Tubeclamps Limited Cradley Business Park Overend Road Cradley Heath West Midlands B64 7DW Tel: +44 (0)1384 565241 Fax: +44 (0)1384 410490 Email: sales@tubeclamps.co.uk Web: www.tubeclamps.co.uk
TECHNICAL MANUAL
Š2011 - Tubeclamps Ltd. All rights reserved.
FITTINGS SPECIFICATION are Hot Dip Galvanised (to BS EN ISO 1461) Malleable Iron fittings which are supplied with proprietary corrosion resistant setscrews that are case hardened to securely fix tubes in position. EASY TO USE fittings are manufactured with simplicity and ease of use very much in mind. No special skills are required no welding, no bending, no threading just a hexagonal key to tighten the set screws and you can join tubing together in a matter of seconds. The comprehensive range of fittings and sizes means that fittings can be used in a wide variety of applications, either temporary or permanent.
CONTENTS 2.
Fitting Specification & Tube Sizes
4.
Fittings 101 -124
5.
Fittings 125 -130
6.
Fittings 131 -136
7.
Fittings 138 -144
8.
Fittings 145 -150
9.
Fittings 152 -158
10.
Fittings 160 -167
11.
Fittings 168 -171
12.
Fittings 173 -182
13.
Fittings 184 - 233
14.
DDA Handrailing for the Disabled
15.
DDA Handrailing for the Disabled
16.
DDA Installation Instructions
17.
Upright Construction for Inline Guardrail
18.
How to Calculate Correct Tube Length
19.
Base and Wall Plates, Weather Flange, Gate
TUBE SIZES TUBE DIA. Ø MM
26.9mm 33.7mm 42.4mm 48.3mm 60.3mm 2
NOTE: The blue tubes shown in the brochure are for visual effect only, standard tubes are
The main cover photograph and the one above are of Guernsey harbour supplied by stockist, Bougard and Harry Limited, Vale Avenue, Vale, Guernsey.
authorised
galvanised.
Whilst every effort has been made to ensure the accuracy of the information contained in this brochure, Tubeclamps Limited cannot be held responsible for any errors or omissions. Tubeclamps Limited reserves the right to alter or withdraw products without prior notice. Tubeclamps Limited accepts no responsibilty for any loss or damage arising from improper use of it’s products. No part of this brochure may be reproduced in any form without prior permission in writing from Tubeclamps Limited. ©2011 - Tubeclamps Ltd. All rights reserved.
www.tubeclamps.co.uk ©2011 - Tubeclamps Ltd. All rights reserved
3
101 : SHORT TEE
type
tube size
a
101A 101B 101C 101D 101E
26.9 33.7 42.4 48.3 60.3
40 48 60 67 86
b
c
d
e
Ø
Kg
125 : 2 WAY ELBOW
0.19 0.32 0.44 0.52 0.78
a
a
Typicallyusedonstraightandlevelguardrailtoconnecttheuprighttothetoprailortheendormidrailto theupright.Tubescannotbejoinedinsidea101;tojointubesinsidethefittingusea104.Normallyused in conjunction with the 119 fitting when building two rail guardrail.
A101 : ADD ON SHORT TEE
type
tube size
a
b
A101C A101D
42.4 48.3
60 68
55 60
c
d
e
Ø
Kg 0.60 0.71
126 : ANGLE CROSS UP TO 45° a
type
tube size
a
b
104A 104B 104C 104D 104E
26.9 33.7 42.4 48.3 60.3
40 48 60 67 86
80 96 122 134 172
c
d
e
Ø
Kg 0.35 0.60 0.75 0.91 1.47
127 : ANGLE TEE UP TO 45° a
Typicallyusedonstraightandlevelguardrailtoconnecttheuprighttothetoprail.Tubescanbejoined insidea104fitting.Normallyusedinconjunctionwiththe119fittingwhenbuildingtworailguardrail.
116 : 3 WAY THROUGH
type
tube size
a
116A 116B 116C 116D 116E
26.9 33.7 42.4 48.3 60.3
40 48 60 67 86
b
c
d
e
Ø
Kg
128 : 3 WAY 90° ELBOW a
a
Typically used on straight and level guardrail to connect the mid rails to the upright at a 90° corner. Normally used in conjunction with the 128 fitting when building two rail guardrail.
119 : 2 SOCKET CROSS
type
tube size
a
b
119A 119B 119C 119D 119E
26.9 33.7 42.4 48.3 60.3
40 48 60 67 86
80 95 120 134 172
c
d
e
Ø
Kg 0.36 0.43 0.62 0.71 1.50
129 : ADJUSTABLE TEE a
60°
Typically used on straight and level guardrail to connect the mid rails to the upright.The upright must remaincontinuouswiththecrossrailsbeingcut.Normallyusedinconjunctionwiththe104fittingwhen building a two rail guardrail.
