keep your car shining for years
EN
i
Stella
With Idrobase water inlet kit: 2-year warranty
MADE IN ITALY
>1450 >1750 Rpm 50Hz
Rpm 60Hz
Optional, With Idrobase inlet water kit: 2-year warranty
Professional h. p. washer Stella enables a perfect wash, easily, safely and effortlessly. Ideal for companies that use the pressure washer up to 8 hours a day.
FRAME
Made of chromed steel with protective polyester paint
VISIBLE PUMP
Professional: 50% less maintenance time
COMFORT LINE SWIVEL ACCESSORIES
When working helps well-being
Kit of lift brackets Optional
CopyrightŠ Idrobase Group. All rights reserved.
Hot Water Technical data Code
ZX.2133
Model
Version
Pressure
Fl. rate
Rpm
Temperature
Power
Wght
1450 150/15
By-pass
150bar
15l/min
1450
45 - 80°C *
5.5hp (3x400V-50Hz)
136kg
1450 150/15 TS
Total Stop
150bar
15l/min
1450
45 - 80°C *
5.5hp (3x400V-50Hz)
137kg
1450 200/15
By-pass
200bar
15l/min
1450
45 - 80°C *
7.5hp (3x400V-50Hz)
151kg
1450 200/15 TS
Total Stop
200bar
15l/min
1450
45 - 80°C *
7.5hp (3x400V-50Hz)
152kg
1450 150/21
By-pass
150bar
21l/min
1450
45 - 65°C *
7.5hp (3x400V-50Hz)
151kg
ZX.2146-TS
1450 150/21 TS
Total Stop
150bar
21l/min
1450
45 - 65°C *
7.5hp (3x400V-50Hz)
152kg
ZX.2133-60
1750 150/15
By-pass
150bar
15l/min
1750
45 - 80°C *
5.5hp (3x400V-60Hz)
136kg
Total Stop
150bar
15l/min
1750
45 - 80°C *
5.5hp (3x400V-60Hz)
137kg
By-pass
200bar
15l/min
1750
45 - 80°C *
7.5hp (3x400V-50Hz)
151kg
Total Stop
200bar
15l/min
1750
45 - 80°C *
7.5hp (3x400V-50Hz)
152kg
By-pass
150bar
21l/min
1750
45 - 65°C *
7.5hp (3x400V-50Hz)
151kg
Total Stop
150bar
21l/min
1750
45 - 65°C *
7.5hp (3x400V-50Hz)
152kg
ZX.2146
Stella 60Hz
ZX.2133-60-TS 1750 150/15 TS ZX.2134-60
1750 200/15
ZX.2134-60-TS 1750 200/15 TS ZX.2146-60
1750 150/21
ZX.2146-60-TS 1750 150/21 TS
ZX.1667-S
Filter kit 10" composed of: transparent 10" filter, cleanable cartridge 270mesh - 5mcrs, connection hose and filter tightening wrench
• • • • • •
ZX.2143
Low pressure detergent kit complete with: l.p. adjustable injector, detergent nozzle, 5L tank and chrome-plated steel tank rack
• • • • • •
ZX.2126
High pressure detergent kit complete with: stainless steel water tank with float valve and connecting hose, detergent flow regulator, 5L tank and chrome-plated steel tank rack
• • • • • • • • • •
• • • • •
ZX.2146 ZX.2146-TS
Description
ZX.2134 ZX.2134-TS
Code
ZX.2133 ZX.2133-TS
Optional
*Steam stage: 140°C
ZX.2146-60 ZX.2146-60-TS
ZX.2134-TS
ZX.2134-60 ZX.2134-60-TS
ZX.2134
ZX.2133-60 ZX.2133-60-TS
Stella 50Hz
ZX.2133-TS
• • • •
• • • •
• • • • •
• • • •
ZN.CC100B3P3P ZN.CC150B3P3P ZN.CC200B3P3P
H.p. hose R1 5/16" 10m, M22x1.5 F-F
CDR.7062
Hose connection, M22x1.5 M-M
ZX.1272-900 ZX.1273-900 ZX.1274-900 ZX.1282-900 ZX.1283-900 ZX.1285-900 ZX.KAC10F ZX.KAC10G ZX.KAC10V
CdR 80 lance, 900mm, with rotating nozzle flow rate 045
ZX.1675
Kit of lift brackets
• • • • • • • • •
ZX.0982-P
POM foam kit with 1L tank with extended length M quick coupling
• • • • • •
H.p. hose R1 5/16" 15m, M22x1.5 F-F H.p. hose R1 5/16" 20m, M22x1.5 F-F
•
CdR 80 lance, 900mm, with rotating nozzle flow rate 050 CdR 80 lance, 900mm, with rotating nozzle flow rate 070 CdR 80 lance, 900mm, with sandblast nozzle flow rate 045
•
CdR 80 lance, 900mm, with sandblast nozzle flow rate 050 CdR 80 lance, 900mm, with sandblast nozzle flow rate 075 Hose for sewer nozzles 1/4" 210bar 10m, inlet M long, SS nozzle with 3 bottom holes, flow rate 045 Hose for sewer nozzles 1/4" 210bar 10m, inlet M long, SS nozzle with 3 bottom holes, flow rate 055 Hose for sewer nozzles 1/4" 210bar 10m, inlet M long, SS nozzle with 3 bottom holes, flow rate 070
Technical features
•
• •
• •
• •
• •
• •
Data, tables and pictures are purely indicative. Any changes can be made by the manufacturer without prior notice.
Standard equipment
• Tubular frame set made of chromed steel treated with polyester
• Heater made of grey painted steel, galvanised steel inner jacket and stainless steel chimney
• H.p. hose 8m with screw quick couplings M22x1.5F-F long swivel
• Cover made of thermoformed polystyrene
• Burner with delayed ignition
• Professional pump 1450Rpm (1750Rpm on 60Hz vers.), crankshaft, brass head, 3 ceramic plungers
• Fuel tank 14L with level indicator
• Professional spray gun with female swivel ball quick coupling
• Electric motor 1450Rpm 50Hz (1750Rpm on 60Hz vers.), complete with electric box IP55 with ON/OFF circuit breaker switch, thermostatwith switch and 5m electric cable Copyright© Idrobase Group. All rights reserved.
• Fuel filter with drain valve • Coil double spiral type ø20, length 28.5m • Dimensions WxLxH: 570 x 790 x 860mm
• Lance 900mm with male quick coupling • 4 quick H.p. nozzles (0°-15°25°-40°) high resolution 3
Transformer
transformer
With Idrobase water inlet kit: 2-year warranty
Patented solution
MADE IN ITALY
>1450 >1750
transformer
Rpm 50Hz
Rpm 60Hz
Optional, With Idrobase inlet water kit: 2-year warranty
Professional h. p. washer Transformer enables a perfect wash, easily, safely and effortlessly. Transformer has been entirely designed, engineered, patented and manufactured from A to Z by Idrobase Group. It is ideal for companies that use the h.p. washer up to 8 hours a day.
VISIBLE PUMP
Professional: 50% less maintenance time
CONTROL PANEL
Safe: IP56 certified Simple: only one circuit breaker switch, no electronics
SIMPLE AND STURDY Attractive design, easy to use and sturdy structure
"COMFORT LINE" ACCESSORIES
When working helps well-being
CopyrightŠ Idrobase Group. All rights reserved.
Cold Water Pressure
Fl. rate
Rpm
Power
Wght
Transformer 50Hz
ZX.2657 ZX.2657-TS ZX.2661 ZX.2661-TS ZX.2663 ZX.2663-TS
150/15
By-pass
150bar
15l/min
1450
5.5hp (3x400V-50Hz)
73kg
150/15 TS
Total Stop
150bar
15l/min
1450
5.5hp (3x400V-50Hz)
74kg
150/21
By-pass
150bar
21l/min
1450
7.5hp (3x400V-50Hz)
87kg
150/21 TS
Total Stop
150bar
21l/min
1450
7.5hp (3x400V-50Hz)
88kg
200/15
By-pass
200bar
15l/min
1450
7.5hp (3x400V-50Hz)
87kg
200/15 TS
Total Stop
200bar
15l/min
1450
7.5hp (3x400V-50Hz)
88kg
ZX.2657-60 ZX.2657-60-TS ZX.2661-60 ZX.2661-60-TS ZX.2663-60 ZX.2663-60-TS
1750 150/15
By-pass
150bar
15l/min
1750
5.5hp (3x400V-60Hz)
73kg
1750 150/15 TS
Total Stop
150bar
15l/min
1750
5.5hp (3x400V-60Hz)
74kg
1750 150/21
By-pass
150bar
21l/min
1750
7.5hp (3x400V-50Hz)
87kg
1750 150/21 TS
Total Stop
150bar
21l/min
1750
7.5hp (3x400V-50Hz)
88kg
1750 200/15
By-pass
200bar
15l/min
1750
7.5hp (3x400V-50Hz)
87kg
1750 200/15 TS
Total Stop
200bar
15l/min
1750
7.5hp (3x400V-50Hz)
88kg
Optional
Code
Description
ZX.1681-S
Filter kit 10" composed of: transparent 10" filter, cleanable cartridge 270mesh - 5mcrs, connection hose and filter tightening wrench
ZN.CC100B3P3P
H.p. hose R1 5/16", 315bar, 10m, M22x1.5 F-F
ZX.2663 ZX.2663-60 ZX.2663-TS ZX.2133-60-TS
Version
ZX.2661 ZX.2661-TS ZX.2661-60 ZX.2661-60-TS
Model
ZX.2657 ZX.2657-TS ZX.2657-60 ZX.2657-60-TS
Code
Transformer 60Hz
Technical data
•
•
•
• • •
• • •
ZN.CC200B3P3P
H.p. hose R1 5/16", 315bar, 20m, M22x1.5 F-F
• • •
ZX.2151
Hose reel kit composed of: painted support, manual hose reel and connection hose (WITHOUT H.P. HOSE)
•
•
•
CDR.7062
Hose connection, M22x1.5 M-M
•
•
•
ZX.7117
CdR 80 lance, 1200mm with bend, inlet G1/4" M, outlet 1/4" NPT-F
•
•
ZX.0292
Set of quick nozzles, flow rate 050 with ball quick coupling G1/4" F
ZX.0293
Set of quick nozzles, flow rate 045 with ball quick coupling G1/4" F
• •
ZX.1496 ZX.1571-050 ZX.1571-045 ZX.1571-070 ZX.KAC10G ZX.KAC10F ZX.KAC10H ZX.0520-M ZX.0519-M ZX.0521-M
Set of quick nozzles, flow rate 070 with ball quick coupling G1/4" F
ZX.0996-P
POM foam kit with 1L tank with extended length M quick coupling + pair of swivel ball quick couplings
ZN.CC150B3P3P
H.p. hose R1 5/16", 315bar, 15m, M22x1.5 F-F
Rotating nozzle G1/4" M, flow rate 050 Rotating nozzle G1/4" M, flow rate 045
•
•
Rotating nozzle G1/4" M, flow rate 070 Hose for sewer nozzles 1/4" 210bar 10m, inlet M long, SS nozzle with 3 bottom holes, flow rate 045 Hose for sewer nozzles 1/4" 210bar 10m, inlet M long, SS nozzle with 3 bottom holes, flow rate 055 Hose for sewer nozzles 1/4" 210bar 10m, inlet M long, SS nozzle with 3 bottom holes, flow rate 065 Sandblasting head kit G1/4" M, flow rate 050 Sandblasting head kit G1/4" M, flow rate 045
•
• • •
• •
• •
Sandblasting head kit G1/4" M, flow rate 075
•
•
• •
Data, tables and pictures are purely indicative. Any changes can be made by the manufacturer without prior notice.
