Page 1
Comby Range Comby, Super Comby, Super Comby EX
Parts & Operation Manual Issue 2
2011
Section 1-Manual Content Page No. 1 ©Design Copyright Robertson Manufacturing™
28/02/2011
Page 2
Introduction Dear Customer We take this opportunity of welcoming you as the owner of a Robertson Machine. We want your machine to be the most efficient and productive piece of equipment you have. This small manual will help you to achieve this objective. The correct parts and maintenance of your machine is very important to prevent downtime and equipment damage.
Important Notice This manual is based on the Super Comby EX, included in this manual are the parts that differ to the Comby and Super Comby machines. Where Super Comby EX is stated in this manual it is most likely that the instruction/part applies to the Comby and Super Comby also. If there is any doubt in the information you are looking for in this manual, please contact Robertson Manufacturing Ltd (033037228). Warranty Robertson warrants new products sold by us to be free from defects in material and workmanship twelve months after delivery to the initial user. This warranty is for the replacement or repair of any part found to be defective during the warranty period. This warranty excludes any freight cost incurred by the dealer in giving effect to the warranty and specifically excludes all normal maintenance costs. Replacement parts provided under the terms of this warranty are covered for the remainder of the warranty period applicable to the product in which they are installed as if such parts were original components of that product.
Tools Required For Maintaining Operation 1 1/2 Ring Spanner x2 30mm Ring Spanner x 2 24mm Ring Spanner x 2 19mm Ring Spanner 18mm Ring Spanner 13mm Ring Spanner Flexi Tube Grease Gun
Issue 2
2011
Section 1-Manual Content Page No. 2 ŠDesign Copyright Robertson Manufacturing™
28/02/2011
Page 3
Comby Range Table Of Content
Issue 2
Manual Section
Page
•
Introduction & Warranty
2
•
Table Of Content
3
•
Parts Ordering
4
•
Warnings & Manual Explanation
5
•
Machine Operation
6
•
Machine Adjustments
7
•
Hydraulic Hosing
1-Hosing Section
•
Greasing Chart
2- Wiring Section
•
Wiring Diagram
3-Greasing Section
•
Trouble Shooting
4-Trouble Section
•
Machine Assembly Parts
Section A
•
Fork Assembly Parts
Section B
•
Axle Assembly Parts
Section C
•
Extension Bin Assembly Parts
Section D
•
Comby Spread Assembly Parts
Section E
•
Grain Tank Assembly Parts
Section F
•
Lights
Section G
•
Hazard Panels
Section H
•
Feed Pad Kit
Section I
•
Amendments, Notes, PD & Warranty Registration
Last Page
2011
Section 1-Manual Content Page No. 3 ©Design Copyright Robertson Manufacturing™
28/02/2011
Page 4
Parts Ordering Information When ordering components from this manual please state the section letter and item number of the component required EG Section A-3 Item No 4. Also find the serial number on the machine which can be found on the drawbar chassis tag or on the X-Floor door.
A
DETAIL A Issue 2
2011
Section 1-Manual Content Page No. 4 ŠDesign Copyright Robertson Manufacturing™
28/02/2011
Page 5
IMPORTANT Due to Robertson's policy of continuous product improvement the information contained in this manual was correct from 01 February 2011. Any changes afterthe above date will only be included in the next update to this manual. Illustrations in this manual are pictorial representations of components and are not drawn to scale. WARNING: To operate this machine on the open road it must comply with the LTSA regulations. To operate this machine in other off road operations it must comply with farm safety regulations. Do not operate while standing in or close to the machine or moving parts. Do not make any adjustments while the machine is operating. Beware of surroundings when operating the machine to prevent injury to personnel & prevent damage to the machine.
Manual Layout
Section A
Section D
Section B
Section C
All parts balloons in this manual are as follows Top Number = Part Number Bottom Number = Quantity of part number components Issue 2
2011
A: B: C: D: E: F: G: H:
Machine Assembly (Section :A) Fork Assembly (Section :B) Axle Assembly (Section :C) Extension Bin Assembly (Section :D) Comby Spread Assembly (Section :E) Grain Tank Assembly (Section :F) Lights (Section :G) Hazard Panels (Section :H)
Section 1-Manual Content Page No. 5 ŠDesign Copyright Robertson Manufacturing™
28/02/2011
Page 6
OPERATION OF ROBERTSON SUPER COMBY EX 1. 2.
3. 4. 5. 6.
Connection of the Machine Connect Super Comby EX to tractor via drawbar, quick hitch or Euro hitch connection. Connect towing safety chains when required ( public road use) Clean hydraulic connectors and couple in to tractor in correct hydraulic banks. If your tractor has a priority system couple the Tilt/Fork hoses into hydraulic bank 1 and machine in to hydraulic bank 2. Connect electrics. Adjust tractor hydraulic oil flow rate to 60-80 litres per minute. Check direction of elevator rotation prior to feeding. Load feed material in to machine. Note when feeding silage material load the Cross Feed Chamber and Bed Storage Chamber separate to minimize knitting together of long material across the compartments .This decreases the pressure on the drives to separate the load when feeding out with the cross feed chamber.
Operating tip and tricks: 1. When loading bales with the fork assembly. Use an electric fence dropper mounted into a bale a few back to see where to line the bales up with the machine. 2. If bales don’t roll on to the bed chamber properly off the forks and become stuck in the gap, reverse the bed storage floor back carefully, this will straighten up the bale in to position. Do not: 1. Operate the X-Floor or the Bed Storage Floor in the backward direction with material in the machine. 2. Actuate the control levers backward and forwards to ‘free’ the load if the floor or elevator chains become jammed. As this can cause damage to drives and hydraulics. 3. Apply excessive pressure with fork/bin assembly when rising, while storage floor is fully loaded. 4. Overload the machine with material. 10 tonne the maximum capacity. 5. Use the elevator in the traveling position to feed out. Always extend the elevator out to feed. Note if the bed storage chain fails to move, extend the elevator fully so the rear flaps are out of the machine then retract into feeding position. 6. Ride on the drawbar 7. Water blast the load cell head unit or load cells or junction box. 8. Apply excessive material pressure on to elevator with XFloor load. 9. Weld on the machine with a load cell assembly, without first contacting Robertson Manufacturing Technical staff.
Issue 2
2011
Section 1-Manual Content Page No. 6 ©Design Copyright Robertson Manufacturing™
28/02/2011
Page 7
ADJUSTMENT OF THE BED STORAGE FLOOR CHAINS It is important to keep this machine adjusted correctly to get the best performance out of this machine and to reduce wear and tear on components resulting in less down time and broken components. Follow the short instruction below to correctly adjust the bed floor storage chain assemblies. 1. Check to see if the chains need to be adjusted 2. Tighten up Nut 1 whilst holding Nut 2 with a 24mm ring spanner until the floor slats are just sitting on the rear chain guides or contacting the chain guide 20 mm down on the front side (see drawing). Adjust Nut 1 at small intervals.
Nut 2 Nut 1
DETAIL B B
20 Issue 2
2011
Section 1-Manual Content Page No. 7 ŠDesign Copyright Robertson Manufacturing™
28/02/2011
Page 8
ADJUSTMENT OF THE ELEVATOR CHAINS It is important to keep this machine adjusted correctly to get the best performance out of this machine and to reduce wear and tear on components resulting in less down time and broken components. Follow the short instruction below to correctly adjust the bed floor storage chain assemblies. 1. Check to see if the chains need to be adjusted 2. Loosen off the bolts that clamp the elevator shaft cover to the elevator screen 3. Loosen off the 4 x M12 locking bolts on the Drive Shaft Idler Bearing 4. Loosen off Adjuster Lock Nuts 1 & 3 5. Adjust the chain tension adjuster Nuts 2 & 4 until the chain/slat is at the desired tension of 75mm total travel. Check that the drive shaft is close to parallel. 6. Tighten up Adjuster Lock Nuts 1 & 3. Tighten up the 4 x M12 locking bolts on the Drive Shaft Idler Bearing 7. Recheck elevator tension is still correct 8. Re-clamp elevator shaft cover so there is a minimum 5mm gap between the elevator slat and the elevator shaft cover.
Refer to drawings on next page for part locations
DO NOT OVER TENSION THE ELEVATOR & FLOOR CHAINS. DAMAGE & EXTENSIVE WEAR WILL OCCUR
Issue 2
2011
Section 1-Manual Content Page No. 8 ŠDesign Copyright Robertson Manufacturing™
28/02/2011
Page 9
Shaft Cover/Slat Chain Clearance 5mm
4 x Locking Bolts
Nut 1
Nut 2
Total Travel 75 mm
Nut 3
Issue 2
2011
Section 1-Manual Content Page No. 9 ©Design Copyright Robertson Manufacturing™
Nut 4
28/02/2011
Page 10
ADJUSTMENT OF THE X-FLOOR CHAINS It is important to keep this machine adjusted correctly to get the best performance out of this machine and to reduce wear and tear on components resulting in less down time and broken components. Follow the short instruction below to correctly adjust the bed floor storage chain assemblies. 1. Check to see if the chains need to be adjusted. 2. Loosen off the large Nut 1 locking nut. 3. Tighten up the large Nut 2 until the X-Floor slats are just sitting on the lower panel returns (see drawing). Adjust Nut 2 at small intervals and adjust both nuts at the same time to get an even chain tension on both sides. 4. Tighten up large Nut 1 to lock up the shaft idler shaft assembly. 5. Recheck chain tension is still correct.
Nut 1
Slat Just Touching Nut 2
Issue 2
2011
Section 1-Manual Content Page No. 10 ŠDesign Copyright Robertson Manufacturing™
28/02/2011
Page 11
Loaded Machine Bale Layout
Issue 2
2011
Section 1-Manual Content Page No. 11 ©Design Copyright Robertson Manufacturing™
28/02/2011
Page 12
Hosing Machine Manual Port 1
Port 2 Port 2
DETAIL A
A
C
B
Port 1
Port 2
Port 1
Port 2
DETAIL B Issue 2
2011
DETAIL C
Section 1-Hosing Section Page No. 1 ©Design Copyright Robertson Manufacturing™
28/02/2011
Page 13
Hosing Machine Manual Comby Standard Machine Fork Ram Elevator Motor C 8
C 5
C 3
C 4
Valves Top Upwards
C 7
Power Beyond Valve
C 9
6 Port Valve
C 6
X-Floor Motor
Issue 2
2011
C 2
C 1
To Tractor Remotes
Section 1-Hosing Section Page No. 2 ŠDesign Copyright Robertson Manufacturing™
28/02/2011
Page 14
Hosing Machine Manual Standard Machine Elevator Motor SCEX 5 SCEX 3 SCEX 9
Bed Motor
SCEX 4
Valves Top Upwards
SCEX 8 SCEX 7
Power Beyond Valve 6 Port Valve
SCEX 6
X-Floor Motor
Issue 2
2011
SCEX 2
SCEX 1
To Tractor Remotes
Section 1-Hosing Section Page No. 3 ©Design Copyright Robertson Manufacturing™
28/02/2011
Page 15
Hosing Machine Manual Standard Machine With Tilting Elevator Option Supply 1
Supply 2
To Tractor Remotes
TILT 3 TILT 2 TILT 1
TILT 6
TILT 4
TILT 5
Tilt Ram Front Tilt Ram Rear
Issue 2
2011
Section 1-Hosing Section Page No. 4 ©Design Copyright Robertson Manufacturing™
28/02/2011
Page 16
Hosing Machine Manual Standard Machine With Fork Option
Fork 2
Supply 2
To Tractor Remotes Supply 1
Fork Ram
Fork 1
Issue 2
2011
Section 1-Hosing Section Page No. 5 ©Design Copyright Robertson Manufacturing™
28/02/2011
Page 17
Hosing Machine Manual Standard With Tilting Elevator , Fork & Diverter Option Fork Ram
Fork 2
Fork 1
To Tractor Remote
Diverter Valve
Supply 1
Supply 2
Tilt 3
Tilt 2 Tilt 1
Tilt 6
Tilt 5
Tilt 4
Tilt Ram Front Issue 2
2011
Tilt Ram Rear
Section 1-Hosing Section Page No. 6 ©Design Copyright Robertson Manufacturing™
28/02/2011
Page 18
Hosing Machine Manual Standard Machine With Comby Spread/Grain Bin Option Elevator Motor 6 Port Power Beyond Valve
SCEX 5
SCEX 3 SCEX 9
Bed Motor SCEX 4
Valves Top Upwards
SCEX 8 CS 1
1/2 Nipple 6 Port Valve
SCEX 6
CS 2
SCEX 2 SCEX 1
SCEX 7 CS3 1
X-Floor Motor
To Tractor Remotes
Comby Spread Motor Issue 2
2011
CS4 1
Section 1-Hosing Section Page No. 7 ©Design Copyright Robertson Manufacturing™
Comby Spread/Grain Bin Valve 26/07/2012
Page 19
Wiring Details Manual Parts List Brown Black Purple Jumper 1
Yellow
Black Bed Back Rear Coil Brings Oil Out Rear Port
Bed Forward Front Coil Brings Oil Out Front Port
X-Floor Back
X-Floor Feed 7 Core Wire Grey Red
Purple Jumper 1
White Earth Jumper Purple
Green
Blue
