Great solution for small workshops
Mitre Saws
Woodturning Lathes
... See page 7
„Fast sander with profi sanding width“
NEWS
... See page 9
... See pages 2 & 4
JET JPT-10B Planer and Thicknesser with Stand
JET 16-32 PLUS Drum Sander
The machine combines the two most requested features: planing and thicknessing. Perfect for small woodworking projects at home or at constraction site. JET JPT-10B has a solid and stable construction, the precise cast aluminium planing tables and a long thicknessing table.
Practical drum sander with stand, sanding belt and feed belt. It can handle to sand 810 mm wide workpieces thanks to 1,9 kW power input. • Power Input: 1,9 kW • Speed: 1400 rpm • Sanding Drum Diameter: 125 mm • Feed Speed: 0–3 m/min. • Sanding Thickness: 0,8–75 mm • Min. Workpiece Length: 60 mm • Max. Workpiece Width: 405 (810) mm • Sanding Belt Width: 75 mm • Weight: 65 kg
- Maximal surfacing width 254 mm. - Powerful motor 1,5 kW. - Overload protection with reset circuit breaker. - Precise cast aluminium surface tables long 498 mm. - Easy operation between changing functions planing to thicknessing. - Aluminium fence tilts 90° - 45°. - Suitable for transport to assembly.
890,00 €
„Ideal thicknesser for weekend hobby work“
Special
1 076,90 € inc. VAT List Price 1 188,22 € inc. VAT
OFFER
• Rating: Hobby • Power Input (230 V): 1,5 kW • Cutterblock Speed: 9000 rpm • Max. Removal of Planing/Thicknessing: 3/2 mm • Max. Width of Surfacing: 254 mm • Max. Workpiece Thickness: 120 mm • Weight: 34 kg
SKU: 121-1632M
371,40 €
- Variable feed speed 0–3 m/min. - Specially balanced drum with adjustments for drum and table setting. - The Aluminium drum with inner ribs is self-cooling to protect workpiece from heat. - The height adjustment handle gives you control over sanding. - Easy change of sanding belt. - The floor stand as standard accessory.
The new strong & accurate Parallel Clamp are designed to hold the most elite woodworking projects and clamp up to 450 kg of pressure. These clamps have the quickest adjustment mechanism - simply lifting the Aluminium die-cast handle allows the sliding jaw to be moved anywhere on the rail. By removing this end stop, the movable jaw can be reversed and be used as speader - very useful in building window & door frames.
NEW
102,60 €
124,15 € inc. VAT List Price 148,83 € inc. VAT
SKU: 121-JPT-10B
Very popular saw for cutting all common types of wood and boards based on wood. Impressive depth of cut 80 mm. The rip fence can be clamped on both sides of the blade. Suitable for craftsmen, DIY or maintenance.
JET Mobile bases for machines
Smart Tip
Special OFFER
Special
Special
OFFER
OFFER
All-steel mobile bases has adjustable size and two fixed wheels on the back corners and two lockable castoring wheels on the front. Small base takes machines from 460 mm to 610 mm, up to 250 kg. Large base takes machines from 610 mm to 860 mm, up to 500 kg.
„Mobility can solve problem with small place“
• Max. Throat Opening (60 cm clamp): 65 cm • Max. Throat Opening (100 cm clamp): 106 cm • Spread Capacity (60 cm clamp): 24–79 cm • Spread Capacity (100 cm clamp): 24–119 cm • Throat Depth: 85 mm
216,60 €
262,09 € inc. VAT List Price 289,92 € inc. VAT
SKU: 139-39193
Set includes: 2x 100 cm parallel clamps, 2x 60 cm parallel clamps and 4x cross framing blocks.
SKU: 121-JTS-10M
- Reversible movable jaw can be used as spreader. - Exact 90° clamping. - Clamp up to 450 kg pressure. - I-profiled rail minimize bending. - Ergonomic aluminium die-cast handle. - Plastic end stop to maintain it at level. - Non-marring composite resin jaw faces. - Cross framing blocks for clamping frames at four points safely and securely.
- Stand included. - Powerful motor with brake. - Large table surface 940 x 950 mm. - Cuts up to 410mm wide with the fence. - Tilt and height adjustment wheels. - Angle Ruler. - Parallel ruler. - Rear extension table on the right side on request. - HM saw blade included.
Your local dealers:
PLAY VIDEO • Rating: Trade to 250 kg • Power Input: 1500 W • Blade Diameter x Bore: 254x30 mm € • Blade Speed: 4500 rpm 88,58 € inc. VAT • Max. Width of Cut: 410 mm List Price 118,58 € inc. VAT • Max. Depth of Cut: up to 80 mm SKU: 121-708118 • Weight: 37 kg
73,20
PRAGUE - WEST Tuchoměřice, V Kněživce 201, CZ-252 67 Opening Hours: Mon - Fri 7.30 -17.00 Website:
www.igm.cz
Eshop:
www.fachshop.eu
BRNO - MODŘICE Modřice, Brněnská 1066, CZ- 664 42 Opening Hours: Mon - Fri 7.30 -17.00 Email:
sales@igmtools.com
to 500 kg
95,30 €
115,32 € inc. VAT List Price 145,69 € inc. VAT SKU: 121-708119
February - May
IGM Sales & Testing Centres You can purchase our products through dealers network or in eshop www.igmshop.eu. In that case , the goods is shipped from IGM warehouse in the Czech Republic directly to your address.
Prices are valid from 1st February to 31st May or stock last.
OFFER
449,40 € inc. VAT List Price 462,10 € inc. VAT
„Ideal Saw for the workshop and JET JTS-10 Table Saw with stand the maintenance“
Parallel Quick Clamp Framing Kit, 2 x 60cm, 2 x 100cm, 4x framing blocks
Special
2016
Call: +420 220 950 910
SKU: F000-90131-EN-A
Prices are subject to change. Prices are without transport, in EUR excluding VAT and 21% VAT for sales outside Czech and Slovac, unless stated otherwise. IGM tools and machines Ltd. reserves the right to change the price or termination of the sale of goods without notice. Photos and images are only for illustration and may vary from the actual items. IGM nástroje a stroje s.r.o., V Kněžívce 201, Tuchoměřice, 252 67, Prague-west, Tax ID CZ25114727, Czech Republic.
„Industrial quality of edgebanding.“ IGM DR500 and BR300 Portable Edgebanders with glue application
Guiding plate width can be easily adjusted from scale of 10–65 mm and can be tilted within 15° for bevel edge banding.
The revolutionary new range of innovative edgebanders IGM is designed for quick edging of ABS, PVC, laminated furniture tapes or veneer to straight or curved workpieces. The granular glue is applied by sofisticated system directly onto the edgeband. It is applied ideal and consistant glue layer in the whole wide 65 mm for gluing long edges with maximal capacity. Result is strenght and clean bond in the whole wide with minimal overflow.
Tape Holder as standard.
- Will apply PVC, ABS, laminated or solid tapes from 0,3 - 3mm thick. - Perfect consistent glue application, double adhesive is not necessary. - Strenght and clean bond with minimal overflow. - Straightline and contour edgebanding up to 65mm wide. - Angle adjustment for beveled surfaces +/-15°. - Massive guiding plate with the scale thickness. - Improved system of precise corner edging. - Very quick to start to warm from cold.
Innovative system of glue application.
• Rating: Professional • Power Input (230 V): 855 W • Edge Thickness: 0,3–3 mm • Edge Height: 10–65 mm • Bevel Surfaces: 75°– 90° • Feed Speed: 2–6 m/min • Adjustable Temperature: 120–200°C • Recommended Melt Temperature: 140°C • Glue Tank Capacity: 400 ml • Length x Width x Height: 340 x 300 x 350 mm
IGM New Generation Edgebanders has many unique and patented features not found on any other portable edgebanders. It takes around 5 minutes to warm up from a cold start. The edgebander has new innovative consistent glue application which can be changed with easy-to-reach knob. New innovative system of glue application. It is better than a double adhesive, without skipping or overflows and soilling of the machine.
Corner guiding plate allows precise and easy corner edging.
Thermal Mode Switch.
TEFLON Coated Tape Sliding Base.
Variable Speed Control.
NEW Easy variable speed
DR500
• Feed Speed: 2–6 m/min • Weight: 9,8 kg
range with speed control located in the top of handle.
Special
1 360,00 €
OFFER
- Variable speed control 2–6m/min located in the top of handle. - Digital display for temperature control, indication feed speed and battery charge.
1 645,60 € inc. VAT List Price 1 936,00 € inc. VAT
Wireless Power Chord.
SKU: 142-DR500
The world’s first digital wireless portable edgebander M951 End trimmer for shaped and straight panels, with a rechargeable batteries. Includes: BC25 Tape Holder, Rechargeable Battery, Set of spanners, 200g
DR500 is the world’s first digital wireless portable edgebander with a rechargeable batteries which drive feed and glue application. You can also switch on the warming of glue pot.
IGM Worktable for edgebander and trimmer for DR500, BR300
high quality glue made for IGM from Henkel and instruction manual. All items are contained in a storage container, mounted on a wheeled trolley for safe transportation.
Smart Tip
„You can appreciate it during edgebanding“
Special OFFER
NEW
879,00 €
1 063,59 € inc. VAT List Price 1 249,93 € inc. VAT
BR300
Special
SKU: 142-BR300
- Adjustable glue temperature control and fixed feed speed. - Designed to be the lightest and simplest portable edgebander to use. Includes: set of spanners, 200g high quality glue and instruction manual. Packaged in a cardboard box with padding for safe transportation.
- Converts the portable edgebander into a simple, stationary machine. - Is possible to mount also edgeband trimmer. - Especially useful for thin or curved work. - Integral power socket and switch provides a convenient method of control during operation. - Magnetic „floats“ give a precise alignment for edge trimming with the PD80.
M951 End Trimmer for shaped and straight panels The M951 End Trimmer for shaped and straight panels is the perfect tool for cutting ABS, PVC, laminate or veneer edgebands or edge tape. SKU
Trimmer
M951-V
€ excl. VAT
€ inc. VAT
78,70
95,23
Includes: worktable with legs, mount for trimmer PD80, tape holder, NVR switch, 4 vacuum handles, guillotine and magnetic „floats“.
