 280LP

SELF-SCORING BLADES – TO REMOVE LINOLEUM, CARPET B

Description

Part Number

Width, in (mm)

Thickness, in (mm)

Self-scoring blade

533857301

6 (152)

0.09 (2.5)

BS 75

BS 110

Self-scoring blade

533860201

10 (254)

0.09 (2.5)

•

Self-scoring blade

533859601

12 (305)

0.09 (2.5)

•

Product

BMS 220ADB

BMS 220LP

BMS 280LP

970615403

970615501

970615302

2-27 (50-686)

2,253 (1,022)

2,900 (1,315)

59 × 24 × 52 (1,499 × 610 × 1,321)

64 × 30 × 63 (1,625 × 762 × 1,600)

Part Number Working width, in (mm) Weight, lbs (kg) Dimensions LxWxH, in (mm) Working speed, ft/min (m/min)

160 (49)

330 (100)

440 (134)

12 × 8 V batteries

25 (19)

Required current, A

N/A

Rated voltage, V

N/A

Ride-On

Rated power, hp (kW)

Working direction Dust hose connection, in (mm)

Hardwood Parquet, Ceramics, Linoleum, Vinyl Carpet, Adhesives, Glue, Tiles

Noise level, dB(A) Vibration emission, ft/s2 (m/s2) Applications Recommended dust extractors

BLADE HOLDERS Description

Part Number

Diameter, in (mm)

BMS 220ADB

BMS 220LP

BMS 280LP

Tool Holder

535371601

BS 75

BS 110

•

Heavy duty blade holder

535255501

6 (152)

•

Heavy duty blade holder

533495602

10 (254)

•

Heavy duty blade holder

533110302

12 (305)

•

Heavy duty blade holder

533335602

27 (686)

•

Description

Part Number

Diameter, in (mm)

BMS 220ADB

BMS 220LP

BMS 280LP

Premium chisel Premium chisel

533858501 533865601

2 (51) 4 (102)

• •

BMS 220ADB

BMS 220LP

BMS 280LP

CHISELS E

BS 75

BS 110

WEIGHT KITS Description

Part Number

Weight, lbs (kg)

BS 75

Weight Kit

533114801

20 (9)

•

Weight Kit

53300601

40 (18)

BS 110

•

SCARIFIERS

RANGE OF HUSQVARNA SCARIFIERS Husqvarna scarifiers are versatile, dust-free surface preparation tools used for concrete, asphalt and even steel surfaces. Scarifiers use steel or carbide tipped cutters, in various shapes, depending on application, that are loaded on shafts placed around the perimeter of a cylindrical drum. As the drum rotates, the cutters impact the surface at a high speed, fracturing the coating and/or contaminants and abrading the concrete surface. Use scarifiers for repairing common slab problems, such as: • • • •

Curled joints or high spots Trowel marks or uneven slabs, Burned slabs due to over-troweling Damage due to weather

Scarifiers remove oil, contaminants, traffic lines, epoxy coatings or paint. They are suitable for smoothing uneven surfaces and trip hazards, or for cutting safety grooves in ramps, walkways and loading docks.

LEVEL LARGE SURFACES OR REMOVE THICK COATINGS When floor scarifying, cutters are loosely fitted on lateral shafts that are then placed inside a drum housing. The drum is placed inside the scarifier and once the machine is switched on, the rotating drum generates centripetal force that ‘slams’ the cutter on to the surface, causing a mechanical cutting action. All Husqvarna scarifiers are equipped with a precise height adjustment system. Dust and contaminants created by the scarifier are removed by a matching Husqvarna dust collector. This makes the scarifying process almost dust free in operation.

ELECTRIC OR GAS Some of our scarifiers come in an electric or a petrol version to give you even more versatility.

LATERAL DRUM LOADING Husqvarna scarifiers are especially designed so that the drum can be easily removed from the side without having to move the machine.

PRECISE HEIGHT ADJUSTMENT The working depth of the drum when using cutting or milling tools is easily adjustable, and precise to the millimeter. This means no underground deterioration.

SCARIFIERS

TECHNICAL SPECIFICATIONS

Product Part Number Working width, in (mm) Weight, lbs (kg) Dimensions LxWxH, in (mm)

CG 200

BMP 335

BMP 4000RC

967662302

970615904 | 534249201*

970616003

7.8 (200)

13 (335)

16 (400)

128 (58)

866 (393) - excl. drum

3417 (1550) - excl. drum

33 × 21 × 9 (780 × 475 × 730)

59 × 24 × 34 (1,499 × 610 × 864)

78 × 50 × 60 (1,981 × 1,270 × 1,524)

1350

1000

300

Electric 3.3 - 40 (1 – 12)

Hydraulic 0-148 (0-45)

9 (3.6)

14.7 (11)

40 (30)

Drum rotation speed, rpm Working speed, ft/min (m/min) Rated power. hp (kW) Required current, A

N/A

Rated voltage, V

N/A

480

Electrically driven | RC optional

Remote controlled

2 (51)

4 (100)

6 (150)

Working direction Dust hose connection, in (mm) Noise level, dB(A) Vibration emission, ft/s (m/s ) 2

10.1 (3.1)

8.2 (<2.5)

Concrete | Stone | Asphalt

DE 120

T 8600

BDC 99

Applications Recommended dust extractors

*Retrofit kit model part number to change the BMC 335 into a scarifier

WHEELS & CUTTERS Description

Part Number

Diameter, in (mm)

Thickness, in (mm)

Carbide wheel

543040216

2.2 (56)

0.25 (6.5)

Machine Application

Cutter spacer

533417701

0.15 (4)

Milling pick for asphalt

533334701

BMP 4000RC

Milling pick for concrete

533127701

BMP 4000RC

Shaft support bushing

534877201

BMC 335

Spacer

543040217

0.11 (3)

Star wheel - processed steel

543040214

2.3 (60)

0.07 (2)

CG 200

TCT tungsten carbide tipped 8 point cutter

533294501

3.1 (80)

0.31 (8)

BMC 335

Tungsten carbide milling cutter 6 pt.

533417701

3.1 (80)

0.78 (20)

BMC 335

Description

Part Number

Diameter, in (mm)

Thickness, in (mm)

5 shaft drum

533873601

Drum 200 mm large (only)

543040210

CG 200

Flail shaft 22 mm

533969601

BMC 335

Spare shaft

543040211

CG 200

-Description

Part Number

Diameter, in (mm)

Thickness, in (mm)

84 carbide wheels and 84 spacers

543040224

2.2 (58)

0.27 (7)

160 star wheels and 164 spacers

543040221

2.3 (60)

0.07 (2)

Complete drum with 8 point TCT cutters

534431501

BMC 335

Complete drum with 6 point milling cutters

533127301

BMP 4000RC

CG 200 BMC 335

CG 200

DRUMS AND SHAFTS Machine Application BMC 335

COMPLETE HEAD ASSEMBLY KITS

BMS 220 CG 200 CG 200

FLOOR SHAVERS

RANGE OF HUSQVARNA SHAVERS Husqvarna offers a range of shaving machines in different sizes in order to suit any need. This improves the mobility of the Husqvarna shavers making them ideal for small to large sized job sites. BMC-335 Surface Shaver is a super-duty machine designed for the most demanding jobs. With variable speed, forward and reverse, this heavy-weight performer can be maneuvered or driven without the shaving drum engaged. An easy-lift system lowers and raises the drum and fine-height adjustments stay in position with controls at the top of the machine. BMP-4000RC is the only ride-on milling machine that can also be used as a sawing machine. With the possibility to remove up to 2.5 inches of surface material in several passes, you are sure to save time on large milling projects. Featuring an electric measuring system with a digital read-out display that gives information about height adjustment and other critical machine operations.

REMOVE THICK COATINGS OR CREATE GROOVES With a shaving machine, a drum equipped with diamond blades is placed inside a drum housing. Once the machine is switched on, the drum rotates at a very high speed to grind off the surface. Dust and contaminants created by the shaver are moved to a dedicated dust collector. This makes the process almost dust free when in operation. In addition, this technology is ideal for applications where limited vibrations are required. Shaving is perfect to remove everything you can’t remove with other technologies, without creating much vibration.

DRUM SETTINGS Shavers use a drum fitted with diamond sawing blades. By using a certain number of sawing blades and spacers, it is possible to create a wide range of trenches from .39-13 in (1-33.5 cm) wide.

PRECISE HEIGHT ADJUSTMENT The working depth of the shaving drum is easily adjustable, and precise to the millimeter. This means no underground deterioration. In order to create a maximum down-force on the rotating drum, our shavers are built with the weight of the machine centered.

ELECTRICAL DRIVE SYSTEM Husqvarna shavers are equipped with an electrical drive system, which saves the operator from having permanent contact with the handle: ergonomic operations, easy adjustable speed and tracking, able to turn 360 degrees.

FLOOR SHAVERS

TECHNICAL SPECIFICATIONS

Product Part Number Working width, in (mm) Weight, lbs (kg) Dimensions LxWxH, in (mm)

BMC 335

BMC 335RC

BMP 4000RC

970615904

Call for Details

970616005

13.2 (335)

14.9 (380)

948 (430) - excl. drum

3,418 (1,550) - excl. drum

55 × 26 × 47 (1,387 × 659 × 1,187)

94 × 33 × 64 (2,378 × 846 × 1,637)

3,000

300

3-40 (1-12)

1-150 (0-45)

20 (15)

40 (30)

Drum rotation speed, rpm Working speed, ft/min (m/min) Rated power, hp (kW) Required current, A Number of Phases Rated voltage, V Dust hose connection, in (mm) Noise level, dB(A)

Recommended dust extractors

480

4 (100)

6 (150)

8 (<2.5)

Concrete | Stone | Asphalt

BDC-66 | T 10000

BDC 99

Vibration emission, ft/s2 (m/s2) Applications

3 480

SAWING BLADES A B

Description

Part Number

Diameter, in (mm)

Thickness, in (mm)

Green diamond blade for universal floors

533772201

10 (255)

BMC 335 | BMC 335RC

Machine Application

Spacer - 0.09 in (2.5 mm thickness)

533806001

0.09 (2.5)

BMC 335 | BMC 335RC

Diamond blade

533716301

16 (400)

BMP 4000RC

NAKED DRUM Description

Part Number

Diameter, in (mm)

Thickness, in (mm)

Machine Application

Shaving drum - 13 in (335 mm large)

533236201

BMC 335 | BMC 335RC

Shaving drum - 15 in (380 mm large)

533196601

BMP 4000RC

Description

Part Number

Diameter, in (mm)

Thickness, in (mm)

Shaving drum complete with 80 green blades

Call for details

COMPLETE DRUM E

Machine Application BMC 335 | BMC 335RC

SINGLE DISC GRINDERS

RANGE OF HUSQVARNA SINGLE DISC GRINDERS Preparing, grinding and polishing of concrete floors as well as repairing and polishing of terrazzo and other natural stone are demanding jobs. Our mission is to enable you to perform at your maximum potential by providing you with a system that outperforms any competition. Husqvarna single disc floor grinders are versatile and highly productive concrete grinding machines that suit a wide variety of floor preparation and finishing jobs. These grinders are ideal for removing, among others, adhesives, paint, epoxy and spackle on small to mid-size concrete areas. Our single disc grinders are available in versions for 1-phase and 3-phase electrical power as well as gas power, with grinding widths from 11 in (280 mm) to 16 in (400 mm).

ADHESIVE REMOVAL

COMING SOON

PAINT REMOVAL

EPOXY REMOVAL

SPACKLE REMOVAL

CONCRETE GRINDING

EDGE GRINDING

LEVEL UNEVEN FLOORS AND REMOVE THIN COATINGS Husqvarna single disc floor grinders use horizontally rotating discs to perform a multitude of tasks, from light texturing to opening the pores of the surface, to the removal of paints and coatings. The single grinding head allows all the pressure of the machine to be distributed onto a few diamond tool segments making single disc grinders ideal for aggressive grinding.

EASY TO TRANSPORT AND SET-UP Husqvarna single disc grinders are designed to easily maneuver and transport. For example, some models have a detachable motor and smart lifting handles.

EDGE GRINDING With both the HTC 270 EG and PG 280, you are able to grind up to the edges without any problem. The HTC 270 EG is specifically developed for edge grinding and has a wide variety of settings to match any situation. The long nose enables access to hard-to-reach spots such as under stairs, radiators or any other fixed obstacle.

