2020 Pre-Season Aftermarket Planter Catalogue by Hutcheon and Pearce

2020 Pre-Season Aftermarket Planter Catalogue

www.hutcheonandpearce.com.au

WHAT ARE WORN PLANTER PARTS COSTING YOU? Have you ever calculated your seed investment for a 10-hour day of planting? Let’s look at a hypothetical example: A cotton grower with a seeding rate of 160,000 plants per hectare in 40 inch rows with a 8R40 1725NT is planting nearly 1.3 million seeds per hour at 8.0kph or 2.0 million seeds per hour at 13kph Assuming a bag of seeds cost $180...

$180 bag of seed (approximately $0.0009 per seed)

$1,200/hr planting @ 8.0kph $1,800/hr planting @13.0kph Both figures calculated at an average field efficiency of 70%

Either way…in a 10-hour day of planting, That’s a BIG investment. With that many dollars in seed going through your planter meters each hour of the day, isn’t it worth the cost of a meter inspection to ensure you get the most out of that investment?

*All prices shown in Australian dollars including GST. Images are for illustrative purposes only. Parts discount only applies if Inspection and Repairs are booked in by July 31st 2020. Current prices affective as of March 2020. Prices subject to change after this period.

PLANTER EXPERT CHECK

Benefit from a trouble free planting period with accurate emergence. We have a dedicated Planter Test Stand that allows us to optimise your SeedStar™ XP row units. A John Deere trained Hutcheon and Pearce technician will calibrate your meters on this test stand. Meters are calibrated to a high accuracy.

Planters and metering units: • Meters only $75* per unit (parts not included) • Row unit only $50* per unit (parts not included) • Meter and row unit $100* per unit (parts not included)

Fixed price includes1:  On-farm Expert Check  Full Inspection Check  Written report on our findings (if required)

H&P Expert Check Guarantee:

 Meter calibration using test stand

If you break down in season, our H&P Expert Check Guarantee Includes: • Priority in-season repair assistance (within 6 months of repair date) •N o freight charges on overnight delivery from Melbourne on all required parts •N o travel charges (includes km and travel labour time) – only pay for the repair labour • No afterhours parts or service call out fees • H&P Expert Check Guarantee only applies if the recommended pre season repairs were completed by us.

Row unit checks

Conditions1

*Pricing is GST inclusive

Meter checks  Inspect vacuum seal and components  Inspect seed disk and components  Housings and brushes  Double eliminator

 Down pressure components  Openers and components  Seed tubes and components  Gauge Wheels and components  Bearings, chains and drives

- Expert Check must be completed by July 31 2020 - Repairs will be completed in a mutually agreed time frame. - Parts and labour for recommended repairs not included - Customers must have an up to date and current account. - All recommended service repairs are completed using your choice of genuine John Deere or A&I aftermarket parts. - Travel for on-site Expert Check is included in price (up to 150kms from nearest Hutcheon & Pearce location).

Hutcheon & Pearce 2020 Pre-season Aftermarket Planter Catalogue

PLANTER PRESEASON PROGRAM

PLANTER PRESEASON PROGRAM Hutcheon & Pearce offer the value of choice when it comes to the maintenance of your Planter.

OPTION OPTION

1 2

Full Inspection and Repair*: Let our John Deere trained Hutcheon & Pearce Technician inspect your machine and provide a full inspection and report. Receive a FREE Bottle of 80/20 Talc Graphite Blend, 10% off all parts, 12 month parts & labour warranty, finance options and our H&P Guarantee when we complete the repair work.

Over the Counter Parts Only Program^: Receive our preseason parts program offer of 5% off orders over $2,500 & 6 months parts only warranty THE MORE YOU BUY, THE MORE YOU SAVE.

Terms and conditions: * To qualify for free bottle of 80/20 Talc Graphite Blend & 10% off all parts; inspection must be completed by 31st July 2020. All recommended repairs must be completed in a mutually agreed time frame. Parts discount only applies to parts fitted by us as a part of the repairs recommended under the inspection program. Inspection & repair invoice must be paid in full prior to receiving free bottle of 80/20 Talc Graphite Blend. Account must be up to date & current. ^ To receive 5% discount off parts, total invoice amount must be over $2,500 & must be purchased within the same transaction. Account must be up to date & current

PLANTER OPTIMISATION Planting preparation is one of the most important steps in your farming operation; getting seed into the ground at the right time, right place and right rate is of paramount importance. At Hutcheon and Pearce, we offer planter solutions that give you complete confidence and peace of mind. Planters cover many acres every planting season. It’s essential to check your implement every season to ensure you are ready to make the most of the planting window. TEST STAND • Planter meters should be hitting 98% accuracy or better. Every percent under this is potential yield loss. Connecting Planter Meters to the Planter Meter Test Stand allows you to know what the current accuracy is and make adjustments to improve accuracy of that meter before the planting season. • The machine can test your rows, one by one; and indicate whether your implement is running efficiently. • The test stand displays results on the GreenStar™ 2630 Display; identifying skips, multiples, coefficient variation (CV), target population and seed singulation percentages.

OPTIMISATION – Option 1 Get ready for planting with our infield optimisation -

OPTIMISATION – Option 2 Get ready for planting with our AMS Support optimisation -

Additional services available (price on application) Contact TECSight if you would like to arrange a remote session or on farm visit. tel: (02) 5924 5111 email: support@tecsight.com.au www.hutcheonandpearce.com.au/technology-solutions/

Level checks Level & wing adjustments Hitch setup / working height correction Display set up – Documentation, offsets, seeding rates, vacuum. Receiver software updates and calibration Set up and usage of ITEC PRO and Automated Headland Turn Planter Setup - down force of planter row unit, seed depth, closing wheel down force & seed spacing AutoTrac setup & operation - “S” ing issues along the “A/B” line.

