2021 Pre-Season Aftermarket Harvest Catalogue by Hutcheon and Pearce

2021

Pre-Season Aftermarket Harvest Catalogue

www.hutcheonandpearce.com.au

FIXED PRICE SERVICE PROGRAMS Your tractor‘s engine is the lifeblood of your machine. Keep your tractor running at peak performance with our John Deere quality engine parts. MULTI-UNIT SERVICE DISCOUNT:  1 Unit - Normal Price

 2 Units - 25% labour discount on a servicej  3-5 Units - 50% labour discount on a servicej  5+ - 100% labour discount on the lesser value servicej Additional mechanical repairs outside of warranty will be charged at normal retail rates. jMust be booked and completed in the same visit. Discount will apply to the lesser value service.

EXPERT CHECK PROGRAMS Downtime can be costly. So why take chances when you depend on your equipment to keep your operation running smoothly? MULTI-UNIT EXPERT CHECK DISCOUNT:    

1 Unit - Normal Price 2 Units - 50% labour discount on the second Expert Checkk 3-4 Units - 1 Expert Check for freek 5 Units - 2 Expert Checks for freek

kMust be booked and completed in the same visit. Discount will apply to the lesser value Expert Check.

HARVEST PRESEASON PROGRAM

HELP US, HELP YOU! Last year we experienced one of our biggest harvests on record. This year we are also expecting a large harvest, but also a large amount of new machinery volume. We need your early commitment on preseason repairs to allow us to ensure that we guarantee that your equipment will be ready when you need it. Choose from one of our preseason programs for your harvester:

FULL EXPERT CHECK AND REPAIR* Let our trained service staff inspect your machine and provide a full inspection, written parts and fixed price labour quote for $600. If repairs are completed as per the expert check quote, you will receive^; - 10% off all parts - 12 month parts warranty and associated labour warranty on parts fitted by us - Our H&P Inspection Guarantee on all parts Take advantage of 0% p.a. finance - available on repairs if your machine is financed with John Deere Financial. Terms and conditions applyr. Conditions apply. Finance through John Deere Financial Limited (JDF). Approved commercial applicants only. Promotion requires a minimum parts spend of $11,000, including GST (this includes a minimum workshop service spend of $550, including GST). No deposit, no application fee and no repayments required for up to 12 months. Machinery being serviced must be currently financed by JDF or be unencumbered after having been financed by JDF, at the time of parts purchase. Fees and charges may apply. Promotion expires on 31/05/21.

FULL EXPERT CHECK AND SELF-REPAIRv Like to fit your own parts, but want some advice? Let our trained service staff inspect your machine and provide a full inspection, written parts and fixed price labour quote for $600. Receive 7.5% discount when placing an over the counter order over $3,500. Conditions: *Inspections must booked and committed to by February 28 2021. ^To qualify for 10% of all parts, 12 months part & associated labour warranty and HP Inspection Guarantee, all recommended repairs must be committed to within 30 days of receiving the repairs quote and completed within a mutually agreed time frame.

vTo qualify for over the counter parts discount, orders must be over $3,500 & placed in one transaction, inspections must be committed to by February 28 2021. Parts order must be placed before 30th of June 2021. All orders placed after this date will revert to normal retail pricing. All prices shown in Australian Dollars including GST. Customers must have an up to date and current account.

2021 PRE-SEASON AFTERMARKET HARVESTER CATALOGUE

HARVESTER EXPERT CHECK PROGRAM

FIXED PRIC

600

$ The Hutcheon & Pearce Harvester Expert Check includes:  Complete draper front inspection  Feeder house / feed accelerator  Tyres, wheels and bearings  Threshing / separating drives and components  Cleaning system operation

nal No additio r fo call out fee k! Expert Chec

 Elevators, grain tank and unloading system  Engine and hydrostatic drive  Cabin functions including GreenStarTM equipment  Check software update requirements  A detailed written report is provided

After each inspection has been completed, you will be provided with a complete checklist detailing our findings and recommendations. With the 2021 season ahead, now is the time to book in your Harvester Expert Check and receive our H&P Inspection Guarantee. As a John Deere dealer, our technicians have access to the latest training, OEM diagnostic equipment and technical manuals. This, combined with access to John Deere’s parts support network and Dealer Technical Assistance Centre, will keep you running when it matters most. When push comes to shove in the middle of harvest, can you afford to be waiting on a 3rd party repairer to keep you running?

Did you know? Software plays a critical part of your machines performance. On average software updates come out for each controller on your harvester 3-4 times per year. Talk to your local Hutcheon & Pearce expert for further information.

H&P Expert Check Guarantee:

AVAILABLE

Conditions1

If you break down during harvest, our H&P Expert Check Guarantee Includes: • Priority in-season repair assistance. • N o freight charges on overnight delivery from Melbourne on all required parts. • N o travel charges (includes km and travel labour time) – only pay for the repair labour. • No after-hours parts or service call out fees. • H&P Expert Check Guarantee only applies if the recommended pre-season repairs were completed by us.

0% p.a. FINANCE

- Inspections must booked and committed to by February 28 2021 - Repairs must be committed to within 30 days of receiving the repairs quote and completed within a mutually agreed time frame. - Parts and labour for recommended repairs not included - Customers must have an up-to-date and current account. - All recommended service repairs are completed using your choice of genuine John Deere or A&I aftermarket parts. - Travel for on-site Export Check is included in price (up to 150kms from nearest Hutcheon & Pearce location). - The $600 Expert Check fee must be paid in full with normal payment terms.

PARTS DISCOUNTED BY 10% ON WORKSHOP INVOICE~

Conditions apply. Finance through John Deere Financial Limited (JDF). Approved commercial applicants only. Promotion requires a minimum parts spend of $11,000, including GST (this includes a minimum workshop service spend of $550, including GST). No deposit, no application fee and no repayments required for up to 12 months. Machinery being serviced must be currently financed by JDF or be unencumbered after having been financed by JDF, at the time of parts purchase. Fees and charges may apply. Promotion expires on 31/05/21. r

>All prices shown in Australian Dollars including GST. Images are for illustrative purposes only. Current prices effective as of January 2021. Prices are subject to change after this period. ~Discount only applies if Inspections are committed to by February 28 2021 and repair quote accepted within 30 days of receiving.

FIXED PRICE HARVESTER SERVICE

FIXED PRICE LABOUR ONLY

990

No additional work will be done without your authorisation.

Harvester Major Service             

Check for software updates Grease all service points Change unit drive gearbox oils Change reduction gearbox oils Change engine oil and filter Change transmission oil and filters Change pump drive gearbox oil and filters Change both final drive oils Change hydraulic oil and filters Change air filters Change rear axle and final drive oils Change fuel filters Test run machine and found all working correctly

On Site Discount Service Travel Charges • •

For on-site service, add $100 within 100km of your nearest H&P Dealership. Or, add $150 for greater than 100km, but within 150km of your nearest H&P Dealership.

Conditions2 - Oils, coolant, filters and parts are not included - Travel charges apply for on-site servicing - No additional work will be done without your authorisation. - Additional mechanical repairs outside of warranty will be charged at normal retail rates.

2021 PRE-SEASON AFTERMARKET HARVESTER CATALOGUE

HARVESTER DATA CAMPAIGN

Hutcheon and Pearce understand the importance of gathering the most accessible and cheapest data layer available to growers – your yield data – and so we are offering a package to ensure that you gather the best yield data that you can, with minimal fuss, and can easily use it or share it for your own management decisions.

Join us with our Harvest Data Campaign, which will include: Individual On-Farm Harvest Prep Visits, where we will: • • • •

•

Ensure you know how to set up your screen correctly to collect yield data Train your operators on how to ensure they are capturing the best data possible Establish your MyJD access and ensure you know how to see your data wherever you are Prepare and load your personalised Harvest setup file into your screen to ensure data collection is as hassle-free as possible Ensure your machine telematics are working (if requested)

Data Quality Checks during Harvest, which will: •

• •

Proactively check your harvest data during harvest to ensure it is being collected properly, ensuring any problems are picked up quickly Merge and correct any errors as they occur to ensure accurate data collection Regular pro-active contact to ensure a smooth data experience

Post-Harvest Data Workshops: We will finish the season by running private group workshops in every Hutcheon and Pearce branch focusing on: • Data Collation – making sure all of your data is available, accurate and correctly merged • Teach you how to calibrate data and make the most of the features of MyJD or Apex • Ensure you can share your data with your advisers in the formats needed • Ensure that you can integrate your data into the farm management software of your choice. Additional Services available (Price On Application): • Manual data routing – management of files moving from contractors accounts into your account • Variety locator files – ensure the correct varieties are recorded in the field, based on your seeding data

Make your data work for you – talk to our TECSight team today. Call 02 5924 5111. >All prices shown in Australian Dollars including GST. Images are for illustrative purposes only. Current prices effective as of January 2021. Prices are subject to change after this period.

HARVESTER OPTIMISATION

HARVESTER OPTIMISATION INCLUDES

 Personalised, one on one, on farm consultation and machine          

optimisation Combine Advisor Setup, go through Client, Farm and Field Setup crop types and harvest settings Customise combine settings and tailor to on farm conditions Review grain loss results; regulate to acceptable outcome Setup header heights and reel settings Format yield recording and start / stop heights Evaluate header cut to set up width and track spacing’s Set up Chopper power shutdowns Configure wind compensation settings to control spread of reside out the back of the machine.

LIMITED LY! TIME ON RST THE FI LIMITED TO S ONLY! ER LL 20 CA

$420>s inc GST

sTerms & Conditions Price is optimisation only. Additional repairs are not included. If repair work is required or found at time of optimisation, the local service department will be advised. Image for illustrative purposes only. Price current Jan 2021 – Jun 2021. Price subject to change after this period.

2021 PRE-SEASON AFTERMARKET HARVESTER CATALOGUE

TECSIGHT INSIGHTS - FOR A HAPPY HARVEST

Our dedicated team at TECSight is gearing up to support our farmers with their precision ag data needs through this bumper harvest. The one message they have for farmers this season: Sort out your software and subscriptions. It’s a fairly safe bet that this harvest it going to be huge, and as combines start to move out of sheds and onto paddocks, TECSight Integrated Solutions Manager Hamish Ross says the key to an optimal harvest will now be your data and software. “It’s going to be an exciting couple of months and, if the rain stays away, it’ll certainly be an above-average harvest. We’ve got customers asking us, ‘What capabilities has my machine got and what can we do to maximize that potential?’ It’s great that they’re keen to use available technology to their advantage. “We’ve got a mix of owner-operators and farmers who bring in contractors and we’re finding they’re now saying, ‘You need to have John Deere and you need to be able to do the data recording.’ Some are also specifying that they want the two-centimetre accuracy you get from being hooked into the Hutcheon & Pearce base station network. “From our point of view, whether you’re a contractor or it’s your farm, as harvest kicks off it’s important to check your software and make sure that you’ve got all subscriptions in order. You’ll want your machines connected to My Operations Centre to know data is being recorded to the cloud.”

Hamish also reminds readers that from 1 February 2021, ITC receivers will become obsolete and StarFire 6000 and 3000 receivers will require a software update. “The ITC receivers are now 10+ years old and the satellite frequency that drives them is being turned off. That means that anyone with an ITC won’t be able to use that from the end of January. “If you have StarFire 6000 or 3000 receivers, the key date is 1 February 2021. The 2020 second software release was issued in late August, and it’s a really important one because it’s a change to the frequency that our receivers use. If it’s not updated before the end of January, receivers will lose that signal until they update their software. “While updating is as easy as going through the display in the tractor or downloading it from the John Deere website and putting it on an USB to plug it into the tractor or display, the TECSight team is certainly available to talk you through it if you encounter any dramas. “Alternatively, you can bring your displays and receivers into us in the TECSight office to do the update. If you’re a subscriber, there’s no cost. You can also take them to the workshop, but there is a charge for that.”

