PRODUCTS CATALOG
Foam nebulizer - Foam nebulizer 8.2015-Y
Ready Nebulizer: foam cleaning machine
Foam nebulizer Foam Washing Machine foam cleaning machine
Technical parameter: Air pressure: 36.25psi Maximum pressure: 43.51psi Capacity: 13.20 US gal
8.2016-Y
Active Nebulizer: multi-function foam cleaning machine
Foam nebulizer Multi-function foam Washing Machine foam cleaning machine Technical parameter : Air pressure: 36.25psi Maximum pressure: 43.51psi Capacity: 13.20 US gal
2
Foam lances - Foam lance with POM delivery AFC.0873-P Description
1
Foam lance, with 0.26 gal tank capacity, inlet G1/4” F
7
Specifications 2
6 8
4
1. Micrometric detergent regulator screw with EPDM 70 seal and AISI 303 stainless steel bolt 2. Detergent dispenser made of shock-resistant plastic, AISI 304 stainless steel “duck-bill” foam diffuser, fan spray from 0° to 40° 3. “Lozenge” for producing the foam, made of pressed AISI 304 stainless steel wires 4. 1L polyamide detergent tank with non-deformable increased thread 5. Brass body 6. Nozzle made of AISI 304 Stainless steel 7. POM injector housing 8. Tank connector made of POM, which doesn’t damage the tank thread
5
3
Tech. features Inlet: G1/4” F Rated pressure: 2320.6psi Working pressure: 2610.6psi Max flow rate: 5.28 US gal/min Temperature: 140 °F Nozzle: ø4,9in
Why choose POM? Differently from brass, POM:
- is flexible and resistant: it doesn’t break in the event of accidental falls - doesn’t absorb moisture: in very cold environments moisture can turn into ice, making the plastic very fragile - has a homogeneous and uniform surface: better detergent flow - has a low porosity: it can’t be damaged by contact with chemical products - doesn’t oxidize: oxidised areas may clog the filter over time - doesn’t trigger chemical reactions: improves cleaning and the foaming effect
Brass body > Test result at 150 hours of work
ZA.0982-P Foam lance, with 0.26 gal tank, M inlet connection, KW type
3
Foam kit POM delivery Fitting K채rcher ZA.O986-P-POM Foam lance with brass body, POM delivery with POM bayonet CDR.7388
Fitting K채rcher ZA.0986-POM Foam lance with brass body, POM delivery with POM bayonet CDR.0372
Fitting Portotecnica, Faip, Bosch ZA.1097-P Foam lance with brass body, POM delivery with brass bayonet CDR.7393
Fitting old Lavorwash, Annovi and Alto ZA.7046-H Foam lance with brass body, POM delivery with brass bayonet CDR.7380
Fitting Lavorwash ZA.7045-P Foam lance with brass body, POM delivery with brass bayonet CDR.7346
4
Foam kit POM delivery Fitting K채rcher ZA.0993-P Foam lance with brass body, POM delivery with AISI 416 stainless steel M quick + stainless steel and brass ball adapters a ZX.0841+b ZA.0843-P +c ZX.0842
a
b c M zinced steel
ZA.0907-P Foam lance with brass body, POM delivery with galvanized steel M quick coupling CDR.7009
Fitting K채rcher ZA.0994-P Foam lance with brass body, POM delivery with M connector KW type + F ball quick coupling KW type M22x1,5 F + M connector KW type - M22x1,5 M a ZX.0980-P+ b ZA.0982-P +c ZX.0981
b
a c
M22 Long ZA.0988-L-P Foam lance with brass body, POM delivery with screw quick coupling M22x1,5 M long CDR.7379 suitable for spray guns with extension, also with double O-ring
Fitting K채rcher ZA.1368-P Foam lance with brass body, POM delivery with M22x1,5 F screw quick coupling CDR.7108-S
5
Foam lances - Foam lance connections AFC.7658
AFC.0001
REVERSE F swivel ball quick coupling KW type, inlet G1/4” M
AFC.0001-SS
F swivel ball quick coupling KW type, inlet G1/4” M