Technical features • Frame set made of chromed steel and protected by transparent paint • Thermoformed cover in polystyrene • Professional pump 1450Rpm (1750Rpm on 60Hz vers.), crankshaft, brass head, 3 ceramic plungers Copyright© Idrobase Group. All rights reserved.
Standard equipment • Electric motor 1450Rpm 50Hz (1750Rpm on 60Hz version), complete with ON/OFF circuit breaker switch, and 5m electric cable
• H.p. hose R1 5/16" 10m, screw quick couplings M22x1.5 F-F
• Dimensions WxLxH: 815 x 590 x 1042mm
• Lance 700mm
• Spray gun RED 50, inlet M22x1.5 M • H.p. nozzle 25° high resolution 5
Multiplo
With Idrobase water inlet kit: 2-year warranty
MADE IN ITALY
>1450 Rpm 50Hz
Inlet water up to maximum 85°C
Optional, With Idrobase inlet water kit: 2-year warranty
The modular system for car washes Thanks to Multiplo you can have a custom tailored professional pressure washing system. A module completed with different variants, to achieve professional and specific pressure washing. Ideal for professional washing systems: Multiplo is available in a number of models that can be supplied with water up to 85°C.
SYSTEM WITH AISI 304 STAINLESS STEEL COVER and galvanised frame
INDUSTRIAL PUMP
With patented seal system between head and guard that guarantees high performance and reliability
CONTROL PANEL
Complete with 24V controls, hour meter and master safety switch
USE WITH INLET WATER UP TO MAX 85°C
Copyright© Idrobase Group. All rights reserved.
Hot Water Technical data Code
Model
Version
Pressure
Fl. rate
Rpm
Power
Wght
ZX.1740-HW
1450 180/26 TS
Total Stop
180bar
26l/min
1450
12.5hp (3x400V-50Hz)
80.5kg
ZX.1741-HW
1450 140/33 TS
Total Stop
140bar
33l/min
1450
12.5hp (3x400V-50Hz)
98.5kg
ZX.1742-HW
1450 110/42 TS
Total Stop
110bar
42l/min
1450
12.5hp (3x400V-50Hz)
98.5kg
ZX.1741-HW ZX.1742-HW
Optional
ZX.1740-HW
Use with inlet water up to max 85°C.
Code
Description
ZX.0302-R
Inlet water filter kit 10" complete with pressure stabiliser: 4 pressure gauges, wall bracket, 2000mm connection hose and 2 filter cartridges (1-3mcrs and 5mcrs), shut-off valve and filter tightening wrench
ZX.0303-R
Inlet water filter kit 20" complete with pressure stabiliser: 4 pressure gauges, wall bracket, 2000mm connection hose and 2 filter cartridges (1-3mcrs and 5mcrs), shut-off valve and filter tightening wrench
ZX.1678
Hose R1 1/2" 210bar M22x1.5 F-G1/2" F for connecting the system to the line
•
•
ZX.1679
Accumulator kit 0.35L, M22x1.5 M-F to reduce water hammering
•
•
•
•
Data, tables and pictures are purely indicative. Any changes can be made by the manufacturer without prior notice.
Technical features • Frame set made of galvanised steel with cover in AISI 304 stainless steel
• Glycerine-filled pressure gauge made of AISI 304 stainless steel
• H.p. pump with camshaft, 3 ceramic plungers, bronze alloy connecting rods and dual gasket pack in special mix
• Brass water inlet filter "Y" shaped • Control panel in 24V complete with: hour meter as standard, master safety switch and ON/OFF start switch and 5m electric cable
• Electric motor 1450Rpm , 3x400V-50Hz • Brass by-pass valve
Copyright© Idrobase Group. All rights reserved.
• Dimensions WxLxH: 45 x 78 x 50mm
7
Singolo
With Idrobase water inlet kit: 2-year warranty
MADE IN ITALY
>1450 Rpm 50Hz
Optional, With Idrobase inlet water kit: 2-year warranty
The perfect solution for car washes Singolo enables you to optimise the washing system. It offers the possibility to have a perfect wash, simply, quickly and economically. Singolo is the answer for companies who want higher quality in the pressure washing process, with reduced costs and time taken. It is the ideal solution for the car wash.
Technical data Code
Model
Version
Pressure
Fl. rate
Rpm
Power
Wght
ZX.2314
FREDDO 1450 150/15
By-pass
150bar
15l/min
1450
5.5hp (3x400V-50Hz)
54kg
ZX.2314-TS
FREDDO 1450 150/15 TS
Total Stop
150bar
15l/min
1450
5.5hp (3x400V-50Hz)
57kg
ZX.2315
FREDDO 1450 150/21
By-pass
150bar
21l/min
1450
7.5hp (3x400V-50Hz)
67.5kg
ZX.2315-TS
FREDDO 1450 150/21 TS
Total Stop
150bar
21l/min
1450
7.5hp (3x400V-50Hz)
70kg
60Hz versions are available. Ask for technical features.
Optional
Data, tables and pictures are purely indicative. Any changes can be made by the manufacturer without prior notice.
Code
Description
ZX.0302-R
Inlet water filter kit 10" complete with pressure stabiliser: 4 pressure gauges, wall bracket, 2000mm connection hose and 2 filter cartridges (1-3mcrs and 5mcrs), shut-off valve and filter tightening wrench
Technical features • Cover AISI 304 stainless steel • Professional pump 1450Rpm, crankshaft, brass head, 3 ceramic plungers • Pressure accumulator to attenuate water hammering • Brass water inlet filter "Y" shaped • Electric motor, 50Hz, complete with ON/OFF circuit breaker switch
Standard equipment • Electric panel, equipped with ON/OFF switch and hour meter. 3m electric cable for connection to the module and 5m for connection to the electric power supply • Dimensions WxLxH: 530 x 450 x 350mm
• H.p. hose 10m with swivel screw quick coupling • Professional spray gun with female swivel ball quick coupling • Lance 900mm with male quick coupling • H.p. nozzle 25° angle, high resolution Copyright© Idrobase Group. All rights reserved.
Cold Water TRI.0009 H.p. hose in AISI 304 stainless steel ø14x2mm, in 3m sections
RR.TN9214SR38 Ogive start fitting made of galvanised steel, G3/8" M-ø14mm
ZX.0514-C3 Stainless steel anti-vibration bracket for pipe ø14, complete with stainless steel screws
ZN.CC007X1Z8P H.p. connection hose, between module and line, R1 5/16", 700mm G3/8" F-F 90°
RR.TN9214SR38 Ogive start fitting made of galvanised steel G3/8" M-ø14mm EFF.2321N203 H.p. ball valve made of brass, *Viton® O-Ring, G3/8" F-F, 210bar
CDR.7012 Female ball quick coupling made of AISI 416 stainless steel, G3/8" F, 250bar
S.LI0110SA Pressure accumulator 0.1L, 210bar, inlet G3/8" F RR.TN10014S Ogive "T" fitting made of galvanised steel, ø14mm TRI.0009 H.p. hose in AISI 304 stainless steel ø14x2mm, in 3m sections
ZX.0514-C3 Stainless steel anti-vibration bracket for pipe ø14, complete with AISI 304 stainless steel screws
CDR.7011 Male ball quick coupling, made of AISI 416 stainless steel, G3/8" F, 250bar
CDR.1296 Wall support for hose, made of AISI 304 stainless steel
CDR.1321 AISI 304 stainless steel wall support for lances: foam lance + 2 lances with various attachments
CDR.7017 Nipple G3/8" M M22x1.5 M
ZN.CC100B8Z3P H.p. hose R1 5/16", 10m, 315bar, M22x1.5 F-F swivel ZN.CC200B8Z3P H.p. hose R1 5/16", 20m, 315bar, M22x1.5 F-F swivel
ZX.1413 Spray gun RED 50, inlet M22x1.5 M, female swivel ball outlet
GRP.0027 Electric panel cover made of AISI 304 stainless steel
ZX.1162 CdR 80 lance 500mm, inlet extended quick male, outlet 1/4" NPT-F
ZX.1164 CdR 80 lance, 900mm, inlet male extended, outlet 1/4" NPT-F
Installation example high pressure line complete with: fittings, anti-vibration brackets, h.p. ball valves and AISI 304 stainless steel pipe ø14mm Copyright© Idrobase Group. All rights reserved.
*VITON® is a registered trademark of Dupont
9
Car Wash
Vaporator
The professional steam generator that enables you to wash and sanitise in depth both the interior and exterior of the vehicle. Particularly suited for car washes and interiors cleaning for various means of transport such as cars, airplanes, boats. In regard to safety, Vaporator is equipped with: safety valve certified TÜV, thermostat, photocell for flame detection, pressure switch and filtering system. Diesel fired boiler. MADE IN ITALY
Accessories included Hose 10m with scald guard
Model
IB.2100
Vaporator
Pressure
9bar
Gun with PTFE nozzle ®
Dry-wet steam Outlets Max. steam Power capacity temperature
33-42kg/h
no. 1
180°C
400W (1x230V-50/60Hz)
Water tank
Fuel tank
Warm-up time
27L
20L
3 mins.
Weight Dimensions WxLxH
120kg
700x106x102mm
Aladino
Professional automatic floor mat washer that cleans the mat thoroughly in just 20 seconds. Allows immediate use of the mat after cleaning. Complete with automatic safety stop, signalling device for lack of foam during washing, and drain pipe. AISI 304 stainless steel body.
max width 600mm
Model
ZX.7048
Aladino
Power
300W (1x230V-50Hz)
Weight
80kg
Dimensions WxLxH
940 x 500 x 110mm
Copyright© Idrobase Group. All rights reserved.
Car Wash Washing station Assemble a personalised, modular washing station: our Auto Bella Car Wash system makes it possible to create different solutions according to the washing needs and the context where the system is located.
