HARDIEBACKER® SCORE-AND-SNAP-KNIFE
Designed with contractors and home owners in mind this simple yet effective hand tool is perfect for accurate straight cuts on all James Hardie® cement boards up to 12mm thick. It’s thick, sturdy handle, and a long-lasting blade with tungsten carbide tips produces a V-cut so that upward pressure on the board allows you to easily snap it along the cut
HARDIEBLADE® CIRCULAR SAW
Specially designed to reduce dust levels, the diamond tipped teeth increase blade life and ensure a clean cut every time. Using continuous disk or wood blades causes excessive levels of dust, very fast blade wear, and is not recommended. HardieBlade® circular saw blade is available in 160mm, 190mm, 254mm and 305mm diameters, to fit most mains electric and battery powered circular saws.
A range of purpose-made fixings for James Hardie® siding products and backerboards. James Hardie® screws for HardieBacker® cement board Self countersinking, they cut a shaped hole in the fibre cement board, so that as the screw is tightened, the head finishes flush with the surface of the board. For wood frames : 5.0 x 32 mm, diameter head 10 mm. P2. For metal frames : 4.8 x 30 mm, diameter head 10 mm. P2. Stainless steel A2 austenitic screws for HardiePanel® siding With coloured heads matched to the ColorPlus® Technology range. No pre-drilling is required. For wood frames : 4.8 x 38 mm, diameter head 12 mm. Torx 20.