IGM PD80 Edgeband Trimmer
M964 Vacuum Power Clamp set Vacuum Power Clamp is designed to hold non-porous workpieces during drilling, milling, sanding or edge banding. Ideal for use with large workpieces or panels to stabilise them for edgebanding and power trimming operation. It is easy to use, will not mark the board and gives a strong grip on large panels for edgebanding, sanding or other processes. Includes one single clamp in each set. M967 Glue for IGM Edgebander
M966-01 Lever Valve for vacuum clamp M964
M966-02 Plastic T-spliter for vacuum clamp M964 Splitter is designed for the possibility of connecting additional vacuum cups. For example while edgebanding larger workpieces. Description
SKU
Vacuum Power Clamp Lever Valve Plastic T-spliter
M964 M966-01
2
M966-02
€ excl. VAT
€ inc. VAT
78,70 29,60 4,60
95,23 35,82 5,57
The specially developed hotmelt granules for IGM manual edgebanders at feed rate from 3 to 10 m / min. It is natural in color, has a low viscosity, rapid melting and high tack. Glue is designed for gluing edges of materials ABS, PVC, PP, melamine, polyester or veneer. The recommended temperature setting at IGM edgebanders approx. 140 ° C. Shelf life of at least 2 years if stored in a cool and dry place. Description
SKU
€ excl. VAT
€ inc. VAT
5 kg 25 kg
M967-5 M967-25
31,70 118,00
38,36 142,78
Red prices in the tables are already net discounted prices. The discount from list prices can be showed in%.
NEW
PD80 edge trimmer is designed for safe and accurate rounding or chamfering of furniture tape edges of wood, PVC, ABS, veneer or laminate edgebands or edge tape. Includes: R2 mm shank cutter, dual razor, set of spanners, plastic storage box.
- Low viscosity - Fast melting - High tack - Very good wetting - High glue milage - Low application temperature
For easier control of Vacuum Power Clamp system . Lever valve open and close the air intake. You can better control the clamping operation.
• Rating: Craft • Power Input (230 V/13 A): according to connected device • Length x Width x Height: 1575 x 1065 x 600 mm • Weight: 21,5 kg
This edgebanding table enables the portable edgebanders DR500 & BR300. This is very useful when carrying out multiple similar tasks such as a batch of table tops or drawer fronts. It also enables very thin or curved work to be edged without putting stress onto the work or when vacuum holder is problematic to use.
Optionals for edgebanders
Description
NEW
OFFER
• Feed Speed: 4 m/min • Weight: 8,7 kg
Description
SKU
€ exc. VAT
€ inc. VAT
IGM Tape Holder for DR500-BR300
142-BC25 142-ST95A
29,50 437,50
35,70 529,38
142-ST97
150,80
182,47
IGM Straightline edgebanding and trimming kit for ST95A
165,50 €
200,26 € inc. VAT List Price 292,82 € inc. VAT SKU: 142-PD80
• Rating: Craft • Power Input (230 V): 450 W • Speed: 30 000 rpm • Height Adjustment: 16 mm • Collet: 6 mm • Length x Width x Height: 240x90x205 mm • Weight: 2,3 kg
Special OFFER
The unique construction of trimmer with two holding knobs allows stable operations. The motor spins at 30,000rpm, providing the power and durability for deep cuts. It is supplied with telescopic transparent safeguard cover which copy surface and make always perfectly visible on the job. www.igm.cz
„The incomparable wet sharpener machine“
„Tested portable thicknesser for hobby and trade.“ JET JWP-12 Portable Thickness Planer
Special
JET JSSG-10 Wet Sharpener
Special OFFER
OFFER
This is a very effective wet grinding machine. The lower portion of the grindstone runs in a bath of water. As the grindstone revolves, continually it carries the water over the grinding surface, thus cooling it and eliminating the risk of overheating. Compact and powerfull 160 W motor controlled by a variable speed switch.
• Power Input: 200 W • Speed: 90–150 rpm • Wheel Diameter x Width : 250x50 mm • Honing Wheel Diameter x Width: 230x30 mm • Weight: 15 kg - Powerful 1,8 kW motor. - Material removal up to 2,5 mm per pass. - Solid management unit. - Supplied with 2 pairs of HSS knives.
+ FREE 2 sets of knives HSS for softwood and hardwood (1 set of FREE knives is load in cutterblock)
The Wet Sharpener is showed with optional accessories: second support arm and support arm extension.
293,80 €
355,50 € inc. VAT List Price 375,59 € inc. VAT
- Diameter of grindstone 250 mm. - Variable speed. - Rubber feet keep machine steady and minimise vibration. - Comprehensive accessories in basis. - A large selection of optional accessories.
Tested portable thicknesser for hobby and trade.
SKU: 121-JWP-12M
• Rating: Trade • Power Input: 1800 W • Speed: 9000 rpm • Feed Speed: 7m/min • Max. Removal: 2,5 mm • Wieght: 30 kg • Max. Depth of Cut: 153 mm • Max. Planing Width: 318 mm
„Five advantages for convenient and precise work“ JET JPT Planers and Thicknessers
Wide range of optional accessories for grinding of different tools. The Wet Sharpener includes: • Grindstone Wheel D250mm (code 121-708042) • Leather Honing Wheel (code 121-708043) • Stone Grader to change from coarse to fine and back again (code 121-708017) • Straight Edge Jig (kód 121-708029) • Honing Compound (code 121-708023) • Bevel Angle Measuring Device (code 121-708041) • Angle Setting (code 121-708033) • Support Arm (code 121- 708039) • Instructional DVD
OFFER
PLAY VIDEO
SKU: 121-JSSG-10M Carving tool Jig
Scissors Jig
Gouge Jig
Axe Jig
Profiled leather honing wheel
Long knive Jig
Folding Diamond Sharpener
Special OFFER
Special
Overall Diamond Stone (LxWxH): 150 x 50 x 4 mm.
Special
297,66 € inc. VAT List Price 351,99 € inc. VAT
Diamond Truing Tool Knive Jig
Diamond File Card Set 3pce (180,260,360) Coloured diamond sharpening files for sharpening pocket knives and small hand tools. Use dry or slightly damp.
246,00 €
Includes: 180 grit (blue) standard file, 260 grit (yellow) medium file and 360 grit (red) fine file.
OFFER
6,30 €
7,63 € inc. VAT List Price 8,35 € inc. VAT SKU: 125-349756
Folding double-sided diamond sharpener. Overall Diamond Stone (LxWxH): 100 x 20 x 6 mm. Grit on the one side is fine 600 and medium 325 on the other side.
6,90 €
8,35 € inc. VAT List Price 9,08 € inc. VAT SKU: 125-103512
+ FREE JET Numeric Thickness Display for JPT-310 It will give you an accurate visual indication of the amount on the thicknessing table in 0,1 mm increments. For all models: • Spindle Speed: 5500 rpm • Max. Removal of Planing/Thicknessing: 3/4,5 mm • Max. Workpiece Thickness: 225 mm JPT-260 • Rating: Trade • Power Input / Output (400 V): 2,65 kW / 1,7 kW • Max. Width of Surfacing: 256 mm • Weight: 170 kg
JPT-310 • Rating: Professional • Power Input / Output (400 V): 3,5 kW / 2,2 kW • Max. Width of Surfacing: 307 mm • Weight: 230 kg
JPT-410 • Rating: Professional • Power Input / Output (400 V): 4,5 kW / 3 kW • Max. Width of Surfacing: 407 mm • Weight: 330 kg
1 360,00 €
1 456,00 €
2 269,00 €
SKU: 121-JPT-260M
SKU: 121-JPT-310T
SKU: 121-JPT-410T
1 645,60 € inc. VAT List Price 1 906,96 € inc. VAT
1 761,76 € inc. VAT List Price 2 311,10 € inc. VAT
F992 Planer knives, soft-hard wood „WOOD PLUS“
Special OFFER
of 10% t n u o c s i d extra ces from 2 pie
Accurate and good quality IGM planer knives guarantee excelent result and fast planing at your machines. Our planer knives are made from high quality steel and grinded with great care in order meet strictest quality criteria.
WOOD PLUS (for soft and hard wood) Knive material is made of steel with a higher hardness for longer lifetime of the blade. Designed for rough and dry soft and hard wood. Planer Knive:
Planer knives „WOOD PLUS“
Dry soft wood Wet soft wood Dry hard wood Wet hard wood Chipboard, laminated
suitable suitable suitable suitable partially suitable
SKU
200 x 23 x 3 type ROJEK 200 x 30 x 3 210 x 30 x 3 230 x 30 x 3 250 x 30 x 3 260 x 17 x 1,5 type JET (2ks) 260 x 25 x 3 type JET 300 x 35 x 3 310 x 25 x 3 type JET 310 x 30 x 3 310 x 30 x 3 type ROJEK 319 x 18 x 3 type JET (2ks) 320 x 20 x 3 type JET 330 x 20 x 3 type JET 400 x 30 x 3 400 x 35 x 3 410 x 25 x 3 type JET 410 x 30 x 3 410 x 35 x 3 410 x 30 x 3 type ROJEK 450 x 35 x 3 510 x 30 x 3 510 x 35 x 3 550 x 35 x 3 610 x 30 x 3 610 x 35 x 3 630 x 35 x 3 650 x 35 x 3 810 x 35 x 3 820 x 35 x 3
F992-20023 F992-20030 F992-21030 F992-23030 F992-25030 F992-26017 F992-26025 F992-30035 F992-31025 F992-31030 F992-31130 F992-31918 F992-32020 F992-33020 F992-40030 F992-40035 F992-41025 F992-41030 F992-41035 F992-41130 F992-45035 F992-51030 F992-51035 F992-55035 F992-61030 F992-61035 F992-63035 F992-65035 F992-81035 F992-82035
€ exc. VAT
€ inc. VAT
11,20 7,20 7,60 8,80 9,00 22,50 9,40 10,50 10,10 10,60 17,00 27,40 10,50 10,80 13,10 13,90 13,40 12,70 13,60 18,80 15,00 16,60 17,70 18,60 19,90 21,20 21,90 22,00 27,40 27,70
13,56 8,72 9,20 10,65 10,89 27,23 11,38 12,71 12,23 12,83 20,57 33,16 12,71 13,07 15,86 16,82 16,22 15,37 16,46 22,75 18,15 20,09 21,42 22,51 24,08 25,66 26,50 26,62 33,16 33,52
Red prices in the tables are already net discounted prices. The discount from list prices can be showed in%.
Comfortably with only one hand you can lift the cast iron surfacing tables.
„Spiral spindle saving your money, health and patience“ JET JPT JET JPT Planers and Thicknessers with Spiral Spindle
2 745,49 € inc. VAT List Price 2 904,00 € inc. VAT
Sizes (mm)
Comfortably with only one hand you can lift the cast iron surfacing tables to change function. Switching from surface planning to thicknessing cannot be easier. With its long tables and precision fence accuracy comes as standard as well as a super finish every time, thanks to the 3 bladed cutter block. Easy eccentric rod adjustment of the infeed table make setting of the machine a simple process. Eccentric rod adjustment of the outfeed table on JPT-310 and JPT410. Dust extraction outlet keeps the machine clean when connected to a suitable dust extractor system. Machine for trade, workshops or maintenance, as well as for a wide range of applications.
