GROWTENTS

WHITE

The superior detail and quality that you can expect from LightHouse tents, optimised for LED. The LightHouse WHITE is lined with a highly reflective white inner lining, chosen specifically to ensure a homogenous diffusion of light from LEDs. Compared to conventional silver lining, this lining enables a more even light from different colour chips and helps with consistent canopy penetration. • Highly reflective white inner lining chosen specifically to get the best out of LED growlights • Quality Tivax double lined zips offer snag-free usage and excellent light-proofing • Frame: 25 mm steel poles with welded metal corners – gives ultimate strength and durability • All outlets for air and cables are double lined and light-tight with pull toggles on each lining • All larger air out socks benefit from outer attachable hook & loop covers to stop light when not in use • Roof poles with rubber ends for strong grip • Waterproof insert tray(s) • Hook & loop handy straps for securing cables and wires • Door clips on all doors for fastening when open • Supplied in strong fabric carry bags

Double lined qualityTivax zips that are easy to use and offer good light proofing with no snagging

Highly reflective white inner lining chosen specifically to get the best out of LED growlights

Passive vents with anti-mite fine mesh and light-proof cover offering uniform distribution of air flow

All apertures feature draw strings and are double lined for light proofing. Larger apertures also benefit from an outer light proof cover when not in use

Steel welded corners with spring lock system

Base trays made from single waterproof sheet and wipe clean finish

LightHouse WHITE 1.2 m2

Includes • 1 x base side inlet with a 300 mm (12”) ducting gland • 2 x inline 300 mm (12”) socks for use with air-cooled lighting • 2 x 100 mm (4”) cable glands • 3 x low level passive air vents • 2 x side doors for easy access to crop • 1 x one piece waterproof insert tray • 4 x filter straps • 2 options on extraction, through the roof or side

Recommended minimum extraction fan size of 125 mm (5”).

NOTE: This tent will hold a fan inside the 300 mm socks. Fits most growing systems and is ideal for the PLANT!T aeros IV Master System or GoGro Tray Modules.

LightHouse WHITE 1.5 m2

Includes • 1 x base side inlet with a 300 mm (12”) ducting gland • 2 x inline 300 mm (12”) socks for use with air-cooled lighting • 2 x 100 mm (4”) cable glands • 3 x low level passive air vents • 2 x side doors for easy access to crop • 1 x one piece waterproof insert tray • 4 x filter straps • 2 options on extraction, through the roof or side

Recommended minimum extraction fan size of 125 mm (5”).

NOTE: This tent will hold a fan inside the 300 mm socks. Fits most growing systems and is ideal for the PLANT!T aeros IV Master System or GoGro Tray Modules.

LightHouse WHITE 2.4 m

Includes • 1 x base side inlet with a 300 mm (12”) ducting gland • 2 x inline 300 mm (12”) socks for use with air-cooled lighting • 3 x 100 mm (4”) cable glands • 4 x low level passive air vents • 2 x side doors plus large rear door for easy access to crop • 1 x one piece waterproof insert tray • 4 x filter straps • 2 options on extraction, through the roof or side

Recommended minimum extraction fan size of 150 mm (6”).

NOTE: This tent will hold a fan inside the 300 mm socks. If full access to crop is required, the entire front can be zipped off.

15-500-525 LightHouse WHITE 1.2 m2 (1.2 x 1.2 x 2 m) 15-500-535 LightHouse WHITE 1.5 m² (1.5 x 1.5 x 2 m) 15-500-530 LightHouse WHITE 2.4 m (2.4 x 1.2 x 2 m)

LightHouse WHITE 2 m2

Includes • 1 x base side inlet with a 300 mm (12”) ducting gland • 4 x inline 300 mm (12”) socks for use with air-cooled lighting • 4 x 100 mm (4”) cable glands • 6 x low level passive air vents • 2 x side doors plus large rear door for easy access to crop • 2 x one piece waterproof insert tray • 8 x filter straps • 4 options on extraction, through the roof or side

Recommended minimum extraction fan size of 150 mm (6”).

NOTE: This tent will hold a fan inside the 300 mm socks. If full access to crop is required,the entire front can be zipped off.

SUPPLIED IN TWO BOXES SUPPLIED IN TWO BOXES SUPPLIED IN TWO BOXES

15-500-540 LightHouse WHITE 2 m² (1.95 x 1.95 x 1.95 m)

LightHouse WHITE 2.4 m2

Includes • 1 x base side inlet with a 300 mm (12”) ducting gland • 4 x inline 300 mm (12”) socks for use with air-cooled lighting • 4 x 100 mm (4”) cable glands • 6 x low level passive air vents • 2 x side doors plus large rear door for easy access to crop • 2 x one piece waterproof insert tray • 8 x filter straps • 4 options on extraction, through the roof or side

Recommended minimum extraction fan size of 150 mm (6”).

NOTE: This tent will hold a fan inside the 300 mm socks If full access to crop is required,the entire front can be zipped off.

15-500-545 LightHouse WHITE 2.4 m2 (2.4 x 2.4 x 2 m)

LightHouse WHITE 3 m

Includes • 1 x base side inlet with a 300 mm (12”) ducting gland • 4 x inline 300 mm (12”) socks for use with air-cooled lighting • 4 x 100 mm (4”) cable glands • 6 x low level passive air vents • 2 x side doors plus large rear door for easy access to crop • 2 x one piece waterproof insert tray • 8 x filter straps • 4 options on extraction, through the roof or side

Recommended minimum extraction fan size of 150 mm (6”).

NOTE: This tent will hold a fan inside the 300 mm socks. If full access to crop is required,the entire front can be zipped off.

15-500-550 LightHouse WHITE 3 m (3 x 2 x 2 m)

LightHouse WHITE 3 m2

Includes • 1 x base side inlet with a 300 mm (12”) ducting gland • 4 x inline 300 mm (12”) socks for use with air-cooled lighting • 4 x 100 mm (4”) cable glands • 6 x low level passive air vents • 2 x side doors plus large rear door for easy access to crop • 2 x one piece waterproof insert tray • 8 x filter straps • 4 options on extraction, through the roof or side

Recommended minimum extraction fan size of 200 mm (8”).

NOTE: This tent will hold a fan inside the 300 mm socks. If full access to crop is required,the entire front can be zipped off.

LightHouse HYDROSTIK

An adhesive ideal for installing reflective wall sheeting as well as many other materials such as carpets & carpet tiles, felt, textiles, fabrics. • Ideal for fitting reflective wall sheeting • Overspray can be removed with a solvent cleaner • Apply adhesive to both surfaces for a stronger bond

SUPPLIED IN TWO BOXES

15-500-555 LightHouse WHITE 3 m² (3 x 3 x 2 m) 14-675-050 LightHouse HYDROSTIK - 500 ml

Visqueen Black White MF Sheeting

Visqueen Black White Sheeting is ideal for floor and wall covering due to its strength and tear resistance. The white coating helps to reflect light in a grow area whilst the black side will block out any external light. • Highly reflective white coating • Resistant to tearing and weathering • Excellent opacity • British made

Technical Specifications Dimensions: 8 x 25 m Thickness: 120 micron

14-650-150 Visqueen Black White MF Sheeting 8 m x 25 m