EFFICIENT DUST MANAGEMENT A self-adjusting, floating cover with brush list follows the surface of the floor and creates a tight seal to prevent the dust from escaping to the working environment

SINGLE DISC GRINDERS

TECHNICAL SPECIFICATIONS COMING SOON

Product Part Number Grinding width, in (mm) Rated power, hp (kW) Required current, A Rated voltage, V Number of Phases Weight, lbs (kg) Disc speed, rpm Grinding pressure, lbs (kg) Remote control

BGS 250

BG 250

BG 250 Petrol

PG 280

PG 400 Petrol

970556601

970614902

970614801

970494606

970494604

967676301

10 (250)

11 (280)

16 (400)

1.5 (1.1)

7.4 (5.5)

13 (9.7)

2 (1.5)

3 (2.2)

10.2 (7.6)

110

230

110-120

220-240

134 (61)

322 (146)

154 (70)

308 (140)

900

1,920

970/1,720

440-1,125

73 (33)

121 (55)

77 (35)

152 (69)

No / No

47 × 20 × 37 (1,187 × 505 × 936)

51 × 18 × 43 (1,301 × 458 × 1,106)

47 × 16 × 39 (1,200 × 410 ×1,000)

35 × 19 × 28 (900 × 480 × 710)

2 (51)

3 (75)

2 (51)

Vibration emission, ft/s (m/s )

8 (< 2.5)

13 (4)

15 (4.6)

Recommended dust extractors

DE 120

T 4000 | S 36

S 36 Propane

DE 120

T 4000 | S 36

Mist/Weights Number of discs Dimensions LxWxH, in (mm) Dust hose connection, in (mm) Noise level, dB(A) 2

GRINDING TOOL HOLDERS FOR PG 400, PG 280 & HTC 270 A

Description

Part Number

Diameter, in (mm)

Tool Holder Multi EG 270 4

529617003

10.6 (270)

Machine Application

Tool Holder Multi 280 6

529617002

11 (280)

PG 280

Tool Holder Multi 400 9

529617001

16 (400)

PG 400

Tool Holder Redi-Lock® 280 12

598502101

11 (280)

PG 280

Tool Holder Redi-Lock® 400 18

595308701

16 (400)

PG 400

HTC 270 EG

POLISHING TOOL HOLDERS Description

Part Number

Diameter, in (mm)

Tool Holder Elastic EG 270 4

598966901

10.6 (270)

HTC 270 EG

Pad Holder EG 270

593314704

10.6 (270)

HTC 270 EG

Tool Holder Slidemag

593314705

10.6 (270)

HTC 270 EG

Machine Application

Product

PG 400

HTC 270 EG

967966406

967966404

967966405

967838710

967838708

967838709

Grinding width, in (mm)

16 (400)

10.6 (270)

Rated power, hp (kW)

3.7 (2.8)

4.5 (3.4)

3 (2)

220-240

440-480

110-120

220-240

440-480

254 (115)

227 (103)

Part Number

Required current, A Rated voltage, V Number of Phases Weight, lbs (kg) Disc speed, rpm Grinding pressure, lbs (kg) Remote control

1,720

460-1,220

143 (64)

80 (36)

No / No

57 × 20 × 41 (1,400 × 510 × 1,050)

40.5 x 19 x 33 (1,030 × 490 × 830)

2 (51)

100

Vibration emission, ft/s (m/s )

21 (6.5)

12 (3.75)

Recommended dust extractors

T 4000 | S 36

DE 120

Mist/Weights Number of discs Dimensions LxWxH, in (mm) Dust hose connection, in (mm) Noise level, dB(A) 2

GRINDING DISCS FOR BGS 250 & BG 250 Description

Part Number

Diameter, in (mm)

10 segment premium arrow plate

533603901

10 (250)

Machine Application BG 250

20 segment premium arrow plate

533603801

10 (250)

BG 250

20 segment turbo premium blade (25/30 Grit)

533186301

10 (250)

BG 250

PCD disc

533137201

10 (250)

BG 250

General purpose grind wheel (18/20 Grit)

533183501

10 (250)

BGS 250

General purpose grind wheel (18/20 Grit)

533181801

10 (250)

BGS 250

PLANETARY GRINDERS

RANGE OF HUSQVARNA PLANETARY GRINDERS Preparing, grinding and polishing of concrete floors as well as repairing and polishing of terrazzo and other natural stone are demanding jobs. Our mission is to enable you to perform at your maximum potential by providing you with a system that outperforms any competition. Our range of floor grinders means business. These robust, compact grinders are designed and engineered to handle everyday challenges with confidence, power and an unmistakable sense of ease. Letting you focus on your work. Husqvarna grinders deliver outstanding performance in all conditions - this means you can get the job done faster and with higher precision. When it comes to surface preparation and tools that polish, grind concrete surfaces or remove previous treatments, we’re often talking about work that is both difficult, strenuous and time consuming. By listening to our customers we have been able to build a range of tools to fit every step of the surface preparation process.

ADHESIVE REMOVAL

PAINT REMOVAL

EPOXY REMOVAL

SPACKLE REMOVAL

CONCRETE GRINDING

CONCRETE POLISHING

COATINGS, PREPARE & POLISH CONCRETE FLOORS Preparing, grinding and polishing of concrete floors as well as repairing and polishing of terrazzo and other natural stone are demanding jobs. Our mission is to enable you to perform at your maximum potential by providing you with a wide range of large grinding machines, offering ingenious features and benefits to fit your needs.

DURATIQ SYSTEM The grinding head design is based on equal portions of precision and strength. The dust-tight, hermetically sealed design increases the service life of all components, while increasing grinding precision.

DUAL DRIVE TECHNOLOGY Husqvarna’s unique Dual Drive Technology™ has even higher disc speed capabilities. It enables you to individually control the speed and direction of the disc rotation and the speed and direction of the grinding head.

FLEET READY Husqvarna Fleet Services™ is a digital, cloud-based asset management service that gathers and presents key machine data. Machine sensors are either embedded or retrofitted to the exterior of the machine.

PLANETARY GRINDERS

PG SYSTEM

BLASTRAC SYSTEM

HTC SYSTEM

HIGH PERFORMING • Dual drive technology for aggressive cuts and versatility on some models • Weights optional for large planetary grinders (540 & Up) • Remote control options ™

POWERFUL & PRODUCTIVE • High power motors • High grinding pressure • Variable speed options for all planetary grinders

CONTROL & GRINDING • Instructive human-machine interface keeps the operator in full control • Lights for best visibility • 3 or 4 grinding heads to optimize grinding process

RELIABLE • Sealed, well proven grinding head • Easy access/maintenance of belt transmission in the grinding head • Sealed and cooled electrical box

ROBUST & HEAVY-DUTY • Metallic shroud • Floating metallic skirt • Powerful belt transmission for maximum torque

PRODUCTIVE • Mist spray system that cools the tools for optimal performance • Adjustable weights to adjust the grinding pressure

USER-FRIENDLY • Intuitive human-machine interface • Multiple operating positions and grips • Great visibility around the machine

GREAT DUST PICK-UP • Complete dust pick-up system (metallic shroud, floating skirt and rubber list close to outlet) facilitates minimal additional cleaning

RELIABLE • Sealed, well proven, grinding head • Easy access/maintenance of belt transmission in the grinding head • Sealed and cooled electrical box

PLANETARY GRINDERS

TECHNICAL SPECIFICATIONS

Product

PG 450

PG 510

967648608

967648605

967932005

967932004

967932003

18 (450)

20 (515)

2 (1.49)

3 (2.2)

3-5.4 (2.2-4)

110-120

220-240

440-480

Weight, lbs (kg)

240 (109)

(120-133)

Disc speed, rpm

495/705

669

(70)

(66-80)

No / No

55 x 20 x 41 (1,400 × 510 × 1,050)

60 x 22 x 37 (1,525 × 555 × 950)

2 (51)

Part Number Grinding width, in (mm) Rated power, hp (kW) Required current, A Rated voltage, V Number of Phases

Grinding pressure, lbs (kg) Mist/Weights Number of discs Dimensions LxWxH, in (mm) Dust hose connection, in (mm) Noise level, dB(A)

Vibration emission, ft/s2 (m/s2)

12.8 (3.9)

8 (<2.5)

Recommended dust extractors

S 36 | DE 120

T 4000 | S 36

Product Part Number Grinding width, in (mm) Rated power, hp (kW) Required current, A Rated voltage, V Number of Phases

PG 540

967977406

967977404

967977402

20 (500)

5.5 (4)

220-240

440-480

Weight, lbs (kg)

178 (392)

Disc speed, rpm

348-1,160

Grinding pressure, lbs (kg)

165 (75)

Mist/Weights

No / Yes

40 × 22 × 28.9 (1,015 × 560 × 735)

2 (51)

Number of discs Dimensions LxWxH, in (mm) Dust hose connection, in (mm) Noise level, dB(A) Vibration emission, ft/s (m/s )

8 (<2.5)

Recommended dust extractors

T 4000 | S 36

Product

HTC 5

967863616

967863621

967863618

20 (515)

3 (2.2)

5 (4)

220-240

440-480

Weight, lbs (kg)

269-394 (122-178)

Disc speed, rpm

360-1,200

159-181 (72-82)

No / No

No /Yes

No / Yes

39 × 22 × 28 (1,000 × 569 × 720)

2 (51)

Part Number Grinding width, in (mm) Rated power, hp (kW) Required current, A Rated voltage, V Number of Phases

Grinding pressure, lbs (kg) Mist/Weights Number of discs Dimensions LxWxH, in (mm) Dust hose connection, in (mm) Noise level, dB(A)

Vibration emission, ft/s2 (m/s2)

9.5 (2.9)

Recommended dust extractors

T 4000 | S 36

Product Part Number

BMG 555

BMG 555P

HTC T6

HTC XP6

970616803

970616805

967839113

967978002

Grinding width, in (mm)

22 (555)

24 (600)

Rated power, hp (kW)

7.4 (5.5)

20 (15)

8 (6)

24 (18)

230

220-240

400

Required current, A Rated voltage, V Number of Phases

Weight, lbs (kg)

657 (298)

724 (328)

844 (383)

1,005 (456)

Disc speed, rpm

350-1,100

640-1,045

450-1,500

750-1,100

Grinding pressure, lbs (kg)

410 (186)

520 (236)

203-491 (92-223)

377-533 (171-242)

No / No

Yes / Yes

82 × 23 × 45 (2,080 × 595 × 1,154)

54 × 26 × 42 (1,385 × 657 × 1,054)

3 (75)

Mist/Weights Number of discs Dimensions LxWxH, in (mm) Dust hose connection, in (mm) Noise level, dB(A) Vibration emission, ft/s (m/s )

8 (<2.5)

Recommended dust extractors

T 7500 | T 4000 | S 36

T 7500 | T 4000 | S 36 | S 36P

T 10000 | T 7500 | D80 | D60

PLANETARY GRINDERS

TECHNICAL SPECIFICATIONS

Product Part Number

PG 690 P

PG 690

PG 690 RC

967980201

967977504

967977502

967977604

967977602

Grinding width, in (mm)

25 (630)

Rated power, hp (kW)

22 (16.5)

16.7 (12.5)

Required current, A

Rated voltage, V

200-240

440-480

200-240

440-480

Number of Phases

Weight, lbs (kg)

875 (397)

1,106 (502)

1,318 (598)

Disc speed, rpm

730-1,010

441-1,470

421-1,403

Grinding pressure, lbs (kg)

414 (188)

502 (228)

533 (242)

No / Yes

54 × 35 × 58 (1,372 × 889 × 1,473)

51 × 26 × 45 (1,300 × 670 × 1,150)

52 × 26 × 45 (1,320 × 670 × 1,155)

3 (75)

Mist/Weights Number of discs Dimensions LxWxH, in (mm) Dust hose connection, in (mm) Noise level, dB(A)

Vibration emission, ft/s2 (m/s2)

8 (<2.5)

Recommended dust extractors

T 8600 P | T 7500

T 7500

T 8600

T 7500

T 8600

HTC X8

HTC T8

PG 830 S

967839707

967839507

967839508

967977704

967977702

31.5 (800)

15 (11)

20 (15)

17 (12)

15 (11)

Product Part Number Grinding width, in (mm) Rated power, hp (kW) Required current, A Rated voltage, V Number of Phases

440-480

220-240

200-240

440-480

Weight, lbs (kg)

1,177 (534)

1,144 (519)

1,098 (498)

1,095 (497)

Disc speed, rpm

430-1,430

421-1,403

Grinding pressure, lbs (kg)

(152-347)

(238)

Mist/Weights

Yes / Yes

No / Yes

60 × 34 × 42 (1,533 × 867 × 1,067)

61 × 33 × 45 (1,550 × 830 × 1,146)

3 (75)

Number of discs Dimensions LxWxH, in (mm) Dust hose connection, in (mm) Noise level, dB(A) Vibration emission, ft/s (m/s )

8 (<2.5)

Recommended dust extractors

T 10000 | D80

T 7500

T 10000 | T 8600 | D80

Product

BMG 780

BMG 780 RC

HTC RX8

970616902

970616904

970617001

967839609

967839611

30.7 (780)

31.5 (800)

20 (15)

20.1 (15.5)

17 (12)

20 (15)