Special OFFER
You can order JPT-310 and 410 models with special spiral spindle stepped with carbide reversible knives (14x14x2 mm). JPT-310HH
JPT-410HH
2 482,00 €
3 416,00 €
SKU: 121-JPT-310HH-T
SKU: 121-JPT-410HH-T
3 003,22 € inc. VAT List Price 3 080,66 € inc. VAT
4 133,36 € inc. VAT List Price 4 235,00 € inc. VAT
www.igm.cz
3
„Efficient power feeder is better than inefficient worker“ NEW
IGM M3 Power Feeder Small and practical material feeder ideal for use in router tables, small spindle moulders, surface planers, saws and edgebanding tables. The three non marking PU rollers with variable speed of 2-12m/ min + reverse are fitted with suspension movement for extra grip and to perfectly cope with surface irregularities. The unit can be mounted directly onto the table of the machine, either by bolting through or by screwing into holes tapped into the machine bed, or fitted using the IGM Quick fit universal plate for power feeder.
- Ideal for small and medium spindle moulders, surface planers or saws. - 3 PU rollers of 80 x 30mm give excellent non-marking grip. - Feed rate of 5, 8, 9 and 11m/min. - 240W motor with reverse switch. - Universal stand with 260mm reach. - Light duty feeder for trade users and hobby.
Special
230V
396,00 €
324,41 € inc. VAT List Price 405,35 € inc. VAT
OFFER
479,16 € inc. VAT List Price 562,65 € inc. VAT
SKU: 141-M3M
SKU: 141-AF32M
400V
SKU
€ exc. VAT
€ inc. VAT
46,00
55,66
9,20
11,14
9,20
11,14
512,56 € inc. VAT List Price 601,37 € inc. VAT
OFFER
SKU: 141-AF32T
Medium weight power feeder with three PU rollers, all spring-loaded to provide excellent non-marking grip. Ideal for a constant feed rate for many machining or cutting tasks of wood and other materials. There is a choice of four feed speeds, easily selectable by removing the side plate and re-positioning the drive gears. Reverse feed is available via a selection switch. The horizontal and vertical position of the drive head can be precisely adjusted with the aid of the two adjusting screws and then securely locked in place with the two handles. The unit can be mounted directly onto the table of the machine, either by bolting through or by screwing into holes tapped into the machine bed, or fitted using the IGM Quick fit universal plate for power feeder.
Smart Tip
Optional accessories for IGM M3 and AF32
423,60 €
Special
• Type: M3 • Rating: Craft • Motor (2300 V): 95 W • Arm Reach: 260 mm • Max. Height under Rollers: 150 mm • Number of Rollers: 3 • Rolers Size: 76 x 30 mm • Feed Speed: 2–12 m/min • Total Weight: 12 kg
IGM Quick fit universal plate 141-DP for feeder M3, AF32 IGM Spare Roller D76x30 for 141-R76 feeder M3 IGM Spare Roller D80x30 for 141-R80 feeder AF32
• Type: AF32 • Rating: Craft • Motor (230 V or 400 V): 240 W • Arm Reach: 260 mm • Max. Height under Rollers: 150 mm • Number of Rollers: 3 • Rollers Size: 80 x 30 mm • Feed Speer: 5–6,5–8–11 m/min • Total Weight: 33kg
268,10 €
- Ideal for router tables, small spindle moulders, surface planers, saws and edgebanding tables. - 3 PU rollers of 76 x 30 mm give excelent non-marking grip. - Variable speed, 2 to 12 m/min plus reverse. - Unique 3D adjustable arm, with 150 mm depth and 260 mm reach. - Light duty unit for the hobby and smaller trade user.
Description
NEW
IGM AF32 Power Feeder 230V/400V
IGM DC30 a DC40 EASY Power Feeders Professional power feeders are suitable for industrial use. Unique design with unmatched flexibility, efficiency, and torque, these are the new IGM EASY professional feeders.
Spare Roller
Quick fit universal plate for unit M3 and AR32.
Smart DC brushless motor, hardened and tempered gears in precision gearbox guarantees more torque and more power for feed. The unit is equipped with the most advanced servo motor with variable speed. With digital controller easily change the speed in range 2-22 m/min. The rollers 120mm diameter and a 60mm width are fitted with special suspension movement for extra grip and to perfectly cope with surface irregularities. If you need to reach near to your tool, you can change standard roller for special thin roller 25 mm wide, it is optional accessory.
- More torque and more efficiency, save over 50% in energy costs. - For professional spindle moulders, planers and saws. - Variable speed 2-22 m/min plus reverse & digital controls. - Smart DC brushless servo motor 375W with high efficient green technology. - Included heavy duty stand with 460 mm reach and tilt indicator. - Swivel adjustment with auto-stop to flip drive head from vertical to horizontal position.
NEW Easy feeders are equipped with unique tilt indicator with swivel adjustment including auto-stop to flip drive head from vertical to horizontal position and vice versa. To proper maintenance also helps lubricant gauge indicator. DC40 with 4 feed rollers.
Spare Roller
Smart Tip
Special OFFER
Optional accessories for IGM DC30 and DC40 Description
Spare Roller narrow
SKU
IGM Swivel cone kit 0 - 90° set for 141-KS feeder DC30-DC40 IGM Spare Roller narrow D120x25 141-R12025 for feeder DC30-DC40 IGM Spare Roller D120x60 for 141-R12060 feeder DC30-DC40
€ exc. VAT
€ inc. VAT
68,50
82,89
13,20
15,98
10,70
12,95
DC30 - 3 rollers
DC40 - 4 rollers
597,00 €
772,00 €
SKU: 141-DC30T
SKU: 141-DC40T
722,37 € inc. VAT List Price 900,24 € inc. VAT
934,12 € inc. VAT List Price 1 164,02 € inc. VAT
• Type: DC30 / DC40 • Rating: Professional • Motor (400 V): 375 W • Arm Reach: 460 mm • Max. Height under Rollers: 250 mm • Number of Rollers: 3/4 • Rollers Size: 120 x 60 mm • Feed Speed: 2–22 m/min • Total Weight: 53 kg/56 kg
IGM Fachmann Digital Level with laser 600mm
IGM Fachmann Digital Level 400mm
Special OFFER
Special OFFER
21,70 €
26,26 € inc. VAT List Price 28,44 € inc. VAT SKU: MDV-002
Digital level is 40 cm long with two levelling vials and multi-functional digital display. It has lots of advanced features. Displays actual angle and a relative angle between two surfaces. Useful directional arrows indicate a declination from the surface or vertical. The display shows both the angle in degrees and the inclination in mm per metre. Function HOLD locks the measured value. Easy to read FLIP-display automatically flips over when you works overhead. Includes battery.
4
Red prices in the tables are already net discounted prices. The discount from list prices can be showed in%.
47,70 €
This 60 cm digital level has two levelling vials, many improvements and lots of advanced 57,72 € inc. VAT features. The display shows both the angle in degrees and the inclination in mm per List Price 63,29 € inc. VAT metre or in percentage. Audio-signalization at 0°, 45° a 90° angles. Heavy gauge alloy SKU: MDV-001 extrusion with a milled bottom surface and protective end caps to achieve the highest accuracy. Useful directional arrows indicate a declination from the surface or vertical. Function HOLD locks on the measured value. Displays actual angle and a relative angle between two surfaces. Easy to read FLIP-display automatically flips over when you works overhead. www.igm.cz
„Reliable sanders with fast exchange of abrasive belt“ JET JSG-64 Belt & Disc Sander
JET JSG-96 Belt & Disc Sander
The machine is suitable for smaller pieces, edges and flat parts, edge rounding and paint removing. Supplied with abrasive with self-adhesive tape. The belt sander unit can be tilted to any angle. Horizontal tilt for sanding bigger surfaces. In this position, use the transverse stop above the belt. If unit is sets vertically, than this stop will serve as supporting table. The disc sander unit is intended for precise work with smaller parts. Combined Sander for a good price and satisfying quality.
The combination of belt sander and fully enclosed disc sander. The cast iron table tilts up to 45° with preset stops at 45° and 90° and is equipped with two T-slots which can be used for fence or circle sanding point. This machine can be mounted directly onto your desktop or onto the optional stand with storage space.
Special OFFER
- Mitre fence in the T-slot. - Folding arm with sanding belt. - Table made from cast aluminium. - Quick tensioning and releasing of sanding belt. • Rating: Hobby • Power Input (230 V): 260 W • Speed: 1800 rpm • Diameter of Disc: 152 mm • Belt Size: 100 x 914 mm • Speed of Belt: 4,8 m/s • Weight: 19 kg
Special OFFER
Sander
477,60 €
577,90 € inc. VAT List Price 607,42 € inc. VAT SKU: 121-JSG-96M
- Sanding disc diameter 230 mm. - Cast iron table with two stops at 45° and 90°. - Sanding belt width 150 mm. - Belt sander is tiltable for vertical or horizontal use. - Graphite slipper plate. - Integrated dust extraction outlet 100 mm.
154,50 €
• Rating: Trade • Power Input (230 V): 950 W • Speed: 1400 rpm • Speed of Belt: 10 m/s • Diameter of Disc: 230 mm • Belt Size: 150 x 1220 mm • Table Tilt: 0° to 45° • Table Size: 190 x 300 mm • Weight: 40 kg
186,95 € inc. VAT List Price 199,17 € inc. VAT SKU: 121-JSG-64
JET JDS-12 Disc Sander Massive cast iron 300 mm disc sander for professionals.
Stand for sander
198,60 €
Special
240,31 € inc. VAT List Price 254,23 € inc. VAT
OFFER
SKU: 121-708597
426,50 €
IGM Fachmann Stick Abrasive Cleaner
SKU: 121-JDS-12M
Ideal tool for extending the lifetime of sandpaper. To easy clean-up of clogged dust residues after grinding. Simply apply the cleaning stick gently to the moving abrasive and it cleans the belt almost like new. Available in size 251 x 38 x 38 mm.
516,07 € inc. VAT List Price 529,50 € inc. VAT
Heavy duty input 950 W induction motor for never-ending sanding. Heavy 415x245 mm cast iron table with pre-set stops at 45° and 90°. The table with T-slots for the mitre guide and the circle sanding pivot point, can be tilted over a range of -15° to +45°. Integrated preset stops at 90° and 45°. Mechanical brake stops the disc sander within seconds and guarantees high operating safety.
