569 by Huws Gray Ltd

2015 EDITION 1

COMPLETE Industrial Power Tool Catalogue

CORDLESS TOOLS Smarter Smaller Stronger Lighter

BRUSHLESS

Long Life More Work

Brushless DC motor

More work amount on a single full battery charge

Durable against continuous long operation

:: Maintenance-free due to no brush. :: Energy production is more e cient than brushed DC motor because of no friction loss caused by brushes, enabling to lower amperage for reduced heat production and increased work amount on a single full battery charge.

:: Thanks to the very e cient energy production of BLDC motor, work amount on a single full battery charge is increased. :: Life time work amount of a battery is increased, reducing the battery cost.

:: Use of BLDC motor lowers heat production; the temperature rise at housing surface can be recessed, even in hard industrial applications requiring continuous long operation.

*SEE THE RANGE OF BRUSHLESS MACHINES IN THE CATALOGUE MARKED WITH

BRUSHLESS

Li-Ion Battery & Charger Time Reference, Compatibility Chart DC18RC

DC18SE

Fast Charger

Automotive Charger

18V

Lithium-ion

45 min.

5.0 Ah BL1850

Fast Charging

110 min.

Current models in

1 which battery protection

(196673-6)

36 4.0

min.

Fast Charging

BL1840

circuit has been added with engineering change (with mark) indicated on the battery terminal of machine.

90 min.

(632B28-8)

22 3.0

min.

Fast Charging

BL1830

Compatibility of 4.0Ah and 5.0Ah batteries

60 min.

New models - all machines starting with â&#x20AC;&#x153;Dâ&#x20AC;? will be compatible with the Makita 4.0Ah battery, eg DHP458.

No discharging required

(638409-2)

15 min.

1.5 Ah BL1815N (632A54-1)

Fast Charging

30 min.

Z...

CORDLESS TOOLS Powered by two 18V Li-Ion batteries DHR263ZK 26mm SDS+ new

DHS710ZK 190mm new

3 operation modes

Cordless Rotary Hammer

* Rotary Hammer sold without bits. Capacities Concrete 26mm Steel 13mm Wood 32mm No Load Speed 0-1,200r/min Impacts per min 0-4,800i/min Net Weight 4.7kg Li-Ion Ah 5.0 4.0 3.0 1.5

SPECIFICATIONS

Cordless Circular Saw

DUC302Z 300mm new Cordless Chain Saw

New adjustment lever for easier tool-less chain adjustment.

Battery capacity warning lamp.

SPECIFICATIONS

CB442

36V

Blade Diameter 190mm Max. Cutting Capacity At 0° 68.5mm At 45° 49mm No Load Speed 4,800r/min Net Weight 4.1kg Li-Ion Ah 5.0 4.0 3.0 1.5

SPECIFICATIONS CB442

36V

Chain Speed Cutting Length Chain Pitch Net Weight

Li-Ion

500m/min 300mm 3/8” or 1/4” 4.1kg Ah 5.0 4.0 3.0 1.5

CB442

36V

* Unless otherwise indicated, although 18V + 18V Li-Ion tools are portrayed with batteries, they are sold as tool only without batteries and charger. This allows you to make up the most cost effective set of tools, batteries and chargers to suit your needs.

CC300DW

85mm Cordless Cutter

1.3Ah

Smooth and powerful glass and tile cutting.

SPECIFICATIONS Maximum Cutting Capacities At 0° 25.5mm At 45° 16.5mm Blade Diameter 85mm No Load Speed 1,400 r/min Tank capacity Water 0.5L Net Weight 1.7kg Supplied with: 1 x 1.3Ah 10.8V Li-Ion Battery, Charger, Diamond Wheel Hex Wrench and Watery Supply Tank Assembly.

Li-Ion

10.8V Li-Ion Rechargeable Battery

10mm Cordless Impact Driver Drill & Cordless Radio MR051 : Compact design with AUX-IN jack and earphone jack.

SPECIFICATIONS Impact Driver Drill

SPECIFICATIONS Cordless Radio

Capacities Steel 10mm Wood 21mm Masonry 8mm Impacts per Minute Hi 0 - 22,500 Lo 0 - 6,000 No Load Speed Hi 0 - 1,500 r/min Lo 0 - 400 r/min Max. Fastening Torque Hard 24N.m Soft 12N.m Net Weight 1.1kg Li-Ion Ah 1.3

Practical Maximum Output 1.0W Continuous Use 2.5 hours Frequency Band AM 520 - 1710kHz FM 87.5 - 108MHz Net Weight 0.49kg

Li-Ion

86 10.8V

Ah 1.3

10.8V

BL1013 1.3Ah

DK1202 - HP330DWE & MR051 COMBO HP330DWE : Lightweight and compact with 2-speed gear selection. 24Nm.

Ah 1.3

Compatible with ALL Makita 10.8V Li-Ion Tools.

DC10WA

Battery Charger SPECIFICATIONS Fast Charging Times 7.2V Li-Ion 1.0Ah 30 minutes 10.8V Li-Ion 1.3Ah 50 minutes

10.8V

Supplied with: 2 x 1.3Ah 10.8V Li-Ion Batteries, Charger, Carry Bag & MR051 Radio.

CORDLESS TOOLS DGA454ZK 115mm new

DGA452ZK 115mm Cordless Angle Grinder

Cordless Angle Grinder

Powerful angle grinder now free from cord.

Brushless DC motor generates less heat buildup and is ideal for prolonged use in manufacturing / production applications.

Battery fuel gauge.

BRUSHLESS

SPECIFICATIONS Max. Capacities (dia.) Depressed Centre Wheel 115mm Abrasive Disc 115mm Diamond Wheel 115mm No Load Speed 10,000 r/min Net Weight 1.9kg Li-Ion Ah 5.0 4.0 3.0 1.5

SPECIFICATIONS

CB430

Max. Capacities (dia.) Depressed Centre Wheel 115mm Abrasive Disc 115mm Diamond Wheel 115mm No Load Speed 8,500 r/min Net Weight 2.5kg Li-Ion Ah 5.0 4.0 3.0 1.5

Model: DGA454ZK

18V

DSS610ZK 165mm

DUB182Z

Lightweight and compact design.

High / Medium / Low Air volume settings.

DVC350Z

Cordless Blower

Cordless Circular Saw

18V

Cordless Vacuum Cleaner Portable dust extraction.

SPECIFICATIONS Blade Diameter 165mm Bore Size 20mm Max. Cutting Capacity At 0째 57mm At 45째 40mm At 50째 36mm No Load Speed 3,700r/min Net Weight 3.2kg Li-Ion Ah 5.0 4.0 3.0 1.5

Runtime: High - 13min Low - 26min (3.0Ah)

CB441

18V

SPECIFICATIONS

Air Volume 2.6m3/min Air Pressure 5.4kpa No Load Speed 0-18,000 r/min Net Weight 1.7kg Li-Ion Ah 5.0 4.0 3.0 1.5 1.3

Max. Peak Air Flow Max. Sealed Suction Recoverable Capacity Net Weight Li-Ion Ah 5.0

18V

3.4m3/min 5.5kpa Dust: 3.0L 2.2kg 4.0 3.0 1.5 1.3

DCL180Z

DCG180ZK new

DDA350ZK 10mm

Optimum cleaner for a variety of applications.

Variable speed control for maximum control of sealant flow rate.

Compact angle head with small head height.

Cordless Cleaner

Cordless Caulking Gun

18V

Cordless Angle Drill

Sealant not included *Standard with 300ml cartridge.

Anti-drip function.

SPECIFICATIONS Capacity 650mL Continuous Use 20 min on full 3.0Ah battery Max. Air Flow 1.3m3/min Max. Sealed Suction 3.6kPa Net Weight 1.2kg 18V Li-Ion Ah 5.0 4.0 3.0 1.5 1.3

SPECIFICATIONS

Max Pushing Force 5,000N No Load Speed 0-28mm/sec Net Weight 2.1kg Li-Ion Ah 5.0 4.0 3.0 1.5 1.3

18V

Capacities Steel Wood No Load Speed Net Weight

Li-Ion

10mm 25mm 0-1,800r/min 1.8kg Ah 5.0 4.0 3.0 1.5

CB440

DHP453RYEX 13mm

Cordless Impact Driver Drill Kit 42Nm

Model: DHP453RYEX No Load Speed

SPECIFICATIONS Capacity Steel Wood Masonry Impacts per Minute

13mm 36mm 13mm Hi : 0-19,500 Lo : 0-6,000

Maximum Torque Net Weight

Hi : 0-1,300r/min Lo : 0-400r/min Hard : 42Nm Soft : 27Nm 1.7kg

Supplied with: Driver Drill, 2 x 1.5Ah 18V Li-Ion Batteries Charger & 67 Piece Accessory Set. Li-Ion Ah 5.0 4.0 3.0 1.5 1.3

6 18V

* Unless otherwise indicated, although 18V Li-Ion tools are portrayed with a battery, they are sold as tool only without battery and charger. This allows you to make up the most cost effective set of tools, batteries and chargers to suit your needs.

18V

CORDLESS TOOLS DHP481ZK 13mm new

DHP456ZK 13mm

DHP458ZK 13mm

Battery over-discharge protection.

Extremely compact tool size.