460

230

400

220-240

440-480

Weight, lbs (kg)

1,074 (487)

1,408 (639)

1,217 (552)

1,263 (573)

Disc speed, rpm

400-1,200

430-1,430

Grinding pressure, lbs (kg)

694 (315)

573-822 (260-373)

335-765 (152-347)

No / No

No / Yes

Yes / Yes

84 × 31 × 53 (2,139 × 790 × 1,345 )

60 × 34 × 42 (1,533 × 867 × 1,067)

3 (75)

Part Number Grinding width, in (mm) Rated power, hp (kW) Required current, A Rated voltage, V Number of Phases

Mist/Weights Number of discs Dimensions LxWxH, in (mm) Dust hose connection, in (mm) Noise level, dB(A)

Vibration emission, ft/s2 (m/s2)

9.5 (2.9)

8 (<2.5)

Recommended dust extractors

T 10000 | T 8600

T 7500

T 10000 | T 7500

T 10000 | D80

PG 830

PG 830 RC

BMG 2200 RC

967977804

967977802

967977904

967977902

970616502

31.5 (800)

87 (2,200)

17 (12.5)

22 (16.5)

17 (12.5)

22 (16.5)

84 (63)

Product Part Number Grinding width, in (mm) Rated power, hp (kW) Required current, A Rated voltage, V Number of Phases

125

220-240

440-480

220-240

440-480

400

Weight, lbs (kg)

1,226 (556)

1,437 (652)

6,691 (3,035)

Disc speed, rpm

421-1,403

400-1,200

Grinding pressure, lbs (kg)

635 (288)

666 (302)

(200-440)

No / Yes

No / No

3x3

61 × 33 × 45 (1,550 × 830 × 1,146)

136 × 89 × 78 (3,455 × 2,260 × 1,980)

3 (75)

Mist/Weights Number of discs Dimensions LxWxH, in (mm) Dust hose connection, in (mm) Noise level, dB(A) Vibration emission, ft/s2 (m/s2)

8 (<2.5)

Recommended dust extractors

T 7500

T 10000 | D80

T 7500

T 10000 | D80

PLANETARY GRINDERS

GRINDING & POLISHING TOOL HOLDERS ✪ Standard configuration H Headlock C HTC Cross Resin holders for Diamond Xpress tools, sandpaper, foamflex. Pad holders for Diamond Fenix Pads. EZchange™ CLICK for SF pads. System AIRFLOW

TOOL HOLDER MULTI

System EZchange™ CLICK ELASTIC/ FLEXIBLE TOOL HOLDERS PAD HOLDER

RESIN HOLDER

DIALOC

Grinding Tool Holders

Part Number

Tool Holder EZ AirFlow 230 6 C

593319302

Tool Holder EZ AirFlow 270 6 C

593319301

Tool Holder Multi 180 3 H

529617203

Tool Holder Multi 230 3 H

529617212

Tool Holder Multi 230 6 H

529617202

Tool Holder Multi 270 6 H

529617201

Tool Holder Multi 230 6 C

529617102

Tool Holder Multi 270 6 C

529617101

Polishing Tool Holders

Part Number

Tool Holder EZchange™ CLICK 180 HC

529617303

Tool Holder EZchange™ CLICK 230 HC

529617302

Tool Holder EZchange™ CLICK 270 HC

529617301

Tool Holder Elastic 230 3 C

593319202

Tool Holder Elastic 270 6 C

593319203

Tool Holder Flexible 270 6 C

593319401

Pad Holder 230 C

593314703

Pad Holder 270 C

593314701

Resin Holder 230 C

593314802

Resin Holder 270 C

593314803

Resin Holder 180 H

596901303

Resin Holder 230 H

596901302

Resin Holder 270 H

596901301

Tool Holder Slidemag 155 3

534243401

Tool Holder Slidemag 185 3

534244401

Tool Holder Slidemag 240 6

534247001

Slidemag Velcro wing

534850301

Slidemag foam 155

534413301

Slidemag foam 185

534419701

Slidemag foam 240

534424101

Dialoc plate

533419301

Dialoc plate

970578401

PG 450

PG 510

HTC 5

PG 540

BMG 555

BMG 555 P

BMG 555

BMG 555 P

✪

•

✪

✪ ✪ ✪

• PG 450

•

PG 510

HTC 5

PG 540

•

• • •

•

HTC 6

PG 690 P

PG 690

BMG 780

HTC 8

PG 830 S

PG 830

✪

HTC 8

PG 830 S

PG 830

•

BMG 2200

✪ ✪

✪

• HTC 6

• •

PG 690 P

PG 690

BMG 780

•

BMG 2200

• •

•

• •

•

✪

•

DIAMOND TOOLING

DIAMOND TOOLING FOR FLOOR GRINDERS When it comes to surface preparation and tools that polish, grind concrete surfaces or remove previous treatments, we’re often talking about work that is both difficult, strenuous and time consuming. By listening to our customers we have been able to build a range of tools to fit every step of the surface preparation process. Whatever level of finish you are looking for, Husqvarna offers an array of tools developed for use with most materials. From the hardest concrete floor to the most abrasive, to meet demands for cutting speed and surface finish.

EZ TOOL SYSTEM A complete system of premium diamond tools for removal, grinding, polishing and special applications (natural stone, wood). This tool system fits on all grinders of the HTC system and all grinders equipped with the tool holder Multi (most large PG grinders). The tool holder Multi can be refitted on most grinders to allow usage of the EZ tool system and the Redi tool system. For the Blastrac system, new adapters to the EZ tool system are available.

DISCOVER THE COMPLETE RANGE OF EZ TOOL SYSTEM

PAGE 53-64

REDI TOOL SYSTEM Redi Lock® diamond tools are perfect for concrete grinding applications, such as aggregate exposure, preparation for tiling floors, removal of epoxy coatings and sealers as well as flattening. The system eliminates the need for multiple sets of diamond disc holders, and replaces time consuming screw-ondiamond systems. The Redi Lock dovetail simply locks into the slot and is ready for use. The system is available for a variety of machine manufacturers.

DISCOVER THE COMPLETE RANGE OF REDI TOOL SYSTEM HUSQVARNACONSTRUCTION.COM

DIALOC TOOL SYSTEM

COMING SOON!

DISCOVER THE COMPLETE RANGE OF DIALOC SYSTEM

COMING SOON!

TOOL HOLDER MULTI

EZ HOLDER

DIALOC HOLDER

COMING SOON! EZchange™

Redi Lock®

TOOL HOLDER MULTI

EZchange™

TOOL HOLDER REDI-LOCK

Redi Lock®

DIALOC HOLDER

COMING SOON!

DIAMOND TOOLING

EZ TOOL SYSTEM OVERVIEW TOOLS FOR GRINDING, HONING, TRANSITIONING, FINE POLISHING & COATING REMOVAL S-SERIES

M-SERIES

H-SERIES

X-SERIES

XX-SERIES

SM EDGE

HX EDGE

SP SERIES

SF SERIES

SP EDGE

BLOCKS

ABRASIVE, COARSE & UNEVEN SURFACES

MEDIUM TO HARD CONCRETE GRINDING

EXTREMELY HARD CONCRETE GRINDING

SOFT TO MEDIUM CONCRETE GRINDING

HARD TO EXTRA HARD CONCRETE GRINDING

CONCRETE POLISHING

MAXIMUM GLOSS CONCRETE POLISHING

ALL CONCRETE

CONCRETE GRINDING & HONING

FENIX

#25 GRINDING

#40

#80

HONING & TRANSITIONAL

#150

#200

#400

#800 FINE POLISHING

#1500

#3000

FLOOR PREP & COATING REMOVAL 53

0-1 MM

0-2 MM

1-3 MM

>3 MM

CEMENTIT TOPPING CONCRE

TIOUS GS & RETE

Metal Bond Tools

Resin Bond Tools

Hybrid Bond Tools

DT EDGE

DF EDGE

XPRESS

SGW

EZ PREP 0

EZ PREP S1

EZ PREP M1

EZ PREP H1

T-REX™ SUPER

T-REX™ CLASSIC

T-REX™ DOME

T-REX™ RING

T-REX™ EDGE

TRANSITIONAL TOOL

CEMENTITIOUS TOPPINGS

MARBLE, LIMESTONE, TERRAZZO & CONCRETE

MARBLE, LIMESTONE TERRAZZO & CONCRETE

SCREED, PAINT EPOXY & GLUE

SOFT TO VERY ABRASIVE CONCRETE

SCREED, PAINT, EPOXY & GLUE

EPOXY, GLUE & CEMENTITIOUS TOPPINGS

ABRASIVE, COARSE & UNEVEN SURFACES

SCREED, PAINT, EPOXY & GLUE

DIAMOND TOOLING

DIAMOND TOOLS FOR REMOVAL & SURFACE PREPARATION SUPERPREP & RAVAGER SERIES

A series of tools that has all capabilities you need to deliver profitable results and finish the job on time. The series combines the EZ PREP series, along with the well-known T-Rex™ and Ravager tools. All gathered and packaged under the name Husqvarna Superprep. EZ Prep Series EZ Prep 0 EZ Prep S1 EZ Prep M1 EZ Prep H1

Coating Removal

Part Number

0-2 MM 0-1 MM 1-3 MM 1-3 MM

598885402 598885602 598885702 598885802

1-3 MM 1-3 MM 1-3 MM 1-3 MM

598886101 598886201 598886301 598886401

1-3 MM 1-3 MM 1-3 MM 1-3 MM

598886501 598886601 598886701 598886801

>3 MM >3 MM

598885901 598886001

1-3 MM 1-3 MM 1-3 MM 1-3 MM 1-3 MM

593331001 593346006 593346005 593346003 593346004

593344202 593344205 593344206 593344207

EZ T-Rex™ Super Series EZ T-Rex Super A EZ T-Rex Super A Protective Segment EZ T-Rex Super B EZ T-Rex Super B Protective Segment EZ T-Rex™ Classic Series EZ T-Rex Classic A EZ T-Rex Classic A Protective Segment EZ T-Rex Classic B EZ T-Rex Classic B Protective Segment EZ T-Rex™ Dome Series EZ T-Rex Dome A Protective Segment EZ T-Rex Dome B Protective Segment EZ T-Rex™ Ring Series T-Rex™ Classic 160 MM T-Rex™ Ring Super A 230 MM T-Rex™ Ring Super B 230 MM T-Rex™ Ring Super A 270 MM T-Rex™ Ring Super B 270 MM EZ T-Rex™ Ring Series Ravager 180 MM Ravager 230 MM Ravager 270 MM (3 rolls) Ravager 270 MM (6 rolls)

SMHXX METAL SERIES

A series of tools consisting of five different tool series developed for concrete grinding. EZ S Series EZ S2 Gold DS EZ S3 Grey DS EZ S4 Brown DS EZ S5 Black DS

Grit Size

Part Number

25 40 80 150

598882002 598882102 598882202 598882302

25 25 40 40 80 80 150 150

598882402 598882401 598882502 598882501 598882602 598882601 598882702 598882701

25 25 40 40 80 80 150 150

598883202 598883201 598883302 598883301 598883402 598883401 598883502 598883501

25 25 40 40 80 80 150 150

598884002 598884001 598884102 598884101 598884202 598884201 598884302 598884301

25 25 40 40 80 80

598884802 598884801 598884902 598884901 598885002 598885001

EZ M Series EZ M2 Gold DS EZ M2 Gold SS EZ M3 Grey DS EZ M3 Grey SS EZ M4 Brown DS EZ M4 Brown SS EZ M5 Black DS EZ M5 Black SS EZ H Series EZ H2 Gold DS EZ H2 Gold SS EZ H3 Grey DS EZ H3 Grey SS EZ H4 Brown DS EZ H4 Brown SS EZ H5 Black DS EZ H5 Black SS EZ X Series EZ X2 Gold DS EZ X2 Gold SS EZ X3 Grey DS EZ X3 Grey SS EZ X4 Brown DS EZ X4 Brown SS EZ X5 Black DS EZ X5 Black SS EZ XX Series EZ XX2 Gold DS EZ XX2 Gold SS EZ XX3 Grey DS EZ XX3 Grey SS EZ XX4 Brown DS EZ XX4 Brown SS

DIAMOND TOOLING

POLISHING TOOLS SF RESIN-BONDED POLISHING SERIES

Resin-bonded polishing tools on a flexible backing pad, with magnetic attachment system (no failing glue or hook and loop solutions). For dry polishing providing unsurpassed gloss and DOI. Fantastic results from low grit sizes. SF Series SF5 Black SF6 Blue FS7 Red SF8 White SF9 Yellow SF10 Green SF5 Black SF6 Blue FS7 Red SF8 White SF9 Yellow SF10 Green SF5 Black SF6 Blue FS7 Red SF8 White SF9 Yellow SF10 Green

Grit Size

Size, in (mm)

Part Number

100 200 400 800 1500 3000 100 200 400 800 1500 3000 100 200 400 800 1500 3000

7 (180) 7 (180) 7 (180) 7 (180) 7 (180) 7 (180) 9 (230) 9 (230) 9 (230) 9 (230) 9 (230) 9 (230) 10.6 (270) 10.6 (270) 10.6 (270) 10.6 (270) 10.6 (270) 10.6 (270)

529640801 592640901 529641001 529641101 529641201 529640701 529640802 529640902 529641002 529641102 529641202 529640702 529640803 529640903 529641003 529641103 529641203 529640703

EZ SP POLISHING SERIES

An all-round polishing series with capabilities to reach high gloss levels from 400 grit and up. At the same time improved cutting rates on lower grits.