Stand for disc sander is not included.
• Rating: Professional • Power Input / Output (230 V): 950 / 700 W • Speed: 1400 rpm • Max. Width / Diameter of Disc: 150 / 300 mm • Table Tilt: +15° to -45° • Weight: 54 kg Mitre gauge and circle sanding pivot point in standard.
JET 22-44 OSC Oscillating Drum Sander The largest opened-ended oscillating drum sander with stand and storage space. Oscillating action guarantees a smooth surface and prolongs the life of the sanding belt. The clever Sand Smart technology of the feed rate automatically reduces feed rate when the machine is overload. Sanding belt and feed belt are included. Double passes can handle an incredible 1120 mm wide and 100 mm thick workpiece.
2 265,12 € inc. VAT List Price 2 491,39 € inc. VAT SKU: 121-2244M
Surface with oscillation.
Smart Tip
Special OFFER
7,20 €
8,72 € inc. VAT List Price 14,16 € inc. VAT SKU: MCBP
„Smooth surface thanks to oscillation“ JET JOVS-10 Oscilating Spindle Sander
„Perfect surface without compromises“
1 872,00 €
Table tilt
This is a very versatile professional sander with oscillation and fully tilting table. It is ideal for all kinds of finishing in workshop. The sander oscillates up and down ensuring that abrasive is not continually exposed at the same point reducing burning and creating a better quality of finish. The large cast iron table gives adequate support to nearly all types of work and can be tilted to a full 45° if required. JOVS-10 ideal for all kinds of finishing in workshop and for professional working to sand straight and curved edges. Supplied with ten sanding bobbins of this diameters 100, 75, 50, 38, 25, 19, 15, 12, 9 a 6 mm.
Special OFFER
Surface without oscillation.
Feed speed variator with SandSmart technology.
Special • Rating: Professional • Power Input: 2,3 kW • Speed: 1400 rpm • Sanding Drum Diameter: 125 mm • Feed Speed: 0–3 m/min • Sanding Thickness: 0,8–100 mm • Min. Workpiece Length: 60 mm • Max. Workpiece Width: 560 (1120) mm • Sanding Belt Width: 75 mm • Oscillation: 70 rpm • Weight: 159 kg
- Unique ‚Sand Smart‘ technology automatically reduces feed rate. - Variable feed speed 0–3 m/min. - Cast iron construction and precise sanding head design. - Specially balanced drum with adjustments for drum and table setting. - Self tensioning device integrated into roller. - Includes lockable stand with storage space. Red prices in the tables are already net discounted prices. The discount from list prices can be showed in%.
OFFER
828,00 €
1 001,88 € inc. VAT List Price 1 473,78 € inc. VAT
• Rating: Professional SKU: 121-JOVS-10M • Power Input / Output (230 V): 1200/700 W • Speed: 1400 rpm - Stable and solid floor stand for stability and vibration free. • Max. Cap at 90°: 160 mm - Optimal table height ensuring comfortable work. • Stroke: 38 mm - 10 grinding spindles with diameters 6–100 mm with fast assembly. • Table Height: 990 mm - Superior bearings ensuring precision moulding of spindle. • Table Size: 610x910 mm - 38 mm long stroke driven by a series of gears working in an oil filled gearbox. • Table Tilting: 0–45° - Oscilate up & down whilst rotating at 1400 rpm for a smooth surface. • Weight: 135 kg - Large cast iron table can be tilted to a full 45°. www.igm.cz
5
„Wood structure will excel with brushing“
JET JBS-22 Brush Sander, brush drum G46
Brush sander JET is designed to create an imitation of old wood with highlighting the fibre structure by brush drum. Optional accesssories allows you to change between brushing, sanding and finishing of profiled workpieces. Brush heads are very effective for profile sanding up to 15mm profile depth and preparing mouldings for finishing. JBS-22 is a unique multipurpose brushing machine. Brush sander is delivered with Abralon 46 grid sanding brush in standard Smart Tip which rotates over the workpieces and removes spring wood fibres.
PLAY VIDEO
Digital display of workpiece thickness.
• Rating: Professional • Power Input: 3500 W • Speed: 1400 rpm • Feed Speed: 0–3 m/min • Brush Drum: 46G • Sanding Thickness: 2–100 mm • Min. Sanding Length: 125 mm • Max. Sanding Width by one pass (two passes): 515 (1030) mm • Weight: 155 kg
- Automatic reduction of feed speed when the machine is overloaded. - Variable speed conveyor belt 0–3 m/min. - Digital screen displays table height. - Extension tables are standard accessory. - Easy change between brushing, sanding and finishing. - Ability to equipped with 5 types of brushes for wide range of surface structures. - Ability to change to the drum sander by exchange brush for sanding drum.
3 007,00 € Variator of feed with SandSmart System.
3 638,47 € inc. VAT SKU: 121-JBS22MA
Brush Drums for JBS-22
Special OFFER
Brush Drums
SKU
€ exc. VAT
€ inc. VAT
Wire 0,5 mm Abralon grossness 46 Abralon grossness 80 Abralon grossness 120 Abralon grossness 240
121-60-6004 121-60-6005 121-60-6001 121-60-6002 121-60-6003
732,00 967,00 967,00 967,00 967,00
885,72 1 170,07 1 170,07 1 170,07 1 170,07
Brush Drums for DDS-225 Optional accessory for JET Double Drum Sander DDS. Each brush drum is supplied in set completely with the pulley including ball bearings. The exchange is therefore simple and fast. Equip your dual drum sander with this brush drum for special wood structuring.
„Final surface just by single pass“ JET DDS-225 Dual Drum Sander 635mm - 75 mm or 100 mm wide abrasives strips can be used. - Rubberised pressure rollers provide perfect and accurate sanding - Table lift on four outstanding threaded rods. - Two speeds of conveyor belt. - Final surface just by single pass. - Accuracy of level 0,2 mm at the whole width up to 635 mm.
Special
Abrasive Abralon
OFFER
Wire 0,5 mm
Nylon finishing
Two sanding drums provide perfect final surface just by single pass. The front drum for effective planning and the rear drum with its micro-setting allows to adjust different height than the front drum, is made for fine finishing. Clever clips rubber coating of the conveyor belt make change of belt and work easier. The conveyor belt is made from rubber-textile material and driven by with two-speed gearbox and intelligent changing of two feed speed for perfect sanding of different types of workpiece. • Rating: Professional • Power Input (400 V): 3,7 kW • Speed of Drums: 1400 rpm • Feed Speed: 2, 3 m/min • Thickness of Sanding: 0,8–133 mm • Min. Length of Workpiece: 230 mm • Width of Abrasive: 75 or 100 mm • Max. Width of Workpiece: 635 mm • Nett Weight: 332 kg
SKU
Wire 0,5 mm Abrasive Abralon Nylon finishing
121-BD225A 1 067,00 1 291,07 121-BD225B 1 214,00 1 468,94 121-BD225C 1 184,00 1 432,64
€ exc. VAT
€ inc. VAT
Easy change of sanding drums to brush drums.
Special OFFER
3 409,00 €
4 124,89 € inc. VAT List Price 4 524,19 € inc. VAT
PLAY VIDEO
SKU: 121-DDS-225
„Oscillation is friendly to wood as well abrasive belt.“
JET JBG Bench Grinders
Special OFFER
JET OES-80CS Oscillating Edge Sander The Oscillating edge sander is made for fine sanding in horizontal and vertical positions or in selected angle. The sanding belt oscillates 50 rpm without scratch on the workpiece. Solid cast iron table can be easily moved up or down with height adjustment to utilise the whole surface of the sanding belt. Drive drum is rubberized and provides maximum power transfer to the sanding belt. Tensioning and oscillation can be easily adjusted. Table stand is very stable and made of steel, it increases stability and minimises vibration. Stand has a large storage space for placing abrasive belts and other tools. Suitable for workshops, maintenance and enthusiastic hobbyists. - Sanding in horizontal and vertical positions or in selected angle. - Oscillation 50 rpm ensures perfect surface. - Robust cast iron table with simple adjustment. - Rubber coated drive drum. - Table height adjustment. € - Floor stand with storage space. 1 153,13 € inc. VAT
953,00
List Price 1 270,50 € inc. VAT SKU: 121-OES-80CST
6
Brush Drums
Red prices in the tables are already net discounted prices. The discount from list prices can be showed in%.
• Rating: Professional • Power Input / Output (400 V): 2,8 / 1,4 kW • Oscillation: 50 rpm • Belt Speed: 16 m/s • Sanding Height: 125 mm • Sanding Width: 760 mm • Table Size: 250 x 750 mm • Table Tilt: 0–90° • Weight: 120 kg
Special OFFER
JBG-150 • Power Input (230 V): 450 W • Speed: 2950 rpm • Wheel Diameter: 150 mm • Weight: 10 kg JBG-200 • Power Input (230 V): 650 W • Speed: 2950 rpm • Wheel Diameter: 200 mm • Weight: 17 kg Stand for bench grinder Description
SKU
€ exc. VAT
€ inc. VAT
Bench Grinder 150mm Bench Grinder 200mm Stand
121-JBG-150 121-JBG-200 121-577172
121,40 176,50 110,00
146,90 213,57 133,10
www.igm.cz
„The most reliable saw thanks to accurate and simple design“ JET JMS-10S Slide Compound Miter Saw 230V
- Induction braked motor with quiet start. - Directly driven saw blade. - Accurate sliding guides. - Cast aluminum workbench. - Speed suitable for cutting all types of materials including mild steel. - Clamp guide. - Rugged construction and robust design.
Special
A fresh look with simple functionality provides overall high rigidity and precision. Mitre saw JMS-10S is intended for professional use and for cutting all types of materials, such as wood, laminate, plastic, duralumin, steel, Cetris, artificial stone and others. A fresh look with a simple functionality provides high rigidity and accuracy overall. The main difference compared to the other mitre saws is that it is fitted with an asynchronous (induction) motor. Thanks to this is almost noiseless and maintenance is reduced to a minimum. It has a higher output power than saws with a carbon engine of the same power. The mitre saw has no gearbox, the saw blade spindle is connected directly to motor shaft. Thanks to this solution, has the same depth of cut at 90° and 45°. Opening the blade guard is independent and is located on the handle for increased security. The motor is equipped with a brake, that stops the blade within a few seconds after switching off. This slide mitre saw is a machine focused on usability, accuracy and safety.