Hamish added that upgrades to the RTK network are still being carried out to give H&P remote monitoring capacity. “We’ve been making good progress and seeing some really positive results with the ability to monitor our base stations. Right now, that will take a bit of a backseat as harvest starts to fire up but we’ll get back to that work as soon as we can and hopefully have our upgrades done by February 2021.” Meet the team Hamish said the TECSight team has a range of skills to make harvest as seamless for customers as possible. “We have Toby who is heading into his first harvest with us and is really looking forward to getting into it. He’s got a livestock background and is really passionate about technology and farming and what access we can give to customers to help achieve their data analytics goals. “Then there’s John who has been with us for a few years and has a background as a mechanic but also has a pretty significant level of experience in the GPS world and has worked in various parts of the globe working with GPS for 15 years before coming to H&P. “We’ve got Jess, who was predominantly in the workshop before TECSight, so has that real mechanical background, and Michael, who’s not got a huge ag background but definitely has a mechanical background with Holden in New Zealand. He’s picked it up like a duck to water, and really great mind for analysing and error resolution and diagnostics.

“Dan is one of the more experienced guys in TECSight with more than four years’ experience on the phone talking customers through their issues large and small. And finally, there’s Carolyn, our admin assistant, who’s responsible for all the billing and stocking of products. “It’s a really good little team we’ve got, and we’ll be all hands on deck to see customers through harvest.” Hamish asks that if you have particular data needs this harvest, contact the TECSight team direct. “If there’s anything we can do to add value to your operations, we really want to know so we can be more proactive in our service. Whether that’s yield mapping, sowing and spraying data, or the satellite imagery service that we provide, there’s plenty of things we can do. “We can really help our customers to make the most out of their data and their relationships with their other trusted advisors, like accountants, banks and agronomists, that bit easier.”

For more information on the services TECSight provides, please contact the team on 02 5924 5111.

2021 PRE-SEASON AFTERMARKET HARVESTER CATALOGUE

EXPERT TIPS CONCAVES Make sure concaves are set up correctly. Refer to Operators Manual for setup. Make sure concaves are level and zero, as this can affect machine thrashing.

SEALING PLATE Inspect sealing plate in Feeder House to make sure gap is closed, as this can lead to excessive grain leakage. Manually adjust as required.

Grain lea ks from h ere if not adju sted corr ectly

SHOE AUGER To prevent material building up on one side while harvesting, adjust shoe auger beds as needed – typically left hand side is fully raised and right hand side is halfway. (Left side shown)

Adjustment Bolts

SEDIMENT BOWL Regularly drain water sediment bowl and clean internal filter as required.

FEEDER HOUSE CHAIN Running feeder house chain on high speed accelerates wear on chains and sprockets. Setting on low speed can decrease wear with minimal impact on feeding.

>All prices shown in Australian Dollars including GST. Images are for illustrative purposes only. Current prices effective as of January 2021. Prices are subject to change after this period.

EXPERT TIPS VARIATOR During prestart warm up it is recommended to run variator up down to allow grease to move through components.

GEAR CASE Check engine gear case breather regularly clean as required

CLEAN GRAIN Debris on Clean grain and tailings cameras can affect Combine Advisor performance. Clean regularly.

ELEVATOR CHAINS Check adjustment on elevator chains, be sure not to overtighten.

SEPARATOR GRATES COVERS Separator Grate Covers are installed on separator grates to help balance material across the cleaning shoe.

2021 PRE-SEASON AFTERMARKET HARVESTER CATALOGUE

NEW TECH ON DISPLAY - HARVESTER CLINICS

When you’ve got a new machine and harvest on the way, it’s natural to want to skip the introductions and get straight to work. But taking a moment to set up before harvest can be time well spent. Our Spring Harvester Clinics have been helping farmers across the region get to know their new rig and learn all about its capabilities before harvest really kicks into gear.

The experts who featured in our recorded Harvester Clinic videos (L-R): Russell Bate, Glen Montgomery, Hamish Ross, Andrew Watt, Dan Hardy, Trent Royston

Glen Montgomery providing a walkaround of the John Deere S700.

n October, more than 150 H&P customers and staff headed to the Temora Agricultural Innovation Centre to take part in one of four Harvester Clinics we had lined up.

system which automatically optimises the machine as the conditions change to achieve a target job quality that the owner or operator determines.

Sales Operations Manager Andrew Watt said the yearly Harvester Clinics are a great way to familiarise operators with the latest in machine technology. “We know when it’s getting into harvest season and there’s a new machine in the field, it’s very hard to make people stop and spend a day training on all the intricacies of the machines. All they want to do usually is get in and start using it. “We think it’s really important to spend some dedicated time off-farm where we can give operators as much knowledge as possible before the season gets underway.” As well as stepping through the harvester and its features, the clinics had a particular focus on training operators in the use of technology. “We had four clinics this year, one for customers from all over our area and three customised training days for large corporate entities that have recently purchased new harvesters. “At each of the clinics we went through a walk-around of the machine and discussed all the daily maintenance points, all the optimisation points on the outside of the machine and then spent time walking around the harvester fronts. “We stepped through different calibrations that need to be performed, then went through the screen navigation and how to use all its technology, including the new Combine Advisor optimisation technology that allows the machines to optimise themselves. “We finished up on the MyJohnDeere cloud-based solution, where all the production data and machine data sits.” Andrew said Combine Advisor received a lot of interest from participants. “It’s a new suite of technologies bundled under the name Combine Advisor and released in the S700 series last year. Basically, it’s a combination of smarts in the machine as well as cameras located on the tailings and clean grain

“The cameras look at the crop as it’s going into the clean grain tank and as it’s going through the tailings it’s able to sense what an unthreshed head might look like. It’s able to tell what’s straw and chaff versus what’s clean grain and if there’s too much chaff in the sample, then it automatically increases the fan speed, for example. “This technology is making a decision a thousand times a second versus even a great operator who might only make a change once an hour. The result is less losses, as you’re not leaving as much in the paddock.” Andrew said both staff and customers appreciated the Harvester Clinics. “Our staff love participating in discussions with their customers and I think it’s great for us to come together and learn from each other, and we’re really fortunate to partner with FarmLink and have our events there. They are always extremely helpful and having an event on a location of that size allowed us to reach our capacity of 150 people across the four events.” While COVID restrictions meant for the first time the clinics had to be invitation-only, H&P also had the chance to tackle things a little differently. “The clinics give us a chance to truck in both the customers and staff at the same time so we can share best practice once and it filters out to multiple locations. And this year we also recorded all of the sessions and spent some time turning them into videos and screenshots that we published in a private YouTube playlist and shared with our customers via email. “It’s really important that any of our customers who may have missed out attending an event in-person had the chance to watch and we’ve had some great feedback that people appreciated that. If you missed out on the clinics, you can always get in touch with one of our TECSight field specialists who can provide on-farm assistance with your harvester.” To contact TECSight, phone 02 5924 5111.

2021 PRE-SEASON AFTERMARKET HARVESTER CATALOGUE

AMS SOLUTIONS APPS & SUBSCRIPTIONS Go Harvest App The GoHarvest application gives S, W and T series combine operators the ability to optimize their 2012 or newer machine as they enter the harvest season. Operators choose the model of combine and type of crop. GoHarvest suggests initial settings for that crop type. GoHarvest also features a notes section and photo functionality to give combine operators a premium experience when setting their machine. Use the Seed Loss Calculator to calculate losses to optimize settings. GoHarvest is also a great guide to use in field for settings changes as conditions differ, and to document changes made to settings during harvest.

My Operations App Manage harvesting operations from anywhere within the MyOperations mobile application. Features in the app allow users to remotely view harvest information such as yield, moisture, and area worked. In addition, producers can remotely view and adjust combine settings for all machines in their fleet, giving them access to real-time information for remote combine optimisation. Current functionality allows them to see the following five combine settings: concave clearance, rotor speed, fan speed, chaffer clearance, and sieve clearance. Feature benefits: - Reduce cost and capture more grain through proper settings enabled by remote monitoring and adjustment. - Spread the skills of the top operator to all machines in the fleet. - Save time spent calling operations and travelling to different machines - Enhance the performance of all machine by matching the settings of the top operator - Enable more real time data management by seeing more real time agronomic information Additional notes: For a remote manager to have the ability to remotely view and adjust settings on a machine, several requirements have to be met. Each machine must have the following: - Model year 2018 or newer S700 Combine - 4600 CommandCenter Display: 18-1 or newer Gen 4 software for Remote View 8-2 or newer software for Remote Adjust - CommandCenter Premium 3.0 Activation - JDLink™ Connect subscription - MyOperations mobile application (latest version) with iOS device - John Deere Operations Center account with machine in the correct organisation - StarFire™ Receiver - Gen 4 CommandCenter Machine Performance App

John Deere Connect John Deere Connect Mobile is a mobile app that utilises an Apple ® iPad® tablet in the cab and helps the operator monitor job quality during planting, spraying, and harvest operations. Connect Mobile documents and displays multiple quality layers, helping the operator monitor and more easily detect problems that can occur during planting, spraying, or harvest. Connect Mobile also has a common user interface that makes it easy to use between different pieces of John Deere equipment. The iPad is utilised in the cab and works in conjunction with the GreenStar 3 2630 Display and 4600 CommandCenter or 4640 Universal Display. Harvest Attributes include Ground speed, Dry yield, Grain loss, Moisture and Wet yield.

>All prices shown in Australian Dollars including GST. Images are for illustrative purposes only. Current prices effective as of January 2021. Prices are subject to change after this period.

COMBINE UPGRADES

ActiveYield™ system Automatic yield calibration for corn, soybeans, wheat, canola, and barley. ActiveYield ensures accuracy of the combine’s yield with no time spent manually calibrating by the operator. Features and benefits: 9 Simplified yield calibrations for improved uptime in the field 9 Simplified data collection for use during and after harvest 9 Zero time spend calibrating for accuracy 9 Compatible with corn, soybeans, wheat, barley, and canola 9 Now compatible with rice on S700 9 Not compatible with S660 and S760 with manual grain tank extensions ActiveYield eliminates time-consuming manual calibrations and replaces them with automated sensors that calibrate the machine by measuring the grain as the tank fills. This enables decisions to be made in real time without leaving the cab, providing more accurate yield mapping data. ActiveYield is available for model year 2016 through model year 2019 S760, S770, S780, and S790 Combines and requires the 4600 CommandCentre™ Display, GreenStar™ 3 2630 Display, or GreenStar 3 CommandCentre. Additionally, a StarFire 3000 or 6000 Receiver must be installed on the combine with the TCM calibrated for ActiveYield to detect machine pitch correctly. Manual yield calibration is not required as each crop has a built-in default value. Harvest Doc™ system yield data collected by an ActiveYield system is only compatible with the John Deere Operations Centre. John Deere does not guarantee compatibility of ActiveYield collected documentation with John Deere APEX™ software or third-party software systems.