SP Series SP3 Grey SP4 Brown SP5 Black SP6 Blue SP7 Red SP8 White SP9 Yellow SP10 Green

Grit Size

Part Number

40 80 100 200 400 800 1500 3000

529640403 529640404 529640405 529640406 529640407 529640408 529640409 529640410

DB POLISHING SERIES

Diamond Block are premium tools for all-round polishing and honing with a range between 40-400 grit, perfect for when a 'puck-design' resin tool is preferred. Can be used for wet and dry polishing.

DB Series

Grit Size

Part Number

DB3 Grey DB4 Brown DB5 Black DB6 Blue DB7 Red

40 80 100 200 400

529640303 529640304 529640305 529640306 529640307

FENIX GRINDING & POLISHING SERIES

Diamond Fenix series are perfect for grinding and polishing of concrete and cementitious toppings such as overlays or, screed. Can be used both wet and dry.

Fenix Series

Grit Size

Size, in (mm)

Part Number

DF3 Grey DF4 Brown DF5 Black DF6 Blue DF7 Red DF8 White DF9 Yellow DF10 Green DF3 Grey DF4 Brown DF5 Black DF6 Blue DF7 Red DF8 White DF9 Yellow DF10 Green DF3 Grey DF4 Brown DF5 Black DF6 Blue DF7 Red DF8 White DF9 Yellow DF10 Green

40 80 100 200 400 800 1500 3000 40 80 100 200 400 800 1500 3000 40 80 100 200 400 800 1500 3000

7 (180) 7 (180) 7 (180) 7 (180) 7 (180) 7 (180) 7 (180) 7 (180) 9 (230) 9 (230) 9 (230) 9 (230) 9 (230) 9 (230) 9 (230) 9 (230) 10.6 (270) 10.6 (270) 10.6 (270) 10.6 (270) 10.6 (270) 10.6 (270) 10.6 (270) 10.6 (270)

593342602 593342702 593342902 593343102 593343002 593343202 593343302 593685602 593342603 593342703 593342903 593343103 593343003 593343203 593343303 593685603 593342604 593342704 593342904 593343104 593343004 593343204 593343304 593342504 58

DIAMOND TOOLING

POLISHING TOOLS CONTINUED XPRESS SERIES

Diamond Xpress is a grinding system specifically developed for dry-processing of natural stone such as marble, terrazzo, and limestone. The specific formula and design makes it also a very good polishing tool for hard concrete floors.

Xpress Series DX3 Grey DX4 Brown DX5 Black DX6 Blue DX7 Red DX8 White DX9 Yellow DX10 Green DX3 Grey DX4 Brown DX5 Black DX6 Blue DX7 Red DX8 White DX9 Yellow DX10 Green DX3 Grey DX4 Brown DX5 Black DX6 Blue DX7 Red DX8 White DX9 Yellow DX10 Green

Grit Size

Size, in (mm)

Part Number

40 80 100 200 400 800 1500 3000 40 80 100 200 400 800 1500 3000 40 80 100 200 400 800 1500 3000

593341903 593342003 593342103 593342203 593342303 593342403 593342503 593341803 593341901 593342001 593342101 593342201 593342301 593342401 593342501 593341801 593341902 593342002 593342102 593342202 593342302 593342402 593342502 593341802

TOOLS FOR WOOD GRINDING EZ SL SERIES | SOLD IN 3 PACKS

EZ SL Series EZ SL 30 Wood Gold EZ SL 50 Wood Grey EZ SL 70 Wood Brown

SANDING PAPER

Grit Size

Part Number

Sanding Paper

Grit Size

Size, in (mm)

Part Number

25 40 70

598887001 598887101 598887201

Size, in (mm)

Part Number

7 (180) 9 (230) 7 (180) 9 (230) 7 (180) 9 (230) 7 (180) 9 (230)

593314002 593314003 593319201 593319202 593343801 593314801 593314702 593317703

Sanding Paper Sanding Paper Sanding Paper Sanding Paper Sanding Paper Sanding Paper Sanding Paper Sanding Paper Sanding Paper Sanding Paper

40 60 80 100 120 40 60 80 100 120

7 (180) 7 (180) 7 (180) 7 (180) 7 (180) 9 (230) 9 (230) 9 (230) 9 (230) 9 (230)

593343601 593343701 593343801 593343901 593344002 593343602 593343702 593343802 593343902 593344003

TOOL HOLDERS

Tool Holder Foamflex for wood sanding Foamflex for wood sanding Elastic tool holder EZ Elastic tool holder EZ Tool holder wood sanding Tool holder wood sanding Pad holder Pad holder

OIL PAD | SOLD AS 3 PACK Oil Pad

Size, in (mm)

Part Number

Oil Pad

7 (180)

593772302

DIAMOND TOOLING

HIPERCLEAN CLEANING/MAINTENANCE & BURNISHING PADS HIPERCLEAN PADS & BURNISHING PADS

Ideal for cleaning concrete polished floors. Use with PG 450, PG 530, PG 680 and PG 820 Husqvarna grinders, hand tooling and burnishing equipment.

HiperClean Pads HiperClean 5" HiperClean 5" HiperClean 5" HiperClean 5" HiperClean 7" HiperClean 7" HiperClean 7" HiperClean 7" HiperClean 9" HiperClean 9" HiperClean 9" HiperClean 9" HiperClean 11" HiperClean 11" HiperClean 11" HiperClean 11" HiperClean 17" HiperClean 17" HiperClean 17" HiperClean 17" HiperClean 21" HiperClean 21" HiperClean 21" HiperClean 21" HiperClean 24" HiperClean 24" HiperClean 24" HiperClean 24" HiperClean 27" HiperClean 27" HiperClean 27" HiperClean 27"

Grit Size

Recommended Equipment

Part Number

400 800 1500 3000 400 800 1500 3000 400 800 1500 3000 400 800 1500 3000 400 800 1500 3000 400 800 1500 3000 400 800 1500 3000 400 800 1500 3000

Handheld Grinder Handheld Grinder Handheld Grinder Handheld Grinder PG 450 PG 450 PG 450 PG 450 PG 690, PG 540, PG 510 PG 690, PG 540, PG 510 PG 690, PG 540, PG 510 PG 690, PG 540, PG 510 PG 830 PG 830 PG 830 PG 830 Burnishing Burnishing Burnishing Burnishing Burnishing Burnishing Burnishing Burnishing Burnishing Burnishing Burnishing Burnishing Burnishing Burnishing Burnishing Burnishing

542870076 542870077 542870078 542870079 501764007 501764001 501764002 501764003 589810501 589810502 589810503 589810504 501764009 501764010 501764011 501764012 542870080 542870081 542870082 542870083 542870084 542870085 542870086 542870087 542870088 542870089 542870090 542870091 542870092 542870093 542870094 542870095

DIAMOND TOOL SELECTOR APP How do you handle the complex decision on which diamond tools to use and the quantity needed for your next job? Download the handy Husqvarna Diamond Tools Selector app! You will save valuable time and get the right tools for the job, right from the start, every time. Available for free from App Store.

DIAMOND TOOLING

EDGE GRINDING TOOLS SUPERPREP EDGE SERIES

For heavy removal.

T-Rex™ Edge Series T-Rex Edge T-Rex Edge Prep 0 Edge Prep 0 Edge

Coating Removal

Size, in (mm)

Part Number

1-3 MM 1-3 MM < 1 MM < 1 MM

5 (125) 7 (180) 5 (125) 7 (180)

529859325 529859380 529859125 529859180

Grit Size

Size, in (mm)

Part Number

25 25 40 40 80 80 150 150

5 (125) 7 (180) 5 (125) 7 (180) 5 (125) 7 (180) 5 (125) 7 (180)

529856325 529856380 529856525 529856580 529856625 529856680 529856725 529856780

Grit Size

Size, in (mm)

Part Number

25 25 40 40 80 80 150 150

5 (125) 7 (180) 5 (125) 7 (180) 5 (125) 7 (180) 5 (125) 7 (180)

529856825 529856880 529856925 529856980 529857025 529857080 529857125 529857180

SM EDGE SERIES or soft/medium concrete.

SM Edge Series SM Edge 2 - Gold SM Edge 2 - Gold SM Edge 3 - Grey SM Edge 3 - Grey SM Edge 4 - Brown SM Edge 4 - Brown SM Edge 5 - Black SM Edge 5 - Black

HX EDGE SERIES

For hard/extremely hard concrete.

HX Edge Series HX Edge 2 - Gold HX Edge 2 - Gold HX Edge 3 - Grey HX Edge 3 - Grey HX Edge 4 - Brown HX Edge 4 - Brown HX Edge 5 - Black HX Edge 5 - Black

SUPERPREP EDGE SERIES

For polishing.

SP Edge Series SP Edge 3 SP Edge 4 SP Edge 5 SP Edge 6 SP Edge 7 SP Edge 8 SP Edge 9 SP Edge 10

Grit Size

Size, in (mm)

Part Number

40 80 100 200 400 800 1500 3000

5 (125) 5 (125) 5 (125) 5 (125) 5 (125) 5 (125) 5 (125) 5 (125)

529860103 529860104 529860105 529860106 529860107 529860108 529860109 529860110

Grit Size

Size, in (mm)

Part Number

30 50 100 270 400 30 50 100 270 400

5 (125) 5 (125) 5 (125) 5 (125) 5 (125) 7 (180) 7 (180) 7 (180) 7 (180) 7 (180)

599400701 599400801 599400901 599401001 599401101 599401201 599401301 599401401 599401501 599401601

Grit Size

Size, in (mm)

Part Number

40 80 100 200 400 800 1500 3000

5 (125) 5 (125) 5 (125) 5 (125) 5 (125) 5 (125) 5 (125) 5 (125)

593342601 593342701 593342901 593343101 593343001 593343201 593343301 593685601

DIAMOND TRANSITIONAL HIPER EDGE

For scratch removal on all types of concrete. Hiper Edge Ser Hiper Edge 5 Hiper Edge 5 Hiper Edge 5 Hiper Edge 5 Hiper Edge 5 Hiper Edge 7 Hiper Edge 7 Hiper Edge 7 Hiper Edge 7 Hiper Edge 7

DIAMOND FENIX EDGE

For grinding and polishing concrete and cementitious toppings. SP Edge Series DF Edge 3 DF Edge 4 DF Edge 5 DF Edge 6 DF Edge 7 DF Edge 8 DF Edge 9 DF Edge 10

CHEMICALS

HUSQVARNA FLOOR TREATMENT CHEMICALS FLOOR GROUTING SYSTEM

Husqvarna grouting products are specifically formulated for pore filling of pin-holes and micro cracks in concrete surfaces. GM3000 is our primary recommendation of grouting. A ready-to-use liquid that is easily spread out on to the floor and grinded down into the surface. Suitable for medium- to large-scale projects.

GM+ is well suited for small-scale projects where time is of the essence, and/or specific areas with large pin-holes (up to 5 mm) to fix. Thanks to the dry processing method we avoid slurry and the need of splash protection, also sequential cleaning of the grinders and tools.

Description

Part Number

Size, gal (L)

Consumption Rate

GM 3000 GM 3000 GM 3000 GM+

529750905 529750906 529750907 529750908

1 gallon (3.8 L) 5 gallon (19 L) 55 gallon (208 L) 5 gallon (19 L)

204 ft2/gal (5 m2/L) 204 ft2/gal (5 m2/L) 204 ft2/gal (5 m2/L) 204 ft2/gal (5 m2/L)

FLOOR HARDENING SYSTEM

All Husqvarna CURE densifiers provides a solution capable of increasing the abrasion- and scratch-resistance of concrete, while adding basic stain resistance, limiting efflorescence and dustproofing your surface. At the same time increasing the longevity of nearly any concrete surface, from freshly poured to decades-old concrete, and to do all of this in a labor-efficient, cost-effective manner. It penetrates deep into the surface and reacts with calcium hydroxide present in the concrete to form calcium silicate hydrate (CSH), which progressively hydrates to a glass-like crystalline structure. The silica blend improves the density and hardness of concrete and reduces the penetration of liquids and dirt. Husqvarna CURE densifiers comes in three different versions: CURE (K) – a Potassium silicate. Ideal for densification early in the grinding process or for use on porous or trowelled floors. Well suited for large-scale projects.

