Flapless placement with Connective tissue augmentation

Categories ; Anterior, Flapless, grafting, Nobel Biocare

Hopeless lateral incisor, external resorbtion

2

Bone loss secondary to periodontal breakdown and resorption 3 ,month post extraction

3

Working cast

4

Desired Bucco –lingual axis for screw retained crown

5

Too far lingual

6

This would be too far buccal

7

Narrow Diameter Buccal wing in desired Mesio- Distal position

8

Ortho Acrylic connection of the wings to the vacuform carrier

9

Crossbar removal

10

Retention rails exposed

11

Surgical guide with 0 degree ( green) rotation-block

12

X-ray is correctly exposed, but predetermined axis is incorrect

13

Yellow rotation-block , 3 degrees, with drill guide ; needs more correction

14

Red rotation-block, 7 degree with drill guide ; angulation is now good.

15

Tissue punch, weâ&#x20AC;&#x2122;ll used the connective tissue plug to augment the buccal

16

Drill set at 7 mm, although planned implant will be 10. Drill at a safe short distance, then check.

17

Confirmed correctness of angulation, now prepared to full depth

18

2.0 at 10 mm

19

2.8 at 10 mm

20

3.0 at 7 mm, stepped back preparation for tapered Nobel Active implant. Note that we added on addition 3 MM (red) Flexistop to get the stepped back preparation

21

Guided tap

22

Confirm integrity of bone walls

23

Nobel Active 10 x 3.5

24

Guided placement

25

Implant placed

26

Remove epithelium from connective tissue plug. No additional surgical site needed as we use the punched out connective tissue

27

Small pouch created

28

Did not get the CT in place

29

Resorbable suture trough graft allows us now to pull the graft in place

30

CT graft in place

31

Buccal contour augmented

32

Final placement with bonded natural tooth pontic

33

Turn static files into dynamic content formats.

Create a flipbook