AISI 303 stainless steel F swivel ball quick coupling KW type, inlet G1/4” M
dimensions
q.ty
lb
dimensions
q.ty
lb
dimensions
q.ty
lb
16x8x6,6 in
80
41,23
16x8x6,6 in
80
42,11
16x8x6,6 in
80
39,24
47x31x39 in
4800
2528,7
47x31x39 in
4800
2581,61
47x31x39 in
4800
2409,65
AB.0004
AB.0004-M
Quick coupling, M KW type, inlet G1/4” F
Quick coupling, M KW type, inlet G1/4” M
dimensions
q.ty
lb
dimensions
q.ty
lb
14x6x6 in
200
34,61
14x6x6 in
200
37,48
47x31x39 in
16000
2824,12
47x31x39 in
16000
3053,4
AFC.7009
AFC.7010
M swivel ball quick coupling male made of galvanised steel, G3/8” F, 3625.9psi
AFC.7011
Female swivel ball quick coupling made of chromed brass, G3/8” F, 3625.9psi
AFC.7012
Male swivel ball quick coupling made of AISI 416 stainless steel, G3/8” F, 3625.9psi
Female swivel ball quick coupling made of AISI 304 stainless steel, G3/8” F, 3625.9psi
dimensions
q.ty
lb
dimensions
q.ty
lb
dimensions
q.ty
lb
dimensions
q.ty
lb
10x6x6 in
200
23,15
12x7x8 in
100
37,48
10x6x6 in
200
23,81
12x7x8 in
100
35,94
47x31x39 in
23000
2718,3
47x31x39 in
6400
2453,74
47x31x39 in
23000
2793,25
47x31x39 in
6400
2356,74
6
Foam lances - Foam lance connections AFC.7388
AFC.0372
POM bayonet, G1/4”” F G1/4 fitting Kärcher
AFC.7393
Brass bayonet, G1/4” F fitting Kärcher
AFC.7380
Brass bayonet, G1/4” F fitting Portotecnica, Faip, Bosch
Brass bayonet, G1/4” F Fitting old Lavorwash, Annovi and Alto
dimensions
q.ty
lb
dimensions
q.ty
lb
dimensions
q.ty
lb
dimensions
q.ty
lb
19x10x10 in
380
37,48
12x18x7 in
200
45,19
14x6x6 in
200
37,92
12x6x7 in
350
33,29
47x31x39 in
4560
511,47
47x31x39 in
12800
2947,58
47x31x39 in
1600
3088,67
47x31x39 in
22400
2186,98
AFC.7346 Brass bayonet, G1/4” F fitting Lavorwash
AFC.7107-S
AFC.7108-S
AFC.7111
Short screw coupling, M22x1,5 F ø14 - G1/4” F, 3190.8psi
Short screw coupling, M22x1,5 F ø14 - G1/4” M, 3190.8psi
Brass nipple, M22x1,5 M ø4 - G1/4” M, 3190.8psi
dimensions
q.ty
lb
dimensions
q.ty
lb
dimensions
q.ty
lb
dimensions
q.ty
lb
12x7x7 in
200
22,93
10x10x6 in
200
23,59
10x10x6 in
200
30,2
10x10x6 in
500
50,93
47x31x39 in
12800
1523,39
47x31x39 in
13800
1684,33
47x31x39 in
13800
2140,69
47x31x39 in
34500
3569,28
AFC.7379
AFC.7184
Brass nipple, M22x1,5 F ø14 long - G1/4” M, 3190.8psi
AFC.7185
Brass l.p. nipple, G1/4” M - G1/4” M
Brass l.p. nipple nipple, G3/8” M - G1/4” M
dimensions
q.ty
lb
dimensions
q.ty
lb
dimensions
q.ty
lb
10x10x6 in
200
38
10x6x6 in
800
34
10x6x6 in
500
36
47x31x39 in
13800
2672
47x31x39 in
92000
3986
47x31x39 in
57500
4239
7
AFC.7709
Twist Gun Plastic Acid-proof chromium plating
Gun for cleaning car interiors, powered by compressed air.
Plastic rotating pipe
Steel body, pressure range 87.0-130.5psi; M quick coupling inlet; plastic rotating pipe, 0.26 US gal tank capacity, detergent suction filter.
Regulator that enables precise detergent dosing
AFC.7710
Twist Gun Brush
Plastic rotating pipe
Acid-proof chromium plating
Gun for cleaning car interiors, powered by compressed air.
Brush to avoid any damage to the car body
Body made of steel, pressure range 87.0-130.5psi; M quick coupling inlet; plastic rotating pipe with cleaning brush, 0.26 US gal tank capacity, detergent suction filter.
Regulator that enables precise detergent dosing
AFC.7711
Twist Gun Metal Acid-proof chromium plating
Metal rotating pipe
Regulator that enables precise detergent dosing
Gun for cleaning car interiors, powered by compressed air. Body made of steel, pressure range 87.0-130.5psi; M quick coupling inlet; metal rotating pipe, 0.26 US gal tank capacity, detergent suction filter.
