Wired Touchfeed Kit X Retro fit

Page 1

13/02/2018

SOP WIRED TOUCHFEED X RETRO-FIT CHX2400/CHX2500


TOUCHFEED X ASSY PAGE 1

1

Ensure the ram is fully retracted and not connected to an oil supply Remove the roll pin and pivot pin from the ram base clevis (red arrow) Remove hose block (white arrow) Lift torque arm up, free of the ram

2

Take note how the hoses are run and tied Remove all hoses from the bale feeder Remove adapters from the ram (red arrows) Leave the adapters on the motor

3

Fit the valve in place, ensure the U-bolt doesn't interfer with the latch hooks Fit the adapters to the valve

13/02/2018


TOUCHFEED X ASSY PAGE 2

4

Fit and tighten the restricted adapters to the ram, they have 1.2 marked on the side The dowty seal fits between the ram port and the adapter

5

Attach the 2 long 1/4" hoses to the valve ram ports, run them down through the motor guard and attach the ram base hose

6

Cable tie the hoses together near the ram pivot pin, ensure they're the same length Attach the other hose to the ram spear port

13/02/2018


TOUCHFEED X ASSY PAGE 3

7

Tighten the ram hoses with the looped hose angled out away from the machine at the top as shown

8

Lower the torque arm and refit the ram pin Tap the roll pin in place Cable tie the hoses to the torque arm Hoses should hang 100mm below motor guard, fit hose block in place

9

Fit the motor hoses to the valve Attach the other end to the motor, ensure

13/02/2018


TOUCHFEED X ASSY PAGE 4

13/02/2018

10

Fit the last 2 hoses to the valve Attach quick couplers to the other end

11

Attach to 12v power and oil supply Slowly extend the ram checking the hoses are not getting pinched, run the ram in and out a couple of times checking the hoses

HOSE ROUTE


TOUCHFEED X

5/02/2018

WIRED ITEM NO. Part Number 1 VALVE MOUNT 2 6 PORT DIVERTER 3 M14x160 U BOLT 4 M14 NYLOC NUT ZP 5 M14 WASHER HARDENED 6 M6x50mm 8.8 BOLT 7 M6 NYLOC NUT 8 HOSE KIT 9 ELECTRICS KIT (WIRED) 10 TOUCHFEED X COMPLETE WIRED KIT

Quantity 1 1 1 2 2 2 2 1 1 1

2

Part No. Comments 5005192 2002411 5105009 INCL. NUTS & WASHERS 9009260 9009324 9009151 9009256 2002411 9009553 7207113 INCL. ALL PARTS

7 5

6

4

3

1 9

8

1


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.