Ensure you know how to set up your screen correctly to collect yield data Establish your MyJD access and ensure you know how to see your data wherever you are Prepare and load your personalised setup file into your screen to ensure data collection is as hassle-free as possible Ensure your machine telematics are working (if requested) Software Updates – screen and receivers

Hutcheon & Pearce 2020 Pre-season Aftermarket Planter Catalogue

Hutcheon and Pearce understand the importance of gathering the most accessible and cheapest data layer available to growers – your yield data – and so we are offering a package to ensure that you gather the best yield data that you can, with minimal fuss, and can easily use it or share it for your own management decisions. Join us with our Data Campaign, which will include: Individual On-Farm Harvest Prep Visits, where we will: • Ensure you know how to set up your screen correctly to collect yield data • Train your operators on how to ensure they are capturing the best data possible • Establish your MyJD access and ensure you know how to see your data wherever you are • Prepare and load your personalised Harvest setup file into your screen to ensure data collection is as hasslefree as possible • Ensure your machine telematics are working (if requested) Data Quality Checks during Harvest, which will: • Proactively check your harvest data during harvest to ensure it is being collected properly, ensuring any problems are picked up quickly • Merge and correct any errors as they occur to ensure accurate data collection • Regular pro-active contact to ensure a smooth data experience

Additional services available (price on application): • Manual data routing – management of files moving from contractors accounts into your account • Variety locator files – ensure the correct varieties are recorded in the field, based on your seeding data

Do you want your data to upload automatically to your Operations Centre?

Contact your nearest branch or TECSight for details: tel: (02) 5924 5111 email: tecsight@hutcheonandpearce.com.au www.hutcheonandpearce.com.au/technology-solutions/

Don’t forget to add the rig h amount of Joh t n Deere Talc to each hopper when filling w ith seed.

EXPERT TIPS FOR PRECISION PLANTER

CHECKS IN THE SHED

Check the electric wiring and hydraulic connections are connected up correctly to the rear of the tractor.

Set-up the SeedStar™ Monitor and Document information to ensure correct set up & that you’re ready to plant when conditions are right.

On ground drive machines check the seed transmission and select the right sprocket combination to suit the desired rate. Set the tractors hydraulics for the correct vacuum level needed for the meter and seed type and rate.

Inspect seed disc holes, check they are free and not blocked, fit the seed disc and matching knock out wheel for the desired seed and rate. Checking the meter hub height after installing the seed disc will improve desired seed spacing seed. Check the meter baffle position and double eliminator position so it is correct for the seed type.

Check to see if the planter is level on the tractor from side to side and front to back – Adjusting the hitch lift links to level planter main frame side to side, adjustment of top link for levelling the planter front to back. If dealing with a stack fold machine you may need to adjust the level of each wing and make sure the lock pins can be fitted as required.

CHECKS IN THE FIELD

Setting up and saving the correct hitch height with the planter connected to the tractor and in the furrow – relive all air pressure in the pneumatic down force so there is zero pressure or on a planter with heavy duty force springs set the leaver into the float position. Parallel arms from the frame to the row unit should be parallel to the ground when looking at the across the planter from one end. This allows maximum travel of the row unit to follow the contour of the ground.

Check the ground drive wheels make the proper ground contact so there is no wheel slippage.

Verify the population and seed spacing with a field check by operating the planter for a short distance and check the seed spacing and depth. You will need to make the necessary adjustment for the desired depth, seed spacing and closing wheel.

Don’t forget to regularly inspect all of the planter components throughout the season and make the necessary adjustments.

Remember to book your annual planter preseason inspection with your local Hutcheon and Pearce branch to prevent costly in season down time!

Hutcheon & Pearce 2020 Pre-season Aftermarket Planter Catalogue

AMS SOLUTIONS JOHN DEERE APP CENTRE The John Deere App Centre is one convenient location to search for the John Deere mobile apps that can help you get more out of your equipment, your business and your day. The John Deere App Center is a tool to organize mobile apps for farming and construction customers. The apps within the John Deere App Center help users increase the performance and uptime of John Deere equipment, while lowering the cost of operation.

Mobile apps for your PLANTER ConnectMobile

SeedPlus

John Deere’s Connect Mobile, a mobile application, compatible with an Apple® iPad® that helps the operator monitor job quality during planting operations. Connect Mobile also has a common user interface that makes it easy to use between different pieces of John Deere equipment. The iPad is utilized in the cab and works in conjunction with the GreenStar 3 2630 Display and 4600 CommandCenter or 4640 Universal Display. The Connect Mobile app augments the existing information available by displaying high-resolution, quality maps and performance metrics that are not offered by the GreenStar 3 2630 and 4600 CommandCenter or 4640 Universal Display.

GoSeed has now become SeedPlus™. It gives John Deere 1870, 1890, 1895 Air Drill and 1910 air cart operators the ability to optimize their machine as they enter the seeding season through proper equipment and monitor setup, as well as maintenance and in-field procedures. This guide is intended to provide a quickreference overview of key adjustments and setup instructions to optimize your Air Seeding tools right at your fingertips. An enhancement was made for the N500C series air seeder that enables the ability to perform meter calibrations and view and tare product scale readings, if installed.

DOWNLOAD FROM THE APP STORE TODAY!