124 : VARIABLE ELBOW
type
tube size
a
b
c
d
124B 124C 124D
33.7 42.4 48.3
65 80 95
60 66 75
13 16 17
50 55 55
e
Ø
Kg
130 : ADJUSTABLE CROSS
0.41 0.68 0.89
a
30/45 °
www.tubeclamps.co.uk sales@tubeclamps.co.uk ©2010 - Tubeclamps Ltd. All rights reserved ©2011
125A 125B 125C 125D 125E
26.9 33.7 42.4 48.3 60.3
40 48 60 67 86
22 25 33 36 47
c
d
e
Ø
Kg 0.28 0.39 0.55 0.65 1.06
type
tube size
a
126B 126C 126D
33.7 42.4 48.3
162 190 218
b
c
d
e
Ø
Kg 0.87 1.20 1.51
type
tube size
a
127B 127C 127D
33.7 42.4 48.3
162 190 218
b
c
d
e
Ø
Kg 0.91 1.31 1.63
type
tube size
a
128A 128B 128C 128D 128E
26.9 33.7 42.4 48.3 60.3
40 48 60 67 84
b
c
d
e
Ø
Kg 0.37 0.53 0.80 1.05 1.82
Typically used on straight and level guardrail to connect the two top rails to the upright at a 90° corner post. Normally used in conjunction with the 116 fitting when building two rail guardrail.
type
tube size
a
129B 129C 129D
33.7 42.4 48.3
74 85 102
b
c
d
e
Ø
Kg 0.58 0.87 0.90
Typically used on steeper slopes or stairs as a tee connector with an angle between 30° & 60° with the uprightremainingvertical.Tubecannotbejoinedwithinthefitting.Normallyusedinconjunctionwiththe 130 fitting.
30°
Variableelbowforconnectingtwotubestogetheratanglesbetween15°&60°onguardrailsorhandrails. This fitting avoids the need to bend tube.
4
b
Typicallyusedonguardrailforconnectingthetoprailtotheupright.Normallyusedinconjunctionwith the 126 fitting. Fittings stocked as blanks, machined to order to the angle specified between 0° and 45°.
0/45 °
0.26 0.43 0.58 0.69 1.70
a
Typicallyusedonguardrailforconnectingthemidorlowerrailstotheupright.Theuprightmustremain continuous with the cross rails being cut. Normally used in conjunction with the 127 fitting. FITTINGS STOCKED AS BLANKS, MACHINED TO ORDER TO THE ANGLE SPECIFIED BETWEEN 0° AND 45°.
0/45 °
104 : LONG TEE
tube size
Typically used on straight and level guardrail to connect the top rail to the upright. Normally used in conjunctionwiththe101fittingwhenbuildinganendpostonatworaillguardrail.Thisfittingcanalsobe used to create a 90° bend.
b b
TheAddOnShortTeeallowsexisitingstructurestobeextendedwithouttheneedforanydismantling. The tube must not be joined within this fitting.
type
type
tube size
a
130B 130C 130D
33.7 42.4 48.3
162 190 218
b
c
d
e
Ø
Kg 0.82 1.17 1.50
Typicallyusedonsteeperslopesorstairsasanintermediatecrossconnectorwithananglebetween30°& 45°withtheuprightremainingvertical.Normallyusedinconjunctionwiththe129fittingwhenbuilding two rail guardrail. The 130 fitting is not recommended for use as the top fitting on guardrail.
www.tubeclamps.co.uk ©2010 - Tubeclamps Ltd. All rights reserved ©2011
5
131 : WALL FLANGE b
c a
d
132 : RAILING BASE FLANGE e b
d c
a
type
tube size
a
b
c
d
Ø
Kg
131A 131B 131C 131D 131E
26.9 33.7 42.4 48.3 60.3
86 89 102 114 127
42 45 50 57 64
57 64 76 89 95
4 6 6 6 6
8 9 9 9 9
0.32 0.40 0.50 0.65 1.10
138 : GATE EYE a
b
c
tube size
a
b
c
d
e
Ø
Kg
132A 132B 132C 132D 132E
26.9 33.7 42.4 48.3 60.3
114 128 140 152 165
76 89 89 89 128
76 89 102 114 127
65 76 80 89 88
8 9 10 10 9
11 14 14 14 18
0.65 0.96 1.07 1.24 1.80
140 : GATE HINGE
c a
d
type
tube size
133A 133B 133C 133D 133E
26.9 33.7 42.4 48.3 60.3
a
b
c
d
e
141 : RAILING HORIZONTAL SIDE SUPPORT Ø
a
b
c
138A 138B 138C 138D
26.9 33.7 42.4 48.3
30 33 38 41
25 25 25 25
15 15 15 15
d
e
Ø
Kg 0.21 0.23 0.25 0.29
type
tube size
a
b
c
d
140A 140B 140C 140D
26.9 33.7 42.4 48.3
30 33 38 41
25 25 25 25
13 13 13 13
38 38 38 38
e
Ø
Kg 0.24 0.27 0.30 0.33
Male section of a two-part gate hinge, used in conjunction with the 138 fitting. For heavy duty or wide gates use a 147, 101 & 179 to construct the gate hinge, for details see drawing on page 19.
b
Astructuralbaseplateforallapplicationsusingverticalposts.Forguardrailthefittingshouldbepositioned with the base holes at 90° to the line of the rail to give maximum strength.
133 : PLASTIC END CAP
tube size
Femalesectionofatwo-partgatehinge,usedinconjunctionwiththe140fitting.Forheavydutyorwide gates use a 147, 101 & 179 to construct the gate hinge, for details see drawing on page 19.
This fitting can be used for terminating cross rails to walls etc., it can also be used as a base plate for non-load bearing structures such as chairs, benches, tables etc.THIS FITTING IS NOTTO BE USED AS A BASE PLATE FOR GUARDRAIL OR IN LOAD BEARING APPLICATIONS.
type
type
Kg 0.008 0.010 0.010 0.016 0.024
b
c
a
type
tube size
a
b
c
141B 141C 141D
33.7 42.4 48.3
90 90 90
30 35 41
12 12 15
d
e
Ø
Kg
18 18 18
0.92 1.41 1.53
TheRailingHorizontalSideSupportisdesignedtoprovideabaseforrailingsandotherstructuresthatneed asidemountedflushfixingplate.Whenusedasasecondaryinlinefixingthebaseneedstobereamedout to allow the tube to pass through.