CURE (L) – a Lithium silicate. Ideal for dense surfaces or outdoor projects and as an additional lipcoat after the initial CURE application, to optimize the densification effect throughout the grinding process.

CURE + offers premium densification with integrated basic stain protection. It is a hybrid potassium-, lithium-silicate including also siliconate to add a hydrophobic effect. Combining the strengths of both lithium and potassium silicates makes it a great multi-purpose densifier for most types of situations.

Description

Part Number

Size, gal (L)

Consumption Rate

Cure (K) Cure (K) Cure (K) Cure (L) Cure (L) Cure (L) Cure + Cure +

529751005 529751006 529751007 529751303 529751304 529751305 529755301 529755302

1 gallon (3.8 L) 5 gallon (19 L) 55 gallon (208 L) 1 gallon (3.8 L) 5 gallon (19 L) 55 gallon (208 L) 5 gallon (19 L) 55 gallon (208 L)

204 ft2/gal (5 m2/L) 204 ft2/gal (5 m2/L) 204 ft2/gal (5 m2/L) 204-407 ft2/gal (5-10 m2/L) 204-407 ft2/gal (5-10 m2/L) 204-407 ft2/gal (5-10 m2/L) -

FLOOR PROTECTING SYSTEM

All Husqvarna GUARD products provide stain protection to concrete floors and natural stone, restricting the absorption of water, oil, fats and dirt. Stains are kept at the surface level, which simplifies maintenance and extends the lifespan of the floor. Our PREMIUM-grade surface impregnators are all penetrating guards, while our TOPICAL GUARD is a film-forming topical sealer. PREMIUM GUARD SB is a solvent-based penetrating guard that is very easy to apply and provides premium protection. It also enhances the color of the floor. The PREMIUM GUARD is the choice when creating Superfloor™ since diffusionopenness is fully preserved.

PREMIUM GUARD WB is a waterbased version of Premium Guard SB that is not so strong in color enhancement and also provides easier transportation and storage since it is not a hazardous good.

TOPICAL GUARD is a water-based silane modified acrylic sealer that forms a microscopic semi-topical barrier. It is designed to be used when the surface is needing extra protection from topical harsh spills and chemical attacks.

Description

Part Number

Size, gal (L)

Consumption Rate

Premium Guard SB Premium Guard SB Premium Guard SB

529750905 529780906 529750907

1 gallon (3.8 L) 5 gallon (19 L) 55 gallon (208 L)

815-1,630 ft2/gal (20-40 m2/L) 815-1,630 ft2/gal (20-40 m2/L) 815-1,630 ft2/gal (20-40 m2/L)

Premium Guard WB Premium Guard WB Premium Guard WB

501197909 501197910 501197911

1 gallon (3.8 L) 5 gallon (19 L) 55 gallon (208 L)

815-1,630 ft2/gal (20-40 m2/L) 815-1,630 ft2/gal (20-40 m2/L) 815-1,630 ft2/gal (20-40 m2/L)

Topical Guard Topical Guard Topical Guard

580502907 580502908 580502909

1 gallon (3.8 L) 5 gallon (19 L) 55 gallon (208 L)

815 ft2/gal (20 m2/L) 815 ft2/gal (20 m2/L) 815 ft2/gal (20 m2/L)

FLOOR CLEANING SYSTEM

CLEAN & PROTECT is a natural soap, specially developed as a cleaning and treatment solution for concrete and natural stone floors. The soap is entirely based on natural products, and the mixed solution has a pH of 8. The solution leaves a durable upper surface that simplifies future maintenance. Can be used either with a cleaning mop or an auto scrubber. Description

Part Number

Size, gal (L)

Consumption Rate

Clean & Protect Clean & Protect

529755204 529755205

1 gallon (3.8 L) 5 gallon (19 L)

For daily cleaning mix 0.5–1 part Clean & Protect with 100 parts water (0.5–1 dl/10 L) For daily cleaning mix 0.5–1 part Clean & Protect with 100 parts water (0.5–1 dl/10 L)

SUPERFLOOR

POLISHED CONCRETE

SLIP RESISTANCE TEST CONDUCTED ACCORDING TO ANSI A326.3 STANDARD* DCOF – Dry floor

DCOF – Wet floor 0.80 0.70 0.60 0.50 0.40 0.30 0.20 0.10 0.00

Superfloor™ Platinum

FUNCTIONALITY

A Superfloor™ polished concrete has a nearly unlimited service life and can handle the toughest treatment imaginable. Concrete is 80–85% stone and sand, which means your Superfloor™ polished concrete floor is comparable to rock. Clean it with Hiperclean pads, and little more will be needed in the way of maintenance.

* Source: SP Report P303050, SS 137241.

Superfloor™ Gold

Superfloor™ Silver

Superfloor™ Satin

*A NSI A326.3 is the newest US standard for slip-resistance. The standard requires a threshold value of Dynamic friction (DCOF) of 0,42 or greater to be considered safe to walk upon.

ENVIRONMENTAL IMPACT Comparison of the environmental impact of a SUPERFLOOR™ polished concrete versus an epoxy floor

VALUE

A Superfloor™ polished concrete is a very cost-effective solution. The installation cost per square meter is usually low since the concrete is already in place. Due to the extreme durability and low maintenance needs, the life cycle cost of a Superfloor™ polished concrete floor is very competitive.

SUSTAINABILITY

Superfloor™ as a floor solution is an eco-sensible choice, as the process consists of refining the natural components of the concrete without adding more layers of materials. The polishing process requires a minimal amount of chemicals and these have been chosen carefully to cause very little environmental stress.

SUPERFLOOR

• Highly robust, durable floor solution • Low life-cycle cost • Works just as well for new floors as when renovating existing floors • The grinding process is entirely dry, without sludge or water • Extreme evenness means low vibrations • A smart choice for lowering your environmental impact • Easy to maintain

STEP-BY-STEP TO YOUR SUPERFLOOR™ When a concrete floor is cast the strongest material, the stone aggregate, settles below the surface leaving mainly cement at the upper surface. The concrete is ground step-by-step according to a well-defined process to achieve the desired characteristics. Your Superfloor™ polished concrete is there, just beneath the surface! You’ll get your first glimpse of it once you grind away the top layer. Continue grinding and polishing to bring out its full luster. The more aggregate exposed, the stronger the floor. 69

WHICH SUPERFLOOR™ CONCEPT IS RIGHT FOR YOU? In addition to the Satin, Silver, Gold and Platinum concepts, you can also have a custom finish that matches your specific preferences for aggregate exposure and gloss.

Satin Gold

Silver

Platinum

Aggregate

Gloss

SUPERFLOOR™ SATIN

Satin finish is an indoor application for retail areas, shop fronts and indoor public spaces with semi-exposed aggregate and medium gloss appearance. The result is a floor that offers functionality and low maintenance but is still aesthetically pleasing. Aggregate

SUPERFLOOR™ SILVER

Aggregate

SUPERFLOOR™ GOLD

Gold entails a floor that is not ground as deep as with Platinum. However, the floor is polished to the same gloss. Gold can therefore be a good choice for concrete floors that are already smooth and even.

Gloss

Silver is a less glossy variant of Platinum. Since the grinding depth is the same and aggregate is widely exposed, the floor is very strong. Yet, because of fewer polishing steps, the surface of the floor will be matte. A good choice when you do not need or want a highly reflective floor.

Gloss

Aggregate

Gloss

SUPERFLOOR™ PLATINUM

Platinum is the best of the best. By repeatedly grinding and polishing the floor, you get a smoother, more even floor with more aggregate exposure and unmatched resistance to wear. Platinum is the most popular surface finish and is a good choice for most applications.

HIPERTROWEL

HUSQVARNA HIPERTROWEL™ SYSTEM The Hipertrowel™ method is a wet polishing process in six steps (#30G – #600G), and three optional final steps (#800G – #3000G). Depending on the conditions of the floor, initial grinding and grouting with a planetary grinder might be recommended. OPTIONAL FINAL STEPS

WET PROCESS – RESIN STEPS Grit #30

Grit #50

Grit #100

Grit #200

Densifier CURE (K)

Grit #400

Grit #600

Grit #50

Grit #1500

Grit #3000

OPTIONAL AFTER TREATMENTS

WET PROCESS – LONG LIFE METAL STEPS FOR ABRASIVE FLOORS OR WHEN MORE AGGRESSIVE TOOLS ARE NEEDED Grit #30

Grit #800

Hiperclean

Grit #100

TRW Premium Guard floor protection

Final clean and buff with Hiperclean TRW

THE COMPLETE SYSTEM FROM HUSQVARNA HUSQVARNA Ride-on power trowel CRT 60 X, CRT 48, CRT 36

Splash guard Gyro drivers with trowel attachments MAGNETIC MOUNT Hiperflex TRW Diamond tools

HUSQVARNA Slurry-vac: W 70 P + squeegee kit

YOU’LL ALSO NEED ■ ■ ■ ■ ■

Water source Autoscrubber Slurry disposal solution Wall protection plastic cover The PG 280 and HTC 270 EG compliments the system for edge working

Pad Driver

Attachment A

Attachment B

Attachment C

Attachment D

Driver and Attachments Product Description Pad Driver 14" Attachment A Attachment B Attachment C Attachment D Gyro Driver Barring

Tool Information

Part Number

Driver + 4 bolts Mounting plate + rotary bearing Mounting plate + rotary bearing Mounting plate + rotary bearing Mounting plate + rotary bearing -

593946821 593946822 593946823 593946825 593946842 597408601

Tool Information

Part Number

6 tools/pad 6 tools/pad 6 tools/pad 7 tools/pad 7 tools/pad 7 tools/pad 7 tools/pad 7 tools/pad 16 tools/pad 8 tools/pad 8 tools/pad 8 tools/pad -

593946841 593946835 593946836 593946801 593946813 593946814 593946815 593946816 593946817 593946818 593946819 593946820 597279001

Diamond Tools Product Description 14 PT Metal Long-Life 30G 14 PT Metal Long-Life 50G 14 PT Metal Long-Life 100G 14 PT Semi Metal 30G - Purple 14 PT Semi Metal 50G - Green 14 PT Semi Metal 100G - Black 14 PT Semi Metal 200G - Red 14 PT Semi Metal 400G - Yellow 14 PT Resin 600G - Brown 14 PT Resin 800G - Grey 14 PT Resin 1,500G - Blue 14 PT Resin 3,000G - Dark Grey HiperClean TRW - Silver

DUST & SLURRY MANAGEMENT

RANGE OF HUSQVARNA DUST & SLURRY VACUUMS Husqvarna’s range of equipment for dust and slurry management covers all needs and applications within the construction industry – from compact 1-phase dust extractors and efficient slurry vacuums to large, powerful 3-phase dust extractors for heavy-duty jobs. The easily portable air cleaners equipped with HEPA filters complete the setup for a workplace with minimal dust particles. Our complete offering also includes a fully integrated range of highly efficient equipment for dust and slurry management, enabling you to comply with most rules and regulations without compromising your productivity. By combining our industry expertise in concrete cutting, drilling and grinding with the foremost technology in dust and slurry management, Husqvarna has a unique ability to provide you with easy-to-use solutions that deliver continuous high efficiency over a long time span. Handling the dust and slurry more efficiently means a better way of working.

Power Cutters Drilling Wall Saws Angle Grinders Masonry Saws Floor Grinders Soff-Cut®

T 18000

T 10000

T 8600

T 8600 P

T 7500

3-phase

Propane

3-phase

T 4000 P T 4000 P SC DC 6000

HTC D80

HTC D60

S 36

S 36 P

DE 120

DE 110S

DE 110i

S 11

W 70 P

W 70

W 250 P

A 2000

A 600

Petrol

3-phase

1-phase

Propane

1-phase

Petrol

3-phase

COMPLETE SYSTEMS FOR DUST & SLURRY MGMT Concrete dust and slurry need to be removed in a safe and efficient way to protect you and your team from dust exposure. With Husqvarna, you get access to guidance, knowledge and a broad, fully integrated range of highly efficient equipment for dust and slurry management, enabling you to comply with rules and regulations without compromising your productivity.

LONGOPAC BAGS The Longopac® bag system ensures simple changes of the bag without any dust spills.

NEW BATTERY VACUUMS HEPA FILTERS Individually tested and certified HEPA micro filters catching 99.99% of the remaining silica dust in the respirable fraction (0.3µm).

The cordless models feature two different battery eco-systems, both of which can be used to power a constantly increasing range of Husqvarna products. Furthermore, both battery driven dust extractors give you the flexibility to use with many (battery) power tools.

