115

Page 1

BUILDERS GUIDE

CERTIFICATE No. 05/0028

January 2012


Introduction QUINN-therm (PIR INSULATION) QUINN-therm Ltd specialises in the manufacture and distribution of zero ODP Polyisocyanurate (PIR) insulation to the UK and Irish markets. QUINN-therm Ltd is located in Co. Cavan, Ireland and is a division of a company that manufactures various construction products including expanded polystyrene insulation, cement, aerated thermal blocks, prestressed concrete products and rooftiles. Due to continual investment and the ethos of QUINN-therm Ltd, the company is able to provide product flexibility, energy saving products and technically innovative solutions while maintaining the highest quality standard at all times. All QUINN-therm Ltd products are manufactured to exceed the performance criteria as required by the current building regulations. Products are put through a rigorous testing regime, carried out with the assistance of the latest technology in our in house laboratory. All products are manufactured to meet and exceed the demands of the following standard IS ISO9001:2008. Additionally our products have BBA and IAB accreditation, confirming QUINN-therm's undoubted commitment to quality and to its customers.

THICKNESS (mm) THERMAL RESISTANCE R-VALUE

We are also proud to be an environmentally committed company both in production and in raw material consumption. QUINN-therm understands the need to meet the economic aspect of heat conservation and the ever increasing trend towards low energy buildings and in regards to this manufactures products with low thermal values. Additionally thanks to our experienced technical department, we are able to personally advise all our customers on the most effective way to meet the current Building Regulations in the ever changing marketplace.

25

30

35

40

50

60

70

75

80

90

100

125

150

1.14

1.36

1.59

1.82

2.27

2.73

3.18

3.41

3.64

4.09

4.55

5.68

6.82


QUINN-therm Partial fill cavity walls

PRODUCT DATA

PERFORMANCE DATA

Properties

Value

QUINN-therm QW

Board width x length

mm

450 x 1200

Board thickness

mm

25 - 120

Board density

kg/m3

26 - 32

Area per board

m2

0.54

Properties

Value

QUINN-therm QW

Thermal Conductivity

W/mk

0.022

Water Vapour resistivity

MNs/gm

- 400

Compressive Strength

kPa

>120


QUINN-therm Insulating floors

PRODUCT DATA

Properties

Value

QUINN-therm QF

Board width x length

mm

2400 x 1200

Board thickness

mm

20 - 150

Board density

kg/m3

26 - 32

Area per board

m2

2.88

Edge profiles available

PERFORMANCE DATA

Butt edged

Properties

Value

QUINN-therm QF

Thermal Conductivity

W/mk

0.022

Water Vapour resistivity

MNs/gm

-400

Compressive Strength

kPa

>120


QUINN-therm Insulating pitched roofs

PRODUCT DATA

Properties

Value

QUINN-therm QR

Board width x length

mm

2400 x 1200

Board thickness

mm

20 - 150

Board density

kg/m3

26 - 32

Area per board

m2

2.88

Edge profiles available

PERFORMANCE DATA

Properties

Butt edged

Value

QUINN-therm QR

Thermal Conductivity

W/mk

0.022

Water Vapour resistivity

MNs/gm

-400

Compressive Strength

kPa

>120

Other Quinn products include: Cement, Concrete Rooftiles, Aerated Thermal Blocks, Lite Pac, Prestressed, Quarry and Tarmac


uinnTherm July17 PF

26/7/07

12:42

Page 9

QUINN-therm

QUINN THERM

9

Quinn Therm

Internal insulation of masonry walls with plasterboard laminate

Internal insulation of masonry walls with plasterboard laminate DESIGN NOTES

external solid wall 50mm x 25mm timber battens existing plaster finish

plaster skim

* •insulation thickness - fixed add to 9.5mm or 12.5mm for Quinn Therm QL shown plasterboard battens using specified plasterboard ** quoted in accordance with fixings. On uneven walls battensBS EN 13165:2001 'Thermal forout. Buildings - factory made may haveinsulation to be packed polyurethance foam products'. • Quinn Therm QL can also be *** some sizes 2438 x 1200 - please confirm size with installed on dabs of drywall stockist before order adhesive with secondary mechanical fixings. • Quinn Therm QL boards supplied in 2.4m lengths to match storey height and minimise cutting.

floor finish

• a VCL may be required in some constructions: contact Quinn Technical Services for advice. INTRODUCTION Quinn Therm QL (Quinn Laminate) is a PIR (polyisocyanurate) insulation and plasterboard laminate for improving the thermal performance of walls in new build and refurbishment projects by internal lining. Quinn Therm QL insulation boards

floor construction

PRODUCT DATA

Properties Board width x length*** Board thickness* • is light, robust and easy to handle; it may be worked using a saw or sharp knife; Board • is durable and will perform for the service life of density the building. Area per board Plasterboard Edge profile MEETING REGULATIONS KEY PROPERTIES

Quinn Therm: • does not readily absorb water, making it suitable for use in damp environments;

PERFORMANCE U-value (W/m2K) DATA

Properties Thickness of Quinn Therm QL* (mm) Thermal Conductivity** 40 40 Water Vapour resistivity25 40 45 25 50 55Strength 35 Compressive

Required thicknesses of Quinn Therm QL for different wall constructions

0.37 0.35 0.30 0.27 0.25

35 40 50 60 65

60 65

60 70

40 50

Quinn Therm consists of a core of PIR foam bonded on both faces to composite aluminium facings; the gas filled cells give Quinn Therm its high thermal performance and strength.

Unit Value Adding an insulation to the inner face mm of a masonry wall is a straightforward 1200x2400 cost-effective way of improving mm and 17-80 the thermal performance. Using an 3 laminate 26 - 32 kg/minsulation/plasterboard makes the process more efficient by m2 allowing the insulation and 2.88 surface finish to be installed in one Taper operation.Edge Because the addition of insulation and

the Unit new surface finish will affectValue usable space in the room it is vital to W/mk 0.022 specify high performance insulation. Quinn Therm, which is incorporated MNs/gm -400in Quinn Therm QL boards offers a high kPa thermal resistance, minimising >120 the volume lost in the upgrade.

For215mm further500mm information: 215mm 215mm Brick Natural stone Dense block Quinn Lite (B5) QUINN-therm, Scotchtown, Ballyconnell, Co. Cavan, Ireland. * Thickness of insulation only: allow 12.5mm for thickness of plasterboard. Tel: 0845 602 6870 (UK) Fax: 0845 602 7880 (UK) Results based upon wall construction of: masonry (see table), 15mm plaster, Quinn Therm QL, cavity, 12.5mm plasterboard. Tel: +353 4925mm9525600 (Ireland) Fax: +353 49 9525601 (Ireland) Calculations performed to BS EN ISO 6946:1997, taking account of repeating thermal bridges. info@quinn-therm.comwww.quinn-therm.com Masonry

While every care has been taken to ensure the accuracy of the information in this brochure, Quinn Therm can accept no responsibility for any errors which may occur.


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.