Operating Instructions

OPERATING INSTRUCTIONS ALL TYPES OF ROUND BALES

TO FEED

• Keep the feeder as level as practical - then operate the lever to start feeding out. • Start feeding and travelling at the same time. On an older bale, the material tends to come off thicker or quicker. Simply stop/start the chains to minimise this. • Drive in a circle slightly to the right. This helps to see the hay feeding onto the ground. Select a higher gear to achieve a thinner feed-out line if required.

INTO TROUGHS

• Lower the hydraulic arm right down. (Below shows the feeding operation). Run your tractor along as near as practical to the trough or feed pad as you begin to feed using lever 1. • If necessary, the hydraulic arm can be lifted up to 45o (but no higher when feeding) to give the precise amount of height for your application.