8
AFC.7712
Twist Air Gun Brush Gun for cleaning car interiors and mechanical parts. Twist Air Gun Brush is used with compressed air from a standard compressor at 43.5 to 101.5 psi. It is a Twist Gun Brush but without the detergent bottle and thus without the intake pipe; the cone is made of shockproof plastic, preventing any damage to the car body and it has a specific brush on the edge for a deep and accurate cleaning. The classic rotating pipe is situated inside the outlet cone. The characteristics of the Twist Gun Air Brush enable through cleaning of the surfaces of the car that are the smallest and narrowest and thus difficult to clean. Metal rotating pipe
AFC.7713
Twist Air Gun Gun for cleaning car interiors and mechanical parts. Twist Air Gun is used with compressed air from a standard
Plastic rotating pipe
compressor at 43.5 to 101.5 psi. It is a Twist Gun Plastic but without the detergent bottle and thus without the intake pipe; the cone is made of shockproof plastic, preventing any damage to the car body. The classic rotating pipe is situated inside the outlet cone. The characteristics of the Twist Gun Air enable through cleaning of the surfaces of the car that are the smallest and narrowest and thus difficult to clean.
9
Pressure gauges with stainless steel case Back entry
a
Code
b
d
c
ø
Inlet
Scale
a
AFC.7634
1,5 in
1/8" M-BSPT
0-1740 psi
b
AFC.7SS401N1P
1,5 in
1/8" M-BSPT
0-2321 psi
b
AFC.7SS403N1P
1,5 in
1/8" M-BSPT
0-4351 psi
c
AFC.7SS501N2P
1,9 in
1/4" M-BSPT
0-2321 psi
c
AFC.7SS502N2P
1,9 in
1/4" M-BSPT
0-3626 psi
c
AFC.7SS504N2P
1,9 in
1/4" M-BSPT
0-4569 psi
d
AFC.7SS632N2P
2,4 in
1/4" M-BSPT
0-3626 psi
d
AFC.7SS634N2P
2,4 in
1/4" M-BSPT
0-4569 psi
d
AFC.7SS635N2P
2,4 in
1/4" M-BSPT
0-5801 psi
Professionalp pressure gauge, case and ring made of AISI 304 stainless steel, temperature -20°C (-40°F) +80°C (+170-°F). Scale: bar (black), psi (red).
WARNING !!! To avoid damaging pressure gauges, we recommend using pressure gauges with a full scale range of twice the working pressure of the pump.
Flanges/brackets
Code
e
g
f
h
ø
Description
e
AFC.7259
1,9 in
Fixing bracket
f
AFC.7316
1,9 in
Flange
g
AFC.7249
2,4 in
Fixing bracket
h
AFC.7248
2,4 in
Flange
Stainless steel flanges and steel fixing brackets for ø50 and ø63 pressure gauges.
Radial entry
Code
i k
ø
Inlet
Scale
i
AFC.7SS501N2R
1,9 in
1/4" M-BSPT
0-2320 psi
i
AFC.7SS502N2R
1,9 in
1/4" M-BSPT
0-3625 psi
i
AFC.7SS504N2R
1,9 in
1/4" M-BSPT
0-4569 psi
i
AFC.7SS505N2R
1,9 in
1/4" M-BSPT
0-5801 psi
k
AFC.7SS631N2R
2,4 in
1/4" M-BSPT
0-2321 psi
k
AFC.7SS632N2R
2,4 in
1/4" M-BSPT
0-3626 psi
k
AFC.7SS634N2R
2,4 in
1/4" M-BSPT
0-4569 psi
k
AFC.7SS635N2R
2,4 in
1/4" M-BSPT
0-5801 psi
k
AFC.0110
2,4 in
1/4" M-BSPT
0-87 psi
Professional pressure gauge, case and ring made of AISI 304 stainless steel, temperature -20°C (-40°F) +80°C (+170°F). Scale: bar (black), psi (red). WARNING !!! To avoid damaging pressure gauges, we recommend using pressure gauges with a full scale range of twice the working pressure of the pump.