Diverter Valve Plug Color 7 Core Black 7 Core White 7 Core Yellow 7 Core Brown 7 Core Red 7 Core Green 7 Core Blue
Issue 3, 2014
Operation Earth Return Earth Return Direction Bed Forward Direction Bed Backwards Direction X-Floor Backwards Direction X-Floor Feed Diverter Switch Control
Trailer Plug Pin Number Pin 5 Pin 3 Pin 1 Pin 7 Pin 6 Pin 4 Pin 2
Section 2-Wiring Page No. 1 ©Design Copyright Robertson Manufacturing™
22/02/2011
Page 20
Wiring Details Manual Parts List
Color 7 Core Black 7 Core White 7 Core Yellow 7 Core Brown 7 Core Red 7 Core Green 7 Core Blue
Issue 1
2008
Operation Earth Return Earth Return Direction Bed Forward Direction Bed Backwards Direction X-Floor Backwards Direction X-Floor Feed Diverter Switch Control
Trailer Plug Pin Number Pin 5 Pin 3 Pin 1 Pin 7 Pin 6 Pin 4 Pin 2
Section 2-Wiring Page No. 2 ©Design Copyright Robertson Manufacturing™
01/10/2008
Page 21
Wiring Details Manual Parts List
Wire 3.Green
Wire 3.Brown Wire 3.Blue Wire 7.Yellow
Wire 2.Red
Issue 1
2008
Wire 7.Green Wire 7.Red
Section 2-Wiring Page No. 3 ©Design Copyright Robertson Manufacturing™
01/10/2008
Page 22
Wiring Details Manual Parts List
Wire J5
Wire 1 Red
Wire J3
Wire J2 Wire J1 Wire J4 Wire J7 Wire 3 Green
Issue 1
2008
Section 2-Wiring Page No. 4 ©Design Copyright Robertson Manufacturing™
01/10/2008
Page 23
Wiring Details Manual Parts List Wire 1 Red
Wire 1 Black Wire 2.Black Wire 7.White
Wire 2.Red
Wire 7.Black
Wire 7.Brown
7 Core Cable
Wire 7.Green Wire 7.Yellow Wire 3.Blue 2 Core Cable Wire 3.Brown
3 Core Cable
Issue 1
2008
Section 2-Wiring Page No. 5 ©Design Copyright Robertson Manufacturing™
01/10/2008
Page 24
Wiring Details Manual Parts List Wire ID
From Component ID
Wire 1 Black Wire 1 Red Wire J1 Wire J2 Wire J3 Wire J4 Wire J5 Wire J6 Wire J7 Wire J8
Earth Joiner Heat Shrink Panel Mount Fuse Joystick Contact Switch Joystick Contact Switch Joystick Contact Switch SPST Normally Closed Center Light Contact Contact P9B10VN Center Light Contact Joystick Contact Switch
Wire 2.Black Wire 2.Red
6mm Crimp Eyelet 6mm Crimp Eyelet
Wire 3.Blue Duraplug 3 Pin Female Wire 3.Brown Duraplug 3 Pin Female Wire 3.Green Duraplug 3 Pin Female
Wire 7.Black Wire 7.Blue Wire 7.Brown Wire 7.Green Wire 7.Red Wire 7.White Wire 7.Yellow
Issue 1
2008
Earth Joiner Heat Shrink Contact P9B10VN Joystick Contact Switch Joystick Contact Switch Joystick Contact Switch Earth Joiner Heat Shrink Joystick Contact Switch
Section 2-Wiring
From Component Terminal
To Component ID
To Component Terminal
1 2 2a 2c 1a 1a 2b 4a 1c 1b
Center Light Contact Joystick Contact Switch Joystick Contact Switch Joystick Contact Switch Joystick Contact Switch Joystick Contact Switch SPST Normally Closed Center Light Contact Center Light Contact Contact P9B10VN
1c 3a 4c 1c 3c 4a 2b 1c 1c 3c
1 1
Earth Joiner Heat Shrink Panel Mount Fuse
a 1
N L Earth
SPST Normally Closed SPST Normally Closed Center Light Contact
2a 2c 1b
b 4c 3b 2b 4b c 1b
Female 7 Pin Trailer Plug Female 7 Pin Trailer Plug Female 7 Pin Trailer Plug Female 7 Pin Trailer Plug Female 7 Pin Trailer Plug Female 7 Pin Trailer Plug Female 7 Pin Trailer Plug
Page No. 6 ©Design Copyright Robertson Manufacturing™
5 2 7 4 6 3 1
01/10/2008
Page 25
Greasing Chart Manual
24
4 3 23 2 1
Issue 2
2011
Section 3-Greasing Section Page No. 1 ©Design Copyright Robertson Manufacturing™
22/02/2011
Page 26
Greasing Chart Manual
27
7 5 25
Issue 2
2011
6
26
8
Section 3-Greasing Section Page No. 2 ©Design Copyright Robertson Manufacturing™
28 9
22/02/2011
Page 27
Greasing Chart Manual
29 12
11 10
Issue 2
2011
Section 3-Greasing Section Page No. 3 ©Design Copyright Robertson Manufacturing™
22/02/2011
Page 28
Greasing Chart Manual
15
14 13
Issue 2
2011
Section 3-Greasing Section Page No. 4 ©Design Copyright Robertson Manufacturing™
22/02/2011
Page 29
Greasing Chart Manual
16
Issue 2
2011
Section 3-Greasing Section Page No. 5 ©Design Copyright Robertson Manufacturing™
22/02/2011
Page 30
Greasing Chart Manual
17
Issue 2
2011
Section 3-Greasing Section Page No. 6 ©Design Copyright Robertson Manufacturing™
22/02/2011
Page 31
Greasing Chart Manual
32
31
Issue 2
2011
Section 3-Greasing Section Page No. 7 ©Design Copyright Robertson Manufacturing™
22/02/2011
Page 32
Greasing Chart Manual
18 19 20 21
Issue 2
2011
Section 3-Greasing Section Page No. 8 ©Design Copyright Robertson Manufacturing™
22/02/2011
Page 33
Greasing Chart Manual
22
Issue 2
2011
Section 3-Greasing Section Page No. 9 ©Design Copyright Robertson Manufacturing™
22/02/2011
Page 34
Greasing Chart Manual Parts List Nipple Number Greasing Duration Manual Section 1 8 Hours A-1 2 4 Hours A-8-1 3 4 Hours A-8-1 4 8 Hours A-1 5 4 Hours A-18-8-1 6 4 Hours A-14 7 4 Hours A-4-3 8 4 Hours A-18-8-1 9 4 Hours A-9 10 8 Hours A-18-1 11 4 Hours A-10-4 12 8 Hours A-18-4 13 4 Hours A-10-4 14 8 Hours A-18-3 15 8 Hours A-10-1-1 16 4 Hours A-18-7-1 17 4 Hours A-4-2 18 8 Hours C-1 19 8 Hours C-1 20 8 Hours C-1 21 8 Hours C-1 22 8 Hours A-2-2 23 20 Hours A-7 24 20 Hours A-7 25 20 Hours A-18-6 26 20 Hours A-18-6 27 8 Hours A-5 28 8 Hours A-9-2
Comments
Remote Grease Nipple
Access Underside Of Gearbox
Waste Oil Waste Oil Waste Oil Waste Oil Waste Oil Waste Oil
Chains Chains Chains Chains Chains Chains
Servicing Wheel Bearings Wheel bearings have to be checked as part of the general maintenance of the machine, and be serviced when required. The time frame for this varies greatly depending on what conditions they are exposed to. Under normal circumstances once a year is adequate, but if the wheel bearings are exposed to water while in operation or other adverse conditions, the bearings will have to be serviced more frequently to avoid damage and down time. If damage has occurred due to lack of maintenance, warranty claims will de declined.
Issue 2
2011
Section 3-Greasing Section Page No. 10 ŠDesign Copyright Robertson Manufacturing™
22/02/2011
Page 35
Super Comby EX Trouble Shooting
Common Check Procedures Condition Of Tractor Hydraulics And Electrics Wiring On Drawbar Not Broken Is There Power To The System? Condition Of Plug-Socket Electrical Connection (Flare Contacts In Plug Socket With Small Screwdriver) Objects Jammed In Chains Or Chain Thrown Off Sprockets Including Reduction Boxes Is The Machine Plugged Into The Correct Electrical Plug On Tractor Is The Fuse Working? Electrical Vs Hydraulic Failure Before Undertaking Testing Make Sure That The Tractor Is Running At The Following Specifications
Dead Head Pressure 2500psi – 3000psi Oil Flow 60-80 Litres Per Min Quick Diagnose 1. Do Hoses Move When Joystick Activated? (No, Electrical Failure) (Yes, Hydraulic) 2. Swap Coils On Valve Block Banks (Yes, But Controls Backwards, Hydraulic Failure) 3. Pressing Overriding Buttons On Valve Spool Ends (Yes, Electrical) (No, Hydraulic) Checking The Condition Of Hydraulic Motors 1. Remove Motor Tank Hose (Motor Low Pressure Side) 2. Supply Oil To Motor Result Large Oil Flow Without Tractor Working Hard To Supply Oil, Motor Damaged. Minimal Oil Flow While Tractor Working Hard. Motors Good, Look For Jam Up Of Drive.
Load Cell Fault Finding
Check For Mechanical Damage To Cells Check For Objects Jamming Cells Check For Loose Bolts Check To See If Machine Has Had Welding Repairs Check Wiring Check For Water Damage In Junction Box Check For Water Damage In Plugs Check Head Unit Calibration (See Manual) Check To See That Battery Hasn’t Been Charged With Power Supply To Head Unit Attached For More Information On Checking Load Cells Contact Robertson Manufacturing
Issue 1
2008
Section 4-Trouble Shooting Page No. 1 ©Design Copyright Robertson Manufacturing™
29/09/2008
Page 36
Page 37
Main Chassis Assembly Manual
Issue 2
2011
Section A-1 Page No. 1 ©Design Copyright Robertson Manufacturing™
28/02/2011
Page 38
Main Chassis Assembly Manual 7 1 9 1
1 2
5 1 6 1
16 1
A 13 1 10 1
DETAIL A
1 2 15 1 Issue 2
2011
14 1
Top Number = Item Number Bottom Number = Quantity
Section A-1 Page No. 2 ©Design Copyright Robertson Manufacturing™
28/02/2011
Page 39
Main Chassis Assembly Manual 7 1
22 1
23 1
2 2 24 1
12 1
18 1
11 1 19 1
17 1
2 1
8 1
Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
21 1
20 1
Section A-1 Page No. 3 ©Design Copyright Robertson Manufacturing™
28/02/2011
Page 40
Main Chassis Assembly Manual
B
4 4
3 2
DETAIL B Issue 2
2011
Section A-1 Page No. 4 ©Design Copyright Robertson Manufacturing™
28/02/2011
Page 41
Main Chassis Assembly Manual Parts List Item Number
Quantity
7
1
8 9
1 1
10 11 12
1 1 1
13
1
14 15 16
1 1 1
17
1
18
1
19 20 21
1 1 1
22 23 24
1 1 1
1 2 3 4 5 6
Issue 2
2011
2 2 2 4 1 1
Part Name
Manual Section
Yellow Dashes 550mm x 100mm Left Bin Side Sticker Assembly 1/4 Grease Nipple Straight Fork Pivot X-Lube Bush Elevator Assembly Rev 2 A-10 Tilting Elevator Hose Tee A-11 Assembly Fine Mesh Silage Door Assembly A-12 Pillow Block Mount Assembly Rear X-Floor Panel Rubber Flap Assembly Joystick Valve Control Assembly X-Floor Assembly Load Cell Drawbar Top Cover Assembly Load Cell Towing Eye 50mm Swivel Weld On Assembly Spec's Chassis Tag Assembly Adaptor Hose Mount Assembly Load Cell Junction Box Rev-002 Assembly Load Cell Drawbar Lower Cover Swivel Assembly Bed Drive Box Chain Cover Assembly Bed Drive Shaft Assembly Bed Final Drive Chain Assembly Bed Final Drive Chain Cover Assembly Bed Floor Chain Assembly Bed Idler Shaft Assembly Bed Reduction Box Assembly
Comments
A-14 A-15 A-17 A18 A-19 A-2 A-20 A-21 A-22 A-23 A-3 A-4 A-5 A-6 A-7 A-8 A-9
Section A-1 Page No. 5 ©Design Copyright Robertson Manufacturing™
28/02/2011
Page 42
Load Cell Towing 40mm Weld On Assembly Manual 4 8
1 3
10 4
16 18
2 3
3 8 15 2 18 1
9 4
11 1
13 2
5 1
7 4 8 2
14 10
6 1
12 2
19 1
11 1
17 1 Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Section A-2 Page No. 1 ©Design Copyright Robertson Manufacturing™
23/02/2011
Page 43
Load Cell Towing 40mm Weld On Assembly Manual Parts List
Issue 2
Item Number
Quantity
1
3
M12 x 1.75 Nut
2
3
M12 x 35 x 1.75 HT Bolt
3
8
M16 x 60 x 2.00 HT Bolt
4
8
M16 x 40 x 2.00 HT Bolt
5
1
Cat 1 Lower Link Pin
6
1
AG 3 Linch Pin 12 mm
7
4
16mm Flat Washer
8
2
M16 x 45 x 2.00 HT Bolt
9
4
M18 x 100 x 2.5 HT Bolt
10
4
M18 x 2.5 Nylock Nut
11
1
Towing eye Frame Assembly
12
2
Long End Load Cell Casting
13
2
Short End Load Cell Casting
14
10
M16 x 2.00 Nut
15
2
54mm Load Cell Bar
16
18
16mm Spring Washer
17
1
Safety Chain 13mm Assembly
A-16
18
1
7 Pin Plug Holder Assembly
A-2-1
19
1
Robertson Jack Assembly
A-2-2
2011
Part Name
Manual Section
Comments
Rev 002
Section A-2 Page No. 2 ©Design Copyright Robertson Manufacturing™
23/02/2011
Page 44
Load Cell Towing 50mm Bolt On Assembly Manual 17 8 11 4
18 3
13 4 16 2
4 3
1 1
19 2
10 4
15 2
7 1
2 1 22 1
8 4 6 4 14 1 9 10
3 2
5 4
12 18
21 1
23 1
Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Section A-2 Page No. 1 ©Design Copyright Robertson Manufacturing™
23/02/2011
Page 45
Load Cell Towing 50mm Bolt On Assembly Manual Parts List
Issue 2
Item Number
Quantity
1
1
Cat 1 Lower Link Pin
2
1
AG 3 Linch Pin 12 mm
3
2
M16 x 45 x 2.00 HT Bolt
4
3
M12 x 35 x 1.75 HT Bolt
5
4
16mm Flat Washer
6
4
M20 x 2.50 Nut
7
1
40mm Bolt On Draw Bar Tounge
8
4
20mm Spring Washer
2011
Part Name
Manual Section
9
10
M16 x 2.00 Nut
10
4
M20 x 90 x 2.50 HT Bolt
11
4
M18 x 2.5 Nylock Nut
12
18
16mm Spring Washer
13
4
M18 x 100 x 2.5 HT Bolt
14
1
Towing Eye Bolt On Frame
15
2
Long End Load Cell Casting
16
2
54mm Load Cell Bar
17
8
M16 x 40 x 2.00 HT Bolt
18
3
M12 x 1.75 Nut
19
2
Short End Load Cell Casting
20*
8
M16 x 60 x 2.00 HT Bolt
21
1
Safety Chain 13mm Assembly
A-16
22
1
7 Pin Plug Holder Assembly
A-2-1
23
1
Robertson Jack Assembly
A-2-2
Comments
Rev 002
Section A-2 Page No. 2 ©Design Copyright Robertson Manufacturing™
23/02/2011
Page 46
Load Cell Towing 50mm Swivel Assembly Manual 7 3
14 4
8 3
3 2 15 2 5 1
6 2
18 1
11 2 9 10 1 4
8 3
2 18
16 1
4 1
17 1
Issue 2
2011
19 1
Top Number = Item Number Bottom Number = Quantity
Section A-2 Page No. 1 ©Design Copyright Robertson Manufacturing™
23/02/2011
Page 47
Load Cell Towing 50mm Swivel Assembly Manual Parts List
Issue 2
Item Number
Quantity
1
4
16mm Flat Washer
2
18
16mm Spring Washer
3
2
54mm Load Cell Bar
4
1
AG 3 Linch Pin 12 mm
5
1
Cat 1 Lower Link Pin
6
2
Long End Load Cell Casting
7
3
M12 x 1.75 Nut
8
3
M12 x 35 x 1.75 HT Bolt
9
10
M16 x 2.00 Nut
10
8
M16 x 40 x 2.00 HT Bolt
11
2
M16 x 45 x 2.00 HT Bolt
12
8
M16 x 60 x 2.00 HT Bolt
13
4
M18 x 100 x 2.5 HT Bolt
14
4
M18 x 2.5 Nylock Nut
15
2
Short End Load Cell Casting
16
1
Towing Eye Frame 50mm Swivel Towing Eye Frame
17
1
Safety Chain 13mm Assembly
A-16
18
1