INDUSTRY ARTICLE

21st Century Farming Using Technology Effectively 21st Century farming is an ever evolving process that requires informed decision making based on collected and stored data from your individual property. This has led to an unprecedented amount of decision making capabilities that can sometimes seem overwhelming for growers. However, having a collaborative relationship with Hutcheon and Pearce, John Deere technology and combined with third party integrations have bridged the gap between good data and the application of this data in ensuring effective decision making. With the technology available we are seeing growers collecting data from a diverse range of sources. Three examples of the most utilised data includes: Yield data from your combineâ&#x20AC;&#x2122;s yield monitor, as applied rates from your Sprayer, Spreader, Seeder or Planter collected by ISObus or John Deere rate controllers, remote sensing of weather and soil moisture using Pessal Weather Stations alongside moisture meters which measure soil moisture at different depths of profile. These are just some of the valuable points of data collected by your John Deere that can be streamed wirelessly to your secure MyJohnDeere account which can be viewed by you on any desktop or mobile device. The ease of access to these essential data points, using the MyJohnDeere platform, makes it less daunting for the grower to confidently make choices for their property that are analytical. Coming into the planting season, an example of how you could utilise the yield data from the last growing season is calculating phosphorus removal either for your paddock or for multiple paddock zones. Having this information on hand allows for an effective decision to be made regarding the units of phosphorus that need to be replaced in paddock either in a broad rate or in the form of a variable rate prescription. This ensures that the right nutrients are put in the right place.

Hutcheon and Pearce and John Deere have multiple resources to assist growers in the collecting, management and utilization of their data like that which was mentioned above and more. These resources are, but are not limited to; the TECSight Field Support team which can assist with the on farm implementation of data collection through the optimization of your John Deere AMS and remote sensing technology, the Hutcheon and Pearce TECSight Call Center, who are a team of Solution Specialists ready to take your call to help with any troubleshooting that may arise. 21st century farming can seem daunting but with Hutcheon and Pearce personnel and John Deere technologies the process can be made seamless, simple and sustainable well into your successful farming future.

Hutcheon & Pearce 2020 Pre-season Aftermarket Planter Catalogue

ExactEmerge™ & SeedStar™

Contact your local Hutcheon & Pearce Branch for more information

SeedStar™ 3 HP Monitor Building upon the foundation of previous SeedStar™ monitoring, the SeedStar™ 3 HP monitoring system takes planter monitoring to the next level. When paired with a compatible Display, the SeedStar™ 3 HP monitoring system provides critical information about the planting process to the operator within the tractor cab. The SeedStar™ 3 HP planting functions are fully integrated with the full range of Precision Ag Technology applications such as John Deere Section Control for Planters, AutoTrac™ assisted steering system, John Deere Operations Center, JDLink™ telematics system, and others. Integrated planting technologies, for better asset utilization and ease of use, is just part of what SeedStar™ 3 HP provides. Check banks or waterways are two of many obstacles that make planting on a curve challenging. When planters utilize drive shafts, they are not able to control each individual row-unit; as a result, planting on a curve presents an issue of maintaining 100 percent population. Since the inside rows are moving slower than the outside rows, the inside rows will be over populating while the outside rows are under populating.

ExactEmerge™ With ExactEmerge™ planters and equipped MaxEmerge™ 5e planters, the curve compensation feature allows each row to receive an individual signal based on the speed at which the row-unit is moving, maintaining the correct population across the width of the planter. Without curve compensation, there could be as much as a 24 percent drop in population accuracy, which is equivalent to 24,000 seeds per hectare when planting at a rate of 100,000 seeds per hectare. Curve compensation measures acceleration within the main planter controller and utilizes speed inputs to ensure each row has the desired population accuracy. ExactEmerge™ planter brush-style double eliminator and rumble strip increase uptime. This double eliminator has an inner and outer design. The inner double eliminator is capable of being engaged or disengaged with no tools required for adjustment. The outer double eliminator is non-adjustable. Uptime - Seed changeover has never been easier or quicker with ExactEmerge™. If there is a little seed leftover in the minihopper, there are many effortless ways to clear the meter. The ExactEmerge™ meters disconnect from the row-unit by one simple latch and disconnect the vacuum and Central Commodity System (CCS™) hose and remove the meter. The operator can then manually dump the excess seed back into a bag. Industry-exclusive bowl-shaped disks offered with ExactEmerge™ planter allows for uniform planter performance even on slopes. Increase productivity with ExactEmerge™ trench delivery system and BrushBelt™ delivery system. ExactEmerge™ maintains accurate speed placement at previously unimaginable ground speeds; growers can avoid missing that peak planting time, thereby helping to get the highest crop yields. With the BrushBelt™ trench delivery system, the spacing in the trench does not change from even to uneven terrain or fast to slow ground speeds. This can be a problem with a traditional seed tubes. Seed bounce and ricochet may occur as slopes increases, ultimately decreasing seed spacing performance. Gauge Wheel - A trademark capability of the John Deere row-unit is the ability to provide consistent seed depth control in all field conditions. Depth Control is a function of the Tru-Vee openers, the downforce system and the gauge wheel assembly. Pneumatic closing wheels give producers the ability to adjust closing wheels in seconds without leaving the cab of the tractor.

ExactEmerge™ UPGRADE KIT If you’re looking for improved accuracy and speed, but aren’t quite ready to purchase a new planting unit - look to the ExactEmerge™ performance upgrade kit with the industry-exclusive BrushBelt delivery system, high-performance vacuum meter, redesigned double eliminator, dual electric motors, and more! The rate of seed / plant loss accelerates greatly after the optimum window has passed; with ExactEmerge™ you can avoid missing peak periods for planting. ExactEmerge™ is designed to handle a variety of seed sizes and shapes with no mechanical adjustment. Designed to offer unmatched agronomic performance to give you desired population, singulation and depth control; which results in precise seed placement and good seed-to-soil contact that you need to grow the best stands, at an even height and proper vigor. ExactEmerge™ offers the choice of preference Downforce options with Pneumatic or Hydraulic (dependant on serial number). The Easy Adjust Row Cleaners of the planter can be controlled directly from the cab of the machine. With the push of the button, they can be raised for wet areas, waterways or end rows The connectivity of ExactEmerge™ is unmatched in the market. Mobile Row Unit Run Off is the most efficient way to dial in your rows and conduct a meter performance test or remotely start and stop the planter externally. If you’re already running MaxEmerge™ or MaxEmerge5e™ and would like to maximise your planter’s performance potential; the ExactEmerge™ Performance Upgrade Kit could be the answer you’re looking for.