Rotating boom
H.p. hose for rotating booms
On page 12
On page 13
CDR.1671 CDR.1321
AISI 304 stainless steel lance holder suitable for lances with AB.0004, CDR.0372, CDR.7011 On page 16
Accessory holder AISI 304 SS
Sprayers
On page 31
Foam Lances On page 18
CDR.1676
Foam lance holder AISI 304 SS
Guns
On page 14
Sprayers
On page 31
Lance holder On page 12
Lances
On page 15
CopyrightŠ Idrobase Group. All rights reserved.
11
Car Wash Rotating booms and accessories
MADE IN ITALY
Flexible rotating "Z" ceiling boom made of stainless steel
360°
Length
Inlet
Outlet
Max pressure
200bar
Code
ZX.1700
1550mm
G1/4" F
G1/4" M swivel
Max flow rate
40l/min
ZX.1700-175
1750mm
G1/4" F
G1/4" M swivel
Max temperature
90°C
ZX.1700-200
2000mm
G1/4" F
G1/4" M swivel
Length
Inlet
Outlet
Flexible rotating "Z" wall boom made of stainless steel
180°
Code Max pressure
200bar
ZX.1702
1550mm
G1/4" F
G1/4" M swivel
Max flow rate
40l/min
ZX.1702-175
1750mm
G1/4" F
G1/4" M swivel
Max temperature
90°C
ZX.1702-200
2000mm
G1/4" F
G1/4" M swivel
ZX.1701
CDR.1436
CDR.1436-P
Wall support for rotating boom, made of painted galvanised steel
Lance holder floor stand, made of stainless steel 700mm
Lance holder wall mount, made of stainless steel 700mm
Swivel couplings
a
b
Code
Inlet
Outlet
Version
a
CDR.1331
G1/4" F
G1/4" M
straight
a
CDR.1332
G 3/8" F
G 3/8" M
straight
b
CDR.1328
G1/4" M
G1/4" F
90°
b
CDR.1329
G 3/8" M
G 3/8" F
90°
b
CDR.1330
G1/4" M
G 3/8" F
90°
Straight and 90°swivel couplings, made of stainless steel, with stainless steel ball bearings lubricated with water-resistant grease to reduce friction, 250bar, 45l/min, 160°C
Copyright© Idrobase Group. All rights reserved.
Car Wash H.p. hoses for full- & self-service car wash
blue
Code
MADE IN ITALY
Length
ZB.SN10X
100m
only hose
250bar, R7 5/16" - DN8 - BLUE high pressure hose Ideal for producing h.p. hoses to be used in full-service and self-service car washes. Anti-abrasion and stain resistant covering. Resistant to atmospheric and chemical agents. Highly resistant double synthetic braid and interior made of advanced thermoplastic material. Hose
Braids
5/16"
blue
2
Code
G 3/8" M
Ø Inside
8mm
Length
Ø Outside
Working pressure
Burst pressure
14,3mm
250bar
900bar
blue
-40°C +90°C
Code
Colour
blue
Length
ZB.SN035D2A1X 3,5m
ZB.SN035D1Z1Z
ZB.SN040D2A1X 4m
ZB.SN040D1Z1Z 4m
ZB.SN045D2A1X 4,5m
ZB.SN045D1Z1Z 4,5m
3,5m
G 3/8" F
ZB.SN050D2A1X 5m
ZB.SN050D1Z1Z
5m
ZB.SN060D2A1X 6m
ZB.SN060D1Z1Z
6m
ZB.SN070D2A1X 7m
ZB.SN070D1Z1Z
7m
G1/4" F
G 3/8" F
w/bend restr.
Fittings
Temperature
w/bend restr.
Code
Description
Fittings
Code
Description
CDR.1C
Blue bend res.
CDR.1Z
Crimp fitting G3/8" F
CDR.10W
Crimp bushing
CDR.2A
Crimp fitting G3/8" M
CDR.1X
Crimp fitting G1/4" F
ZX.3P
Crimp fitting M22x1,5 F ø14 BLACK ring nut
Copyright© Idrobase Group. All rights reserved.
13
Guns CdR "Comfort Line"
MADE IN ITALY
RED 25 spray gun, outlet female swivel ball type KW
b
Max pressure
220bar
Max flow rate
25l/min
Max temperature
150°C
Code
a
c
Features suitable for continuous use: 180bar, 15l/min, 90°C
Inlet
Outlet
a
ZX.1400
G3/8" F
F ball KW type
b
ZX.1401
G3/8" F swivel
F ball KW type
c
ZX.1402
G3/8" M
F ball KW type
d
ZX.1403
M22x1,5 M
F ball KW type
d
ZX.0339 Service kit for RED25 spray gun
RED 50 spray gun, outlet female swivel ball type KW
c
Max pressure
220bar
Max flow rate
40l/min
Max temperature
160°C
Code
a
b
d
Features suitable for continuous use: 200bar, 21l/min, 90°C
Inlet
Outlet
a
ZX.1410
G3/8" F
F ball KW type
b
ZX.1411
G3/8" F swivel
F ball KW type
c
ZX.1412
G3/8" M
F ball KW type
d
ZX.1413
M22x1,5 M
F ball KW type
CDR.0955 Service kit for RED50 spray gun
CDR.0001
ZX.1243
Swivel ball quick coupling F KW type, inlet G1/4" M
Set of Dolly O-Rings, for CDR.0001
quantity 9x1
AB.0004 Quick coupling, M KW type, inlet G1/4" F
quantity 1x50
CDR.7683
CDR.7681
CDR.1423
ECO spray gun, inlet M 22x1,5 M, outlet G1/4" F, 180bar, 15l/min, 40°C
ECO spray gun, inlet G3/8" F, outlet G1/4" F, 180bar, 15l/min, 40°C
Aura weep gun, inlet G3/8" F, outlet G1/4" F, 210bar, 25l/min, 150°C
Copyright© Idrobase Group. All rights reserved.
Lances Accessories
CdR 80 lance, moulded handle, with bend - outlet 1/4" NPT-F
Code
Length
Inlet
Outlet
ZX.1162
500mm
M coupling KW type
1/4" NPT-F
40l/min
ZX.1163
700mm
M coupling KW type
1/4" NPT-F
150°C
ZX.1164
900mm
M coupling KW type
1/4" NPT-F
ZX.1165
1200mm
M coupling KW type
1/4" NPT-F
ZX.1166
1500mm
M coupling KW type
1/4" NPT-F
ZX.1167
1700mm
M coupling KW type
1/4" NPT-F
Max pressure
220bar
Max flow rate Max temperature
Made of chromed steel
CdR 80 lance, moulded handle, with bend - outlet M18x1,5 M + O-Ring
Length
Inlet
Outlet
Max pressure
220bar
Code
ZX.1176
500mm
M coupling KW type
M18x1,5 M
Max flow rate
40l/min
ZX.1177
700mm
M coupling KW type
M18x1,5 M
Max temperature
150°C
ZX.1178
900mm
M coupling KW type
M18x1,5 M
ZX.1179
1200mm
M coupling KW type
M18x1,5 M
ZX.1180
1500mm
M coupling KW type
M18x1,5 M
ZX.1181
1700mm
M coupling KW type
M18x1,5 M
Length
Inlet
Outlet
Made of chromed steel
CdR 80 lance, moulded handle, straight - outlet 1/4" NPT-F
Code Max pressure
280bar
ZX.7127
700mm
G1/4" M
1/4" NPT-F
Max flow rate
40l/min
ZX.7128
900mm
G1/4" M
1/4" NPT-F
Max temperature
150°C
ZX.7129
1200mm
G1/4" M
1/4" NPT-F
Length
Inlet
Outlet
700mm
G1/4" M
1/4" NPT-F
"Sword" lance made of stainless steel for car wash - outlet 1/4" NPT-F
Code Max pressure
250bar
Max flow rate
40l/min
Max temperature
150°C
Copyright© Idrobase Group. All rights reserved.
CDR.1430
15
Car Wash Accessories ZX.1705-SS Stainless steel nozzle holder, 1/4"NPT-F, with M connection type KW
MADE IN ITALY
ZX.1705-QK Quick ball nozzle holder, with M connection KW type
ZX.7113
ZX.7140
Nozzle holder with black guard. Made of galvanised steel,inlet G1/4" F, outlet 1/4" NPT-F
Nozzle holder with blue guard. Made of stainless steel, inlet G1/4" F, outlet 1/4" NPT-F
ZX.7019
CDR.7023
CDR.7024
ZX.0154
Brass adapter for lance fitting Kärcher, inlet M 18x1,5 F, outlet G1/4" M. Ideal to fit nozzles with inlet G1/4" F on lances fitting Kärcher with connection M 18x1,5 M
Nozzle tip retainer fitting Kärcher, M 18x1,5 F
Brass nozzle holder fitting Kärcher, G1/4" F - M 18x1,5 M
Set of O-Rings, for brass nozzle holder (code CDR.7024)
quantity 1x100
CDR.1321
CDR.1296
Wall mount lance holder, made of AISI 304 st. steel
Wall mount hose holder, made of AISI 304 stainless steel
Car wash brushes
Code
Bristle length
CDR.1432
CDR.1435
CDR.1433
77mm
Foam injector ø2,5mm for car wash brushes, made of stainless steel, inlet G1/4" F, outlet G1/4" M
Brush holders for car wash, made of stainless steel
CDR.1434
97mm
600 Car wash brush, black horsehair, G1/4" F, 5bar, 60°C
150
352mm
Copyright© Idrobase Group. All rights reserved.