SPECIFICATIONS

Capacity Steel Wood Masonry Impacts per Minute

Cordless Impact Driver Drill 91Nm

Cordless Impact Driver Drill 50Nm

13mm 38mm 13mm Hi : 0-22,500 Lo : 0-6,000 No Load Speed Hi : 0-1,500r/min Lo : 0-400r/min Maximum Torque Hard : 50Nm Soft : 36Nm Net Weight 1.6kg Li-Ion Ah 5.0 4.0 3.0 1.5 1.3

6 CB440

18V

Cordless Impact Driver Drill 98Nm BRUSHLESS

13mm 76mm 16mm Hi : 0-30,000 Lo: 0-6,000 No Load Speed Hi: 0-2,000 r/min Lo : 0-400 r/min Maximum Torque Hard : 91Nm Soft : 58Nm Net Weight 2.3kg Li-Ion Ah 5.0 4.0 3.0 1.5

26 CB440

18V

13mm 76mm 16mm Hi : 0-31,500 Lo: 0-8,250 No Load Speed Hi: 0-2,100 r/min Lo : 0-550 r/min Maximum Torque Hard : 98Nm Soft : 54Nm Net Weight 2.4kg Li-Ion Ah 5.0 4.0 3.0 1.5 18V

DJV180ZK 26mm

DJV182ZK 26mm new

DJR181ZK 28mm

High accuracy and efficiency.

Equipped with high power Brushless DC motor.

Extra high cutting speed.

Cordless Jig Saw

Cordless Recipro Saw

Cordless Jig Saw

*Supplied without dust nozzle.

BRUSHLESS

SPECIFICATIONS

Length of Stroke 26mm Max Cutting Capacities In Steel at 90° 10mm In Wood at 90° 135mm In Aluminium at 90° 20mm Strokes per Minute 0 - 2,600 Net Weight 2.8kg Li-Ion Ah 5.0 4.0 3.0 1.5

Length of Stroke Max Cutting Capacities In Steel at 90° In Wood at 90° Strokes per Minute Net Weight

SPECIFICATIONS

26mm

Length of Stroke 28mm Max Cutting Capacities In Pipe 130mm In Wood 255mm CB430 Strokes per Minute 0-2,900 Net Weight 3.7kg 18V 18V Li-Ion Ah 5.0 4.0 3.0 1.5 Li-Ion Ah 5.0 4.0 3.0 1.5 * Although Jig & Recipro Saws are portrayed with blades they are sold without blades.

Model: DTW450ZK

10mm 135mm 800 - 3,500 2.6kg

CB441

18V

DTW281ZK 12.7mm new

DTW251ZK 12.7mm Cordless Impact Wrench 230Nm

Cordless Impact Wrench 280Nm

High torque to weight ratio. BRUSHLESS

*Impact Wrench is sold without socket.

Equipped with high power Brushless DC motor.

SPECIFICATIONS

DTD146Z 6.35mm Cordless Impact Driver 160Nm

Enhanced dust and drip-proof performance in compact design with overall length of only 138mm.

SPECIFICATIONS Capacities Machine Screw M4-M8 Standard Bolt M5-M14 High Tensile Bolt M5-M12 Coarse Thread (length) 22mm-125mm No Load Speed 0-2,300r/min Impacts per Minute 0-3,200 CB440 Maximum Fastening Torque 160Nm Net Weight 1.3kg 18V Li-Ion Ah 5.0 4.0 3.0 1.5 1.3 * Although Impact Driver is portrayed with bit it is sold without bits.

Capacities Standard Bolt M10-M16 High Tensile Bolt M10-M14 Impacts per Minute 0 - 3,200i/min No Load Speed 0 -2,100r/min Maximum Fastening Torque 230Nm Net Weight 1.5kg Li-Ion Ah 5.0 4.0 3.0 1.5 1.3

SPECIFICATIONS

CB440

18V

DTW450ZK12.7mm

Capacities Standard Bolt M10-M20 High Tensile Bolt M10-M16 Impacts per Minute 0 - 3,500i/min No Load Speed 0 -2,800r/min Maximum Fastening Torque 280Nm Net Weight 1.5kg Li-Ion Ah 5.0 4.0 3.0 1.5

18V

Cordless Impact Wrench 440Nm

Same fastening torque in forward and reverse rotation.

SPECIFICATIONS Capacity Square Drive 12.7mm Impacts per Minute 2,200i/min No Load Speed 1,600 r/min Max. Fastening Torque 440Nm Net Weight 3.4kg Li-Ion Ah 5.0 4.0 3.0 1.5 18V

Model: DTW281ZK CB441

CORDLESS TOOLS DHR202ZK 20mm SDS+

Cordless Rotary Hammer Lightweight with 3 operation modes.

82mm Cordless Planer

DTM50ZK

New aesthetic design incorporating safety foot.

Wide selection of accessories available for various applications.

Cordless Multi Tool

Reversible mini TCT blades.

SPECIFICATIONS Capacities Concrete Steel Wood No Load Speed Blows per Minute Net Weight

DKP180Z

20mm 13mm 26mm 0-1,100r/min 0-4,000 3.5kg

Li-Ion

Ah 5.0 4.0 3.0 1.5 * Rotary Hammer sold without bits.

Rebate

9mm

SPECIFICATIONS CB441

18V

DBO180Z

Cordless Random Orbital Sander

SPECIFICATIONS

Planing Width 82mm Max Planing Depth 2.0mm No Load Speed 14,000r/min Net Weight 3.4kg Li-Ion Ah 5.0 4.0 3.0 1.5

CB441

18V

Oscillations per Minute Net Weight

Li-Ion

6,000 - 20,000 1.8kg Ah 5.0 4.0 3.0 1.5 1.3

18V

B/DFR550Z

B/DFS450ZK

Cordless Autofeed Screwdriver

Cordless Drywall Screwdriver

Reliable sturdy aluminium casing attachment.

Excellent performance with high orbital speeds.

Easy bit changes with one-touch locator.

SPECIFICATIONS SPECIFICATIONS

SPECIFICATIONS

Pad Diameter 123mm Abrasive Disc Diameter 125mm Orbits Per Minute 7,000/9,500/11,000 Net Weight 1.7kg Li-Ion Ah 5.0 4.0 3.0 1.5

Capacities Drywall Screw Driving Shank (hex) Net Weight

18V

Li-Ion

4mm 6.35mm hex 1.7kg

18V

Ah 3.0 1.5 1.3

DUH523Z

DML801

Rubberized soft grip provides comfortable and sure grip.

Fluorescent light / Flashlight.

User-replaceable blade.

Rotatable and foldable light head enables you to use this product as a compact stationary flashlight.

Cordless Hedge Trimmer

CB440

new

Capacities Drywall Screw Bit Size No Load Speed Net Weight

4x22-55mm 6.35mm hex 4,000r/min 2.1kg

18V Li-Ion Ah 3.0 1.5 1.3 * Although autofeed screwdriver is portrayed with autofeed screws it is sold without screws. Model: DML801

LED Flashlight

SPECIFICATIONS SPECIFICATIONS Blade Length 520mm Strokes per min (s/min) 1,350 Net Weight 3.1kg

Li-Ion

Ah 5.0 4.0 3.0 1.5 1.3

18V

Current 0.6A Continuous Use 9 hours (3.0Ah) Net Weight (without battery) 0.68kg

Li-Ion

Ah 5.0 4.0 3.0 1.5 1.3

18V

B/DML186

DML802

DMR102

6 highly-efficient LEDâ&#x20AC;&#x2122;s provide long continuous bright illumination.

High luminance 3.2W single LED.

MP3 input.

LED Flashlight

SPECIFICATIONS

Current Continuous Use

0.6A 25hrs (1.3Ah) 50hrs (3.0Ah) Net Weight (without battery) 0.54kg Li-Ion Ah 5.0 4.0 3.0 1.5 1.3

Job Site Radio

Rechargeable Flashlight

18V

0.6A 6hrs (1.3Ah) 13hrs (3.0Ah) Net Weight (without battery) 0.65kg Li-Ion Ah 5.0 4.0 3.0 1.5 1.3

Practical Max. Output 9.6V: 0.8Wx2 12V: 1.2Wx2 14.4V: 2Wx2 18V: 3Wx2 Frequency Band Range AM: 522 - 1629kHz FM: 87.5-108MHz

18V

CB440

Works with all 7.2 - 18V Makita batteries INCLUDING 10.8V.

CORDLESS TOOLS 2.6Ah

DC36RA for BL3626 only Charging time

Fast Charging System

BL3626

22 min.

(194873-2)

* Although Rotary Hammer is portrayed with a bit it is sold without bits.

BUB360Z

BML360

BHR262RDE 26mm SDS+

Cordless Blower

Rechargeable Fluorescent Light Wide and bright illumination provided by 27W flat double twin-tube compact fluorescent lamp.

Cordless Rotary Hammer 3 Operation Modes

High power and environmentally friendly.

Outstanding performance from 36V Li-Ion battery.

SPECIFICATIONS Capacities Concrete Steel Wood No Load Speed Impacts per Minute Net Weight

SPECIFICATIONS Air Volume Air Speed

SPECIFICATIONS

Hi: 4.4m3/min Lo: 2.6m3/min Hi: 93m/s Lo: 57m/s Hi: 17,000 r/min Lo: 10,000 r/min 3.1kg

26mm 13mm 32mm 0-1,200r/min 0-4,800 4.5kg

No Load Speed Supplied with: Rotary Hammer, Continuous Use 210min (2.6Ah) 2 x 2.6Ah 36V Li-Ion Batteries Net Weight Net Weight (without battery) 2.3kg & Charger. 36V 36V Li-Ion Ah 2.6 Li-Ion Ah 2.6 Li-Ion Ah 2.6 * Unless otherwise indicated, although 36V Li-Ion tools are portrayed with a battery, they are sold as tool only without battery and charger. This allows you to make up the most cost effective set of tools, batteries and chargers to suit your needs.

CB442

36V

Ni-Cd Cluster Battery 8281DWALE 10mm Cordless Percussion Driver Drill 36Nm

8281DWPETC

Cordless Percussion Driver Drill with Tool Kit 36Nm

Includes ML140 Torch.

Includes 116 piece accessory set.

SPECIFICATIONS Capacities Steel Wood Masonry Blows per Minute No Load Speed Net Weight

SPECIFICATIONS

10mm 25mm 10mm Hi : 0 - 19,500 Lo : 0 - 6,000 Hi : 0 - 1,300r/min Lo : 0 - 400r/min 1.7kg

Capacities Steel Wood Masonry Blows per Minute

Supplied with: Driver Drill, 2 x 1.9Ah 14.4V Ni-Cd Batteries, Charger & Rechargeable Torch.