OFFER
• Rating: Professional • Power Input (230 V) : 1600 W • Blade Diameter x Bore: 254 x 30 mm • Blade Speed: 2950 rpm • Bevel angle range: 0°- 45° • Mitre angle range: 45°- 0°- 45° • Max depth x width of Cut at 90° : 60 x 300 mm • Weight: 22 kg
492,30 €
595,69 € inc. VAT List Price 659,58 € inc. VAT SKU: 121-JMS-10SM
„Powerfull motor and laser“
JET JSMS-10LM Slide Mitre Saw with laser
JET JMS-8L Mitre Saw
- 9 preset mitre angles. - Powerful braked motor. - Head slides on rails to give 90 x 305mm cut. - Compound mitre saw supplied with a 250mm TCT blade. - Line sighting laser. - Suitable for laminates. - Clean cuts soft and hard wood. - Timber clamp and support bars up to 103 cm.
Special OFFER
• Rating: Trade • Power Input 230V : 1500 W • Blade Diameter x Bore: 254 x 30 mm • Blade Speed: 4500 rpm • Bevel angle range: 0°- 45° • Mitre angle range: 45°- 0°- 45° • Mitre stops : 0°- 15°- 22,5°- 30°- 45° • Max Depth x Width of Cut at 90°: 90 x 305 mm • Weight: 18 kg
Special OFFER
119,20 €
Ideal for working at maintenance thanks to its low weight. Mitre saw is equipped with powerfull 1,2 kW motro and line sighting laser.
144,24 € inc. VAT List Price 159,72 € inc. VAT SKU: 121-JMS-8LM
• Rating: Trade • Power Input (230 V): 1,2 kW • Blade Diameter x Bore: 210 x 30 mm • Blade Speed: 5000 rpm• Mitre Angle Range: 45° L / 45° R • Max. Depth x Width of Cut at 0°: 60 x 120 mm • Weight: 9 kg
IGM Fachmann Digital Bevel Box +/- 180°, resolution 0,1° - Ability to lock the measured value. - Built-in magnet in the base for accuracy. - Complete with soft case and battery. - Measurement of angles in range +/- 180° with a resolution of 0,1°. - Auto shut off after 5 minutes. - Waterproof.
A top quality, popular slide mitre saw, of compact size with robust design.
217,00 €
262,57 € inc. VAT List Price 286,65 € inc. VAT SKU: 121-JSMS-10LM
IGM Fachmann Digital Angle Finder 270mm, 0°- 220°, resolution 0,05°
Special OFFER
Special OFFER
- Large and easy to read display. - Angle finder and level in one tool. - Measurement of angles in range 0° to 225° with a resolution of 0,05°. - 270 mm ruler.
30,60 €
37,03 € inc. VAT List Price 48,65 € inc. VAT
35,00 €
SKU: FDU-001
42,35 € inc. VAT List Price 56,27 € inc. VAT
Waterproof digital angle finder allows you to measure angles in range +/- 180° with resolution of 0,1°. It is equipped with auto shut off feature after 5 minutes. It is a small enough to be carried around in a pocket and has a built-in magnet in the base for accuracy when measuring bevel angles on mitre saws, saw benches etc.
SKU: FDU-002
This digital angle finder with arm is a measuring instrument with many functions. You can easily measure the angle and also use a ruler of 270 mm length. With ruler you are able to draw cutting line. Large and easy to read display shows you the exact angle from 0° to 225° with a resolution of 0,05°. The body incorporates a levelling vial for use as level. Included battery and full instructions.
Special OFFER
„Champion in its price category“ JET JTS-315SP Table Saw - 230V - Sliding table for accurate cross cutting, angled or straight. - Available in both 400V 3 Phase and 230V 1 Phase for site. - Powerfull braked induction motor. - Eccentric clamping of rip fence with magnifier reading. A ruggedly made all-steel saw with a 2mm thick galvanized table, for use either in the workshop or out on site. Wheels and handles make for easy manoeuvring around the workshop and the legs fold up for transport in a van or estate car.
315 mm TCT blade gives 90 mm depth of cut. • Rating: Trade • Power Input 230V / 400V : 2,2 / 3,1 kW • Power Output 230V / 400V : 1,6 / 2 kW • Blade Dia x Bore: 315 x 30 mm • Blade Speed: 2800 rpm • Blade Tilt: 0°- 47° • Max Depth Of Cut 90° : 90 mm • Weight: 61 kg
Eccentric clamping of rip fence with magnifier reading.
367,30 € Precise guidance of fence support at six bearings and flat steel profile.
Red prices in the tables are already net discounted prices. The discount from list prices can be showed in%.
444,44 € inc. VAT List Price 636,46 € inc. VAT 230V SKU: 121-JTS-315SPM 400V SKU: 121-JTS-315SPT
www.igm.cz
7
„I‘m not only saw, I’m your helper “
Rip fence with integrated fine adjustment.
JET Circular and Panel Saws without Scorer Panel circular table saw JET JTS-600XL is a professional machine. Designed for precision cutting of wood and large board materials with a cutting length on formatting table up to 1600 mm. Thanks to compactness is suitable for small and medium-sized workshops or for factories as an additional machine. Special saw blades for cutting laminates without scorer using on this panel saw improves the cleanliness of cut on the bottom side of boards. Rigid stand, powerful motor and telescopic support table ensure accurate cutting. Dust extraction is provided underneath from the aggregate and the cover of the saw blade.
Special
JET JTS-600XL Panel Circular Saw
JET JTS-600X Table Circular Saw
OFFER
• Rating: Professional • Power (400 V): 2,5 kW • Blade Diameter x Bore: 250 x 30 mm • Max. Depth Of Cut 45°/90°: 54/80 mm • Max. Length/Width Of Cut: 1600/610 mm • Blade Speed: 4000 rpm • Weight: 157 kg
Special OFFER
1 681,00 €
2 034,01 € inc. VAT List Price 2 223,98 € inc. VAT SKU: 121-JTS-600XLT
„The best bandsaw for your workshop and your wallet“ JET JWBS-18Q Bandsaw
• Rating: Professional • Power (400 V): 2,5 kW • Blade Diameter x Bore: 250 x 30 mm • Max. Depth Of Cut 45°/90°: 54 /80 mm • Max. Length/Width Of Cut: 610/610 mm • Blade Speed: 4000 rpm • Weight: 145 kg
This machine is for the professional workshop where an accurate bandsaw with good capacities will excel. We have bandsaw for every type of job for hobby and for professionals too.
1 265,00 €
1 530,65 € inc. VAT List Price 1 652,86 € inc. VAT SKU: 121-JTS-600XT
The JET JWBS-18Q is intended for very heavy work. Triangular design frame provides superior column rigidity. Bandsaw has two blade speeds, balanced cast iron blade wheels, and a superb cast iron table which can tilt from -10° to +45°. The locking rip fence is supported at the front and rear of the table and extends slightly beyond the cast iron table. The mitre fence is T-slotted for accuracy, safety and extended capacity. The blade is guided both above and below the table with micrometer-adjusted thrust bearing and bearing rollers which give a positive support to the blade, resulting in perfect quality of cut and extended blade life. Bandsaw is equipped with magnetic safety switch, interlocked doors and electro-mechanical motor brake. Blade changing is made much easier thanks to the quick release tensioning lever. This machine is for the professional workshop where an accurate bandsaw with good capacities will excel. To move this machine around the workshop we recommend the purchase of the mobile base unit, which allowing you to move bandsaw without fear of tipping the unit over or causing any damage.
„Suitable for modellers and gadgeteers“ JET JWBS-9 Benchtop Bandsaw
Special OFFER
• Rating: Trade • Power Input (230 V): 350 W • Blade Speed: 670 rpm • Blade Width Min.–Max.: 6–10 mm • Max. Width of Cut: 230 mm • Max. Depth of Cut: 80 mm • Table Tilt: 0° to 45° • Weight: 17 kg
Extreme stabile construction TSC (Trianguar Stability Control).
The smalest benchtop bandsaw for small projects. Maximum depth of cut is 80 mm.
152,30 €
- Saw blade 6 mm wide as standard. - Sturdy table made from cast aluminium. - Precise rip fence. - Table tilt up to 45°. - Table work lighting.
184,29 € inc. VAT List Price 202,44 € inc. VAT SKU: 121-JWBS-9M
A small benchtop bandsaw for routine precise work with well-balanced wheels. Robust table 300 x 300 mm can be tilted up to 45 degrees. Standard blade width is 6 mm. The machine is equipped with a quiet induction motor 350 W and work lighting. Maximum depth of cut is 80 mm. Includes a precise rip fence and mitre gauge with aluminium profile with tilting +/- 60°.
Smart Tip
Badsaw Blades
Bandsaw blade for wood is supplied toothed, set, sharpened and welded to the exact length depending on the machine. It is made of high quality carbon steel with a hardness of 38-44 HRC and is designed for cutting wood and similar materials on band saws.
• Rating: Professional • Power Input / Output (400 V): 4,25 kW / 2,2 kW • Blade Width: 3–32 mm • Blade Length: 3480 mm • Blade Speed: 550 a 970 m/min • Max. Width of Cut: 460 mm • Max. Depth of Cut: 300 mm • Table Size: 485x485 mm • Table Tilt: -10° to +45° • Wheel Diameter: 470 mm • Weight: 165 kg
PLAY VIDEO
+ FREE Digital Bevel Box FDU-001
Bandsaw Blade 3480 mm for JWBS-18Q. Bandsaw Blade 1510 mm for JWBS-9. Width x Thickness
Pitch
SKU
6 x 0,5mm 8 x 0,5mm 10 x 0,5mm
4 5 6
M200-001 M200-002 M200-003
8
€ exc. VAT
€ inc. VAT
4,80 4,90 5,00
5,81 5,93 6,05
Width x Thickness
Pitch
SKU
10 x 0,6 mm 12 x 0,6 mm 15 x 0,6 mm 20 x 0,6 mm 25 x 0,6 mm
6 7 7 8 8
M202-003 M202-004 M202-005 M202-006 M202-007
Red prices in the tables are already net discounted prices. The discount from list prices can be showed in%.
€ exc. VAT
€ inc. VAT
7,80 8,00 8,20 9,60 10,30
9,44 9,68 9,93 11,62 12,47
1 493,00 €
1 806,53 € inc. VAT List Price 2 089,67 € inc. VAT SKU: 121-JWBS-18QT
Special OFFER
www.igm.cz
„Woodturning is our life and passion“ Special OFFER
JET JWL-1221VS Woodturning Lathe - Electronic variable spindle speed control 60–3600 rpm. - Smooth transition between forward and reverse and digital readout. - Heavy duty and quiet 730W DC motor with reverse gear. - Completely cast iron construction with extra 17 cm wide lathe bed. - Cast iron tailstock with trapezoidal screw Acme. - Extreme stability and low vibrations. - A new ratchet belt tensioning system, always perfect and quick change. - Ergonomically placed controls on the right side. - Spindle indexed every 15° with 24 indexing positions for fluting or veining.