TYPICAL UPGRADE KITS INCLUDE: (*dependent on model year, serial number break and build)

MY05-MY14 –  New shank,  Row unit controller  High Performance Vacuum meter  Tru V Openers  Rock Guard  Scrapper Blades  Mini Hopper and ExactEmerge Meter  Gauge wheel Arms  2 x Power Generation System - 56v motors per row  Brush Belt Cartridge  Tail Lights (MY12 & older)

Talk to us at Hutcheon & Pearce about Plan-ting for success!

Hutcheon & Pearce 2020 Pre-season Aftermarket Planter Catalogue

TRADE & UPGRADE WE WANT YOUR GREENSTAR! DO YOU HAVE OLD RECEIVERS LYING AROUND? WE WILL BUY OR TRADE YOUR OLD RECEIVERS!

Why upgrade to the John Deere StarFire 6000 Receiver? GREATER ACCURACY: The John Deere StarFire 6000 Receiver is an enhanced replacement for the StarFire 3000 Receiver and expands on the value that precision agriculture growers have come to expect from StarFire products. The StarFire 6000 Receiver implements an improved antenna, the latest in Global Navigation Satellite System (GNSS) signal processing technology, and a differential correction signal. This technology adds up to improved performance and uptime as well as lower cost of operation when paired with precision agriculture systems such as AutoTrac™ assisted steering system and John Deere Section Control. Accuracy improvements are as follows: • • •

SF1 on a 6000 receiver will give you +/- 15 cm horizontal pass-to-pass accuracy, compared to +/- 25 cm on a 3000 receiver. SF3 on a 6000 receiver will give you +/- 3 cm horizontal pass-to-pass accuracy, compared to +/- 5 cm on an SF2 3000 receiver. No repeatability calculation on a 3000 receiver compared to a 6000 running SF3 of +/- 3 cm in season and RTK of +/- 2.5 cm long term.

TAKE ADVANTAGE OF RTK EXTEND™ SYSTEM FOR UP TO 14 DAYS: RTK operators have experienced the value that RTK Extend provides when operating in areas where communication with the RTK base station or mobile RTK network is challenging, such as in hilly terrain or heavy trees. The StarFire 6000 and StarFire 6000 Integrated make another step change in RTK Extend performance compared to their predecessor, delivering RTK Extend for up to 14 days. Compare this to the previous StarFire 3000 Receiver that was only capable of RTK Extend of up to 15 minutes.

IMPROVE UPTIME WITH MULTIPLE STARFIRE SIGNAL TRACKING The StarFire 6000 and StarFire 6000 Integrated Receivers simultaneously track correction signals from up to three StarFire correction satellites. The receiver tracks and uses correction signals from all StarFire satellites in view and intelligently chooses one that delivers the best performance. When the receiver moves into an area where the primary StarFire signal is blocked, such as near a tree line, the receiver automatically switches to an alternate StarFire signal (if visible) to help maintain accuracy and performance. Compare this to the previous StarFire 3000 Receiver that was only capable of tracking one StarFire signal at a time and could wait up to four minutes to initiate the switch to the next available signal. With the StarFire 6000 and StarFire 6000 Integrated Receivers, the user has improved performance and uptime when operating precision agriculture systems, like AutoTrac™ assisted steering system and Section Control in challenging areas, when compared to the previous

StarFire 3000.

Contact TECsight on (02) 5924 5111 for more information

TECHNOLOGY ENABLED CUSTOMER SUPPORT TECSight (Technology Enabled Customer Support) is a dedicated over-the-phone support for our products a nd technology. With nearly all products we sell at Hutcheon & Pearce going out the door with a piece of technology built in or added to it we recognise that customers don’t want to have to pay travel and labour for simple issues or just to help with setting up guidance or documentation. Key Benefits: 1. Reduce your downtime by having answers when and where you need them. 2. Reduce costs of unnecessary travel and labour for simple issues. 3. Have comfort knowing a fully qualified factory trained technician is available to you with the tools, simulators and resources available at their fingertips to keep you going. 4. Reduce your workload by having your operators contact us for help. 5. Have the security of someone monitoring your JDLink™ enabled equipment and notifying you of important codes that may come up. to name only a few…

At only $550 inc GST per year per farm it’s worth giving us a call. (First year included with all 6R, 7R, 8R, 9R, R-Series Sprayers, S-Series Harvesters, Cotton Pickers & Forage Harvesters)

Make technology work for you. tel: (02) 5924 5111 | email: support@tecsight.com.au

Hutcheon & Pearce 2020 Pre-season Aftermarket Planter Catalogue

With the continual increase in technology and features on new machinery we felt that it was extremely important that we put a dedicated, specialist team together to train and support customers, ensuring you are getting the most out of your equipment. Let our qualified staff help you build towards your production and management goals with accurate and timely data management. We provide the next level of service for data management by ensuring you get real value out of your data. This means making it simple to view, maintain, and collaborate with advisers and other stakeholders, and then ensuring your management decisions actually happen, back in the field. If you feel you could benefit from further training or optimisation assistance for any machinery please contact TECSight today!