Ni-Cd

No Load Speed Net Weight

14.4V

Ah 1.9

10mm 25mm 10mm Hi : 0 - 19,500 Lo : 0 - 6,000 Hi : 0 - 1,300r/min Lo : 0 - 400r/min 1.7kg

Supplied with: Driver Drill, 2 x 1.3Ah 14.4V Ni-Cd Batteries, Charger & 116 Piece Accessory Set.

Ni-Cd

Ah 1.3

Model: 8281DWPETC

14.4V

8444DWAE

13mm Cordless Percussion Driver Drill Variable 3-Speed

80Nm

Metal eXtreme Technology

SPECIFICATIONS

Capacities Steel Wood Masonry Blows per Minute

13mm 65mm 16mm 3rd:0 - 25,500 2nd:0 - 9,000 1st:0 - 4,500 No Load Speed 3rd:0 - 1,700r/min 2nd:0 - 600r/min 1st:0 - 300r/min Maximum Torque Hard:80Nm Soft:40Nm Net Weight 2.7kg Supplied with: Driver Drill, 2 x 1.9Ah 18V Ni-Cd Batteries & Charger.

Ni-Cd

6 CB430

18V

Model: 8444DWAE

Ah 1.9

INDUSTRIAL POWER TOOLS ANGLE GRINDERS GA4530

GA4534

115mm

115mm new

9557HNG

115mm

Ergonomically designed barrel body for easy handling.

Easy to operate paddle switch by the hand gripping motor housing.

High performance motor.

SPECIFICATIONS

Max. Capacities (dia.) Depressed Centre Wheel Abrasive Disc Diamond Wheel No Load Speed Net Weight Power Supply Cord

GA4540

115mm 115mm 115mm 11,000 r/min 1.8kg 2.5m

CB459

720W

115mm new

9558HP

115mm 115mm 115mm 11,000 r/min 1.9kg 2.5m

CB459

720W

GA5010

125mm

“Super Joint System II” developed for effective vibration absorption.

Non-locking paddle switch grinders are for use in workplaces where safety is specified, especially in the mining & petrochemical industries.

SPECIFICATIONS

Max. Capacities (dia.) Depressed Centre Wheel Abrasive Disc Diamond Wheel No Load Speed Net Weight Power Supply Cord

GA5040

115mm 115mm 115mm 11,000 r/min 2.4kg 2.5m

CB325

1,100W

125mm new

9565CV

Extra Slim design.

125mm 125mm 125mm 11,000 r/min 2.4kg 2.5m

CB325

1,100W

180mm

Max. Capacities (dia.) Depressed Centre Wheel Wire Cup Brush Cut-off Wheel No Load Speed Net Weight Power Supply Cord

840W

125mm

SPECIFICATIONS 125mm 125mm 125mm 11,000 r/min 2.1kg 2.5m

CB325

840W

Max. Capacities (dia.) Depressed Centre Wheel Abrasive Disc Diamond Wheel No Load Speed Net Weight Power Supply Cord

125mm 125mm 125mm 11,000 r/min 2.6kg 2.5m

CB304

1,050W

GA7020 180mm

125mm

Max. Capacities (dia.) Depressed Centre Wheel 125mm Abrasive Disc 125mm Diamond Wheel 125mm No Load Speed 2,800 12,000 r/min Net Weight 2.4kg Power Supply Cord 2.5m

Superior anti-dust structure.

SPECIFICATIONS

CB318

1,400W

GA9010C 230mm

Max. Capacities (dia.) Depressed Centre Wheel Wire Cup Brush Cut-off Wheel No Load Speed Net Weight Power Supply Cord

AC204

2,200W

Extra Slim design with “Deadman’s” switch.

High power to weight ratio for greater efficiency.

SPECIFICATIONS

180mm 110mm 180mm 8,500 r/min 5.5kg 2.5m

GA9050 230mm

Extra Slim design.

Compact & lightweight with high power to weight ratio for greater efficiency.

SPECIFICATIONS

CB325

SPECIFICATIONS

GA7010C

115mm 115mm 115mm 11,000 r/min 2.0kg 2.5m

Slim body and high durability.

High power motor with variable speed in small circumference barrel body.

“Super Joint System II” developed for effective vibration absorption.

Max. Capacities (dia.) Depressed Centre Wheel Abrasive Disc Diamond Wheel No Load Speed Net Weight Power Supply Cord

Most compact in its class

SPECIFICATIONS

Max. Capacities (dia.) Max. Capacities (dia.) 180mm Depressed Centre Wheel 230mm Depressed Centre Wheel 230mm 110mm Wire Cup Brush 110mm Wire Cup Brush 110mm 180mm Cut-off Wheel 230mm Cut-off Wheel 230mm AC204 AC204 8,400 r/min No Load Speed 6,000 r/min No Load Speed 6,600 r/min 4.3kg Net Weight 4.5kg Net Weight 4.7kg 2,000W 2,000W 2.5m Power Supply Cord 2.5m Power Supply Cord 2.5m * Although Angle Grinders are portrayed with a grinding disc, 180mm & 230mm Angle Grinders are sold without grinding discs.

AC204

2,000W

INDUSTRIAL POWER TOOLS ANGLE GRINDERS GA9020 230mm

GA9020K 230mm

GA9040SK01

Outstanding durability.

Gear housing can be positioned at every 90째, as with GA9020.

Anti-Vibrating Grip.

Rotatable rear handle.

With Carry Case.

SPECIFICATIONS

Max. Capacities (dia.) Depressed Centre Wheel Wire Cup Brush Cut-off Wheel No Load Speed Net Weight Power Supply Cord

230mm

SPECIFICATIONS

Max. Capacities (dia.) Depressed Centre Wheel 230mm Wire Cup Brush 110mm Cut-off Wheel 230mm AC204 AC204 No Load Speed 6,600 r/min Net Weight 6.7kg 2,200W 2,200W Power Supply Cord 2.5m * Although Angle Grinders are portrayed with a grinding disc, 180mm & 230mm grinders are sold without grinding discs. 230mm 110mm 230mm 6,600 r/min 5.9kg 2.5m

230mm 110mm 230mm 6,600 r/min 5.9kg 2.5m

BENCH GRINDER

STR GRINDER

GB602

GS5000 Straight Grinder

150mm

125mm

with WA60 & GC120 grinding wheels.

AC204

2,600W

BISCUIT JOINER PJ7000

New compact and lightweight design.

Lightweight with large soft grip.

SPECIFICATIONS Max. Wheel Size Grinding Wheel Hole Diameter No Load Speed Net Weight

SPECIFICATIONS 150x16mm 150WA60, 150GC120 12.7mm 2,850r/min 9.2kg

250W

Wheel Diameter Hole Diameter No Load Speed Net Weight Power Supply Cord

125mm 20mm 5,600r/min 5.0kg 2.5m

SPECIFICATIONS

750W

BAND SAW

BELT SANDERS

LB1200F

9032

305mm

9mm (6 or 13mm optional)

9031

100mm 11,000 r/min 2.5kg 2.5m

AC459

701W

30mm

Optimum use in close quarters or for irregular shapes.

Maximum sanding depth 110mm.

One touch lever for easy blade replacement.

Blade Diameter No Load Speed Net Weight Power Supply Cord

Ideal for glass.

SPECIFICATIONS Belt Size Belt Speed Max. Sanding Depth Net Weight Power Supply Cord

9401

9mm x 533mm 300 - 1,700 m/min 110mm 1.6kg 2.5m

SPECIFICATIONS AC410

500W

Belt Size Belt Speed Net Weight Power Supply Cord

9403

100mm

Perfect for flush along side sanding.

30mm x 533mm 200 - 1,000 m/min 2.1kg 2.5m

AC410

550W

100mm

Powerful motor for high production use.

SPECIFICATIONS Capacity Throat Thickness of Cut Blade Speed Hi Lo Net Weight Power Supply Cord

305mm 165mm 800 m/min 400 m/min 81.2kg 2.5m

SPECIFICATIONS

900W

Belt Size Belt Speed Net Weight Power Supply Cord

100mm x 610mm 350 m/min 7.3kg 5m

AC155

1,040W

Belt Size Belt Speed Net Weight Power Supply Cord

100mm x 610mm 500 m/min 5.7kg 5m

AC304

1,200W

INDUSTRIAL POWER TOOLS HEAT GUN

BLOWERS UB1100

UB1101

HG551VK

Powerful Motor.

Temperature controlled by potentiometer.

(Variable speed with dust bag)

(Without dust bag) SPECIFICATIONS

SPECIFICATIONS 2.8m3/min. 5.5kPa 16,000 r/min 1.9kg 2.5m

Air Volume Air Pressure No Load Speed Net Weight Power Supply Cord

AC304

600W

2.8m3/min 0 - 5.5kPa 0 - 16,000 r/min 1.9kg 2.5m

AC304

SPECIFICATIONS

600W

Air Temperature Air Flow Net Weight

DUST COLLECTOR

BRAD NAILERS

M440

AF505

AF600

18 Gauge Pneumatic Brad Nailer

16 Gauge Pneumatic Brad Nailer

F-Type.

T-Type.

Wet & Dry Vacuum Cleaner Can be used in conjunction with power tools up to 2000W. Activated immediately when power tool is turned on.

SPECIFICATIONS Max. Peak Air Flow Max. Sealed Suction Max. Power Tool Wattage Recoverable Capacity Dust Water Net Weight

3.0 m3/min 21.5 kPa 2,000W

Nail Size Gauge Capacity Operating Air Pressure Net Weight

Supplied with : 2 flexible hoses, extension tubes, corner nozzle, crevice nozzle brushes for floors, brushes for liquids.