10
Filters Inlet water filters AFC.7691
AFC.1239
Inlet water filter G3/4 F, complete with seal
Inlet water filter fitting Kärcher BIG, (for HOBBY and SEMI-PROFESSIONAL H.P. WASHERS) inlet G3/4” F, outlet G3/4” M, max pressure 116 psi
Cartridge 200 mesh (74mcrs)
AFC.7247 Inlet water filter fitting Kärcher SMALL, (for HOBBY and SEMI-PROFESSIONAL H.P. WASHERS) inlet G3/4” F, outlet G3/4” M, max pressure 116 psi
Cartridge 250 mesh (80mcrs) BLACK ring nut. ø2,46 in
AFC.7247-Y Inlet water filter fitting Kärcher SMALL, (for HOBBY and SEMI-PROFESSIONAL H.P. WASHERS) inlet G3/4” F, outlet G3/4” M, max pressure 116 psi
Cartridge 250 mesh (80mcrs) BLACK ring nut ø1,9 in
AFC.7504 Inlet water filter inlet G 1/2F, outlet G 1/2M, by pass 2xG 1/4F 300mcr-50mesh
Cartridge 250 mesh (80mcrs) YELLOW ring nut ø1,9 in
Cartridge 50mesh (300mcrs) AISI 430 stainless steel net
Fuel filters AFC.7004 In line fuel filter, 43microns
AFC.7060 In line fuel filter, 152microns
AFC.7005 In line fuel filter lter, 30microns
11
Spray Gun Black & Black Plus Black spray gun Max pressure
4061psi
Max flow rate
6.6 US gal/min
Max temperature
302 °F
Code
a b
Inlet
Outlet
a
AFC.7700
G3/8” F
G1/4” F
b
AFC.7702
G3/8” M
G1/4” F
c
AFC.7703
M22x1,5 M
G1/4” F
c
Features suitable for continuous use: 2611 psi, 3.9 US gal/min, 194 °F
Black Plus Max pressure
4061psi
Max flow rate
6.6 US gal/min
Max temperature
302 °F
Code
a b
c
Inlet
Outlet
a
AFC.7705
G3/8” F
G1/4” F
b
AFC.7707
G3/8” M
G1/4” F
c
AFC.7708
M22x1,5 M
G1/4” F
Features suitable for continuous use: 2611 psi, 3.9 US gal/min, 194 °F
12
Lance and nozzle holders Straight lance, mouldel handle - outlet G1/4” M
Length
Inlet
Outlet
Max pressure
4061psi
Code
AFC.7573
19,6 in
G1/4" M
G1/4" M
Max flow rate
10.5 US gal/min
AFC.7574
27,5 in
G1/4" M
G1/4" M
Max temperature
302 °F
AFC.7575
35,4 in
G1/4" M
G1/4" M
AFC.7576
47,2 in
G1/4" M
G1/4" M
Made of chromed steel
Nozzle holders ZA.7113
AFC.7024
Nozzle holder with black guard. Made of galvanized steel, inlet G1/4” F, outlet 1/4” NPT-F
AFC.7023
Brass nozzle holder fitting Kärcher, G1/4” F - M18x1,5 M
Nozzle tip retainer fitting Kärcher, M18x1,5 F
ZA.7019 Brass adapter for lance fitting Kärcher, inlet M18x1,5 F, outlet G1/4” M. Ideal to fit nozzles with inlet G1/4” F on lances fitting Kärcher with connection M18x1,5 M
Extensions AFC.7409
AFC.7410 Extension lance,, 22,8 in , without nozzle holder, inlet M22x1,5 M, outlet G1/4” M
Vented grip extension, 14,9 in , inlet G1/4” M, outlet M22x1,5 F
Made of chromed steel 3191 psi, 10.5 US gal/min, 302 °F
Made of chromed steel 3191 psi, 10.5 US gal/min, 302 °F
13
Car Wash Underbody Lance
37,4 in
21,6 in
Code Max pressure
3190 psi
Max flow rate
6.6 US gal/min
Max temperature
194 째F
Description
ZA.1781
Aluminium lance body with nozzle holders, with 4 nozzles 65째 angle, AISI 304 stainless steel connection hose
14
Nozzles H.p. nozzles, NPT-M 1/4" NPT-M
Code
Angle
Flow rate
Angle
Flow rate
AFC.74-1503
15°
030
AFC.74-2503
25°
030
AFC.74-15035
15°
035
AFC.74-25035
25°
035
AFC.74-1504
15°
040
AFC.74-2504
25°
040
AFC.74-15045
15°
045
AFC.74-25045
25°
045
AFC.74-1505
15°
050