7 Pin Plug Holder Assembly
A-2-1
19
1
Robertson Jack Assembly
A-2-2
2011
Part Name
Manual Section
Comments
Rev 002
Section A-2 Page No. 2 ©Design Copyright Robertson Manufacturing™
23/02/2011
Page 48
Page 49
7 Pin Plug Holder Assembly Manual Parts List Item Number
Quantity
Part Name
1
1
Female 7 Pin Trailer Flat Plug Assembly
2
2
M5 x 25 x 0.80 HT Bolt & Nut
3
2
M5 x 0.80 Nut
Manual Section
Comments
Top Number = Item Number Bottom Number = Quantity
3 2
1 1
2 2
Issue 2
2011
Section A-2-1 Page No. 1 ©Design Copyright Robertson Manufacturing™
4/09/2009
Page 50
Robertson Jack Assembly Manual Parts List 13 1
7 1 8 1 9 1
6 1
10 1
5 1 12 1 11 1
2 1
3 1
14 1
4 1
1 1
Top Number = Item Number Bottom Number = Quantity Issue 2
2011
Section A-2-2 Page No. 1 ©Design Copyright Robertson Manufacturing™
21/09/2010
Page 51
Robertson Jack Assembly Manual Parts List
Issue 2
Item Number
Quantity
1
1
Outer Leg Frame
2
1
Thread Frame
3
1
Main Lift Nut
4
1
Inner Leg Frame
5
1
20mm Light Flat Washer
6
1
Jack Handle
7
1
Slip On Handle
8
1
M6 x 45 x 1.00 HT Bolt
9
1
M6 x 1.00 Nylock Nut
10
1
M8 x 20 x 1.25 HT Bolt
11
1
M8 x 1.25 Nut
12
1
1/4 Grease Nipple Straight
13
1
Thrust Bearing Assembly
14
1
Grease Point Sticker
2011
Part Name
Manual Section
Section A-2-2 Page No. 2 ©Design Copyright Robertson Manufacturing™
Comments
21/09/2010
Page 52
Bed Drive Box Chain Cover Assembly Manual Parts List
1 1
2 2
3 2
Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
Part Name
1
1
Bed Reduction Box Chain Cover Frame
2
2
12mm Spring Washer
3
2
M12 x 25 x 1.75 HT Bolt
Manual Section
Section A-3 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
22/02/2011
Page 53
Super Comby Bed Drive Shaft Assembly Manual Parts List
2 1
3 2
1 2
5 1
4 1
Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
Part Name
Manual Section
1
2
1/2 x 1/2 x 90 Keysteel
2
1
Bed Drive Shaft
3
2
5 Tooth Sprocket Assembly
4
1
Drive Shaft Idler Flange Plate Assembly A-4-2
5
1
Shaft Support Assembly
Comments
A-4-1 A-4-3
Section A-4 Page No. 1 ©Design Copyright Robertson Manufacturing™
22/02/2011
Page 54
Super Comby EX Bed Drive Shaft Assembly Manual Parts List 3 2
5 1 6 1
9 1
2 2 1 1
4 1
Top Number = Item Number Bottom Number = Quantity
7 2 8 1
Issue 2
2011
Item Number
Quantity
Part Name
Manual Section
1
1
1/2 x 1/2 x 65 Keysteel
2
2
1/2 x 1/2 x 90 Keysteel
3
2
3/8 x 1 UNC Grubscrew
4
1
Bed Drive Shaft
5
1
Bed Drive Shaft Duplex Sprocket
6
1
Bed Drive Shaft Sprocket Spacer
7
2
5 Tooth Sprocket Assembly
8
1
Drive Shaft Idler Flange Plate Assembly A-4-2
9
1
Drive Shaft Sprocket Support Flange Plate Assembly
Comments
A-4-1 A-4-3
Section A-4 Page No. 1 ©Design Copyright Robertson Manufacturing™
24/02/2011
Page 55
5 Tooth Sprocket Assembly Manual Parts List
2 2
1 1
Top Number = Item Number Bottom Number = Quantity
Item Number
Quantity
1
1
Bed Drive Shaft Sprocket
Part Name
2
2
3/8 x 3/8 Grubscrew
Manual Section
Comments
Note: There are 2 assemblies per machine Issue 2
2011
Section A-4-1 Page No. 1 ©Design Copyright Robertson Manufacturing™
22/02/2011
Page 56
Drive Shaft Idler Flange Plate Assembly Manual Parts List 2 1
3 4
4 4
6 1 1 1
5 4 Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
1
1
Drive Shaft Idler Flange Plate Frame
Part Name
2
1
Drive Shaft Idler Bush
3
4
M12 x 40 x 1.75 HT Bolt
4
4
12mm Spring Washer
5
4
M12 x 1.75 Nut
6
1
1/4 Grease Nipple 90 Deg
Manual Section
Section A-4-2 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments Requires Machining After Fitting
22/02/2011
Page 57
Super Comby Shaft Support Assembly Manual Parts List
1 1
3 1
Top Number = Item Number Bottom Number = Quantity
2 1
Issue 2
2011
Item Number
Quantity
1
1
Shaft Support Frame
Part Name
2
1
1.5 x 1.75 X-Lube Bush
3
1
1/4 Grease Nipple Straight
Manual Section
Section A-4-3 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
22/02/2011
Page 58
Drive Shaft Sprocket Support Flange Plate Assembly Manual Parts List 3 4
1 1
4 4
7 1
6 1
5 4
2 1
Issue 2
Top Number = Item Number Bottom Number = Quantity
Item Number
Quantity
1
1
Sprocket Support Flange Plate Frame
2
1
Drive Shaft Sprocket Support Bush
3
4
M12 x 40 x 1.75 HT Bolt
4
4
12mm Spring Washer
5
4
M12 x 1.75 Nut
6
1
1/4 Unc Male - 1/8 BSPP Female 90 Deg Adaptor
7
1
1/8 BSPT Male - 6mm Olive Adaptor
2011
Part Name
Manual Section
Section A-4-3 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments Requiers Machining After Fitting
22/02/2011
Page 59
Bed Final Drive Chain Assembly Manual Parts List
1 1 2 1
Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
Part Name
1
1
Bed Final Drive Chain Frame
2
1
RC 60 Duplex Chain Joiner
Manual Section
Section A-5 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
22/02/2011
Page 60
Bed Final Drive Chain Cover Assembly Manual Parts List
3 4
1 1
2 4
Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
Part Name
1
1
Bed Final Drive Chain Cover
2
4
12mm Flat Washer
3
4
4mm R Clip
Manual Section
Section A-6 Page No. 1 ŠDesign Copyright Robertson Manufacturing™
Comments
22/02/2011
Page 61
Super Comby Bed Floor Chain NZ Machine Assembly Manual Parts List
A
3 11
2 2
DETAIL A
1 2
Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
1
2
Bed Floor Link Chain Frame
Part Name
2
2
10mm Cal-Chain Joiner Assembly
3
11
Manual Section
Comments Includes Bolt & Nut
50 x 50 Bed Floor Slat 3mm NZ Machine
Section A-7 Page No. 1 ©Design Copyright Robertson Manufacturing™
22/02/2011
Page 62
Super Comby EX Bed Floor Chain Assembly Manual Parts List
A 2 2 3 16 1 2
DETAIL A Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
Part Name
1
2
X-Floor Link Chain Frame
2
2
10mm Cal-Chain Joiner Assembly
3
16
50 x 50 Bed Floor Slat
Manual Section
Section A-7 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments Includes Bolt & Nut
22/02/2011
Page 63
Super Comby Bed Floor Chain Export Machine Assembly Manual Parts List 1 2
A 3 11
DETAIL A
2 2
Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
Part Name
1
2
Bed Floor Link Chain Frame
2
2
10mm Cal-Chain Joiner Assembly
3
11
50 x 50 Bed Floor Slat 4mm Export Machine
Manual Section
Section A-7 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments Includes Bolt & Nut
22/02/2011
Page 64
Bed Idler Shaft Assembly Manual Parts List 2 2
1 1
3 2 4 2
Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
1
1
Bed Idler Shaft
Part Name
2
2
M16 x 2.00 Nylock Nut
3
2
Shaft Adjuster Frame
4
2
Bed Idler Sprocket Assembly
Manual Section
Comments
A-8-1
Section A-8 Page No. 1 ©Design Copyright Robertson Manufacturing™
22/02/2011
Page 65
Bed Idler Sprocket Assembly Manual Parts List
3 1
5 1 2 1
4 1
1 1 Top Number = Item Number Bottom Number = Quantity
Item Number
Quantity
Part Name
1
1
Bed Idler Sprocket
2
1
1.5 x 1.75 X-Lube Bush
3
1
1/4 Grease Nipple Straight
4
1
Grease Point Sticker
5
1
Sprocket Spacer
Manual Section
Comments
Note: There are 2 assemblies per machine Issue 2
2011
Section A-8-1 Page No. 1 ©Design Copyright Robertson Manufacturing™
22/02/2011
Page 66
Super Comby Bed Reduction Box Assembly Manual Parts List 1 2
4 4
2 2 12 1
5 1 8 1
11 4
13 1
10 1
14 1 17 1
7 1 6 2
16 1 15 1 9 1 3 2
Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Section A-9 Page No. 1 ©Design Copyright Robertson Manufacturing™
22/02/2011
Page 67
Super Comby Bed Reduction Box Assembly Manual Parts List
Issue 2
Item Number
Quantity
1
2
1/2 Dowty Seal
2
2
1/2 Parallel Male - 1/2 Parallel Male Nipple
3
2
10mm Flat Washer
4
4
12mm Spring Washer
5
1
16mm Spring Washer
6
2
4mm R Clip
7
1
Bed Drive Gearbox Frame
8
1
Bed Gearbox Adjuster
9
1
Bed Gearbox Cover Frame
10
1
Danfoss OMH 500 Motor
11
4
M12 x 35 x 1.75 HT Bolt
12
1
M16 x 2.00 Nut
13
1
M16 x 55 x 2.00 HT Bolt
14
1
13 Tooth Motor Sprocket Assembly
A-9-1
15
1
Reduction Chain Assembly
A-9-2
16
1
27 Tooth Drive Shaft Sprocket Assembly
A-9-3
17
1
Gearbox Mount Assembly
A-9-4
2011
Part Name
Manual Section
Section A-9 Page No. 2 ©Design Copyright Robertson Manufacturing™
Comments
22/02/2011
Page 68
Super Comby EX Bed Reduction Box Assembly Manual 10 1
2 2
13 3 8 1
1 2 4 4
17 1 16 1 3 1
Top Number = Item Number Bottom Number = Quantity
15 1
18 1
6 1
4 4
10 1
9 1
14 1
17 1
11 1
8 1
13 3
5 5
5 5
18 1
7 2 15 1
5 5
3 1
12 4 Issue 2
2011
4 4
11 1
16 1
13 3
Section A-9 Page No. 1 ©Design Copyright Robertson Manufacturing™
5 5
7 2
24/02/2011
Page 69
Super Comby EX Bed Reduction Box Assembly Manual Parts List
Issue 2
2011
Item Number
Quantity
Part Name
Manual Section
1
2
1/2 Dowty Seal
2
2
1/2 Taper Male -1/2 Swivel 90 Deg Adaptor
3
1
1/8 BSPT Grease Nipple Straight
4
4
12mm Spring Washer
5
5
16mm Heavy Flat Washer
6
1
16mm Spring Washer
7
2
Adjuster Bolt Assembly
8
1
Bed Reduction Box Frame
9
1
Chain Adjuster
10
1
Chain Adjuster Bolt Frame
11
1
Danfoss OMH 500 Motor
12
4
M12 x 35 x 1.75 HT Bolt
13
3
M16 x 2.00 Nut
14
1
M16 x 40 x 2.00 HT Bolt
15
1
Reduction Pin
16
1
13 Tooth Motor Sprocket Assembly
A-9-1
17
1
Bed Reduction Box Chain Assembly
A-9-2
18
1
Bed Reduction Sprocket Assembly
A-9-3
Section A-9 Page No. 2 ©Design Copyright Robertson Manufacturing™
Comments
24/02/2011
Page 70
13 Tooth Motor Sprocket Assembly Manual Parts List
2 2
1 1
Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
Part Name
1
1
13 Tooth x 3/4 Pitch x 35 Bore x 10x8 Key Sprocket
2
2
3/8 x 3/4 Grubscrew
Manual Section
Section A-9-1 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
22/02/2011
Page 71
Bed Reduction Box Chain Assembly Manual Parts List 1 1
2 1
Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
1
1
Bed Reduction Box Chain Frame
Part Name
2
1
3/4 HV Joiner Link
Manual Section
Section A-9-2 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
22/02/2011
Page 72
27 Tooth Drive Shaft Sprocket Assembly Manual Parts List
1 1
2 1
3 2
Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
Part Name
1
1
27 Tooth x 3/4 Pitch x 1.5 Bore x 3/8 Key Sprocket
2
1
1/2 x 1/2 x 65 Keysteel
3
2
3/8" x 1" UNC Grubscrew
Manual Section
Section A-9-3 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
22/02/2011
Page 73
Super Comby EX Bed Reduction Sprocket Assembly Manual Parts List 1 1
2 1
Top Number = Item Number Bottom Number = Quantity
Issue 2
Item Number
Quantity
1
1
Bed Reduction Sprocket Frame
2
1
FB 1016 Bronze Bush
2011
Part Name
Manual Section
Section A-9-3 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments Requires Machining After Fitting
22/02/2011
Page 74
Super Comby Gearbox Mount Assembly Manual Parts List 2 1
7 1
6 1
4 1 8 4 5 5 3 1
Issue 2
1 1
Item Number
Quantity
1
1
Gearbox Mount Frame
2
1
1.5 x 1.75 X-Lube Bush
3
1
FB 1014 Bronze Bush
4
1
1/4 Grease Nipple 90 Deg
5
5
12mm Spring Washer
6
1
M12 x 1.75 Nut
7
1
M12 x 40 x 1.75 HT Bolt
8
4
M12 x 25 x 1.75 HT Bolt
2011
Part Name
Top Number = Item Number Bottom Number = Quantity
Manual Section
Section A-9-4 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
1.75 by 1.5 @ 3.5" long
22/02/2011
Page 75
Elevator Assembly Rev 2 Manual
10 1
16 1
9 1 1 2
8 1
15 1
2 2
13 2
6 4 12 2
14 2
5 4
11 1
4 4
Issue 2
2011
Section A-10 Page No. 1 ©Design Copyright Robertson Manufacturing™
24/02/2011
Page 76
Elevator Assembly Rev 2 Manual
9 1
16 1
10 1 11 1
1 2
8 1
A 2 2 6 4
7 2
12 2 13 2
3 2
5 4 13 2
15 1
4 4 12 2
DETAIL A Issue 2
2011
Section A-10 Page No. 2 ©Design Copyright Robertson Manufacturing™
24/02/2011
Page 77
Elevator Assembly Rev 2 Manual Parts List
Issue 2
Item Number
Quantity
1
2
M12 x 30 x 1.75 HT Bolt
2
2
M12 x 40 x 1.75 Coach Bolt
3
2
M12 x 1.75 Nylock Nut
4
4
M12 x 1.75 Nut
5
4
12mm Spring Washer
6
4
12mm Flat Washer
7
2
M12 x 75 x 1.75 HT Bolt
8
1
Elevator Frame
2011
Part Name
Manual Section
9
1
Elevator Drive Shaft Assembly
A-10-1
10
1
Elevator Drive Shaft Cover Assemby
A-10-2
11
1
Elevator Chain Assembly
A-10-3
12
2
Elevator Idler Shaft Assembly
A-10-4
13
2
Elevator Idler Sprocket Assembly
A-10-5
14
2
Elevator Nylon Strip Assembly
A-10-6
15
1
Tilting Evevator Ram Front Assemby
A-10-7
16
1
Tilting Evevator Ram Rear Assemby
A-10-8
Section A-10 Page No. 3 ©Design Copyright Robertson Manufacturing™
Comments
24/02/2011
Page 78
Elevator Drive Shaft Assembly Manual Parts List 5 1
1 1
4 1
7 1 8 1
2 1
6 1
3 1 Top Number = Item Number Bottom Number = Quantity
Issue 2
Item Number
Quantity
1
1
Drive Shaft
2
1
Idler Sprocket Key
3
1
Motor End Key
4
1
Elevator Drive Idler Adjuster Assembly
A-10-1-1
5
1
Elevator Drive Idler Sprocket Assembly
A-10-1-2
6
1
Elevator Motor Adjuster Assembly
A-10-1-3
7
1
Elevator Motor Coupling Sprocket Assembly
A-10-1-4
8
1
Elevator Motor Mount Assembly
A-10-1-5
2011
Part Name
Manual Section
Section A-10-1 Page No. 1 ŠDesign Copyright Robertson Manufacturing™