PART NUMBERS AND APPLICATIONS BXE10503 | MY12-15 S-SERIES COMBINES

BXE10797| MY16+ S-SERIES COMBINES

2021 PRE-SEASON AFTERMARKET HARVESTER CATALOGUE

COMBINE UPGRADES Combine Advisor / Active Terrain Combine advisor further unlocks the potential of our customers S700 combine, as field, crop and weather conditions let the Combine Advisor package to maintain performance of your combine. This industry leading technology differentiates John Deere machines in the field and differentiates John Deere machines when they are sold to their second owner. Combine Advisor also provides easy navigation of the S700 set and optimize features: harvest settings application for initial set up and setting storage, VisionTrak system for monitoring losses, and Optimize Performance for step-by-step guidance of combine setting optimization. Once John Deere Combine Advisor is set into motion, the operator will experience ease-of-use benefits coupled with increased productivity. The Combine Advisor application provides the tools needed to set the combine to get the most out of it and automatically adjust settings to maintain optimum performance. Inside this application on the 4600 CommandCenter™ Display, the operator will find many tools including easy-to-adjust current machine settings, sensitivity settings for automation, application status indicators, automation activity history overviews, and live feeds of grain analysis cameras. Additionally, the operator can access Optimize Performance, activate the three automation technologies, and set the performance targets the machine will automatically adjust to maintain.

Features and benefits:

9 Efficient combine operation with a one-page application for animation technologies

9 Improved combine settings management with settings, 9

sensitivities, and status information all on one reference page Reduced operator training and efficient, easy control of harvest settings through an intuitive run page and user interface

ENHANCEMENT KITS - GREASE LINES Talk to your local Hutcheon and Pearce Branch about our Grease Line Enhancement Kits. These extension lines are fitted to your final drive bearings, reel pump drive, left side feed accelerator, overshot beater & primary countershaft rotor bearing.

>All prices shown in Australian Dollars including GST. Images are for illustrative purposes only. Current prices effective as of january 2021. Prices are subject to change after this period.

Kondex® Concaves John Deere is pleased to introduce NEW Kondex® Revolution MaxThresh™ and MaxRound™ Half-Width concaves; exclusive to John Deere Dealers. These new concaves give more versatility to match varying crop and conditions; while being lighter weight, and easier to change and install. Please note due to high global demand, backorders may affect the initial availability of these parts. Orders placed on the program that go into backorder will be supplied once stock becomes available. Features: More versatility to match varying crops and conditions Maintain separator capacity with similar whitecap performance to small wire concaves with cover plates Half-width concaves are lighter and therefore easier to change and install Laser-clad material ensures long wear life

9 9 9 9

Recommended Set up: Bundles when required, are recommended to replace the first concave section Small Grains – Order BXE11144 which includes 2 - MaxThresh™ concaves, and 1 front lip plate Corn/Soybean – Order BXE11145 which includes 1 – MaxThresh™; 1 - MaxRound™; and 1 front lip plate Individual MaxThresh™ or MaxRound™ concaves may be installed in 2nd or 3rd concave sections if desired

9 9 9 9

Compatibility:

9 All S-Series Combines 9 All STS Combines 9 Not Available (9560 STS, 9570 STS, S550)

2021 PRE-SEASON AFTERMARKET HARVESTER CATALOGUE

PLATFORM PARTS INNOVATIVE ENGINEERING John Deere sickle sections are engineered for maximum performance.

Controlled Breakage Zone

The tapered tip and consistent serrations Full Section Undergoes Austempering Heat Treatment

Anti-Buildup Zone

Tapered Tip

maintain sharpness The anti-buildup zone reduces clogging and increases capacity T he innovative breakage zone allows the section to break, rather than bend, without damaging guards–all while reducing overall cutter-bar weight Austempering heat treatment gives the entire section strength and balanced wear

SECTIONS Fine-Tooth Sections – Recommended for small grains or in grassy undergrowth conditions. Coarse-Tooth Sections – Recommended for course grains green-stemmed crops like soybeans. No-Till Sections – Recommended in no-till conditions to prevent corn stalks from pinching.

Dura-Lite

Dura-Twin

No-Till Section

NUMBER

DESCRIPTION

TYPE

NORMAL PRICE>

PARTS DISCOUNTED BY 10% ON WORKSHOP INVOICE>~

900, 900F, 900R Series - 3” Cutting Systems: H207929

Dura-Lite Fine-Tooth

John Deere

H207930

Dura-Lite Coarse-Tooth

John Deere

600 Series - 4” Cutting Systems Dura-Twin Sections: H153329

Fine-Tooth

John Deere

A-H153329

Fine-Tooth

A&I

Contact your local rce & Pea tc u H heon ost m e th r fo up-to-date pricing

TECH TIP - SECTION REPLACEMENT As sections are a critical wear part of the cutter bar on platforms, they should be replaced when cut quality is compromised or when sections break. Sections work together with guards to cut the crops and should be replaced together to achieve the best cut quality.

KNIFE GUARDS Don’t discount your guards Only replacing your knives is like sharpening one side of your scissors. A dull edge on your guards can sacrifice cut quality and potentially force you to run slower, costing acres per hour.

H145791

John Deere offers green, high-wear guards that come standard from the factory. These guards go through an added boronisation process that gives them twice the wear life compared with the standard black guards. If your conditions don’t require that added wear life, the standard, black guards are case hardened all the way around. This provides a longer wear life compared to some aftermarket guards that are only induction hardened at the corners of the cutting edge. Make sure you’re using the right cutting system for your primary crop. • Long-point guards and fine tooth sections – small grains • Blunt-point guards and coarse-tooth sections – soybeans • No-till sections and guards – to help prevent corn stalks from

No-Till Blunt

hair-pinning

Blunt Point

Long Point NUMBER

DESCRIPTION

TYPE

NORMAL PARTS DISCOUNTED BY 10% PRICE> ON WORKSHOP INVOICE>~

900, 900F, 900R Series - 3” Cutting Systems: H145791

Green, Standard Heat Treated

John Deere

H153719

Silver, Double Heat Treated

John Deere

600 Series – Long Point (Small Grains): H213508

Black, Standard (Short-Long-Short)

John Deere

H213405

Black, Standard (Long-Short-Long)

John Deere

H229540

Green, High Wear (Short-LongShort)

John Deere

A-H229540

High Wear (Short-Long-Short)

A&I

H229539

Green, High Wear (Long-ShortLong)

John Deere

A-H229539

High Wear (Long-Short-Long)

A&I

Contact your local Hutcheon & Pe for the mo arce s up-to-da t te pricing

TECH TIP - REEL TINES Bent reel tines cause poor feeding and can interfere with crop lifters, intake auger and in the worst case, with the cutterbar. All of which can cause major machine damage.

2021 PRE-SEASON AFTERMARKET HARVESTER CATALOGUE

PLATFORM PARTS LITENING BOLT™ SECTIONALISED KNIVES Unlike long cutter-bars, our sectionalised knives are easy to transport in the bed of your truck. Plus, splice and joint kits allow for lightning-fast assembly and an extra-strong hold; no drilling required. Available for 3-inch and 4-inch knife drive systems.

900D DRAPER DURA-TWIN SECTIONALISED KNIVES TEETH PER INCH

25 FT. 30 FT. 36 FT. TYPE

AH155520

AH155557

AH166963

NUMBER

NORMAL PARTS DISCOUNTED BY 10% PRICE> ON WORKSHOP INVOICE>~

Head Section: AH215256

John Deere

Middle Section (reinforced): AH219604

John Deere

End Section: John Deere 1

Contact l a your loc earce n&P Hutcheo e most for th ate up-to-d pricing

John Deere John Deere

Splice Kit: AH205715

John Deere

900 SERIES COMPLETE KNIVES INCLUDING HEAD NUMBER A-SK925DF A-SK930DF A-SK936DF

DESCRIPTION

TYPE

925D COMPLETE FINE SICKLE ASSY W HEAD 930D COMPLETE FINE SICKLE ASSY W HEAD 936D COMPLETE FINE SICKLE ASSY W HEAD

NORMAL PRICE>

PARTS DISCOUNTED BY 10% ON WORKSHOP INVOICE>~

A&I A&I A&I

TECH TIP - REDUCE VIBRATION To reduce header vibration, maximise the cutter bar effectiveness by ensuring dual knife drive is timed so the knives cross over themselves in the centre of the head. Be sure to inspect for broken or worn tooth sections, knife sections and knife guards.

REEL FINGERS Reel Fingers help guide crop into the platform. John Deere reel fingers are made out of a unique high-strength poly that increases the stiffness of the fingers for increased strength. NUMBER

DESCRIPTION

TYPE

Contact your local Hutcheon & Pearce for the most up-to-date pricing

NORMAL PRICE>

AH166491

PARTS DISCOUNTED BY 10% ON WORKSHOP INVOICE>~

900 Series (-645300): H127035

Finger (Package of 100)

John Deere

900 Series (645301–685400): AH153175

Full Bat (Package of 180)

John Deere

H142315 H142314

LH Bat RH Bat

John Deere John Deere

900F (685401-), 900R (685401-), 600F, 600R, 600D (-784999), 600FD (-784999) Series: AH166489 Full Bat (Package of 10) John Deere AH166490 LH Bat (Package of 10) John Deere AH166491

RH Bat (Package of 10)

John Deere

KXE10477 No Bat (Package of 10) John Deere HXE28926 Auxiliary Finger John Deere 600D (785000-), 600FD (785000-), 700D Series: KXE10423

Finger (Package of 10)

John Deere

AUGER FINGER KITS As crop material moves to the center of the platform, auger fingers, finger bearings and finger guides deliver material to the feeder house. The fingers and bearings should be checked periodically and replaced if there is excessive play. John Deere offers two different types of auger fingers: Steel Fingers: • John Deere fingers are made out of boron steel and heat-treated for long wear • A narrow, breakaway groove in the finger protects it and allows the finger to break, rather than bend, to prevent damage to the auger Composite Fingers: • John Deere composite fingers are known for their strength and resilience in most crop conditions • Reduce damage from broken fingers

NUMBER

DESCRIPTION

TYPE

NORMAL PRICE>

AH206160

AH214869

PARTS DISCOUNTED BY 10% ON WORKSHOP INVOICE>~

900, 900F, 900R Series: AH206160

Steel Finger Kit (Set of 8)

John Deere

AH202965

Composite Finger Kit (Set of 8)

John Deere

600F, 600R Series: AH214868

Steel Finger Kit (Set of 10)

John Deere

A-AH214868

Steel Finger Kit (Set of 10)

A&I

AH214869

Composite Finger (Set of 10)

John Deere

A-AH214869

Composite Finger (Set of 10)

A&I

2021 PRE-SEASON AFTERMARKET HARVESTER CATALOGUE

PLATFORM PARTS

Contact l a your loc earce P & n o e Hutch e most for th ate up-to-d pricing

REEL TINE FLIP-OVER KIT

Reduce wrapping of crop material in tough, wet, viny crops (such as soybeans, peas, straight-cut edible beans, and canola) with the reel tine flip-over kit, which also increases visibility to the front of the draper. NUMBER BXE10262 BXE10263 BXE10760 BXE10761 BXE10873 BXE10874

DESCRIPTION

NORMAL PRICE>

Type

625D, 630D, 635D (MY08–16) and 630FD, 635FD (MY12–15) 640D (MY08–16) and 640FD (MY12–15) 630FD and 635FD (MY16-) 640FD and 645FD (MY16-) 625D, 630D, 635D (MY17) and 725D, 730D, 735D (MY18-) 640D (MY17 and 740D (MY18-)