A plastic end cap to seal the open end of tubes.This fitting is a frictional fit only. For a permanent fix, a suitable adhesive should be used. For a metal alternative use the 136.
134 : GROUND SOCKET b d c
type
tube size
a
b
c
d
134B 134C 134D
33.7 42.4 48.3
60 60 60
140 140 140
130 130 130
4.5 4.5 4.5
e
Ø
Kg
142 : BASE FLANGE & INTEGRATED TOEBOARD a
1.42 1.42 1.42
Typically used as a base plate for a removable upright that can be removed without leaving any obstructions.Thetubeisheldinplacebythesetscrew.Thecastingholeshouldbeaminimum300mmx 300mm x 300mm.
d
b
135 : CLAMP ON TEE
a
type
tube size
a
135A 135B 135C 135D 135E
26.9 33.7 42.4 48.3 60.3
50 53 67 77 90
b
c
d
e
Ø
c
Kg
d
0.35 0.45 0.65 0.70 1.20
a e
b
c
144 : RAILING SIDE SUPPORT (VERTICAL) type
tube size
136A 136B 136C 136D 136E
26.9 33.7 42.4 48.3 60.3
a
b
c
d
e
Ø
Kg 0.05 0.10 0.12 0.17 0.29
a
b
c
d
e
Ø
Kg
42.4 48.3
45 45
90 90
58 58
30 30
100 100
18 18
2.00 2.12
e
Typicallyusedforaddingtoanexistinginlinestructurewithouthavingtodismantletheoriginalstructure. MAXIMUM Bolt torque 15N/m. Uses a M10 stainles steel bolt.
136 : METAL DRIVE IN PLUG
tube size
142C 142D
TheBaseFlangewithIntegratedToeboardisidealforguardrailingandbalustradingapplicationswhere theadditionofatoeboardorkickplateisrequired.Theslottedholesinthebackplateallowforsideways movements to ease installation.
143 : HANDRAIL BRACKET
a
type
d a
e
c
b
type
tube size
a
b
c
d
e
Ø
Kg
143A 143B 143C 143D
26.9 33.7 42.4 48.3
55 57 63 67
44 44 44 48
78 82 102 108
57 63 76 85
6 6 8 8
9 11 11 11
0.45 0.49 0.60 0.63
Typically used for wall mounted handrailing, this fitting can also be used to hold in place kick plate on guardrail, or even display boards at exhibitions. THIS FITTING IS NOT TO BE USED AS A solitary BASE PLATE FOR GUARDRAIL OR SIMILAR LOAD BEARING APPLICATIONS.
type
tube size
a
b
c
d
e
Ø
Kg
144B 144C 144D
33.7 42.4 48.3
104 114 120
96 109 123
67 72 86
65 65 65
45 50 60
14 14 14
0.91 1.20 1.50
Typically used as an offset structural side palm fixing for either straight or sloping guardrail.The tube is unabletopassthroughthestandardfitting,shouldthisberequiredthenthebasemustbereamedout. Use in conjunction with a 143 when a secondary inline base fixing is required.
A metal drive in plug that is difficult to remove. Please note this plug can only be used with 3.2mm wall thick tube. For a Plastic alternative use a 133.
6
sales@tubeclamps.co.uk ©2011 - Tubeclamps Ltd. All rights reserved
www.tubeclamps.co.uk ©2011 - Tubeclamps Ltd. All rights reserved
7
145 : OFFSET RAILING SIDE SUPPORT (HORIZONTAL) d
type
tube size
a
b
c
d
145B
33.7
104
98
62
65
44
Ø
Kg
14
0.95
Typicallyusedasanoffsetnon-structuralsidepalmfixingforeitherstraightorslopingguardrail.Thetube isunabletopassthroughthestandardfitting,shouldthisberequiredthenthebasemustbereamedout. Use in conjunction with a 143 when a secondary inline base fixing is required.
a
b d
e a
d
b c
tube size
a
b
c
d
e
Ø
Kg
152C 152D
42.4 48.3
91 96
140 152
79 80
102 114
10 10
14 14
0.90 1.40
c e
b
146 : SIDE PALM FIXING
type
Typicallyusedasastructuralbaseforslopingguardrailbetween0°and11°enablingtheuprighttoremain vertical.
a
e c
152 : BASE FLANGE 0° - 11°
type
tube size
a
b
c
d
e
Ø
Kg
146B 146C 146D
33.7 42.4 48.3
76 84 92
89 98 104
71 82 86
63 72 78
97 108 112
11 11 11
0.65 0.82 0.88
0°-11°
153 : SHORT TEE 0° - 11° 0°-11°
type
tube size
a
153C 153D
42.4 48.3
60 68
b
c
d
e
Ø
Kg 0.62 0.76
Typicallyusedonshallowslopingguardrailbetween0°and11°toconnecttheuprighttothetoprailorthe endormidrailtotheupright.Tubescannotbejoinedinsidethisfitting,tojointubesusethe155.Normally used in conjunction with the 154 fitting.