Comments
24/02/2011
Page 79
Elevator Drive Idler Adjuster Assembly Manual Parts List 1 1
3 1
5 4
4 2
6 4
3 1
2 2
Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
Part Name
1
1
Bearing Mount Frame
2
2
M16 x 2.00 Nut
3
1
208-108 Assembly
4
2
Bearing Retainer
5
4
12mm Spring Washer
6
4
M12 x 40 x 1.75 HT Bolt
Manual Section
Section A-10-1-1 Page No. 1 ŠDesign Copyright Robertson Manufacturing™
Comments
22/02/2011
Page 80
Elevator Drive Idler Sprocket Assembly Manual Parts List 3 1
1 1
2 1
Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
Part Name
1
1
Drive Idler Sprocket
2
1
3/8 x 3/8 Grubscrew
3
1
3/8 x 3/4 Grubscrew
Manual Section
Section A-10-1-2 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
22/02/2011
Page 81
Elevator Motor Adjuster Assembly Manual Parts List
2 2
1 1 Top Number = Item Number Bottom Number = Quantity
Issue 2
Item Number
Quantity
1
1
Motor Adjuster Frame
2
2
M20 x 2.50 Nut
2011
Part Name
Manual Section
Section A-10-1-3 Page No. 1 ŠDesign Copyright Robertson Manufacturing™
Comments
22/02/2011
Page 82
Elevator Motor Coupling Sprocket Assembly Manual Parts List 3 2
1 1
2 2 Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
Part Name
1
1
Coupling Sprocket
2
2
3/8 x 3/4 Grubscrew
3
2
3/8 x 1 UNC Grubscrew
Manual Section
Section A-10-1-4 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
22/02/2011
Page 83
Elevator Motor Mount Assembly Manual Parts List 1 1
2 1 5 4 6 4
3 2
4 2
Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
1
1
Motor Mount Frame
Part Name
2
1
Danfoss OMH 400 Motor
3
2
1/2 Dowty Seal
4
2
1/2 Parallel Male - 1/2 Parallel Male Nipple
5
4
12mm Spring Washer
6
4
M12 x 30 x 1.75 HT Bolt
Manual Section
Section A-10-1-5 Page No. 1 ŠDesign Copyright Robertson Manufacturing™
Comments Danfoss
22/02/2011
Page 84
Elevator Drive Shaft Cover Assemby Manual Parts List
4 4
3 4
1 1
2 4
Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
1
1
Elevator Top Shaft Cover Rev-1
Part Name
2
4
M10 x 25 x 1.5 Pan Head Bolt
3
4
10mm Flat Washer
4
4
M10 x 1.5 Nylock Nut
Manual Section
Section A-10-2 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
24/02/2011
Page 85
Elevator Chain Assembly Manual Parts List
2 9
1 2
3 2
Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
Part Name
1
2
Roller Chain Frame
2
9
Elevator Slat Frame
3
2
3 Inch Roller Chain Joiner Link
Manual Section
Section A-10-3 Page No. 1 ŠDesign Copyright Robertson Manufacturing™
Comments
22/02/2011
Page 86
Elevator Idler Shaft Assembly Manual Parts List
2 1
1 1
Top Number = Item Number Bottom Number = Quantity
Item Number
Quantity
1
1
Idler Shaft
Part Name
2
1
1/8 BSPT Grease Nipple Straight
Manual Section
Comments
Note: There are 2 assemblies per machine Issue 2
2011
Section A-10-4 Page No. 1 ©Design Copyright Robertson Manufacturing™
22/02/2011
Page 87
Elevator Idler Sprocket Assembly Manual Parts List 1 1
2 1
Top Number = Item Number Bottom Number = Quantity
Item Number
Quantity
Part Name
1
1
Idler Sprocket
2
1
1.5 x 1.75 X-Lube Bush
Manual Section
Comments
Note: There are 2 assemblies per machine Issue 2
2011
Section A-10-5 Page No. 1 ŠDesign Copyright Robertson Manufacturing™
22/02/2011
Page 88
Elevator Nylon Strip Assembly Manual Parts List
1 1 2 4
3 4 5 4
4 4
Top Number = Item Number Bottom Number = Quantity
Item Number
Quantity
1
1
Elevator Nylon Strips
Part Name
2
4
M6 x 20 Countersunk Bolt
3
4
6mm Panel Washer
4
4
6mm Spring Washer
5
4
M6 x 1.00 Nut
Manual Section
Comments
Note: There are 2 assemblies per machine Issue 2
2011
Section A-10-6 Page No. 1 ŠDesign Copyright Robertson Manufacturing™
22/02/2011
Page 89
Tilting Elevator Ram Front Assemby Manual Parts List
4 1
5 2 2 1 1 1
3 2 Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
Part Name
1
1
20-20 Ram Assembly
2
1
Pivot Pin 2 Frame
3
2
4mm R Clip
4
1
Pivot Pin 1 Frame
5
2
3/8 Tapered Male - 3/8 Tapered Male Nipple
Manual Section
Section A-10-7 Page No. 1 ŠDesign Copyright Robertson Manufacturing™
Comments
22/02/2011
Page 90
Tilting Elevator Ram Rear Assemby Manual Parts List
4 2
3 2 1 1
2 2
Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
Part Name
1
1
20-20 Ram Assembly
2
2
Pivot Pin 2 Frame
3
2
4mm R Clip
4
2
3/8 Tapered Male - 3/8 Tapered Male Nipple
Manual Section
Section A-10-8 Page No. 1 ŠDesign Copyright Robertson Manufacturing™
Comments
22/02/2011
Page 91
Tilting Elevator Hose Tee Assembly Manual Parts List 1 1
2 1 3 1
Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
Part Name
1
1
Tilting Elevator Hose Tee Frame
2
1
12mm Spring Washer
3
1
M12 x 1.75 Nut
Manual Section
Section A-11 Page No. 1 ŠDesign Copyright Robertson Manufacturing™
Comments
22/02/2011
Page 92
Comby Fine Mesh Silage Door Assembly Manual Parts List 6 1
5 1
1 1
4 1
3 1
7 1
Top Number = Item Number Bottom Number = Quantity
2 1
Issue 2
2011
Item Number
Quantity
1
1
Main Hinge Frame
Part Name
2
1
Comby Fine Chop Door Frame
3
1
M12 x 1.75 Nut
4
1
M12 x 40 x 1.75 HT Bolt
5
1
M12 x 55 x 1.75 HT Bolt
6
1
M12 x 1.75 Nylock Nut
7
1
Shaft Lock Pin 8mm
Manual Section
Section A-12 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
22/02/2011
Page 93
Fine Mesh Silage Door Assembly Manual Parts List
1 1
8 1 7 1
4 1
6 1
2 1
5 1
3 1
Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
Part Name
1
1
Door Frame
2
1
Flap Frame
3
1
M12 x 50 x 1.75 HT Bolt
4
1
Hinge Rod
5
1
M12 x 1.75 Nut
6
1
Main Hinge Frame
7
1
M12 x 60 x 1.75 HT Bolt
8
1
M12 x 1.75 Nylock Nut
Manual Section
Section A-12 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
22/02/2011
Page 94
Page 95
Joystick & Valve Loom 1 Assembly Manual Parts List 1 1
2 1
Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
Part Name
1
1
Wiring Loom 1 Standard Assembly
2
1
Joystick-Standard Assembly
Manual Section
Comments
A-13-1
Section A-13 Page No. 1 ©Design Copyright Robertson Manufacturing™
22/02/2011
Page 96
Joystick Standard Assembly Manual 7 1
5 1
1 1 13 2 15 1 14 1 16 1 17 1 18 1
6 1 4 1
9 2 11 1 2 1 19 1 10 1 3 1
12 1
8 1
Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Section A-13-1 Page No. 1 ©Design Copyright Robertson Manufacturing™
24/02/2011
Page 97
Joystick Standard Assembly Manual Parts List
Issue 2
2011
Item Number
Quantity
1
1
Joystick Box 1 Assembly
Part Name
2
1
16mm Grommett
3
1
12mm Grommett
4
1
Panel Mount Fuse Holder
5
1
Electric Joystick Handle Assembly
6
1
10 Amp Glass
7
1
Long Joystick Box Control Sticker
8
1
Female 7 Pin Trailer Flat Plug Assembly
9
2
6mm Crimp Eyelit
10
1
Earth Joiner Heat Shrink
11
1
100mm x 40mm Robertson Sticker
12
1
245mm x 175mm x 80mm Click Clack Box Assembly
13
2
Joystick Contact Switch
14
1
Jumper 5
15
1
Jumper 6
16
1
Jumper 7
17
1
Jumper 3
18
1
Power Loom
19
1
Valve Loom
Manual Section
Section A-13-1 Page No. 2 ©Design Copyright Robertson Manufacturing™
Comments
24/02/2011
Page 98
Pillow Block Mount Assembly Manual Parts List 6 2 4 2 2 1
3 1
8 2
5 4 1 1
7 4 Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
Part Name
1
1
Pillow Block Mount Frame
2
1
UCP 211 Housing
3
1
UC 211-200 Bearing Assembly
4
2
16mm Heavy Flat Washer
5
4
16mm Spring Washer
6
2
M16 x 55 x 2.00 HT Bolt
7
4
M16 x 2.00 Nut
8
2
M16 x 80 x 2.00 HT Bolt
Manual Section
Section A-14 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
22/02/2011
Page 99
Rear X-Floor Panel Rubber Flap Assembly Manual Parts List
1 1
4 7
2 1
6 7
A
3 7
5 7
DETAIL A Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
Part Name
1
1
Spill Tray Rubber Flap
2
1
Spill Tray Strap
3
7
M6 x 20 x 1.00 HT Bolt
4
7
6mm Panel Washer
5
7
6mm Spring Washer
6
7
M6 x 1.00 Nut
Manual Section
Section A-15 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
22/02/2011
Page 100
10mm Safety Chain Assembly Manual Parts List
1 1
2 2
Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
1
1
Saftey Chain Frame
Part Name
2
2
10mm Saftey Chain Eye Assembly
Manual Section
Section A-16 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
9/06/2010
Page 101
13mm Safety Chain Assembly Manual Parts List 1 1
2 2
Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
Part Name
1
1
Saftey Chain Frame
2
2
13mm Saftey Chain Eye Assembly
Manual Section
Section A-16 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
13/05/2010
Page 102
Valve Block Mount Control Assembly Manual Parts List Item Number
Quantity
Part Name
Manual Section
1
1
Joystick-Valve Cable Control Assembly
A-17-1
2
1
Control Valve Nipple Kit Assembly
A-17-3
Comments
Top Number = Item Number Bottom Number = Quantity
1 1
2 1
Issue 2
2011
Section A-17 Page No. 1 ŠDesign Copyright Robertson Manufacturing™
28/02/2011
Page 103
Valve Block Mount Control Assembly Manual Parts List Item Number
Quantity
Part Name
Manual Section
1
1
Joystick-Valve Electric Control Assembly
A-17-2
2
1
Control Valve Nipple Kit Assembly
A-17-3
Comments
Top Number = Item Number Bottom Number = Quantity
1 1
1 1
2 1
Issue 2
2011
Section A-17 Page No. 2 ŠDesign Copyright Robertson Manufacturing™
28/02/2011
Page 104
Manual Joystick Valve Control Assembly Manual Parts List
3 2
6 2
2 4
13 1
8 2
1 2
5 1 4 1 9 2
12 1 11 1 7 8
10 1
Issue 2
2011
Top Number = Item Number Bottom Number = Quantity
Section A-17-1 Page No. 1 ©Design Copyright Robertson Manufacturing™
25/02/2011
Page 105
Manual Joystick Valve Control Assembly Manual Parts List
Issue 2
Item Number
Quantity
1
2
3 Meter Joystick Manual Cable Assembly
2
4
8mm Flat Washer
3
2
8mm Spring Washer
4
1
Hydraulic Valve Cover
5
1
Joystick Mount Frame
6
2
M8 x 1.25 Nut
7
8
M8 x 1.25 Nylock Nut
8
2
M8 x 90 x 1.25 HT Bolt
2011
Part Name
Manual Section
9
2
Tractor Mount Frame
10
1
Valve Block Mount Flag Frame
11
1
6 Port Directional Power Beyond A-17-1-1 Control Valve Cable Actuated Assembly
12
1
6 Port Directional Control Valve Cable Actuated Assembly
A-17-1-2
13
1
Joystick Cable Action Assembly
A-17-1-3
Section A-17-1 Page No. 2 ©Design Copyright Robertson Manufacturing™
Comments
25/02/2011
Page 106
Page 107
6 Port Directional Power Beyond Control Valve Cable Actuated Assembly Manual Parts List Item Number
Quantity
1
6
M5 x 20 capscrew
Part Name
2
1
Spool Cap
3
2
16mm x 2.5mm O-ring
4
1
Cable Mount Casing
5
1
Cable Spool Adaptor Assembly
6
1
Return Spring
7
1
6 Port Directional Power Beyond Control Valve Block
8
1
Cable Spool
9
1
Pressure Relief Bung Assembly
10
2
3/8 BSP Plug Assembly
11
1
Pressure Relief Valve Assembly
Manual Section
Comments
A-17-1-4
2 1
10 2
7 1
1 6 6 1
3 2 8 1
9 1
5 1 4 1 11 1
1 6 Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Section A-17-1-1 Page No. 1 ©Design Copyright Robertson Manufacturing™
25/02/2011
Page 108
6 Port Directional Control Valve Cable Actuated Assembly Manual Parts List
1 6
2 1
6 1 4 2
10 2 4 2 8 1
3 1
9 1
7 1
11 1 8 1
3 1 5 1
1 6
Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Section A-17-1-2 Page No. 1 ©Design Copyright Robertson Manufacturing™
25/02/2011
Page 109
6 Port Directional Control Valve Cable Actuated Assembly Manual Parts List
Issue 2
Item Number
Quantity
1
6
M5 x 20 capscrew
2
1
Spool Cap
3
1
Cable Spool Adaptor Assembly
4
2
16mm x 2.5mm O-ring
5
1
Cable Mount Casing
6
1
Return Spring
7
1
6 Port Directional Control Valve Block
8
1
Cable Spool
9
1
Pressure Relief Bung Assembly
10
2
3/8 BSP Plug Assembly
11
1
Pressure Relief Valve Assembly
2011
Part Name
Manual Section
Comments
A-17-1-4
Section A-17-1-2 Page No. 2 ©Design Copyright Robertson Manufacturing™
25/02/2011
Page 110
Joystick Cable Assembly Manual Parts List 7 2
3 1
6 1
5 1
8 2 4 1 2 1
Top Number = Item Number Bottom Number = Quantity
Issue 2
1 1
Item Number
Quantity
1
1
Coupling
2
1
Cover
3
1
Handle
4
1
Handle Rod
5
1
Joystick Base
6
1
Lock Tab
7
2
Lock Tab Screw
8
2
M14 x 1.5 Lock Nut
9
1
M6 x 20 x 1.0 Cap Screw
10
3
Pivot Knobs
2011
Part Name
10 3
Manual Section
Section A-17-1-3 Page No. 1 ©Design Copyright Robertson Manufacturing™
9 1
Comments
25/02/2011
Page 111
Pressure Relief Valve Assembly Manual Parts List Item Number
Quantity
Part Name
1
1
22mm Pressure Relief Housing
2
1
Pressure Relief Valve Spring
3
1
22mm x 2.5 mm O-Ring
4
1
Pressure Relief Needle
5
1
Pressure Relief Valve Seat
Manual Section
Comments
Top Number = Item Number Bottom Number = Quantity
1 1
2 1
3 1 4 1
5 1
Issue 2
2011
Section A-17-1-4 Page No. 1 ŠDesign Copyright Robertson Manufacturing™
1/10/2008
Page 112
Electric Joystick Valve Control Assembly Manual Parts List Item Number
Quantity
Part Name
Manual Section
1
1
Hydraulic Valve Cover
2
8
M8 x 1.25 Nylock Nut
3
1
Valve Block Mount Flag Frame
4
20
8mm Flat Washer
5
1
Joystick & Valve Loom 1 Assembly
A-13
6
1