PARTS DISCOUNTED BY 10% ON WORKSHOP INVOICE>~

John Deere John Deere John Deere John Deere John Deere John Deere

HEADER HEIGHT SENSORS FOR RIGID MODE This height-sensing bundle for 620F, 622F, 625F, 630F, and 635 HydraFlex™

Platforms adapts ground-contacting sensors for use when the flex cutter-bar is locked into the rigid position. For use with 50-, 60-, 70-, and S-Series combines. NUMBER

APPLICATION

Type

BXE10119

MY11 and newer 600 Series Flex Platforms

John Deere

NORMAL PRICE>

PARTS DISCOUNTED BY 10% ON WORKSHOP INVOICE>~

HEADER HEIGHT SENSORS FOR RIGID MODE The short crop dividers are recommend for small grains and standing drilled beans. The dividers knock down less crop and are a direct replacement for the Long crop dividers. NUMBER

DESCRIPTION

Type

NORMAL PRICE>

AH147232

PARTS DISCOUNTED BY 10% ON WORKSHOP INVOICE>~

900, 900F, 600F, 630FD (-784999), 635FD (-784999), 640FD (-784999): AH147232

Crop Divider

John Deere

630FD (785000-), 635FD (785000-), 640FD (785000-), 645FD: KXE10397

Crop Divider (Set of 2)

John Deere

CROP FEEDING ENHANCEMENTS Feed Drum Anti-Wrap Kit – This kit is recommended for tall, damp crop conditions to reduce drum wrapping. The attachment consists of two brackets that mount near the outer edge of the feed drum and reduce the likelihood of crop wrapping the drum. Center Section Seal Kit – This kit minimises grain loss when direct-cutting canola and can be utilised for other small grain crops. NUMBER

DESCRIPTION

Feed Drum Anti-Wrap Kit: BXE10736 600D Series BXE10039 600FD Series (-764999) BXE10408 600FD Series (765000-) Center Section Seal Kit: BXE10851 600D, 700D Series BXE10959

600FD/700FD Series

NORMAL PRICE>

TYPE

PARTS DISCOUNTED BY 10% ON WORKSHOP INVOICE>~

John Deere John Deere John Deere John Deere John Deere >All prices shown in Australian Dollars including GST. Images are for illustrative purposes only. Current prices effective as of January 2021. Prices are subject to change after this period. ~Discount only applies if Inspections are committed to by February 28 2021 and repair quote accepted within 30 days of receiving.

STS & S-SERIES COMBINE PARTS STS & S-SERIES COMBINE BATTERIES trongBox batteries are built tough to meet demanding John Deere factory S specifications. No other brand compares with the high-quality construction and internal and external components. For a more economical alternative, our Performance branded batteries can offer a great solution in lighter-use applications. NORMAL PRICE>

NUMBER

DESCRIPTION

TYPE

TY25879AAU

9560, 9660, 9760, 9860, 9570, 9670, 9770, 9870, S550, S650, S660, S670

StrongBox

CP6828AAU

Performance

TY26783AAU

9560, 9660, 9760, 9860, 9570, 9670, 9770, 9870, S550, S650, S660, S670 S680, S690

CP6846AAU

S680, S690

Performance

PARTS DISCOUNTED BY 10% ON WORKSHOP INVOICE>~

StrongBox

STS- AND S-SERIES FEEDERHOUSE CHAIN NUMBER

DESCRIPTION

TYPE

9560, 9570, S550: AH231006

Feederhouse Chain

John Deere

A-AH231006

Feederhouse Chain

A&I

NORMAL PARTS DISCOUNTED BY 10% PRICE> ON WORKSHOP INVOICE>~

9650, 9750, 9660, 9760, 9860, 9670, 9770, 9870: AH224926 Feederhouse Chain John Deere A-AH224926 Feederhouse Chain A&I S650, S660, S670, S680, S690 below Serial Number -775001: AXE24307 Feederhouse Chain John Deere

Contact your local Hutcheon & Pearce for the most up-to-date pricing

A-AXE24307 Feederhouse Chain A&I S650, S660, S670, S680, S690 above Serial Number - 775001: AXE27247

Feederhouse Chain

John Deere

A-AXE27247 A-AXE24307LS A-AXE24247LS

Feederhouse Chain 3 Strand Feeder Chain less slats 4 Strand Feeder Chain less slats

A&I A&I A&I

Note: Part pricing may differ depending on model & serial number breaks the above is just a guide, always check with your H&P Branch for current pricing.

TECH TIP - FEEDERHOUSE CHAIN Excessive tension is a major cause of feederhouse conveyor chain wear. It is normal for center strands to sag more because of the weight of the slat and the upward force of crop material. A chain that has too much tension will get tighter as the chain conveys and could cause shaft and bearing failures.

HIGH-TORQUE VARIABLE SPEED FEEDERHOUSE DRIVE Get the high-capacity drive power you need to harvest high-yielding corn at faster ground speeds. Compared to standard variable feederhouse drives, this heavy-duty drive offers stronger belts and larger gears along with more durable shafts and bearings. (Not for use with 612 StalkMaster Corn Head. Combine must be equipped with heavyduty feederhouse drive).

NUMBER DESCRIPTION

TYPE

NORMAL PRICE>

PARTS DISCOUNTED BY 10% ON WORKSHOP INVOICE>~

9660, 9760, 9860, 9670, 9770, 9870, S660, S670, S680, S690: BH84447

High-Torque Feederhouse Drive

John Deere

2021 PRE-SEASON AFTERMARKET HARVESTER CATALOGUE

STS & S-SERIES COMBINE PARTS STS- AND S-SERIES THRESHING ELEMENTS It is important to note that three different threshing element designs are needed for the Bullet Rotor: • First Row of Front Cone: Requires one kit of (3) threshing elements designed for mounting on the front surface of the front cone. • Second Row of Front Cone: Requires one kit of (3) threshing elements designed for mounting on the surface of the mid-section of the front cone. • Rear Portion: Requires three kits of (3) threshing elements designed to mount on the rear portion of the rotor. All threshing elements listed below are available in kits of (3) only. To maintain rotor balance, all three must be installed in a row around the circumference of the rotor. NUMBER

DESCRIPTION

NORMAL PRICE>

TYPE

PARTS DISCOUNTED BY 10% ON WORKSHOP INVOICE>~

Corn and Grain Elements for 9560, 9570, S550: AH219770 1st Row John Deere Standard Wear Rifled AH219771 2nd Row John Deere Standard Wear Rifled KXE10160 3rd–5th Row John Deere Standard Wear Rifled AH219773 3rd–5th Row John Deere High-Wear Rifled Corn and Grain Elements for 9660, 9760, 9860, 9670, 9770, 9870, S650, S660, S670, S680, S690: AH216674 A-AH216674 AH216675 A-AH216675 AH216677 A-AH216677 AH216678 A-AH216678

1st Row 1st Row 2nd Row 2nd Row 3rd–5th Row 3rd–5th Row 3rd–5th Row 3rd–5th Row

John Deere Standard Wear Rifled A&I Products High-Wear Rifled John Deere Standard Wear Rifled A&I Products High-Wear Rifled John Deere Standard Wear Rifled A&I Products Standard Wear Rifled John Deere High-Wear Rifled A&I Products High-Wear Rifled

ct Conta cal o your l Pearce n eo & Hutch the most for -date up-to ing pric

STS- AND S-SERIES SEPARATOR TINES All separator tines listed below are available in kits of (3) only. To maintain rotor balance, all three must be installed in a row around the circumference of the rotor.

NUMBER

DESCRIPTION

TYPE

NORMAL PRICE>

PARTS DISCOUNTED BY 10% ON WORKSHOP INVOICE>~

9560, 9570, S550: AH209452 Standard John Deere 9650, 9750, 9660, 9760, 9860, 9670, 9770, 9870, S650, S660, S670, S680, S690: AH208554 Standard John Deere A-AH208554 Standard A&I Products AH209123 High Wear John Deere A-AH209123 High Wear A&I Products

TECH TIP - KEEP A CLEARANCE GAUGE HANDY. John Deere offers a convenient gauge that measures wear on threshing elements, separator tines, and concaves to help you know when it’s time to replace them. Order yours today Combine Clearance Gauge: AH204933

STS & S-SERIES COMBINE PARTS STS- AND S-SERIES CONCAVES •

• •

mall-Wire Concaves are standard on small-grain combines and S are recommended for use in wheat, barley, and other cereal crops. Additionally, they are recommended for use in specialty crops such as grass seed. Large-wire concaves are standard on rice combines and available as an option on corn and small-grain combines. They are recommended for rice, sorghum, soybeans, and corn. Round Bar Concaves are standard equipment on corn combines and are recommended for use in corn and soybeans. Additionally, they are recommended for use in specialty crops such as edible beans and food corn.

Contact your local Hutcheon & Pearce for the most up-to-date pricing

Concaves listed below come in sets of three. NUMBER

DESCRIPTION

NORMAL PRICE>

TYPE

PARTS DISCOUNTED BY 10% ON WORKSHOP INVOICE>~

Small-Wire Concaves (9560, 9570, S550): BH84289

Standard Wear

John Deere

Small-Wire Concaves (9650, 9750, 9660, 9760, 9860, 9670, 9770, 9870, S650, S660, S670, S680, S690): BXE10388 Standard Wear John Deere BXE10389 High Wear John Deere Large-Wire Concaves (9560, 9570, S550): BH84290 Standard Wear John Deere Large-Wire Concaves (9650, 9750, 9660, 9760, 9860, 9670, 9770, 9870, S650, S660, S670, S680, S690): BXE10390 Standard Wear John Deere BXE10391 High Wear John Deere Round Bar Concaves (9560, 9570, S550): BH84291 Standard Wear John Deere Round Bar Concaves (9650, 9750, 9660, 9760, 9860, 9670, 9770, 9870, S650, S660, S670, S680, S690): BXE10387 High Wear John Deere

NUMBER

DESCRIPTION

TYPE

A-AXE28958

Small Wire STD wear concave

A&I

A-AH205255HB A-AXE28957 A-STSFL

Small Wire Helical STD Wear Concave Round Bar Extended Wear Concave Front Lip A&I concave

A&I A&I A&I

A-BH84308

Insert Bars Concave

A&I

NORMAL PRICE>

PARTS DISCOUNTED BY 10% ON WORKSHOP INVOICE>~

STS- AND S-SERIES CONCAVE INSERTS Concave inserts provide the additional threshing action required for harvesting small grains with the round bar concaves. Concave inserts are easy to install and remove as you switch between crops.