Nozzles H.p. nozzles, NPT-M 1/4" NPT-M
Code
H.p. nozzle 1/4" NPT-M, made of AISI 416 stainless steel
C.MEG0003 C.MEG00035 C.MEG0004 C.MEG00045 C.MEG0005 C.MEG00055 C.MEG0006 C.MEG0007 C.MEG0008 C.MEG1503 C.MEG15035 C.MEG1504 C.MEG15045 C.MEG1505 C.MEG15055 C.MEG1506 C.MEG1507
Angle
Flow rate
0°
030
0°
035
0°
040
0°
045
0°
050
0°
055
0°
060
0°
070
0°
080
15°
030
15°
035
15°
040
15°
045
15°
050
15°
055
15°
060
15°
070
Angle
Flow rate
0°
030
0°
035
0°
040
0°
045
0°
050
Code
C.MEG1508 C.MEG2503 C.MEG25035 C.MEG2504 C.MEG25045 C.MEG2505 C.MEG25055 C.MEG2506 C.MEG2507 C.MEG2508 C.MEG4003 C.MEG40035 C.MEG4004 C.MEG40045 C.MEG4005 C.MEG40055 C.MEG4006
Angle
Flow rate
15°
080
25°
030
25°
035
25°
040
25°
045
25°
050
25°
055
25°
060
25°
070
25°
080
40°
030
40°
035
40°
040
40°
045
40°
050
40°
055
40°
060
Angle
Flow rate
H.p. tip nozzles H.p. tip nozzle fitting Kärcher
Code
DT.VHD10003 DT.VHD100035 DT.VHD10004 DT.VHD100045 DT.VHD10005 DT.VHD100055 DT.VHD10006 DT.VHD10007 DT.VHD10008 DT.FUH11503 DT.FUH115035 DT.FUH11504 DT.FUH115045 DT.FUH11505
0°
055
0°
060
0°
070
0°
080
15°
030
15°
035
15°
040
15°
045
15°
050
Code
DT.FUH15055 DT.FUH1506 DT.FUH12503 DT.FUH125035 DT.FUH12504 DT.FUH125045 DT.FUH12505 DT.FUH125055 DT.FUH12506 DT.FUH12507 DT.FUH12508 DT.FUH14003 DT.FUH140035
15°
055
15°
060
25°
030
25°
035
25°
040
25°
045
25°
050
25°
055
25°
060
25°
070
25°
080
40°
030
40°
035
H.p. nozzles, "Quick" H.p quick nozzle: 0° RED
H.p quick nozzle: 25° GREEN
Code
Angle
Flow rate
ES.NOQS-0002.5 0°
025
ES.NOQS-0003 0°
H.p quick nozzle: 15° YELLOW
Code
Angle
Flow rate
ES.NOQS-1502.5 15°
025
030
ES.NOQS-1503 15°
030
ES.NOQS-0003.5 0°
035
ES.NOQS-1503.5 15°
035
ES.NOQS-0004 0°
040
ES.NOQS-1504 15°
040
ES.NOQS-0004.5 0°
045
ES.NOQS-1504.5 15°
045
ES.NOQS-0005 0°
050
ES.NOQS-1505 15°
050
ES.NOQS-0005.5 0°
055
ES.NOQS-1505.5 15°
055
ES.NOQS-0006 0°
060
ES.NOQS-1506 15°
060
ES.NOQS-0007 0°
070
ES.NOQS-1507 15°
070
Code
Angle
Flow rate
H.p quick nozzle: 40° WHITE
Code
Angle
Flow rate
ES.NOQS-2502.5 25°
025
ES.NOQS-4002.5 40°
025
ES.NOQS-2503 25°
030
ES.NOQS-4003 40°
030
ES.NOQS-2503.5 25°
035
ES.NOQS-4003.5 40°
035
ES.NOQS-2504 25°
040
ES.NOQS-4004 40°
040
ES.NOQS-2504.5 25°
045
ES.NOQS-4004.5 40°
045
ES.NOQS-2505 25°
050
ES.NOQS-4005 40°
050
ES.NOQS-2505.5 25°
055
ES.NOQS-4005.5 40°
055
ES.NOQS-2506 25°
060
ES.NOQS-4006 40°
060
ES.NOQS-2507 25°
070
ES.NOQS-4007 40°
070
Copyright© Idrobase Group. All rights reserved.
17
Foam lances CdR foam lance with POM delivery
1L tank - inlet G1/4" F
7
1
2
6 8
Description
CDR.0873-P
CdR foam lance, with 1L tank capacity, inlet G1/4" F
Specifications
1. Micrometric detergent regulator screw with EPDM 70 seal and AISI 303 stainless steel bolt 2. Detergent dispenser made of shock-resistant plastic, AISI 304 stainless steel "duck-bill" foam diffuser, fan spray from 0° to 40° 3. "Lozenge" for producing the foam, made of pressed AISI 304 stainless steel wires 4. 1L polyamide detergent tank with non-deformable increased thread 5. Brass body 6. Nozzle made of AISI 304 SS 7. POM injector housing 8. Tank connector made of POM, which doesn't damage the tank thread
5
3
4
Code
Tech. features • • • • • •
Inlet: G1/4" F Rated pressure: 160bar Working pressure: 180bar Мax flow rate: 20l/min Temperature: 60°C Nozzle: ø1.25mm
Why choose POM?
Differently from brass, POM: • is flexible and resistant: it doesn’t break in the event of accidental falls • doesn’t absorb moisture: in very cold environments moisture can turn into ice, making the plastic very fragile • has a homogeneous and uniform surface: better detergent flow • has a low porosity: it can’t be damaged by contact with chemical products • doesn’t oxidize: oxidised areas may clog the filter over time • doesn’t trigger chemical reactions: improves cleaning and the foaming effect
Brass body > Test result at 150 hours of work
Foam lance with brass body,
POM delivery with M connector type KW + pair of swivel ball quick connections type KW
b
c a
MADE IN ITALY
d
e
ZX.0996-P
b+d+e
ZX.0996-PR
c+d+e
a
CDR.1508
RED50 spray gun, inlet M22x1,5 M, outlet G1/4" F
b
CDR.0001
F swivel ball quick coupling KW type, inlet G1/4" M
c
CDR.7658
REVERSE F swivel ball quick coupling KW type, inlet G1/4" M
d
ZX.0982-P
CdR foam lance, with 1L tank, M inlet connection, KW type
e
AB.0004
M connector type KW, inlet G1/4" F Copyright© Idrobase Group. All rights reserved.
CdR foam kit POM delivery Fitting Kärcher ZX.0993-P Foam lance with brass body, POM delivery with AISI 416 stainless steel M quick + stainless steel and brass ball adapters
a
b
a ZX.0841 + b ZX.0843-P +c ZX.0842
c M galvanised steel ZX.0907-P Foam lance with brass body, POM delivery with galvanised steel M quick coupling CDR.7009
Fitting Kärcher ZX.0994-P Foam lance with brass body, POM delivery with M connector KW type + F ball quick coupling KW type - M22x1,5 F + M connector KW type - M22x1,5 M
a
b
a ZX.0980-P + b ZX.0982-P +c ZX.0981
c M22 Long ZX.0988-L-P Foam lance with brass body, POM delivery with screw quick coupling M22x1,5 M long CDR.7379 suitable for spray guns with extension, also with double O-ring
Fitting Kärcher ZX.1368-P Foam lance with brass body, POM delivery with M22x1,5 F screw quick coupling CDR.7108-S
Copyright© Idrobase Group. All rights reserved.
19
Foam lances CdR foam lance made of brass
With 1L tank - inlet G1/4" F 7
1
2
6
Code
Description
CDR.0873-Q
CdR foam lance, with 1L tank capacity, inlet G1/4" F
Specifications
8
1. Micrometric detergent regulator screw with EPDM 70 seal and AISI 303 stainless steel bolt 2. Detergent dispenser made of shock-resistant plastic, AISI 304 stainless steel "duck-bill" foam diffuser, fan spray from 0° to 40° 3. "Lozenge" for producing the foam, made of pressed AISI 304 stainless steel wires 4. 1L polyamide tank, with non-deformable increased thread 5. Brass body 6. Nozzle made of AISI 304 SS 7. Brass injector housing 8. Brass tank connector
5
3
4
Tech. features • • • • • •
Inlet: G1/4" F Rated pressure: 160bar Working pressure: 180bar Мax flow rate: 20l/min Temperature: 60°C Nozzle: ø1.25mm
Brass foam lance,
with M connector type KW + pair of swivel ball quick couplings KW type
a
b
d
c
e
MADE IN ITALY
ZX.0996-Q
b+d+e
ZX.0996-R-Q
c+d+e
a
CDR.1508
RED50 spray gun, inlet M22x1,5 M, outlet G1/4" F
b
CDR.0001
F swivel ball quick coupling KW type, inlet G1/4" M
c
CDR.7658
REVERSE F swivel ball quick coupling KW type, inlet G1/4" M
d
ZX.0982-Q
CdR foam lance, with 1L tank, M inlet connection, KW type
e
AB.0004
M quick coupling KW type, inlet G1/4" F
M SS ZX.0843-Q Brass foam lance, with AISI 416 stainless steel M quick coupling CDR.7011
Copyright© Idrobase Group. All rights reserved.
CdR foam kit made of brass Fitting Kärcher ZX.0993-Q Brass foam lance, with AISI 416 stainless steel M quick coupling + stainless steel ball adapters
a
b
a ZX.0841+b ZX.0843-Q +c ZX.0842
c M galvanised steel ZX.0907-Q Brass foam lance, with galvanised steel M quick coupling CDR.7009
Fitting Kärcher ZX.0994-Q Brass foam lance,
b with M connector KW type + a F
ball quick coupling KW type - M22x1,5 F+
a
b
c M connector KW type - M22x1,5 M a ZX.0980+b ZX.0982-P +c ZX.0981
c M22 Long ZX.0988-L-Q Brass foam lance, with screw quick coupling M22x1,5 M long CDR.7379 suitable for spray guns with extension, also with double O-rings
Fitting Kärcher ZX.1368-Q Brass foam lance, with screw quick coupling M22x1,5 F CDR.7108-S
Copyright© Idrobase Group. All rights reserved.
21
Foam lances CdR foam lance S.S. body
MADE IN ITALY
With 1L tank - inlet G1/4" F
Code
7
1
Description
CDR.0873-SS
6
2
8
CdR foam lance, AISI 304 stainless steel body, with 1L tank, inlet G1/4" F
Specifications
1. Micrometric detergent regulator screw with EPDM 70 seal and AISI 303 stainless steel bolt 2. Detergent dispenser made of shock-resistant plastic, AISI 304 stainless steel "duck-bill" foam diffuser, fan spray from 0° to 40° 3. "Lozenge" for producing the foam, made of pressed AISI 304 stainless steel wires 4. 1L polyamide tank, with non-deformable increased thread 5. AISI 304 stainless steel body 6. Nozzle made of AISI 304 SS 7. POM injector housing 8. Tank connector made of POM, which doesn't damage the tank thread
5 3
4
Tech. features • • • • • •
Inlet: G1/4" F Rated pressure: 160bar Working pressure: 180bar Мax flow rate: 20l/min Temperature: 60°C Nozzle: ø1.25mm
Foam lance SS body,
POM delivery with M connector type KW + pair of swivel ball quick connections type KW
e
b c a
a b c d e f
ZX.0996-SS ZX.0996-BSS ZX.0996-RSS CDR.1503-B CDR.0001-SS CDR.0001 CDR.7658 ZX.0982-SS AB.0004
f
d
b+e+f c+e+f d+e+f
BLUE25 spray gun, inlet M22x1,5 M, outlet G1/4" F AISI 303 stainless steel F swivel ball quick coupling KW type , inlet G1/4" M F swivel ball quick coupling KW type, inlet G1/4" M REVERSE F swivel ball quick coupling KW type, inlet G1/4" M CdR foam lance AISI 304 stainless steel body, with 1L tank, inlet M connector KW type M quick coupling KW type, inlet G1/4" F
ZX.0843-SS
ZX.0988-L-SS
ZX.1368-SS
Foam lance with AISI 304 stainless steel body, AISI 416 stainless steel M quick coupling CDR.7011
Foam lance with AISI 304 stainless steel body, with screw quick coupling M22x1,5 M long CDR.7379 suitable for spray guns with extension, also with double O-rings
Foam lance with AISI 304 stainless steel body, screw quick coupling M22x1,5 F CDR.7108-S
Copyright© Idrobase Group. All rights reserved.