6 Port Directional Power Beyond Control Valve Assembly
A-17-2-1
7
1
6 Port Electric Control Valve
A-17-2-2
Comments
2 8
4 20 1 1
4 20
6 1 5 1 3 1
Issue 2
2011
7 1 Top Number = Item Number Bottom Number = Quantity
Section A-17-2 Page No. 1 ŠDesign Copyright Robertson Manufacturing™
25/02/2011
Page 113
6 Port Directional Power Beyond Control Valve Assembly Manual Parts List 1 2
5 1
6 1 2 1
3 1
4 2
7 2
Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
Part Name
Manual Section
1
2
3/8 BSP Plug Assembly
2
1
6 Port Directional Power Beyond Control Valve Block
3
1
Electric Spool
4
2
Electric Valve Spool Keeper Washer
5
1
Pressure Relief Bung Assembly
6
1
Pressure Relief Valve Assembly
A-17-2-3
7
2
Electric Spool Valve Assembly
A-17-2-4
Section A-17-2-1 Page No. 1 ŠDesign Copyright Robertson Manufacturing™
Comments
25/02/2011
Page 114
6 Port Directional Control Valve Assembly Manual Parts List Item Number
Quantity
1
2
3/8 BSP Plug Assembly
Part Name
Manual Section
2
2
Electric Valve Spool Keeper Washer
3
1
Pressure Relief Bung Assembly
4
1
Electric Spool
5
1
6 Port Directional Control Valve Block
6
1
Pressure Relief Valve Assembly
A-17-2-3
7
2
Electric Spool Valve Assembly
A-17-2-4
Comments
7 2 1 2
3 1
5 1
6 1 4 1
2 2
Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Section A-17-2-2 Page No. 1 ŠDesign Copyright Robertson Manufacturing™
25/02/2011
Page 115
Pressure Relief Valve Assembly Manual Parts List Item Number
Quantity
Part Name
1
1
22mm Pressure Relief Housing
2
1
Pressure Relief Valve Spring
3
1
22mm x 2.5 mm O-Ring
4
1
Pressure Relief Needle
5
1
Pressure Relief Valve Seat
Manual Section
Comments
1 1 Top Number = Item Number Bottom Number = Quantity
2 1
3 1 4 1
5 1
Issue 2
2011
Section A-17-2-3 Page No. 1 ŠDesign Copyright Robertson Manufacturing™
1/10/2008
Page 116
Electric Spool Valve Assembly Manual Parts List Item Number
Quantity
1
1
Electric Solenoid Coil Housing
2
1
19mm x 2.5mm O-Ring
3
4
M5 x 20 Capscrew
4
1
19mm x 3.0mm O-Ring
5
1
Valve Block Solenoid Cap
6
1
Spool Return Spring
7
1
22mm x 2.5mm O-Ring
8
1
Electric Coil Spool Pusher
9
1
12volt Coil 2902
7 1
Part Name
Manual Section
Comments
Top Number = Item Number Bottom Number = Quantity
9 1
6 1 8 1 1 1
3 4
2 1
4 1
5 1
Note: There are 4 assemblies per machine Issue 2
2011
Section A-17-2-4 Page No. 1 ©Design Copyright Robertson Manufacturing™
1/10/2008
Page 117
Control Valve Nipple Kit Assembly Manual Parts List Item Number
Quantity
Part Name
1
9
3/8 Dowty Seal
2
8
1/2 Parallel Male - 3/8 Parallel Male Nipple
3
1
1/2 Taper Male - 3/8 Parallel Male
4
1
1/2 Tapered Female Tee
Manual Section
Comments
Top Number = Item Number Bottom Number = Quantity
4 1
3 1 1 9
2 8
Issue 2
2011
Section A-17-3 Page No. 1 ŠDesign Copyright Robertson Manufacturing™
1/03/2011
Page 118
X-Floor Assembly Manual Parts List 1 1 4 1 6 1
7 1
3 1 10 1
11 1
2 1
12 1 8 1 5 1 9 1
13 1
Top Number = Item Number Bottom Number = Quantity Issue 2
2011
Section A-18 Page No. 1 ©Design Copyright Robertson Manufacturing™
25/02/2011
Page 119
X-Floor Assembly Manual Parts List
Issue 2
Item Number
Quantity
1
1
10mm PTO Clip
2
1
X-Floor Frame
3
1
Front X-Floor Elevator Panel Assembly
A-18-1
4
1
Load Cell Head Unit Mounting Assembly
A-18-10
5
1
Battery Box Including Battery
A-18-11
6
1
Front Screen Assembly Load Cell
A-18-2
7
1
Rear X-Floor Elevator Panel Assembly
A-18-3
8
1
X-Floor Reduction Box Assembly
A-18-4
9
1
Elevator Spill Tray Assembly
A-18-5
10
1
X-Floor Chain Assembly
A-18-6
11
1
X-Floor Drive Shaft Assembly
A-18-7
12
1
X-Floor Idler Shaft Assembly
A-18-8
13
1
X-Floor Leakage Tray Assembly
A-18-9
2011
Part Name
Manual Section
Section A-18 Page No. 2 ©Design Copyright Robertson Manufacturing™
Comments
Machine Option Component
Machine Option Component
25/02/2011
Page 120
Front Elevator Panel Assembly Manual Parts List Item Number
Quantity
Part Name
1
1
Front X-Floor Elevator Panel Frame
2
1
Front X-Floor Corner Insert
3
6
M12 x 1.75 Nut
4
10
12mm Spring Washer
5
1
Elevator Pivot Flange Plate
6
6
M12 x 30 x 1.75 HT Bolt
7
4
M12 x 20 x 1.75 HT Bolt
8
3
12mm Flat Washer
9
1
Elevator Pivot X-Lube Bush
10
1
1/4 Grease Nipple 90 Deg
Manual Section
Comments
Top Number = Item Number Bottom Number = Quantity
3 6
1 1
2 1
5 1
9 1
4 10
A 6 6 8 3
10 1
4 10
7 4
DETAIL A Issue 2
2011
Section A-18-1 Page No. 1 ©Design Copyright Robertson Manufacturing™
25/02/2011
Page 121
Comby Front Screen Assembly Manual Parts List 1 1
3 10 4 10
2 10
Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
1
1
Part Name
2
10
M12 x 45 x 1.75 Coach Bolt
3
10
12mm Spring Washer
4
10
M12 x 1.75 Nut
Manual Section
Comments
Front Screen Load Cell Frame
Section A-18-2 Page No. 1 ©Design Copyright Robertson Manufacturing™
17/12/2010
Page 122
Super Comby EX Front Screen Assembly Manual
9 1
4 1
6 10
2 10
3 1
7 10
1 1 8 2
5 3
10 1
2 10 Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Section A-18-2 Page No. 1 ©Design Copyright Robertson Manufacturing™
22/02/2011
Page 123
Super Comby EX Front Screen Assembly Manual Parts List
Issue 2
Item Number
Quantity
1
1
12mm Flat Washer
2
10
12mm Spring Washer
3
1
Flap Bend Tyne Spring
4
1
Front Screen Load Cell Frame
5
3
M12 x 1.75 Nylock Nut
6
10
M12 x 1.75 Nut
7
10
M12 x 45 x 1.75 Coach Bolt
8
2
M12 x 70 x 1.75 HT Bolt
9
1
Catch Chain Assembly
A-18-2-1
10
1
Super Comby EX Bale Manipulator Assembly
A-18-2-2
2011
Part Name
Manual Section
Section A-18-2 Page No. 2 ©Design Copyright Robertson Manufacturing™
Comments
22/02/2011
Page 124
Page 125
Catch Chain Assembly Manual Parts List 3 2
1 1
2 1 Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
Part Name
1
1
Catch Chain Frame
2
1
Chain Sheeve
3
2
0.5 Inch Dee Assembly
Manual Section
Section A-18-2-1 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
22/02/2011
Page 126
Super Comby Bale Manipulator Assembly Manual 4 1 1 1
2 1 7 1
3 2 11 1
5 1
8 1
6 2
10 2
9 1
Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Section A-18-2-2 Page No. 1 ©Design Copyright Robertson Manufacturing™
22/02/2011
Page 127
Super Comby Bale Manipulator Assembly Manual Parts List
Issue 2
Item Number
Quantity
1
1
Super Comby Bale Manipulator Frame
2
1
Manipulator Latch Spring Bush
3
2
12mm Flat Washer
4
1
6201 Bearing
5
1
M12 x 45 x 1.75 HT Bolt
6
2
M12 x 1.75 Nylock Nut
7
1
Bale Manipulator Latch Spring
8
1
Manipulator Top Latch Frame
9
1
Nylon Strip
10
2
M6 x 20 Countersunk Bolt
11
1
Catch Rope Assembly
2011
Part Name
Manual Section
Section A-18-2-2 Page No. 2 ©Design Copyright Robertson Manufacturing™
Comments
22/02/2011
Page 128
Super Comby EX Bale Manipulator Assembly Manual 4 1
1 1
3 2
5 1 7 1
6 2
8 1
11 1 2 1
9 1
10 2
12 1
Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Section A-18-2-2 Page No. 1 ©Design Copyright Robertson Manufacturing™
22/02/2011
Page 129
Super Comby EX Bale Manipulator Assembly Manual Parts List
Issue 2
Item Number
Quantity
1
1
Super Comby EX Bale Manipulator Frame
2
1
Manipulator Latch Spring Bush
3
2
12mm Flat Washer
4
1
6201 Bearing
5
1
M12 x 45 x 1.75 HT Bolt
6
2
M12 x 1.75 Nylock Nut
7
1
Bale Manipulator Latch Spring
8
1
Manipulator Top Latch Frame
9
1
Nylon Strip
10
2
M6 x 20 Countersunk Bolt
11
1
Catch Rope Assembly
12
1
EX Sticker 530mm x 120mm
2011
Part Name
Manual Section
Section A-18-2-2 Page No. 2 ©Design Copyright Robertson Manufacturing™
Comments
22/02/2011
Page 130
Page 131
Rear Elevator Panel Assembly Manual 2 1 9 5 1 1
3 5 4 1
6 1
10 1
7 9 8 4
A
5 5
DETAIL A Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
Part Name
1
1
Rear X-Floor Elevator Panel Frame
2
1
Rear X-Floor Corner Insert
3
5
12mm Flat Washer
4
1
Cast Flange Plate 2
5
5
M12 x 30 x 1.75 HT Bolt
6
1
1.5 x 1.75 X-Lube Bush
7
9
12mm Spring Washer
8
4
M12 x 20 x 1.75 HT Bolt
9
5
M12 x 1.75 Nut
10
1
1/4 Grease Nipple 90 Deg
Manual Section
Section A-18-3 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
24/02/2011
Page 132
X-Floor Reduction Box Assembly Manual 15 1
25 2
14 2
13 2 28 1
22 1 19 2
21 4
7 1
23 1 5 10
12 2 6 1
20 4
2 2 1 2 17 1
29 1 27 1
26 1
3 2 18 6
9 1 4 4
30 1
8 1
24 1
11 2 Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
10 1
Section A-18-4 Page No. 1 ©Design Copyright Robertson Manufacturing™
16 1
25/02/2011
Page 133
X-Floor Reduction Box Assembly Manual Parts List
Issue 2
Item Number
Quantity
1
2
1/2 Dowty Seal
2
2
1/2 Parallel Male - 1/2 Parallel Male Nipple
3
2
12mm Flat Washer
4
4
12mm Heavy Flat Washer
5
10
12mm Spring Washer
6
1
13 Tooth x 3/4 Pitch x 35 Bore x 10x8 Key Sprocket
7
1
16mm Flat Washer
8
1
208-108 Bearing Assembly
2011
Part Name
9
1
208-108 Housing Assembly
10
1
27 Tooth x 3/4 Pitch x 1.5 Bore x 3/8 Key Sprocket
11
2
3/8 x 1 UNC Grubscrew
12
2
3/8 x 3/8 Grubscrew
13
2
8mm Flat Washer
14
2
8mm Spring Washer
15
1
Adjuster Frame
16
1
Chain Cover Frame
17
1
Danfoss OMH 500 Motor
18
6
M12 x 1.75 Nut
19
2
M12 x 30 x 1.75 HT Bolt
20
4
M12 x 35 x 1.75 HT Bolt
21
4
M12 x 45 x 1.75 Coach Bolt
22
1
M16 x 2.00 Nut
23
1
M16 x 35 x 2.00 HT Bolt
24
1
M8 x 1.25 Nylock Nut
25
2
M8 x 16 x 1.25 HT Bolt
26
1
M8 x 25 x 1.25 HT Bolt
27
1
X-Floor Chain Adjuster
28
1
X-Floor Gearbox Rear Cover
29
1
X-Floor Reduction Box Frame
30
1
X-Floor Reduction Chain Assembly
Manual Section
Comments
A-18-4-1
Section A-18-4 Page No. 2 ©Design Copyright Robertson Manufacturing™
25/02/2011
Page 134
X-Floor Reduction Chain Assembly Manual Parts List
2 1
1 1
Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
1
1
Reduction Box Chain Frame
Part Name
2
1
12B Simplex Joiner Link Assembly
Manual Section
Section A-18-4-1 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
22/02/2011
Page 135
Elevator Spill Tray Assembly Manual Parts List 2 1
7 6
8 12
3 1
11 6
6 6 5 6
4 6
10 6 9 6
1 1
Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
Part Name
1
1
Spill Tray Frame
2
1
Spill Tray Rubber Flap
3
1
Spill Tray Strap
4
6
M6 x 20 x 1.00 HT Bolt
5
6
6mm Panel Washer
6
6
6mm Spring Washer
7
6
M6 x 1.00 Nut
8
12
9
6
12mm Spring Washer
10
6
M12 x 1.75 Nut
11
6
M12 x 25 x 1.75 HT Bolt
Manual Section
Comments
12mm Flat Washer
Section A-18-5 Page No. 1 ©Design Copyright Robertson Manufacturing™
22/02/2011
Page 136
Super Comby X-Floor Chain Assembly Manual Parts List
A 3 10 1 2
2 2
DETAIL A
Issue 2
Top Number = Item Number Bottom Number = Quantity
Item Number
Quantity
1
2
X-Floor Link Chain Frame
2
2
10mm Cal-Chain Joiner Assembly
3
10
25 x 50 X-Floor Slat
2011
Part Name
Manual Section
Section A-18-6 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments Includes Bolt & Nut
22/02/2011
Page 137
Super Comby EX X-Floor Chain Assembly Manual Parts List
A 3 10 4 10
1 2 2 2
Top Number = Item Number Bottom Number = Quantity
DETAIL A
Issue 2
Item Number
Quantity
1
2
X-Floor Link Chain Frame
2
2
10mm Cal-Chain Joiner Assembly
3
10
25 x 50 X-Floor Slat
4
10
Strong Back
2011
Part Name
Manual Section
Section A-18-6 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments Includes Bolt & Nut
22/02/2011
Page 138
X-Floor Drive Shaft Assembly Manual Parts List
2 1
3 2
5 2
1 4
4 1
6 1
Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
1
4
3/8 x 3/8 Grubscrew
Part Name
2
1
3/8 x 3/8 x 45mm Keysteel
3
2
3/8 x 3/8 x 90mm Keysteel
4
1
Drive shaft
5
2
X-Floor Drive Sprocket
6
1
Drive Shaft Cast Bearing Assembly
Manual Section
Comments
A-18-7-1
Section A-18-7 Page No. 1 ©Design Copyright Robertson Manufacturing™
22/02/2011
Page 139
Drive Shaft Cast Bearing Assembly Manual Parts List 3 1
1 1
7 4
2 1 5 4
6 4
4 4 Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
Part Name
1
1
Bush Holder Plate
2
1
X-Lube Bush
3
1
1/4 Grease Nipple 90 Deg
4
4
M12 x 40 x 1.75 Coach Bolt
5
4
12mm Flat Washer
6
4
12mm Spring Washer
7
4
M12 x 1.75 Nut
Manual Section
Section A-18-7-1 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
22/02/2011
Page 140
XFloor Idler Shaft Assembly Manual Parts List
2 2 3 1
1 4 4 2
5 2
Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
Part Name
1
4
M16 Tapered Nut
2
2
Shaft Adjuster Frame
3
1
X-Floor Idler Shaft
4
2
X-Floor Sprocket Spacer
5
2
X-Floor Idler Sprocket Assembly
Manual Section
Comments
A-18-8-1
Section A-18-8 Page No. 1 ©Design Copyright Robertson Manufacturing™
22/02/2011
Page 141
X-Floor Idler Sprocket Assembly Manual Parts List
3 1
2 1
4 1 1 1
Top Number = Item Number Bottom Number = Quantity
Item Number
Quantity
Part Name
1
1
X-Floor Idler Sprocket
2
1
X-Floor Idler Sprocket X-Lube
3
1
1/4 Grease Nipple Straight
4
1
Grease Point Sticker
Manual Section
Comments
Note: There are 2 assemblies per machine Issue 2
2011
Section A-18-8-1 Page No. 1 ©Design Copyright Robertson Manufacturing™
22/02/2011
