www.marshalls.co.uk/kerb Sales Office: 0845 3020600 Technical Support: 08704 113344 Manufacturing Standards: see page 19
KERB07
Q10 10 Q10 110
Paving. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 22 Block Paving. . . . . . . . . . . . . . . . . . . . . . page 76 Machine Lay.. . . . . . . . . . . . . . . . . . . . page 114 Water Management.. . . . . . . . . page 136
Kerb, Channel & Edging. . . . page 212 Traffic Management.. . . . . . . . . page 250 Walling & Masonry.. . . . . . . . . . . page 342
Standard Kerb, Channel and Edging BS Standard Concrete Kerb, Channel and Edging
n M arshalls uses hydraulic pressing in the manufacture of standard natural kerb*, channel and edging. n P rovides consistent long-term performance as expected from Marshalls with a functional unit of this type. n A ll units are manufactured in accordance with BS EN 1340:2003 Concrete kerb units – requirements and test methods, together with a range of non-standard sizes manufactured to the same specification offering greater flexibility in design. n All straight units are 914mm unless otherwise stated. n M arshalls recommends the use of appropriate handling equipment in the installation of these products, and that installers work in accordance with current health and safety legislation. For further information contact Marshalls Technical Support on 0870 113344. *Some radius unit are manufactured in a wet cast production method.
British Standard Products For easy identification, BS EN 1340:2003 sections are tinted thus Weights The approximate number of units per tonne is indicated in each section thus 20 = 20 units per tonne.
‚ Saxon Paving, Priora and Standard Kerb, The Green Building, Thorpe Park, Leeds
239
Half Battered STRAIGHT
150 x 305 HB1 Ref No. RK0100000
125 x 255 HB2 Ref No. RK0300000 (also available in 600mm lengths)
125 x 150 HB3 Ref No. RK0500000
(97kg) 10
(69kg) 14
(42kg) 24
RADIUS Convex (external)
Concave (internal)
Formula
half battered radius kerb Note: Âź circles can be constructed without cutting from units with a face length of 780mm. Units listed below are 780mm face length unless otherwise stated. For radii greater than 12m straights should be utilised. Type Size Profile
Radius 0.6 1 2 3 4 5 6 8 10 12 No. per 1 2 4 6 8 10 12 16 20 24 1/4 Circle*
External Rad
150 x 305
HB1
125 x 255
HB2
RK0305060 RK0305100 RK0305200 RK0305300 RK0305400 RK0305500 RK0305600 RK0305800 RK0306000 RK0306200 62.0
125 x 150
HB3
Internal Rad
125 x 255
HB2
External Rad
125 x 255/150 HB to BN (LH)
RK4307400
RK4307600 RK4307800
52.5
Drop Kerb
125 x 255/150 HB to BN (RH)
RK4305400
RK4305600 RK4305800
52.5
XXXXXXXXX
= 950 face length
XXXXXXXXX
Half Battered Radius Kerb available ex-stock. *Except droppers.
240
RK0105200 RK0105300 RK0105400
RK0307100
914mm face length
RK0105600 RK0105800 RK0106000
Weight kg (approx)
RK0505300 RK0505400 RK0505500 RK0505600 RK0505800 RK0506000
84.9
34
RK0307300 RK0307400 RK0307500 RK0307600 RK0307800 RK0308000 RK0308200 62.0
XXXXXXXXX
BS EN 1340
DROP KERBS 1:12 Gradient
1:9 Gradient
125 x 255/178 Left hand Ref No. RK4330010 125 x 255/178 Right hand Ref No. RK4330020
125 x 178 Centre Ref No. RK4340000
125 x 255/150 Left hand DL1 Ref No. RK4300010 125 x 255/150 Right hand DR1 Ref No. RK4300020
(59kg) 17
(49kg) 20
(59kg) 17
TRANSITIONS
SIDE OFFLET
125 x 255 HB to BN Left hand Ref No. RK5050010 125 x 255 BN to HB Right hand Ref No. RK5050020