CIRCULAR SAWS SP6000J

165mm Plunge Cut Circular Saw

High accuracy clean cutting. Supplied with: 1.4m rail and 2 x clamps.

1,000W

• Splinter-free Cutting. • Connectable to Vacuum Cleaner.

165mm 20mm 56mm 40mm 38mm 2,000-5,800 r/min 4.4kg 2.5m

AC304

1,300W

with TCT blade

Low noise and vibration sawing for operator comfort.

Blade Diameter Bore Size Max. Cutting Capacity At 0° At 45° No Load Speed Net Weight Power Supply Cord

190mm 30mm 66mm 46mm 4,900 r/min 4.9kg 2.5m

AC304

1,200W

WOOD CUTTING 5903RK 235mm

with TCT blade

with TCT blade For all-round easier operation.

A hardworking saw with the power to rip through most materials.

SPECIFICATIONS

20mm-64mm 16Ga 100pcs 72.6-116 PSI 1.6kg

SPECIFICATIONS

WOOD CUTTING N5900B 235mm

Blade Diameter Bore Size Max. Cutting Capacity At 0° At 45° At 50° No Load Speed Net Weight Power Supply Cord

Capacity Length Gauge Magazine Capacity Operating Air Pressure Net Weight

15mm-50mm 18Ga 100pcs 60 - 115 PSI 1.4kg

WOOD / ALUMINIUM CUTTING WOOD CUTTING Clean Cutting 5704RK 190mm

SPECIFICATIONS Blade Diameter Bore Size Max. Cutting Capacity At 0° At 45° At 48° No Load Speed Net Weight Power Supply Cord

1,800W

SPECIFICATIONS

35L 17L 8.0kg

100°C-550°C 250-500 l/min 0.7kg

SPECIFICATIONS

235mm 30mm 85mm 60mm 53mm 4,100 r/min 7.2kg 2.5m

AC155

2,000W

Blade Diameter Bore Size Max. Cutting Capacity At 0° At 45° No Load Speed Net Weight Power Supply Cord

235mm 30mm 85mm 64mm 4,500 r/min 7.2kg 2.5m

AC204

2,000W

INDUSTRIAL POWER TOOLS CIRCULAR SAWS WOOD CUTTING 5143R 355mm

METAL CUTTING 4131 185mm

with TCT blade

with TCT blade for mild steel

130mm cutting capacity.

“Cold”cutting prevents distortion of material.

SPECIFICATIONS Blade Diameter Bore Size Max. Cutting Capacity At 0° At 45° No Load Speed Net Weight Power Supply Cord

355mm 30mm

SPECIFICATIONS

130mm 90mm 2,700 r/min 14kg 5m

Blade Diameter Bore Size Max. Cutting Capacity No Load Speed Net Weight Power Supply Cord

CB204

2,200W

CUT-OFF SAWS METAL CUTTING 2414EN 355mm

“Cold”cutting for extra safety and virtually burr-free cuts.

SPECIFICATIONS Blade Diameter Bore Size Max. Cutting Capacity At 0°

SPECIFICATIONS 355mm 25.4mm 3,800 r/min 17.6kg 2.5m

At 45°

CB203

MITRE SAWS

2,000W

No Load Speed Net Weight Power Supply Cord

255mm Compound Mitre Saw with TCT wood cutting blade

115mm 75mm x 150mm 90mm 85mm x 85mm 1,300 r/min 19.3kg 2.5m

Double Slide Compound Mitre Saw with TCT wood cutting blade

Clean mitre cutting up to 45°, left or right.

Ergonomically designed rubberized soft grip provides more control comfort.

SPECIFICATIONS

Blade Diameter 255mm - 260mm Bore Size 25.4mm Max. Cutting Capacity with 255mm Blade At 0° 90.5mm x 95mm At 45° 90.5mm x 67mm No Load Speed 4,600 r/min Net Weight 12.4kg Power Supply Cord 2.5m

Blade Diameter 255-260mm Bore Size 30mm Max. Cutting Capacity with 255mm Blade At 0° 91mm x 305mm At 45° 91mm x 215mm No Load Speed 4,300 r/min Net Weight 19.9kg Power Supply Cord 2.5m

AC155

1,650W

305mm

1,750W

Large cutting capacity.

SPECIFICATIONS

AC155

1,430W

Blade Diameter 305mm Bore Size 30mm Max. Cutting Capacity with 305mm Blade At 0° 107mm x 363mm At 45° 107mm x 255mm No Load Speed 3,200 r/min Net Weight 26.6kg AC153 Power Supply Cord 2.5m

TABLE SAW MLT100 255mm

MITRE / TABLE SAW LF1000 260mm Compact fold

AC204

Double Slide Compound Mitre Saw with TCT wood cutting blade

SPECIFICATIONS

Blade Diameter Bore Size Max. Cutting Capacity At 90° Table Mitre At 45° Table Mitre Bevel No Load Speed Net Weight Power Supply Cord

305mm 25.4mm

WOOD / ALUMINIUM CUTTING LS1018L 255mm LS1216L

LS1040

SPECIFICATIONS

1,100W

with TCT blade for mild steel

Complies with new EU standards. Use correctly rated cut-off wheels Makita A-05044.

Flip-Over Saw

AC304

COLD METAL CUTTING LC1230 305mm

with abrasive wheel

Wheel Diameter Hole Diameter No Load Speed Net Weight Power Supply Cord

185mm 30mm 63mm 3,500 r/min 5.1kg 2.5m

1,650W

Provided with sliding left extension sub-table.

Table Saw

away legs allow easy transport to job site.

Optional WST03 Stand for MLT100 Table Saw.

260mm 30mm

SPECIFICATIONS

70mm 68mm x 155mm 32mm 68 x 95mm 50 x 140mm 2,700 r/min 36kg 2.5m

Blade Diameter Bore Size Max. Cutting Capacity At 0° At 45° No Load Speed Net Weight Power Supply Cord Carbon Brush

1,650W

AC155

255mm 30mm 91mm 63mm 4 300 r/min 34.1kg 2.5m JM23000123

1,500W

INDUSTRIAL POWER TOOLS DIAMOND TOOLS WET CUTTING 4107R 180mm Quick and clean without blade

cutting.

DOUBLE BLADE WALL CHASER SG1250

DRY CUTTING 4157KB 180mm

125mm Two Blades Included

Dustless Cutter without blade Large transparent dust collection container.

Clean, compact & comfortable.

SPECIFICATIONS

SPECIFICATIONS SPECIFICATIONS Blade Diameter Max. Cutting Capacity No Load Speed Net Weight Power Supply Cord

180mm 60mm 5,000 r/min 6.6kg 5m

AC155

1,400W

DRY CUTTING 4114S 355mm

Electric Power Cutter without blade Effective alternative to a petrol power cutter.

Blade Diameter Bore Size Max. Cutting Capacity At 0째 At 45째 No Load Speed Net Weight Power Supply Cord

180mm 22.23mm 58mm 29mm 5,800 r/min 5.6kg 4m

CB155

1,400W

CONCRETE PLANER PC5001C 125mm Concrete Planer

Capable of planing flush to corners.

Most suitable for planing concrete.

Blade Diameter Bore Size Cutting Depth Possible Adjustment of Cutting Width No Load Speed Net Weight Power Supply Cord

125mm 22.23mm 0 - 30mm 6 - 30mm 9,000 r/min 4.4kg 5m

AC318

1,400W

DIAMOND CORE DRILLS 8406 13mm Gear Chuck Diamond Core Hammer Drill

Fast drilling in ferro concrete or brick.

SPECIFICATIONS SPECIFICATIONS Blade Diameter Bore Size Max. Cutting Capacity No Load Speed Net Weight Power Supply Cord

355mm 25.4mm 125mm 3,500 r/min 10.8kg 2.5m

SPECIFICATIONS AC204

2,400W

DIE GRINDERS GD0600

6.35mm

Small circumference housing for easy handling.

SPECIFICATIONS Collet Capacity No Load Speed Net weight Power Supply Cord

6.35mm 25,000 r/min 1.7kg 2.5m

CB325

400W

Wheel Diameter No Load Speed Net Weight Power Supply Cord

125mm 10,000 r/min 5.1kg 5m

CB253

1,400W

Drilling Capacities Concrete (with Diamond Core Bit Dry) 152mm (with Diamond Core Bit Wet) 60mm Steel 13mm Wood 30mm No Load Speed 0 - 1,500 r/min Blows per Minute 0 - 22,500 Net Weight 3.7kg Power Supply Cord 2.5m

HIGH SPEED GD0800C 6.35mm

HIGH SPEED GD0810C 6.35mm

High-speed die grinder with maximum 8mm collet capacity.

With high torque, ideal for grinding internal surfaces removing paint etc. using flap wheel discs.

SPECIFICATIONS

Collet Capacity Optional Collet Max. Bit Dia. No Load Speed Net Weight Power Supply Cord

6.35mm (6mm or 8mm) 25mm 7,000 - 28,000 r/min 1.7kg 2.5m

CB318

750W

Collet Capacity Optional Collet Max. Bit Dia. No Load Speed Net Weight Power Supply Cord

6.35mm (6mm or 8mm) 50mm 1,800 - 7,000 r/min 1.7kg 2.5m

CB106

850W

CB318

750W

* Although Die Grinders are portrayed with a wheel point they are sold without wheel points or flapper wheels.

DRILLS - ROTARY (NON HAMMER) DP2010

6.5mm Gear chuck

Compact, yet with high power. Ideal for high speed drilling into thin material.

6411

10mm Gear Chuck

Compact & lightweight yet powerful.

SPECIFICATIONS

SPECIFICATIONS Drilling Capacity Steel Wood No Load Speed Net Weight Power Supply Cord

Model: DP2010

6.5mm 15mm 0 - 4,200 r/min 1.0kg 2m

CB419

370W

Drilling Capacity Steel Wood No Load Speed Net Weight Power Supply Cord

10mm 25mm 3,400 r/min 1.3kg 2m

CB63

450W

INDUSTRIAL POWER TOOLS DRILLS - ROTARY (NON HAMMER) DA3010F

6300-4

10mm Gear Chuck

Ideal for close quarter drilling 66mm head height.