Typicallyusedasastructuralsidepalmfixingfortheuprightoneitherstraightorslopingguardrailkeepingthe uprightascloseaspossibletotheslopeorstairs.Whenusedasasecondaryinlinefixingthebaseneedstobe machined to allow the tube to pass through and the bottom fixing hole then becomes redundant. Base thickness 7mm
a
147 : INTERNAL SWIVEL TEE
b a
type
tube size
a
b
c
147B 147C 147D
33.7 42.4 48.3
23 29 31
33 42 48
34 40 44
d
e
Ø
Kg 0.39 0.58 0.66
154 : ELBOW 0° - 11° a
0°-11 °
c
148 : SHORT SWIVEL TEE a
type
tube size
a
148A 148B 148C 148D 148E
26.9 33.7 42.4 48.3 60.3
65 66 73 81 110
b
c
d
e
a
type
tube size
a
Kg 0.31 0.32 0.54 0.49 1.14
149A 149B 149C 149D 149E
26.9 33.7 42.4 48.3 60.3
76 89 102 100 120
b
c
d
e
a
154C 154D
42.4 48.3
60 67
b
c
d
e
Ø
Kg 0.87 1.02
0°-11°
Ø
155 : LONG TEE 0° - 11° b
Ø
Kg
type
tube size
a
b
155C 155D
42.4 48.3
60 67
144 158
c
d
e
Ø
Kg 1.02 1.10
Typically used on shallow sloping guardrail between 0° and 11° to connect the upright to the top rail. Tubes can be joined inside this fitting. Normally used in conjunction with the 156 fitting.
0°-11 ° a
Typically used on level guardrail to create a corner at other than 90° with an upright. Creates angles on plan between 85° & 235°.When using the 148 fitting the top of the tube needs to be closed using a 133 end cap. The 148 fittings are used in pairs.
149 : SLEEVE JOINT
tube size
Typicallyusedonshallowslopingguardrailbetween0°and11°atthestartorendofaruntoconnectthe upright to the top rail.This fitting can be used at either the bottom or top of an incline. Normally used in conjunction with the 153 fitting.
a
Typically used for offset variable angle sloping guardrail in conjunction with a 101 or 125 fitting. This fitting eliminates the need for specialised angle fittings such as the 126 or 127.
type
156 : TWO SOCKET CROSS 0° - 11°
0.33 0.39 0.50 0.55 1.14
a
b
0°-11°
type
tube size
a
b
156C 156D
42.4 48.3
144 158
72 79
c
d
e
Ø
Kg 0.93 1.00
Typically used on shallow sloping guardrail between 0° and 11° to connect the mid or lower rails to the upright.Theuprightmustremaincontinuouswiththecrossrailscut.Normallyusedinconjunctionwiththe 155 fitting.
Inline external connector for joining two tubes together in a run. For an inline joint that is the same diameter as the tube, the 150 fitting should be used. Not recommended as a structural joint.
150 : INTERNAL JOINT a
b
8
sales@tubeclamps.co.uk ©2011 - Tubeclamps Ltd. All rights reserved
type
tube size
a
b
150B 150C 150D
33.7 42.4 48.3
75 75 75
19 19 19
c
d
e
Ø
Inline internal connector for joining two tubes together. Only medium gauge 3.2mm wall thick tube can be used. The 150 should never be used as a load bearing joint. The 150 must be used within 100mm of an upright.
Kg 0.25 0.35 0.45
158 : FOUR WAY CROSS a a a
a
type
tube size
a
158A 158B 158C 158D 158E
26.9 33.7 42.4 48.3 60.3
41 48 60 67 86
b
c
d
e
Ø
Kg 0.60 0.84 1.21 1.19 2.50
A FourWay Cross for joining tubes together in the centre of a structure.The fitting allows the upright to pass through the centre with the cross rails joining at 90° to the upright.
www.tubeclamps.co.uk ©2011 - Tubeclamps Ltd. All rights reserved
9
160 : CLAMP ON CROSSOVER
a
type
tube size
a
160A 160B 160C 160D 160E
26.9 33.7 42.4 48.3 60.3
28 34 43 49 62
b
c
d
e
Ø
Kg
168M : 90° CORNER SWIVEL MALE SECTION
0.18 0.30 0.47 0.65 0.81
161 : 90° CROSSOVER b a
type
tube size
a
b
161A 161B 161C 161D 161E 161BC 161BD 161CD
26.9 33.7 42.4 48.3 60.3 33.7 / 42.4 33.7 / 48.3 42.4 / 48.3
36 40 45 51 61 45 51 51
35 40 49 55 64 45 48 52
c
d
e
Ø
Kg 0.20 0.34 0.41 0.54 1.06 0.46 0.50 0.59
tube size
a
168AM 168BM 168CM 168DM
26.9 33.7 42.4 48.3
40 44 49 53
b
c
d
e
Ø
Kg 0.28 0.30 0.34 0.38
Double male fitting with the connection lugs at 90° to each other.This fitting can also be used to retain display panels etc. in place. THIS FITTING IS NOT DESIGNED TO WITHSTAND LATERAL LOADINGS.
a
Typically used for adding to an existing offset structure without the need for any dismantling.
type
168 : 90° CORNER SWIVEL COMBINATION
type
tube size
173F
168A 168B 168C 168D
26.9 33.7 42.4 48.3
173F
a
b
c
d
e
Ø
Kg 0.90 1.06 1.29 1.50
Adoublecornerswivelconnectortypicallyusedforslopingguradrail.Thisfittingcombines1x168M&2 x173F.Theswivelscantravelapproximately85°fromthehorizontalinbothdirections.THIS FITTING IS NOT DESIGNED TO WITHSTAND LATERAL LOADINGS. AN ENTIRE STRUCTURE SHOULD NOT BE BUILT USING ONLY SWIVEL FITTINGS, THIS WOULD BE UNSTABLE.