AFC.74-2505
25°
050
AFC.74-1506
15°
060
AFC.74-2506
25°
060
Angle
Flow rate
Angle
Flow rate
AFC.7P-2503
25°
030
AFC.7P-25045
25°
045
AFC.7P-25035
25°
035
AFC.7P-2505
25°
050
AFC.7P-2504
25°
040
AFC.7P-25055
25°
055
H.p. nozzles 1/4" NPT-M, body made of AISI 304 stainless steel, insert AISI 420 stainless steel
Code
H.p. tip nozzles H.p. tip nozzles fitting Kärcher, body made of AISI 304 stainless steel, insert AISI 420 stainless steel
Code
Code
Rotating nozzles 2901psi inlet G1/4" F Rotating nozzle, inlet G1/4" F, max pressure 2901psi, max temperature 140 °F Recommended for cold water h.p. washers with pressure up to 150bar
Code
Flow rate
AFC.7644
030
AFC.7645
035
AFC.7646
2901psi inlet M18x1,5 F Rotating nozzle fitting Kärcher, inlet G1/4” F, max pressure 2901psi, max temperature 140 °F Recommended for cold water h.p. washers with pressure up to 150bar
Code
Flow rate
ZA.7152
030
ZA.7153
035
040
ZA.7154
040
AFC.7647
045
ZA.7155
045
AFC.7648
050
ZA.7156
050
AFC.7649
055
ZA.7157
055
AFC.7650
060
ZA.7158
060
AFC.7651
065
ZA.7159
065
AFC.7652
070
ZA.7160
070
15
Swivel ball quick couplings KW type AFC.7658 REVERSE F swivel ball quick coupling KW type, inlet G1/4” M
W
HO
RKS WO IT
Max 3191psi, 302 °F
AFC.0001 Swivel ball quick coupling F KW type, inlet G1/4” M
W
HO
RKS WO IT
Max 3191psi, 302 °F
AFC.0001-SS F swivel ball quick coupling AISI 304 stainless steel KW type, inlet G1/4” M
W
HO
RKS WO IT
Max 3191psi, 302 °F
AB.0004
AB.0004-M
Quick coupling, M KW type, inlet G1/4” F
Quick coupling, M KW type, inlet G1/4” M
dimensions
q.ty
lb
dimensions
q.ty
lb
14x6x6 in
200
35
14x6x6 in
200
37
47x31x39 in
16000
2824
47x31x39 in
16000
3053
16
Ball quick couplings AFC.7009
AFC.7010 Female swivel ball quick coupling made of chromed brass brass, G3/8” F, 3626 psi
H.p. ball quick coupling, male, made of galvanised steel, inlet G3/8” F, 3626 psi
dimensions
q.ty
lb
dimensions
q.ty
lb
10x6x6 in
200
23
12x7x7 in
100
37
47x31x39 in
23000
2718
47x31x39 in
6400
2454
AFC.7011
AFC.7012
H.p. ball quick coupling, male, made of AISI 416 stainless steel, inlet G3/8” F, 3626 psi
H.p. ball quick coupling, female, made of AISI 304 stainless steel, inlet G3/8” F, 3626 psi
dimensions
q.ty
lb
dimensions
q.ty
lb
10x6x6 in
200
24
30x17x19 cm
100
36
47x31x39 in
23000
2793
47x31x39 in
6400
2357
Ball quick couplings MIDI type AFC.0014
AFC.0016
H.p. ball quick coupling, male MIDI, made of galvanised steel, inlet G3/8” F, 3191 psi
H.p. ball quick coupling, female MIDI, made of brass, inlet G3/8” F, 3191 psi
AFC.7103 H.p. ball quick coupling, female MIDI, made of brass with black rubber protection, inlet G3/8” F, 3191 psi
8 Balls 1 O-Ring
AFC.0012
8 Balls 1 O-Ring
AFC.0011
H.p. ball quick coupling, male MIDI, made of stainless steel, inlet G3/8” F, 3191 psi
H.p. ball quick coupling, female MIDI, made of stainless steel, inlet G3/8” F, 3191 psi
17
Screw quick couplings M22x1,5 ø0,55 in Nipples M22x1,5 M ø14
Code
a
b c
e
d f g
h
Inlet
Outlet
a
AFC.7111
G1/4" M
M22x1,5 M ø0,55 in
b
AFC.7016
G1/4" F
M22x1,5 M ø0,55 in
c
AFC.7017
G3/8" M
M22x1,5 M ø0,55 in
d
AFC.7015
G3/8" F
M22x1,5 M ø0,55 in
e
AFC.7112