13mm Gear Chuck

4-speed (650 / 700/ 1,250 / 1,500 r/min) drilling for a variety of materials.

Model: DA3010F

SPECIFICATIONS SPECIFICATIONS Drilling Capacity Steel Wood No Load Speed Net Weight Power Supply Cord

DP4002

10mm 25mm 0 - 2,400 r/min 1.6kg 2.5m

Drilling Capacity Steel Wood No Load Speed

CB419

Net Weight Power Supply Cord

450W

DS4011

13mm Gear Chuck

13mm 30mm 650 / 700 / 1,250 / 1,500 r/min 2.9kg 2.5m

AC60

650W

DA4031 13mm Gear Chuck new

13mm Gear Chuck

Extra powerful motor provides the highest torque in its class.

Full 360째 rotatable D-handle.

Angle drill with rear handle that swivels 90 degrees right and left by one push of a button to drill in any position.

SPECIFICATIONS

Drilling Capacity Steel Wood No Load Speed Net Weight Power Supply Cord

13mm 38mm 0 - 600r/min 2.7kg 2.5m

CB419

750W

13mm 36mm 600r/min 2.8kg 2.5m

CB411

750W

Drilling Capacity Steel Wood (auger bit) Wood (self-feed bit) No Load Speed (r/min) Net Weight Power Supply Cord

IMPACT DRILLS (WITH HAMMER ACTION) HP1230 10mm Gear Chuck

HP1640

High quality aluminium gear housing provides toughness.

Dual purpose for "rotation only" or "rotation with hammering."

High power motor.

SPECIFICATIONS

Drilling Capacities Concrete Steel Wood No Load Speed Impacts per Minute Net Weight Power Supply Cord

SPECIFICATIONS

HP2050

12mm 10mm 15mm 0 - 2,900 r/min 0 - 31,900 1.6kg 2m

CB419

400W

13mm Gear Chuck

16mm 13mm 30mm 0 - 2,800 r/min 0 - 44,800 2.0kg 2m

CB419

680W

Model: HP2070

HP1630

CB303

1,050W

13mm Gear Chuck

Drilling Capacities Concrete Steel Wood No Load Speed Impacts per Minute Net Weight Power Supply Cord

HP2051

13mm 38mm Hi:65mm Lo:118mm Hi:1,200 Lo:300 6.3kg 2.5m

16mm 13mm 30mm 0 - 3,200 r/min 0 - 48,000 2.1kg 2m

CB85

710W

13mm Keyless Chuck

2-Speed, Var & Rev

2-Speed, Var & Rev Compact body with durable metal gear housing.

SPECIFICATIONS

SPECIFICATIONS Drilling Capacities Concrete Steel Wood No Load Speed Impacts per Minute Net Weight Power Supply Cord

20mm Hi : 8mm Lo : 13mm Hi : 25mm Lo : 40mm Hi : 0 - 2,900 r/min Lo: 0-1,200 r/min Hi : 0 - 58,000 Lo : 0 - 24,000 2.5kg 2.5m

Drilling Capacities Concrete Steel Wood No Load Speed CB419

Impacts per Minute

720W

Net Weight Power Supply Cord

20mm Hi: 8mm Lo:13mm Hi: 25mm Lo:40mm Hi: 0 - 2,900 r/min Lo: 0-1,200 r/min Hi: 0 - 58,000 Lo: 0 - 24,000 2.5kg 2.5m

CB419

720W

INDUSTRIAL POWER TOOLS IMPACT DRILLS (WITH HAMMER ACTION) HP2010N

HP2020

13mm Gear Chuck

SPECIFICATIONS Drilling Capacities Concrete Steel Wood No Load Speed Impacts per Minute Net Weight Power supply cord

HP2070

13mm Gear Chuck

Extra Heavy Duty Industrial metal gear housing Extra Heavy Duty 2-Speed Variable Speed R&L for long lasting durability. 2-Speed

SPECIFICATIONS

SPECIFICATIONS Drilling Capacities Concrete Steel Wood No Load Speed

20mm 13mm 40mm Hi: 0 - 2,300 r/min Lo: 0 - 900 r/min Hi: 0 - 46,000 Lo: 0 - 18,000 2.9kg 2.5m

AC113

Impacts per Minute

750W

Net Weight Power Supply Cord

13mm Gear Chuck

Heavy Duty Power in a slender & Variable Speed R&L compact body. 2-Speed

For fast and steady drilling.

20mm 13mm 40mm Hi: 2,300 r/min Lo: 900 r/min Hi: 46,000 Lo: 18,000 3kg 2.5m

Drilling Capacities Concrete Steel Wood No Load Speed AC113

Impacts per Minute

800W

Net Weight Power Supply Cord

20mm Hi: 8mm Lo: 16mm Hi: 25mm Lo: 40mm Hi: 0 - 2,900 r/min Lo: 0 - 1,200 r/min Hi: 0 - 58,000 Lo: 0 - 24,000 2.5kg 2.5m

CB419

1,010W

JIG SAWS & RECIPRO SAWS 4329K

JV0600K

4350FCT

Medium duty model with 450W continuous input.

AC63

450W

SPECIFICATIONS

Length of Stroke 18mm Max. Cutting Capacities In Wood at 90° 65mm In Steel at 90° 6mm Strokes per Minute 500 - 3,100 Net Weight 1.9kg Power Supply Cord 2.0m

SPECIFICATIONS

Length of Stroke 23mm Max. Cutting Capacities In Wood at 90° 90mm In Steel at 90° 10mm Strokes per Minute 500 - 3,100 Net Weight 2.4kg Power Supply Cord 2.5m

Length of Stroke 26mm Max. Cutting Capacities In Wood at 90° 135mm In Steel at 90° 10mm Strokes per Minute 800 - 2,800 Net Weight 2.6kg Power Supply Cord 2.5m

4351FCT

CB419

CB64

650W

SPECIFICATIONS

Length of Stroke 26mm Max. Cutting Capacities In Wood at 90° 135mm In Steel at 90° 10mm Strokes per Minute 800 - 2,800 Net Weight 2.5kg Power Supply Cord 2.5m

Max. Cutting Capacities In Pipe 25.4mm In Wood 55mm Length of Stroke 14mm Strokes per Minute 0 - 4,800 Net Weight 1.6kg Power Supply Cord 2.5m

SPECIFICATIONS Max. Cutting Capacities In Pipe 130mm In Wood 255mm Length of Stroke 32mm Strokes per Minute 0 - 2,800 Net Weight 4.6kg Power Supply Cord 2.5m

CB419

340W

METAL WORKING TOOLS NIBBLERS JN1601

JN3201J

1.6mm Precise, burr-free curved and straight cuts.

AC410

550W

Max. Cutting Capacities Mild Steel up to 400 N/mm2 Stainless Steel up to 600 N/mm2 Aluminium up to 200 N/mm2 Minimum Cutting Radius Outside Edge Inside Edge Strokes per Minute Net Weight Power Supply Cord

3.2mm

Robust design with elastomer coated handle provides easy operation.

SPECIFICATIONS

SPECIFICATIONS 1.6mm 1.2mm 2.5mm 50mm 45mm 2,200 1.6kg 2m

CB303

710W

720W

Extra-low vibration and extra power.

Small and light weight body.

SPECIFICATIONS

CB419

JR3070CT Recipro Saw, Orbital

JR1000FT In-Line Jigsaw

With electronic speed control and speed dial.

720W

Toolless blade change system.

With rigid aluminium support housing.

3.2mm 2.5mm 3.5mm 128mm 120mm 1,300 3.4kg 2.5m

Model: JN3201J

AC304

1,510W

INDUSTRIAL POWER TOOLS METAL WORKING TOOLS SHEARS JS1601

JS1602

1.6mm

CB459

380W

Robust design with elastomer coated handle provides easy operation.

SPECIFICATIONS

SPECIFICATIONS 1.6mm 1.2mm 2.5mm 250mm 4,500 1.4kg 2.5m

3.2mm

Slim motor housing and rear cover provides more control and better maneuverability.

Ingenious aesthetic design provides more control and maneuverability. Max. Cutting Capacities Mild Steel up to 400 N/mm2 2 Stainless Steel up to 600 N/mm Aluminium up to 200 N/mm2 Minimum Cutting Radius Strokes per Minute Net Weight Power Supply Cord

JS3201J

1.6mm

Straight Shear

CB459

380W

Max. Cutting Capacities Mild Steel up to 400 N/mm2 Stainless Steel up to 600 N/mm2 Aluminium up to 200 N/mm2 Minimum Cutting Radius Strokes per Minute Net Weight Power Supply Cord

SPECIFICATIONS 1.6mm 1.2mm 2.5mm 30mm 4,000 1.6kg 2.5m

CB303

710W

Max. Cutting Capacities Mild Steel up to 400 N/mm2 Stainless Steel up to 600 N/mm2 Aluminium up to 200 N/mm2 Minimum Cutting Radius Strokes per Minute Net Weight Power Supply Cord

3.2mm 2.5mm 4.0mm 50mm 1,600 3.4kg 2.5m

MULTI TOOL, ORBITAL & RANDOM SANDERS TM3000CX2

BO4555

Multi Tool

With segment & plunge cutting saw blades, flexible scraper, abrasive paper, sanding pad and dust attachment set.

SPECIFICATIONS Strokes per Minute Net Weight Power Supply Cord

BO4900

CB419

6,000 - 20,000 1.4kg 5m

320W

1/3 Sheet

Ergonomic tool body provides sure grip and easy handling.