168M
Typically used for racking systems or offset guardrail. Tubes cannot be joined inside this fitting.
A161 : ADD ON 90° CROSSOVER
type
tube size
a
b
A161C A161D
42.4 48.3
49 55
46 50
c
d
e
Ø
Kg
169M : SWIVEL BASE SECTION
0.65 0.73
a
167M : DOUBLE MALE SECTION OF SWIVEL b
c a
a
b
165A 165B 165C 165D 165E
26.9 33.7 42.4 48.3 60.3
40 48 60 67 86
35 40 50 56 68
d
e
Ø
Kg
b c
tube size
a
b
c
26.9 33.7 42.4 48.3 60.3
32 32 32 32 50
40 44 49 52 63
8 8 8 8 8
169 : SWIVEL BASE 173F
169M
167M
167A 167B 167C 167D 167E
26.9 33.7 42.4 48.3 60.3
sales@tubeclamps.co.uk
e
Ø
Kg 0.27 0.28 0.34 0.35 0.63
170 : MESH PANEL CLIP - SINGLE a
Doublemalefittingwiththeconnectionlugsat180°toeachother.Thisfittingcanalsobeusedtoretain display panels etc. in place. THIS FITTING IS NOT DESIGNED TO WITHSTAND LATERAL LOADINGS.
tube size
173F
d
a
b
c
d
e
Ø
Kg 0.90 1.06 1.25 1.45 2.50
Adoubleinlineswivelconnector.Typicallyusedonslopingguardrail.Thisfittingcombines1x167M&2 x173F.Theswivelscantravelapproximately85°fromthehorizontalinbothdirections.THIS FITTING IS NOT DESIGNED TO WITHSTAND LATERAL LOADINGS. AN ENTIRE STRUCTURE SHOULD NOT BE BUILT USING ONLY SWIVEL FITTINGS, THIS WOULD BE UNSTABLE.
b
c
d
e
Ø
Kg
169CM
N/A
50
81
111
40
8
10
0.35
e
0.30 0.57 0.79 0.96 1.65
type
type
©2011 - Tubeclamps Ltd. All rights reserved
c
167AM 167BM 167CM 167DM 167EM
167 : DOUBLE SWIVEL COMBINATION
173F
10
tube size
a
a
d
Acombinationfittingtypicallyusedfortheconstructionofpalletrackingorshelvedrackingsystems.Tube cannot be joined inside this fitting.
b
b
type
tube size
Non-structural male locating base, typically used to create a swivel base. THIS FITTING IS NOT DESIGNED TO WITHSTAND LATERAL LOADINGS.
TheAddOnShortTeeallowsadditionstoexisitingstructureswithouttheneedforanydismantling.This fittingisdesignedtogivea90degreeoffsetcrossoverjoint.Thetubescannotbejoinedwithinthisfitting.
165 : COMBINATION SOCKET
type
b
171 : MESH PANEL CLIP DOUBLE a
c
tube size
169A 169B 169C 169D 169E
26.9 33.7 42.4 48.3 60.3
a
b
c
d
e
Ø
Kg
10 10 10 10 10
0.64 0.77 0.94 0.98 1.29
Non-structural male locating swivel. This fitting combines 1 x 169M & 1 x 173F. The swivel can travel approximately 85° from the horizontal in both directions.THIS FITTING IS NOTTO BE USED AS A BASE PLATE FOR GUARDRAIL. THIS FITTING IS NOT DESIGNED TO WITHSTAND LATERAL LOADINGS.
type
tube size
a
b
c
170A 170B 170C 170D 170E
26.9 33.7 42.4 48.3 60.3
27 30 33 38 44
26 26 26 26 26
58 61 64 68 75
d
e
Ø
Kg 0.06 0.07 0.08 0.09 0.09
Asinglemeshpanelclip.Typicallyusedforretainingweldmeshpanelsintoguardrail.Tocorrectlyretainthe weldmeshpanelinplaceusingthisclip,themeshshouldbeframedwitha8mmbar.Note-DimensionC can be increased by up to 10mm.
c
b
type
a
b
c
type
tube size
a
b
c
171A 171B 171C 171D 171E
26.9 33.7 42.4 48.3 60.3
27 30 33 38 44
26 26 26 26 26
58 61 64 68 75
d
e
Ø
Kg 0.09 0.12 0.13 0.13 0.14
Adoublemeshpanelclip.Typicallyusedforretainingweldmeshpanelsintoguardrail.Tocorrectlyretain theweldmeshpanelinplaceusingthisclip,themeshshouldbeframedwitha8mmbar.Note-Dimension C can be increased by up to 10mm.
www.tubeclamps.co.uk ©2011 - Tubeclamps Ltd. All rights reserved
11
173M : SINGLE MALE SECTION OF SWIVEL b a
type
tube size
a
b
173AM 173BM 173CM 173DM 173EM
26.9 33.7 42.4 48.3 60.3
32 32 32 32 48
38 42 47 50 60
c
d
e
Ø
Kg
184 : 45° TEE
0.18 0.20 0.21 0.24 0.53
a
type
tube size
a
184B 184C 184D
33.7 42.4 48.3
45 54 60
b
c
d
e
Ø
Kg 0.49 0.69 0.91
The 45° Tee is used as a bracing and strut component for strengthening structures.