NUMBER

DESCRIPTION

TYPE

NORMAL PRICE>

PARTS DISCOUNTED BY 10% ON WORKSHOP INVOICE>~

Concave Inserts (9560, 9570, S550): BH84294 Set of 2 John Deere Concave Inserts (9650, 9750, 9660, 9760, 9860, 9670, 9770, 9870, S650, S660, S670, S680, S690): BH84308 Set of 2 John Deere

2021 PRE-SEASON AFTERMARKET HARVESTER CATALOGUE

STS & S-SERIES COMBINE PARTS STS- AND S-SERIES ELEVATOR CHAINS Elevator chains should be checked for stretch and adjusted or replaced as required. The rubber paddles can develop rounded corners and edges, resulting in grain leakage. NUMBER

DESCRIPTION

NORMAL PRICE>

TYPE

PARTS DISCOUNTED BY 10% ON WORKSHOP INVOICE>~

Clean Grain Elevator Chain: AXE28559 A-AXE28559 AXE28560

9650, 9750, 9560, 9660, 9760, 9860, 9570, John Deere 9670, S550, S650, S660 9650, 9750, 9560, 9660, 9760, 9860, 9570, A&I 9670, S550, S650, S660 9770, 9870, S670, S680

John Deere

A-AXE28560 9770, 9870, S670, S680 AXE16681 S690 Tailings Elevator Chain:

A&I John Deere

AH148021

John Deere

A-AH148021 AXE10556 AXE47615

9650, 9750, 9560, 9660, 9760, 9860, 9570, 9670, 9770, 9870, S550, S650, S660, S670 9650, 9750, 9560, 9660, 9760, 9860, 9570, 9670, 9770, 9870, S550, S650, S660, S670 S680 (-785000), S690 (-785000) S680 (785001-), S690 (785001-)

A&I John Deere John Deere

Contact l a your loc earce & n P Hutcheo e most for th ate up-to-d pricing

TECH TIP - ELEVATOR CHAIN WEAR The most common reason for excessive elevator chain wear is too much tension. A chain that has too much tension will get tighter as the chain conveys material and could cause shaft and bearing failures. Check elevator chain for worn or missing paddles. In wet harvesting conditions, you should install extra steel paddle sets to act as a wiper.

STS- AND S-SERIES SHOE GRAIN SUPPLY AUGERS Make sure the cleaning shoe auger gears are properly adjusted to prevent excessive wear. Once the gears touch, back off the clamp 0.8 mm (1/32-in.). Do not run the gears too tight. NORMAL PRICE>

NUMBER

DESCRIPTION

TYPE

AH146786

LH (All STS- and S-Series)

John Deere

A-AH146786 AH146787 A-AH146787

LH (All STS- and S-Series) RH (All STS- and S-Series) RH (All STS- and S-Series)

A&I Products John Deere A&I Products

PARTS DISCOUNTED BY 10% ON WORKSHOP INVOICE>~

TECH TIP - STRAW CHOPPER KNIVES Always replace chopper knives in pairs – i.e. both sides – to make sure the rotor stays properly balanced.

STS & S-SERIES COMBINE PARTS STS- AND S-SERIES VERTICAL UNLOADING AUGERS There are three different types of vertical augers: Regular – Standard wear were base equipment on S550, S650, and S660 combines High Wear – Option on S550, S650, and S660 combines High Wear/High Unloading Rate – Standard on S670, S680, and S690

NUMBER

DESCRIPTION

TYPE

9650, 9750, 9560, 9660, 9760, 9570, 9670, S560: AH146840 Regular A-AH146840 Regular AH164070 High Wear A-AH164070 High Wear 9660, 9760, 9860, 9670, 9770, 9870: AXE12921 High Wear/High Unloading Rate A-AXE12921 High Wear/High Unloading Rate S550, S650, S660 AXE53848 Regular AXE53849 High Wear S660, S670, S680, S690: AXE18070 High Wear/High Unloading Rate A-AXE18070 High Wear/High Unloading Rate

NORMAL PRICE>

PARTS DISCOUNTED BY 10% ON WORKSHOP INVOICE>~

John Deere A&I Products John Deere A&I Products John Deere A&I Products John Deere John Deere John Deere A&I Products

STS- AND S-SERIES STRAW CHOPPER KNIVES John Deere 70- and S-Series combines use a unique wing blade. The wing blade design moves more air, providing an even spread of material across the entire width of the cutting platform. The cutting edge of the wing blade is made of wear-resistant material that extends wear life. Chopper balance must be maintained. Follow operator manual to ensure proper blades are replaced. Depending on type of chopper, either 6 or 8 blades must be replaced to keep balance.

NUMBER

DESCRIPTION

TYPE

NORMAL PRICE >

PARTS DISCOUNTED BY 10% ON WORKSHOP INVOICE>~

9650, 9750, 9660, 9760, 9860 AH205910 Straight Blade A-AH205910 Straight Blade AH205909 Paddle Blade A-AH205909 Paddle Blade 9570, 9670, 9770, 9870, S550 AH225937 Wing Blade A-AH225937 Wing Blade AH225940 Scoop Blade A-AH225940 Scoop Blade S660, S670, S680, S690

John Deere A&I Products John Deere A&I Products

KXE10255 KXE10256 A-KXE10256

John Deere John Deere A&I Products

Wing Blade Straight Blade Straight Blade

John Deere A&I Products John Deere A&I Products

Contact your local Hutcheon & Pear ce for the most up-to-date pricing

2021 PRE-SEASON AFTERMARKET HARVESTER CATALOGUE

HOT

HOT PRICES!

PRICE!

DON’T MISS OUT ON THESE GREAT DEALS! NUMBER

DESCRIPTION

TYPE

JD-925D,930D,936D

A&I Products

NORMAL PRICE>

HOT PRICE>

WOBBLE BOX A-DE19786

STRAW WALKER RISER, CENTRE A-AH209840

JD-9500,9500SH,9510,9510SH,9550,9550SH, A&I Products 9560,9560SH,9600

STRAW WALKER A-AH210334

JD-9500,9500SH,9510,9510SH,9550,9550SH, A&I Products 9560,9560SH,9600

FEEDERHOUSE FLOOR A-AH218352

JD-9650STS, 9660STS,9670STS,9750STS9760 John Deere STS,9770STS

LANKOTA UNLOADING AUGER EXTENSION KITS FOR JOHN DEERE LANAUGHURK LANAUG702K

Unloading auger extension kit for JD® 60, 70, & “S” Series combines with 17” High, Lankota Unloading Rate auger (HUR). Unloading auger extension kit for JD® 6620 Lankota to 9750 combines.

GRAIN TANK CROSS AUGER CLUTCH SHUT-OFF SYSTEM LANUDJD1000K LANUDJD2000K LANUDJD3000K LANUDJD4000K

For use with JD® 9560W – S670 combines For use with JD® S680 & S690 combines. For use with JD® S550, S650, 9560, 9570 and all 50 series and STS combines

Lankota Lankota

For use with JD® 00 & 10 series combines

Lankota

CIH AUGUR EXTENSION Case IH® - 3' Unloading auger extension kit LANAUGCIHK Lankota for CIH 1440-2388 GRAIN TANK CROSS AUGER CLUTCH SHUT-OFF SYSTEM - Models that Case IH® clutch system fits LANUDCIH2000K Case IH® - 6088 and 7088 Series Combines A&I Products

Contact your local Hutcheon & Pearc for the mos e t up-to-date pricing

WALKER COMBINE PARTS WALKER COMBINE BATTERIES StrongBox batteries are built tough to demanding John Deere factory specifications. No other brand compares with the high-quality construction and internal and external components. For a more economical alternative, our Performance branded batteries can offer a great solution in lighter-use applications. NUMBER TY25272AAU CP6825AAU

DESCRIPTION 9000, 9010, 9050, 9060 Series 9000, 9010, 9050, 9060 Series

NORMAL PRICE>

PARTS DISCOUNTED BY 10% ON WORKSHOP INVOICE>~

StrongBox

$292.55

$263.30

Performance

$177.17

$159.45

TYPE

BATTERY BOOST TERMINAL KIT Ease the hassle of charging your combine’s battery. Convenient location makes it easy to jump-start or charge your battery at ground level. No need to lug a battery charger and booster cables up your combine’s ladder to jump-start the battery. NUMBER

DESCRIPTION

TYPE

AH224079

9000, 9010, 9050, 9060 Series

John Deere

NORMAL PRICE>

PARTS DISCOUNTED BY 10% ON WORKSHOP INVOICE>~

$250.94

$225.85

WALKER COMBINE FEEDERHOUSE CHAIN Excessive tension is a major cause of feederhouse conveyor chain wear. It is normal for center strands to sag more because of the weight of the slat and the upward force of crop material. NUMBER

DESCRIPTION

TYPE

NORMAL PRICE>

PARTS DISCOUNTED BY 10% ON WORKSHOP INVOICE>~

Feederhouse Chain (9400, 9410, 9450, 9500, 9510, 9550, 9560): AH137604 A-AH137604 AH207777 A-AH207777 AH137845

28 Slat 28 Slat 34 Slat 34 Slat 49 Slat

John Deere A&I Products John Deere A&I Products John Deere

A-AH137845

49 Slat

A&I Products

Feederhouse Chain (9600, 9610, 9650, 9660): AH207778 51 Slat A-AH143399 51 Slat AH143400 74 Slat A-AH143400 74 Slat Feederhouse Repair Slats (Bolt-On): 9400, 9410, 9450, 9500, H206436 9510, 9550, 9560 9400, 9410, 9450, 9500, A-H206436 9510, 9550, 9560 H207776 9600, 9610, 9650, 9660 A-H207776 9600, 9610, 9650, 9660

John Deere A&I Products John Deere A&I Products John Deere A&I Products John Deere A&I Products

2021 PRE-SEASON AFTERMARKET HARVESTER CATALOGUE

Contact your local Hutcheon & Pe arce for the most up-to-date pricing

WALKER COMBINE PARTS FEEDERHOUSE DRUM STOP KIT

The quick, easy way to change your combine’s front feederhouse drum height. Simply remove the retaining pin and position the left- and right-hand levers to the desired position for small grain or corn. Kit is not for sidehill combines. NUMBER

DESCRIPTION

TYPE

AH210753

9000, 9010, 9050 Series

John Deere

NORMAL PRICE>

RASP BARS

PARTS DISCOUNTED BY 10% ON WORKSHOP INVOICE>~

Black-Hardened

John Deere Black-Hardened Rasp Bars Serrated rasp bar has a gently contoured surface design that wears to an even, smooth profile • Recommended for use in harvesting corn, popcorn, soybeans, malting barley, edible beans, or any seed crop where high quality grain is demanded. John Deere Chrome-Hardened Rasp Bars • Provide twice the wear life of the non-chromed rasp bars • Feature a smooth, contoured profile design with sharp surface edges • Ideal for general use in all crops where long-lasting, efficient threshing performance is desired

NUMBER

DESCRIPTION

TYPE

NORMAL PRICE>

Chrome-Hardened

PARTS DISCOUNTED BY 10% ON WORKSHOP INVOICE>~

Rasp Bars (9400, 9410, 9450, 9500, 9510, 9550, 9560) Black-Hardened AH205117 LH (Set of 5) John Deere AH205118 RH (Set of 5) John Deere Includes 5 x LH, 5 x RH, and HardA&I Products A-V12068H ware Chrome-Hardened AH205119 LH (Set of 5) John Deere AH205120 RH (Set of 5) John Deere Includes 5 x LH, 5 x RH, and HardA&I Products A-V12068C ware Rasp Bars (9600, 9610, 9650, 9660) Black-Hardened AH205122 LH (Set of 5) John Deere AH205123 RH (Set of 5) John Deere Includes 5 x LH, 5 x RH, and HardA&I Products A-V12072H ware Chrome-Hardened AH205124 LH (Set of 5) John Deere AH205125 RH (Set of 5) John Deere A-V12072C Includes LH, RH, and Hardware A&I Products

WALKER COMBINE PARTS CONCAVES John Deere Concaves • Strict manufacturing processes maintain the correct radius of the concave with a tolerance of 5/64-in. • Flame-cut sidebars ensure easier gauging of the concave-to-cylinder clearance • Deeper crossbars and support bars reduce concave bending • 13-bar concave was standard on corn and small grain combines NORMAL PRICE>

NUMBER

DESCRIPTION

TYPE

AH150497 A-AH150497 AH136605 A-AH136605 AH135647 AH150496 A-AH150496 AH136604 AH135646

13-Bar 13-Bar 14-Bar 14-Bar Spike Tooth 13-Bar 13-Bar 14-Bar Spike Tooth

John Deere A&I Products John Deere A&I Products John Deere John Deere A&I Products John Deere John Deere

AH150497

PARTS DISCOUNTED BY 10% ON WORKSHOP INVOICE>~

CLEAN GRAIN AND TAILINGS ELEVATOR CHAINS Elevator chains should be checked for stretch and adjusted or replaced as required. The rubber paddles can develop rounded corners and edges, resulting in grain leakage. The most common reason for excessive elevator chain wear is too much tension. A chain that has too much tension will get tighter as the chain conveys material and could cause shaft and bearing failures.

