10
The Reflector, March 2021
IEEE Boston Reliability, NE ESDA Chapter, and iMAPS New England – 6:00PM, Wednesday, March 10
ESD Fixture Design Considerations and Case Studies Join us for this highly interactive webinar and learn about the complexity, customization and attention to detail required to successfully develop fixtures for ESD sensitive applications including Class 0 devices.
Fixture design considerations will be presented including material selection, ESD event detection, isolated conductors, and limitations of ionization. Manufacturing applications will cover operations such CONTACT: Email event contact: NE-ESDA Planning as in-circuit test, ESD damage during a board connec- REGISTRATION: HTTPS://EVENTS.VTOOLS.IEEE. tor press operation, cable discharges at test sets, auto- ORG/EVENT/REGISTER/263216 mated test heads, and burn-in. One of the Class 0 Case documents 22% failures rates with a good S20.20 program in place. The corrective action required modification to a test fixture and the addition of a special operating procedure. A particularly interesting Class 0 case study will be presented on the installation of CCDs at the Gemini Observatory in Hawaii. These CCDs cost $175,000 each which did not have any input protection and a 10 V CDM sensitivity.
Speaker: Ted Dangelmayer of Dangelmayer Associates, LLC Ted is the president of Dangelmayer Associates, LLC and has assembled an ESD consulting team consisting of the foremost authorities in virtually all ESD areas of both product design and manufacturing.
He received the “Outstanding Contribution” award and the EOS/ESD Association, Inc. “Founders” award. He was president of EOS/ESD Association, Inc., chairman of the ESDA standards committee, and general chairman of the EOS/ESD Symposium. He has published Location: This Webinar will be delivered through We- two editions of his book, ESD Program Management, bEx. Ensure your device has WebEx installed in ad- numerous magazine articles, and technical papers. vance. At registration you must provide a valid e-mail address Ted holds three patents and is iNARTE certified. He to receive the Webinar Session link the day before the is currently president of the Northeast local chapter of event. EOS/ESD Association, Inc., a member of the ESDA edEnsure your e-mail settings allow messages from IEEE ucation Council, and Nominations Committee. Boston MD to be delivered to your inbox. Email: ted@dangelmayer.com