Foam lances A-Kit Lavaggio
• A-Kit Lavaggio ECO Kit of accessories for companies that required infrequent washing. Stainless steel ball quick couplings, foam lance with POM delivery A-Kit Lavaggio PROFY Kit of accessories for cleaning professionals. Swivel ball quick couplings, foam lance with POM delivery A-Kit Lavaggio SS Kit of accessories for continuous use with aggressive detergents. Spray gun AISI 304 stainless steel swivel ball coupling, M connectors M KW type for lances, foam lance with AISI 304 stainless steel body. All the versions of A-Kit Lavaggio are supplied in the innovative display packaging
A-Kit Lavaggio ECO
b
a a b c
c
ZX.7233 ZX.7230 ZX.7231-25045 ZX.0843-P
a+b+c
ECO spray gun, inlet M22x1,5 M, AISI 304 stainless steel F outlet Lance 650mm stainless steel M quick inlet AISI 416, nozzle 25°, flow rate 045 Foam lance with brass body, POM delivery, stainless steel M quick inlet
A-Kit Lavaggio PROFY
b
a
c
MADE IN ITALY
a b c
ZX.7234 ZX.1403 ZD.25045-C65K ZX.0982-P
a+b+c
RED 25 spray gun, inlet M22x1,5 M, F swivel ball outlet KW type CdR 80 lance, 650mm M quick inlet KW type, nozzle 25°, flow rate 045 Foam lance with brass body, POM delivery, M quick inlet KW type
A-Kit Lavaggio inox
b
a MADE IN ITALY
a b c
ZX.7235 ZX.1403 ZD.25045-C65K ZX.0982-P
a+b+c
c
MADE IN ITALY
BLUE25 spray gun, inlet M22x1,5 M, outlet AISI 303 stainless steel F swivel ball outlet KW type CdR 80 stainless steel lance, 650mm M quick inlet KW type, nozzle 25°, flow rate 045 Foam lance with AISI 304 stainless steel body, POM delivery, M quick inlet KW type
Copyright© Idrobase Group. All rights reserved.
23
Car Wash H.p. foam kit for fixed high pressure washer systems
MADE IN ITALY
b c
Code
a
Description
a
CDR.1269
High pressure foam device
b
ZX.1410
RED50 spray gun, inlet G3/8" F, outlet F swivel ball KW type
c
ZX.1135
Foam lance 510mm, inlet M connection KW type
high pressure foam device 100÷200bar is a very a The compact foam dispenser operating at high pressure that in combination with the foam lance makes it possible to operate very economically with minimum detergent use. • Detergent suction system: Venturi • Water flow rate: max 21l/min • Maximum pressure: 200bar • Maximum temperature: 95°C • Area treated per minute: approx. 70 m² • Percentage of foam detergent suctioned: 0.1 to 10 % • Device dimensions: 150 x 125 x 50mm (WxHxL) • Device material: AISI 304 stainless steel • Venturi system material: AISI 316 stainless steel
Equipment
• Two stainless steel ball quick couplings • 1500mm suction hose with filter • SS dosage regulator
Technical features of h.p. hose to be used with high pressure foam device: • 5/16" - max 10m length • 3/8" - max 30m length
b RED50 spray gun for continuous use, ergonomic design. steel foam lance covered in shock-proof plastic and c Stainless equipped with a special device for foam production and fan spray nebulising nozzle. Complete with M connector M KW type.
Use
Ideal for all high pressure systems from 100÷200bar. The combination with the dosing unit allows for very economical operation with minimal detergent consumption
WARNING !!! Not suitable for use with aggressive chemicals or inflammable liquids
Copyright© Idrobase Group. All rights reserved.
club dei riparatori The winning solution to manufacture and repair all kinds of pressure washers
CopyrightŠ Idrobase Group. All rights reserved.
25
Double life is the 24L nebuliser for detergents with plastic-coated tank Club dei Riparatori presents a worldwide exclusive Double life, the 24 litre detergent nebuliser with a tank painted inside with epoxy plastic-coating, the real pride and joy of the line. The difference compared to a normal tank lies in the epoxy plastic-coating on the internal surface of the nebuliser tank. This means that the tank is isolated from the chemical product and is not affect by the chemical agents in the detergent, thus prevent oxidation and the formation of rust. What are the benefits? First of all the life of the tank, which is double that of a normal tank. The composition of the detergent does not undergo any alterations resulting from oxidation and/or rust. Especially recommended for professional use in car washes thanks to the product's guaranteed longevity.
CopyrightŠ Idrobase Group. All rights reserved.
Nebulisers: our advantages The 24 litre detergent nebuliser (Code: 8.2002S / 8.2004S / 8.2002-YS / 8.2004-YS) with tank painted inside with epoxy plastic-coating. The tank is isolated from the chemical product and is not affect by the chemical agents in the detergent.
Cap made of POM, detergent resistant
What are the advantages? • The life of the tank is double compared to a standard tank • The detergent does not undergo any change in its composition caused by oxidation and/or rust • The nozzle doesn't clog
Anti-overflow ring
AISI 304 stainless steel thread where the cap is screwed on
Safety valve in accordance with European Directive 97/23/CE Precision air pressure regulator (foam version) with protective galvanisation
Plastic-coated tank for 24 litre painted versions (COD: 8.2002S/8.2004S/8.2002YS/8.2004-YS)
Red indicator light for detergent level
Tank in accordance with European Directive 97/23/CE
Copyright© Idrobase Group. All rights reserved.
Dimensions designed for saving The sizing of our nebulizers has been specially designed to optimise the bulk, thus ensuring a considerable savings in transport
27
Nebulisers Spray and foam nebuliser
24L painted inside with epoxy plastic-coating Spray
Code
Model
Colour
8.2002S
Airspray 24-RS Double life
Red
8.2002-YS
Airspray 24-YS Double life
Yellow
Airspray 24 (8.2002S, 8.2002-YS) equipment:
Spray gun (internal parts *Viton® + SS), 600mm, SS lance with brass fan spray nozzle, pressure gauge, safety valve, ball valve, 10m Rilsan spiral hose with anti-twist connection. Max pressure, 8bar
Foam 8.2004S
Airfoam 24-RS Double life
Red
8.2004-YS
Airfoam 24-YS Double life
Yellow
Airfoam 24 (8.2004S, 8.2004-YS) equipment:
Spray gun (internal parts *Viton® + SS), 600mm, SS lance with 1 foam fan spray nozzle, pressure gauge, safety valve, manual release valve and air pressure regulator, air suction valve, detergent suction valve, ball valve, 10m nylon hose. Max pressure 8bar
50L in painted steel Spray
MADE IN ITALY
Code
Model
Colour
8.2003
Airspray 50-R
Red
8.2003-Y
Airspray 50-Y
Yellow
Airspray 50 (8.2003, 8.2003-Y) equipment:
Spray gun (internal parts *Viton® + SS), 900mm with brass fan spray nozzle, pressure gauge, safety valve, ball valve, 10m Rilsan spiral hose with anti-twist connection. Max pressure 8bar
Foam 8.2009
Airfoam 50-R
Red
8.2009-Y
Airfoam 50-Y
Yellow
Airfoam 50 (8.2009, 8.2009-Y) equipment: The CdR Airspray and Airfoam nebulisers are made of 2,5mm painted steel. Recommended for professional use WARNING!!! They are not suitable for use with aggressive chemical products, flammable liquids and/or detergents with pH other than 5
*VITON® is a registered trademark of Dupont
Spray gun (internal parts *Viton® + SS), 900mm, SS lance with 1 foam fan spray nozzle, pressure gauge, safety valve, manual release valve and air pressure regulator, air suction valve, detergent suction valve, ball valve, 10m nylon hose. Max pressure 8bar
Copyright© Idrobase Group. All rights reserved.
Nebulisers Air spray and air foam nebuliser
MADE IN ITALY
100L made of painted steel
Spray
Code
Model
Colour
8.2001
Airspray 100-R
Red
8.2001-Y
Airspray 100-Y
Yellow
Airspray 100 (8.2001, 8.2001-Y) equipment:
Spray gun (internal parts Viton® + SS), 600mm, lance with brass fan spray nozzle, pressure gauge, safety valve, ball valve, 10m Rilsan spiral hose with anti-twist connection. Max pressure 8bar
Foam 8.2010
Airfoam 100-R
Red
8.2010-Y
Airfoam 100-Y
Yellow
Airfoam 100 (8.2010, 8.2010-Y) equipment: The CdR Airspray and Airfoam nebulisers are made of 2,5mm painted steel. Recommended for professional use WARNING!!! They are not suitable for use with aggressive chemical products, flammable liquids and/or detergents with pH other than 5
Spray gun (internal parts Viton® + SS), 600mm, SS lance with 1 foam fan spray nozzle, pressure gauge, safety valve, manual release valve and air pressure regulator, air suction valve, detergent suction valve, ball valve, 10m nylon hose. Max pressure 8bar
200L made of painted steel Spray
Code
Model
Colour
8.2013
Airspray 200-R
Red
8.2013-Y
Airspray 200-Y
Yellow
Airspray 200 (8.2013, 8.2013-Y) equipment:
Spray gun (internal parts Viton® + SS), 600mm, lance with brass fan spray nozzle, pressure gauge, safety valve, ball valve, 10m Rilsan spiral hose with anti-twist connection. Max pressure 8bar
Foam 8.2014
Airfoam 200-R
Red
8.2014-Y
Airfoam 200-Y
Yellow
Airfoam 200 (8.2014, 8.2014-Y) equipment: The CdR Airspray and Airfoam nebulisers are made of 2,5mm painted steel. Recommended for professional use WARNING!!! They are not suitable for use with aggressive chemical products, flammable liquids and/or detergents with pH other than 5
Copyright© Idrobase Group. All rights reserved.