Page 142
Page 143
X-Floor Leakage Tray Assembly Manual Parts List
5 8
4 1
1 1
9 10
6 8
2 1
7 18
8 18
3 1
Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
Part Name
1
1
Tray 1 Tab
2
1
Tray 2 Tab
3
1
Tray 3 Tab
4
1
Idler Shaft Cover Frame
5
8
M12 x 40 x 1.75 Coach Bolt
6
8
12mm Flat Washer
7
18
12mm Spring Washer
8
18
M12 x 1.75 Nut
9
10
M12 x 25 x 1.75 HT Bolt
Manual Section
Section A-18-9 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
22/02/2011
Page 144
Load Cell Head Unit Mounting Assembly Manual 7 5
8 5
4 1
6 5 1 1
5 1 3 1
11 1
13 1
12 1
Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Section A-18-10 Page No. 1 ©Design Copyright Robertson Manufacturing™
24/02/2011
Page 145
Load Cell Head Unit Mounting Assembly Manual Parts List
Issue 2
Item Number
Quantity
Part Name
1
1
Load Cell Head Unit Mount Frame
3
1
Load Cell Head Unit Cover Assembly
4
1
M12 x 60 x 1.75 HT Bolt
5
1
M12 x 1.75 Nylock Nut
6
5
6mm Panel Washer
7
5
6mm Spring Washer
8
5
M6 x 20 x 1.00 HT Bolt
11
1
Stad 04 Modified Head Unit Rev-002 Assembly
12
1
Super Comby Load Cell Sensor Cable Rev 002 Assembly
13
1
Super Comby Load Cell Power Cable Rev-001 Assembly
2011
Manual Section
Comments Specify Machine Model When Ordering
A-18-10-1
Section A-18-10 Page No. 2 ©Design Copyright Robertson Manufacturing™
24/02/2011
Page 146
Load Cell Head Unit Cover Assembly Manual Parts List
4 10
2 2
5 10
1 1 3 1
Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
1
1
Load Cell Head Unit Cover Tab
Part Name
2
2
63.5mm x 25mm x 1mm Flush Mount Hinge
3
1
Lexon Cover
4
10
M4 x 12 x 0.7 Pan Head Bolt
5
10
M4 x 0.7 Nut
Manual Section
Section A-18-10-1 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
24/02/2011
Page 147
Battery Box Incl Battery Manual Parts List
2 1
1 1
1 1
Top Number = Item Number Bottom Number = Quantity
Issue 2
Item Number
Quantity
1
1
Battery Box
2
1
12 Volt Battery
2011
Part Name
Manual Section
Comments Includes Lid & Tie Strap
Section A-18-11 Page No. 1 ©Design Copyright Robertson Manufacturing™
1/03/2010
Page 148
Load Cell Drawbar Top Cover Assembly Manual Parts List
4 6 3 6 2 6
1 1
Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
Part Name
1
1
Load Cell Drawbar Top Cover Frame
2
6
8mm Flat Washer
3
6
8mm Spring Washer
4
6
M8 x 20 x 1.25 HT Bolt
Manual Section
Section A-19 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
26/02/2010
Page 149
Spec's Chassis Tag Assembly Manual Parts List 2 4
1 1 Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
Part Name
1
1
Spec's Chassis Tag
2
4
4mm Rivet
Manual Section
Section A-20 Page No. 1 ŠDesign Copyright Robertson Manufacturing™
Comments
23/04/2010
Page 150
Adaptor Hose Mount Assembly Manual Parts List
4 4
1 1
2 2
3 2
Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
Part Name
1
1
Adaptor Hose Mount Frame
2
2
8mm Spring Washer
3
2
M8 x 65 x 1.25 HT Bolt
4
4
3/8 BSPP Straight Bulkhead Nipple
Manual Section
Section A-21 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
22/02/2011
Page 151
Super Comby Load Cell Junction Box Rev-002 Assembly Manual Parts List 7 1
6 4 4 1
Note Revision Number On Board 5 4
2 5 3 1 1 1 Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
1
1
100mm x 40mm Robertson Sticker
Part Name
2
5
12mm Grommett
3
1
Circurt Board Rev 002 Assemby
4
1
Junction Box Assembly
5
4
M3 x 6 x 0.5 Pan Head Stainless Bolt
6
4
M4 x 12 x 0.70 Capscrew
7
1
Silca Gel Bag 100 GSM
Manual Section
Section A-22 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
24/02/2011
Page 152
Super Comby EX Load Cell Junction Box Rev-002 Assembly Manual Parts List 3 4 4 1 1 1
5 4
2 7
7 1 6 1
Top Number = Item Number Bottom Number = Quantity
Issue 2
Item Number
Quantity
1
1
Junction Box Assembly
2
7
12mm Grommett
3
4
M4 x 12 x 0.70 Capscrew
4
1
Mega Comby Circurt Board Rev-002 Assembly
5
4
M3 x 8 x 0.5 Stainless Pan Head Bolt
6
1
Silca Gel Bag 100 GSM
7
1
100mm x 40mm Robertson Sticker
2011
Part Name
Manual Section
Section A-22 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
21/02/2011
Page 153
Load Cell Drawbar Lower Cover Swivel Assembly Manual Parts List
2 6 4 6 3 6
5 6
1 1
Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
Part Name
1
1
Load Cell Swivel Drawbar Lower Cover Frame
2
6
8mm Flat Washer
3
6
8mm Spring Washer
4
6
M8 x 1.25 Nut
5
6
M8 x 25 x 1.25 HT Bolt
Manual Section
Section A-23 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
29/09/2008
Page 154
Super Comby EX Fork Components Manual Parts List 4 1
1 1
3 1
5 1
2 1
Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
Part Name
Manual Section
1
1
Fork Assembly
B-2
2
1
Fork Ram Assembly
B-3
3
1
Fork Rear Brace Assembly
B-4
4
1
Chassis Fork Aeroplane Mount Assembly Rev-001
B-5
5
1
Super Comby Ex Fork Hose Kit Assembly
B-7
Section B-1 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
25/02/2011
Page 155
Fork Assembly Manual Parts List
2 2
1 1
Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
Part Name
1
1
Fork Frame
2
2
Pivot Pin Assembly
Manual Section
Comments
B-2-1
Section B-2 Page No. 1 ©Design Copyright Robertson Manufacturing™
22/02/2011
Page 156
Pivot Pin Assembly Manual Parts List 2 1
1 1
3 1 Top Number = Item Number Bottom Number = Quantity Item Number
Quantity
Part Name
1
1
Pivot Pin Frame
2
1
M8 x 50 x 1.25 HT Bolt
3
1
M8 x 1.25 Nylock Nut
Manual Section
Comments
Note: There are 2 assemblies per machine Issue 2
2011
Section B-2-1 Page No. 1 ŠDesign Copyright Robertson Manufacturing™
22/02/2011
Page 157
Fork Ram Assembly Manual Parts List 2 2 4 1 1 1
5 2 6 2
3 2
Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
Part Name
1
1
30-30 Ram Assembly
2
2
M12 x 45 x 1.75 HT Bolt
3
2
1" x 3" Linkage Pin
4
1
3/8 Tapered Male Bung
5
2
M12 x 1.75 Nylock Nut
6
2
3/8 Tapered Male - 3/8 Tapered Male Nipple
Manual Section
Section B-3 Page No. 1 ŠDesign Copyright Robertson Manufacturing™
Comments
22/02/2011
Page 158
Load Cell Fork Rear Brace Assembly Manual Parts List 2 4
3 4
4 4
1 1
Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
1
1
Load Cell Fork Rear Brace Frame
Part Name
2
4
M20 x 65 x 2.50 HT Bolt
3
4
20mm Spring Washer
4
4
M20 x 2.50 Nut
Manual Section
Section B-4 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
22/02/2011
Page 159
Super Comby Chassis Fork Aeroplane Mount Assembly Manual Parts List 6 2
2 2
5 2 1 1
3 4 Top Number = Item Number Bottom Number = Quantity
Issue 2
4 4
Item Number
Quantity
1
1
Load Cell Under Carriage Frame
2
2
M16 x 50mm x 2.00 HT Bolt
3
4
5/8 x 2' Unf Bolt
4
4
5/8 Unf Nylock Nut
5
2
16mm Heavy Flat Washer
6
2
M16 x 2.00 Nylock Nut
2011
Part Name
Manual Section
Section B-5 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
22/02/2011
Page 160
Fork Load Cell Under Carriage Assembly Rev-001 Manual Parts List
3 4
6 2 5 2 2 2
1 1
4 4
Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
Part Name
1
1
Load Cell Under Carriage Frame Rev-1
2
2
M16 x 50mm x 2.00 HT Bolt
3
4
5/8 x 2' Unf Bolt
4
4
5/8 Unf Nylock Nut
5
2
16mm Heavy Flat Washer
6
2
M16 x 2.00 Nylock Nut
Manual Section
Section B-5 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
25/02/2011
Page 161
Super Comby Extension Block Assembly Manual Parts List
3 2
1 1
4 2 2 2 Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
Part Name
1
1
Extension Block Frame
2
2
16mm Flat Washer
3
2
M16 x 2.00 Nylock Nut
4
2
M16 x 50mm x 2.00 HT Bolt
Manual Section
Section B-6 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
22/02/2011
Page 162
Super Comby Ex Fork Hose Kit Assembly Manual Parts List
1 1
3 2
5 1 2 1
4 2 Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
1
1
SCFEX-1 Assembly
Part Name
Manual Section
Ram Shaft Port
2
1
SCFEX-2 Assembly
Ram Base Port
3
2
3/8 BSPP Straight Bulkhead Nipple
4
2
3/8 Swivel Nut - 3/8 Tapered Male Elbow
5
1
1/2 Female Taper Ball Valve
Section B-7 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
22/02/2011
Page 163
11.5 x 80 Axle Assembly Standard Manual Parts List 4 1 7 4 3 4
1 2 2 2
5 4
6 4
8 4
Issue 2
Item Number
Quantity
1
2
1/4 Grease Nipple 90 Deg
2
2
1/4 Grease Nipple Straight
3
4
20mm Spring Washer
4
1
Axle Frame Standard
5
4
Grease Point Sticker
6
4
M20 x 2.50 Nut
7
4
M20 x 65 x 2.50 HT Bolt
8
4
11.5 x 80 x 15.3 Wheel Assembly
2011
Part Name
Top Number = Item Number Bottom Number = Quantity
Manual Section
Comments
C-10
Section C-1 Page No. 1 ©Design Copyright Robertson Manufacturing™
22/02/2011
Page 164
11.5 x 80 Axle Assembly Load Cell Manual Parts List
3 1 6 2
1 2
4 4
2 2
5 4
Issue 2
2011
Top Number = Item Number Bottom Number = Quantity
Item Number
Quantity
Part Name
Manual Section
1
2
1/4 Grease Nipple 90 Deg
2
2
1/4 Grease Nipple Straight
3
1
Axle Frame Standard
4
4
Grease Point Sticker
5
4
11.5 x 80 x 15.3 Wheel Assembly
C-10
6
2
Load Cell Axle Mount Assembly
C-13
Section C-2 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
22/02/2011
Page 165
Axle Assembly Heavy Duty Standard Manual Parts List 9 2 4 1 7 8
1 2
2 2 5 4
Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
3 8
8 4
6 7
Item Number
Quantity
Part Name
Manual Section
1
2
1/4 Grease Nipple 90 Deg
2
2
1/4 Grease Nipple Straight
3
8
20mm Spring Washer
4
1
Axle Frame Standard
5
4
Grease Point Sticker
6
7
M20 x 2.50 Nut
7
8
M20 x 65 x 2.50 HT Bolt
8
4
400/60x15.5 Wheel Assembly
C-11
9
2
Chain Guide Assembly
C-12
Section C-3 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
22/02/2011
Page 166
Axle Assembly Heavy Duty Load Cell Manual Parts List 1 2
6 2 4 1 7 4
2 2
3 4
5 4 Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
Part Name
Manual Section
1
2
1/4 Grease Nipple 90 Deg
2
2
1/4 Grease Nipple Straight
3
4
Grease Point Sticker
4
1
Axle Frame Load Cell
5
4
400/60x15.5 Wheel Assembly
C-11
6
2
Chain Guide Assembly
C-12
7
4
Load Cell Axle Mount Assembly
C-13
Section C-4 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
25/02/2011
Page 167
60mm x 60mm Unbraked Hub & Stub Assembly Manual Parts List 9 1
7 1
11 1 3 1
2 1 8 1
10 1
4 1
5 6 6 6 Item Number
Quantity
Part Name
1
1
Hub
2
1
40 x 80 x 19.75 Small Wheel Bearing Assembly
3
1
55 x 100 x 22.75 Large Wheel Bearing Assembly
4
1
80 mm Dust Cap
5
6
M18 x 50 Wheel Stud
6
6
M18 Wheel Nut
7
1
Stub Split Pin
8
1
Stub Nut
9
1
60 x 60 Stub
10
1
Stub Seal Carrier
11
1
1/4 Grease Nipple Straight
1 1 Top Number = Item Number Bottom Number = Quantity Manual Section
Comments
Note: There are 2 assemblies per machine Issue 2
2011
Section C-5 Page No. 1 ©Design Copyright Robertson Manufacturing™
21/09/2010
Page 168
60mm x 60mm Braked Hub & Stub Assembly Manual Parts List 11 1
12 1 1 1
5 1
9 1
8 1
6 6 3 1
10 1 13 1 7 6 4 1
2 1
Top Number = Item Number Bottom Number = Quantity Item Number
Quantity
Part Name
1
1
6mm Grease Nipple Straight
2
1
80 mm Dust Cap
3
1
Brake Arm
4
1
Brake Drum
5
1
Braked 60mm x 60mm Stub
c/w stub ass
6
6
M18 Wheel Nut
c/w stub
7
6
M18 x 50 Wheel Stud
c/w stub
8
1
SKF 30210 Small Wheel Bearing
9
1
SKF 30213 Large Wheel Bearing
10
1
Stub Nut
11
1
Stub Seal
12
1
Stub Seal Carrier
13
1
Stub Split Pin
Manual Section
Comments c/w stub
c/w stub
c/w stub
Note: There are 2 assemblies per machine Issue 2
2011
Section C-6 Page No. 1 ©Design Copyright Robertson Manufacturing™
22/02/2011
Page 169
70mm x 70mm Unbraked Hub & Stub Assembly Manual Parts List 11 1
5 6
7 1
3 1 1 1 2 1 9 1
10 1
4 1
12 1 13 1
Top Number = Item Number Bottom Number = Quantity
8 1
6 6 Item Number
Quantity
1
1
70 x 70 Hub
Part Name
2
1
30210 Small Wheel Bearing
3
1
30213 Large Wheel Bearing
4
1
90mm Dust Cap
5
6
M18 x 50 Wheel Stud
6
6
M18 Wheel Nut
7
1
Stub Split Pin
8
1
Grease Point Sticker
9
1
Stub Nut
10
1
70 x 70 Stub
11
1
70 x 70 Stub Seal
12
1
Stub Seal Carrier
13
1
1/4 Grease Nipple Straight
Manual Section
Comments
Note: There are 4 assemblies per machine Issue 2
2011
Section C-7 Page No. 1 ©Design Copyright Robertson Manufacturing™
25/02/2011
Page 170
70mm x 70mm Braked Hub & Stub Assembly Manual Parts List 12 1
10 1
3 1
2 1
9 1
8 6 1 1
5 1 11 1 13 1 4 1
6 1
7 6
Item Number
Quantity
Part Name
1
1
6mm Grease Nipple Straight
2
1
70 x 70 Stub
3
1
70 x 70 Stub Seal
4
1
80 mm Dust Cap
5
1
Brake Arm
6
1
Brake Drum
7
6
M18 Wheel Nut
8
6
M18 x 50 Wheel Stud
9
1
SKF 30210 Small Wheel Bearing
10
1
SKF 30213 Large Wheel Bearing
11
1
Stub Nut
12
1
Stub Seal Carrier
13
1
Stub Split Pin
Top Number = Item Number Bottom Number = Quantity Manual Section
Comments
Note: There are 2 assemblies per machine Issue 2
2011
Section C-8 Page No. 1 ©Design Copyright Robertson Manufacturing™
22/02/2011
Page 171
Stub Axle Parts (ADR) Size 60 SQ 70 SQ 80 SQ 90 SQ 100 SQ 110 SQ
Inner Outer Bearing Bearing 30211 30213 32215 30216 32217 32226