OUR KICK-START SERVICE DELIVERED ON-FARM, INCLUDES:  Establishing access to MyJohnDeere.com  Introduction to Operations Centre, JDLink and our    

connected apps Assessing your individual requirements for data management Assessing potential training requirements (Screen, MyJohnDeere.com etc.) Introduction to 3rd party integrations with MyJD.com Assessment of current equipment and how to build this towards your business goals

ADVANCED SERVICES Our advanced service aims to address your production and management limitations in the field. We know this can vary significantly between fields, farms and businesses, so we work closely with your team to collect and collate the chosen data types to allow you to make more informed decisions. We then ensure that your machinery can deliver the plan. It can include:  Water Management: Drainage or moisture requirements  Staff / Partners: Input recommendations, staff job tracking/management  Soil Management Support ie: soil surveys, testing, zoning, plant imagery, weather monitoring  Business Management Support ie: Budgeting, record keeping, data integration  Fleet Management Support ie: machine optimisation, efficiencies and monitoring

(02) 5924 5111 CUSTOMISED SERVICES AVAILABLE:                      

Boundary creation AB line consolidation and renaming Set up file management Historical data layer consolidation AMS Training MyJohnDeere.com clean-up Machine analytics Receivers – Update and perform TCM calibration Displays – Software updates, Remove Coverage Export Data Rate Controller’s – Software updates, valve calibration checks and nozzle checks e.g. spray pattern, Product output checks/rate tuning and Software updates. Section Control – Tuning turn off/turn on times, remeasuring distances and system test Cotton ID – System RFID test and Software update. Mobile Weather – Software update RTK – Base station software updates, Antenna reflected power test, RTK tracking and performance testing. iGrade, iSteer or Distance trip - recalibration of SCV threshold’s, Implement receiver Optimised TCM Calibration, Wheel angle sensor calibration, Update software, Fine tuning of system sensitivity and Record settings for future reference, System test. T3RRA CUTTA & T3RRA Design – Software updates on tablet windows and T3RRA software, System Test. Autotrac – ATU system tuning, Software updates, Hydraulic valve recalibration, Wheel angle sensor calibration, Diagnostic Checks and System test iTec Pro and Auto-turn – System setup and Tuning In-field Data Sharing – System setup

OTHER PAID SERVICES THAT OUR SPECIALISTS CAN OFFER:     

Company training days, including machine safety and basic maintenance Operator training days (John Deere and Kuhn equipment) One on one customer optimisation training on existing equipment On farm consultations on getting the most out of your equipment Custom AMS solutions (in consultation with TECSight and H&P service departments)

Terms & Conditions Apply. Additional mechanical repairs outside of warranty will be charged at normal retail rates. Talk to TECSight for more details.

FOR MORE INFORMATION, CONTACT THE TECSIGHT TEAM AND ASK ABOUT OUR CONSULTING SERVICES

Hutcheon & Pearce 2020 Pre-season Aftermarket Planter Catalogue

Contact your local Hutcheon & Pear ce for the most up-to-date pricing

PLANTER PARTS

GAUGE WHEEL ASSEMBLIES, GAUGE WHEEL ARMS AND BUSHINGS The Select Series features a gauge wheel assembly and a Reduced Inner Profile (RIP) tyre. The gauge wheel provides excellent depth control in most soil conditions. It works with the Tru-Vee™ opener blades to form a well-defined seed furrow. It firms soil on seed-trench edges and provides flotation for seedbed openers in loose soils. (The RIP* tyre reduces sidewall compaction in heavy, wet, no-till conditions). Select Series gauge wheel assemblies and RIP tyres are designed for MaxEmerge™ XP row units only. The Spoke Gauge Wheel allows mud and debris to flow through the wheel to continue providing superior depth performance. This wheel features serviceable stamped inner and outer rims. The wheel has cast spokes and bearing hubs for added strength. New John Deere Gauge Wheel Arms with self-aligning bushings feature a simple bolt-through design that allows for quick removal for service.

NUMBER

DESCRIPTION

APPLICATION

AA35392 AA41359 A56565 A25915 A84062 A49918 A22780 AA67083 A84451 A84450 A84050 AA43898 AA66604 AA86055 AA86226 AA85465 AA82684

Gauge wheel assembly, metal Wheel, gauge wheel, plastic Wheel, outer, nylon Bearing, assembly, sleeve Tire, gauge wheel, 4 1/2 x 16-in. Tire, gauge wheel Gauge wheel half, metal RIP gauge wheel assembly Large lip conservation tire, 4 1/2 x 16-in. Tire, conservation, 4 1/2 x 16-in. 4.5 x 16-in. Wheel assembly Steel gauge wheel & tire assembly, offset Complete Spoke Gauge Wheel Assembly Complete Conservation Wheel Assembly Complete Narrow Wheel Assembly Gauge wheel arm kit (John Deere exclusive) Gauge wheel arm Gauge wheel arm

ME, ME2 ME, ME+, Pro-Series ME+, Pro, XP ME+, Pro-Series ME+, XP ME2, ME+ ME, ME2 MEXP, Pro XP MEXP, Pro XP ME, ME2, ME+

A97866 A92817

NORMAL PRICE*

PARTS DISCOUNTED BY 10% ON WORKSHOP INVOICE*

ME2 ME+, MEXP ME+, MEXP, Pro ME+, MEXP, Pro ME*, ME2 ME+, Pro-Series XP, ME5, EE

AA67083 RIP gauge-wheel assembly includes gauge wheel and gauge-wheel tyre. *RIP tyres are not recommended for light sandy soils or conventionally tilled soils.

PLANTER PARTS GAUGE WHEEL ASSEMBLIES, GAUGE WHEEL ARMS AND BUSHINGS CONT... NUMBER

DESCRIPTION

APPLICATION

A97867 A92818 A22325 AA28271 AA22097 AA35741 AA21480 AA59196 AN212132 AA38106 AA34132 JD8535 14M7260 14M7382 A52062 A55008

Gauge wheel arm pivot bushing Gauge wheel arm pivot bushing Press Wheels Tires Bearing Bearing Bearing Gauge Wheel Bearing Disc Bearing Bearing Bearing Gauge Wheel Bearing Press Wheel Bearing Press Wheel RH Nut LH Nut Tensioner Sprocket

