Do I have to use a vacuform carrier?

Carrier for 3D Click Guide ; Thermoplastic or VPS

TAK thermoplastic granules or sticks soften in hot water ( 160 F) stay moldable for 5-10 minutes and are tough plastic once cooled.

2

Case of two implants together WD & ND

3

1 scoop of granules in hot water, white hard turns into clear moldable

4

Plastic mass moldable with 1 % shrinkage

5

Place soft mass onto teeth

6

Place BLP in correct position, relative to the teeth and the estimate root position

7

Repeat for the other implant

8

Adjust so the mesio-distal position is exactly as desired relative to the visible tooth structures, and the estimated rootmorphology

9

Add material as needed. The softened material stays pliable for 5- 10 minutes

10

Reinforce as desired

11

Thermoplastic material will harden in 1 hour at room temperature or 5 minutes in cold water

12

Material can be adjusted, while appreciating the thermoplastic nature

13

Vacuform vs thermoplastic, same case different materials, all work, you pick

14

Carrier for 3D Click Guide ; VPS

VPS ; stiff bite registration material

16

Blu-Mouse from Parkell is radio-opaque

17

Turn static files into dynamic content formats.