59 by Huws Gray Ltd

DYNAMIC TWO Twin Wall Insulated Flue -

Specially designed for wood, solid fuel and condensing appliances Uses the “click-clack” twist lock system, providing extra strength in the joints Works under positive (gasket required) and negative pressure conditions Designed to work up to a maximum working temperature of 600° Can be used for condensing applications (gaskets required)

Approvals HETAS

The official body of solid fuel domestic heating appliances, fuels and services

Pressure Level (N,P or h)

Condensate resistance (W: Wet or d: Dry)

Corrosion Resistance (Durability)

Flue Liner material specification

EN1856-1

T200

L50050

O30

EN1856-1

T600

L50050

G50

Design & Specification Working Temperature Max 200° with silicon gasket. P1-200pa Max 600° without gasket. N1-40pa Fuels- Gas, Oil, Wood, Coal. MaterialsInner wall- Inox Stainless steel AISI 316L Outer wall- Inox Stainless steel AISI 304BA Both the inner and outer wall are 0.5mm thick. Insulation- 25mm of Rockwool insulation. The Rockwool is inserted between the two walls through an automatic process to always guarantee a minimum density of 180kg/m3. The closing rings are placed at both ends to secure the insulation and leave a clean neat finish on the components.

Component Diameters Dia (mm) Inner Dia Outer Dia

External Wall Is Inox Stainless Steel AISI 304 Gasket Seal

Sootfire resistance (G: yes or o:no) & Distance to combustible material (mm)

Temperature Level

Product designation

Standard Number

EN 1856-1 : 2003 NO. 0063-CPD-52976

Uses a ‘twist-lock’ system to provide extra strength and stability within the joints of the pipe

80 100 125 150 175 200 250 300 350 80 100 125 150 175 200 250 300 350 130 150 180 200 225 250 300 350 350

High Density, 25mm Thick Mineral Wool

Internal Wall Is Inox Stainless Steel AISI 316

Adaptors Products (DDD = Chosen Diameter) Adaptor To SW (Vitreous) Used to start the change from Vitreous enamel to Dynamic Two

Part No. 40-DDD-001 80Ø 100Ø 130Ø 150Ø 180Ø 200Ø 250Ø

Increasing Adaptor To SW (Vitreous) Adapts from Single Wall to Dynamic Two with an Increase in diameter

Part No. 40-DDD-002 80Ø 100Ø 130Ø 150Ø 180Ø 200Ø

Draught Regulator

Helps to regulate draught within the chimney

Part No. 40-DDD-006 80Ø 100Ø 130Ø 150Ø 180Ø 200Ø 250Ø

Straight Lengths 1000mm Pipe Length A 1000mm fixed straight length

Elbows & Tees (Continued) Tee Cap c/w Drain Part No. 40-DDD-037

Part No. 40-DDD-010

80Ø 100Ø 130Ø 150Ø 180Ø 200Ø 250Ø

500mm Pipe Length

Female Condensate Plug Part No. 40-DDD-038

80Ø 100Ø 130Ø 150Ø 180Ø 200Ø 250Ø

A 500mm fixed straight length

Part No. 40-DDD-011 80Ø 100Ø 130Ø 150Ø 180Ø 200Ø 250Ø

2500mm Pipe Length

A 250mm fixed straight length

80Ø 100Ø 130Ø 150Ø 180Ø 200Ø 250Ø

Inspection Plug Part No. 40-DDD-040 80Ø 100Ø 130Ø 150Ø 180Ø 200Ø 250Ø

Part No. 40-DDD-012 80Ø 100Ø 130Ø 150Ø 180Ø 200Ø 250Ø

Support Items

Adjustable Pipe Length

Locking Bands

A straight length which adjusts from 300mm through to 430mm

Part No. 40-DDD-050

Part No. 40-DDD-015 80Ø 100Ø 130Ø 150Ø 180Ø 200Ø 250Ø

Helps to secure two adjoining pipes.

80Ø 100Ø 130Ø 150Ø 180Ø 200Ø 250Ø

Wall Band Used to secure the pipework to the wall

Elbows & Tees 90° Elbow Part No. 40-DDD-030 80Ø 100Ø 130Ø 150Ø 180Ø 200Ø 250Ø

45° Elbow Part No. 40-DDD-031 80Ø 100Ø 130Ø 150Ø 180Ø 200Ø 250Ø

30° Elbow Part No. 40-DDD-032 80Ø 100Ø 130Ø 150Ø 180Ø 200Ø 250Ø

90° Tee Part No. 40-DDD-035 80Ø 100Ø 130Ø 150Ø 180Ø 200Ø 250Ø

135° Tee Part No. 40-DDD-034 80Ø 100Ø 130Ø 150Ø 180Ø 200Ø 250Ø

Reducing Tee

Part No. 40-DDD-051 80Ø 100Ø 130Ø 150Ø 180Ø 200Ø 250Ø

Wall Band Extension Extends the length of the wall band by a maximum of 200mm

Part No. 40-DDD-052 80Ø 100Ø 130Ø 150Ø 180Ø 200Ø 250Ø

Plate With Straight Element Part No. 40-DDD-060 80Ø 100Ø 130Ø 150Ø 180Ø 200Ø 250Ø