Pro-Series ME+, Pro-Series MaxEmerge™ 2, MaxEmerge™ Plus MaxEmerge™ 2, MaxEmerge™ Plus MaxEmerge™ 2, MaxEmerge™ Plus MaxEmerge™ 2, MaxEmerge™ Plus MaxEmerge™ 2, MaxEmerge™ Plus MaxEmerge™ 2, MaxEmerge™ Plus MaxEmerge™ 2, MaxEmerge™ Plus MaxEmerge™ 2, MaxEmerge™ Plus MaxEmerge™ 2, MaxEmerge™ Plus MaxEmerge™ 2, MaxEmerge™ Plus MaxEmerge™ 2, MaxEmerge™ Plus MaxEmerge™ 2, MaxEmerge™ Plus MaxEmerge™ 2, MaxEmerge™ Plus MaxEmerge™ 2, MaxEmerge™ Plus

NORMAL PRICE*

PARTS DISCOUNTED BY 10% ON WORKSHOP INVOICE*

Contact your local Hutcheon & Pear ce for the most up-to-date pricing

TALC AND 80/20 TALC AND GRAPHITE BLEND Talc is specially designed for today’s wide range of seed treatments to enhance seed flow in all weather conditions. Talc is highly recommended for use with vacuum seed meters; however, some meters require 80/20 talc and graphite blend. This high-grade product offers the benefit of seed coating (talc) and lubrication (graphite) for vacuum seed meters. The 80/20 talc and graphite blend is 97% pure and mined in the USA. NUMBER

DESCRIPTION

SIZE

A52577 TY16433 TY16533AU TY26253AU

Talc Lubricant 9.5 L (2.5 gal.) Talc 80/20 Talc Graphite Blend Powdered Graphite

9.5 L (2.5 gal.) 19 L (5 gal.) Pail

PRICE*

454 g (1 lb.)

TRU-VEE™ OPENER ASSEMBLIES Tru-Vee Openers and blades are designed to cut a trench precisely to the selected depth. These OEM Diamond Series blades’ special bevelled edges make penetration easy, retain their sharp edge, and offer longer life compared to aftermarket alternatives. DISCOUNTED BY 10% NORMAL PRICE* PARTS ON WORKSHOP INVOICE*

NUMBER

DESCRIPTION

AA53860 AA55927 AA65248 AA65457

Tru-Vee Heavy-Duty, 3.5mm for ME+ and Pro Series Tru-Vee Standard-Duty, 3mm for ME+ and Pro Series Heavy-Duty, 3.5mm Double-Row Bearing for XP, ME5, and EE Heavy-Duty, 3.5mm Double-Row Bearing for ME2 and ME+

Hutcheon & Pearce 2020 Pre-season Aftermarket Planter Catalogue

Contact your local Hutcheon & Pear ce for the most up-to-date pricing

PLANTER PARTS DISK OPENERS AND COULTER BLADES Our most popular openers and coulter blades are made from the same high quality Diamond-Series material used on new John Deere seeding equipment. They’re not “just like” OEM, They are OEM. NUMBER

DESCRIPTION

SIZE/TYPE

AA57466 AA57467 A72358 A72359 A33066 A73911 A73615 A73910 A72360 A72677 A72678 A72679 A72680 A72361 A72404

Fertilizer Opener Assembly Fertilizer Opener Assembly Fertilizer Opener Seed Opener Coulter, Rippled Fluted Coulter Fluted Coulter Rippled Coulter – 6-Bolt Rippled Coulter – 5-Bolt Fluted Coulter – 6-Bolt Coulter Disk, 13-Flute, 7-in. Diameter Fluted Coulter – 6-Bolt Fluted Coulter – 5-Bolt Marker Blade, Notched Fertilizer Blade for Single-Disk Openers

13 1/2-in. 13 1/2-in. 13 1/2-in. 13 1/2-in. 20-in. 8-wave 8-wave 36-ripple 36-ripple 13-wave 13-wave 25-wave 25-wave 17-in.

DISCOUNTED BY 10% NORMAL PRICE* PARTS ON WORKSHOP INVOICE*

VACUUM METER PARTS AND KITS MaxEmerge™ and Pro-Series™ planters feature a heavier hub spring to ensure the seed stays in position. They also feature an improved disk-latch handle for easy operation and effortless seed-disk changeover.

DISCOUNTED BY 10% NORMAL PRICE* PARTS ON WORKSHOP INVOICE*

NUMBER DESCRIPTION

APPLICATION

AA89297 A52391 AA68703 AA62072 AA61046 AA37348 H135861 AA37206 A46670 A50617 A42586 A52259 A74191 A46670

ME2, ME+, and XP ME2, ME+, Pro-Series, XP Pro-Series Pro-Series ME2, ME+, and XP ME2, ME+, Pro-Series, XP MaxEmerge™ 2, MaxEmerge™ Plus ME2, ME+, Pro-Series MaxEmerge™ 2, MaxEmerge™ Plus MaxEmerge™ 2, MaxEmerge™ Plus MaxEmerge™ 2, MaxEmerge™ Plus MaxEmerge™ 2, MaxEmerge™ Plus MaxEmerge™ 2, MaxEmerge™ Plus MaxEmerge™ 2, MaxEmerge™ Plus

Vacuum Meter Hub Kit ProMax 40 Flat Seed Disk Double Eliminator, 4 Rows Double Eliminator, 4 Rows Double Eliminator, 2 Rows Knockout Wheel Seal Brush For Edible Beans/Cotton Hub Seal Standard Corn Disk Soybean Disk Early Vacuum Seal Late Vacuum Seal Vacuum Seal

PLANTER PARTS SEED TUBES AND SENSORS John Deere offers a variety of seed tubes to fit your planter. Choose regular or large curved tubes for accurate seed placement. Or, for the most precise and consistent seed spacing row after row, the flush-face seed tube is the ideal choice. It features an uninterrupted, smooth interior surface for each seed to travel. NUMBER

DESCRIPTION

APPLICATION

Seed tubes: AA67780

Flush Face

MaxEmerge™ 2, MaxEmerge™ Plus, XP MaxEmerge 2, MaxEmerge Plus MaxEmerge 2, MaxEmerge Plus, XP MaxEmerge 2, MaxEmerge Plus, XP MaxEmerge 2, MaxEmerge Plus, XP