SPECIFICATIONS

Pad Size Abrasive Paper Size Orbits per Minute Net Weight Power Supply Cord

9046

1/2 Sheet

BO3710

1/4 Sheet

Powerful motor with low vibration & low noise.

112mm x 102mm 114mm x 140mm 14,000 1.1kg 2m

CB419

200W

Pad Size Abrasive Paper Size Orbits per Minute Net Weight Power Supply Cord

BO5031

1/2 Sheet

92mm x 185mm 93mm x 228mm 11,000 1.6kg 2m

Powerful performance for pro's needs.

Powerful motor and high durability.

SPECIFICATIONS

BO5041

115mm x 229mm 115mm x 232mm 10,000 2.7kg 2.5m

CB419

330W

BO6030

125mm

Ergonomically designed body and rotatable front grip.

SPECIFICATIONS Pad Diameter 123mm Abrasive Disc Diameter 125mm Orbits per Minute 4,000 - 12,000 Net Weight 1.4kg Power Supply Cord 2.0m

Pad Size Abrasive Paper Size Orbits per Minute Net Weight Power Supply Cord

CB64

300W

115mm x 229mm 115mm x 280mm 6,000 3.1kg 2.5m

CB419

600W

Pad Diameter 123mm Abrasive Disc Diameter 125mm Orbits per Minute 4,000 - 12,000 Net Weight 1.3kg Power Supply Cord 2.0m

BO6040

150mm

For stock removal & finishing.

SPECIFICATIONS

Pad Diameter 150mm Abrasive Disc Diameter 150mm Orbits per Minute 4,000 - 10,000 Orbit Diameter 3mm Net Weight 2.4kg Power Supply Cord 2.5m

Pad Diameter Abrasive Disc Diameter Orbits per Minute Orbit Diameter Net Weight Power Supply Cord

310W

CB419

300W

150mm

Exceptionally low vibration, yet aggressive sanding.

CB419

190W

125mm

Minimized vibration for reduced operator fatigue.

Pad Size Abrasive Paper Size Orbits per Minute Net Weight Power Supply Cord

CB64

150mm 150mm 1,600 - 5,800 5.5mm 2.8kg 2.5m

CB318

750W

INDUSTRIAL POWER TOOLS PLANERS & THICKNESSER KP0800K

2012NB

304mm Thicknesser

82mm

New aesthetic design incorporating safety foot.

- Compact and lightweight (28.1kg) for easier transportation. - Unique feeding mechanism assures smoother finish with minimal snipe on stock. - 4-Post design and diagonal cross supports for stability.

Reversible mini TCT blades.

SPECIFICATIONS Planing Width Max Planing Depth No Load Speed Net Weight Power Supply Cord

82mm 2.5mm 17,000r/min 2.6kg 2.5m

KP0810K

82mm

CB411 Rebate

620W 9mm

Lightweight design for easy handling.

Reversible mini TCT blades. SPECIFICATIONS Cutting Width in Pine Cutting Depth in Pine

SPECIFICATIONS Planing Width Max Planing Depth No Load Speed Net Weight Power Supply Cord

82mm 4mm 16,000r/min 3.3kg 2.5m

CB132 Rebate

Feed Rate per Minute Table Size (W x L) No Load Speed Net Weight Power Supply Cord

850W 25mm

304mm 3mm of stock width less than 150mm 1.5mm of stock width from 150mm to 240mm 8.5m 304 x 771mm 8,500r/min 28.1kg 2.5m

CB155

1,650W

ROTARY HAMMERS HR2230

HR2300 23mm

22mm 2.3 Joules

HR2460

2.3 Joules

24mm 2.7 Joules

2 Operation modes

Highly durable mechanical parts, motor and carbon brushes.

Less bit wobbling.

Same speed and torque in forward & reverse rotation.

SPECIFICATIONS - SDS+

Capacities Concrete Steel Wood No Load Speed Blows per Minute Net Weight Power Supply Cord

22mm 13mm 32mm 0 - 1050 r/min 0 - 4,050 2.6kg CB325 2,5m

710W

23mm 13mm 32mm 0 - 1,200 r/min 0 - 4,600 2.7kg CB325 2,5m

HR2470

24mm 2.7 Joules 3 Operation modes

HR2475

One-touch sliding chuck for easy bit change.

Spade handle design for heavy duty applications. Minimizes hand fatigue.

SPECIFICATIONS - SDS+

Capacities Concrete Steel Wood No Load Speed Blows per Minute Net Weight Power Supply Cord

24mm 13mm 32mm 0 - 1,100 r/min 0 - 4,500 2.9kg CB325 2.5m

780W

720W

24mm 2.7 Joules

3 Operation modes

Capacities Concrete Steel Wood No Load Speed Blows per Minute Net Weight Power Supply Cord

24mm 13mm 32mm 0 - 1,100 r/min 0 - 4,500 3.0kg CB419 4m

Capacities Concrete Steel Wood No Load Speed Blows per Minute Net Weight Power Supply Cord

24mm 13mm 32mm 0 - 1,100 r/min 0 - 4,500 2.8kg 2.5m CB325

HR2470T

24mm 2.7 Joules

780W

3 Operation modes

Quick change drill chuck.

SPECIFICATIONS - SDS+

780W

Capacities Concrete Steel Wood No Load Speed Blows per Minute Net Weight Power Supply Cord

24mm 13mm 32mm 0 - 1,100 r/min 0 - 4,500 3.0kg CB325 2.5m

780W

INDUSTRIAL POWER TOOLS ROTARY HAMMERS HR2600 26mm

HR2610

2.4 Joules

3 Operation modes

Operation mode change lever positioned on the bottom of gear housing for reduced possibility of breakage.

Easy-to-grip handle ergonomically designed for maximum power thrust.

SPECIFICATIONS - SDS+

Capacities Concrete Steel Wood No Load Speed Blows per Minute Net Weight Power Supply Cord

26mm 13mm 32mm 0 - 1,200 r/min 0 - 4,600 2.8kg 2.5m CB325

HR3200C

800W

32mm 5.5 Joules

3 Operation modes

HR4002

HR2810

26mm 2.4 Joules

2 Operation modes

Most efficient in its class for both drilling & chipping.

SPECIFICATIONS - SDS+

26mm 13mm 32mm 0 - 1,200 r/min 0 - 4,600 2.8kg 2.5m CB325

800W

40mm 6.2 Joules

2 Operation Modes : Hammering with rotation (for drilling) Hammering only (for chipping & breaking)

Lightweight design featuring low vibration levels.

28mm 2.9 Joules

3 Operation modes

High speed for high work efficiency.

Capacities Concrete (with diamond core bit) 80mm Concrete (with TCT bit) 28mm Steel 13mm Wood 32mm No Load Speed 0 - 1,100 r/min Blows per Minute 0 - 4,500 Net Weight 3.4kg Power Supply Cord 2.5m

800W

CB325

HR4003C

40mm 11.4 Joules

2 Operation Modes : new Hammering with rotation (for drilling) Hammering only (for chipping & breaking)

Most powerful and efficient in the class.

SPECIFICATIONS - SDS+ Capacities Concrete (with TCT bit) Steel Wood No Load Speed Impacts per Minute Net Weight Power Supply Cord

32mm 13mm 32mm 315-630 r/min 1,650-3,300 4.8kg CB350 5m

HR4013C

40mm 11.4 Joules

850W

2 Operation Modes : new Hammering with rotation (for drilling) Hammering only (for chipping & breaking)

SPECIFICATIONS - SDS MAX

Concrete (with TCT bit) No Load Speed Blows per Minute Net Weight Power Supply Cord

HR5211C

40mm 680 r/min 2,500 6.6kg 5m

52mm 19.7 Joules

2 Operation Modes : Hammering with rotation (for drilling) Hammering only (for chipping & breaking)

High performance and low vibration.

SPECIFICATIONS - SDS MAX

40mm 250 - 500 r/min 1,450-2,900 6.8kg 5m

CB350

1,100W

Max. Bit Diameter No Load Speed Blows per Minute Net Weight Power Supply Cord

52mm 130 - 260 r/min 1,075-2,150 12.2kg 5m

CB327

1,100W

SPECIFICATIONS SDS MAX Shank Blows per Minute Net Weight Power Supply Cord

HM1307C

33.8 Joules Demolition Hammer

High durability and excellent demolition performance.

Powerful 1,100W in compact and lightweight (5.1kg) body. CB171

1,100 - 2,650 5.1kg 5m

1,510W

3 Operation Modes : Hammering, hammering with rotation & rotation only.

1,500W

25.5 Joules Demolition Hammer

Light Chipper

2 Operation Modes : Hammering with rotation & rotation only.

CB171

HM1203C

11.4 Joules

1,100W

Model: HR4013C

DEMOLITION HAMMERS

HM0870C

CB350

* Although Rotary Hammers are portrayed with a bit they are all sold without bits.

Soft no load function reduces motor speed during idling to suppress vibration.

Concrete (with TCT bit) No Load Speed Blows per Minute Net Weight Power Supply Cord

1,050W

CB350

40mm 250 - 500 r/min 1,450-2,900 6.2kg 5m

1,510W CB171

SPECIFICATIONS SDS MAX Shank Blows per Minute Net Weight Power Supply Cord

950 - 1,900 9.7kg 5m

* Although Demolition Hammers are portrayed with a bit they are all sold without bits.

Durable, lightweight moulded carry case with wheels.

SPECIFICATION 30mm Hex Shank Blows per Minute Net Weight Power Supply Cord

730 - 1,450 15.3kg 5m

INDUSTRIAL POWER TOOLS BREAKERS

HM1801

63 Joules Electric Breaker (without AVT)

HM1810

63 Joules Electric Breaker (with AVT) Offers lowest vibration and highest demolition efficiency in its class.

Highest-in-class demolition efficiency.

SPECIFICATIONS 28.6mm Hex Shank

Blows per Minute Net Weight Power Supply Cord

Model: HM1801

1,100 29.7kg 5m

2,000W

AC204

1,100 32.3kg 5m

2,000W

* Although Breakers are portrayed with a bit they are all sold without bits.