Asinglemalefittingwithoneconnectionlug.Thisfittingcanalsobeusedtoretaindisplaypanelsetc.in place. THIS FITTING IS NOT DESIGNED TO WITHSTAND LATERAL LOADINGS.
173F : FEMALE SECTION OF SWIVEL c d b
type
tube size
a
b
c
d
173AF 173BF 173CF 173DF 173EF
26.9 33.7 42.4 48.3 60.3
39 41 44 50 70
35 35 35 35 40
53 60 63 70 95
10 10 10 10 10
e
Ø
Kg 0.28 0.34 0.41 0.46 0.88
Female section used in conjunction with the male fittings (167M, 168M, 169M & 173M).THIS FITTING IS NOT DESIGNED TO WITHSTAND LATERAL LOADINGS.
a
173 : SINGLE SWIVEL COMBINATION 173M
tube size
173A 173B 173C 173D 173E
26.9 33.7 42.4 48.3 60.3
a
b
c
d
e
Ø
176 : SIDE OUTLET TEE a
a
type
tube size
a
176A 176B 176C 176D 176E
26.9 33.7 42.4 48.3 60.3
40 48 60 66 86
b
c
d
e
Ø
type
tube size
a
179A 179B 179C 179D 179E
26.9 33.7 42.4 48.3 60.3
22 25 25 25 40
b
c
d
e
Ø
Typicallyusedasalockingcollarorforprovidingadditionalstrengthtofittingsonhighloadstructures.
a
b
c
d
185D
48.3
67
89
83
51
e
Ø
Kg 1.19
Typically used for the eaves end of a roof system in conjunction with the 191.
c
191 : 27½° RIDGE FITTING a
type
tube size
a
b
191D
48.3
67
89
c
d
e
Ø
Kg 0.96
Typically used for the ridge of a roof system in conjunction with the 185.
a
b
27.5 °
192 : WEATHER SHIELD
b
type
tube size
a
b
192B 192C 192D
33.7 42.4 48.3
140 150 166
125 150 150
c
d
e
Ø
Kg 0.25 0.30 0.35
Typicallyusedforweatherprotectionarounda132fittingonaflatroofguardrailsystem.Thisfittingneeds to be sealed with a suitable sealant. For installation details see page 19.
a
199 : FIXING BRACKET b
Kg 0.15 0.15 0.18 0.21 0.31
tube size
d
Kg 0.42 0.49 0.94 0.87 1.67
type
b
Kg
Typically used for constructing market stall or play frame structures.
179 : LOCKING COLLAR
27.5 °
0.48 0.60 0.71 0.86 1.47
Single inline swivel connector.Typically used on sloping guardrail.This fitting combines 1 x 173M & 173F. The swivels can travel approximately 85° from the horizontal in both directions. THIS FITTING IS NOT DESIGNED TO WITHSTAND LATERAL LOADINGS. AN ENTIRE STRUCTURE SHOULD NOT BE BUILT ONLY USING SWIVEL FITTINGS, THIS WOULD BE UNSTABLE.
173F
a
type
185 : 27½° EAVES FITTING
a
type
tube size
a
b
199B 199C 199D
33.7 42.4 48.3
45 53 56
25 40 40
c
d
e
Ø
Kg
6 11 11
0.18 0.34 0.37
Typicallyusedforfixingpanels,displayboardsorflooringtostructures.Thefittingissuppliedwithapredrilled hole.
231 : EXTRA SET SCREWS
232 : HEXAGON KEY
233 : DUAL RATCHET
TYPE a 231A 1/4” BSP SHORT
TYPE a 232ABC 1/4” A/F
TYPE a 233ABC 1/4” A/F
231BC 231DE
232DE (AF - across flat)
233DE (AF - across flat)
a
182 : HOOK
c a d
12
b
sales@tubeclamps.co.uk ©2011 - Tubeclamps Ltd. All rights reserved
type
tube size
a
b
c
d
182A 182B 182C 182D
26.9 33.7 42.4 48.3
32 34 39 41
25 25 25 25
10 13 13 13
25 21 25 25
e
Ø
Kg 0.17 0.25 0.25 0.30
AChainHook.Thisisnotrecommendedasapermanentchainlocation,forpermanentchainlocationsone end should be retained in place using a 173M fitting and fixed with a nut and bolt.
1/4” BSP 3/8” BSP
Proprietarycoated,casehardenedsetscrews.Thesetscrews when tightened to a torque of 39Nm, give a slip load of 900kg to a safety factor of 2.
5/16” A/F
Hexagonal Allen Key. This is the only tool required to tighten up a setscrew.
5/16” A/F
DualHeadedRatchetKey.Theratchetissuppliedwithtwo removable hexagon heads to enable all setscrews to be tightened to the correct torque.
www.tubeclamps.co.uk ©2011 - Tubeclamps Ltd. All rights reserved
13
Handrailing for the disabled
DDA04 : INTERMEDIATE BRACKET
tube size
DDA04
e
The DDA range has been designed to meet the requirements laid down in the Disability Discrimination Act by providing a non-discriminatory handrail solution that complies with Part ‘M’ of the Building Regulations 2004 and is a smooth continuous handrail of 42.4mm diameter. DDA fittings are supplied Hot dip Galvanised as standard. DDA fittings can be powder coated making them more visible and in cold temperatures a powder coated finish will give the impression of being warmer to touch.
type
a
b
c
d
e
30
51
84
38
88
Ø
Kg 0.44
Bracket for supporting the top or middle rail tube at an upright in conjunction with a DDA01. The 42.4mm o/d tube is fixed to the DDA04 using either 2 x self tapping screws or 2 x pop rivets.