DUST & SLURRY MANAGEMENT

TECHNICAL SPECIFICATIONS

Product

T 18000

T 10000

T 8600

T 8600 P

T 75000

967663601

967663701

967664201

967664801

967664101

24.1 (18)

17 (12.6)

11.5 (8.6)

18 (14)

10.1 (7.5)

Oil capacity, qt (L)

1.8 (1.7)

Fuel

Vapor Propane

Max RPM

3,500

Voltage, V

480

230

11.9

24.2

Part Number Power, hp (kW)

Max rated current, A Power supply Distribution box

Yes

Plug size (male)

HBL460B7W

CS8175

HBL460B7W

Plug size (female)

HBL460R7W

CS8169

HBL460R7W

710

480

353

410

353

140 (3,556)

120 (3,048)

110 (2,794)

115 (2,921)

110 (2,794)

Airflow, CFM Water lift, in (mm) Max vacuum, kPA Suction inlet diameter, in (mm) Number of HEPA filters Weight, lbs (kg) Dimensions - L x W x H in, (mm)

4 (100)

3 (76)

900 (408)

740 (336)

454 (206)

628 (285)

454 (206)

55 × 31 × 71 (1,400 × 788 × 1840)

55 × 29 × 68 (1,400 × 736 × 1,727)

49 × 27 × 69 (1,245 × 686 × 1,753)

Product

T 4000 Petrol

T 4000 Petrol SC Kit

DC 6000

HTC D80

HTC D60

967849301

967973301

967625003

967839011

967839912

10.1 (7.5)

10 (7.4)

10 (7.5)

7.4 (5.5)

1.2 (1.1)

Unleaded 86 octane

3,5000

Voltage, V

380-480

440-480

Max rated current, A

16.7

Honda (Gas)

Part Number Power, hp (kW) Oil capacity, qt (L) Fuel Max RPM

Power supply Distribution box

Yes

Plug size (male)

CS8175

Plug size (female) Airflow, CFM Water lift, in (mm) Max vacuum, kPA Suction inlet diameter, in (mm) Number of HEPA filters Weight, lbs (kg) Dimensions - L x W x H in, (mm)

Amphenol

285

406

412

365

104 (2,642)

84 (2,134)

150 (3,810)

37.5

2 (51)

3 (76)

(76)

452 (203)

640 (290)

600 (272)

395 (179)

33 × 24.5 × 60 (840 × 620 × 1,500)

63 × 30 × 63 (1,600 × 762 × 1,600)

49 × 30 × 75 (1,245 × 766 × 1,900)

32 × 46 × 69 (813 × 1,169 × 1,752)

27 × 49 × 65 (680 × 1,235 × 1,400)

DUST & SLURRY MANAGEMENT

TECHNICAL SPECIFICATIONS

Product

S 36 230 V

S 36 120 V

S 36 Propane

967663802

967663801

967808001

4.8 (3.5)

3.2 (2.4)

10.6 (7.6)

Oil capacity, qt (L)

1.2 (1.1)

Fuel

Vapor Propane

Max RPM

3,500

Voltage, V

230

120

Honda (Propane)

Part Number Power, hp (kW)

Max rated current, A Power supply Distribution box

Yes (30 amp out)

Plug size (male)

CS8269

HBL5366C

Plug size (female) Airflow, CFM Water lift, in (mm) Max vacuum, kPA Suction inlet diameter, in (mm) Number of HEPA filters

Product Part Number Power, hp (kW) Voltage, V Max rated current, A Power supply

353

285

100 (2,540)

80 (2,032)

125 (3,175)

2 (51)

140 (64)

190 (86)

33 × 24.5 × 60 (840 × 620 × 1,500)

Weight, lbs (kg) Dimensions - L x W x H in, (mm)

L6-30

S 11

W 70 P

W 70

W 250 P

970466602

967994701

967702003

967702104

1.9 (1.4)

1.6 (1.2)

2.1 (1.55)

120

16.7 (10A vac /6.7A pump)

13 (10A vac /3A pump)

Distribution box

Airflow, CFM

157

118

160

93 (2,362)

100

Water lift, in (mm) Pump water lift, in (mm)

Max vacuum, kPA

1 (25.4)

35 (16)

99 (45)

99 (34)

59 (27)

17 × 15 × 21 (440 × 380 × 530)

24 × 22 × 49 (600 × 570 × 1,250)

21 × 20.5 × 36 (530 × 520 × 910)

Suction inlet diameter, in (mm) Number of HEPA filters Weight, lbs (kg) Dimensions - L x W x H in, (mm) 77

NEW

DE 120

DE 110 S

DE 110i

970514804

970509604

970514901

3 (2.2)

1.2 (0.9)

Oil capacity, qt (L)

Fuel

Max RPM

Voltage, V

120

Max rated current, A

Battery

NEW

Product Part Number Power, hp (kW)

Power supply Distribution box

Plug size (male)

Plug size (female) Airflow, CFM

265

132

118

Water lift, in (mm) Max vacuum, kPA Suction inlet diameter, in (mm) Number of HEPA filters

2 (51)

1.5 (38)

84 (38)

55 (25)

Dimensions - L x W x H in, (mm)

32 × 16 × 44 (815 × 420 × 1,125)

26 × 16 × 40 (670 × 400 × 1,000)

Product

C 5500

C 3000

A 2000

A 600

Weight, lbs (kg)

Part Number

967664601

967664501

967672204

967664401

Power, hp (kW)

0.80 (0.60)

0.50 (0.37)

Voltage, V

120

Max rated current, A

4.9

3.2

Power supply

Distribution box

Airflow, CFM

600/1,200

300/600

26 (98)

10 (38)

Volume, gal (L) Weight, lbs (kg) Dimensions - L x W x H in, (mm)

101 (46)

49 (22)

150 (68)

60 (27)

33 × 25 × 60 (840 × 620 × 1,500)

26 × 22 × 50 (756 × 546 × 1,275)

29 × 17 × 32 (724 × 424 × 810)

18 × 15 × 18 (465 × 384 × 465)

DUST & SLURRY MANAGEMENT

ACCESSORIES & SPARE PARTS Accessories & Spare Parts Adapter, 2.5" to 3" hose cuff Adapter, Y Pipe 4"-3"-3" Aluminum camlock (3"), female Bags, Longopac 66 ft (25 m) Bags, Longopac, 4pk (72 ft, 6 mil) Blade set, 18" rubber C5500 Pre-separator connection kit C5500 Pre-separator connection kit Camlock adapter (3" - 2"), female Filter, HEPA Filter, HEPA Filter, HEPA 13 Filter sock assembly Filter sock assembly Filter sock assembly Filter, Teflon coated Floor tool (2" x 18") Hose Assembly, 3" Conductive (33' Long) Hose assembly, 2" (25' long) Hose assembly 2" (25' Long) Hose assembly 2.5" (33' Long) Hose-to-wand connection (2") Hosing, vacuum 2" with end fittings (10 m) Hosing, vacuum 3" with end fittings (10 m) Pre-filter, conical Plug, female 100A 230V 3ph Plug, male 100A 230V 3ph Plug, female 50A 480V 3ph Plug, male 50A 480V 3ph Plug, female 60A 480V 3ph Plug, male 60A 480V 3ph Silencer, drum Soff-Cut® kit, SC3000 tank kit Soff-Cut® kit, wide wheel kit Strap (Husqvarna branded) Vacuum wand with floor tool Wand, 2-piece (2")

T 18000 590429401 590429101 590428701 584650201 590429201 590428502 590433302 590433301 590436501 590429701 590429801 579758801 590438801 590438601 590438701 591947401 590428302 590437001 590428101 590437301 590437401 590438101 585871001 525584601 590430202 590436201 590436401 590436202 590436402 542183403 542183404 590429601 596236102 596236801 584618701 585870901 590829401

T 10000

T 8600

T 8600 P

DC 6000

X X

X X X

X X

X X X

X X X X

X X X

X X X X X X

X X X X

X X

X X X X X X X X

Bag Longopac , 4 × 25 meters Bag Longopac recycled HEPA-filter D 80 HEPA-filter D 60 Hose bag, 280 litres Multi hose-hose connector Pre-filter D 60 Pre-filter, sock assy D 80 76 mm vacuum hosing with end fittings (10 m), 1x cam-lock male and 1x cam-lock female

T 4000 Petrol X

X X

Accessories & Spare Parts ®

T 7500

590429201 529681001 593444001 593545501 531099202 536134401 593545901 593530601 525584601

HTC D80

HTC D60

X X X

X X

X X X X

X X X X X

Accessories & Spare Parts Accessory kit (3-piece wand, hose end, floor tool, Brush ZZ061, multi-adapter, dust bag) Adapter, inlet valve Blade set, 18" rubber C 3000 Pre-separator Connection Filter bag HEPA filter (2) Filter, HEPA Filter, Teflon coated Floor tool Floor tool (2" x 18") Hose assembly 2" (25' Long) Hose assembly 2.5" (33' Long) Hose-to-wand connection (2") Bags, Longopac, 4pk (72 ft, 6 mil) Multi adapter Pre-filter, conical Soff-Cut® kit, SC3000 tank kit Soff-Cut® kit, wide wheel kit Wand, 2-piece (2")

598474301 594000901 590428502 590433303 592001401 591924001 590429801 591947401 591992701 590428302 590437301 590437401 590438101 590429201 594956901 590430202 596236102 596236801 590829401

Accessories & Spare Parts Bag Longopac , 4 × 25 meters Bag Longopac recycled Floor tool 450 mm rubber 50 mm Floor tool 370 mm rubber 38 mm HEPA-filter H13 Hose bag, 280 liters Hose bag, 70 liters Hose cap 38/51 mm Hose 51 mm/7.5 m hose inc. adapters Hose 51 mm anti-static/7.5 m hose inc. adapters Hose 38 mm/5 m hose complete inc. adapters Hose 38 mm anti-static/5 m hose inc. adapters Multi adaptor 51 mm hose Multi adapter 38 mm hose Multi hose-hose connector Pre-filter Pre-filter Tool rubber blade set, 370 mm Tool brush strips set, 450 mm Tool brush blade set, 370 mm Vac Kit Attachment K 4000 Vac Kit Attachment K 1 PACE Vac Kit Attachment K 535i Wand 38 mm Wand 50 mm ®

590429201 529681001 536343901 529805001 534123601 531099202 531099201 536349701 536355501 536355601 536355301 536355401 594956801 594956901 536134401 536372701 536372601 529804201 599594201 599594101 523095001 529577901 594077801 536644201 536344201

S 36

S 36 P

X X X

S 11 X

X X X X

X X

X X X X X

X X X X

DE 120

DE 110 S

DE 110i

X X X

X X

X X X

X X X X X

X X X

X X X X X

DUST & SLURRY MANAGEMENT

ACCESSORIES & SPARE PARTS Accessories & Spare Parts Blade Set, 14" rubber Crevice tool Filter, HEPA Filter, polyester Floor tool Hose kit Hose-to-wand connection (1.5") Pump Squeegee Kit Wand, 3-piece (1.5")

590429201 590460801 590427701 590437901 590437801 590437001 591970901 591994101 591994001 590430001 590430002 590480802 590480702 590829401

Dust Boot Dust Boot for Drills & Hammers

W 250 P

X X X X X X X X X X

X X X X X X X

X X

C 5500

C 3000

A 2000

A 600

X X

X X X

X X

Recommended Vacs 590651901

Dust Hoods & Spare Parts Dust Hood (4-5" Grinders) Dust Hood (7-9" Grinders) Brush, hood Cuff, 1.5" hose to hood Cuff, 2" hose to hood Collar, Dewalt D28402 Collar, 5" Dewalt Collar, 5" Bosch Collar, 5" Bosch 850 Collar, 5" Makita Collar, 5" Makita Collar, 5" Metabo Collar, 5" Hitachi Collar, 7" Dewalt Collar, 7" Bosch Collar, 7" Makita Collar, 7" Makita Collar, 7" Flex Collar, 7" Hitachi

W 70

590428501 590428201 592061401 590438901 591992701 590427901 590437501 590469701 591212002 590428601

Accessories & Spare Parts Bags, Longopac, 4pk (72 ft, 6 mil) Filter, HEPA Filter, HEPA Hose adapter, 8"/10" Hose adapter, 12"/14"/16" Hose Assembly, 3" Conductive (33' Long) Hose kit, conductive Pre-filter, carbon charcoal Pre-filter, carbon charcoal Pre-filter, 20 pack ( 12x12x1) Pre-filter, 20 pack (24x24x1) Pre-filter, transportation cover/protection Pre-filter, transportation cover/protection Wand, 2-piece (2")

W 70 P

DE 110 or larger

Recommended Vacs 590651801 590651802 592092501 592092601 592248201 591249801 592091401 592091501 592091601 592091701 592091801 592091901 592092001 592092101 592092201 592092301 592092401 591250601 591255001