ROUTERS RP0900

RP1800X

RP2301FCX

Highly durable and well designed.

Ergonomically contoured handles for comfortable operation.

Linear ball bearing for super-smooth plunge action.

6.35mm

12.7mm

SPECIFICATIONS

SPECIFICATIONS CB106

900W

Collet Capacity No Load Speed Plunge Capacity Net Weight Power Supply Cord

12.7mm

6.35mm 27,000 r/min 0-35mm 2.7kg 2.5m

Collet Capacity No Load Speed Plunge Capacity Net Weight Power Supply Cord

CB203

1,850W

12.7mm 22,000 r/min 0-70mm 6.0kg 2.5m

SPECIFICATIONS CB203

2,100W

Collet Capacity No Load Speed Plunge Capacity Net Weight Power Supply Cord

12.7mm 9,000 - 22,000 r/min 0 - 70mm 6.1kg 2.5m

TRIMMERS RT0700C

RT0700CX2

6.35mm

Aluminium housing and base for higher durability and accuracy.

SPECIFICATIONS AC410

710W

Collet Capacity No Load Speed Net Weight Power Supply Cord

6.35mm Includes plunge base, tilt base and trimmer base in a carry bag.

SPECIFICATIONS

6,35mm 10,000 - 30,000 r/min 1.8kg 2.5m

AC410

710W

Collet Capacity No Load Speed Net Weight Power Supply Cord

6,35mm 10,000 - 30,000 r/min 1.8kg 2.5m

POLISHER

SCREWDRIVERS

9227CB

2-Speed For Industrial Roofing Applications

6807

180mm Sander-Polisher

FS2300 DRYWALL For Timber Struts

Electronic speed control for constant speed under load.

SPECIFICATIONS

AC304

Capacities Drywall Screw Self Drilling Screw Driving Shank No Load Speed

1,200W

Net Weight Power Supply Cord

SPECIFICATIONS Maximum Capacities (dia.) Abrasive Disc 180mm Wool Pad 180mm No Load Speed 0 - 3,000 r/min Net Weight 3.1kg Power Supply Cord 2.5m

5mm 8mm 6,35mm hex Hi : 0 - 2,200 r/min Lo : 0 - 1,000 r/min 2kg 2.5m

SPECIFICATIONS CB419

500W

Capacities Drywall Screw Self Drilling Screw Driving Shank No Load Speed Net Weight Power Supply Cord

5mm 6mm 6,35mm hex 0 - 2,500 r/min 1.6kg 2.5m

CB419

570W

INDUSTRIAL POWER TOOLS Feature “Sure Lock”adjustable depth locator for easy and consistent screw depth setting.

SCREWDRIVERS FS4300 DRYWALL

FS6300 DRYWALL

For Aluminium Struts

For Steel Struts

SPECIFICATIONS Capacities Drywall Screw Self Drilling Screw Driving Shank No Load Speed Net Weight Power Supply Cord

SPECIFICATIONS 5mm 6,mm 6,35mm hex 0 - 4,000 r/min 1.4kg 2.5m

CB419

570W

FS2500

Capacities Drywall Screw Driving Shank No Load Speed Net Weight Power Supply Cord

4mm 6,35mm hex 0 - 6,000 r/min 1.4kg 2.5m

CB419

570W Model: FS2500

FS2700

Model: FS2700

Teks and Roofing

Combination (Clutch Type)

One touch locator.

6 -Stage torque adjustment.

Capacities Drywall Screw Self Drilling Screw Driving Shank No Load Speed Net Weight Power Supply Cord

5mm 6mm 6,35mm hex 0 - 2,500 r/min 1.5kg 2.5m

Capacities Hex Screw Drywall Screw Self Drilling Screw No Load Speed Net Weight Power Supply Cord

CB419

570W

IMPACT WRENCHES TW0350 350Nm TW0200

12.7mm

Aluminium hammer case with high durability.

SPECIFICATIONS

6906

CB419

570W

12.7mm

SPECIFICATIONS M10-M16 M10-M12 12.7mm 0 - 2,200 0- 2,200 r/min 200Nm 2.2kg 2.5m

CB410

380W

Capacities Standard Bolt High Tensile Bolt Square Drive Impacts per Minute No Load Speed Max. Fastening Torque Net Weight Power Supply Cord

M12-M22 M12-M16 12.7mm 2,000 2,000 r/min 350Nm 3.0kg 2.5m

CB410

400W

Model: TW0350

TW1000

19mm

25.4mm

1000Nm

588Nm

Robust high torque impact wrench for heavy-duty applications.

Powerful torque for super duty applications.

SPECIFICATIONS Capacities Standard Bolt High Tensile Bolt Square Drive Impacts per Minute No Load Speed Max. Fastening Torque Net Weight Power Supply Cord

6mm 6mm 6mm 0 - 2,500 r/min 1.8kg 2.5m

Incredibly high torque of 350Nm.

200Nm

Capacities Standard Bolt High Tensile Bolt Square Drive Impacts per Minute No Load Speed Max Fastening Torque Net Weight Power Supply Cord

SPECIFICATIONS

SPECIFICATIONS M16-M22 M16-M20 19mm 1,600 1,700 r/min 588Nm 5.6kg 2.5m

AC105

850W

Model: TW1000

Capacities Standard Bolt High Tensile Bolt Square Drive Impacts per Minute No Load Speed Net Weight Power Supply Cord

M24-M30 M22-M24 25.4mm 1,500 1,400 r/min 8.6kg 2.5m

CB155

1,200W

OUTDOOR POWER EQUIPMENT CHAIN SAWS EA3502S

Model: EA3502S

400mm 35mL Petrol Chain Saw

EA4301F

450mm 42.4mL Petrol Chain Saw

Premium hobby class chain saw for tough semiprofessional use.

Farmer class chain saw for tough semiprofessional use.

SPECIFICATIONS

Standard Guide Bar 400mm Chain Blade Pitch: 0.3/8" Gauge:0.058" Displacement 35mL Engine Power 1.7kW Fuel Mixture 50:1 Fuel Tank 0.4L Chain Oil Tank 0.29L Power Head Weight 4.4kg

35cc

UC4020A 400mm Electric Chain Saw

UC4030A 400mm Electric Chain Saw

Hobby class, easy operation and maintenance.

Pro class, excellent in heavy duty application.

Chain Speed per Minute Guide Bar Length Chain Blade Pitch: Gauge: Net Weight: Power Supply Cord

DUC302Z 300mm new Cordless Chain Saw

New adjustment lever for easier tool-less chain adjustment.

Battery capacity warning lamp.

SPECIFICATIONS

SPECIFICATIONS 800m 400mm 3/8" 0.043 / 0.050" 4.4kg 0.3m

CB132

220V

1,800W

Chain Speed per Minute Guide Bar Length Chain Blade Pitch: Gauge: Chain Oil Tank Net Weight Power Supply Cord

800m 400mm CB153

3/8" 0.050" 0.14L 5.2kg 0.3m

220V

1,800W

SPECIFICATIONS Chain Speed Cutting Length Chain Pitch Net Weight

Li-Ion

RBC2110 21mL

Model: DUH523Z

36V

Heavy duty and robust ideal for professional brush-cutting.

SPECIFICATIONS 21mL 0.62kW / 0.84PS 25:1 0.4L M8 x 1.25LH 3.6kg

CB442

Petrol Brush Cutter

Lightweight and comfortable string trimmer for do-it-yourselfers.

Displacement Engine Power Fuel Mixture Fuel Tank Spindle Size Net Weight

500m/min 300mm 3/8” or 1/4” 4.1kg Ah 5.0 4.0 3.0 1.5

RBC411 40.2mL

Model: RBC411

Petrol Brush Cutter

42.4cc

SPECIFICATIONS Displacement Engine Power Fuel Mixture Fuel Tank Spindle Size Net Weight

21cc

40.2mL 1.40kW / 1.9PS 25:1 1.1L M10 x 1.25LH 7.3kg

40.2cc

DUH523Z

Cordless Hedge Trimmer Rubberized soft grip provides comfortable and sure grip.

SPECIFICATIONS User-replaceable blade.

Blade Length 520mm Strokes per min (s/min) 1,350 Net Weight 3.1kg Li-Ion Ah 5.0 4.0 3.0 1.5 1.3

18V

PROFESSIONAL POWER TOOLS

SIMPLE SOLID POWER Cordless Impact Driver Drill

Angle Grinders

MT080E

MT962

10mm

14.4V lithium-Ion battery & charging system.

SPECIFICATIONS Capacity Steel Wood Masonry No Load Speed

10mm 25mm 10mm Hi : 0-1,400 r/min Lo : 0-400r/min Impacts per Minute Hi : 0 - 21,000 Lo : 0 - 6,000 Maximum Torque Hard : 30Nm Soft : 14Nm Net Weight 1.5kg

SPECIFICATIONS

MT957

14.4V

Ah 1.1

MT903

125mm

Anti-dust, heavy-duty motor.

SPECIFICATIONS

SPECIFICATIONS 125mm 125mm 125mm 11,000 r/min 2.1kg 2.0m

CB411

710W

115mm 115mm 115mm 11,000 r/min 2.0kg 2.0m

CB411

570W

Belt Sander

230mm

Conveniently located slide switch.

Max. Capacities (dia.) Depressed Centre Wheel Abrasive Disc Diamond Wheel No Load Speed Net Weight Power Supply Cord

Supplied with: Impact Driver Drill, Charger & 2 x 14.4V 1.1Ah Li-Ion batteries.

Li-Ion

115mm

High performance and durability.

MT940

100mm

Design allows for flush sanding to walls.