30208 30210 32211 32213 32214 33122
Crown Dust Cap Nut
Seal 100x57 120x67 130x77 140x82 150x87 230x132
H = Number of Studs
M39x1.5 M58x1.5 M90x2.0
80mm 90mm 110mm 120mm Bolt On
Wheel Nut
Wheel Stud Wheel Stud Unbraked Braked 6H - 18X1.5
6H - 18X1.5L
20mm
8H - 18X1.5 8H - 20X1.5
8H - 18X1.5L 8H - 20X1.5L
22mm
10H - 22x1.5
10H - 22X1.5L
18mm
L = Long Stud
Stub Axle Parts (GKN/FAD) Size
Inner Outer Bearing Bearing
Crown Nut
Seal
60 SQ 70 SQ 80 SQ 90 SQ 100 SQ
30211 30213 32215 32216 32217
30208 30210 32211 32212 32213
100X70X10 120X80X12 130X90X12 140x100x10 150x110x13
110 SQ
32218
33213
160x120x13
H = Number of Studs
Issue 2
2011
M33x2 M39x2 M45x2
Dust Cap 80mm 90mm 100mm 110mm 120mm Screw On (307F131)
Wheel Wheel Stud Wheel Stud Nut Unbraked Braked 18mm 20mm 22mm
6H - 18X1.5
6H - 18X1.5L
8H - 18X1.5
8H - 18X1.5L
8H - 20X1.5
8H - 20X1.5L 10H - 22X1.5L
L = Long Stud
Section C-9 Page No. 1 ©Design Copyright Robertson Manufacturing™
26/04/2010
Page 172
11.5 x 80 x 15.3 Wheel Assembly Manual Parts List
1 1
Top Number = Item Number Bottom Number = Quantity
2 1
Issue 2
Item Number
Quantity
1
1
9 x 80 x 6 Stud Rim Assembly
2
1
11.5 x 80 x 15.3 AW Tyre
2011
Part Name
Manual Section
Section C-10 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
17/03/2010
Page 173
400 x 60 x 15.5 Wheel Assembly Manual Parts List
1 1
Top Number = Item Number Bottom Number = Quantity
2 1
Item Number
Quantity
Part Name
1
1
60 x 15.5 Rim Assembly
2
1
400x60x15.5 AW Tyre
Manual Section
Comments
Note: When ordering tyres please quote tread pattern
AW Tread TRAC Tread Issue 2
2011
Section C-11 Page No. 1 ©Design Copyright Robertson Manufacturing™
25/02/2011
Page 174
Chain Guide Assembly Manual Parts List
2 2
1 1 3 2 4 2
Top Number = Item Number Bottom Number = Quantity
Item Number
Quantity
Part Name
1
1
Chain Guide Frame
2
2
M12 x 40 x 1.75 HT Bolt
3
2
12mm Spring Washer
4
2
M12 x 1.75 Nut
Manual Section
Comments
Note: There are 2 assemblies per machine Issue 2
2011
Section C-12 Page No. 1 ŠDesign Copyright Robertson Manufacturing™
22/02/2011
Page 175
Load Cell Axle Mount Assembly Manual Parts List 4 1
7 1
6 2
5 1
3 1
2 1
14 8
11 2 13 8
8 1
10 2 1 1 12 8
9 1
Top Number = Item Number Bottom Number = Quantity Item Number
Quantity
Part Name
1
1
Axle Mount Adaptor Plate
2
1
35mm Long Load Cell Casting
3
1
54mm Load Cell Bar
4
1
27mm Vertical Long Load Cell Casting
5
1
M18 x 100 x 2.5 HT Bolt
6
2
M18 x 2.5 Nylock Nut
7
1
M18 x 140 x 2.00 HT Bolt
8
1
M20 x 50 x 2.50 HT Bolt
9
1
M20 x 65 x 2.50 HT Bolt
10
2
20mm Spring Washer
11
2
M20 x 2.50 Nut
12
8
M16 x 60 x 2.00 HT Bolt
13
8
16mm Spring Washer
14
8
M16 x 2.00 Nut
Manual Section
Comments
Rev 002
Note: There are varying quantities per machine Issue 2
2011
Section C-13 Page No. 1 ©Design Copyright Robertson Manufacturing™
25/02/2011
Page 176
Extension Bin Assembly Manual
6 2 4 1
2 2
Top Number = Item Number Bottom Number = Quantity
3 2
5 1
Issue 2
1 1
2011
Section D-1 Page No. 1 ©Design Copyright Robertson Manufacturing™
25/02/2011
Page 177
Extension Bin Assembly Manual Parts List
Issue 2
Item Number
Quantity
1
1
Extension Bin Frame
2
2
Extension Bin Leg Assembly
D-2
3
2
Extension Bin Foot Latch Assembly
D-3
4
1
Extension Bin Left Handle Assembly
D-4
5
1
Extension Bin Right Handle Assembly
D-5
6
2
Extension Bin Lifting Eye Assembly
D-6
2011
Part Name
Manual Section
Section D-1 Page No. 2 ©Design Copyright Robertson Manufacturing™
Comments
25/02/2011
Page 178
Extension Bin Leg Assembly Manual Parts List 1 1 3 4
4 4 5 4
6 1
2 1
Top Number = Item Number Bottom Number = Quantity Item Number
Quantity
Part Name
1
1
Bin Mount Frame
2
1
Bin Leg Frame
3
4
M12 x 40 x 1.75 HT Bolt
4
4
12mm Spring Washer
5
4
M12 x 1.75 Nut
6
1
10mm PTO Clip
Manual Section
Comments
Note: There are 2 assemblies per machine Issue 2
2011
Section D-2 Page No. 1 ŠDesign Copyright Robertson Manufacturing™
22/02/2011
Page 179
Extension Bin Foot Latch Assembly Manual Parts List
3 1
2 2
1 2
Top Number = Item Number Bottom Number = Quantity Item Number
Quantity
Part Name
1
2
16mm Heavy Flat Washer
2
2
AG6 R-clip
3
1
Foot Latch Frame
Manual Section
Comments
Note: There are 2 assemblies per machine Issue 2
2011
Section D-3 Page No. 1 ©Design Copyright Robertson Manufacturing™
22/02/2011
Page 180
Extension Bin Left Handle Assembly Manual Parts List 2 1
1 1
4 1
7 1
3 1
6 1
8 1
5 1
Top Number = Item Number Bottom Number = Quantity
Issue 2
Item Number
Quantity
1
1
Left Handle Frame
2
1
M12 x 45 x 1.75 HT Bolt
3
1
12mm Flat Washer
4
1
M12 x 1.75 Nylock Nut
5
1
M6 x 35 x 1.00 HT Bolt
6
1
M6 x 1.00 Nut
7
1
M6 x 1.00 Nylock Nut
8
1
Quick Hitch Spring
2011
Part Name
Manual Section
Section D-4 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
22/02/2011
Page 181
Extension Bin Right Handle Assembly Manual Parts List 3 1
1 1
4 1
2 1
5 1
8 1
7 1
6 1
Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
1
1
Right Handle Frame
Part Name
2
1
M12 x 45 x 1.75 HT Bolt
3
1
12mm Flat Washer
4
1
M12 x 1.75 Nylock Nut
5
1
M6 x 35 x 1.00 HT Bolt
6
1
M6 x 1.00 Nut
7
1
M6 x 1.00 Nylock Nut
8
1
Quick Hitch Spring
Manual Section
Section D-5 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
25/02/2011
Page 182
Extension Bin Lifting Eye Assembly Manual Parts List
1 1
2 2
4 2
3 2
Top Number = Item Number Bottom Number = Quantity
Item Number
Quantity
1
1
Lifting Eye
Part Name
2
2
M12 x 30 x 1.75 HT Bolt
3
2
12mm Spring Washer
4
2
M12 x 1.75 Nut
Manual Section
Comments
Note: There are 2 assemblies per machine Issue 2
2011
Section D-6 Page No. 1 ŠDesign Copyright Robertson Manufacturing™
25/02/2011
Page 183
Comby Spread Assembly Rev-1 Manual 17 1 Top Number = Item Number Bottom Number = Quantity
3 1
13 1 6 1 15 1
18 1 2 1 7 1
16 1
5 1 Issue 2
2011
Section E-1 Page No. 1 ©Design Copyright Robertson Manufacturing™
22/02/2011
Page 184
Comby Spread Assembly Rev-1 Manual 17 1 Top Number = Item Number Bottom Number = Quantity
3 1 15 1
11 1 12 1
2 1 7 1
14 1 8 1 4 3 18 1
9 1 1 3
5 1
10 1
Issue 2
2011
Section E-1 Page No. 2 ©Design Copyright Robertson Manufacturing™
22/02/2011
Page 185
Comby Spread Assembly Rev-1 Manual Parts List
Issue 2
Item Number
Quantity
1
3
8mm Spring Washer
2
1
Auger Frame
3
1
Bin Frame
4
3
M8 x 1.25 Nut
5
1
Stainless Steel Flexi Hose
6
1
Stainless Steel Heavy Duty Hose Clip
7
1
Stainless Steel Heavy Duty Hose Clip
8
1
YAR205-100 Nylon Bearing
2011
Part Name
Manual Section
9
1
YAR205 Pressed Flange
10
1
Motor Assembly
E-10
11
1
Valve Block Assembly
E-2
12
1
3 Way Tractor Control Box Rev-1 Assembly
E-3
13
1
Fan Rev-1 Assembly
E-4
14
1
Control Wiring Loom Rev-2 Assembly
E-5
15
1
Fan Cover Assembly
E-6
16
1
Idler End Cap Assembly
E-7
17
1
Lid Assembly
E-8
18
1
Valve Block Loom Rev-1 Assembly
E-9
Section E-1 Page No. 3 ©Design Copyright Robertson Manufacturing™
Comments
22/02/2011
Page 186
Page 187
Valve Block Assembly Manual Parts List
5 2
3 2
1 1 7 10 6 2
2 4 Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
4 2
Item Number
Quantity
Part Name
1
1
Causmag Spreader Valve Assembly
2
4
1/2 Dowty Seal
3
2
1/2 Parallel Male - 3/8 Parallel Male Nipple
4
2
1/2 Parallel Male - 1/2 Parallel Male Nipple
5
2
M6 x 75 x 1.00 HT Bolt
6
2
M6 x 1.00 Nylock Nut
7
10
6mm Panel Washer
Manual Section
Section E-2 Page No. 1 ŠDesign Copyright Robertson Manufacturing™
Comments
22/02/2011
Page 188
3 Way Tractor Control Box Rev-1 Assembly Manual Parts List
11 1
6 1
10 2 8 1
18 2 1 1
4 1
7 1
15 1 17 1
9 1
13 1 12 1
14 1 5 2
16 1
Issue 2
2011
Top Number = Item Number Bottom Number = Quantity
Section E-3 Page No. 1 ©Design Copyright Robertson Manufacturing™
22/02/2011
Page 189
3 Way Tractor Control Box Rev-1 Assembly Manual
Issue 2
Item Number
Quantity
1
1
Modified 3 Way Switch Box Rev-1 Assembly
4
1
Center Light Contact
5
2
SPST Normally Closed
6
1
Comby Spread Control Box Sticker
7
1
Panel Mount Fuse Holder
8
1
Duraplug 3 Pin Female Assembly
9
1
10 Amp Glass
10
2
6mm Crimp Eyelit
11
1
Power Cabling
12
1
Jumper 1
13
1
Jumper 2
14
1
Jumper 3
15
1
Control Loom Rev-1
16
1
190mm x 130mm x 90mm Click Clack Box Assembly
17
1
3 Position Red Switch Assembly
18
2
12mm Grommett
2011
Part Name
Manual Section
Section E-3 Page No. 2 ©Design Copyright Robertson Manufacturing™
Comments
22/02/2011
Page 190
Fan Rev-1 Assembly Manual Parts List
1 1
2 1
Top Number = Item Number Bottom Number = Quantity
Item Number
Quantity
1
1
75mm Fan
2
1
Mini Sureseal Male
Wire ID
From Component ID From Component Terminal
Wire, Black 75mm Fan Wire, Yellow 75mm Fan
Issue 2
2011
Part Name
1 2
Manual Section
Comments
To Component ID
To Component Terminal
Mini Sureseal Male Mini Sureseal Male
1 2
Section E-4 Page No. 1 ŠDesign Copyright Robertson Manufacturing™
22/02/2011
Page 191
Control Wiring Loom Rev-2 Assembly Manual Parts List
2 1 Top Number = Item Number Bottom Number = Quantity
1 1
Wire ID
Wire 3,Brown Wire 3.Blue Wire 3.Green
Issue 2
Item Number
Quantity
Part Name
1
1
Duraplug 3 Pin Male Assembly
2
1
Comby Spread Loom
From Component From Component ID Terminal Duraplug 3 Pin Male Duraplug 3 Pin Male Duraplug 3 Pin Male
2011
L N Earth
To Component ID Mini Sureseal Female Mini Sureseal Female Earth Joiner Heat Shrink
Manual Section
To Component Terminal
Comments
Cable ID
Wire Diameter
3 Core Cable
8.00 mm
Wire Gauge 14
2
3 Core Cable
2.45 mm
14
2
3 Core Cable
2.45 mm
14
a
3 Core Cable
2.45 mm
14
Section E-5 Page No. 1 ŠDesign Copyright Robertson Manufacturing™
22/02/2011
Page 192
Fan Cover Assembly Manual Parts List 5 1
2 3 3 2 4 2
1 1
6 1
Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
1
1
Fan Cover Tab
Part Name
2
3
M8 x 20 x 1.25 HT Bolt
3
2
8mm Spring Washer
4
2
M8 x 1.25 Nut
5
1
Chassis Tag Assembly
6
1
M8 x 1.25 Nylock Nut
Manual Section
Section E-6 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
22/02/2011
Page 193
Idler End Cap Assembly Manual Parts List 5 5
1 1 3 5
6 5
4 1
2 2 Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
Part Name
1
1
Flange Plate Mount
2
2
YAR205 Pressed Flange
3
5
M8 x 25 x 1.25 HT Bolt
4
1
YAR205-100 Nylon Bearing
5
5
8mm Spring Washer
6
5
M8 x 1.25 Nut
Manual Section
Section E-7 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
22/02/2011
Page 194
Lid Assembly Manual Parts List 3 2
2 2
4 2
Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
1 1
Item Number
Quantity
Part Name
1
1
Lid Frame
2
2
8mm Flat Washer
3
2
M8 x 25 x 1.25 HT Bolt
4
2
M8 x 1.25 Nylock Nut
Manual Section
Section E-8 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
22/02/2011
Page 195
Valve Block Loom Rev-1 Assembly Manual Parts List
2 1
Top Number = Item Number Bottom Number = Quantity
1 1
Item Number
Quantity
1
1
Hershman Valve Plug 4 Pin Assembly
2
1
Valve Loom
Wire ID
Wire 2.Black Wire 2.Red
Issue 2
Part Name
From Component ID Hershman Plug 3 Pin 12 0-Clock Assembly Hershman Plug 3 Pin 12 0-Clock Assembly
2011
Manual Section
From Component To Component To Component Terminal ID Terminal 1 2
Mini Sureseal Male Mini Sureseal Male
Section E-9 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
Cable Wire Wire ID Diameter Gauge Cable 1 6.30mm 14
1
Cable 1 2.45mm
14
2
Cable 1 2.45mm
14
22/02/2011
Page 196
Motor Assembly Manual Parts List 8 2
9 2
1 1 5 2 2 1 7 2
3 1
Issue 2
2011
6 2
4 4
Top Number = Item Number Bottom Number = Quantity
Item Number
Quantity
Part Name
1
1
Danfoss OMP 80 HYD Motor
2
1
Motor Mount
3
1
Motor Coupling
4
4
3/8 x 3/8 Grubscrew
5
2
M12 x 40 x 1.75 HT Bolt
6
2
12mm Spring Washer
7
2
M12 x 1.75 Nut
8
2
1/2 Dowty Seal
9
2
1/2 Parallel Male - 3/8 Parallel Male Nipple
Manual Section
Section E-10 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
22/02/2011
Page 197
Super Comby Grain Tank Assembly Manual Parts List Top Number = Item Number Bottom Number = Quantity
8 1
15 1
9 5 3 5 11 3
B 6 1
7 1
10 3
3 5
9 5
A Issue 2
2011
Section F-1 Page No. 1 ©Design Copyright Robertson Manufacturing™
22/02/2011
Page 198
Super Comby Grain Tank Assembly Manual Parts List
7 1 17 1 16 1
2 1
DETAIL B 5 3
12 3 1 1 14 1
13 1 4 1 11 3
Issue 2
2011
DETAIL A Section F-1 Page No. 2 ©Design Copyright Robertson Manufacturing™
22/02/2011
Page 199
Super Comby Grain Tank Assembly Manual Parts List
Issue 2
Item Number
Quantity
1
1
1 x 1.25 x 1.625 X-Lube Bush
2
1
1/8 BSPT Grease Nipple Straight
3
5
12mm Flat Washer
4
1
12mm Spring Washer
5
3
8mm Spring Washer
6
1
Auger Frame
7
1
Grain Tank Frame
8
1
Grain Tank Lid Frame
9
5
M12 x 1.75 Nylock Nut
10
3
M12 x 25 x 1.75 HT Bolt
11
3
M12 x 30 x 1.75 HT Bolt
12
3
M8 x 1.25 Nut
13
1
Outlet Manifold Frame
14
1
Shaft Retainer Disc
15
1
Sight Glass Assembly