DE 110 or larger DE 120 or larger -

Dust Bugs & Spare Parts

Recommended Vacs

Dust Bug 90 (Drilling up to 3 1/4") Dust Bug 180 (Drilling up to 6 3/4") Brush (Dust Bug 90) Brush (Dust Bug 180) Brush holder (Dust Bug 180) Clear Ring (Dust Bug 180) Seal Kit (Dust Bug 180) Seal Kit (Dust Bug 90) Cuff, 1.5" hose to hood (Dust Bug 90 & 180) Cuff, 2" hose to hood (Dust Bug 90 & 180)

590652001 590652002 591258901 591259101 591259301 591259401 591259201 591259001 592092601 591248201

Dust Shrouds, Precast Shrouds & Spare Parts

DE 110 or larger W 70 P Wet -

Recommended Vacs

Deluxe 5" Dust Shroud Deluxe 7" Dust Shroud Precast 5" Shroud (Angle Grinder) Precast 7" Shroud (Angle Grinder) Deluxe nylon strips, 5" Deluxe rubber diaphragm, 5" Deluxe nylon strips, 7" Deluxe rubber diaphragm, 7" Deluxe 7" collar, Bosch Deluxe 7" collar, Hitachi Deluxe 7" collar, Makita Deluxe 7" collar, Metabo Deluxe 7" collar, Dewalt Deluxe hose connection, 1.5" (Dust Shroud 5" & 7")

593010402 593010403 594937221 594937322 591257501 591259501 592687901 591259601 593034201 591252401 591252301 591252501 591252201 591265901

DE 110 or larger DE 120 or larger DE 110 or larger DE 120 or larger -

Longopac Bag

HEPA-filter T-Line

Pre-filter T 10000 & D80

Pre-filter T 4000

HEPA-Filter S 36

Dust Hood

Dust Bug 90

Dust Bug 180

Deluxe Dust Shroud

Precast Shrouds

Dust Boot

Wand

Floor Tool

Hose Complete for cleaning kit

Camlock adaptor female

DUST & SLURRY MANAGEMENT

DUST COLLECTION CROSS REFERENCE CHART DRY APPLICATIONS Equipment

T LINE T 18000

T 10000

PLANETARY & SINGLE DISC GRINDERS PG 830/830 RC a a PG 830 S a a PG 690/690 RC a a PG 690 Propane a a BMG 444 / BMG 444SC HTC 5 BMG 555SC HTC T6/RT6/X6/RX6 a BMG 780 / BMG 780RC a HTC X8/RX8 a HTC 950 RX a PG 540 a a PG 510 PG 450 PG 400 PG 400 Petrol PG 280 BGS 250 BG 250 HTC 270 EG BB 700 FLOOR SCRAPERS BS 75 BS 110 BMS 150 BMS 220ADB SCARIFIERS & SHAVERS CG 200 BMP 215/215 Petrol BMP 265/265 Petrol BMP 355 BMP 4000RC BMC 335/335RC a DRY CORE DRILLING DM 400/430 DM 280 DM 230 DM 220 DM 540i DM 200 DRY POWER CUTTING K 770 Vac K1 PACE K 535i K 4000 DRY MASONRY SAWING MS 360 MS 360 G SOFF-CUT DUST SHIELD WITH 3" & 2" OUTLET Soff-Cut® 5000 a a Soff-Cut® 4200/4000 a a Soff-Cut® 2500/2000 a a Soff-Cut® 150/150 E OTHER APPLICATIONS Angle Grinder (up to 5") Angle Grinder (up to 9") Drills Hammers

T 8600/P

T 7500

a a a a

a(230v)

T 4000 P

DURATIQ LINE D80

D60

a a a a

a(230v)

a a a

DC LINE DC 6000

C LINE C 5500

S LINE & DE LINE

C 3000

S 36

DE 120

DE 110/S 11

A 600

+ + + + + + + + + + + + + + + + + + + + +

a a

+ + + +

a a

+ + + + + +

DB a DB a

+ + + +

VA a

VK a VK a

+ +

+ + +

+ + + +

a a a a +

a a a

a a a a

a a a a a

a a a

+ +

a a a

+ +

DEA/DBa DB a DB a DB a VA a VA a VA a

a a a

a a a a

a DH a DH a DBB a

DBBa

DBB a

DBBa

aAttached to machine + Part of solution DB-Dust Bug DH - Dust Hood DBB - Dust Boot DEA - Dust Extraction Attachment VA-Vac Attachment VK - Vac Kit

A LINE A 2000

SLURRY COLLECTION CROSS REFERENCE CHART WET APPLICATIONS Equipment

W LINE W 70 P

W 70

WATER SOURCE W 250 P

WATER SUPPLY

WALL SAWING WS 482 HF

Slurry Collectora

WS 220

Slurry Collectora

WIRE SAWING CS 2512

CS 10

FS 7000 D/DL

Water pump kita

FS 5000 D

Water pump kita

FLOOR SAWING

FS 4600 FS 3500 E/G

Water pump kita

FS 500 Series

Water pump kita

FS 400 Series

Water pump kita

FS 309

Water pump kita

DM 700

Slurry Collectora/ Slurry Collector+

DM 400/430

Slurry Collectora / Slurry Collector+

WT 15 / PWT 15

DM 280

Slurry Collectora/ Slurry Collector+

WT 15 / PWT 15

DM 230

Slurry Collectora/ Slurry Collector+

WT 15 / PWT 15

DM 220

Slurry Collectora/ Slurry Collector+

WT 15 / PWT 15

K 770

WT 15 / PWT 15 / KV K 760a

K 970

WT 15 / PWT 15 / KV K 970 / KV 1270a

K 1270

WT 15 / PWT 15 / KV K 970 / KV 1270a

K 4000

WT 15 / PWT 15

K 7000

WT 15 / PWT 15

WET CORE DRILLING

DM 540i DM 200 WET POWER CUTTING

K1 PACE K 535i

WET MASONRY SAWING MS 360

Water pumpa

MS 360 G

Water pumpa

MS 610

Water pumpa

aAttached to machine + Part of solution DB-Dust Bug DH - Dust Hood DBB - Dust Boot DEA - Dust Extraction Attachment VA-Vac Attachment VK - Vac Kit

Learn more about OSHA Silica Dust Regulation Compliance with Husqvarna at: www.husqvarnacp.com/us/silica

THE HUSQVARNA ADVANTAGE. FLEET SERVICES. MINIMIZE DOWNTIME. MAXIMIZE RESULTS. Husqvarna is a partner you can trust. With our global network of application specialists and service partners, we support you in your floor grinding and polishing projects. We have also developed a series of services dedicated to making your working day as efficient as possible.

SMART SERVICES FOR AN EASIER WORKING DAY FLEET READY Husqvarna Fleet Services is a digital, cloud-based asset management service that gathers and presents key machine data such as run-time, location, and service interval alerts. Machine sensors are either embedded or retrofitted to the exterior of the machine. Embedded machines, like the PG 830 RC, even present valuable machine health data like machine overload via the service’s Operation Insights module. Husqvarna Fleet Services will help you to make better decisions and unleash the full potential of your operation’s productivity. All data is conveniently displayed in your Husqvarna Fleet Services web portal or mobile app. Connect Your Fleet to Stay in Charge!

UPCARE Maintenance and repairs are a natural part of any operation. However, scheduling and keeping track of service times can be time consuming and often results in unwanted costs as well as unplanned downtime. UpCare is a fixed-price service agreement that will give you security and peace of mind, allowing you to achieve better long-term planning with less paper work.

HUSQVARNA TOOL SELECTOR APP Through the Husqvarna Diamond Tools Selector app, you will now be able to save valuable time and find the right equipment for the right job, every time. By using the app to calculate a complete list of diamond tools and chemicals needed, you’ll be able to do fast estimations and answer quotations quicker. Available for download and use by registered Husqvarna customers.

Scan to download.

GLOBAL SERVICE NETWORK Husqvarna offers a global service network with a strong local presence. When you need a diamond tool, new equipment, technical service or expert advice, our service is just a phone call away.

FINANCE Husqvarna Construction Finance offers financial solutions designed to meet the needs of professionals in the construction industry. We understand the pressures faced by our customers, and this program was designed to make purchasing equipment and diamond tools easy, so you get what you need, when you need it 85

SHOT & STEEL BLASTING

SHOT BLASTERS

IDEAL FOR CONCRETE SURFACE PREPARATION Shot blasters will be rebranded to Husqvarna in 2023. Until then, the entire range will continue to be available under the Blastrac brand. Our sales, service and back-office teams support both brands. We supply a large range of shot blasting equipment, ranging from the 1-88D handheld model to the big 2-48DS. All our shot blasting machines are characterized by their maneuverability, precision and versatility. With all our shot blasters you are able to work in a close-to-dust-free environment when they are connected to an appropriate dust extractor.

CONCRETE SURFACE PROFILES

CSP 3

CSP 4

CSP 5

CSP 6

CSP 7

DUST COLLECTION FOR BLASTRAC PRODUCTS ON PAGE 99-100 89

CLEAN AND RE-TEXTURE CONCRETE OR ASPHALT Closed circuit media blasting machines throw a large amount of steel abrasive media by centrifugal force at the surface. After the steel abrasive hits the surface, the shot blaster recycles the media. Dust and contaminants are removed by an air wash separator and are removed to a dedicated dust extractor. This makes the process dust free in operation. Blasting with steel shot is an environmentally friendly abrasive blasting method, because there is no use of chemical products and no waste of valuable drinking water.

STEEL ABRASIVES Depending on the type of surface you want to blast and the result you want to achieve, you can choose different types of abrasives.

USER FRIENDLY Blastrac shot blasters create minimum vibrations and are easy to move around and can turn at a 360° angle. They do not use any chemicals or waste valuable water.

CLOSED CIRCUIT Every shot blaster has to be connected to a dust extractor. This means that you are able to work dust free.

SHOTS BLASTERS

TECHNICAL SPECIFICATIONS

Product Part Number Working width, in (mm) Weight, lbs (kg) Dimensions LxWxH, in (mm)

1-8DM

1-8DPS30

1-8DPF40

1-10DPS75

1-10DSGI

970553801

970553802

970554201

970554101

970553701

970553901

8 (203)

10 (254)

240 (109)

275 (125)

269 (122)

465 (211)

794 (360)

43 × 15 × 40 63 × 17 × 40 (1,100 × 370 × 1,030) (1,590 × 400 × 1,020)

64 × 18 × 43 (1,625 × 457 × 1,092)

41 × 21 × 41 (1,041 × 533 × 1,041)

Working speed, ft/min (m/min) Rated power. hp (kW)

7.5 (2.3)

10 (3)

3-100 (1-30)

2 (1.5)

3 (2.2)

4 (3)

5 (4)

10 (7.5)

15 (11)

39 | 21

110

230

230 | 400

Required current, A Rated voltage, V Number of phases Dust hose connection, in (mm)

Applications Recommended dust extractors

1-82 (1-25)

2 (51)

3 (76)

5 (125)

Noise level, dB(A) Vibration emission, ft/s2 (m/s2)

41 × 21 × 41 51 × 16 × 47 (1,041 × 533 × 1,041) (1,310 × 400 × 1,200)

8 (<2.5)

Concrete

Concrete | Asphalt

BDC-22

BDC-23 | S 36

BDC-33 | BDC-44

BDC-66

ABRASIVES - STEEL SHOT A

Description

Part Number

1-8DM

1-8DPS30

1-8DPF40

1-10DPS75

1-10DSGI

1-15DSGI

2-20DTMKII

2-48DS

BMR-25

BMR-75

Abrasive S230

534063601

Abrasive S280

534061101

Abrasive S330

534061001

• • •

Abrasive S390

534065701

Abrasive S460

534063501

• • • • •

• • •

1-8DPS30

1-8DPF40

1-10DPS75

1-10DSGI

1-15DSGI

2-20DTMKII

2-48DS

BMR-25

BMR-75

•

WHEEL KITS - PARTS VARY BY MACHINE Description

Part Number

1-8DM

Wheel Kit

533805101

•

Wheel Kit

533805601

Wheel Kit

531459001

Blade Kit

531455901

Pinch Bar

533589901

Blade Kit

533136001

Pinch Bar

533194801

• •

Product Part Number Working width, in (mm)

2-20DTMKII

2-48DS

BMR-25

BMR-75

970554601

970555001

970568801

970554301

15 (380)

20 (508)

48 (1,220)

10 (254)

16 (406)

1,093 (496)

1,268 (575)

2,976 (1,350)

2,600 (1,180)

5,200 (2,041)

71 × 23 × 47 (1,800 × 570 × 1,200)

77 × 28 × 55 (1,950 × 720 × 1,400)

95 × 56 × 57 (2,420 × 1,433 × 1,450)

110 × 43 × 78 (2,794 × 1,092 × 1,981)

120 × 62 × 65 (3,048 × 1,575 × 1,651)

3-82 (1-25)

3-108 (1-33)

41.7 (12.7)

75 (22.9)