C/L OF TUBE
c
a d b
2 NO HOLES Ø 5.00 CSK
DDA05 : END RETURN
type
tube size
DDA05 d
a
b
c
d
e
90
82
8
86
46
Ø
Kg 0.64
Bracketforterminatingthe42.4mmo/dhandrailtubebacktoawall.Thisbracketisusedinconjunction with a DDA07.
b
e a
The DDA Range
c
3 NO HOLES Ø 6.50 CSK
Designed to satisfy the requirements of Part ‘M’ of the Buildings Regulations 2004.
DDA06 : 90° BEND
type
tube size
DDA06 c
a
b
c
33.7
35
50
d
e
Ø
Kg 0.93
Expanding elbow for creating a smooth 90° bend in the 42.4mm o/d tube. a
c
b b
DDA01 : UPRIGHT CONNECTOR
type
tube size
DDA01
a
b
c
55
40
48.3
d
e
Ø
Kg
Connector for attaching the DDA04 intermediate bracket or the DDA02 handrail connector to the 48.3mm o/d upright. b
a
0.38
DDA07 : INTERNAL CONNECTOR
type DDA07
a
c
tube size
a
b
c
42.4
75
19
d
e
Ø
Kg 0.35
Expanding internal connector for joining sections of 42.4mm o/d tube, or other DDA fittings as and when required.
a
DDA02 : HANDRAIL CONNECTOR
type
tube size
DDA02
c
a
b
c
d
51
86
30
38
e
Ø
0.48
Connector for attaching the end of the 42.4mm o/d handrail tube at 90° to the 48.3mm o/d upright. This bracket is used in conjunction with DDA01 and DDA07
d
b
Kg
DDA08 : END CAP - PLASTIC
type
tube size
DDA08
a
b
c
d
e
Ø
48.3
Kg 0.016
48.3mmo/dplasticendcapforinsertingintotheopentubeonthetopoftheupright.Forapermanent fix, a suitable adhesive should be used.
b
a a
DDA03 : WALL BRACKET
type a
DDA03
2 NO HOLES Ø 5.00 CSK
tube size
a
b
c
d
e
88
82
90
8
84
Ø
Kg 0.62
DDA09 : ADJUSTABLE BEND
type DDA09
Bracket for supporting the 42.4mm o/d handrail tube to a wall.The 42.4mm o/d tube is fixed to the DDA03 using either 2 x self tapping screws or 2 x pop rivets.
C/L OF TUBE
d
a
b
31
86
c
d
e
Ø
Kg 0.61
Fitting for creating an adjustable bend between the horizontal and the vertical. 30° to 220°
e
tube size
a
c
3 NO HOLES Ø 6.50 CSK
14
b
sales@tubeclamps.co.uk ©2011 - Tubeclamps Ltd. All rights reserved
b
www.tubeclamps.co.uk ©2011 - Tubeclamps Ltd. All rights reserved
15
UPRIGHT CONSTRUCTION FOR INLINE GUARDRAIL - SLOPING
The Diagram Shows a Typical DDA Range Installation
129
DDA uprights are 48.4mm O/D tube. DDA rails are 42.4mm O/D tube with a 3.2mm wall thickness. The DDA range conforms to the requirement for smooth continuous handrail between 40 - 45mm O/D.
126
130
101
TUBE BENT 132
ADJUST ABLE 30 - 60°
5
125
147 101
129
132
4
127
TUBE BENT
133
When using DDA03 or DDA04 fittings the tube can be connected using either self tapping screws or pop rivets. Uprights are 48.4mm O/D tube DDA rails are 42.4mm O/D tube
147
129
125
6
3
132
VARIABL E
132
132
0 - 45° MACHINED TO required angle
ADJUST ABLE 30 - 45°
FOR DETAILS AND DIMENSIONS ON BASE FIXINGS, REFER TO PAGE 19.
360° RO TAT ION
UPRIGHT CONSTRUCTION FOR INLINE GUARDRAIL - SLOPING 104 125
154
155
154
124
129 129
15-60°
2
153
153
156
119
124
130
101 129
1
152
152
BOTTOM END POST 0-11°
152
MID POST 0-11°
146
146
LEVEL TO SLOPIN G
TOP END POST 0-11°
146
LEVEL TO SLOPING USING 12
4
FOR DETAILS AND DIMENSIONS ON BASE FIXINGS, REFER TO PAGE 19.
UPRIGHT CONSTRUCTION FOR INLINE GUARDRAIL - LEVEL 133 133
125
128
104
176 + 133 to plug top of open end in upright
176
148
101
1
2
3
148
119
116
176
132
132
END POST
132
MID POST
132
DIVIDER
132
CORNER POST 90° TO 180°
90° CORNER POST
FOR DETAILS AND DIMENSIONS ON BASE FIXINGS, REFER TO PAGE 19.