Easy adjustement of spindle speed.
903,87 € inc. VAT List Price 963,16 € inc. VAT SKU: 121-JWL-1221VS
• Rating: Professional • Spindle Travel: 57 mm • Distance between Centres: 520 mm • Max. Diameter over Bed: 315 mm • Speed: I. 60–900, II. 110–1800, III. 220–3600 rpm • Power Input / Output (230 V): 940/745 W • Spindle Thread: M33x3,5 • Spindle / Tailstock Taper: MK2/MK2 • Spindle / Tailstock Bore: 9,5 mm • Overall Length x Width x Height: 1000 x 365 x 450 mm • Weight: 55 kg Optional accessories: Stand extension
Stand
Bed extension 560 mm
Description
SKU
€ exc. VAT
€ inc. VAT
Bed extension 560 mm Stand Stand extension
121-719201 121-719202 121-719203
161,80 275,80 106,70
195,78 333,72 129,11
Woodturning Lathe is showed with optional accessories.
Special OFFER
JET JWL-1015
Special OFFER
440,90 €
533,49 € inc. VAT List Price 586,73 € inc. VAT SKU: 121-JWL-1015
• Rating: Professional • Distance between Centres: 370 mm • Spindle Thread: M33x3,5 • Spindle/Tailstock Taper: MK2 • Spindle Travel: 50 mm • Overall Length x Width x Height: 890x300x370 mm • Distance over Bed: 255 mm • Weight: 35 kg • Speed: 400, 700, 1000, 1500, 2200, 3300 rpm • Power Input / Output (230V): 500/370 W
Optional accessory. Bed extension 560 mm for JWL-1015 a JWL-1015VS
Rotatable tailstock.
JET JWL-1221VS is compact and revolutionary lathe of new generation full of unique design solutions that make it easier and more pleasant to work with this machine. The entire lathe is designed to have everything under control. Is made of cast iron bed with a respectable 170 mm width of bed providing high stability, low vibrations and better woodturning support. The overall weight has increased to 55 kg. The spindle is stored in massive bearings and is driven through a belt with 730 W motor with a variable speed control and a digital readout, also including a switch to reverse gear. Completely new ratchet belt tensioning system. The spindle can be indexed every 15° using the locking mechanism. The tall and rigid tailstock has an ACME screw, the spindle and the tailstock has both MK2 tapers. All controls – the variable speed control, the digital readout, the selector of forward or reverse gear – are placed together on the right side. This great innovative lathe can be upgraded with the stand, the bed extension 560 mm and the stand extension. No doubts, it is the best small sized lathe for professional use, ideal for production of small and medium workpieces.
„Perfect tool is very important for woodturning“ IGM Woodturning Chisel Set Fachmann Start 6 pcs
Special
IGM Woodturning Chisel Set HSS Professional 6 pcs
98,90 €
SKU: 121-719101
Smart Tip
OFFER
36,30 €
166,00 €
SKU: 140-set01
SKU: 140-set10
43,93 € inc. VAT List Price 46,35 € inc. VAT
119,67 € inc. VAT List Price 131,65 € inc. VAT
JET JWL-1440VS Woodturning Lathe The JET JWL-1440VS is the second successful series of robust medium sized lathes JET, which excel of robust cast iron construction, a lot of power, precision and flexibility, that is all necessary for great woodturning. The spindle is stored in massive bearings and is driven through a belt with 750 W motor with a variable speed control and with a digital display on the LCD. The spindle can be indexed every 10° using the locking mechanism.
747,00 €
200,86 € inc. VAT List Price 211,88 € inc. VAT
High quality woodturning chisels or gutters made from selected superior High-speed steel (hardness 64HRC) or tool Alloy steel (hardness 60HRC). It is tempered for durability and excellent cutting capabilities. They are polished or all-grinded (HSS). Precisely hand-made sharpened. Ergonomic handles are made from selected beech wood, varnished or waxed (HSS). Designed for woodturning by hand of softwood or softwood and hardwood (type HSS). Made in the Czech Republic for IGM.
Special OFFER
This Woodturning lathe offers the wide range of excellent properties, such as rotating and sliding of tailstock, unique optional bed extension. Standard is table mounted version without stand, stand and cast iron bed extension 508 mm can be purchased as optional accessories. It can be clamped into the three separate positions for face turning of large diameters with a capacity up to 800 mm or to extend the turning length up to Lathe 1524 mm. No doubts, it is the best medium sized lathe for professional use. €
1 309,00
1 583,89 € inc. VAT List Price 1 739,98 € inc. VAT SKU: 121-JWL-1440VS
Stand (two legs) Optional accessory.
PLAY VIDEO
279,50 €
338,20 € inc. VAT List Price 367,84 € inc. VAT SKU: 121-719402
From above. - Completely cast iron construction with extra wide lathe bed. - Cast iron tailstock rotates to 360° with 7 pre-set positions. - Indexing positions 0, 30, 60, 90, 120, 180 and 270 degrees for maximal variability and optimal comfort. - Continuous electronic variable speed control 280–2500 rpm. - Improved locking positions and extended lift supports. - Trapezoidal sliding thread of tailstock with screw Acme for drilling operations. - Digital speed display is easy to read. - A powerful 750 W motor. - CE certification. - Optional accessories bed extension 508 mm and cast iron stand (two legs).
• Rating: Professional • Power Input (230 V): 750 W • Speed: 280–2500 rpm • Max. Diameter over Bed: 370 mm • Distance between Centres: 1100 mm • Spindle Thread: M33x3,5 • Spindle / Tailstock Taper: MK2 / MK2 • Spindle / Tailstock Bore: 9,5 mm / 9,5 mm • Spindle Travel: 108 mm • Overall Length x Width x Height (with Stand): 1840 x 535 (630) x 550 (1400) mm • Weight: 100 kg
Red prices in the tables are already net discounted prices. The discount from list prices can be showed in%.
Special OFFER
JET Bed Extension 508mm for lathe JWL-1440VS The bed extension 508 mm to increase the maximum turning diameter up to 1524 mm for woodturning lathe JWL 1440VS. Can be mounted in 3 different positions directly onto the lathe bed which offers useful length for spindle.
Bed extension Optional accessory.
209,60 €
253,62 € inc. VAT List Price 273,46 € inc. VAT SKU: 121-719401
www.igm.cz
9
„The power of eficiency.“
„Make mortises fast, clear and cheap“ JET 719A Mortiser
JET Dust & Chip Collectors with Vortex Cone
Special OFFER
A professional floor standing mortiser with heavy-duty cast iron table and lockable stand for storage of chisels, bits and service tools. The powerful 1,3 kW motor allows you to produce 25 mm wide mortises. Table travel is ensured by two wheels, one for longitudinal and a second for traverse motion. The dovetail slideways ensures smooth movement in both directions with lock on the fore and aft setting. The main operating handle has a clever ratchet setting which allows it to be quickly set in the correct position for optimum leverage. Depth stop with quick pre-set is simple and very effective to use. Along the back of the main table is a mortice length setting device which allows the mortice length to be pre-set for reduced marking out. Head rotates 180° for excellent door lock morticing without complicated handling. Supplied with cabinet base, chisel bushings and service tools. Mortising chisels are supplied as optional.
Features - Unique technology “Vortex Cone” waste separation design, keeps filters cleaner. - A high efficiency unique steel fan, quiet running. - Four castor wheels for better mobility. - Quick-connect collection PLAY bags with elastic band for VIDEO fast, easy installation and removal. JET dust collectors are intended for long term operations with high pressure and great performance.
Special OFFER
Precise dovetail slideways.
• Rating: Professional • Power Input / Output (230 V): 1300 / 950 W • Speed: 1450 rpm • Max. Chisel Size: 25 x 25 mm • Chuck: 13 mm • Max. Workpiece Height: 195 mm • Table Size: 180 x 520 mm • Weight: 125 kg
Robustly built and efficient in design will suit for the most requirements of joinery workshops. Powerful motor and specially designed air fan for high performance and quiet running without vibrations. The dust collector is equipped with a highly efficient steel fan and unique technology “Vortex Cone”, which maintains a high collection performance and prevents premature clogging of the filter. Very quick installation. Fitted with castors for total mobility around the workshop. Supplied with five collection bags and a 30 microns filter bag. A hose is not included.
Special OFFER
SKU: 121-719A-MDA
JET JBM-5 Mortiser
Special
Smart Tip Transparent extraction hose for 100mm outlet
- Ratchet setting on main operating handle. - Effective adjustable depth stop. - Adjustable cast iron fence. - Vertical clamping and releasing of workpiece. - Pull down lever has a spring-loaded splined mounting. - Cast iron table with MDF board.
OFFER
For suction of lightly abrasive materials (wood shavings, chips), dust, smoke, etc. High quality flexible 102 mm transparent PU (Polyurethane) extraction hose in lenghts 2,5 m; 5 m or 10 metres. This is ideal for those with a single mobile extractor being used on various machines around the workshop. Accommodate extraction outlets around 100mm diameter. Supplied in a compressed state. Hose length corresponds to the maximum extension. Dĺžka
SKU
2,5 m 5m 10 m
FHP-100025 FHP-100050 FHP-100100
€ exc. VAT
€ inc. VAT
18,10 35,00 66,20
21,91 42,35 80,11
„Clean air improves health and make work easier“
Includes: - Chuck 13 mm - Depth stop - Cabinet base with storage space - Drilling bushes (15,8; 19; 20,6 and 46 mm) - Large Workpiece Jig
- Ratchet setting on main operating handle. - Dovetail slideways and hydraulic piston ensures smooth movement. - Side stop for drilling multiple parts and effective depth stop - Quick clamping and releasing of workpiece. - Powerful motor and switch gear are virtually silent in operation - Maximum chisel capacity 25 mm. - Head rotates 180° for door locks mortising.
DC-1900A • Rating: Professional • Power Input: 4,25 kW (400V) • Max. Pressure: 1800 Pa • Air Flow, hose 150 mm: 2900 m3/h • Bag Capacity: 2x 200 l • Particle Size: 30 microns • Weight: 86 kg
• Wall: smooth inside, clear, PU (polyurethane, ester base), constant wall thickness 0,4 mm for all diameters • Reinforcement: coppered steel spiral • Halogen-free (RoHS) • Resistance: abrasive, mineral oils, ozone and weathering • Operating temperature: -40°C to +90°C
956,00 €
1 156,76 € inc. VAT List Price 1 232,99 € inc. VAT
86,64 € inc. VAT List Price 100,80 € inc. VAT
SKU: 121-DC-1900AT
DC-1100A • Rating: Professional • Power Input: 1,9 kW (230V) • Max. Pressure: 1700 Pa • Air Flow, hose 150 mm: 1620 m3/h • Bag Capacity: 200 l • Particle Size: 30 microns • Weight: 55 kg
OFFER
Stand with storage space.