Wall Support Part No. 40-DDD-061 80Ø 100Ø 130Ø 150Ø 180Ø 200Ø 250Ø

Roof Support Part No. 40-DDD-067 80Ø 100Ø 130Ø 150Ø 180Ø 200Ø 250Ø

Joist Support Part No. 40-DDD-068

90 ° Tee where the branch is one diameter smaller

80Ø 100Ø 130Ø 150Ø 180Ø 200Ø 250Ø

Guy Wire Bracket Part No. 40-DDD-069

Part No. 40-DDD-036

80Ø 100Ø 130Ø 150Ø 180Ø 200Ø 250Ø

Flashings Flat Flashing Aluminium flashing to be used on flat roofs.

Part No. 40-DDD-080

Terminals Raincap Part No. 40-DDD-090

80Ø 100Ø 130Ø 150Ø 180Ø 200Ø 250Ø

10-35 Flashing

Anti Wind Cowl Part No. 40-DDD-091

Aluminium flashing to be used on roofs with a 10-35 pitch

Part No. 40-DDD-081 80Ø 100Ø 130Ø 150Ø 180Ø 200Ø 250Ø

Storm Collar Part No. 40-DDD-082 80Ø 100Ø 130Ø 150Ø 180Ø 200Ø 250Ø

Residential Flashing - EPDM Part No. 12-101RES 80Ø 100Ø

80Ø 100Ø 130Ø 150Ø 180Ø 200Ø 250Ø

Gas Cowl Part No. 40-DDD-092 80Ø 100Ø 130Ø 150Ø 180Ø 200Ø 250Ø

Cone Top Cowl Part No. 40-DDD-093 80Ø 100Ø 130Ø 150Ø 180Ø 200Ø 250Ø

Part No. 12-201RES 130Ø 150Ø 180Ø

Part No. 12-301RES 200Ø 250Ø

Residential Flashing - High Temperature Part No. 12-101RESHT 80Ø 100Ø

Part No. 12-201RESHT

Firestops Firestop Plate Part No. 40-DDD-070 80Ø 100Ø 130Ø 150Ø 180Ø 200Ø 250Ø

130Ø 150Ø 180Ø

Part No. 12-301RESHT 200Ø 250Ø

EPDM Masterflash (High Temperature) Part No. 12-401 (12-402)

Ventilated Firestop Plate Part No. 40-DDD-071 80Ø 100Ø 130Ø 150Ø 180Ø 200Ø 250Ø

80Ø 100Ø

Part No. 12-501 (12-502) 100Ø 130Ø

Part No. 12-601 (12-602)

Accessories

80Ø 100Ø 150Ø 180Ø

Part No. 12-701 (12-702) 80Ø 100Ø 150Ø 180Ø 200Ø

Part No. 12-801 (12-802) 100Ø 150Ø 180Ø 200Ø 250Ø

Standard Fixing Kit

ONE kit is required for No.3, No.4, No.5 and No.6, TWO kits required for No.7 and No.8.

Part No. 12-SK1

Finishing Plate 0-30 Part No. 40-DDD-096 80Ø 100Ø 130Ø 150Ø 180Ø 200Ø 250Ø

Finishing Plate 30-45 Part No. 40-DDD-097 80Ø 100Ø 130Ø 150Ø 180Ø 200Ø 250Ø

Wall Sleeve Part No. 40-DDD-098 80Ø 100Ø 130Ø 150Ø 180Ø 200Ø 250Ø

Dimensions & Offsets 45°

90°

100 130 328

x y

125 351 399 y

150 145 365

45°

150 369 417

180 154 386

180 399 447

200 159 399

200 419 467

100 210 93

90°

150 315 243 y

180 348 108 200 380 113

100 105 187 y

125 295 225

150 296 103

45°

100 265 193

125 256 100 y

100 318 366

125 141 355

180 345 273 200 365 293

90°

100 190 251 125 205 283

125 128 201 y

150 148 206

150 215 301

X 100 125 150 180 200

180 174 216

180 230 331

Y 150 175 200 230 250

200 190 226

200 240 351

Typical Installations Internal House

External House Locking Band Raincap Length

Raincap

Storm Collar Wall Support 45 Bend Adjustable Length 45 Bend

Roof Flashing Roof Support Enclosure 60mm (wire mesh)

Wall Support CO Alarm

Ventilated Firestop

Locking Band

First floor enclosed by 60mm

Joist Support Wall Sleeve Vitreous Enamel

135 Tee Tee Cap Finishing Plate Chimney Notice Plate

Ventilated Firestop Adaptor To SW Chimney Notice Plate

CO Alarm