NUMBER

DESCRIPTION

TYPE

Clean Grain Elevator Chain AH162441 9400, 9410, 9500, 9510

John Deere

A-AH162441

A&I Products

9400, 9410, 9500, 9510

AH162442 9600, 9610 A-AH162442 9600, 9610 AH162058 9450, 9550, 9560, 9650, 9660 A-AH162058 9450, 9550, 9560, 9650, 9660 Tailings Elevator Chain AH131074 9000, 9010, 9050, 9060 Series A-AH131074 9000, 9010, 9050, 9060 Series

PARTS DISCOUNTED BY 10% NORMAL PRICE> ON WORKSHOP INVOICE>~

John Deere A&I Products John Deere A&I Products John Deere A&I Products

Contact your local Hutcheon & Pearce for the most up-to-date pricing

2021 PRE-SEASON AFTERMARKET HARVESTER CATALOGUE

WALKER COMBINE PARTS SHOE GRAIN SUPPLY AUGERS Make sure the cleaning shoe auger gears are properly adjusted to prevent excessive wear. Once the gears touch, back off the clamp 0.8 mm (1/32-in.). Do not run the gears too tight.

NUMBER

DESCRIPTION

TYPE

AH169020

LH Flighting (9000, 9010, 9050, 9060 Series) LH Flighting (9000, 9010, 9050, 9060 Series)

John Deere

RH Flighting (9000, 9010, 9050, 9060 Series) RH Flighting (9000, 9010, 9050, 9060 Series)

John Deere

A-AH169020 AH169021 A-AH169021

NORMAL PRICE>

PARTS DISCOUNTED BY 10% ON WORKSHOP INVOICE>~

A&I Products

VERTICAL UNLOADING AUGERS NUMBER

DESCRIPTION

TYPE

Regular – Standard auger from the factory on 9000, 9010, 9050 Series AH124852 9400, 9410, 9500, 9510, 9600, 9610 John Deere A-AH124852 9400, 9410, 9500, 9510, 9600, 9610 A&I Products AH171550 9450 (695101-), 9550 (695201-), John Deere 9560, 9650 (695301-), 9660 A-AH171550 9450 (695101-), 9550 (695201-), A&I Products 9560, 9650 (695301-), 9660 Grass – Double-flighted auger provides gentler crop handling AH140081 9400, 9410, 9450 (-695100), 9500, John Deere 9510, 9550 (-695200), 9600, 9610, 9650 (-695300) AH171558 9450 (695101-), 9550 (695201-), John Deere 9560, 9650 (695301-), 9660 High Wear – Constructed with heavy-duty segmented flighting AH154962 9400, 9410, 9500, 9510, 9600, 9610 John Deere A-AH154962 9400, 9410, 9500, 9510, 9600, 9610 A&I Products AH171554 A-AH171554

9450 (695101-), 9550 (695201-), 9560, 9650 (695301-), 9660 9450 (695101-), 9550 (695201-), 9560, 9650 (695301-), 9660

John Deere A&I Products

NORMAL PRICE>

PARTS DISCOUNTED BY 10% ON WORKSHOP INVOICE>~

Contact your local Hutcheon & Pearce for the most up-to-date pricing

Contact l a your loc earce P & n Hutcheo e most h t for ate up-to-d in ic pr g

WALKER COMBINE PARTS

STRAW CHOPPER KNIVES Chopper balance must be maintained. Follow operator manual to ensure proper blades are replaced. Depending on type of chopper, either 6 or 8 blades must be replaced to keep balance.

NUMBER

DESCRIPTION

NORMAL PRICE>

TYPE

PARTS DISCOUNTED BY 10% ON WORKSHOP INVOICE>~

Regular Cut Straw Chopper (One Straight Blade per Support) AH124635

9000, 9010, 9050, 9060 Series

John Deere

Fine Cut Straw Chopper (Two Straight Blades per Support) AH205910 9000, 9010, 9050, 9060 Series John Deere A-AH205910 9000, 9010, 9050, 9060 Series A&I Wide Spread Fine Cut Straw Chopper (Two Paddle Blades per Support) AH205909 9000, 9010, 9050, 9060 Series John Deere A-AH205909 9000, 9010, 9050, 9060 Series A&I

GRAIN TANK CLEANOUT KIT A great way to get your grain tank cleaned out before changing crops or storing your combine for the season. Simply hang a bucket on the hinge of this high-density polyethylene chute, unsnap the access door, and capture grain without spilling. It works for draining moisture as well. NUMBER

DESCRIPTION

TYPE

AH167433 A-AH167433

9000, 9010, 9050, 9060 Series 9000, 9010, 9050, 9060 Series

John Deere A&I Products

NORMAL PRICE>

PARTS DISCOUNTED BY 10% ON WORKSHOP INVOICE>~

ADDITIONAL GRAIN TANK SENSOR Installing an additional grain-level sensor enables an operator to more easily tell when the grain tank is full when harvesting on sidehills.

NUMBER

DESCRIPTION

TYPE

BH78464

9050, 9060 Series

John Deere

NORMAL PRICE>

PARTS DISCOUNTED BY 10% ON WORKSHOP INVOICE>~

2021 PRE-SEASON AFTERMARKET HARVESTER CATALOGUE

JOHN DEERE GENUINE COMBINE ATTACHMENTS ACTIVEYIELD™ RETROFIT KIT ctiveYield maximises the system’s accuracy with no effort or time A away from harvest. Every field, every variety, ActiveYield delivers quality yield data. ActiveYield senses the weight of the grain in the grain tank as it fills. The combine uses the weight information to calibrate the yield system continually throughout harvest. This gives the operator optimised system accuracy and reliable yield data.

Contact your local Hutcheon & Pearce for the most up-to-date pricing

*Compatible with corn, soybeans, wheat, barley, and canola. *Not compatible with S660 and S760 with manual grain tank extensions.

NUMBER BXE10503 BXE10797

APPLICATION

TYPE

MY12–MY15 S-Series Combines MY16- S-Series Combines

NORMAL PRICE>

PARTS DISCOUNTED BY 10% ON WORKSHOP INVOICE>~

John Deere John Deere

GRAIN TANK MIRROR KIT dd the Grain Tank Mirror Kit to any S-Series Combine to A increase visibility of the grain tank. NUMBER

TYPE

KXE10458

John Deere

NORMAL PRICE>

PARTS DISCOUNTED BY 10% ON WORKSHOP INVOICE>~

FOOT PEGS Improve comfort while harvesting with this simple upgrade. Foot pegs can be installed on all S-Series Combines going back to MY12. NUMBER

TYPE

KXE10454

John Deere

NORMAL PRICE>

PARTS DISCOUNTED BY 10% ON WORKSHOP INVOICE>~

ADDITIONAL GRAIN TANK SENSOR he fast, easy way to tell if your grain tank is full when harvesting on T sidehills. Includes mounting hardware and clamps.

NUMBER

APPLICATION

TYPE

BH81598 BXE10270

70 Series S-Series

John Deere John Deere

NORMAL PRICE>

PARTS DISCOUNTED BY 10% ON WORKSHOP INVOICE>~

JOHN DEERE GENUINE COMBINE ATTACHMENTS UNLOADING AUGER BOOT he Unloading Auger Boot on current-model combines is now available as T a retrofit for all high-unloading rate systems (3.2/3.8 bps). The design of the unloading auger boot delivers a more controlled stream of crop to the grain-handling equipment.

NUMBER

TYPE

HXE71069

John Deere

NORMAL PRICE>

PARTS DISCOUNTED BY 10% ON WORKSHOP INVOICE>~

IN-CAB MOBILE DEVICE MOUNTING Enjoy hands-free access and improved viewing of your iPad®, iPhone®, or other mobile device from the seat of your cab. These mounting brackets are adjustable, providing easy access without interfering with visibility or machine controls. NUMBER BXE10481 BXE10477 BXE10480 BXE10479 BRE10015 BXE10901 BXE10864

DESCRIPTION

NORMAL PRICE>

TYPE

Guide Bar (MY12–MY13 S600 Series) Guide Bar (MY14–MY17 S600 Series) Slide Kit (MY12–17 S600 Series) Tablet Mount (MY12–17 S600 Series) Cell Phone Mount (MY12–17 S600 Series) 9–10-in. Tablet Mount (S700 Series) 11–12-in. Tablet Mount (S700 Series)

PARTS DISCOUNTED BY 10% ON WORKSHOP INVOICE>~

John Deere John Deere John Deere

Contact your local Hutcheon & Pearce for the most up-to-date pricing

John Deere John Deere John Deere John Deere

GT-5300 GRAIN MOISTURE TESTER The GT-5300 provides all the benefits of our MoistureMatch Grain Moisture Tester (SW08120) and more. Featuring cutting-edge technology, the GT-5300: • Automatically averages a selectable number of tests • Provides the actual moisture-limit percentage • Stores user calibration and averages for each grain • Offers a larger, illuminated LCD display NUMBER

DESCRIPTION

TYPE

SW08120

Grain Moisture Tester

John Deere

NORMAL PRICE>

PARTS DISCOUNTED BY 10% ON WORKSHOP INVOICE>~

2021 PRE-SEASON AFTERMARKET HARVESTER CATALOGUE

LANKOTA COMBINE ATTACHMENTS

Contact your local Hutcheon & Pearc e for the most up-to-date pricing

LANKOTA UNLOADING AUGER EXTENSION KITS FOR JOHN DEERE Guideline for determining machine’s auger size: NON-HUR augers are 13.5” in diameter, or approximately 43” in circumference. • LANAUGHURK - Unloading auger extension kit for JD® 60, 70, & “S” Series combines with 17” High Unloading Rate auger (HUR). Extends the length of factory unloading auger by 4 feet. Not recommended for use with the factory 28.5’ auger. Do not use on folding augers. • LANAUG1135K - Unloading auger extension kit for JD® 60, 70, & “S” Series combines with 13.5” standard auger (non-HUR). Extends the length of factory unloading auger by 3.5 feet. • LANAUG702K - Unloading auger extension kit for JD® 6620 to 9750 combines. Also fits any CTS Combine. Extends the length of factory unloading auger by 3 feet.

NUMBER LANAUGHURK

LANAUG1135K LANAUG702K

DESCRIPTION

TYPE

NORMAL PARTS DISCOUNTED BY 10% PRICE> ON WORKSHOP INVOICE>~

Unloading auger extension kit for JD® 60, 70, & “S” Series combines with 17” High, Unload- Lankota ing Rate auger (HUR). Unloading auger extension kit for JD® 60, 70, & “S” Series combines with 13.5” standard Lankota auger (non-HUR). Unloading auger extension kit for JD® 6620 to Lankota 9750 combines.

LANKOTA GRAIN TANK CROSS AUGER CLUTCH SHUT-OFF SYSTEM This system will allow the operator to empty out the unloading auger without the grain tank being empty. This system is operated by a foot switch in the cab. Extremely easy to install. Start and stop the augers as you wish while unloading on the go!