2 × 20 (2 × 15)

2 × 15 (2 × 11)

2 × 30 (2 × 22)

25 (18.6)

75 (56)

57 | 27

230 | 400

480

Weight, lbs (kg) Dimensions LxWxH, in (mm)

1-15DSGI 970554001

Working speed, ft/min (m/min) Rated power. hp (kW) Required current, A Rated voltage, V Number of phases Dust hose connection, in (mm)

6 (150)

2 × 6 (2 × 150)

Noise level, dB(A) Vibration emission, ft/s2 (m/s2) Applications Recommended dust extractors

8 (<2.5)

Concrete | Asphalt

Steel | Concrete | Asphalt

Concrete | Asphalt

BDC-66

BDC-99

2-48DC

On-board

MAGNETIC BROOMS D

Description

Part Number

1-8DM

1-8DPS30

1-8DPF40

1-10DPS75

1-10DSGI

1-15DSGI

2-20DTMKII

2-48DS

BMR-25

BMR-75

Magnetic broom

535609601

Handheld magnet

535609401

• •

1-8DPS30

1-8DPF40

1-10DPS75

1-10DSGI

1-15DSGI

2-20DTMKII

2-48DS

BMR-25

BMR-75

•

1-10DSGI

1-15DSGI

2-20DTMKII

2-48DS

BMR-25

BMR-75

BLAST PATTERN REDUCER E

Description

Part Number

1-8DM

4" Reducer

534050601

5" Reducer

534052201

• •

5" Reducer

533385001

5" Reducer

533765601

6" Reducer

534050701

•

MAINTENANCE KITS - PARTS VARY BY MACHINE F

Description

Part Number

1-8DM

Spare Part Kit

533515301

•

Spare Part Kit

533542201

Spare Part Kit

533617401

Spare Part Kit

533737901

Spare Part Kit

533734401

Spare Part Kit

533685301

Spare Part Kit

533650801

1-8DPS30

1-8DPF40

•

1-10DPS75

•

STEEL APPLICATIONS

STORAGE TANK BOTTOM PLATES AND ROOF PLATES

SHIP AND HELICOPTER DECKS

WALKWAYS & HELIDECKS ON OFFSHORE PLATFORMS

STEEL BRIDGES AND STEEL DECKS

STORAGE TANK

SHIP HOLDS

SHIP HULLS

PIPES

VERTICAL SYSTEMS

HORIZONTAL SYSTEMS

Blastrac steel blasting systems are very effective for removing paint, coatings, corrosion, non-skid and other contaminants from steel surfaces. Blastrac steel blasting systems use steel shot or a mixture of angular steel grit and steel shot, allowing the operator to achieve a wide range of anchor profiles and roughness needed for almost any type of coating application.

STEEL SURFACE PREPARATION The performance of protective coatings or paint and related products applied to steel is significantly affected by the state of the steel surface immediately prior to painting. The principal factors that are known to influence this performance are: the presence of rust and mill scale; the presence of surface contaminants including salts, dust, oils and greases; the surface profile. The surface preparation process not only cleans steel, but also creates a suitable profile (anchor pattern) to receive the protective coating. Blastrac closed circuit steel blasting machines are very cost effective and efficient in preparing steel surfaces. They clean and prepare at the same time, ensuring a proper adhesion of the subsequent coating, painting or any other product to be applied. When preparing steel surfaces, we focus on two things: the cleanliness and the roughness levels.

SURFACE CLEANLINESS

SURFACE ROUGHNESS

There are two main international standards regarding steel surface cleanliness: the ISO Standard and the SSPC Standard.

The surface roughness of the steel surface is important to ensure a good adhesion of the coatings (set by an ISO standard). It is measured in microns and it shows the difference between the peaks and troughs in a steel surface. This is important because it will also affect the amount of paint to be used. With Blastrac closed circuit steel blasting machines, it is possible to easily achieve any roughness profiles by adjusting the abrasive mixture and speed of the machine.

ISO 8501-1 standards It is a visual assessment relating to surface cleanliness. A number of preparation grades and the degree of cleaning are specified. The preparation grades are defined by written descriptions of the surface appearance after the cleaning operation, together with representative photographic examples. SSPC standards The SSPC (Society for Protective Coatings) Standards are used for specifying the degree of cleanliness of steel surfaces. SSPC has standard definitions and photographs for common methods of cleaning.

ISO 8501-1 SSPC

BRUSH-OFF

COMMERICAL

NEAR WHITE METAL

WHITE METAL

SA 1 SP 7

SA 2 SP 6

SA 2.5 SP 10

SA 3 SP 5

STEEL BLASTERS

IDEAL FOR STEEL SURFACE PREPARATION Steel blasters will be rebranded to Husqvarna in 2023. Until then, the entire range will continue to be available under the Blastrac brand. Our sales, service and back-office teams support both brands. Blastrac has developed steel blasting machines for both horizontal and vertical applications. They are mainly used to prepare steel surfaces but also to remove coatings, rust and paint from these surfaces. After the steel blasting process, the surface is immediately ready for the application of a new coating.

STEEL SURFACE PREPARATION

SHIPYARD & SHIP REPAIR INDUSTRIES

OFFSHORE OIL AND GAS INDUSTRIES

STEEL PLATE INDUSTRIES

PETROCHEMICAL INDUSTRY

STEEL PIPE INDUSTRY

DUST COLLECTION FOR BLASTRAC PRODUCTS ON PAGE 99-100 95

STEEL BRIDGES AND DECKS

PREPARE/MAINTAIN HORIZONTAL AND VERTICAL STEEL SURFACES Blastrac steel blasting systems are very effective methods of removing paint, coatings, non-skid and other contaminants from steel surfaces. Blastrac steel blasting systems use steel shot or a mixture of angular steel grit and steel shot, allowing the operator to achieve a wide range of anchor patterns (surface profiles) and roughness needed for almost any type of coating application. Blasting with steel shot is an environmentally friendly abrasive blasting method, because there is no use of chemical products and no waste of valuable water.

MULTIPLE ABRASIVES The EBE machines use a mix of steel grit with steel shot to increase removal rates and create angular profile.

ELECTRIC STEEL BLASTERS Depending on the type of project and application, you can choose from a variety of electrical drive systems. Ask us for advice!

MODULAR CONSTRUCTION Blastrac 350E and 500E steel blasters can be disassembled into only a few parts. This enables the machine to be passed through a 23.6 in (600 mm) storage tank access hatch.

STEEL BLASTING

TECHNICAL SPECIFICATIONS

Product

350E

500E

Part Number

970554401

970554501

Working width, in (mm)

13.78" (350)

19.7" (500)

827 (375)

1,433 (650)

53 × 26 × 43 (1,346 × 660 × 1,092)

62 × 30 × 65 (1,575 × 762 × 1,651)

1-49 (1 – 15)

15 (11)

35 (26)

Weight, lbs (kg) Dimensions LxWxH, in (mm) Working speed, ft/min (m/min) Rated power. hp (kW) Required current, A Rated voltage, V

480

5 (127)

6 (150)

8 (<2.5)

Steel

BDC-66

BDC-99

Number of phases Dust hose connection, in (mm) Noise level, dB(A) Vibration emission, ft/s (m/s ) 2

Applications Recommended dust extractors

ABRASIVES A

Description

Part Number

350E

500E

900VMB

Abrasive S390

534065701

Abrasive S460

534063501

Abrasive S16

534067801

Abrasive S18

534065601

Abrasive S25

534063301

• • • • •

500E

900VMB

WHEEL KITS Description

Part Number

350E

Control Cage

533144801

• • • •

Impellor

533132101

Blades (x6)

533147201

Blastwheel

533360801

Control Cage

533147101

Impellor

533264301

Blades (x6)

533440901

Blastwheel

533151001

Blades (x6)

533187501

Control Cage

533211301

Blastwheel

533495401

Impellor bolts

533664501

Impellor bolts

533759801

•

• • • •

•

• • • • •

Product Part Number Working width, in (mm) Weight, lbs (kg) Dimensions LxWxH, in (mm) Working speed, ft/min (m/min) Rated power. hp (kW)

2-48DS

900VMB

970555001

970556107

48 (1,220)

35" (890)

2,976 (1,350)

1,874 (850)

95 × 56 × 57 (2,420 × 1,433 × 1,450)

35 × 63 × 53 (889 × 1,600 × 1,346)

3-108 (1-33)

1-33 (1 – 10)

2 × 35 (2 × 25)

2 × 35 (2 x 25)

Required current, A

100

480

2 × 6 (2 × 150)

6 (150)

Rated voltage, V Number of phases Dust hose connection, in (mm) Noise level, dB(A) Vibration emission, ft/s (m/s ) 2

Applications Recommended dust extractors

8 (<2.5)

Steel | Concrete | Asphalt

Steel

2-48DC

EbE-900DC

MAINTENANCE KITS G

Description

Part Number

350E

Maintenance Kit

533395601

•

Maintenance Kit

533329601

500E

900VMB

•

ACCESSORIES/OPTIONS H

Description

Part Number

Lowering lit

533974001

Mouth seal complete

533393301

Blast housing

531483201

350E

500E

900VMB

•

• •

BLASTRAC DUST EXTRACTORS

TECHNICAL SPECIFICATIONS

Product Part Number Rated power. hp (kW) Rated voltage, V Required current, A Number of phases Airflow, CFM Static pressure, in H20 (mm H20) Suction inlet diameter, in (mm) Number of HEPA filters Weight, lbs (kg) Dimensions LxWxH, in (mm)

BDC-22

BDC-23

BDC-33

BDC-44

970552901

970553001

970553003

970552702

970553201

2.7 (2)

5.4 (4)

7.4 (5.5)

110

230

14.5

200

300

350

882

101 (2,565)

108 (2,743)

24.5 (622)

2 (50)

2-3 (50-76)

3 (76)

3-5 (76-127)

110 (50)

157 (71)

410 (186)

655 (297)

24 × 24 × 48 (610 × 610 × 1,219)

31 × 24 × 62 (787 × 610 × 1,575)

53 × 28 × 67 (1,346 × 711 × 1,702)

51 × 26 × 53 (1,295 × 660 × 1,346)

2-48DC

EBE-900DC

970553301

970555701

24 (18)

23 (17)

480

125

1,700

1700

25 (635)

85 (2,159)

2 x 6 (2 x 51)

2,094 (950)

1,896 (860)

54 × 91 × 77 (1,371 × 2,311 × 1,956)

88 × 53 × 75 (2,235 × 1,346 × 1,905)

Product Part Number

BDC-66

BDC-99

970553101 (longopac)

970553102 (dust bin)

970552803 (longopac)

970552802 (dust bin)

7.4 (5.5)

10 (7.5)

230/480

480

22/11

Rated power. hp (kW) Rated voltage, V Required current, A Number of phases Airflow, CFM

1,294

1,561

20.5 (521)

26.1 (663)

5-6 (127-152)

6 (152)

1,014 (460)

1,146 (520)

68 × 30 × 65 (1,727 × 762 × 1,651)

68 × 34 × 65 (1,727 × 864 × 1,651)

Static pressure, in H20 (mm H20) Suction inlet diameter, in (mm) Number of HEPA filters Weight, lbs (kg) Dimensions LxWxH, in (mm)

ACCESSORIES / OPTIONS FOR DUST MANAGEMENT Description

Part Number

Dustbin conversion kit Dustbin conversion kit Floor tool Floor tool squeegee refills HEPA assembly kit HEPA assembly kit Longopac conversion kit Longopac conversion kit Longopac conversion kit Vacuum wand

533208901 533489501 533714601 534086501 533175201 533725401 533403701 533941101 534081601 534048001

BDC-22

BDC-23

BDC-33

BDC-44

BDC-66

BDC-99

•

• • •

• •

•

2-248DC

EBE-900DC

•

CONSUMABLES FOR DUST MANAGEMENT Description

Part Number

Dust bag Dust bag Longopac Primary star filter Primary star filter Primary cartridge filter Primary cartridge filter Replacement HEPA filter Replacement HEPA filter Replacement HEPA filter Replacement HEPA filter Replacement HEPA filter Replacement hose 2" x 25' Replacement hose 3" x 25' Replacement hose 3" x 65' Replacement hose 5" x 50' Replacement hose 6" x 50'

533467701 533993301 590429201 534033301 534039101 533969201 534053401 533551101 533968401 533898001 533757701 534008001 534018601 534075401 534078801 533945301 533976101

BDC-22

• •

•

BDC-23

•

BDC-33

•

• •

•

BDC-44

BDC-66

BDC-99

•

• •

•

• •

2-248DC

•

EBE-900DC

•

BMR-25

BMR-75

•

100

www.husqvarnacp.com Copyright © 2022 Husqvarna AB (publ). All rights reserved. Husqvarna and other product and feature marks are trademarks of the Husqvarna Group. We reserve the right to make changes in technology and specifications without prior notice.