RFID Bolt Seals
RFID Bolt seals provided by ID Tech Solutions are highly reliable, durable, and efficient enough to resist water and to work under high temperature and highpressure environment. These cable seals are heat resistant, chemical resistant. These C-TPAT compliant cable seals qualify as “High Security� seals and comply with ISO 17712:2013. These can only be used once and must be removed by Bolt cutters, providing anti-theft protection as well as preventing barrier loosening and associated damage. They also provides protection for containers in transit. These are of steel wire/cables in a tough plastic casing. This is a High-Security Seal, Univocally identifies the container or the vehicle to which it is attached. It can be easily and reliably read by fixed reading units placed at transit gates or by handheld reading units manually operated by inspectors and gives back it unique code as a basic RFID seal. When compared to standard RFID seals, tamper evident RFID seals are able to permanently store into their memory the tamper event by activating a status bit named TAG TAMPER ALARM, thus
providing immediate information about seal status at readings (tampered/not tampered); The thick steel bolt is housed in a tough plastic case which is corrosion resistant and weatherproof, making this a top choice for outdoor use in sealing shipping containers. The bolt seals are compatible with many different barriers and posts, and each carries its own unique reference number for safety audit purposes.
Electrical Characteristics Of RFID Bolt Seals Conforms to ISO 17712:2013 (H) Air interface Protocol: ISO/IEC 18000-6C, EPC Class 1 Gen 2 Technical Specification: Unique TID: 96 bit EPC: ≼ 96 bit User Memory: ≼ 128 Data retention: 50 years
Write endurance : 100,000 cycles Read Range: up to 10 meter Operating Frequency: 860-960 MHz Operating Mode: Passive (Battery Less Transponder)
General Characteristics Ingress Protection: IP65 Operating Temperature : -30˚C to +80˚C Storage Temperature: -30˚C to +80˚C
Mechanical Characteristics Attachment Method: Pin Length : 80mm Weight: 36.8 gram Material: Carbon steel galvanization+ ABS
Body Length: 72mm Weight: 39.7 gram Material: Carbon steel galvanization+ ABS
ID Tech Solutions being manufacturer provider, seller, and distributor of the wide range of NFC, Bluetooth, HF, UHF, RFID handheld reader, and RFID tags and cards provide them for clients across all industries and across the length and breadth of India. We being the RFID products and automation solution also provide these readers for inventory tracking and management, stock management, warehouse management, container management, access management, and other customized uses. We have our HQ in Gurgaon (DelhiNCR) India and we are providing the same for more than 15 years’ and have a long list of satisfied clients, who have benefited from our readers.