NUMBER

APPLICATION

Models that John Deere® clutch system fits: For use with JD® 9560W – S670 LANUDJD1000K combines For use with JD® S680 & S690 LANUDJD2000K combines. For use with JD® S550, S650, 9560, LANUDJD3000K 9570 and all 50 series and STS combines For use with JD® 00 & 10 series LANUDJD4000K combines

TYPE

NORMAL PARTS DISCOUNTED BY 10% ON WORKSHOP INVOICE~ PRICE>

Lankota Lankota Lankota Lankota

AND BETTER BETTER. ANDBETTER BETTER.

BETTER. AND BETTER.

500 HOUR DRAIN INTERV^AL^

NEW CJ-4 SPEC

™ ™ TORQ-GARD ENGINE TORQ-GARD ENGINE OIL OIL

OIL

™ ™ PLUS-50 II ENGINE PLUS-50 II ENGINE OIL OIL API CK-4 INDUSTRY RATING

API CJ-4/SN INDUSTRY RATING

. Better and better. It isn't just about improving our products. It's about the right oil for the right job. New formulation Torq-Gard™, and Plus-50 II™ with extended drain interval^ capabilities. Better and better Better and just about aboutimproving improving our products. Better andbetter. better. ItIt isn’t isn’t just our products. It’s It’s about the right oil for the respectively. about the right oil for the right job. New formulation Torq-Gard™, right job. New formulation Torq-Gard, and Plus-50 II with extended drain interval^ capabilities. Your JohnII™ Deere dealer hasYour all the maintenance optionsthe you need, no matter what you are running or your ^ capabilities. and Plus-50 with extended drain interval Better and better respectively. John Deere dealer has all Better maintenance options you budget. Ask today about the engine oil that's right for you and equipment. and better respectively. need, no matter what you are running or your budget. Ask today aboutyour the engine oil that’s Hutcheon & Pearce have all the maintenance options you need, no right for you and your equipment. Visit us in store to find out more. matter what you are running or your budget. Ask today about the Contact us today to find out more. engine oil that’s right for you and your equipment. ^500 hour drain interval applies to John Deere diesel engines when the following criteria

are met: 1. Engine is equipped with an extended drain interval oil pan. 2. Machine operates with Plus-50 II engine oil API CK-4. 3. Machine uses a John Deere engine oil filter. 4. Machine uses only ultra low sulphur diesel fuel.

Visit your local Hutcheon & Pearce Branch to find out more. 2021 PRE-SEASON AFTERMARKET HARVESTER CATALOGUE

^500 hour drain interval applies to John Deere diesel engines when the following criteria are met: 1. Engine is equipped with an extended drain interval oil pan. 2. Machine operates with Plus-50 II engine oil API CK-4. 3. Machine uses a John Deere engine oil filter. 4. Machine uses only ultra low sulphur diesel fuel.

JOHN DEERE OILS PLUS-50™ II PREMIUM ENGINE OIL Plus-50™ II is a premium Engine oil and is the next generation of superior John Deere engine oil. Plus-50™ II protects up to 500 hours, when used with John Deere filters in John Deere engines, saving you money on maintenance while giving you added peace of mind. Applications l For use in heavy-duty off-road applications, on-road trucks, marine engines, natural gas engines, pickups, and automobiles l Backwards compatible for use in all legacy diesel engine applications where Plus-50™ may have been applied l For use in John Deere IT4 engines and all diesel engines requiring API CJ-4 oil

PACKS AVAILABLE 5L

CP6657

20L

CP6658

205L

CP6659

1000L

CP6660

Specifications SAE 15W-40, API CJ-4, CI-4 PLUS, CI-4, CH-4, CG-4, SM, SL, SJ, ACEA E9, E7, JASO GH-2

HY-GARD™ TRANSMISSION OIL Hy-Gard™ is a hydraulic and transmission oil formulated to protect heavilyloaded gears, wet brakes, wet clutches, and hydraulic systems Applications l Suitable for a wide range of operating conditions l Transmissions and differential units with immersed wet brakes l Gearboxes with hydraulic brakes l Gearboxes with hydraulic drive systems

PACKS AVAILABLE 5L

CP1565

20L

CP1566

205L

CP1567

1000L

CP2103

Specifications SAE 10W-30, ISO 46-68, JDM J20C, JDQ 95 WEAR TEST

Key Advantages l Multi-viscosity formula for a wide range of operating temperatures l Prevents wear on high-torque heavy-loaded gears and bearings l Prevents wear and corrosion in hydraulic pumps l Provides proper friction for wet brakes and clutches, reducing slippage, wear and chatter l Prevents final drive wear due to anti-wear additives for gears

TORQ-GARD™ ENGINE OIL PACKS AVAILABLE ™

Torq-Gard is specially developed for four stroke diesel and petrol engines, where standard drain intervals are required. Applications l Suitable for latest or older generation engines l Also suitable for turbo or non-turbo engines l For use in diesel or petrol engines NOW WITH A HIGHER RATED SPEC!

CP8205

20L

CP8206

205L

CP8207

1000L

CP8208

Specifications SAE 15W-40, API CJ-4/CI-4 /CI-4 PLUS/SM, ACEA E9/E7

Key Advantages l Contains a high-performance additive system for cleaner pistons and reduced wear l Excellent low-temperature fluidity, providing instant lubrication and engine protection l Effective acid neutralising properties help to reduce corrosion ™ ™ l Acceptable to change from Torq-Gard to Plus-50 at any given oil or filter change

JOHN DEERE OILS THERMA-GARD™ COOLANT Therma-Gard™ is a high-performance anti-freeze/summer coolant designed to meet and exceed today’s heavy-duty engine requirements. Applications l Engineered for heavy-duty applications, where automotive grade products do not provide effective protection against corrosion l Developed specifically for John Deere engines l Formulated with corrosion inhibitors to minimise the formation of deposits

PACKS AVAILABLE 5L Pre-Mix

CP6175

10L Pre-Mix

CP6176

20L Pre-Mix

CP6177

205L Pre-Mix

CP6178

5L Concentrate

CP6179

Key Advantages 6 years/6,000-hour service life to reduce downtime and lower operating costs l 20% longer service intervals which translates to savings l High thermal and oxidative stability required by engines equipped with cooled exhaust gas recirculation (EGR) l Provides excellent protection against corrosion and deposits, extends water pump life and prevents cylinder liner cavitation l

GL-5 GEAR LUBRICANT PACKS AVAILABLE

GL-5 is the preferred oil in John Deere compartments when gear oils are recommended. API GL-5 is for service similar to GL-4, but for more severe conditions. It applies to conditions encountered in hypoid gears. Other equipment operated under high-speed, shock-load; high-speed, lowtorque; and low-speed, high-torque conditions may specify API GL-5.

CP1226

85W-140 20L

CP1228

80W-90 20L

Applications l Can be used in any application requiring API, GL-5; SAE 80, 90, 80W-90, or 85W-140 gear lubricants. Key Advantages Designed for gears, particularly hypoid which operate under conditions of high-speed, low-torque and lowspeed, high-torque

MULTI- PURPOSE GREASE - SD POLYUREA GREASE

John Deere’s range of greases has been specifically developed to protect, lubricate and improve the efficiency and productivity of a wide range of machinery. Industrial strength grease guns are designed to easily handle punishing day-in, day-out applications. Applications l Severe-duty , factory-fill grease l For high temperature and extreme pressure applications

PACKS AVAILABLE 379g CARTRIDGE

TY6341

2021 PRE-SEASON AFTERMARKET HARVESTER CATALOGUE

PARTS ONSITE™ PROGRAM

PARTS ONSITE™ CABINET: MAXIMUM UPTIME MAXIMISE YOUR UPTIME WITH A PARTS ONSITE™ CABINET No matter how close your Hutcheon & Pearce dealership is, your shed is a lot closer. That’s why John Deere offers Parts OnSite™ – so you can stock the parts you’re likely to need at your place and get back to work sooner. Your local Hutcheon & Pearce branch is the key to keeping you going. We’ll keep your cabinet stocked with the high-wear and maintenance parts you need for your business, and after you use a part, you reorder and restock. It’s that simple. Stay organised. Stay productive. Our sturdy Parts OnSite™ cabinets are the best way to l keep you organised, your parts secure and your shed looking good.

BENEFIT FROM:  Round the clock accessibility – parts are available at your place, when you need them, 24/7.

 JDParts.com – place orders through to us 24 hours a day, so you can stay on top of your inventory.

 On-farm visits – our qualified parts salespeople can make sure you have the right parts for your equipment and can make regular visits to come out and check your cabinet stock.

 Dealer support – we work with you to have the appropriate parts for your business always on-hand.

 More uptime – with your parts inventory close at hand, you can grab a part and get back to work in no time.

Let us make it easy for you to get your parts. Contact your local Hutcheon & Pearce branch to ask about Parts OnSite™ and how to access exclusive offers and promotions. Parts OnSite Cabinet Program Terms & Conditions •

First order minimum $3000 + GST

•

Maximum of $1500 of oil on first order

•

Cabinet remains an asset of Hutcheon & Pearce.

•

The customer is liable for any damage to the OnSite™ Cabinet & maybe charge accordingly.

>All prices shown in Australian Dollars including GST. Images are for illustrative purposes only. Current prices effective as of January 2021. Prices are subject to change after this period.

GOOD BETTER BEST

GOOD BETTER BEST AT HUTCHEON & PEARCE WE ARE COMMITTED TO PROVIDING THE RIGHT PART AT THE RIGHT PRICE. We have everything you need to keep your machinery in top form, from genuine John Deere oils, filters, belts and hoses, to remanufactured parts (REMAN) to the extensive A&I Products & Lankota range. Any machine. Any age. Any colour. We know you have a choice when it comes to John Deere equipment, so that’s why we offer you a choice when it comes to your parts. Our Good, Better, Best offering means that when it comes to repairs, there is a solution for any size and budget.

GENUINE JOHN DEERE PARTS

Engineered and tested for exact application, a genuine John Deere part is your best choice for performance and reliability.

FIND THE RIGHT PART FAST Here’s how to find the parts you need: - Scan the barcode below to go through to the John Deere Parts Catalog - Enter your serial number into the search field

- Next you’ll see a list of parts relevant to your machine

JOHN DEERE REMAN

When you need a quality solution at a price you can afford – remanufactured genuine John Deere Parts that are inspected, tested and backed by a John Deere warranty.

A&I PRODUCTS

SCAN HERE FOR YOUR COMBINE PARTS For more information, visit www.hutcheonandpearce.com.au/agricultural-parts

Quality non-OEM aftermarket parts at everyday low prices. Benefit from a wide selection of good quality, tested parts sourced from trusted manufacturers like A&I Products, Sunbelt and Lankota.

Order at any Hutcheon & Pearce store, by phone through your nearest dealer. 2021 PRE-SEASON AFTERMARKET HARVESTER CATALOGUE

BENEFIT FROM LANKOTA PRODUCTS PARTS AND ACCESSORIES NORMAL PRICE>

NUMBER

DESCRIPTION

LANH22104X

Kit of 6 left & 6 right galvanised steel cover plates mounted to wide spread tailboard spinner blades. Expect 3 to 4 times the life of just the poly spinner alone!

