CHAINLESS LM104 MOUNTED CHAINLESS BALE FEEDERS The Hustler Chainless mounted square and round bale processor feeds every type of square or round bale. It’s been proven on more bale types than any other bale feeder and it minimises feed waste. The large bale chamber can handle up to 4’ wide round bales and all-size square bales (an optional platform extension might be required for more than 8’ long square bales). Ideal to be mounted at the back of a tractor on the 3-point hitch, the Chainless LM104 is so simple to use for operators of any skill level.
ADJUSTABLE PLATFORM
OPTIONAL EXTENSION
STRONGLY BUILT
The position of the new platform design is adjustable to suit any bale type you may need to feed out, from the worst of miss-shapen bales to the tightest-packed square bales, the Chainless LM104 handles them with ease.
Optional platform extension available for 8’ long square bales.
The Chainless LM104 is rated to handle 1,000 kg bales with ease.
OPTIONAL ENCLOSED CHAMBER Optional rear fence reduces the chance of hay falling out.
OPTIONAL SIDE CHUTE The Chainless side chute deflects the hay into a trough or bunk.
STRONGER DRIVE SYSTEM The new Drive Dog system utilizes two heavy-duty bearings instead of bushes, which lasts longer and can provides more rigidity.
EVEN FEED ROLLER OPTION Designed to break up the tightest of High-Density Square bales, the new Even Feed Roller attachment option allows any Chainless bale processor to feed out even more bales with consistency.
PROVEN ROTOR DESIGN Same new helix drums and Hypaflo wiper panel which have been well-proven on more than 110 different bale types.
LOAD YOUR CHAINLESS FEEDER WITHOUT THE NEED OF ANOTHER PIECE OF EQUIPMENT THANKS TO THE INTEGRATED TYNES
01 Lower feeder to the ground and drive away
02 Spear bale with tynes and position over feeder
03 Remove wrapping, and reconnect to feeder
SPECIFICATIONS
HUSTLEREQUIPMENT.COM
0800 487 853
BALE SIZES ROUND: Up to 4’ x 6’ BALE SIZES SQUARE: All sizes (over 6’ long requires optional platform extension) BALE WEIGHT: Up to 1000 kg UNIT WEIGHT: 640 kg
CAPACITY: 1 bale LENGTH: 1935 mm WIDTH: 2648 mm HEIGHT: 1271 mm
HYDRAULICS REQUIRED: 2 x double-acting, (30-60 L/min), 2250-3000 psi LOADING: Intergrated tynes TINES: 2 x forged high-tensile
CHAINLESS LM104