AA58293 Regular Sensor A56786 Large Curved A54471 Pin J16931 Clip Seed tubes with red light-emitting diode sensors: A74931 Regular Curved A26184 Large Curved Sensors and seed tubes: AA58287 Infrared Sensor with Regular Curved Seed Tube AA58288 Infrared Sensor with Large Curved Seed Tube AA58285 Large Curved – infrared sensor AA67779 Flush Face – Accu-Count Sensor

Contact your local Hutcheon & Pear ce for the most up-to-date pricing

DISCOUNTED BY 10% NORMAL PRICE* PARTS ON WORKSHOP INVOICE*

MaxEmerge MaxEmerge MaxEmerge MaxEmerge MaxEmerge 2, MaxEmerge Plus MaxEmerge™ 2, MaxEmerge™ Plus

AA67778 Flush Face – Regular Sensor Seed tube guard: A97107 Curved Seed Tube Guard AA54755 Curved Seed Tube Kit AA68468 Curved Seed Tube Guard Kit A80203 Curved Seed Tube Guard Seed sensors:

MaxEmerge™ 2, MaxEmerge™ Plus

AA47936

Threaded Sensor

MaxEmerge™ 2, MaxEmerge™ Plus

AA61909 AA58295

Accu-Count Sensor Accu-Count Seed Tube Sensor

MaxEmerge™ 2, MaxEmerge™ Plus ME+, Pro-Series

MaxEmerge™ 2, MaxEmerge™ Plus ME+, Pro Series ME2, ME+, ME XP Row Unit

RADIAL BEAN METER PARTS The Radial Bean Meter does for soybean planting what the finger-pickup meter did for corn planting: it provides greater accuracy—simply and economically. NUMBER

DESCRIPTION

APPLICATION

AA38393 A56381

Flipper Drive Brush, Singulating

ME2, ME+, Pro-Series, XP ME, ME2, ME+, Pro-Series, XP

DISCOUNTED BY 10% NORMAL PRICE* PARTS ON WORKSHOP INVOICE*

Hutcheon & Pearce 2020 Pre-season Aftermarket Planter Catalogue

PLANTER PARTS FINGER-PICKUP SEED METERS Save time and money by checking meters before you go to the field. For smoother operation, the fingerpickup assembly should be dimensionally correct and fit flush against the carrier plate. Proper fingerspring tension is another essential for good meter performance. Replace stretched or broken springs as needed; also, check for wear on seed belts and replace as needed to ensure peak performance.

NUMBER

DESCRIPTION

AA60537 AA60535 A22796 A67976 A76093 AA60534 AA31262 A22305 A25542 AA22780 AA35660 AA35644 A68331 A37177 A68169 A65626 AA26713 A47532

Complete meter for ME Complete Meter for ME2, ME+, MEXP Housing Cover Seed belt Belt Driver Finger Assembly, Corn Finger Assembly, Sunflower Idler Bearing Housing Conveyor Housing Assembly Brush Assembly (2) Carrier Plate with Brush Finger, corn Finger, Sunflower Spring Corn Baffle Cup Assembly, Soybean Feed Deflector

Contact your local Hutcheon & Pearce for the most up-to-date pricing

NORMAL PRICE*

PARTS DISCOUNTED BY 10% ON WORKSHOP INVOICE*

SCRAPERS NUMBER

DESCRIPTION

APPLICATION

AA62808

Tungsten-Carbide Scraper, Complete Assembly Tungsten-Carbide, Scrapers Only Tru-Vee Scraper, Right-Hand, Riveted Tru-Vee Scraper, Left-Hand, Riveted Rotary Scraper Rotary Scraper Arm (right) Rotary Scraper Arm (left) Rotary Scraper Kit Scraper Arm (right) Scraper Arm (left) Heavy-Duty Scraper, One Row Scraper / Wiper Assembly Round Scraper

ME2, ME+, XP, Pro

AA62559 AA26443 AA26444 AA37221 A69140 A69139 AA54726 A98182 A98183 BA28012 AA79993 AH133315

NORMAL PRICE*

PARTS DISCOUNTED BY 10% ON WORKSHOP INVOICE*

ME2, ME+, XP, Pro ME ME ME2, ME+, XP, Pro ME2, ME+, XP, Pro ME2, ME+, XP, Pro ME2, XP MaxEmerge™ 2, MaxEmerge™ Plus MaxEmerge™ 2, MaxEmerge™ Plus ME2, ME+ ME5, XP, ME+

Force is a registered trade-mark of Syngenta®

JOHN DEERE PLANTER ATTACHMENTS

Talk to us today about how attachments can Add More to your planter.

2 Active Pneumatic Downforce 1 Coulter/Row Cleaner Combination

Automatically maintain precise soil penetration and consistent planting depth without sidewall soil compaction.

Ideal for those times when opener disks need help penetrating tough soil and residue—plus, for tilling the seedbed to help the closing wheels create good seed-to-soil contact.

5 3

Fertilizer Openers Single- and double-disk, frame-mounted fertilizer openers work well for a wide range of tillage conditions, including conventional, reduced, moderate no-till, and more.

RowCommand™

Cast-Iron Closing Wheel These closing wheels are best for tough soil and heavy residue conditions when more pressure is needed to close the furrow. Angle and stagger adjustments are identical to standard rubber wheels.

Automatically shut individual row units on and off to limit seed overlap and waste—particularly on headlands, waterways, and point rows.

Get exactly the Right Part at the Right Price – for as long as you own your machine, we have everything you need to stay up and running. We have parts to suit every need and cost from our Genuine John Deere parts quality John Deere Reman parts or affordable A&I Products.

That’s the value of choice. And you’ll only find it at John Deere!