125 x 255 HB to 45ยบ SP Left hand TL Ref No. RK5070010 125 x 255 45ยบ SP to HB Right hand TR Ref No. RK5070020
For use with 125 x 255 HB Ref No. RK5300000
(69kg) 14
(69kg) 14
(62kg) 16
DOUBLE DROP KERB 1:24 Gradient
125 x 255/215 HB Left hand Ref No. RK4320010 125 x 255/215 HB Right hand Ref No. RK4320020 125 x 215/178 Left hand Ref No. RK4320030 125 x 215/178 Right hand Ref No. RK4320040
(54kg) 19
(63kg) 16
ANGLES
QUADRANTS
External 125 x 255 HBXA Ref No. RK5100000
Internal 125 x 255 HBIA Ref No. RK5100100
305 x 255 QHB Ref No. RK4720000
455 x 255 QHB Ref No. RK4710000
(36kg) 28
(36kg) 28
(43kg) 23
(99kg) 10
241
Bullnosed STRAIGHT
150 x 305 BN Ref No. RK0150000
125 x 255 BN Ref No. RK0350000 Also available in 600mm length
125 x 150 BN Ref No. RK0550000
(100kg) 10
(70kg) 14
(42kg) 24
RADIUS Convex (external)
Formula
Concave (internal)
Note: Âź circles can be constructed without cutting from units with a face length of 780mm. Units listed below are 780mm face length unless otherwise stated. For radii greater than 12m straights should be utilised. Description Size Profile
RK0155200 RK0155400 RK0155400
Ext Rad Kerb
150 x 305
BN
125 x 255
BN
125 x 150
BN
Int Rad Kerb
125 x 255
BN
125 x 150
BN
XXXXXXXXX
BS EN 1340
Bullnosed Kerb available ex-stock. *Except droppers.
242
Radius 0.6 1 2 3 4 5 6 8 10 12 No. per 1 2 4 6 8 10 12 16 20 24 1/4 Circle* RK0155600 RK0155800 RK0156000
Weight kg approx 87.2
RK0355100 RK0355200 RK0355300 RK0355400 RK0355500 RK0355600 RK0355800 RK0356000 RK0356200 64.0 RK0555200 RK0555300 RK0555400 RK0555500 RK0555600 RK0555800 RK0556000 RK0357600
35.5
RK0358000 RK0358200 64.0
RK0557300 RK0557400 RK0557500 RK0557600 RK0557800 RK0558000
53.0
DROP KERBS 125 x 255/150 Left hand Ref No. RK4350010 125 x 255/150 Right hand Ref No. RK4350020
125 x 150 Centre Ref No. RK0550000
(59kg) 17
(42kg) 24
TRANSITION 125 x 255 HB to BN Left hand Ref No. RK4300010 125 x 255 BN to HB Right hand Ref No. RK4300020
(69kg) 14
ANGLES
QUADRANTS
Convex (external) 125 x 255 BNXA Ref No. RK5150000
Concave (internal) 125 x 255 BNIA Ref No. RK5150100
305 x 255 QBN Ref No. RK4820000
455 x 255 QBN Ref No. RK4810000
(37kg) 27
(37kg) 27
(45kg) 22
(99kg) 10
243
45째 Splayed STRAIGHT
125 x 255 SP Ref No. RK0400000 Also available in 600mm length
125 x 150 SP Ref No. RK0600000
(64kg) 16
(36kg) 24
RADIUS
Radius (mm)
1
2
3
4
5
6
8
10
12
125 x 255 SP Convex (external)
No. per metre*
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.09
No. per 1/4 circle
2
4
6
8
10
12
16
20
21
Weight (kg) approx
53
53
53
53
53
53
53
53
62.5
Reference No.
RK0405100
RK0405200
RK0405300
RK0405400
RK0405500
RK0405600
RK0405800
RK0406000
RK0406200
*Assumes inclusion of trowel width joint. 45째 Splayed Kerb available ex-stock.
DROP KERB 125 x 255/150 Left hand DL2 Ref No. RK4400010 125 x 255/150 Right hand DR2 Ref No. RK4400020
125 x 150 Centre Ref No. RK0550000
(52kg) 19
(42kg) 24
TRANSITION
SIDE OFFLET o
244
125 x 255 Left hand (HB to 45 SP) TL Ref No. RK5070510 o 125 x 255 Right hand (45 SP to HB) TR Ref No. RK5070520
For use with 125 x 255 SP Ref No. RK5320000
(69kg) 14
(62kg) 16
45째 Splayed QUADRANTS
455 x 255 QSP Ref No. RK4910000
305 x 255 QSP Ref No. RK4920000
(101kg) 24
(41kg) 10
External 125 x 255 SPXA Ref No. RK5200000
Internal 125 x 255 SPIA Ref No. RK5200100
(36kg) 28
(36kg) 28
ANGLES
245