M22x1,5 M
M22x1,5 M ø0,55 in
f
AFC.7129
G1/2" M
M22x1,5 M ø0,55 in
g
AFC.7130
G1/2" F
M22x1,5 M ø0,55 in
h
AFC.7062
M22x1,5 M ø14
M22x1,5 M ø0,55 in
Nipples M22x1,5 M ø14, made of brass. Pressure 3191 psi, flow rate 10 US gal/min, temperature 302 °F
Screw couplings M22x1,5 M ø14
b
a c d
e
f
g
Code
Inlet
Outlet
a
AFC.7108
G1/4" M
M22x1,5 F ø0,55 in
b
AFC.7107
G1/4" F
M22x1,5 F ø0,55 in
c
AFC.7014
G3/8" M
M22x1,5 F ø0,55 in
d
AFC.7013
G3/8" F
M22x1,5 F ø0,55 in
e
AFC.0010
M22x1,5 F
M22x1,5 F ø0,55 in
f
AFC.7118
G1/2" M
M22x1,5 F ø0,55 in
g
AFC.7119
G1/2" F
M22x1,5 F ø0,55 in
Screw quick couplings M22 x1,5 F ø14, made of brass, with 1 O-Ring(*VITON®). Pressure 3191 psi, flow rate 10 US gal/min, temperature 302 °F
Screw couplings M22x1,5 F ø14 short
a
b
Code
Inlet
Outlet
a
AFC.7107-S
G1/4" F
M22x1,5 F ø0,55 in
b
AFC.7108-S
G1/4" M
M22x1,5 F ø0,55 in
Screw quick couplings M22x1,5 F ø14, short made of brass, with 1 O-Ring(*VITON®). Pressure 3191 psi, flow rate 10 US gal/min, temperature 302 °F
*VITON® is a registered trademark of Dupont
18
Accessories for hobby h.p. washers CDR.7388
CDR.0372
POM bayonet bayonet, G1/4” F fitting Kärcher
Brass bayonet bayonet, G1/4” F fitting Kärcher
dimensions
q.ty
lb
dimensions
q.ty
lb
19x10x10 in
380
38
12x7x7 in
200
45
47x31x39 in
4560
511
47x31x39 in
12800
2947
dimensions
q.ty
lb
14x6x6 in
200
38
47x31x39 in
1600
3089
CDR.7380
CDR.7393
Brass bayonet, G1/4” F Fitting old Lavorwash, Annovi and Alto
Brass bayonet, G1/4” F fitting Portotecnica, Faip, Bosch
dimensions
q.ty
lb
12x7x7 in
350
33
47x31x39 in
22400
2187
CDR.7346 Brass bayonet, G1/4” F fitting Lavorwash
dimensions
q.ty
lb
12x7x7 in
200
23
47x31x39 in
12800
1523
19
Accessories for hobby h.p. washers CDR.7250
CDR.7328 Extension lance with variable angle nozzle 0.90mm, 11in, made of chromed steel, inlet M22x1,5 M
Spray gun with extension, 20 in, inlet G1/4” M, outlet M22x1,5 F, 3191psi, 140 °F
CDR.7327
CDR.7326
Extension lance with variable angle nozzle 0,04 in, 11in, made of chromed steel, inlet M22x1,5 M
Lance with variable nozzle
Hobby foam kit, M22x1,5 M, 0.06 US gal
Code
Nozzle hole in
Flow rate
CDR.7320
0,03
020
CDR.7251
0,04
023
CDR.7299
0,04
025
CDR.7311
0,04
030
CDR.7309
0,05
035
Lance with variable angle nozzle, 17,7in, inlet M22x 1,5 M, 3191psi, 5.5US gal/min, 140 °F
20
The copyright© of this catalogue is owned by CLEANEAST®. It is permitted to read, consult and circulate in hard copy or electronic format this catalogue for personal use only. It is not permitted to sell, reproduce or make any alterations to this catalogue without the prior written consent of CLEANEAST®. This catalogue replace the previous one Technical features, prices, data, tables and figures are just indicative. Any changes can be made by the company without prior notice.
Ningbo CleanEast Cleaning Machines
Third Floor Third Floor, K Building Jiale industrial zone Ningbo 315176 (R.P.C.) +86 18 6688 32179 info@clean-east.com www.clean-east.com
Idrobase Group s.r.l.
35010 BORGORICCO (PD) ITALY - Via dell’Industria, 25 +39 049 9335903
+39 049 9335922
info@idrobasegroup.com www.idrobasegroup.com