GUIDE TO GUARDRAIL BAY SIZES (DIMENSIONS ARE UPRIGHT CENTRES)
DDA08, DDA01, DDA02, DDA07
4
5
DDA06 16
DDA08, DDA01, DDA04
DDA03
sales@tubeclamps.co.uk ©2011 - Tubeclamps Ltd. All rights reserved
DDA07, DDA09, DDA07
6
DDA07, DDA05
TYPE SIZE O/D Wall in mm Design Load N/m 360 740 Design Load N/m 360 740 1500
SIZE B 33.7 3.2
42.4 3.2
SIZE C 42.4 4.0
814 396
1369 666
1595 776
666 324 160
1120 545 269
1305 635 313
SIZE D 48.3 48.3 3.2 4.0 GUARDRAIL HEIGHT 900mm 1828 2584 889 1257 GUARDRAIL HEIGHT 1100mm 1496 2114 728 1028 359 507
SIZE E 48.3 5.0
60.2 3.7
60.2 4.5
3052 2229
3265 1588
3858 1876
2778 1824 900
2671 1300 641
3155 1535 757
Uprightwallthicknessisasthechart,crossrailsare3.2mmwallthicknesstube.Theabovearebasedonthemaximumpermissablebendingmomentofthetube. The dimensions above are for guidance only and are not intended to be used as an authorised specification dimension.
www.tubeclamps.co.uk ©2011 - Tubeclamps Ltd. All rights reserved
17
HOW TO CALCULATE CORRECT TUBE LENGTH - LEVEL
HOW TO CALCULATE CORRECT TUBE LENGTH - SLOPING, 0 - 11° SLOPE FITTINGS b
SIZE
x
A
14
B
17
B
22
D
25
E
30
b
155
c
CUTTING CHART
154
d
154
b
153
e
156
c f
Calculatingtheuprightheight-selectthetoprailfitting(153, 154,155).Subtracttherelevantdimensionfromtheupright length.Addorsubtractthedimensionforthegroundfitting being used.
Calculatingthecrossrailwidth-selectthefittingstobeused andsubtracttherelevantdimensionfromtheuprightcentres. The upright centres must be measured on the slope.
0-11°
a 152
CORED HOLE INTO CONCRET
x
BASE FIXING
DIMENSION ‘X’ D
0°
19
22
25
5°
16
19
10°
16
15°
B
C
D
0°
19
23
26
22
5°
22
25
29
16
19
10°
25
29
33
13
13
16
15°
25
33
35
20°
13
13
16
20°
29
33
38
25°
9
13
13
25°
33
35
42
30°
9
13
13
30°
35
42
45
35°
9
9
13
35°
39
45
52
40°
6
9
9
40°
42
49
57
45°
6
6
9
45°
48
55
64
=w w
-2
7 25
c
28
d
28
e
28
f
35
x
y x 132
z 134
E
MIN 300m m
DIMENSION ‘X’ C
a b
CUTTING DIMENSIONS FOR BASE AND WALL PLATES
HOW TO CALCULATE CORRECT TUBE LENGTH - SLOPING, 126 & 127 FITTINGS
B
DIMENSION
Cross rail
153
FOR DETAILS AND DIMENSIONS ON BASE FIXINGS, REFER TO PAGE 19.
CUTTING CHART
Upright
z 144
x 146
w = TUBE DIA + 30m m
131
x
y
z
A
6
-
5
B
6
115
5
C
6
127
6
D
6
127
6
145
Dimensionsxandzsubtractfromuprightlength.Dimensionyaddedtouprightlength.Uprightscastintoconcretepocketsmustbeflatononeendandtheholemin 300mm x 300mm x 300mm.
192 WEATHER FLANGE INSTALLATION PROCESS 1.
2.
3.
4.
Sealant
Sealant
FOR DETAILS AND DIMENSIONS ON BASE FIXINGS, REFER TO PAGE 19. 132
HOW TO CALCULATE CORRECT TUBE LENGTH - SLOPING, 129 & 130 FITTINGS
192
Asphal t
Conc rete
y
x
z
B
C
D
30°
35°
40°
45°
-34
x
-34
-37
-43
y
+24 +18 +11
+3
30° B
35°
40°
45°
x
32
34
37
44
y
55
51
48
46
z
+36 +42 +49 +58
z
36
40
43
46
x
-40
-48
-54
x
40
45
49
55
y
+29 +21 +12
+3
y
64
61
57
54
z
+44 +52 +61 +71
z
41
45
49
53
-44
x
-45
-55
-61
y
+33 +24 +14
-50
+3
z
+46 +55 +65 +77
C
D
x
46
51
56
61
y
78
74
64
65
z
55
58
61
66
Remove asphalt down to the conc rete. Fix 132 fitting to conc rete.
Dress asphalt ar ound 132 fitting. Insert upright and apply sealant as illustrated.
TCG1/TCG2 SELF CLOSING FABRICATED GATE & TWO POSTS
18
sales@tubeclamps.co.uk ©2011 - Tubeclamps Ltd. All rights reserved
Seal top of 192 fitting to the upright .
WIDE GATE HINGE MADE FROM FITTINGS 147
1070
Available in 48.3mm tube only. 550
101
TCG1 - Left hand gate TCG2 - Right hand gate
Tighten the setscrew on the 147 to the gate. Tighten the setscrew on the 101 to the 147. Tighten the setscrew on the 179 to the upright.
Slam Plate
1090
FOR DETAILS AND DIMENSIONS ON BASE FIXINGS, REFER TO PAGE 19.
Place 192 fitting on upright ensuring that the sealant is drawn down with it .
completewithrubberbacking pad and slotted hole. GA TE
UPRIGHT
179
Leave the setscrew on the 101 to the upright loose.
www.tubeclamps.co.uk ©2011 - Tubeclamps Ltd. All rights reserved
19