Adjustments

EASY CLEAN WIPER

• Recommended to be cleaned before use, daily or any time of buildup. • Turn off tractor/telehandler. • Release both silver end latches of the wiper, let wiper panel slide open. • Remove excess material. • Close wiper by pulling bottom of wiper with one hand and pushing the top of wiper panel with other hand. (Keep fingers clear of pinch points). • Press both latches down into lock position.

ADJUSTING WIPER PANEL

• Wiper Panel must be set up as close to the top drum as possible. (this reduces any build-up in the wiper with sticky bales) • Remove front and rear plastic covers. • Loosen M16 bolts at both ends. • Slide wiper towards the top drum, to reduce the gap to a minimum. (keep fingers away from pinch points) • Retighten M16 bolts at both ends, (recommended torque 140Nm). • Latch must be down (locked) when resetting wiper position.