F-2
16
1
Motor Assembly
F-3
17
1
Valve Block Assembly
F-4
2011
Part Name
Manual Section
Section F-1 Page No. 3 ©Design Copyright Robertson Manufacturing™
Comments
22/02/2011
Page 200
Page 201
Super Comby EX Grain Tank Assembly Manual Parts List
8 1 Top Number = Item Number Bottom Number = Quantity
15 2 11 5 9 7 3 7
B 7 1
6 1
A Issue 2
2011
Section F-1 Page No. 1 ©Design Copyright Robertson Manufacturing™
22/02/2011
Page 202
Super Comby EX Grain Tank Assembly Manual Parts List 17 1
7 1
16 1
DETAIL B 10 3 9 7 2 1
3 7 13 1
6 1
5 3
12 3 4 1
DETAIL A 11 5 14 1 Issue 2
2011
1 1 Section F-1 Page No. 2 ©Design Copyright Robertson Manufacturing™
22/02/2011
Page 203
Super Comby EX Grain Tank Assembly Manual Parts List
Issue 2
Item Number
Quantity
1
1
1 x 1.25 x 1.625 X-Lube Bush
2
1
1/8 BSPT Grease Nipple Straight
3
7
12mm Flat Washer
4
1
12mm Spring Washer
5
3
8mm Spring Washer
6
1
Auger Frame
7
1
Grain Tank EX Frame
8
1
Grain Tank Lid EX Frame
9
7
M12 x 1.75 Nylock Nut
10
3
M12 x 25 x 1.75 HT Bolt
11
5
M12 x 30 x 1.75 HT Bolt
12
3
M8 x 1.25 Nut
13
1
Outlet Manifold Frame
14
1
Shaft Retainer Disc
15
2
Sight Glass EX Assembly
F-2
16
1
Motor Assembly
F-3
17
1
Valve Block Assembly
F-4
2011
Part Name
Manual Section
Section F-1 Page No. 3 ©Design Copyright Robertson Manufacturing™
Comments
22/02/2011
Page 204
Super Comby Sight Glass Assembly Manual Parts List 1 1 5 18
2 1
4 18
3 18
Top Number = Item Number Bottom Number = Quantity
Issue 2
Item Number
Quantity
1
1
Sight Glass Retainer Frame
2
1
Sight Glass
3
18
M6 x 20 x 1.00 HT Bolt
4
18
6mm Spring Washer
5
18
M6 x 1.00 Nut
2011
Part Name
Manual Section
Section F-2 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
22/02/2011
Page 205
Super Comby EX Sight Glass Assembly Manual Parts List 4 10 1 1
2 1
2 1 3 10 Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
Part Name
1
1
Sight Glass EX
2
1
Backing Strip EX
3
10
M6 x 25 x 1.00 HT Bolt
4
10
M6 x 1.00 Nylock Nut
Manual Section
Section F-2 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
22/02/2011
Page 206
Motor Assembly Manual Parts List 3 2
2 2
1 1
Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
1
1
Danfoss OMP 160 HYD Motor
Part Name
2
2
12mm Spring Washer
3
2
M12 x 30 x 1.75 HT Bolt
Manual Section
Section F-3 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
22/02/2011
Page 207
Valve Block Assembly Manual Parts List 5 2 3 2
1 1 7 10 6 2
2 4 Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
4 2
Item Number
Quantity
Part Name
1
1
Causmag Spreader Valve Assembly
2
4
1/2 Dowty Seal
3
2
1/2 Parallel Male - 3/8 Parallel Male Nipple
4
2
1/2 Parallel Male - 1/2 Parallel Male Nipple
5
2
M6 x 75 x 1.00 HT Bolt
6
2
M6 x 1.00 Nylock Nut
7
10
6mm Panel Washer
Manual Section
Section F-4 Page No. 1 ŠDesign Copyright Robertson Manufacturing™
Comments
22/02/2011
Page 208
Light Assembly Manual Parts List 2 2 1 2
3 1
3 1
3 1
3 1 Top Number = Item Number Bottom Number = Quantity
Issue 2
2011
Item Number
Quantity
Part Name
1
2
Marker Lamp 10v - 30v
2
2
LED Tail Light 150BARM
3
1
Wiring Loom Kit
Manual Section
Section G-1 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
22/02/2011
Page 209
Hazard Panels Manual Parts List
2 2 1 2
Top Number = Item Number Bottom Number = Quantity
Issue 2
Item Number
Quantity
Part Name
1
2
Hazzard Panel 300mm x 400mm Single Sided
2
2
Hazzard Panel 300mm x 400mm Single Sided
2011
Manual Section
Section H-1 Page No. 1 ŠDesign Copyright Robertson Manufacturing™
Comments
22/02/2011
Page 210
Feed Pad Kit Manual Parts List 3 1
1 1
2 2
4 1
Top Number = Item Number Bottom Number = Quantity
Issue 1
Item Number
Quantity
1
1
Chain Guide Assembly
I-2
2
2
Disc Roller Assembly
I-3
3
1
Feed Pad Kit Assembly
I-4
4
1
Seperator Rail Assembly
I-5
2011
Part Name
Manual Section
Section I-1 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
8/08/2011
Page 211
Chain Guide Assembly Manual Parts List
1 1
2 2
3 2
5 2
4 2
Top Number = Item Number Bottom Number = Quantity
Issue 1
Item Number
Quantity
1
1
Chain Guide Frame
2
2
M12 x 30 x 1.75 HT Bolt
3
2
12mm Flat Washer
4
2
12mm Spring Washer
5
2
M12 x 1.75 Nut
2011
Part Name
Manual Section
Section I-2 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
8/08/2011
Page 212
Disc Roller Assembly Manual Parts List
1 1
2 1
Top Number = Item Number Bottom Number = Quantity
Issue 1
Item Number
Quantity
1
1
Disc Roller Frame
2
1
1.5 x 1.75 X-Lube Bush
2011
Part Name
Manual Section
Section I-3 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
8/08/2011
Page 213
Feed Pad Kit Assembly Manual Parts List
8 1
2 2
9 2 1 12 4 12
6 1
Issue 1
7 2
3 10
Top Number = Item Number Bottom Number = Quantity Item Number
Quantity
1
12
M12 x 1.75 Nut
2
2
M12 x 25 x 1.75 HT Bolt
3
10
M12 x 30 x 1.75 HT Bolt
4
12
12mm Spring Washer
5
12
12mm Flat Washer
6
1
Feed Pad Kit Frame
7
2
Idler Shaft Assembly
I-4-1
8
1
Feed Pad Kit Chain Assembly
I-4-2
9
2
Feed Pad Kit Nylon Strip Assembly
I-4-3
2011
Part Name
5 12
Manual Section
Section I-4 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
8/08/2011
Page 214
Idler Shaft Assembly Manual Parts List
3 1
4 1
2 1
1 1
Top Number = Item Number Bottom Number = Quantity
Issue 1
Item Number
Quantity
1
1
Idler Shaft
2
1
1/8 BSPT Grease Nipple Straight
3
1
M12 x 1.75 Nylock Nut
4
1
M12 x 75 x 1.75 HT Bolt
2011
Part Name
Manual Section
Section I-4-1 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
8/08/2011
Page 215
Feed Pad Kit Chain Assembly Manual Parts List
1 1
2 2
Top Number = Item Number Bottom Number = Quantity
Issue 1
Item Number
Quantity
1
1
Feed Pad Kit Chain Frame
2
2
3 Inch Roller Chain Joiner Link
2011
Part Name
Manual Section
Section I-4-2 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
8/08/2011
Page 216
Feed Pad Kit Nylon Strip Assembly Manual Parts List 1 1
2 3
3 3
4 3
5 3 Top Number = Item Number Bottom Number = Quantity
Issue 1
Item Number
Quantity
1
1
Nylon Strip
2
3
M6 x 20 Countersunk Bolt
3
3
6mm Panel Washer
4
3
6mm Spring Washer
5
3
M6 x 1.00 Nut
2011
Part Name
Manual Section
Section I-4-3 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
8/08/2011
Page 217
Seperator Rail Assembly Manual Parts List
3 4 2 4
DETAIL A 1 1
A
Top Number = Item Number Bottom Number = Quantity
Issue 1
Item Number
Quantity
1
1
Seperator Rail Frame
2
4
M12 x 25 x 1.75 HT Bolt
3
4
M12 x 1.75 Nylock Nut
2011
Part Name
Manual Section
Section I-5 Page No. 1 ©Design Copyright Robertson Manufacturing™
Comments
8/08/2011
Page 218
AMENDMENTS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39
Issue 1
2008
Section I (Feed Pad Kit) added 08/08/2011
Section 2-Wiring page 19 diverter wiring corrected 19/06/14
Section Amendments Page No. 1 ©Design Copyright Robertson Manufacturing™
01/10/2008
Page 219
NOTES 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39
Issue 1
2008
Section Amendments Page No. 2 ©Design Copyright Robertson Manufacturing™
01/10/2008
Page 220
Please complete this form, remove and return to dealer Dealer Copy
MODEL
..........................................................................................................
SERIAL NUMBER
..........................................................................................................
OWNER
.......................................................................................................... .......................................................................................................... .......................................................................................................... ......................................................................................................... ………………………………………………………………….… ……………………………………………………………………. ……………………………………………………………………
ADDRESS
TELEPHONE NUMBER
..........................................................................................................
FAX NUMBER
..........................................................................................................
..........................................................................................................
DELIVERY DATE
..........................................................................................................
DEALER NAME
..........................................................................................................
DEALER TELEPHONE NUMBER
..........................................................................................................
DECLARATION
I declare that I have read this manual and understand the Warnings and Cautions
Owner Signature............................................................Date……………….. Pre delivery check completed .................(initial) Dealer Signature................................................Date.........................
Issue 1
2008
Section Amendments Page No. 4 ©Design Copyright Robertson Manufacturing™
01/10/2008
Page 221
Please complete this form, fold along the dotted lines on the reverse of this page, tape the edge, affix a stamp and post Robertson's Copy
MODEL
..........................................................................................................
SERIAL NUMBER
..........................................................................................................
OWNER
.......................................................................................................... .......................................................................................................... .......................................................................................................... ......................................................................................................... ………………………………………………………………….… ……………………………………………………………………. ……………………………………………………………………
ADDRESS
TELEPHONE NUMBER
..........................................................................................................
FAX NUMBER
..........................................................................................................
..........................................................................................................
DELIVERY DATE
..........................................................................................................
DEALER NAME
..........................................................................................................
DEALER TELEPHONE NUMBER
..........................................................................................................
DECLARATION
I declare that I have read this manual and understand the Warnings and Cautions
Owner Signature............................................................Date……………….. Pre delivery check completed .................(initial) Dealer Signature................................................Date.........................
Issue 1
2008
Section Amendments Page No. 6 ©Design Copyright Robertson Manufacturing™
01/10/2008
Page 222
FOLD HERE POST TO.... AFFIX STAMP HERE
ROBERTSON MANUFACTURING LTD P O BOX 6 HINDS 7747 MID CANTERBURY NEW ZEALAND
FOLD HERE
Issue 1
2008
Section Amendments Page No. 7 ©Design Copyright Robertson Manufacturing™
01/10/2008
Page 223
Pre Delivery Check Sheet Machine Options Fitted as Requested Safety Chain Retainer Bolts Fitted All Wheel Nuts Checked Axle Bolts Checked All Nuts and Bolts Checked Saftey Bolts Removed on Elevator with Tilt Option When Delivered x2 All Chains Tensioned Correctly Incl Gearbox Reduction Chains Tyre Pressures Correct All Points Greased All Hydraulic Hoses and Fittings, Tight and Checked for Leaks Manual\Electric Controls Working Jack Operation Correct Tail Door Operation Correct All Joints Sealed All Stickers Attached and Undamaged Operators Manual Supplied Reflectors NZ Patent Aussie Patent Paint Job OK Test Run OK Machine Runs Correctly Machine Quiet in Operation Lights Working - if fitted Brakes Working and Adjusted Correctly - if fitted Date…………………………………… Print Name Signed Dealer Name
OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK
Serial Number………………………………
Comments:-
This form must be completed and returned within 30 days of inspection, Fax to Robertson Manufacturing Ltd to Validate Warranty.
Issue 1
2008
Section Amendments Page No. 8 ©Design Copyright Robertson Manufacturing™
01/10/2008
Page 224
FOLD HERE POST TO.... AFFIX STAMP HERE
ROBERTSON MANUFACTURING LTD P O BOX 6 HINDS 7747 MID CANTERBURY NEW ZEALAND
FOLD HERE
Issue 1
2008
Section Amendments Page No. 7 ©Design Copyright Robertson Manufacturing™
01/10/2008