Max. Capacities (dia.) Depressed Centre Wheel Abrasive Disc Diamond Wheel No Load Speed Net Weight Power Supply Cord

High performance and durability. 230mm 230mm 230mm 6,600 r/min 5.7kg 2.0m

CB204

2,000W

SPECIFICATIONS Belt Size Belt Speed Net Weight Power Supply Cord

100 x 610mm 380m/min 6.4kg 2.0m

CB153

940W

* Although Angle Grinders are portrayed with a grinding disc, Angle Grinders are sold without grinding discs.

Blower

Circular Saw

Diamond Cutter

MT401

MT582

MT412

In-line ergonomically designed grip.

Powerful cutting, efficient control.

190mm

125mm Diamond Cutter Powerful dry cutting performance.

SPECIFICATIONS

SPECIFICATIONS Air Volume No Load Speed Net Weight Power Supply Cord

1.2 - 2.9m3/min 8,500 - 16,000 r/min 1.5kg 2.0m

CB85

530W

Blade diameter Bore Size Max. Cutting Capacity At 0째 At 45째 No Load Speed Net Weight Power Supply Cord

SPECIFICATIONS

190mm 30mm 68mm 46mm 4,900r/min 4.0kg 2.0m

CB303

1,050W

Blade Diameter 125mm Bore Size 15mm Max. Cutting Capacity with 125mm dia. Diamond Blade 40mm No Load Speed 12,000 r/min Net Weight 3.0kg Power Supply Cord 2.0m

Cut-Off Saw

Compound Mitre Saw

MT242

MT230 255mm

355mm

1,250W

Economical and durable.

Powerful cutting performance.

SPECIFICATIONS Blade Diameter 255mm Max. Cutting Capacity with 255mm Blade At 0째 75mm x 130mm At 45째 75mm x 90mm

SPECIFICATIONS Blade Diameter Bore Size No Load Speed Net Weight Power Supply Cord

355mm 25.4mm 3,800r/min 17.8kg 3.0m CB203

2,000W

No Load Speed Net Weight Power Supply Cord Carbon Brush

4,200 r/min 14.7kg 2.5m JM2300012

1,500W

PROFESSIONAL POWER TOOLS Rotary Drills MT651 6.5mm High Speed

MT653 6.5mm High Speed new

MT606 10mm Geared Chuck

Economic and durable.

Compact body for superior handling.

Compact and lightweight.

SPECIFICATIONS

Drilling Capacity Steel Wood No Load Speed Net Weight Power Supply Cord

6.5mm 9mm 0 - 4,500r/min 0.9kg 2.0m

CB64

230W

SPECIFICATIONS 6.5mm 9mm 0 - 4,500r/min 0.95kg 2.0m

CB85

230W

Drilling Capacity Steel Wood No Load Speed Net Weight Power Supply Cord

10mm 25mm 0 - 3,000 r/min 1.3kg 2.0m

CB85

450W

Impact Drills MT607 10mm Keyless Chuck Compact, lightweight and powerful.

SPECIFICATIONS Drilling Capacity Steel Wood No Load Speed Net Weight Power Supply Cord

10mm 25mm 0 - 3,000 r/min 1.3kg 2.0m

CB85

450W

MT814 13mm Geared Chuck

MT815 13mm Keyless Chuck

Industrial performance and durability at less expense.

Tool body designed to give maximum power thrust.

SPECIFICATIONS

Drilling Capacities Concrete Steel Wood No Load Speed Impacts per Minute Net Weight Power Supply Cord

16mm 13mm 30mm 0 - 3.200 r/min 0 - 48,000 2.1kg 2m

CB85

710W

Drilling Capacities Concrete Steel Wood No Load Speed Impacts per Minute Net Weight Power Supply Cord

16mm 13mm 30mm 0 - 3,200 r/min 0 - 48,000 2.0kg 2m

CB85

710W

Jig Saws and Recipro Saw MT430

MT431

Rigid cylindrical housing.

Powerful and Lightweight.

SPECIFICATIONS

CB64

450W

M 65mm 6mm 18mm 0-3,100 1.9kg 2.0m

Orbital & Random Sanders MT920

1/4 Sheet

Capacity In Wood at 0 Degrees : In Steel at 0 Degrees : Length of Stroke Strokes per Minute Net Weight Power Supply Cord

CB411

450W

MT923

Dust-proof and drip-proof design.

SPECIFICATIONS

Capacity In Wood at 0 Degrees : In Steel at 0 Degrees : Length of Stroke Strokes per Minute Net Weight Power Supply Sord

new

MT450TK

55mm 6mm 26mm 0-3,100 2.5kg 2.0m

Capacity Pipe : Wood : Length of Stroke Strokes per Minute Net Weight Power Supply Cord

MT924

1/3 Sheet

130mm 255mm 28mm 0-2,800 3.2kg 2.0m

CB303

1,010W

125mm

Ergonomic tool body fits userâ&#x20AC;&#x2122;s hand perfectly.

Industrial performance and durability.

SPECIFICATIONS

Extremely versatile sander.

SPECIFICATIONS Pad Size Abrasive Paper Size Orbits per Minute Net Weight Power Supply Cord

112mm x 102mm 114mm x 140mm 14,000 0.9kg 2.0m

CB419

180W

Pad Size Abrasive Paper Size Orbits per Minute Net Weight Power Supply Cord

93mm x 185mm 93mm x 228mm 12,000 1.4kg 2.0m

CB64

190W

Pad Diameter 123mm Abrasive Disc Diameter 125mm Orbits per Minute 12,000 Net Weight 1.2kg Power Supply Cord 2.0m

CB419

240W

PROFESSIONAL POWER TOOLS Rotary Hammer

Planers

MT870

MT191

13mm

2-Operation Modes - Rotation only & rotation with hammering.

SPECIFICATIONS SDS+ Capacities Concrete (with TCT Bit) (with Diamond Core) Steel Wood No Load Speed Impacts per Minute Net Weight Power Supply Cord

22mm 65mm 13mm 32mm 0-1,100 r/min 0 - 4,350 2.5kg 5m

Not Supplied with drill bit.

MT111

82mm

Field-proven, reliable performance from handy and lightweight body.

Reversible mini TCT blades.

Reversible mini TCT blades. SPECIFICATIONS

SPECIFICATIONS CB459

710W

Planing Width Max Planing Depth No Load Speed Net Weight Power Supply Cord

82mm 2mm 16,000 r/min 2.7kg 2.0m

500W

82mm 3mm 18,000 r/min 4.6kg 2.0m

CB303

750W

Trimmer MT360

6.35mm

MT372

12.7mm

Heavy-duty routing with powerful motor.

Industrial performance and durability.

6.35mm

Transparent base for clear view of trimming area and sight line.

SPECIFICATIONS

SPECIFICATIONS Collet Capacity Plunge Capacity No Load Speed Net Weight Power Supply Cord

Planing Width Max Planing Depth No Load Speed Net Weight Power Supply Cord

CB411

Routers MT361

82mm Long Base

High planing capacity.

6.35mm 0 - 35mm 27,000 r/min 2.7kg 2.0m

Metal Extreme Technology

CB106

900W

Collet Capacity Plunge Capacity No Load Speed Net Weight Power Supply Cord

12.7mm 0 - 60mm 22,000r/min 5.4kg 2.0m

SPECIFICATIONS CB203

1,650W

Collet Capacity No Load Speed Net Weight Power Supply Cord

CB411

530W

Extreme Protection Technology

Deep and Exact Cutting Technology

Anti Vibration Technology

6.35mm 35,000 r/min 1.4kg 2.0m

Super Joint System

Chain Brake

Hex Shank

Rapid Start

Super Joint System II

Constant Speed

Hook & Loop

Reversing

Anti Vibration

Decompression Valve

Jig Saw Blade - Bayonet shank

SDS-plus

Automatic Oiling

Depth Adjusting

Keyless Chuck

SDS-max

Brake

Double Insulation

Jig Saw Blade - Makita shank

Single / Sequential Firing

Bevel Cutting

Dust Collecting

Laser Marker

Soft Start

Bevel Cutting L45 R5

Capacitor Discharge Ignition

Mechanical 2-Speed

Stepless Torque Setting

Bevel Cutting 45 LR

Electronic 2-Speed

Mechanical 3-Speed

Built-in Light

Electronic 3-Speed

Orbital Cutting

Torque Limiter

Carrying Case

Electronic speed control

Primer Pump

Variable Speed

Torque Setting

DEALER STAMP

FOR WHOLESALE TRADE ENQUIRIES ONLY CAPE TOWN Tel : (021) 932-0568 Fax : (021) 932-2762

DURBAN Tel : (031) 717-6400 Fax : (031) 709-1928

JOHANNESBURG Tel : (011) 878-2600 Fax : (011) 873-5010

www.makita.co.za & www.maktec.co.za

http://www.facebook.com/MakitaPowerToolsSA

GUARANTEE: These machines have been thoroughly inspected and tested before leaving the factory and are guaranteed against defective workmanship and materials. Should any problems develop the complete machine must be returned to an Authorised Makita Service Centre. This guarantee does not apply where repairs have been made or attempted to be made to the machine by unauthorized persons and/or as a result of normal wear and tear, and/or if the machine has been abused or used for any purpose other than its intended specified use having regard to the capacity thereof. Nothing contained in this guarantee shall deprive the manufacturer and/or supplier on the one hand, and the consumer or customer on the other hand, of any rights or obligations they may have under and in terms of the Consumer Protection Act 68 of 2008 and any Regulations and amendments pertaining thereto from time to time ("the Act"), insofar as the Act may be applicable to the manufacture, sale and/or supply and purchase of the machine. Please note: Manufacturer reserves the right to change specifications of parts and accessories without notice. Standard equipment and specifications of parts may vary in accordance with specifications issued by various countries. This catalogue replaces the Makita Power Tool Catalogue dated June 2014 and all previous Makita Power Tool Catalogues. Rutherford is not responsible for printing errors (E&OE) Theta Graphics and Print Tel: (011) 608-2880