Spray gun (internal parts Viton® + SS), 600mm, SS lance with 1 foam fan spray nozzle, pressure gauge, safety valve, manual release valve and air pressure regulator, air suction valve, detergent suction valve, ball valve, 10m nylon hose. Max pressure 8bar
*VITON® is a registered trademark of Dupont
29
Nebulisers Air spray and air foam nebuliser 24L stainless steel
Spray
Code
Model
8.2007
Airspray SS 24
Airspray SS 24 equipment:
Spray gun (internal parts Viton® + SS AISI 316), 600mm SS lance with brass fan spray nozzle, pressure gauge, safety valve, ball valve, 10m Rilsan spiral hose with anti-twist connection. Max pressure 8bar
Foam 8.2006
Airfoam SS 24
Airfoam SS 24 equipment: The CdR Airspray SS and Airfoam SS nebulisers are made of AISI 304 stainless steel. Recommended for professional use WARNING!!! They are not suitable for use with aggressive chemical products, flammable liquids and/or detergents with pH other than 5
Spray gun (internal parts Viton® + INOX AISI 316), 600mm SS lance with 1 foam fan spray nozzle, pressure gauge, safety valve, manual release valve and air pressure regulator, air suction valve, detergent suction valve, ball valve, 10m nylon hose. Max pressure 8bar
50L in acciaio inox Spray
Code
Model
8.2008
Airspray SS 50
MADE IN ITALY
Airspray SS 50 equipment:
Spray gun (internal parts Viton® + SS AISI 316), 900mm SS lance with brass fan spray nozzle, pressure gauge, safety valve, ball valve, 10m Rilsan spiral hose with anti-twist connection. Max pressure 8bar
Foam 8.2005
Airfoam SS 50
Airfoam SS 50 equipment:
Spray gun (internal parts Viton® + INOX AISI 316), 900mm SS lance with 1 foam fan spray nozzle, pressure gauge, safety valve, manual The CdR Airspray SS and Airfoam SS are made of 2,5mm painted steel. Recommended release valve and air pressure regulator, air suction valve, detergent for professional use suction valve, ball valve, 10m nylon hose. Max pressure 8bar WARNING!!! They are not suitable for use with aggressive chemical products, flammable liquids and/or detergents with pH other than 5
*VITON® is a registered trademark of Dupont
Copyright© Idrobase Group. All rights reserved.
Car Wash Sprayers A-Spruzzo Extreme The A-Spruzzo Extreme sprayers are designed for most heavy-duty jobs. Ideal for use in car washes to clean alloy wheels, in factories and in body shops. The acidresistant lance and the seals made of *VITON®, together with a tank that is highly resistant to high pressures, all guarantee the long life of the equipment.
Adjustable swivel nozzle
High-efficiency pump for minimum effort Safety valve
Telescopic acidresistant lance 7001350mm
Seals made of *Viton®
Spray gun with internal filter
Code
CDR.1800-7P CDR.1800-9P CDR.1800-12P
Capacity
Height
Diameter
Pressure
7L
470mm
220mm
4bar
9L
570mm
220mm
4bar
12L
600mm
220mm
4bar
Spare parts for A-Spruzzo Extreme 7-9-12L
a
b Code
c
Inlet
a
CDR.1800-SP
Repair kit made of Viton® for A-Spruzzo Extreme 7-9-12L
b
CDR.1803
Gun with telescopic lance, 700-1350mm
c
CDR.1800-H
1,7m hose for sprayer 7-9-12L
d
CDR.1800-N15
Complete nozzle, ø1,5mm, with seal made of *Viton®
e
CDR.1800-V
Safety valve
d
e
A-Spruzzo Strong
A-Spruzzo Active
A-Spruzzo Strong 1,5 and 2L are ideal to use in car washes for cleaning alloy wheels, in factories and body shops.
The A-Spruzzo Active 0,5 and 1L are ideal for nebulising detergents formulated for car interior finishes or products for protecting seals.
Safety valve
Ergonomic form
Adjustable swivel nozzle Translucent tank for easy visibility of the liquid level Code
CDR.1801-15P CDR.1801-20P
Capacity
Height
Diameter
Pressure
1,5L
310mm
130mm
4bar
2L
340mm
130mm
4bar
CDR.1801-SP
CDR.1800-N15
Repair kit for A-Spruzzo Strong 1,5 e 2L
Complete nozzle ø1,5mm, with seal made of *VITON®
Copyright© Idrobase Group. All rights reserved.
Nozzle adjustable by means of an excellent lowdrop system
Scale in litres and US gallons
Translucent tank for easy visibility of the liquid level
Code
CDR.1802-05P CDR.1802-10P
Capacity
Height
Diameter
0,5L
220mm
100mm
1L
275mm
115mm
*VITON® is a registered trademark of Dupont
31
Car Wash A-Vortice Acid-proof chromium plating
Plastic rotating pipe
Code
Description
ZX.7220-R
A-Vortice Classico Gun for cleaning car interiors, powered by compressed air. Steel body, pressure range 6-9,2bar; M quick coupling inlet; plastic rotating pipe, 1L tank capacity, detergent suction filter. Idromoq (10L)
Regulator that enables precise detergent dosing
Entry angled at 45° to facilitate use
CDR.1703-10
Detergent for deep cleaning all the fabric surfaces of the car such as seats, carpets, door panels and floor mats.
Code
Description
ZX.7222
A-Vortice Schiuma Foam gun for cleaning car exteriors and mechanical parts. Powered exclusively by compressed air, 6-9,2bar; M quick coupling. Supplied with two tips for jet with different angles. Working pressure 7bar, tank 1L.
Code
Description
ZX.7223
A-Vortice Metallo Black Gun for cleaning car interiors, powered by compressed air. Body made of steel, pressure range 6-9bar; M quick coupling inlet; metal rotating pipe, 1L tank capacity, detergent suction filter.
Acid-proof chromium plating
Regulator that enables precise detergent dosing Air inlet regulator
Aluminium rotating pipe
Regulator that enables precise detergent dosing
Aluminium rotating pipe
Regulator that enables precise detergent dosing
A-Vortice can not be sold in Japan and in the USA
Idromoq (10L)
Comfortable ergonomic grip
CDR.1703-10
Detergent for deep cleaning all the fabric surfaces of the car such as seats, carpets, door panels and floor mats.
Code
Description
ZX.7223-R
A-Vortice Metallo Gun for cleaning car interiors, powered by compressed air. Steel body, pressure range 6-9,2bar; M quick coupling inlet; metal rotating pipe, 1L tank capacity, detergent suction filter. Idromoq (10L)
CDR.1703-10
Detergent for deep cleaning all the fabric surfaces of the car such as seats, carpets, door panels and floor mats. CopyrightŠ Idrobase Group. All rights reserved.
Car Wash A-Vortice Classico - parts map 1 2
3 4
5
6
ZX.7221
ZX.7225
Service kit for A-Vortice Classico ZX.7220 old version
Service kit for other similar guns powered by compressed air
G1/4" M
G1/4" M
G1/4" M
G1/8" M
quantity 4x1
quantity 4x1
Spare parts list Code
Description
Quantity
1
CDR.7676
Lance extension
1
2
CDR.7678
Rotating pipe with fitting
2
CDR.7677
Inner pipe with connection G1/4" M-M
1
CDR.7677-W
Inner pipe with connection G1/4" M - G1/8" M
1
4
CDR.010017K
Ball valve
1
5
CDR.7684
Suction pipe with filter
1
6
CDR.7679
Tank 1L
1
3
Copyright© Idrobase Group. All rights reserved.
ZX.7221
ZX.7225
• • •
• • •
A-Vortice can not be sold in Japan and in the USA
33
Car Wash A-Vortice ARIA
A-Vortice ARIA TURBO
Entry angled to facilitate use
Detail of the air intake of the A-Vortice ARIA TURBO
Code
Description
ZX.7227
Gun for cleaning car interiors and mechanical parts. Used with compressed air at 3 to 7bar from a standard compressor. A-Vortice ARIA TURBO does not have the detergent bottle or the rotating pipe but is equipped with a Turbo extension. A-Vortice ARIA TURBO features a Venturi system that sucks fresh air from the outside, increasing the quantity of air blown by the gun.
A-Vortice ARIA ROTANTE
Entry angled to facilitate use Detail of the rotating pipe
Code
Description
ZX.7226
Gun for cleaning car interiors and mechanical parts. A-Vortice ARIA ROTANTE is used with compressed air from a standard compressor at 3 to 7bar; it is an A-Vortice Classico but without the detergent bottle and thus without the intake pipe; the cone is made of anodised aluminium with the classic rotating pipe inside.
A-Vortice can not be sold in Japan and in the USA
CopyrightŠ Idrobase Group. All rights reserved.
Car Wash A-Vortice ARIA PLUS
A-Vortice ARIA TURBO PLUS Gun cap for lubricating the internal components Detail of the air intake of the A-Vortice ARIA TURBO PLUS
Surface treatment that protects against corrosion and atmospheric agents
Entry angled to facilitate use
Code
Description
ZX.7229
Gun for cleaning car interiors and mechanical parts that are difficult to reach. Used with compressed air from 3 to 7bar from a standard compressor. A-Vortice ARIA TURBO PLUS does not have the detergent bottle or the rotating pipe, but it is equipped with a Turbo extension. A-Vortice ARIA TURBO PLUS features a Venturi system that sucks fresh air from the outside, increasing the volume of air inside the gun. Before going out, the air is channelled into a chamber in the form of a gun barrel that "rolls" it over, thus enabling the turbo air flow to maintain its compactness and pressure even at 20-30 centimetres from the outlet nozzle.
A-Vortice ARIA ROTANTE PLUS Gun cap for lubricating the internal components
Detail of the rotating pipe with rotation speed of 3000rpm
Surface treatment that protects against corrosion and atmospheric agents
Code
Description
ZX.7228
Gun for cleaning car interiors and mechanical parts. A-Vortice ARIA ROTANTE PLUS is used with compressed air from a standard compressor at 3 to 7bar. It is an A-Vortice Classico but without the detergent bottle and thus without the intake pipe; the cone is made of shockproof plastic, preventing any damage to the car body. The classic rotating pipe is situated inside the outlet cone. The characteristics of the A-Vortice ARIA ROTANTE PLUS enable thorough cleaning of the surfaces of the car that are the smallest and narrowest and thus difficult to clean.
CopyrightŠ Idrobase Group. All rights reserved.
A-Vortice can not be sold in Japan and in the USA
35
Car Wash Wet vacuums Eolo and spare parts
Eolo
MADE IN ITALY
Professional vacuum cleaner featuring an exclusive technology that enables it to be used simultaneously with a pneumatic tool. Used in combination with A-Vortice Aspira, it allows you to remove dirt embedded inside the vehicles in just a few minutes Accessories included
Hose 4,5m
USE IN COMBINATION
QUICK COUPLINGS
with air compressor
Model
IB.2027
in inlet and outlet compressed air
n° Motors
1 - two-stage high speed by-pass
Eolo
Waterlift
2400mm
DOUBLE FILTER
FLEXIBLE HOSE
in polyester and nylon
Air intake
215m³/h
Drum capacity
36L
With integrated compressed air hose for maximum ease of handling
Max power
Dimensions WxLxH
1,4kW (1x230V-50/60Hz)
400 x 400 x 750mm
Eolo spare parts 250
340
CDR.1648
Polyester filter, ø340mm
CDR.1737
Flexible hose, 4,5mm, ø29/36mm, with integrated air tube
CDR.1649
Nylon filter, ø340mm
CDR.1003
Flat lance, ø36mm, 210mm
CDR.1736
Sponge filter for liquids
CDR.1740
Wet vacuum motor
200mm
A-Vortice can not be sold in Japan and in the USA
Copyright© Idrobase Group. All rights reserved.
