1 minute read
INTENDED USE OF THE DEVICE
The bale forks are foreseen for loading, unloading, moving from place to place, stacking bales and transporting them on closed company's area or farm.
The fork assembly to the vehicle is possible with the use of the following fastenings: TUZ I, TUZ II, TUZ III, EURO, SMS, ISO. The device performs perfectly well after being fitted on all frontal loaders of TUR type. The clamping system should be chosen in accordance with User Manual of the vehicle and the fork.
The working element of the fork are tines, that are built in the main frame, this connection should be often checked due to main point of working forces
The methods of operation are described on page 13, Forces acting of fork
Meeting the requirements concerning machine use, servicing and repairs in accordance with the manufacturer's recommendations and strict observance of them is the condition of intended use of the machine. The fork should be used, operated and repaired exclusively by the persons who know its characteristics and are familiarized with health and safety at work rules.
The manufacturer has a wide assortment of forks and other equipment facilitating transport in its offer . The manufacturer also offers specialist consultancy concerning the choice of suitable equipment for customer's needs.
All cases of lack of clarity concerning the machine intended use should be cleared with the fork manufacturer. Proper choice of the machine and awareness of its intended use will rise safety at work.