Genuine John Deere Parts

John Deere Reman

A&I Products

Engineered and tested for its exact application, a genuine John Deere part is your best choice for performance and reliability.

When you need an OEM quality solution at a price you can afford, John Deere Reman will get your machine up and running in no time. It’s not rebuilt, it’s your machine reborn.

An economical repair option for your equipment. Whether you have an older or new John Deere machine A&I Products offer a variety of products for numerous applications.

Hutcheon & Pearce 2020 Pre-season Aftermarket Planter Catalogue

JOHN DEERE OILS TORQ-GARD™ ENGINE OIL Torq-Gard™ is specially developed for four stroke diesel and petrol engines, where standard drain intervals are required.

Packs Available 5L 20L 205L 1000L

CP8205 CP8206 CP8207 CP8208

Applications l Suitable for latest or older generation engines l Also suitable for turbo or non-turbo engines l For use in diesel or petrol engines Key Advantages l Contains a high-performance additive system for cleaner pistons and reduced wear l Excellent low-temperature fluidity, providing instant lubrication and engine protection l Effective acid neutralising properties help to reduce corrosion l Acceptable to change from Torq-Gard™ to Plus-50™ at any given oil or filter change Specifications SAE 15W-40, API CI-4/CH-4/CG-4/CF-4/SL, ACEA E7, E5, B3, A3

HY-GARD™ TRANSMISSION OIL Hy-Gard™ is a hydraulic and transmission oil formulated to protect heavily-loaded gears, wet brakes, wet clutches, and hydraulic systems Applications l Suitable for a wide range of operating conditions l Transmissions and differential units with immersed wet brakes l Gearboxes with hydraulic brakes l Gearboxes with hydraulic drive systems Key Advantages l Multi-viscosity formula for a wide range of operating temperatures l Prevents wear on high-torque heavy-loaded gears and bearings l Prevents wear and corrosion in hydraulic pumps l Provides proper friction for wet brakes and clutches, reducing slippage, wear and chatter l Prevents final drive wear due to anti-wear additives for gears Specifications SAE 10W-30, ISO 46-68, JDM J20C, JDQ 95 WEAR TEST

Packs Available 5L 20L 205L 1000L

CP1565 CP1566 CP1567 CP2103

JOHN DEERE OILS Packs Available

THERMA-GARD™ COOLANT Therma-Gard™ is a high-performance anti-freeze/summer coolant designed to meet and exceed today’s heavy-duty engine requirements.

5L 20L 205L 5L

Pre-Mix Pre-Mix Pre-Mix Concentrate

CP6175 CP6176 CP6177 CP6179

Applications l Engineered for heavy-duty applications, where automotive grade products do not provide effective protection against corrosion l Developed specifically for John Deere engines l Formulated with corrosion inhibitors to minimise the formation of deposits Key Advantages l 6 years/6,000-hour service life to reduce downtime and lower operating costs l 20% longer service intervals which translates to savings l High thermal and oxidative stability required by engines equipped with cooled exhaust gas recirculation (EGR) l Provides excellent protection against corrosion and deposits, extends water pump life and prevents cylinder liner cavitation

PLUS-50™ II PREMIUM ENGINE OIL Plus-50™ II is a premium Engine oil and is the next generation of superior John Deere engine oil. Plus-50™ II protects up to 500 hours, when used with John Deere filters in John Deere engines, saving you money on maintenance while giving you added peace of mind. Applications l For use in heavy-duty off-road applications, on-road trucks, marine engines, natural gas engines, pickups, and automobiles l Backwards compatible for use in all legacy diesel engine applications where Plus-50™ may have been applied l For use in John Deere IT4 engines and all diesel engines requiring API CJ-4 oil Key Advantages l For use in heavy-duty off-road applications, on-road trucks, marine engines, natural gas engines, pickups, and automobiles l Backwards compatible for use in all legacy diesel engine applications where Plus-50™ may have been applied l For use in John Deere IT4 engines and all diesel engines requiring API CJ-4 oil

Specifications SAE 15W-40, API CJ-4, CI-4 PLUS, CI-4, CH-4, CG-4, SM, SL, SJ, ACEA E9, E7, JASO GH-2

Packs Available 5L CP6657 20L CP6658 205L CP6659 1000L CP6660

Hutcheon & Pearce 2020 Pre-season Aftermarket Planter Catalogue

BEHIND YOU ALL SEASON LONG NT

A C A V S N O I T POSI

EVER WANTED TO WORK WITH DEERE GEAR? Hutcheon & Pearce currenlty have vaccancies for rewarding career opportunities Head to www.hutcheonandpearce.com.au/careers/current-vacancies/

ALBURY PO Box 823 222 Travelstop Way Albury NSW 2640 Phone: (02) 6058 6800 COLEAMBALLY 32 Bencubbin Way Coleambally NSW 2707 Phone: (02) 6954 4280

CONDOBOLIN 1a May Street, Condobolin NSW 2877 Phone: (02) 6891 2222

FORBES Angus Clarke Drive Forbes NSW 2871 Phone: (02) 6862 1666

ORANGE 26 Scott Place Orange NSW 2800 Phone: (02) 6362 9988

COWRA PO Box 160 64-68 Young Road Cowra NSW 2794 Phone: (02) 6341 4800

GRIFFITH Cnr Oakes Rd & Irving Place Griffith NSW 2680 Phone: (02) 6969 5300

TEMORA 101 Kitchener Road Temora NSW 2666 Phone: (02) 6977 1100

FINLEY 16 Riverina Highway Finley NSW 2713 Phone: (03) 5883 1655

LAKE CARGELLIGO 63 Canada Street, Lake Cargelligo NSW 2672 Phone: (02) 6898 1305

www.hutcheonandpearce.com.au

WAGGA WAGGA 57 Moorong Street Wagga Wagga NSW 2650 Phone: (02) 6933 7900 TECSightÂ® Support Centre (02) 5924 5111