71,60 €
975,26 € inc. VAT List Price 1 040,60 € inc. VAT
SKU: 121-DC-1100A
Special
SKU: 121-719A-M
806,00 €
471,66 € inc. VAT List Price 519,82 € inc. VAT
Side stop for drilling multiple parts.
Table movement in both directions.
JET Clamp for oversize elements for mortiser 719A Optional accessory.
389,80 €
Head rotates 180° for door locks mortising.
Table surface is MDF.
326,90 €
395,55 € inc. VAT List Price 435,60 € inc. VAT SKU: 121-JBM-5
For Hobbyists JET JDP Bench Pillar Drills
• Rating: Trade • Power Input / Output (230 V): 700 / 350 W • Speed: 1450 rpm • Chuck: 10 mm • Max. Chisel Size: 12 x 12 mm • Max. Workpiece Height: 100 mm • Max. Chisel Stroke: 120 mm • Table Size: 345 x 150 mm • Weight: 23 kg
For Workshops and Professionals JET JDR Radial Drills
JET AFS-1000B Air Filtration System The efficiency of the filter is 98 % of 5 microns large particles and 85 % 1 micron large particles. The remote control has three settings of air movement speed, and the three different timing 2, 4 and 8 hours. Important advantage of filtration system is saving of heating energy, because there is no outside air cooling. An optional charcoal filter is available.
Special
- Powerful engine 200 W. - Suitable for ceiling mounting. - Main pleated filter and electrostatic pre-filter. - Remote control. - Three motor speed settings. - Three time settings 2, 4 and 8 hours.
OFFER
• Rating: Professional • Power Input (230 V): 200 W • Air Movement: 12, 15, 20 m3/min • Outer Filter: 5 microns • Inner Filter: 1 micron • Weight: 25 kg
10
319,90 €
387,08 € inc. VAT List Price 427,38 € inc. VAT SKU: 121-AFS-1000BM
Red prices in the tables are already net discounted prices. The discount from list prices can be showed in%.
JDR-34
JDR-34F
110,30 €
371,40 €
430,20 €
SKU: 121-JDP-8L
SKU: 121-JDR-34
SKU: 121-JDR-34F
133,47 € inc. VAT List Price 136,49 € inc. VAT
Quiet cleaning and filtrating of air in workshop. The efficiency of the filter is 98 % of 5 microns large particles and 85 % 1 micron large particles.
OFFER
OFFER
OFFER
JDP-8L
Special
Special
Special
• Rating: Hobby • Power Input (230 V): 350 W • Speed Range: 580–2650 rpm • Number of Speed: 8 • Max. Chuck to Table: 104 mm • Chuck Travel: 50 mm • Chuck Captype: 13 mm • Table Size: 160 x 160 mm • Diameter Of Column: 47 mm • Weight: 19 kg
449,40 € inc. VAT List Price 452,54 € inc. VAT
• Rating: Professional • Power Input (230 V): 350 W • Speed Range: 500–2500 rpm • Number of Speed: 5 • Chuck Travel: 80 mm • Chuck Captype: 16 mm • Table Size: 220 x 220 mm • Weight: 42 kg
520,55 € inc. VAT List Price 529,50 € inc. VAT
• Rating: Professional • Power Input (230 V): 350 W • Speed Range: 500–2500 rpm • Number of Speed: 5 • Max. Chuck to Table: 155–410mm • Chuck Travel: 80 mm • Spindle Taper MK-2 • Chuck Captype: 16 mm • Table Size: ? 300mm • Diameter Of Column: 73 mm • Weight: 61 kg www.igm.cz
„Hard and thick enough cutting teeth“
2,1mm
OFFER
Fachmann M112 Pattern router bits with bearing
bits for router
Pattern bit is equipped with a top bearing above the cutter to let you work with a template placed on the workpiece. Ideal bit to produce cabinet and furniture pieces, signs, toys and any other creative projects.
Straight router bit Fachmann for those who need quality grooves. Precisely sharpened and suitable for hard and soft wood, plywood, glued wooden materials and plexiglass or other plastics, partially suitable for laminated chipboards. Shank = ø8 mm
Shank = ø8 mm D
I
L
SKU
12
25 25
61 65
M112-12081 M112-16081
16
Fachmann M110, M111 Straight router bits with TC plunge tip
Fachmann M100 Straight router bits
Special
€ exc. VAT
€ inc. VAT
13,10 18,00
15,86 21,78
€ exc. VAT
€ inc. VAT
26,10
31,59
Shank = ø12 mm
D
I
L
SKU
4 6 8 10 12 12 12,55 16 16 20
12 25 25,4 25 25 40 25,4 25 35 25
57,5 68 68,4 65 65 80 65,4 65 75 65
M100-04081 M100-06081 M100-08081 M100-10081 M100-12081 M100-12181 M100-12781 M100-16081 M100-16181 M100-20081
€ exc. VAT
€ inc. VAT
8,00 8,70 9,10 9,10 9,60 12,70 14,30 13,80 15,20 14,10
9,68 10,53 11,02 11,02 11,62 15,37 17,31 16,70 18,40 17,07
€ exc. VAT
€ inc. VAT
14,30
17,31
Shank = ø12 mm
D
I
L
SKU
19
50
93,9
M112-19021
I
L
SKU
12
50
92,1
M100-12521
Special OFFER
OFFER
Hardwood Laminate Chipboard MDF
Corian
Router cutter with one mini-knife fixed by wedge. Longitudinal and cross groove for better setting-up and increased safety of the knife against axial movement. For routing and finishing, plunge cutting and grooving on boards (laminate, chipboard, MDF) or hardwood, soft wood and laminated timber. Use on hand held routers, router tables or CNC machines.
Hardwood Laminate Chipboard MDF
Z
SKU
€ exc. VAT
€ inc. VAT
43,40 43,40
52,52 52,52
Shank = ø12 mm DxI
Z
SKU
8 x 20 20 x 4,1 x 1,1 F041-08021 10 x 30 30 x 5,5 x 1,1 F041-10021
12 x 50 50 x 5,5 x 1,1 F041-12521
€ exc. VAT
€ inc. VAT
43,40 43,40 51,50
52,52 52,52 62,32
For cutting of:
Shank = ø8 mm DxI
Z
SKU
16x28,3
28,3x12x1,5
F045-16381
Corian
€ exc. VAT
€ inc. VAT
43,00
52,03
€ exc. VAT
€ inc. VAT
47,90
57,96
Shank = ø12 mm DxI
Z
SKU
16x48,3
48,3x12x1,5
F045-16521
OFFER
Straight router cutter with one plunging carbide blade and one cutting carbide knife. Excellent performance at plunging into the hardwood and boards. Shank with 20 mm diameter for safe clamping in CNC machines at high-speed feed. Use for hand held routers as well.
Laminate
SKU
16x28,3
28,3 x 12 x 1,5 7,5 x 12 x 1,5
F044-16381
€ exc. VAT
€ inc. VAT
43,00
52,03
€ exc. VAT
€ inc. VAT
48,20
58,33
Shank = ø12 mm DxI
Z
SKU
16x48,3
48,3 x 12 x 1,5 7,5 x 12 x 1,5
F044-16521
IGM Fachmann M138 Roundover router bit
Special OFFER
The round-over bit is suitable for decorating of massive wood edges or rounding over of glued ABS edges. The bearing at its bottom gives a perfect guiding of the tool and a good and constant stock removal.
DxI
Chipboard
Z
SKU
12x29,5* 29,5 x 9 x 1,5 12x39,5 39,5 x 9 x 1,5
F047-12381 F047-12281
D
I
SKU
2
17,3
9,5
M138-02081
D
I
L
SKU
€ exc. VAT
€ inc. VAT
12
50
92,1
M111-92521
23,40
28,32
Depth gauge 60 mm wide aperture, accuracy to 0,5 mm and 80 mm measurement range. Steel ruler with 2 scales - metric and imperial.
80,90 €
97,89 € inc. VAT List Price 105,27 € inc. VAT SKU: 121-JRT-1M
Router Table is the best choice for precise routing with larger router bit, maximal 50 mm diameter. Table is equipped with magnetic switch with possibility to connect the plunge router up to power 1600W. Table extension (on the left and right side) with 1030 mm length, router fence with clear safety guard, table feather board and mitre fence are included. Table is intended for bench or base placement.
Uvex i-3 Safety Glasses, lens clear, orange-blue
Special OFFER
Lenses are scratch resistant and absorbs 100 % of UV radiation.
Z
SKU
14 x 49,5 49,5 x 9 x 1,5
F047-14521
IGM F062 Roundover Router Cutter HM - R2 D27x3 L58 S=8
€ inc. VAT
R
D
I
L
SKU
14,30
17,31
2
27
3
58
F062-02081
Red prices in the tables are already net discounted prices. The discount from list prices can be showed in%.
7,99 € inc. VAT List Price 14,17 € inc. VAT SKU: 103-9190145
„Build your own Router Table“ IGM Mitre fence ABS moulded for router tables
SKU: FRT2-999
Special OFFER
€ exc. VAT
€ inc. VAT
32,50 41,00
39,33 49,61
€ exc. VAT
€ inc. VAT
32,10
38,85
Special OFFER
21,00 €
25,41 € inc. VAT List Price 29,53 € inc. VAT SKU: FRT2-114
This rugged phenolic insert plate is designed to provide a solid, flat, and perfectly level mounting surface for your router in your own router table or workbench. This 6mm thick plate comes without any predrilled mounting holes and it is equipped with 4 leveling screws for leveling with the router table. Supplied with 2 plastic reducing rings that allow you to easily change the size of the opening around the router bit and threaded lead-in pin. The insert plate will accommodate most portable routers and should be drilled to individual requirements. Includes 30 mm and 60 mm reducing rings, lead-in pin, magnets, leveling screws. Plate dimensions 306 mm x 229 x 6 mm.
For perfect adjustment of angle during routing. The scale ± 60 degrees. Aluminium track and grooved machine bed. Integrated end stop.
IGM Feather board ABS moulded for router tables
Special OFFER
8,10 €
9,81 € inc. VAT List Price 12,47 € inc. VAT SKU: FRT2-998
For horizontal or vertical pressure guard. Ideal accessory for router tables, spindle moulders or band saws. Prevents the material from being thrown back by the cutter.
