Warnings Cont

• Take CARE when travelling with a bale up on the rear forks as this lessens the stability of the machine. The closer the bale to the ground to lower the centre of gravity. • Always ensure the rear loading forks are in ‘transport’ position when travelling without a bale. ( approximately 45 ) • No alteration or modificatrion is to be done on this machine unless undertaken by Hustler or its authorised dealer. This will void the warranty. • ENSURE chain covers are in place when the machine is operating.

Chain may cause pinch point. • Vechile MUST be operated no more than 30km/h when the bale feeder is attached. • KEEP CLEAR of moving feed platform. DO NOT use for transporting anything other than a bale. • KEEP CLEAR of feed rotors. These have sharp points which are needed for teasing the bale . • ENSURE the jack pin is securely in place so the jack doesnt move in either the stand or transport position.