POWER TO PROTECT

Lubriplate’s complete line of ultra high-performance, hydraulic fluids has been designed to provide a wide range of benefits including: extended fluid change intervals, cooler operating temperatures, reduced friction and reduced downtime. Products include...

SYN LUBE SERIES 32-68 100%

•High-Performance, 100% Synthetic, Polyalphaolefin (PAO)-Based Fluids.

•Provides extended drain inter vals and excellent compatibility with seals.

• Available in ISO Viscosity Grades 32, 46 and 68.

Ho Series Hydraulic Oils Petroleum

•Premium-Quality, Petroleum-Based Hydraulic Oils (ISO Grades 32-100).

• Anti-wear fortified to protect hydraulic system components.

•High aniline points ensure long seal life with fewer leaks.

SFGO ULTRA SERIES 7-68 NSF H1

•NSF H1 Registered and NSF ISO 21469 Certified - Food Machinery Grade.

•High Performance, 100% Synthetic Food Machinery Grade Fluids.

• Available in ISO Viscosity Grades 7, 15, 22, 32, 46 and 68.

•Fortified with Lubriplate’s proprietar y anti-wear additive

SYNXTREME FRH1-46

•High-Performance, FM Approved, Fire Resistant Hydraulic Fluid.

•NSF H1 Registered and NSF ISO 21469 Certified - Food Machinery Grade.

•ECO-Friendly, Readily Biodegradable (OECD 301F).

•Fortified with Lubriplate’s proprietar y anti-wear additive .

Zf Series Hydraulic Fluids Eco

•Hea vy-Duty, High-Performance, Extended Life, Hydraulic Fluids.

•ECO-Friendly - Free of zinc or silicone compounds.

•Provides long ser vice life and extended fluid change intervals.

BIO-BASED GREEN SERIES ECO

• Vegetable-Based Oils for use in environmentally sensitive applications.

•ECO-Friendly - Ultimately Biodegradable (Pw1).

•Zinc-free additives provide exceptional anti-wear and anti-rust protection.

Marine Safe Series Eco

•For equipment operating in environmentally sensitive locations.

•Zinc-free and non-toxic to aqua tic life.

•Exceeds U.S. EPA LC50 and US Fish and Wildlife requirements.

•Meets or exceeds the requirements of most hydraulic equipment

BIO-SYNXTREME HF SERIES ECO

• Advanced Synthetic Polyalkylene Glycol (PAG)-based hydraulic fluids.

•Designed for environmentally sensitive industrial and marine applications.

• Meets U.S. EPA Vessel General Permit (VGP) Requirements. Readily biodegradable.

•Does not leave a sheen on the water.

To learn more visit us at: www.lubriplate.com

Here is the solution to Figure It Out on page 5.

» WHEN REPLACING THE electric motor, the company did not notice that the old motor had a 1.2 service factor, which was enough pull-out power. The new motor, however, had a 1.0 service factor and a lower pull-out power. Adding a solenoid unloading relief valve reduced the motor’s start-up load.