Mist-Fan Brochure - EN

EN GLISH

Misting system for breeding farms?

VENTOFRESCO

The complete solution for all breeding farms.

More productivity Healthy animals Odours neutralization

IDROTECH

VentoFresco is a complete nebulization and ventilation system, for all types of breeding farms

VentoFresco is powered by the Fog 70 Extra, 80 bar pumping module, and generates a ventilated misting flow through an air circulator fan with an AISI 316 stainless steel ring, complete with anti-drip nozzles.

Autonomous

2

Programmable

Modular

IDROTECH

More productivity VentoFresco cools stables and farms by reducing heat stress that weakens and makes animals less productive. The animals general well-being increases their appetite and significantly decreases mortality rates. The results are: more milk, more meat, more eggs and more puppies.

Healthy animals VentoFresco suppresses dusts, responsible for the outbreak of diseases and respiratory problems in animals.

preventing the proliferation of germs and bacteria and protecting the well-being of the animals.

Animals, by moving, lift from the ground dirt and dust, which are harmful to their health. The nebulization of VentoFresco suppress the dust particles,

Odours neutralization VentoFresco eliminates odour emissions that are constantly produced in farms. The ventilated nebulization neutralizes harmful gases, carbon dioxide and odours produced by the metabolism and scat of animals.

In order to observe the limits established by law and to safeguard the health of animals and those who work in stables and farms, it is necessary to immediately eliminate these gases and odours where they are generated.

3

IDROTECH Possible programming of work break cycles, to optimise consumption and make the line independent.

Stainless steel blades. Very resistant to corrosion, our blades last much longer than galvanized blades

X support structure. The fan structure has the particular X shape to provide more robustness and to reduce vibration. It is made of triangular profile tube for an increased strength.

4

The manifold is capable of supporting the supply of several configurable and modular lines.

Easy motor unassembly. Our new motor support arm allows the motor to be unassembled quickly without removing the pulley.

Integrated humidistat and thermostat allow independent activation of the system in certain humidity and temperature conditions.

5

IDROTECH

Configuration example Stables/Sheds with 18 fans.

N. 4 modules 70 bar 3x400 V - 50 Hz from 96 to 240 nozzles N. 18 circulator fan Ø 130 cm 230V - 50/60 Hz N. 18 AISI 316 stainless steel ring Ø 80 cm n. 8 FP02 nozzles

12 fans

6 fans

VentoFresco generates a ventilated misting flow through a 130 cm fan.

72m

STABLES and SHEDS

20m

6

MILKING PARLOUR

10m

ZX.KV18-G

ZX.KV24-G

ZX.KV30-G

11l/min

15l/min

18l/min

12pz

18pz

24pz

30pz

10” water inlet kit complete with pressure stabiliser, support bracket, 5 and 1mcr stringwound cartridges, connection hose, tightening spanner and spare cartridges (5+5 pcs)

1pz

H.p. outlet kit for 4 lines, ø9,6mm complete with h.p. filter, shut-off valves, polyamide 9,6mm tube and connection to fog modules

1pz

Temperature probe, (for standard thermostat), with 20m cable

1pz

Humidity probe 4:20 mA, (for standard humidstat), with 20m cable

1pz

H.p. polyamide pipe, ø9,6mm, rolls of 100m, black (max pressure 100bar at 23°C)

2pz

3pz

Pipe quick coupling, “Tee”, in nickel-plated brass, ø9,6mm

11pz

16pz

22pz

28pz

Tube cutter for polyamide pipe ø2-12mm

1pz

51”circulator air, 230V 50/60hz, 1,1 Kw, 41306 M3/h Dimension: mm 1380x1380x330 Weight: 52 Kg AISI 316 stainless steel ring, complete with anti-drip nozzles, AP filter and slip-lock connector for d. 9,6mm polyamide pipe

IDROTECH

ZX.KV12-G

8l/min

FOG 70 EXTRA misting system pump, 3x400 W - 50Hz, 70 bar, professional pump, crankshaft, complete with timer, humidistat, thermostat and weekly programmer

7

Copyrights© to this catalogue belong to IDROBASE GROUP® Srl. Reading, reference and dissemination in paper or electronic formats for personal use are permitted. Use for commercial purposes is not permitted, nor is any type of alteration except with the written consent of IDROBASE GROUP® Srl. This catalogue cancels and supersedes the earlier version. This catalogue provides general information on the products supplied by IDROBASE GROUP® Srl. It is intended for retailers, system engineers, designers and more generally, all those who are already adequately familiar with said products, the materials from which they are made, their characteristics, efficiency and operation; it is therefore not intended for consumers who, in order to handle, install or perform any operation with the goods described here, must necessarily contact qualified and skilled personnel. Also, with regard to skilled personnel, this catalogue should be considered a mere commercial tool, not containing the necessary technical specifications - which may be obtained free of charge from Idrobase, and as such, not suitable for use as a single go-to reference tool for the design, construction or installation of any kind of system. The illustrations, technical characteristics, functions and other information given here about individual products, systems, installations and the like are based on the current state of the art: however, only the most immediately applicable information can be reproduced here, without any consideration for the global data necessary to design, implement and install any system, which must therefore be carefully assessed by designers, system engineers and installers. Therefore, for specific indications on all products in the catalogue, please contact our main office, where competent staff are always on hand to answer any additional queries. All the illustrations reproduced here may be slightly different from actual products and therefore, they should simply be intended as closely representing real items. We reserve the right to introduce changes in all the products. For this reason, too, it is advisable to directly contact our main office. In case of doubts regarding interpretation, the original Italian text will prevail. When a new reprint is published, the present edition will no longer be valid.

Idrobase Group Srl Via dell’Industria, n. 25 35010 Borgoricco (PD) Italia T: +39 049 9335903 r.a. F: +39 049 9335922 www.idrobasegroup.com info@idrobasegroup.com

SOLUZIONE BREVETTATA

MADE IN ITALY

Recognition of maximum commercial reliability.

Turn static files into dynamic content formats.

Create a flipbook