LANH21421112

Top Tailboard Fins Kit of 6 left & 6 right galvanised steel cover plates only. Poly is NOT included

PARTS DISCOUNTED BY 10% ON WORKSHOP INVOICE>~

COMBINE HALF - SINGLE HYDRAULIC BLOCK Hydraulic single point coupler block for the combine side of John Deere® combines. This is a Parker Hydraulics™ original, identical replacement part NUMBER

APPLICATION

TYPE

John Deere: LAN3PLK-05AFC

Hydraulic single point coupler block

Lankota

NORMAL PRICE>

PARTS DISCOUNTED BY 10% ON WORKSHOP INVOICE>~

COUPLER SEAL REPAIR KITS NUMBER LAN166987 LAN166988

APPLICATION

TYPE

Large 1/2” Coupler O Ring Kit Small 3/8” Coupler O Ring Kit

NORMAL PRICE>

Lankota Lankota

Contact your local Hutcheon & Pearce for the most up-to-date pricing

50 SERIES CONNECTIONS Dummy plug. Combine header recognition: NUMBER

APPLICATION Type

LANEC550 LANEC31JP LANEC31JDR LANEC31JF LANEC31JRC

Corn Head Pick Up Head Draper Head Flex Head Row Crop

Lankota Lankota Lankota Lankota Lankota

LANEC31JRDG

Rigid Head

Lankota

PARTS DISCOUNTED BY 10% ON WORKSHOP INVOICE>~

NORMAL PRICE>

PARTS DISCOUNTED BY 10% ON WORKSHOP INVOICE>~

BENEFIT FROM LANKOTA PRODUCTS SINGLE POINT CONNECTIONS Dummy plug & snap ring only combine header recognition. NUMBER

APPLICATION

TYPE

LANEC560

Corn Head

Lankota

LANEC31QP

Pick Up Head

Lankota

LANEC31QDR LANEC31QF

Draper Head Flex Head

Lankota Lankota

LANEC31QRC

Row Crop

Lankota

LANEC31QRDG

Rigid Head

Lankota

act Cont cal lo your & Pearce n o t he Hutc r the mos e fo o-dat up-t cing pri

PARTS DISCOUNTED BY 10% ON WORKSHOP INVOICE>~

NORMAL PRICE>

BENEFIT FROM A&I PRODUCTS

FRONT FEEDERHOUSE DRUM – POSIFEED ROLLERS Get the job done faster with posifeed rollers for John Deere • More aggressive feeding with its unique paddle design • More even feeding in light and heavy crops

NUMBER

APPLICATION

NORMAL PRICE>

TYPE

PARTS DISCOUNTED BY 10% ON WORKSHOP INVOICE>~

John Deere: A-AH142394-PF A-AH142393-PF A-AH218323-PF

9400, 9410, 9450, 9500, 9510, 9550, 9650, and 9750 9600, 9610, and 9650 9560 (SN 710392>), 9660, 9760, and 9860

A&I Products A&I Products A&I Products

CONCAVE SHOCK KIT • Prevents bent and bowed concaves and pipes • Absorbs the shock caused by foreign objects or large lumps of material being forced through the rotor • Adjustable tension on the turnbuckles allows up to one inch of movement on the concaves

NUMBER

APPLICATION

TYPE

NORMAL PRICE>

PARTS DISCOUNTED BY 10% ON WORKSHOP INVOICE>~

John Deere: A-CSKSTS

9650, 9660, 9670, 9750, 9760, 9770, 9860, A&I and 9870

2021 PRE-SEASON AFTERMARKET HARVESTER CATALOGUE

BENEFIT FROM A&I PRODUCTS LIGHTS NUMBER A-WL9000KT

A-WL8000KT

NORMAL PARTS DISCOUNTED BY 10% PRICE> ON WORKSHOP INVOICE>~

APPLICATION LED LIGHT KIT UPGRADE 6 LIGHTS- JD 9400,9410,9450,9500,9 510,9550,9560,9600,9610,9650, EARLY-9560,9560STS,9570ST S,9650STS9660STS,9670STS9750STS,9760STS LED LIGHT KIT UPDRADE 12 LIGHTS JD-8100,8100T,8110,811 0T,8200,8200T ,8210,8210T,8300,8300T,8400,8400T,8410,8410T

FEEDERHOUSE CHAIN NUMBER

DESCRIPTION APPLICATION

TYPE

John Deere A-AH207777

34 Slats

A&I

A-AH143399

51 Slats

9400, 9410, 9450, 9500, 9510, 9550, and 9560 9600, 9610, 9650, and 9660

NORMAL PRICE>

PARTS DISCOUNTED BY 10% ON WORKSHOP INVOICE>~

NORMAL PRICE>

PARTS DISCOUNTED BY 10% ON WORKSHOP INVOICE>~

A&I

RASP BARS NUMBER

DESCRIPTION

APPLICATION

TYPE

Hardened Rasp Bars Chrome Rasp Bars Hardened Rasp Bars Chrome Rasp Bars

9400, 9410, 9450, 9500, 9510, 9550, and 9560 9400, 9410, 9450, 9500, 9510, 9550, and 9560

A&I

9600, 9610, 9650, and 9660

A&I

9600, 9610, 9650, and 9660

A&I

John Deere A-V12068H A-V12068C A-V12072H A-V12072C

A&I

Contact your local Hutcheon & Pearce for the most up-to-date pricing

HIGH PERFORMANCE PACKAGE

KEEPING OUR FARMERS GOING THE ULTIMATE SERVICE PACKAGE

www.hutcheonandpearce.com.au/hp-package

Aussie farmers are the heroes that feed our nation. Even when times are tough. Your efforts keep us all going, but who keeps you going? We do. Our new High Performance Package is the ultimate service package to keep you moving. Locked-in pricing, 24/7 help, on-farm servicing. Less downtime. More support.

PEACE OF MIND

MONEY IN THE BANK

+ POWERGARD™ WARRANTY

REMOTE SUPPORT CONTACT YOUR LOCAL HUTCHEON & PEARCE BRANCH FOR MORE INFORMATION

2021 PRE-SEASON AFTERMARKET HARVESTER CATALOGUE

JOHN DEERE COMBINE EARLY ORDER PROGRAM

You will not buy better than a true factory forward order. Your Spec … Our Colour Order now for Harvest 2021 delivery and save $$! Custom build your new 2021 John Deere S700 Combine before the end of January for unbeatable prices! PLUS 3 years/1250 hours Limited Engine and Powertrain PowerGard Extended Warranty

CONTACT YOUR LOCAL HUTCHEON & PEARCE DEALER TO ORDER TODAY!

INSTANT ASSET WRITE-OFF

TAKE ADVANTAGE OF THE INSTANT ASSET WRITE-OFF! VISIT THE ATO WEBSITE FOR MORE INFORMATION OR CONTACT A REGISTERED TAX AGENT! ato.gov.au/instantassetwriteoff

>All prices shown in Australian Dollars including GST. Images are for illustrative purposes only. Current prices effective as of January 2021. Prices are subject to change after this period. ~Discount only applies if Inspections are completed by 31st March 2021 & repairs are committed to by 30th June 2021.

SHELBOURNE REYNOLDS STRIPPER FRONTS

STRIP THE GRAIN FROM THE PLANT, LEAVING THE STRAW STANDING. • Better soil moisture conservation • Better No-Till soil/seed contact • More evenly distributed residue for No-Till • An easier/faster harvest while saving fuel and combine wear and tear • 8 sided Stainless Steel fingered stripping rotor • Variable speed belt drive • Adapter plates to suit most combines • Available in sizes from 16’ to 42’

BENEFITS OF THE SHELBOURNE XCV STRIPPER RANGE - Increased efficiency: the stripper delivers predominately grain to the combine which improves productivity and decreases losses - Crop recovery: the stripper is able to lift lodged or hailed crop off the ground to then strip the grain leaving the majority of the straw behind - Fuel saving: the stripper uses less power as the combine is no longer processing the straw, which in turn, saves on fuel - Better quality grain: the stripper allows the combine threshing system to be run slower and is therefore less aggressive on the grain.

2021 PRE-SEASON AFTERMARKET HARVESTER CATALOGUE

ALBURY 222 Travelstop Way Albury NSW 2640 Phone: (02) 6058 6800

COWRA 64-68 Young Road Cowra NSW 2794 Phone: (02) 6341 4800

GRIFFITH Cnr Oakes Rd & Irving Place Griffith NSW 2680 Phone: (02) 6969 5300

WAGGA WAGGA 57 Moorong Street Wagga Wagga NSW 2650 Phone: (02) 6933 7900

COLEAMBALLY 7 Bencubbin Way Coleambally NSW 2707 Phone: (02) 6954 4280

DUBBO 22R Narromine Road Dubbo NSW 2830 Phone: (02) 6885 3300

LAKE CARGELLIGO 63 Canada Street, Lake Cargelligo NSW 2672 Phone: (02) 6898 1305

WARREN 11 Zora Street Warren NSW 2824 Phone: (02) 6847 3522

CONDOBOLIN 1a May Street, Condobolin NSW 2877 Phone: (02) 6891 2222

FINLEY 16 Riverina Highway Finley NSW 2713 Phone: (03) 5883 1655

ORANGE 26 Scott Place Orange NSW 2800 Phone: (02) 6362 9988

TECSight® Support Centre (02) 5924 5111

FORBES 56 Angus Clarke Drive Forbes NSW 2871 Phone: (02) 6862 1666

TEMORA 101 Kitchener Road Temora NSW 2666 Phone: (02) 6977 1100

TERMS & CONDITIONS: Disclaimer: Hutcheon & Pearce makes every effort to maintain the accuracy and quality of the information provided on this Catalogue. However, Hutcheon & Pearce cannot guarantee and assumes no legal liability or responsibility for the accuracy or completeness of the information provided. The information contained on this catalogue is for general guidance only. jMust be booked and completed in the same visit. Discount will apply to the lesser value service. kMust be booked and completed in the same visit. Discount will apply to the lesser value Expert Check. *Inspections must booked and committed to by February 28 2021. ^To qualify for 10% of all parts, 12 months part & associated labour warranty and HP Inspection Guarantee, all recommended repairs must be committed to within 30 days of receiving the repairs quote and completed within a mutually agreed time frame. vTo qualify for over the counter parts discount, orders must be over $3,500 & placed in one transaction, inspections must be committed to by February 28 2021. Parts order must be placed before 30th of June 2021. All orders placed after this date will revert to normal retail pricing. >All prices shown in Australian Dollars including GST. Images are for illustrative purposes only. Current prices effective as of January 2021. Prices are subject to change after this period. 1- Inspections must booked and committed to by February 28 2021. Repairs must be committed to within 30 days of receiving the repairs quote and completed within a mutually agreed time frame. Parts and labour for recommended repairs not included. Customers must have an up-to-date and current account. All recommended service repairs are completed using your choice of genuine John Deere or A&I aftermarket parts. Travel for on-site Export Check is included in price (up to 150kms from nearest Hutcheon & Pearce location). The $600 Expert Check fee must be paid in full with normal payment terms. 2- Oils, coolant, filters and parts are not included. Travel charges apply for on-site servicing. No additional work will be done without your authorisation. Additional mechanical repairs outside of warranty will be charged at normal retail rates. tPrice is optimisation only. Additional repairs are not included. If repair work is required or found at time of optimisation, the local service department will be advised. Image for illustrative purposes only. Price current Jan 2021 – Jun 2021. Price subject to change after this period. ~Discount only applies if Inspections are committed to by February 28 2021 and repair quote accepted within 30 days of receiving

BEHIND YOU ALL SEASON LONG www.hutcheonandpearce.com.au