PROTOTYPE

PROTOTYPE ; the concept is the same Keywords; Anterior, Astra, Mini-flap,

Lower central incisor was lost 20 years ago.

2

Mach 2 model cast in Accu-trac tray. The cast has been sectioned at the estimated center of the to be placed implant

3

The wing assembly in place, showing the 5.4 mm space .

4

The bucco- lingual cut. The center of the implant was placed 0.5 mm more towards the buccal relative to the first line drawn. The coronal bone dimensions are limited. The axis of the implant is placed for a cement retained crown, as it exits at the incisal edge.

5

The multi-gauge evaluating the bone availability at the crestal level for an 3 mm implant

6

BLP in position.

7

The correction slot in the wing assembly allows for fine tuning of the mesio-distal position

8

The cross section has been removed, exposing the retention rails for the rotation block

9

A dummy 3 MM Astra implant,

10

A mini flap is made to preserve keratinized tissue

11

A 0 degree rotation block in place. Showing the ability for fully guided surgery even for the smallest tooth in the dentition.

12

Drill guide in place, with the 2.0 mm twist drill set at 11 mm length with the Nobel Biocare drill stops

13

The implant has been placed exactly as planned. Note the relationship between the implant and the crestal bone. Similar as in the previous picture with the dummy implant placed onto the cast

14

Post operative radiograph

15

Provisional in place after uncovering and placement of Atlantis custom abutment

16

Turn static files into dynamic content formats.

Create a flipbook