Car Wash A-Vortice Aspira
A-Vortice ASPIRA
An innovative accessory for cleaning the seats, floor mats, and carpet of the car. With just one pass, A-Vortice ASPIRA performs two actions simultaneously: with the compressed air blown by the rotating cone, it brings the dirt to the surface and eliminates it through the suction nozzle The Vortex of cleaning
Thanks to the vortex of compressed air, the dirt particles are separated from the surface where they were embedded
Two in one
Combined action compressed air suction motor
A magnet for dirt
The sucking action of Eolo attracts the dirt that is deeply embedded
of and
ZX.7232 A-Vortice ASPIRA, accessory for cleaning car interiors, powered by compressed air 6-7bar. Air consumption 6,3bar: 270l/min. Accessory composed of: 2 adapters 26 to 36mm (a); body with rotating cone (b); 2 nozzles (c); pipe 3m ø6x4mm; 5 plastic clips (e)
c
a
a
b
c
d
e
Operation of Eolo with A-Vortice ASPIRA
Connect A-Vortice ASPIRA to the flexible hose of Eolo and hook up the compressed air to the ball quick coupling CopyrightŠ Idrobase Group. All rights reserved.
Select automatic operation on the Eolo wet vacuum cleaner
Start up the compressed air and the suction by rotating the lever of the A-Vortice ASPIRA
Proceed with the professional interior cleaning
A-Vortice can not be sold in Japan and in the USA
37
Car Wash Wet vacuum
MADE IN ITALY
Pulito 3 Pulito 4 Pulito 2 Pulito 5 Pulito 6 Pulito 7
Model
n° Motors
Waterlift
Air intake
Tank Accessories ø Max power capacity
Dimensions WxLxH
IB.2015
Pulito 2
1 - single-stage high speed by-pass
2230mm
237m³/h
18L
36mm
1,5kW (1x230V-50/60Hz)
400 x 400 x 660mm
IB.2017
Pulito 4
1 - single-stage high speed by-pass
2230mm
237m³/h
26L
36mm
1,5kW (1x230V-50/60Hz)
400 x 400 x 740mm
IB.2016
Pulito 3
1 - single-stage high speed by-pass
2230mm
237m³/h
62L
38mm
1,5kW (1x230V-50/60Hz)
520 x 520 x 1000mm
IB.2018
Pulito 5
2 - single-stage high speed by-pass
2230mm
475m³/h
62L
38mm
2,8kW (1x230V-50/60Hz)
580 x 720 x 980mm
IB.2019
Pulito 6
3 - single-stage high speed by-pass
2230mm
710m³/h
62L
38mm
3,5kW (1x230V-50/60Hz)
580 x 720 x 980mm
IB.2020
Pulito 7
2 - two-stage high speed by-pass
3115mm
370m³/h
62L
38mm
3,5kW (1x230V-50/60Hz)
580 x 740 x 970mm
The data on waterlift and air flow refer to single motors
Accessories ø36mm included
Accessories ø38mm included
Hose 2m Hose 2,5m
Copyright© Idrobase Group. All rights reserved.
Car Wash Wet vacuum spare parts
MADE IN ITALY
Pulito 2
Pulito 4
Pulito 3
Pulito 5
IB.2015
IB.2017
IB.2016
Complete flexible hose as standard equipment
ZX.1007-C
ZX.1007-C
ZX.1004-SW ZX.1004-SW ZX.1004-SW ZX.1004-SW (2,5m)
(2,5m)
(2,5m)
(2,5m)
Flexible hose 30m coil without tool adapters
CDR.1024
CDR.1024
CDR.1025
CDR.1025
CDR.1025
CDR.1025
Rigid threaded tool adapter for flexible hose, with neck on tank side
CDR.1009
CDR.1009
CDR.1040
CDR.1040
CDR.1040
CDR.1040
CDR.1020
CDR.1020
CDR.1020
CDR.1020
Rigid threaded tool adapter, for flexible hose, with swivel connection inlet on accessory side
-
(2m)
-
IB.2019
Pulito 7
Description
(2m)
IB.2018
Pulito 6
IB.2020
Handle with air regulator, 280mm, swivel inlet for flexible hose
CDR.1006
CDR.1006
CDR.1543
CDR.1543
CDR.1543
CDR.1543
Flat lance
CDR.1003
CDR.1003
CDR.1017
CDR.1017
CDR.1017
CDR.1017
Dusting brush
CDR.1002
CDR.1002
CDR.1016
CDR.1016
CDR.1016
CDR.1016
Upholstery attachment
CDR.1001
CDR.1001
Reduction for accessories
-
-
-
-
-
-
CDR.1539
CDR.1539
CDR.1539
CDR.1539
Extension wand
CDR.1004
CDR.1004
CDR.1540
CDR.1540
CDR.1540
CDR.1540
Multipurpose nozzle
CDR.1011 + CDR.1013
CDR.1011 + CDR.1013
CDR.1541
CDR.1541
CDR.1541
CDR.1541
Multipurpose nozzle for liquids
CDR.1011 + CDR.1014
CDR.1011 + CDR.1014
CDR.1542
CDR.1542
CDR.1542
CDR.1542
Combined multipurpose nozzle
CDR.1047
CDR.1047
Polyester filter
CDR.1645
CDR.1645
CDR.1646
CDR.1646
CDR.1646
CDR.1646
Basket for polyester filter
CDR.1643
CDR.1643
CDR.1644
CDR.1644
CDR.1644
CDR.1644
Motor for dust and liquid vacuum cleaners
CDR.1240
CDR.1240
CDR.1240
CDR.1240
CDR.1240
CDR.1647
CopyrightŠ Idrobase Group. All rights reserved.
-
-
-
-
39
Car Wash Carpet cleaner
MADE IN ITALY
Lavabene 4
Ideal for cleaning the interiors of medium/ small vehicles such as cars and vans. Equipped with tank for the clean water inside the polyethylene drum.
Accessories included
Hose 2m Model
IB.0013
Lavabene 4
n° Motors
1 - twostage
Pump power
Flow rate
48W
0,8l/min
Pump pressure
2bar
Drum capacity
27L
Detergent Max power drum
6,2L
1,2kW (1x230V-50/60Hz)
Dimensions WxLxH
400 x 400 x 600mm
Lavabene 5
Professional vehicle interior cleaner ideal for thorough cleaning of coaches and busses. Easy to use, equipped with a steel drum and dirty water drain on the side.
Accessories included
Hose 2,5m Model
IB.0014
Lavabene 5
n° Motors
2 - twostage
Pump power
48W
Flow rate Pump pressure
0,8l/min
2bar
Air flow
340m³/h
Drum Detergent capacity drum
60L
25L
Max power
1,2kW (1x220/240V 50/60Hz)
Dimensions WxLxH
600 x 700 x 920mm
Copyright© Idrobase Group. All rights reserved.
Car Wash Professional vacuum cleaner
MADE IN ITALY
Puliturbo
Professional vacuum cleaner equipped with a motor combined by belt with a turbine. A practical solution, handy and easy use, suitable for continuous work. Can be used for thorough cleaning of busses, in repair garages, and in combination with machines that carry out machining operations on metal and plastic. With manual filter shaker on the side.
Accessories included Hose 4,5m
2x Model
n° Motors
Air flow
Waterlift
Drum capacity
Filter surface Max power
Dimensions WxLxH
IB.0015
Puliturbo 1
1 - threestage turbine
350m³/h
2100mm
60L
7000cm³
2,2kW (1x230V-50/60Hz)
1200 x 600 x 1100mm
IB.0016
Puliturbo 2
1 - threestage turbine
350m³/h
2630mm
60L
7000cm³
3kW (3x400V-50/60Hz)
1200 x 600 x 1100mm
Copyright© Idrobase Group. All rights reserved.
41
Car Wash Interior products display
MADE IN ITALY
g
a
b f c
e
d
Code
Description
Complete wall display unit, composed of: • no. 1 wall display unit (d) • no. 50 carpet protector mats 400 x 500mm • no. 50 polyester seat covers • no. 1 dispenser with st. wheel cover film (c) • no. 50 st.wheel covers in non-woven fabric (f) • no. 50 gearshift covers in non-woven fabric (f)
a
ZX.B2AA2
b
CDR.1813-5
c
CDR.1813
d
CDR.1810
Blue wall display unit. Also available in red or grey on request
e
CDR.1815-13
Seat cover 700 x 1650mm in white polyester 13mcr, package of 250 pieces. Available in other thicknesses on request
f
CDR.1814
Steering wheel and gearshift covers made of non-woven fabric. Package contains 50 steering wheel covers and 50 gearshift covers
g
CDR.1811-70
Carpet protector mats, 450 x 500mm, thickness 70g, package of 250 pieces Available in other thicknesses/sizes on request
Handle with 5 reels of stretch film for covering steering wheel and gearshift. Handle for stretch film reels
Copyright© Idrobase Group. All rights reserved.
Car Wash Dosing pumps
Water powered dosing pump
Code
Dosage percentage
CDR.1437
0,3% - 2%
CDR.1438
0,4% - 4%
Dosing pump for car wash • connection: 3/4" BSPT • water pressure: 0,2-8bar • flow rate: 10-2500l/h
Material:
• Seal made of *Viton® and O-Ring made of Aflas • Spring made of Hastelloy, highly resistant to corrosion • Body in polyamide reinforced with 30% fiberglass
Features & benefits: Power supply: water
Analogue dosing pump
• Extremely precise product dosing • It works with just the water pressure • Very easy maintenance
Code
Seal
Ideal for
CDR.1409
*VITON®
Wax
CDR.1410
Dutral
Shampoo
Analogue dosing pump
protection rating IP65, max flow rate 4l/h at 10bar. Propylene housing reinforced with fiberglass, ceramic double ball valves.
Complete with:
• Foot valve for production suction • Injection valve • Delivery pipe ø4x6mm • Suction/discharge pipe ø4x6mm Digital version available on request
Power supply: electricity MADE IN ITALY
Pneumatic dosing pump
Code
Seal
Ideal for
CDR.1413
*VITON®
Wax
CDR.1414
Dutral
Shampoo
Pneumatic dosing pump,
max flow rate 4l/h at 10bar. Polypropylene housing, ceramic double ball valves, air supply pressure 6/8bar, air inlet for pipe ø6x8mm, solenoid valve 24V-50/60Hz with connector. Can be installed horizontally, on the wall, DIN rail.
Complete with:
• Foot valve for production suction • Injection valve • Delivery pipe ø4x6mm • Sucking/discharge pipe ø4x6mm Power supply: air MADE IN ITALY
Copyright© Idrobase Group. All rights reserved.
*VITON® is a registered trademark of Dupont
43
Car Wash
O3 Car Purifier
MADE IN ITALY
Intake louver Outtake louver Ozone
Start/Stop Battery charger connector
Work settings switch
ON/OFF O3 Car Purifier
Sanitize and purify your car O3 Car Purifier is particularly suitable for sanitising and deodorising cars and vans. With its power to destroy the concentrations of fungi, mites, bacteria, and viruses and the molecules perceived by the sense of smell in general, ozone is well known for its sanitizing and deodorizing properties.