IGM Electric Safety Switch 230V, CE It provides quick and easy access to switch on-off your router table. The switch can be mounted directly to the router table leg or at another appropriate place.
Special OFFER
€ exc. VAT
6,60 €
13,19 € inc. VAT List Price 15,37 € inc. VAT
Shank = ø8 mm
R
23,72
10,90 €
Roundover Router Cutter for rounding and trimming operations. Radius R2mm is for rounded ABS edges. The blades are 4 side profiled and give high economy and maximum tool efficiency. For use on portable routers.
Shank = ø8 mm
€ inc. VAT
19,60
A great metal rule depth gauge to set height of router cutters and saw blades accurately. Ideal for horizontal and vertical measuring in spindle moulders, router tables and table saws. U- section plastic injection moulding with unique cam lever lock. Precisely processed abutment surfaces allows self-standing on the working table.
OFFER
* l=40 pre postupné obrábanie
Shank = ø12 mm DxI
€ exc. VAT
SKU: 102-GAUGE/1
Special
Shank = ø8 mm
Z
M110-92081
13,68 € inc. VAT List Price 15,01 € inc. VAT
OFFER
Straight Router Cutter is equipped with plunging knife, which simplify plunging into the material. DxI
SKU
80
IGM Router table insert plastic plate, 306x229x6mm, opening D30-66-98mm
Special cutting edge geometry for economical cutting of laminate and chipboard. The construction of router cutter type F47-123 for cutting depth of 40 mm even with 29,5 × 9 × 1,5 mm carbide knife in the case of multiplepass cutting. Excellent for cutting, sizing and grooving on laminate or kitchen worktops. Use on hand held routers or in CNC machines.
Shank = ø8 mm
L
40
11,30 €
Special
For cutting of:
Special
Hardwood Laminate Chipboard MDF
Corian
IGM F047 Straight Router Cutters Z1
IGM F044 Straight Router Cutters Z1 + 1 plunging
I
12
• Magnetic Switch: 230 V, 50-60 Hz • Max. Power: 1600 W (P1) • Max. Router Bit Diameter: 50 mm • Fence Size: 540 x 75 mm • Table Size with Extensions: 1030 x 360 mm • Weight: 10 kg
Straight bits with two turnover blades with 4 cutting edges. Plunging edge of reversible blades cut at an angle 3° to facilitate the successive plunging into material. Smooth cut without any burrs or ridges. For routing and finishing, plunge cutting and grooving.
Shank = ø8 mm 8 x 20 20 x 4,1 x 1,1 F041-08081 10 x 30 30 x 5,5 x 1,1 F041-10081
D
OFFER
OFFER
IGM F045 Straight Router Cutters Z2 For cutting of:
DxI
Shank = ø8 mm
Special
Special
Special
For cutting of:
Straight router bits FACHMANN with plunge carbide tip are ideal for plunge routing operations. Special plunge carbide tip for easier penetration of the bit into the wood and routing tear-out Special plunge free grooves. Precisely carbide tip for sharpened and easier penetration suitable for hard and of the bit into the soft wood, plywood, wood. glued wooden materials and plexiglass or other plastics, partially suitable for laminated chipboards.
JET JRT-1 Router Table
„Long-lasting router cutters“ IGM F041 Straight Router Cutters Z1
Expert Line
Shank = ø12 mm
D
Smart Tip
Depth gauge, Metric/Imperial
€ exc. VAT
€ inc. VAT
38,10
46,11
45,40 €
54,94 € inc. VAT List Price 60,38 € inc. VAT SKU: FRT2-997
www.igm.cz
11
„Anyone can glue in high quality, just start.“ Glue Feeders
Storage pocket for pistol.
High quality and trouble-free pressure glue feeders dramatically reduce the working time during gluing or paint spraying in comparison with conventional method of application. Intended for dispersing watersoluble glues (PVA), for high-strength joints of wood. IGM glue feeders are reliable, efficient and easy to maintain. In our offer is a variety of optional nozzles for joints, for edges, for grooves, for surface applications, and other solutions. On special order are also available special glue feeders for application of PUR-glue or automatic glue machines for different types of operations. Request an offer. Made for IGM by italian company PIZZI with 50-year tradition. Equipped with a pressure valve, pressure gauge, precise locking system and a storage pocket for pistol. The supply also includes one application pistol with adjustable amount of glue flow. Can be extra equipped with another application pistol (max. total two). Glue application is smooth and constant, there is no interruption in glue flow such as at manual glue application. After complete filling of the container with glue, close the cover and pressurise the container up to a maximum 5 bar. Now disconnect the glue feeder from the compressor. The glue feeder operates to minimal pressures 1–0,5 bar. Then you have to repressurise the container. There is a variety of optional nozzles and applicators.
PLAY VIDEO
Precise calibrated manometer.
Applicators - nozzles
Special OFFER
440,90 €
In our offer is a variety of optional nozzles for joints, for edges, for grooves, for surface applications, and other solutions etc.
533,49 € inc. VAT List Price 637,31 € inc. VAT SKU: 136-9001
IGM A8 Glue feeder for PVA, steel, 8 kg capacity • Pressure Container: Steel • Capacity: 8 kg • Maximal Pressure: 5 bar • Weight: 14 kg • Overall (LxWxH): 20 x 20 x 65 cm
Steel handle of pistol for precise amount of glue flow.
„Four years together with Titebond.“ Titebond II Premium Waterproof wood glue
Titebond III Ultimate Extreme waterproof wood glue
Nozzles
SKU
Double dowel nozzle 32mm For edges - 10-30mm For grooves - 4x30mm Gluing cylinder - 180mm width
136-0009 136-0016 136-0024 136-0033
Special
€ exc. VAT
€ inc. VAT
38,40 44,70 44,70 70,60
46,47 54,09 54,09 85,43
Woodworkers Glue Bottle Kit
OFFER
Basic Line
Easy way how to apply glue into the hole for biscuit joint is blade applicator. Just pour glue into the bottle. Put nozzle for thin biscuit joint and push the bottle, which gets glue right inside the hole for biscuit. Perfect biscuit joint.
nd glue o b e t i T r o f Titebond II Dark Wood Glue D3, 237ml Plastic Bottle
Special
4,90 €
3,40 €
5,93 € inc. VAT List Price 6,42 € inc. VAT
4,12 € inc. VAT List Price 4,60 € inc. VAT
OFFER
SKU: 125-999309
SKU: 123-3703
Množstvo
SKU
€ exc. VAT
€ inc. VAT
Množstvo
SKU
€ exc. VAT
€ inc. VAT
237 ml 946 ml 3,78 l 18,92 l
123-5003 123-5005 123-5006 123-5007
3,20 7,90 21,50 102,90
3,88 9,56 26,02 124,51
237 ml 946 ml 3,78 l 18,92 l
123-1413 123-1415 123-1416 123-1417
4,50 10,90 30,30 141,20
5,45 13,19 36,67 170,86
- High strength dispersion glue. - Interior use only. - Shorter open time. - Fast setting time to help minimise clamping time. - Bonds stronger than wood itself. - Excellent resistance to most solvents. - Excellent sandability and unaffected by finishes. - Universal - glues wood, fibreboard, high-pressure laminates and particle boards, cloth, leather. - Easy cleanup with water.
- Extreme waterproof wood glue with superior strength. - Designed for exterior & interior applications. - D4 water-resistance and solvent resistant. - Superior strength, strong initial tack. - Longer open assembly time. - Lower application temperature. - Excellent sandability. - Universal - suitable for wood cloth and leather. - Waterproof formula that cleans up with water.
Tool body from high quality steel or light and hard aluminium with bore 30mm. Equipped with special locking system with threaded pins for perfect positioning of Euro knives and limitors for safety works. Design to accept all profiles of Euro knives series F26 in cutting heights 40 mm or 50mm and limitors series F027. Supplied without knives and limitors. Ideal for all types of spindle moulders.
Cutting width 40–50 mm.
Cutting width 40 mm
F026-000 F027-000
SKU
F026-097 F027-097
12
€ exc. VAT
€ inc. VAT
10,30 8,20
12,47 9,93
€ exc. VAT
€ inc. VAT
10,30 8,30
12,47 10,05
SKU
F026-016 F027-016
SKU
F026-098 F027-098
Easy adhesive application for any planar gluing. Just pour glue into the bottle and it can be immediately accessed. Pull out the plug and apply glue into the roller for surface application. Quick and clean. For use with PVA and aliphatic resins.
„Quick and inexpensive change of profile mouldings“
IGM F020 Universal Cutter Head MAN
SKU
Dark-dyed version of Titebond II Premium Wood Glue. Titebond II Dark Wood Glue is the only leading brand, onepart wood glue that passes EN 204 Type D3 waterresistance specification. Helps any woodworker achieve professional-looking results of deep brown coloured wood.
€ exc. VAT
€ inc. VAT
10,30 8,30
12,47 10,05
€ exc. VAT
€ inc. VAT
10,30 8,30
12,47 10,05
SKU
F026-066 F027-066
SKU
F026-099 F027-099
€ exc. VAT
€ inc. VAT
10,30 8,30
12,47 10,05
€ exc. VAT
€ inc. VAT
10,30 8,30
12,47 10,05
SKU
F026-083 F027-083
SKU
F026-100 F027-100
Red prices in the tables are already net discounted prices. The discount from list prices can be showed in%.
Description
D
SKU
steel steel aluminium aluminium
100 120 100 120
F020-10030 F020-12030 F021-10030 F021-12030
€ exc. VAT
€ inc. VAT
10,30 8,30
12,47 10,05
€ exc. VAT
€ inc. VAT
10,30 8,30
12,47 10,05
SKU
F026-084 F027-084
SKU
F026-127 F027-127
€ exc. VAT
€ inc. VAT
40,80 57,60 51,00 66,30
49,37 69,70 61,71 80,23
€ exc. VAT
€ inc. VAT
10,30 8,30
12,47 10,05
€ exc. VAT
€ inc. VAT
10,30 8,30
12,47 10,05
Price of knives and limitors is always per 2 pieces! F026 includes 2 knives and F027 includes 2 limitors. Cutting width 50 mm
SKU
F026-522 F027-522
€ exc. VAT
€ inc. VAT
20,90 18,20
25,29 22,03
SKU
F026-546 F027-546
€ exc. VAT
€ inc. VAT
20,90 18,20
25,29 22,03
SKU
F026-576 F027-576
€ exc. VAT
€ inc. VAT
20,90 18,20
25,29 22,03
www.igm.cz