Depending on the dimensions of the space to be treated and the conditions of odour pollution, the duration of the treatment can be chosen between: 20, 40, 60 and 120 minutes
The battery is designed to last for about eight hours of treatment
When the battery is completely discharged, it takes about 12 hours to fully recharge
Caution: always keep people and animals out of the space during treatment.
Technical data Code
Model
Ozone Generator
CDR.1761
O3 CAR PURIFIER
100mg/h
Battery
12V-7Ah Lasts 8h continuous
Electrical Power
Electrical Supply
Dimensions
10W
12Vdc
80 x 160 x 150mm
CopyrightŠ Idrobase Group. All rights reserved.
Car Wash
Kit Life Car
MECHANICAL does not require electricity
Kit Life Car The dosing system for Car Washes,self-service and automatic washing, bus and truck washing. Ideal for introducing detergents and waxes into the water stream for cleaning vehicle bodies, alloy wheels, motors and mechanical parts.
Operating principle
Potable water
Pressure regulator
Filter 200Mesh/80microns
The Life Car dosing system, directly connected to the water supply line, uses the water pressure to activate the dosing system, sucks the concentrated product and mixes it with water according to the required percentage (which can be set by the operator). The resulting solution is sent to the lines connected to the system. The Life Car dosing system is completely mechanical, guaranteeing precision and regularity.
Safety valve
Tank with concentrated product
Technical data Code
Model
Fl. rate
Pressure
% dosage
Concentrated product consumption
ZX.1707
Light Car
10 to 2500l/h
0,3 to 6bar
from 0,2 to 2
0,02 to 50l/h
ZX.1708
Extreme Car
10 to 2500l/h
0,3 to 6bar
1 to 5
0,1 to 125l/h
Life Car advantages
Components
• The easiest and most convenient method for professional washing
• 1 pressure stabiliser
• Reduction of personnel costs and time required
• 1 10" filter, with washable cartridge 50microns + pressure gauge
• Reduction of maintenance costs
• 1 Dosatron
• Extreme precision in concentrated product dosing
• 1 PVC ball valve for line closing
• No risk of dosing errors
• 1 suction hose for chemicals
• Less product wasted
• 10m PVC hose
• 1 stainless steel nozzle, ang. 110°, flow rate 030
• 1 gun with 600mm SS lance Copyright© Idrobase Group. All rights reserved.
45
Car Wash Solenoid valves
MADE IN ITALY
IT.0400-24
IT.0400-230
IT.0401-24
Solenoid valve brass body with plug, NC, G3/8"F-F, 24V, 16bar, seal FKM, IP65
Solenoid valve brass body with plug, NC, G3/8"F-F, 230V, 16bar, seal FKM, IP65
Solenoid valve brass body with plug, NC, G1/2" F-F, 24V, 16bar, seal FKM, IP65
Water temperature -10 to +130°C
Water temperature -10 to +130°C
Water temperature -10 to +130°C
IT.0401-230
IT.0402-24
IT.0403-24
Solenoid valve brass body with plug, NC, G1/2" F-F, 230V, 16bar, seal FKM, IP65
Solenoid valve brass body with plug, NC, G3/4" F-F, 24V, 16bar, seal FKM, IP65
Solenoid valve brass body with plug, NC, G1" F-F, 24V, 16bar, seal FKM, IP65
Water temperature -10 to +130°C
Water temperature -10 to +130°C 230V version on request
Water temperature -10 to +130°C 230V version on request
IT.0404-24
IT.0405-24
IT.0405-230
Solenoid valve SS body with plug, NC, G1/2" F-F, 24V, 16bar, seal FKM, IP65
Solenoid valve SS body with plug, NC, G1/8" F-F, 24V, 150bar, seal Ruby*, IP65
Solenoid valve SS body with plug, NC, G1/8" F-F, 230V, 150bar, seal Ruby*, IP65
Water temperature -10 to +130°C 230V version on request
IT.0406-24 Solenoid valve SS body with plug, NC, G1/4" F-F, 24V, 100bar, seal Ruby*, IP65
Water temperature -10 to +130°C
IT.0420-24 Coil 24V, 50/60Hz, 18VA, IP65
Water temperature -10 to +130°C
Water temperature -10 to +130°C
IT.0406-230
IT.0407-230
Solenoid valve SS body with plug, NC, G1/4" F-F, 230V, 100bar, seal Ruby*, IP65
Solenoid valve SS body with plug, N/O, G1/8" F-F, 230V, 55bar, seal Ruby*, IP65
Water temperature -10 to +130°C 240V version on request
Water temperature -10 to +130°C
IT.0420-230
IT.0421
Coil 230V, 50Hz, 240V-60Hz, 18VA, IP65
Connector with seal and fixing screw, 250V, IP65, PG9
*Ruby = syntheticCopyright© ruby, NC = Idrobase normally Group. closed,All NOrights = normally reserved. open
Car Wash Solenoid valves IT.0046
IT.0047
IT.0048
H.p. 2-way solenoid valve, 230V, 50/60Hz, 68bar, G3/8" F-F, NO. Stainless steel valve seat max 53l/min at 4bar
H.p. 2-way solenoid valve, 230V, 50/60Hz, 80bar, G3/8" F-F, NC. Stainless steel valve seat max 53l/min at 4bar
H.p. 2-way solenoid valve, 24V, 50/60Hz, 80bar, G3/8" F-F, NC. Stainless steel valve seat max 53l/min at 4bar
IT.0050
IT.0049
H.p. 2-way solenoid valve, 24V, 50/60Hz, 80bar, G1/2" F-F, NC. Stainless steel valve seat max 108l/min at 4bar
H.p. 2-way solenoid valve, 230V, 50/60Hz, 80bar, G1/2" F-F, NC. Stainless steel valve seat max 108l/min at 4bar
Pressure switches for low water IT.0379
IT.0380
IT.0381
IT.0382
Diaphragm pressure switch, NO, G1/8" M, 1÷10bar, 0,5A, 250V, IP54
Pressure switch cap for IT.0379
Diaphragm pressure switch, 3 contacts, G1/8" M, 1÷10bar, IP65
Pressure switch connector for IT.0381
MADE IN ITALY
MADE IN ITALY
Includes: screw, seal, nut; PG11
NC = normally closed,Group. NO = normally Copyright© Idrobase All rightsopen reserved.
47
Car Wash Detergents and chemicals
Double Green
MADE IN ITALY
Code
CDR.1708-10
CDR.1708-25
New Idroplus
Code
CDR.1707-10
CDR.1707-25
Idrowind
Code
CDR.1702-10
Idroalloy
Code
CDR.1704-10
Nero Gomme
Code
CDR.1705-12
Idromoq
Code
CDR.1703-10
Description
Weight
Detergent with an exclusive formulation for professional cleaning of car exteriors. The best synthesis of research and development applied to cleaning. Incomparable effectiveness on greasy dirt, smog, soil and oil residues
10kg
Description
Weight
The detergent for professional deep cleaning of heavy vehicle exteriors. For effectively removing even the most stubborn dirt, without damaging the vehicle surfaces
Description
25kg
10kg
25kg
Weight
The specific formulation makes it possible to polish and protect plastic surfaces such as dashboards, bumpers, and mudguards. 10kg It is also suitable for wood and rubber surfaces
Description
Weight
Concentrated detergent, effectively cleans any type of rim in aluminium and related alloys
10kg
Description
Weight
Specially formulated detergent designed for polishing, cleaning, renewing and protecting tyres, enhancing and restoring their original appearance. For an anti-aging effect that lasts several days, protecting the tyres from hardening and cracking caused by solar radiation
12kg
Description
Weight
Detergent for deep cleaning all the fabric surfaces of the car such as seats, carpets, door panels and floor mats. 10kg The specific formulation ensures excellent cleaning results with a long-lasting protectant effect on the surfaces
CopyrightŠ Idrobase Group. All rights reserved.
Car Wash MADE IN ITALY
Chamois leather
Code
ZX.44X30 ZX.55X36 ZX.67X44
Size
440 x 300mm 550 x 360mm 670 x 440mm
Chamois leather, Chamois leather for fast and gentle cleaning and polishing of the car body. Ideal for all surfaces, your chamois cloth is the perfect solution that leaves no marks. Eco-friendly product treated with pure fish oil.
Sanitising agent for cars
Code
CDR.1913 A-Aria Pura: is the best solution for killing bacteria in your car: not only to clean and disinfect your car but also to sanitise the interior spaces, air conditioning ducts and vents, fans and air ducts. Spray can 150ml.
CopyrightŠ Idrobase Group. All rights reserved.
49
Car Wash H.p. hose reel
MADE IN ITALY
RA.AV1100FE
RA.AV1100
ZX.1111
Automatic hose reel, made of painted steel, inlet G1/2" M, outlet G1/2" M, 200bar
Automatic hose reel, made of AISI 316 stainless steel, inlet G1/2" M, outlet G1/2" M, 200bar (without hose)
Manual hose reel, made of nylon, inlet G3/8" M, outlet M22x1,5 M, 200bar, 150°C
Automatic hose reel for hose ø1/2", 20m
Automatic hose reel for hose ø1/2", 20m
Manual hose reel for hose ø5/16", 18m
RA.ST20FE
RA.ST20
RA.KIT-10
Swivel bracket, made of painted steel, for automatic hose reel RA.AV1100FE
Swivel bracket, made of AISI 316 stainless steel, for automatic hose reel RA.AV1100
Seal ø12mm, for automatic hose reel RA.AV1100FE and RA.AV1100
Manufactured before 01/2008 (check seal diameter)
RA.4961
RA.4962
RA.KIT-11
Swivel coupling, for painted steel automatic hose reel RA.AV1100FE
Swivel coupling, for AISI 316 stainless steel automatic hose reel RA.AV1100
Seal ø14mm, for automatic hose reel RA.AV1100FE and RA.AV1100
Manufactured after 01/2008 (check seal diameter)
Copyright© Idrobase Group. All rights reserved.
The copyright© of this catalogue is owned by IDROBASE GROUP® Srl. It is permitted to read, consult and circulate in hard copy or electronic format this catalogue for personal use only. It is not permitted to sell, reproduce or make any alterations to this catalogue without the prior written consent of IDROBASE GROUP® Srl. This catalogue replace the previous one Technical features, prices, data, tables and figures are just indicative. Any changes can be made by the company without prior notice.
i
p
idrobase.com
perfectcool.it
Idrobase Group s.r.l.
35010 BORGORICCO (PD) ITALIA - Via dell’Industria, 25 +39 049 9335903
+39 049 9335922
info@idrobasegroup.com
www.idrobasegroup.com
idrotech.com
clubdeiriparatori.com
Quality Certification n° 9.160 -IDR3 - 30/10/1998 UNI ES ISO 9001:2008